From b32e724308300a6ecead0f4895f0452a06a4291d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 23 Nov 2011 12:04:08 -0300 Subject: [media] rc: Add support for decoding Sanyo protocol This protocol is found on Sanyo/Aiwa remotes. Tested with an Aiwa RC-7AS06 remote control. Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-map.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/media') diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 26a3bd0fe57c..183d701eb3ce 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -18,13 +18,15 @@ #define RC_TYPE_JVC (1 << 3) /* JVC protocol */ #define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ #define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */ +#define RC_TYPE_SANYO (1 << 6) /* Sanyo protocol */ #define RC_TYPE_MCE_KBD (1 << 29) /* RC6-ish MCE keyboard/mouse */ #define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */ #define RC_TYPE_OTHER (1u << 31) -#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \ - RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ - RC_TYPE_RC5_SZ | RC_TYPE_MCE_KBD | RC_TYPE_OTHER) +#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \ + RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ + RC_TYPE_RC5_SZ | RC_TYPE_SANYO | RC_TYPE_MCE_KBD | \ + RC_TYPE_OTHER) struct rc_map_table { u32 scancode; -- cgit v1.2.3-58-ga151 From c1026c580df130c1d1943fff99bae0bef2cafa7b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 16 Nov 2011 16:59:05 -0300 Subject: [media] omap3isp: Clarify the clk_pol field in platform data The field is used to select the polarity of the pixel clock signal. "Inverted" and "non inverted" are bad descriptions, specify instead on which clock edge the signals are sampled. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- include/media/omap3isp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/media') diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h index e917b1da6577..042849a34640 100644 --- a/include/media/omap3isp.h +++ b/include/media/omap3isp.h @@ -58,7 +58,7 @@ enum { * ISP_LANE_SHIFT_4 - CAMEXT[13:4] -> CAM[9:0] * ISP_LANE_SHIFT_6 - CAMEXT[13:6] -> CAM[7:0] * @clk_pol: Pixel clock polarity - * 0 - Non Inverted, 1 - Inverted + * 0 - Sample on rising edge, 1 - Sample on falling edge * @hs_pol: Horizontal synchronization polarity * 0 - Active high, 1 - Active low * @vs_pol: Vertical synchronization polarity -- cgit v1.2.3-58-ga151 From fa5034c667c224be48db31a0d043dba305e8e7a8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sat, 5 Nov 2011 18:42:01 -0300 Subject: [media] media: fix truncated entity specification When enumerating an entity, assign the entire entity specification instead of only the first two words. (This requires giving the specification union a name.) So far, no driver actually uses more than two words, but this will be needed for ALSA entities. Signed-off-by: Clemens Ladisch [laurent.pinchart@ideasonboard.com: Rename specification to info] Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/media-device.c | 3 +-- drivers/media/video/v4l2-dev.c | 4 ++-- drivers/media/video/v4l2-device.c | 4 ++-- include/media/media-entity.h | 2 +- 4 files changed, 6 insertions(+), 7 deletions(-) (limited to 'include/media') diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c index 6edc9ba81203..6f9eb94e85b3 100644 --- a/drivers/media/media-device.c +++ b/drivers/media/media-device.c @@ -108,8 +108,7 @@ static long media_device_enum_entities(struct media_device *mdev, u_ent.group_id = ent->group_id; u_ent.pads = ent->num_pads; u_ent.links = ent->num_links - ent->num_backlinks; - u_ent.v4l.major = ent->v4l.major; - u_ent.v4l.minor = ent->v4l.minor; + memcpy(&u_ent.raw, &ent->info, sizeof(ent->info)); if (copy_to_user(uent, &u_ent, sizeof(u_ent))) return -EFAULT; return 0; diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 6a07d283456b..96e9615663e9 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -701,8 +701,8 @@ int __video_register_device(struct video_device *vdev, int type, int nr, vdev->vfl_type != VFL_TYPE_SUBDEV) { vdev->entity.type = MEDIA_ENT_T_DEVNODE_V4L; vdev->entity.name = vdev->name; - vdev->entity.v4l.major = VIDEO_MAJOR; - vdev->entity.v4l.minor = vdev->minor; + vdev->entity.info.v4l.major = VIDEO_MAJOR; + vdev->entity.info.v4l.minor = vdev->minor; ret = media_device_register_entity(vdev->v4l2_dev->mdev, &vdev->entity); if (ret < 0) diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c index 0edd618b9ddf..1f203b85a637 100644 --- a/drivers/media/video/v4l2-device.c +++ b/drivers/media/video/v4l2-device.c @@ -234,8 +234,8 @@ int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) goto clean_up; } #if defined(CONFIG_MEDIA_CONTROLLER) - sd->entity.v4l.major = VIDEO_MAJOR; - sd->entity.v4l.minor = vdev->minor; + sd->entity.info.v4l.major = VIDEO_MAJOR; + sd->entity.info.v4l.minor = vdev->minor; #endif sd->devnode = vdev; } diff --git a/include/media/media-entity.h b/include/media/media-entity.h index cd8bca63a502..29e7bba78ffe 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -98,7 +98,7 @@ struct media_entity { /* Sub-device specifications */ /* Nothing needed yet */ - }; + } info; }; static inline u32 media_entity_type(struct media_entity *entity) -- cgit v1.2.3-58-ga151 From 22db44cb9cd67d56b02b2b5dceb10d3d1361b28b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 5 May 2011 15:39:25 -0300 Subject: [media] as3645a: Add driver for LED flash controller This patch adds the driver for the as3645a LED flash controller. This controller supports a high power led in flash and torch modes and an indicator light, sometimes also called privacy light. Signed-off-by: Laurent Pinchart Signed-off-by: Andy Shevchenko Signed-off-by: Nayden Kanchev Signed-off-by: Tuukka Toivonen Signed-off-by: Antti Koskipaa Signed-off-by: Stanimir Varbanov Signed-off-by: Vimarsh Zutshi Signed-off-by: Sakari Ailus Signed-off-by: Ivan T. Ivanov Signed-off-by: Mika Westerberg Signed-off-by: David Cohen Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 7 + drivers/media/video/Makefile | 1 + drivers/media/video/as3645a.c | 904 ++++++++++++++++++++++++++++++++++++++++++ include/media/as3645a.h | 71 ++++ 4 files changed, 983 insertions(+) create mode 100644 drivers/media/video/as3645a.c create mode 100644 include/media/as3645a.h (limited to 'include/media') diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 4e8a0c4bc000..0e4d241fc6e6 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -533,6 +533,13 @@ config VIDEO_ADP1653 This is a driver for the ADP1653 flash controller. It is used for example in Nokia N900. +config VIDEO_AS3645A + tristate "AS3645A flash driver support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + ---help--- + This is a driver for the AS3645A and LM3555 flash controllers. It has + build in control for flash, torch and indicator LEDs. + comment "Video improvement chips" config VIDEO_UPD64031A diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index ddeaa6c8ad9a..86aabd64383e 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o +obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o diff --git a/drivers/media/video/as3645a.c b/drivers/media/video/as3645a.c new file mode 100644 index 000000000000..ec859a580651 --- /dev/null +++ b/drivers/media/video/as3645a.c @@ -0,0 +1,904 @@ +/* + * drivers/media/video/as3645a.c - AS3645A and LM3555 flash controllers driver + * + * Copyright (C) 2008-2011 Nokia Corporation + * Copyright (c) 2011, Intel Corporation. + * + * Contact: Laurent Pinchart + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * TODO: + * - Check hardware FSTROBE control when sensor driver add support for this + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#define AS_TIMER_MS_TO_CODE(t) (((t) - 100) / 50) +#define AS_TIMER_CODE_TO_MS(c) (50 * (c) + 100) + +/* Register definitions */ + +/* Read-only Design info register: Reset state: xxxx 0001 */ +#define AS_DESIGN_INFO_REG 0x00 +#define AS_DESIGN_INFO_FACTORY(x) (((x) >> 4)) +#define AS_DESIGN_INFO_MODEL(x) ((x) & 0x0f) + +/* Read-only Version control register: Reset state: 0000 0000 + * for first engineering samples + */ +#define AS_VERSION_CONTROL_REG 0x01 +#define AS_VERSION_CONTROL_RFU(x) (((x) >> 4)) +#define AS_VERSION_CONTROL_VERSION(x) ((x) & 0x0f) + +/* Read / Write (Indicator and timer register): Reset state: 0000 1111 */ +#define AS_INDICATOR_AND_TIMER_REG 0x02 +#define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT 0 +#define AS_INDICATOR_AND_TIMER_VREF_SHIFT 4 +#define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT 6 + +/* Read / Write (Current set register): Reset state: 0110 1001 */ +#define AS_CURRENT_SET_REG 0x03 +#define AS_CURRENT_ASSIST_LIGHT_SHIFT 0 +#define AS_CURRENT_LED_DET_ON (1 << 3) +#define AS_CURRENT_FLASH_CURRENT_SHIFT 4 + +/* Read / Write (Control register): Reset state: 1011 0100 */ +#define AS_CONTROL_REG 0x04 +#define AS_CONTROL_MODE_SETTING_SHIFT 0 +#define AS_CONTROL_STROBE_ON (1 << 2) +#define AS_CONTROL_OUT_ON (1 << 3) +#define AS_CONTROL_EXT_TORCH_ON (1 << 4) +#define AS_CONTROL_STROBE_TYPE_EDGE (0 << 5) +#define AS_CONTROL_STROBE_TYPE_LEVEL (1 << 5) +#define AS_CONTROL_COIL_PEAK_SHIFT 6 + +/* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000 */ +#define AS_FAULT_INFO_REG 0x05 +#define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT (1 << 1) +#define AS_FAULT_INFO_INDICATOR_LED (1 << 2) +#define AS_FAULT_INFO_LED_AMOUNT (1 << 3) +#define AS_FAULT_INFO_TIMEOUT (1 << 4) +#define AS_FAULT_INFO_OVER_TEMPERATURE (1 << 5) +#define AS_FAULT_INFO_SHORT_CIRCUIT (1 << 6) +#define AS_FAULT_INFO_OVER_VOLTAGE (1 << 7) + +/* Boost register */ +#define AS_BOOST_REG 0x0d +#define AS_BOOST_CURRENT_DISABLE (0 << 0) +#define AS_BOOST_CURRENT_ENABLE (1 << 0) + +/* Password register is used to unlock boost register writing */ +#define AS_PASSWORD_REG 0x0f +#define AS_PASSWORD_UNLOCK_VALUE 0x55 + +enum as_mode { + AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT, +}; + +/* + * struct as3645a + * + * @subdev: V4L2 subdev + * @pdata: Flash platform data + * @power_lock: Protects power_count + * @power_count: Power reference count + * @led_mode: V4L2 flash LED mode + * @timeout: Flash timeout in microseconds + * @flash_current: Flash current (0=200mA ... 15=500mA). Maximum + * values are 400mA for two LEDs and 500mA for one LED. + * @assist_current: Torch/Assist light current (0=20mA, 1=40mA ... 7=160mA) + * @indicator_current: Indicator LED current (0=0mA, 1=2.5mA ... 