# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) name: netdev doc: netdev configuration over generic netlink. definitions: - type: flags name: xdp-act render-max: true entries: - name: basic doc: XDP features set supported by all drivers (XDP_ABORTED, XDP_DROP, XDP_PASS, XDP_TX) - name: redirect doc: The netdev supports XDP_REDIRECT - name: ndo-xmit doc: This feature informs if netdev implements ndo_xdp_xmit callback. - name: xsk-zerocopy doc: This feature informs if netdev supports AF_XDP in zero copy mode. - name: hw-offload doc: This feature informs if netdev supports XDP hw offloading. - name: rx-sg doc: This feature informs if netdev implements non-linear XDP buffer support in the driver napi callback. - name: ndo-xmit-sg doc: This feature informs if netdev implements non-linear XDP buffer support in ndo_xdp_xmit callback. - type: flags name: xdp-rx-metadata entries: - name: timestamp doc: Device is capable of exposing receive HW timestamp via bpf_xdp_metadata_rx_timestamp(). - name: hash doc: Device is capable of exposing receive packet hash via bpf_xdp_metadata_rx_hash(). - name: vlan-tag doc: Device is capable of exposing receive packet VLAN tag via bpf_xdp_metadata_rx_vlan_tag(). - type: flags name: xsk-flags entries: - name: tx-timestamp doc: HW timestamping egress packets is supported by the driver. - name: tx-checksum doc: L3 checksum HW offload is supported by the driver. - name: queue-type type: enum entries: [ rx, tx ] - name: qstats-scope type: flags entries: [ queue ] attribute-sets: - name: dev attributes: - name: ifindex doc: netdev ifindex type: u32 checks: min: 1 - name: pad type: pad - name: xdp-features doc: Bitmask of enabled xdp-features. type: u64 enum: xdp-act - name: xdp-zc-max-segs doc: max fragment count supported by ZC driver type: u32 checks: min: 1 - name: xdp-rx-metadata-features doc: Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details. type: u64 enum: xdp-rx-metadata - name: xsk-features doc: Bitmask of enabled AF_XDP features. type: u64 enum: xsk-flags - name: page-pool attributes: - name: id doc: Unique ID of a Page Pool instance. type: uint checks: min: 1 max: u32-max - name: ifindex doc: | ifindex of the netdev to which the pool belongs. May be reported as 0 if the page pool was allocated for a netdev which got destroyed already (page pools may outlast their netdevs because they wait for all memory to be returned). type: u32 checks: min: 1 max: s32-max - name: napi-id doc: Id of NAPI using this Page Pool instance. type: uint checks: min: 1 max: u32-max - name: inflight type: uint doc: | Number of outstanding references to this page pool (allocated but yet to be freed pages). Allocated pages may be held in socket receive queues, driver receive ring, page pool recycling ring, the page pool cache, etc. - name: inflight-mem type: uint doc: | Amount of memory held by inflight pages. - name: detach-time type: uint doc: | Seconds in CLOCK_BOOTTIME of when Page Pool was detached by the driver. Once detached Page Pool can no longer be used to allocate memory. Page Pools wait for all the memory allocated from them to be freed before truly disappearing. "Detached" Page Pools cannot be "re-attached", they are just waiting to disappear. Attribute is absent if Page Pool has not been detached, and can still be used to allocate new memory. - name: page-pool-info subset-of: page-pool attributes: - name: id - name: ifindex - name: page-pool-stats doc: | Page pool statistics, see docs for struct page_pool_stats for information about individual statistics. attributes: - name: info doc: Page pool identifying information. type: nest nested-attributes: page-pool-info - name: alloc-fast type: uint value: 8 # reserve some attr ids in case we need more metadata later - name: alloc-slow type: uint - name: alloc-slow-high-order type: uint - name: alloc-empty type: uint - name: alloc-refill type: uint - name: alloc-waive type: uint - name: recycle-cached type: uint - name: recycle-cache-full type: uint - name: recycle-ring type: uint - name: recycle-ring-full type: uint - name: recycle-released-refcnt type: uint - name: napi attributes: - name: ifindex doc: ifindex of the netdevice to which NAPI instance belongs. type: u32 checks: min: 1 - name: id