From efd68e7254503f3207805f674a1ea1d743f5dfe2 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:33 -0700 Subject: devicetree: add helper inline for retrieving a node's full name The pattern (np ? np->full_name : "") is rather common in the kernel, but can also make for quite long lines. This patch adds a new inline function, of_node_full_name() so that the test for a valid node pointer doesn't need to be open coded at all call sites. Signed-off-by: Grant Likely Cc: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner --- kernel/irq/irqdomain.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'kernel/irq') diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 41c1564103f1..38c5eb839c92 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -448,7 +448,7 @@ unsigned int irq_create_mapping(struct irq_domain *domain, } pr_debug("irq %lu on domain %s mapped to virtual irq %u\n", - hwirq, domain->of_node ? domain->of_node->full_name : "null", virq); + hwirq, of_node_full_name(domain->of_node), virq); return virq; } @@ -477,7 +477,7 @@ unsigned int irq_create_of_mapping(struct device_node *controller, return intspec[0]; #endif pr_warning("no irq domain found for %s !\n", - controller->full_name); + of_node_full_name(controller)); return 0; } @@ -725,8 +725,8 @@ static int virq_debug_show(struct seq_file *m, void *private) data = irq_desc_get_chip_data(desc); seq_printf(m, data ? "0x%p " : " %p ", data); - if (desc->irq_data.domain && desc->irq_data.domain->of_node) - p = desc->irq_data.domain->of_node->full_name; + if (desc->irq_data.domain) + p = of_node_full_name(desc->irq_data.domain->of_node); else p = none; seq_printf(m, "%s\n", p); -- cgit v1.2.3-58-ga151 From 5ca4db61e859526b2dbee3bcea3626d3de49a0b2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 Jun 2012 22:04:34 -0700 Subject: irqdomain: Simple NUMA awareness. While common irqdesc allocation is node aware, the irqdomain code is not. Presently we observe a number of regressions/inconsistencies on NUMA-capable platforms: - Platforms using irqdomains with legacy mappings, where the irq_descs are allocated node-local and the irqdomain data structure is not. - Drivers implementing irqdomains will lose node locality regardless of the underlying struct device's node id. This plugs in NUMA node id proliferation across the various allocation callsites by way of_node_to_nid() node lookup. While of_node_to_nid() does the right thing for OF-capable platforms it doesn't presently handle the non-DT case. This is trivially dealt with by simply wraping in to numa_node_id() unconditionally. Signed-off-by: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring Signed-off-by: Grant Likely --- include/linux/of.h | 15 ++++++++++----- kernel/irq/irqdomain.c | 13 ++++++++----- 2 files changed, 18 insertions(+), 10 deletions(-) (limited to 'kernel/irq') diff --git a/include/linux/of.h b/include/linux/of.h index 1012377cae92..76930ee78db5 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -158,11 +159,6 @@ static inline unsigned long of_read_ulong(const __be32 *cell, int size) #define OF_BAD_ADDR ((u64)-1) -#ifndef of_node_to_nid -static inline int of_node_to_nid(struct device_node *np) { return -1; } -#define of_node_to_nid of_node_to_nid -#endif - static inline const char* of_node_full_name(struct device_node *np) { return np ? np->full_name : ""; @@ -412,6 +408,15 @@ static inline int of_machine_is_compatible(const char *compat) while (0) #endif /* CONFIG_OF */ +#ifndef of_node_to_nid +static inline int of_node_to_nid(struct device_node *np) +{ + return numa_node_id(); +} + +#define of_node_to_nid of_node_to_nid +#endif + /** * of_property_read_bool - Findfrom a property * @np: device node from which the property value is to be read. diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 38c5eb839c92..79ae0ebb90ba 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -45,7 +46,8 @@ static struct irq_domain *irq_domain_alloc(struct device_node *of_node, { struct irq_domain *domain; - domain = kzalloc(sizeof(*domain), GFP_KERNEL); + domain = kzalloc_node(sizeof(*domain), GFP_KERNEL, + of_node_to_nid(of_node)); if (WARN_ON(!domain)) return NULL; @@ -229,7 +231,8 @@ struct irq_domain *irq_domain_add_linear(struct device_node *of_node, struct irq_domain *domain; unsigned int *revmap; - revmap = kzalloc(sizeof(*revmap) * size, GFP_KERNEL); + revmap = kzalloc_node(sizeof(*revmap) * size, GFP_KERNEL, + of_node_to_nid(of_node)); if (WARN_ON(!revmap)) return NULL; @@ -367,7 +370,7 @@ unsigned int irq_create_direct_mapping(struct irq_domain *domain) BUG_ON(domain == NULL); WARN_ON(domain->revmap_type != IRQ_DOMAIN_MAP_NOMAP); - virq = irq_alloc_desc_from(1, 0); + virq = irq_alloc_desc_from(1, of_node_to_nid(domain->of_node)); if (!virq) { pr_debug("create_direct virq allocation failed\n"); return 0; @@ -433,9 +436,9 @@ unsigned int irq_create_mapping(struct irq_domain *domain, hint = hwirq % nr_irqs; if (hint == 0) hint++; - virq = irq_alloc_desc_from(hint, 0); + virq = irq_alloc_desc_from(hint, of_node_to_nid(domain->of_node)); if (virq <= 0) - virq = irq_alloc_desc_from(1, 0); + virq = irq_alloc_desc_from(1, of_node_to_nid(domain->of_node)); if (virq <= 0) { pr_debug("-> virq allocation failed\n"); return 0; -- cgit v1.2.3-58-ga151 From 732557047128e5c200c3590efba39f10ac46bcb2 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:35 -0700 Subject: irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY Where irq_domain_associate() is called in irq_create_mapping, there is no need to test for IRQ_DOMAIN_MAP_LEGACY because it is already tested for earlier in the routine. Signed-off-by: Grant Likely Cc: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring --- kernel/irq/irqdomain.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'kernel/irq') diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 79ae0ebb90ba..b1f774cfd089 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -445,8 +445,7 @@ unsigned int irq_create_mapping(struct irq_domain *domain, } if (irq_setup_virq(domain, virq, hwirq)) { - if (domain->revmap_type != IRQ_DOMAIN_MAP_LEGACY) - irq_free_desc(virq); + irq_free_desc(virq); return 0; } -- cgit v1.2.3-58-ga151 From aed98048bd1c83469d96932c1901e867d9ba519a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:39 -0700 Subject: irqdomain: Make ops->map hook optional There isn't a really compelling reason to force ->map to be populated, so allow it to be left unset. Signed-off-by: Grant Likely Acked-by: Benjamin Herrenschmidt Cc: Paul Mundt Cc: Thomas Gleixner Cc: Rob Herring --- kernel/irq/irqdomain.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'kernel/irq') diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index b1f774cfd089..d3968e91bfd2 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -205,7 +205,8 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node, * one can then use irq_create_mapping() to * explicitly change them */ - ops->map(domain, irq, hwirq); + if (ops->map) + ops->map(domain, irq, hwirq); /* Clear norequest flags */ irq_clear_status_flags(irq, IRQ_NOREQUEST); @@ -340,8 +341,8 @@ static int irq_setup_virq(struct irq_domain *domain, unsigned int virq, irq_data->hwirq = hwirq; irq_data->domain = domain; - if (domain->ops->map(domain, virq, hwirq)) { - pr_debug("irq-%i==>hwirq-0x%lx mapping failed\n", virq, hwirq); + if (domain->ops->map && domain->ops->map(domain, virq, hwirq)) { + pr_err("irq-%i==>hwirq-0x%lx mapping failed\n", virq, hwirq); irq_data->domain = NULL; irq_data->hwirq = 0; return -1; @@ -763,12 +764,6 @@ static int __init irq_debugfs_init(void) __initcall(irq_debugfs_init); #endif /* CONFIG_IRQ_DOMAIN_DEBUG */ -static int irq_domain_simple_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hwirq) -{ - return 0; -} - /** * irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings * @@ -831,7 +826,6 @@ int irq_domain_xlate_onetwocell(struct irq_domain *d, EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell); const struct irq_domain_ops irq_domain_simple_ops = { - .map = irq_domain_simple_map, .xlate = irq_domain_xlate_onetwocell, }; EXPORT_SYMBOL_GPL(irq_domain_simple_ops); -- cgit v1.2.3-58-ga151 From 781d0f46d81e2c26c70649903b503bcfe817efc8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 5 Jul 2012 12:19:19 +0100 Subject: irq_domain: Standardise legacy/linear domain selection A large proportion of interrupt controllers that support legacy mappings do so because non-DT systems need to use fixed IRQ numbers when registering devices via buses but can otherwise use a linear mapping. The interrupt controller itself typically is not affected by the mapping used and best practice is to use a linear mapping where possible so drivers frequently select at runtime depending on if a legacy range has been allocated to them. Standardise this behaviour by providing irq_domain_register_simple() which will allocate a linear mapping unless a positive first_irq is provided in which case it will fall back to a legacy mapping. This helps make best practice for irq_domain adoption clearer. Signed-off-by: Mark Brown Signed-off-by: Grant Likely --- Documentation/IRQ-domain.txt | 5 +++++ include/linux/irqdomain.h | 5 +++++ kernel/irq/irqdomain.c | 30 ++++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+) (limited to 'kernel/irq') diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt index 27dcaabfb4db..1401cece745a 100644 --- a/Documentation/IRQ-domain.txt +++ b/Documentation/IRQ-domain.txt @@ -93,6 +93,7 @@ Linux IRQ number into the hardware. Most drivers cannot use this mapping. ==== Legacy ==== +irq_domain_add_simple() irq_domain_add_legacy() irq_domain_add_legacy_isa() @@ -115,3 +116,7 @@ The legacy map should only be used if fixed IRQ mappings must be supported. For example, ISA controllers would use the legacy map for mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ numbers. + +Most users of legacy mappings should use irq_domain_add_simple() which +will use a legacy domain only if an IRQ range is supplied by the +system and will otherwise use a linear domain mapping. diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 5abb533eb8eb..17b60be30fff 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -112,6 +112,11 @@ struct irq_domain { }; #ifdef CONFIG_IRQ_DOMAIN +struct irq_domain *irq_domain_add_simple(struct device_node *of_node, + unsigned int size, + unsigned int first_irq, + const struct irq_domain_ops *ops, + void *host_data); struct irq_domain *irq_domain_add_legacy(struct device_node *of_node, unsigned int size, unsigned int first_irq, diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index d3968e91bfd2..0c51958c6335 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -139,6 +139,36 @@ static unsigned int irq_domain_legacy_revmap(struct irq_domain *domain, return hwirq - first_hwirq + domain->revmap_data.legacy.first_irq; } +/** + * irq_domain_add_simple() - Allocate and register a simple irq_domain. + * @of_node: pointer to interrupt controller's device tree node. + * @size: total number of irqs in mapping + * @first_irq: first number of irq block assigned to the domain + * @ops: map/unmap domain callbacks + * @host_data: Controller private data pointer + * + * Allocates a legacy irq_domain if irq_base is positive or a linear + * domain otherwise. + * + * This is intended to implement the expected behaviour for most + * interrupt controllers which is that a linear mapping should + * normally be used unless the system requires a legacy mapping in + * order to support supplying interrupt numbers during non-DT + * registration of devices. + */ +struct irq_domain *irq_domain_add_simple(struct device_node *of_node, + unsigned int size, + unsigned int first_irq, + const struct irq_domain_ops *ops, + void *host_data) +{ + if (first_irq > 0) + return irq_domain_add_legacy(of_node, size, first_irq, 0, + ops, host_data); + else + return irq_domain_add_linear(of_node, size, ops, host_data); +} + /** * irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain. * @of_node: pointer to interrupt controller's device tree node. -- cgit v1.2.3-58-ga151 From 22076c7712be29a602de45b1c573f31adbd428a9 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 20 Jun 2012 17:00:30 +0800 Subject: irq_domain: correct a minor wrong comment for linear revmap The revmap type should be linear for irq_domain_add_linear function. Signed-off-by: Dong Aisheng Signed-off-by: Grant Likely --- kernel/irq/irqdomain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel/irq') diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 0c51958c6335..622fdf4b82b6 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -248,7 +248,7 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node, EXPORT_SYMBOL_GPL(irq_domain_add_legacy); /** - * irq_domain_add_linear() - Allocate and register a legacy revmap irq_domain. + * irq_domain_add_linear() - Allocate and register a linear revmap irq_domain. * @of_node: pointer to interrupt controller's device tree node. * @size: Number of interrupts in the domain. * @ops: map/unmap domain callbacks -- cgit v1.2.3-58-ga151 From 913af2070731bfc1bd39bb35c5cd2fd66f5eff12 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:35 -0700 Subject: irqdomain: Split disassociating code into separate function This patch moves the irq disassociation code out into a separate function in preparation to extend irq_setup_virq to handle multiple irqs and rename it for use by interrupt controller drivers. The new function will be used by irq_setup_virq() in its error path. Signed-off-by: Grant Likely Acked-by: Benjamin Herrenschmidt Cc: Paul Mundt Cc: Thomas Gleixner Cc: Rob Herring --- kernel/irq/irqdomain.c | 75 +++++++++++++++++++++++++++++++------------------- 1 file changed, 47 insertions(+), 28 deletions(-) (limited to 'kernel/irq') diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 622fdf4b82b6..17634f2c9f6c 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -364,6 +364,52 @@ void irq_set_default_host(struct irq_domain *domain) } EXPORT_SYMBOL_GPL(irq_set_default_host); +static void irq_domain_disassociate_many(struct irq_domain *domain, + unsigned int irq_base, int count) +{ + /* + * disassociate in reverse order; + * not strictly necessary, but nice for unwinding + */ + while (count--) { + int irq = irq_base + count; + struct irq_data *irq_data = irq_get_irq_data(irq); + irq_hw_number_t hwirq = irq_data->hwirq; + + if (WARN_ON(!irq_data || irq_data->domain != domain)) + continue; + + irq_set_status_flags(irq, IRQ_NOREQUEST); + + /* remove chip and handler */ + irq_set_chip_and_handler(irq, NULL, NULL); + + /* Make sure it's completed */ + synchronize_irq(irq); + + /* Tell the PIC about it */ + if (domain->ops->unmap) + domain->ops->unmap(domain, irq); + smp_mb(); + + irq_data->domain = NULL; + irq_data->hwirq = 0; + + /* Clear reverse map */ + switch(domain->revmap_type) { + case IRQ_DOMAIN_MAP_LINEAR: + if (hwirq < domain->revmap_data.linear.size) + domain->revmap_data.linear.revmap[hwirq] = 0; + break; + case IRQ_DOMAIN_MAP_TREE: + mutex_lock(&revmap_trees_mutex); + radix_tree_delete(&domain->revmap_data.tree, hwirq); + mutex_unlock(&revmap_trees_mutex); + break; + } + } +} + static int irq_setup_virq(struct irq_domain *domain, unsigned int virq, irq_hw_number_t hwirq) { @@ -544,7 +590,6 @@ void irq_dispose_mapping(unsigned int virq) { struct irq_data *irq_data = irq_get_irq_data(virq); struct irq_domain *domain; - irq_hw_number_t hwirq; if (!virq || !irq_data) return; @@ -557,33 +602,7 @@ void irq_dispose_mapping(unsigned int virq) if (domain->revmap_type == IRQ_DOMAIN_MAP_LEGACY) return; - irq_set_status_flags(virq, IRQ_NOREQUEST); - - /* remove chip and handler */ - irq_set_chip_and_handler(virq, NULL, NULL); - - /* Make sure it's completed */ - synchronize_irq(virq); - - /* Tell the PIC about it */ - if (domain->ops->unmap) - domain->ops->unmap(domain, virq); - smp_mb(); - - /* Clear reverse map */ - hwirq = irq_data->hwirq; - switch(domain->revmap_type) { - case IRQ_DOMAIN_MAP_LINEAR: - if (hwirq < domain->revmap_data.linear.size) - domain->revmap_data.linear.revmap[hwirq] = 0; - break; - case IRQ_DOMAIN_MAP_TREE: - mutex_lock(&revmap_trees_mutex); - radix_tree_delete(&domain->revmap_data.tree, hwirq); - mutex_unlock(&revmap_trees_mutex); - break; - } - + irq_domain_disassociate_many(domain, virq, 1); irq_free_desc(virq); } EXPORT_SYMBOL_GPL(irq_dispose_mapping); -- cgit v1.2.3-58-ga151 From 2a71a1a9da40dfbd5b23d4312aa1641385581f4a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:36 -0700 Subject: irqdomain: Always update revmap when setting up a virq At irq_setup_virq() time all of the data needed to update the reverse map is available, but the current code ignores it and relies upon the slow path to insert revmap records. This patch adds revmap updating to the setup path so the slow path will no longer be necessary. Signed-off-by: Grant Likely Cc: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring --- arch/powerpc/sysdev/xics/xics-common.c | 3 --- kernel/irq/irqdomain.c | 12 ++++++++++++ 2 files changed, 12 insertions(+), 3 deletions(-) (limited to 'kernel/irq') diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index cd1d18db92c6..9049d9f44485 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -329,9 +329,6 @@ static int xics_host_map(struct irq_domain *h, unsigned int virq, pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw); - /* Insert the interrupt mapping into the radix tree for fast lookup */ - irq_radix_revmap_insert(xics_host, virq, hw); - /* They aren't all level sensitive but we just don't really know */ irq_set_status_flags(virq, IRQ_LEVEL); diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 17634f2c9f6c..091732c9dbdc 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -424,6 +424,18 @@ static int irq_setup_virq(struct irq_domain *domain, unsigned int virq, return -1; } + switch (domain->revmap_type) { + case IRQ_DOMAIN_MAP_LINEAR: + if (hwirq < domain->revmap_data.linear.size) + domain->revmap_data.linear.revmap[hwirq] = virq; + break; + case IRQ_DOMAIN_MAP_TREE: + mutex_lock(&revmap_trees_mutex); + irq_radix_revmap_insert(domain, virq, hwirq); + mutex_unlock(&revmap_trees_mutex); + break; + } + irq_clear_status_flags(virq, IRQ_NOREQUEST); return 