/* * Allwinner sunxi AHCI SATA platform driver * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl> * Copyright 2014 Hans de Goede <hdegoede@redhat.com> * * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov * Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>, * Daniel Wang <danielwang@allwinnertech.com> * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. */ #include <linux/ahci_platform.h> #include <linux/clk.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> #include "ahci.h" #define DRV_NAME "ahci-sunxi" /* Insmod parameters */ static bool enable_pmp; module_param(enable_pmp, bool, 0); MODULE_PARM_DESC(enable_pmp, "Enable support for sata port multipliers, only use if you use a pmp!"); #define AHCI_BISTAFR 0x00a0 #define AHCI_BISTCR 0x00a4 #define AHCI_BISTFCTR 0x00a8 #define AHCI_BISTSR 0x00ac #define AHCI_BISTDECR 0x00b0 #define AHCI_DIAGNR0 0x00b4 #define AHCI_DIAGNR1 0x00b8 #define AHCI_OOBR 0x00bc #define AHCI_PHYCS0R 0x00c0 #define AHCI_PHYCS1R 0x00c4 #define AHCI_PHYCS2R 0x00c8 #define AHCI_TIMER1MS 0x00e0 #define AHCI_GPARAM1R 0x00e8 #define AHCI_GPARAM2R 0x00ec #define AHCI_PPARAMR 0x00f0 #define AHCI_TESTR 0x00f4 #define AHCI_VERSIONR 0x00f8 #define AHCI_IDR 0x00fc #define AHCI_RWCR 0x00fc #define AHCI_P0DMACR 0x0170 #define AHCI_P0PHYCR 0x0178 #define AHCI_P0PHYSR 0x017c static void sunxi_clrbits(void __iomem *reg, u32 clr_val) { u32 reg_val; reg_val = readl(reg); reg_val &= ~(clr_val); writel(reg_val, reg); } static void sunxi_setbits(void __iomem *reg, u32 set_val) { u32 reg_val; reg_val = readl(reg); reg_val |= set_val; writel(reg_val, reg); } static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val) { u32 reg_val; reg_val = readl(reg); reg_val &= ~(clr_val); reg_val |= set_val; writel(reg_val, reg); } static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift) { return (readl(reg) >> shift) & mask; } static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base) { u32 reg_val; int timeout; /* This magic is from the original code */ writel(0, reg_base + AHCI_RWCR); msleep(5); sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19)); sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, (0x7 << 24), (0x5 << 24) | BIT(23) | BIT(18)); sunxi_clrsetbits(reg_base + AHCI_PHYCS1R, (0x3 << 16) | (0x1f << 8) | (0x3 << 6), (0x2 << 16) | (0x6 << 8) | (0x2 << 6)); sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15)); sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19)); sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, (0x7 << 20), (0x3 << 20)); sunxi_clrsetbits(reg_base + AHCI_PHYCS2R, (0x1f << 5), (0x19 << 5)); msleep(5); sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19)); timeout = 250; /* Power up takes aprox 50 us */ do { reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28); if (reg_val == 0x02) break; if (--timeout == 0) { dev_err(dev, "PHY power up failed.\n"); return -EIO; } udelay(1); } while (1); sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24)); timeout = 100; /* Calibration takes aprox 10 us */ do { reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24); if (reg_val == 0x00) break; if (--timeout == 0) { dev_err(dev, "PHY calibration failed.\n"); return -EIO; } udelay(1); } while (1); msleep(15); writel(0x7, reg_base + AHCI_RWCR); return 0; } static void ahci_sunxi_start_engine(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); struct ahci_host_priv *hpriv = ap->host->private_data; /* Setup DMA before DMA start */ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400); /* Start DMA */ sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START); } static const struct ata_port_info ahci_sunxi_port_info = { .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_platform_ops, }; static struct scsi_host_template ahci_platform_sht = { AHCI_SHT(DRV_NAME), }; static int ahci_sunxi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; int rc; hpriv = ahci_platform_get_resources(pdev); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); hpriv->start_engine = ahci_sunxi_start_engine; rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; rc = ahci_sunxi_phy_init(dev, hpriv->mmio); if (rc) goto disable_resources; hpriv->flags = AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | AHCI_HFLAG_YES_NCQ; /* * The sunxi sata controller seems to be unable to successfully do a * soft reset if no pmp is attached, so disable pmp use unless * requested, otherwise directly attached disks do not work. */ if (!enable_pmp) hpriv->flags |= AHCI_HFLAG_NO_PMP; rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, &ahci_platform_sht); if (rc) goto disable_resources; return 0; disable_resources: ahci_platform_disable_resources(hpriv); return rc; } #ifdef CONFIG_PM_SLEEP static int ahci_sunxi_resume(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; int rc; rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; rc = ahci_sunxi_phy_init(dev, hpriv->mmio); if (rc) goto disable_resources; rc = ahci_platform_resume_host(dev); if (rc) goto disable_resources; return 0; disable_resources: ahci_platform_disable_resources(hpriv); return rc; } #endif static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend, ahci_sunxi_resume); static const struct of_device_id ahci_sunxi_of_match[] = { { .compatible = "allwinner,sun4i-a10-ahci", }, { }, }; MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match); static struct platform_driver ahci_sunxi_driver = { .probe = ahci_sunxi_probe, .remove = ata_platform_remove_one, .driver = { .name = DRV_NAME, .of_match_table = ahci_sunxi_of_match, .pm = &ahci_sunxi_pm_ops, }, }; module_platform_driver(ahci_sunxi_driver); MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver"); MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>"); MODULE_LICENSE("GPL");