4=10mA) + * @strobe_source: Flash strobe source (software or external) + */ +struct as3645a { + struct v4l2_subdev subdev; + const struct as3645a_platform_data *pdata; + + struct mutex power_lock; + int power_count; + + /* Controls */ + struct v4l2_ctrl_handler ctrls; + + enum v4l2_flash_led_mode led_mode; + unsigned int timeout; + u8 flash_current; + u8 assist_current; + u8 indicator_current; + enum v4l2_flash_strobe_source strobe_source; +}; + +#define to_as3645a(sd) container_of(sd, struct as3645a, subdev) + +/* Return negative errno else zero on success */ +static int as3645a_write(struct as3645a *flash, u8 addr, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + rval = i2c_smbus_write_byte_data(client, addr, val); + + dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val, + rval < 0 ? "fail" : "ok"); + + return rval; +} + +/* Return negative errno else a data byte received from the device. */ +static int as3645a_read(struct as3645a *flash, u8 addr) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + rval = i2c_smbus_read_byte_data(client, addr); + + dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval, + rval < 0 ? "fail" : "ok"); + + return rval; +} + +/* ----------------------------------------------------------------------------- + * Hardware configuration and trigger + */ + +/* + * as3645a_set_config - Set flash configuration registers + * @flash: The flash + * + * Configure the hardware with flash, assist and indicator currents, as well as + * flash timeout. + * + * Return 0 on success, or a negative error code if an I2C communication error + * occurred. + */ +static int as3645a_set_config(struct as3645a *flash) +{ + int ret; + u8 val; + + val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT) + | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT) + | AS_CURRENT_LED_DET_ON; + + ret = as3645a_write(flash, AS_CURRENT_SET_REG, val); + if (ret < 0) + return ret; + + val = AS_TIMER_MS_TO_CODE(flash->timeout / 1000) + << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT; + + val |= (flash->pdata->vref << AS_INDICATOR_AND_TIMER_VREF_SHIFT) + | ((flash->indicator_current ? flash->indicator_current - 1 : 0) + << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT); + + return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val); +} + +/* + * as3645a_set_control - Set flash control register + * @flash: The flash + * @mode: Desired output mode + * @on: Desired output state + * + * Configure the hardware with output mode and state. + * + * Return 0 on success, or a negative error code if an I2C communication error + * occurred. + */ +static int +as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on) +{ + u8 reg; + + /* Configure output parameters and operation mode. */ + reg = (flash->pdata->peak << AS_CONTROL_COIL_PEAK_SHIFT) + | (on ? AS_CONTROL_OUT_ON : 0) + | mode; + + if (flash->led_mode == V4L2_FLASH_LED_MODE_FLASH && + flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) { + reg |= AS_CONTROL_STROBE_TYPE_LEVEL + | AS_CONTROL_STROBE_ON; + } + + return as3645a_write(flash, AS_CONTROL_REG, reg); +} + +/* + * as3645a_set_output - Configure output and operation mode + * @flash: Flash controller + * @strobe: Strobe the flash (only valid in flash mode) + * + * Turn the LEDs output on/off and set the operation mode based on the current + * parameters. + * + * The AS3645A can't control the indicator LED independently of the flash/torch + * LED. If the flash controller is in V4L2_FLASH_LED_MODE_NONE mode, set the + * chip to indicator mode. Otherwise set it to assist light (torch) or flash + * mode. + * + * In indicator and assist modes, turn the output on/off based on the indicator + * and torch currents. In software strobe flash mode, turn the output on/off + * based on the strobe parameter. + */ +static int as3645a_set_output(struct as3645a *flash, bool strobe) +{ + enum as_mode mode; + bool on; + + switch (flash->led_mode) { + case V4L2_FLASH_LED_MODE_NONE: + on = flash->indicator_current != 0; + mode = AS_MODE_INDICATOR; + break; + case V4L2_FLASH_LED_MODE_TORCH: + on = true; + mode = AS_MODE_ASSIST; + break; + case V4L2_FLASH_LED_MODE_FLASH: + on = strobe; + mode = AS_MODE_FLASH; + break; + default: + BUG(); + } + + /* Configure output parameters and operation mode. */ + return as3645a_set_control(flash, mode, on); +} + +/* ----------------------------------------------------------------------------- + * V4L2 controls + */ + +static int as3645a_is_active(struct as3645a *flash) +{ + int ret; + + ret = as3645a_read(flash, AS_CONTROL_REG); + return ret < 0 ? ret : !!(ret & AS_CONTROL_OUT_ON); +} + +static int as3645a_read_fault(struct as3645a *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + /* NOTE: reading register clear fault status */ + rval = as3645a_read(flash, AS_FAULT_INFO_REG); + if (rval < 0) + return rval; + + if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) + dev_dbg(&client->dev, "Inductor Peak limit fault\n"); + + if (rval & AS_FAULT_INFO_INDICATOR_LED) + dev_dbg(&client->dev, "Indicator LED fault: " + "Short circuit or open loop\n"); + + dev_dbg(&client->dev, "%u connected LEDs\n", + rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1); + + if (rval & AS_FAULT_INFO_TIMEOUT) + dev_dbg(&client->dev, "Timeout fault\n"); + + if (rval & AS_FAULT_INFO_OVER_TEMPERATURE) + dev_dbg(&client->dev, "Over temperature fault\n"); + + if (rval & AS_FAULT_INFO_SHORT_CIRCUIT) + dev_dbg(&client->dev, "Short circuit fault\n"); + + if (rval & AS_FAULT_INFO_OVER_VOLTAGE) + dev_dbg(&client->dev, "Over voltage fault: " + "Indicates missing capacitor or open connection\n"); + + return rval; +} + +static int as3645a_get_ctrl(struct v4l2_ctrl *ctrl) +{ + struct as3645a *flash = + container_of(ctrl->handler, struct as3645a, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int value; + + switch (ctrl->id) { + case V4L2_CID_FLASH_FAULT: + value = as3645a_read_fault(flash); + if (value < 0) + return value; + + ctrl->cur.val = 0; + if (value & AS_FAULT_INFO_SHORT_CIRCUIT) + ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; + if (value & AS_FAULT_INFO_OVER_TEMPERATURE) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; + if (value & AS_FAULT_INFO_TIMEOUT) + ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; + if (value & AS_FAULT_INFO_OVER_VOLTAGE) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; + if (value & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_CURRENT; + if (value & AS_FAULT_INFO_INDICATOR_LED) + ctrl->cur.val |= V4L2_FLASH_FAULT_INDICATOR; + break; + + case V4L2_CID_FLASH_STROBE_STATUS: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) { + ctrl->cur.val = 0; + break; + } + + value = as3645a_is_active(flash); + if (value < 0) + return value; + + ctrl->cur.val = value; + break; + } + + dev_dbg(&client->dev, "G_CTRL %08x:%d\n", ctrl->id, ctrl->cur.val); + + return 0; +} + +static int as3645a_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct as3645a *flash = + container_of(ctrl->handler, struct as3645a, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int ret; + + dev_dbg(&client->dev, "S_CTRL %08x:%d\n", ctrl->id, ctrl->val); + + /* If a control that doesn't apply to the current mode is modified, + * we store the value and return immediately. The setting will be + * applied when the LED mode is changed. Otherwise we apply the setting + * immediately. + */ + + switch (ctrl->id) { + case V4L2_CID_FLASH_LED_MODE: + if (flash->indicator_current) + return -EBUSY; + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + flash->led_mode = ctrl->val; + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_STROBE_SOURCE: + flash->strobe_source = ctrl->val; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_STROBE: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + return as3645a_set_output(flash, true); + + case V4L2_CID_FLASH_STROBE_STOP: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_TIMEOUT: + flash->timeout = ctrl->val; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_INTENSITY: + flash->flash_current = (ctrl->val - AS3645A_FLASH_INTENSITY_MIN) + / AS3645A_FLASH_INTENSITY_STEP; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_TORCH_INTENSITY: + flash->assist_current = + (ctrl->val - AS3645A_TORCH_INTENSITY_MIN) + / AS3645A_TORCH_INTENSITY_STEP; + + /* Applies to torch mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_TORCH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_INDICATOR_INTENSITY: + if (flash->led_mode != V4L2_FLASH_LED_MODE_NONE) + return -EBUSY; + + flash->indicator_current = + (ctrl->val - AS3645A_INDICATOR_INTENSITY_MIN) + / AS3645A_INDICATOR_INTENSITY_STEP; + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + if ((ctrl->val == 0) == (ctrl->cur.val == 0)) + break; + + return as3645a_set_output(flash, false); + } + + return 0; +} + +static const struct v4l2_ctrl_ops as3645a_ctrl_ops = { + .g_volatile_ctrl = as3645a_get_ctrl, + .s_ctrl = as3645a_set_ctrl, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +/* Put device into know state. */ +static int as3645a_setup(struct as3645a *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int ret; + + /* clear errors */ + ret = as3645a_read(flash, AS_FAULT_INFO_REG); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "Fault info: %02x\n", ret); + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + ret = as3645a_set_output(flash, false); + if (ret < 0) + return ret; + + /* read status */ + ret = as3645a_read_fault(flash); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n", + as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG)); + dev_dbg(&client->dev, "AS_CURRENT_SET_REG: %02x\n", + as3645a_read(flash, AS_CURRENT_SET_REG)); + dev_dbg(&client->dev, "AS_CONTROL_REG: %02x\n", + as3645a_read(flash, AS_CONTROL_REG)); + + return ret & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0; +} + +static int __as3645a_set_power(struct as3645a *flash, int on) +{ + int ret; + + if (!on) + as3645a_set_control(flash, AS_MODE_EXT_TORCH, false); + + if (flash->pdata->set_power) { + ret = flash->pdata->set_power(&flash->subdev, on); + if (ret < 0) + return ret; + } + + if (!on) + return 0; + + ret = as3645a_setup(flash); + if (ret < 0) { + if (flash->pdata->set_power) + flash->pdata->set_power(&flash->subdev, 0); + } + + return ret; +} + +static int as3645a_set_power(struct v4l2_subdev *sd, int on) +{ + struct as3645a *flash = to_as3645a(sd); + int ret = 0; + + mutex_lock(&flash->power_lock); + + if (flash->power_count == !on) { + ret = __as3645a_set_power(flash, !!on); + if (ret < 0) + goto done; + } + + flash->power_count += on ? 1 : -1; + WARN_ON(flash->power_count < 0); + +done: + mutex_unlock(&flash->power_lock); + return ret; +} + +static int as3645a_registered(struct v4l2_subdev *sd) +{ + struct as3645a *flash = to_as3645a(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int rval, man, model, rfu, version; + const char *vendor; + + /* Power up the flash driver and read manufacturer ID, model ID, RFU + * and version. + */ + rval = as3645a_set_power(&flash->subdev, 1); + if (rval < 0) + return rval; + + rval = as3645a_read(flash, AS_DESIGN_INFO_REG); + if (rval < 0) + goto power_off; + + man = AS_DESIGN_INFO_FACTORY(rval); + model = AS_DESIGN_INFO_MODEL(rval); + + rval = as3645a_read(flash, AS_VERSION_CONTROL_REG); + if (rval < 0) + goto power_off; + + rfu = AS_VERSION_CONTROL_RFU(rval); + version = AS_VERSION_CONTROL_VERSION(rval); + + /* Verify the chip model and version. */ + if (model != 0x01 || rfu != 0x00) { + dev_err(&client->dev, "AS3645A not detected " + "(model %d rfu %d)\n", model, rfu); + rval = -ENODEV; + goto power_off; + } + + switch (man) { + case 1: + vendor = "AMS, Austria Micro Systems"; + break; + case 2: + vendor = "ADI, Analog Devices Inc."; + break; + case 3: + vendor = "NSC, National Semiconductor"; + break; + case 4: + vendor = "NXP"; + break; + case 5: + vendor = "TI, Texas Instrument"; + break; + default: + vendor = "Unknown"; + } + + dev_info(&client->dev, "Chip vendor: %s (%d) Version: %d\n", vendor, + man, version); + + rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE); + if (rval < 0) + goto power_off; + + rval = as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE); + if (rval < 0) + goto power_off; + + /* Setup default values. This makes sure that the chip is in a known + * state, in case the power rail can't be controlled. + */ + rval = as3645a_setup(flash); + +power_off: + as3645a_set_power(&flash->subdev, 0); + + return rval; +} + +static int as3645a_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return as3645a_set_power(sd, 1); +} + +static int as3645a_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return as3645a_set_power(sd, 0); +} + +static const struct v4l2_subdev_core_ops as3645a_core_ops = { + .s_power = as3645a_set_power, +}; + +static const struct v4l2_subdev_ops as3645a_ops = { + .core = &as3645a_core_ops, +}; + +static const struct v4l2_subdev_internal_ops as3645a_internal_ops = { + .registered = as3645a_registered, + .open = as3645a_open, + .close = as3645a_close, +}; + +/* ----------------------------------------------------------------------------- + * I2C driver + */ +#ifdef CONFIG_PM + +static int as3645a_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + int rval; + + if (flash->power_count == 0) + return 0; + + rval = __as3645a_set_power(flash, 0); + + dev_dbg(&client->dev, "Suspend %s\n", rval < 0 ? "failed" : "ok"); + + return rval; +} + +static int as3645a_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + int rval; + + if (flash->power_count == 0) + return 0; + + rval = __as3645a_set_power(flash, 1); + + dev_dbg(&client->dev, "Resume %s\n", rval < 0 ? "fail" : "ok"); + + return rval; +} + +#else + +#define as3645a_suspend NULL +#define as3645a_resume NULL + +#endif /* CONFIG_PM */ + +/* + * as3645a_init_controls - Create controls + * @flash: The flash + * + * The number of LEDs reported in platform data is used to compute default + * limits. Parameters passed through platform data can override those limits. + */ +static int as3645a_init_controls(struct as3645a *flash) +{ + const struct as3645a_platform_data *pdata = flash->pdata; + struct v4l2_ctrl *ctrl; + int maximum; + + v4l2_ctrl_handler_init(&flash->ctrls, 10); + + /* V4L2_CID_FLASH_LED_MODE */ + v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_LED_MODE, 2, ~7, + V4L2_FLASH_LED_MODE_NONE); + + /* V4L2_CID_FLASH_STROBE_SOURCE */ + v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_SOURCE, + pdata->ext_strobe ? 