From 6fb1b1e18fe3d141c54182c5d5b3af823bed455f Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 19 Mar 2011 13:55:39 +0100
Subject: ath9k: add support for overriding the MAC address through platform
 data

On some devices the correct MAC address is not in the EEPROM data, but
stored somewhere else.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ath9k_platform.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/linux')

diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h
index b847fc7b93f9..b5f06583a1ba 100644
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -23,6 +23,7 @@
 
 struct ath9k_platform_data {
 	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+	u8 *macaddr;
 };
 
 #endif /* _LINUX_ATH9K_PLATFORM_H */
-- 
cgit v1.2.3-58-ga151


From 6de66dd963ddd669667a81a2401f2fd6472ff55c Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 19 Mar 2011 13:55:40 +0100
Subject: ath9k: add support for overriding LED pin and GPIO settings from
 platform data

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/gpio.c | 14 ++++++++------
 drivers/net/wireless/ath/ath9k/hw.h   |  2 +-
 drivers/net/wireless/ath/ath9k/init.c |  8 +++++++-
 include/linux/ath9k_platform.h        |  4 ++++
 4 files changed, 20 insertions(+), 8 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 0fb8f8ac275a..44a0a886124d 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -41,12 +41,14 @@ void ath_init_leds(struct ath_softc *sc)
 {
 	int ret;
 
-	if (AR_SREV_9287(sc->sc_ah))
-		sc->sc_ah->led_pin = ATH_LED_PIN_9287;
-	else if (AR_SREV_9485(sc->sc_ah))
-		sc->sc_ah->led_pin = ATH_LED_PIN_9485;
-	else
-		sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
+	if (sc->sc_ah->led_pin < 0) {
+		if (AR_SREV_9287(sc->sc_ah))
+			sc->sc_ah->led_pin = ATH_LED_PIN_9287;
+		else if (AR_SREV_9485(sc->sc_ah))
+			sc->sc_ah->led_pin = ATH_LED_PIN_9485;
+		else
+			sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
+	}
 
 	/* Configure gpio 1 for output */
 	ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 775c0eb10b95..3d9fc6e391a7 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -798,7 +798,7 @@ struct ath_hw {
 	u32 originalGain[22];
 	int initPDADC;
 	int PDADCdelta;
-	u8 led_pin;
+	int led_pin;
 	u32 gpio_mask;
 	u32 gpio_val;
 
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index e22e8215d941..cdb0f1c89a0e 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -553,8 +553,14 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 	ah->hw_version.subsysid = subsysid;
 	sc->sc_ah = ah;
 
-	if (!pdata)
+	if (!pdata) {
 		ah->ah_flags |= AH_USE_EEPROM;
+		sc->sc_ah->led_pin = -1;
+	} else {
+		sc->sc_ah->gpio_mask = pdata->gpio_mask;
+		sc->sc_ah->gpio_val = pdata->gpio_val;
+		sc->sc_ah->led_pin = pdata->led_pin;
+	}
 
 	common = ath9k_hw_common(ah);
 	common->ops = &ath9k_common_ops;
diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h
index b5f06583a1ba..020387a114e3 100644
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -24,6 +24,10 @@
 struct ath9k_platform_data {
 	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
 	u8 *macaddr;
+
+	int led_pin;
+	u32 gpio_mask;
+	u32 gpio_val;
 };
 
 #endif /* _LINUX_ATH9K_PLATFORM_H */
-- 
cgit v1.2.3-58-ga151


From 6cb6a27c45cec9184302c2e350b3593c64bc7f6c Mon Sep 17 00:00:00 2001
From: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Date: Sat, 2 Apr 2011 22:48:47 -0700
Subject: net: Call netdev_features_change() from netdev_update_features()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Issue FEAT_CHANGE notification when features are changed by
netdev_update_features().  This will allow changes made by extra constraints
on e.g. MTU change to be properly propagated like changes via ethtool.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h |  1 +
 net/core/dev.c            | 23 +++++++++++++++++------
 net/core/ethtool.c        |  6 +++---
 3 files changed, 21 insertions(+), 9 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5eeb2cd3631c..423a5447d2ed 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2550,6 +2550,7 @@ static inline u32 netdev_get_wanted_features(struct net_device *dev)
 }
 u32 netdev_increment_features(u32 all, u32 one, u32 mask);
 u32 netdev_fix_features(struct net_device *dev, u32 features);
+int __netdev_update_features(struct net_device *dev);
 void netdev_update_features(struct net_device *dev);
 
 void netif_stacked_transfer_operstate(const struct net_device *rootdev,
diff --git a/net/core/dev.c b/net/core/dev.c
index 3da9fb06d47a..02f56376fe99 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5236,7 +5236,7 @@ u32 netdev_fix_features(struct net_device *dev, u32 features)
 }
 EXPORT_SYMBOL(netdev_fix_features);
 
-void netdev_update_features(struct net_device *dev)
+int __netdev_update_features(struct net_device *dev)
 {
 	u32 features;
 	int err = 0;
@@ -5250,7 +5250,7 @@ void netdev_update_features(struct net_device *dev)
 	features = netdev_fix_features(dev, features);
 
 	if (dev->features == features)
-		return;
+		return 0;
 
 	netdev_info(dev, "Features changed: 0x%08x -> 0x%08x\n",
 		dev->features, features);
@@ -5258,12 +5258,23 @@ void netdev_update_features(struct net_device *dev)
 	if (dev->netdev_ops->ndo_set_features)
 		err = dev->netdev_ops->ndo_set_features(dev, features);
 
-	if (!err)
-		dev->features = features;
-	else if (err < 0)
+	if (unlikely(err < 0)) {
 		netdev_err(dev,
 			"set_features() failed (%d); wanted 0x%08x, left 0x%08x\n",
 			err, features, dev->features);
+		return -1;
+	}
+
+	if (!err)
+		dev->features = features;
+
+	return 1;
+}
+
+void netdev_update_features(struct net_device *dev)
+{
+	if (__netdev_update_features(dev))
+		netdev_features_change(dev);
 }
 EXPORT_SYMBOL(netdev_update_features);
 
@@ -5430,7 +5441,7 @@ int register_netdevice(struct net_device *dev)
 		goto err_uninit;
 	dev->reg_state = NETREG_REGISTERED;
 
-	netdev_update_features(dev);
+	__netdev_update_features(dev);
 
 	/*
 	 *	Default initial state at registry is that the
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 74ead9eca126..439e4b0e1312 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -317,7 +317,7 @@ static int ethtool_set_features(struct net_device *dev, void __user *useraddr)
 
 	dev->wanted_features &= ~features[0].valid;
 	dev->wanted_features |= features[0].valid & features[0].requested;
-	netdev_update_features(dev);
+	__netdev_update_features(dev);
 
 	if ((dev->wanted_features ^ dev->features) & features[0].valid)
 		ret |= ETHTOOL_F_WISH;
@@ -499,7 +499,7 @@ static int ethtool_set_one_feature(struct net_device *dev,
 		else
 			dev->wanted_features &= ~mask;
 
-		netdev_update_features(dev);
+		__netdev_update_features(dev);
 		return 0;
 	}
 
@@ -551,7 +551,7 @@ int __ethtool_set_flags(struct net_device *dev, u32 data)
 	dev->wanted_features =
 		(dev->wanted_features & ~changed) | data;
 
-	netdev_update_features(dev);
+	__netdev_update_features(dev);
 
 	return 0;
 }
-- 
cgit v1.2.3-58-ga151


From 7f5c6d4f665bb57a19a34ce1fb16cc708c04f219 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Mon, 4 Apr 2011 17:04:03 +0200
Subject: netfilter: get rid of atomic ops in fast path

We currently use a percpu spinlock to 'protect' rule bytes/packets
counters, after various attempts to use RCU instead.

Lately we added a seqlock so that get_counters() can run without
blocking BH or 'writers'. But we really only need the seqcount in it.

Spinlock itself is only locked by the current/owner cpu, so we can
remove it completely.

This cleanups api, using correct 'writer' vs 'reader' semantic.

At replace time, the get_counters() call makes sure all cpus are done
using the old table.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 include/linux/netfilter/x_tables.h | 96 +++++++++++++++++---------------------
 net/ipv4/netfilter/arp_tables.c    | 18 ++++---
 net/ipv4/netfilter/ip_tables.c     | 28 +++++------
 net/ipv6/netfilter/ip6_tables.c    | 19 +++++---
 net/netfilter/x_tables.c           |  9 ++--
 5 files changed, 80 insertions(+), 90 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 37219525ff6f..32cddf78b13e 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -456,72 +456,60 @@ extern void xt_proto_fini(struct net *net, u_int8_t af);
 extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
 extern void xt_free_table_info(struct xt_table_info *info);
 
-/*
- * Per-CPU spinlock associated with per-cpu table entries, and
- * with a counter for the "reading" side that allows a recursive
- * reader to avoid taking the lock and deadlocking.
- *
- * "reading" is used by ip/arp/ip6 tables rule processing which runs per-cpu.
- * It needs to ensure that the rules are not being changed while the packet
- * is being processed. In some cases, the read lock will be acquired
- * twice on the same CPU; this is okay because of the count.
- *
- * "writing" is used when reading counters.
- *  During replace any readers that are using the old tables have to complete
- *  before freeing the old table. This is handled by the write locking
- *  necessary for reading the counters.
+/**
+ * xt_recseq - recursive seqcount for netfilter use
+ * 
+ * Packet processing changes the seqcount only if no recursion happened
+ * get_counters() can use read_seqcount_begin()/read_seqcount_retry(),
+ * because we use the normal seqcount convention :
+ * Low order bit set to 1 if a writer is active.
  */
-struct xt_info_lock {
-	seqlock_t lock;
-	unsigned char readers;
-};
-DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks);
+DECLARE_PER_CPU(seqcount_t, xt_recseq);
 
-/*
- * Note: we need to ensure that preemption is disabled before acquiring
- * the per-cpu-variable, so we do it as a two step process rather than
- * using "spin_lock_bh()".
- *
- * We _also_ need to disable bottom half processing before updating our
- * nesting count, to make sure that the only kind of re-entrancy is this
- * code being called by itself: since the count+lock is not an atomic
- * operation, we can allow no races.
+/**
+ * xt_write_recseq_begin - start of a write section
  *
- * _Only_ that special combination of being per-cpu and never getting
- * re-entered asynchronously means that the count is safe.
+ * Begin packet processing : all readers must wait the end
+ * 1) Must be called with preemption disabled
+ * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add())
+ * Returns :
+ *  1 if no recursion on this cpu
+ *  0 if recursion detected
  */
-static inline void xt_info_rdlock_bh(void)
+static inline unsigned int xt_write_recseq_begin(void)
 {
-	struct xt_info_lock *lock;
+	unsigned int addend;
 
-	local_bh_disable();
-	lock = &__get_cpu_var(xt_info_locks);
-	if (likely(!lock->readers++))
-		write_seqlock(&lock->lock);
-}
+	/*
+	 * Low order bit of sequence is set if we already
+	 * called xt_write_recseq_begin().
+	 */
+	addend = (__this_cpu_read(xt_recseq.sequence) + 1) & 1;
 
-static inline void xt_info_rdunlock_bh(void)
-{
-	struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
+	/*
+	 * This is kind of a write_seqcount_begin(), but addend is 0 or 1
+	 * We dont check addend value to avoid a test and conditional jump,
+	 * since addend is most likely 1
+	 */
+	__this_cpu_add(xt_recseq.sequence, addend);
+	smp_wmb();
 
-	if (likely(!--lock->readers))
-		write_sequnlock(&lock->lock);
-	local_bh_enable();
+	return addend;
 }
 
-/*
- * The "writer" side needs to get exclusive access to the lock,
- * regardless of readers.  This must be called with bottom half
- * processing (and thus also preemption) disabled.
+/**
+ * xt_write_recseq_end - end of a write section
+ * @addend: return value from previous xt_write_recseq_begin()
+ *
+ * End packet processing : all readers can proceed
+ * 1) Must be called with preemption disabled
+ * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add())
  */
-static inline void xt_info_wrlock(unsigned int cpu)
-{
-	write_seqlock(&per_cpu(xt_info_locks, cpu).lock);
-}
-
-static inline void xt_info_wrunlock(unsigned int cpu)
+static inline void xt_write_recseq_end(unsigned int addend)
 {
-	write_sequnlock(&per_cpu(xt_info_locks, cpu).lock);
+	/* this is kind of a write_seqcount_end(), but addend is 0 or 1 */
+	smp_wmb();
+	__this_cpu_add(xt_recseq.sequence, addend);
 }
 
 /*
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 4b5d457c2d76..2ea743336836 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -260,6 +260,7 @@ unsigned int arpt_do_table(struct sk_buff *skb,
 	void *table_base;
 	const struct xt_table_info *private;
 	struct xt_action_param acpar;
+	unsigned int addend;
 
 	if (!pskb_may_pull(skb, arp_hdr_len(skb->dev)))
 		return NF_DROP;
@@ -267,7 +268,8 @@ unsigned int arpt_do_table(struct sk_buff *skb,
 	indev = in ? in->name : nulldevname;
 	outdev = out ? out->name : nulldevname;
 
-	xt_info_rdlock_bh();
+	local_bh_disable();
+	addend = xt_write_recseq_begin();
 	private = table->private;
 	table_base = private->entries[smp_processor_id()];
 
@@ -338,7 +340,8 @@ unsigned int arpt_do_table(struct sk_buff *skb,
 			/* Verdict */
 			break;
 	} while (!acpar.hotdrop);
-	xt_info_rdunlock_bh();
+	xt_write_recseq_end(addend);
+	local_bh_enable();
 
 	if (acpar.hotdrop)
 		return NF_DROP;
@@ -712,7 +715,7 @@ static void get_counters(const struct xt_table_info *t,
 	unsigned int i;
 
 	for_each_possible_cpu(cpu) {
-		seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+		seqcount_t *s = &per_cpu(xt_recseq, cpu);
 
 		i = 0;
 		xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -720,10 +723,10 @@ static void get_counters(const struct xt_table_info *t,
 			unsigned int start;
 
 			do {
-				start = read_seqbegin(lock);
+				start = read_seqcount_begin(s);
 				bcnt = iter->counters.bcnt;
 				pcnt = iter->counters.pcnt;
-			} while (read_seqretry(lock, start));
+			} while (read_seqcount_retry(s, start));
 
 			ADD_COUNTER(counters[i], bcnt, pcnt);
 			++i;
@@ -1115,6 +1118,7 @@ static int do_add_counters(struct net *net, const void __user *user,
 	int ret = 0;
 	void *loc_cpu_entry;
 	struct arpt_entry *iter;
+	unsigned int addend;
 #ifdef CONFIG_COMPAT
 	struct compat_xt_counters_info compat_tmp;
 
@@ -1171,12 +1175,12 @@ static int do_add_counters(struct net *net, const void __user *user,
 	/* Choose the copy that is on our node */
 	curcpu = smp_processor_id();
 	loc_cpu_entry = private->entries[curcpu];
-	xt_info_wrlock(curcpu);
+	addend = xt_write_recseq_begin();
 	xt_entry_foreach(iter, loc_cpu_entry, private->size) {
 		ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
 		++i;
 	}
-	xt_info_wrunlock(curcpu);
+	xt_write_recseq_end(addend);
  unlock_up_free:
 	local_bh_enable();
 	xt_table_unlock(t);
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index ffcea0d1678e..2b6b700949eb 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -68,15 +68,6 @@ void *ipt_alloc_initial_table(const struct xt_table *info)
 }
 EXPORT_SYMBOL_GPL(ipt_alloc_initial_table);
 
-/*
-   We keep a set of rules for each CPU, so we can avoid write-locking
-   them in the softirq when updating the counters and therefore
-   only need to read-lock in the softirq; doing a write_lock_bh() in user
-   context stops packets coming through and allows user context to read
-   the counters or update the rules.
-
-   Hence the start of any table is given by get_table() below.  */
-
 /* Returns whether matches rule or not. */
 /* Performance critical - called for every packet */
 static inline bool
@@ -311,6 +302,7 @@ ipt_do_table(struct sk_buff *skb,
 	unsigned int *stackptr, origptr, cpu;
 	const struct xt_table_info *private;
 	struct xt_action_param acpar;
+	unsigned int addend;
 
 	/* Initialization */
 	ip = ip_hdr(skb);
@@ -331,7 +323,8 @@ ipt_do_table(struct sk_buff *skb,
 	acpar.hooknum = hook;
 
 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-	xt_info_rdlock_bh();
+	local_bh_disable();
+	addend = xt_write_recseq_begin();
 	private = table->private;
 	cpu        = smp_processor_id();
 	table_base = private->entries[cpu];
@@ -430,7 +423,9 @@ ipt_do_table(struct sk_buff *skb,
 	pr_debug("Exiting %s; resetting sp from %u to %u\n",
 		 __func__, *stackptr, origptr);
 	*stackptr = origptr;
-	xt_info_rdunlock_bh();
+ 	xt_write_recseq_end(addend);
+ 	local_bh_enable();
+
 #ifdef DEBUG_ALLOW_ALL
 	return NF_ACCEPT;
 #else
@@ -886,7 +881,7 @@ get_counters(const struct xt_table_info *t,
 	unsigned int i;
 
 	for_each_possible_cpu(cpu) {
-		seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+		seqcount_t *s = &per_cpu(xt_recseq, cpu);
 
 		i = 0;
 		xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -894,10 +889,10 @@ get_counters(const struct xt_table_info *t,
 			unsigned int start;
 
 			do {
-				start = read_seqbegin(lock);
+				start = read_seqcount_begin(s);
 				bcnt = iter->counters.bcnt;
 				pcnt = iter->counters.pcnt;
-			} while (read_seqretry(lock, start));
+			} while (read_seqcount_retry(s, start));
 
 			ADD_COUNTER(counters[i], bcnt, pcnt);
 			++i; /* macro does multi eval of i */
@@ -1312,6 +1307,7 @@ do_add_counters(struct net *net, const void __user *user,
 	int ret = 0;
 	void *loc_cpu_entry;
 	struct ipt_entry *iter;
+	unsigned int addend;
 #ifdef CONFIG_COMPAT
 	struct compat_xt_counters_info compat_tmp;
 
@@ -1368,12 +1364,12 @@ do_add_counters(struct net *net, const void __user *user,
 	/* Choose the copy that is on our node */
 	curcpu = smp_processor_id();
 	loc_cpu_entry = private->entries[curcpu];
-	xt_info_wrlock(curcpu);
+	addend = xt_write_recseq_begin();
 	xt_entry_foreach(iter, loc_cpu_entry, private->size) {
 		ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
 		++i;
 	}
-	xt_info_wrunlock(curcpu);
+	xt_write_recseq_end(addend);
  unlock_up_free:
 	local_bh_enable();
 	xt_table_unlock(t);
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 0b2af9b85cec..ec7cf579cdd4 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -340,6 +340,7 @@ ip6t_do_table(struct sk_buff *skb,
 	unsigned int *stackptr, origptr, cpu;
 	const struct xt_table_info *private;
 	struct xt_action_param acpar;
+	unsigned int addend;
 
 	/* Initialization */
 	indev = in ? in->name : nulldevname;
@@ -358,7 +359,8 @@ ip6t_do_table(struct sk_buff *skb,
 
 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
 
-	xt_info_rdlock_bh();
+	local_bh_disable();
+	addend = xt_write_recseq_begin();
 	private = table->private;
 	cpu        = smp_processor_id();
 	table_base = private->entries[cpu];
@@ -442,7 +444,9 @@ ip6t_do_table(struct sk_buff *skb,
 	} while (!acpar.hotdrop);
 
 	*stackptr = origptr;
-	xt_info_rdunlock_bh();
+
+ 	xt_write_recseq_end(addend);
+ 	local_bh_enable();
 
 #ifdef DEBUG_ALLOW_ALL
 	return NF_ACCEPT;
@@ -899,7 +903,7 @@ get_counters(const struct xt_table_info *t,
 	unsigned int i;
 
 	for_each_possible_cpu(cpu) {
-		seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+		seqcount_t *s = &per_cpu(xt_recseq, cpu);
 
 		i = 0;
 		xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -907,10 +911,10 @@ get_counters(const struct xt_table_info *t,
 			unsigned int start;
 
 			do {
-				start = read_seqbegin(lock);
+				start = read_seqcount_begin(s);
 				bcnt = iter->counters.bcnt;
 				pcnt = iter->counters.pcnt;
-			} while (read_seqretry(lock, start));
+			} while (read_seqcount_retry(s, start));
 
 			ADD_COUNTER(counters[i], bcnt, pcnt);
 			++i;
@@ -1325,6 +1329,7 @@ do_add_counters(struct net *net, const void __user *user, unsigned int len,
 	int ret = 0;
 	const void *loc_cpu_entry;
 	struct ip6t_entry *iter;
+	unsigned int addend;
 #ifdef CONFIG_COMPAT
 	struct compat_xt_counters_info compat_tmp;
 
@@ -1381,13 +1386,13 @@ do_add_counters(struct net *net, const void __user *user, unsigned int len,
 	i = 0;
 	/* Choose the copy that is on our node */
 	curcpu = smp_processor_id();
-	xt_info_wrlock(curcpu);
+	addend = xt_write_recseq_begin();
 	loc_cpu_entry = private->entries[curcpu];
 	xt_entry_foreach(iter, loc_cpu_entry, private->size) {
 		ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
 		++i;
 	}
-	xt_info_wrunlock(curcpu);
+	xt_write_recseq_end(addend);
 
  unlock_up_free:
 	local_bh_enable();
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index a9adf4c6b299..52959efca858 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -762,8 +762,8 @@ void xt_compat_unlock(u_int8_t af)
 EXPORT_SYMBOL_GPL(xt_compat_unlock);
 #endif
 
-DEFINE_PER_CPU(struct xt_info_lock, xt_info_locks);
-EXPORT_PER_CPU_SYMBOL_GPL(xt_info_locks);
+DEFINE_PER_CPU(seqcount_t, xt_recseq);
+EXPORT_PER_CPU_SYMBOL_GPL(xt_recseq);
 
 static int xt_jumpstack_alloc(struct xt_table_info *i)
 {
@@ -1362,10 +1362,7 @@ static int __init xt_init(void)
 	int rv;
 
 	for_each_possible_cpu(i) {
-		struct xt_info_lock *lock = &per_cpu(xt_info_locks, i);
-
-		seqlock_init(&lock->lock);
-		lock->readers = 0;
+		seqcount_init(&per_cpu(xt_recseq, i));
 	}
 
 	xt = kmalloc(sizeof(struct xt_af) * NFPROTO_NUMPROTO, GFP_KERNEL);
-- 
cgit v1.2.3-58-ga151


From 0545a3037773512d3448557ba048cebb73b3e4af Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Mon, 4 Apr 2011 05:30:58 +0000
Subject: pkt_sched: QFQ - quick fair queue scheduler

This is an implementation of the Quick Fair Queue scheduler developed
by Fabio Checconi. The same algorithm is already implemented in ipfw
in FreeBSD. Fabio had an earlier version developed on Linux, I just
cleaned it up.  Thanks to Eric Dumazet for testing this under load.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/pkt_sched.h |   15 +
 net/sched/Kconfig         |   11 +
 net/sched/Makefile        |    1 +
 net/sched/sch_qfq.c       | 1137 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 1164 insertions(+)
 create mode 100644 net/sched/sch_qfq.c

(limited to 'include/linux')

diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index b1032a3fafdc..8062e0a68dda 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -588,4 +588,19 @@ struct tc_sfb_xstats {
 
 #define SFB_MAX_PROB 0xFFFF
 
+/* QFQ */
+enum {
+	TCA_QFQ_UNSPEC,
+	TCA_QFQ_WEIGHT,
+	TCA_QFQ_LMAX,
+	__TCA_QFQ_MAX
+};
+
+#define TCA_QFQ_MAX	(__TCA_QFQ_MAX - 1)
+
+struct tc_qfq_stats {
+	__u32 weight;
+	__u32 lmax;
+};
+
 #endif
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index a7a5583d4f68..aeaa2110b699 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -239,6 +239,17 @@ config NET_SCH_CHOKE
 	  To compile this code as a module, choose M here: the
 	  module will be called sch_choke.
 
+config NET_SCH_QFQ
+	tristate "Quick Fair Queueing scheduler (QFQ)"
+	help
+	  Say Y here if you want to use the Quick Fair Queueing Scheduler (QFQ)
+	  packet scheduling algorithm.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sch_qfq.
+
+	  If unsure, say N.
+
 config NET_SCH_INGRESS
 	tristate "Ingress Qdisc"
 	depends on NET_CLS_ACT
diff --git a/net/sched/Makefile b/net/sched/Makefile
index 2e77b8dba22e..dc5889c0a15a 100644
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_NET_SCH_NETEM)	+= sch_netem.o
 obj-$(CONFIG_NET_SCH_DRR)	+= sch_drr.o
 obj-$(CONFIG_NET_SCH_MQPRIO)	+= sch_mqprio.o
 obj-$(CONFIG_NET_SCH_CHOKE)	+= sch_choke.o
+obj-$(CONFIG_NET_SCH_QFQ)	+= sch_qfq.o
 
 obj-$(CONFIG_NET_CLS_U32)	+= cls_u32.o
 obj-$(CONFIG_NET_CLS_ROUTE4)	+= cls_route.o
diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
new file mode 100644
index 000000000000..103343408593
--- /dev/null
+++ b/net/sched/sch_qfq.c
@@ -0,0 +1,1137 @@
+/*
+ * net/sched/sch_qfq.c         Quick Fair Queueing Scheduler.
+ *
+ * Copyright (c) 2009 Fabio Checconi, Luigi Rizzo, and Paolo Valente.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/pkt_sched.h>
+#include <net/sch_generic.h>
+#include <net/pkt_sched.h>
+#include <net/pkt_cls.h>
+
+
+/*  Quick Fair Queueing
+    ===================
+
+    Sources:
+
+    Fabio Checconi, Luigi Rizzo, and Paolo Valente: "QFQ: Efficient
+    Packet Scheduling with Tight Bandwidth Distribution Guarantees."
+
+    See also:
+    http://retis.sssup.it/~fabio/linux/qfq/
+ */
+
+/*
+
+  Virtual time computations.
+
+  S, F and V are all computed in fixed point arithmetic with
+  FRAC_BITS decimal bits.
+
+  QFQ_MAX_INDEX is the maximum index allowed for a group. We need
+	one bit per index.
+  QFQ_MAX_WSHIFT is the maximum power of two supported as a weight.
+
+  The layout of the bits is as below:
+
+                   [ MTU_SHIFT ][      FRAC_BITS    ]
+                   [ MAX_INDEX    ][ MIN_SLOT_SHIFT ]
+				 ^.__grp->index = 0
+				 *.__grp->slot_shift
+
+  where MIN_SLOT_SHIFT is derived by difference from the others.
+
+  The max group index corresponds to Lmax/w_min, where
+  Lmax=1<<MTU_SHIFT, w_min = 1 .
+  From this, and knowing how many groups (MAX_INDEX) we want,
+  we can derive the shift corresponding to each group.
+
+  Because we often need to compute
+	F = S + len/w_i  and V = V + len/wsum
+  instead of storing w_i store the value
+	inv_w = (1<<FRAC_BITS)/w_i
+  so we can do F = S + len * inv_w * wsum.
+  We use W_TOT in the formulas so we can easily move between
+  static and adaptive weight sum.
+
+  The per-scheduler-instance data contain all the data structures
+  for the scheduler: bitmaps and bucket lists.
+
+ */
+
+/*
+ * Maximum number of consecutive slots occupied by backlogged classes
+ * inside a group.
+ */
+#define QFQ_MAX_SLOTS	32
+
+/*
+ * Shifts used for class<->group mapping.  We allow class weights that are
+ * in the range [1, 2^MAX_WSHIFT], and we try to map each class i to the
+ * group with the smallest index that can support the L_i / r_i configured
+ * for the class.
+ *
+ * grp->index is the index of the group; and grp->slot_shift
+ * is the shift for the corresponding (scaled) sigma_i.
+ */
+#define QFQ_MAX_INDEX		19
+#define QFQ_MAX_WSHIFT		16
+
+#define	QFQ_MAX_WEIGHT		(1<<QFQ_MAX_WSHIFT)
+#define QFQ_MAX_WSUM		(2*QFQ_MAX_WEIGHT)
+
+#define FRAC_BITS		30	/* fixed point arithmetic */
+#define ONE_FP			(1UL << FRAC_BITS)
+#define IWSUM			(ONE_FP/QFQ_MAX_WSUM)
+
+#define QFQ_MTU_SHIFT		11
+#define QFQ_MIN_SLOT_SHIFT	(FRAC_BITS + QFQ_MTU_SHIFT - QFQ_MAX_INDEX)
+
+/*
+ * Possible group states.  These values are used as indexes for the bitmaps
+ * array of struct qfq_queue.
+ */
+enum qfq_state { ER, IR, EB, IB, QFQ_MAX_STATE };
+
+struct qfq_group;
+
+struct qfq_class {
+	struct Qdisc_class_common common;
+
+	unsigned int refcnt;
+	unsigned int filter_cnt;
+
+	struct gnet_stats_basic_packed bstats;
+	struct gnet_stats_queue qstats;
+	struct gnet_stats_rate_est rate_est;
+	struct Qdisc *qdisc;
+
+	struct hlist_node next;	/* Link for the slot list. */
+	u64 S, F;		/* flow timestamps (exact) */
+
+	/* group we belong to. In principle we would need the index,
+	 * which is log_2(lmax/weight), but we never reference it
+	 * directly, only the group.
+	 */
+	struct qfq_group *grp;
+
+	/* these are copied from the flowset. */
+	u32	inv_w;		/* ONE_FP/weight */
+	u32	lmax;		/* Max packet size for this flow. */
+};
+
+struct qfq_group {
+	u64 S, F;			/* group timestamps (approx). */
+	unsigned int slot_shift;	/* Slot shift. */
+	unsigned int index;		/* Group index. */
+	unsigned int front;		/* Index of the front slot. */
+	unsigned long full_slots;	/* non-empty slots */
+
+	/* Array of RR lists of active classes. */
+	struct hlist_head slots[QFQ_MAX_SLOTS];
+};
+
+struct qfq_sched {
+	struct tcf_proto *filter_list;
+	struct Qdisc_class_hash clhash;
+
+	u64		V;		/* Precise virtual time. */
+	u32		wsum;		/* weight sum */
+
+	unsigned long bitmaps[QFQ_MAX_STATE];	    /* Group bitmaps. */
+	struct qfq_group groups[QFQ_MAX_INDEX + 1]; /* The groups. */
+};
+
+static struct qfq_class *qfq_find_class(struct Qdisc *sch, u32 classid)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct Qdisc_class_common *clc;
+
+	clc = qdisc_class_find(&q->clhash, classid);
+	if (clc == NULL)
+		return NULL;
+	return container_of(clc, struct qfq_class, common);
+}
+
+static void qfq_purge_queue(struct qfq_class *cl)
+{
+	unsigned int len = cl->qdisc->q.qlen;
+
+	qdisc_reset(cl->qdisc);
+	qdisc_tree_decrease_qlen(cl->qdisc, len);
+}
+
+static const struct nla_policy qfq_policy[TCA_QFQ_MAX + 1] = {
+	[TCA_QFQ_WEIGHT] = { .type = NLA_U32 },
+	[TCA_QFQ_LMAX] = { .type = NLA_U32 },
+};
+
+/*
+ * Calculate a flow index, given its weight and maximum packet length.
+ * index = log_2(maxlen/weight) but we need to apply the scaling.
+ * This is used only once at flow creation.
+ */
+static int qfq_calc_index(u32 inv_w, unsigned int maxlen)
+{
+	u64 slot_size = (u64)maxlen * inv_w;
+	unsigned long size_map;
+	int index = 0;
+
+	size_map = slot_size >> QFQ_MIN_SLOT_SHIFT;
+	if (!size_map)
+		goto out;
+
+	index = __fls(size_map) + 1;	/* basically a log_2 */
+	index -= !(slot_size - (1ULL << (index + QFQ_MIN_SLOT_SHIFT - 1)));
+
+	if (index < 0)
+		index = 0;
+out:
+	pr_debug("qfq calc_index: W = %lu, L = %u, I = %d\n",
+		 (unsigned long) ONE_FP/inv_w, maxlen, index);
+
+	return index;
+}
+
+static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
+			    struct nlattr **tca, unsigned long *arg)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl = (struct qfq_class *)*arg;
+	struct nlattr *tb[TCA_QFQ_MAX + 1];
+	u32 weight, lmax, inv_w;
+	int i, err;
+
+	if (tca[TCA_OPTIONS] == NULL) {
+		pr_notice("qfq: no options\n");
+		return -EINVAL;
+	}
+
+	err = nla_parse_nested(tb, TCA_QFQ_MAX, tca[TCA_OPTIONS], qfq_policy);
+	if (err < 0)
+		return err;
+
+	if (tb[TCA_QFQ_WEIGHT]) {
+		weight = nla_get_u32(tb[TCA_QFQ_WEIGHT]);
+		if (!weight || weight > (1UL << QFQ_MAX_WSHIFT)) {
+			pr_notice("qfq: invalid weight %u\n", weight);
+			return -EINVAL;
+		}
+	} else
+		weight = 1;
+
+	inv_w = ONE_FP / weight;
+	weight = ONE_FP / inv_w;
+	if (q->wsum + weight > QFQ_MAX_WSUM) {
+		pr_notice("qfq: total weight out of range (%u + %u)\n",
+			  weight, q->wsum);
+		return -EINVAL;
+	}
+
+	if (tb[TCA_QFQ_LMAX]) {
+		lmax = nla_get_u32(tb[TCA_QFQ_LMAX]);
+		if (!lmax || lmax > (1UL << QFQ_MTU_SHIFT)) {
+			pr_notice("qfq: invalid max length %u\n", lmax);
+			return -EINVAL;
+		}
+	} else
+		lmax = 1UL << QFQ_MTU_SHIFT;
+
+	if (cl != NULL) {
+		if (tca[TCA_RATE]) {
+			err = gen_replace_estimator(&cl->bstats, &cl->rate_est,
+						    qdisc_root_sleeping_lock(sch),
+						    tca[TCA_RATE]);
+			if (err)
+				return err;
+		}
+
+		sch_tree_lock(sch);
+		if (tb[TCA_QFQ_WEIGHT]) {
+			q->wsum = weight - ONE_FP / cl->inv_w;
+			cl->inv_w = inv_w;
+		}
+		sch_tree_unlock(sch);
+
+		return 0;
+	}
+
+	cl = kzalloc(sizeof(struct qfq_class), GFP_KERNEL);
+	if (cl == NULL)
+		return -ENOBUFS;
+
+	cl->refcnt = 1;
+	cl->common.classid = classid;
+	cl->lmax = lmax;
+	cl->inv_w = inv_w;
+	i = qfq_calc_index(cl->inv_w, cl->lmax);
+
+	cl->grp = &q->groups[i];
+	q->wsum += weight;
+
+	cl->qdisc = qdisc_create_dflt(sch->dev_queue,
+				      &pfifo_qdisc_ops, classid);
+	if (cl->qdisc == NULL)
+		cl->qdisc = &noop_qdisc;
+
+	if (tca[TCA_RATE]) {
+		err = gen_new_estimator(&cl->bstats, &cl->rate_est,
+					qdisc_root_sleeping_lock(sch),
+					tca[TCA_RATE]);
+		if (err) {
+			qdisc_destroy(cl->qdisc);
+			kfree(cl);
+			return err;
+		}
+	}
+
+	sch_tree_lock(sch);
+	qdisc_class_hash_insert(&q->clhash, &cl->common);
+	sch_tree_unlock(sch);
+
+	qdisc_class_hash_grow(sch, &q->clhash);
+
+	*arg = (unsigned long)cl;
+	return 0;
+}
+
+static void qfq_destroy_class(struct Qdisc *sch, struct qfq_class *cl)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+
+	if (cl->inv_w) {
+		q->wsum -= ONE_FP / cl->inv_w;
+		cl->inv_w = 0;
+	}
+
+	gen_kill_estimator(&cl->bstats, &cl->rate_est);
+	qdisc_destroy(cl->qdisc);
+	kfree(cl);
+}
+
+static int qfq_delete_class(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	if (cl->filter_cnt > 0)
+		return -EBUSY;
+
+	sch_tree_lock(sch);
+
+	qfq_purge_queue(cl);
+	qdisc_class_hash_remove(&q->clhash, &cl->common);
+
+	BUG_ON(--cl->refcnt == 0);
+	/*
+	 * This shouldn't happen: we "hold" one cops->get() when called
+	 * from tc_ctl_tclass; the destroy method is done from cops->put().
+	 */
+
+	sch_tree_unlock(sch);
+	return 0;
+}
+
+static unsigned long qfq_get_class(struct Qdisc *sch, u32 classid)
+{
+	struct qfq_class *cl = qfq_find_class(sch, classid);
+
+	if (cl != NULL)
+		cl->refcnt++;
+
+	return (unsigned long)cl;
+}
+
+static void qfq_put_class(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	if (--cl->refcnt == 0)
+		qfq_destroy_class(sch, cl);
+}
+
+static struct tcf_proto **qfq_tcf_chain(struct Qdisc *sch, unsigned long cl)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+
+	if (cl)
+		return NULL;
+
+	return &q->filter_list;
+}
+
+static unsigned long qfq_bind_tcf(struct Qdisc *sch, unsigned long parent,
+				  u32 classid)
+{
+	struct qfq_class *cl = qfq_find_class(sch, classid);
+
+	if (cl != NULL)
+		cl->filter_cnt++;
+
+	return (unsigned long)cl;
+}
+
+static void qfq_unbind_tcf(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	cl->filter_cnt--;
+}
+
+static int qfq_graft_class(struct Qdisc *sch, unsigned long arg,
+			   struct Qdisc *new, struct Qdisc **old)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	if (new == NULL) {
+		new = qdisc_create_dflt(sch->dev_queue,
+					&pfifo_qdisc_ops, cl->common.classid);
+		if (new == NULL)
+			new = &noop_qdisc;
+	}
+
+	sch_tree_lock(sch);
+	qfq_purge_queue(cl);
+	*old = cl->qdisc;
+	cl->qdisc = new;
+	sch_tree_unlock(sch);
+	return 0;
+}
+
+static struct Qdisc *qfq_class_leaf(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	return cl->qdisc;
+}
+
+static int qfq_dump_class(struct Qdisc *sch, unsigned long arg,
+			  struct sk_buff *skb, struct tcmsg *tcm)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+	struct nlattr *nest;
+
+	tcm->tcm_parent	= TC_H_ROOT;
+	tcm->tcm_handle	= cl->common.classid;
+	tcm->tcm_info	= cl->qdisc->handle;
+
+	nest = nla_nest_start(skb, TCA_OPTIONS);
+	if (nest == NULL)
+		goto nla_put_failure;
+	NLA_PUT_U32(skb, TCA_QFQ_WEIGHT, ONE_FP/cl->inv_w);
+	NLA_PUT_U32(skb, TCA_QFQ_LMAX, cl->lmax);
+	return nla_nest_end(skb, nest);
+
+nla_put_failure:
+	nla_nest_cancel(skb, nest);
+	return -EMSGSIZE;
+}
+
+static int qfq_dump_class_stats(struct Qdisc *sch, unsigned long arg,
+				struct gnet_dump *d)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+	struct tc_qfq_stats xstats;
+
+	memset(&xstats, 0, sizeof(xstats));
+	cl->qdisc->qstats.qlen = cl->qdisc->q.qlen;
+
+	xstats.weight = ONE_FP/cl->inv_w;
+	xstats.lmax = cl->lmax;
+
+	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
+	    gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_queue(d, &cl->qdisc->qstats) < 0)
+		return -1;
+
+	return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
+}
+
+static void qfq_walk(struct Qdisc *sch, struct qdisc_walker *arg)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl;
+	struct hlist_node *n;
+	unsigned int i;
+
+	if (arg->stop)
+		return;
+
+	for (i = 0; i < q->clhash.hashsize; i++) {
+		hlist_for_each_entry(cl, n, &q->clhash.hash[i], common.hnode) {
+			if (arg->count < arg->skip) {
+				arg->count++;
+				continue;
+			}
+			if (arg->fn(sch, (unsigned long)cl, arg) < 0) {
+				arg->stop = 1;
+				return;
+			}
+			arg->count++;
+		}
+	}
+}
+
+static struct qfq_class *qfq_classify(struct sk_buff *skb, struct Qdisc *sch,
+				      int *qerr)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl;
+	struct tcf_result res;
+	int result;
+
+	if (TC_H_MAJ(skb->priority ^ sch->handle) == 0) {
+		pr_debug("qfq_classify: found %d\n", skb->priority);
+		cl = qfq_find_class(sch, skb->priority);
+		if (cl != NULL)
+			return cl;
+	}
+
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
+	result = tc_classify(skb, q->filter_list, &res);
+	if (result >= 0) {
+#ifdef CONFIG_NET_CLS_ACT
+		switch (result) {
+		case TC_ACT_QUEUED:
+		case TC_ACT_STOLEN:
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
+		case TC_ACT_SHOT:
+			return NULL;
+		}
+#endif
+		cl = (struct qfq_class *)res.class;
+		if (cl == NULL)
+			cl = qfq_find_class(sch, res.classid);
+		return cl;
+	}
+
+	return NULL;
+}
+
+/* Generic comparison function, handling wraparound. */
+static inline int qfq_gt(u64 a, u64 b)
+{
+	return (s64)(a - b) > 0;
+}
+
+/* Round a precise timestamp to its slotted value. */
+static inline u64 qfq_round_down(u64 ts, unsigned int shift)
+{
+	return ts & ~((1ULL << shift) - 1);
+}
+
+/* return the pointer to the group with lowest index in the bitmap */
+static inline struct qfq_group *qfq_ffs(struct qfq_sched *q,
+					unsigned long bitmap)
+{
+	int index = __ffs(bitmap);
+	return &q->groups[index];
+}
+/* Calculate a mask to mimic what would be ffs_from(). */
+static inline unsigned long mask_from(unsigned long bitmap, int from)
+{
+	return bitmap & ~((1UL << from) - 1);
+}
+
+/*
+ * The state computation relies on ER=0, IR=1, EB=2, IB=3
+ * First compute eligibility comparing grp->S, q->V,
+ * then check if someone is blocking us and possibly add EB
+ */
+static int qfq_calc_state(struct qfq_sched *q, const struct qfq_group *grp)
+{
+	/* if S > V we are not eligible */
+	unsigned int state = qfq_gt(grp->S, q->V);
+	unsigned long mask = mask_from(q->bitmaps[ER], grp->index);
+	struct qfq_group *next;
+
+	if (mask) {
+		next = qfq_ffs(q, mask);
+		if (qfq_gt(grp->F, next->F))
+			state |= EB;
+	}
+
+	return state;
+}
+
+
+/*
+ * In principle
+ *	q->bitmaps[dst] |= q->bitmaps[src] & mask;
+ *	q->bitmaps[src] &= ~mask;
+ * but we should make sure that src != dst
+ */
+static inline void qfq_move_groups(struct qfq_sched *q, unsigned long mask,
+				   int src, int dst)
+{
+	q->bitmaps[dst] |= q->bitmaps[src] & mask;
+	q->bitmaps[src] &= ~mask;
+}
+
+static void qfq_unblock_groups(struct qfq_sched *q, int index, u64 old_F)
+{
+	unsigned long mask = mask_from(q->bitmaps[ER], index + 1);
+	struct qfq_group *next;
+
+	if (mask) {
+		next = qfq_ffs(q, mask);
+		if (!qfq_gt(next->F, old_F))
+			return;
+	}
+
+	mask = (1UL << index) - 1;
+	qfq_move_groups(q, mask, EB, ER);
+	qfq_move_groups(q, mask, IB, IR);
+}
+
+/*
+ * perhaps
+ *
+	old_V ^= q->V;
+	old_V >>= QFQ_MIN_SLOT_SHIFT;
+	if (old_V) {
+		...
+	}
+ *
+ */
+static void qfq_make_eligible(struct qfq_sched *q, u64 old_V)
+{
+	unsigned long vslot = q->V >> QFQ_MIN_SLOT_SHIFT;
+	unsigned long old_vslot = old_V >> QFQ_MIN_SLOT_SHIFT;
+
+	if (vslot != old_vslot) {
+		unsigned long mask = (1UL << fls(vslot ^ old_vslot)) - 1;
+		qfq_move_groups(q, mask, IR, ER);
+		qfq_move_groups(q, mask, IB, EB);
+	}
+}
+
+
+/*
+ * XXX we should make sure that slot becomes less than 32.
+ * This is guaranteed by the input values.
+ * roundedS is always cl->S rounded on grp->slot_shift bits.
+ */
+static void qfq_slot_insert(struct qfq_group *grp, struct qfq_class *cl,
+			    u64 roundedS)
+{
+	u64 slot = (roundedS - grp->S) >> grp->slot_shift;
+	unsigned int i = (grp->front + slot) % QFQ_MAX_SLOTS;
+
+	hlist_add_head(&cl->next, &grp->slots[i]);
+	__set_bit(slot, &grp->full_slots);
+}
+
+/* Maybe introduce hlist_first_entry?? */
+static struct qfq_class *qfq_slot_head(struct qfq_group *grp)
+{
+	return hlist_entry(grp->slots[grp->front].first,
+			   struct qfq_class, next);
+}
+
+/*
+ * remove the entry from the slot
+ */
+static void qfq_front_slot_remove(struct qfq_group *grp)
+{
+	struct qfq_class *cl = qfq_slot_head(grp);
+
+	BUG_ON(!cl);
+	hlist_del(&cl->next);
+	if (hlist_empty(&grp->slots[grp->front]))
+		__clear_bit(0, &grp->full_slots);
+}
+
+/*
+ * Returns the first full queue in a group. As a side effect,
+ * adjust the bucket list so the first non-empty bucket is at
+ * position 0 in full_slots.
+ */
+static struct qfq_class *qfq_slot_scan(struct qfq_group *grp)
+{
+	unsigned int i;
+
+	pr_debug("qfq slot_scan: grp %u full %#lx\n",
+		 grp->index, grp->full_slots);
+
+	if (grp->full_slots == 0)
+		return NULL;
+
+	i = __ffs(grp->full_slots);  /* zero based */
+	if (i > 0) {
+		grp->front = (grp->front + i) % QFQ_MAX_SLOTS;
+		grp->full_slots >>= i;
+	}
+
+	return qfq_slot_head(grp);
+}
+
+/*
+ * adjust the bucket list. When the start time of a group decreases,
+ * we move the index down (modulo QFQ_MAX_SLOTS) so we don't need to
+ * move the objects. The mask of occupied slots must be shifted
+ * because we use ffs() to find the first non-empty slot.
+ * This covers decreases in the group's start time, but what about
+ * increases of the start time ?
+ * Here too we should make sure that i is less than 32
+ */
+static void qfq_slot_rotate(struct qfq_group *grp, u64 roundedS)
+{
+	unsigned int i = (grp->S - roundedS) >> grp->slot_shift;
+
+	grp->full_slots <<= i;
+	grp->front = (grp->front - i) % QFQ_MAX_SLOTS;
+}
+
+static void qfq_update_eligible(struct qfq_sched *q, u64 old_V)
+{
+	struct qfq_group *grp;
+	unsigned long ineligible;
+
+	ineligible = q->bitmaps[IR] | q->bitmaps[IB];
+	if (ineligible) {
+		if (!q->bitmaps[ER]) {
+			grp = qfq_ffs(q, ineligible);
+			if (qfq_gt(grp->S, q->V))
+				q->V = grp->S;
+		}
+		qfq_make_eligible(q, old_V);
+	}
+}
+
+/* What is length of next packet in queue (0 if queue is empty) */
+static unsigned int qdisc_peek_len(struct Qdisc *sch)
+{
+	struct sk_buff *skb;
+
+	skb = sch->ops->peek(sch);
+	return skb ? qdisc_pkt_len(skb) : 0;
+}
+
+/*
+ * Updates the class, returns true if also the group needs to be updated.
+ */
+static bool qfq_update_class(struct qfq_group *grp, struct qfq_class *cl)
+{
+	unsigned int len = qdisc_peek_len(cl->qdisc);
+
+	cl->S = cl->F;
+	if (!len)
+		qfq_front_slot_remove(grp);	/* queue is empty */
+	else {
+		u64 roundedS;
+
+		cl->F = cl->S + (u64)len * cl->inv_w;
+		roundedS = qfq_round_down(cl->S, grp->slot_shift);
+		if (roundedS == grp->S)
+			return false;
+
+		qfq_front_slot_remove(grp);
+		qfq_slot_insert(grp, cl, roundedS);
+	}
+
+	return true;
+}
+
+static struct sk_buff *qfq_dequeue(struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	struct qfq_class *cl;
+	struct sk_buff *skb;
+	unsigned int len;
+	u64 old_V;
+
+	if (!q->bitmaps[ER])
+		return NULL;
+
+	grp = qfq_ffs(q, q->bitmaps[ER]);
+
+	cl = qfq_slot_head(grp);
+	skb = qdisc_dequeue_peeked(cl->qdisc);
+	if (!skb) {
+		WARN_ONCE(1, "qfq_dequeue: non-workconserving leaf\n");
+		return NULL;
+	}
+
+	sch->q.qlen--;
+	qdisc_bstats_update(sch, skb);
+
+	old_V = q->V;
+	len = qdisc_pkt_len(skb);
+	q->V += (u64)len * IWSUM;
+	pr_debug("qfq dequeue: len %u F %lld now %lld\n",
+		 len, (unsigned long long) cl->F, (unsigned long long) q->V);
+
+	if (qfq_update_class(grp, cl)) {
+		u64 old_F = grp->F;
+
+		cl = qfq_slot_scan(grp);
+		if (!cl)
+			__clear_bit(grp->index, &q->bitmaps[ER]);
+		else {
+			u64 roundedS = qfq_round_down(cl->S, grp->slot_shift);
+			unsigned int s;
+
+			if (grp->S == roundedS)
+				goto skip_unblock;
+			grp->S = roundedS;
+			grp->F = roundedS + (2ULL << grp->slot_shift);
+			__clear_bit(grp->index, &q->bitmaps[ER]);
+			s = qfq_calc_state(q, grp);
+			__set_bit(grp->index, &q->bitmaps[s]);
+		}
+
+		qfq_unblock_groups(q, grp->index, old_F);
+	}
+
+skip_unblock:
+	qfq_update_eligible(q, old_V);
+
+	return skb;
+}
+
+/*
+ * Assign a reasonable start time for a new flow k in group i.
+ * Admissible values for \hat(F) are multiples of \sigma_i
+ * no greater than V+\sigma_i . Larger values mean that
+ * we had a wraparound so we consider the timestamp to be stale.
+ *
+ * If F is not stale and F >= V then we set S = F.
+ * Otherwise we should assign S = V, but this may violate
+ * the ordering in ER. So, if we have groups in ER, set S to
+ * the F_j of the first group j which would be blocking us.
+ * We are guaranteed not to move S backward because
+ * otherwise our group i would still be blocked.
+ */
+static void qfq_update_start(struct qfq_sched *q, struct qfq_class *cl)
+{
+	unsigned long mask;
+	uint32_t limit, roundedF;
+	int slot_shift = cl->grp->slot_shift;
+
+	roundedF = qfq_round_down(cl->F, slot_shift);
+	limit = qfq_round_down(q->V, slot_shift) + (1UL << slot_shift);
+
+	if (!qfq_gt(cl->F, q->V) || qfq_gt(roundedF, limit)) {
+		/* timestamp was stale */
+		mask = mask_from(q->bitmaps[ER], cl->grp->index);
+		if (mask) {
+			struct qfq_group *next = qfq_ffs(q, mask);
+			if (qfq_gt(roundedF, next->F)) {
+				cl->S = next->F;
+				return;
+			}
+		}
+		cl->S = q->V;
+	} else  /* timestamp is not stale */
+		cl->S = cl->F;
+}
+
+static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	struct qfq_class *cl;
+	int err;
+	u64 roundedS;
+	int s;
+
+	cl = qfq_classify(skb, sch, &err);
+	if (cl == NULL) {
+		if (err & __NET_XMIT_BYPASS)
+			sch->qstats.drops++;
+		kfree_skb(skb);
+		return err;
+	}
+	pr_debug("qfq_enqueue: cl = %x\n", cl->common.classid);
+
+	err = qdisc_enqueue(skb, cl->qdisc);
+	if (unlikely(err != NET_XMIT_SUCCESS)) {
+		pr_debug("qfq_enqueue: enqueue failed %d\n", err);
+		if (net_xmit_drop_count(err)) {
+			cl->qstats.drops++;
+			sch->qstats.drops++;
+		}
+		return err;
+	}
+
+	bstats_update(&cl->bstats, skb);
+	++sch->q.qlen;
+
+	/* If the new skb is not the head of queue, then done here. */
+	if (cl->qdisc->q.qlen != 1)
+		return err;
+
+	/* If reach this point, queue q was idle */
+	grp = cl->grp;
+	qfq_update_start(q, cl);
+
+	/* compute new finish time and rounded start. */
+	cl->F = cl->S + (u64)qdisc_pkt_len(skb) * cl->inv_w;
+	roundedS = qfq_round_down(cl->S, grp->slot_shift);
+
+	/*
+	 * insert cl in the correct bucket.
+	 * If cl->S >= grp->S we don't need to adjust the
+	 * bucket list and simply go to the insertion phase.
+	 * Otherwise grp->S is decreasing, we must make room
+	 * in the bucket list, and also recompute the group state.
+	 * Finally, if there were no flows in this group and nobody
+	 * was in ER make sure to adjust V.
+	 */
+	if (grp->full_slots) {
+		if (!qfq_gt(grp->S, cl->S))
+			goto skip_update;
+
+		/* create a slot for this cl->S */
+		qfq_slot_rotate(grp, roundedS);
+		/* group was surely ineligible, remove */
+		__clear_bit(grp->index, &q->bitmaps[IR]);
+		__clear_bit(grp->index, &q->bitmaps[IB]);
+	} else if (!q->bitmaps[ER] && qfq_gt(roundedS, q->V))
+		q->V = roundedS;
+
+	grp->S = roundedS;
+	grp->F = roundedS + (2ULL << grp->slot_shift);
+	s = qfq_calc_state(q, grp);
+	__set_bit(grp->index, &q->bitmaps[s]);
+
+	pr_debug("qfq enqueue: new state %d %#lx S %lld F %lld V %lld\n",
+		 s, q->bitmaps[s],
+		 (unsigned long long) cl->S,
+		 (unsigned long long) cl->F,
+		 (unsigned long long) q->V);
+
+skip_update:
+	qfq_slot_insert(grp, cl, roundedS);
+
+	return err;
+}
+
+
+static void qfq_slot_remove(struct qfq_sched *q, struct qfq_group *grp,
+			    struct qfq_class *cl)
+{
+	unsigned int i, offset;
+	u64 roundedS;
+
+	roundedS = qfq_round_down(cl->S, grp->slot_shift);
+	offset = (roundedS - grp->S) >> grp->slot_shift;
+	i = (grp->front + offset) % QFQ_MAX_SLOTS;
+
+	hlist_del(&cl->next);
+	if (hlist_empty(&grp->slots[i]))
+		__clear_bit(offset, &grp->full_slots);
+}
+
+/*
+ * called to forcibly destroy a queue.
+ * If the queue is not in the front bucket, or if it has
+ * other queues in the front bucket, we can simply remove
+ * the queue with no other side effects.
+ * Otherwise we must propagate the event up.
+ */
+static void qfq_deactivate_class(struct qfq_sched *q, struct qfq_class *cl)
+{
+	struct qfq_group *grp = cl->grp;
+	unsigned long mask;
+	u64 roundedS;
+	int s;
+
+	cl->F = cl->S;
+	qfq_slot_remove(q, grp, cl);
+
+	if (!grp->full_slots) {
+		__clear_bit(grp->index, &q->bitmaps[IR]);
+		__clear_bit(grp->index, &q->bitmaps[EB]);
+		__clear_bit(grp->index, &q->bitmaps[IB]);
+
+		if (test_bit(grp->index, &q->bitmaps[ER]) &&
+		    !(q->bitmaps[ER] & ~((1UL << grp->index) - 1))) {
+			mask = q->bitmaps[ER] & ((1UL << grp->index) - 1);
+			if (mask)
+				mask = ~((1UL << __fls(mask)) - 1);
+			else
+				mask = ~0UL;
+			qfq_move_groups(q, mask, EB, ER);
+			qfq_move_groups(q, mask, IB, IR);
+		}
+		__clear_bit(grp->index, &q->bitmaps[ER]);
+	} else if (hlist_empty(&grp->slots[grp->front])) {
+		cl = qfq_slot_scan(grp);
+		roundedS = qfq_round_down(cl->S, grp->slot_shift);
+		if (grp->S != roundedS) {
+			__clear_bit(grp->index, &q->bitmaps[ER]);
+			__clear_bit(grp->index, &q->bitmaps[IR]);
+			__clear_bit(grp->index, &q->bitmaps[EB]);
+			__clear_bit(grp->index, &q->bitmaps[IB]);
+			grp->S = roundedS;
+			grp->F = roundedS + (2ULL << grp->slot_shift);
+			s = qfq_calc_state(q, grp);
+			__set_bit(grp->index, &q->bitmaps[s]);
+		}
+	}
+
+	qfq_update_eligible(q, q->V);
+}
+
+static void qfq_qlen_notify(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	if (cl->qdisc->q.qlen == 0)
+		qfq_deactivate_class(q, cl);
+}
+
+static unsigned int qfq_drop(struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	unsigned int i, j, len;
+
+	for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+		grp = &q->groups[i];
+		for (j = 0; j < QFQ_MAX_SLOTS; j++) {
+			struct qfq_class *cl;
+			struct hlist_node *n;
+
+			hlist_for_each_entry(cl, n, &grp->slots[j], next) {
+
+				if (!cl->qdisc->ops->drop)
+					continue;
+
+				len = cl->qdisc->ops->drop(cl->qdisc);
+				if (len > 0) {
+					sch->q.qlen--;
+					if (!cl->qdisc->q.qlen)
+						qfq_deactivate_class(q, cl);
+
+					return len;
+				}
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int qfq_init_qdisc(struct Qdisc *sch, struct nlattr *opt)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	int i, j, err;
+
+	err = qdisc_class_hash_init(&q->clhash);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+		grp = &q->groups[i];
+		grp->index = i;
+		grp->slot_shift = QFQ_MTU_SHIFT + FRAC_BITS
+				   - (QFQ_MAX_INDEX - i);
+		for (j = 0; j < QFQ_MAX_SLOTS; j++)
+			INIT_HLIST_HEAD(&grp->slots[j]);
+	}
+
+	return 0;
+}
+
+static void qfq_reset_qdisc(struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	struct qfq_class *cl;
+	struct hlist_node *n, *tmp;
+	unsigned int i, j;
+
+	for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+		grp = &q->groups[i];
+		for (j = 0; j < QFQ_MAX_SLOTS; j++) {
+			hlist_for_each_entry_safe(cl, n, tmp,
+						  &grp->slots[j], next) {
+				qfq_deactivate_class(q, cl);
+			}
+		}
+	}
+
+	for (i = 0; i < q->clhash.hashsize; i++) {
+		hlist_for_each_entry(cl, n, &q->clhash.hash[i], common.hnode)
+			qdisc_reset(cl->qdisc);
+	}
+	sch->q.qlen = 0;
+}
+
+static void qfq_destroy_qdisc(struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl;
+	struct hlist_node *n, *next;
+	unsigned int i;
+
+	tcf_destroy_chain(&q->filter_list);
+
+	for (i = 0; i < q->clhash.hashsize; i++) {
+		hlist_for_each_entry_safe(cl, n, next, &q->clhash.hash[i],
+					  common.hnode) {
+			qfq_destroy_class(sch, cl);
+		}
+	}
+	qdisc_class_hash_destroy(&q->clhash);
+}
+
+static const struct Qdisc_class_ops qfq_class_ops = {
+	.change		= qfq_change_class,
+	.delete		= qfq_delete_class,
+	.get		= qfq_get_class,
+	.put		= qfq_put_class,
+	.tcf_chain	= qfq_tcf_chain,
+	.bind_tcf	= qfq_bind_tcf,
+	.unbind_tcf	= qfq_unbind_tcf,
+	.graft		= qfq_graft_class,
+	.leaf		= qfq_class_leaf,
+	.qlen_notify	= qfq_qlen_notify,
+	.dump		= qfq_dump_class,
+	.dump_stats	= qfq_dump_class_stats,
+	.walk		= qfq_walk,
+};
+
+static struct Qdisc_ops qfq_qdisc_ops __read_mostly = {
+	.cl_ops		= &qfq_class_ops,
+	.id		= "qfq",
+	.priv_size	= sizeof(struct qfq_sched),
+	.enqueue	= qfq_enqueue,
+	.dequeue	= qfq_dequeue,
+	.peek		= qdisc_peek_dequeued,
+	.drop		= qfq_drop,
+	.init		= qfq_init_qdisc,
+	.reset		= qfq_reset_qdisc,
+	.destroy	= qfq_destroy_qdisc,
+	.owner		= THIS_MODULE,
+};
+
+static int __init qfq_init(void)
+{
+	return register_qdisc(&qfq_qdisc_ops);
+}
+
+static void __exit qfq_exit(void)
+{
+	unregister_qdisc(&qfq_qdisc_ops);
+}
+
+module_init(qfq_init);
+module_exit(qfq_exit);
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-58-ga151


