From d7d4cfc4c97c7cf49cb2893ef60e8ab59dcac047 Mon Sep 17 00:00:00 2001 From: Danielle Ratson Date: Thu, 27 Jun 2024 17:08:51 +0300 Subject: ethtool: Add flashing transceiver modules' firmware notifications ability Add progress notifications ability to user space while flashing modules' firmware by implementing the interface between the user space and the kernel. Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- net/ethtool/module_fw.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 net/ethtool/module_fw.h (limited to 'net/ethtool/module_fw.h') diff --git a/net/ethtool/module_fw.h b/net/ethtool/module_fw.h new file mode 100644 index 000000000000..ee4a291ac1d4 --- /dev/null +++ b/net/ethtool/module_fw.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +/** + * struct ethnl_module_fw_flash_ntf_params - module firmware flashing + * notifications parameters + * @portid: Netlink portid of sender. + * @seq: Sequence number of sender. + * @closed_sock: Indicates whether the socket was closed from user space. + */ +struct ethnl_module_fw_flash_ntf_params { + u32 portid; + u32 seq; + bool closed_sock; +}; + +void +ethnl_module_fw_flash_ntf_err(struct net_device *dev, + struct ethnl_module_fw_flash_ntf_params *params, + char *err_msg, char *sub_err_msg); +void +ethnl_module_fw_flash_ntf_start(struct net_device *dev, + struct ethnl_module_fw_flash_ntf_params *params); +void +ethnl_module_fw_flash_ntf_complete(struct net_device *dev, + struct ethnl_module_fw_flash_ntf_params *params); +void +ethnl_module_fw_flash_ntf_in_progress(struct net_device *dev, + struct ethnl_module_fw_flash_ntf_params *params, + u64 done, u64 total); -- cgit v1.2.3-58-ga151 From a39c84d796254e6b1662ca0c46dbc313379e9291 Mon Sep 17 00:00:00 2001 From: Danielle Ratson Date: Thu, 27 Jun 2024 17:08:54 +0300 Subject: ethtool: cmis_cdb: Add a layer for supporting CDB commands CDB (Command Data Block Message Communication) reads and writes are performed on memory map pages 9Fh-AFh according to the CMIS standard, section 8.20 of revision 5.2. Page 9Fh is used to specify the CDB command to be executed and also provides an area for a local payload (LPL). According to the CMIS standard, the firmware update process is done using a CDB commands sequence that will be implemented in the next patch. The kernel interface that will implement the firmware update using CDB command will include 2 layers that will be added under ethtool: * The upper layer that will be triggered from the module layer, is cmis_fw_update. * The lower one is cmis_cdb. In the future there might be more operations to implement using CDB commands. Therefore, the idea is to keep the CDB interface clean and the cmis_fw_update specific to the CDB commands handling it. These two layers will communicate using the API the consists of three functions: - struct ethtool_cmis_cdb * ethtool_cmis_cdb_init(struct net_device *dev, struct ethtool_module_fw_flash_params *params); - void ethtool_cmis_cdb_fini(struct ethtool_cmis_cdb *cdb); - int ethtool_cmis_cdb_execute_cmd(struct net_device *dev, struct ethtool_cmis_cdb_cmd_args *args); Add the CDB layer to support initializing, finishing and executing CDB commands: * The initialization process will include creating of an ethtool_cmis_cdb instance, querying the module CDB support, entering and validating the password from user space (CMD 0x0000) and querying the module features (CMD 0x0040). * The finishing API will simply free the ethtool_cmis_cdb instance. * The executing process will write the CDB command to EEPROM using set_module_eeprom_by_page() that was presented earlier, and will process the reply from EEPROM. Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: David S. Miller --- net/ethtool/Makefile | 2 +- net/ethtool/cmis.h | 117 ++++++++++ net/ethtool/cmis_cdb.c | 602 ++++++++++++++++++++++++++++++++++++++++++++++++ net/ethtool/module_fw.h | 10 + 4 files changed, 730 insertions(+), 1 deletion(-) create mode 100644 net/ethtool/cmis.h create mode 100644 net/ethtool/cmis_cdb.c (limited to 'net/ethtool/module_fw.h') diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile index 504f954a1b28..38806b3ecf83 100644 --- a/net/ethtool/Makefile +++ b/net/ethtool/Makefile @@ -8,4 +8,4 @@ ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o linkmodes.o rss.o \ linkstate.o debug.o wol.o features.o privflags.o rings.o \ channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \ tunnels.o fec.o eeprom.o stats.o phc_vclocks.o mm.o \ - module.o pse-pd.o plca.o mm.o + module.o cmis_cdb.o pse-pd.o plca.o mm.o diff --git a/net/ethtool/cmis.h b/net/ethtool/cmis.h new file mode 100644 index 000000000000..295f5d0df915 --- /dev/null +++ b/net/ethtool/cmis.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#define ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH 120 +#define ETHTOOL_CMIS_CDB_CMD_PAGE 0x9F +#define ETHTOOL_CMIS_CDB_PAGE_I2C_ADDR 0x50 + +/** + * struct ethtool_cmis_cdb - CDB commands parameters + * @cmis_rev: CMIS revision major. + * @read_write_len_ext: Allowable additional number of byte octets to the LPL + * in a READ or a WRITE CDB commands. + * @max_completion_time: Maximum CDB command completion time in msec. + */ +struct ethtool_cmis_cdb { + u8 cmis_rev; + u8 read_write_len_ext; + u16 max_completion_time; +}; + +enum ethtool_cmis_cdb_cmd_id { + ETHTOOL_CMIS_CDB_CMD_QUERY_STATUS = 0x0000, + ETHTOOL_CMIS_CDB_CMD_MODULE_FEATURES = 0x0040, +}; + +/** + * struct ethtool_cmis_cdb_request - CDB commands request fields as decribed in + * the CMIS standard + * @id: Command ID. + * @epl_len: EPL memory length. + * @lpl_len: LPL memory length. + * @chk_code: Check code for the previous field and the payload. + * @resv1: Added to match the CMIS standard request continuity. + * @resv2: Added to match the CMIS standard request continuity. + * @payload: Payload for the CDB commands. + */ +struct ethtool_cmis_cdb_request { + __be16 id; + struct_group(body, + __be16 epl_len; + u8 lpl_len; + u8 chk_code; + u8 resv1; + u8 resv2; + u8 payload[ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH]; + ); +}; + +#define CDB_F_COMPLETION_VALID BIT(0) +#define CDB_F_STATUS_VALID BIT(1) + +/** + * struct ethtool_cmis_cdb_cmd_args - CDB commands execution arguments + * @req: CDB command fields as described in the CMIS standard. + * @max_duration: Maximum duration time for command completion in msec. + * @read_write_len_ext: Allowable additional number of byte octets to the LPL + * in a READ or a WRITE commands. + * @msleep_pre_rpl: Waiting time before checking reply in msec. + * @rpl_exp_len: Expected reply length in bytes. + * @flags: Validation flags for CDB commands. + * @err_msg: Error message to be sent to user space. + */ +struct ethtool_cmis_cdb_cmd_args { + struct