1 : 0, + pdata->ext_strobe ? ~3 : ~1, + V4L2_FLASH_STROBE_SOURCE_SOFTWARE); + + flash->strobe_source = V4L2_FLASH_STROBE_SOURCE_SOFTWARE; + + /* V4L2_CID_FLASH_STROBE */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); + + /* V4L2_CID_FLASH_STROBE_STOP */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); + + /* V4L2_CID_FLASH_STROBE_STATUS */ + ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_STATUS, 0, 1, 1, 1); + if (ctrl != NULL) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + /* V4L2_CID_FLASH_TIMEOUT */ + maximum = pdata->timeout_max; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_TIMEOUT, AS3645A_FLASH_TIMEOUT_MIN, + maximum, AS3645A_FLASH_TIMEOUT_STEP, maximum); + + flash->timeout = maximum; + + /* V4L2_CID_FLASH_INTENSITY */ + maximum = pdata->flash_max_current; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_INTENSITY, AS3645A_FLASH_INTENSITY_MIN, + maximum, AS3645A_FLASH_INTENSITY_STEP, maximum); + + flash->flash_current = (maximum - AS3645A_FLASH_INTENSITY_MIN) + / AS3645A_FLASH_INTENSITY_STEP; + + /* V4L2_CID_FLASH_TORCH_INTENSITY */ + maximum = pdata->torch_max_current; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_TORCH_INTENSITY, + AS3645A_TORCH_INTENSITY_MIN, maximum, + AS3645A_TORCH_INTENSITY_STEP, + AS3645A_TORCH_INTENSITY_MIN); + + flash->assist_current = 0; + + /* V4L2_CID_FLASH_INDICATOR_INTENSITY */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_INDICATOR_INTENSITY, + AS3645A_INDICATOR_INTENSITY_MIN, + AS3645A_INDICATOR_INTENSITY_MAX, + AS3645A_INDICATOR_INTENSITY_STEP, + AS3645A_INDICATOR_INTENSITY_MIN); + + flash->indicator_current = 0; + + /* V4L2_CID_FLASH_FAULT */ + ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_FAULT, 0, + V4L2_FLASH_FAULT_OVER_VOLTAGE | + V4L2_FLASH_FAULT_TIMEOUT | + V4L2_FLASH_FAULT_OVER_TEMPERATURE | + V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); + if (ctrl != NULL) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + flash->subdev.ctrl_handler = &flash->ctrls; + + return flash->ctrls.error; +} + +static int as3645a_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct as3645a *flash; + int ret; + + if (client->dev.platform_data == NULL) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_KERNEL); + if (flash == NULL) + return -ENOMEM; + + flash->pdata = client->dev.platform_data; + + v4l2_i2c_subdev_init(&flash->subdev, client, &as3645a_ops); + flash->subdev.internal_ops = &as3645a_internal_ops; + flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + ret = as3645a_init_controls(flash); + if (ret < 0) + goto done; + + ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); + if (ret < 0) + goto done; + + flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + + mutex_init(&flash->power_lock); + + flash->led_mode = V4L2_FLASH_LED_MODE_NONE; + +done: + if (ret < 0) { + v4l2_ctrl_handler_free(&flash->ctrls); + kfree(flash); + } + + return ret; +} + +static int __exit as3645a_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + + v4l2_device_unregister_subdev(subdev); + v4l2_ctrl_handler_free(&flash->ctrls); + media_entity_cleanup(&flash->subdev.entity); + mutex_destroy(&flash->power_lock); + kfree(flash); + + return 0; +} + +static const struct i2c_device_id as3645a_id_table[] = { + { AS3645A_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, as3645a_id_table); + +static const struct dev_pm_ops as3645a_pm_ops = { + .suspend = as3645a_suspend, + .resume = as3645a_resume, +}; + +static struct i2c_driver as3645a_i2c_driver = { + .driver = { + .name = AS3645A_NAME, + .pm = &as3645a_pm_ops, + }, + .probe = as3645a_probe, + .remove = __exit_p(as3645a_remove), + .id_table = as3645a_id_table, +}; + +static int __init as3645a_init(void) +{ + int rval; + + rval = i2c_add_driver(&as3645a_i2c_driver); + if (rval) + pr_err("%s: Failed to register the driver\n", AS3645A_NAME); + + return rval; +} + +static void __exit as3645a_exit(void) +{ + i2c_del_driver(&as3645a_i2c_driver); +} + +module_init(as3645a_init); +module_exit(as3645a_exit); + +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones"); +MODULE_LICENSE("GPL"); diff --git a/include/media/as3645a.h b/include/media/as3645a.h new file mode 100644 index 000000000000..5075496d2c9e --- /dev/null +++ b/include/media/as3645a.h @@ -0,0 +1,71 @@ +/* + * include/media/as3645a.h + * + * Copyright (C) 2008-2011 Nokia Corporation + * + * Contact: Laurent Pinchart + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __AS3645A_H__ +#define __AS3645A_H__ + +#include + +#define AS3645A_NAME "as3645a" +#define AS3645A_I2C_ADDR (0x60 >> 1) /* W:0x60, R:0x61 */ + +#define AS3645A_FLASH_TIMEOUT_MIN 100000 /* us */ +#define AS3645A_FLASH_TIMEOUT_MAX 850000 +#define AS3645A_FLASH_TIMEOUT_STEP 50000 + +#define AS3645A_FLASH_INTENSITY_MIN 200 /* mA */ +#define AS3645A_FLASH_INTENSITY_MAX_1LED 500 +#define AS3645A_FLASH_INTENSITY_MAX_2LEDS 400 +#define AS3645A_FLASH_INTENSITY_STEP 20 + +#define AS3645A_TORCH_INTENSITY_MIN 20 /* mA */ +#define AS3645A_TORCH_INTENSITY_MAX 160 +#define AS3645A_TORCH_INTENSITY_STEP 20 + +#define AS3645A_INDICATOR_INTENSITY_MIN 0 /* uA */ +#define AS3645A_INDICATOR_INTENSITY_MAX 10000 +#define AS3645A_INDICATOR_INTENSITY_STEP 2500 + +/* + * as3645a_platform_data - Flash controller platform data + * @set_power: Set power callback + * @vref: VREF offset (0=0V, 1=+0.3V, 2=-0.3V, 3=+0.6V) + * @peak: Inductor peak current limit (0=1.25A, 1=1.5A, 2=1.75A, 3=2.0A) + * @ext_strobe: True if external flash strobe can be used + * @flash_max_current: Max flash current (mA, <= AS3645A_FLASH_INTENSITY_MAX) + * @torch_max_current: Max torch current (mA, >= AS3645A_TORCH_INTENSITY_MAX) + * @timeout_max: Max flash timeout (us, <= AS3645A_FLASH_TIMEOUT_MAX) + */ +struct as3645a_platform_data { + int (*set_power)(struct v4l2_subdev *subdev, int on); + unsigned int vref; + unsigned int peak; + bool ext_strobe; + + /* Flash and torch currents and timeout limits */ + unsigned int flash_max_current; + unsigned int torch_max_current; + unsigned int timeout_max; +}; + +#endif /* __AS3645A_H__ */ -- cgit v1.2.3-58-ga151 From adddf86b4cf545b82e422a9897a377d7e55b50ee Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Wed, 4 Jan 2012 21:06:13 -0300 Subject: [media] cx25840: Add a flag to enable the CX23888 DIF to be enabled or not The CX23888 (HVR1850 and other new cards) contain a DIF which is responsible for demodulating the audio and video. It's built directly into the CX23888 PCIe bridge. It needs to be enabled and disabled on a per-card and per-input basis. We pass this flag from the cx23885 core driver to the sub-device when we need the cx25840 driver to enable/disable with the DIF correctly. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- include/media/cx25840.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/media') diff --git a/include/media/cx25840.h b/include/media/cx25840.h index 46d1a141208e..783c5bdd63eb 100644 --- a/include/media/cx25840.h +++ b/include/media/cx25840.h @@ -85,6 +85,7 @@ enum cx25840_video_input { CX25840_NONE1_CH3 = 0x800000c0, CX25840_SVIDEO_ON = 0x80000100, CX25840_COMPONENT_ON = 0x80000200, + CX25840_DIF_ON = 0x80000400, }; enum cx25840_audio_input { -- cgit v1.2.3-58-ga151 From 9a7f95ad1c946efdd7a7a72df27db738260a0fd8 Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Sat, 30 Apr 2011 03:01:40 -0300 Subject: [media] davinci vpbe: add dm365 VPBE display driver changes This patch implements the core additions to the display driver, mainly controlling the VENC and other encoders for dm365. This patch also includes addition of amplifier subdevice to the vpbe driver and interfacing with venc subdevice. Signed-off-by: Manjunath Hadli Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpbe.c | 48 +++++++++++++++++++++++++++++++++++--- include/media/davinci/vpbe.h | 16 +++++++++++++ 2 files changed, 61 insertions(+), 3 deletions(-) (limited to 'include/media') diff --git a/drivers/media/video/davinci/vpbe.c b/drivers/media/video/davinci/vpbe.c index d773d30de221..c12a714c080c 100644 --- a/drivers/media/video/davinci/vpbe.c +++ b/drivers/media/video/davinci/vpbe.c @@ -141,11 +141,12 @@ static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev, return 0; } -static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode) +static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode, + int output_index) { struct vpbe_config *cfg = vpbe_dev->cfg; struct vpbe_enc_mode_info var; - int curr_output = vpbe_dev->current_out_index; + int curr_output = output_index; int i; if (NULL == mode) @@ -245,6 +246,8 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) struct encoder_config_info *curr_enc_info = vpbe_current_encoder_info(vpbe_dev); struct vpbe_config *cfg = vpbe_dev->cfg; + struct venc_platform_data *venc_device = vpbe_dev->venc_device; + enum v4l2_mbus_pixelcode if_params; int enc_out_index; int sd_index; int ret = 0; @@ -274,6 +277,8 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) goto out; } + if_params = cfg->outputs[index].if_params; + venc_device->setup_if_config(if_params); if (ret) goto out; } @@ -293,7 +298,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) * encoder. */ ret = vpbe_get_mode_info(vpbe_dev, - cfg->outputs[index].default_mode); + cfg->outputs[index].default_mode, index); if (!ret) { struct osd_state *osd_device = vpbe_dev->osd_device; @@ -367,6 +372,11 @@ static int vpbe_s_dv_preset(struct vpbe_device *vpbe_dev, ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, s_dv_preset, dv_preset); + if (!ret && (vpbe_dev->amp != NULL)) { + /* Call amplifier subdevice */ + ret = v4l2_subdev_call(vpbe_dev->amp, video, + s_dv_preset, dv_preset); + } /* set the lcd controller output for the given mode */ if (!ret) { struct osd_state *osd_device = vpbe_dev->osd_device; @@ -566,6 +576,8 @@ static int platform_device_get(struct device *dev, void *data) if (strcmp("vpbe-osd", pdev->name) == 0) vpbe_dev->osd_device = platform_get_drvdata(pdev); + if (strcmp("vpbe-venc", pdev->name) == 0) + vpbe_dev->venc_device = dev_get_platdata(&pdev->dev); return 0; } @@ -584,6 +596,7 @@ static int platform_device_get(struct device *dev, void *data) static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) { struct encoder_config_info *enc_info; + struct amp_config_info *amp_info; struct v4l2_subdev **enc_subdev; struct osd_state *osd_device; struct i2c_adapter *i2c_adap; @@ -704,6 +717,32 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders" " currently not supported"); } + /* Add amplifier subdevice for dm365 */ + if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) && + vpbe_dev->cfg->amp != NULL) { + amp_info = vpbe_dev->cfg->amp; + if (amp_info->is_i2c) { + vpbe_dev->amp = v4l2_i2c_new_subdev_board( + &vpbe_dev->v4l2_dev, i2c_adap, + &_info->board_info, NULL); + if (!vpbe_dev->amp) { + v4l2_err(&vpbe_dev->v4l2_dev, + "amplifier %s failed to register", + amp_info->module_name); + ret = -ENODEV; + goto vpbe_fail_amp_register; + } + v4l2_info(&vpbe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + amp_info->module_name); + } else { + vpbe_dev->amp = NULL; + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers" + " currently not supported"); + } + } else { + vpbe_dev->amp = NULL; + } /* set the current