From 69279fb9a95051971ac03e558c4d46e7ba84ab3a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 31 Dec 2008 12:52:41 +0000 Subject: regulator: Clean up kerneldoc warnings Remove kerneldoc warnings that don't relate to missing documentation, mostly by renaming parameters in the documentation to match their actual names. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index afdc4558bb94..801bf77ff4e2 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -104,10 +104,10 @@ struct regulator; /** * struct regulator_bulk_data - Data used for bulk regulator operations. * - * @supply The name of the supply. Initialised by the user before - * using the bulk regulator APIs. - * @consumer The regulator consumer for the supply. This will be managed - * by the bulk API. + * @supply: The name of the supply. Initialised by the user before + * using the bulk regulator APIs. + * @consumer: The regulator consumer for the supply. This will be managed + * by the bulk API. * * The regulator APIs provide a series of regulator_bulk_() API calls as * a convenience to consumers which require multiple supplies. This -- cgit v1.2.3-58-ga151 From c8e7e4640facbe99d10a6e262523b25be129b9b9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 31 Dec 2008 12:52:42 +0000 Subject: regulator: Add missing kerneldoc This is only the documentation that the kerneldoc system warns about. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 1 + include/linux/regulator/driver.h | 40 +++++++++++++++++++++++++++++++++++++- include/linux/regulator/machine.h | 41 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 81 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index ea12c68c327f..fda44009024d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -656,6 +656,7 @@ static void print_constraints(struct regulator_dev *rdev) /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source + * @constraints: constraints to apply * * Allows platform initialisation code to define and constrain * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index e37d80561985..84c3737c2d26 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -24,7 +24,37 @@ struct regulator_init_data; /** * struct regulator_ops - regulator operations. * - * This struct describes regulator operations. + * This struct describes regulator operations which can be implemented by + * regulator chip drivers. + * + * @enable: Enable the regulator. + * @disable: Disable the regulator. + * @is_enabled: Return 1 if the reguator is enabled, 0 otherwise. + * + * @set_voltage: Set the voltage for the regulator within the range specified. + * The driver should select the voltage closest to min_uV. + * @get_voltage: Return the currently configured voltage for the regulator. + * + * @set_current: Set the current for the regulator within the range specified. + * The driver should select the current closest to min_uA. + * @get_current: Return the currently configured current for the regulator. + * + * @set_current_limit: Configure a limit for a current-limited regulator. + * @get_current_limit: Get the limit for a current-limited regulator. + * + * @set_mode: Set the operating mode for the regulator. + * @get_mode: Get the current operating mode for the regulator. + * @get_optimum_mode: Get the most efficient operating mode for the regulator + * when running with the specified parameters. + * + * @set_suspend_voltage: Set the voltage for the regulator when the system + * is suspended. + * @set_suspend_enable: Mark the regulator as enabled when the system is + * suspended. + * @set_suspend_disable: Mark the regulator as disabled when the system is + * suspended. + * @set_suspend_mode: Set the operating mode for the regulator when the + * system is suspended. */ struct regulator_ops { @@ -75,6 +105,14 @@ enum regulator_type { /** * struct regulator_desc - Regulator descriptor * + * Each regulator registered with the core is described with a structure of + * this type. + * + * @name: Identifying name for the regulator. + * @id: Numerical identifier for the regulator. + * @ops: Regulator operations table. + * @type: Indicates if the regulator is a voltage or current regulator. + * @owner: Module providing the regulator, used for refcounting. */ struct regulator_desc { const char *name; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index c6d69331a81e..3794773b23d2 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -44,6 +44,10 @@ struct regulator; * struct regulator_state - regulator state during low power syatem states * * This describes a regulators state during a system wide low power state. + * + * @uV: Operating voltage during suspend. + * @mode: Operating mode during suspend. + * @enabled: Enabled during suspend. */ struct regulator_state { int uV; /* suspend voltage */ @@ -55,6 +59,30 @@ struct regulator_state { * struct regulation_constraints - regulator operating constraints. * * This struct describes regulator and board/machine specific constraints. + * + * @name: Descriptive name for the constraints, used for display purposes. + * + * @min_uV: Smallest voltage consumers may set. + * @max_uV: Largest voltage consumers may set. + * + * @min_uA: Smallest consumers consumers may set. + * @max_uA: Largest current consumers may set. + * + * @valid_modes_mask: Mask of modes which may be configured by consumers. + * @valid_ops_mask: Operations which may be performed by consumers. + * + * @always_on: Set if the regulator should never be disabled. + * @boot_on: Set if the regulator is enabled when the system is initially + * started. + * @apply_uV: Apply the voltage constraint when initialising. + * + * @input_uV: Input voltage for regulator when supplied by another regulator. + * + * @state_disk: State for regulator when system is suspended in disk mode. + * @state_mem: State for regulator when system is suspended in mem mode. + * @state_standby: State for regulator when system is suspended in standby + * mode. + * @initial_state: Suspend state to set by default. */ struct regulation_constraints { @@ -93,6 +121,9 @@ struct regulation_constraints { * struct regulator_consumer_supply - supply -> device mapping * * This maps a supply name to a device. + * + * @dev: Device structure for the consumer. + * @supply: Name for the supply. */ struct regulator_consumer_supply { struct device *dev; /* consumer */ @@ -103,6 +134,16 @@ struct regulator_consumer_supply { * struct regulator_init_data - regulator platform initialisation data. * * Initialisation constraints, our supply and consumers supplies. + * + * @supply_regulator_dev: Parent regulator (if any). + * + * @constraints: Constraints. These must be specified for the regulator to + * be usable. + * @num_consumer_supplies: Number of consumer device supplies. + * @consumer_supplies: Consumer device supply configuration. + * + * @regulator_init: Callback invoked when the regulator has been registered. + * @driver_data: Data passed to regulator_init. */ struct regulator_init_data { struct device *supply_regulator_dev; /* or NULL for LINE */ -- cgit v1.2.3-58-ga151 From 0ba4887c6329043d6cee5b5b477cfe50c2b57674 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 8 Jan 2009 11:50:23 -0800 Subject: regulator: fix kernel-doc warnings Fix kernel-doc warnings in regulator/driver.h: Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'set_current' description in 'regulator_ops' Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'get_current' description in 'regulator_ops' Warning(linux-next-20090108//include/linux/regulator/driver.h:124): No description found for parameter 'irq' Signed-off-by: Randy Dunlap cc: Liam Girdwood cc: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 84c3737c2d26..2dae05705f13 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -29,16 +29,12 @@ struct regulator_init_data; * * @enable: Enable the regulator. * @disable: Disable the regulator. - * @is_enabled: Return 1 if the reguator is enabled, 0 otherwise. + * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. * * @set_voltage: Set the voltage for the regulator within the range specified. * The driver should select the voltage closest to min_uV. * @get_voltage: Return the currently configured voltage for the regulator. * - * @set_current: Set the current for the regulator within the range specified. - * The driver should select the current closest to min_uA. - * @get_current: Return the currently configured current for the regulator. - * * @set_current_limit: Configure a limit for a current-limited regulator. * @get_current_limit: Get the limit for a current-limited regulator. * @@ -111,6 +107,7 @@ enum regulator_type { * @name: Identifying name for the regulator. * @id: Numerical identifier for the regulator. * @ops: Regulator operations table. + * @irq: Interrupt number for the regulator. * @type: Indicates if the regulator is a voltage or current regulator. * @owner: Module providing the regulator, used for refcounting. */ -- cgit v1.2.3-58-ga151