From d0ba4c014934cb56f1eabb481ff8026b6d49d33c Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 20 Jul 2012 17:20:25 +0800 Subject: ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work Set an initial clock rate for the saif internal logic to work properly. This is important when working in EXTMASTER mode that uses the other saif's BITCLK&LRCLK but it still needs a basic clock which should be fast enough for the internal logic. Signed-off-by: Dong Aisheng Acked-by: Shawn Guo Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-saif.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'sound/soc/mxs') diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index fdbb36aa9cf5..b3030718c228 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -427,8 +427,22 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream, /* prepare clk in hw_param, enable in trigger */ clk_prepare(saif->clk); - if (saif != master_saif) + if (saif != master_saif) { + /* + * Set an initial clock rate for the saif internal logic to work + * properly. This is important when working in EXTMASTER mode + * that uses the other saif's BITCLK&LRCLK but it still needs a + * basic clock which should be fast enough for the internal + * logic. + */ + clk_enable(saif->clk); + ret = clk_set_rate(saif->clk, 24000000); + clk_disable(saif->clk); + if (ret) + return ret; + clk_prepare(master_saif->clk); + } scr = __raw_readl(saif->base + SAIF_CTRL); -- cgit v1.2.3-58-ga151