encoder and output to that of venc by default */ vpbe_dev->current_sd_index = 0; @@ -731,6 +770,8 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) /* TBD handling of bootargs for default output and mode */ return 0; +vpbe_fail_amp_register: + kfree(vpbe_dev->amp); vpbe_fail_sd_register: kfree(vpbe_dev->encoders); vpbe_fail_v4l2_device: @@ -757,6 +798,7 @@ static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev) if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) clk_put(vpbe_dev->dac_clk); + kfree(vpbe_dev->amp); kfree(vpbe_dev->encoders); vpbe_dev->initialized = 0; /* disable vpss clocks */ diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h index 8b11fb037980..8bc1b3c0e679 100644 --- a/include/media/davinci/vpbe.h +++ b/include/media/davinci/vpbe.h @@ -63,6 +63,7 @@ struct vpbe_output { * output basis. If per mode is needed, we may have to move this to * mode_info structure */ + enum v4l2_mbus_pixelcode if_params; }; /* encoder configuration info */ @@ -74,6 +75,15 @@ struct encoder_config_info { struct i2c_board_info board_info; }; +/*amplifier configuration info */ +struct amp_config_info { + char module_name[32]; + /* Is this an i2c device ? */ + unsigned int is_i2c:1; + /* i2c subdevice board info */ + struct i2c_board_info board_info; +}; + /* structure for defining vpbe display subsystem components */ struct vpbe_config { char module_name[32]; @@ -84,6 +94,8 @@ struct vpbe_config { /* external encoder information goes here */ int num_ext_encoders; struct encoder_config_info *ext_encoders; + /* amplifier information goes here */ + struct amp_config_info *amp; int num_outputs; /* Order is venc outputs followed by LCD and then external encoders */ struct vpbe_output *outputs; @@ -158,6 +170,8 @@ struct vpbe_device { struct v4l2_subdev **encoders; /* current encoder index */ int current_sd_index; + /* external amplifier v4l2 subdevice */ + struct v4l2_subdev *amp; struct mutex lock; /* device initialized */ int initialized; @@ -165,6 +179,8 @@ struct vpbe_device { struct clk *dac_clk; /* osd_device pointer */ struct osd_state *osd_device; + /* venc device pointer */ + struct venc_platform_data *venc_device; /* * fields below are accessed by users of vpbe_device. Not the * ones above -- cgit v1.2.3-58-ga151 From 194ed21925032b366e693373ba9bde62fbbf16ed Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Sat, 10 Sep 2011 02:19:55 -0300 Subject: [media] davinci vpbe: add VENC block changes to enable dm365 and dm355 This patch implements necessary changes for enabling dm365 and dm355 hardware for vpbe. The patch contains additional HD mode support for dm365 (720p60, 1080i30) and appropriate register modifications based on version numbers. VPBE_VERSION_2 = dm365 specific VPBE_VERSION_3 = dm355 specific Signed-off-by: Manjunath Hadli Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpbe_venc.c | 205 ++++++++++++++++++++++++++++---- include/media/davinci/vpbe_venc.h | 4 + 2 files changed, 185 insertions(+), 24 deletions(-) (limited to 'include/media') diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/video/davinci/vpbe_venc.c index 03a3e5c65ee7..53c29943e91f 100644 --- a/drivers/media/video/davinci/vpbe_venc.c +++ b/drivers/media/video/davinci/vpbe_venc.c @@ -99,6 +99,8 @@ static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val) return val; } +#define VDAC_COMPONENT 0x543 +#define VDAC_S_VIDEO 0x210 /* This function sets the dac of the VPBE for various outputs */ static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index) @@ -109,11 +111,12 @@ static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index) venc_write(sd, VENC_DACSEL, 0); break; case 1: - v4l2_dbg(debug, 1, sd, "Setting output to S-Video\n"); - venc_write(sd, VENC_DACSEL, 0x210); + v4l2_dbg(debug, 1, sd, "Setting output to Component\n"); + venc_write(sd, VENC_DACSEL, VDAC_COMPONENT); break; - case 2: - venc_write(sd, VENC_DACSEL, 0x543); + case 2: + v4l2_dbg(debug, 1, sd, "Setting output to S-video\n"); + venc_write(sd, VENC_DACSEL, VDAC_S_VIDEO); break; default: return -EINVAL; @@ -124,6 +127,8 @@ static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index) static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable) { + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n"); if (benable) { @@ -155,7 +160,8 @@ static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable) /* Disable LCD output control (accepting default polarity) */ venc_write(sd, VENC_LCDOUT, 0); - venc_write(sd, VENC_CMPNT, 0x100); + if (pdata->venc_type != VPBE_VERSION_3) + venc_write(sd, VENC_CMPNT, 0x100); venc_write(sd, VENC_HSPLS, 0); venc_write(sd, VENC_HINT, 0); venc_write(sd, VENC_HSTART, 0); @@ -178,11 +184,14 @@ static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable) } } +#define VDAC_CONFIG_SD_V3 0x0E21A6B6 +#define VDAC_CONFIG_SD_V2 0x081141CF /* * setting NTSC mode */ static int venc_set_ntsc(struct v4l2_subdev *sd) { + u32 val; struct venc_state *venc = to_state(sd); struct venc_platform_data *pdata = venc->pdata; @@ -195,12 +204,22 @@ static int venc_set_ntsc(struct v4l2_subdev *sd) venc_enabledigitaloutput(sd, 0); - /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ - venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); - /* Set REC656 Mode */ - venc_write(sd, VENC_YCCCTL, 0x1); - venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ); - venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS); + if (pdata->venc_type == VPBE_VERSION_3) { + venc_write(sd, VENC_CLKCTL, 0x01); + venc_write(sd, VENC_VIDCTL, 0); + val = vdaccfg_write(sd, VDAC_CONFIG_SD_V3); + } else if (pdata->venc_type == VPBE_VERSION_2) { + venc_write(sd, VENC_CLKCTL, 0x01); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V2); + } else { + /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ + venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); + /* Set REC656 Mode */ + venc_write(sd, VENC_YCCCTL, 0x1); + venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS); + } venc_write(sd, VENC_VMOD, 0); venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), @@ -220,6 +239,7 @@ static int venc_set_ntsc(struct v4l2_subdev *sd) static int venc_set_pal(struct v4l2_subdev *sd) { struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; v4l2_dbg(debug, 2, sd, "venc_set_pal\n"); @@ -230,10 +250,20 @@ static int venc_set_pal(struct v4l2_subdev *sd) venc_enabledigitaloutput(sd, 0); - /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ - venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); - /* Set REC656 Mode */ - venc_write(sd, VENC_YCCCTL, 0x1); + if (pdata->venc_type == VPBE_VERSION_3) { + venc_write(sd, VENC_CLKCTL, 0x1); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V3); + } else if (pdata->venc_type == VPBE_VERSION_2) { + venc_write(sd, VENC_CLKCTL, 0x1); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V2); + } else { + /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ + venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); + /* Set REC656 Mode */ + venc_write(sd, VENC_YCCCTL, 0x1); + } venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT, VENC_SYNCCTL_OVD); @@ -252,6 +282,7 @@ static int venc_set_pal(struct v4l2_subdev *sd) return 0; } +#define VDAC_CONFIG_HD_V2 0x081141EF /* * venc_set_480p59_94 * @@ -263,6 +294,9 @@ static int venc_set_480p59_94(struct v4l2_subdev *sd) struct venc_platform_data *pdata = venc->pdata; v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n"); + if ((pdata->venc_type != VPBE_VERSION_1) && + (pdata->venc_type != VPBE_VERSION_2)) + return -EINVAL; /* Setup clock at VPSS & VENC for SD */ if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_480P59_94) < 0) @@ -270,12 +304,18 @@ static int venc_set_480p59_94(struct v4l2_subdev *sd) venc_enabledigitaloutput(sd, 0); + if (pdata->venc_type == VPBE_VERSION_2) + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); venc_write(sd, VENC_OSDCLK0, 0); venc_write(sd, VENC_OSDCLK1, 1); - venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, - VENC_VDPRO_DAFRQ); - venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, - VENC_VDPRO_DAUPS); + + if (pdata->venc_type == VPBE_VERSION_1) { + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, + VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, + VENC_VDPRO_DAUPS); + } + venc_write(sd, VENC_VMOD, 0); venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), VENC_VMOD_VIE); @@ -302,19 +342,27 @@ static int venc_set_576p50(struct v4l2_subdev *sd) v4l2_dbg(debug, 2, sd, "venc_set_576p50\n"); + if ((pdata->venc_type != VPBE_VERSION_1) && + (pdata->venc_type != VPBE_VERSION_2)) + return -EINVAL; /* Setup clock at VPSS & VENC for SD */ if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_576P50) < 0) return -EINVAL; venc_enabledigitaloutput(sd, 0); + if (pdata->venc_type == VPBE_VERSION_2) + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + venc_write(sd, VENC_OSDCLK0, 0); venc_write(sd, VENC_OSDCLK1, 1); - venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, - VENC_VDPRO_DAFRQ); - venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, - VENC_VDPRO_DAUPS); + if (pdata->venc_type == VPBE_VERSION_1) { + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, + VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, + VENC_VDPRO_DAUPS); + } venc_write(sd, VENC_VMOD, 0); venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), @@ -330,6 +378,63 @@ static int venc_set_576p50(struct v4l2_subdev *sd) return 0; } +/* + * venc_set_720p60_internal - Setup 720p60 in venc for dm365 only + */ +static int venc_set_720p60_internal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_720P60) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + venc_write(sd, VENC_VMOD, 0); + /* DM365 component HD mode */ + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_720P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + venc_write(sd, VENC_XHINTVL, 0); + return 0; +} + +/* + * venc_set_1080i30_internal - Setup 1080i30 in venc for dm365 only + */ +static int venc_set_1080i30_internal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_1080P30) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + + venc_write(sd, VENC_VMOD, 0); + /* DM365 component HD mode */ + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_1080I << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + venc_write(sd, VENC_XHINTVL, 0); + return 0; +} + static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) { v4l2_dbg(debug, 1, sd, "venc_s_std_output\n"); @@ -345,13 +450,30 @@ static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) static int venc_s_dv_preset(struct v4l2_subdev *sd, struct v4l2_dv_preset *dv_preset) { + struct venc_state *venc = to_state(sd); + int ret; + v4l2_dbg(debug, 1, sd, "venc_s_dv_preset\n"); if (dv_preset->preset == V4L2_DV_576P50) return venc_set_576p50(sd); else if (dv_preset->preset == V4L2_DV_480P59_94) return venc_set_480p59_94(sd); - + else if ((dv_preset->preset == V4L2_DV_720P60) && + (venc->pdata->venc_type == VPBE_VERSION_2)) { + /* TBD setup internal 720p mode here */ + ret = venc_set_720p60_internal(sd); + /* for DM365 VPBE, there is DAC inside */ + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + return ret; + } else if ((dv_preset->preset == V4L2_DV_1080I30) && + (venc->pdata->venc_type == VPBE_VERSION_2)) { + /* TBD setup internal 1080i mode here */ + ret = venc_set_1080i30_internal(sd); + /* for DM365 VPBE, there is DAC inside */ + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + return ret; + } return -EINVAL; } @@ -508,11 +630,41 @@ static int venc_probe(struct platform_device *pdev) goto release_venc_mem_region; } + if (venc->pdata->venc_type != VPBE_VERSION_1) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(venc->pdev, + "Unable to get VDAC_CONFIG address map\n"); + ret = -ENODEV; + goto unmap_venc_io; + } + + if (!request_mem_region(res->start, + resource_size(res), "venc")) { + dev_err(venc->pdev, + "Unable to reserve VDAC_CONFIG MMIO region\n"); + ret = -ENODEV; + goto unmap_venc_io; + } + + venc->vdaccfg_reg = ioremap_nocache(res->start, + resource_size(res)); + if (!venc->vdaccfg_reg) { + dev_err(venc->pdev, + "Unable to map VDAC_CONFIG IO space\n"); + ret = -ENODEV; + goto release_vdaccfg_mem_region; + } + } spin_lock_init(&venc->lock); platform_set_drvdata(pdev, venc); dev_notice(venc->pdev, "VENC sub device probe success\n"); return 0; +release_vdaccfg_mem_region: + release_mem_region(res->start, resource_size(res)); +unmap_venc_io: + iounmap(venc->venc_base); release_venc_mem_region: res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, resource_size(res)); @@ -529,6 +681,11 @@ static int venc_remove(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); iounmap((void *)venc->venc_base); release_mem_region(res->start, resource_size(res)); + if (venc->pdata->venc_type != VPBE_VERSION_1) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + iounmap((void *)venc->vdaccfg_reg); + release_mem_region(res->start, resource_size(res)); + } kfree(venc); return 0; diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h index 426c205831a2..6b57334f4029 100644 --- a/include/media/davinci/vpbe_venc.h +++ b/include/media/davinci/vpbe_venc.h @@ -29,10 +29,14 @@ struct venc_platform_data { enum vpbe_version venc_type; + int (*setup_pinmux)(enum v4l2_mbus_pixelcode if_type, + int field); int (*setup_clock)(enum vpbe_enc_timings_type type, unsigned int mode); + int (*setup_if_config)(enum v4l2_mbus_pixelcode pixcode); /* Number of LCD outputs supported */ int num_lcd_outputs; + struct vpbe_if_params *lcd_if_params; }; enum venc_ioctls { -- cgit v1.2.3-58-ga151 From a08d2c727153dc6cea1d5d54a43fd7d69c1467c3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 31 Dec 2011 07:45:39 -0300 Subject: [media] pwc: Remove driver specific ioctls This stems from the v4l1 era, with v4l2 everything can be done with standardized v4l2 API calls. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 9 - drivers/media/video/pwc/pwc-ctrl.c | 571 ----------------------------- drivers/media/video/pwc/pwc-dec23.c | 1 - drivers/media/video/pwc/pwc-if.c | 10 - drivers/media/video/pwc/pwc-kiara.h | 2 +- drivers/media/video/pwc/pwc-timon.h | 2 +- drivers/media/video/pwc/pwc-v4l.c | 12 - drivers/media/video/pwc/pwc.h | 36 +- include/media/pwc-ioctl.h | 323 ---------------- 9 files changed, 26 insertions(+), 940 deletions(-) delete mode 100644 include/media/pwc-ioctl.h (limited to 'include/media') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index b7d96e148393..821e3c29ec83 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -460,15 +460,6 @@ Who: Jean Delvare ---------------------------- -What: Support for driver specific ioctls in the pwc driver (everything - defined in media/pwc-ioctl.h) -When: 3.3 -Why: This stems from the v4l1 era, with v4l2 everything can be done with - standardized v4l2 API calls -Who: Hans de Goede - ----------------------------- - What: Software emulation of arbritary resolutions in the pwc driver When: 3.3 Why: The pwc driver claims to support any resolution between 160x120 diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index 2cf77001804d..684b7c50eea9 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -604,136 +604,6 @@ int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value) return r; } -static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) -{ - unsigned char buf[2]; - int ret; - - if (pdev->type < 730) { - *on_value = -1; - *off_value = -1; - return 0; - } - - ret = recv_control_msg(pdev, - GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - *on_value = buf[0] * 100; - *off_value = buf[1] * 100; - return 0; -} - -static int _pwc_mpt_reset(struct pwc_device *pdev, int flags) -{ - unsigned char buf; - int r; - - mutex_lock(&pdev->udevlock); - if (!pdev->udev) { - r = -ENODEV; - goto leave; - } - - buf = flags & 0x03; // only lower two bits are currently used - r = send_control_msg(pdev, - SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf)); -leave: - mutex_unlock(&pdev->udevlock); - return r; -} - -int pwc_mpt_reset(struct pwc_device *pdev, int flags) -{ - int ret; - ret = _pwc_mpt_reset(pdev, flags); - if (ret >= 0) { - pdev->pan_angle = 0; - pdev->tilt_angle = 0; - } - return ret; -} - -static int _pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) -{ - unsigned char buf[4]; - int r; - - mutex_lock(&pdev->udevlock); - if (!pdev->udev) { - r = -ENODEV; - goto leave; - } - - /* set new relative angle; angles are expressed in degrees * 100, - but cam as .5 degree resolution, hence divide by 200. Also - the angle must be multiplied by 64 before it's send to - the cam (??) - */ - pan = 64 * pan / 100; - tilt = -64 * tilt / 100; /* positive tilt is down, which is not what the user would expect */ - buf[0] = pan & 0xFF; - buf[1] = (pan >> 8) & 0xFF; - buf[2] = tilt & 0xFF; - buf[3] = (tilt >> 8) & 0xFF; - r = send_control_msg(pdev, - SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf)); -leave: - mutex_unlock(&pdev->udevlock); - return r; -} - -int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) -{ - int ret; - - /* check absolute ranges */ - if (pan < pdev->angle_range.pan_min || - pan > pdev->angle_range.pan_max || - tilt < pdev->angle_range.tilt_min || - tilt > pdev->angle_range.tilt_max) - return -ERANGE; - - /* go to relative range, check again */ - pan -= pdev->pan_angle; - tilt -= pdev->tilt_angle; - /* angles are specified in degrees * 100, thus the limit = 36000 */ - if (pan < -36000 || pan > 36000 || tilt < -36000 || tilt > 36000) - return -ERANGE; - - ret = _pwc_mpt_set_angle(pdev, pan, tilt); - if (ret >= 0) { - pdev->pan_angle += pan; - pdev->tilt_angle += tilt; - } - if (ret == -EPIPE) /* stall -> out of range */ - ret = -ERANGE; - return ret; -} - -static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *status) -{ - int ret; - unsigned char buf[5]; - - mutex_lock(&pdev->udevlock); - if (!pdev->udev) { - ret = -ENODEV; - goto leave; - } - - ret = recv_control_msg(pdev, - GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - goto leave; - status->status = buf[0] & 0x7; // 3 bits are used for reporting - status->time_pan = (buf[1] << 8) + buf[2]; - status->time_tilt = (buf[3] << 8) + buf[4]; -leave: - mutex_unlock(&pdev->udevlock); - return ret; -} - #ifdef CONFIG_USB_PWC_DEBUG int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) { @@ -758,444 +628,3 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) return 0; } #endif - - /* End of Add-Ons */ - /* ************************************************* */ - -/* Linux 2.5.something and 2.6 pass direct pointers to arguments of - ioctl() calls. With 2.4, you have to do tedious copy_from_user() - and copy_to_user() calls. With these macros we circumvent this, - and let me maintain only one source file. The functionality is - exactly the same otherwise. - */ - -/* define local variable for arg */ -#define ARG_DEF(ARG_type, ARG_name)\ - ARG_type *ARG_name = arg; -/* copy arg to local variable */ -#define ARG_IN(ARG_name) /* nothing */ -/* argument itself (referenced) */ -#define ARGR(ARG_name) (*ARG_name) -/* argument address */ -#define ARGA(ARG_name) ARG_name -/* copy local variable to arg */ -#define ARG_OUT(ARG_name) /* nothing */ - -/* - * Our ctrls use native values, but the old custom pwc ioctl interface expects - * values from 0 - 65535, define 2 helper functions to scale things. */ -static int pwc_ioctl_g_ctrl(struct v4l2_ctrl *ctrl) -{ - return v4l2_ctrl_g_ctrl(ctrl) * 65535 / ctrl->maximum; -} - -static int pwc_ioctl_s_ctrl(struct v4l2_ctrl *ctrl, int val) -{ - return v4l2_ctrl_s_ctrl(ctrl, val * ctrl->maximum / 65535); -} - -long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) -{ - long ret = 0; - - switch(cmd) { - case VIDIOCPWCRUSER: - ret = v4l2_ctrl_s_ctrl(pdev->restore_user, 0); - break; - - case VIDIOCPWCSUSER: - ret = v4l2_ctrl_s_ctrl(pdev->save_user, 0); - break; - - case VIDIOCPWCFACTORY: - ret = v4l2_ctrl_s_ctrl(pdev->restore_factory, 0); - break; - - case VIDIOCPWCSCQUAL: - { - ARG_DEF(int, qual) - - mutex_lock(&pdev->udevlock); - if (!pdev->udev) { - ret = -ENODEV; - goto leave; - } - - if (pdev->iso_init) { - ret = -EBUSY; - goto leave; - } - - ARG_IN(qual) - if (ARGR(qual) < 0 || ARGR(qual) > 3) - ret = -EINVAL; - else - ret = pwc_set_video_mode(pdev, - pdev->view.x, pdev->view.y, - pdev->vframes, ARGR(qual)); -leave: - mutex_unlock(&pdev->udevlock); - break; - } - - case VIDIOCPWCGCQUAL: - { - ARG_DEF(int, qual) - - ARGR(qual) = pdev->vcompression; - ARG_OUT(qual) - break; - } - - case VIDIOCPWCPROBE: - { - ARG_DEF(struct pwc_probe, probe) - - strcpy(ARGR(probe).name, pdev->vdev.name); - ARGR(probe).type = pdev->type; - ARG_OUT(probe) - break; - } - - case VIDIOCPWCGSERIAL: - { - ARG_DEF(struct pwc_serial, serial) - - strcpy(ARGR(serial).serial, pdev->serial); - ARG_OUT(serial) - break; - } - - case VIDIOCPWCSAGC: - { - ARG_DEF(int, agc) - ARG_IN(agc) - ret = v4l2_ctrl_s_ctrl(pdev->autogain, ARGR(agc) < 0); - if (ret == 0 && ARGR(agc) >= 0) - ret = pwc_ioctl_s_ctrl(pdev->gain, ARGR(agc)); - break; - } - - case VIDIOCPWCGAGC: - { - ARG_DEF(int, agc) - if (v4l2_ctrl_g_ctrl(pdev->autogain)) - ARGR(agc) = -1; - else - ARGR(agc) = pwc_ioctl_g_ctrl(pdev->gain); - ARG_OUT(agc) - break; - } - - case VIDIOCPWCSSHUTTER: - { - ARG_DEF(int, shutter) - ARG_IN(shutter) - ret = v4l2_ctrl_s_ctrl(pdev->exposure_auto, - /* Menu idx 0 = auto, idx 1 = manual */ - ARGR(shutter) >= 0); - if (ret == 0 && ARGR(shutter) >= 0) - ret = pwc_ioctl_s_ctrl(pdev->exposure, ARGR(shutter)); - break; - } - - case VIDIOCPWCSAWB: - { - ARG_DEF(struct pwc_whitebalance, wb) - ARG_IN(wb) - ret = v4l2_ctrl_s_ctrl(pdev->auto_white_balance, - ARGR(wb).mode); - if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL) - ret = pwc_ioctl_s_ctrl(pdev->red_balance, - ARGR(wb).manual_red); - if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL) - ret = pwc_ioctl_s_ctrl(pdev->blue_balance, - ARGR(wb).manual_blue); - break; - } - - case VIDIOCPWCGAWB: - { - ARG_DEF(struct pwc_whitebalance, wb) - ARGR(wb).mode = v4l2_ctrl_g_ctrl(pdev->auto_white_balance); - ARGR(wb).manual_red = ARGR(wb).read_red = - pwc_ioctl_g_ctrl(pdev->red_balance); - ARGR(wb).manual_blue = ARGR(wb).read_blue = - pwc_ioctl_g_ctrl(pdev->blue_balance); - ARG_OUT(wb) - break; - } - - case VIDIOCPWCSAWBSPEED: - { - ARG_DEF(struct pwc_wb_speed, wbs) - - if (ARGR(wbs).control_speed > 0) { - ret = pwc_ioctl_s_ctrl(pdev->awb_speed, - ARGR(wbs).control_speed); - } - if (ret == 0 && ARGR(wbs).control_delay > 0) { - ret = pwc_ioctl_s_ctrl(pdev->awb_delay, - ARGR(wbs).control_delay); - } - break; - } - - case VIDIOCPWCGAWBSPEED: - { - ARG_DEF(struct pwc_wb_speed, wbs) - - ARGR(wbs).control_speed = v4l2_ctrl_g_ctrl(pdev->awb_speed); - ARGR(wbs).control_delay = v4l2_ctrl_g_ctrl(pdev->awb_delay); - ARG_OUT(wbs) - break; - } - - case VIDIOCPWCSLED: - { - ARG_DEF(struct pwc_leds, leds) - - mutex_lock(&pdev->udevlock); - if (!pdev->udev) { - ret = -ENODEV; - break; - } - - ARG_IN(leds) - ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off); - - mutex_unlock(&pdev->udevlock); - break; - } - - - case VIDIOCPWCGLED: - { - ARG_DEF(struct pwc_leds, leds) - - mutex_lock(&pdev->udevlock); - if (!pdev->udev) { - ret = -ENODEV; - break; - } - - ret = pwc_get_leds(pdev, &ARGR(leds).led_on, &ARGR(leds).led_off); - ARG_OUT(leds) - - mutex_unlock(&pdev->udevlock); - break; - } - - case VIDIOCPWCSCONTOUR: - { - ARG_DEF(int, contour) - ARG_IN(contour) - ret = v4l2_ctrl_s_ctrl(pdev->autocontour, ARGR(contour) < 0); - if (ret == 0 && ARGR(contour) >= 0) - ret = pwc_ioctl_s_ctrl(pdev->contour, ARGR(contour)); - break; - } - - case VIDIOCPWCGCONTOUR: - { - ARG_DEF(int, contour) - if (v4l2_ctrl_g_ctrl(pdev->autocontour)) - ARGR(contour) = -1; - else - ARGR(contour) = pwc_ioctl_g_ctrl(pdev->contour); - ARG_OUT(contour) - break; - } - - case VIDIOCPWCSBACKLIGHT: - { - ARG_DEF(int, backlight) - ARG_IN(backlight) - ret = v4l2_ctrl_s_ctrl(pdev->backlight, ARGR(backlight)); - break; - } - - case VIDIOCPWCGBACKLIGHT: - { - ARG_DEF(int, backlight) - ARGR(backlight) = v4l2_ctrl_g_ctrl(pdev->backlight); - ARG_OUT(backlight) - break; - } - - case