From 1d211d43167690f94f1bcadf44395799382d85d0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 May 2018 14:53:41 +0200 Subject: cfg80211: use better order for kcalloc() arguments The arguments should be (# of elements, size of each) instead of the other way around, which really ends up being mostly equivalent but smatch complains about it, so swap them. Signed-off-by: Johannes Berg Signed-off-by: Johannes Berg --- net/wireless/util.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/util.c b/net/wireless/util.c index b5bb1c309914..b91597a8baa2 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1789,8 +1789,9 @@ bool cfg80211_does_bw_fit_range(const struct ieee80211_freq_range *freq_range, int cfg80211_sinfo_alloc_tid_stats(struct station_info *sinfo, gfp_t gfp) { - sinfo->pertid = kcalloc(sizeof(*(sinfo->pertid)), - IEEE80211_NUM_TIDS + 1, gfp); + sinfo->pertid = kcalloc(IEEE80211_NUM_TIDS + 1, + sizeof(*(sinfo->pertid)), + gfp); if (!sinfo->pertid) return -ENOMEM; -- cgit v1.2.3-58-ga151 From db0a4ad80d3aee6f6e96eddc7ef6a88f4e38d357 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 28 May 2018 15:47:37 +0200 Subject: nl80211: refactor common code in scan flags checks There's a very common pattern to check for a scan flag and then reject it if an extended feature flag isn't set, factor this out into a helper function. Signed-off-by: Johannes Berg Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 60 ++++++++++++++++++++++++++------------------------ 1 file changed, 31 insertions(+), 29 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 07514ca011b2..6c3ded1223fb 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6861,6 +6861,16 @@ static bool cfg80211_off_channel_oper_allowed(struct wireless_dev *wdev) return regulatory_pre_cac_allowed(wdev->wiphy); } +static bool nl80211_check_scan_feat(struct wiphy *wiphy, u32 flags, u32 flag, + enum nl80211_ext_feature_index feat) +{ + if (!(flags & flag)) + return true; + if (wiphy_ext_feature_isset(wiphy, feat)) + return true; + return false; +} + static int nl80211_check_scan_flags(struct wiphy *wiphy, struct wireless_dev *wdev, void *request, struct nlattr **attrs, @@ -6895,15 +6905,27 @@ nl80211_check_scan_flags(struct wiphy *wiphy, struct wireless_dev *wdev, if (((*flags & NL80211_SCAN_FLAG_LOW_PRIORITY) && !(wiphy->features & NL80211_FEATURE_LOW_PRIORITY_SCAN)) || - ((*flags & NL80211_SCAN_FLAG_LOW_SPAN) && - !wiphy_ext_feature_isset(wiphy, - NL80211_EXT_FEATURE_LOW_SPAN_SCAN)) || - ((*flags & NL80211_SCAN_FLAG_LOW_POWER) && - !wiphy_ext_feature_isset(wiphy, - NL80211_EXT_FEATURE_LOW_POWER_SCAN)) || - ((*flags & NL80211_SCAN_FLAG_HIGH_ACCURACY) && - !wiphy_ext_feature_isset(wiphy, - NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN))) + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_LOW_SPAN, + NL80211_EXT_FEATURE_LOW_SPAN_SCAN) || + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_LOW_POWER, + NL80211_EXT_FEATURE_LOW_POWER_SCAN) || + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_HIGH_ACCURACY, + NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN) || + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME, + NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME) || + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP, + NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP) || + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION) || + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE)) return -EOPNOTSUPP; if (*flags & NL80211_SCAN_FLAG_RANDOM_ADDR) { @@ -6918,26 +6940,6 @@ nl80211_check_scan_flags(struct wiphy *wiphy, struct wireless_dev *wdev, return err; } - if ((*flags & NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME) && - !wiphy_ext_feature_isset(wiphy, - NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME)) - return -EOPNOTSUPP; - - if ((*flags & NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP) && - !wiphy_ext_feature_isset(wiphy, - NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP)) - return -EOPNOTSUPP; - - if ((*flags & NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION) && - !wiphy_ext_feature_isset(wiphy, - NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION)) - return -EOPNOTSUPP; - - if ((*flags & NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE) && - !wiphy_ext_feature_isset(wiphy, - NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE)) - return -EOPNOTSUPP; - return 0; } -- cgit v1.2.3-58-ga151 From 2e076f199097d670ce5e5492cea57f552b93bba9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 28 May 2018 15:47:40 +0200 Subject: nl80211: add scan features for improved scan privacy Add the scan flags for randomized SN and minimized probe request content for improved scan privacy. Signed-off-by: Johannes Berg Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 15 +++++++++++++++ net/wireless/nl80211.c | 8 +++++++- 2 files changed, 22 insertions(+), 1 deletion(-) (limited to 'net/wireless') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 28b36545de24..49f718e821a3 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -5133,6 +5133,11 @@ enum nl80211_feature_flags { * support to nl80211. * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate * TXQs. + * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the + * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. + * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data + * except for supported rates from the probe request content if requested + * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -5167,6 +5172,8 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT, NL80211_EXT_FEATURE_TXQS, + NL80211_EXT_FEATURE_SCAN_RANDOM_SN, + NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -5272,6 +5279,12 @@ enum nl80211_timeout_reason { * possible scan results. This flag hints the driver to use the best * possible scan configuration to improve the accuracy in scanning. * Latency and power use may get impacted with this flag. + * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe + * request frames from this scan to avoid correlation/tracking being + * possible. + * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to + * only have supported rates and no additional capabilities (unless + * added by userspace explicitly.) */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -5285,6 +5298,8 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, NL80211_SCAN_FLAG_LOW_POWER = 1<<9, NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, + NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, }; /** diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 6c3ded1223fb..d2677259e13e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6925,7 +6925,13 @@ nl80211_check_scan_flags(struct wiphy *wiphy, struct wireless_dev *wdev, NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION) || !nl80211_check_scan_feat(wiphy, *flags, NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE, - NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE)) + NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE) || + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_RANDOM_SN, + NL80211_EXT_FEATURE_SCAN_RANDOM_SN) || + !nl80211_check_scan_feat(wiphy, *flags, + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT, + NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT)) return -EOPNOTSUPP; if (*flags & NL80211_SCAN_FLAG_RANDOM_ADDR) { -- cgit v1.2.3-58-ga151 From 446faa15c6e80620826edd659e63c6760137975a Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 14 Jun 2018 09:43:06 +0800 Subject: nl80211: report 4ADDR status with GET_INTERFACE User space tools might be interested in knowing the current status of the 4ADDR property of an interface (when supported). Send the status along with the other attributes when replying to a GET_INTERFACE netlink query. Signed-off-by: Antonio Quartulli Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net/wireless') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d2677259e13e..7b21914ae18b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2757,7 +2757,8 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flag nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, wdev_address(wdev)) || nla_put_u32(msg, NL80211_ATTR_GENERATION, rdev->devlist_generation ^ - (cfg80211_rdev_list_generation << 2))) + (cfg80211_rdev_list_generation << 2)) || + nla_put_u8(msg, NL80211_ATTR_4ADDR, wdev->use_4addr)) goto nla_put_failure; if (rdev->ops->get_channel) { -- cgit v1.2.3-58-ga151 From c4cbaf7973a794839af080f13748335976cf3f3f Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Sat, 9 Jun 2018 09:14:42 +0300 Subject: cfg80211: Add support for HE Add support for the HE in cfg80211 and also add userspace API to nl80211 to send rate information out, conforming with P802.11ax_D2.0. Signed-off-by: Liad Kaufman Signed-off-by: Johannes Berg Signed-off-by: Ilan Peer Signed-off-by: Ido Yariv Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 427 +++++++++++++++++++++++++++++++++++++++++++ include/net/cfg80211.h | 106 ++++++++++- include/uapi/linux/nl80211.h | 87 ++++++++- net/wireless/core.c | 21 ++- net/wireless/nl80211.c | 99 +++++++++- net/wireless/util.c | 82 +++++++++ 6 files changed, 817 insertions(+), 5 deletions(-) (limited to 'net/wireless') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 8fe7e4306816..e6a6503bfa33 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1539,6 +1539,106 @@ struct ieee80211_vht_operation { __le16 basic_mcs_set; } __packed; +/** + * struct ieee80211_he_cap_elem - HE capabilities element + * + * This structure is the "HE capabilities element" fixed fields as + * described in P802.11ax_D2.0 section 9.4.2.237.2 and 9.4.2.237.3 + */ +struct ieee80211_he_cap_elem { + u8 mac_cap_info[5]; + u8 phy_cap_info[9]; +} __packed; + +#define IEEE80211_TX_RX_MCS_NSS_DESC_MAX_LEN 5 + +/** + * enum ieee80211_he_mcs_support - HE MCS support definitions + * @IEEE80211_HE_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_HE_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_HE_MCS_SUPPORT_0_11: MCSes 0-11 are supported + * @IEEE80211_HE_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the rx_mcs_* + * and tx_mcs_* fields of &struct ieee80211_he_mcs_nss_supp, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_he_mcs_support { + IEEE80211_HE_MCS_SUPPORT_0_7 = 0, + IEEE80211_HE_MCS_SUPPORT_0_9 = 1, + IEEE80211_HE_MCS_SUPPORT_0_11 = 2, + IEEE80211_HE_MCS_NOT_SUPPORTED = 3, +}; + +/** + * struct ieee80211_he_mcs_nss_supp - HE Tx/Rx HE MCS NSS Support Field + * + * This structure holds the data required for the Tx/Rx HE MCS NSS Support Field + * described in P802.11ax_D2.0 section 9.4.2.237.4 + * + * @rx_mcs_80: Rx MCS map 2 bits for each stream, total 8 streams, for channel + * widths less than 80MHz. + * @tx_mcs_80: Tx MCS map 2 bits for each stream, total 8 streams, for channel + * widths less than 80MHz. + * @rx_mcs_160: Rx MCS map 2 bits for each stream, total 8 streams, for channel + * width 160MHz. + * @tx_mcs_160: Tx MCS map 2 bits for each stream, total 8 streams, for channel + * width 160MHz. + * @rx_mcs_80p80: Rx MCS map 2 bits for each stream, total 8 streams, for + * channel width 80p80MHz. + * @tx_mcs_80p80: Tx MCS map 2 bits for each stream, total 8 streams, for + * channel width 80p80MHz. + */ +struct ieee80211_he_mcs_nss_supp { + __le16 rx_mcs_80; + __le16 tx_mcs_80; + __le16 rx_mcs_160; + __le16 tx_mcs_160; + __le16 rx_mcs_80p80; + __le16 tx_mcs_80p80; +} __packed; + +/** + * struct ieee80211_he_operation - HE capabilities element + * + * This structure is the "HE operation element" fields as + * described in P802.11ax_D2.0 section 9.4.2.238 + */ +struct ieee80211_he_operation { + __le32 he_oper_params; + __le16 he_mcs_nss_set; + /* Optional 0,1,3 or 4 bytes: depends on @he_oper_params */ + u8 optional[0]; +} __packed; + +/** + * struct ieee80211_he_mu_edca_param_ac_rec - MU AC Parameter Record field + * + * This structure is the "MU AC Parameter Record" fields as + * described in P802.11ax_D2.0 section 9.4.2.240 + */ +struct ieee80211_he_mu_edca_param_ac_rec { + u8 aifsn; + u8 ecw_min_max; + u8 mu_edca_timer; +} __packed; + +/** + * struct ieee80211_mu_edca_param_set - MU EDCA Parameter Set element + * + * This structure is the "MU EDCA Parameter Set element" fields as + * described in P802.11ax_D2.0 section 9.4.2.240 + */ +struct ieee80211_mu_edca_param_set { + u8 mu_qos_info; + struct ieee80211_he_mu_edca_param_ac_rec ac_be; + struct ieee80211_he_mu_edca_param_ac_rec ac_bk; + struct ieee80211_he_mu_edca_param_ac_rec ac_vi; + struct ieee80211_he_mu_edca_param_ac_rec ac_vo; +} __packed; /* 802.11ac VHT Capabilities */ #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 @@ -1577,6 +1677,328 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 #define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 +/* 802.11ax HE MAC capabilities */ +#define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01 +#define IEEE80211_HE_MAC_CAP0_TWT_REQ 0x02 +#define IEEE80211_HE_MAC_CAP0_TWT_RES 0x04 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_NOT_SUPP 0x00 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_1 0x08 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_2 0x10 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_3 0x18 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_MASK 0x18 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_1 0x00 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_2 0x20 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_4 0x40 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_8 0x60 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_16 0x80 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_32 