ethtool_cmis_cdb_request req; + u16 max_duration; + u8 read_write_len_ext; + u8 msleep_pre_rpl; + u8 rpl_exp_len; + u8 flags; + char *err_msg; +}; + +/** + * struct ethtool_cmis_cdb_rpl_hdr - CDB commands reply header arguments + * @rpl_len: Reply length. + * @rpl_chk_code: Reply check code. + */ +struct ethtool_cmis_cdb_rpl_hdr { + u8 rpl_len; + u8 rpl_chk_code; +}; + +/** + * struct ethtool_cmis_cdb_rpl - CDB commands reply arguments + * @hdr: CDB commands reply header arguments. + * @payload: Payload for the CDB commands reply. + */ +struct ethtool_cmis_cdb_rpl { + struct ethtool_cmis_cdb_rpl_hdr hdr; + u8 payload[ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH]; +}; + +u32 ethtool_cmis_get_max_payload_size(u8 num_of_byte_octs); + +void ethtool_cmis_cdb_compose_args(struct ethtool_cmis_cdb_cmd_args *args, + enum ethtool_cmis_cdb_cmd_id cmd, u8 *pl, + u8 lpl_len, u16 max_duration, + u8 read_write_len_ext, u16 msleep_pre_rpl, + u8 rpl_exp_len, u8 flags); + +void ethtool_cmis_cdb_check_completion_flag(u8 cmis_rev, u8 *flags); + +void ethtool_cmis_page_init(struct ethtool_module_eeprom *page_data, + u8 page, u32 offset, u32 length); +void ethtool_cmis_page_fini(struct ethtool_module_eeprom *page_data); + +struct ethtool_cmis_cdb * +ethtool_cmis_cdb_init(struct net_device *dev, + const struct ethtool_module_fw_flash_params *params, + struct ethnl_module_fw_flash_ntf_params *ntf_params); +void ethtool_cmis_cdb_fini(struct ethtool_cmis_cdb *cdb); + +int ethtool_cmis_wait_for_cond(struct net_device *dev, u8 flags, u8 flag, + u16 max_duration, u32 offset, + bool (*cond_success)(u8), bool (*cond_fail)(u8), u8 *state); + +int ethtool_cmis_cdb_execute_cmd(struct net_device *dev, + struct ethtool_cmis_cdb_cmd_args *args); diff --git a/net/ethtool/cmis_cdb.c b/net/ethtool/cmis_cdb.c new file mode 100644 index 000000000000..1bb08783b60d --- /dev/null +++ b/net/ethtool/cmis_cdb.c @@ -0,0 +1,602 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include + +#include "common.h" +#include "module_fw.h" +#include "cmis.h" + +/* For accessing the LPL field on page 9Fh, the allowable length extension is + * min(i, 15) byte octets where i specifies the allowable additional number of + * byte octets in a READ or a WRITE. + */ +u32 ethtool_cmis_get_max_payload_size(u8 num_of_byte_octs) +{ + return 8 * (1 + min_t(u8, num_of_byte_octs, 15)); +} + +void ethtool_cmis_cdb_compose_args(struct ethtool_cmis_cdb_cmd_args *args, + enum ethtool_cmis_cdb_cmd_id cmd, u8 *pl, + u8 lpl_len, u16 max_duration, + u8 read_write_len_ext, u16 msleep_pre_rpl, + u8 rpl_exp_len, u8 flags) +{ + args->req.id = cpu_to_be16(cmd); + args->req.lpl_len = lpl_len; + if (pl) + memcpy(args->req.payload, pl, args->req.lpl_len); + + args->max_duration = max_duration; + args->read_write_len_ext = + ethtool_cmis_get_max_payload_size(read_write_len_ext); + args->msleep_pre_rpl = msleep_pre_rpl; + args->rpl_exp_len = rpl_exp_len; + args->flags = flags; + args->err_msg = NULL; +} + +void ethtool_cmis_page_init(struct ethtool_module_eeprom *page_data, + u8 page, u32 offset, u32 length) +{ + page_data->page = page; + page_data->offset = offset; + page_data->length = length; + page_data->i2c_address = ETHTOOL_CMIS_CDB_PAGE_I2C_ADDR; +} + +#define CMIS_REVISION_PAGE 0x00 +#define CMIS_REVISION_OFFSET 0x01 + +struct cmis_rev_rpl { + u8 rev; +}; + +static u8 cmis_rev_rpl_major(struct cmis_rev_rpl *rpl) +{ + return rpl->rev >> 4; +} + +static int cmis_rev_major_get(struct net_device *dev, u8 *rev_major) +{ + const struct ethtool_ops *ops = dev->ethtool_ops; + struct ethtool_module_eeprom page_data = {0}; + struct netlink_ext_ack extack = {}; + struct cmis_rev_rpl rpl = {}; + int err; + + ethtool_cmis_page_init(&page_data, CMIS_REVISION_PAGE, + CMIS_REVISION_OFFSET, sizeof(rpl)); + page_data.data = (u8 *)&rpl; + + err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); + if (err < 0) { + if (extack._msg) + netdev_err(dev, "%s\n", extack._msg); + return err; + } + + *rev_major = cmis_rev_rpl_major(&rpl); + + return 0; +} + +#define CMIS_CDB_ADVERTISEMENT_PAGE 0x01 +#define CMIS_CDB_ADVERTISEMENT_OFFSET 0xA3 + +/* Based on section 8.4.11 "CDB Messaging Support Advertisement" in CMIS + * standard revision 5.2. + */ +struct cmis_cdb_advert_rpl { + u8 inst_supported; + u8 read_write_len_ext; + u8 resv1; + u8 resv2; +}; + +static u8 cmis_cdb_advert_rpl_inst_supported(struct cmis_cdb_advert_rpl *rpl) +{ + return rpl->inst_supported >> 6; +} + +static int cmis_cdb_advertisement_get(struct ethtool_cmis_cdb *cdb, + struct net_device *dev) +{ + const struct ethtool_ops *ops = dev->ethtool_ops; + struct ethtool_module_eeprom page_data = {}; + struct cmis_cdb_advert_rpl rpl = {}; + struct netlink_ext_ack extack = {}; + int err; + + ethtool_cmis_page_init(&page_data, CMIS_CDB_ADVERTISEMENT_PAGE, + CMIS_CDB_ADVERTISEMENT_OFFSET, sizeof(rpl)); + page_data.data = (u8 *)&rpl; + + err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); + if (err < 0) { + if (extack._msg) + netdev_err(dev, "%s\n", extack._msg); + return err; + } + + if (!cmis_cdb_advert_rpl_inst_supported(&rpl)) + return -EOPNOTSUPP; + + cdb->read_write_len_ext = rpl.read_write_len_ext; + + return 0; +} + +#define CMIS_PASSWORD_ENTRY_PAGE 0x00 +#define CMIS_PASSWORD_ENTRY_OFFSET 0x7A + +struct cmis_password_entry_pl { + __be32 password; +}; + +/* See section 9.3.1 "CMD 0000h: Query Status" in CMIS standard revision 5.2. + * struct cmis_cdb_query_status_pl and struct cmis_cdb_query_status_rpl are + * structured layouts of the flat arrays, + * struct ethtool_cmis_cdb_request::payload and + * struct ethtool_cmis_cdb_rpl::payload respectively. + */ +struct cmis_cdb_query_status_pl { + u16 response_delay; +}; + +struct cmis_cdb_query_status_rpl { + u8 length; + u8 status; +}; + +static int +cmis_cdb_validate_password(struct ethtool_cmis_cdb *cdb, + struct net_device *dev, + const struct ethtool_module_fw_flash_params *params, + struct ethnl_module_fw_flash_ntf_params *ntf_params) +{ + const struct ethtool_ops *ops = dev->ethtool_ops; + struct cmis_cdb_query_status_pl qs_pl = {0}; + struct ethtool_module_eeprom page_data = {}; + struct ethtool_cmis_cdb_cmd_args args = {}; + struct cmis_password_entry_pl pe_pl = {}; + struct cmis_cdb_query_status_rpl *rpl; + struct netlink_ext_ack extack = {}; + int err; + + ethtool_cmis_page_init(&page_data, CMIS_PASSWORD_ENTRY_PAGE, + CMIS_PASSWORD_ENTRY_OFFSET, sizeof(pe_pl)); + page_data.data = (u8 *)&pe_pl; + + pe_pl = *((struct cmis_password_entry_pl *)page_data.data); + pe_pl.password = params->password; + err = ops->set_module_eeprom_by_page(dev, &page_data, &extack); + if (err < 0) { + if (extack._msg) + netdev_err(dev, "%s\n", extack._msg); + return err; + } + + ethtool_cmis_cdb_compose_args(&args, ETHTOOL_CMIS_CDB_CMD_QUERY_STATUS, + (u8 *)&qs_pl, sizeof(qs_pl), 0, + cdb->read_write_len_ext, 1000, + sizeof(*rpl), + CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID); + + err = ethtool_cmis_cdb_execute_cmd(dev, &args); + if (err < 0) { + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "Query Status command failed", + args.err_msg); + return err; + } + + rpl = (struct cmis_cdb_query_status_rpl *)args.req.payload; + if (!rpl->length || !rpl->status) { + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "Password was not accepted", + NULL); + return -EINVAL; + } + + return 0; +} + +/* Some CDB commands asserts the CDB completion flag only from CMIS + * revision 5. Therefore, check the relevant validity flag only when + * the revision supports it. + */ +void ethtool_cmis_cdb_check_completion_flag(u8 cmis_rev, u8 *flags) +{ + *flags |= cmis_rev >= 5 ? CDB_F_COMPLETION_VALID : 0; +} + +#define CMIS_CDB_MODULE_FEATURES_RESV_DATA 34 + +/* See section 9.4.1 "CMD 0040h: Module Features" in CMIS standard revision 5.2. + * struct cmis_cdb_module_features_rpl is structured layout of the flat + * array, ethtool_cmis_cdb_rpl::payload. + */ +struct cmis_cdb_module_features_rpl { + u8 resv1[CMIS_CDB_MODULE_FEATURES_RESV_DATA]; + __be16 max_completion_time; +}; + +static u16 +cmis_cdb_module_features_completion_time(struct cmis_cdb_module_features_rpl *rpl) +{ + return be16_to_cpu(rpl->max_completion_time); +} + +static int cmis_cdb_module_features_get(struct ethtool_cmis_cdb *cdb, + struct net_device *dev, + struct ethnl_module_fw_flash_ntf_params *ntf_params) +{ + struct ethtool_cmis_cdb_cmd_args args = {}; + struct cmis_cdb_module_features_rpl *rpl; + u8 flags = CDB_F_STATUS_VALID; + int err; + + ethtool_cmis_cdb_check_completion_flag(cdb->cmis_rev, &flags); + ethtool_cmis_cdb_compose_args(&args, + ETHTOOL_CMIS_CDB_CMD_MODULE_FEATURES, + NULL, 0, 0, cdb->read_write_len_ext, + 1000, sizeof(*rpl), flags); + + err = ethtool_cmis_cdb_execute_cmd(dev, &args); + if (err < 0) { + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "Module Features command failed", + args.err_msg); + return err; + } + + rpl = (struct cmis_cdb_module_features_rpl *)args.req.payload; + cdb->max_completion_time = + cmis_cdb_module_features_completion_time(rpl); + + return 0; +} + +struct ethtool_cmis_cdb * +ethtool_cmis_cdb_init(struct net_device *dev, + const struct ethtool_module_fw_flash_params *params, + struct ethnl_module_fw_flash_ntf_params *ntf_params) +{ + struct ethtool_cmis_cdb *cdb; + int err; + + cdb = kzalloc(sizeof(*cdb), GFP_KERNEL); + if (!cdb) + return ERR_PTR(-ENOMEM); + + err = cmis_rev_major_get(dev, &cdb->cmis_rev); + if (err < 0) + goto err; + + if (cdb->cmis_rev < 4) { + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "CMIS revision doesn't support module firmware flashing", + NULL); + err = -EOPNOTSUPP; + goto err; + } + + err = cmis_cdb_advertisement_get(cdb, dev); + if (err < 0) + goto err; + + if (params->password_valid) { + err = cmis_cdb_validate_password(cdb, dev, params, ntf_params); + if (err < 0) + goto err; + } + + err = cmis_cdb_module_features_get(cdb, dev, ntf_params); + if (err < 0) + goto err; + + return cdb; + +err: + ethtool_cmis_cdb_fini(cdb); + return ERR_PTR(err); +} + +void ethtool_cmis_cdb_fini(struct ethtool_cmis_cdb *cdb) +{ + kfree(cdb); +} + +static bool is_completed(u8 data) +{ + return !!(data & 0x40); +} + +#define CMIS_CDB_STATUS_SUCCESS 0x01 + +static bool status_success(u8 data) +{ + return data == CMIS_CDB_STATUS_SUCCESS; +} + +#define CMIS_CDB_STATUS_FAIL 0x40 + +static bool status_fail(u8 data) +{ + return data & CMIS_CDB_STATUS_FAIL; +} + +struct cmis_wait_for_cond_rpl { + u8 state; +}; + +static int +ethtool_cmis_module_poll(struct net_device *dev, + struct cmis_wait_for_cond_rpl *rpl, u32 offset, + bool (*cond_success)(u8), bool (*cond_fail)(u8)) +{ + const struct ethtool_ops *ops = dev->ethtool_ops; + struct ethtool_module_eeprom page_data = {0}; + struct netlink_ext_ack extack = {}; + int err; + + ethtool_cmis_page_init(&page_data, 0, offset, sizeof(rpl)); + page_data.data = (u8 *)rpl; + + err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); + if (err < 0) { + if (extack._msg) + netdev_err_once(dev, "%s\n", extack._msg); + return -EBUSY; + } + + if ((*cond_success)(rpl->state)) + return 0; + + if (*cond_fail && (*cond_fail)(rpl->state)) + return -EIO; + + return -EBUSY; +} + +int ethtool_cmis_wait_for_cond(struct net_device *dev, u8 flags, u8 flag, + u16 max_duration, u32 offset, + bool (*cond_success)(u8), bool (*cond_fail)(u8), + u8 *state) +{ + struct cmis_wait_for_cond_rpl rpl = {}; + unsigned long end; + int err; + + if (!(flags & flag)) + return 0; + + if (max_duration == 0) + max_duration = U16_MAX; + + end = jiffies + msecs_to_jiffies(max_duration); + do { + err = ethtool_cmis_module_poll(dev, &rpl, offset, cond_success, + cond_fail); + if (err != -EBUSY) + goto out; + + msleep(20); + } while (time_before(jiffies, end)); + + err = ethtool_cmis_module_poll(dev, &rpl, offset, cond_success, + cond_fail); + if (err == -EBUSY) + err = -ETIMEDOUT; + +out: + *state = rpl.state; + return err; +} + +#define CMIS_CDB_COMPLETION_FLAG_OFFSET 0x08 + +static int cmis_cdb_wait_for_completion(struct net_device *dev, + struct ethtool_cmis_cdb_cmd_args *args) +{ + u8 flag; + int err; + + /* Some vendors demand waiting time before checking completion flag + * in some CDB commands. + */ + msleep(args->msleep_pre_rpl); + + err = ethtool_cmis_wait_for_cond(dev, args->flags, + CDB_F_COMPLETION_VALID, + args->max_duration, + CMIS_CDB_COMPLETION_FLAG_OFFSET, + is_completed, NULL, &flag); + if (err < 0) + args->err_msg = "Completion Flag did not set on time"; + + return err; +} + +#define CMIS_CDB_STATUS_OFFSET 0x25 + +static void cmis_cdb_status_fail_msg_get(u8 status, char **err_msg) +{ + switch (status) { + case 0b10000001: + *err_msg = "CDB Status is in progress: Busy capturing command"; + break; + case 0b10000010: + *err_msg = + "CDB Status is in progress: Busy checking/validating command"; + break; + case 0b10000011: + *err_msg = "CDB Status is in progress: Busy executing"; + break; + case 0b01000000: + *err_msg = "CDB status failed: no specific failure"; + break; + case 0b01000010: + *err_msg = + "CDB status failed: Parameter range error or parameter not supported"; + break; + case 0b01000101: + *err_msg = "CDB status failed: CdbChkCode error"; + break; + default: + *err_msg = "Unknown failure reason"; + } +}; + +static int cmis_cdb_wait_for_status(struct net_device *dev, + struct ethtool_cmis_cdb_cmd_args *args) +{ + u8 status; + int err; + + /* Some vendors demand waiting time before checking status in some + * CDB commands. + */ + msleep(args->msleep_pre_rpl); + + err = ethtool_cmis_wait_for_cond(dev, args->flags, CDB_F_STATUS_VALID, + args->max_duration, + CMIS_CDB_STATUS_OFFSET, + status_success, status_fail, &status); + if (err < 0 && !args->err_msg) + cmis_cdb_status_fail_msg_get(status, &args->err_msg); + + return err; +} + +#define CMIS_CDB_REPLY_OFFSET 0x86 + +static int cmis_cdb_process_reply(struct net_device *dev, + struct ethtool_module_eeprom *page_data, + struct ethtool_cmis_cdb_cmd_args *args) +{ + u8 rpl_hdr_len = sizeof(struct ethtool_cmis_cdb_rpl_hdr); + u8 rpl_exp_len = args->rpl_exp_len + rpl_hdr_len; + const struct ethtool_ops *ops = dev->ethtool_ops; + struct netlink_ext_ack extack = {}; + struct ethtool_cmis_cdb_rpl *rpl; + int err; + + if (!args->rpl_exp_len) + return 0; + + ethtool_cmis_page_init(page_data, ETHTOOL_CMIS_CDB_CMD_PAGE, + CMIS_CDB_REPLY_OFFSET, rpl_exp_len); + page_data->data = kmalloc(page_data->length, GFP_KERNEL); + if (!page_data->data) + return -ENOMEM; + + err = ops->get_module_eeprom_by_page(dev, page_data, &extack); + if (err < 0) { + if (extack._msg) + netdev_err(dev, "%s\n", extack._msg); + goto out; + } + + rpl = (struct ethtool_cmis_cdb_rpl *)page_data->data; + if ((args->rpl_exp_len > rpl->hdr.rpl_len + rpl_hdr_len) || + !rpl->hdr.rpl_chk_code) { + err = -EIO; + goto out; + } + + args->req.lpl_len = rpl->hdr.rpl_len; + memcpy(args->req.payload, rpl->payload, args->req.lpl_len); + +out: + kfree(page_data->data); + return err; +} + +static int +__ethtool_cmis_cdb_execute_cmd(struct net_device *dev, + struct ethtool_module_eeprom *page_data, + u8 page, u32 offset, u32 length, void *data) +{ + const struct ethtool_ops *ops = dev->ethtool_ops; + struct netlink_ext_ack extack = {}; + int err; + + ethtool_cmis_page_init(page_data, page, offset, length); + page_data->data = kmemdup(data, page_data->length, GFP_KERNEL); + if (!page_data->data) + return -ENOMEM; + + err = ops->set_module_eeprom_by_page(dev, page_data, &extack); + if (err < 0) { + if (extack._msg) + netdev_err(dev, "%s\n", extack._msg); + } + + kfree(page_data->data); + return err; +} + +static u8 cmis_cdb_calc_checksum(const void *data, size_t size) +{ + const u8 *bytes = (const u8 *)data; + u8 checksum = 0; + + for (size_t i = 0; i < size; i++) + checksum += bytes[i]; + + return ~checksum; +} + +#define CMIS_CDB_CMD_ID_OFFSET 0x80 + +int ethtool_cmis_cdb_execute_cmd(struct net_device *dev, + struct ethtool_cmis_cdb_cmd_args *args) +{ + struct ethtool_module_eeprom page_data = {}; + u32 offset; + int err; + + args->req.chk_code = + cmis_cdb_calc_checksum(&args->req, sizeof(args->req)); + + if (args->req.lpl_len > args->read_write_len_ext) { + args->err_msg = "LPL length is longer than CDB read write length extension allows"; + return -EINVAL; + } + + /* According to the CMIS standard, there are two options to trigger the + * CDB commands. The default option is triggering the command by writing + * the CMDID bytes. Therefore, the command will be split to 2 calls: + * First, with everything except the CMDID field and then the CMDID + * field. + */ + offset = CMIS_CDB_CMD_ID_OFFSET + + offsetof(struct ethtool_cmis_cdb_request, body); + err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data, + ETHTOOL_CMIS_CDB_CMD_PAGE, offset, + sizeof(args->req.body), + &args->req.body); + if (err < 0) + return err; + + offset = CMIS_CDB_CMD_ID_OFFSET + + offsetof(struct ethtool_cmis_cdb_request, id); + err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data, + ETHTOOL_CMIS_CDB_CMD_PAGE, offset, + sizeof(args->req.id), + &args->req.id); + if (err < 0) + return err; + + err = cmis_cdb_wait_for_completion(dev, args); + if (err < 0) + return err; + + err = cmis_cdb_wait_for_status(dev, args); + if (err < 0) + return err; + + return cmis_cdb_process_reply(dev, &page_data, args); +} diff --git a/net/ethtool/module_fw.h b/net/ethtool/module_fw.h index ee4a291ac1d4..6c86d05ab6cf 100644 --- a/net/ethtool/module_fw.h +++ b/net/ethtool/module_fw.h @@ -15,6 +15,16 @@ struct ethnl_module_fw_flash_ntf_params { bool closed_sock; }; +/** + * struct ethtool_module_fw_flash_params - module firmware flashing parameters + * @password: Module password. Only valid when @pass_valid is set. + * @password_valid: Whether the module password is valid or not. + */ +struct ethtool_module_fw_flash_params { + __be32 password; + u8 password_valid:1; +}; + void ethnl_module_fw_flash_ntf_err(struct net_device *dev, struct ethnl_module_fw_flash_ntf_params *params, -- cgit v1.2.3-58-ga151 From c4f78134d45c9619339c96b4bea380b1d0699788 Mon Sep 17 00:00:00 2001 From: Danielle Ratson Date: Thu, 27 Jun 2024 17:08:55 +0300 Subject: ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB According to the CMIS standard, the firmware update process is done using a CDB commands sequence. Implement a work that will be triggered from the module layer in the next patch the will initiate and execute all the CDB commands in order, to eventually complete the firmware update process. This flashing process includes, writing the firmware image, running the new firmware image and committing it after testing, so that it will run upon reset. This work will also notify user space about the progress of the firmware update process. Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: David S. Miller --- net/ethtool/Makefile | 2 +- net/ethtool/cmis.h | 7 + net/ethtool/cmis_fw_update.c | 399 +++++++++++++++++++++++++++++++++++++++++++ net/ethtool/module_fw.h | 31 ++++ 4 files changed, 438 insertions(+), 1 deletion(-) create mode 100644 net/ethtool/cmis_fw_update.c (limited to 'net/ethtool/module_fw.h') diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile index 38806b3ecf83..9a190635fe95 100644 --- a/net/ethtool/Makefile +++ b/net/ethtool/Makefile @@ -8,4 +8,4 @@ ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o linkmodes.o rss.o \ linkstate.o debug.o wol.o features.o privflags.o rings.o \ channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \ tunnels.o fec.o eeprom.o stats.o phc_vclocks.o mm.o \ - module.o cmis_cdb.o pse-pd.o plca.o mm.o + module.o cmis_fw_update.o cmis_cdb.o pse-pd.o plca.o mm.o diff --git a/net/ethtool/cmis.h b/net/ethtool/cmis.h index 295f5d0df915..e71cc3e1b7eb 100644 --- a/net/ethtool/cmis.h +++ b/net/ethtool/cmis.h @@ -20,6 +20,12 @@ struct ethtool_cmis_cdb { enum ethtool_cmis_cdb_cmd_id { ETHTOOL_CMIS_CDB_CMD_QUERY_STATUS = 0x0000, ETHTOOL_CMIS_CDB_CMD_MODULE_FEATURES = 0x0040, + ETHTOOL_CMIS_CDB_CMD_FW_MANAGMENT_FEATURES = 0x0041, + ETHTOOL_CMIS_CDB_CMD_START_FW_DOWNLOAD = 0x0101, + ETHTOOL_CMIS_CDB_CMD_WRITE_FW_BLOCK_LPL = 0x0103, + ETHTOOL_CMIS_CDB_CMD_COMPLETE_FW_DOWNLOAD = 0x0107, + ETHTOOL_CMIS_CDB_CMD_RUN_FW_IMAGE = 0x0109, + ETHTOOL_CMIS_CDB_CMD_COMMIT_FW_IMAGE = 0x010A, }; /** @@ -47,6 +53,7 @@ struct ethtool_cmis_cdb_request { #define CDB_F_COMPLETION_VALID BIT(0) #define CDB_F_STATUS_VALID BIT(1) +#define CDB_F_MODULE_STATE_VALID BIT(2) /** * struct ethtool_cmis_cdb_cmd_args - CDB commands execution arguments diff --git a/net/ethtool/cmis_fw_update.c b/net/ethtool/cmis_fw_update.c new file mode 100644 index 000000000000..ae4b4b28a601 --- /dev/null +++ b/net/ethtool/cmis_fw_update.