From 36e075ce74ec4e261a638bf09d10b3348ca4d883 Mon Sep 17 00:00:00 2001 From: Jenny TC Date: Sat, 23 Mar 2019 18:40:10 +0530 Subject: ASoC: Intel: Skylake: enable S24_LE format support To enable S24_LE format, sample_type in topology fw has to be set to 1. But sample_type defined in topology firmware configuration is not getting reflected in the dsp param. This patch sets sample_type in base config so that the sample type defined in the topology firmware is reflected in the dsp params. This issues was uncovered while debugging the S24_LE format which require the MSB byte in 32 bit word to be skipped. Setting sample_type in topology firmware to 1 helps to skip MSB byte word. Signed-off-by: Jenny TC Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 1 + 1 file changed, 1 insertion(+) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index 28c4806b196a..4bf70b4429f0 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -483,6 +483,7 @@ static void skl_set_base_module_format(struct skl_sst *ctx, base_cfg->audio_fmt.bit_depth = format->bit_depth; base_cfg->audio_fmt.valid_bit_depth = format->valid_bit_depth; base_cfg->audio_fmt.ch_cfg = format->ch_cfg; + base_cfg->audio_fmt.sample_type = format->sample_type; dev_dbg(ctx->dev, "bit_depth=%x valid_bd=%x ch_config=%x\n", format->bit_depth, format->valid_bit_depth, -- cgit v1.2.3-58-ga151