# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Socionext UniPhier thermal monitor

description: |
  This describes the devicetree bindings for thermal monitor supported by
  PVT(Process, Voltage and Temperature) monitoring unit implemented on
  Socionext UniPhier SoCs.

maintainers:
  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

$ref: thermal-sensor.yaml#

properties:
  compatible:
    enum:
      - socionext,uniphier-pxs2-thermal
      - socionext,uniphier-ld20-thermal
      - socionext,uniphier-pxs3-thermal
      - socionext,uniphier-nx1-thermal

  interrupts:
    maxItems: 1

  "#thermal-sensor-cells":
    const: 0

  socionext,tmod-calibration:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    maxItems: 2
    description:
      A pair of calibrated values referred from PVT, in case that the values
      aren't set on SoC, like a reference board.

required:
  - compatible
  - interrupts

unevaluatedProperties: false

examples:
  - |
    // The UniPhier thermal should be a subnode of a "syscon" compatible node.

    #include <dt-bindings/interrupt-controller/arm-gic.h>
    pvtctl: thermal-sensor {
        compatible = "socionext,uniphier-ld20-thermal";
        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
        #thermal-sensor-cells = <0>;
    };