0; -- cgit v1.2.3-58-ga151 From 98aa468e045a0091a7c34d9f5205a629634fabf4 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 17 Jun 2012 16:17:04 -0600 Subject: irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring --- include/linux/irqdomain.h | 19 ++++++++ kernel/irq/irqdomain.c | 113 ++++++++++++++++++++++++++++++++++++---------- 2 files changed, 107 insertions(+), 25 deletions(-) (limited to 'kernel/irq') diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 17b60be30fff..eab8a0e60b8e 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -149,12 +149,31 @@ static inline struct irq_domain *irq_domain_add_legacy_isa( extern void irq_domain_remove(struct irq_domain *host); +extern int irq_domain_associate_many(struct irq_domain *domain, + unsigned int irq_base, + irq_hw_number_t hwirq_base, int count); +static inline int irq_domain_associate(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + return irq_domain_associate_many(domain, irq, hwirq, 1); +} + extern unsigned int irq_create_mapping(struct irq_domain *host, irq_hw_number_t hwirq); extern void irq_dispose_mapping(unsigned int virq); extern unsigned int irq_find_mapping(struct irq_domain *host, irq_hw_number_t hwirq); extern unsigned int irq_create_direct_mapping(struct irq_domain *host); +extern int irq_create_strict_mappings(struct irq_domain *domain, + unsigned int irq_base, + irq_hw_number_t hwirq_base, int count); + +static inline int irq_create_identity_mapping(struct irq_domain *host, + irq_hw_number_t hwirq) +{ + return irq_create_strict_mappings(host, hwirq, hwirq, 1); +} + extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq, irq_hw_number_t hwirq); extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host, diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 091732c9dbdc..a07d92446b66 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -410,36 +410,61 @@ static void irq_domain_disassociate_many(struct irq_domain *domain, } } -static int irq_setup_virq(struct irq_domain *domain, unsigned int virq, - irq_hw_number_t hwirq) +int irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base, + irq_hw_number_t hwirq_base, int count) { - struct irq_data *irq_data = irq_get_irq_data(virq); + unsigned int virq = irq_base; + irq_hw_number_t hwirq = hwirq_base; + int i; - irq_data->hwirq = hwirq; - irq_data->domain = domain; - if (domain->ops->map && domain->ops->map(domain, virq, hwirq)) { - pr_err("irq-%i==>hwirq-0x%lx mapping failed\n", virq, hwirq); - irq_data->domain = NULL; - irq_data->hwirq = 0; - return -1; - } + pr_debug("%s(%s, irqbase=%i, hwbase=%i, count=%i)\n", __func__, + of_node_full_name(domain->of_node), irq_base, (int)hwirq_base, count); - switch (domain->revmap_type) { - case IRQ_DOMAIN_MAP_LINEAR: - if (hwirq < domain->revmap_data.linear.size) - domain->revmap_data.linear.revmap[hwirq] = virq; - break; - case IRQ_DOMAIN_MAP_TREE: - mutex_lock(&revmap_trees_mutex); - irq_radix_revmap_insert(domain, virq, hwirq); - mutex_unlock(&revmap_trees_mutex); - break; - } + for (i = 0; i < count; i++) { + struct irq_data *irq_data = irq_get_irq_data(virq + i); + + if (WARN(!irq_data, "error: irq_desc not allocated; " + "irq=%i hwirq=0x%x\n", virq + i, (int)hwirq + i)) + return -EINVAL; + if (WARN(irq_data->domain, "error: irq_desc already associated; " + "irq=%i hwirq=0x%x\n", virq + i, (int)hwirq + i)) + return -EINVAL; + }; + + for (i = 0; i < count; i++, virq++, hwirq++) { + struct irq_data *irq_data = irq_get_irq_data(virq); + + irq_data->hwirq = hwirq; + irq_data->domain = domain; + if (domain->ops->map && domain->ops->map(domain, virq, hwirq)) { + pr_err("irq-%i==>hwirq-0x%lx mapping failed\n", virq, hwirq); + irq_data->domain = NULL; + irq_data->hwirq = 0; + goto err_unmap; + } + + switch (domain->revmap_type) { + case IRQ_DOMAIN_MAP_LINEAR: + if (hwirq < domain->revmap_data.linear.size) + domain->revmap_data.linear.revmap[hwirq] = virq; + break; + case IRQ_DOMAIN_MAP_TREE: + mutex_lock(&revmap_trees_mutex); + irq_radix_revmap_insert(domain, virq, hwirq); + mutex_unlock(&revmap_trees_mutex); + break; + } - irq_clear_status_flags(virq, IRQ_NOREQUEST); + irq_clear_status_flags(virq, IRQ_NOREQUEST); + } return 0; + + err_unmap: + irq_domain_disassociate_many(domain, irq_base, i); + return -EINVAL; } +EXPORT_SYMBOL_GPL(irq_domain_associate_many); /** * irq_create_direct_mapping() - Allocate an irq for direct mapping @@ -472,7 +497,7 @@ unsigned int irq_create_direct_mapping(struct irq_domain *domain) } pr_debug("create_direct obtained virq %d\n", virq); - if (irq_setup_virq(domain, virq, virq)) { + if (irq_domain_associate(domain, virq, virq)) { irq_free_desc(virq); return 0; } @@ -533,7 +558,7 @@ unsigned int irq_create_mapping(struct irq_domain *domain, return 0; } - if (irq_setup_virq(domain, virq, hwirq)) { + if (irq_domain_associate(domain, virq, hwirq)) { irq_free_desc(virq); return 0; } @@ -545,6 +570,44 @@ unsigned int irq_create_mapping(struct irq_domain *domain, } EXPORT_SYMBOL_GPL(irq_create_mapping); +/** + * irq_create_strict_mappings() - Map a range of hw irqs to fixed linux irqs + * @domain: domain owning the interrupt range + * @irq_base: beginning of linux IRQ range + * @hwirq_base: beginning of hardware IRQ range + * @count: Number of interrupts to map + * + * This routine is used for allocating and mapping a range of hardware + * irqs to linux irqs where the linux irq numbers are at pre-defined + * locations. For use by controllers that already have static mappings + * to insert in to the domain. + * + * Non-linear users can use irq_create_identity_mapping() for IRQ-at-a-time + * domain insertion. + * + * 0 is returned upon success, while any failure to establish a static + * mapping is treated as an error. + */ +int irq_create_strict_mappings(struct irq_domain *domain, unsigned int irq_base, + irq_hw_number_t hwirq_base, int count) +{ + int ret; + + ret = irq_alloc_descs(irq_base, irq_base, count, + of_node_to_nid(domain->of_node)); + if (unlikely(ret < 0)) + return ret; + + ret = irq_domain_associate_many(domain, irq_base, hwirq_base, count); + if (unlikely(ret < 0)) { + irq_free_descs(irq_base, count); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(irq_create_strict_mappings); + unsigned int irq_create_of_mapping(struct device_node *controller, const u32 *intspec, unsigned int intsize) { -- cgit v1.2.3-58-ga151 From d6b0d1f7058f7cf818138cd7fd116dca3f3576d9 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:37 -0700 Subject: irqdomain: Eliminate dedicated radix lookup functions In preparation to remove the slow revmap path, eliminate the public radix revmap lookup functions. This simplifies the code and makes the slowpath removal patch a lot simpler. Signed-off-by: Grant Likely Cc: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring --- arch/powerpc/sysdev/xics/icp-hv.c | 2 +- arch/powerpc/sysdev/xics/icp-native.c | 2 +- include/linux/irqdomain.h | 4 --- kernel/irq/irqdomain.c | 60 +---------------------------------- 4 files changed, 3 insertions(+), 65 deletions(-) (limited to 'kernel/irq') diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c index 253dce98c16e..14469cf9df68 100644 --- a/arch/powerpc/sysdev/xics/icp-hv.c +++ b/arch/powerpc/sysdev/xics/icp-hv.c @@ -111,7 +111,7 @@ static unsigned int icp_hv_get_irq(void) if (vec == XICS_IRQ_SPURIOUS) return NO_IRQ; - irq = irq_radix_revmap_lookup(xics_host, vec); + irq = irq_find_mapping(xics_host, vec); if (likely(irq != NO_IRQ)) { xics_push_cppr(vec); return irq; diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c index 4c79b6fbee1c..48861d3fcd07 100644 --- a/arch/powerpc/sysdev/xics/icp-native.c +++ b/arch/powerpc/sysdev/xics/icp-native.c @@ -119,7 +119,7 @@ static unsigned int icp_native_get_irq(void) if (vec == XICS_IRQ_SPURIOUS) return NO_IRQ; - irq = irq_radix_revmap_lookup(xics_host, vec); + irq = irq_find_mapping(xics_host, vec); if (likely(irq != NO_IRQ)) { xics_push_cppr(vec); return irq; diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index eab8a0e60b8e..0d5b17bf5e51 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -174,10 +174,6 @@ static inline int irq_create_identity_mapping(struct irq_domain *host, return irq_create_strict_mappings(host, hwirq, hwirq, 1); } -extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq, - irq_hw_number_t hwirq); -extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host, - irq_hw_number_t hwirq); extern unsigned int irq_linear_revmap(struct irq_domain *host, irq_hw_number_t hwirq); diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index a07d92446b66..f540bb1eff84 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -450,7 +450,7 @@ int irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base, break; case IRQ_DOMAIN_MAP_TREE: mutex_lock(&revmap_trees_mutex); - irq_radix_revmap_insert(domain, virq, hwirq); + radix_tree_insert(&domain->revmap_data.tree, hwirq, irq_data); mutex_unlock(&revmap_trees_mutex); break; } @@ -723,64 +723,6 @@ unsigned int irq_find_mapping(struct irq_domain *domain, } EXPORT_SYMBOL_GPL(irq_find_mapping); -/** - * irq_radix_revmap_lookup() - Find a linux irq from a