From 3f2fb9a834cb1fcddbae22deca7fde136944dc89 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 24 Feb 2016 11:47:02 -0800 Subject: net: l3mdev: address selection should only consider devices in L3 domain David Lamparter noted a use case where the source address selection fails to pick an address from a VRF interface - unnumbered interfaces. Relevant commands from his script: ip addr add 9.9.9.9/32 dev lo ip link set lo up ip link add name vrf0 type vrf table 101 ip rule add oif vrf0 table 101 ip rule add iif vrf0 table 101 ip link set vrf0 up ip addr add 10.0.0.3/32 dev vrf0 ip link add name dummy2 type dummy ip link set dummy2 master vrf0 up --> note dummy2 has no address - unnumbered device ip route add 10.2.2.2/32 dev dummy2 table 101 ip neigh add 10.2.2.2 dev dummy2 lladdr 02:00:00:00:00:02 tcpdump -ni dummy2 & And using ping instead of his socat example: $ ping -I vrf0 -c1 10.2.2.2 ping: Warning: source address might be selected on device other than vrf0. PING 10.2.2.2 (10.2.2.2) from 9.9.9.9 vrf0: 56(84) bytes of data. >From tcpdump: 12:57:29.449128 IP 9.9.9.9 > 10.2.2.2: ICMP echo request, id 2491, seq 1, length 64 Note the source address is from lo and is not a VRF local address. With this patch: $ ping -I vrf0 -c1 10.2.2.2 PING 10.2.2.2 (10.2.2.2) from 10.0.0.3 vrf0: 56(84) bytes of data. >From tcpdump: 12:59:25.096426 IP 10.0.0.3 > 10.2.2.2: ICMP echo request, id 2113, seq 1, length 64 Now the source address comes from vrf0. The ipv4 function for selecting source address takes a const argument. Removing the const requires touching a lot of places, so instead l3mdev_master_ifindex_rcu is changed to take a const argument and then do the typecast to non-const as required by netdev_master_upper_dev_get_rcu. This is similar to what l3mdev_fib_table_rcu does. IPv6 for unnumbered interfaces appears to be selecting the addresses properly. Cc: David Lamparter Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'net/ipv4') diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 29b8d3a7b19b..18d510fa7ee2 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1194,6 +1194,7 @@ __be32 inet_select_addr(const struct net_device *dev, __be32 dst, int scope) __be32 addr = 0; struct in_device *in_dev; struct net *net = dev_net(dev); + int master_idx; rcu_read_lock(); in_dev = __in_dev_get_rcu(dev); @@ -1214,12 +1215,16 @@ __be32 inet_select_addr(const struct net_device *dev, __be32 dst, int scope) if (addr) goto out_unlock; no_in_dev: + master_idx = l3mdev_master_ifindex_rcu(dev); /* Not loopback addresses on loopback should be preferred in this case. It is important that lo is the first interface in dev_base list. */ for_each_netdev_rcu(net, dev) { + if (l3mdev_master_ifindex_rcu(dev) != master_idx) + continue; + in_dev = __in_dev_get_rcu(dev); if (!in_dev) continue; -- cgit v1.2.3-58-ga151