From 73f907fd5fa56b0066d199bdd7126bbd04f6cd7b Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 24 Oct 2016 16:46:20 +0200 Subject: mtd: nand: Fix data interface configuration logic When changing from one data interface setting to another, one has to ensure a specific sequence which is described in the ONFI spec. One of these constraints is that the CE line has go high after a reset before a command can be sent with the new data interface setting, which is not guaranteed by the current implementation. Rework the nand_reset() function and all the call sites to make sure the CE line is asserted and released when required. Also make sure to actually apply the new data interface setting on the first die. Signed-off-by: Boris Brezillon Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection") Reviewed-by: Sascha Hauer Tested-by: Marc Gonzalez --- include/linux/mtd/nand.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index c5d3d5024fc8..d8905a229f34 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1184,7 +1184,7 @@ int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page); /* Reset and initialize a NAND device */ -int nand_reset(struct nand_chip *chip); +int nand_reset(struct nand_chip *chip, int chipnr); /* Free resources held by the NAND device */ void nand_cleanup(struct nand_chip *chip); -- cgit v1.2.3-58-ga151