From 617f5db1a626f18d5cbb7c7faf7bf8f9ea12be78 Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Mon, 5 Jun 2023 13:33:26 +0300 Subject: RDMA/mlx5: Fix affinity assignment The cited commit aimed to ensure that Virtual Functions (VFs) assign a queue affinity to a Queue Pair (QP) to distribute traffic when the LAG master creates a hardware LAG. If the affinity was set while the hardware was not in LAG, the firmware would ignore the affinity value. However, this commit unintentionally assigned an affinity to QPs on the LAG master's VPORT even if the RDMA device was not marked as LAG-enabled. In most cases, this was not an issue because when the hardware entered hardware LAG configuration, the RDMA device of the LAG master would be destroyed and a new one would be created, marked as LAG-enabled. The problem arises when a user configures Equal-Cost Multipath (ECMP). In ECMP mode, traffic can be directed to different physical ports based on the queue affinity, which is intended for use by VPORTS other than the E-Switch manager. ECMP mode is supported only if both E-Switch managers are in switchdev mode and the appropriate route is configured via IP. In this configuration, the RDMA device is not destroyed, and we retain the RDMA device that is not marked as LAG-enabled. To ensure correct behavior, Send Queues (SQs) opened by the E-Switch manager through verbs should be assigned strict affinity. This means they will only be able to communicate through the native physical port associated with the E-Switch manager. This will prevent the firmware from assigning affinity and will not allow the SQs to be remapped in case of failover. Fixes: 802dcc7fc5ec ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode") Reviewed-by: Maor Gottlieb Signed-off-by: Mark Bloch Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky --- include/linux/mlx5/driver.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index a4c4f737f9c1..8ad16b779898 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -1237,6 +1237,18 @@ static inline u16 mlx5_core_max_vfs(const struct mlx5_core_dev *dev) return dev->priv.sriov.max_vfs; } +static inline int mlx5_lag_is_lacp_owner(struct mlx5_core_dev *dev) +{ + /* LACP owner conditions: + * 1) Function is physical. + * 2) LAG is supported by FW. + * 3) LAG is managed by driver (currently the only option). + */ + return MLX5_CAP_GEN(dev, vport_group_manager) && + (MLX5_CAP_GEN(dev, num_lag_ports) > 1) && + MLX5_CAP_GEN(dev, lag_master); +} + static inline int mlx5_get_gid_table_len(u16 param) { if (param > 4) { -- cgit v1.2.3-58-ga151