From 9fc88ad6fd86ff6ce979105c633c58cc3980129c Mon Sep 17 00:00:00 2001 From: Eric Wong <normalperson@yhbt.net> Date: Tue, 31 Mar 2015 07:34:05 +0000 Subject: ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate Adding this quirk allows us to avoid the noisy "cannot get freq at ep 0x1" message in dmesg output every time playback starts. This ought to affect other Benchmark DAC1 variations using the same "Microchip Technology, Inc." chip as well, but I have only tested with the "Pre" variant. Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Joe Turner <joe@oampo.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> --- sound/usb/quirks.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'sound/usb/quirks.c') diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 753a47de8459..9a28365126f9 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1113,8 +1113,13 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs, bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) { - /* MS Lifecam HD-5000 doesn't support reading the sample rate. */ - return chip->usb_id == USB_ID(0x045E, 0x076D); + /* devices which do not support reading the sample rate. */ + switch (chip->usb_id) { + case USB_ID(0x045E, 0x076D): /* MS Lifecam HD-5000 */ + case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ + return true; + } + return false; } /* Marantz/Denon USB DACs need a vendor cmd to switch -- cgit v1.2.3-58-ga151