From 35ac6f081f26e1b6b3482b9c8dfccebe7817c691 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 9 Nov 2010 13:57:29 +0000 Subject: mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms SDHC2 is newly added in C0 stepping of Langwell. Without the Moorestown specific quirk, the default pci_probe will be called and crash the kernel. This patch unblocks the crash problem on C0 by using the same probing function as HC1, which limits the number of slots to one. Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Chris Ball --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index c6bcfe93b9ca..d369b533dc2a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2441,6 +2441,7 @@ #define PCI_DEVICE_ID_INTEL_MFD_SDIO2 0x0822 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824 +#define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 #define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062 -- cgit v1.2.3-58-ga151 From ed919b0125b26dcc052e44836f66e7e1f5c49c7e Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Fri, 19 Nov 2010 09:29:09 +0200 Subject: mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD Some board/card/host configurations are not capable of powering off the card after boot. To support such configurations, and to allow smoother transition to runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to explicitly indicate whether it's OK to power off their cards after boot. SDIO core will enable runtime PM for a card only if that cap is set. As a result, the card will be powered down after boot, and will only be powered up again when a driver is loaded (and then it's up to the driver to decide whether power will be kept or not). This will prevent sdio_bus_probe() failures with setups that do not support powering off the card. Reported-and-tested-by: Daniel Drake Reported-and-tested-by: Arnd Hannemann Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball --- drivers/mmc/core/sdio.c | 37 +++++++++++++++++++++++-------------- drivers/mmc/core/sdio_bus.c | 33 ++++++++++++++++++++++----------- include/linux/mmc/host.h | 1 + 3 files changed, 46 insertions(+), 25 deletions(-) (limited to 'include') diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 42a949b723b8..efef5f94ac42 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host) BUG_ON(!host->card); /* Make sure card is powered before detecting it */ - err = pm_runtime_get_sync(&host->card->dev); - if (err < 0) - goto out; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + err = pm_runtime_get_sync(&host->card->dev); + if (err < 0) + goto out; + } mmc_claim_host(host); @@ -571,7 +573,8 @@ static void mmc_sdio_detect(struct mmc_host *host) * is about to show up at this point, the _sync variant is * desirable anyway. */ - pm_runtime_put_sync(&host->card->dev); + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_sync(&host->card->dev); out: if (err) { @@ -728,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) card = host->card; /* - * Let runtime PM core know our card is active + * Enable runtime PM only if supported by host+card+board */ - err = pm_runtime_set_active(&card->dev); - if (err) - goto remove; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + /* + * Let runtime PM core know our card is active + */ + err = pm_runtime_set_active(&card->dev); + if (err) + goto remove; - /* - * Enable runtime PM for this card - */ - pm_runtime_enable(&card->dev); + /* + * Enable runtime PM for this card + */ + pm_runtime_enable(&card->dev); + } /* * The number of functions on the card is encoded inside @@ -755,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) goto remove; /* - * Enable Runtime PM for this func + * Enable Runtime PM for this func (if supported) */ - pm_runtime_enable(&card->sdio_func[i]->dev); + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_enable(&card->sdio_func[i]->dev); } mmc_release_host(host); diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 2716c7ab6bbf..203da443e339 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -17,6 +17,7 @@ #include #include +#include #include #include "sdio_cis.h" @@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev) * it should call pm_runtime_put_noidle() in its probe routine and * pm_runtime_get_noresume() in its remove routine. */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + } /* Set the default block size so the driver is sure it's something * sensible. */ @@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev) return 0; disable_runtimepm: - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); out: return ret; } @@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev) { struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); - int ret; + int ret = 0; /* Make sure card is powered before invoking ->remove() */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + } drv->remove(func); @@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev) } /* First, undo the increment made directly above */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); /* Then undo the runtime PM settings in sdio_bus_probe() */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); out: return ret; @@ -191,6 +199,8 @@ out: static int sdio_bus_pm_prepare(struct device *dev) { + struct sdio_func *func = dev_to_sdio_func(dev); + /* * Resume an SDIO device which was suspended at run time at this * point, in order to allow standard SDIO suspend/resume paths @@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev) * since there is little point in failing system suspend if a * device can't be resumed. */ - pm_runtime_resume(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_resume(dev); return 0; } diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 6d87f68ce4b6..30f6fad99a58 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -168,6 +168,7 @@ struct mmc_host { /* DDR mode at 1.8V */ #define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ /* DDR mode at 1.2V */ +#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */ mmc_pm_flag_t pm_caps; /* supported pm features */ -- cgit v1.2.3-58-ga151