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include + +#include "common.h" +#include "module_fw.h" +#include "cmis.h" + +struct cmis_fw_update_fw_mng_features { + u8 start_cmd_payload_size; + u16 max_duration_start; + u16 max_duration_write; + u16 max_duration_complete; +}; + +/* See section 9.4.2 "CMD 0041h: Firmware Management Features" in CMIS standard + * revision 5.2. + * struct cmis_cdb_fw_mng_features_rpl is a structured layout of the flat + * array, ethtool_cmis_cdb_rpl::payload. + */ +struct cmis_cdb_fw_mng_features_rpl { + u8 resv1; + u8 resv2; + u8 start_cmd_payload_size; + u8 resv3; + u8 read_write_len_ext; + u8 write_mechanism; + u8 resv4; + u8 resv5; + __be16 max_duration_start; + __be16 resv6; + __be16 max_duration_write; + __be16 max_duration_complete; + __be16 resv7; +}; + +#define CMIS_CDB_FW_WRITE_MECHANISM_LPL 0x01 + +static int +cmis_fw_update_fw_mng_features_get(struct ethtool_cmis_cdb *cdb, + struct net_device *dev, + struct cmis_fw_update_fw_mng_features *fw_mng, + struct ethnl_module_fw_flash_ntf_params *ntf_params) +{ + struct ethtool_cmis_cdb_cmd_args args = {}; + struct cmis_cdb_fw_mng_features_rpl *rpl; + u8 flags = CDB_F_STATUS_VALID; + int err; + + ethtool_cmis_cdb_check_completion_flag(cdb->cmis_rev, &flags); + ethtool_cmis_cdb_compose_args(&args, + ETHTOOL_CMIS_CDB_CMD_FW_MANAGMENT_FEATURES, + NULL, 0, cdb->max_completion_time, + cdb->read_write_len_ext, 1000, + sizeof(*rpl), flags); + + err = ethtool_cmis_cdb_execute_cmd(dev, &args); + if (err < 0) { + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "FW Management Features command failed", + args.err_msg); + return err; + } + + rpl = (struct cmis_cdb_fw_mng_features_rpl *)args.req.payload; + if (!(rpl->write_mechanism == CMIS_CDB_FW_WRITE_MECHANISM_LPL)) { + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "Write LPL is not supported", + NULL); + return -EOPNOTSUPP; + } + + /* Above, we used read_write_len_ext that we got from CDB + * advertisement. Update it with the value that we got from module + * features query, which is specific for Firmware Management Commands + * (IDs 0100h-01FFh). + */ + cdb->read_write_len_ext = rpl->read_write_len_ext; + fw_mng->start_cmd_payload_size = rpl->start_cmd_payload_size; + fw_mng->max_duration_start = be16_to_cpu(rpl->max_duration_start); + fw_mng->max_duration_write = be16_to_cpu(rpl->max_duration_write); + fw_mng->max_duration_complete = be16_to_cpu(rpl->max_duration_complete); + + return 0; +} + +/* See section 9.7.2 "CMD 0101h: Start Firmware Download" in CMIS standard + * revision 5.2. + * struct cmis_cdb_start_fw_download_pl is a structured layout of the + * flat array, ethtool_cmis_cdb_request::payload. + */ +struct cmis_cdb_start_fw_download_pl { + __struct_group(cmis_cdb_start_fw_download_pl_h, head, /* no attrs */, + __be32 image_size; + __be32 resv1; + ); + u8 vendor_data[ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - + sizeof(struct cmis_cdb_start_fw_download_pl_h)]; +}; + +static int +cmis_fw_update_start_download(struct ethtool_cmis_cdb *cdb, + struct ethtool_cmis_fw_update_params *fw_update, + struct cmis_fw_update_fw_mng_features *fw_mng) +{ + u8 vendor_data_size = fw_mng->start_cmd_payload_size; + struct cmis_cdb_start_fw_download_pl pl = {}; + struct ethtool_cmis_cdb_cmd_args args = {}; + u8 lpl_len; + int err; + + pl.image_size = cpu_to_be32(fw_update->fw->size); + memcpy(pl.vendor_data, fw_update->fw->data, vendor_data_size); + + lpl_len = offsetof(struct cmis_cdb_start_fw_download_pl, + vendor_data[vendor_data_size]); + + ethtool_cmis_cdb_compose_args(&args, + ETHTOOL_CMIS_CDB_CMD_START_FW_DOWNLOAD, + (u8 *)&pl, lpl_len, + fw_mng->max_duration_start, + cdb->read_write_len_ext, 1000, 0, + CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID); + + err = ethtool_cmis_cdb_execute_cmd(fw_update->dev, &args); + if (err < 0) + ethnl_module_fw_flash_ntf_err(fw_update->dev, + &fw_update->ntf_params, + "Start FW download command failed", + args.err_msg); + + return err; +} + +/* See section 9.7.4 "CMD 0103h: Write Firmware Block LPL" in CMIS standard + * revision 5.2. + * struct cmis_cdb_write_fw_block_lpl_pl is a structured layout of the + * flat array, ethtool_cmis_cdb_request::payload. + */ +struct cmis_cdb_write_fw_block_lpl_pl { + __be32 block_address; + u8 fw_block[ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - sizeof(__be32)]; +}; + +static int +cmis_fw_update_write_image(struct ethtool_cmis_cdb *cdb, + struct ethtool_cmis_fw_update_params *fw_update, + struct cmis_fw_update_fw_mng_features *fw_mng) +{ + u8 start = fw_mng->start_cmd_payload_size; + u32 offset, max_block_size, max_lpl_len; + u32 image_size = fw_update->fw->size; + int err; + + max_lpl_len = min_t(u32, + ethtool_cmis_get_max_payload_size(cdb->read_write_len_ext), + ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH); + max_block_size = + max_lpl_len - sizeof_field(struct cmis_cdb_write_fw_block_lpl_pl, + block_address); + + for (offset = start; offset < image_size; offset += max_block_size) { + struct cmis_cdb_write_fw_block_lpl_pl pl = { + .block_address = cpu_to_be32(offset - start), + }; + struct ethtool_cmis_cdb_cmd_args args = {}; + u32 block_size, lpl_len; + + ethnl_module_fw_flash_ntf_in_progress(fw_update->dev, + &fw_update->ntf_params, + offset - start, + image_size); + block_size = min_t(u32, max_block_size, image_size - offset); + memcpy(pl.fw_block, &fw_update->fw->data[offset], block_size); + lpl_len = block_size + + sizeof_field(struct cmis_cdb_write_fw_block_lpl_pl, + block_address); + + ethtool_cmis_cdb_compose_args(&args, + ETHTOOL_CMIS_CDB_CMD_WRITE_FW_BLOCK_LPL, + (u8 *)&pl, lpl_len, + fw_mng->max_duration_write, + cdb->read_write_len_ext, 1, 0, + CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID); + + err = ethtool_cmis_cdb_execute_cmd(fw_update->dev, &args); + if (err < 0) { + ethnl_module_fw_flash_ntf_err(fw_update->dev, + &fw_update->ntf_params, + "Write FW block LPL command failed", + args.err_msg); + return err; + } + } + + return 0; +} + +static int +cmis_fw_update_complete_download(struct ethtool_cmis_cdb *cdb, + struct net_device *dev, + struct cmis_fw_update_fw_mng_features *fw_mng, + struct ethnl_module_fw_flash_ntf_params *ntf_params) +{ + struct ethtool_cmis_cdb_cmd_args args = {}; + int err; + + ethtool_cmis_cdb_compose_args(&args, + ETHTOOL_CMIS_CDB_CMD_COMPLETE_FW_DOWNLOAD, + NULL, 