From 4dd365fd55991b4e54a1d1c255081e6370b9da29 Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Wed, 30 Mar 2011 18:01:15 -0700
Subject: ieee80211: add HT extended capabilities masks

IEEE Std 802.11n, Oct. 29, 2009:
7.3.2.56.5 HT Extended Capabilities field

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 2d1c6117d92c..79690b710665 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -884,6 +884,15 @@ struct ieee80211_ht_cap {
 #define IEEE80211_HT_CAP_40MHZ_INTOLERANT	0x4000
 #define IEEE80211_HT_CAP_LSIG_TXOP_PROT		0x8000
 
+/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */
+#define IEEE80211_HT_EXT_CAP_PCO		0x0001
+#define IEEE80211_HT_EXT_CAP_PCO_TIME		0x0006
+#define		IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT	1
+#define IEEE80211_HT_EXT_CAP_MCS_FB		0x0300
+#define		IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT	8
+#define IEEE80211_HT_EXT_CAP_HTC_SUP		0x0400
+#define IEEE80211_HT_EXT_CAP_RD_RESPONDER	0x0800
+
 /* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
 #define IEEE80211_HT_AMPDU_PARM_FACTOR		0x03
 #define IEEE80211_HT_AMPDU_PARM_DENSITY		0x1C
-- 
cgit v1.2.3-58-ga151


From ce57d9e694d98e421e329fbac5d6f5dc5e9e101e Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 1 Apr 2011 12:06:48 +0200
Subject: ssb: trivial: use u8 for chip_rev (it's mask is 0xF)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/scan.c      | 2 +-
 include/linux/ssb/ssb.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index 29884c00c4d5..7dca719fbcfb 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -307,7 +307,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 	} else {
 		if (bus->bustype == SSB_BUSTYPE_PCI) {
 			bus->chip_id = pcidev_to_chipid(bus->host_pci);
-			pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
+			pci_read_config_byte(bus->host_pci, PCI_REVISION_ID,
 					     &bus->chip_rev);
 			bus->chip_package = 0;
 		} else {
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 9659eff52ca2..7e99b348834c 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -308,7 +308,7 @@ struct ssb_bus {
 
 	/* ID information about the Chip. */
 	u16 chip_id;
-	u16 chip_rev;
+	u8 chip_rev;
 	u16 sprom_offset;
 	u16 sprom_size;		/* number of words in sprom */
 	u8 chip_package;
-- 
cgit v1.2.3-58-ga151


From c6e1a0d12ca7b4f22c58e55a16beacfb7d3d8462 Mon Sep 17 00:00:00 2001
From: Tom Herbert <therbert@google.com>
Date: Mon, 4 Apr 2011 22:30:30 -0700
Subject: net: Allow no-cache copy from user on transmit

This patch uses __copy_from_user_nocache on transmit to bypass data
cache for a performance improvement.  skb_add_data_nocache and
skb_copy_to_page_nocache can be called by sendmsg functions to use
this feature, initial support is in tcp_sendmsg.  This functionality is
configurable per device using ethtool.

Presumably, this feature would only be useful when the driver does
not touch the data.  The feature is turned on by default if a device
indicates that it does some form of checksum offload; it is off by
default for devices that do no checksum offload or indicate no checksum
is necessary.  For the former case copy-checksum is probably done
anyway, in the latter case the device is likely loopback in which case
the no cache copy is probably not beneficial.

This patch was tested using 200 instances of netperf TCP_RR with
1400 byte request and one byte reply.  Platform is 16 core AMD x86.

No-cache copy disabled:
   672703 tps, 97.13% utilization
   50/90/99% latency:244.31 484.205 1028.41

No-cache copy enabled:
   702113 tps, 96.16% utilization,
   50/90/99% latency 238.56 467.56 956.955

Using 14000 byte request and response sizes demonstrate the
effects more dramatically:

No-cache copy disabled:
   79571 tps, 34.34 %utlization
   50/90/95% latency 1584.46 2319.59 5001.76

No-cache copy enabled:
   83856 tps, 34.81% utilization
   50/90/95% latency 2508.42 2622.62 2735.88

Note especially the effect on latency tail (95th percentile).

This seems to provide a nice performance improvement and is
consistent in the tests I ran.  Presumably, this would provide
the greatest benfits in the presence of an application workload
stressing the cache and a lot of transmit data happening.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c |  2 +-
 include/linux/netdevice.h       |  3 ++-
 include/net/sock.h              | 53 +++++++++++++++++++++++++++++++++++++++++
 net/core/dev.c                  | 12 ++++++++++
 net/core/ethtool.c              |  2 +-
 net/ipv4/tcp.c                  |  7 +++---
 6 files changed, 73 insertions(+), 6 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 16d6fe954695..b51e021354b5 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1407,7 +1407,7 @@ static int bond_compute_features(struct bonding *bond)
 	int i;
 
 	features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
-	features |=  NETIF_F_GSO_MASK | NETIF_F_NO_CSUM;
+	features |=  NETIF_F_GSO_MASK | NETIF_F_NO_CSUM | NETIF_F_NOCACHE_COPY;
 
 	if (!bond->first_slave)
 		goto done;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a4664cc68e2b..09d262415769 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1066,6 +1066,7 @@ struct net_device {
 #define NETIF_F_NTUPLE		(1 << 27) /* N-tuple filters supported */
 #define NETIF_F_RXHASH		(1 << 28) /* Receive hashing offload */
 #define NETIF_F_RXCSUM		(1 << 29) /* Receive checksumming offload */
+#define NETIF_F_NOCACHE_COPY	(1 << 30) /* Use no-cache copyfromuser */
 
 	/* Segmentation offload features */
 #define NETIF_F_GSO_SHIFT	16
@@ -1081,7 +1082,7 @@ struct net_device {
 	/* = all defined minus driver/device-class-related */
 #define NETIF_F_NEVER_CHANGE	(NETIF_F_HIGHDMA | NETIF_F_VLAN_CHALLENGED | \
 				  NETIF_F_LLTX | NETIF_F_NETNS_LOCAL)
-#define NETIF_F_ETHTOOL_BITS	(0x3f3fffff & ~NETIF_F_NEVER_CHANGE)
+#define NETIF_F_ETHTOOL_BITS	(0x7f3fffff & ~NETIF_F_NEVER_CHANGE)
 
 	/* List of features with software fallbacks. */
 #define NETIF_F_GSO_SOFTWARE	(NETIF_F_TSO | NETIF_F_TSO_ECN | \
diff --git a/include/net/sock.h b/include/net/sock.h
index da0534d3401c..43bd515e92fd 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -52,6 +52,7 @@
 #include <linux/mm.h>
 #include <linux/security.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <linux/filter.h>
 #include <linux/rculist_nulls.h>
@@ -1389,6 +1390,58 @@ static inline void sk_nocaps_add(struct sock *sk, int flags)
 	sk->sk_route_caps &= ~flags;
 }
 
+static inline int skb_do_copy_data_nocache(struct sock *sk, struct sk_buff *skb,
+					   char __user *from, char *to,
+					   int copy)
+{
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		int err = 0;
+		__wsum csum = csum_and_copy_from_user(from, to, copy, 0, &err);
+		if (err)
+			return err;
+		skb->csum = csum_block_add(skb->csum, csum, skb->len);
+	} else if (sk->sk_route_caps & NETIF_F_NOCACHE_COPY) {
+		if (!access_ok(VERIFY_READ, from, copy) ||
+		    __copy_from_user_nocache(to, from, copy))
+			return -EFAULT;
+	} else if (copy_from_user(to, from, copy))
+		return -EFAULT;
+
+	return 0;
+}
+
+static inline int skb_add_data_nocache(struct sock *sk, struct sk_buff *skb,
+				       char __user *from, int copy)
+{
+	int err;
+
+	err = skb_do_copy_data_nocache(sk, skb, from, skb_put(skb, copy), copy);
+	if (err)
+		__skb_trim(skb, skb->len);
+
+	return err;
+}
+
+static inline int skb_copy_to_page_nocache(struct sock *sk, char __user *from,
+					   struct sk_buff *skb,
+					   struct page *page,
+					   int off, int copy)
+{
+	int err;
+
+	err = skb_do_copy_data_nocache(sk, skb, from,
+				       page_address(page) + off, copy);
+	if (err)
+		return err;
+
+	skb->len	     += copy;
+	skb->data_len	     += copy;
+	skb->truesize	     += copy;
+	sk->sk_wmem_queued   += copy;
+	sk_mem_charge(sk, copy);
+	return 0;
+}
+
 static inline int skb_copy_to_page(struct sock *sk, char __user *from,
 				   struct sk_buff *skb, struct page *page,
 				   int off, int copy)
diff --git a/net/core/dev.c b/net/core/dev.c
index 02f56376fe99..5d0b4f6f1a72 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5425,6 +5425,14 @@ int register_netdevice(struct net_device *dev)
 		dev->features &= ~NETIF_F_GSO;
 	}
 
+	/* Turn on no cache copy if HW is doing checksum */
+	dev->hw_features |= NETIF_F_NOCACHE_COPY;
+	if ((dev->features & NETIF_F_ALL_CSUM) &&
+	    !(dev->features & NETIF_F_NO_CSUM)) {
+		dev->wanted_features |= NETIF_F_NOCACHE_COPY;
+		dev->features |= NETIF_F_NOCACHE_COPY;
+	}
+
 	/* Enable GRO and NETIF_F_HIGHDMA for vlans by default,
 	 * vlan_dev_init() will do the dev->features check, so these features
 	 * are enabled only if supported by underlying device.
@@ -6182,6 +6190,10 @@ u32 netdev_increment_features(u32 all, u32 one, u32 mask)
 		}
 	}
 
+	/* If device can't no cache copy, don't do for all */
+	if (!(one & NETIF_F_NOCACHE_COPY))
+		all &= ~NETIF_F_NOCACHE_COPY;
+
 	one |= NETIF_F_ALL_CSUM;
 
 	one |= all & NETIF_F_ONE_FOR_ALL;
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 439e4b0e1312..719670ae199c 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -359,7 +359,7 @@ static const char netdev_features_strings[ETHTOOL_DEV_FEATURE_WORDS * 32][ETH_GS
 	/* NETIF_F_NTUPLE */          "rx-ntuple-filter",
 	/* NETIF_F_RXHASH */          "rx-hashing",
 	/* NETIF_F_RXCSUM */          "rx-checksum",
-	"",
+	/* NETIF_F_NOCACHE_COPY */    "tx-nocache-copy"
 	"",
 };
 
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index b22d45010545..054a59d21eb0 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -999,7 +999,8 @@ new_segment:
 				/* We have some space in skb head. Superb! */
 				if (copy > skb_tailroom(skb))
 					copy = skb_tailroom(skb);
-				if ((err = skb_add_data(skb, from, copy)) != 0)
+				err = skb_add_data_nocache(sk, skb, from, copy);
+				if (err)
 					goto do_fault;
 			} else {
 				int merge = 0;
@@ -1042,8 +1043,8 @@ new_segment:
 
 				/* Time to copy data. We are close to
 				 * the end! */
-				err = skb_copy_to_page(sk, from, skb, page,
-						       off, copy);
+				err = skb_copy_to_page_nocache(sk, from, skb,
+							       page, off, copy);
 				if (err) {
 					/* If this page was new, give it to the
 					 * socket so it does not get leaked.
-- 
cgit v1.2.3-58-ga151


From e20b5b61a36bd5b80eea064c0f2e73285dbe0d3b Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri, 1 Apr 2011 22:52:34 +0100
Subject: ethtool: Convert struct ethtool_ops comment to kernel-doc format

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
 include/linux/ethtool.h | 80 ++++++++++++++++++++++---------------------------
 1 file changed, 35 insertions(+), 45 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c8fcbdd2b0e7..ab12f84c17bd 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -683,63 +683,53 @@ void ethtool_ntuple_flush(struct net_device *dev);
 bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
 
 /**
- * &ethtool_ops - Alter and report network device settings
- * get_settings: Get device-specific settings
- * set_settings: Set device-specific settings
- * get_drvinfo: Report driver information
- * get_regs: Get device registers
- * get_wol: Report whether Wake-on-Lan is enabled
- * set_wol: Turn Wake-on-Lan on or off
- * get_msglevel: Report driver message level
- * set_msglevel: Set driver message level
- * nway_reset: Restart autonegotiation
- * get_link: Get link status
- * get_eeprom: Read data from the device EEPROM
- * set_eeprom: Write data to the device EEPROM
- * get_coalesce: Get interrupt coalescing parameters
- * set_coalesce: Set interrupt coalescing parameters
- * get_ringparam: Report ring sizes
- * set_ringparam: Set ring sizes
- * get_pauseparam: Report pause parameters
- * set_pauseparam: Set pause parameters
- * get_rx_csum: Report whether receive checksums are turned on or off
- * set_rx_csum: Turn receive checksum on or off
- * get_tx_csum: Report whether transmit checksums are turned on or off
- * set_tx_csum: Turn transmit checksums on or off
- * get_sg: Report whether scatter-gather is enabled
- * set_sg: Turn scatter-gather on or off
- * get_tso: Report whether TCP segmentation offload is enabled
- * set_tso: Turn TCP segmentation offload on or off
- * get_ufo: Report whether UDP fragmentation offload is enabled
- * set_ufo: Turn UDP fragmentation offload on or off
- * self_test: Run specified self-tests
- * get_strings: Return a set of strings that describe the requested objects
- * phys_id: Identify the device
- * get_stats: Return statistics about the device
- * get_flags: get 32-bit flags bitmap
- * set_flags: set 32-bit flags bitmap
- *
- * Description:
- *
- * get_settings:
+ * struct ethtool_ops - Alter and report network device settings
+ * @get_settings: Get device-specific settings.
  *	@get_settings is passed an &ethtool_cmd to fill in.  It returns
  *	an negative errno or zero.
- *
- * set_settings:
+ * @set_settings: Set device-specific settings.
  *	@set_settings is passed an &ethtool_cmd and should attempt to set
  *	all the settings this device supports.  It may return an error value
  *	if something goes wrong (otherwise 0).
- *
- * get_eeprom:
+ * @get_drvinfo: Report driver information
+ * @get_regs: Get device registers
+ * @get_wol: Report whether Wake-on-Lan is enabled
+ * @set_wol: Turn Wake-on-Lan on or off
+ * @get_msglevel: Report driver message level
+ * @set_msglevel: Set driver message level
+ * @nway_reset: Restart autonegotiation
+ * @get_link: Get link status
+ * @get_eeprom: Read data from the device EEPROM.
  *	Should fill in the magic field.  Don't need to check len for zero
  *	or wraparound.  Fill in the data argument with the eeprom values
  *	from offset to offset + len.  Update len to the amount read.
  *	Returns an error or zero.
- *
- * set_eeprom:
+ * @set_eeprom: Write data to the device EEPROM.
  *	Should validate the magic field.  Don't need to check len for zero
  *	or wraparound.  Update len to the amount written.  Returns an error
  *	or zero.
+ * @get_coalesce: Get interrupt coalescing parameters
+ * @set_coalesce: Set interrupt coalescing parameters
+ * @get_ringparam: Report ring sizes
+ * @set_ringparam: Set ring sizes
+ * @get_pauseparam: Report pause parameters
+ * @set_pauseparam: Set pause parameters
+ * @get_rx_csum: Report whether receive checksums are turned on or off
+ * @set_rx_csum: Turn receive checksum on or off
+ * @get_tx_csum: Report whether transmit checksums are turned on or off
+ * @set_tx_csum: Turn transmit checksums on or off
+ * @get_sg: Report whether scatter-gather is enabled
+ * @set_sg: Turn scatter-gather on or off
+ * @get_tso: Report whether TCP segmentation offload is enabled
+ * @set_tso: Turn TCP segmentation offload on or off
+ * @get_ufo: Report whether UDP fragmentation offload is enabled
+ * @set_ufo: Turn UDP fragmentation offload on or off
+ * @self_test: Run specified self-tests
+ * @get_strings: Return a set of strings that describe the requested objects
+ * @phys_id: Identify the device
+ * @get_stats: Return statistics about the device
+ * @get_flags: get 32-bit flags bitmap
+ * @set_flags: set 32-bit flags bitmap
  */
 struct ethtool_ops {
 	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
-- 
cgit v1.2.3-58-ga151


From 8717d07b1143e0f150921f5bd7cfe7af579a995a Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri, 1 Apr 2011 23:57:41 +0100
Subject: ethtool: Fill out and update comment for struct ethtool_ops

Briefly document all operations (except get_rx_ntuple), including
whether they may return an error code and whether they are deprecated.
Also mention some things that should be handled by the ethtool core
rather than by drivers.

Briefly document general requirements for callers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
 include/linux/ethtool.h | 124 ++++++++++++++++++++++++++++++++++++------------
 1 file changed, 93 insertions(+), 31 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index ab12f84c17bd..ead7dcb1bf1e 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -683,22 +683,28 @@ void ethtool_ntuple_flush(struct net_device *dev);
 bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
 
 /**
- * struct ethtool_ops - Alter and report network device settings
- * @get_settings: Get device-specific settings.
- *	@get_settings is passed an &ethtool_cmd to fill in.  It returns
- *	an negative errno or zero.
- * @set_settings: Set device-specific settings.
- *	@set_settings is passed an &ethtool_cmd and should attempt to set
- *	all the settings this device supports.  It may return an error value
- *	if something goes wrong (otherwise 0).
- * @get_drvinfo: Report driver information
+ * struct ethtool_ops - optional netdev operations
+ * @get_settings: Get various device settings including Ethernet link
+ *	settings.  Returns a negative error code or zero.
+ * @set_settings: Set various device settings including Ethernet link
+ *	settings.  Returns a negative error code or zero.
+ * @get_drvinfo: Report driver/device information.  Should only set the
+ *	@driver, @version, @fw_version and @bus_info fields.  If not
+ *	implemented, the @driver and @bus_info fields will be filled in
+ *	according to the netdev's parent device.
+ * @get_regs_len: Get buffer length required for @get_regs
  * @get_regs: Get device registers
  * @get_wol: Report whether Wake-on-Lan is enabled
- * @set_wol: Turn Wake-on-Lan on or off
- * @get_msglevel: Report driver message level
+ * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
+ *	or zero.
+ * @get_msglevel: Report driver message level.  This should be the value
+ *	of the @msg_enable field used by netif logging functions.
  * @set_msglevel: Set driver message level
- * @nway_reset: Restart autonegotiation
- * @get_link: Get link status
+ * @nway_reset: Restart autonegotiation.  Returns a negative error code
+ *	or zero.
+ * @get_link: Report whether physical link is up.  Will only be called if
+ *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
+ *	which uses netif_carrier_ok().
  * @get_eeprom: Read data from the device EEPROM.
  *	Should fill in the magic field.  Don't need to check len for zero
  *	or wraparound.  Fill in the data argument with the eeprom values
@@ -708,28 +714,84 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
  *	Should validate the magic field.  Don't need to check len for zero
  *	or wraparound.  Update len to the amount written.  Returns an error
  *	or zero.
- * @get_coalesce: Get interrupt coalescing parameters
- * @set_coalesce: Set interrupt coalescing parameters
+ * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
  * @get_ringparam: Report ring sizes
- * @set_ringparam: Set ring sizes
+ * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
  * @get_pauseparam: Report pause parameters
- * @set_pauseparam: Set pause parameters
- * @get_rx_csum: Report whether receive checksums are turned on or off
- * @set_rx_csum: Turn receive checksum on or off
- * @get_tx_csum: Report whether transmit checksums are turned on or off
- * @set_tx_csum: Turn transmit checksums on or off
- * @get_sg: Report whether scatter-gather is enabled
- * @set_sg: Turn scatter-gather on or off
- * @get_tso: Report whether TCP segmentation offload is enabled
- * @set_tso: Turn TCP segmentation offload on or off
- * @get_ufo: Report whether UDP fragmentation offload is enabled
- * @set_ufo: Turn UDP fragmentation offload on or off
+ * @set_pauseparam: Set pause parameters.  Returns a negative error code
+ *	or zero.
+ * @get_rx_csum: Deprecated in favour of the netdev feature %NETIF_F_RXCSUM.
+ *	Report whether receive checksums are turned on or off.
+ * @set_rx_csum: Deprecated in favour of generic netdev features.  Turn
+ *	receive checksum on or off.  Returns a negative error code or zero.
+ * @get_tx_csum: Deprecated as redundant. Report whether transmit checksums
+ *	are turned on or off.
+ * @set_tx_csum: Deprecated in favour of generic netdev features.  Turn
+ *	transmit checksums on or off.  Returns a egative error code or zero.
+ * @get_sg: Deprecated as redundant.  Report whether scatter-gather is
+ *	enabled.  
+ * @set_sg: Deprecated in favour of generic netdev features.  Turn
+ *	scatter-gather on or off. Returns a negative error code or zero.
+ * @get_tso: Deprecated as redundant.  Report whether TCP segmentation
+ *	offload is enabled.
+ * @set_tso: Deprecated in favour of generic netdev features.  Turn TCP
+ *	segmentation offload on or off.  Returns a negative error code or zero.
  * @self_test: Run specified self-tests
  * @get_strings: Return a set of strings that describe the requested objects
- * @phys_id: Identify the device
- * @get_stats: Return statistics about the device
- * @get_flags: get 32-bit flags bitmap
- * @set_flags: set 32-bit flags bitmap
+ * @phys_id: Identify the physical device, e.g. by flashing an LED
+ *	attached to it until interrupted by a signal or the given time
+ *	(in seconds) elapses.  If the given time is zero, use a default
+ *	time limit.  Returns a negative error code or zero.  Being
+ *	interrupted by a signal is not an error.
+ * @get_ethtool_stats: Return extended statistics about the device.
+ *	This is only useful if the device maintains statistics not
+ *	included in &struct rtnl_link_stats64.
+ * @begin: Function to be called before any other operation.  Returns a
+ *	negative error code or zero.
+ * @complete: Function to be called after any other operation except
+ *	@begin.  Will be called even if the other operation failed.
+ * @get_ufo: Deprecated as redundant.  Report whether UDP fragmentation
+ *	offload is enabled.
+ * @set_ufo: Deprecated in favour of generic netdev features.  Turn UDP
+ *	fragmentation offload on or off.  Returns a negative error code or zero.
+ * @get_flags: Deprecated as redundant.  Report features included in
+ *	&enum ethtool_flags that are enabled.  
+ * @set_flags: Deprecated in favour of generic netdev features.  Turn
+ *	features included in &enum ethtool_flags on or off.  Returns a
+ *	negative error code or zero.
+ * @get_priv_flags: Report driver-specific feature flags.
+ * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
+ *	error code or zero.
+ * @get_sset_count: Get number of strings that @get_strings will write.
+ * @get_rxnfc: Get RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @set_rxnfc: Set RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @flash_device: Write a firmware image to device's flash memory.
+ *	Returns a negative error code or zero.
+ * @reset: Reset (part of) the device, as specified by a bitmask of
+ *	flags from &enum ethtool_reset_flags.  Returns a negative
+ *	error code or zero.
+ * @set_rx_ntuple: Set an RX n-tuple rule.  Returns a negative error code
+ *	or zero.
+ * @get_rx_ntuple: Deprecated.
+ * @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
+ *	Returns a negative error code or zero.
+ * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
+ *	Returns a negative error code or zero.
+ *
+ * All operations are optional (i.e. the function pointer may be set
+ * to %NULL) and callers must take this into account.  Callers must
+ * hold the RTNL, except that for @get_drvinfo the caller may or may
+ * not hold the RTNL.
+ *
+ * See the structures used by these operations for further documentation.
+ *
+ * See &struct net_device and &struct net_device_ops for documentation
+ * of the generic netdev features interface.
  */
 struct ethtool_ops {
 	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
-- 
cgit v1.2.3-58-ga151


From 68f512f21a64c9b264df6c61a9333e7890faf74b Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Sat, 2 Apr 2011 00:35:15 +0100
Subject: ethtool: Change ETHTOOL_PHYS_ID implementation to allow dropping RTNL

The ethtool ETHTOOL_PHYS_ID command runs for an arbitrarily long
period of time, holding the RTNL lock.  This blocks routing updates,
device enumeration, and various important operations that one might
want to keep running while hunting for the flashing LED.

We need to drop the RTNL lock during this operation, but currently the
core implementation is a thin wrapper around a driver operation and
drivers may well depend upon holding the lock.

Define a new driver operation 'set_phys_id' with an argument that sets
the ID indicator on/off/inactive/active (the last optional, for any
driver or firmware that prefers to handle blinking asynchronously).
When this is defined, the ethtool core drops the lock while waiting
and only acquires it around calls to this operation.

Deprecate the 'phys_id' operation in favour of this.  It can be
removed once all in-tree drivers are converted.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
 include/linux/ethtool.h | 30 ++++++++++++++++++++++++++-
 net/core/ethtool.c      | 55 +++++++++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 82 insertions(+), 3 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index ead7dcb1bf1e..c04d1316d221 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -663,6 +663,22 @@ struct ethtool_rx_ntuple_list {
 	unsigned int		count;
 };
 
+/**
+ * enum ethtool_phys_id_state - indicator state for physical identification
+ * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
+ * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
+ * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ */
+enum ethtool_phys_id_state {
+	ETHTOOL_ID_INACTIVE,
+	ETHTOOL_ID_ACTIVE,
+	ETHTOOL_ID_ON,
+	ETHTOOL_ID_OFF
+};
+
 struct net_device;
 
 /* Some generic methods drivers may use in their ethtool_ops */
@@ -741,7 +757,18 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
  *	segmentation offload on or off.  Returns a negative error code or zero.
  * @self_test: Run specified self-tests
  * @get_strings: Return a set of strings that describe the requested objects
- * @phys_id: Identify the physical device, e.g. by flashing an LED
+ * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
+ *	attached to it.  The implementation may update the indicator
+ *	asynchronously or synchronously, but in either case it must return
+ *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
+ *	and must either activate asynchronous updates or return -%EINVAL.
+ *	If it returns -%EINVAL then it will be called again at intervals with
+ *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
+ *	the indicator accordingly.  Finally, it is called with the argument
+ *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
+ *	negative error code or zero.
+ * @phys_id: Deprecated in favour of @set_phys_id.
+ *	Identify the physical device, e.g. by flashing an LED
  *	attached to it until interrupted by a signal or the given time
  *	(in seconds) elapses.  If the given time is zero, use a default
  *	time limit.  Returns a negative error code or zero.  Being
@@ -830,6 +857,7 @@ struct ethtool_ops {
 	int	(*set_tso)(struct net_device *, u32);
 	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
 	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
+	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
 	int	(*phys_id)(struct net_device *, u32);
 	void	(*get_ethtool_stats)(struct net_device *,
 				     struct ethtool_stats *, u64 *);
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 74ead9eca126..1c95f0fb8b3a 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -21,6 +21,8 @@
 #include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/sched.h>
 
 /*
  * Some useful ethtool_ops methods that're device independent.
@@ -1618,14 +1620,63 @@ out:
 static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_value id;
+	static bool busy;
+	int rc;
 
-	if (!dev->ethtool_ops->phys_id)
+	if (!dev->ethtool_ops->set_phys_id && !dev->ethtool_ops->phys_id)
 		return -EOPNOTSUPP;
 
+	if (busy)
+		return -EBUSY;
+
 	if (copy_from_user(&id, useraddr, sizeof(id)))
 		return -EFAULT;
 
-	return dev->ethtool_ops->phys_id(dev, id.data);
+	if (!dev->ethtool_ops->set_phys_id)
+		/* Do it the old way */
+		return dev->ethtool_ops->phys_id(dev, id.data);
+
+	rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE);
+	if (rc && rc != -EINVAL)
+		return rc;
+
+	/* Drop the RTNL lock while waiting, but prevent reentry or
+	 * removal of the device.
+	 */
+	busy = true;
+	dev_hold(dev);
+	rtnl_unlock();
+
+	if (rc == 0) {
+		/* Driver will handle this itself */
+		schedule_timeout_interruptible(
+			id.data ? id.data : MAX_SCHEDULE_TIMEOUT);
+	} else {
+		/* Driver expects to be called periodically */
+		do {
+			rtnl_lock();
+			rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ON);
+			rtnl_unlock();
+			if (rc)
+				break;
+			schedule_timeout_interruptible(HZ / 2);
+
+			rtnl_lock();
+			rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_OFF);
+			rtnl_unlock();
+			if (rc)
+				break;
+			schedule_timeout_interruptible(HZ / 2);
+		} while (!signal_pending(current) &&
+			 (id.data == 0 || --id.data != 0));
+	}
+
+	rtnl_lock();
+	dev_put(dev);
+	busy = false;
+
+	(void)dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_INACTIVE);
+	return rc;
 }
 
 static int ethtool_get_stats(struct net_device *dev, void __user *useraddr)
-- 
cgit v1.2.3-58-ga151


From f4263c9857e6411ef2388868cc6c79a1602a654e Mon Sep 17 00:00:00 2001
From: Paul Stewart <pstew@chromium.org>
Date: Thu, 31 Mar 2011 09:25:41 -0700
Subject: nl80211: Add BSS parameters to station

This allows user-space monitoring of BSS parameters for the associated
station.  This is useful for debugging and verifying that the paramaters
are as expected.

[Exactly the same as before but bundled into a single message]

Signed-off-by: Paul Stewart <pstew@chromium.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 35 ++++++++++++++++++++++++++++++++++-
 include/net/cfg80211.h  | 34 ++++++++++++++++++++++++++++++++++
 net/mac80211/cfg.c      | 13 ++++++++++++-
 net/wireless/nl80211.c  | 21 ++++++++++++++++++++-
 4 files changed, 100 insertions(+), 3 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 30022189104d..16eea7229e99 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1221,6 +1221,36 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_sta_bss_param - BSS information collected by STA
+ *
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
+ */
+enum nl80211_sta_bss_param {
+	__NL80211_STA_BSS_PARAM_INVALID,
+	NL80211_STA_BSS_PARAM_CTS_PROT,
+	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
+	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
+	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+
+	/* keep last */
+	__NL80211_STA_BSS_PARAM_AFTER_LAST,
+	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
+};
+
 /**
  * enum nl80211_sta_info - station information
  *
@@ -1233,7 +1263,7 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_sta_info_txrate.
+ * 	containing info as possible, see &enum nl80211_rate_info
  * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
  *	station)
@@ -1245,6 +1275,8 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
  * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
  *	attribute, like NL80211_STA_INFO_TX_BITRATE.
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
+ *     containing info as possible, see &enum nl80211_sta_bss_param
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1264,6 +1296,7 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_TX_FAILED,
 	NL80211_STA_INFO_SIGNAL_AVG,
 	NL80211_STA_INFO_RX_BITRATE,
+	NL80211_STA_INFO_BSS_PARAM,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2c4530451721..ba7384acf4e0 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -422,6 +422,7 @@ struct station_parameters {
  * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
  * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
  * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
+ * @STATION_INFO_BSS_PARAM: @bss_param filled
  */
 enum station_info_flags {
 	STATION_INFO_INACTIVE_TIME	= 1<<0,
@@ -439,6 +440,7 @@ enum station_info_flags {
 	STATION_INFO_RX_DROP_MISC	= 1<<12,
 	STATION_INFO_SIGNAL_AVG		= 1<<13,
 	STATION_INFO_RX_BITRATE		= 1<<14,
+	STATION_INFO_BSS_PARAM          = 1<<15,
 };
 
 /**
@@ -472,6 +474,37 @@ struct rate_info {
 	u16 legacy;
 };
 
+/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
+ * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
+ * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
+ */
+enum bss_param_flags {
+	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
+	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
+	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
+};
+
+/**
+ * struct sta_bss_parameters - BSS parameters for the attached station
+ *
+ * Information about the currently associated BSS
+ *
+ * @flags: bitflag of flags from &enum bss_param_flags
+ * @dtim_period: DTIM period for the BSS
+ * @beacon_interval: beacon interval
+ */
+struct sta_bss_parameters {
+	u8 flags;
+	u8 dtim_period;
+	u16 beacon_interval;
+};
+
 /**
  * struct station_info - station information
  *
@@ -515,6 +548,7 @@ struct station_info {
 	u32 tx_retries;
 	u32 tx_failed;
 	u32 rx_dropped_misc;
+	struct sta_bss_parameters bss_param;
 
 	int generation;
 };
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 334213571ad0..bf5d28da46e6 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -342,7 +342,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 			STATION_INFO_TX_FAILED |
 			STATION_INFO_TX_BITRATE |
 			STATION_INFO_RX_BITRATE |
-			STATION_INFO_RX_DROP_MISC;
+			STATION_INFO_RX_DROP_MISC |
+			STATION_INFO_BSS_PARAM;
 
 	sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
 	sinfo->rx_bytes = sta->rx_bytes;
@@ -389,6 +390,16 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 		sinfo->plink_state = sta->plink_state;
 #endif
 	}
+
+	sinfo->bss_param.flags = 0;
+	if (sdata->vif.bss_conf.use_cts_prot)
+		sinfo->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT;
+	if (sdata->vif.bss_conf.use_short_preamble)
+		sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
+	if (sdata->vif.bss_conf.use_short_slot)
+		sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
+	sinfo->bss_param.dtim_period = sdata->local->hw.conf.ps_dtim_period;
+	sinfo->bss_param.beacon_interval = sdata->vif.bss_conf.beacon_int;
 }
 
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 40c90fb461c4..297d7ce4117b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2002,7 +2002,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 				const u8 *mac_addr, struct station_info *sinfo)
 {
 	void *hdr;
-	struct nlattr *sinfoattr;
+	struct nlattr *sinfoattr, *bss_param;
 
 	hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
 	if (!hdr)
@@ -2062,6 +2062,25 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 	if (sinfo->filled & STATION_INFO_TX_FAILED)
 		NLA_PUT_U32(msg, NL80211_STA_INFO_TX_FAILED,
 			    sinfo->tx_failed);
+	if (sinfo->filled & STATION_INFO_BSS_PARAM) {
+		bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM);
+		if (!bss_param)
+			goto nla_put_failure;
+
+		if (sinfo->bss_param.flags & BSS_PARAM_FLAGS_CTS_PROT)
+			NLA_PUT_FLAG(msg, NL80211_STA_BSS_PARAM_CTS_PROT);
+		if (sinfo->bss_param.flags & BSS_PARAM_FLAGS_SHORT_PREAMBLE)
+			NLA_PUT_FLAG(msg, NL80211_STA_BSS_PARAM_SHORT_PREAMBLE);
+		if (sinfo->bss_param.flags & BSS_PARAM_FLAGS_SHORT_SLOT_TIME)
+			NLA_PUT_FLAG(msg,
+				     NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME);
+		NLA_PUT_U8(msg, NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+			   sinfo->bss_param.dtim_period);
+		NLA_PUT_U16(msg, NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+			    sinfo->bss_param.beacon_interval);
+
+		nla_nest_end(msg, bss_param);
+	}
 	nla_nest_end(msg, sinfoattr);
 
 	return genlmsg_end(msg, hdr);
-- 
cgit v1.2.3-58-ga151


From 127fe533ae56d7f4e7b5011869870982eba25723 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Fri, 8 Apr 2011 18:01:59 +0000
Subject: v3 ethtool: add ntuple flow specifier data to network flow classifier

This change is meant to add an ntuple data extensions to the rx network flow
classification specifiers.  The idea is to allow ntuple to be displayed via
the network flow classification interface.

The first patch had some left over stuff from the original flow extension
flags I had added.  That bit is removed in this patch.

The second had some left over comments that stated we ignored bits in the
masks when we actually match them.