VIDIOCPWCSFLICKER: - { - ARG_DEF(int, flicker) - ARG_IN(flicker) - ret = v4l2_ctrl_s_ctrl(pdev->flicker, ARGR(flicker)); - break; - } - - case VIDIOCPWCGFLICKER: - { - ARG_DEF(int, flicker) - ARGR(flicker) = v4l2_ctrl_g_ctrl(pdev->flicker); - ARG_OUT(flicker) - break; - } - - case VIDIOCPWCSDYNNOISE: - { - ARG_DEF(int, dynnoise) - ARG_IN(dynnoise) - ret = v4l2_ctrl_s_ctrl(pdev->noise_reduction, ARGR(dynnoise)); - break; - } - - case VIDIOCPWCGDYNNOISE: - { - ARG_DEF(int, dynnoise) - ARGR(dynnoise) = v4l2_ctrl_g_ctrl(pdev->noise_reduction); - ARG_OUT(dynnoise); - break; - } - - case VIDIOCPWCGREALSIZE: - { - ARG_DEF(struct pwc_imagesize, size) - - ARGR(size).width = pdev->image.x; - ARGR(size).height = pdev->image.y; - ARG_OUT(size) - break; - } - - case VIDIOCPWCMPTRESET: - { - if (pdev->features & FEATURE_MOTOR_PANTILT) - { - ARG_DEF(int, flags) - - ARG_IN(flags) - ret = pwc_mpt_reset(pdev, ARGR(flags)); - } - else - { - ret = -ENXIO; - } - break; - } - - case VIDIOCPWCMPTGRANGE: - { - if (pdev->features & FEATURE_MOTOR_PANTILT) - { - ARG_DEF(struct pwc_mpt_range, range) - - ARGR(range) = pdev->angle_range; - ARG_OUT(range) - } - else - { - ret = -ENXIO; - } - break; - } - - case VIDIOCPWCMPTSANGLE: - { - int new_pan, new_tilt; - - if (pdev->features & FEATURE_MOTOR_PANTILT) - { - ARG_DEF(struct pwc_mpt_angles, angles) - - ARG_IN(angles) - /* The camera can only set relative angles, so - do some calculations when getting an absolute angle . - */ - if (ARGR(angles).absolute) - { - new_pan = ARGR(angles).pan; - new_tilt = ARGR(angles).tilt; - } - else - { - new_pan = pdev->pan_angle + ARGR(angles).pan; - new_tilt = pdev->tilt_angle + ARGR(angles).tilt; - } - ret = pwc_mpt_set_angle(pdev, new_pan, new_tilt); - } - else - { - ret = -ENXIO; - } - break; - } - - case VIDIOCPWCMPTGANGLE: - { - - if (pdev->features & FEATURE_MOTOR_PANTILT) - { - ARG_DEF(struct pwc_mpt_angles, angles) - - ARGR(angles).absolute = 1; - ARGR(angles).pan = pdev->pan_angle; - ARGR(angles).tilt = pdev->tilt_angle; - ARG_OUT(angles) - } - else - { - ret = -ENXIO; - } - break; - } - - case VIDIOCPWCMPTSTATUS: - { - if (pdev->features & FEATURE_MOTOR_PANTILT) - { - ARG_DEF(struct pwc_mpt_status, status) - - ret = pwc_mpt_get_status(pdev, ARGA(status)); - ARG_OUT(status) - } - else - { - ret = -ENXIO; - } - break; - } - - case VIDIOCPWCGVIDCMD: - { - ARG_DEF(struct pwc_video_command, vcmd); - - ARGR(vcmd).type = pdev->type; - ARGR(vcmd).release = pdev->release; - ARGR(vcmd).command_len = pdev->cmd_len; - memcpy(&ARGR(vcmd).command_buf, pdev->cmd_buf, pdev->cmd_len); - ARGR(vcmd).bandlength = pdev->vbandlength; - ARGR(vcmd).frame_size = pdev->frame_size; - ARG_OUT(vcmd) - break; - } - /* - case VIDIOCPWCGVIDTABLE: - { - ARG_DEF(struct pwc_table_init_buffer, table); - ARGR(table).len = pdev->cmd_len; - memcpy(&ARGR(table).buffer, pdev->decompress_data, pdev->decompressor->table_size); - ARG_OUT(table) - break; - } - */ - - default: - ret = -ENOIOCTLCMD; - break; - } - - if (ret > 0) - return 0; - return ret; -} - - -/* vim: set cinoptions= formatoptions=croql cindent shiftwidth=8 tabstop=8: */ diff --git a/drivers/media/video/pwc/pwc-dec23.c b/drivers/media/video/pwc/pwc-dec23.c index bce3d9bfd035..e531f85460c1 100644 --- a/drivers/media/video/pwc/pwc-dec23.c +++ b/drivers/media/video/pwc/pwc-dec23.c @@ -27,7 +27,6 @@ #include "pwc-timon.h" #include "pwc-kiara.h" #include "pwc-dec23.h" -#include #include #include diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index a66f60cb8c3b..963b4a55ec75 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -1058,16 +1058,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id pdev->vframes = default_fps; strcpy(pdev->serial, serial_number); pdev->features = features; - if (vendor_id == 0x046D && product_id == 0x08B5) { - /* Logitech QuickCam Orbit - The ranges have been determined experimentally; they may differ from cam to cam. - Also, the exact ranges left-right and up-down are different for my cam - */ - pdev->angle_range.pan_min = -7000; - pdev->angle_range.pan_max = 7000; - pdev->angle_range.tilt_min = -3000; - pdev->angle_range.tilt_max = 2500; - } pwc_construct(pdev); /* set min/max sizes correct */ mutex_init(&pdev->capt_file_lock); diff --git a/drivers/media/video/pwc/pwc-kiara.h b/drivers/media/video/pwc/pwc-kiara.h index 047dad8c15f7..8e02b7ac2139 100644 --- a/drivers/media/video/pwc/pwc-kiara.h +++ b/drivers/media/video/pwc/pwc-kiara.h @@ -27,7 +27,7 @@ #ifndef PWC_KIARA_H #define PWC_KIARA_H -#include +#include "pwc.h" #define PWC_FPS_MAX_KIARA 6 diff --git a/drivers/media/video/pwc/pwc-timon.h b/drivers/media/video/pwc/pwc-timon.h index a6e22224c95f..270c5b9010f6 100644 --- a/drivers/media/video/pwc/pwc-timon.h +++ b/drivers/media/video/pwc/pwc-timon.h @@ -42,7 +42,7 @@ #ifndef PWC_TIMON_H #define PWC_TIMON_H -#include +#include "pwc.h" #define PWC_FPS_MAX_TIMON 6 diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index c4dc820b9dd7..87457b53f495 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -1122,14 +1122,6 @@ static int pwc_log_status(struct file *file, void *priv) return 0; } -static long pwc_default(struct file *file, void *fh, bool valid_prio, - int cmd, void *arg) -{ - struct pwc_device *pdev = video_drvdata(file); - - return pwc_ioctl(pdev, cmd, arg); -} - const struct v4l2_ioctl_ops pwc_ioctl_ops = { .vidioc_querycap = pwc_querycap, .vidioc_enum_input = pwc_enum_input, @@ -1148,8 +1140,4 @@ const struct v4l2_ioctl_ops pwc_ioctl_ops = { .vidioc_log_status = pwc_log_status, .vidioc_enum_framesizes = pwc_enum_framesizes, .vidioc_enum_frameintervals = pwc_enum_frameintervals, - .vidioc_default = pwc_default, }; - - -/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */ diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index ae0b7bf12e07..19c692c186fe 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -45,8 +45,6 @@ #include #endif -#include - /* Version block */ #define PWC_VERSION "10.0.15" #define PWC_NAME "pwc" @@ -189,6 +187,30 @@ #define PT_RESET_CONTROL_FORMATTER 0x02 #define PT_STATUS_FORMATTER 0x03 +/* Enumeration of image sizes */ +#define PSZ_SQCIF 0x00 +#define PSZ_QSIF 0x01 +#define PSZ_QCIF 0x02 +#define PSZ_SIF 0x03 +#define PSZ_CIF 0x04 +#define PSZ_VGA 0x05 +#define PSZ_MAX 6 + +struct pwc_raw_frame { + __le16 type; /* type of the webcam */ + __le16 vbandlength; /* Size of 4 lines compressed (used by the + decompressor) */ + __u8 cmd[4]; /* the four byte of the command (in case of + nala, only the first 3 bytes is filled) */ + __u8 rawframe[0]; /* frame_size = H / 4 * vbandlength */ +} __packed; + +/* structure for transferring x & y coordinates */ +struct pwc_coord { + int x, y; /* guess what */ + int size; /* size, or offset */ +}; + /* intermediate buffers with raw data from the USB cam */ struct pwc_frame_buf { @@ -269,11 +291,6 @@ struct pwc_device struct pwc_coord image, view; /* image and viewport size */ struct pwc_coord offset; /* offset of the viewport */ - /*** motorized pan/tilt feature */ - struct pwc_mpt_range angle_range; - int pan_angle; /* in degrees * 100 */ - int tilt_angle; /* absolute angle; 0,0 is home */ - #ifdef CONFIG_USB_PWC_INPUT_EVDEV struct input_dev *button_dev; /* webcam snapshot button input */ char button_phys[64]; @@ -357,8 +374,6 @@ void pwc_construct(struct pwc_device *pdev); extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression); extern unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned int size); -extern int pwc_mpt_reset(struct pwc_device *pdev, int flags); -extern int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt); extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value); extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor); extern int send_control_msg(struct pwc_device *pdev, @@ -377,9 +392,6 @@ int pwc_init_controls(struct pwc_device *pdev); /* Power down or up the camera; not supported by all models */ extern void pwc_camera_power(struct pwc_device *pdev, int power); -/* Private ioctl()s; see pwc-ioctl.h */ -extern long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg); - extern const struct v4l2_ioctl_ops pwc_ioctl_ops; /** pwc-uncompress.c */ diff --git a/include/media/pwc-ioctl.h b/include/media/pwc-ioctl.h deleted file mode 100644 index 1ed1e616fe33..000000000000 --- a/include/media/pwc-ioctl.h +++ /dev/null @@ -1,323 +0,0 @@ -#ifndef PWC_IOCTL_H -#define PWC_IOCTL_H - -/* (C) 2001-2004 Nemosoft Unv. - (C) 2004-2006 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to . - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -/* This is pwc-ioctl.h belonging to PWC 10.0.10 - It contains structures and defines to communicate from user space - directly to the driver. - */ - -/* - Changes - 2001/08/03 Alvarado Added ioctl constants to access methods for - changing white balance and red/blue gains - 2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE - 2003/12/13 Nemosft Unv. Some modifications to make interfacing to - PWCX easier - 2006/01/01 Luc Saillard Add raw format definition - */ - -/* These are private ioctl() commands, specific for the Philips webcams. - They contain functions not found in other webcams, and settings not - specified in the Video4Linux API. - - The #define names are built up like follows: - VIDIOC VIDeo IOCtl prefix - PWC Philps WebCam - G optional: Get - S optional: Set - ... the function - */ - -#include - -/* Enumeration of image sizes */ -#define PSZ_SQCIF 0x00 -#define PSZ_QSIF 0x01 -#define PSZ_QCIF 0x02 -#define PSZ_SIF 0x03 -#define PSZ_CIF 0x04 -#define PSZ_VGA 0x05 -#define PSZ_MAX 6 - - -/* The frame rate is encoded in the video_window.flags parameter using - the upper 16 bits, since some flags are defined nowadays. The following - defines provide a mask and shift to filter out this value. - This value can also be passing using the private flag when using v4l2 and - VIDIOC_S_FMT ioctl. - - In 'Snapshot' mode the camera freezes its automatic exposure and colour - balance controls. - */ -#define PWC_FPS_SHIFT 16 -#define PWC_FPS_MASK 0x00FF0000 -#define PWC_FPS_FRMASK 0x003F0000 -#define PWC_FPS_SNAPSHOT 0x00400000 -#define PWC_QLT_MASK 0x03000000 -#define PWC_QLT_SHIFT 24 - - -/* structure for transferring x & y coordinates */ -struct pwc_coord -{ - int x, y; /* guess what */ - int size; /* size, or offset */ -}; - - -/* Used with VIDIOCPWCPROBE */ -struct pwc_probe -{ - char name[32]; - int type; -}; - -struct pwc_serial -{ - char serial[30]; /* String with serial number. Contains terminating 0 */ -}; - -/* pwc_whitebalance.mode values */ -#define PWC_WB_INDOOR 0 -#define PWC_WB_OUTDOOR 1 -#define PWC_WB_FL 2 -#define PWC_WB_MANUAL 3 -#define PWC_WB_AUTO 4 - -/* Used with VIDIOCPWC[SG]AWB (Auto White Balance). - Set mode to one of the PWC_WB_* values above. - *red and *blue are the respective gains of these colour components inside - the camera; range 0..65535 - When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read; - otherwise undefined. - 'read_red' and 'read_blue' are read-only. -*/ -struct pwc_whitebalance -{ - int mode; - int manual_red, manual_blue; /* R/W */ - int read_red, read_blue; /* R/O */ -}; - -/* - 'control_speed' and 'control_delay' are used in automatic whitebalance mode, - and tell the camera how fast it should react to changes in lighting, and - with how much delay. Valid values are 0..65535. -*/ -struct pwc_wb_speed -{ - int control_speed; - int control_delay; - -}; - -/* Used with VIDIOCPWC[SG]LED */ -struct pwc_leds -{ - int led_on; /* Led on-time; range = 0..25000 */ - int led_off; /* Led off-time; range = 0..25000 */ -}; - -/* Image size (used with GREALSIZE) */ -struct pwc_imagesize -{ - int width; - int height; -}; - -/* Defines and structures for Motorized Pan & Tilt */ -#define PWC_MPT_PAN 0x01 -#define PWC_MPT_TILT 0x02 -#define PWC_MPT_TIMEOUT 0x04 /* for status */ - -/* Set angles; when absolute != 0, the angle is absolute and the - driver calculates the relative offset for you. This can only - be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns - absolute angles. - */ -struct pwc_mpt_angles -{ - int