0xa0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_64 0xc0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_UNLIMITED 0xe0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_MASK 0xe0 + +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_UNLIMITED 0x00 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_128 0x01 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_256 0x02 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_512 0x03 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_MASK 0x03 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_0US 0x00 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_8US 0x04 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US 0x08 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK 0x0c +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_1 0x00 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_2 0x10 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_3 0x20 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_4 0x30 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_5 0x40 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_6 0x50 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_7 0x60 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_8 0x70 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_MASK 0x70 + +/* Link adaptation is split between byte HE_MAC_CAP1 and + * HE_MAC_CAP2. It should be set only if IEEE80211_HE_MAC_CAP0_HTC_HE + * in which case the following values apply: + * 0 = No feedback. + * 1 = reserved. + * 2 = Unsolicited feedback. + * 3 = both + */ +#define IEEE80211_HE_MAC_CAP1_LINK_ADAPTATION 0x80 + +#define IEEE80211_HE_MAC_CAP2_LINK_ADAPTATION 0x01 +#define IEEE80211_HE_MAC_CAP2_ALL_ACK 0x02 +#define IEEE80211_HE_MAC_CAP2_UL_MU_RESP_SCHED 0x04 +#define IEEE80211_HE_MAC_CAP2_BSR 0x08 +#define IEEE80211_HE_MAC_CAP2_BCAST_TWT 0x10 +#define IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP 0x20 +#define IEEE80211_HE_MAC_CAP2_MU_CASCADING 0x40 +#define IEEE80211_HE_MAC_CAP2_ACK_EN 0x80 + +#define IEEE80211_HE_MAC_CAP3_GRP_ADDR_MULTI_STA_BA_DL_MU 0x01 +#define IEEE80211_HE_MAC_CAP3_OMI_CONTROL 0x02 +#define IEEE80211_HE_MAC_CAP3_OFDMA_RA 0x04 + +/* The maximum length of an A-MDPU is defined by the combination of the Maximum + * A-MDPU Length Exponent field in the HT capabilities, VHT capabilities and the + * same field in the HE capabilities. + */ +#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_USE_VHT 0x00 +#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_VHT_1 0x08 +#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_VHT_2 0x10 +#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_RESERVED 0x18 +#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_MASK 0x18 +#define IEEE80211_HE_MAC_CAP3_A_AMSDU_FRAG 0x20 +#define IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED 0x40 +#define IEEE80211_HE_MAC_CAP3_RX_CTRL_FRAME_TO_MULTIBSS 0x80 + +#define IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG 0x01 +#define IEEE80211_HE_MAC_CAP4_QTP 0x02 +#define IEEE80211_HE_MAC_CAP4_BQR 0x04 +#define IEEE80211_HE_MAC_CAP4_SR_RESP 0x08 +#define IEEE80211_HE_MAC_CAP4_NDP_FB_REP 0x10 +#define IEEE80211_HE_MAC_CAP4_OPS 0x20 +#define IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU 0x40 + +/* 802.11ax HE PHY capabilities */ +#define IEEE80211_HE_PHY_CAP0_DUAL_BAND 0x01 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G 0x02 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G 0x04 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G 0x08 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G 0x10 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G 0x20 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G 0x40 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK 0xfe + +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ 0x01 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ 0x02 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ 0x04 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ 0x08 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK 0x0f +#define IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A 0x10 +#define IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD 0x20 +#define IEEE80211_HE_PHY_CAP1_HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US 0x40 +/* Midamble RX Max NSTS is split between byte #2 and byte #3 */ +#define IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_MAX_NSTS 0x80 + +#define IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_MAX_NSTS 0x01 +#define IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US 0x02 +#define IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ 0x04 +#define IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ 0x08 +#define IEEE80211_HE_PHY_CAP2_DOPPLER_TX 0x10 +#define IEEE80211_HE_PHY_CAP2_DOPPLER_RX 0x20 + +/* Note that the meaning of UL MU below is different between an AP and a non-AP + * sta, where in the AP case it indicates support for Rx and in the non-AP sta + * case it indicates support for Tx. + */ +#define IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO 0x40 +#define IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO 0x80 + +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK 0x01 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK 0x02 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM 0x03 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK 0x03 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_1 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_2 0x04 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK 0x08 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK 0x10 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM 0x18 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK 0x18 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_1 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_2 0x20 +#define IEEE80211_HE_PHY_CAP3_RX_HE_MU_PPDU_FROM_NON_AP_STA 0x40 +#define IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER 0x80 + +#define IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE 0x01 +#define IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER 0x02 + +/* Minimal allowed value of Max STS under 80MHz is 3 */ +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 0x0c +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5 0x10 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_6 0x14 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_7 0x18 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8 0x1c +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK 0x1c + +/* Minimal allowed value of Max STS above 80MHz is 3 */ +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 0x60 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5 0x80 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_6 0xa0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_7 