This work is based on input from Ben Hutchings.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/ethtool.h | 53 +++++++++++++++++++++++++++++--------------------
 net/socket.c            | 14 ++++++-------
 2 files changed, 39 insertions(+), 28 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c04d1316d221..c7eff13d2f34 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -380,27 +380,42 @@ struct ethtool_usrip4_spec {
 	__u8    proto;
 };
 
+union ethtool_flow_union {
+	struct ethtool_tcpip4_spec		tcp_ip4_spec;
+	struct ethtool_tcpip4_spec		udp_ip4_spec;
+	struct ethtool_tcpip4_spec		sctp_ip4_spec;
+	struct ethtool_ah_espip4_spec		ah_ip4_spec;
+	struct ethtool_ah_espip4_spec		esp_ip4_spec;
+	struct ethtool_usrip4_spec		usr_ip4_spec;
+	struct ethhdr				ether_spec;
+	__u8					hdata[60];
+};
+
+struct ethtool_flow_ext {
+	__be16	vlan_etype;
+	__be16	vlan_tci;
+	__be32	data[2];
+};
+
 /**
  * struct ethtool_rx_flow_spec - specification for RX flow filter
  * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
  * @h_u: Flow fields to match (dependent on @flow_type)
- * @m_u: Masks for flow field bits to be ignored
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ *	Note, all additional fields must be ignored unless @flow_type
+ *	includes the %FLOW_EXT flag.
  * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
  *	if packets should be discarded
  * @location: Index of filter in hardware table
  */
 struct ethtool_rx_flow_spec {
 	__u32		flow_type;
-	union {
-		struct ethtool_tcpip4_spec		tcp_ip4_spec;
-		struct ethtool_tcpip4_spec		udp_ip4_spec;
-		struct ethtool_tcpip4_spec		sctp_ip4_spec;
-		struct ethtool_ah_espip4_spec		ah_ip4_spec;
-		struct ethtool_ah_espip4_spec		esp_ip4_spec;
-		struct ethtool_usrip4_spec		usr_ip4_spec;
-		struct ethhdr				ether_spec;
-		__u8					hdata[72];
-	} h_u, m_u;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
 	__u64		ring_cookie;
 	__u32		location;
 };
@@ -458,16 +473,10 @@ struct ethtool_rxnfc {
 
 struct compat_ethtool_rx_flow_spec {
 	u32		flow_type;
-	union {
-		struct ethtool_tcpip4_spec		tcp_ip4_spec;
-		struct ethtool_tcpip4_spec		udp_ip4_spec;
-		struct ethtool_tcpip4_spec		sctp_ip4_spec;
-		struct ethtool_ah_espip4_spec		ah_ip4_spec;
-		struct ethtool_ah_espip4_spec		esp_ip4_spec;
-		struct ethtool_usrip4_spec		usr_ip4_spec;
-		struct ethhdr				ether_spec;
-		u8					hdata[72];
-	} h_u, m_u;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
 	compat_u64	ring_cookie;
 	u32		location;
 };
@@ -1072,6 +1081,8 @@ struct ethtool_ops {
 #define	IPV4_FLOW	0x10	/* hash only */
 #define	IPV6_FLOW	0x11	/* hash only */
 #define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define	FLOW_EXT	0x80000000
 
 /* L3-L4 network traffic flow hash options */
 #define	RXH_L2DA	(1 << 1)
diff --git a/net/socket.c b/net/socket.c
index 5212447c86e7..575c84f2af19 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2643,13 +2643,13 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32)
 		return -EFAULT;
 
 	if (convert_in) {
-		/* We expect there to be holes between fs.m_u and
+		/* We expect there to be holes between fs.m_ext and
 		 * fs.ring_cookie and at the end of fs, but nowhere else.
 		 */
-		BUILD_BUG_ON(offsetof(struct compat_ethtool_rxnfc, fs.m_u) +
-			     sizeof(compat_rxnfc->fs.m_u) !=
-			     offsetof(struct ethtool_rxnfc, fs.m_u) +
-			     sizeof(rxnfc->fs.m_u));
+		BUILD_BUG_ON(offsetof(struct compat_ethtool_rxnfc, fs.m_ext) +
+			     sizeof(compat_rxnfc->fs.m_ext) !=
+			     offsetof(struct ethtool_rxnfc, fs.m_ext) +
+			     sizeof(rxnfc->fs.m_ext));
 		BUILD_BUG_ON(
 			offsetof(struct compat_ethtool_rxnfc, fs.location) -
 			offsetof(struct compat_ethtool_rxnfc, fs.ring_cookie) !=
@@ -2657,7 +2657,7 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32)
 			offsetof(struct ethtool_rxnfc, fs.ring_cookie));
 
 		if (copy_in_user(rxnfc, compat_rxnfc,
-				 (void *)(&rxnfc->fs.m_u + 1) -
+				 (void *)(&rxnfc->fs.m_ext + 1) -
 				 (void *)rxnfc) ||
 		    copy_in_user(&rxnfc->fs.ring_cookie,
 				 &compat_rxnfc->fs.ring_cookie,
@@ -2674,7 +2674,7 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32)
 
 	if (convert_out) {
 		if (copy_in_user(compat_rxnfc, rxnfc,
-				 (const void *)(&rxnfc->fs.m_u + 1) -
+				 (const void *)(&rxnfc->fs.m_ext + 1) -
 				 (const void *)rxnfc) ||
 		    copy_in_user(&compat_rxnfc->fs.ring_cookie,
 				 &rxnfc->fs.ring_cookie,
-- 
cgit v1.2.3-58-ga151


From 581a8b0feeed8877aab3a8ca4c972419790cd07f Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Thu, 7 Apr 2011 15:08:27 -0700
Subject: nl80211: rename NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE

To NL80211_MESH_SETUP_IE. This reflects our ability to insert any ie
into a mesh beacon, not simply path selection ies.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h    |  9 +++++----
 include/net/cfg80211.h     |  8 ++++----
 net/mac80211/cfg.c         | 15 +++++++--------
 net/mac80211/ieee80211_i.h |  4 ++--
 net/mac80211/mesh.c        |  6 +++---
 net/mac80211/mesh_plink.c  |  2 +-
 net/mac80211/tx.c          |  2 +-
 net/wireless/mesh.c        |  4 ++--
 net/wireless/nl80211.c     | 11 ++++++-----
 9 files changed, 31 insertions(+), 30 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 16eea7229e99..ecf6b68a96da 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -545,6 +545,7 @@ enum nl80211_commands {
 /* source-level API compatibility */
 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -1719,9 +1720,9 @@ enum nl80211_meshconf_params {
  * vendor specific path metric or disable it to use the default Airtime
  * metric.
  *
- * @NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE: A vendor specific information
- * element that vendors will use to identify the path selection methods and
- * metrics in use.
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ * robust security network ie, or a vendor specific information element that
+ * vendors will use to identify the path selection methods and metrics in use.
  *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
@@ -1730,7 +1731,7 @@ enum nl80211_mesh_setup_params {
 	__NL80211_MESH_SETUP_INVALID,
 	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
 	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
-	NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE,
+	NL80211_MESH_SETUP_IE,
 
 	/* keep last */
 	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index ba7384acf4e0..1d02ddf5a8a3 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -689,8 +689,8 @@ struct mesh_config {
  * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
  * @path_sel_proto: which path selection protocol to use
  * @path_metric: which metric to use
- * @vendor_ie: vendor information elements (optional)
- * @vendor_ie_len: length of vendor information elements
+ * @ie: vendor information elements (optional)
+ * @ie_len: length of vendor information elements
  *
  * These parameters are fixed when the mesh is created.
  */
@@ -699,8 +699,8 @@ struct mesh_setup {
 	u8 mesh_id_len;
 	u8  path_sel_proto;
 	u8  path_metric;
-	const u8 *vendor_ie;
-	u8 vendor_ie_len;
+	const u8 *ie;
+	u8 ie_len;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index bf5d28da46e6..d9428afd8bf6 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1034,26 +1034,25 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
 	u8 *new_ie;
 	const u8 *old_ie;
 
-	/* first allocate the new vendor information element */
+	/* allocate information elements */
 	new_ie = NULL;
-	old_ie = ifmsh->vendor_ie;
+	old_ie = ifmsh->ie;
 
-	ifmsh->vendor_ie_len = setup->vendor_ie_len;
-	if (setup->vendor_ie_len) {
-		new_ie = kmemdup(setup->vendor_ie, setup->vendor_ie_len,
+	if (setup->ie_len) {
+		new_ie = kmemdup(setup->ie, setup->ie_len,
 				GFP_KERNEL);
 		if (!new_ie)
 			return -ENOMEM;
 	}
+	ifmsh->ie_len = setup->ie_len;
+	ifmsh->ie = new_ie;
+	kfree(old_ie);
 
 	/* now copy the rest of the setup parameters */
 	ifmsh->mesh_id_len = setup->mesh_id_len;
 	memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len);
 	ifmsh->mesh_pp_id = setup->path_sel_proto;
 	ifmsh->mesh_pm_id = setup->path_metric;
-	ifmsh->vendor_ie = new_ie;
-
-	kfree(old_ie);
 
 	return 0;
 }
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6eb2c8523eeb..6450100594ba 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -488,8 +488,8 @@ struct ieee80211_if_mesh {
 	struct mesh_config mshcfg;
 	u32 mesh_seqnum;
 	bool accepting_plinks;
-	const u8 *vendor_ie;
-	u8 vendor_ie_len;
+	const u8 *ie;
+	u8 ie_len;
 };
 
 #ifdef CONFIG_MAC80211_MESH
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 2a57cc02c618..1c244c0c7664 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -279,9 +279,9 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 	    MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
 	*pos++ = 0x00;
 
-	if (sdata->u.mesh.vendor_ie) {
-		int len = sdata->u.mesh.vendor_ie_len;
-		const u8 *data = sdata->u.mesh.vendor_ie;
+	if (sdata->u.mesh.ie) {
+		int len = sdata->u.mesh.ie_len;
+		const u8 *data = sdata->u.mesh.ie;
 		if (skb_tailroom(skb) > len)
 			memcpy(skb_put(skb, len), data, len);
 	}
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 44b53931ba5e..c705b20e1acb 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -161,7 +161,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 		__le16 reason) {
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400 +
-			sdata->u.mesh.vendor_ie_len);
+			sdata->u.mesh.ie_len);
 	struct ieee80211_mgmt *mgmt;
 	bool include_plid = false;
 	static const u8 meshpeeringproto[] = { 0x00, 0x0F, 0xAC, 0x2A };
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index ce4596ed1268..17b10be31f55 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2262,7 +2262,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 
 		/* headroom, head length, tail length and maximum TIM length */
 		skb = dev_alloc_skb(local->tx_headroom + 400 +
-				sdata->u.mesh.vendor_ie_len);
+				sdata->u.mesh.ie_len);
 		if (!skb)
 			goto out;
 
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 73e39c171ffb..0d4b2260f96f 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -53,8 +53,8 @@ const struct mesh_config default_mesh_config = {
 const struct mesh_setup default_mesh_setup = {
 	.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
 	.path_metric = IEEE80211_PATH_METRIC_AIRTIME,
-	.vendor_ie = NULL,
-	.vendor_ie_len = 0,
+	.ie = NULL,
+	.ie_len = 0,
 };
 
 int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 297d7ce4117b..ccd825a5857e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2823,7 +2823,7 @@ static const struct nla_policy
 	nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX+1] = {
 	[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 },
 	[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
-	[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE] = { .type = NLA_BINARY,
+	[NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY,
 		.len = IEEE80211_MAX_DATA_LEN },
 };
 
@@ -2925,13 +2925,14 @@ static int nl80211_parse_mesh_setup(struct genl_info *info,
 		 IEEE80211_PATH_METRIC_VENDOR :
 		 IEEE80211_PATH_METRIC_AIRTIME;
 
-	if (tb[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE]) {
+
+	if (tb[NL80211_MESH_SETUP_IE]) {
 		struct nlattr *ieattr =
-			tb[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE];
+			tb[NL80211_MESH_SETUP_IE];
 		if (!is_valid_ie_attr(ieattr))
 			return -EINVAL;
-		setup->vendor_ie = nla_data(ieattr);
-		setup->vendor_ie_len = nla_len(ieattr);
+		setup->ie = nla_data(ieattr);
+		setup->ie_len = nla_len(ieattr);
 	}
 
 	return 0;
-- 
cgit v1.2.3-58-ga151


From 15d5dda623139bbf6165030fc251bbd5798f4130 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Thu, 7 Apr 2011 15:08:28 -0700
Subject: cfg80211/nl80211: Add userspace authentication flag to mesh setup

During mesh setup, use NL80211_MESH_SETUP_USERSPACE_AUTH flag to create
a secure mesh and route management frames to userspace.

Also, NL80211_CMD_GET_WIPHY now returns a flag NL80211_SUPPORT_MESH_AUTH
if the wiphy's mesh implementation supports routing of mesh auth frames
to userspace.  This is useful for forward compatibility between old
kernels and new userspace tools.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 9 +++++++++
 include/net/cfg80211.h  | 5 +++++
 net/wireless/mesh.c     | 4 ++++
 net/wireless/nl80211.c  | 5 +++++
 4 files changed, 23 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index ecf6b68a96da..0e652d860819 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -887,6 +887,9 @@ enum nl80211_commands {
  *	changed once the mesh is active.
  * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
  *	containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ *	allows auth frames in a mesh to be passed to userspace for processing via
+ *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1075,6 +1078,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
 	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
 
+	NL80211_ATTR_SUPPORT_MESH_AUTH,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1724,6 +1729,9 @@ enum nl80211_meshconf_params {
  * robust security network ie, or a vendor specific information element that
  * vendors will use to identify the path selection methods and metrics in use.
  *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ * daemon will be authenticating mesh candidates.
+ *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
@@ -1732,6 +1740,7 @@ enum nl80211_mesh_setup_params {
 	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
 	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
 	NL80211_MESH_SETUP_IE,
+	NL80211_MESH_SETUP_USERSPACE_AUTH,
 
 	/* keep last */
 	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1d02ddf5a8a3..e77603bd1630 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -691,6 +691,7 @@ struct mesh_config {
  * @path_metric: which metric to use
  * @ie: vendor information elements (optional)
  * @ie_len: length of vendor information elements
+ * @is_secure: or not
  *
  * These parameters are fixed when the mesh is created.
  */
@@ -701,6 +702,7 @@ struct mesh_setup {
 	u8  path_metric;
 	const u8 *ie;
 	u8 ie_len;
+	bool is_secure;
 };
 
 /**
@@ -1451,6 +1453,8 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
  * @WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS: The device supports separate
  *	unicast and multicast TX keys.
+ * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
+ *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1463,6 +1467,7 @@ enum wiphy_flags {
 	WIPHY_FLAG_CONTROL_PORT_PROTOCOL	= BIT(7),
 	WIPHY_FLAG_IBSS_RSN			= BIT(8),
 	WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS= BIT(9),
+	WIPHY_FLAG_MESH_AUTH			= BIT(10),
 };
 
 struct mac_address {
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 0d4b2260f96f..0e5c122ce324 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -72,6 +72,10 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
 		return -EOPNOTSUPP;
 
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
+	      setup->is_secure)
+		return -EOPNOTSUPP;
+
 	if (wdev->mesh_id_len)
 		return -EALREADY;
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ccd825a5857e..cbedfc2a42a2 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -124,6 +124,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_BSS_HT_OPMODE] = { .type = NLA_U16 },
 
 	[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
+	[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
 
 	[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
 					 .len = NL80211_HT_CAPABILITY_LEN },
@@ -594,6 +595,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 	if (dev->wiphy.flags & WIPHY_FLAG_IBSS_RSN)
 		NLA_PUT_FLAG(msg, NL80211_ATTR_SUPPORT_IBSS_RSN);
+	if (dev->wiphy.flags & WIPHY_FLAG_MESH_AUTH)
+		NLA_PUT_FLAG(msg, NL80211_ATTR_SUPPORT_MESH_AUTH);
 
 	NLA_PUT(msg, NL80211_ATTR_CIPHER_SUITES,
 		sizeof(u32) * dev->wiphy.n_cipher_suites,
@@ -2823,6 +2826,7 @@ static const struct nla_policy
 	nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX+1] = {
 	[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 },
 	[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
+	[NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG },
 	[NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY,
 		.len = IEEE80211_MAX_DATA_LEN },
 };
@@ -2934,6 +2938,7 @@ static int nl80211_parse_mesh_setup(struct genl_info *info,
 		setup->ie = nla_data(ieattr);
 		setup->ie_len = nla_len(ieattr);
 	}
+	setup->is_secure = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AUTH]);
 
 	return 0;
 }
-- 
cgit v1.2.3-58-ga151


From b39c48fac1fc915a5dcd024bf6e9aabc855ed591 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Thu, 7 Apr 2011 15:08:30 -0700
Subject: nl80211/mac80211: let userspace authenticate stations

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 2 ++
 net/mac80211/cfg.c      | 6 ++++++
 net/wireless/nl80211.c  | 5 ++++-
 3 files changed, 12 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 0e652d860819..5ec4ac3a0ef4 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1174,6 +1174,7 @@ enum nl80211_iftype {
  *	with short barker preamble
  * @NL80211_STA_FLAG_WME: station is WME/QoS capable
  * @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
@@ -1183,6 +1184,7 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_SHORT_PREAMBLE,
 	NL80211_STA_FLAG_WME,
 	NL80211_STA_FLAG_MFP,
+	NL80211_STA_FLAG_AUTHENTICATED,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index dc623d884d02..1c25723eacda 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -686,6 +686,12 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 		if (set & BIT(NL80211_STA_FLAG_MFP))
 			sta->flags |= WLAN_STA_MFP;
 	}
+
+	if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) {
+		sta->flags &= ~WLAN_STA_AUTH;
+		if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED))
+			sta->flags |= WLAN_STA_AUTH;
+	}
 	spin_unlock_irqrestore(&sta->flaglock, flags);
 
 	/*
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index cbedfc2a42a2..ce29a0d0e88e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1925,6 +1925,7 @@ static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
 	[NL80211_STA_FLAG_SHORT_PREAMBLE] = { .type = NLA_FLAG },
 	[NL80211_STA_FLAG_WME] = { .type = NLA_FLAG },
 	[NL80211_STA_FLAG_MFP] = { .type = NLA_FLAG },
+	[NL80211_STA_FLAG_AUTHENTICATED] = { .type = NLA_FLAG },
 };
 
 static int parse_station_flags(struct genl_info *info,
@@ -2284,7 +2285,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 			err = -EINVAL;
 		if (params.supported_rates)
 			err = -EINVAL;
-		if (params.sta_flags_mask)
+		if (params.sta_flags_mask &
+				~(BIT(NL80211_STA_FLAG_AUTHENTICATED) |
+				  BIT(NL80211_STA_FLAG_AUTHORIZED)))
 			err = -EINVAL;
 		break;
 	default:
-- 
cgit v1.2.3-58-ga151


From c93b5e717ec47b57abfe0229360bc11e77520984 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Thu, 7 Apr 2011 15:08:34 -0700
Subject: nl80211: New notification to discover mesh peer candidates.

Notify userspace when a beacon/presp is received from a suitable mesh
peer candidate for whom no sta information exists.  Userspace can then
decide to create a sta info for the candidate.  If userspace is not
ready to authenticate the peer right away, it can create the sta info
with the authenticated flag unset and set it later.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 12 ++++++++++++
 include/net/cfg80211.h  | 16 ++++++++++++++++
 net/wireless/mesh.c     | 14 ++++++++++++++
 net/wireless/nl80211.c  | 38 ++++++++++++++++++++++++++++++++++++++
 net/wireless/nl80211.h  |  4 ++++
 5 files changed, 84 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 5ec4ac3a0ef4..b87481866dde 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -410,6 +410,16 @@
  *	notification. This event is used to indicate that an unprotected
  *	disassociation frame was dropped when MFP is in use.
  *
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ *      beacon or probe response from a compatible mesh peer.  This is only
+ *      sent while no station information (sta_info) exists for the new peer
+ *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
+ *      reception of this notification, userspace may decide to create a new
+ *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
+ *      reoccurring, the userspace authentication daemon may want to create the
+ *      new station with the AUTHENTICATED flag unset and maybe change it later
+ *      depending on the authentication result.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -522,6 +532,8 @@ enum nl80211_commands {
 	NL80211_CMD_UNPROT_DEAUTHENTICATE,
 	NL80211_CMD_UNPROT_DISASSOCIATE,
 
+	NL80211_CMD_NEW_PEER_CANDIDATE,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e77603bd1630..f40cd30847de 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2488,6 +2488,22 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
  */
 void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
 
+/**
+ * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
+ *
+ * @dev: network device
+ * @macaddr: the MAC address of the new candidate
+ * @ie: information elements advertised by the peer candidate
+ * @ie_len: lenght of the information elements buffer
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the mesh peer candidate has been
+ * detected, most likely via a beacon or, less likely, via a probe response.
+ * cfg80211 then sends a notification to userspace.
+ */
+void cfg80211_notify_new_peer_candidate(struct net_device *dev,
+		const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp);
+
 /**
  * DOC: RFkill integration
  *
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index e0226e8265a3..5c116083eeca 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -1,5 +1,6 @@
 #include <linux/ieee80211.h>
 #include <net/cfg80211.h>
+#include "nl80211.h"
 #include "core.h"
 
 /* Default values, timeouts in ms */
@@ -110,6 +111,19 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 	return err;
 }
 
+void cfg80211_notify_new_peer_candidate(struct net_device *dev,
+		const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_MESH_POINT))
+		return;
+
+	nl80211_send_new_peer_candidate(wiphy_to_dev(wdev->wiphy), dev,
+			macaddr, ie, ie_len, gfp);
+}
+EXPORT_SYMBOL(cfg80211_notify_new_peer_candidate);
+
 static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
 				 struct net_device *dev)
 {
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f4cb8efe2e5f..58f501a35022 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -5818,6 +5818,44 @@ void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
 	nlmsg_free(msg);
 }
 
+void nl80211_send_new_peer_candidate(struct cfg80211_registered_device *rdev,
+		struct net_device *netdev,
+		const u8 *macaddr, const u8* ie, u8 ie_len,
+		gfp_t gfp)
+{
+	struct sk_buff *msg;
+	void *hdr;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_NEW_PEER_CANDIDATE);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+	NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, macaddr);
+	if (ie_len && ie)
+		NLA_PUT(msg, NL80211_ATTR_IE, ie_len , ie);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, gfp);
+	return;
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
 void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
 				 struct net_device *netdev, const u8 *addr,
 				 enum nl80211_key_type key_type, int key_id,
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index dcac5cd6f017..f2af6955a665 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -50,6 +50,10 @@ void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
 			       struct net_device *netdev, u16 reason,
 			       const u8 *ie, size_t ie_len, bool from_ap);
 
+void nl80211_send_new_peer_candidate(struct cfg80211_registered_device *rdev,
+				     struct net_device *netdev,
+				     const u8 *macaddr, const u8* ie, u8 ie_len,
+				     gfp_t gfp);
 void
 nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
 			    struct net_device *netdev, const u8 *addr,
-- 
cgit v1.2.3-58-ga151


From ebe27c91af8b7f4810ae906fbd3eeb2d87850026 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Date: Fri, 8 Apr 2011 21:24:24 +0530
Subject: {mac|nl}80211: Add station connected time

Add station connected time in debugfs. This will be helpful to get a
measure of stability of the connection and for debugging stress issues

Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h    |  2 ++
 include/net/cfg80211.h     |  4 ++++
 net/mac80211/cfg.c         |  7 ++++++-
 net/mac80211/debugfs_sta.c | 26 ++++++++++++++++++++++++++
 net/mac80211/sta_info.c    |  3 +++
 net/mac80211/sta_info.h    |  2 ++
 net/wireless/nl80211.c     |  3 +++
 7 files changed, 46 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index b87481866dde..be8df57b789d 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1297,6 +1297,7 @@ enum nl80211_sta_bss_param {
  *	attribute, like NL80211_STA_INFO_TX_BITRATE.
  * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
  *     containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1317,6 +1318,7 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_SIGNAL_AVG,
 	NL80211_STA_INFO_RX_BITRATE,
 	NL80211_STA_INFO_BSS_PARAM,
+	NL80211_STA_INFO_CONNECTED_TIME,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f40cd30847de..d30eada7c6cd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -423,6 +423,7 @@ struct station_parameters {
  * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
  * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
  * @STATION_INFO_BSS_PARAM: @bss_param filled
+ * @STATION_INFO_CONNECTED_TIME: @connected_time filled
  */
 enum station_info_flags {
 	STATION_INFO_INACTIVE_TIME	= 1<<0,
@@ -441,6 +442,7 @@ enum station_info_flags {
 	STATION_INFO_SIGNAL_AVG		= 1<<13,
 	STATION_INFO_RX_BITRATE		= 1<<14,
 	STATION_INFO_BSS_PARAM          = 1<<15,
+	STATION_INFO_CONNECTED_TIME	= 1<<16
 };
 
 /**
@@ -511,6 +513,7 @@ struct sta_bss_parameters {
  * Station information filled by driver for get_station() and dump_station.
  *
  * @filled: bitflag of flags from &enum station_info_flags
+ * @connected_time: time(in secs) since a station is last connected
  * @inactive_time: time since last station activity (tx/rx) in milliseconds
  * @rx_bytes: bytes received from this station
  * @tx_bytes: bytes transmitted to this station
@@ -533,6 +536,7 @@ struct sta_bss_parameters {
  */
 struct station_info {
 	u32 filled;
+	u32 connected_time;
 	u32 inactive_time;
 	u32 rx_bytes;
 	u32 tx_bytes;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 1c25723eacda..a6d191f2a0fe 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -330,6 +330,7 @@ static void rate_idx_to_bitrate(struct rate_info *rate, struct sta_info *sta, in
 static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 {
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct timespec uptime;
 
 	sinfo->generation = sdata->local->sta_generation;
 
@@ -343,7 +344,11 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 			STATION_INFO_TX_BITRATE |
 			STATION_INFO_RX_BITRATE |
 			STATION_INFO_RX_DROP_MISC |
-			STATION_INFO_BSS_PARAM;
+			STATION_INFO_BSS_PARAM |
+			STATION_INFO_CONNECTED_TIME;
+
+	do_posix_clock_monotonic_gettime(&uptime);
+	sinfo->connected_time = uptime.tv_sec - sta->last_connected;
 
 	sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
 	sinfo->rx_bytes = sta->rx_bytes;
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index c04a1396cf8d..c008232731eb 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -92,6 +92,31 @@ static ssize_t sta_inactive_ms_read(struct file *file, char __user *userbuf,
 }
 STA_OPS(inactive_ms);
 
+
+static ssize_t sta_connected_time_read(struct file *file, char __user *userbuf,
+					size_t count, loff_t *ppos)
+{
+	struct sta_info *sta = file->private_data;
+	struct timespec uptime;
+	struct tm result;
+	long connected_time_secs;
+	char buf[100];
+	int res;
+	do_posix_clock_monotonic_gettime(&uptime);
+	connected_time_secs = uptime.tv_sec - sta->last_connected;
+	time_to_tm(connected_time_secs, 0, &result);
+	result.tm_year -= 70;
+	result.tm_mday -= 1;
+	res = scnprintf(buf, sizeof(buf),
+		"years  - %d\nmonths - %d\ndays   - %d\nclock  - %d:%d:%d\n\n",
+			result.tm_year, result.tm_mon, result.tm_mday,
+			result.tm_hour, result.tm_min, result.tm_sec);
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+STA_OPS(connected_time);
+
+
+
 static ssize_t sta_last_seq_ctrl_read(struct file *file, char __user *userbuf,
 				      size_t count, loff_t *ppos)
 {
@@ -324,6 +349,7 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta)
 	DEBUGFS_ADD(flags);
 	DEBUGFS_ADD(num_ps_buf_frames);
 	DEBUGFS_ADD(inactive_ms);
+	DEBUGFS_ADD(connected_time);
 	DEBUGFS_ADD(last_seq_ctrl);
 	DEBUGFS_ADD(agg_status);
 	DEBUGFS_ADD(dev);
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 999f8fbf0b4b..8a9068ac0673 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -228,6 +228,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
+	struct timespec uptime;
 	int i;
 
 	sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp);
@@ -245,6 +246,8 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	sta->sdata = sdata;
 	sta->last_rx = jiffies;
 
+	do_posix_clock_monotonic_gettime(&uptime);
+	sta->last_connected = uptime.tv_sec;
 	ewma_init(&sta->avg_signal, 1024, 8);
 
 	if (sta_prepare_rate_control(local, sta, gfp)) {
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 43238e99cfb3..984a03db3553 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -226,6 +226,7 @@ enum plink_state {
  * @rx_bytes: Number of bytes received from this STA
  * @wep_weak_iv_count: number of weak WEP IVs received from this station
  * @last_rx: time (in jiffies) when last frame was received from this STA
+ * @last_connected: time (in seconds) when a station got connected
  * @num_duplicates: number of duplicate frames received from this STA
  * @rx_fragments: number of received MPDUs
  * @rx_dropped: number of dropped MPDUs from this STA
@@ -295,6 +296,7 @@ struct sta_info {
 	unsigned long rx_packets, rx_bytes;
 	unsigned long wep_weak_iv_count;
 	unsigned long last_rx;
+	long last_connected;
 	unsigned long num_duplicates;
 	unsigned long rx_fragments;
 	unsigned long rx_dropped;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 58f501a35022..0efa7fd01150 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2020,6 +2020,9 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 	sinfoattr = nla_nest_start(msg, NL80211_ATTR_STA_INFO);
 	if (!sinfoattr)
 		goto nla_put_failure;
+	if (sinfo->filled & STATION_INFO_CONNECTED_TIME)
+		NLA_PUT_U32(msg, NL80211_STA_INFO_CONNECTED_TIME,
+			    sinfo->connected_time);
 	if (sinfo->filled & STATION_INFO_INACTIVE_TIME)
 		NLA_PUT_U32(msg, NL80211_STA_INFO_INACTIVE_TIME,
 			    sinfo->inactive_time);
-- 
cgit v1.2.3-58-ga151


From bcc6d47903612c3861201cc3a866fb604f26b8b2 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Thu, 7 Apr 2011 19:48:33 +0000
Subject: net: vlan: make non-hw-accel rx path similar to hw-accel

Now there are 2 paths for rx vlan frames. When rx-vlan-hw-accel is
enabled, skb is untagged by NIC, vlan_tci is set and the skb gets into
vlan code in __netif_receive_skb - vlan_hwaccel_do_receive.

For non-rx-vlan-hw-accel however, tagged skb goes thru whole
__netif_receive_skb, it's untagged in ptype_base hander and reinjected

This incosistency is fixed by this patch. Vlan untagging happens early in
__netif_receive_skb so the rest of code (ptype_all handlers, rx_handlers)
see the skb like it was untagged by hw.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>

v1->v2:
	remove "inline" from vlan_core.c functions
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/if_vlan.h |  10 ++-
 net/8021q/vlan.c        |   8 ---
 net/8021q/vlan.h        |   2 -
 net/8021q/vlan_core.c   |  85 +++++++++++++++++++++++-
 net/8021q/vlan_dev.c    | 173 ------------------------------------------------
 net/core/dev.c          |   8 ++-
 6 files changed, 99 insertions(+), 187 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 635e1faec412..998b29930b80 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -132,7 +132,8 @@ extern u16 vlan_dev_vlan_id(const struct net_device *dev);
 
 extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
 			     u16 vlan_tci, int polling);
-extern bool vlan_hwaccel_do_receive(struct sk_buff **skb);
+extern bool vlan_do_receive(struct sk_buff **skb);
+extern struct sk_buff *vlan_untag(struct sk_buff *skb);
 extern gro_result_t
 vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
 		 unsigned int vlan_tci, struct sk_buff *skb);
@@ -166,13 +167,18 @@ static inline int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
 	return NET_XMIT_SUCCESS;
 }
 
-static inline bool vlan_hwaccel_do_receive(struct sk_buff **skb)
+static inline bool vlan_do_receive(struct sk_buff **skb)
 {
 	if ((*skb)->vlan_tci & VLAN_VID_MASK)
 		(*skb)->pkt_type = PACKET_OTHERHOST;
 	return false;
 }
 
+inline struct sk_buff *vlan_untag(struct sk_buff *skb)
+{
+	return skb;
+}
+
 static inline gro_result_t
 vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
 		 unsigned int vlan_tci, struct sk_buff *skb)
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index e47600b4e2e3..14ef5efbc653 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -49,11 +49,6 @@ const char vlan_version[] = DRV_VERSION;
 static const char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>";
 static const char vlan_buggyright[] = "David S. Miller <davem@redhat.com>";
 
-static struct packet_type vlan_packet_type __read_mostly = {
-	.type = cpu_to_be16(ETH_P_8021Q),
-	.func = vlan_skb_recv, /* VLAN receive method */
-};
-
 /* End of global variables definitions. */
 
 static void vlan_group_free(struct vlan_group *grp)
@@ -684,7 +679,6 @@ static int __init vlan_proto_init(void)
 	if (err < 0)
 		goto err4;
 
-	dev_add_pack(&vlan_packet_type);
 	vlan_ioctl_set(vlan_ioctl_handler);
 	return 0;
 
@@ -705,8 +699,6 @@ static void __exit vlan_cleanup_module(void)
 
 	unregister_netdevice_notifier(&vlan_notifier_block);
 
-	dev_remove_pack(&vlan_packet_type);
-
 	unregister_pernet_subsys(&vlan_net_ops);
 	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 5687c9b95f33..c3408def8a19 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -75,8 +75,6 @@ static inline struct vlan_dev_info *vlan_dev_info(const struct net_device *dev)
 }
 
 /* found in vlan_dev.c */
-int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
-		  struct packet_type *ptype, struct net_device *orig_dev);
 void vlan_dev_set_ingress_priority(const struct net_device *dev,
 				   u32 skb_prio, u16 vlan_prio);
 int vlan_dev_set_egress_priority(const struct net_device *dev,
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index ce8e3ab3e7a5..41495dc2a4c9 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -4,7 +4,7 @@
 #include <linux/netpoll.h>
 #include "vlan.h"
 
-bool vlan_hwaccel_do_receive(struct sk_buff **skbp)
+bool vlan_do_receive(struct sk_buff **skbp)
 {
 	struct sk_buff *skb = *skbp;
 	u16 vlan_id = skb->vlan_tci & VLAN_VID_MASK;
@@ -88,3 +88,86 @@ gro_result_t vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
 	return napi_gro_frags(napi);
 }
 EXPORT_SYMBOL(vlan_gro_frags);
+
+static struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
+{
+	if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
+		if (skb_cow(skb, skb_headroom(skb)) < 0)
+			skb = NULL;
+		if (skb) {
+			/* Lifted from Gleb's VLAN code... */
+			memmove(skb->data - ETH_HLEN,
+				skb->data - VLAN_ETH_HLEN, 12);
+			skb->mac_header += VLAN_HLEN;
+		}
+	}
+	return skb;
+}
+
+static void vlan_set_encap_proto(struct sk_buff *skb, struct vlan_hdr *vhdr)
+{
+	__be16 proto;
+	unsigned char *rawp;
+
+	/*
+	 * Was a VLAN packet, grab the encapsulated protocol, which the layer
+	 * three protocols care about.
+	 */
+
+	proto = vhdr->h_vlan_encapsulated_proto;
+	if (ntohs(proto) >= 1536) {
+		skb->protocol = proto;
+		return;
+	}
+
+	rawp = skb->data;
+	if (*(unsigned short *) rawp == 0xFFFF)
+		/*
+		 * This is a magic hack to spot IPX packets. Older Novell
+		 * breaks the protocol design and runs IPX over 802.3 without
+		 * an 802.2 LLC layer. We look for FFFF which isn't a used
+		 * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
+		 * but does for the rest.
+		 */
+		skb->protocol = htons(ETH_P_802_3);
+	else
+		/*
+		 * Real 802.2 LLC
+		 */
+		skb->protocol = htons(ETH_P_802_2);
+}
+
+struct sk_buff *vlan_untag(struct sk_buff *skb)
+{
+	struct vlan_hdr *vhdr;
+	u16 vlan_tci;
+
+	if (unlikely(vlan_tx_tag_present(skb))) {
+		/* vlan_tci is already set-up so leave this for another time */
+		return skb;
+	}
+
+	skb = skb_share_check(skb, GFP_ATOMIC);
+	if (unlikely(!skb))
+		goto err_free;
+
+	if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
+		goto err_free;
+
+	vhdr = (struct vlan_hdr *) skb->data;
+	vlan_tci = ntohs(vhdr->h_vlan_TCI);
+	__vlan_hwaccel_put_tag(skb, vlan_tci);
+
+	skb_pull_rcsum(skb, VLAN_HLEN);
+	vlan_set_encap_proto(skb, vhdr);
+
+	skb = vlan_check_reorder_header(skb);
+	if (unlikely(!skb))
+		goto err_free;
+
+	return skb;
+
+err_free:
+	kfree_skb(skb);
+	return NULL;
+}
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b84a46b30c0c..d174c312b7f1 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -65,179 +65,6 @@ static int vlan_dev_rebuild_header(struct sk_buff *skb)
 	return 0;
 }
 
-static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
-{
-	if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
-		if (skb_cow(skb, skb_headroom(skb)) < 0)
-			skb = NULL;
-		if (skb) {
-			/* Lifted from Gleb's VLAN code... */
-			memmove(skb->data - ETH_HLEN,
-				skb->data - VLAN_ETH_HLEN, 12);
-			skb->mac_header += VLAN_HLEN;
-		}
-	}
-
-	return skb;
-}
-
-static inline void vlan_set_encap_proto(struct sk_buff *skb,
-		struct vlan_hdr *vhdr)
-{
-	__be16 proto;
-	unsigned char *rawp;
-
-	/*
-	 * Was a VLAN packet, grab the encapsulated protocol, which the layer
-	 * three protocols care about.
-	 */
-
-	proto = vhdr->h_vlan_encapsulated_proto;
-	if (ntohs(proto) >= 1536) {
-		skb->protocol = proto;
-		return;
-	}
-
-	rawp = skb->data;
-	if (*(unsigned short *)rawp == 0xFFFF)
-		/*
-		 * This is a magic hack to spot IPX packets. Older Novell
-		 * breaks the protocol design and runs IPX over 802.3 without
-		 * an 802.2 LLC layer. We look for FFFF which isn't a used
-		 * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
-		 * but does for the rest.
-		 */
-		skb->protocol = htons(ETH_P_802_3);
-	else
-		/*
-		 * Real 802.2 LLC
-		 */
-		skb->protocol = htons(ETH_P_802_2);
-}
-
-/*
- *	Determine the packet's protocol ID. The rule here is that we
- *	assume 802.3 if the type field is short enough to be a length.
- *	This is normal practice and works for any 'now in use' protocol.
- *
- *  Also, at this point we assume that we ARE dealing exclusively with
- *  VLAN packets, or packets that should be made into VLAN packets based
- *  on a default VLAN ID.
- *
- *  NOTE:  Should be similar to ethernet/eth.c.
- *
- *  SANITY NOTE:  This method is called when a packet is moving up the stack
- *                towards userland.  To get here, it would have already passed
- *                through the ethernet/eth.c eth_type_trans() method.
- *  SANITY NOTE 2: We are referencing to the VLAN_HDR frields, which MAY be
- *                 stored UNALIGNED in the memory.  RISC systems don't like
- *                 such cases very much...
- *  SANITY NOTE 2a: According to Dave Miller & Alexey, it will always be
- *  		    aligned, so there doesn't need to be any of the unaligned
- *  		    stuff.  It has been commented out now...  --Ben
- *
- */
-int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
-		  struct packet_type *ptype, struct net_device *orig_dev)
-{
-	struct vlan_hdr *vhdr;
-	struct vlan_pcpu_stats *rx_stats;
-	struct net_device *vlan_dev;
-	u16 vlan_id;
-	u16 vlan_tci;
-
-	skb = skb_share_check(skb, GFP_ATOMIC);
-	if (skb == NULL)
-		goto err_free;
-
-	if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
-		goto err_free;
-
-	vhdr = (struct vlan_hdr *)skb->data;
-	vlan_tci = ntohs(vhdr->h_vlan_TCI);
-	vlan_id = vlan_tci & VLAN_VID_MASK;
-
-	rcu_read_lock();
-	vlan_dev = vlan_find_dev(dev, vlan_id);
-
-	/* If the VLAN device is defined, we use it.
-	 * If not, and the VID is 0, it is a 802.1p packet (not
-	 * really a VLAN), so we will just netif_rx it later to the
-	 * original interface, but with the skb->proto set to the
-	 * wrapped proto: we do nothing here.
-	 */
-
-	if (!vlan_dev) {
-		if (vlan_id) {
-			pr_debug("%s: ERROR: No net_device for VID: %u on dev: %s\n",
-				 __func__, vlan_id, dev->name);
-			goto err_unlock;
-		}
-		rx_stats = NULL;
-	} else {
-		skb->dev = vlan_dev;
-
-		rx_stats = this_cpu_ptr(vlan_dev_info(skb->dev)->vlan_pcpu_stats);
-
-		u64_stats_update_begin(&rx_stats->syncp);
-		rx_stats->rx_packets++;
-		rx_stats->rx_bytes += skb->len;
-
-		skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tci);
-
-		pr_debug("%s: priority: %u for TCI: %hu\n",
-			 __func__, skb->priority, vlan_tci);
-
-		switch (skb->pkt_type) {
-		case PACKET_BROADCAST:
-			/* Yeah, stats collect these together.. */
-			/* stats->broadcast ++; // no such counter :-( */
-			break;
-
-		case PACKET_MULTICAST:
-			rx_stats->rx_multicast++;
-			break;
-
-		case PACKET_OTHERHOST:
-			/* Our lower layer thinks this is not local, let's make
-			 * sure.
-			 * This allows the VLAN to have a different MAC than the
-			 * underlying device, and still route correctly.
-			 */
-			if (!compare_ether_addr(eth_hdr(skb)->h_dest,
-						skb->dev->dev_addr))
-				skb->pkt_type = PACKET_HOST;
-			break;
-		default:
-			break;
-		}
-		u64_stats_update_end(&rx_stats->syncp);
-	}
-
-	skb_pull_rcsum(skb, VLAN_HLEN);
-	vlan_set_encap_proto(skb, vhdr);
-
-	if (vlan_dev) {
-		skb = vlan_check_reorder_header(skb);
-		if (!skb) {
-			rx_stats->rx_errors++;
-			goto err_unlock;
-		}
-	}
-
-	netif_rx(skb);
-
-	rcu_read_unlock();
-	return NET_RX_SUCCESS;
-
-err_unlock:
-	rcu_read_unlock();
-err_free:
-	atomic_long_inc(&dev->rx_dropped);
-	kfree_skb(skb);
-	return NET_RX_DROP;
-}
-
 static inline u16
 vlan_dev_get_egress_qos_mask(struct net_device *dev, struct sk_buff *skb)
 {
diff --git a/net/core/dev.c b/net/core/dev.c
index 95897ff3a76f..d1aebf7c6494 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3130,6 +3130,12 @@ another_round:
 
 	__this_cpu_inc(softnet_data.processed);
 
+	if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) {
+		skb = vlan_untag(skb);
+		if (unlikely(!skb))
+			goto out;
+	}
+
 #ifdef CONFIG_NET_CLS_ACT
 	if (skb->tc_verd & TC_NCLS) {
 		skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
@@ -3177,7 +3183,7 @@ ncls:
 			ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = NULL;
 		}
-		if (vlan_hwaccel_do_receive(&skb)) {
+		if (vlan_do_receive(&skb)) {
 			ret = __netif_receive_skb(skb);
 			goto out;
 		} else if (unlikely(!skb))
-- 
cgit v1.2.3-58-ga151


From 1aac62671686e6234c91b5f6fc4caaa850419d5d Mon Sep 17 00:00:00 2001
From: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Date: Tue, 12 Apr 2011 04:07:39 +0000
Subject: net: vlan_features comment clarification
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 09d262415769..cb8178ab3c52 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1035,7 +1035,7 @@ struct net_device {
 	u32			hw_features;
 	/* user-requested features */
 	u32			wanted_features;
-	/* VLAN feature mask */
+	/* mask of features inheritable by VLAN devices */
 	u32			vlan_features;
 
 	/* Net device feature bits; if you change something,
-- 
cgit v1.2.3-58-ga151


From 6139e75f4a413bdc8f366fc11e437347be8abc59 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 12 Apr 2011 19:27:51 -0700
Subject: net: Missing 'inline' in vlan-disabled vlan_untag()

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/if_vlan.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 998b29930b80..546d9d35fbd4 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -174,7 +174,7 @@ static inline bool vlan_do_receive(struct sk_buff **skb)
 	return false;
 }
 
-inline struct sk_buff *vlan_untag(struct sk_buff *skb)
+static inline struct sk_buff *vlan_untag(struct sk_buff *skb)
 {
 	return skb;
 }
-- 
cgit v1.2.3-58-ga151


From 91eb7c08c6cb3b8eeba1c61f5753c56dcb77f018 Mon Sep 17 00:00:00 2001
From: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Date: Wed, 13 Apr 2011 13:51:38 +0200
Subject: netfilter: ipset: SCTP, UDPLITE support added

SCTP and UDPLITE port support added to the hash:*port* set types.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 include/linux/netfilter/ipset/ip_set_getport.h |  2 ++
 net/netfilter/ipset/ip_set_getport.c           | 16 +++++++++++++++-
 net/netfilter/ipset/ip_set_hash_ipport.c       |  2 +-
 net/netfilter/ipset/ip_set_hash_ipportip.c     |  2 +-
 net/netfilter/ipset/ip_set_hash_ipportnet.c    |  2 +-
 net/netfilter/ipset/ip_set_hash_netport.c      |  2 +-
 6 files changed, 21 insertions(+), 5 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/netfilter/ipset/ip_set_getport.h b/include/linux/netfilter/ipset/ip_set_getport.h
index 5aebd170f899..90d09300e954 100644
--- a/include/linux/netfilter/ipset/ip_set_getport.h
+++ b/include/linux/netfilter/ipset/ip_set_getport.h
@@ -22,7 +22,9 @@ static inline bool ip_set_proto_with_ports(u8 proto)
 {
 	switch (proto) {
 	case IPPROTO_TCP:
+	case IPPROTO_SCTP:
 	case IPPROTO_UDP:
+	case IPPROTO_UDPLITE:
 		return true;
 	}
 	return false;
diff --git a/net/netfilter/ipset/ip_set_getport.c b/net/netfilter/ipset/ip_set_getport.c
index 8d5227212686..757143b2240a 100644
--- a/net/netfilter/ipset/ip_set_getport.c
+++ b/net/netfilter/ipset/ip_set_getport.c
@@ -11,6 +11,7 @@
 #include <linux/skbuff.h>
 #include <linux/icmp.h>
 #include <linux/icmpv6.h>
+#include <linux/sctp.h>
 #include <linux/netfilter_ipv6/ip6_tables.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
@@ -35,7 +36,20 @@ get_port(const struct sk_buff *skb, int protocol, unsigned int protooff,
 		*port = src ? th->source : th->dest;
 		break;
 	}
-	case IPPROTO_UDP: {
+	case IPPROTO_SCTP: {
+		sctp_sctphdr_t _sh;
+		const sctp_sctphdr_t *sh;
+
+		sh = skb_header_pointer(skb, protooff, sizeof(_sh), &_sh);
+		if (sh == NULL)
+			/* No choice either */
+			return false;
+
+		*port = src ? sh->source : sh->dest;
+		break;
+	}
+	case IPPROTO_UDP:
+	case IPPROTO_UDPLITE: {
 		struct udphdr _udph;
 		const struct udphdr *uh;
 
diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c
index b9214145d357..14281b6b8074 100644
--- a/net/netfilter/ipset/ip_set_hash_ipport.c
+++ b/net/netfilter/ipset/ip_set_hash_ipport.c
@@ -491,7 +491,7 @@ static struct ip_set_type hash_ipport_type __read_mostly = {
 	.features	= IPSET_TYPE_IP | IPSET_TYPE_PORT,
 	.dimension	= IPSET_DIM_TWO,
 	.family		= AF_UNSPEC,
-	.revision	= 0,
+	.revision	= 1,
 	.create		= hash_ipport_create,
 	.create_policy	= {
 		[IPSET_ATTR_HASHSIZE]	= { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c
index 4642872df6e1..401c8a2531db 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportip.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportip.c
@@ -509,7 +509,7 @@ static struct ip_set_type hash_ipportip_type __read_mostly = {
 	.features	= IPSET_TYPE_IP | IPSET_TYPE_PORT | IPSET_TYPE_IP2,
 	.dimension	= IPSET_DIM_THREE,
 	.family		= AF_UNSPEC,
-	.revision	= 0,
+	.revision	= 1,
 	.create		= hash_ipportip_create,
 	.create_policy	= {
 		[IPSET_ATTR_HASHSIZE]	= { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c
index 2cb84a54b7ad..4743e5402522 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c
@@ -574,7 +574,7 @@ static struct ip_set_type hash_ipportnet_type __read_mostly = {
 	.features	= IPSET_TYPE_IP | IPSET_TYPE_PORT | IPSET_TYPE_IP2,
 	.dimension	= IPSET_DIM_THREE,
 	.family		= AF_UNSPEC,
-	.revision	= 0,
+	.revision	= 1,
 	.create		= hash_ipportnet_create,
 	.create_policy	= {
 		[IPSET_ATTR_HASHSIZE]	= { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_netport.c b/net/netfilter/ipset/ip_set_hash_netport.c
index 8598676f2a05..d2a40362dd3a 100644
--- a/net/netfilter/ipset/ip_set_hash_netport.c
+++ b/net/netfilter/ipset/ip_set_hash_netport.c
@@ -526,7 +526,7 @@ static struct ip_set_type hash_netport_type __read_mostly = {
 	.features	= IPSET_TYPE_IP | IPSET_TYPE_PORT,
 	.dimension	= IPSET_DIM_TWO,
 	.family		= AF_UNSPEC,
-	.revision	= 0,
+	.revision	= 1,
 	.create		= hash_netport_create,
 	.create_policy	= {
 		[IPSET_ATTR_HASHSIZE]	= { .type = NLA_U32 },
-- 
cgit v1.2.3-58-ga151


From 8b5933c380fc66a6311739f9b36a812383f82141 Mon Sep 17 00:00:00 2001
From: amit salecha <amit.salecha@qlogic.com>
Date: Thu, 7 Apr 2011 01:58:42 +0000
Subject: net: ethtool support to configure number of channels

Ethtool support to configure RX, TX and other channels. combined field
in struct ethtool_channels to reflect set of channel (RX, TX or other).
Other channel can be link interrupts, SR-IOV coordination etc.

ETHTOOL_GCHANNELS will report max and current number of RX channels,
max and current number of TX channels, max and current number of other channel
or max and current number of combined channel.

Number of channel can be modify upto max number of channel through
ETHTOOL_SCHANNELS command.

Ben Hutchings:
o define 'combined' and 'other' types.  Most multiqueue drivers pair up RX and TX
  queues so that most channels combine RX and TX work.
o Please could you use a kernel-doc comment to describe the structure.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/ethtool.h | 36 ++++++++++++++++++++++++++++++++++++
 net/core/ethtool.c      | 35 +++++++++++++++++++++++++++++++++++
 2 files changed, 71 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 12cfbd0be2ee..ad22a68c2e5d 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -229,6 +229,34 @@ struct ethtool_ringparam {
 	__u32	tx_pending;
 };
 
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ *	support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+	__u32	cmd;
+	__u32	max_rx;
+	__u32	max_tx;
+	__u32	max_other;
+	__u32	max_combined;
+	__u32	rx_count;
+	__u32	tx_count;
+	__u32	other_count;
+	__u32	combined_count;
+};
+
 /* for configuring link flow control parameters */
 struct ethtool_pauseparam {
 	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
@@ -818,6 +846,9 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
  *	Returns a negative error code or zero.
  * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
  *	Returns a negative error code or zero.
+ * @get_channels: Get number of channels.
+ * @set_channels: Set number of channels.  Returns a negative error code or
+ *	zero.
  *
  * All operations are optional (i.e. the function pointer may be set
  * to %NULL) and callers must take this into account.  Callers must
@@ -891,6 +922,9 @@ struct ethtool_ops {
 				  struct ethtool_rxfh_indir *);
 	int	(*set_rxfh_indir)(struct net_device *,
 				  const struct ethtool_rxfh_indir *);
+	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
+	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
+
 };
 #endif /* __KERNEL__ */
 
@@ -959,6 +993,8 @@ struct ethtool_ops {
 
 #define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
 #define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 43ef09fedd6e..41dee2de13ad 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1446,6 +1446,35 @@ static int ethtool_set_ringparam(struct net_device *dev, void __user *useraddr)
 	return dev->ethtool_ops->set_ringparam(dev, &ringparam);
 }
 
+static noinline_for_stack int ethtool_get_channels(struct net_device *dev,
+						   void __user *useraddr)
+{
+	struct ethtool_channels channels = { .cmd = ETHTOOL_GCHANNELS };
+
+	if (!dev->ethtool_ops->get_channels)
+		return -EOPNOTSUPP;
+
+	dev->ethtool_ops->get_channels(dev, &channels);
+
+	if (copy_to_user(useraddr, &channels, sizeof(channels)))
+		return -EFAULT;
+	return 0;
+}
+
+static noinline_for_stack int ethtool_set_channels(struct net_device *dev,
+						   void __user *useraddr)
+{
+	struct ethtool_channels channels;
+
+	if (!dev->ethtool_ops->set_channels)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&channels, useraddr, sizeof(channels)))
+		return -EFAULT;
+
+	return dev->ethtool_ops->set_channels(dev, &channels);
+}
+
 static int ethtool_get_pauseparam(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_pauseparam pauseparam = { ETHTOOL_GPAUSEPARAM };
@@ -2007,6 +2036,12 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
 	case ETHTOOL_SGRO:
 		rc = ethtool_set_one_feature(dev, useraddr, ethcmd);
 		break;
+	case ETHTOOL_GCHANNELS:
+		rc = ethtool_get_channels(dev, useraddr);
+		break;
+	case ETHTOOL_SCHANNELS:
+		rc = ethtool_set_channels(dev, useraddr);
+		break;
 	default:
 		rc = -EOPNOTSUPP;
 	}
-- 
cgit v1.2.3-58-ga151


From 4d42d417be75d750b82798922b6e775915e11bce Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Wed, 13 Apr 2011 14:48:55 -0700
Subject: rndis_host: Poll status before control channel where necessary

Some RNDIS devices don't respond on the control channel until polled
on the status channel.  In particular, this was reported to be the
case for the 2Wire HomePortal 1000SW and for some Windows Mobile
devices.