0, fw_mng->max_duration_complete, + cdb->read_write_len_ext, 1000, 0, + CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID); + + err = ethtool_cmis_cdb_execute_cmd(dev, &args); + if (err < 0) + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "Complete FW download command failed", + args.err_msg); + + return err; +} + +static int +cmis_fw_update_download_image(struct ethtool_cmis_cdb *cdb, + struct ethtool_cmis_fw_update_params *fw_update, + struct cmis_fw_update_fw_mng_features *fw_mng) +{ + int err; + + err = cmis_fw_update_start_download(cdb, fw_update, fw_mng); + if (err < 0) + return err; + + err = cmis_fw_update_write_image(cdb, fw_update, fw_mng); + if (err < 0) + return err; + + err = cmis_fw_update_complete_download(cdb, fw_update->dev, fw_mng, + &fw_update->ntf_params); + if (err < 0) + return err; + + return 0; +} + +enum { + CMIS_MODULE_LOW_PWR = 1, + CMIS_MODULE_READY = 3, +}; + +static bool module_is_ready(u8 data) +{ + u8 state = (data >> 1) & 7; + + return state == CMIS_MODULE_READY || state == CMIS_MODULE_LOW_PWR; +} + +#define CMIS_MODULE_READY_MAX_DURATION_MSEC 1000 +#define CMIS_MODULE_STATE_OFFSET 3 + +static int +cmis_fw_update_wait_for_module_state(struct net_device *dev, u8 flags) +{ + u8 state; + + return ethtool_cmis_wait_for_cond(dev, flags, CDB_F_MODULE_STATE_VALID, + CMIS_MODULE_READY_MAX_DURATION_MSEC, + CMIS_MODULE_STATE_OFFSET, + module_is_ready, NULL, &state); +} + +/* See section 9.7.10 "CMD 0109h: Run Firmware Image" in CMIS standard + * revision 5.2. + * struct cmis_cdb_run_fw_image_pl is a structured layout of the flat + * array, ethtool_cmis_cdb_request::payload. + */ +struct cmis_cdb_run_fw_image_pl { + u8 resv1; + u8 image_to_run; + u16 delay_to_reset; +}; + +static int +cmis_fw_update_run_image(struct ethtool_cmis_cdb *cdb, struct net_device *dev, + struct ethnl_module_fw_flash_ntf_params *ntf_params) +{ + struct ethtool_cmis_cdb_cmd_args args = {}; + struct cmis_cdb_run_fw_image_pl pl = {0}; + int err; + + ethtool_cmis_cdb_compose_args(&args, ETHTOOL_CMIS_CDB_CMD_RUN_FW_IMAGE, + (u8 *)&pl, sizeof(pl), + cdb->max_completion_time, + cdb->read_write_len_ext, 1000, 0, + CDB_F_MODULE_STATE_VALID); + + err = ethtool_cmis_cdb_execute_cmd(dev, &args); + if (err < 0) { + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "Run image command failed", + args.err_msg); + return err; + } + + err = cmis_fw_update_wait_for_module_state(dev, args.flags); + if (err < 0) + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "Module is not ready on time after reset", + NULL); + + return err; +} + +static int +cmis_fw_update_commit_image(struct ethtool_cmis_cdb *cdb, + struct net_device *dev, + struct ethnl_module_fw_flash_ntf_params *ntf_params) +{ + struct ethtool_cmis_cdb_cmd_args args = {}; + int err; + + ethtool_cmis_cdb_compose_args(&args, + ETHTOOL_CMIS_CDB_CMD_COMMIT_FW_IMAGE, + NULL, 0, cdb->max_completion_time, + cdb->read_write_len_ext, 1000, 0, + CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID); + + err = ethtool_cmis_cdb_execute_cmd(dev, &args); + if (err < 0) + ethnl_module_fw_flash_ntf_err(dev, ntf_params, + "Commit image command failed", + args.err_msg); + + return err; +} + +static int cmis_fw_update_reset(struct net_device *dev) +{ + __u32 reset_data = ETH_RESET_PHY; + + return dev->ethtool_ops->reset(dev, &reset_data); +} + +void +ethtool_cmis_fw_update(struct ethtool_cmis_fw_update_params *fw_update) +{ + struct ethnl_module_fw_flash_ntf_params *ntf_params = + &fw_update->ntf_params; + struct cmis_fw_update_fw_mng_features fw_mng = {0}; + struct net_device *dev = fw_update->dev; + struct ethtool_cmis_cdb *cdb; + int err; + + cdb = ethtool_cmis_cdb_init(dev, &fw_update->params, ntf_params); + if (IS_ERR(cdb)) + goto err_send_ntf; + + ethnl_module_fw_flash_ntf_start(dev, ntf_params); + + err = cmis_fw_update_fw_mng_features_get(cdb, dev, &fw_mng, ntf_params); + if (err < 0) + goto err_cdb_fini; + + err = cmis_fw_update_download_image(cdb, fw_update, &fw_mng); + if (err < 0) + goto err_cdb_fini; + + err = cmis_fw_update_run_image(cdb, dev, ntf_params); + if (err < 0) + goto err_cdb_fini; + + /* The CDB command "Run Firmware Image" resets the firmware, so the new + * one might have different settings. + * Free the old CDB instance, and init a new one. + */ + ethtool_cmis_cdb_fini(cdb); + + cdb = ethtool_cmis_cdb_init(dev, &fw_update->params, ntf_params); + if (IS_ERR(cdb)) + goto err_send_ntf; + + err = cmis_fw_update_commit_image(cdb, dev, ntf_params); + if (err < 0) + goto err_cdb_fini; + + err = cmis_fw_update_reset(dev); + if (err < 0) + goto err_cdb_fini; + + ethnl_module_fw_flash_ntf_complete(dev, ntf_params); + ethtool_cmis_cdb_fini(cdb); + return; + +err_cdb_fini: + ethtool_cmis_cdb_fini(cdb); +err_send_ntf: + ethnl_module_fw_flash_ntf_err(dev, ntf_params, NULL, NULL); +} diff --git a/net/ethtool/module_fw.h b/net/ethtool/module_fw.h index 6c86d05ab6cf..d0fc2529b60e 100644 --- a/net/ethtool/module_fw.h +++ b/net/ethtool/module_fw.h @@ -25,6 +25,35 @@ struct ethtool_module_fw_flash_params { u8 password_valid:1; }; +/** + * struct ethtool_cmis_fw_update_params - CMIS firmware update specific + * parameters + * @dev: Pointer to the net_device to be flashed. + * @params: Module firmware flashing parameters. + * @ntf_params: Module firmware flashing notification parameters. + * @fw: Firmware to flash. + */ +struct ethtool_cmis_fw_update_params { + struct net_device *dev; + struct ethtool_module_fw_flash_params params; + struct ethnl_module_fw_flash_ntf_params ntf_params; + const struct firmware *fw; +}; + +/** + * struct ethtool_module_fw_flash - module firmware flashing + * @list: List node for &module_fw_flash_work_list. + * @dev_tracker: Refcount tracker for @dev. + * @work: The flashing firmware work. + * @fw_update: CMIS firmware update specific parameters. + */ +struct ethtool_module_fw_flash { + struct list_head list; + netdevice_tracker dev_tracker; + struct work_struct work; + struct ethtool_cmis_fw_update_params fw_update; +}; + void ethnl_module_fw_flash_ntf_err(struct net_device *dev, struct ethnl_module_fw_flash_ntf_params *params, @@ -39,3 +68,5 @@ void ethnl_module_fw_flash_ntf_in_progress(struct net_device *dev, struct ethnl_module_fw_flash_ntf_params *params, u64 done, u64 total); + +void ethtool_cmis_fw_update(struct ethtool_cmis_fw_update_params *params); -- cgit v1.2.3-58-ga151 From 32b4c8b53ee7799e34a2b1634d32d3ce1e36c44e Mon Sep 17 00:00:00 2001 From: Danielle Ratson Date: Thu, 27 Jun 2024 17:08:56 +0300 Subject: ethtool: Add ability to flash transceiver modules' firmware Add the ability to flash the modules' firmware by implementing the interface between the user space and the kernel. Example from a succeeding implementation: # ethtool --flash-module-firmware swp40 file test.bin Transceiver module firmware flashing started for device swp40 Transceiver module firmware flashing in progress for device swp40 Progress: 99% Transceiver module firmware flashing completed for device swp40 In addition, add infrastructure that allows modules to set socket-specific private data. This ensures that when a socket is closed from user space during the flashing process, the right socket halts sending notifications to user space until the work item is completed. Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: David S. Miller --- net/ethtool/module.c | 277 ++++++++++++++++++++++++++++++++++++++++++++++++ net/ethtool/module_fw.h | 3 + net/ethtool/netlink.c | 39 +++++++ net/ethtool/netlink.h | 15 +++ 4 files changed, 334 insertions(+) (limited to 'net/ethtool/module_fw.h') diff --git a/net/ethtool/module.c b/net/ethtool/module.c index ba728b4a38a1..6b7448df08d5 100644 --- a/net/ethtool/module.c +++ b/net/ethtool/module.c @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only #include +#include +#include +#include #include "netlink.h" #include "common.h" @@ -34,6 +37,12 @@ static int module_get_power_mode(struct net_device *dev, if (!ops->get_module_power_mode) return 0; + if (dev->module_fw_flash_in_progress) { + NL_SET_ERR_MSG(extack, + "Module firmware flashing is in progress"); + return -EBUSY; + } + return ops->get_module_power_mode(dev, &data->power, extack); } @@ -110,6 +119,12 @@ ethnl_set_module_validate(struct ethnl_req_info *req_info, if (!tb[ETHTOOL_A_MODULE_POWER_MODE_POLICY]) return 0; + if (req_info->dev->module_fw_flash_in_progress) { + NL_SET_ERR_MSG(info->extack, + "Module firmware flashing is in progress"); + return -EBUSY; + } + if (!ops->get_module_power_mode || !ops->set_module_power_mode) { NL_SET_ERR_MSG_ATTR(info->extack, tb[ETHTOOL_A_MODULE_POWER_MODE_POLICY], @@ -160,6 +175,268 @@ const struct ethnl_request_ops ethnl_module_request_ops = { .set_ntf_cmd = ETHTOOL_MSG_MODULE_NTF, }; +/* MODULE_FW_FLASH_ACT */ + +const struct nla_policy +ethnl_module_fw_flash_act_policy[ETHTOOL_A_MODULE_FW_FLASH_PASSWORD + 1] = { + [ETHTOOL_A_MODULE_FW_FLASH_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy), + [ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME] = { .type = NLA_NUL_STRING }, + [ETHTOOL_A_MODULE_FW_FLASH_PASSWORD] = { .type = NLA_U32 }, +}; + +static LIST_HEAD(module_fw_flash_work_list); +static DEFINE_SPINLOCK(module_fw_flash_work_list_lock); + +static int +module_flash_fw_work_list_add(struct ethtool_module_fw_flash *module_fw, + struct genl_info *info) +{ + struct ethtool_module_fw_flash *work; + + /* First, check if already registered. */ + spin_lock(&module_fw_flash_work_list_lock); + list_for_each_entry(work, &module_fw_flash_work_list, list) { + if (work->fw_update.ntf_params.portid == info->snd_portid && + work->fw_update.dev == module_fw->fw_update.dev) { + spin_unlock(&module_fw_flash_work_list_lock); + return -EALREADY; + } + } + + list_add_tail(&module_fw->list, &module_fw_flash_work_list); + spin_unlock(&module_fw_flash_work_list_lock); + + return 0; +} + +static void module_flash_fw_work_list_del(struct list_head *list) +{ + spin_lock(&module_fw_flash_work_list_lock); + list_del(list); + spin_unlock(&module_fw_flash_work_list_lock); +} + +static void module_flash_fw_work(struct work_struct *work) +{ + struct ethtool_module_fw_flash *module_fw; + + module_fw = container_of(work, struct ethtool_module_fw_flash, work); + + ethtool_cmis_fw_update(&module_fw->fw_update); + + module_flash_fw_work_list_del(&module_fw->list); + module_fw->fw_update.dev->module_fw_flash_in_progress = false; + netdev_put(module_fw->fw_update.dev, &module_fw->dev_tracker); + release_firmware(module_fw->fw_update.fw); + kfree(module_fw); +} + +#define MODULE_EEPROM_PHYS_ID_PAGE 0 +#define MODULE_EEPROM_PHYS_ID_I2C_ADDR 0x50 + +static int module_flash_fw_work_init(struct ethtool_module_fw_flash *module_fw, + struct net_device *dev, + struct netlink_ext_ack *extack) +{ + const struct ethtool_ops *ops = dev->ethtool_ops; + struct ethtool_module_eeprom page_data = {}; + u8 phys_id; + int err; + + /* Fetch the SFF-8024 Identifier Value. For all supported standards, it + * is located at I2C address 0x50, byte 0. See section 4.1 in SFF-8024, + * revision 4.9. + */ + page_data.page = MODULE_EEPROM_PHYS_ID_PAGE; + page_data.offset = SFP_PHYS_ID; + page_data.length = sizeof(phys_id); + page_data.i2c_address = MODULE_EEPROM_PHYS_ID_I2C_ADDR; + page_data.data = &phys_id; + + err = ops->get_module_eeprom_by_page(dev, &page_data, extack); + if (err < 0) + return err; + + switch (phys_id) { + case SFF8024_ID_QSFP_DD: + case SFF8024_ID_OSFP: + case SFF8024_ID_DSFP: + case SFF8024_ID_QSFP_PLUS_CMIS: + case SFF8024_ID_SFP_DD_CMIS: + case SFF8024_ID_SFP_PLUS_CMIS: + INIT_WORK(&module_fw->work, module_flash_fw_work); + break; + default: + NL_SET_ERR_MSG(extack, + "Module type does not support firmware flashing"); + return -EOPNOTSUPP; + } + + return 0; +} + +void ethnl_module_fw_flash_sock_destroy(struct ethnl_sock_priv *sk_priv) +{ + struct ethtool_module_fw_flash *work; + + spin_lock(&module_fw_flash_work_list_lock); + list_for_each_entry(work, &module_fw_flash_work_list, list) { + if (work->fw_update.dev == sk_priv->dev && + work->fw_update.ntf_params.portid == sk_priv->portid) { + work->fw_update.ntf_params.closed_sock = true; + break; + } + } + spin_unlock(&module_fw_flash_work_list_lock); +} + +static int +module_flash_fw_schedule(struct net_device *dev, const char *file_name, + struct ethtool_module_fw_flash_params *params, + struct sk_buff *skb, struct genl_info *info) +{ + struct ethtool_cmis_fw_update_params *fw_update; + struct ethtool_module_fw_flash *module_fw; + int err; + + module_fw = kzalloc(sizeof(*module_fw), GFP_KERNEL); + if (!module_fw) + return -ENOMEM; + + fw_update = &module_fw->fw_update; + fw_update->params = *params; + err = request_firmware_direct(&fw_update->fw, + file_name, &dev->dev); + if (err) { + NL_SET_ERR_MSG(info->extack, + "Failed to request module firmware image"); + goto err_free; + } + + err = module_flash_fw_work_init(module_fw, dev, info->extack); + if (err < 0) + goto err_release_firmware; + + dev->module_fw_flash_in_progress = true; + netdev_hold(dev, &module_fw->dev_tracker, GFP_KERNEL); + fw_update->dev = dev; + fw_update->ntf_params.portid = info->snd_portid; + fw_update->ntf_params.seq = info->snd_seq; + fw_update->ntf_params.closed_sock = false; + + err = ethnl_sock_priv_set(skb, dev, fw_update->ntf_params.portid, + ETHTOOL_SOCK_TYPE_MODULE_FW_FLASH); + if (err < 0) + goto err_release_firmware; + + err = module_flash_fw_work_list_add(module_fw, info); + if (err < 0) + goto err_release_firmware; + + schedule_work(&module_fw->work); + + return 0; + +err_release_firmware: + release_firmware(fw_update->fw); +err_free: + kfree(module_fw); + return err; +} + +static int module_flash_fw(struct net_device *dev, struct nlattr **tb, + struct sk_buff *skb, struct genl_info *info) +{ + struct ethtool_module_fw_flash_params params = {}; + const char *file_name; + struct nlattr *attr; + + if (GENL_REQ_ATTR_CHECK(info, ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME)) + return -EINVAL; + + file_name = nla_data(tb[ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME]); + + attr = tb[ETHTOOL_A_MODULE_FW_FLASH_PASSWORD]; + if (attr) { + params.password = cpu_to_be32(nla_get_u32(attr)); + params.password_valid = true; + } + + return module_flash_fw_schedule(dev, file_name, ¶ms, skb, info); +} + +static int ethnl_module_fw_flash_validate(struct net_device *dev, + struct netlink_ext_ack *extack) +{ + struct devlink_port *devlink_port = dev->devlink_port; + const struct ethtool_ops *ops = dev->ethtool_ops; + + if (!ops->set_module_eeprom_by_page || + !ops->get_module_eeprom_by_page) { + NL_SET_ERR_MSG(extack, + "Flashing module firmware is not supported by this device"); + return -EOPNOTSUPP; + } + + if (!ops->reset) { + NL_SET_ERR_MSG(extack, + "Reset module is not supported by this device, so flashing is not permitted"); + return -EOPNOTSUPP; + } + + if (dev->module_fw_flash_in_progress) { + NL_SET_ERR_MSG(extack, "Module firmware flashing already in progress"); + return -EBUSY; + } + + if (dev->flags & IFF_UP) { + NL_SET_ERR_MSG(extack, "Netdevice is up, so flashing is not permitted"); + return -EBUSY; + } + + if (devlink_port && devlink_port->attrs.split) { + NL_SET_ERR_MSG(extack, "Can't perform firmware flashing on a split port"); + return -EOPNOTSUPP; + } + + return 0; +} + +int ethnl_act_module_fw_flash(struct sk_buff *skb, struct genl_info *info) +{ + struct ethnl_req_info req_info = {}; + struct nlattr **tb = info->attrs; + struct net_device *dev; + int ret; + + ret = ethnl_parse_header_dev_get(&req_info, + tb[ETHTOOL_A_MODULE_FW_FLASH_HEADER], + genl_info_net(info), info->extack, + true); + if (ret < 0) + return ret; + dev = req_info.dev; + + rtnl_lock(); + ret = ethnl_ops_begin(dev); + if (ret < 0) + goto out_rtnl; + + ret = ethnl_module_fw_flash_validate(dev, info->extack); + if (ret < 0) + goto out_rtnl; + + ret = module_flash_fw(dev, tb, skb, info); + + ethnl_ops_complete(dev); + +out_rtnl: + rtnl_unlock(); + ethnl_parse_header_dev_put(&req_info); + return ret; +} + /* MODULE_FW_FLASH_NTF */ static int diff --git a/net/ethtool/module_fw.h b/net/ethtool/module_fw.h index d0fc2529b60e..634543a12d0c 100644 --- a/net/ethtool/module_fw.h +++ b/net/ethtool/module_fw.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0-only */ #include +#include "netlink.h" /** * struct ethnl_module_fw_flash_ntf_params - module firmware flashing @@ -54,6 +55,8 @@ struct ethtool_module_fw_flash { struct ethtool_cmis_fw_update_params fw_update; }; +void ethnl_module_fw_flash_sock_destroy(struct ethnl_sock_priv *sk_priv); + void ethnl_module_fw_flash_ntf_err(struct net_device *dev, struct ethnl_module_fw_flash_ntf_params *params, diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c index a5907bbde427..81fe2e5b95f6 100644 --- a/net/ethtool/netlink.c +++ b/net/ethtool/netlink.c @@ -4,6 +4,7 @@ #include #include #include "netlink.h" +#include "module_fw.h" static struct genl_family ethtool_genl_family; @@ -30,6 +31,35 @@ const struct nla_policy ethnl_header_policy_stats[] = { ETHTOOL_FLAGS_STATS), }; +int ethnl_sock_priv_set(struct sk_buff *skb, struct net_device *dev, u32 portid, + enum ethnl_sock_type type) +{ + struct ethnl_sock_priv *sk_priv; + + sk_priv = genl_sk_priv_get(ðtool_genl_family, NETLINK_CB(skb).sk); + if (IS_ERR(sk_priv)) + return PTR_ERR(sk_priv); + + sk_priv->dev = dev; + sk_priv->portid = portid; + sk_priv->type = type; + + return 0; +} + +static void ethnl_sock_priv_destroy(void *priv) +{ + struct ethnl_sock_priv *sk_priv = priv; + + switch (sk_priv->type) { + case ETHTOOL_SOCK_TYPE_MODULE_FW_FLASH: + ethnl_module_fw_flash_sock_destroy(sk_priv); + break; + default: + break; + } +} + int ethnl_ops_begin(struct net_device *dev) { int ret; @@ -1142,6 +1172,13 @@ static const struct genl_ops ethtool_genl_ops[] = { .policy = ethnl_mm_set_policy, .maxattr = ARRAY_SIZE(ethnl_mm_set_policy) - 1, }, + { + .cmd = ETHTOOL_MSG_MODULE_FW_FLASH_ACT, + .flags = GENL_UNS_ADMIN_PERM, + .doit = ethnl_act_module_fw_flash, + .policy = ethnl_module_fw_flash_act_policy, + .maxattr = ARRAY_SIZE(ethnl_module_fw_flash_act_policy) - 1, + }, }; static const struct genl_multicast_group ethtool_nl_mcgrps[] = { @@ -1158,6 +1195,8 @@ static struct genl_family ethtool_genl_family __ro_after_init = { .resv_start_op = ETHTOOL_MSG_MODULE_GET + 1, .mcgrps = ethtool_nl_mcgrps, .n_mcgrps = ARRAY_SIZE(ethtool_nl_mcgrps), + .sock_priv_size = sizeof(struct ethnl_sock_priv), + .sock_priv_destroy = ethnl_sock_priv_destroy, }; /* module setup */ diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h index 5e6c6a7b7adc..46ec273a87c5 100644 --- a/net/ethtool/netlink.h +++ b/net/ethtool/netlink.h @@ -284,6 +284,19 @@ struct ethnl_reply_data { int ethnl_ops_begin(struct net_device *dev); void ethnl_ops_complete(struct net_device *dev); +enum ethnl_sock_type { + ETHTOOL_SOCK_TYPE_MODULE_FW_FLASH, +}; + +struct ethnl_sock_priv { + struct net_device *dev; + u32 portid; + enum ethnl_sock_type type; +}; + +int ethnl_sock_priv_set(struct sk_buff *skb, struct net_device *dev, u32 portid, + enum ethnl_sock_type type); + /** * struct ethnl_request_ops - unified handling of GET and SET requests * @request_cmd: command id for request (GET) @@ -442,6 +455,7 @@ extern const struct nla_policy ethnl_plca_set_cfg_policy[ETHTOOL_A_PLCA_MAX + 1] extern const struct nla_policy ethnl_plca_get_status_policy[ETHTOOL_A_PLCA_HEADER + 1]; extern const struct nla_policy ethnl_mm_get_policy[ETHTOOL_A_MM_HEADER + 1]; extern const struct nla_policy ethnl_mm_set_policy[ETHTOOL_A_MM_MAX + 1]; +extern const struct nla_policy ethnl_module_fw_flash_act_policy[ETHTOOL_A_MODULE_FW_FLASH_PASSWORD + 1]; int ethnl_set_features(struct sk_buff *skb, struct genl_info *info); int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info); @@ -449,6 +463,7 @@ int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info); int ethnl_tunnel_info_doit(struct sk_buff *skb, struct genl_info *info); int ethnl_tunnel_info_start(struct netlink_callback *cb); int ethnl_tunnel_info_dumpit(struct sk_buff *skb, struct netlink_callback *cb); +int ethnl_act_module_fw_flash(struct sk_buff *skb, struct genl_info *info); extern const char stats_std_names[__ETHTOOL_STATS_CNT][ETH_GSTRING_LEN]; extern const char stats_eth_phy_names[__ETHTOOL_A_STATS_ETH_PHY_CNT][ETH_GSTRING_LEN]; -- cgit v1.2.3-58-ga151