0xc0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8 0xe0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK 0xe0 + +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_1 0x00 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 0x01 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_3 0x02 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_4 0x03 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_5 0x04 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_6 0x05 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_7 0x06 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_8 0x07 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK 0x07 + +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_1 0x00 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2 0x08 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_3 0x10 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_4 0x18 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_5 0x20 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_6 0x28 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_7 0x30 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_8 0x38 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK 0x38 + +#define IEEE80211_HE_PHY_CAP5_NG16_SU_FEEDBACK 0x40 +#define IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK 0x80 + +#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_42_SU 0x01 +#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU 0x02 +#define IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMER_FB 0x04 +#define IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB 0x08 +#define IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB 0x10 +#define IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE 0x20 +#define IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO 0x40 +#define IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT 0x80 + +#define IEEE80211_HE_PHY_CAP7_SRP_BASED_SR 0x01 +#define IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_AR 0x02 +#define IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI 0x04 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_1 0x08 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_2 0x10 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_3 0x18 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_4 0x20 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_5 0x28 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_6 0x30 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_7 0x38 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_MASK 0x38 +#define IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ 0x40 +#define IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ 0x80 + +#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI 0x01 +#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G 0x02 +#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU 0x04 +#define IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU 0x08 +#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_1XLTF_AND_08_US_GI 0x10 +#define IEEE80211_HE_PHY_CAP8_MIDAMBLE_RX_2X_AND_1XLTF 0x20 + +/* 802.11ax HE TX/RX MCS NSS Support */ +#define IEEE80211_TX_RX_MCS_NSS_SUPP_HIGHEST_MCS_POS (3) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_POS (6) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_POS (11) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_MASK 0x07c0 +#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_MASK 0xf800 + +/* TX/RX HE MCS Support field Highest MCS subfield encoding */ +enum ieee80211_he_highest_mcs_supported_subfield_enc { + HIGHEST_MCS_SUPPORTED_MCS7 = 0, + HIGHEST_MCS_SUPPORTED_MCS8, + HIGHEST_MCS_SUPPORTED_MCS9, + HIGHEST_MCS_SUPPORTED_MCS10, + HIGHEST_MCS_SUPPORTED_MCS11, +}; + +/* Calculate 802.11ax HE capabilities IE Tx/Rx HE MCS NSS Support Field size */ +static inline u8 +ieee80211_he_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap) +{ + u8 count = 4; + + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G) + count += 4; + + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G) + count += 4; + + return count; +} + +/* 802.11ax HE PPE Thresholds */ +#define IEEE80211_PPE_THRES_NSS_SUPPORT_2NSS (1) +#define IEEE80211_PPE_THRES_NSS_POS (0) +#define IEEE80211_PPE_THRES_NSS_MASK (7) +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_2x966_AND_966_RU \ + (BIT(5) | BIT(6)) +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK 0x78 +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_POS (3) +#define IEEE80211_PPE_THRES_INFO_PPET_SIZE (3) + +/* + * Calculate 802.11ax HE capabilities IE PPE field size + * Input: Header byte of ppe_thres (first byte), and HE capa IE's PHY cap u8* + */ +static inline u8 +ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info) +{ + u8 n; + + if ((phy_cap_info[6] & + IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) == 0) + return 0; + + n = hweight8(ppe_thres_hdr & + IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK); + n *= (1 + ((ppe_thres_hdr & IEEE80211_PPE_THRES_NSS_MASK) >> + IEEE80211_PPE_THRES_NSS_POS)); + + /* + * Each pair is 6 bits, and we need to add the 7 "header" bits to the + * total size. + */ + n = (n * IEEE80211_PPE_THRES_INFO_PPET_SIZE * 2) + 7; + n = DIV_ROUND_UP(n, 8); + + return n; +} + +/* HE Operation defines */ +#define IEEE80211_HE_OPERATION_BSS_COLOR_MASK 0x0000003f +#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK 0x000001c0 +#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_OFFSET 6 +#define IEEE80211_HE_OPERATION_TWT_REQUIRED 0x00000200 +#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK 0x000ffc00 +#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET 10 +#define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR 0x000100000 +#define IEEE80211_HE_OPERATION_VHT_OPER_INFO 0x000200000 +#define IEEE80211_HE_OPERATION_MULTI_BSSID_AP 0x10000000 +#define IEEE80211_HE_OPERATION_TX_BSSID_INDICATOR 0x20000000 +#define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED 0x40000000 + +/* + * ieee80211_he_oper_size - calculate 802.11ax HE Operations IE size + * @he_oper_ie: byte data of the He Operations IE, stating from the the byte + * after the ext ID byte. It is assumed that he_oper_ie has at least + * sizeof(struct ieee80211_he_operation) bytes, checked already in + * ieee802_11_parse_elems_crc() + * @return the actual size of the IE data (not including header), or 0 on error + */ +static inline u8 +ieee80211_he_oper_size(const u8 *he_oper_ie) +{ + struct ieee80211_he_operation *he_oper = (void *)he_oper_ie; + u8 oper_len = sizeof(struct ieee80211_he_operation); + u32 he_oper_params; + + /* Make sure the input is not NULL */ + if (!he_oper_ie) + return 0; + + /* Calc required length */ + he_oper_params = le32_to_cpu(he_oper->he_oper_params); + if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO) + oper_len += 3; + if (he_oper_params & IEEE80211_HE_OPERATION_MULTI_BSSID_AP) + oper_len++; + + /* Add the first byte (extension ID) to the total length */ + oper_len++; + + return oper_len; +} + /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 @@ -1992,6 +2414,11 @@ enum ieee80211_eid_ext { WLAN_EID_EXT_FILS_WRAPPED_DATA = 8, WLAN_EID_EXT_FILS_PUBLIC_KEY = 12, WLAN_EID_EXT_FILS_NONCE = 13, + WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE = 14, + WLAN_EID_EXT_HE_CAPABILITY = 35, + WLAN_EID_EXT_HE_OPERATION = 36, + WLAN_EID_EXT_UORA = 37, + WLAN_EID_EXT_HE_MU_EDCA = 38, }; /* Action category code */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5fbfe61f41c6..9ba1f289c439 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -285,6 +285,41 @@ struct ieee80211_sta_vht_cap { struct ieee80211_vht_mcs_info vht_mcs; }; +#define IEEE80211_HE_PPE_THRES_MAX_LEN 25 + +/** + * struct ieee80211_sta_he_cap - STA's HE capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11ax HE capabilities for a STA. + * + * @has_he: true iff HE data is valid. + * @he_cap_elem: Fixed portion of the HE capabilities element. + * @he_mcs_nss_supp: The supported NSS/MCS combinations. + * @ppe_thres: Holds the PPE Thresholds data. + */ +struct ieee80211_sta_he_cap { + bool has_he; + struct ieee80211_he_cap_elem he_cap_elem; + struct ieee80211_he_mcs_nss_supp he_mcs_nss_supp; + u8 ppe_thres[IEEE80211_HE_PPE_THRES_MAX_LEN]; +}; + +/** + * struct ieee80211_sband_iftype_data + * + * This structure encapsulates sband data that is relevant for the + * interface types defined in @types_mask. Each type in the + * @types_mask must be unique across all instances of iftype_data. + * + * @types_mask: interface types mask + * @he_cap: holds the HE capabilities + */ +struct ieee80211_sband_iftype_data { + u16 types_mask; + struct ieee80211_sta_he_cap he_cap; +}; + /** * struct ieee80211_supported_band - frequency band definition * @@ -301,6 +336,11 @@ struct ieee80211_sta_vht_cap { * @n_bitrates: Number of bitrates in @bitrates * @ht_cap: HT capabilities in this band * @vht_cap: VHT capabilities in this band + * @n_iftype_data: number of iftype data entries + * @iftype_data: interface type data entries. Note that the bits in + * @types_mask inside this structure cannot overlap (i.e. only + * one occurrence of each type is allowed across all instances of + * iftype_data). */ struct ieee80211_supported_band { struct ieee80211_channel *channels; @@ -310,8 +350,55 @@ struct ieee80211_supported_band { int n_bitrates; struct ieee80211_sta_ht_cap ht_cap; struct ieee80211_sta_vht_cap vht_cap; + u16 n_iftype_data; + const struct ieee80211_sband_iftype_data *iftype_data; }; +/** + * ieee80211_get_sband_iftype_data - return sband data for a given iftype + * @sband: the sband to search for the STA on + * @iftype: enum nl80211_iftype + * + * Return: pointer to struct ieee80211_sband_iftype_data, or NULL is none found + */ +static inline const struct ieee80211_sband_iftype_data * +ieee80211_get_sband_iftype_data(const struct ieee80211_supported_band *sband, + u8 iftype) +{ + int i; + + if (WARN_ON(iftype >= NL80211_IFTYPE_MAX)) + return NULL; + + for (i = 0; i < sband->n_iftype_data; i++) { + const struct ieee80211_sband_iftype_data *data = + &sband->iftype_data[i]; + + if (data->types_mask & BIT(iftype)) + return data; + } + + return NULL; +} + +/** + * ieee80211_get_he_sta_cap - return HE capabilities for an sband's STA + * @sband: the sband to search for the STA on + * + * Return: pointer to the struct ieee80211_sta_he_cap, or NULL is none found + */ +static inline const struct ieee80211_sta_he_cap * +ieee80211_get_he_sta_cap(const struct ieee80211_supported_band *sband) +{ + const struct ieee80211_sband_iftype_data *data = + ieee80211_get_sband_iftype_data(sband, NL80211_IFTYPE_STATION); + + if (data && data->he_cap.has_he) + return &data->he_cap; + + return NULL; +} + /** * wiphy_read_of_freq_limits - read frequency limits from device tree * @@ -899,6 +986,8 @@ enum station_parameters_apply_mask { * @opmode_notif: operating mode field from Operating Mode Notification * @opmode_notif_used: information if operating mode field is used * @support_p2p_ps: information if station supports P2P PS mechanism + * @he_capa: HE capabilities of station + * @he_capa_len: the length of the HE capabilities */ struct station_parameters { const u8 *supported_rates; @@ -926,6 +1015,8 @@ struct station_parameters { u8 opmode_notif; bool opmode_notif_used; int support_p2p_ps; + const struct ieee80211_he_cap_elem *he_capa; + u8 he_capa_len; }; /** @@ -1000,12 +1091,14 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval * @RATE_INFO_FLAGS_60G: 60GHz MCS + * @RATE_INFO_FLAGS_HE_MCS: HE MCS information */ enum rate_info_flags { RATE_INFO_FLAGS_MCS = BIT(0), RATE_INFO_FLAGS_VHT_MCS = BIT(1), RATE_INFO_FLAGS_SHORT_GI = BIT(2), RATE_INFO_FLAGS_60G = BIT(3), + RATE_INFO_FLAGS_HE_MCS = BIT(4), }; /** @@ -1019,6 +1112,7 @@ enum rate_info_flags { * @RATE_INFO_BW_40: 40 MHz bandwidth * @RATE_INFO_BW_80: 80 MHz bandwidth * @RATE_INFO_BW_160: 160 MHz bandwidth + * @RATE_INFO_BW_HE_RU: bandwidth determined by HE RU allocation */ enum rate_info_bw { RATE_INFO_BW_20 = 0, @@ -1027,6 +1121,7 @@ enum rate_info_bw { RATE_INFO_BW_40, RATE_INFO_BW_80, RATE_INFO_BW_160, + RATE_INFO_BW_HE_RU, }; /** @@ -1035,10 +1130,14 @@ enum rate_info_bw { * Information about a receiving or transmitting bitrate * * @flags: bitflag of flags from &enum rate_info_flags - * @mcs: mcs index if struct describes a 802.11n bitrate + * @mcs: mcs index if struct describes an HT/VHT/HE rate * @legacy: bitrate in 100kbit/s for 802.11abg - * @nss: number of streams (VHT only) + * @nss: number of streams (VHT & HE only) * @bw: bandwidth (from &enum rate_info_bw) + * @he_gi: HE guard interval (from &enum nl80211_he_gi) + * @he_dcm: HE DCM value + * @he_ru_alloc: HE RU allocation (from &enum nl80211_he_ru_alloc, + * only valid if bw is %RATE_INFO_BW_HE_RU) */ struct rate_info { u8 flags; @@ -1046,6 +1145,9 @@ struct rate_info { u16 legacy; u8 nss; u8 bw; + u8 he_gi; + u8 he_dcm; + u8 he_ru_alloc; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 49f718e821a3..f82ce3c89ab7 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2237,6 +2237,9 @@ enum nl80211_commands { * enforced. * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes * a flow is assigned on each round of the DRR scheduler. + * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2677,6 +2680,8 @@ enum nl80211_attrs { NL80211_ATTR_TXQ_MEMORY_LIMIT, NL80211_ATTR_TXQ_QUANTUM, + NL80211_ATTR_HE_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2726,7 +2731,8 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 #define NL80211_VHT_CAPABILITY_LEN 12 - +#define NL80211_HE_MIN_CAPABILITY_LEN 16 +#define NL80211_HE_MAX_CAPABILITY_LEN 51 #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 @@ -2853,6 +2859,38 @@ struct nl80211_sta_flag_update { __u32 set; } __attribute__((packed)); +/** + * enum nl80211_he_gi - HE guard interval + * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec + */ +enum nl80211_he_gi { + NL80211_RATE_INFO_HE_GI_0_8, + NL80211_RATE_INFO_HE_GI_1_6, + NL80211_RATE_INFO_HE_GI_3_2, +}; + +/** + * enum nl80211_he_ru_alloc - HE RU allocation values + * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation + */ +enum nl80211_he_ru_alloc { + NL80211_RATE_INFO_HE_RU_ALLOC_26, + NL80211_RATE_INFO_HE_RU_ALLOC_52, + NL80211_RATE_INFO_HE_RU_ALLOC_106, + NL80211_RATE_INFO_HE_RU_ALLOC_242, + NL80211_RATE_INFO_HE_RU_ALLOC_484, + NL80211_RATE_INFO_HE_RU_ALLOC_996, + NL80211_RATE_INFO_HE_RU_ALLOC_2x996, +}; + /** * enum nl80211_rate_info - bitrate information * @@ -2885,6 +2923,13 @@ struct nl80211_sta_flag_update { * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is * a legacy rate and will be reported as the actual bitrate, i.e. * a quarter of the base (20 MHz) rate + * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) + * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) + * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier + * (u8, see &enum nl80211_he_gi) + * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) + * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then + * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -2901,6 +2946,11 @@ enum nl80211_rate_info { NL80211_RATE_INFO_160_MHZ_WIDTH, NL80211_RATE_INFO_10_MHZ_WIDTH, NL80211_RATE_INFO_5_MHZ_WIDTH, + NL80211_RATE_INFO_HE_MCS, + NL80211_RATE_INFO_HE_NSS, + NL80211_RATE_INFO_HE_GI, + NL80211_RATE_INFO_HE_DCM, + NL80211_RATE_INFO_HE_RU_ALLOC, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -3166,6 +3216,38 @@ enum nl80211_mpath_info { NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 }; +/** + * enum nl80211_band_iftype_attr - Interface type data attributes + * + * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute + * for each interface type that supports the band data + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as + * defined in HE capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently + * defined + * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_band_iftype_attr { + __NL80211_BAND_IFTYPE_ATTR_INVALID, + + NL80211_BAND_IFTYPE_ATTR_IFTYPES, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, + + /* keep last */ + __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, + NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 +}; + /** * enum nl80211_band_attr - band attributes * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved @@ -3181,6 +3263,8 @@ enum nl80211_mpath_info { * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as * defined in 802.11ac * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using + * attributes from &enum nl80211_band_iftype_attr * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -3196,6 +3280,7 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_VHT_MCS_SET, NL80211_BAND_ATTR_VHT_CAPA, + NL80211_BAND_ATTR_IFTYPE_DATA, /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, diff --git a/net/wireless/core.c b/net/wireless/core.c index 5fe35aafdd9c..d23abc619e77 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -3,7 +3,7 @@ * * Copyright 2006-2010 Johannes Berg * Copyright 2013-2014 Intel Mobile Communications GmbH - * Copyright 2015 Intel Deutschland GmbH + * Copyright 2015-2017 Intel Deutschland GmbH */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -744,6 +744,8 @@ int wiphy_register(struct wiphy *wiphy) /* sanity check supported bands/channels */ for (band = 0; band < NUM_NL80211_BANDS; band++) { + u16 types = 0; + sband = wiphy->bands[band]; if (!sband) continue; @@ -788,6 +790,23 @@ int wiphy_register(struct wiphy *wiphy) sband->channels[i].band = band; } + for (i = 0; i < sband->n_iftype_data; i++) { + const struct ieee80211_sband_iftype_data *iftd; + + iftd = &sband->iftype_data[i]; + + if (WARN_ON(!iftd->types_mask)) + return -EINVAL; + if (WARN_ON(types & iftd->types_mask)) + return -EINVAL; + + /* at least one piece of information must be present */ + if (WARN_ON(!iftd->he_cap.has_he)) + return -EINVAL; + + types |= iftd->types_mask; + } + have_band = true; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7b21914ae18b..0ccce338a66e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -428,6 +428,8 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { [NL80211_ATTR_TXQ_LIMIT] = { .type = NLA_U32 }, [NL80211_ATTR_TXQ_MEMORY_LIMIT] = { .type = NLA_U32 }, [NL80211_ATTR_TXQ_QUANTUM] = { .type = NLA_U32 }, + [NL80211_ATTR_HE_CAPABILITY] = { .type = NLA_BINARY, + .len = NL80211_HE_MAX_CAPABILITY_LEN }, }; /* policy for the key attributes */ @@ -1324,6 +1326,34 @@ static int nl80211_send_coalesce(struct sk_buff *msg, return 0; } +static int +nl80211_send_iftype_data(struct sk_buff *msg, + const struct ieee80211_sband_iftype_data *iftdata) +{ + const struct ieee80211_sta_he_cap *he_cap = &iftdata->he_cap; + + if (nl80211_put_iftypes(msg, NL80211_BAND_IFTYPE_ATTR_IFTYPES, + iftdata->types_mask)) + return -ENOBUFS; + + if (he_cap->has_he) { + if (nla_put(msg, NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, + sizeof(he_cap->he_cap_elem.mac_cap_info), + he_cap->he_cap_elem.mac_cap_info) || + nla_put(msg, NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, + sizeof(he_cap->he_cap_elem.phy_cap_info), + he_cap->he_cap_elem.phy_cap_info) || + nla_put(msg, NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, + sizeof(he_cap->he_mcs_nss_supp), + &he_cap->he_mcs_nss_supp) || + nla_put(msg, NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, + sizeof(he_cap->ppe_thres), he_cap->ppe_thres)) + return -ENOBUFS; + } + + return 0; +} + static int nl80211_send_band_rateinfo(struct sk_buff *msg, struct ieee80211_supported_band *sband) { @@ -1353,6 +1383,32 @@ static int nl80211_send_band_rateinfo(struct sk_buff *msg, sband->vht_cap.cap))) return -ENOBUFS; + if (sband->n_iftype_data) { + struct nlattr *nl_iftype_data = + nla_nest_start(msg, NL80211_BAND_ATTR_IFTYPE_DATA); + int err; + + if (!nl_iftype_data) + return -ENOBUFS; + + for (i = 0; i < sband->n_iftype_data; i++) { + struct nlattr *iftdata; + + iftdata = nla_nest_start(msg, i + 1); + if (!iftdata) + return -ENOBUFS; + + err = nl80211_send_iftype_data(msg, + &sband->iftype_data[i]); + if (err) + return err; + + nla_nest_end(msg, iftdata); + } + + nla_nest_end(msg, nl_iftype_data); + } + /* add bitrates */ nl_rates = nla_nest_start(msg, NL80211_BAND_ATTR_RATES); if (!nl_rates) @@ -4472,6 +4528,9 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info, case RATE_INFO_BW_160: rate_flg = NL80211_RATE_INFO_160_MHZ_WIDTH; break; + case RATE_INFO_BW_HE_RU: + rate_flg = 0; + WARN_ON(!