This is roughly based on a patch by John Carr <john.carr@unrouted.co.uk>
which is currently applied by Mandriva.

Reported-by: Mark Glassberg <vzeeaxwl@myfairpoint.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/rndis_host.c   | 39 ++++++++++++++++++++++++++++++++-------
 include/linux/usb/rndis_host.h |  2 ++
 2 files changed, 34 insertions(+), 7 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 5994a25c56ac..6d6c1da68a36 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -104,8 +104,10 @@ static void rndis_msg_indicate(struct usbnet *dev, struct rndis_indicate *msg,
 int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
 {
 	struct cdc_state	*info = (void *) &dev->data;
+	struct usb_cdc_notification notification;
 	int			master_ifnum;
 	int			retval;
+	int			partial;
 	unsigned		count;
 	__le32			rsp;
 	u32			xid = 0, msg_len, request_id;
@@ -133,13 +135,20 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
 	if (unlikely(retval < 0 || xid == 0))
 		return retval;
 
-	// FIXME Seems like some devices discard responses when
-	// we time out and cancel our "get response" requests...
-	// so, this is fragile.  Probably need to poll for status.
+	/* Some devices don't respond on the control channel until
+	 * polled on the status channel, so do that first. */
+	if (dev->driver_info->data & RNDIS_DRIVER_DATA_POLL_STATUS) {
+		retval = usb_interrupt_msg(
+			dev->udev,
+			usb_rcvintpipe(dev->udev,
+				       dev->status->desc.bEndpointAddress),
+			&notification, sizeof(notification), &partial,
+			RNDIS_CONTROL_TIMEOUT_MS);
+		if (unlikely(retval < 0))
+			return retval;
+	}
 
-	/* ignore status endpoint, just poll the control channel;
-	 * the request probably completed immediately
-	 */
+	/* Poll the control channel; the request probably completed immediately */
 	rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
 	for (count = 0; count < 10; count++) {
 		memset(buf, 0, CONTROL_BUFFER_SIZE);
@@ -581,17 +590,33 @@ static const struct driver_info	rndis_info = {
 	.tx_fixup =	rndis_tx_fixup,
 };
 
+static const struct driver_info	rndis_poll_status_info = {
+	.description =	"RNDIS device (poll status before control)",
+	.flags =	FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+	.data =		RNDIS_DRIVER_DATA_POLL_STATUS,
+	.bind =		rndis_bind,
+	.unbind =	rndis_unbind,
+	.status =	rndis_status,
+	.rx_fixup =	rndis_rx_fixup,
+	.tx_fixup =	rndis_tx_fixup,
+};
+
 /*-------------------------------------------------------------------------*/
 
 static const struct usb_device_id	products [] = {
 {
+	/* 2Wire HomePortal 1000SW */
+	USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0042,
+				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+	.driver_info = (unsigned long) &rndis_poll_status_info,
+}, {
 	/* RNDIS is MSFT's un-official variant of CDC ACM */
 	USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
 	.driver_info = (unsigned long) &rndis_info,
 }, {
 	/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
 	USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
-	.driver_info = (unsigned long) &rndis_info,
+	.driver_info = (unsigned long) &rndis_poll_status_info,
 }, {
 	/* RNDIS for tethering */
 	USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 05ef52861988..88fceb718c77 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -256,6 +256,8 @@ struct rndis_keepalive_c {	/* IN (optionally OUT) */
 #define FLAG_RNDIS_PHYM_NOT_WIRELESS	0x0001
 #define FLAG_RNDIS_PHYM_WIRELESS	0x0002
 
+/* Flags for driver_info::data */
+#define RNDIS_DRIVER_DATA_POLL_STATUS	1	/* poll status before control */
 
 extern void rndis_status(struct usbnet *dev, struct urb *urb);
 extern int
-- 
cgit v1.2.3-58-ga151


From c326de88b8ac7ed1cd1027017ba6079dbe91be49 Mon Sep 17 00:00:00 2001
From: "Mathieu J. Poirier" <mathieu.poirier@linaro.org>
Date: Wed, 13 Apr 2011 17:13:00 -0700
Subject: net: allow shifted access in smsc911x V2

This is a revised patch that permits a shifted access to the
LAN9221 registers.  More specifically:

 It adds a shift parameter in the platform_data.
 It introduces an ops in smsc911x_data.
 A choice of access function to use at run-time.
 Four new shifted access function.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smsc911x.c   | 156 ++++++++++++++++++++++++++++++++++++++++++++---
 include/linux/smsc911x.h |   1 +
 2 files changed, 150 insertions(+), 7 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b8faab7780da..c6d47d10590c 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -71,6 +71,17 @@ static int debug = 3;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
+struct smsc911x_data;
+
+struct smsc911x_ops {
+	u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg);
+	void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val);
+	void (*rx_readfifo)(struct smsc911x_data *pdata,
+				unsigned int *buf, unsigned int wordcount);
+	void (*tx_writefifo)(struct smsc911x_data *pdata,
+				unsigned int *buf, unsigned int wordcount);
+};
+
 struct smsc911x_data {
 	void __iomem *ioaddr;
 
@@ -118,8 +129,14 @@ struct smsc911x_data {
 	unsigned int clear_bits_mask;
 	unsigned int hashhi;
 	unsigned int hashlo;
+
+	/* register access functions */
+	const struct smsc911x_ops *ops;
 };
 
+/* Easy access to information */
+#define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift))
+
 static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 {
 	if (pdata->config.flags & SMSC911X_USE_32BIT)
@@ -133,13 +150,29 @@ static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 	return 0;
 }
 
+static inline u32
+__smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg)
+{
+	if (pdata->config.flags & SMSC911X_USE_32BIT)
+		return readl(pdata->ioaddr + __smsc_shift(pdata, reg));
+
+	if (pdata->config.flags & SMSC911X_USE_16BIT)
+		return (readw(pdata->ioaddr +
+				__smsc_shift(pdata, reg)) & 0xFFFF) |
+			((readw(pdata->ioaddr +
+			__smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16);
+
+	BUG();
+	return 0;
+}
+
 static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 {
 	u32 data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&pdata->dev_lock, flags);
-	data = __smsc911x_reg_read(pdata, reg);
+	data = pdata->ops->reg_read(pdata, reg);
 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 
 	return data;
@@ -162,13 +195,32 @@ static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
 	BUG();
 }
 
+static inline void
+__smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val)
+{
+	if (pdata->config.flags & SMSC911X_USE_32BIT) {
+		writel(val, pdata->ioaddr + __smsc_shift(pdata, reg));
+		return;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_16BIT) {
+		writew(val & 0xFFFF,
+			pdata->ioaddr + __smsc_shift(pdata, reg));
+		writew((val >> 16) & 0xFFFF,
+			pdata->ioaddr + __smsc_shift(pdata, reg + 2));
+		return;
+	}
+
+	BUG();
+}
+
 static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
 				      u32 val)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&pdata->dev_lock, flags);
-	__smsc911x_reg_write(pdata, reg, val);
+	pdata->ops->reg_write(pdata, reg, val);
 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 }
 
@@ -204,6 +256,40 @@ out:
 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 }
 
+/* Writes a packet to the TX_DATA_FIFO - shifted version */
+static inline void
+smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
+		      unsigned int wordcount)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->dev_lock, flags);
+
+	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+		while (wordcount--)
+			__smsc911x_reg_write_shift(pdata, TX_DATA_FIFO,
+					     swab32(*buf++));
+		goto out;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_32BIT) {
+		writesl(pdata->ioaddr + __smsc_shift(pdata,
+						TX_DATA_FIFO), buf, wordcount);
+		goto out;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_16BIT) {
+		while (wordcount--)
+			__smsc911x_reg_write_shift(pdata,
+						 TX_DATA_FIFO, *buf++);
+		goto out;
+	}
+
+	BUG();
+out:
+	spin_unlock_irqrestore(&pdata->dev_lock, flags);
+}
+
 /* Reads a packet out of the RX_DATA_FIFO */
 static inline void
 smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
@@ -236,6 +322,40 @@ out:
 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 }
 
+/* Reads a packet out of the RX_DATA_FIFO - shifted version */
+static inline void
+smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
+		     unsigned int wordcount)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->dev_lock, flags);
+
+	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+		while (wordcount--)
+			*buf++ = swab32(__smsc911x_reg_read_shift(pdata,
+							    RX_DATA_FIFO));
+		goto out;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_32BIT) {
+		readsl(pdata->ioaddr + __smsc_shift(pdata,
+						RX_DATA_FIFO), buf, wordcount);
+		goto out;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_16BIT) {
+		while (wordcount--)
+			*buf++ = __smsc911x_reg_read_shift(pdata,
+								RX_DATA_FIFO);
+		goto out;
+	}
+
+	BUG();
+out:
+	spin_unlock_irqrestore(&pdata->dev_lock, flags);
+}
+
 /* waits for MAC not busy, with timeout.  Only called by smsc911x_mac_read
  * and smsc911x_mac_write, so assumes mac_lock is held */
 static int smsc911x_mac_complete(struct smsc911x_data *pdata)
@@ -500,7 +620,7 @@ static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
 		wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3);
 		wrsz >>= 2;
 
-		smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
+		pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
 
 		/* Wait till transmit is done */
 		i = 60;
@@ -544,7 +664,7 @@ static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
 		rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3);
 		rdsz >>= 2;
 
-		smsc911x_rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
+		pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
 
 		if (pktlength != (MIN_PACKET_SIZE + 4)) {
 			SMSC_WARN(pdata, hw, "Unexpected packet size "
@@ -1046,8 +1166,8 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
 		/* Align IP on 16B boundary */
 		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, pktlength - 4);
-		smsc911x_rx_readfifo(pdata, (unsigned int *)skb->head,
-				     pktwords);
+		pdata->ops->rx_readfifo(pdata,
+				 (unsigned int *)skb->head, pktwords);
 		skb->protocol = eth_type_trans(skb, dev);
 		skb_checksum_none_assert(skb);
 		netif_receive_skb(skb);
@@ -1351,7 +1471,7 @@ static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	wrsz += (u32)((ulong)skb->data & 0x3);
 	wrsz >>= 2;
 
-	smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
+	pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
 	freespace -= (skb->len + 32);
 	dev_kfree_skb(skb);
 
@@ -1957,6 +2077,22 @@ static int __devexit smsc911x_drv_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* standard register acces */
+static const struct smsc911x_ops standard_smsc911x_ops = {
+	.reg_read = __smsc911x_reg_read,
+	.reg_write = __smsc911x_reg_write,
+	.rx_readfifo = smsc911x_rx_readfifo,
+	.tx_writefifo = smsc911x_tx_writefifo,
+};
+
+/* shifted register access */
+static const struct smsc911x_ops shifted_smsc911x_ops = {
+	.reg_read = __smsc911x_reg_read_shift,
+	.reg_write = __smsc911x_reg_write_shift,
+	.rx_readfifo = smsc911x_rx_readfifo_shift,
+	.tx_writefifo = smsc911x_tx_writefifo_shift,
+};
+
 static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
@@ -2026,6 +2162,12 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 		goto out_free_netdev_2;
 	}
 
+	/* assume standard, non-shifted, access to HW registers */
+	pdata->ops = &standard_smsc911x_ops;
+	/* apply the right access if shifting is needed */
+	if (config->shift)
+		pdata->ops = &shifted_smsc911x_ops;
+
 	retval = smsc911x_init(dev);
 	if (retval < 0)
 		goto out_unmap_io_3;
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index 7144e8aa1e41..4dde70e74822 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -29,6 +29,7 @@ struct smsc911x_platform_config {
 	unsigned int irq_polarity;
 	unsigned int irq_type;
 	unsigned int flags;
+	unsigned int shift;
 	phy_interface_t phy_interface;
 	unsigned char mac[6];
 };
-- 
cgit v1.2.3-58-ga151


From fce55922f5299a04c0a56b170a141fab34f13465 Mon Sep 17 00:00:00 2001
From: "Allan, Bruce W" <bruce.w.allan@intel.com>
Date: Wed, 13 Apr 2011 13:09:10 +0000
Subject: ethtool: allow custom interval for physical identification

When physical identification of an adapter is done by toggling the
mechanism on and off through software utilizing the set_phys_id operation,
it is done with a fixed duration for both on and off states.  Some drivers
may want to set a custom duration for the on/off intervals.  This patch
changes the API so the return code from the driver's entry point when it
is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to
cycle the on/off states, and updates the drivers that have already been
converted to use the new set_phys_id and use the synchronous method for
identifying an adapter.

The physical identification frequency set in the updated drivers is based
on how it was done prior to the introduction of set_phys_id.

Compile tested only.  Also fixes a compiler warning in sfc.

v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE
v3: fold patchset into single patch and cleanup per Ben's feedback

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Divy Le Ray <divy@chelsio.com>
Cc: Don Fry <pcnet32@frontier.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Steve Hodgson <shodgson@solarflare.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_ethtool.c    |  2 +-
 drivers/net/bnx2.c                |  2 +-
 drivers/net/bnx2x/bnx2x_ethtool.c |  2 +-
 drivers/net/cxgb3/cxgb3_main.c    |  2 +-
 drivers/net/ewrk3.c               |  2 +-
 drivers/net/niu.c                 |  2 +-
 drivers/net/pcnet32.c             |  2 +-
 drivers/net/s2io.c                |  2 +-
 drivers/net/sfc/ethtool.c         |  6 +++---
 drivers/net/skge.c                |  2 +-
 drivers/net/sky2.c                |  2 +-
 drivers/net/tg3.c                 |  2 +-
 include/linux/ethtool.h           |  6 ++++--
 net/core/ethtool.c                | 31 ++++++++++++++++---------------
 14 files changed, 34 insertions(+), 31 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 96f5502e0ef7..80226e4801f3 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -516,7 +516,7 @@ be_set_phys_id(struct net_device *netdev,
 	case ETHTOOL_ID_ACTIVE:
 		be_cmd_get_beacon_state(adapter, adapter->hba_port_num,
 					&adapter->beacon_state);
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 0a52079bafef..bf729ee6acbd 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7473,7 +7473,7 @@ bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state)
 
 		bp->leds_save = REG_RD(bp, BNX2_MISC_CFG);
 		REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index ad7d91e499f4..0a5e88d6ba2c 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -2025,7 +2025,7 @@ static int bnx2x_set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		bnx2x_set_led(&bp->link_params, &bp->link_vars,
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 802c7a7c3b25..a087e0691dce 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1757,7 +1757,7 @@ static int set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_OFF:
 		t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, 0);
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index c7ce4438e923..17b6027d8be8 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -1618,7 +1618,7 @@ static int ewrk3_set_phys_id(struct net_device *dev,
 		/* Prevent ISR from twiddling the LED */
 		lp->led_mask = 0;
 		spin_unlock_irq(&lp->hw_lock);
-		return -EINVAL;
+		return 2;	/* cycle on/off twice per second */
 
 	case ETHTOOL_ID_ON:
 		cr = inb(EWRK3_CR);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 3fa1e9cdb4a8..ea2272f0f37e 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -7896,7 +7896,7 @@ static int niu_set_phys_id(struct net_device *dev,
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
 		np->orig_led_state = niu_led_state_save(np);
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		niu_force_led(np, 1);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index e89afb929740..0a1efbae1bc0 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1038,7 +1038,7 @@ static int pcnet32_set_phys_id(struct net_device *dev,
 		for (i = 4; i < 8; i++)
 			lp->save_regs[i - 4] = a->read_bcr(ioaddr, i);
 		spin_unlock_irqrestore(&lp->lock, flags);
-		return -EINVAL;
+		return 2;	/* cycle on/off twice per second */
 
 	case ETHTOOL_ID_ON:
 	case ETHTOOL_ID_OFF:
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 2d5cc6142c04..2302d9743744 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -5541,7 +5541,7 @@ static int s2io_ethtool_set_led(struct net_device *dev,
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
 		sp->adapt_ctrl_org = readq(&bar0->gpio_control);
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		s2io_set_led(sp, true);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 644f7c1d6e7b..5d8468fc5804 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -182,7 +182,7 @@ static int efx_ethtool_phys_id(struct net_device *net_dev,
 			       enum ethtool_phys_id_state state)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	enum efx_led_mode mode;
+	enum efx_led_mode mode = EFX_LED_DEFAULT;
 
 	switch (state) {
 	case ETHTOOL_ID_ON:
@@ -194,8 +194,8 @@ static int efx_ethtool_phys_id(struct net_device *net_dev,
 	case ETHTOOL_ID_INACTIVE:
 		mode = EFX_LED_DEFAULT;
 		break;
-	default:
-		return -EINVAL;
+	case ETHTOOL_ID_ACTIVE:
+		return 1;	/* cycle on/off once per second */
 	}
 
 	efx->type->set_id_led(efx, mode);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 310dcbce2519..176d784cbb54 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -753,7 +753,7 @@ static int skge_set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 2;	/* cycle on/off twice per second */
 
 	case ETHTOOL_ID_ON:
 		skge_led(skge, LED_MODE_TST);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a4b8fe564eb0..c8d045114c66 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3813,7 +3813,7 @@ static int sky2_set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 	case ETHTOOL_ID_INACTIVE:
 		sky2_led(sky2, MO_LED_NORM);
 		break;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 10fa476fede3..9915734ac3e9 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10384,7 +10384,7 @@ static int tg3_set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index ad22a68c2e5d..9de31274341d 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -798,8 +798,10 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
  *	attached to it.  The implementation may update the indicator
  *	asynchronously or synchronously, but in either case it must return
  *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
- *	and must either activate asynchronous updates or return -%EINVAL.
- *	If it returns -%EINVAL then it will be called again at intervals with
+ *	and must either activate asynchronous updates and return zero, return
+ *	a negative error or return a positive frequency for synchronous
+ *	indication (e.g. 1 for one on/off cycle per second).  If it returns
+ *	a frequency then it will be called again at intervals with the
  *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
  *	the indicator accordingly.  Finally, it is called with the argument
  *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 41dee2de13ad..13d79f5a86e5 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1669,7 +1669,7 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 		return dev->ethtool_ops->phys_id(dev, id.data);
 
 	rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE);
-	if (rc && rc != -EINVAL)
+	if (rc < 0)
 		return rc;
 
 	/* Drop the RTNL lock while waiting, but prevent reentry or
@@ -1684,21 +1684,22 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 		schedule_timeout_interruptible(
 			id.data ? (id.data * HZ) : MAX_SCHEDULE_TIMEOUT);
 	} else {
-		/* Driver expects to be called periodically */
+		/* Driver expects to be called at twice the frequency in rc */
+		int n = rc * 2, i, interval = HZ / n;
+
+		/* Count down seconds */
 		do {
-			rtnl_lock();
-			rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ON);
-			rtnl_unlock();
-			if (rc)
-				break;
-			schedule_timeout_interruptible(HZ / 2);
-
-			rtnl_lock();
-			rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_OFF);
-			rtnl_unlock();
-			if (rc)
-				break;
-			schedule_timeout_interruptible(HZ / 2);
+			/* Count down iterations per second */
+			i = n;
+			do {
+				rtnl_lock();
+				rc = dev->ethtool_ops->set_phys_id(dev,
+				    (i & 1) ? ETHTOOL_ID_OFF : ETHTOOL_ID_ON);
+				rtnl_unlock();
+				if (rc)
+					break;
+				schedule_timeout_interruptible(interval);
+			} while (!signal_pending(current) && --i != 0);
 		} while (!signal_pending(current) &&
 			 (id.data == 0 || --id.data != 0));
 	}
-- 
cgit v1.2.3-58-ga151


From 62c7d085e1f2a1f2b4d89560551eff18d703b3b1 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 10 Mar 2011 16:42:47 +0200
Subject: wl12xx: add new board_tcxo_clock element to the platform data

This new value is a new type of clock setting that is used by wl128x
chipsets.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 include/linux/wl12xx.h | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index bebb8efea0a6..eb8aacab8d4e 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -24,7 +24,7 @@
 #ifndef _LINUX_WL12XX_H
 #define _LINUX_WL12XX_H
 
-/* The board reference clock values */
+/* Reference clock values */
 enum {
 	WL12XX_REFCLOCK_19 = 0,	/* 19.2 MHz */
 	WL12XX_REFCLOCK_26 = 1,	/* 26 MHz */
@@ -32,12 +32,25 @@ enum {
 	WL12XX_REFCLOCK_54 = 3,	/* 54 MHz */
 };
 
+/* TCXO clock values */
+enum {
+	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
+	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
+	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
+	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
+	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
+	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
+};
+
 struct wl12xx_platform_data {
 	void (*set_power)(bool enable);
 	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
 	int irq;
 	bool use_eeprom;
 	int board_ref_clock;
+	int board_tcxo_clock;
 };
 
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
-- 
cgit v1.2.3-58-ga151


From d29633b40e6afc6b4276a4e381bc532cc84be104 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 31 Mar 2011 10:06:57 +0200
Subject: wl12xx: Clean up and fix the 128x boot sequence

Clean up the boot sequence code & fix the following issues:
1. Always read the registers' values and set the relevant bits instead of
   zeroing all other bits
2. Handle cases where wl1271_top_reg_read returns an error
3. Verify that the HW can detect the selected clock source
4. Remove 128x PG10 initialization code
5. Configure the MCS PLL to work in HP mode

Signed-off-by: Ido Yariv <ido@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c | 235 ++++++++++++++++++-------------------
 drivers/net/wireless/wl12xx/boot.h |   1 +
 include/linux/wl12xx.h             |  10 +-
 3 files changed, 123 insertions(+), 123 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 34bf2fe47dc7..b5ec2c2b6f78 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -523,137 +523,137 @@ static void wl1271_boot_hw_version(struct wl1271 *wl)
 		wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
 }
 
-/*
- * WL128x has two clocks input - TCXO and FREF.
- * TCXO is the main clock of the device, while FREF is used to sync
- * between the GPS and the cellular modem.
- * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
- * as the WLAN/BT main clock.
- */
-static int wl128x_switch_fref(struct wl1271 *wl, bool *is_ref_clk)
+static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
 {
-	u16 sys_clk_cfg_val;
+	u16 spare_reg;
 
-	/* if working on XTAL-only mode go directly to TCXO TO FREF SWITCH */
-	if ((wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL) ||
-	    (wl->ref_clock == CONF_REF_CLK_26_M_XTAL))
-		return true;
+	/* Mask bits [2] & [8:4] in the sys_clk_cfg register */
+	spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
+	if (spare_reg == 0xFFFF)
+		return -EFAULT;
+	spare_reg |= (BIT(3) | BIT(5) | BIT(6));
+	wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
 
-	/* Read clock source FREF or TCXO */
-	sys_clk_cfg_val = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
+	/* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
+	wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
+			     WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
 
-	if (sys_clk_cfg_val & PRCM_CM_EN_MUX_WLAN_FREF) {
-		/* if bit 3 is set - working with FREF clock */
-		wl1271_debug(DEBUG_BOOT, "working with FREF clock, skip"
-			     " to FREF");
+	/* Delay execution for 15msec, to let the HW settle */
+	mdelay(15);
 
-		*is_ref_clk = true;
-	} else {
-		/* if bit 3 is clear - working with TCXO clock */
-		wl1271_debug(DEBUG_BOOT, "working with TCXO clock");
-
-		/* TCXO to FREF switch, check TXCO clock config */
-		if ((wl->tcxo_clock != WL12XX_TCXOCLOCK_16_368) &&
-		    (wl->tcxo_clock != WL12XX_TCXOCLOCK_32_736)) {
-			/*
-			 * not 16.368Mhz and not 32.736Mhz - skip to
-			 * configure ELP stage
-			 */
-			wl1271_debug(DEBUG_BOOT, "NEW PLL ALGO:"
-				     " TcxoRefClk=%d - not 16.368Mhz and not"
-				     " 32.736Mhz - skip to configure ELP"
-				     " stage", wl->tcxo_clock);
-
-			*is_ref_clk = false;
-		} else {
-			wl1271_debug(DEBUG_BOOT, "NEW PLL ALGO:"
-				     "TcxoRefClk=%d - 16.368Mhz or 32.736Mhz"
-				     " - TCXO to FREF switch",
-				     wl->tcxo_clock);
+	return 0;
+}
 
-			return true;
-		}
-	}
+static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
+{
+	u16 tcxo_detection;
+
+	tcxo_detection = wl1271_top_reg_read(wl, TCXO_CLK_DETECT_REG);
+	if (tcxo_detection & TCXO_DET_FAILED)
+		return false;
 
-	return false;
+	return true;
 }
 
-static int wl128x_boot_clk(struct wl1271 *wl, bool *is_ref_clk)
+static bool wl128x_is_fref_valid(struct wl1271 *wl)
 {
-	if (wl128x_switch_fref(wl, is_ref_clk)) {
-		wl1271_debug(DEBUG_BOOT, "XTAL-only mode go directly to"
-					 " TCXO TO FREF SWITCH");
-		/* TCXO to FREF switch - for PG2.0 */
-		wl1271_top_reg_write(wl, WL_SPARE_REG,
-				     WL_SPARE_MASK_8526);
-
-		wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
-			WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
-
-		*is_ref_clk = true;
-		mdelay(15);
-	}
+	u16 fref_detection;
 
-	/* Set bit 2 in spare register to avoid illegal access */
-	wl1271_top_reg_write(wl, WL_SPARE_REG, WL_SPARE_VAL);
+	fref_detection = wl1271_top_reg_read(wl, FREF_CLK_DETECT_REG);
+	if (fref_detection & FREF_CLK_DETECT_FAIL)
+		return false;
 
-	/* working with TCXO clock */
-	if ((*is_ref_clk == false) &&
-	    ((wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8) ||
-	     (wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6))) {
-		wl1271_debug(DEBUG_BOOT, "16_8_M or 33_6_M TCXO detected");
+	return true;
+}
 
-		/* Manually Configure MCS PLL settings PG2.0 Only */
-		wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
-		wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
-		wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG,
-				     MCS_PLL_CONFIG_REG_VAL);
-	} else {
-		int pll_config;
-		u16 mcs_pll_config_val;
+static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
+{
+	wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
+	wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
+	wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
 
-		/*
-		 * Configure MCS PLL settings to FREF Freq
-		 * Set the values that determine the time elapse since the PLL's
-		 * get their enable signal until the lock indication is set
-		 */
-		wl1271_top_reg_write(wl, PLL_LOCK_COUNTERS_REG,
-			PLL_LOCK_COUNTERS_COEX | PLL_LOCK_COUNTERS_MCS);
+	return 0;
+}
 
-		mcs_pll_config_val = wl1271_top_reg_read(wl,
-						 MCS_PLL_CONFIG_REG);
-		/*
-		 * Set the MCS PLL input frequency value according to the
-		 * reference clock value detected/read
-		 */
-		if (*is_ref_clk == false) {
-			if ((wl->tcxo_clock == WL12XX_TCXOCLOCK_19_2) ||
-			    (wl->tcxo_clock == WL12XX_TCXOCLOCK_38_4))
-				pll_config = 1;
-			else if ((wl->tcxo_clock == WL12XX_TCXOCLOCK_26)
-				 ||
-				 (wl->tcxo_clock == WL12XX_TCXOCLOCK_52))
-				pll_config = 2;
-			else
-				return -EINVAL;
-		} else {
-			if ((wl->ref_clock == CONF_REF_CLK_19_2_E) ||
-			    (wl->ref_clock == CONF_REF_CLK_38_4_E))
-				pll_config = 1;
-			else if ((wl->ref_clock == CONF_REF_CLK_26_E) ||
-				 (wl->ref_clock == CONF_REF_CLK_52_E))
-				pll_config = 2;
-			else
-				return -EINVAL;
-		}
+static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
+{
+	u16 spare_reg;
+	u16 pll_config;
+	u8 input_freq;
+
+	/* Mask bits [3:1] in the sys_clk_cfg register */
+	spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
+	if (spare_reg == 0xFFFF)
+		return -EFAULT;
+	spare_reg |= BIT(2);
+	wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+
+	/* Handle special cases of the TCXO clock */
+	if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
+	    wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
+		return wl128x_manually_configure_mcs_pll(wl);
+
+	/* Set the input frequency according to the selected clock source */
+	input_freq = (clk & 1) + 1;
+
+	pll_config = wl1271_top_reg_read(wl, MCS_PLL_CONFIG_REG);
+	if (pll_config == 0xFFFF)
+		return -EFAULT;
+	pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
+	pll_config |= MCS_PLL_ENABLE_HP;
+	wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
 
-		mcs_pll_config_val |= (pll_config << (MCS_SEL_IN_FREQ_SHIFT)) &
-				      (MCS_SEL_IN_FREQ_MASK);
-		wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG,
-				     mcs_pll_config_val);
+	return 0;
+}
+
+/*
+ * WL128x has two clocks input - TCXO and FREF.
+ * TCXO is the main clock of the device, while FREF is used to sync
+ * between the GPS and the cellular modem.
+ * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
+ * as the WLAN/BT main clock.
+ */
+static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
+{
+	u16 sys_clk_cfg;
+
+	/* For XTAL-only modes, FREF will be used after switching from TCXO */
+	if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
+	    wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
+		if (!wl128x_switch_tcxo_to_fref(wl))
+			return -EINVAL;
+		goto fref_clk;
 	}
 
-	return 0;
+	/* Query the HW, to determine which clock source we should use */
+	sys_clk_cfg = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
+	if (sys_clk_cfg == 0xFFFF)
+		return -EINVAL;
+	if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
+		goto fref_clk;
+
+	/* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
+	if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
+	    wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
+		if (!wl128x_switch_tcxo_to_fref(wl))
+			return -EINVAL;
+		goto fref_clk;
+	}
+
+	/* TCXO clock is selected */
+	if (!wl128x_is_tcxo_valid(wl))
+		return -EINVAL;
+	*selected_clock = wl->tcxo_clock;
+	goto config_mcs_pll;
+
+fref_clk:
+	/* FREF clock is selected */
+	if (!wl128x_is_fref_valid(wl))
+		return -EINVAL;
+	*selected_clock = wl->ref_clock;
+
+config_mcs_pll:
+	return wl128x_configure_mcs_pll(wl, *selected_clock);
 }
 
 static int wl127x_boot_clk(struct wl1271 *wl)
@@ -713,10 +713,10 @@ int wl1271_load_firmware(struct wl1271 *wl)
 {
 	int ret = 0;
 	u32 tmp, clk;
-	bool is_ref_clk = false;
+	int selected_clock = -1;
 
 	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		ret = wl128x_boot_clk(wl, &is_ref_clk);
+		ret = wl128x_boot_clk(wl, &selected_clock);
 		if (ret < 0)
 			goto out;
 	} else {
@@ -741,10 +741,7 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
 	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		if (is_ref_clk == false)
-			clk |= ((wl->tcxo_clock & 0x3) << 1) << 4;
-		else
-			clk |= ((wl->ref_clock & 0x3) << 1) << 4;
+		clk |= ((selected_clock & 0x3) << 1) << 4;
 	} else {
 		clk |= (wl->ref_clock << 1) << 4;
 	}
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
index 1f5ee31dc0b1..d9de64ac1442 100644
--- a/drivers/net/wireless/wl12xx/boot.h
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -107,6 +107,7 @@ struct wl1271_static_data {
 #define MCS_SEL_IN_FREQ_MASK         0x0070
 #define MCS_SEL_IN_FREQ_SHIFT        4
 #define MCS_PLL_CONFIG_REG_VAL       0x73
+#define MCS_PLL_ENABLE_HP            (BIT(0) | BIT(1))
 
 #define MCS_PLL_M_REG                0xD94
 #define MCS_PLL_N_REG                0xD96
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index eb8aacab8d4e..c1a743ea7470 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -26,10 +26,12 @@
 
 /* Reference clock values */
 enum {
-	WL12XX_REFCLOCK_19 = 0,	/* 19.2 MHz */
-	WL12XX_REFCLOCK_26 = 1,	/* 26 MHz */
-	WL12XX_REFCLOCK_38 = 2,	/* 38.4 MHz */
-	WL12XX_REFCLOCK_54 = 3,	/* 54 MHz */
+	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
+	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
+	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
 };
 
 /* TCXO clock values */
-- 
cgit v1.2.3-58-ga151


From 341b7cde6ccc60672fcd7fc84dd24a1b7c0b8d94 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 31 Mar 2011 10:07:01 +0200
Subject: wl12xx: Handle platforms without level trigger interrupts

Some platforms are incapable of triggering on level interrupts. Add a
platform quirks member in the platform data structure, as well as an
edge interrupt quirk which can be set on such platforms.

When the interrupt is requested with IRQF_TRIGGER_RISING, IRQF_ONESHOT
cannot be used, as we might miss interrupts that occur after the FW
status is cleared and before the threaded interrupt handler exits.

Moreover, when IRQF_ONESHOT is not set, iterating more than once in the
threaded interrupt handler introduces a few race conditions between this
handler and the hardirq handler. Currently this is worked around by
limiting the loop to one iteration only. This workaround has an impact
on performance. To remove to this restriction, the race conditions will
need to be addressed.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 9 +++++++++
 drivers/net/wireless/wl12xx/sdio.c   | 9 ++++++++-
 drivers/net/wireless/wl12xx/spi.c    | 9 ++++++++-
 drivers/net/wireless/wl12xx/wl12xx.h | 3 +++
 include/linux/wl12xx.h               | 4 ++++
 5 files changed, 32 insertions(+), 2 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 1feb9551ef8f..7126506611c1 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -30,6 +30,7 @@
 #include <linux/vmalloc.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/wl12xx.h>
 
 #include "wl12xx.h"
 #include "wl12xx_80211.h"
@@ -719,6 +720,13 @@ irqreturn_t wl1271_irq(int irq, void *cookie)
 	set_bit(WL1271_FLAG_TX_PENDING, &wl->flags);
 	cancel_work_sync(&wl->tx_work);
 
+	/*
+	 * In case edge triggered interrupt must be used, we cannot iterate
+	 * more than once without introducing race conditions with the hardirq.
+	 */
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+		loopcount = 1;
+
 	mutex_lock(&wl->mutex);
 
 	wl1271_debug(DEBUG_IRQ, "IRQ work");
@@ -3648,6 +3656,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->ap_ps_map = 0;
 	wl->ap_fw_ps_map = 0;
 	wl->quirks = 0;
+	wl->platform_quirks = 0;
 
 	memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 8246e9de4306..bcd4ad7ba90d 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -220,6 +220,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	struct ieee80211_hw *hw;
 	const struct wl12xx_platform_data *wlan_data;
 	struct wl1271 *wl;
+	unsigned long irqflags;
 	int ret;
 
 	/* We are only able to handle the wlan function */
@@ -251,9 +252,15 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	wl->irq = wlan_data->irq;
 	wl->ref_clock = wlan_data->board_ref_clock;
 	wl->tcxo_clock = wlan_data->board_tcxo_clock;
+	wl->platform_quirks = wlan_data->platform_quirks;
+
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+		irqflags = IRQF_TRIGGER_RISING;
+	else
+		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
 
 	ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
-				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   irqflags,
 				   DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1271_error("request_irq() failed: %d", ret);
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
index 7b82b5f0e490..51662bb68019 100644
--- a/drivers/net/wireless/wl12xx/spi.c
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -364,6 +364,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	struct wl12xx_platform_data *pdata;
 	struct ieee80211_hw *hw;
 	struct wl1271 *wl;
+	unsigned long irqflags;
 	int ret;
 
 	pdata = spi->dev.platform_data;
@@ -402,6 +403,12 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 
 	wl->ref_clock = pdata->board_ref_clock;
 	wl->tcxo_clock = pdata->board_tcxo_clock;
+	wl->platform_quirks = pdata->platform_quirks;
+
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+		irqflags = IRQF_TRIGGER_RISING;
+	else
+		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
 
 	wl->irq = spi->irq;
 	if (wl->irq < 0) {
@@ -411,7 +418,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	}
 
 	ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
-				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   irqflags,
 				   DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1271_error("request_irq() failed: %d", ret);
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 9ccbcfdd0802..fb2b79fa42b4 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -579,6 +579,9 @@ struct wl1271 {
 
 	/* Quirks of specific hardware revisions */
 	unsigned int quirks;
+
+	/* Platform limitations */
+	unsigned int platform_quirks;
 };
 
 struct wl1271_station {
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index c1a743ea7470..4b697395326e 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -53,8 +53,12 @@ struct wl12xx_platform_data {
 	bool use_eeprom;
 	int board_ref_clock;
 	int board_tcxo_clock;
+	unsigned long platform_quirks;
 };
 
+/* Platform does not support level trigger interrupts */
+#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ	BIT(0)
+
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
 
 int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
-- 
cgit v1.2.3-58-ga151


From cbc6a6ed0900aed789b5ca77192845f2f987af70 Mon Sep 17 00:00:00 2001
From: Antonio Ospite <ospite@studenti.unina.it>
Date: Wed, 13 Apr 2011 21:40:45 +0200
Subject: rfkill: Regulator consumer driver for rfkill

Add a regulator consumer driver for rfkill to enable controlling radio
transmitters connected to voltage regulators using the regulator
framework.

A new "vrfkill" virtual supply is provided to use in platform code.

Signed-off-by: Guiming Zhuo <gmzhuo@gmail.com>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/rfkill-regulator.h |  48 ++++++++++++
 net/rfkill/Kconfig               |  11 +++
 net/rfkill/Makefile              |   1 +
 net/rfkill/rfkill-regulator.c    | 164 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 224 insertions(+)
 create mode 100644 include/linux/rfkill-regulator.h
 create mode 100644 net/rfkill/rfkill-regulator.c

(limited to 'include/linux')

diff --git a/include/linux/rfkill-regulator.h b/include/linux/rfkill-regulator.h
new file mode 100644
index 000000000000..aca36bc83315
--- /dev/null
+++ b/include/linux/rfkill-regulator.h
@@ -0,0 +1,48 @@
+/*
+ * rfkill-regulator.c - Regulator consumer driver for rfkill
+ *
+ * Copyright (C) 2009  Guiming Zhuo <gmzhuo@gmail.com>
+ * Copyright (C) 2011  Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_RFKILL_REGULATOR_H
+#define __LINUX_RFKILL_REGULATOR_H
+
+/*
+ * Use "vrfkill" as supply id when declaring the regulator consumer:
+ *
+ * static struct regulator_consumer_supply pcap_regulator_V6_consumers [] = {
+ * 	{ .dev_name = "rfkill-regulator.0", .supply = "vrfkill" },
+ * };
+ *
+ * If you have several regulator driven rfkill, you can append a numerical id to
+ * .dev_name as done above, and use the same id when declaring the platform
+ * device:
+ *
+ * static struct rfkill_regulator_platform_data ezx_rfkill_bt_data = {
+ * 	.name  = "ezx-bluetooth",
+ * 	.type  = RFKILL_TYPE_BLUETOOTH,
+ * };
+ *
+ * static struct platform_device a910_rfkill = {
+ * 	.name  = "rfkill-regulator",
+ * 	.id    = 0,
+ * 	.dev   = {
+ * 		.platform_data = &ezx_rfkill_bt_data,
+ * 	},
+ * };
+ */
+
+#include <linux/rfkill.h>
+
+struct rfkill_regulator_platform_data {
+	char *name;             /* the name for the rfkill switch */
+	enum rfkill_type type;  /* the type as specified in rfkill.h */
+};
+
+#endif /* __LINUX_RFKILL_REGULATOR_H */
diff --git a/net/rfkill/Kconfig b/net/rfkill/Kconfig
index 7fce6dfd2180..48464ca13b24 100644
--- a/net/rfkill/Kconfig
+++ b/net/rfkill/Kconfig
@@ -22,3 +22,14 @@ config RFKILL_INPUT
 	depends on RFKILL
 	depends on INPUT = y || RFKILL = INPUT
 	default y if !EXPERT
+
+config RFKILL_REGULATOR
+	tristate "Generic rfkill regulator driver"
+	depends on RFKILL || !RFKILL
+	depends on REGULATOR
+	help
+          This options enable controlling radio transmitters connected to
+          voltage regulator using the regulator framework.
+
+          To compile this driver as a module, choose M here: the module will
+          be called rfkill-regulator.
diff --git a/net/rfkill/Makefile b/net/rfkill/Makefile
index 662105352691..d9a5a58ffd8c 100644
--- a/net/rfkill/Makefile
+++ b/net/rfkill/Makefile
@@ -5,3 +5,4 @@
 rfkill-y			+= core.o
 rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
 obj-$(CONFIG_RFKILL)		+= rfkill.o
+obj-$(CONFIG_RFKILL_REGULATOR)	+= rfkill-regulator.o
diff --git a/net/rfkill/rfkill-regulator.c b/net/rfkill/rfkill-regulator.c
new file mode 100644
index 000000000000..18dc512a10f3
--- /dev/null
+++ b/net/rfkill/rfkill-regulator.c
@@ -0,0 +1,164 @@
+/*
+ * rfkill-regulator.c - Regulator consumer driver for rfkill
+ *
+ * Copyright (C) 2009  Guiming Zhuo <gmzhuo@gmail.com>
+ * Copyright (C) 2011  Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * Implementation inspired by leds-regulator driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/rfkill.h>
+#include <linux/rfkill-regulator.h>
+
+struct rfkill_regulator_data {
+	struct rfkill *rf_kill;
+	bool reg_enabled;
+
+	struct regulator *vcc;
+};
+
+static int rfkill_regulator_set_block(void *data, bool blocked)
+{
+	struct rfkill_regulator_data *rfkill_data = data;
+
+	pr_debug("%s: blocked: %d\n", __func__, blocked);
+
+	if (blocked) {
+		if (rfkill_data->reg_enabled) {
+			regulator_disable(rfkill_data->vcc);
+			rfkill_data->reg_enabled = 0;
+		}
+	} else {
+		if (!rfkill_data->reg_enabled) {
+			regulator_enable(rfkill_data->vcc);
+			rfkill_data->reg_enabled = 1;
+		}
+	}
+
+	pr_debug("%s: regulator_is_enabled after set_block: %d\n", __func__,
+		regulator_is_enabled(rfkill_data->vcc));
+
+	return 0;
+}
+
+struct rfkill_ops rfkill_regulator_ops = {
+	.set_block = rfkill_regulator_set_block,
+};
+
+static int __devinit rfkill_regulator_probe(struct platform_device *pdev)
+{
+	struct rfkill_regulator_platform_data *pdata = pdev->dev.platform_data;
+	struct rfkill_regulator_data *rfkill_data;
+	struct regulator *vcc;
+	struct rfkill *rf_kill;
+	int ret = 0;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -ENODEV;
+	}
+
+	if (pdata->name == NULL || pdata->type == 0) {
+		dev_err(&pdev->dev, "invalid name or type in platform data\n");
+		return -EINVAL;
+	}
+
+	vcc = regulator_get_exclusive(&pdev->dev, "vrfkill");
+	if (IS_ERR(vcc)) {
+		dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name);
+		ret = PTR_ERR(vcc);
+		goto out;
+	}
+
+	rfkill_data = kzalloc(sizeof(*rfkill_data), GFP_KERNEL);
+	if (rfkill_data == NULL) {
+		ret = -ENOMEM;
+		goto err_data_alloc;
+	}
+
+	rf_kill = rfkill_alloc(pdata->name, &pdev->dev,
+				pdata->type,
+				&rfkill_regulator_ops, rfkill_data);
+	if (rf_kill == NULL) {
+		dev_err(&pdev->dev, "Cannot alloc rfkill device\n");
+		ret = -ENOMEM;
+		goto err_rfkill_alloc;
+	}
+
+	if (regulator_is_enabled(vcc)) {
+		dev_dbg(&pdev->dev, "Regulator already enabled\n");
+		rfkill_data->reg_enabled = 1;
+	}
+	rfkill_data->vcc = vcc;
+	rfkill_data->rf_kill = rf_kill;
+
+	ret = rfkill_register(rf_kill);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot register rfkill device\n");
+		goto err_rfkill_register;
+	}
+
+	platform_set_drvdata(pdev, rfkill_data);
+	dev_info(&pdev->dev, "%s initialized\n", pdata->name);
+
+	return 0;
+
+err_rfkill_register:
+	rfkill_destroy(rf_kill);
+err_rfkill_alloc:
+	kfree(rfkill_data);
+err_data_alloc:
+	regulator_put(vcc);
+out:
+	return ret;
+}
+
+static int __devexit rfkill_regulator_remove(struct platform_device *pdev)
+{
+	struct rfkill_regulator_data *rfkill_data = platform_get_drvdata(pdev);
+	struct rfkill *rf_kill = rfkill_data->rf_kill;
+
+	rfkill_unregister(rf_kill);
+	rfkill_destroy(rf_kill);
+	regulator_put(rfkill_data->vcc);
+	kfree(rfkill_data);
+
+	return 0;
+}
+
+static struct platform_driver rfkill_regulator_driver = {
+	.probe = rfkill_regulator_probe,
+	.remove = __devexit_p(rfkill_regulator_remove),
+	.driver = {
+		.name = "rfkill-regulator",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init rfkill_regulator_init(void)
+{
+	return platform_driver_register(&rfkill_regulator_driver);
+}
+module_init(rfkill_regulator_init);
+
+static void __exit rfkill_regulator_exit(void)
+{
+	platform_driver_unregister(&rfkill_regulator_driver);
+}
+module_exit(rfkill_regulator_exit);
+
+MODULE_AUTHOR("Guiming Zhuo <gmzhuo@gmail.com>");
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("Regulator consumer driver for rfkill");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rfkill-regulator");
-- 
cgit v1.2.3-58-ga151


From f2f5f2a1cedc803a5a517557d436e6cb10c007de Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Date: Tue, 19 Apr 2011 19:29:01 +0530
Subject: ath9k_hw: Get AHB clock information from ath9k_platform_data

Add a bool in ath9k_platform_data to pass AHB clock speed information.
Driver needs this to configure PLL on some SOCs.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.h   | 2 ++
 drivers/net/wireless/ath/ath9k/init.c | 1 +
 include/linux/ath9k_platform.h        | 2 ++
 3 files changed, 5 insertions(+)

(limited to 'include/linux')

diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 450b64263bc9..5a4ba09a2f1c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -846,6 +846,8 @@ struct ath_hw {
 
 	/* Enterprise mode cap */
 	u32 ent_mode;
+
+	bool is_clk_25mhz;
 };
 
 struct ath_bus_ops {
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 1ac8318d82a3..e78b6aefa108 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -574,6 +574,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 		sc->sc_ah->gpio_mask = pdata->gpio_mask;
 		sc->sc_ah->gpio_val = pdata->gpio_val;
 		sc->sc_ah->led_pin = pdata->led_pin;
+		ah->is_clk_25mhz = pdata->is_clk_25mhz;
 	}
 
 	common = ath9k_hw_common(ah);
diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h
index 020387a114e3..60a7c49dcb49 100644
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -28,6 +28,8 @@ struct ath9k_platform_data {
 	int led_pin;
 	u32 gpio_mask;
 	u32 gpio_val;
+
+	bool is_clk_25mhz;
 };
 
 #endif /* _LINUX_ATH9K_PLATFORM_H */
-- 
cgit v1.2.3-58-ga151


From 9f2e731d1d278d853def1567735d8a823668a3c8 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 20 Apr 2011 11:12:30 +0200
Subject: ssb: cc: add & fix defines
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We probably got false positive results for checking PLL being down.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ssb/ssb_driver_chipcommon.h | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
index 2cdf249b4e5f..4f2d77a0c021 100644
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -131,6 +131,9 @@
 #define SSB_CHIPCO_GPIOIRQ		0x0074
 #define SSB_CHIPCO_WATCHDOG		0x0080
 #define SSB_CHIPCO_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  SSB_CHIPCO_GPIOTIMER_OFFTIME	0x0000FFFF
+#define  SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT	0
+#define  SSB_CHIPCO_GPIOTIMER_ONTIME	0xFFFF0000
 #define  SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT	16
 #define SSB_CHIPCO_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
 #define SSB_CHIPCO_CLOCK_N		0x0090
@@ -189,8 +192,10 @@
 #define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
 #define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
 #define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
-#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00010000 /* HT available */
-#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00010000 /* ALP available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00020000 /* HT available */
+#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
+#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
 #define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
 #define SSB_CHIPCO_UART0_DATA		0x0300
 #define SSB_CHIPCO_UART0_IMR		0x0304
-- 
cgit v1.2.3-58-ga151


From 9835a30e980561082beb02ce724f6e555787bc19 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 24 Apr 2011 11:04:19 +0200
Subject: ssb: cc: clear GPIOPULL registers on init
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/driver_chipcommon.c           | 6 ++++++
 include/linux/ssb/ssb_driver_chipcommon.h | 2 ++
 2 files changed, 8 insertions(+)

(limited to 'include/linux')

diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 7c031fdc8205..b4b3733aefcf 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -260,6 +260,12 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc)
 	if (cc->dev->id.revision >= 11)
 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
 	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+
+	if (cc->dev->id.revision >= 20) {
+		chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+		chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
+	}
+
 	ssb_pmu_init(cc);
 	chipco_powercontrol_init(cc);
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
index 4f2d77a0c021..a08d693d8324 100644
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -123,6 +123,8 @@
 #define SSB_CHIPCO_FLASHDATA		0x0048
 #define SSB_CHIPCO_BCAST_ADDR		0x0050
 #define SSB_CHIPCO_BCAST_DATA		0x0054
+#define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
 #define SSB_CHIPCO_GPIOIN		0x0060
 #define SSB_CHIPCO_GPIOOUT		0x0064
 #define SSB_CHIPCO_GPIOOUTEN		0x0068
-- 
cgit v1.2.3-58-ga151


From 04ad1fb2640a4f23e99ccb705c179d64abac03f2 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 23 Apr 2011 19:30:29 +0200
Subject: ssb: update reject bit for Target State Low
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

My 14e4:4315 is SSB_IDLOW_SSBREV_26:
read32 0xfaafcff8 -> 0x600422d5
My 14e4:4328 is SSB_IDLOW_SSBREV_24:
read32 0xfaafcff8 -> 0x400422c5
My 14e4:432b is SSB_IDLOW_SSBREV_26 again:
read32 0xfaafcff8 -> 0x600422d5

For all of them wl driver is using 0x2 reject bit:
write32(0xf98) <- 0x00010002
So it seems SSB 2.3 is the exception using another bit.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/main.c           | 15 +++++++--------
 include/linux/ssb/ssb_regs.h |  2 +-
 2 files changed, 8 insertions(+), 9 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 74aa2cca7d8c..ad3da93a428c 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1117,23 +1117,22 @@ static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
 {
 	u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
 
-	/* The REJECT bit changed position in TMSLOW between
-	 * Backplane revisions. */
+	/* The REJECT bit seems to be different for Backplane rev 2.3 */
 	switch (rev) {
 	case SSB_IDLOW_SSBREV_22:
-		return SSB_TMSLOW_REJECT_22;
+	case SSB_IDLOW_SSBREV_24:
+	case SSB_IDLOW_SSBREV_26:
+		return SSB_TMSLOW_REJECT;
 	case SSB_IDLOW_SSBREV_23:
 		return SSB_TMSLOW_REJECT_23;
-	case SSB_IDLOW_SSBREV_24:     /* TODO - find the proper REJECT bits */
-	case SSB_IDLOW_SSBREV_25:     /* same here */
-	case SSB_IDLOW_SSBREV_26:     /* same here */
+	case SSB_IDLOW_SSBREV_25:     /* TODO - find the proper REJECT bit */
 	case SSB_IDLOW_SSBREV_27:     /* same here */
-		return SSB_TMSLOW_REJECT_23;	/* this is a guess */
+		return SSB_TMSLOW_REJECT;	/* this is a guess */
 	default:
 		printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
 		WARN_ON(1);
 	}
-	return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
+	return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
 }
 
 int ssb_device_is_enabled(struct ssb_device *dev)
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 402955ae48ce..efbf459d571c 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -97,7 +97,7 @@
 #define  SSB_INTVEC_ENET1	0x00000040 /* Enable interrupts for enet 1 */
 #define SSB_TMSLOW		0x0F98     /* SB Target State Low */
 #define  SSB_TMSLOW_RESET	0x00000001 /* Reset */
-#define  SSB_TMSLOW_REJECT_22	0x00000002 /* Reject (Backplane rev 2.2) */
+#define  SSB_TMSLOW_REJECT	0x00000002 /* Reject (Standard Backplane) */
 #define  SSB_TMSLOW_REJECT_23	0x00000004 /* Reject (Backplane rev 2.3) */
 #define  SSB_TMSLOW_CLOCK	0x00010000 /* Clock Enable */
 #define  SSB_TMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
-- 
cgit v1.2.3-58-ga151


From 0a14842f5a3c0e88a1e59fac5c3025db39721f74 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 20 Apr 2011 09:27:32 +0000
Subject: net: filter: Just In Time compiler for x86-64

In order to speedup packet filtering, here is an implementation of a
JIT compiler for x86_64

It is disabled by default, and must be enabled by the admin.

echo 1 >/proc/sys/net/core/bpf_jit_enable

It uses module_alloc() and module_free() to get memory in the 2GB text
kernel range since we call helpers functions from the generated code.

