From d538eca85c2aa6ecb5036e6ff47efc93d9f294da Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 11 Mar 2022 23:15:18 +0200 Subject: net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/slave.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) (limited to 'net/dsa/slave.c') diff --git a/net/dsa/slave.c b/net/dsa/slave.c index a61a7c54af20..97f5da81fe68 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include "dsa_priv.h" @@ -1852,6 +1853,123 @@ out_master_failed: return err; } +static int __maybe_unused +dsa_slave_dcbnl_set_default_prio(struct net_device *dev, struct dcb_app *app) +{ + struct dsa_port *dp = dsa_slave_to_port(dev); + struct dsa_switch *ds = dp->ds; + unsigned long mask, new_prio; + int err, port = dp->index; + + if (!ds->ops->port_set_default_prio) + return -EOPNOTSUPP; + + err = dcb_ieee_setapp(dev, app); + if (err) + return err; + + mask = dcb_ieee_getapp_mask(dev, app); + new_prio = __fls(mask); + + err = ds->ops->port_set_default_prio(ds, port, new_prio); + if (err) { + dcb_ieee_delapp(dev, app); + return err; + } + + return 0; +} + +static int __maybe_unused dsa_slave_dcbnl_ieee_setapp(struct net_device *dev, + struct dcb_app *app) +{ + switch (app->selector) { + case IEEE_8021QAZ_APP_SEL_ETHERTYPE: + switch (app->protocol) { + case 0: + return dsa_slave_dcbnl_set_default_prio(dev, app); + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; + } +} + +static int __maybe_unused +dsa_slave_dcbnl_del_default_prio(struct net_device *dev, struct dcb_app *app) +{ + struct dsa_port *dp = dsa_slave_to_port(dev); + struct dsa_switch *ds = dp->ds; + unsigned long mask, new_prio; + int err, port = dp->index; + + if (!ds->ops->port_set_default_prio) + return -EOPNOTSUPP; + + err = dcb_ieee_delapp(dev, app); + if (err) + return err; + + mask = dcb_ieee_getapp_mask(dev, app); + new_prio = mask ? __fls(mask) : 0; + + err = ds->ops->port_set_default_prio(ds, port, new_prio); + if (err) { + dcb_ieee_setapp(dev, app); + return err; + } + + return 0; +} + +static int __maybe_unused dsa_slave_dcbnl_ieee_delapp(struct net_device *dev, + struct dcb_app *app) +{ + switch (app->selector) { + case IEEE_8021QAZ_APP_SEL_ETHERTYPE: + switch (app->protocol) { + case 0: + return dsa_slave_dcbnl_del_default_prio(dev, app); + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; + } +} + +/* Pre-populate the DCB application priority table with the priorities + * configured during switch setup, which we read from hardware here. + */ +static int dsa_slave_dcbnl_init(struct net_device *dev) +{ + struct dsa_port *dp = dsa_slave_to_port(dev); + struct dsa_switch *ds = dp->ds; + int port = dp->index; + int err; + + if (ds->ops->port_get_default_prio) { + int prio = ds->ops->port_get_default_prio(ds, port); + struct dcb_app app = { + .selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE, + .protocol = 0, + .priority = prio, + }; + + if (prio < 0) + return prio; + + err = dcb_ieee_setapp(dev, &app); + if (err) + return err; + } + + return 0; +} + static const struct ethtool_ops dsa_slave_ethtool_ops = { .get_drvinfo = dsa_slave_get_drvinfo, .get_regs_len = dsa_slave_get_regs_len, @@ -1881,6 +1999,11 @@ static const struct ethtool_ops dsa_slave_ethtool_ops = { .self_test = dsa_slave_net_selftest, }; +static const struct dcbnl_rtnl_ops __maybe_unused dsa_slave_dcbnl_ops = { + .ieee_setapp = dsa_slave_dcbnl_ieee_setapp, + .ieee_delapp = dsa_slave_dcbnl_ieee_delapp, +}; + static struct devlink_port *dsa_slave_get_devlink_port(struct net_device *dev) { struct dsa_port *dp = dsa_slave_to_port(dev); @@ -2105,6 +2228,9 @@ int dsa_slave_create(struct dsa_port *port) return -ENOMEM; slave_dev->ethtool_ops = &dsa_slave_ethtool_ops; +#if IS_ENABLED(CONFIG_DCB) + slave_dev->dcbnl_ops = &dsa_slave_dcbnl_ops; +#endif if (!is_zero_ether_addr(port->mac)) eth_hw_addr_set(slave_dev, port->mac); else @@ -2162,6 +2288,17 @@ int dsa_slave_create(struct dsa_port *port) goto out_phy; } + if (IS_ENABLED(CONFIG_DCB)) { + ret = dsa_slave_dcbnl_init(slave_dev); + if (ret) { + netdev_err(slave_dev, + "failed to initialize DCB: %pe\n", + ERR_PTR(ret)); + rtnl_unlock(); + goto out_unregister; + } + } + ret = netdev_upper_dev_link(master, slave_dev, NULL); rtnl_unlock(); -- cgit v1.2.3-58-ga151