(info->flags & RATE_INFO_FLAGS_HE_MCS)); } if (rate_flg && nla_put_flag(msg, rate_flg)) @@ -4491,6 +4550,19 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info, if (info->flags & RATE_INFO_FLAGS_SHORT_GI && nla_put_flag(msg, NL80211_RATE_INFO_SHORT_GI)) return false; + } else if (info->flags & RATE_INFO_FLAGS_HE_MCS) { + if (nla_put_u8(msg, NL80211_RATE_INFO_HE_MCS, info->mcs)) + return false; + if (nla_put_u8(msg, NL80211_RATE_INFO_HE_NSS, info->nss)) + return false; + if (nla_put_u8(msg, NL80211_RATE_INFO_HE_GI, info->he_gi)) + return false; + if (nla_put_u8(msg, NL80211_RATE_INFO_HE_DCM, info->he_dcm)) + return false; + if (info->bw == RATE_INFO_BW_HE_RU && + nla_put_u8(msg, NL80211_RATE_INFO_HE_RU_ALLOC, + info->he_ru_alloc)) + return false; } nla_nest_end(msg, rate); @@ -4887,7 +4959,8 @@ int cfg80211_check_station_change(struct wiphy *wiphy, return -EINVAL; if (params->supported_rates) return -EINVAL; - if (params->ext_capab || params->ht_capa || params->vht_capa) + if (params->ext_capab || params->ht_capa || params->vht_capa || + params->he_capa) return -EINVAL; } @@ -5093,6 +5166,15 @@ static int nl80211_set_station_tdls(struct genl_info *info, if (info->attrs[NL80211_ATTR_VHT_CAPABILITY]) params->vht_capa = nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]); + if (info->attrs[NL80211_ATTR_HE_CAPABILITY]) { + params->he_capa = + nla_data(info->attrs[NL80211_ATTR_HE_CAPABILITY]); + params->he_capa_len = + nla_len(info->attrs[NL80211_ATTR_HE_CAPABILITY]); + + if (params->he_capa_len < NL80211_HE_MIN_CAPABILITY_LEN) + return -EINVAL; + } err = nl80211_parse_sta_channel_info(info, params); if (err) @@ -5320,6 +5402,17 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) params.vht_capa = nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]); + if (info->attrs[NL80211_ATTR_HE_CAPABILITY]) { + params.he_capa = + nla_data(info->attrs[NL80211_ATTR_HE_CAPABILITY]); + params.he_capa_len = + nla_len(info->attrs[NL80211_ATTR_HE_CAPABILITY]); + + /* max len is validated in nla policy */ + if (params.he_capa_len < NL80211_HE_MIN_CAPABILITY_LEN) + return -EINVAL; + } + if (info->attrs[NL80211_ATTR_OPMODE_NOTIF]) { params.opmode_notif_used = true; params.opmode_notif = @@ -5352,6 +5445,10 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) if (!(params.sta_flags_set & BIT(NL80211_STA_FLAG_WME))) { params.ht_capa = NULL; params.vht_capa = NULL; + + /* HE requires WME */ + if (params.he_capa_len) + return -EINVAL; } /* When you run into this, adjust the code below for the new flag */ diff --git a/net/wireless/util.c b/net/wireless/util.c index b91597a8baa2..4ed06b271f32 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -4,6 +4,7 @@ * * Copyright 2007-2009 Johannes Berg * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright 2017 Intel Deutschland GmbH */ #include #include @@ -1142,6 +1143,85 @@ static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate) return 0; } +static u32 cfg80211_calculate_bitrate_he(struct rate_info *rate) +{ +#define SCALE 2048 + u16 mcs_divisors[12] = { + 34133, /* 16.666666... */ + 17067, /* 8.333333... */ + 11378, /* 5.555555... */ + 8533, /* 4.166666... */ + 5689, /* 2.777777... */ + 4267, /* 2.083333... */ + 3923, /* 1.851851... */ + 3413, /* 1.666666... */ + 2844, /* 1.388888... */ + 2560, /* 1.250000... */ + 2276, /* 1.111111... */ + 2048, /* 1.000000... */ + }; + u32 rates_160M[3] = { 960777777, 907400000, 816666666 }; + u32 rates_969[3] = { 480388888, 453700000, 408333333 }; + u32 rates_484[3] = { 229411111, 216666666, 195000000 }; + u32 rates_242[3] = { 114711111, 108333333, 97500000 }; + u32 rates_106[3] = { 40000000, 37777777, 34000000 }; + u32 rates_52[3] = { 18820000, 17777777, 16000000 }; + u32 rates_26[3] = { 9411111, 8888888, 8000000 }; + u64 tmp; + u32 result; + + if (WARN_ON_ONCE(rate->mcs > 11)) + return 0; + + if (WARN_ON_ONCE(rate->he_gi > NL80211_RATE_INFO_HE_GI_3_2)) + return 0; + if (WARN_ON_ONCE(rate->he_ru_alloc > + NL80211_RATE_INFO_HE_RU_ALLOC_2x996)) + return 0; + if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8)) + return 0; + + if (rate->bw == RATE_INFO_BW_160) + result = rates_160M[rate->he_gi]; + else if (rate->bw == RATE_INFO_BW_80 || + (rate->bw == RATE_INFO_BW_HE_RU && + rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_996)) + result = rates_969[rate->he_gi]; + else if (rate->bw == RATE_INFO_BW_40 || + (rate->bw == RATE_INFO_BW_HE_RU && + rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_484)) + result = rates_484[rate->he_gi]; + else if (rate->bw == RATE_INFO_BW_20 || + (rate->bw == RATE_INFO_BW_HE_RU && + rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_242)) + result = rates_242[rate->he_gi]; + else if (rate->bw == RATE_INFO_BW_HE_RU && + rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_106) + result = rates_106[rate->he_gi]; + else if (rate->bw == RATE_INFO_BW_HE_RU && + rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_52) + result = rates_52[rate->he_gi]; + else if (rate->bw == RATE_INFO_BW_HE_RU && + rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_26) + result = rates_26[rate->he_gi]; + else if (WARN(1, "invalid HE MCS: bw:%d, ru:%d\n", + rate->bw, rate->he_ru_alloc)) + return 0; + + /* now scale to the appropriate MCS */ + tmp = result; + tmp *= SCALE; + do_div(tmp, mcs_divisors[rate->mcs]); + result = tmp; + + /* and take NSS, DCM into account */ + result = (result * rate->nss) / 8; + if (rate->he_dcm) + result /= 2; + + return result; +} + u32 cfg80211_calculate_bitrate(struct rate_info *rate) { if (rate->flags & RATE_INFO_FLAGS_MCS) @@ -1150,6 +1230,8 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate) return cfg80211_calculate_bitrate_60g(rate); if (rate->flags & RATE_INFO_FLAGS_VHT_MCS) return cfg80211_calculate_bitrate_vht(rate); + if (rate->flags & RATE_INFO_FLAGS_HE_MCS) + return cfg80211_calculate_bitrate_he(rate); return rate->legacy; } -- cgit v1.2.3-58-ga151 From fe0984d38938249f3f11fc558a8845fc6f8a0105 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 18 Jun 2018 17:11:14 +0200 Subject: cfg80211: track time using boottime The cfg80211 layer uses get_seconds() to read the current time in its supend handling. This function is deprecated because of the 32-bit time_t overflow, and it can cause unexpected behavior when the time changes due to settimeofday() calls or leap second updates. In many cases, we want to use monotonic time instead, however cfg80211 explicitly tracks the time spent in suspend, so this changes the driver over to use ktime_get_boottime_seconds(), which is slightly slower, but not used in a fastpath here. Signed-off-by: Arnd Bergmann Signed-off-by: Johannes Berg --- net/wireless/core.h | 2 +- net/wireless/sysfs.