EAX : BPF A accumulator
EBX : BPF X accumulator
RDI : pointer to skb   (first argument given to JIT function)
RBP : frame pointer (even if CONFIG_FRAME_POINTER=n)
r9d : skb->len - skb->data_len (headlen)
r8  : skb->data

To get a trace of generated code, use :

echo 2 >/proc/sys/net/core/bpf_jit_enable

Example of generated code :

# tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24

flen=18 proglen=147 pass=3 image=ffffffffa00b5000
JIT code: ffffffffa00b5000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 60
JIT code: ffffffffa00b5010: 44 2b 4f 64 4c 8b 87 b8 00 00 00 be 0c 00 00 00
JIT code: ffffffffa00b5020: e8 24 7b f7 e0 3d 00 08 00 00 75 28 be 1a 00 00
JIT code: ffffffffa00b5030: 00 e8 fe 7a f7 e0 24 00 3d 00 14 a8 c0 74 49 be
JIT code: ffffffffa00b5040: 1e 00 00 00 e8 eb 7a f7 e0 24 00 3d 00 14 a8 c0
JIT code: ffffffffa00b5050: 74 36 eb 3b 3d 06 08 00 00 74 07 3d 35 80 00 00
JIT code: ffffffffa00b5060: 75 2d be 1c 00 00 00 e8 c8 7a f7 e0 24 00 3d 00
JIT code: ffffffffa00b5070: 14 a8 c0 74 13 be 26 00 00 00 e8 b5 7a f7 e0 24
JIT code: ffffffffa00b5080: 00 3d 00 14 a8 c0 75 07 b8 ff ff 00 00 eb 02 31
JIT code: ffffffffa00b5090: c0 c9 c3

BPF program is 144 bytes long, so native program is almost same size ;)

(000) ldh      [12]
(001) jeq      #0x800           jt 2    jf 8
(002) ld       [26]
(003) and      #0xffffff00
(004) jeq      #0xc0a81400      jt 16   jf 5
(005) ld       [30]
(006) and      #0xffffff00
(007) jeq      #0xc0a81400      jt 16   jf 17
(008) jeq      #0x806           jt 10   jf 9
(009) jeq      #0x8035          jt 10   jf 17
(010) ld       [28]
(011) and      #0xffffff00
(012) jeq      #0xc0a81400      jt 16   jf 13
(013) ld       [38]
(014) and      #0xffffff00
(015) jeq      #0xc0a81400      jt 16   jf 17
(016) ret      #65535
(017) ret      #0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/sysctl/net.txt |  11 +
 MAINTAINERS                  |   1 +
 arch/x86/Kbuild              |   1 +
 arch/x86/Kconfig             |   1 +
 arch/x86/net/Makefile        |   4 +
 arch/x86/net/bpf_jit.S       | 140 +++++++++
 arch/x86/net/bpf_jit_comp.c  | 654 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/filter.h       |  76 +++++
 include/linux/netdevice.h    |   1 +
 include/linux/skbuff.h       |   2 +-
 net/Kconfig                  |  13 +
 net/core/filter.c            |  65 +----
 net/core/sysctl_net_core.c   |   9 +
 net/packet/af_packet.c       |   2 +-
 14 files changed, 918 insertions(+), 62 deletions(-)
 create mode 100644 arch/x86/net/Makefile
 create mode 100644 arch/x86/net/bpf_jit.S
 create mode 100644 arch/x86/net/bpf_jit_comp.c

(limited to 'include/linux')

diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index cbd05ffc606b..3201a7097e4d 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -32,6 +32,17 @@ Table : Subdirectories in /proc/sys/net
 1. /proc/sys/net/core - Network core options
 -------------------------------------------------------
 
+bpf_jit_enable
+--------------
+
+This enables Berkeley Packet Filter Just in Time compiler.
+Currently supported on x86_64 architecture, bpf_jit provides a framework
+to speed packet filtering, the one used by tcpdump/libpcap for example.
+Values :
+	0 - disable the JIT (default value)
+	1 - enable the JIT
+	2 - enable the JIT and ask the compiler to emit traces on kernel log.
+
 rmem_default
 ------------
 
diff --git a/MAINTAINERS b/MAINTAINERS
index b5266ad50167..17c0917a26ea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4372,6 +4372,7 @@ S:	Maintained
 F:	net/ipv4/
 F:	net/ipv6/
 F:	include/net/ip*
+F:	arch/x86/net/*
 
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
 M:	Paul Moore <paul.moore@hp.com>
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index 0e103236b754..0e9dec6cadd1 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -15,3 +15,4 @@ obj-y += vdso/
 obj-$(CONFIG_IA32_EMULATION) += ia32/
 
 obj-y += platform/
+obj-y += net/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cc6c53a95bfd..855a1bdc437d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -72,6 +72,7 @@ config X86
 	select IRQ_FORCED_THREADING
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select ARCH_NO_SYSDEV_OPS
+	select HAVE_BPF_JIT if X86_64
 
 config INSTRUCTION_DECODER
 	def_bool (KPROBES || PERF_EVENTS)
diff --git a/arch/x86/net/Makefile b/arch/x86/net/Makefile
new file mode 100644
index 000000000000..90568c33ddb0
--- /dev/null
+++ b/arch/x86/net/Makefile
@@ -0,0 +1,4 @@
+#
+# Arch-specific network modules
+#
+obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_comp.o
diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
new file mode 100644
index 000000000000..66870223f8c5
--- /dev/null
+++ b/arch/x86/net/bpf_jit.S
@@ -0,0 +1,140 @@
+/* bpf_jit.S : BPF JIT helper functions
+ *
+ * Copyright (C) 2011 Eric Dumazet (eric.dumazet@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+/*
+ * Calling convention :
+ * rdi : skb pointer
+ * esi : offset of byte(s) to fetch in skb (can be scratched)
+ * r8  : copy of skb->data
+ * r9d : hlen = skb->len - skb->data_len
+ */
+#define SKBDATA	%r8
+
+sk_load_word_ind:
+	.globl	sk_load_word_ind
+
+	add	%ebx,%esi	/* offset += X */
+#	test    %esi,%esi	/* if (offset < 0) goto bpf_error; */
+	js	bpf_error
+
+sk_load_word:
+	.globl	sk_load_word
+
+	mov	%r9d,%eax		# hlen
+	sub	%esi,%eax		# hlen - offset
+	cmp	$3,%eax
+	jle	bpf_slow_path_word
+	mov     (SKBDATA,%rsi),%eax
+	bswap   %eax  			/* ntohl() */
+	ret
+
+
+sk_load_half_ind:
+	.globl sk_load_half_ind
+
+	add	%ebx,%esi	/* offset += X */
+	js	bpf_error
+
+sk_load_half:
+	.globl	sk_load_half
+
+	mov	%r9d,%eax
+	sub	%esi,%eax		#	hlen - offset
+	cmp	$1,%eax
+	jle	bpf_slow_path_half
+	movzwl	(SKBDATA,%rsi),%eax
+	rol	$8,%ax			# ntohs()
+	ret
+
+sk_load_byte_ind:
+	.globl sk_load_byte_ind
+	add	%ebx,%esi	/* offset += X */
+	js	bpf_error
+
+sk_load_byte:
+	.globl	sk_load_byte
+
+	cmp	%esi,%r9d   /* if (offset >= hlen) goto bpf_slow_path_byte */
+	jle	bpf_slow_path_byte
+	movzbl	(SKBDATA,%rsi),%eax
+	ret
+
+/**
+ * sk_load_byte_msh - BPF_S_LDX_B_MSH helper
+ *
+ * Implements BPF_S_LDX_B_MSH : ldxb  4*([offset]&0xf)
+ * Must preserve A accumulator (%eax)
+ * Inputs : %esi is the offset value, already known positive
+ */
+ENTRY(sk_load_byte_msh)
+	CFI_STARTPROC
+	cmp	%esi,%r9d      /* if (offset >= hlen) goto bpf_slow_path_byte_msh */
+	jle	bpf_slow_path_byte_msh
+	movzbl	(SKBDATA,%rsi),%ebx
+	and	$15,%bl
+	shl	$2,%bl
+	ret
+	CFI_ENDPROC
+ENDPROC(sk_load_byte_msh)
+
+bpf_error:
+# force a return 0 from jit handler
+	xor		%eax,%eax
+	mov		-8(%rbp),%rbx
+	leaveq
+	ret
+
+/* rsi contains offset and can be scratched */
+#define bpf_slow_path_common(LEN)		\
+	push	%rdi;    /* save skb */		\
+	push	%r9;				\
+	push	SKBDATA;			\
+/* rsi already has offset */			\
+	mov	$LEN,%ecx;	/* len */	\
+	lea	-12(%rbp),%rdx;			\
+	call	skb_copy_bits;			\
+	test    %eax,%eax;			\
+	pop	SKBDATA;			\
+	pop	%r9;				\
+	pop	%rdi
+
+
+bpf_slow_path_word:
+	bpf_slow_path_common(4)
+	js	bpf_error
+	mov	-12(%rbp),%eax
+	bswap	%eax
+	ret
+
+bpf_slow_path_half:
+	bpf_slow_path_common(2)
+	js	bpf_error
+	mov	-12(%rbp),%ax
+	rol	$8,%ax
+	movzwl	%ax,%eax
+	ret
+
+bpf_slow_path_byte:
+	bpf_slow_path_common(1)
+	js	bpf_error
+	movzbl	-12(%rbp),%eax
+	ret
+
+bpf_slow_path_byte_msh:
+	xchg	%eax,%ebx /* dont lose A , X is about to be scratched */
+	bpf_slow_path_common(1)
+	js	bpf_error
+	movzbl	-12(%rbp),%eax
+	and	$15,%al
+	shl	$2,%al
+	xchg	%eax,%ebx
+	ret
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
new file mode 100644
index 000000000000..bfab3fa10edc
--- /dev/null
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -0,0 +1,654 @@
+/* bpf_jit_comp.c : BPF JIT compiler
+ *
+ * Copyright (C) 2011 Eric Dumazet (eric.dumazet@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/moduleloader.h>
+#include <asm/cacheflush.h>
+#include <linux/netdevice.h>
+#include <linux/filter.h>
+
+/*
+ * Conventions :
+ *  EAX : BPF A accumulator
+ *  EBX : BPF X accumulator
+ *  RDI : pointer to skb   (first argument given to JIT function)
+ *  RBP : frame pointer (even if CONFIG_FRAME_POINTER=n)
+ *  ECX,EDX,ESI : scratch registers
+ *  r9d : skb->len - skb->data_len (headlen)
+ *  r8  : skb->data
+ * -8(RBP) : saved RBX value
+ * -16(RBP)..-80(RBP) : BPF_MEMWORDS values
+ */
+int bpf_jit_enable __read_mostly;
+
+/*
+ * assembly code in arch/x86/net/bpf_jit.S
+ */
+extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+extern u8 sk_load_word_ind[], sk_load_half_ind[], sk_load_byte_ind[];
+
+static inline u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
+{
+	if (len == 1)
+		*ptr = bytes;
+	else if (len == 2)
+		*(u16 *)ptr = bytes;
+	else {
+		*(u32 *)ptr = bytes;
+		barrier();
+	}
+	return ptr + len;
+}
+
+#define EMIT(bytes, len)	do { prog = emit_code(prog, bytes, len); } while (0)
+
+#define EMIT1(b1)		EMIT(b1, 1)
+#define EMIT2(b1, b2)		EMIT((b1) + ((b2) << 8), 2)
+#define EMIT3(b1, b2, b3)	EMIT((b1) + ((b2) << 8) + ((b3) << 16), 3)
+#define EMIT4(b1, b2, b3, b4)   EMIT((b1) + ((b2) << 8) + ((b3) << 16) + ((b4) << 24), 4)
+#define EMIT1_off32(b1, off)	do { EMIT1(b1); EMIT(off, 4);} while (0)
+
+#define CLEAR_A() EMIT2(0x31, 0xc0) /* xor %eax,%eax */
+#define CLEAR_X() EMIT2(0x31, 0xdb) /* xor %ebx,%ebx */
+
+static inline bool is_imm8(int value)
+{
+	return value <= 127 && value >= -128;
+}
+
+static inline bool is_near(int offset)
+{
+	return offset <= 127 && offset >= -128;
+}
+
+#define EMIT_JMP(offset)						\
+do {									\
+	if (offset) {							\
+		if (is_near(offset))					\
+			EMIT2(0xeb, offset); /* jmp .+off8 */		\
+		else							\
+			EMIT1_off32(0xe9, offset); /* jmp .+off32 */	\
+	}								\
+} while (0)
+
+/* list of x86 cond jumps opcodes (. + s8)
+ * Add 0x10 (and an extra 0x0f) to generate far jumps (. + s32)
+ */
+#define X86_JB  0x72
+#define X86_JAE 0x73
+#define X86_JE  0x74
+#define X86_JNE 0x75
+#define X86_JBE 0x76
+#define X86_JA  0x77
+
+#define EMIT_COND_JMP(op, offset)				\
+do {								\
+	if (is_near(offset))					\
+		EMIT2(op, offset); /* jxx .+off8 */		\
+	else {							\
+		EMIT2(0x0f, op + 0x10);				\
+		EMIT(offset, 4); /* jxx .+off32 */		\
+	}							\
+} while (0)
+
+#define COND_SEL(CODE, TOP, FOP)	\
+	case CODE:			\
+		t_op = TOP;		\
+		f_op = FOP;		\
+		goto cond_branch
+
+
+#define SEEN_DATAREF 1 /* might call external helpers */
+#define SEEN_XREG    2 /* ebx is used */
+#define SEEN_MEM     4 /* use mem[] for temporary storage */
+
+static inline void bpf_flush_icache(void *start, void *end)
+{
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(KERNEL_DS);
+	smp_wmb();
+	flush_icache_range((unsigned long)start, (unsigned long)end);
+	set_fs(old_fs);
+}
+
+
+void bpf_jit_compile(struct sk_filter *fp)
+{
+	u8 temp[64];
+	u8 *prog;
+	unsigned int proglen, oldproglen = 0;
+	int ilen, i;
+	int t_offset, f_offset;
+	u8 t_op, f_op, seen = 0, pass;
+	u8 *image = NULL;
+	u8 *func;
+	int pc_ret0 = -1; /* bpf index of first RET #0 instruction (if any) */
+	unsigned int cleanup_addr; /* epilogue code offset */
+	unsigned int *addrs;
+	const struct sock_filter *filter = fp->insns;
+	int flen = fp->len;
+
+	if (!bpf_jit_enable)
+		return;
+
+	addrs = kmalloc(flen * sizeof(*addrs), GFP_KERNEL);
+	if (addrs == NULL)
+		return;
+
+	/* Before first pass, make a rough estimation of addrs[]
+	 * each bpf instruction is translated to less than 64 bytes
+	 */
+	for (proglen = 0, i = 0; i < flen; i++) {
+		proglen += 64;
+		addrs[i] = proglen;
+	}
+	cleanup_addr = proglen; /* epilogue address */
+
+	for (pass = 0; pass < 10; pass++) {
+		/* no prologue/epilogue for trivial filters (RET something) */
+		proglen = 0;
+		prog = temp;
+
+		if (seen) {
+			EMIT4(0x55, 0x48, 0x89, 0xe5); /* push %rbp; mov %rsp,%rbp */
+			EMIT4(0x48, 0x83, 0xec, 96);	/* subq  $96,%rsp	*/
+			/* note : must save %rbx in case bpf_error is hit */
+			if (seen & (SEEN_XREG | SEEN_DATAREF))
+				EMIT4(0x48, 0x89, 0x5d, 0xf8); /* mov %rbx, -8(%rbp) */
+			if (seen & SEEN_XREG)
+				CLEAR_X(); /* make sure we dont leek kernel memory */
+
+			/*
+			 * If this filter needs to access skb data,
+			 * loads r9 and r8 with :
+			 *  r9 = skb->len - skb->data_len
+			 *  r8 = skb->data
+			 */
+			if (seen & SEEN_DATAREF) {
+				if (offsetof(struct sk_buff, len) <= 127)
+					/* mov    off8(%rdi),%r9d */
+					EMIT4(0x44, 0x8b, 0x4f, offsetof(struct sk_buff, len));
+				else {
+					/* mov    off32(%rdi),%r9d */
+					EMIT3(0x44, 0x8b, 0x8f);
+					EMIT(offsetof(struct sk_buff, len), 4);
+				}
+				if (is_imm8(offsetof(struct sk_buff, data_len)))
+					/* sub    off8(%rdi),%r9d */
+					EMIT4(0x44, 0x2b, 0x4f, offsetof(struct sk_buff, data_len));
+				else {
+					EMIT3(0x44, 0x2b, 0x8f);
+					EMIT(offsetof(struct sk_buff, data_len), 4);
+				}
+
+				if (is_imm8(offsetof(struct sk_buff, data)))
+					/* mov off8(%rdi),%r8 */
+					EMIT4(0x4c, 0x8b, 0x47, offsetof(struct sk_buff, data));
+				else {
+					/* mov off32(%rdi),%r8 */
+					EMIT3(0x4c, 0x8b, 0x87);
+					EMIT(offsetof(struct sk_buff, data), 4);
+				}
+			}
+		}
+
+		switch (filter[0].code) {
+		case BPF_S_RET_K:
+		case BPF_S_LD_W_LEN:
+		case BPF_S_ANC_PROTOCOL:
+		case BPF_S_ANC_IFINDEX:
+		case BPF_S_ANC_MARK:
+		case BPF_S_ANC_RXHASH:
+		case BPF_S_ANC_CPU:
+		case BPF_S_ANC_QUEUE:
+		case BPF_S_LD_W_ABS:
+		case BPF_S_LD_H_ABS:
+		case BPF_S_LD_B_ABS:
+			/* first instruction sets A register (or is RET 'constant') */
+			break;
+		default:
+			/* make sure we dont leak kernel information to user */
+			CLEAR_A(); /* A = 0 */
+		}
+
+		for (i = 0; i < flen; i++) {
+			unsigned int K = filter[i].k;
+
+			switch (filter[i].code) {
+			case BPF_S_ALU_ADD_X: /* A += X; */
+				seen |= SEEN_XREG;
+				EMIT2(0x01, 0xd8);		/* add %ebx,%eax */
+				break;
+			case BPF_S_ALU_ADD_K: /* A += K; */
+				if (!K)
+					break;
+				if (is_imm8(K))
+					EMIT3(0x83, 0xc0, K);	/* add imm8,%eax */
+				else
+					EMIT1_off32(0x05, K);	/* add imm32,%eax */
+				break;
+			case BPF_S_ALU_SUB_X: /* A -= X; */
+				seen |= SEEN_XREG;
+				EMIT2(0x29, 0xd8);		/* sub    %ebx,%eax */
+				break;
+			case BPF_S_ALU_SUB_K: /* A -= K */
+				if (!K)
+					break;
+				if (is_imm8(K))
+					EMIT3(0x83, 0xe8, K); /* sub imm8,%eax */
+				else
+					EMIT1_off32(0x2d, K); /* sub imm32,%eax */
+				break;
+			case BPF_S_ALU_MUL_X: /* A *= X; */
+				seen |= SEEN_XREG;
+				EMIT3(0x0f, 0xaf, 0xc3);	/* imul %ebx,%eax */
+				break;
+			case BPF_S_ALU_MUL_K: /* A *= K */
+				if (is_imm8(K))
+					EMIT3(0x6b, 0xc0, K); /* imul imm8,%eax,%eax */
+				else {
+					EMIT2(0x69, 0xc0);		/* imul imm32,%eax */
+					EMIT(K, 4);
+				}
+				break;
+			case BPF_S_ALU_DIV_X: /* A /= X; */
+				seen |= SEEN_XREG;
+				EMIT2(0x85, 0xdb);	/* test %ebx,%ebx */
+				if (pc_ret0 != -1)
+					EMIT_COND_JMP(X86_JE, addrs[pc_ret0] - (addrs[i] - 4));
+				else {
+					EMIT_COND_JMP(X86_JNE, 2 + 5);
+					CLEAR_A();
+					EMIT1_off32(0xe9, cleanup_addr - (addrs[i] - 4)); /* jmp .+off32 */
+				}
+				EMIT4(0x31, 0xd2, 0xf7, 0xf3); /* xor %edx,%edx; div %ebx */
+				break;
+			case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
+				EMIT3(0x48, 0x69, 0xc0); /* imul imm32,%rax,%rax */
+				EMIT(K, 4);
+				EMIT4(0x48, 0xc1, 0xe8, 0x20); /* shr $0x20,%rax */
+				break;
+			case BPF_S_ALU_AND_X:
+				seen |= SEEN_XREG;
+				EMIT2(0x21, 0xd8);		/* and %ebx,%eax */
+				break;
+			case BPF_S_ALU_AND_K:
+				if (K >= 0xFFFFFF00) {
+					EMIT2(0x24, K & 0xFF); /* and imm8,%al */
+				} else if (K >= 0xFFFF0000) {
+					EMIT2(0x66, 0x25);	/* and imm16,%ax */
+					EMIT2(K, 2);
+				} else {
+					EMIT1_off32(0x25, K);	/* and imm32,%eax */
+				}
+				break;
+			case BPF_S_ALU_OR_X:
+				seen |= SEEN_XREG;
+				EMIT2(0x09, 0xd8);		/* or %ebx,%eax */
+				break;
+			case BPF_S_ALU_OR_K:
+				if (is_imm8(K))
+					EMIT3(0x83, 0xc8, K); /* or imm8,%eax */
+				else
+					EMIT1_off32(0x0d, K);	/* or imm32,%eax */
+				break;
+			case BPF_S_ALU_LSH_X: /* A <<= X; */
+				seen |= SEEN_XREG;
+				EMIT4(0x89, 0xd9, 0xd3, 0xe0);	/* mov %ebx,%ecx; shl %cl,%eax */
+				break;
+			case BPF_S_ALU_LSH_K:
+				if (K == 0)
+					break;
+				else if (K == 1)
+					EMIT2(0xd1, 0xe0); /* shl %eax */
+				else
+					EMIT3(0xc1, 0xe0, K);
+				break;
+			case BPF_S_ALU_RSH_X: /* A >>= X; */
+				seen |= SEEN_XREG;
+				EMIT4(0x89, 0xd9, 0xd3, 0xe8);	/* mov %ebx,%ecx; shr %cl,%eax */
+				break;
+			case BPF_S_ALU_RSH_K: /* A >>= K; */
+				if (K == 0)
+					break;
+				else if (K == 1)
+					EMIT2(0xd1, 0xe8); /* shr %eax */
+				else
+					EMIT3(0xc1, 0xe8, K);
+				break;
+			case BPF_S_ALU_NEG:
+				EMIT2(0xf7, 0xd8);		/* neg %eax */
+				break;
+			case BPF_S_RET_K:
+				if (!K) {
+					if (pc_ret0 == -1)
+						pc_ret0 = i;
+					CLEAR_A();
+				} else {
+					EMIT1_off32(0xb8, K);	/* mov $imm32,%eax */
+				}
+				/* fallinto */
+			case BPF_S_RET_A:
+				if (seen) {
+					if (i != flen - 1) {
+						EMIT_JMP(cleanup_addr - addrs[i]);
+						break;
+					}
+					if (seen & SEEN_XREG)
+						EMIT4(0x48, 0x8b, 0x5d, 0xf8);  /* mov  -8(%rbp),%rbx */
+					EMIT1(0xc9);		/* leaveq */
+				}
+				EMIT1(0xc3);		/* ret */
+				break;
+			case BPF_S_MISC_TAX: /* X = A */
+				seen |= SEEN_XREG;
+				EMIT2(0x89, 0xc3);	/* mov    %eax,%ebx */
+				break;
+			case BPF_S_MISC_TXA: /* A = X */
+				seen |= SEEN_XREG;
+				EMIT2(0x89, 0xd8);	/* mov    %ebx,%eax */
+				break;
+			case BPF_S_LD_IMM: /* A = K */
+				if (!K)
+					CLEAR_A();
+				else
+					EMIT1_off32(0xb8, K); /* mov $imm32,%eax */
+				break;
+			case BPF_S_LDX_IMM: /* X = K */
+				seen |= SEEN_XREG;
+				if (!K)
+					CLEAR_X();
+				else
+					EMIT1_off32(0xbb, K); /* mov $imm32,%ebx */
+				break;
+			case BPF_S_LD_MEM: /* A = mem[K] : mov off8(%rbp),%eax */
+				seen |= SEEN_MEM;
+				EMIT3(0x8b, 0x45, 0xf0 - K*4);
+				break;
+			case BPF_S_LDX_MEM: /* X = mem[K] : mov off8(%rbp),%ebx */
+				seen |= SEEN_XREG | SEEN_MEM;
+				EMIT3(0x8b, 0x5d, 0xf0 - K*4);
+				break;
+			case BPF_S_ST: /* mem[K] = A : mov %eax,off8(%rbp) */
+				seen |= SEEN_MEM;
+				EMIT3(0x89, 0x45, 0xf0 - K*4);
+				break;
+			case BPF_S_STX: /* mem[K] = X : mov %ebx,off8(%rbp) */
+				seen |= SEEN_XREG | SEEN_MEM;
+				EMIT3(0x89, 0x5d, 0xf0 - K*4);
+				break;
+			case BPF_S_LD_W_LEN: /*	A = skb->len; */
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
+				if (is_imm8(offsetof(struct sk_buff, len)))
+					/* mov    off8(%rdi),%eax */
+					EMIT3(0x8b, 0x47, offsetof(struct sk_buff, len));
+				else {
+					EMIT2(0x8b, 0x87);
+					EMIT(offsetof(struct sk_buff, len), 4);
+				}
+				break;
+			case BPF_S_LDX_W_LEN: /* X = skb->len; */
+				seen |= SEEN_XREG;
+				if (is_imm8(offsetof(struct sk_buff, len)))
+					/* mov off8(%rdi),%ebx */
+					EMIT3(0x8b, 0x5f, offsetof(struct sk_buff, len));
+				else {
+					EMIT2(0x8b, 0x9f);
+					EMIT(offsetof(struct sk_buff, len), 4);
+				}
+				break;
+			case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol); */
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, protocol) != 2);
+				if (is_imm8(offsetof(struct sk_buff, protocol))) {
+					/* movzwl off8(%rdi),%eax */
+					EMIT4(0x0f, 0xb7, 0x47, offsetof(struct sk_buff, protocol));
+				} else {
+					EMIT3(0x0f, 0xb7, 0x87); /* movzwl off32(%rdi),%eax */
+					EMIT(offsetof(struct sk_buff, protocol), 4);
+				}
+				EMIT2(0x86, 0xc4); /* ntohs() : xchg   %al,%ah */
+				break;
+			case BPF_S_ANC_IFINDEX:
+				if (is_imm8(offsetof(struct sk_buff, dev))) {
+					/* movq off8(%rdi),%rax */
+					EMIT4(0x48, 0x8b, 0x47, offsetof(struct sk_buff, dev));
+				} else {
+					EMIT3(0x48, 0x8b, 0x87); /* movq off32(%rdi),%rax */
+					EMIT(offsetof(struct sk_buff, dev), 4);
+				}
+				EMIT3(0x48, 0x85, 0xc0);	/* test %rax,%rax */
+				EMIT_COND_JMP(X86_JE, cleanup_addr - (addrs[i] - 6));
+				BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
+				EMIT2(0x8b, 0x80);	/* mov off32(%rax),%eax */
+				EMIT(offsetof(struct net_device, ifindex), 4);
+				break;
+			case BPF_S_ANC_MARK:
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
+				if (is_imm8(offsetof(struct sk_buff, mark))) {
+					/* mov off8(%rdi),%eax */
+					EMIT3(0x8b, 0x47, offsetof(struct sk_buff, mark));
+				} else {
+					EMIT2(0x8b, 0x87);
+					EMIT(offsetof(struct sk_buff, mark), 4);
+				}
+				break;
+			case BPF_S_ANC_RXHASH:
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
+				if (is_imm8(offsetof(struct sk_buff, rxhash))) {
+					/* mov off8(%rdi),%eax */
+					EMIT3(0x8b, 0x47, offsetof(struct sk_buff, rxhash));
+				} else {
+					EMIT2(0x8b, 0x87);
+					EMIT(offsetof(struct sk_buff, rxhash), 4);
+				}
+				break;
+			case BPF_S_ANC_QUEUE:
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, queue_mapping) != 2);
+				if (is_imm8(offsetof(struct sk_buff, queue_mapping))) {
+					/* movzwl off8(%rdi),%eax */
+					EMIT4(0x0f, 0xb7, 0x47, offsetof(struct sk_buff, queue_mapping));
+				} else {
+					EMIT3(0x0f, 0xb7, 0x87); /* movzwl off32(%rdi),%eax */
+					EMIT(offsetof(struct sk_buff, queue_mapping), 4);
+				}
+				break;
+			case BPF_S_ANC_CPU:
+#ifdef CONFIG_SMP
+				EMIT4(0x65, 0x8b, 0x04, 0x25); /* mov %gs:off32,%eax */
+				EMIT((u32)(unsigned long)&cpu_number, 4); /* A = smp_processor_id(); */
+#else
+				CLEAR_A();
+#endif
+				break;
+			case BPF_S_LD_W_ABS:
+				func = sk_load_word;
+common_load:			seen |= SEEN_DATAREF;
+				if ((int)K < 0)
+					goto out;
+				t_offset = func - (image + addrs[i]);
+				EMIT1_off32(0xbe, K); /* mov imm32,%esi */
+				EMIT1_off32(0xe8, t_offset); /* call */
+				break;
+			case BPF_S_LD_H_ABS:
+				func = sk_load_half;
+				goto common_load;
+			case BPF_S_LD_B_ABS:
+				func = sk_load_byte;
+				goto common_load;
+			case BPF_S_LDX_B_MSH:
+				if ((int)K < 0) {
+					if (pc_ret0 != -1) {
+						EMIT_JMP(addrs[pc_ret0] - addrs[i]);
+						break;
+					}
+					CLEAR_A();
+					EMIT_JMP(cleanup_addr - addrs[i]);
+					break;
+				}
+				seen |= SEEN_DATAREF | SEEN_XREG;
+				t_offset = sk_load_byte_msh - (image + addrs[i]);
+				EMIT1_off32(0xbe, K);	/* mov imm32,%esi */
+				EMIT1_off32(0xe8, t_offset); /* call sk_load_byte_msh */
+				break;
+			case BPF_S_LD_W_IND:
+				func = sk_load_word_ind;
+common_load_ind:		seen |= SEEN_DATAREF | SEEN_XREG;
+				t_offset = func - (image + addrs[i]);
+				EMIT1_off32(0xbe, K);	/* mov imm32,%esi   */
+				EMIT1_off32(0xe8, t_offset);	/* call sk_load_xxx_ind */
+				break;
+			case BPF_S_LD_H_IND:
+				func = sk_load_half_ind;
+				goto common_load_ind;
+			case BPF_S_LD_B_IND:
+				func = sk_load_byte_ind;
+				goto common_load_ind;
+			case BPF_S_JMP_JA:
+				t_offset = addrs[i + K] - addrs[i];
+				EMIT_JMP(t_offset);
+				break;
+			COND_SEL(BPF_S_JMP_JGT_K, X86_JA, X86_JBE);
+			COND_SEL(BPF_S_JMP_JGE_K, X86_JAE, X86_JB);
+			COND_SEL(BPF_S_JMP_JEQ_K, X86_JE, X86_JNE);
+			COND_SEL(BPF_S_JMP_JSET_K,X86_JNE, X86_JE);
+			COND_SEL(BPF_S_JMP_JGT_X, X86_JA, X86_JBE);
+			COND_SEL(BPF_S_JMP_JGE_X, X86_JAE, X86_JB);
+			COND_SEL(BPF_S_JMP_JEQ_X, X86_JE, X86_JNE);
+			COND_SEL(BPF_S_JMP_JSET_X,X86_JNE, X86_JE);
+
+cond_branch:			f_offset = addrs[i + filter[i].jf] - addrs[i];
+				t_offset = addrs[i + filter[i].jt] - addrs[i];
+
+				/* same targets, can avoid doing the test :) */
+				if (filter[i].jt == filter[i].jf) {
+					EMIT_JMP(t_offset);
+					break;
+				}
+
+				switch (filter[i].code) {
+				case BPF_S_JMP_JGT_X:
+				case BPF_S_JMP_JGE_X:
+				case BPF_S_JMP_JEQ_X:
+					seen |= SEEN_XREG;
+					EMIT2(0x39, 0xd8); /* cmp %ebx,%eax */
+					break;
+				case BPF_S_JMP_JSET_X:
+					seen |= SEEN_XREG;
+					EMIT2(0x85, 0xd8); /* test %ebx,%eax */
+					break;
+				case BPF_S_JMP_JEQ_K:
+					if (K == 0) {
+						EMIT2(0x85, 0xc0); /* test   %eax,%eax */
+						break;
+					}
+				case BPF_S_JMP_JGT_K:
+				case BPF_S_JMP_JGE_K:
+					if (K <= 127)
+						EMIT3(0x83, 0xf8, K); /* cmp imm8,%eax */
+					else
+						EMIT1_off32(0x3d, K); /* cmp imm32,%eax */
+					break;
+				case BPF_S_JMP_JSET_K:
+					if (K <= 0xFF)
+						EMIT2(0xa8, K); /* test imm8,%al */
+					else if (!(K & 0xFFFF00FF))
+						EMIT3(0xf6, 0xc4, K >> 8); /* test imm8,%ah */
+					else if (K <= 0xFFFF) {
+						EMIT2(0x66, 0xa9); /* test imm16,%ax */
+						EMIT(K, 2);
+					} else {
+						EMIT1_off32(0xa9, K); /* test imm32,%eax */
+					}
+					break;
+				}
+				if (filter[i].jt != 0) {
+					if (filter[i].jf)
+						t_offset += is_near(f_offset) ? 2 : 6;
+					EMIT_COND_JMP(t_op, t_offset);
+					if (filter[i].jf)
+						EMIT_JMP(f_offset);
+					break;
+				}
+				EMIT_COND_JMP(f_op, f_offset);
+				break;
+			default:
+				/* hmm, too complex filter, give up with jit compiler */
+				goto out;
+			}
+			ilen = prog - temp;
+			if (image) {
+				if (unlikely(proglen + ilen > oldproglen)) {
+					pr_err("bpb_jit_compile fatal error\n");
+					kfree(addrs);
+					module_free(NULL, image);
+					return;
+				}
+				memcpy(image + proglen, temp, ilen);
+			}
+			proglen += ilen;
+			addrs[i] = proglen;
+			prog = temp;
+		}
+		/* last bpf instruction is always a RET :
+		 * use it to give the cleanup instruction(s) addr
+		 */
+		cleanup_addr = proglen - 1; /* ret */
+		if (seen)
+			cleanup_addr -= 1; /* leaveq */
+		if (seen & SEEN_XREG)
+			cleanup_addr -= 4; /* mov  -8(%rbp),%rbx */
+
+		if (image) {
+			WARN_ON(proglen != oldproglen);
+			break;
+		}
+		if (proglen == oldproglen) {
+			image = module_alloc(max_t(unsigned int,
+						   proglen,
+						   sizeof(struct work_struct)));
+			if (!image)
+				goto out;
+		}
+		oldproglen = proglen;
+	}
+	if (bpf_jit_enable > 1)
+		pr_err("flen=%d proglen=%u pass=%d image=%p\n",
+		       flen, proglen, pass, image);
+
+	if (image) {
+		if (bpf_jit_enable > 1)
+			print_hex_dump(KERN_ERR, "JIT code: ", DUMP_PREFIX_ADDRESS,
+				       16, 1, image, proglen, false);
+
+		bpf_flush_icache(image, image + proglen);
+
+		fp->bpf_func = (void *)image;
+	}
+out:
+	kfree(addrs);
+	return;
+}
+
+static void jit_free_defer(struct work_struct *arg)
+{
+	module_free(NULL, arg);
+}
+
+/* run from softirq, we must use a work_struct to call
+ * module_free() from process context
+ */
+void bpf_jit_free(struct sk_filter *fp)
+{
+	if (fp->bpf_func != sk_run_filter) {
+		struct work_struct *work = (struct work_struct *)fp->bpf_func;
+
+		INIT_WORK(work, jit_free_defer);
+		schedule_work(work);
+	}
+}
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 45266b75409a..4609b85e559d 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -135,6 +135,8 @@ struct sk_filter
 {
 	atomic_t		refcnt;
 	unsigned int         	len;	/* Number of filter blocks */
+	unsigned int		(*bpf_func)(const struct sk_buff *skb,
+					    const struct sock_filter *filter);
 	struct rcu_head		rcu;
 	struct sock_filter     	insns[0];
 };
@@ -153,6 +155,80 @@ extern unsigned int sk_run_filter(const struct sk_buff *skb,
 extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
 extern int sk_detach_filter(struct sock *sk);
 extern int sk_chk_filter(struct sock_filter *filter, int flen);
+
+#ifdef CONFIG_BPF_JIT
+extern void bpf_jit_compile(struct sk_filter *fp);
+extern void bpf_jit_free(struct sk_filter *fp);
+#define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns)
+#else
+static inline void bpf_jit_compile(struct sk_filter *fp)
+{
+}
+static inline void bpf_jit_free(struct sk_filter *fp)
+{
+}
+#define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns)
+#endif
+
+enum {
+	BPF_S_RET_K = 1,
+	BPF_S_RET_A,
+	BPF_S_ALU_ADD_K,
+	BPF_S_ALU_ADD_X,
+	BPF_S_ALU_SUB_K,
+	BPF_S_ALU_SUB_X,
+	BPF_S_ALU_MUL_K,
+	BPF_S_ALU_MUL_X,
+	BPF_S_ALU_DIV_X,
+	BPF_S_ALU_AND_K,
+	BPF_S_ALU_AND_X,
+	BPF_S_ALU_OR_K,
+	BPF_S_ALU_OR_X,
+	BPF_S_ALU_LSH_K,
+	BPF_S_ALU_LSH_X,
+	BPF_S_ALU_RSH_K,
+	BPF_S_ALU_RSH_X,
+	BPF_S_ALU_NEG,
+	BPF_S_LD_W_ABS,
+	BPF_S_LD_H_ABS,
+	BPF_S_LD_B_ABS,
+	BPF_S_LD_W_LEN,
+	BPF_S_LD_W_IND,
+	BPF_S_LD_H_IND,
+	BPF_S_LD_B_IND,
+	BPF_S_LD_IMM,
+	BPF_S_LDX_W_LEN,
+	BPF_S_LDX_B_MSH,
+	BPF_S_LDX_IMM,
+	BPF_S_MISC_TAX,
+	BPF_S_MISC_TXA,
+	BPF_S_ALU_DIV_K,
+	BPF_S_LD_MEM,
+	BPF_S_LDX_MEM,
+	BPF_S_ST,
+	BPF_S_STX,
+	BPF_S_JMP_JA,
+	BPF_S_JMP_JEQ_K,
+	BPF_S_JMP_JEQ_X,
+	BPF_S_JMP_JGE_K,
+	BPF_S_JMP_JGE_X,
+	BPF_S_JMP_JGT_K,
+	BPF_S_JMP_JGT_X,
+	BPF_S_JMP_JSET_K,
+	BPF_S_JMP_JSET_X,
+	/* Ancillary data */
+	BPF_S_ANC_PROTOCOL,
+	BPF_S_ANC_PKTTYPE,
+	BPF_S_ANC_IFINDEX,
+	BPF_S_ANC_NLATTR,
+	BPF_S_ANC_NLATTR_NEST,
+	BPF_S_ANC_MARK,
+	BPF_S_ANC_QUEUE,
+	BPF_S_ANC_HATYPE,
+	BPF_S_ANC_RXHASH,
+	BPF_S_ANC_CPU,
+};
+
 #endif /* __KERNEL__ */
 
 #endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index cb8178ab3c52..364bcf212f71 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2514,6 +2514,7 @@ extern struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev,
 extern int		netdev_max_backlog;
 extern int		netdev_tstamp_prequeue;
 extern int		weight_p;
+extern int		bpf_jit_enable;
 extern int		netdev_set_master(struct net_device *dev, struct net_device *master);
 extern int netdev_set_bond_master(struct net_device *dev,
 				  struct net_device *master);
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index d0ae90af0b40..79aafbbf430a 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -391,8 +391,8 @@ struct sk_buff {
 
 	__u32			rxhash;
 
+	__u16			queue_mapping;
 	kmemcheck_bitfield_begin(flags2);
-	__u16			queue_mapping:16;
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	__u8			ndisc_nodetype:2;
 #endif
diff --git a/net/Kconfig b/net/Kconfig
index 79cabf1ee68b..745fb02d2fda 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -232,6 +232,19 @@ config XPS
 	depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS
 	default y
 
+config HAVE_BPF_JIT
+	bool
+
+config BPF_JIT
+	bool "enable BPF Just In Time compiler"
+	depends on HAVE_BPF_JIT
+	---help---
+	  Berkeley Packet Filter filtering capabilities are normally handled
+	  by an interpreter. This option allows kernel to generate a native
+	  code when filter is loaded in memory. This should speedup
+	  packet sniffing (libpcap/tcpdump). Note : Admin should enable
+	  this feature changing /proc/sys/net/core/bpf_jit_enable
+
 menu "Network testing"
 
 config NET_PKTGEN
diff --git a/net/core/filter.c b/net/core/filter.c
index afb8afb066bb..0eb8c4466eaa 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -39,65 +39,6 @@
 #include <linux/filter.h>
 #include <linux/reciprocal_div.h>
 
-enum {
-	BPF_S_RET_K = 1,
-	BPF_S_RET_A,
-	BPF_S_ALU_ADD_K,
-	BPF_S_ALU_ADD_X,
-	BPF_S_ALU_SUB_K,
-	BPF_S_ALU_SUB_X,
-	BPF_S_ALU_MUL_K,
-	BPF_S_ALU_MUL_X,
-	BPF_S_ALU_DIV_X,
-	BPF_S_ALU_AND_K,
-	BPF_S_ALU_AND_X,
-	BPF_S_ALU_OR_K,
-	BPF_S_ALU_OR_X,
-	BPF_S_ALU_LSH_K,
-	BPF_S_ALU_LSH_X,
-	BPF_S_ALU_RSH_K,
-	BPF_S_ALU_RSH_X,
-	BPF_S_ALU_NEG,
-	BPF_S_LD_W_ABS,
-	BPF_S_LD_H_ABS,
-	BPF_S_LD_B_ABS,
-	BPF_S_LD_W_LEN,
-	BPF_S_LD_W_IND,
-	BPF_S_LD_H_IND,
-	BPF_S_LD_B_IND,
-	BPF_S_LD_IMM,
-	BPF_S_LDX_W_LEN,
-	BPF_S_LDX_B_MSH,
-	BPF_S_LDX_IMM,
-	BPF_S_MISC_TAX,
-	BPF_S_MISC_TXA,
-	BPF_S_ALU_DIV_K,
-	BPF_S_LD_MEM,
-	BPF_S_LDX_MEM,
-	BPF_S_ST,
-	BPF_S_STX,
-	BPF_S_JMP_JA,
-	BPF_S_JMP_JEQ_K,
-	BPF_S_JMP_JEQ_X,
-	BPF_S_JMP_JGE_K,
-	BPF_S_JMP_JGE_X,
-	BPF_S_JMP_JGT_K,
-	BPF_S_JMP_JGT_X,
-	BPF_S_JMP_JSET_K,
-	BPF_S_JMP_JSET_X,
-	/* Ancillary data */
-	BPF_S_ANC_PROTOCOL,
-	BPF_S_ANC_PKTTYPE,
-	BPF_S_ANC_IFINDEX,
-	BPF_S_ANC_NLATTR,
-	BPF_S_ANC_NLATTR_NEST,
-	BPF_S_ANC_MARK,
-	BPF_S_ANC_QUEUE,
-	BPF_S_ANC_HATYPE,
-	BPF_S_ANC_RXHASH,
-	BPF_S_ANC_CPU,
-};
-
 /* No hurry in this branch */
 static void *__load_pointer(const struct sk_buff *skb, int k, unsigned int size)
 {
@@ -145,7 +86,7 @@ int sk_filter(struct sock *sk, struct sk_buff *skb)
 	rcu_read_lock();
 	filter = rcu_dereference(sk->sk_filter);
 	if (filter) {
-		unsigned int pkt_len = sk_run_filter(skb, filter->insns);
+		unsigned int pkt_len = SK_RUN_FILTER(filter, skb);
 
 		err = pkt_len ? pskb_trim(skb, pkt_len) : -EPERM;
 	}
@@ -638,6 +579,7 @@ void sk_filter_release_rcu(struct rcu_head *rcu)
 {
 	struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
 
+	bpf_jit_free(fp);
 	kfree(fp);
 }
 EXPORT_SYMBOL(sk_filter_release_rcu);
@@ -672,6 +614,7 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 
 	atomic_set(&fp->refcnt, 1);
 	fp->len = fprog->len;
+	fp->bpf_func = sk_run_filter;
 
 	err = sk_chk_filter(fp->insns, fp->len);
 	if (err) {
@@ -679,6 +622,8 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 		return err;
 	}
 
+	bpf_jit_compile(fp);
+
 	old_fp = rcu_dereference_protected(sk->sk_filter,
 					   sock_owned_by_user(sk));
 	rcu_assign_pointer(sk->sk_filter, fp);
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 385b6095fdc4..a829e3f60aeb 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -122,6 +122,15 @@ static struct ctl_table net_core_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
+#ifdef CONFIG_BPF_JIT
+	{
+		.procname	= "bpf_jit_enable",
+		.data		= &bpf_jit_enable,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec
+	},
+#endif
 	{
 		.procname	= "netdev_tstamp_prequeue",
 		.data		= &netdev_tstamp_prequeue,
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index b5362e96022b..549527bca87a 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -538,7 +538,7 @@ static inline unsigned int run_filter(const struct sk_buff *skb,
 	rcu_read_lock();
 	filter = rcu_dereference(sk->sk_filter);
 	if (filter != NULL)
-		res = sk_run_filter(skb, filter->insns);
+		res = SK_RUN_FILTER(filter, skb);
 	rcu_read_unlock();
 
 	return res;
-- 
cgit v1.2.3-58-ga151


From 1742f183fc218798dab6fcf0ded25b6608fc0a48 Mon Sep 17 00:00:00 2001
From: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Date: Fri, 22 Apr 2011 06:31:16 +0000
Subject: net: fix netdev_increment_features()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Simplify and fix netdev_increment_features() to conform to what is
stated in netdevice.h comments about NETIF_F_ONE_FOR_ALL.
Include FCoE segmentation and VLAN-challedged flags in computation.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h |  7 ++++++-
 net/core/dev.c            | 35 +++++++++++------------------------
 2 files changed, 17 insertions(+), 25 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 364bcf212f71..b7d0304762aa 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1106,7 +1106,12 @@ struct net_device {
 	 */
 #define NETIF_F_ONE_FOR_ALL	(NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \
 				 NETIF_F_SG | NETIF_F_HIGHDMA |		\
-				 NETIF_F_FRAGLIST)
+				 NETIF_F_FRAGLIST | NETIF_F_VLAN_CHALLENGED)
+	/*
+	 * If one device doesn't support one of these features, then disable it
+	 * for all in netdev_increment_features.
+	 */
+#define NETIF_F_ALL_FOR_ALL	(NETIF_F_NOCACHE_COPY | NETIF_F_FSO)
 
 	/* changeable features with no special hardware requirements */
 #define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO | NETIF_F_GRO)
diff --git a/net/core/dev.c b/net/core/dev.c
index 3bbb4c2ce92e..7db99b52679f 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6164,33 +6164,20 @@ static int dev_cpu_callback(struct notifier_block *nfb,
  */
 u32 netdev_increment_features(u32 all, u32 one, u32 mask)
 {
-	/* If device needs checksumming, downgrade to it. */
-	if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM))
-		all ^= NETIF_F_NO_CSUM | (one & NETIF_F_ALL_CSUM);
-	else if (mask & NETIF_F_ALL_CSUM) {
-		/* If one device supports v4/v6 checksumming, set for all. */
-		if (one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM) &&
-		    !(all & NETIF_F_GEN_CSUM)) {
-			all &= ~NETIF_F_ALL_CSUM;
-			all |= one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-		}
-
-		/* If one device supports hw checksumming, set for all. */
-		if (one & NETIF_F_GEN_CSUM && !(all & NETIF_F_GEN_CSUM)) {
-			all &= ~NETIF_F_ALL_CSUM;
-			all |= NETIF_F_HW_CSUM;
-		}
-	}
+	if (mask & NETIF_F_GEN_CSUM)
+		mask |= NETIF_F_ALL_CSUM;
+	mask |= NETIF_F_VLAN_CHALLENGED;
 
-	/* If device can't no cache copy, don't do for all */
-	if (!(one & NETIF_F_NOCACHE_COPY))
-		all &= ~NETIF_F_NOCACHE_COPY;
+	all |= one & (NETIF_F_ONE_FOR_ALL|NETIF_F_ALL_CSUM) & mask;
+	all &= one | ~NETIF_F_ALL_FOR_ALL;
 
-	one |= NETIF_F_ALL_CSUM;
+	/* If device needs checksumming, downgrade to it. */
+	if (all & (NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM))
+		all &= ~NETIF_F_NO_CSUM;
 
-	one |= all & NETIF_F_ONE_FOR_ALL;
-	all &= one | NETIF_F_LLTX | NETIF_F_GSO | NETIF_F_UFO;
-	all |= one & mask & NETIF_F_ONE_FOR_ALL;
+	/* If one device supports hw checksumming, set for all. */
+	if (all & NETIF_F_GEN_CSUM)
+		all &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_GEN_CSUM);
 
 	return all;
 }
-- 
cgit v1.2.3-58-ga151


From fa2bd7ff9247f4218dfc907db14d000cd7edd862 Mon Sep 17 00:00:00 2001
From: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Date: Fri, 22 Apr 2011 06:31:16 +0000
Subject: net: allow user to change NETIF_F_HIGHDMA
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

NETIF_F_HIGHDMA is like any other TX offloads, so allow user to toggle it.
This is needed later for bridge and bonding convertsion to hw_features.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b7d0304762aa..e03af35843bc 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1080,7 +1080,7 @@ struct net_device {
 
 	/* Features valid for ethtool to change */
 	/* = all defined minus driver/device-class-related */
-#define NETIF_F_NEVER_CHANGE	(NETIF_F_HIGHDMA | NETIF_F_VLAN_CHALLENGED | \
+#define NETIF_F_NEVER_CHANGE	(NETIF_F_VLAN_CHALLENGED | \
 				  NETIF_F_LLTX | NETIF_F_NETNS_LOCAL)
 #define NETIF_F_ETHTOOL_BITS	(0x7f3fffff & ~NETIF_F_NEVER_CHANGE)
 
@@ -1098,6 +1098,7 @@ struct net_device {
 
 #define NETIF_F_ALL_TX_OFFLOADS	(NETIF_F_ALL_CSUM | NETIF_F_SG | \
 				 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
+				 NETIF_F_HIGHDMA | \
 				 NETIF_F_SCTP_CSUM | NETIF_F_FCOE_CRC)
 
 	/*
-- 
cgit v1.2.3-58-ga151


From 36504605432996590f889e33d47e2d9c581f7569 Mon Sep 17 00:00:00 2001
From: David Decotigny <decot@google.com>
Date: Wed, 27 Apr 2011 18:32:37 +0000
Subject: ethtool: cosmetics: enforce const-ness in ethtool_cmd_speed

The 'ep' argument of ethtool_cmd_speed is not altered: advertise it in
protoype. +Indentation fix. Also add comments to advise using the
ethtool_cmd_speed API to get/set the link speed.

Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/ethtool.h | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 9de31274341d..7e6e0a89ca26 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -24,7 +24,10 @@ struct ethtool_cmd {
 	__u32	cmd;
 	__u32	supported;	/* Features this interface supports */
 	__u32	advertising;	/* Features this interface advertises */
-	__u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */
+	__u16	speed;	        /* The forced speed (lower bits) in
+				 * Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
 	__u8	duplex;		/* Duplex, half or full */
 	__u8	port;		/* Which connector port */
 	__u8	phy_address;
@@ -33,7 +36,10 @@ struct ethtool_cmd {
 	__u8	mdio_support;
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u16	speed_hi;
+	__u16	speed_hi;       /* The forced speed (upper
+				 * bits) in Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
 	__u8	eth_tp_mdix;
 	__u8	reserved2;
 	__u32	lp_advertising;	/* Features the link partner advertises */
@@ -41,14 +47,14 @@ struct ethtool_cmd {
 };
 
 static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
-						__u32 speed)
+					 __u32 speed)
 {
 
 	ep->speed = (__u16)speed;
 	ep->speed_hi = (__u16)(speed >> 16);
 }
 
-static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
 {
 	return (ep->speed_hi << 16) | ep->speed;
 }
-- 
cgit v1.2.3-58-ga151


From 8ae6daca85c8bbd6a32c382db5e2a2a989f8bed2 Mon Sep 17 00:00:00 2001
From: David Decotigny <decot@google.com>
Date: Wed, 27 Apr 2011 18:32:38 +0000
Subject: ethtool: Call ethtool's get/set_settings callbacks with cleaned data

This makes sure that when a driver calls the ethtool's
get/set_settings() callback of another driver, the data passed to it
is clean. This guarantees that speed_hi will be zeroed correctly if
the called callback doesn't explicitely set it: we are sure we don't
get a corrupted speed from the underlying driver. We also take care of
setting the cmd field appropriately (ETHTOOL_GSET/SSET).

This applies to dev_ethtool_get_settings(), which now makes sure it
sets up that ethtool command parameter correctly before passing it to
drivers. This also means that whoever calls dev_ethtool_get_settings()
does not have to clean the ethtool command parameter. This function
also becomes an exported symbol instead of an inline.

All drivers visible to make allyesconfig under x86_64 have been
updated.

Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/mips/txx9/generic/setup_tx4939.c | 21 ++++++++-------------
 drivers/net/e100.c                    |  2 +-
 drivers/net/mdio.c                    |  3 +++
 drivers/net/mii.c                     |  3 +++
 drivers/net/pch_gbe/pch_gbe_main.c    |  6 +++---
 drivers/net/pch_gbe/pch_gbe_phy.c     |  2 +-
 drivers/net/pcnet32.c                 | 16 ++++++++--------
 drivers/net/sfc/mdio_10g.c            |  4 ++--
 drivers/net/stmmac/stmmac_ethtool.c   |  5 ++---
 drivers/net/usb/asix.c                | 28 +++++++++++++++-------------
 drivers/net/usb/dm9601.c              |  6 +++---
 drivers/net/usb/smsc75xx.c            |  7 ++++---
 drivers/net/usb/smsc95xx.c            |  7 ++++---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c     | 11 +++++++----
 drivers/scsi/fcoe/fcoe.c              | 11 +++++++----
 include/linux/ethtool.h               |  4 +++-
 include/linux/netdevice.h             |  9 ++-------
 include/rdma/ib_addr.h                | 13 +++++++------
 net/core/dev.c                        | 24 ++++++++++++++++++++++++
 net/core/net-sysfs.c                  | 24 ++++++++++--------------
 20 files changed, 117 insertions(+), 89 deletions(-)

(limited to 'include/linux')

diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 3dc19f482959..e9f95dcde379 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -318,19 +318,15 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
 }
 
 #if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
-static int tx4939_get_eth_speed(struct net_device *dev)
+static u32 tx4939_get_eth_speed(struct net_device *dev)
 {
-	struct ethtool_cmd cmd = { ETHTOOL_GSET };
-	int speed = 100;	/* default 100Mbps */
-	int err;
-	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
-		return speed;
-	err = dev->ethtool_ops->get_settings(dev, &cmd);
-	if (err < 0)
-		return speed;
-	speed = cmd.speed == SPEED_100 ? 100 : 10;
-	return speed;
+	struct ethtool_cmd cmd;
+	if (dev_ethtool_get_settings(dev, &cmd))
+		return 100;	/* default 100Mbps */
+
+	return ethtool_cmd_speed(&cmd);
 }
+
 static int tx4939_netdev_event(struct notifier_block *this,
 			       unsigned long event,
 			       void *ptr)
@@ -343,8 +339,7 @@ static int tx4939_netdev_event(struct notifier_block *this,
 		else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1))
 			bit = TX4939_PCFG_SPEED1;
 		if (bit) {
-			int speed = tx4939_get_eth_speed(dev);
-			if (speed == 100)
+			if (tx4939_get_eth_speed(dev) == 100)
 				txx9_set64(&tx4939_ccfgptr->pcfg, bit);
 			else
 				txx9_clear64(&tx4939_ccfgptr->pcfg, bit);
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index b0aa9e68990a..66ba596a4d37 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1668,7 +1668,7 @@ static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
 static void e100_watchdog(unsigned long data)
 {
 	struct nic *nic = (struct nic *)data;
-	struct ethtool_cmd cmd;
+	struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
 
 	netif_printk(nic, timer, KERN_DEBUG, nic->netdev,
 		     "right now = %ld\n", jiffies);
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index e85bf04cf813..f2d10abd0403 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -176,6 +176,9 @@ static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr)
  * @npage_adv: Modes currently advertised on next pages
  * @npage_lpa: Modes advertised by link partner on next pages
  *
+ * The @ecmd parameter is expected to have been cleared before calling
+ * mdio45_ethtool_gset_npage().
+ *
  * Since the CSRs for auto-negotiation using next pages are not fully
  * standardised, this function does not attempt to decode them.  The
  * caller must pass them in.
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index 0a6c6a2e7550..05acca78f63a 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -58,6 +58,9 @@ static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
  * @mii: MII interface
  * @ecmd: requested ethtool_cmd
  *
+ * The @ecmd parameter is expected to have been cleared before calling
+ * mii_ethtool_gset().
+ *
  * Returns 0 for success, negative on error.
  */
 int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 4cc9872f5ec4..f3e4b0adae93 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -888,12 +888,12 @@ static void pch_gbe_watchdog(unsigned long data)
 	struct pch_gbe_adapter *adapter = (struct pch_gbe_adapter *)data;
 	struct net_device *netdev = adapter->netdev;
 	struct pch_gbe_hw *hw = &adapter->hw;
-	struct ethtool_cmd cmd;
 
 	pr_debug("right now = %ld\n", jiffies);
 
 	pch_gbe_update_stats(adapter);
 	if ((mii_link_ok(&adapter->mii)) && (!netif_carrier_ok(netdev))) {
+		struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
 		netdev->tx_queue_len = adapter->tx_queue_len;
 		/* mii library handles link maintenance tasks */
 		if (mii_ethtool_gset(&adapter->mii, &cmd)) {
@@ -903,7 +903,7 @@ static void pch_gbe_watchdog(unsigned long data)
 						PCH_GBE_WATCHDOG_PERIOD));
 			return;
 		}
-		hw->mac.link_speed = cmd.speed;
+		hw->mac.link_speed = ethtool_cmd_speed(&cmd);
 		hw->mac.link_duplex = cmd.duplex;
 		/* Set the RGMII control. */
 		pch_gbe_set_rgmii_ctrl(adapter, hw->mac.link_speed,
@@ -913,7 +913,7 @@ static void pch_gbe_watchdog(unsigned long data)
 				 hw->mac.link_duplex);
 		netdev_dbg(netdev,
 			   "Link is Up %d Mbps %s-Duplex\n",
-			   cmd.speed,
+			   hw->mac.link_speed,
 			   cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
 		netif_carrier_on(netdev);
 		netif_wake_queue(netdev);
diff --git a/drivers/net/pch_gbe/pch_gbe_phy.c b/drivers/net/pch_gbe/pch_gbe_phy.c
index 923a687acd30..9a8207f686fd 100644
--- a/drivers/net/pch_gbe/pch_gbe_phy.c
+++ b/drivers/net/pch_gbe/pch_gbe_phy.c
@@ -247,7 +247,7 @@ inline void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
 void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
 {
 	struct pch_gbe_adapter *adapter;
-	struct ethtool_cmd     cmd;
+	struct ethtool_cmd     cmd = { .cmd = ETHTOOL_GSET };
 	int ret;
 	u16 mii_reg;
 
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 0a1efbae1bc0..b48aba9e4227 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -2099,7 +2099,7 @@ static int pcnet32_open(struct net_device *dev)
 		int first_phy = -1;
 		u16 bmcr;
 		u32 bcr9;
-		struct ethtool_cmd ecmd;
+		struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 
 		/*
 		 * There is really no good other way to handle multiple PHYs
@@ -2115,9 +2115,9 @@ static int pcnet32_open(struct net_device *dev)
 			ecmd.port = PORT_MII;
 			ecmd.transceiver = XCVR_INTERNAL;
 			ecmd.autoneg = AUTONEG_DISABLE;
-			ecmd.speed =
-			    lp->
-			    options & PCNET32_PORT_100 ? SPEED_100 : SPEED_10;
+			ethtool_cmd_speed_set(&ecmd,
+					      (lp->options & PCNET32_PORT_100) ?
+					      SPEED_100 : SPEED_10);
 			bcr9 = lp->a.read_bcr(ioaddr, 9);
 
 			if (lp->options & PCNET32_PORT_FD) {
@@ -2763,11 +2763,11 @@ static void pcnet32_check_media(struct net_device *dev, int verbose)
 		netif_carrier_on(dev);
 		if (lp->mii) {
 			if (netif_msg_link(lp)) {
-				struct ethtool_cmd ecmd;
+				struct ethtool_cmd ecmd = {
+					.cmd = ETHTOOL_GSET };
 				mii_ethtool_gset(&lp->mii_if, &ecmd);
-				netdev_info(dev, "link up, %sMbps, %s-duplex\n",
-					    (ecmd.speed == SPEED_100)
-					    ? "100" : "10",
+				netdev_info(dev, "link up, %uMbps, %s-duplex\n",
+					    ethtool_cmd_speed(&ecmd),
 					    (ecmd.duplex == DUPLEX_FULL)
 					    ? "full" : "half");
 			}
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 19e68c26d103..71159145b4bf 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -232,12 +232,12 @@ void efx_mdio_set_mmds_lpower(struct efx_nic *efx,
  */
 int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	struct ethtool_cmd prev;
+	struct ethtool_cmd prev = { .cmd = ETHTOOL_GSET };
 
 	efx->phy_op->get_settings(efx, &prev);
 
 	if (ecmd->advertising == prev.advertising &&
-	    ecmd->speed == prev.speed &&
+	    ethtool_cmd_speed(ecmd) == ethtool_cmd_speed(&prev) &&
 	    ecmd->duplex == prev.duplex &&
 	    ecmd->port == prev.port &&
 	    ecmd->autoneg == prev.autoneg)
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index 0e61ac8707cb..6f5aaeb986ff 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -237,13 +237,12 @@ stmmac_set_pauseparam(struct net_device *netdev,
 
 	if (phy->autoneg) {
 		if (netif_running(netdev)) {
-			struct ethtool_cmd cmd;
+			struct ethtool_cmd cmd = { .cmd = ETHTOOL_SSET };
 			/* auto-negotiation automatically restarted */
-			cmd.cmd = ETHTOOL_NWAY_RST;
 			cmd.supported = phy->supported;
 			cmd.advertising = phy->advertising;
 			cmd.autoneg = phy->autoneg;
-			cmd.speed = phy->speed;
+			ethtool_cmd_speed_set(&cmd, phy->speed);
 			cmd.duplex = phy->duplex;
 			cmd.phy_address = phy->addr;
 			ret = phy_ethtool_sset(phy, &cmd);
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 6140b56cce53..6998aa6b7bb7 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -847,7 +847,7 @@ static void ax88172_set_multicast(struct net_device *net)
 static int ax88172_link_reset(struct usbnet *dev)
 {
 	u8 mode;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
@@ -856,8 +856,8 @@ static int ax88172_link_reset(struct usbnet *dev)
 	if (ecmd.duplex != DUPLEX_FULL)
 		mode |= ~AX88172_MEDIUM_FD;
 
-	netdev_dbg(dev->net, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
-		   ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
@@ -947,20 +947,20 @@ static const struct ethtool_ops ax88772_ethtool_ops = {
 static int ax88772_link_reset(struct usbnet *dev)
 {
 	u16 mode;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
 	mode = AX88772_MEDIUM_DEFAULT;
 
-	if (ecmd.speed != SPEED_100)
+	if (ethtool_cmd_speed(&ecmd) != SPEED_100)
 		mode &= ~AX_MEDIUM_PS;
 
 	if (ecmd.duplex != DUPLEX_FULL)
 		mode &= ~AX_MEDIUM_FD;
 
-	netdev_dbg(dev->net, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
-		   ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
@@ -1173,18 +1173,20 @@ static int marvell_led_status(struct usbnet *dev, u16 speed)
 static int ax88178_link_reset(struct usbnet *dev)
 {
 	u16 mode;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 	struct asix_data *data = (struct asix_data *)&dev->data;
+	u32 speed;
 
 	netdev_dbg(dev->net, "ax88178_link_reset()\n");
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
 	mode = AX88178_MEDIUM_DEFAULT;
+	speed = ethtool_cmd_speed(&ecmd);
 
-	if (ecmd.speed == SPEED_1000)
+	if (speed == SPEED_1000)
 		mode |= AX_MEDIUM_GM;
-	else if (ecmd.speed == SPEED_100)
+	else if (speed == SPEED_100)
 		mode |= AX_MEDIUM_PS;
 	else
 		mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
@@ -1196,13 +1198,13 @@ static int ax88178_link_reset(struct usbnet *dev)
 	else
 		mode &= ~AX_MEDIUM_FD;
 
-	netdev_dbg(dev->net, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
-		   ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   speed, ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
 	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
-		marvell_led_status(dev, ecmd.speed);
+		marvell_led_status(dev, speed);
 
 	return 0;
 }
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 5002f5be47be..1d93133e9b74 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -599,13 +599,13 @@ static void dm9601_status(struct usbnet *dev, struct urb *urb)
 
 static int dm9601_link_reset(struct usbnet *dev)
 {
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
 
-	netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
-		   ecmd.speed, ecmd.duplex);
+	netdev_dbg(dev->net, "link_reset() speed: %u duplex: %d\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex);
 
 	return 0;
 }
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 860a20c938b4..15b3d6888ae9 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -503,7 +503,7 @@ static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
 static int smsc75xx_link_reset(struct usbnet *dev)
 {
 	struct mii_if_info *mii = &dev->mii;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 	u16 lcladv, rmtadv;
 	int ret;
 
@@ -519,8 +519,9 @@ static int smsc75xx_link_reset(struct usbnet *dev)
 	lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
 	rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
 
-	netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x"
-		" rmtadv: %04x", ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+	netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x"
+		  " rmtadv: %04x", ethtool_cmd_speed(&ecmd),
+		  ecmd.duplex, lcladv, rmtadv);
 
 	return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
 }
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 24f4b3739dd2..b374a9997908 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -457,7 +457,7 @@ static int smsc95xx_link_reset(struct usbnet *dev)
 {
 	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	struct mii_if_info *mii = &dev->mii;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 	unsigned long flags;
 	u16 lcladv, rmtadv;
 	u32 intdata;
@@ -472,8 +472,9 @@ static int smsc95xx_link_reset(struct usbnet *dev)
 	lcladv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
 	rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
 
-	netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x rmtadv: %04x\n",
-		  ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+	netif_dbg(dev, link, dev->net,
+		  "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
+		  ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
 
 	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
 	if (ecmd.duplex != DUPLEX_FULL) {
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index e2e647509a73..cd050196a163 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -664,7 +664,7 @@ static void bnx2fc_link_speed_update(struct fc_lport *lport)
 	struct fcoe_port *port = lport_priv(lport);
 	struct bnx2fc_hba *hba = port->priv;
 	struct net_device *netdev = hba->netdev;
-	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+	struct ethtool_cmd ecmd;
 
 	if (!dev_ethtool_get_settings(netdev, &ecmd)) {
 		lport->link_supported_speeds &=
@@ -675,12 +675,15 @@ static void bnx2fc_link_speed_update(struct fc_lport *lport)
 		if (ecmd.supported & SUPPORTED_10000baseT_Full)
 			lport->link_supported_speeds |= FC_PORTSPEED_10GBIT;
 
-		if (ecmd.speed == SPEED_1000)
+		switch (ethtool_cmd_speed(&ecmd)) {
+		case SPEED_1000:
 			lport->link_speed = FC_PORTSPEED_1GBIT;
-		if (ecmd.speed == SPEED_10000)
+			break;
+		case SPEED_10000:
 			lport->link_speed = FC_PORTSPEED_10GBIT;
+			break;
+		}
 	}
-	return;
 }
 static int bnx2fc_link_ok(struct fc_lport *lport)
 {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index bde6ee5333eb..04f346b562da 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2026,7 +2026,7 @@ out_nodev:
 int fcoe_link_speed_update(struct fc_lport *lport)
 {
 	struct net_device *netdev = fcoe_netdev(lport);
-	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+	struct ethtool_cmd ecmd;
 
 	if (!dev_ethtool_get_settings(netdev, &ecmd)) {
 		lport->link_supported_speeds &=
@@ -2037,11 +2037,14 @@ int fcoe_link_speed_update(struct fc_lport *lport)
 		if (ecmd.supported & SUPPORTED_10000baseT_Full)
 			lport->link_supported_speeds |=
 				FC_PORTSPEED_10GBIT;
-		if (ecmd.speed == SPEED_1000)
+		switch (ethtool_cmd_speed(&ecmd)) {
+		case SPEED_1000:
 			lport->link_speed = FC_PORTSPEED_1GBIT;
-		if (ecmd.speed == SPEED_10000)
+			break;
+		case SPEED_10000:
 			lport->link_speed = FC_PORTSPEED_10GBIT;
-
+			break;
+		}
 		return 0;
 	}
 	return -1;
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 7e6e0a89ca26..4194a2067a14 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -744,7 +744,9 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
 /**
  * struct ethtool_ops - optional netdev operations
  * @get_settings: Get various device settings including Ethernet link
- *	settings.  Returns a negative error code or zero.
+ *	settings. The @cmd parameter is expected to have been cleared
+ *	before get_settings is called. Returns a negative error code or
+ *	zero.
  * @set_settings: Set various device settings including Ethernet link
  *	settings.  Returns a negative error code or zero.
  * @get_drvinfo: Report driver/device information.  Should only set the
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index e03af35843bc..d5de66af46f9 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2597,13 +2597,8 @@ static inline int netif_is_bond_slave(struct net_device *dev)
 
 extern struct pernet_operations __net_initdata loopback_net_ops;
 
-static inline int dev_ethtool_get_settings(struct net_device *dev,
-					   struct ethtool_cmd *cmd)
-{
-	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
-		return -EOPNOTSUPP;
-	return dev->ethtool_ops->get_settings(dev, cmd);
-}
+int dev_ethtool_get_settings(struct net_device *dev,
+			     struct ethtool_cmd *cmd);
 
 static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
 {
diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h
index b5fc9f39122b..ae8c68f30f1b 100644
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -217,18 +217,19 @@ static inline enum ib_mtu iboe_get_mtu(int mtu)
 static inline int iboe_get_rate(struct net_device *dev)
 {
 	struct ethtool_cmd cmd;
+	u32 speed;
 
-	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings ||
-	    dev->ethtool_ops->get_settings(dev, &cmd))
+	if (dev_ethtool_get_settings(dev, &cmd))
 		return IB_RATE_PORT_CURRENT;
 
-	if (cmd.speed >= 40000)
+	speed = ethtool_cmd_speed(&cmd);
+	if (speed >= 40000)
 		return IB_RATE_40_GBPS;
-	else if (cmd.speed >= 30000)
+	else if (speed >= 30000)
 		return IB_RATE_30_GBPS;
-	else if (cmd.speed >= 20000)
+	else if (speed >= 20000)
 		return IB_RATE_20_GBPS;
-	else if (cmd.speed >= 10000)
+	else if (speed >= 10000)
 		return IB_RATE_10_GBPS;
 	else
 		return IB_RATE_PORT_CURRENT;
diff --git a/net/core/dev.c b/net/core/dev.c
index 7db99b52679f..e95dc30110eb 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4495,6 +4495,30 @@ void dev_set_rx_mode(struct net_device *dev)
 	netif_addr_unlock_bh(dev);
 }
 
+/**
+ *	dev_ethtool_get_settings - call device's ethtool_ops::get_settings()
+ *	@dev: device
+ *	@cmd: memory area for ethtool_ops::get_settings() result
+ *
+ *      The cmd arg is initialized properly (cleared and
+ *      ethtool_cmd::cmd field set to ETHTOOL_GSET).
+ *
+ *	Return device's ethtool_ops::get_settings() result value or
+ *	-EOPNOTSUPP when device doesn't expose
+ *	ethtool_ops::get_settings() operation.
+ */
+int dev_ethtool_get_settings(struct net_device *dev,
+			     struct ethtool_cmd *cmd)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+		return -EOPNOTSUPP;
+
+	memset(cmd, 0, sizeof(struct ethtool_cmd));
+	cmd->cmd = ETHTOOL_GSET;
+	return dev->ethtool_ops->get_settings(dev, cmd);
+}
+EXPORT_SYMBOL(dev_ethtool_get_settings);
+
 /**
  *	dev_get_flags - get flags reported to userspace
  *	@dev: device
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 5ceb257e860c..381813eae46c 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -28,6 +28,7 @@
 static const char fmt_hex[] = "%#x\n";
 static const char fmt_long_hex[] = "%#lx\n";
 static const char fmt_dec[] = "%d\n";
+static const char fmt_udec[] = "%u\n";
 static const char fmt_ulong[] = "%lu\n";
 static const char fmt_u64[] = "%llu\n";
 
@@ -145,13 +146,10 @@ static ssize_t show_speed(struct device *dev,
 	if (!rtnl_trylock())
 		return restart_syscall();
 
-	if (netif_running(netdev) &&
-	    netdev->ethtool_ops &&
-	    netdev->ethtool_ops->get_settings) {
-		struct ethtool_cmd cmd = { ETHTOOL_GSET };
-
-		if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
-			ret = sprintf(buf, fmt_dec, ethtool_cmd_speed(&cmd));
+	if (netif_running(netdev)) {
+		struct ethtool_cmd cmd;
+		if (!dev_ethtool_get_settings(netdev, &cmd))
+			ret = sprintf(buf, fmt_udec, ethtool_cmd_speed(&cmd));
 	}
 	rtnl_unlock();
 	return ret;
@@ -166,13 +164,11 @@ static ssize_t show_duplex(struct device *dev,
 	if (!rtnl_trylock())
 		return restart_syscall();
 
-	if (netif_running(netdev) &&
-	    netdev->ethtool_ops &&
-	    netdev->ethtool_ops->get_settings) {
-		struct ethtool_cmd cmd = { ETHTOOL_GSET };
-
-		if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
-			ret = sprintf(buf, "%s\n", cmd.duplex ? "full" : "half");
+	if (netif_running(netdev)) {
+		struct ethtool_cmd cmd;
+		if (!dev_ethtool_get_settings(netdev, &cmd))
+			ret = sprintf(buf, "%s\n",
+				      cmd.duplex ? "full" : "half");
 	}
 	rtnl_unlock();
 	return ret;
-- 
cgit v1.2.3-58-ga151


From 57a503c61db077b923e23f36050c02166a4a1db2 Mon Sep 17 00:00:00 2001
From: Viresh KUMAR <viresh.kumar@st.com>
Date: Mon, 2 May 2011 18:36:45 +0000
Subject: net/stmmac: Move "#include <linux/platform_device.h>" to
 linux/stmmac.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

stmmac.h uses struct platform_device and doesn't include
<linux/platform_device.h>. Whereas drivers/net/stmmac/stmmac.h includes it, but
doesn't directly use it. And so we get following compilation warning while using
this file:
	warning: ‘struct platform_device’ declared inside parameter list

This patch includes <linux/platform_device.h> in linux/stmmac.h and removes it
from drivers/net/stmmac/stmmac.h

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/stmmac.h | 1 -
 include/linux/stmmac.h      | 2 ++
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
index 5f06c4706abe..2b076b313622 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/stmmac/stmmac.h
@@ -21,7 +21,6 @@
 *******************************************************************************/
 
 #define DRV_MODULE_VERSION	"Nov_2010"
-#include <linux/platform_device.h>
 #include <linux/stmmac.h>
 
 #include "common.h"
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index f29197a4b227..9529e49b0385 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -26,6 +26,8 @@
 #ifndef __STMMAC_PLATFORM_DATA
 #define __STMMAC_PLATFORM_DATA
 
+#include <linux/platform_device.h>
+
 /* platform data for platform device structure's platform_data field */
 
 /* Private data for the STM on-board ethernet driver */
-- 
cgit v1.2.3-58-ga151


From 9a1b9496cd2b013f74885218947fa7120d53e74c Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 4 May 2011 12:18:54 -0700
Subject: ipv4: Pass explicit saddr/daddr args to ipmr_get_route().

This eliminates the need to use rt->rt_{src,dst}.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/mroute.h |  1 +
 net/ipv4/ipmr.c        | 16 ++++++++--------
 net/ipv4/route.c       |  4 +++-
 3 files changed, 12 insertions(+), 9 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index b21d567692b2..46caaf44339d 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -244,6 +244,7 @@ struct mfc_cache {
 #ifdef __KERNEL__
 struct rtmsg;
 extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
+			  __be32 saddr, __be32 daddr,
 			  struct rtmsg *rtm, int nowait);
 #endif
 
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 86033b7a05ba..30a7763c400e 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -2041,20 +2041,20 @@ rtattr_failure:
 	return -EMSGSIZE;
 }
 
-int ipmr_get_route(struct net *net,
-		   struct sk_buff *skb, struct rtmsg *rtm, int nowait)
+int ipmr_get_route(struct net *net, struct sk_buff *skb,
+		   __be32 saddr, __be32 daddr,
+		   struct rtmsg *rtm, int nowait)
 {
-	int err;
-	struct mr_table *mrt;
 	struct mfc_cache *cache;
-	struct rtable *rt = skb_rtable(skb);
+	struct mr_table *mrt;
+	int err;
 
 	mrt = ipmr_get_table(net, RT_TABLE_DEFAULT);
 	if (mrt == NULL)
 		return -ENOENT;
 
 	rcu_read_lock();
-	cache = ipmr_cache_find(mrt, rt->rt_src, rt->rt_dst);
+	cache = ipmr_cache_find(mrt, saddr, daddr);
 
 	if (cache == NULL) {
 		struct sk_buff *skb2;
@@ -2087,8 +2087,8 @@ int ipmr_get_route(struct net *net,
 		skb_reset_network_header(skb2);
 		iph = ip_hdr(skb2);
 		iph->ihl = sizeof(struct iphdr) >> 2;
-		iph->saddr = rt->rt_src;
-		iph->daddr = rt->rt_dst;
+		iph->saddr = saddr;
+		iph->daddr = daddr;
 		iph->version = 0;
 		err = ipmr_cache_unresolved(mrt, vif, skb2);
 		read_unlock(&mrt_lock);
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 3bc685454b5b..6a83840b16af 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2857,7 +2857,9 @@ static int rt_fill_info(struct net *net,
 
 		if (ipv4_is_multicast(dst) && !ipv4_is_local_multicast(dst) &&
 		    IPV4_DEVCONF_ALL(net, MC_FORWARDING)) {
-			int err = ipmr_get_route(net, skb, r, nowait);
+			int err = ipmr_get_route(net, skb,
+						 rt->rt_src, rt->rt_dst,
+						 r, nowait);
 			if (err <= 0) {
 				if (!nowait) {
 					if (err == 0)
-- 
cgit v1.2.3-58-ga151


From 1650629d1800bf05ad775f974e931ca2fa03b0ff Mon Sep 17 00:00:00 2001
From: Kurt Van Dijck <kurt.van.dijck@eia.be>
Date: Tue, 3 May 2011 18:40:57 +0000
Subject: can: make struct can_proto const

commit 53914b67993c724cec585863755c9ebc8446e83b had the
same message. That commit did put everything in place but
did not make can_proto const itself.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/can/core.h |  4 ++--
 net/can/af_can.c         | 12 ++++++------
 net/can/bcm.c            |  2 +-
 net/can/raw.c            |  2 +-
 4 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/can/core.h b/include/linux/can/core.h
index 6f70a6d3a16e..5ce6b5d62ecc 100644
--- a/include/linux/can/core.h
+++ b/include/linux/can/core.h
@@ -44,8 +44,8 @@ struct can_proto {
 
 /* function prototypes for the CAN networklayer core (af_can.c) */
 
-extern int  can_proto_register(struct can_proto *cp);
-extern void can_proto_unregister(struct can_proto *cp);
+extern int  can_proto_register(const struct can_proto *cp);
+extern void can_proto_unregister(const struct can_proto *cp);
 
 extern int  can_rx_register(struct net_device *dev, canid_t can_id,
 			    canid_t mask,
diff --git a/net/can/af_can.c b/net/can/af_can.c
index a8dcaa49675a..5b52762b9f20 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -84,7 +84,7 @@ static DEFINE_SPINLOCK(can_rcvlists_lock);
 static struct kmem_cache *rcv_cache __read_mostly;
 
 /* table of registered CAN protocols */
-static struct can_proto *proto_tab[CAN_NPROTO] __read_mostly;
+static const struct can_proto *proto_tab[CAN_NPROTO] __read_mostly;
 static DEFINE_MUTEX(proto_tab_lock);
 
 struct timer_list can_stattimer;   /* timer for statistics update */
@@ -115,9 +115,9 @@ static void can_sock_destruct(struct sock *sk)
 	skb_queue_purge(&sk->sk_receive_queue);
 }
 
-static struct can_proto *can_try_module_get(int protocol)
+static const struct can_proto *can_try_module_get(int protocol)
 {
-	struct can_proto *cp;
+	const struct can_proto *cp;
 
 	rcu_read_lock();
 	cp = rcu_dereference(proto_tab[protocol]);
@@ -132,7 +132,7 @@ static int can_create(struct net *net, struct socket *sock, int protocol,
 		      int kern)
 {
 	struct sock *sk;
-	struct can_proto *cp;
+	const struct can_proto *cp;
 	int err = 0;
 
 	sock->state = SS_UNCONNECTED;
@@ -691,7 +691,7 @@ drop:
  *  -EBUSY  protocol already in use
  *  -ENOBUF if proto_register() fails
  */
-int can_proto_register(struct can_proto *cp)
+int can_proto_register(const struct can_proto *cp)
 {
 	int proto = cp->protocol;
 	int err = 0;
@@ -728,7 +728,7 @@ EXPORT_SYMBOL(can_proto_register);
  * can_proto_unregister - unregister CAN transport protocol
  * @cp: pointer to CAN protocol structure
  */
-void can_proto_unregister(struct can_proto *cp)
+void can_proto_unregister(const struct can_proto *cp)
 {
 	int proto = cp->protocol;
 
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 8a6a05e7c3c8..cced806098a9 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -1601,7 +1601,7 @@ static struct proto bcm_proto __read_mostly = {
 	.init       = bcm_init,
 };
 
-static struct can_proto bcm_can_proto __read_mostly = {
+static const struct can_proto bcm_can_proto = {
 	.type       = SOCK_DGRAM,
 	.protocol   = CAN_BCM,
 	.ops        = &bcm_ops,
diff --git a/net/can/raw.c b/net/can/raw.c
index 0eb39a7fdf64..dea99a6e596c 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -774,7 +774,7 @@ static struct proto raw_proto __read_mostly = {
 	.init       = raw_init,
 };
 
-static struct can_proto raw_can_proto __read_mostly = {
+static const struct can_proto raw_can_proto = {
 	.type       = SOCK_RAW,
 	.protocol   = CAN_RAW,
 	.ops        = &raw_ops,
-- 
cgit v1.2.3-58-ga151


From 228e548e602061b08ee8e8966f567c12aa079682 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 2 May 2011 20:21:35 +0000
Subject: net: Add sendmmsg socket system call

This patch adds a multiple message send syscall and is the send
version of the existing recvmmsg syscall. This is heavily
based on the patch by Arnaldo that added recvmmsg.

I wrote a microbenchmark to test the performance gains of using
this new syscall:

http://ozlabs.org/~anton/junkcode/sendmmsg_test.c

The test was run on a ppc64 box with a 10 Gbit network card. The
benchmark can send both UDP and RAW ethernet packets.

64B UDP

batch   pkts/sec
1       804570
2       872800 (+ 8 %)
4       916556 (+14 %)
8       939712 (+17 %)
16      952688 (+18 %)
32      956448 (+19 %)
64      964800 (+20 %)

64B raw socket

batch   pkts/sec
1       1201449
2       1350028 (+12 %)
4       1461416 (+22 %)
8       1513080 (+26 %)
16      1541216 (+28 %)
32      1553440 (+29 %)
64      1557888 (+30 %)

We see a 20% improvement in throughput on UDP send and 30%
on raw socket send.

[ Add sparc syscall entries. -DaveM ]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/powerpc/include/asm/systbl.h  |   1 +
 arch/powerpc/include/asm/unistd.h  |   3 +-
 arch/sparc/include/asm/unistd.h    |   3 +-
 arch/sparc/kernel/systbls_32.S     |   2 +-
 arch/sparc/kernel/systbls_64.S     |   4 +-
 arch/x86/ia32/ia32entry.S          |   1 +
 arch/x86/include/asm/unistd_32.h   |   3 +-
 arch/x86/include/asm/unistd_64.h   |   2 +
 arch/x86/kernel/syscall_table_32.S |   1 +
 include/linux/net.h                |   1 +
 include/linux/socket.h             |   2 +
 include/linux/syscalls.h           |   2 +
 include/net/compat.h               |   2 +
 kernel/sys_ni.c                    |   2 +
 net/compat.c                       |  16 ++-
 net/socket.c                       | 199 +++++++++++++++++++++++++++++--------
 16 files changed, 192 insertions(+), 52 deletions(-)

(limited to 'include/linux')

diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 60f64b132bd4..8489d372077f 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -352,3 +352,4 @@ SYSCALL_SPU(name_to_handle_at)
 COMPAT_SYS_SPU(open_by_handle_at)
 COMPAT_SYS_SPU(clock_adjtime)
 SYSCALL_SPU(syncfs)
+COMPAT_SYS_SPU(sendmmsg)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 3c215648ce6d..6d23c8193caa 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -371,10 +371,11 @@
 #define __NR_open_by_handle_at	346
 #define __NR_clock_adjtime	347
 #define __NR_syncfs		348
+#define __NR_sendmmsg		349
 
 #ifdef __KERNEL__
 
-#define __NR_syscalls		349
+#define __NR_syscalls		350
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 9d897b6db983..c5387ed0add8 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -404,8 +404,9 @@
 #define __NR_open_by_handle_at	333
 #define __NR_clock_adjtime	334
 #define __NR_syncfs		335
+#define __NR_sendmmsg		336
 
-#define NR_syscalls		336
+#define NR_syscalls		337
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 47ac73c32e88..332c83ff7701 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -84,4 +84,4 @@ sys_call_table:
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 /*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-/*335*/	.long sys_syncfs
+/*335*/	.long sys_syncfs, sys_sendmmsg
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 4f3170c1ef47..43887ca0be0e 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -85,7 +85,7 @@ sys_call_table32:
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
 	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
-	.word sys_syncfs
+	.word sys_syncfs, compat_sys_sendmmsg
 
 #endif /* CONFIG_COMPAT */
 
@@ -162,4 +162,4 @@ sys_call_table:
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-	.word sys_syncfs
+	.word sys_syncfs, sys_sendmmsg
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 849a9d23c71d..95f5826be458 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -848,4 +848,5 @@ ia32_sys_call_table:
 	.quad compat_sys_open_by_handle_at
 	.quad compat_sys_clock_adjtime
 	.quad sys_syncfs
+	.quad compat_sys_sendmmsg	/* 345 */
 ia32_syscall_end:
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index a755ef5e5977..fb6a625c99bf 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -350,10 +350,11 @@
 #define __NR_open_by_handle_at  342
 #define __NR_clock_adjtime	343
 #define __NR_syncfs             344
+#define __NR_sendmmsg		345
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 345
+#define NR_syscalls 346
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 160fa76bd578..79f90eb15aad 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -677,6 +677,8 @@ __SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at)
 __SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
 #define __NR_syncfs                             306
 __SYSCALL(__NR_syncfs, sys_syncfs)
+#define __NR_sendmmsg				307
+__SYSCALL(__NR_sendmmsg, sys_sendmmsg)
 
 #ifndef __NO_STUBS
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index abce34d5c79d..32cbffb0c494 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -344,3 +344,4 @@ ENTRY(sys_call_table)
 	.long sys_open_by_handle_at
 	.long sys_clock_adjtime
 	.long sys_syncfs
+	.long sys_sendmmsg		/* 345 */
diff --git a/include/linux/net.h b/include/linux/net.h
index 94de83c0f877..1da55e9b6f01 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -42,6 +42,7 @@
 #define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
 #define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
 #define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
+#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
 
 typedef enum {
 	SS_FREE = 0,			/* not allocated		*/
diff --git a/include/linux/socket.h b/include/linux/socket.h
index d2b5e982f079..4ef98e422fde 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -333,5 +333,7 @@ struct timespec;
 
 extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
 			  unsigned int flags, struct timespec *timeout);
+extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
+			  unsigned int vlen, unsigned int flags);
 #endif /* not kernel and not glibc */
 #endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 83ecc1749ef6..ab71447d0c5a 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -610,6 +610,8 @@ asmlinkage long sys_send(int, void __user *, size_t, unsigned);
 asmlinkage long sys_sendto(int, void __user *, size_t, unsigned,
 				struct sockaddr __user *, int);
 asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_sendmmsg(int fd, struct mmsghdr __user *msg,
+			     unsigned int vlen, unsigned flags);
 asmlinkage long sys_recv(int, void __user *, size_t, unsigned);
 asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned,
 				struct sockaddr __user *, int __user *);
diff --git a/include/net/compat.h b/include/net/compat.h
index 28d5428ec6a2..9ee75edcc295 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -43,6 +43,8 @@ extern int compat_sock_get_timestampns(struct sock *, struct timespec __user *);
 extern int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *);
 extern int verify_compat_iovec(struct msghdr *, struct iovec *, struct sockaddr *, int);
 extern asmlinkage long compat_sys_sendmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_sendmmsg(int, struct compat_mmsghdr __user *,
+					   unsigned, unsigned);
 extern asmlinkage long compat_sys_recvmsg(int,struct compat_msghdr __user *,unsigned);
 extern asmlinkage long compat_sys_recvmmsg(int, struct compat_mmsghdr __user *,
 					   unsigned, unsigned,
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 25cc41cd8f33..97e966f171c6 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -46,7 +46,9 @@ cond_syscall(sys_getsockopt);
 cond_syscall(compat_sys_getsockopt);
 cond_syscall(sys_shutdown);
 cond_syscall(sys_sendmsg);
+cond_syscall(sys_sendmmsg);
 cond_syscall(compat_sys_sendmsg);
+cond_syscall(compat_sys_sendmmsg);
 cond_syscall(sys_recvmsg);
 cond_syscall(sys_recvmmsg);
 cond_syscall(compat_sys_recvmsg);
diff --git a/net/compat.c b/net/compat.c
index 3649d5895361..c578d9382e19 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -722,11 +722,11 @@ EXPORT_SYMBOL(compat_mc_getsockopt);
 
 /* Argument list sizes for compat_sys_socketcall */
 #define AL(x) ((x) * sizeof(u32))
-static unsigned char nas[20] = {
+static unsigned char nas[21] = {
 	AL(0), AL(3), AL(3), AL(3), AL(2), AL(3),
 	AL(3), AL(3), AL(4), AL(4), AL(4), AL(6),
 	AL(6), AL(2), AL(5), AL(5), AL(3), AL(3),
-	AL(4), AL(5)
+	AL(4), AL(5), AL(4)
 };
 #undef AL
 
@@ -735,6 +735,13 @@ asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, uns
 	return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
 }
 
+asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg,
+				    unsigned vlen, unsigned int flags)
+{
+	return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
+			      flags | MSG_CMSG_COMPAT);
+}
+
 asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags)
 {
 	return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
@@ -780,7 +787,7 @@ asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 	u32 a[6];
 	u32 a0, a1;
 
-	if (call < SYS_SOCKET || call > SYS_RECVMMSG)
+	if (call < SYS_SOCKET || call > SYS_SENDMMSG)
 		return -EINVAL;
 	if (copy_from_user(a, args, nas[call]))
 		return -EFAULT;
@@ -839,6 +846,9 @@ asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 	case SYS_SENDMSG:
 		ret = compat_sys_sendmsg(a0, compat_ptr(a1), a[2]);
 		break;
+	case SYS_SENDMMSG:
+		ret = compat_sys_sendmmsg(a0, compat_ptr(a1), a[2], a[3]);
+		break;
 	case SYS_RECVMSG:
 		ret = compat_sys_recvmsg(a0, compat_ptr(a1), a[2]);
 		break;
diff --git a/net/socket.c b/net/socket.c
index d25f5a9d6fa2..ed50255143d5 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -551,11 +551,10 @@ int sock_tx_timestamp(struct sock *sk, __u8 *tx_flags)
 }
 EXPORT_SYMBOL(sock_tx_timestamp);
 
-static inline int __sock_sendmsg(struct kiocb *iocb, struct socket *sock,
-				 struct msghdr *msg, size_t size)
+static inline int __sock_sendmsg_nosec(struct kiocb *iocb, struct socket *sock,
+				       struct msghdr *msg, size_t size)
 {
 	struct sock_iocb *si = kiocb_to_siocb(iocb);
-	int err;
 
 	sock_update_classid(sock->sk);
 
@@ -564,13 +563,17 @@ static inline int __sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	si->msg = msg;
 	si->size = size;
 
-	err = security_socket_sendmsg(sock, msg, size);
-	if (err)
-		return err;
-
 	return sock->ops->sendmsg(iocb, sock, msg, size);
 }
 
+static inline int __sock_sendmsg(struct kiocb *iocb, struct socket *sock,
+				 struct msghdr *msg, size_t size)
+{
+	int err = security_socket_sendmsg(sock, msg, size);
+
+	return err ?: __sock_sendmsg_nosec(iocb, sock, msg, size);
+}
+
 int sock_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 {
 	struct kiocb iocb;
@@ -586,6 +589,20 @@ int sock_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 }
 EXPORT_SYMBOL(sock_sendmsg);
 
+int sock_sendmsg_nosec(struct socket *sock, struct msghdr *msg, size_t size)
+{
+	struct kiocb iocb;
+	struct sock_iocb siocb;
+	int ret;
+
+	init_sync_kiocb(&iocb, NULL);
+	iocb.private = &siocb;
+	ret = __sock_sendmsg_nosec(&iocb, sock, msg, size);
+	if (-EIOCBQUEUED == ret)
+		ret = wait_on_sync_kiocb(&iocb);
+	return ret;
+}
+
 int kernel_sendmsg(struct socket *sock, struct msghdr *msg,
 		   struct kvec *vec, size_t num, size_t size)
 {
@@ -1863,57 +1880,47 @@ SYSCALL_DEFINE2(shutdown, int, fd, int, how)
 #define COMPAT_NAMELEN(msg)	COMPAT_MSG(msg, msg_namelen)
 #define COMPAT_FLAGS(msg)	COMPAT_MSG(msg, msg_flags)
 