doc: ID of the NAPI instance. type: u32 - name: irq doc: The associated interrupt vector number for the napi type: u32 - name: pid doc: PID of the napi thread, if NAPI is configured to operate in threaded mode. If NAPI is not in threaded mode (i.e. uses normal softirq context), the attribute will be absent. type: u32 - name: queue attributes: - name: id doc: Queue index; most queue types are indexed like a C array, with indexes starting at 0 and ending at queue count - 1. Queue indexes are scoped to an interface and queue type. type: u32 - name: ifindex doc: ifindex of the netdevice to which the queue belongs. type: u32 checks: min: 1 - name: type doc: Queue type as rx, tx. Each queue type defines a separate ID space. type: u32 enum: queue-type - name: napi-id doc: ID of the NAPI instance which services this queue. type: u32 - name: qstats doc: | Get device statistics, scoped to a device or a queue. These statistics extend (and partially duplicate) statistics available in struct rtnl_link_stats64. Value of the `scope` attribute determines how statistics are aggregated. When aggregated for the entire device the statistics represent the total number of events since last explicit reset of the device (i.e. not a reconfiguration like changing queue count). When reported per-queue, however, the statistics may not add up to the total number of events, will only be reported for currently active objects, and will likely report the number of events since last reconfiguration. attributes: - name: ifindex doc: ifindex of the netdevice to which stats belong. type: u32 checks: min: 1 - name: queue-type doc: Queue type as rx, tx, for queue-id. type: u32 enum: queue-type - name: queue-id doc: Queue ID, if stats are scoped to a single queue instance. type: u32 - name: scope doc: | What object type should be used to iterate over the stats. type: uint enum: qstats-scope - name: rx-packets doc: | Number of wire packets successfully received and passed to the stack. For drivers supporting XDP, XDP is considered the first layer of the stack, so packets consumed by XDP are still counted here. type: uint value: 8 # reserve some attr ids in case we need more metadata later - name: rx-bytes doc: Successfully received bytes, see `rx-packets`. type: uint - name: tx-packets doc: | Number of wire packets successfully sent. Packet is considered to be successfully sent once it is in device memory (usually this means the device has issued a DMA completion for the packet). type: uint - name: tx-bytes doc: Successfully sent bytes, see `tx-packets`. type: uint - name: rx-alloc-fail doc: | Number of times skb or buffer allocation failed on the Rx datapath. Allocation failure may, or may not result in a packet drop, depending on driver implementation and whether system recovers quickly. type: uint - name: rx-hw-drops doc: | Number of all packets which entered the device, but never left it, including but not limited to: packets dropped due to lack of buffer space, processing errors, explicit or implicit policies and packet filters. type: uint - name: rx-hw-drop-overruns doc: | Number of packets dropped due to transient lack of resources, such as buffer space, host descriptors etc. type: uint - name: rx-csum-unnecessary doc: Number of packets that were marked as CHECKSUM_UNNECESSARY. type: uint - name: rx-csum-none doc: Number of packets that were not checksummed by device. type: uint - name: rx-csum-bad doc: | Number of packets with bad checksum. The packets are not discarded, but still delivered to the stack. type: uint - name: rx-hw-gro-packets doc: | Number of packets that were coalesced from smaller packets by the device. Counts only packets coalesced with the HW-GRO netdevice feature, LRO-coalesced packets are not counted. type: uint - name: rx-hw-gro-bytes doc: See `rx-hw-gro-packets`. type: uint - name: rx-hw-gro-wire-packets doc: | Number of packets that were coalesced to bigger packetss with the HW-GRO netdevice feature. LRO-coalesced packets are not counted. type: uint - name: rx-hw-gro-wire-bytes doc: See `rx-hw-gro-wire-packets`. type: uint - name: rx-hw-drop-ratelimits doc: | Number of the packets dropped by the device due to the received packets bitrate exceeding the device rate limit. type: uint - name: tx-hw-drops doc: | Number of packets that arrived at the device but never left it, encompassing packets dropped for reasons such as processing errors, as well as those affected by explicitly defined policies and packet filtering criteria. type: uint - name: tx-hw-drop-errors doc: Number of packets dropped because they were invalid or malformed. type: uint - name: tx-csum-none doc: | Number of packets that did not require the device to calculate the checksum. type: uint - name: tx-needs-csum doc: | Number of packets that required the device to calculate the checksum. type: uint - name: tx-hw-gso-packets doc: | Number of packets that necessitated segmentation into smaller packets by the device. type: uint - name: tx-hw-gso-bytes doc: See `tx-hw-gso-packets`. type: uint - name: tx-hw-gso-wire-packets doc: | Number of wire-sized packets generated by processing `tx-hw-gso-packets` type: uint - name: tx-hw-gso-wire-bytes doc: See `tx-hw-gso-wire-packets`. type: uint - name: tx-hw-drop-ratelimits doc: | Number of the packets dropped by the device due to the transmit packets bitrate exceeding the device rate limit. type: uint - name: tx-stop doc: | Number of times driver paused accepting new tx packets from the stack to this queue, because the queue was full. Note that if BQL is supported and enabled on the device the networking stack will avoid queuing a lot of data at once. type: uint - name: tx-wake doc: | Number of times driver re-started accepting send requests to this queue from the stack. type: uint operations: list: - name: dev-get doc: Get / dump information about a netdev. attribute-set: dev do: request: attributes: - ifindex reply: &dev-all attributes: - ifindex - xdp-features - xdp-zc-max-segs - xdp-rx-metadata-features - xsk-features dump: reply: *dev-all - name: dev-add-ntf doc: Notification about device appearing. notify: dev-get mcgrp: mgmt - name: dev-del-ntf doc: Notification about device disappearing. notify: dev-get mcgrp: mgmt - name: dev-change-ntf doc: Notification about device configuration being changed. notify: dev-get mcgrp: mgmt - name: page-pool-get doc: | Get / dump information about Page Pools. (Only Page Pools associated with a net_device can be listed.) attribute-set: page-pool do: request: attributes: - id reply: &pp-reply attributes: - id - ifindex - napi-id - inflight - inflight-mem - detach-time dump: reply: *pp-reply config-cond: page-pool - name: page-pool-add-ntf doc: Notification about page pool appearing. notify: page-pool-get mcgrp: page-pool config-cond: page-pool - name: page-pool-del-ntf doc: Notification about page pool disappearing. notify: page-pool-get mcgrp: page-pool config-cond: page-pool - name: page-pool-change-ntf doc: Notification about page pool configuration being changed. notify: page-pool-get mcgrp: page-pool config-cond: page-pool - name: page-pool-stats-get doc: Get page pool statistics. attribute-set: page-pool-stats do: request: attributes: - info reply: &pp-stats-reply attributes: - info - alloc-fast - alloc-slow - alloc-slow-high-order - alloc-empty - alloc-refill - alloc-waive - recycle-cached - recycle-cache-full - recycle-ring - recycle-ring-full - recycle-released-refcnt dump: reply: *pp-stats-reply config-cond: page-pool-stats - name: queue-get doc: Get queue information from the kernel. Only configured queues will be reported (as opposed to all available hardware queues). attribute-set: queue do: request: attributes: - ifindex - type - id reply: &queue-get-op attributes: - id - type - napi-id - ifindex dump: request: attributes: - ifindex reply: *queue-get-op - name: napi-get doc: Get information about NAPI instances configured on the system. attribute-set: napi do: request: attributes: - id reply: &napi-get-op attributes: - id - ifindex - irq - pid dump: request: attributes: - ifindex reply: *napi-get-op - name: qstats-get doc: | Get / dump fine grained statistics. Which statistics are reported depends on the device and the driver, and whether the driver stores software counters per-queue. attribute-set: qstats dump: request: attributes: - ifindex - scope reply: attributes: - ifindex - queue-type - queue-id - rx-packets - rx-bytes - tx-packets - tx-bytes mcast-groups: list: - name: mgmt - name: page-pool