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/core.h b/net/wireless/core.h index 63eb1b5fdd04..7f52ef569320 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -76,7 +76,7 @@ struct cfg80211_registered_device { struct cfg80211_scan_request *scan_req; /* protected by RTNL */ struct sk_buff *scan_msg; struct list_head sched_scan_req_list; - unsigned long suspend_at; + time64_t suspend_at; struct work_struct scan_done_wk; struct genl_info *cur_cmd_info; diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c index 570a2b67ca10..6ab32f6a1961 100644 --- a/net/wireless/sysfs.c +++ b/net/wireless/sysfs.c @@ -102,7 +102,7 @@ static int wiphy_suspend(struct device *dev) struct cfg80211_registered_device *rdev = dev_to_rdev(dev); int ret = 0; - rdev->suspend_at = get_seconds(); + rdev->suspend_at = ktime_get_boottime_seconds(); rtnl_lock(); if (rdev->wiphy.registered) { @@ -130,7 +130,7 @@ static int wiphy_resume(struct device *dev) int ret = 0; /* Age scan results with time spent in suspend */ - cfg80211_bss_age(rdev, get_seconds() - rdev->suspend_at); + cfg80211_bss_age(rdev, ktime_get_boottime_seconds() - rdev->suspend_at); rtnl_lock(); if (rdev->wiphy.registered && rdev->ops->resume) -- cgit v1.2.3-58-ga151 From 397c657a0644e7607c6aebea84d2b0f08ab59dfc Mon Sep 17 00:00:00 2001 From: Omer Efrat Date: Sun, 17 Jun 2018 13:06:14 +0300 Subject: cfg80211: use BIT_ULL for NL80211_STA_INFO_* attribute types The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in cfg80211 by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 26 +++++++++++++------------- net/wireless/wext-compat.c | 10 +++++----- 2 files changed, 18 insertions(+), 18 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 0ccce338a66e..350d2962524c 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4619,13 +4619,13 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid, #define PUT_SINFO(attr, memb, type) do { \ BUILD_BUG_ON(sizeof(type) == sizeof(u64)); \ - if (sinfo->filled & (1ULL << NL80211_STA_INFO_ ## attr) && \ + if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_ ## attr) && \ nla_put_ ## type(msg, NL80211_STA_INFO_ ## attr, \ sinfo->memb)) \ goto nla_put_failure; \ } while (0) #define PUT_SINFO_U64(attr, memb) do { \ - if (sinfo->filled & (1ULL << NL80211_STA_INFO_ ## attr) && \ + if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_ ## attr) && \ nla_put_u64_64bit(msg, NL80211_STA_INFO_ ## attr, \ sinfo->memb, NL80211_STA_INFO_PAD)) \ goto nla_put_failure; \ @@ -4634,14 +4634,14 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid, PUT_SINFO(CONNECTED_TIME, connected_time, u32); PUT_SINFO(INACTIVE_TIME, inactive_time, u32); - if (sinfo->filled & (BIT(NL80211_STA_INFO_RX_BYTES) | - BIT(NL80211_STA_INFO_RX_BYTES64)) && + if (sinfo->filled & (BIT_ULL(NL80211_STA_INFO_RX_BYTES) | + BIT_ULL(NL80211_STA_INFO_RX_BYTES64)) && nla_put_u32(msg, NL80211_STA_INFO_RX_BYTES, (u32)sinfo->rx_bytes)) goto nla_put_failure; - if (sinfo->filled & (BIT(NL80211_STA_INFO_TX_BYTES) | - BIT(NL80211_STA_INFO_TX_BYTES64)) && + if (sinfo->filled & (BIT_ULL(NL80211_STA_INFO_TX_BYTES) | + BIT_ULL(NL80211_STA_INFO_TX_BYTES64)) && nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES, (u32)sinfo->tx_bytes)) goto nla_put_failure; @@ -4661,24 +4661,24 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid, default: break; } - if (sinfo->filled & BIT(NL80211_STA_INFO_CHAIN_SIGNAL)) { + if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL)) { if (!nl80211_put_signal(msg, sinfo->chains, sinfo->chain_signal, NL80211_STA_INFO_CHAIN_SIGNAL)) goto nla_put_failure; } - if (sinfo->filled & BIT(NL80211_STA_INFO_CHAIN_SIGNAL_AVG)) { + if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL_AVG)) { if (!nl80211_put_signal(msg, sinfo->chains, sinfo->chain_signal_avg, NL80211_STA_INFO_CHAIN_SIGNAL_AVG)) goto nla_put_failure; } - if (sinfo->filled & BIT(NL80211_STA_INFO_TX_BITRATE)) { + if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_TX_BITRATE)) { if (!nl80211_put_sta_rate(msg, &sinfo->txrate, NL80211_STA_INFO_TX_BITRATE)) goto nla_put_failure; } - if (sinfo->filled & BIT(NL80211_STA_INFO_RX_BITRATE)) { + if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_RX_BITRATE)) { if (!nl80211_put_sta_rate(msg, &sinfo->rxrate, NL80211_STA_INFO_RX_BITRATE)) goto nla_put_failure; @@ -4694,7 +4694,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid, PUT_SINFO(PEER_PM, peer_pm, u32); PUT_SINFO(NONPEER_PM, nonpeer_pm, u32); - if (sinfo->filled & BIT(NL80211_STA_INFO_BSS_PARAM)) { + if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_BSS_PARAM)) { bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM); if (!bss_param) goto nla_put_failure; @@ -4713,7 +4713,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid, nla_nest_end(msg, bss_param); } - if ((sinfo->filled & BIT(NL80211_STA_INFO_STA_FLAGS)) && + if ((sinfo->filled & BIT_ULL(NL80211_STA_INFO_STA_FLAGS)) && nla_put(msg, NL80211_STA_INFO_STA_FLAGS, sizeof(struct nl80211_sta_flag_update), &sinfo->sta_flags)) @@ -10266,7 +10266,7 @@ static int cfg80211_cqm_rssi_update(struct cfg80211_registered_device *rdev, if (err) return err; - if (sinfo.filled & BIT(NL80211_STA_INFO_BEACON_SIGNAL_AVG)) + if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_BEACON_SIGNAL_AVG)) wdev->cqm_config->last_rssi_event_value = (s8) sinfo.rx_beacon_signal_avg; } diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 05186a47878f..167f7025ac98 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -1278,7 +1278,7 @@ static int cfg80211_wext_giwrate(struct net_device *dev, if (err) return err; - if (!(sinfo.filled & BIT(NL80211_STA_INFO_TX_BITRATE))) + if (!(sinfo.filled & BIT_ULL(NL80211_STA_INFO_TX_BITRATE))) return -EOPNOTSUPP; rate->value = 100000 * cfg80211_calculate_bitrate(&sinfo.txrate); @@ -1320,7 +1320,7 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev) switch (rdev->wiphy.signal_type) { case CFG80211_SIGNAL_TYPE_MBM: - if (sinfo.filled & BIT(NL80211_STA_INFO_SIGNAL)) { + if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_SIGNAL)) { int sig = sinfo.signal; wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED; wstats.qual.updated |= IW_QUAL_QUAL_UPDATED; @@ -1334,7 +1334,7 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev) break; } case CFG80211_SIGNAL_TYPE_UNSPEC: - if (sinfo.filled & BIT(NL80211_STA_INFO_SIGNAL)) { + if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_SIGNAL)) { wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED; wstats.qual.updated |= IW_QUAL_QUAL_UPDATED; wstats.qual.level = sinfo.signal; @@ -1347,9 +1347,9 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev) } wstats.qual.updated |= IW_QUAL_NOISE_INVALID; - if (sinfo.filled & BIT(NL80211_STA_INFO_RX_DROP_MISC)) + if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_RX_DROP_MISC)) wstats.discard.misc = sinfo.rx_dropped_misc; - if (sinfo.filled & BIT(NL80211_STA_INFO_TX_FAILED)) + if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_TX_FAILED)) wstats.discard.retries = sinfo.tx_failed; return &wstats; -- cgit v1.2.3-58-ga151