hw irq number. - * @domain: domain owning this hardware interrupt - * @hwirq: hardware irq number in that domain space - * - * This is a fast path, for use by irq controller code that uses radix tree - * revmaps - */ -unsigned int irq_radix_revmap_lookup(struct irq_domain *domain, - irq_hw_number_t hwirq) -{ - struct irq_data *irq_data; - - if (WARN_ON_ONCE(domain->revmap_type != IRQ_DOMAIN_MAP_TREE)) - return irq_find_mapping(domain, hwirq); - - /* - * Freeing an irq can delete nodes along the path to - * do the lookup via call_rcu. - */ - rcu_read_lock(); - irq_data = radix_tree_lookup(&domain->revmap_data.tree, hwirq); - rcu_read_unlock(); - - /* - * If found in radix tree, then fine. - * Else fallback to linear lookup - this should not happen in practice - * as it means that we failed to insert the node in the radix tree. - */ - return irq_data ? irq_data->irq : irq_find_mapping(domain, hwirq); -} -EXPORT_SYMBOL_GPL(irq_radix_revmap_lookup); - -/** - * irq_radix_revmap_insert() - Insert a hw irq to linux irq number mapping. - * @domain: domain owning this hardware interrupt - * @virq: linux irq number - * @hwirq: hardware irq number in that domain space - * - * This is for use by irq controllers that use a radix tree reverse - * mapping for fast lookup. - */ -void irq_radix_revmap_insert(struct irq_domain *domain, unsigned int virq, - irq_hw_number_t hwirq) -{ - struct irq_data *irq_data = irq_get_irq_data(virq); - - if (WARN_ON(domain->revmap_type != IRQ_DOMAIN_MAP_TREE)) - return; - - if (virq) { - mutex_lock(&revmap_trees_mutex); - radix_tree_insert(&domain->revmap_data.tree, hwirq, irq_data); - mutex_unlock(&revmap_trees_mutex); - } -} -EXPORT_SYMBOL_GPL(irq_radix_revmap_insert); - /** * irq_linear_revmap() - Find a linux irq from a hw irq number. * @domain: domain owning this hardware interrupt -- cgit v1.2.3-58-ga151 From 9844a5524ec532aee826c35e3031637c7fc8287b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:38 -0700 Subject: irqdomain: Fix irq_create_direct_mapping() to test irq_domain type. irq_create_direct_mapping can only be used with the NOMAP type. Make the function test to ensure it is passed the correct type of irq_domain. Signed-off-by: Grant Likely Cc: Paul Mundt Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Rob Herring --- kernel/irq/irqdomain.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'kernel/irq') diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index f540bb1eff84..c0e638ba9c2a 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -481,8 +481,8 @@ unsigned int irq_create_direct_mapping(struct irq_domain *domain) if (domain == NULL) domain = irq_default_domain; - BUG_ON(domain == NULL); - WARN_ON(domain->revmap_type != IRQ_DOMAIN_MAP_NOMAP); + if (WARN_ON(!domain || domain->revmap_type != IRQ_DOMAIN_MAP_NOMAP)) + return 0; virq = irq_alloc_desc_from(1, of_node_to_nid(domain->of_node)); if (!virq) { -- cgit v1.2.3-58-ga151 From 4c0946c47463defa681b83294383dc996d255bb7 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sun, 3 Jun 2012 22:04:39 -0700 Subject: irqdomain: eliminate slow-path revmap lookups With the current state of irq_domain, the reverse map is always updated when new IRQs get mapped. This means that the irq_find_mapping() function can be simplified to execute the revmap lookup functions unconditionally This patch adds lookup functions for the revmaps that don't yet have one and removes the slow path lookup code path. v8: Broke out unrelated changes into separate patches. Rebased on Paul's irq association patches. v7: Rebased to irqdomain/next for v3.4 and applied before the removal of 'hint' v6: Remove the slow path entirely. The only place where the slow path could get called is for a linear mapping if the hwirq number is larger than the linear revmap size. There shouldn't be any interrupt controllers that do that. v5: rewrite to not use a ->revmap() callback. It is simpler, smaller, safer and faster to open code each of the revmap lookups directly into irq_find_mapping() via a switch statement. v4: Fix build failure on incorrect variable reference. Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Cc: Paul Mundt Cc: Rob Herring --- kernel/irq/irqdomain.c | 65 +++++++++++++++++++------------------------------- 1 file changed, 25 insertions(+), 40 deletions(-) (limited to 'kernel/irq') diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index c0e638ba9c2a..170724a07a2c 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -686,16 +686,11 @@ EXPORT_SYMBOL_GPL(irq_dispose_mapping); * irq_find_mapping() - Find a linux irq from an hw irq number. * @domain: domain owning this hardware interrupt * @hwirq: hardware irq number in that domain space - * - * This is a slow path, for use by generic code. It's expected that an - * irq controller implementation directly calls the appropriate low level - * mapping function. */ unsigned int irq_find_mapping(struct irq_domain *domain, irq_hw_number_t hwirq) { - unsigned int i; - unsigned int hint = hwirq % nr_irqs; + struct irq_data *data; /* Look for default domain if nececssary */ if (domain == NULL) @@ -703,22 +698,25 @@ unsigned int irq_find_mapping(struct irq_domain *domain, if (domain == NULL) return 0; - /* legacy -> bail early */ - if (domain->revmap_type == IRQ_DOMAIN_MAP_LEGACY) + switch (domain->revmap_type) { + case IRQ_DOMAIN_MAP_LEGACY: return irq_domain_legacy_revmap(domain, hwirq); - - /* Slow path does a linear search of the map */ - if (hint == 0) - hint = 1; - i = hint; - do { - struct irq_data *data = irq_get_irq_data(i); + case IRQ_DOMAIN_MAP_LINEAR: + return irq_linear_revmap(domain, hwirq); + case IRQ_DOMAIN_MAP_TREE: + rcu_read_lock(); + data = radix_tree_lookup(&domain->revmap_data.tree, hwirq); + rcu_read_unlock(); + if (data) + return data->irq; + break; + case IRQ_DOMAIN_MAP_NOMAP: + data = irq_get_irq_data(hwirq); if (data && (data->domain == domain) && (data->hwirq == hwirq)) - return i; - i++; - if (i >= nr_irqs) - i = 1; - } while(i != hint); + return hwirq; + break; + } + return 0; } EXPORT_SYMBOL_GPL(irq_find_mapping); @@ -728,32 +726,19 @@ EXPORT_SYMBOL_GPL(irq_find_mapping); * @domain: domain owning this hardware interrupt * @hwirq: hardware irq number in that domain space * - * This is a fast path, for use by irq controller code that uses linear - * revmaps. It does fallback to the slow path if the revmap doesn't exist - * yet and will create the revmap entry with appropriate locking + * This is a fast path that can be called directly by irq controller code to + * save a handful of instructions. */ unsigned int irq_linear_revmap(struct irq_domain *domain, irq_hw_number_t hwirq) { - unsigned int *revmap; + BUG_ON(domain->revmap_type != IRQ_DOMAIN_MAP_LINEAR); - if (WARN_ON_ONCE(domain->revmap_type != IRQ_DOMAIN_MAP_LINEAR)) - return irq_find_mapping(domain, hwirq); - - /* Check revmap bounds */ - if (unlikely(hwirq >= domain->revmap_data.linear.size)) - return irq_find_mapping(domain, hwirq); - - /* Check if revmap was allocated */ - revmap = domain->revmap_data.linear.revmap; - if (unlikely(revmap == NULL)) - return irq_find_mapping(domain, hwirq); - - /* Fill up revmap with slow path if no mapping found */ - if (unlikely(!revmap[hwirq])) - revmap[hwirq] = irq_find_mapping(domain, hwirq); + /* Check revmap bounds; complain if exceeded */ + if (WARN_ON(hwirq >= domain->revmap_data.linear.size)) + return 0; - return revmap[hwirq]; + return domain->revmap_data.linear.revmap[hwirq]; } EXPORT_SYMBOL_GPL(irq_linear_revmap); -- cgit v1.2.3-58-ga151 From f5a1ad057e6da5d0fc9c5677ff44797d193d3e62 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 20 Jul 2012 10:33:19 +0100 Subject: irqdomain: Improve diagnostics when a domain mapping fails When the map operation fails log the error code we get and add a WARN_ON() so we get a backtrace (which should help work out which interrupt is the source of the issue). Signed-off-by: Mark Brown Signed-off-by: Grant Likely --- kernel/irq/irqdomain.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'kernel/irq') diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 170724a07a2c..49a77727db42 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -415,7 +415,7 @@ int irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base, { unsigned int virq = irq_base; irq_hw_number_t hwirq = hwirq_base; - int i; + int i, ret; pr_debug("%s(%s, irqbase=%i, hwbase=%i, count=%i)\n", __func__, of_node_full_name(domain->of_node), irq_base, (int)hwirq_base, count); @@ -436,11 +436,16 @@ int irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base, irq_data->hwirq = hwirq; irq_data->domain = domain; - if (domain->ops->map && domain->ops->map(domain, virq, hwirq)) { - pr_err("irq-%i==>hwirq-0x%lx mapping failed\n", virq, hwirq); - irq_data->domain = NULL; - irq_data->hwirq = 0; - goto err_unmap; + if (domain->ops->map) { + ret = domain->ops->map(domain, virq, hwirq); + if (ret != 0) { + pr_err("irq-%i==>hwirq-0x%lx mapping failed: %d\n", + virq, hwirq, ret); + WARN_ON(1); + irq_data->domain = NULL; + irq_data->hwirq = 0; + goto err_unmap; + } } switch (domain->revmap_type) { -- cgit v1.2.3-58-ga151