absolute; /* write-only */ - int pan; /* degrees * 100 */ - int tilt; /* degress * 100 */ -}; - -/* Range of angles of the camera, both horizontally and vertically. - */ -struct pwc_mpt_range -{ - int pan_min, pan_max; /* degrees * 100 */ - int tilt_min, tilt_max; -}; - -struct pwc_mpt_status -{ - int status; - int time_pan; - int time_tilt; -}; - - -/* This is used for out-of-kernel decompression. With it, you can get - all the necessary information to initialize and use the decompressor - routines in standalone applications. - */ -struct pwc_video_command -{ - int type; /* camera type (645, 675, 730, etc.) */ - int release; /* release number */ - - int size; /* one of PSZ_* */ - int alternate; - int command_len; /* length of USB video command */ - unsigned char command_buf[13]; /* Actual USB video command */ - int bandlength; /* >0 = compressed */ - int frame_size; /* Size of one (un)compressed frame */ -}; - -/* Flags for PWCX subroutines. Not all modules honour all flags. */ -#define PWCX_FLAG_PLANAR 0x0001 -#define PWCX_FLAG_BAYER 0x0008 - - -/* IOCTL definitions */ - - /* Restore user settings */ -#define VIDIOCPWCRUSER _IO('v', 192) - /* Save user settings */ -#define VIDIOCPWCSUSER _IO('v', 193) - /* Restore factory settings */ -#define VIDIOCPWCFACTORY _IO('v', 194) - - /* You can manipulate the compression factor. A compression preference of 0 - means use uncompressed modes when available; 1 is low compression, 2 is - medium and 3 is high compression preferred. Of course, the higher the - compression, the lower the bandwidth used but more chance of artefacts - in the image. The driver automatically chooses a higher compression when - the preferred mode is not available. - */ - /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */ -#define VIDIOCPWCSCQUAL _IOW('v', 195, int) - /* Get preferred compression quality */ -#define VIDIOCPWCGCQUAL _IOR('v', 195, int) - - -/* Retrieve serial number of camera */ -#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial) - - /* This is a probe function; since so many devices are supported, it - becomes difficult to include all the names in programs that want to - check for the enhanced Philips stuff. So in stead, try this PROBE; - it returns a structure with the original name, and the corresponding - Philips type. - To use, fill the structure with zeroes, call PROBE and if that succeeds, - compare the name with that returned from VIDIOCGCAP; they should be the - same. If so, you can be assured it is a Philips (OEM) cam and the type - is valid. - */ -#define VIDIOCPWCPROBE _IOR('v', 199, struct pwc_probe) - - /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */ -#define VIDIOCPWCSAGC _IOW('v', 200, int) - /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */ -#define VIDIOCPWCGAGC _IOR('v', 200, int) - /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */ -#define VIDIOCPWCSSHUTTER _IOW('v', 201, int) - - /* Color compensation (Auto White Balance) */ -#define VIDIOCPWCSAWB _IOW('v', 202, struct pwc_whitebalance) -#define VIDIOCPWCGAWB _IOR('v', 202, struct pwc_whitebalance) - - /* Auto WB speed */ -#define VIDIOCPWCSAWBSPEED _IOW('v', 203, struct pwc_wb_speed) -#define VIDIOCPWCGAWBSPEED _IOR('v', 203, struct pwc_wb_speed) - - /* LEDs on/off/blink; int range 0..65535 */ -#define VIDIOCPWCSLED _IOW('v', 205, struct pwc_leds) -#define VIDIOCPWCGLED _IOR('v', 205, struct pwc_leds) - - /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */ -#define VIDIOCPWCSCONTOUR _IOW('v', 206, int) -#define VIDIOCPWCGCONTOUR _IOR('v', 206, int) - - /* Backlight compensation; 0 = off, otherwise on */ -#define VIDIOCPWCSBACKLIGHT _IOW('v', 207, int) -#define VIDIOCPWCGBACKLIGHT _IOR('v', 207, int) - - /* Flickerless mode; = 0 off, otherwise on */ -#define VIDIOCPWCSFLICKER _IOW('v', 208, int) -#define VIDIOCPWCGFLICKER _IOR('v', 208, int) - - /* Dynamic noise reduction; 0 off, 3 = high noise reduction */ -#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int) -#define VIDIOCPWCGDYNNOISE _IOR('v', 209, int) - - /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */ -#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize) - - /* Motorized pan & tilt functions */ -#define VIDIOCPWCMPTRESET _IOW('v', 211, int) -#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range) -#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles) -#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles) -#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status) - - /* Get the USB set-video command; needed for initializing libpwcx */ -#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command) -struct pwc_table_init_buffer { - int len; - char *buffer; - -}; -#define VIDIOCPWCGVIDTABLE _IOR('v', 216, struct pwc_table_init_buffer) - -/* - * This is private command used when communicating with v4l2. - * In the future all private ioctl will be remove/replace to - * use interface offer by v4l2. - */ - -#define V4L2_CID_PRIVATE_SAVE_USER (V4L2_CID_PRIVATE_BASE + 0) -#define V4L2_CID_PRIVATE_RESTORE_USER (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PRIVATE_RESTORE_FACTORY (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_PRIVATE_COLOUR_MODE (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_PRIVATE_AUTOCONTOUR (V4L2_CID_PRIVATE_BASE + 4) -#define V4L2_CID_PRIVATE_CONTOUR (V4L2_CID_PRIVATE_BASE + 5) -#define V4L2_CID_PRIVATE_BACKLIGHT (V4L2_CID_PRIVATE_BASE + 6) -#define V4L2_CID_PRIVATE_FLICKERLESS (V4L2_CID_PRIVATE_BASE + 7) -#define V4L2_CID_PRIVATE_NOISE_REDUCTION (V4L2_CID_PRIVATE_BASE + 8) - -struct pwc_raw_frame { - __le16 type; /* type of the webcam */ - __le16 vbandlength; /* Size of 4lines compressed (used by the decompressor) */ - __u8 cmd[4]; /* the four byte of the command (in case of nala, - only the first 3 bytes is filled) */ - __u8 rawframe[0]; /* frame_size = H/4*vbandlength */ -} __attribute__ ((packed)); - - -#endif -- cgit v1.2.3-58-ga151 From 8843d119eaf1a7a87a2cf8c3eadbd1937b16bc27 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 21 Sep 2011 17:52:51 -0300 Subject: [media] soc-camera: remove redundant parameter from .set_bus_param() The "pixfmt" parameter of the struct soc_camera_host_ops::set_bus_param() method is redundant, because at the time, when this method is called, pixfmt is guaranteed to be equal to icd->current_fmt->host_fmt->fourcc. Remove this parameter and update all drivers accordingly. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/atmel-isi.c | 2 +- drivers/media/video/mx1_camera.c | 2 +- drivers/media/video/mx2_camera.c | 3 +-- drivers/media/video/mx3_camera.c | 3 ++- drivers/media/video/omap1_camera.c | 4 ++-- drivers/media/video/pxa_camera.c | 3 ++- drivers/media/video/sh_mobile_ceu_camera.c | 11 ++--------- drivers/media/video/soc_camera.c | 2 +- include/media/soc_camera.h | 2 +- 9 files changed, 13 insertions(+), 19 deletions(-) (limited to 'include/media') diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c index fbc904f2f6fd..b25bd7bb01db 100644 --- a/drivers/media/video/atmel-isi.c +++ b/drivers/media/video/atmel-isi.c @@ -803,7 +803,7 @@ static int isi_camera_querycap(struct soc_camera_host *ici, return 0; } -static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt) +static int isi_camera_set_bus_param(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 18e94c7d2be8..055d11ddb038 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -487,7 +487,7 @@ static int mx1_camera_set_crop(struct soc_camera_device *icd, return v4l2_subdev_call(sd, video, s_crop, a); } -static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) +static int mx1_camera_set_bus_param(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index a803d9ea8fd6..ffbfbfe05169 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -766,8 +766,7 @@ static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, pcdev->base_emma + PRP_INTR_CNTL); } -static int mx2_camera_set_bus_param(struct soc_camera_device *icd, - __u32 pixfmt) +static int mx2_camera_set_bus_param(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index f96f92f00f92..ba004747ff01 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -982,12 +982,13 @@ static int mx3_camera_querycap(struct soc_camera_host *ici, return 0; } -static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) +static int mx3_camera_set_bus_param(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; + u32 pixfmt = icd->current_fmt->host_fmt->fourcc; unsigned long bus_flags, common_flags; u32 dw, sens_conf; const struct soc_mbus_pixelfmt *fmt; diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index 6a6cf388bae4..946ee55c018a 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -1436,13 +1436,13 @@ static int omap1_cam_querycap(struct soc_camera_host *ici, return 0; } -static int omap1_cam_set_bus_param(struct soc_camera_device *icd, - __u32 pixfmt) +static int omap1_cam_set_bus_param(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; struct soc_camera_host *ici = to_soc_camera_host(dev); struct omap1_cam_dev *pcdev = ici->priv; + u32 pixfmt = icd->current_fmt->host_fmt->fourcc; const struct soc_camera_format_xlate *xlate; const struct soc_mbus_pixelfmt *fmt; struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 79fb22c89ae9..2f9ae634b7cf 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1133,12 +1133,13 @@ static void pxa_camera_setup_cicr(struct soc_camera_device *icd, __raw_writel(cicr0, pcdev->base + CICR0); } -static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) +static int pxa_camera_set_bus_param(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; + u32 pixfmt = icd->current_fmt->host_fmt->fourcc; unsigned long bus_flags, common_flags; int ret; struct pxa_cam *cam = icd->host_priv; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index c51decfcae19..f854d85a387c 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -786,8 +786,7 @@ static struct v4l2_subdev *find_bus_subdev(struct sh_mobile_ceu_dev *pcdev, V4L2_MBUS_DATA_ACTIVE_HIGH) /* Capture is not running, no interrupts, no locking needed */ -static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, - __u32 pixfmt) +static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd) { struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; @@ -925,11 +924,6 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, ceu_write(pcdev, CDOCR, value); ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */ - dev_dbg(icd->parent, "S_FMT successful for %c%c%c%c %ux%u\n", - pixfmt & 0xff, (pixfmt >> 8) & 0xff, - (pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff, - icd->user_width, icd->user_height); - capture_restore(pcdev, capsr); /* not in bundle mode: skip CBDSR, CDAYR2, CDACR2, CDBYR2, CDBCR2 */ @@ -1966,8 +1960,7 @@ static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd, if (!ret) { icd->user_width = out_width & ~3; icd->user_height = out_height & ~3; - ret = sh_mobile_ceu_set_bus_param(icd, - icd->current_fmt->host_fmt->fourcc); + ret = sh_mobile_ceu_set_bus_param(icd); } } diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 62e4312515cb..a14df27d2552 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -487,7 +487,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd, icd->user_width, icd->user_height); /* set physical bus parameters */ - return ici->ops->set_bus_param(icd, pix->pixelformat); + return ici->ops->set_bus_param(icd); } static int soc_camera_open(struct file *file) diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 5fb2c3d10c05..b5c2b6cb0d81 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -94,7 +94,7 @@ struct soc_camera_host_ops { struct soc_camera_device *); int (*reqbufs)(struct soc_camera_device *, struct v4l2_requestbuffers *); int (*querycap)(struct soc_camera_host *, struct v4l2_capability *); - int (*set_bus_param)(struct soc_camera_device *, __u32); + int (*set_bus_param)(struct soc_camera_device *); int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *); int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *); int (*enum_fsizes)(struct soc_camera_device *, struct v4l2_frmsizeenum *); -- cgit v1.2.3-58-ga151 From d8ec0961ce5a9ddbece875c2b6fc028cb750df3a Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 8 Dec 2011 07:18:49 -0300 Subject: [media] atmel-isi: add code to enable/disable ISI_MCK clock This patch - add ISI_MCK clock enable/disable code. - change field name in isi_platform_data structure Signed-off-by: Josh Wu [g.liakhovetski@gmx.de: fix label names] Signed-off-by: Guennadi Liakhovetski Acked-by: Nicolas Ferre Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/atmel-isi.c | 31 +++++++++++++++++++++++++++++-- include/media/atmel-isi.h | 4 +++- 2 files changed, 32 insertions(+), 3 deletions(-) (limited to 'include/media') diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c index b25bd7bb01db..9fe4519176a4 100644 --- a/drivers/media/video/atmel-isi.c +++ b/drivers/media/video/atmel-isi.c @@ -90,7 +90,10 @@ struct atmel_isi { struct isi_dma_desc dma_desc[MAX_BUFFER_NUM]; struct completion complete; + /* ISI peripherial clock */ struct clk *pclk; + /* ISI_MCK, feed to camera sensor to generate pixel clock */ + struct clk *mck; unsigned int irq; struct isi_platform_data *pdata; @@ -766,6 +769,12 @@ static int isi_camera_add_device(struct soc_camera_device *icd) if (ret) return ret; + ret = clk_enable(isi->mck); + if (ret) { + clk_disable(isi->pclk); + return ret; + } + isi->icd = icd; dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n", icd->devnum); @@ -779,6 +788,7 @@ static void isi_camera_remove_device(struct soc_camera_device *icd) BUG_ON(icd != isi->icd); + clk_disable(isi->mck); clk_disable(isi->pclk); isi->icd = NULL; @@ -874,7 +884,7 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd) if (isi->pdata->has_emb_sync) cfg1 |= ISI_CFG1_EMB_SYNC; - if (isi->pdata->isi_full_mode) + if (isi->pdata->full_mode) cfg1 |= ISI_CFG1_FULL_MODE; isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); @@ -912,6 +922,7 @@ static int __devexit atmel_isi_remove(struct platform_device *pdev) isi->fb_descriptors_phys); iounmap(isi->regs); + clk_put(isi->mck); clk_put(isi->pclk); kfree(isi); @@ -930,7 +941,7 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev) struct isi_platform_data *pdata; pdata = dev->platform_data; - if (!pdata || !pdata->data_width_flags) { + if (!pdata || !pdata->data_width_flags || !pdata->mck_hz) { dev_err(&pdev->dev, "No config available for Atmel ISI\n"); return -EINVAL; @@ -959,6 +970,19 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev) INIT_LIST_HEAD(&isi->video_buffer_list); INIT_LIST_HEAD(&isi->dma_desc_head); + /* Get ISI_MCK, provided by programmable clock or external clock */ + isi->mck = clk_get(dev, "isi_mck"); + if (IS_ERR(isi->mck)) { + dev_err(dev, "Failed to get isi_mck\n"); + ret = PTR_ERR(isi->mck); + goto err_clk_get; + } + + /* Set ISI_MCK's frequency, it should be faster than pixel clock */ + ret = clk_set_rate(isi->mck, pdata->mck_hz); + if (ret < 0) + goto err_set_mck_rate; + isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev, sizeof(struct fbd) * MAX_BUFFER_NUM, &isi->fb_descriptors_phys, @@ -1034,6 +1058,9 @@ err_alloc_ctx: isi->p_fb_descriptors, isi->fb_descriptors_phys); err_alloc_descriptors: +err_set_mck_rate: + clk_put(isi->mck); +err_clk_get: kfree(isi); err_alloc_isi: clk_put(pclk); diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h index 26cece595121..656823075709 100644 --- a/include/media/atmel-isi.h +++ b/include/media/atmel-isi.h @@ -110,10 +110,12 @@ struct isi_platform_data { u8 hsync_act_low; u8 vsync_act_low; u8 pclk_act_falling; - u8 isi_full_mode; + u8 full_mode; u32 data_width_flags; /* Using for ISI_CFG1 */ u32 frate; + /* Using for ISI_MCK */ + u32 mck_hz; }; #endif /* __ATMEL_ISI_H__ */ -- cgit v1.2.3-58-ga151 From 0e8caaceff160ad821c83d798fc03812cb810560 Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski Date: Wed, 10 Aug 2011 10:37:47 -0300 Subject: [media] v4l: add support for selection api This patch introduces new api for a precise control of cropping and composing features for video devices. The new ioctls are VIDIOC_S_SELECTION and VIDIOC_G_SELECTION. Signed-off-by: Tomasz Stanislawski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-compat-ioctl32.c | 2 ++ drivers/media/video/v4l2-ioctl.c | 34 +++++++++++++++++++++++ include/linux/videodev2.h | 46 +++++++++++++++++++++++++++++++ include/media/v4l2-ioctl.h | 4 +++ 4 files changed, 86 insertions(+) (limited to 'include/media') diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index c68531b88279..af4419e6c658 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -985,6 +985,8 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_CROPCAP: case VIDIOC_G_CROP: case VIDIOC_S_CROP: + case VIDIOC_G_SELECTION: + case VIDIOC_S_SELECTION: case VIDIOC_G_JPEGCOMP: case VIDIOC_S_JPEGCOMP: case VIDIOC_QUERYSTD: diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 639abeee3392..072cfc1a166f 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -238,6 +238,8 @@ static const char *v4l2_ioctls[] = { [_IOC_NR(VIDIOC_CROPCAP)] = "VIDIOC_CROPCAP", [_IOC_NR(VIDIOC_G_CROP)] = "VIDIOC_G_CROP", [_IOC_NR(VIDIOC_S_CROP)] = "VIDIOC_S_CROP", + [_IOC_NR(VIDIOC_G_SELECTION)] = "VIDIOC_G_SELECTION", + [_IOC_NR(VIDIOC_S_SELECTION)] = "VIDIOC_S_SELECTION", [_IOC_NR(VIDIOC_G_JPEGCOMP)] = "VIDIOC_G_JPEGCOMP", [_IOC_NR(VIDIOC_S_JPEGCOMP)] = "VIDIOC_S_JPEGCOMP", [_IOC_NR(VIDIOC_QUERYSTD)] = "VIDIOC_QUERYSTD", @@ -1571,6 +1573,38 @@ static long __video_do_ioctl(struct file *file, ret = ops->vidioc_s_crop(file, fh, p); break; } + case VIDIOC_G_SELECTION: + { + struct v4l2_selection *p = arg; + + if (!ops->vidioc_g_selection) + break; + + dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names)); + + ret = ops->vidioc_g_selection(file, fh, p); + if (!ret) + dbgrect(vfd, "", &p->r); + break; + } + case VIDIOC_S_SELECTION: + { + struct v4l2_selection *p = arg; + + if (!ops->vidioc_s_selection) + break; + + if (ret_prio) { + ret = ret_prio; + break; + } + + dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names)); + dbgrect(vfd, "", &p->r); + + ret = ops->vidioc_s_selection(file, fh, p); + break; + } case VIDIOC_CROPCAP: { struct v4l2_cropcap *p = arg; diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index b2e1331ca76b..012a29604522 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -743,6 +743,48 @@ struct v4l2_crop { struct v4l2_rect c; }; +/* Hints for adjustments of selection rectangle */ +#define V4L2_SEL_FLAG_GE 0x00000001 +#define V4L2_SEL_FLAG_LE 0x00000002 + +/* Selection targets */ + +/* current cropping area */ +#define V4L2_SEL_TGT_CROP_ACTIVE 0 +/* default cropping area */ +#define V4L2_SEL_TGT_CROP_DEFAULT 1 +/* cropping bounds */ +#define V4L2_SEL_TGT_CROP_BOUNDS 2 +/* current composing area */ +#define V4L2_SEL_TGT_COMPOSE_ACTIVE 256 +/* default composing area */ +#define V4L2_SEL_TGT_COMPOSE_DEFAULT 257 +/* composing bounds */ +#define V4L2_SEL_TGT_COMPOSE_BOUNDS 258 +/* current composing area plus all padding pixels */ +#define V4L2_SEL_TGT_COMPOSE_PADDED 259 + +/** + * struct v4l2_selection - selection info + * @type: buffer type (do not use *_MPLANE types) + * @target: selection target, used to choose one of possible rectangles + * @flags: constraints flags + * @r: coordinates of selection window + * @reserved: for future use, rounds structure size to 64 bytes, set to zero + * + * Hardware may use multiple helper window to process a video stream. + * The structure is used to exchange this selection areas between + * an application and a driver. + */ +struct v4l2_selection { + __u32 type; + __u32 target; + __u32 flags; + struct v4l2_rect r; + __u32 reserved[9]; +}; + + /* * A N A L O G V I D E O S T A N D A R D */ @@ -2259,6 +2301,10 @@ struct v4l2_create_buffers { #define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers) #define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer) +/* Experimental selection API */ +#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection) +#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index 4d1c74ad4c84..3f5d60fc5df6 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -196,6 +196,10 @@ struct v4l2_ioctl_ops { struct v4l2_crop *a); int (*vidioc_s_crop) (struct file *file, void *fh, struct v4l2_crop *a); + int (*vidioc_g_selection) (struct file *file, void *fh, + struct v4l2_selection *s); + int (*vidioc_s_selection) (struct file *file, void *fh, + struct v4l2_selection *s); /* Compression ioctls */ int (*vidioc_g_jpegcomp) (struct file *file, void *fh, struct v4l2_jpegcompression *a); -- cgit v1.2.3-58-ga151 From 0963119fca6ad250146fd7d27eb90f205e188beb Mon Sep 17 00:00:00 2001 From: Samuel Rakitnican Date: Fri, 6 Jan 2012 17:34:53 -0300 Subject: [media] rc-videomate-m1f.c Rename to match remote controler name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This remote was added with support for card Compro VideoMate M1F. This remote is shipped with various Compro cards, not this one only. Furthermore this remote can be bought separately under name Compro VideoMate K100. http://compro.com.tw/en/product/k100/k100.html So give it a proper name. [mchehab@redhat.com: Fix the Makefile] Signed-off-by: Samuel Rakitničan Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/keymaps/rc-videomate-m1f.c | 24 ++++++++++++------------ drivers/media/video/saa7134/saa7134-input.c | 2 +- include/media/rc-map.h | 2 +- 3 files changed, 14 insertions(+), 14 deletions(-) (limited to 'include/media') diff --git a/drivers/media/rc/keymaps/rc-videomate-m1f.c b/drivers/media/rc/keymaps/rc-videomate-m1f.c index 3bd1de1f585c..23ee05e53949 100644 --- a/drivers/media/rc/keymaps/rc-videomate-m1f.c +++ b/drivers/media/rc/keymaps/rc-videomate-m1f.c @@ -1,4 +1,4 @@ -/* videomate-m1f.h - Keytable for videomate_m1f Remote Controller +/* videomate-k100.h - Keytable for videomate_k100 Remote Controller * * keymap imported from ir-keymaps.c * @@ -13,7 +13,7 @@ #include #include -static struct rc_map_table videomate_m1f[] = { +static struct rc_map_table videomate_k100[] = { { 0x01, KEY_POWER }, { 0x31, KEY_TUNER }, { 0x33, KEY_VIDEO }, @@ -67,27 +67,27 @@ static struct rc_map_table videomate_m1f[] = { { 0x18, KEY_TEXT }, }; -static struct rc_map_list videomate_m1f_map = { +static struct rc_map_list videomate_k100_map = { .map = { - .scan = videomate_m1f, - .size = ARRAY_SIZE(videomate_m1f), + .scan = videomate_k100, + .size = ARRAY_SIZE(videomate_k100), .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ - .name = RC_MAP_VIDEOMATE_M1F, + .name = RC_MAP_VIDEOMATE_K100, } }; -static int __init init_rc_map_videomate_m1f(void) +static int __init init_rc_map_videomate_k100(void) { - return rc_map_register(&videomate_m1f_map); + return rc_map_register(&videomate_k100_map); } -static void __exit exit_rc_map_videomate_m1f(void) +static void __exit exit_rc_map_videomate_k100(void) { - rc_map_unregister(&videomate_m1f_map); + rc_map_unregister(&videomate_k100_map); } -module_init(init_rc_map_videomate_m1f) -module_exit(exit_rc_map_videomate_m1f) +module_init(init_rc_map_videomate_k100) +module_exit(exit_rc_map_videomate_k100) MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pavel Osnova "); diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 1b15b0db7883..22ecd7297d2d 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -755,7 +755,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) polling = 50; /* ms */ break; case SAA7134_BOARD_VIDEOMATE_M1F: - ir_codes = RC_MAP_VIDEOMATE_M1F; + ir_codes = RC_MAP_VIDEOMATE_K100; mask_keycode = 0x0ff00; mask_keyup = 0x040000; break; diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 183d701eb3ce..f688bde61228 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -147,7 +147,7 @@ void rc_map_init(void); #define RC_MAP_TREKSTOR "rc-trekstor" #define RC_MAP_TT_1500 "rc-tt-1500" #define RC_MAP_TWINHAN_VP1027_DVBS "rc-twinhan1027" -#define RC_MAP_VIDEOMATE_M1F "rc-videomate-m1f" +#define RC_MAP_VIDEOMATE_K100 "rc-videomate-k100" #define RC_MAP_VIDEOMATE_S350 "rc-videomate-s350" #define RC_MAP_VIDEOMATE_TV_PVR "rc-videomate-tv-pvr" #define RC_MAP_WINFAST "rc-winfast" -- cgit v1.2.3-58-ga151