-/*
- *	BSD sendmsg interface
- */
-
-SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
+static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
+			 struct msghdr *msg_sys, unsigned flags, int nosec)
 {
 	struct compat_msghdr __user *msg_compat =
 	    (struct compat_msghdr __user *)msg;
-	struct socket *sock;
 	struct sockaddr_storage address;
 	struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
 	unsigned char ctl[sizeof(struct cmsghdr) + 20]
 	    __attribute__ ((aligned(sizeof(__kernel_size_t))));
 	/* 20 is size of ipv6_pktinfo */
 	unsigned char *ctl_buf = ctl;
-	struct msghdr msg_sys;
 	int err, ctl_len, iov_size, total_len;
-	int fput_needed;
 
 	err = -EFAULT;
 	if (MSG_CMSG_COMPAT & flags) {
-		if (get_compat_msghdr(&msg_sys, msg_compat))
+		if (get_compat_msghdr(msg_sys, msg_compat))
 			return -EFAULT;
-	} else if (copy_from_user(&msg_sys, msg, sizeof(struct msghdr)))
+	} else if (copy_from_user(msg_sys, msg, sizeof(struct msghdr)))
 		return -EFAULT;
 
-	sock = sockfd_lookup_light(fd, &err, &fput_needed);
-	if (!sock)
-		goto out;
-
 	/* do not move before msg_sys is valid */
 	err = -EMSGSIZE;
-	if (msg_sys.msg_iovlen > UIO_MAXIOV)
-		goto out_put;
+	if (msg_sys->msg_iovlen > UIO_MAXIOV)
+		goto out;
 
 	/* Check whether to allocate the iovec area */
 	err = -ENOMEM;
-	iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
-	if (msg_sys.msg_iovlen > UIO_FASTIOV) {
+	iov_size = msg_sys->msg_iovlen * sizeof(struct iovec);
+	if (msg_sys->msg_iovlen > UIO_FASTIOV) {
 		iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
 		if (!iov)
-			goto out_put;
+			goto out;
 	}
 
 	/* This will also move the address data into kernel space */
 	if (MSG_CMSG_COMPAT & flags) {
-		err = verify_compat_iovec(&msg_sys, iov,
+		err = verify_compat_iovec(msg_sys, iov,
 					  (struct sockaddr *)&address,
 					  VERIFY_READ);
 	} else
-		err = verify_iovec(&msg_sys, iov,
+		err = verify_iovec(msg_sys, iov,
 				   (struct sockaddr *)&address,
 				   VERIFY_READ);
 	if (err < 0)
@@ -1922,17 +1929,17 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
 
 	err = -ENOBUFS;
 
-	if (msg_sys.msg_controllen > INT_MAX)
+	if (msg_sys->msg_controllen > INT_MAX)
 		goto out_freeiov;
-	ctl_len = msg_sys.msg_controllen;
+	ctl_len = msg_sys->msg_controllen;
 	if ((MSG_CMSG_COMPAT & flags) && ctl_len) {
 		err =
-		    cmsghdr_from_user_compat_to_kern(&msg_sys, sock->sk, ctl,
+		    cmsghdr_from_user_compat_to_kern(msg_sys, sock->sk, ctl,
 						     sizeof(ctl));
 		if (err)
 			goto out_freeiov;
-		ctl_buf = msg_sys.msg_control;
-		ctl_len = msg_sys.msg_controllen;
+		ctl_buf = msg_sys->msg_control;
+		ctl_len = msg_sys->msg_controllen;
 	} else if (ctl_len) {
 		if (ctl_len > sizeof(ctl)) {
 			ctl_buf = sock_kmalloc(sock->sk, ctl_len, GFP_KERNEL);
@@ -1941,21 +1948,22 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
 		}
 		err = -EFAULT;
 		/*
-		 * Careful! Before this, msg_sys.msg_control contains a user pointer.
+		 * Careful! Before this, msg_sys->msg_control contains a user pointer.
 		 * Afterwards, it will be a kernel pointer. Thus the compiler-assisted
 		 * checking falls down on this.
 		 */
 		if (copy_from_user(ctl_buf,
-				   (void __user __force *)msg_sys.msg_control,
+				   (void __user __force *)msg_sys->msg_control,
 				   ctl_len))
 			goto out_freectl;
-		msg_sys.msg_control = ctl_buf;
+		msg_sys->msg_control = ctl_buf;
 	}
-	msg_sys.msg_flags = flags;
+	msg_sys->msg_flags = flags;
 
 	if (sock->file->f_flags & O_NONBLOCK)
-		msg_sys.msg_flags |= MSG_DONTWAIT;
-	err = sock_sendmsg(sock, &msg_sys, total_len);
+		msg_sys->msg_flags |= MSG_DONTWAIT;
+	err = (nosec ? sock_sendmsg_nosec : sock_sendmsg)(sock, msg_sys,
+							  total_len);
 
 out_freectl:
 	if (ctl_buf != ctl)
@@ -1963,12 +1971,114 @@ out_freectl:
 out_freeiov:
 	if (iov != iovstack)
 		sock_kfree_s(sock->sk, iov, iov_size);
-out_put:
+out:
+	return err;
+}
+
+/*
+ *	BSD sendmsg interface
+ */
+
+SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
+{
+	int fput_needed, err;
+	struct msghdr msg_sys;
+	struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed);
+
+	if (!sock)
+		goto out;
+
+	err = __sys_sendmsg(sock, msg, &msg_sys, flags, 0);
+
 	fput_light(sock->file, fput_needed);
 out:
 	return err;
 }
 
+/*
+ *	Linux sendmmsg interface
+ */
+
+int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
+		   unsigned int flags)
+{
+	int fput_needed, err, datagrams;
+	struct socket *sock;
+	struct mmsghdr __user *entry;
+	struct compat_mmsghdr __user *compat_entry;
+	struct msghdr msg_sys;
+
+	datagrams = 0;
+
+	sock = sockfd_lookup_light(fd, &err, &fput_needed);
+	if (!sock)
+		return err;
+
+	err = sock_error(sock->sk);
+	if (err)
+		goto out_put;
+
+	entry = mmsg;
+	compat_entry = (struct compat_mmsghdr __user *)mmsg;
+
+	while (datagrams < vlen) {
+		/*
+		 * No need to ask LSM for more than the first datagram.
+		 */
+		if (MSG_CMSG_COMPAT & flags) {
+			err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry,
+					    &msg_sys, flags, datagrams);
+			if (err < 0)
+				break;
+			err = __put_user(err, &compat_entry->msg_len);
+			++compat_entry;
+		} else {
+			err = __sys_sendmsg(sock, (struct msghdr __user *)entry,
+					    &msg_sys, flags, datagrams);
+			if (err < 0)
+				break;
+			err = put_user(err, &entry->msg_len);
+			++entry;
+		}
+
+		if (err)
+			break;
+		++datagrams;
+	}
+
+out_put:
+	fput_light(sock->file, fput_needed);
+
+	if (err == 0)
+		return datagrams;
+
+	if (datagrams != 0) {
+		/*
+		 * We may send less entries than requested (vlen) if the
+		 * sock is non blocking...
+		 */
+		if (err != -EAGAIN) {
+			/*
+			 * ... or if sendmsg returns an error after we
+			 * send some datagrams, where we record the
+			 * error to return on the next call or if the
+			 * app asks about it using getsockopt(SO_ERROR).
+			 */
+			sock->sk->sk_err = -err;
+		}
+
+		return datagrams;
+	}
+
+	return err;
+}
+
+SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg,
+		unsigned int, vlen, unsigned int, flags)
+{
+	return __sys_sendmmsg(fd, mmsg, vlen, flags);
+}
+
 static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
 			 struct msghdr *msg_sys, unsigned flags, int nosec)
 {
@@ -2214,11 +2324,11 @@ SYSCALL_DEFINE5(recvmmsg, int, fd, struct mmsghdr __user *, mmsg,
 #ifdef __ARCH_WANT_SYS_SOCKETCALL
 /* Argument list sizes for sys_socketcall */
 #define AL(x) ((x) * sizeof(unsigned long))
-static const unsigned char nargs[20] = {
+static const unsigned char nargs[21] = {
 	AL(0), AL(3), AL(3), AL(3), AL(2), AL(3),
 	AL(3), AL(3), AL(4), AL(4), AL(4), AL(6),
 	AL(6), AL(2), AL(5), AL(5), AL(3), AL(3),
-	AL(4), AL(5)
+	AL(4), AL(5), AL(4)
 };
 
 #undef AL
@@ -2238,7 +2348,7 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
 	int err;
 	unsigned int len;
 
-	if (call < 1 || call > SYS_RECVMMSG)
+	if (call < 1 || call > SYS_SENDMMSG)
 		return -EINVAL;
 
 	len = nargs[call];
@@ -2313,6 +2423,9 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
 	case SYS_SENDMSG:
 		err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
+	case SYS_SENDMMSG:
+		err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]);
+		break;
 	case SYS_RECVMSG:
 		err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
-- 
cgit v1.2.3-58-ga151


From ff1b6e69ad4f31fb3c9c6da2665655f2e798dd70 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 4 May 2011 15:37:28 +0200
Subject: nl80211/cfg80211: WoWLAN support

This is based on (but now quite far from) the
original work from Luis and Eliad. Add support
for configuring WoWLAN triggers, and getting
the configuration out again. Changes from the
original patchset are too numerous to list,
but one important change needs highlighting:
the suspend() callback is passed NULL for the
trigger configuration if userspace has not
configured WoWLAN at all.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h |  99 ++++++++++++++++++++
 include/net/cfg80211.h  |  74 ++++++++++++++-
 net/mac80211/cfg.c      |   3 +-
 net/wireless/core.c     |   8 ++
 net/wireless/core.h     |  14 +++
 net/wireless/nl80211.c  | 243 ++++++++++++++++++++++++++++++++++++++++++++++++
 net/wireless/sysfs.c    |   2 +-
 7 files changed, 439 insertions(+), 4 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index be8df57b789d..a75dea9c416e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -420,6 +420,14 @@
  *      new station with the AUTHENTICATED flag unset and maybe change it later
  *      depending on the authentication result.
  *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ *	Since wireless is more complex than wired ethernet, it supports
+ *	various triggers. These triggers can be configured through this
+ *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ *	more background information, see
+ *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -534,6 +542,9 @@ enum nl80211_commands {
 
 	NL80211_CMD_NEW_PEER_CANDIDATE,
 
+	NL80211_CMD_GET_WOWLAN,
+	NL80211_CMD_SET_WOWLAN,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -903,6 +914,13 @@ enum nl80211_commands {
  *	allows auth frames in a mesh to be passed to userspace for processing via
  *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
  *
+ * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
+ *	the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ *	indicate which WoW triggers should be enabled. This is also
+ *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ *	triggers.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1092,6 +1110,9 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_SUPPORT_MESH_AUTH,
 
+	NL80211_ATTR_WOWLAN_TRIGGERS,
+	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2061,4 +2082,82 @@ enum nl80211_tx_power_setting {
 	NL80211_TX_POWER_FIXED,
 };
 
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ *	a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ *	a bit for each byte in the pattern. The lowest-order bit corresponds
+ *	to the first byte of the pattern, but the bytes of the pattern are
+ *	in a little-endian-like format, i.e. the 9th byte of the pattern
+ *	corresponds to the lowest-order bit in the second byte of the mask.
+ *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ *	xx indicates "don't care") would be represented by a pattern of
+ *	twelve zero bytes, and a mask of "0xed,0x07".
+ *	Note that the pattern matching is done as though frames were not
+ *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ *	first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+	__NL80211_WOWLAN_PKTPAT_INVALID,
+	NL80211_WOWLAN_PKTPAT_MASK,
+	NL80211_WOWLAN_PKTPAT_PATTERN,
+
+	NUM_NL80211_WOWLAN_PKTPAT,
+	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+	__u32 max_patterns;
+	__u32 min_pattern_len;
+	__u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ *	the chip into a special state -- works best with chips that have
+ *	support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ *	is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ *	which are passed in an array of nested attributes, each nested attribute
+ *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ *	i.e. as though the packet was an 802.3 packet, so the pattern matching
+ *	is done after the packet is converted to the MSDU.
+ *
+ *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ *	carrying a &struct nl80211_wowlan_pattern_support.
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+	__NL80211_WOWLAN_TRIG_INVALID,
+	NL80211_WOWLAN_TRIG_ANY,
+	NL80211_WOWLAN_TRIG_DISCONNECT,
+	NL80211_WOWLAN_TRIG_MAGIC_PKT,
+	NL80211_WOWLAN_TRIG_PKT_PATTERN,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TRIG,
+	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4932dfcb72b4..0920daf36807 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1087,6 +1087,38 @@ struct cfg80211_pmksa {
 	u8 *pmkid;
 };
 
+/**
+ * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
+ * @mask: bitmask where to match pattern and where to ignore bytes,
+ *	one bit per byte, in same format as nl80211
+ * @pattern: bytes to match where bitmask is 1
+ * @pattern_len: length of pattern (in bytes)
+ *
+ * Internal note: @mask and @pattern are allocated in one chunk of
+ * memory, free @mask only!
+ */
+struct cfg80211_wowlan_trig_pkt_pattern {
+	u8 *mask, *pattern;
+	int pattern_len;
+};
+
+/**
+ * struct cfg80211_wowlan - Wake on Wireless-LAN support info
+ *
+ * This structure defines the enabled WoWLAN triggers for the device.
+ * @any: wake up on any activity -- special trigger if device continues
+ *	operating as normal during suspend
+ * @disconnect: wake up if getting disconnected
+ * @magic_pkt: wake up on receiving magic packet
+ * @patterns: wake up on receiving packet matching a pattern
+ * @n_patterns: number of patterns
+ */
+struct cfg80211_wowlan {
+	bool any, disconnect, magic_pkt;
+	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
+	int n_patterns;
+};
+
 /**
  * struct cfg80211_ops - backend description for wireless configuration
  *
@@ -1100,7 +1132,9 @@ struct cfg80211_pmksa {
  * wireless extensions but this is subject to reevaluation as soon as this
  * code is used more widely and we have a first user without wext.
  *
- * @suspend: wiphy device needs to be suspended
+ * @suspend: wiphy device needs to be suspended. The variable @wow will
+ *	be %NULL or contain the enabled Wake-on-Wireless triggers that are
+ *	configured for the device.
  * @resume: wiphy device needs to be resumed
  *
  * @add_virtual_intf: create a new virtual interface with the given name,
@@ -1244,7 +1278,7 @@ struct cfg80211_pmksa {
  * @get_ringparam: Get tx and rx ring current and maximum sizes.
  */
 struct cfg80211_ops {
-	int	(*suspend)(struct wiphy *wiphy);
+	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
 	int	(*resume)(struct wiphy *wiphy);
 
 	struct net_device * (*add_virtual_intf)(struct wiphy *wiphy,
@@ -1479,6 +1513,38 @@ struct ieee80211_txrx_stypes {
 	u16 tx, rx;
 };
 
+/**
+ * enum wiphy_wowlan_support_flags - WoWLAN support flags
+ * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any"
+ *	trigger that keeps the device operating as-is and
+ *	wakes up the host on any activity, for example a
+ *	received packet that passed filtering; note that the
+ *	packet should be preserved in that case
+ * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
+ *	(see nl80211.h)
+ * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
+ */
+enum wiphy_wowlan_support_flags {
+	WIPHY_WOWLAN_ANY	= BIT(0),
+	WIPHY_WOWLAN_MAGIC_PKT	= BIT(1),
+	WIPHY_WOWLAN_DISCONNECT	= BIT(2),
+};
+
+/**
+ * struct wiphy_wowlan_support - WoWLAN support data
+ * @flags: see &enum wiphy_wowlan_support_flags
+ * @n_patterns: number of supported wakeup patterns
+ *	(see nl80211.h for the pattern definition)
+ * @pattern_max_len: maximum length of each pattern
+ * @pattern_min_len: minimum length of each pattern
+ */
+struct wiphy_wowlan_support {
+	u32 flags;
+	int n_patterns;
+	int pattern_max_len;
+	int pattern_min_len;
+};
+
 /**
  * struct wiphy - wireless hardware description
  * @reg_notifier: the driver's regulatory notification callback,
@@ -1546,6 +1612,8 @@ struct ieee80211_txrx_stypes {
  *
  * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
  *	may request, if implemented.
+ *
+ * @wowlan: WoWLAN support information
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1583,6 +1651,8 @@ struct wiphy {
 	char fw_version[ETHTOOL_BUSINFO_LEN];
 	u32 hw_version;
 
+	struct wiphy_wowlan_support wowlan;
+
 	u16 max_remain_on_channel_duration;
 
 	u8 max_num_pmkids;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 12d52cec9515..321d598eb8cb 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1297,7 +1297,8 @@ static int ieee80211_set_channel(struct wiphy *wiphy,
 }
 
 #ifdef CONFIG_PM
-static int ieee80211_suspend(struct wiphy *wiphy)
+static int ieee80211_suspend(struct wiphy *wiphy,
+			     struct cfg80211_wowlan *wowlan)
 {
 	return __ieee80211_suspend(wiphy_priv(wiphy));
 }
diff --git a/net/wireless/core.c b/net/wireless/core.c
index bbf1fa11107a..bea0d80710c8 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -493,6 +493,13 @@ int wiphy_register(struct wiphy *wiphy)
 		return -EINVAL;
 	}
 
+	if (rdev->wiphy.wowlan.n_patterns) {
+		if (WARN_ON(!rdev->wiphy.wowlan.pattern_min_len ||
+			    rdev->wiphy.wowlan.pattern_min_len >
+			    rdev->wiphy.wowlan.pattern_max_len))
+			return -EINVAL;
+	}
+
 	/* check and set up bitrates */
 	ieee80211_set_bitrate_flags(wiphy);
 
@@ -631,6 +638,7 @@ void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
 	mutex_destroy(&rdev->devlist_mtx);
 	list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
 		cfg80211_put_bss(&scan->pub);
+	cfg80211_rdev_free_wowlan(rdev);
 	kfree(rdev);
 }
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 26a0a084e16b..7a18c10a7fb6 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -70,6 +70,8 @@ struct cfg80211_registered_device {
 	struct work_struct conn_work;
 	struct work_struct event_work;
 
+	struct cfg80211_wowlan *wowlan;
+
 	/* must be last because of the way we do wiphy_priv(),
 	 * and it should at least be aligned to NETDEV_ALIGN */
 	struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -89,6 +91,18 @@ bool wiphy_idx_valid(int wiphy_idx)
 	return wiphy_idx >= 0;
 }
 
+static inline void
+cfg80211_rdev_free_wowlan(struct cfg80211_registered_device *rdev)
+{
+	int i;
+
+	if (!rdev->wowlan)
+		return;
+	for (i = 0; i < rdev->wowlan->n_patterns; i++)
+		kfree(rdev->wowlan->patterns[i].mask);
+	kfree(rdev->wowlan->patterns);
+	kfree(rdev->wowlan);
+}
 
 extern struct workqueue_struct *cfg80211_wq;
 extern struct mutex cfg80211_mutex;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ab77f943dc04..0a199a1ca9b6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -173,6 +173,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_MCAST_RATE] = { .type = NLA_U32 },
 	[NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG },
 	[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
+	[NL80211_ATTR_WOWLAN_TRIGGERS] = { .type = NLA_NESTED },
 };
 
 /* policy for the key attributes */
@@ -194,6 +195,15 @@ nl80211_key_default_policy[NUM_NL80211_KEY_DEFAULT_TYPES] = {
 	[NL80211_KEY_DEFAULT_TYPE_MULTICAST] = { .type = NLA_FLAG },
 };
 
+/* policy for WoWLAN attributes */
+static const struct nla_policy
+nl80211_wowlan_policy[NUM_NL80211_WOWLAN_TRIG] = {
+	[NL80211_WOWLAN_TRIG_ANY] = { .type = NLA_FLAG },
+	[NL80211_WOWLAN_TRIG_DISCONNECT] = { .type = NLA_FLAG },
+	[NL80211_WOWLAN_TRIG_MAGIC_PKT] = { .type = NLA_FLAG },
+	[NL80211_WOWLAN_TRIG_PKT_PATTERN] = { .type = NLA_NESTED },
+};
+
 /* ifidx get helper */
 static int nl80211_get_ifidx(struct netlink_callback *cb)
 {
@@ -821,6 +831,35 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		nla_nest_end(msg, nl_ifs);
 	}
 
+	if (dev->wiphy.wowlan.flags || dev->wiphy.wowlan.n_patterns) {
+		struct nlattr *nl_wowlan;
+
+		nl_wowlan = nla_nest_start(msg,
+				NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED);
+		if (!nl_wowlan)
+			goto nla_put_failure;
+
+		if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_ANY)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_ANY);
+		if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_DISCONNECT)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_DISCONNECT);
+		if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_MAGIC_PKT)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT);
+		if (dev->wiphy.wowlan.n_patterns) {
+			struct nl80211_wowlan_pattern_support pat = {
+				.max_patterns = dev->wiphy.wowlan.n_patterns,
+				.min_pattern_len =
+					dev->wiphy.wowlan.pattern_min_len,
+				.max_pattern_len =
+					dev->wiphy.wowlan.pattern_max_len,
+			};
+			NLA_PUT(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN,
+				sizeof(pat), &pat);
+		}
+
+		nla_nest_end(msg, nl_wowlan);
+	}
+
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
@@ -4808,6 +4847,194 @@ static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info)
 	return cfg80211_leave_mesh(rdev, dev);
 }
 
+static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct sk_buff *msg;
+	void *hdr;
+
+	if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns)
+		return -EOPNOTSUPP;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
+			     NL80211_CMD_GET_WOWLAN);
+	if (!hdr)
+		goto nla_put_failure;
+
+	if (rdev->wowlan) {
+		struct nlattr *nl_wowlan;
+
+		nl_wowlan = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS);
+		if (!nl_wowlan)
+			goto nla_put_failure;
+
+		if (rdev->wowlan->any)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_ANY);
+		if (rdev->wowlan->disconnect)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_DISCONNECT);
+		if (rdev->wowlan->magic_pkt)
+			NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT);
+		if (rdev->wowlan->n_patterns) {
+			struct nlattr *nl_pats, *nl_pat;
+			int i, pat_len;
+
+			nl_pats = nla_nest_start(msg,
+					NL80211_WOWLAN_TRIG_PKT_PATTERN);
+			if (!nl_pats)
+				goto nla_put_failure;
+
+			for (i = 0; i < rdev->wowlan->n_patterns; i++) {
+				nl_pat = nla_nest_start(msg, i + 1);
+				if (!nl_pat)
+					goto nla_put_failure;
+				pat_len = rdev->wowlan->patterns[i].pattern_len;
+				NLA_PUT(msg, NL80211_WOWLAN_PKTPAT_MASK,
+					DIV_ROUND_UP(pat_len, 8),
+					rdev->wowlan->patterns[i].mask);
+				NLA_PUT(msg, NL80211_WOWLAN_PKTPAT_PATTERN,
+					pat_len,
+					rdev->wowlan->patterns[i].pattern);
+				nla_nest_end(msg, nl_pat);
+			}
+			nla_nest_end(msg, nl_pats);
+		}
+
+		nla_nest_end(msg, nl_wowlan);
+	}
+
+	genlmsg_end(msg, hdr);
+	return genlmsg_reply(msg, info);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+
+static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct nlattr *tb[NUM_NL80211_WOWLAN_TRIG];
+	struct cfg80211_wowlan no_triggers = {};
+	struct cfg80211_wowlan new_triggers = {};
+	struct wiphy_wowlan_support *wowlan = &rdev->wiphy.wowlan;
+	int err, i;
+
+	if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns)
+		return -EOPNOTSUPP;
+
+	if (!info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS])
+		goto no_triggers;
+
+	err = nla_parse(tb, MAX_NL80211_WOWLAN_TRIG,
+			nla_data(info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]),
+			nla_len(info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]),
+			nl80211_wowlan_policy);
+	if (err)
+		return err;
+
+	if (tb[NL80211_WOWLAN_TRIG_ANY]) {
+		if (!(wowlan->flags & WIPHY_WOWLAN_ANY))
+			return -EINVAL;
+		new_triggers.any = true;
+	}
+
+	if (tb[NL80211_WOWLAN_TRIG_DISCONNECT]) {
+		if (!(wowlan->flags & WIPHY_WOWLAN_DISCONNECT))
+			return -EINVAL;
+		new_triggers.disconnect = true;
+	}
+
+	if (tb[NL80211_WOWLAN_TRIG_MAGIC_PKT]) {
+		if (!(wowlan->flags & WIPHY_WOWLAN_MAGIC_PKT))
+			return -EINVAL;
+		new_triggers.magic_pkt = true;
+	}
+
+	if (tb[NL80211_WOWLAN_TRIG_PKT_PATTERN]) {
+		struct nlattr *pat;
+		int n_patterns = 0;
+		int rem, pat_len, mask_len;
+		struct nlattr *pat_tb[NUM_NL80211_WOWLAN_PKTPAT];
+
+		nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN],
+				    rem)
+			n_patterns++;
+		if (n_patterns > wowlan->n_patterns)
+			return -EINVAL;
+
+		new_triggers.patterns = kcalloc(n_patterns,
+						sizeof(new_triggers.patterns[0]),
+						GFP_KERNEL);
+		if (!new_triggers.patterns)
+			return -ENOMEM;
+
+		new_triggers.n_patterns = n_patterns;
+		i = 0;
+
+		nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN],
+				    rem) {
+			nla_parse(pat_tb, MAX_NL80211_WOWLAN_PKTPAT,
+				  nla_data(pat), nla_len(pat), NULL);
+			err = -EINVAL;
+			if (!pat_tb[NL80211_WOWLAN_PKTPAT_MASK] ||
+			    !pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN])
+				goto error;
+			pat_len = nla_len(pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN]);
+			mask_len = DIV_ROUND_UP(pat_len, 8);
+			if (nla_len(pat_tb[NL80211_WOWLAN_PKTPAT_MASK]) !=
+			    mask_len)
+				goto error;
+			if (pat_len > wowlan->pattern_max_len ||
+			    pat_len < wowlan->pattern_min_len)
+				goto error;
+
+			new_triggers.patterns[i].mask =
+				kmalloc(mask_len + pat_len, GFP_KERNEL);
+			if (!new_triggers.patterns[i].mask) {
+				err = -ENOMEM;
+				goto error;
+			}
+			new_triggers.patterns[i].pattern =
+				new_triggers.patterns[i].mask + mask_len;
+			memcpy(new_triggers.patterns[i].mask,
+			       nla_data(pat_tb[NL80211_WOWLAN_PKTPAT_MASK]),
+			       mask_len);
+			new_triggers.patterns[i].pattern_len = pat_len;
+			memcpy(new_triggers.patterns[i].pattern,
+			       nla_data(pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN]),
+			       pat_len);
+			i++;
+		}
+	}
+
+	if (memcmp(&new_triggers, &no_triggers, sizeof(new_triggers))) {
+		struct cfg80211_wowlan *ntrig;
+		ntrig = kmemdup(&new_triggers, sizeof(new_triggers),
+				GFP_KERNEL);
+		if (!ntrig) {
+			err = -ENOMEM;
+			goto error;
+		}
+		cfg80211_rdev_free_wowlan(rdev);
+		rdev->wowlan = ntrig;
+	} else {
+ no_triggers:
+		cfg80211_rdev_free_wowlan(rdev);
+		rdev->wowlan = NULL;
+	}
+
+	return 0;
+ error:
+	for (i = 0; i < new_triggers.n_patterns; i++)
+		kfree(new_triggers.patterns[i].mask);
+	kfree(new_triggers.patterns);
+	return err;
+}
+
 #define NL80211_FLAG_NEED_WIPHY		0x01
 #define NL80211_FLAG_NEED_NETDEV	0x02
 #define NL80211_FLAG_NEED_RTNL		0x04
@@ -5306,6 +5533,22 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+	{
+		.cmd = NL80211_CMD_GET_WOWLAN,
+		.doit = nl80211_get_wowlan,
+		.policy = nl80211_policy,
+		/* can be retrieved by unprivileged users */
+		.internal_flags = NL80211_FLAG_NEED_WIPHY |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
+		.cmd = NL80211_CMD_SET_WOWLAN,
+		.doit = nl80211_set_wowlan,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_WIPHY |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 };
 
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c
index 4294fa22bb2d..c6e4ca6a7d2e 100644
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -93,7 +93,7 @@ static int wiphy_suspend(struct device *dev, pm_message_t state)
 
 	if (rdev->ops->suspend) {
 		rtnl_lock();
-		ret = rdev->ops->suspend(&rdev->wiphy);
+		ret = rdev->ops->suspend(&rdev->wiphy, rdev->wowlan);
 		rtnl_unlock();
 	}
 
-- 
cgit v1.2.3-58-ga151


From 1ab7b6ac2709d0eb05a7144cd0e14faa3a7ea162 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Thu, 14 Apr 2011 23:46:06 -0700
Subject: ethtool: remove phys_id from ethtool_ops

After that all the upstream kernel drivers now use phys_id,
and the old ethtool_ops interface (phys_id) can be removed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/ethtool.h | 7 -------
 net/core/ethtool.c      | 6 +-----
 2 files changed, 1 insertion(+), 12 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 4194a2067a14..d659fdc77eb3 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -814,12 +814,6 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
  *	the indicator accordingly.  Finally, it is called with the argument
  *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
  *	negative error code or zero.
- * @phys_id: Deprecated in favour of @set_phys_id.
- *	Identify the physical device, e.g. by flashing an LED
- *	attached to it until interrupted by a signal or the given time
- *	(in seconds) elapses.  If the given time is zero, use a default
- *	time limit.  Returns a negative error code or zero.  Being
- *	interrupted by a signal is not an error.
  * @get_ethtool_stats: Return extended statistics about the device.
  *	This is only useful if the device maintains statistics not
  *	included in &struct rtnl_link_stats64.
@@ -908,7 +902,6 @@ struct ethtool_ops {
 	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
 	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
 	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
-	int	(*phys_id)(struct net_device *, u32);
 	void	(*get_ethtool_stats)(struct net_device *,
 				     struct ethtool_stats *, u64 *);
 	int	(*begin)(struct net_device *);
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index d8b1a8d85a96..927819d92248 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1655,7 +1655,7 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 	static bool busy;
 	int rc;
 
-	if (!dev->ethtool_ops->set_phys_id && !dev->ethtool_ops->phys_id)
+	if (!dev->ethtool_ops->set_phys_id)
 		return -EOPNOTSUPP;
 
 	if (busy)
@@ -1664,10 +1664,6 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 	if (copy_from_user(&id, useraddr, sizeof(id)))
 		return -EFAULT;
 
-	if (!dev->ethtool_ops->set_phys_id)
-		/* Do it the old way */
-		return dev->ethtool_ops->phys_id(dev, id.data);
-
 	rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE);
 	if (rc < 0)
 		return rc;
-- 
cgit v1.2.3-58-ga151


From 57cc71bc3c0cf18bfd1b7bc8cd0eb6c303da24c5 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Mon, 2 May 2011 21:30:08 +0000
Subject: ethtool: Add 20G bit definitions

Add 20G supported and advertising bit definitions.
20G will be supported with the 57840 chips.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
------
 include/linux/ethtool.h |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/ethtool.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index d659fdc77eb3..bd0b50b85f06 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -1025,6 +1025,8 @@ struct ethtool_ops {
 #define SUPPORTED_10000baseKX4_Full	(1 << 18)
 #define SUPPORTED_10000baseKR_Full	(1 << 19)
 #define SUPPORTED_10000baseR_FEC	(1 << 20)
+#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
+#define SUPPORTED_20000baseKR2_Full	(1 << 22)
 
 /* Indicates what features are advertised by the interface. */
 #define ADVERTISED_10baseT_Half		(1 << 0)
@@ -1048,6 +1050,8 @@ struct ethtool_ops {
 #define ADVERTISED_10000baseKX4_Full	(1 << 18)
 #define ADVERTISED_10000baseKR_Full	(1 << 19)
 #define ADVERTISED_10000baseR_FEC	(1 << 20)
+#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
+#define ADVERTISED_20000baseKR2_Full	(1 << 22)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
-- 
cgit v1.2.3-58-ga151


From eed2a12f1ed9aabf0676f4d0db34aad51976c5c6 Mon Sep 17 00:00:00 2001
From: Mahesh Bandewar <maheshb@google.com>
Date: Wed, 4 May 2011 15:30:11 +0000
Subject: net: Allow ethtool to set interface in loopback mode.

This patch enables ethtool to set the loopback mode on a given interface.
By configuring the interface in loopback mode in conjunction with a policy
route / rule, a userland application can stress the egress / ingress path
exposing the flows of the change in progress and potentially help developer(s)
understand the impact of those changes without even sending a packet out
on the network.

Following set of commands illustrates one such example -
    a) ip -4 addr add 192.168.1.1/24 dev eth1
    b) ip -4 rule add from all iif eth1 lookup 250
    c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250
    d) arp -Ds 192.168.1.100 eth1
    e) arp -Ds 192.168.1.200 eth1
    f) sysctl -w net.ipv4.ip_nonlocal_bind=1
    g) sysctl -w net.ipv4.conf.all.accept_local=1
    # Assuming that the machine has 8 cores
    h) taskset 000f netserver -L 192.168.1.200
    i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/loopback.c    | 3 ++-
 include/linux/netdevice.h | 3 ++-
 net/core/ethtool.c        | 2 +-
 3 files changed, 5 insertions(+), 3 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index d70fb76edb77..4ce9e5f2c069 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -174,7 +174,8 @@ static void loopback_setup(struct net_device *dev)
 		| NETIF_F_HIGHDMA
 		| NETIF_F_LLTX
 		| NETIF_F_NETNS_LOCAL
-		| NETIF_F_VLAN_CHALLENGED;
+		| NETIF_F_VLAN_CHALLENGED
+		| NETIF_F_LOOPBACK;
 	dev->ethtool_ops	= &loopback_ethtool_ops;
 	dev->header_ops		= &eth_header_ops;
 	dev->netdev_ops		= &loopback_ops;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index d5de66af46f9..e7244ed1f9a8 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1067,6 +1067,7 @@ struct net_device {
 #define NETIF_F_RXHASH		(1 << 28) /* Receive hashing offload */
 #define NETIF_F_RXCSUM		(1 << 29) /* Receive checksumming offload */
 #define NETIF_F_NOCACHE_COPY	(1 << 30) /* Use no-cache copyfromuser */
+#define NETIF_F_LOOPBACK	(1 << 31) /* Enable loopback */
 
 	/* Segmentation offload features */
 #define NETIF_F_GSO_SHIFT	16
@@ -1082,7 +1083,7 @@ struct net_device {
 	/* = all defined minus driver/device-class-related */
 #define NETIF_F_NEVER_CHANGE	(NETIF_F_VLAN_CHALLENGED | \
 				  NETIF_F_LLTX | NETIF_F_NETNS_LOCAL)
-#define NETIF_F_ETHTOOL_BITS	(0x7f3fffff & ~NETIF_F_NEVER_CHANGE)
+#define NETIF_F_ETHTOOL_BITS	(0xff3fffff & ~NETIF_F_NEVER_CHANGE)
 
 	/* List of features with software fallbacks. */
 #define NETIF_F_GSO_SOFTWARE	(NETIF_F_TSO | NETIF_F_TSO_ECN | \
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 927819d92248..b6f405888538 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -362,7 +362,7 @@ static const char netdev_features_strings[ETHTOOL_DEV_FEATURE_WORDS * 32][ETH_GS
 	/* NETIF_F_RXHASH */          "rx-hashing",
 	/* NETIF_F_RXCSUM */          "rx-checksum",
 	/* NETIF_F_NOCACHE_COPY */    "tx-nocache-copy"
-	"",
+	/* NETIF_F_LOOPBACK */        "loopback",
 };
 
 static int __ethtool_get_sset_count(struct net_device *dev, int sset)
-- 
cgit v1.2.3-58-ga151


From 48752e1b1802231ef2a076f34d861918b7d571c3 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Mon, 9 May 2011 04:40:44 +0000
Subject: vlan: remove one synchronize_net() call
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

At VLAN dismantle phase, unregister_vlan_dev() makes one
synchronize_net() call after vlan_group_set_device(grp, vlan_id, NULL).

This call can be safely removed because we are calling
unregister_netdevice_queue() to queue device for deletion, and this
process needs at least one rcu grace period to complete.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ben Greear <greearb@candelatech.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/if_vlan.h |  1 -
 net/8021q/vlan.c        | 10 ++++------
 2 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 546d9d35fbd4..290bd8ac94cf 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -86,7 +86,6 @@ struct vlan_group {
 					    * the vlan is attached to.
 					    */
 	unsigned int		nr_vlans;
-	int			killall;
 	struct hlist_node	hlist;	/* linked list */
 	struct net_device **vlan_devices_arrays[VLAN_GROUP_ARRAY_SPLIT_PARTS];
 	struct rcu_head		rcu;
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 969e7004cf86..718d635d3379 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -120,9 +120,10 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head)
 	grp->nr_vlans--;
 
 	vlan_group_set_device(grp, vlan_id, NULL);
-	if (!grp->killall)
-		synchronize_net();
-
+	/* Because unregister_netdevice_queue() makes sure at least one rcu
+	 * grace period is respected before device freeing,
+	 * we dont need to call synchronize_net() here.
+	 */
 	unregister_netdevice_queue(dev, head);
 
 	/* If the group is now empty, kill off the group. */
@@ -478,9 +479,6 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 		if (dev->reg_state != NETREG_UNREGISTERING)
 			break;
 
-		/* Delete all VLANs for this dev. */
-		grp->killall = 1;
-
 		for (i = 0; i < VLAN_N_VID; i++) {
 			vlandev = vlan_group_get_device(grp, i);
 			if (!vlandev)
-- 
cgit v1.2.3-58-ga151


From 4940fc889e1e63667a15243028ddcd84d471cd8e Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 7 May 2011 23:00:07 +0000
Subject: net: add mac_pton() for parsing MAC address

mac_pton() parses MAC address in form XX:XX:XX:XX:XX:XX and only in that form.

mac_pton() doesn't dirty result until it's sure string representation is valid.

mac_pton() doesn't care about characters _after_ last octet,
it's up to caller to deal with it.

mac_pton() diverges from 0/-E return value convention.
Target usage:

	if (!mac_pton(str, whatever->mac))
		return -EINVAL;
	/* ->mac being u8 [ETH_ALEN] is filled at this point. */
	/* optionally check str[3 * ETH_ALEN - 1] for termination */

Use mac_pton() in pktgen and netconsole for start.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netconsole.c | 20 ++++--------------
 include/linux/if_ether.h |  1 +
 net/core/netpoll.c       | 26 +-----------------------
 net/core/pktgen.c        | 53 ++++++++----------------------------------------
 net/core/utils.c         | 24 ++++++++++++++++++++++
 5 files changed, 38 insertions(+), 86 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index 62fdbaa1fb60..a83e101440fd 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -429,8 +429,6 @@ static ssize_t store_remote_mac(struct netconsole_target *nt,
 				size_t count)
 {
 	u8 remote_mac[ETH_ALEN];
-	char *p = (char *) buf;
-	int i;
 
 	if (nt->enabled) {
 		printk(KERN_ERR "netconsole: target (%s) is enabled, "
@@ -439,23 +437,13 @@ static ssize_t store_remote_mac(struct netconsole_target *nt,
 		return -EINVAL;
 	}
 
-	for (i = 0; i < ETH_ALEN - 1; i++) {
-		remote_mac[i] = simple_strtoul(p, &p, 16);
-		if (*p != ':')
-			goto invalid;
-		p++;
-	}
-	remote_mac[ETH_ALEN - 1] = simple_strtoul(p, &p, 16);
-	if (*p && (*p != '\n'))
-		goto invalid;
-
+	if (!mac_pton(buf, remote_mac))
+		return -EINVAL;
+	if (buf[3 * ETH_ALEN - 1] && buf[3 * ETH_ALEN - 1] != '\n')
+		return -EINVAL;
 	memcpy(nt->np.remote_mac, remote_mac, ETH_ALEN);
 
 	return strnlen(buf, count);
-
-invalid:
-	printk(KERN_ERR "netconsole: invalid input\n");
-	return -EINVAL;
 }
 
 /*
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index be69043d2896..0f1325d98295 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -136,6 +136,7 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
 extern struct ctl_table ether_table[];
 #endif
 
+int mac_pton(const char *s, u8 *mac);
 extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
 
 #endif
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 46d9c3a4de2f..2d7d6d473781 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -698,32 +698,8 @@ int netpoll_parse_options(struct netpoll *np, char *opt)
 
 	if (*cur != 0) {
 		/* MAC address */
-		if ((delim = strchr(cur, ':')) == NULL)
+		if (!mac_pton(cur, np->remote_mac))
 			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[0] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		if ((delim = strchr(cur, ':')) == NULL)
-			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[1] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		if ((delim = strchr(cur, ':')) == NULL)
-			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[2] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		if ((delim = strchr(cur, ':')) == NULL)
-			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[3] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		if ((delim = strchr(cur, ':')) == NULL)
-			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[4] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		np->remote_mac[5] = simple_strtol(cur, NULL, 16);
 	}
 
 	netpoll_print_options(np);
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index d41d88b53e18..379270f14771 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -1420,11 +1420,6 @@ static ssize_t pktgen_if_write(struct file *file,
 		return count;
 	}
 	if (!strcmp(name, "dst_mac")) {
-		char *v = valstr;
-		unsigned char old_dmac[ETH_ALEN];
-		unsigned char *m = pkt_dev->dst_mac;
-		memcpy(old_dmac, pkt_dev->dst_mac, ETH_ALEN);
-
 		len = strn_len(&user_buffer[i], sizeof(valstr) - 1);
 		if (len < 0)
 			return len;
@@ -1432,35 +1427,16 @@ static ssize_t pktgen_if_write(struct file *file,
 		memset(valstr, 0, sizeof(valstr));
 		if (copy_from_user(valstr, &user_buffer[i], len))
 			return -EFAULT;
-		i += len;
-
-		for (*m = 0; *v && m < pkt_dev->dst_mac + 6; v++) {
-			int value;
-
-			value = hex_to_bin(*v);
-			if (value >= 0)
-				*m = *m * 16 + value;
-
-			if (*v == ':') {
-				m++;
-				*m = 0;
-			}
-		}
 
+		if (!mac_pton(valstr, pkt_dev->dst_mac))
+			return -EINVAL;
 		/* Set up Dest MAC */
-		if (compare_ether_addr(old_dmac, pkt_dev->dst_mac))
-			memcpy(&(pkt_dev->hh[0]), pkt_dev->dst_mac, ETH_ALEN);
+		memcpy(&pkt_dev->hh[0], pkt_dev->dst_mac, ETH_ALEN);
 
-		sprintf(pg_result, "OK: dstmac");
+		sprintf(pg_result, "OK: dstmac %pM", pkt_dev->dst_mac);
 		return count;
 	}
 	if (!strcmp(name, "src_mac")) {
-		char *v = valstr;
-		unsigned char old_smac[ETH_ALEN];
-		unsigned char *m = pkt_dev->src_mac;
-
-		memcpy(old_smac, pkt_dev->src_mac, ETH_ALEN);
-
 		len = strn_len(&user_buffer[i], sizeof(valstr) - 1);
 		if (len < 0)
 			return len;
@@ -1468,26 +1444,13 @@ static ssize_t pktgen_if_write(struct file *file,
 		memset(valstr, 0, sizeof(valstr));
 		if (copy_from_user(valstr, &user_buffer[i], len))
 			return -EFAULT;
-		i += len;
-
-		for (*m = 0; *v && m < pkt_dev->src_mac + 6; v++) {
-			int value;
-
-			value = hex_to_bin(*v);
-			if (value >= 0)
-				*m = *m * 16 + value;
-
-			if (*v == ':') {
-				m++;
-				*m = 0;
-			}
-		}
 
+		if (!mac_pton(valstr, pkt_dev->src_mac))
+			return -EINVAL;
 		/* Set up Src MAC */
-		if (compare_ether_addr(old_smac, pkt_dev->src_mac))
-			memcpy(&(pkt_dev->hh[6]), pkt_dev->src_mac, ETH_ALEN);
+		memcpy(&pkt_dev->hh[6], pkt_dev->src_mac, ETH_ALEN);
 
-		sprintf(pg_result, "OK: srcmac");
+		sprintf(pg_result, "OK: srcmac %pM", pkt_dev->src_mac);
 		return count;
 	}
 
diff --git a/net/core/utils.c b/net/core/utils.c
index 5fea0ab21902..2012bc797f9c 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -296,3 +296,27 @@ void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
 				csum_unfold(*sum)));
 }
 EXPORT_SYMBOL(inet_proto_csum_replace4);
+
+int mac_pton(const char *s, u8 *mac)
+{
+	int i;
+
+	/* XX:XX:XX:XX:XX:XX */
+	if (strlen(s) < 3 * ETH_ALEN - 1)
+		return 0;
+
+	/* Don't dirty result unless string is valid MAC. */
+	for (i = 0; i < ETH_ALEN; i++) {
+		if (!strchr("0123456789abcdefABCDEF", s[i * 3]))
+			return 0;
+		if (!strchr("0123456789abcdefABCDEF", s[i * 3 + 1]))
+			return 0;
+		if (i != ETH_ALEN - 1 && s[i * 3 + 2] != ':')
+			return 0;
+	}
+	for (i = 0; i < ETH_ALEN; i++) {
+		mac[i] = (hex_to_bin(s[i * 3]) << 4) | hex_to_bin(s[i * 3 + 1]);
+	}
+	return 1;
+}
+EXPORT_SYMBOL(mac_pton);
-- 
cgit v1.2.3-58-ga151


From 8369ae33b705222aa05ab53c7d6b4458f4ed161b Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 9 May 2011 18:56:46 +0200
Subject: bcma: add Broadcom specific AMBA bus driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Broadcom has released cards based on a new AMBA-based bus type. From a
programming point of view, this new bus type differs from AMBA and does
not use AMBA common registers. It also differs enough from SSB. We
decided that a new bus driver is needed to keep the code clean.

In its current form, the driver detects devices present on the bus and
registers them in the system. It allows registering BCMA drivers for
specified bus devices and provides them basic operations. The bus driver
itself includes two important bus managing drivers: ChipCommon core
driver and PCI(c) core driver. They are early used to allow correct
initialization.

Currently code is limited to supporting buses on PCI(e) devices, however
the driver is designed to be used also on other hosts. The host
abstraction layer is implemented and already used for PCI(e).

Support for PCI(e) hosts is working and seems to be stable (access to
80211 core was tested successfully on a few devices). We can still
optimize it by using some fixed windows, but this can be done later
without affecting any external code. Windows are just ranges in MMIO
used for accessing cores on the bus.

Cc: Greg KH <greg@kroah.com>
Cc: Michael Büsch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: George Kashperko <george@znau.edu.ua>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Botting <andy@andybotting.com>
Cc: linuxdriverproject <devel@linuxdriverproject.org>
Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 Documentation/ABI/testing/sysfs-bus-bcma    |  31 +++
 MAINTAINERS                                 |   7 +
 drivers/Kconfig                             |   2 +
 drivers/Makefile                            |   1 +
 drivers/bcma/Kconfig                        |  33 +++
 drivers/bcma/Makefile                       |   7 +
 drivers/bcma/README                         |  19 ++
 drivers/bcma/TODO                           |   3 +
 drivers/bcma/bcma_private.h                 |  28 +++
 drivers/bcma/core.c                         |  51 ++++
 drivers/bcma/driver_chipcommon.c            |  87 +++++++
 drivers/bcma/driver_chipcommon_pmu.c        | 134 +++++++++++
 drivers/bcma/driver_pci.c                   | 163 +++++++++++++
 drivers/bcma/host_pci.c                     | 196 +++++++++++++++
 drivers/bcma/main.c                         | 247 +++++++++++++++++++
 drivers/bcma/scan.c                         | 360 ++++++++++++++++++++++++++++
 drivers/bcma/scan.h                         |  56 +++++
 include/linux/bcma/bcma.h                   | 224 +++++++++++++++++
 include/linux/bcma/bcma_driver_chipcommon.h | 297 +++++++++++++++++++++++
 include/linux/bcma/bcma_driver_pci.h        |  89 +++++++
 include/linux/bcma/bcma_regs.h              |  34 +++
 include/linux/mod_devicetable.h             |  17 ++
 scripts/mod/file2alias.c                    |  22 ++
 23 files changed, 2108 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-bcma
 create mode 100644 drivers/bcma/Kconfig
 create mode 100644 drivers/bcma/Makefile
 create mode 100644 drivers/bcma/README
 create mode 100644 drivers/bcma/TODO
 create mode 100644 drivers/bcma/bcma_private.h
 create mode 100644 drivers/bcma/core.c
 create mode 100644 drivers/bcma/driver_chipcommon.c
 create mode 100644 drivers/bcma/driver_chipcommon_pmu.c
 create mode 100644 drivers/bcma/driver_pci.c
 create mode 100644 drivers/bcma/host_pci.c
 create mode 100644 drivers/bcma/main.c
 create mode 100644 drivers/bcma/scan.c
 create mode 100644 drivers/bcma/scan.h
 create mode 100644 include/linux/bcma/bcma.h
 create mode 100644 include/linux/bcma/bcma_driver_chipcommon.h
 create mode 100644 include/linux/bcma/bcma_driver_pci.h
 create mode 100644 include/linux/bcma/bcma_regs.h

(limited to 'include/linux')

diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma
new file mode 100644
index 000000000000..06b62badddd1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-bcma
@@ -0,0 +1,31 @@
+What:		/sys/bus/bcma/devices/.../manuf
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core has it's manufacturer id. See
+		include/linux/bcma/bcma.h for possible values.
+
+What:		/sys/bus/bcma/devices/.../id
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		There are a few types of BCMA cores, they can be identified by
+		id field.
+
+What:		/sys/bus/bcma/devices/.../rev
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		BCMA cores of the same type can still slightly differ depending
+		on their revision. Use it for detailed programming.
+
+What:		/sys/bus/bcma/devices/.../class
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core is identified by few fields, including class it
+		belongs to. See include/linux/bcma/bcma.h for possible values.
diff --git a/MAINTAINERS b/MAINTAINERS
index 9f9104987a73..df5585819a62 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5810,6 +5810,13 @@ S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
+BROADCOM SPECIFIC AMBA DRIVER (BCMA)
+M:	Rafał Miłecki <zajec5@gmail.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+F:	drivers/bcma/
+F:	include/linux/bcma/
+
 SONY VAIO CONTROL DEVICE DRIVER
 M:	Mattia Dongili <malattia@linux.it>
 L:	platform-driver-x86@vger.kernel.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d156933..aca706751469 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -68,6 +68,8 @@ source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"
 
+source "drivers/bcma/Kconfig"
+
 source "drivers/mfd/Kconfig"
 
 source "drivers/regulator/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 3f135b6fb014..a29527f4ded6 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_HID)		+= hid/
 obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
+obj-$(CONFIG_BCMA)		+= bcma/
 obj-$(CONFIG_VHOST_NET)		+= vhost/
 obj-$(CONFIG_VLYNQ)		+= vlynq/
 obj-$(CONFIG_STAGING)		+= staging/
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
new file mode 100644
index 000000000000..353781b5b78b
--- /dev/null
+++ b/drivers/bcma/Kconfig
@@ -0,0 +1,33 @@
+config BCMA_POSSIBLE
+	bool
+	depends on HAS_IOMEM && HAS_DMA
+	default y
+
+menu "Broadcom specific AMBA"
+	depends on BCMA_POSSIBLE
+
+config BCMA
+	tristate "BCMA support"
+	depends on BCMA_POSSIBLE
+	help
+	  Bus driver for Broadcom specific Advanced Microcontroller Bus
+	  Architecture.
+
+config BCMA_HOST_PCI_POSSIBLE
+	bool
+	depends on BCMA && PCI = y
+	default y
+
+config BCMA_HOST_PCI
+	bool "Support for BCMA on PCI-host bus"
+	depends on BCMA_HOST_PCI_POSSIBLE
+
+config BCMA_DEBUG
+	bool "BCMA debugging"
+	depends on BCMA
+	help
+	  This turns on additional debugging messages.
+
+	  If unsure, say N
+
+endmenu
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
new file mode 100644
index 000000000000..0d56245bcb79
--- /dev/null
+++ b/drivers/bcma/Makefile
@@ -0,0 +1,7 @@
+bcma-y					+= main.o scan.o core.o
+bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
+bcma-y					+= driver_pci.o
+bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
+obj-$(CONFIG_BCMA)			+= bcma.o
+
+ccflags-$(CONFIG_BCMA_DEBUG)		:= -DDEBUG
diff --git a/drivers/bcma/README b/drivers/bcma/README
new file mode 100644
index 000000000000..f7e7ce46c603
--- /dev/null
+++ b/drivers/bcma/README
@@ -0,0 +1,19 @@
+Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
+however from programming point of view there is nothing AMBA specific we use.
+
+Standard AMBA drivers are platform specific, have hardcoded addresses and use
+AMBA standard fields like CID and PID.
+
+In case of Broadcom's cards every device consists of:
+1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
+   as standard AMBA device. Reading it's CID or PID can cause machine lockup.
+2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
+   and PIDs (0x103BB369), but we do not use that info for anything. One of that
+   devices is used for managing Broadcom specific core.
+
+Addresses of AMBA devices are not hardcoded in driver and have to be read from
+EPROM.
+
+In this situation we decided to introduce separated bus. It can contain up to
+16 devices identified by Broadcom specific fields: manufacturer, id, revision
+and class.
diff --git a/drivers/bcma/TODO b/drivers/bcma/TODO
new file mode 100644
index 000000000000..da7aa99fe81c
--- /dev/null
+++ b/drivers/bcma/TODO
@@ -0,0 +1,3 @@
+- Interrupts
+- Defines for PCI core driver
+- Create kernel Documentation (use info from README)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
new file mode 100644
index 000000000000..2f72e9c585fd
--- /dev/null
+++ b/drivers/bcma/bcma_private.h
@@ -0,0 +1,28 @@
+#ifndef LINUX_BCMA_PRIVATE_H_
+#define LINUX_BCMA_PRIVATE_H_
+
+#ifndef pr_fmt
+#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
+#endif
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+
+#define BCMA_CORE_SIZE		0x1000
+
+struct bcma_bus;
+
+/* main.c */
+extern int bcma_bus_register(struct bcma_bus *bus);
+extern void bcma_bus_unregister(struct bcma_bus *bus);
+
+/* scan.c */
+int bcma_bus_scan(struct bcma_bus *bus);
+
+#ifdef CONFIG_BCMA_HOST_PCI
+/* host_pci.c */
+extern int __init bcma_host_pci_init(void);
+extern void __exit bcma_host_pci_exit(void);
+#endif /* CONFIG_BCMA_HOST_PCI */
+
+#endif
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
new file mode 100644
index 000000000000..ced379f7b371
--- /dev/null
+++ b/drivers/bcma/core.c
@@ -0,0 +1,51 @@
+/*
+ * Broadcom specific AMBA
+ * Core ops
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+bool bcma_core_is_enabled(struct bcma_device *core)
+{
+	if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+	    != BCMA_IOCTL_CLK)
+		return false;
+	if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+		return false;
+	return true;
+}
+EXPORT_SYMBOL_GPL(bcma_core_is_enabled);
+
+static void bcma_core_disable(struct bcma_device *core, u32 flags)
+{
+	if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+		return;
+
+	bcma_awrite32(core, BCMA_IOCTL, flags);
+	bcma_aread32(core, BCMA_IOCTL);
+	udelay(10);
+
+	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	udelay(1);
+}
+
+int bcma_core_enable(struct bcma_device *core, u32 flags)
+{
+	bcma_core_disable(core, flags);
+
+	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags));
+	bcma_aread32(core, BCMA_IOCTL);
+
+	bcma_awrite32(core, BCMA_RESET_CTL, 0);
+	udelay(1);
+
+	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+	bcma_aread32(core, BCMA_IOCTL);
+	udelay(1);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_core_enable);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
new file mode 100644
index 000000000000..caf596091d4d
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon.c
@@ -0,0 +1,87 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+					 u32 mask, u32 value)
+{
+	value &= mask;
+	value |= bcma_cc_read32(cc, offset) & ~mask;
+	bcma_cc_write32(cc, offset, value);
+
+	return value;
+}
+
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+{
+	if (cc->core->id.rev >= 11)
+		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+	if (cc->core->id.rev >= 35)
+		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+
+	bcma_cc_write32(cc, 0x58, 0);
+	bcma_cc_write32(cc, 0x5C, 0);
+
+	if (cc->capabilities & BCMA_CC_CAP_PMU)
+		bcma_pmu_init(cc);
+	if (cc->capabilities & BCMA_CC_CAP_PCTL)
+		pr_err("Power control not implemented!\n");
+}
+
+/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+{
+	/* instant NMI */
+	bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+}
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value);
+}
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask)
+{
+	return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask;
+}
+
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
+{
+	return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
+}
+
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+}
+
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+}
+
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+}
+
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+}
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
new file mode 100644
index 000000000000..f44177a644c7
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -0,0 +1,134 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+					u32 offset, u32 mask, u32 set)
+{
+	u32 value;
+
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+	value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+	value &= mask;
+	value |= set;
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+}
+
+static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+	case 0x4331:
+	case 43224:
+	case 43225:
+		break;
+	default:
+		pr_err("PLL init unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+}
+
+static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	u32 min_msk = 0, max_msk = 0;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+		min_msk = 0x200D;
+		max_msk = 0xFFFF;
+		break;
+	case 43224:
+		break;
+	default:
+		pr_err("PMU resource config unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+
+	/* Set the resource masks. */
+	if (min_msk)
+		bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
+	if (max_msk)
+		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+}
+
+void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+	case 0x4331:
+	case 43224:
+		break;
+	default:
+		pr_err("PMU switch/regulators init unknown for device "
+			"0x%04X\n", bus->chipinfo.id);
+	}
+}
+
+void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
+		break;
+	case 0x4331:
+		pr_err("Enabling Ext PA lines not implemented\n");
+		break;
+	case 43224:
+		if (bus->chipinfo.rev == 0) {
+			pr_err("Workarounds for 43224 rev 0 not fully "
+				"implemented\n");
+			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+		} else {
+			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+		}
+		break;
+	default:
+		pr_err("Workarounds unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+}
+
+void bcma_pmu_init(struct bcma_drv_cc *cc)
+{
+	u32 pmucap;
+
+	pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
+	cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
+
+	pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
+		 pmucap);
+
+	if (cc->pmu.rev == 1)
+		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+			      ~BCMA_CC_PMU_CTL_NOILPONW);
+	else
+		bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+			     BCMA_CC_PMU_CTL_NOILPONW);
+
+	if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
+		pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
+
+	bcma_pmu_pll_init(cc);
+	bcma_pmu_resources_init(cc);
+	bcma_pmu_swreg_init(cc);
+	bcma_pmu_workarounds(cc);
+}
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
new file mode 100644
index 000000000000..b98b8359bef5
--- /dev/null
+++ b/drivers/bcma/driver_pci.c
@@ -0,0 +1,163 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Core
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+/**************************************************
+ * R/W ops.
+ **************************************************/
+
+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
+{
+	pcicore_write32(pc, 0x130, address);
+	pcicore_read32(pc, 0x130);
+	return pcicore_read32(pc, 0x134);
+}
+
+#if 0
+static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
+{
+	pcicore_write32(pc, 0x130, address);
+	pcicore_read32(pc, 0x130);
+	pcicore_write32(pc, 0x134, data);
+}
+#endif
+
+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	u32 v;
+	int i;
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 17); /* Turnaround */
+	v |= (0x1F << 18);
+	v |= (phy << 4);
+	pcicore_write32(pc, mdio_data, v);
+
+	udelay(10);
+	for (i = 0; i < 200; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */)
+			break;
+		msleep(1);
+	}
+}
+
+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	int max_retries = 10;
+	u16 ret = 0;
+	u32 v;
+	int i;
+
+	v = 0x80; /* Enable Preamble Sequence */
+	v |= 0x2; /* MDIO Clock Divisor */
+	pcicore_write32(pc, mdio_control, v);
+
+	if (pc->core->id.rev >= 10) {
+		max_retries = 200;
+		bcma_pcie_mdio_set_phy(pc, device);
+	}
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 29); /* Read Transaction */
+	v |= (1 << 17); /* Turnaround */
+	if (pc->core->id.rev < 10)
+		v |= (u32)device << 22;
+	v |= (u32)address << 18;
+	pcicore_write32(pc, mdio_data, v);
+	/* Wait for the device to complete the transaction */
+	udelay(10);
+	for (i = 0; i < 200; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */) {
+			udelay(10);
+			ret = pcicore_read32(pc, mdio_data);
+			break;
+		}
+		msleep(1);
+	}
+	pcicore_write32(pc, mdio_control, 0);
+	return ret;
+}
+
+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
+				u8 address, u16 data)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	int max_retries = 10;
+	u32 v;
+	int i;
+
+	v = 0x80; /* Enable Preamble Sequence */
+	v |= 0x2; /* MDIO Clock Divisor */
+	pcicore_write32(pc, mdio_control, v);
+
+	if (pc->core->id.rev >= 10) {
+		max_retries = 200;
+		bcma_pcie_mdio_set_phy(pc, device);
+	}
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 17); /* Turnaround */
+	if (pc->core->id.rev < 10)
+		v |= (u32)device << 22;
+	v |= (u32)address << 18;
+	v |= data;
+	pcicore_write32(pc, mdio_data, v);
+	/* Wait for the device to complete the transaction */
+	udelay(10);
+	for (i = 0; i < max_retries; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */)
+			break;
+		msleep(1);
+	}
+	pcicore_write32(pc, mdio_control, 0);
+}
+
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
+{
+	return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
+{
+	const u8 serdes_pll_device = 0x1D;
+	const u8 serdes_rx_device = 0x1F;
+	u16 tmp;
+
+	bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+			      bcma_pcicore_polarity_workaround(pc));
+	tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+	if (tmp & 0x4000)
+		bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+/**************************************************
+ * Init.
+ **************************************************/
+
+void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+	bcma_pcicore_serdes_workaround(pc);
+}
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
new file mode 100644
index 000000000000..99dd36e8500b
--- /dev/null
+++ b/drivers/bcma/host_pci.c
@@ -0,0 +1,196 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+#include <linux/pci.h>
+
+static void bcma_host_pci_switch_core(struct bcma_device *core)
+{
+	pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN,
+			       core->addr);
+	pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
+			       core->wrap);
+	core->bus->mapped_core = core;
+	pr_debug("Switched to core: 0x%X\n", core->id.id);
+}
+
+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread8(core->bus->mmio + offset);
+}
+
+static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread16(core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread32(core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
+				 u8 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite8(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
+				 u16 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite16(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
+				 u32 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite32(value, core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset,
+				  u32 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+const struct bcma_host_ops bcma_host_pci_ops = {
+	.read8		= bcma_host_pci_read8,
+	.read16		= bcma_host_pci_read16,
+	.read32		= bcma_host_pci_read32,
+	.write8		= bcma_host_pci_write8,
+	.write16	= bcma_host_pci_write16,
+	.write32	= bcma_host_pci_write32,
+	.aread32	= bcma_host_pci_aread32,
+	.awrite32	= bcma_host_pci_awrite32,
+};
+
+static int bcma_host_pci_probe(struct pci_dev *dev,
+			     const struct pci_device_id *id)
+{
+	struct bcma_bus *bus;
+	int err = -ENOMEM;
+	const char *name;
+	u32 val;
+
+	/* Alloc */
+	bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		goto out;
+
+	/* Basic PCI configuration */
+	err = pci_enable_device(dev);
+	if (err)
+		goto err_kfree_bus;
+
+	name = dev_name(&dev->dev);
+	if (dev->driver && dev->driver->name)
+		name = dev->driver->name;
+	err = pci_request_regions(dev, name);
+	if (err)
+		goto err_pci_disable;
+	pci_set_master(dev);
+
+	/* Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_read_config_dword(dev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
+	/* SSB needed additional powering up, do we have any AMBA PCI cards? */
+	if (!pci_is_pcie(dev))
+		pr_err("PCI card detected, report problems.\n");
+
+	/* Map MMIO */
+	err = -ENOMEM;
+	bus->mmio = pci_iomap(dev, 0, ~0UL);
+	if (!bus->mmio)
+		goto err_pci_release_regions;
+
+	/* Host specific */
+	bus->host_pci = dev;
+	bus->hosttype = BCMA_HOSTTYPE_PCI;
+	bus->ops = &bcma_host_pci_ops;
+
+	/* Register */
+	err = bcma_bus_register(bus);
+	if (err)
+		goto err_pci_unmap_mmio;
+
+	pci_set_drvdata(dev, bus);
+
+out:
+	return err;
+
+err_pci_unmap_mmio:
+	pci_iounmap(dev, bus->mmio);
+err_pci_release_regions:
+	pci_release_regions(dev);
+err_pci_disable:
+	pci_disable_device(dev);
+err_kfree_bus:
+	kfree(bus);
+	return err;
+}
+
+static void bcma_host_pci_remove(struct pci_dev *dev)
+{
+	struct bcma_bus *bus = pci_get_drvdata(dev);
+
+	bcma_bus_unregister(bus);
+	pci_iounmap(dev, bus->mmio);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	kfree(bus);
+	pci_set_drvdata(dev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
+
+static struct pci_driver bcma_pci_bridge_driver = {
+	.name = "bcma-pci-bridge",
+	.id_table = bcma_pci_bridge_tbl,
+	.probe = bcma_host_pci_probe,
+	.remove = bcma_host_pci_remove,
+};
+
+int __init bcma_host_pci_init(void)
+{
+	return pci_register_driver(&bcma_pci_bridge_driver);
+}
+
+void __exit bcma_host_pci_exit(void)
+{
+	pci_unregister_driver(&bcma_pci_bridge_driver);
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
new file mode 100644
index 000000000000..be52344ed19d
--- /dev/null
+++ b/drivers/bcma/main.c
@@ -0,0 +1,247 @@
+/*
+ * Broadcom specific AMBA
+ * Bus subsystem
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+MODULE_LICENSE("GPL");
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv);
+static int bcma_device_probe(struct device *dev);
+static int bcma_device_remove(struct device *dev);
+
+static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%03X\n", core->id.manuf);
+}
+static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%03X\n", core->id.id);
+}
+static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%02X\n", core->id.rev);
+}
+static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%X\n", core->id.class);
+}
+static struct device_attribute bcma_device_attrs[] = {
+	__ATTR_RO(manuf),
+	__ATTR_RO(id),
+	__ATTR_RO(rev),
+	__ATTR_RO(class),
+	__ATTR_NULL,
+};
+
+static struct bus_type bcma_bus_type = {
+	.name		= "bcma",
+	.match		= bcma_bus_match,
+	.probe		= bcma_device_probe,
+	.remove		= bcma_device_remove,
+	.dev_attrs	= bcma_device_attrs,
+};
+
+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->id.id == coreid)
+			return core;
+	}
+	return NULL;
+}
+
+static void bcma_release_core_dev(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	kfree(core);
+}
+
+static int bcma_register_cores(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+	int err, dev_id = 0;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		/* We support that cores ourself */
+		switch (core->id.id) {
+		case BCMA_CORE_CHIPCOMMON:
+		case BCMA_CORE_PCI:
+		case BCMA_CORE_PCIE:
+			continue;
+		}
+
+		core->dev.release = bcma_release_core_dev;
+		core->dev.bus = &bcma_bus_type;
+		dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
+
+		switch (bus->hosttype) {
+		case BCMA_HOSTTYPE_PCI:
+			core->dev.parent = &bus->host_pci->dev;
+			break;
+		case BCMA_HOSTTYPE_NONE:
+		case BCMA_HOSTTYPE_SDIO:
+			break;
+		}
+
+		err = device_register(&core->dev);
+		if (err) {
+			pr_err("Could not register dev for core 0x%03X\n",
+			       core->id.id);
+			continue;
+		}
+		core->dev_registered = true;
+		dev_id++;
+	}
+
+	return 0;
+}
+
+static void bcma_unregister_cores(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->dev_registered)
+			device_unregister(&core->dev);
+	}
+}
+
+int bcma_bus_register(struct bcma_bus *bus)
+{
+	int err;
+	struct bcma_device *core;
+
+	/* Scan for devices (cores) */
+	err = bcma_bus_scan(bus);
+	if (err) {
+		pr_err("Failed to scan: %d\n", err);
+		return -1;
+	}
+
+	/* Init CC core */
+	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+	if (core) {
+		bus->drv_cc.core = core;
+		bcma_core_chipcommon_init(&bus->drv_cc);
+	}
+
+	/* Init PCIE core */
+	core = bcma_find_core(bus, BCMA_CORE_PCIE);
+	if (core) {
+		bus->drv_pci.core = core;
+		bcma_core_pci_init(&bus->drv_pci);
+	}
+
+	/* Register found cores */
+	bcma_register_cores(bus);
+
+	pr_info("Bus registered\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_bus_register);
+
+void bcma_bus_unregister(struct bcma_bus *bus)
+{
+	bcma_unregister_cores(bus);
+}
+EXPORT_SYMBOL_GPL(bcma_bus_unregister);
+
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
+{
+	drv->drv.name = drv->name;
+	drv->drv.bus = &bcma_bus_type;
+	drv->drv.owner = owner;
+
+	return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(__bcma_driver_register);
+
+void bcma_driver_unregister(struct bcma_driver *drv)
+{
+	driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(bcma_driver_unregister);
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
+	const struct bcma_device_id *cid = &core->id;
+	const struct bcma_device_id *did;
+
+	for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) {
+	    if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) &&
+		(did->id == cid->id || did->id == BCMA_ANY_ID) &&
+		(did->rev == cid->rev || did->rev == BCMA_ANY_REV) &&
+		(did->class == cid->class || did->class == BCMA_ANY_CLASS))
+			return 1;
+	}
+	return 0;
+}
+
+static int bcma_device_probe(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+					       drv);
+	int err = 0;
+
+	if (adrv->probe)
+		err = adrv->probe(core);
+
+	return err;
+}
+
+static int bcma_device_remove(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+					       drv);
+
+	if (adrv->remove)
+		adrv->remove(core);
+
+	return 0;
+}
+
+static int __init bcma_modinit(void)
+{
+	int err;
+
+	err = bus_register(&bcma_bus_type);
+	if (err)
+		return err;
+
+#ifdef CONFIG_BCMA_HOST_PCI
+	err = bcma_host_pci_init();
+	if (err) {
+		pr_err("PCI host initialization failed\n");
+		err = 0;
+	}
+#endif
+
+	return err;
+}
+fs_initcall(bcma_modinit);
+
+static void __exit bcma_modexit(void)
+{
+#ifdef CONFIG_BCMA_HOST_PCI
+	bcma_host_pci_exit();
+#endif
+	bus_unregister(&bcma_bus_type);
+}
+module_exit(bcma_modexit)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
new file mode 100644
index 000000000000..40d7dcce8933
--- /dev/null
+++ b/drivers/bcma/scan.c
@@ -0,0 +1,360 @@
+/*
+ * Broadcom specific AMBA
+ * Bus scanning
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "scan.h"
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct bcma_device_id_name {
+	u16 id;
+	const char *name;
+};
+struct bcma_device_id_name bcma_device_names[] = {
+	{ BCMA_CORE_OOB_ROUTER, "OOB Router" },
+	{ BCMA_CORE_INVALID, "Invalid" },
+	{ BCMA_CORE_CHIPCOMMON, "ChipCommon" },
+	{ BCMA_CORE_ILINE20, "ILine 20" },
+	{ BCMA_CORE_SRAM, "SRAM" },
+	{ BCMA_CORE_SDRAM, "SDRAM" },
+	{ BCMA_CORE_PCI, "PCI" },
+	{ BCMA_CORE_MIPS, "MIPS" },
+	{ BCMA_CORE_ETHERNET, "Fast Ethernet" },
+	{ BCMA_CORE_V90, "V90" },
+	{ BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
+	{ BCMA_CORE_ADSL, "ADSL" },
+	{ BCMA_CORE_ILINE100, "ILine 100" },
+	{ BCMA_CORE_IPSEC, "IPSEC" },
+	{ BCMA_CORE_UTOPIA, "UTOPIA" },
+	{ BCMA_CORE_PCMCIA, "PCMCIA" },
+	{ BCMA_CORE_INTERNAL_MEM, "Internal Memory" },
+	{ BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" },
+	{ BCMA_CORE_OFDM, "OFDM" },
+	{ BCMA_CORE_EXTIF, "EXTIF" },
+	{ BCMA_CORE_80211, "IEEE 802.11" },
+	{ BCMA_CORE_PHY_A, "PHY A" },
+	{ BCMA_CORE_PHY_B, "PHY B" },
+	{ BCMA_CORE_PHY_G, "PHY G" },
+	{ BCMA_CORE_MIPS_3302, "MIPS 3302" },
+	{ BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
+	{ BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
+	{ BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
+	{ BCMA_CORE_USB20_DEV, "USB 2.0 Device" },
+	{ BCMA_CORE_SDIO_HOST, "SDIO Host" },
+	{ BCMA_CORE_ROBOSWITCH, "Roboswitch" },
+	{ BCMA_CORE_PARA_ATA, "PATA" },
+	{ BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" },
+	{ BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" },
+	{ BCMA_CORE_PCIE, "PCIe" },
+	{ BCMA_CORE_PHY_N, "PHY N" },
+	{ BCMA_CORE_SRAM_CTL, "SRAM Controller" },
+	{ BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
+	{ BCMA_CORE_ARM_1176, "ARM 1176" },
+	{ BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+	{ BCMA_CORE_PHY_LP, "PHY LP" },
+	{ BCMA_CORE_PMU, "PMU" },
+	{ BCMA_CORE_PHY_SSN, "PHY SSN" },
+	{ BCMA_CORE_SDIO_DEV, "SDIO Device" },
+	{ BCMA_CORE_ARM_CM3, "ARM CM3" },
+	{ BCMA_CORE_PHY_HT, "PHY HT" },
+	{ BCMA_CORE_MIPS_74K, "MIPS 74K" },
+	{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
+	{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
+	{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
+	{ BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" },
+	{ BCMA_CORE_SHARED_COMMON, "Common Shared" },
+	{ BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" },
+	{ BCMA_CORE_SPI_HOST, "SPI Host" },
+	{ BCMA_CORE_I2S, "I2S" },
+	{ BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+	{ BCMA_CORE_SHIM, "SHIM" },
+	{ BCMA_CORE_DEFAULT, "Default" },
+};
+const char *bcma_device_name(struct bcma_device_id *id)
+{
+	int i;
+
+	if (id->manuf == BCMA_MANUF_BCM) {
+		for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
+			if (bcma_device_names[i].id == id->id)
+				return bcma_device_names[i].name;
+		}
+	}
+	return "UNKNOWN";
+}
+
+static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx,
+		       u16 offset)
+{
+	return readl(bus->mmio + offset);
+}
+
+static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
+{
+	if (bus->hosttype == BCMA_HOSTTYPE_PCI)
+		pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN,
+				       addr);
+}
+
+static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = readl(*eromptr);
+	(*eromptr)++;
+	return ent;
+}
+
+static void bcma_erom_push_ent(u32 **eromptr)
+{
+	(*eromptr)--;
+}
+
+static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if (!(ent & SCAN_ER_VALID))
+		return -ENOENT;
+	if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI)
+		return -ENOENT;
+	return ent;
+}
+
+static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	bcma_erom_push_ent(eromptr);
+	return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+}
+
+static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	bcma_erom_push_ent(eromptr);
+	return (((ent & SCAN_ER_VALID)) &&
+		((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) &&
+		((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+}
+
+static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent;
+	while (1) {
+		ent = bcma_erom_get_ent(bus, eromptr);
+		if ((ent & SCAN_ER_VALID) &&
+		    ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI))
+			break;
+		if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID))
+			break;
+	}
+	bcma_erom_push_ent(eromptr);
+}
+
+static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if (!(ent & SCAN_ER_VALID))
+		return -ENOENT;
+	if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP)
+		return -ENOENT;
+	return ent;
+}
+
+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
+				  u32 type, u8 port)
+{
+	u32 addrl, addrh, sizel, sizeh = 0;
+	u32 size;
+
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if ((!(ent & SCAN_ER_VALID)) ||
+	    ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) ||
+	    ((ent & SCAN_ADDR_TYPE) != type) ||
+	    (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
+		bcma_erom_push_ent(eromptr);
+		return -EINVAL;
+	}
+
+	addrl = ent & SCAN_ADDR_ADDR;
+	if (ent & SCAN_ADDR_AG32)
+		addrh = bcma_erom_get_ent(bus, eromptr);
+	else
+		addrh = 0;
+
+	if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) {
+		size = bcma_erom_get_ent(bus, eromptr);
+		sizel = size & SCAN_SIZE_SZ;
+		if (size & SCAN_SIZE_SG32)
+			sizeh = bcma_erom_get_ent(bus, eromptr);
+	} else
+		sizel = SCAN_ADDR_SZ_BASE <<
+				((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT);
+
+	return addrl;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+	u32 erombase;
+	u32 __iomem *eromptr, *eromend;
+
+	s32 cia, cib;
+	u8 ports[2], wrappers[2];
+
+	s32 tmp;
+	u8 i, j;
+
+	int err;
+
+	INIT_LIST_HEAD(&bus->cores);
+	bus->nr_cores = 0;
+
+	bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
+
+	tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
+	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+
+	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+	eromptr = bus->mmio;
+	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+	bcma_scan_switch_core(bus, erombase);
+
+	while (eromptr < eromend) {
+		struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
+		if (!core)
+			return -ENOMEM;
+		INIT_LIST_HEAD(&core->list);
+		core->bus = bus;
+
+		/* get CIs */
+		cia = bcma_erom_get_ci(bus, &eromptr);
+		if (cia < 0) {
+			bcma_erom_push_ent(&eromptr);
+			if (bcma_erom_is_end(bus, &eromptr))
+				break;
+			err= -EILSEQ;
+			goto out;
+		}
+		cib = bcma_erom_get_ci(bus, &eromptr);
+		if (cib < 0) {
+			err= -EILSEQ;
+			goto out;
+		}
+
+		/* parse CIs */
+		core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+		core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+		core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+		ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+		ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+		wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+		wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+		core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+		if (((core->id.manuf == BCMA_MANUF_ARM) &&
+		     (core->id.id == 0xFFF)) ||
+		    (ports[1] == 0)) {
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		/* check if component is a core at all */
+		if (wrappers[0] + wrappers[1] == 0) {
+			/* we could save addrl of the router
+			if (cid == BCMA_CORE_OOB_ROUTER)
+			 */
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		if (bcma_erom_is_bridge(bus, &eromptr)) {
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		/* get & parse master ports */
+		for (i = 0; i < ports[0]; i++) {
+			u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
+			if (mst_port_d < 0) {
+				err= -EILSEQ;
+				goto out;
+			}
+		}
+
+		/* get & parse slave ports */
+		for (i = 0; i < ports[1]; i++) {
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_SLAVE, i);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: slave port %d "
+					 * "has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (i == 0 && j == 0)
+						core->addr = tmp;
+				}
+			}
+		}
+
+		/* get & parse master wrappers */
+		for (i = 0; i < wrappers[0]; i++) {
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_MWRAP, i);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: master wrapper %d "
+					 * "has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (i == 0 && j == 0)
+						core->wrap = tmp;
+				}
+			}
+		}
+
+		/* get & parse slave wrappers */
+		for (i = 0; i < wrappers[1]; i++) {
+			u8 hack = (ports[1] == 1) ? 0 : 1;
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_SWRAP, i + hack);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: master wrapper %d "
+					 * has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (wrappers[0] == 0 && !i && !j)
+						core->wrap = tmp;
+				}
+			}
+		}
+
+		pr_info("Core %d found: %s "
+			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+			bus->nr_cores, bcma_device_name(&core->id),
+			core->id.manuf, core->id.id, core->id.rev,
+			core->id.class);
+
+		core->core_index = bus->nr_cores++;
+		list_add(&core->list, &bus->cores);
+		continue;
+out:
+		return err;
+	}
+
+	return 0;
+}
diff --git a/drivers/bcma/scan.h b/drivers/bcma/scan.h
new file mode 100644
index 000000000000..113e6a66884c
--- /dev/null
+++ b/drivers/bcma/scan.h
@@ -0,0 +1,56 @@
+#ifndef BCMA_SCAN_H_
+#define BCMA_SCAN_H_
+
+#define BCMA_ADDR_BASE		0x18000000
+#define BCMA_WRAP_BASE		0x18100000
+
+#define SCAN_ER_VALID		0x00000001
+#define SCAN_ER_TAGX		0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */
+#define SCAN_ER_TAG		0x0000000E
+#define  SCAN_ER_TAG_CI		0x00000000
+#define  SCAN_ER_TAG_MP		0x00000002
+#define  SCAN_ER_TAG_ADDR	0x00000004
+#define  SCAN_ER_TAG_END	0x0000000E
+#define SCAN_ER_BAD		0xFFFFFFFF
+
+#define SCAN_CIA_CLASS		0x000000F0
+#define SCAN_CIA_CLASS_SHIFT	4
+#define SCAN_CIA_ID		0x000FFF00
+#define SCAN_CIA_ID_SHIFT	8
+#define SCAN_CIA_MANUF		0xFFF00000
+#define SCAN_CIA_MANUF_SHIFT	20
+
+#define SCAN_CIB_NMP		0x000001F0
+#define SCAN_CIB_NMP_SHIFT	4
+#define SCAN_CIB_NSP		0x00003E00
+#define SCAN_CIB_NSP_SHIFT	9
+#define SCAN_CIB_NMW		0x0007C000
+#define SCAN_CIB_NMW_SHIFT	14
+#define SCAN_CIB_NSW		0x00F80000
+#define SCAN_CIB_NSW_SHIFT	17
+#define SCAN_CIB_REV		0xFF000000
+#define SCAN_CIB_REV_SHIFT	24
+
+#define SCAN_ADDR_AG32		0x00000008
+#define SCAN_ADDR_SZ		0x00000030
+#define SCAN_ADDR_SZ_SHIFT	4
+#define  SCAN_ADDR_SZ_4K	0x00000000
+#define  SCAN_ADDR_SZ_8K	0x00000010
+#define  SCAN_ADDR_SZ_16K	0x00000020
+#define  SCAN_ADDR_SZ_SZD	0x00000030
+#define SCAN_ADDR_TYPE		0x000000C0
+#define  SCAN_ADDR_TYPE_SLAVE	0x00000000
+#define  SCAN_ADDR_TYPE_BRIDGE	0x00000040
+#define  SCAN_ADDR_TYPE_SWRAP	0x00000080
+#define  SCAN_ADDR_TYPE_MWRAP	0x000000C0
+#define SCAN_ADDR_PORT		0x00000F00
+#define SCAN_ADDR_PORT_SHIFT	8
+#define SCAN_ADDR_ADDR		0xFFFFF000
+
+#define SCAN_ADDR_SZ_BASE	0x00001000	/* 4KB */
+
+#define SCAN_SIZE_SZ_ALIGN	0x00000FFF
+#define SCAN_SIZE_SZ		0xFFFFF000
+#define SCAN_SIZE_SG32		0x00000008
+
+#endif /* BCMA_SCAN_H_ */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
new file mode 100644
index 000000000000..08763e4e848f
--- /dev/null
+++ b/include/linux/bcma/bcma.h
@@ -0,0 +1,224 @@
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+	BCMA_HOSTTYPE_NONE,
+	BCMA_HOSTTYPE_PCI,
+	BCMA_HOSTTYPE_SDIO,
+};
+
+struct bcma_chipinfo {
+	u16 id;
+	u8 rev;
+	u8 pkg;
+};
+
+struct bcma_host_ops {
+	u8 (*read8)(struct bcma_device *core, u16 offset);
+	u16 (*read16)(struct bcma_device *core, u16 offset);
+	u32 (*read32)(struct bcma_device *core, u16 offset);
+	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+	/* Agent ops */
+	u32 (*aread32)(struct bcma_device *core, u16 offset);
+	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM			0x43B
+#define BCMA_MANUF_MIPS			0x4A7
+#define BCMA_MANUF_BCM			0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM			0x0
+#define BCMA_CL_EROM			0x1
+#define BCMA_CL_CORESIGHT		0x9
+#define BCMA_CL_VERIF			0xB
+#define BCMA_CL_OPTIMO			0xD
+#define BCMA_CL_GEN			0xE
+#define BCMA_CL_PRIMECELL		0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_INVALID		0x700
+#define BCMA_CORE_CHIPCOMMON		0x800
+#define BCMA_CORE_ILINE20		0x801
+#define BCMA_CORE_SRAM			0x802
+#define BCMA_CORE_SDRAM			0x803
+#define BCMA_CORE_PCI			0x804
+#define BCMA_CORE_MIPS			0x805
+#define BCMA_CORE_ETHERNET		0x806
+#define BCMA_CORE_V90			0x807
+#define BCMA_CORE_USB11_HOSTDEV		0x808
+#define BCMA_CORE_ADSL			0x809
+#define BCMA_CORE_ILINE100		0x80A
+#define BCMA_CORE_IPSEC			0x80B
+#define BCMA_CORE_UTOPIA		0x80C
+#define BCMA_CORE_PCMCIA		0x80D
+#define BCMA_CORE_INTERNAL_MEM		0x80E
+#define BCMA_CORE_MEMC_SDRAM		0x80F
+#define BCMA_CORE_OFDM			0x810
+#define BCMA_CORE_EXTIF			0x811
+#define BCMA_CORE_80211			0x812
+#define BCMA_CORE_PHY_A			0x813
+#define BCMA_CORE_PHY_B			0x814
+#define BCMA_CORE_PHY_G			0x815
+#define BCMA_CORE_MIPS_3302		0x816
+#define BCMA_CORE_USB11_HOST		0x817
+#define BCMA_CORE_USB11_DEV		0x818
+#define BCMA_CORE_USB20_HOST		0x819
+#define BCMA_CORE_USB20_DEV		0x81A
+#define BCMA_CORE_SDIO_HOST		0x81B
+#define BCMA_CORE_ROBOSWITCH		0x81C
+#define BCMA_CORE_PARA_ATA		0x81D
+#define BCMA_CORE_SATA_XORDMA		0x81E
+#define BCMA_CORE_ETHERNET_GBIT		0x81F
+#define BCMA_CORE_PCIE			0x820
+#define BCMA_CORE_PHY_N			0x821
+#define BCMA_CORE_SRAM_CTL		0x822
+#define BCMA_CORE_MINI_MACPHY		0x823
+#define BCMA_CORE_ARM_1176		0x824
+#define BCMA_CORE_ARM_7TDMI		0x825
+#define BCMA_CORE_PHY_LP		0x826
+#define BCMA_CORE_PMU			0x827
+#define BCMA_CORE_PHY_SSN		0x828
+#define BCMA_CORE_SDIO_DEV		0x829
+#define BCMA_CORE_ARM_CM3		0x82A
+#define BCMA_CORE_PHY_HT		0x82B
+#define BCMA_CORE_MIPS_74K		0x82C
+#define BCMA_CORE_MAC_GBIT		0x82D
+#define BCMA_CORE_DDR12_MEM_CTL		0x82E
+#define BCMA_CORE_PCIE_RC		0x82F	/* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE	0x830
+#define BCMA_CORE_SHARED_COMMON		0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE	0x832
+#define BCMA_CORE_SPI_HOST		0x833
+#define BCMA_CORE_I2S			0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT		0xFFF
+
+#define BCMA_MAX_NR_CORES		16
+
+struct bcma_device {
+	struct bcma_bus *bus;
+	struct bcma_device_id id;
+
+	struct device dev;
+	bool dev_registered;
+
+	u8 core_index;
+
+	u32 addr;
+	u32 wrap;
+
+	void *drvdata;
+	struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+	return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+	core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+	const char *name;
+	const struct bcma_device_id *id_table;
+
+	int (*probe)(struct bcma_device *dev);
+	void (*remove)(struct bcma_device *dev);
+	int (*suspend)(struct bcma_device *dev, pm_message_t state);
+	int (*resume)(struct bcma_device *dev);
+	void (*shutdown)(struct bcma_device *dev);
+
+	struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+static inline int bcma_driver_register(struct bcma_driver *drv)
+{
+	return __bcma_driver_register(drv, THIS_MODULE);
+}
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+struct bcma_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct bcma_host_ops *ops;
+
+	enum bcma_hosttype hosttype;
+	union {
+		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+		struct pci_dev *host_pci;
+		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+		struct sdio_func *host_sdio;
+	};
+
+	struct bcma_chipinfo chipinfo;
+
+	struct bcma_device *mapped_core;
+	struct list_head cores;
+	u8 nr_cores;
+
+	struct bcma_drv_cc drv_cc;
+	struct bcma_drv_pci drv_pci;
+};
+
+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read8(core, offset);
+}
+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read16(core, offset);
+}
+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read32(core, offset);
+}
+extern inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write8(core, offset, value);
+}
+extern inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write16(core, offset, value);
+}
+extern inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write32(core, offset, value);
+}
+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->aread32(core, offset);
+}
+extern inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->awrite32(core, offset, value);
+}
+
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
new file mode 100644
index 000000000000..4f8fd6a4c1e6
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,297 @@
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID			0x0000
+#define  BCMA_CC_ID_ID			0x0000FFFF
+#define  BCMA_CC_ID_ID_SHIFT		0
+#define  BCMA_CC_ID_REV			0x000F0000
+#define  BCMA_CC_ID_REV_SHIFT		16
+#define  BCMA_CC_ID_PKG			0x00F00000
+#define  BCMA_CC_ID_PKG_SHIFT		20
+#define  BCMA_CC_ID_NRCORES		0x0F000000
+#define  BCMA_CC_ID_NRCORES_SHIFT	24
+#define  BCMA_CC_ID_TYPE		0xF0000000
+#define  BCMA_CC_ID_TYPE_SHIFT		28
+#define BCMA_CC_CAP			0x0004		/* Capabilities */
+#define  BCMA_CC_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  BCMA_CC_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  BCMA_CC_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   BCMA_CC_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  BCMA_CC_CAP_UARTGPIO		0x00000020	/* UARTs on GPIO 15-12 */
+#define  BCMA_CC_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  BCMA_CC_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
+#define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
+#define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
+#define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
+#define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
+#define   BCMA_PLLTYPE_NONE		0x00000000
+#define   BCMA_PLLTYPE_1		0x00010000	/* 48Mhz base, 3 dividers */
+#define   BCMA_PLLTYPE_2		0x00020000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_3		0x00030000	/* 25Mhz, 2 dividers */
+#define   BCMA_PLLTYPE_4		0x00008000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_5		0x00018000	/* 25Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_6		0x00028000	/* 100/200 or 120/240 only */
+#define   BCMA_PLLTYPE_7		0x00038000	/* 25Mhz, 4 dividers */
+#define  BCMA_CC_CAP_PCTL		0x00040000	/* Power Control */
+#define  BCMA_CC_CAP_OTPS		0x00380000	/* OTP size */
+#define  BCMA_CC_CAP_OTPS_SHIFT		19
+#define  BCMA_CC_CAP_OTPS_BASE		5
+#define  BCMA_CC_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  BCMA_CC_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  BCMA_CC_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+#define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
+#define BCMA_CC_CORECTL			0x0008
+#define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define  BCMA_CC_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST			0x000C
+#define BCMA_CC_OTPS			0x0010		/* OTP status */
+#define	 BCMA_CC_OTPS_PROGFAIL		0x80000000
+#define	 BCMA_CC_OTPS_PROTECT		0x00000007
+#define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
+#define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
+#define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
+#define BCMA_CC_OTPC			0x0014		/* OTP control */
+#define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
+#define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
+#define	 BCMA_CC_OTPC_PRW_SHIFT		8
+#define	 BCMA_CC_OTPC_MAXFAIL		0x00000038
+#define	 BCMA_CC_OTPC_VSEL		0x00000006
+#define	 BCMA_CC_OTPC_SELVL		0x00000001
+#define BCMA_CC_OTPP			0x0018		/* OTP prog */
+#define	 BCMA_CC_OTPP_COL		0x000000FF
+#define	 BCMA_CC_OTPP_ROW		0x0000FF00
+#define	 BCMA_CC_OTPP_ROW_SHIFT		8
+#define	 BCMA_CC_OTPP_READERR		0x10000000
+#define	 BCMA_CC_OTPP_VALUE		0x20000000
+#define	 BCMA_CC_OTPP_READ		0x40000000
+#define	 BCMA_CC_OTPP_START		0x80000000
+#define	 BCMA_CC_OTPP_BUSY		0x80000000
+#define BCMA_CC_IRQSTAT			0x0020
+#define BCMA_CC_IRQMASK			0x0024
+#define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 BCMA_CC_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+#define  BCMA_CC_JCMD_START		0x80000000
+#define  BCMA_CC_JCMD_BUSY		0x80000000
+#define  BCMA_CC_JCMD_PAUSE		0x40000000
+#define  BCMA_CC_JCMD0_ACC_MASK		0x0000F000
+#define  BCMA_CC_JCMD0_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD0_ACC_DR		0x00001000
+#define  BCMA_CC_JCMD0_ACC_IR		0x00002000
+#define  BCMA_CC_JCMD0_ACC_RESET	0x00003000
+#define  BCMA_CC_JCMD0_ACC_IRPDR	0x00004000
+#define  BCMA_CC_JCMD0_ACC_PDR		0x00005000
+#define  BCMA_CC_JCMD0_IRW_MASK		0x00000F00
+#define  BCMA_CC_JCMD_ACC_MASK		0x000F0000	/* Changes for corerev 11 */
+#define  BCMA_CC_JCMD_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD_ACC_DR		0x00010000
+#define  BCMA_CC_JCMD_ACC_IR		0x00020000
+#define  BCMA_CC_JCMD_ACC_RESET		0x00030000
+#define  BCMA_CC_JCMD_ACC_IRPDR		0x00040000
+#define  BCMA_CC_JCMD_ACC_PDR		0x00050000
+#define  BCMA_CC_JCMD_IRW_MASK		0x00001F00
+#define  BCMA_CC_JCMD_IRW_SHIFT		8
+#define  BCMA_CC_JCMD_DRW_MASK		0x0000003F
+#define BCMA_CC_JIR			0x0034		/* Rev >= 10 only */
+#define BCMA_CC_JDR			0x0038		/* Rev >= 10 only */
+#define BCMA_CC_JCTL			0x003C		/* Rev >= 10 only */
+#define  BCMA_CC_JCTL_FORCE_CLK		4		/* Force clock */
+#define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
+#define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
+#define BCMA_CC_FLASHCTL		0x0040
+#define  BCMA_CC_FLASHCTL_START		0x80000000
+#define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR		0x0044
+#define BCMA_CC_FLASHDATA		0x0048
+#define BCMA_CC_BCAST_ADDR		0x0050
+#define BCMA_CC_BCAST_DATA		0x0054
+#define BCMA_CC_GPIOIN			0x0060
+#define BCMA_CC_GPIOOUT			0x0064
+#define BCMA_CC_GPIOOUTEN		0x0068
+#define BCMA_CC_GPIOCTL			0x006C
+#define BCMA_CC_GPIOPOL			0x0070
+#define BCMA_CC_GPIOIRQ			0x0074
+#define BCMA_CC_WATCHDOG		0x0080
+#define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
+#define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N			0x0090
+#define BCMA_CC_CLOCK_SB		0x0094
+#define BCMA_CC_CLOCK_PCI		0x0098
+#define BCMA_CC_CLOCK_M2		0x009C
+#define BCMA_CC_CLOCK_MIPS		0x00A0
+#define BCMA_CC_CLKDIV			0x00A4		/* Rev >= 3 only */
+#define	 BCMA_CC_CLKDIV_SFLASH		0x0F000000
+#define	 BCMA_CC_CLKDIV_SFLASH_SHIFT	24
+#define	 BCMA_CC_CLKDIV_OTP		0x000F0000
+#define	 BCMA_CC_CLKDIV_OTP_SHIFT	16
+#define	 BCMA_CC_CLKDIV_JTAG		0x00000F00
+#define	 BCMA_CC_CLKDIV_JTAG_SHIFT	8
+#define	 BCMA_CC_CLKDIV_UART		0x000000FF
+#define BCMA_CC_CAP_EXT			0x00AC		/* Capabilities */
+#define BCMA_CC_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  BCMA_CC_SLOWCLKCTL_SRC		0x00000007	/* slow clock source mask */
+#define	  BCMA_CC_SLOWCLKCTL_SRC_LPO	0x00000000	/* source of slow clock is LPO */
+#define   BCMA_CC_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  BCMA_CC_SLOECLKCTL_SRC_PCI	0x00000002	/* source of slow clock is PCI */
+#define  BCMA_CC_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  BCMA_CC_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  BCMA_CC_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  BCMA_CC_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  BCMA_CC_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  BCMA_CC_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 BCMA_CC_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 BCMA_CC_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 BCMA_CC_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 BCMA_CC_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 BCMA_CC_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define BCMA_CC_EROM			0x00FC
+#define BCMA_CC_PCMCIA_CFG		0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT		0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT		0x0108
+#define BCMA_CC_PCMCIA_IOWAIT		0x010C
+#define BCMA_CC_IDE_CFG			0x0110
+#define BCMA_CC_IDE_MEMWAIT		0x0114
+#define BCMA_CC_IDE_ATTRWAIT		0x0118
+#define BCMA_CC_IDE_IOWAIT		0x011C
+#define BCMA_CC_PROG_CFG		0x0120
+#define BCMA_CC_PROG_WAITCNT		0x0124
+#define BCMA_CC_FLASH_CFG		0x0128
+#define BCMA_CC_FLASH_WAITCNT		0x012C
+#define BCMA_CC_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  BCMA_CC_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  BCMA_CC_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  BCMA_CC_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  BCMA_CC_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  BCMA_CC_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  BCMA_CC_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  BCMA_CC_CLKCTLST_HAVEHT	0x00010000 /* HT available */
+#define  BCMA_CC_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA		0x0300
+#define BCMA_CC_UART0_IMR		0x0304
+#define BCMA_CC_UART0_FCR		0x0308
+#define BCMA_CC_UART0_LCR		0x030C
+#define BCMA_CC_UART0_MCR		0x0310
+#define BCMA_CC_UART0_LSR		0x0314
+#define BCMA_CC_UART0_MSR		0x0318
+#define BCMA_CC_UART0_SCRATCH		0x031C
+#define BCMA_CC_UART1_DATA		0x0400
+#define BCMA_CC_UART1_IMR		0x0404
+#define BCMA_CC_UART1_FCR		0x0408
+#define BCMA_CC_UART1_LCR		0x040C
+#define BCMA_CC_UART1_MCR		0x0410
+#define BCMA_CC_UART1_LSR		0x0414
+#define BCMA_CC_UART1_MSR		0x0418
+#define BCMA_CC_UART1_SCRATCH		0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
+#define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
+#define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
+#define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
+#define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
+#define  BCMA_CC_PMU_CTL_XTALFREQ	0x0000007C /* Crystal freq */
+#define  BCMA_CC_PMU_CTL_XTALFREQ_SHIFT	2
+#define  BCMA_CC_PMU_CTL_ILPDIVEN	0x00000002 /* ILP div enable */
+#define  BCMA_CC_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP			0x0604 /* PMU capabilities */
+#define  BCMA_CC_PMU_CAP_REVISION	0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT		0x0608 /* PMU status */
+#define  BCMA_CC_PMU_STAT_INTPEND	0x00000040 /* Interrupt pending */
+#define  BCMA_CC_PMU_STAT_SBCLKST	0x00000030 /* Backplane clock status? */
+#define  BCMA_CC_PMU_STAT_HAVEALP	0x00000008 /* ALP available */
+#define  BCMA_CC_PMU_STAT_HAVEHT	0x00000004 /* HT available */
+#define  BCMA_CC_PMU_STAT_RESINIT	0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT		0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND		0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER		0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG		0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT		0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM		0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR		0x0650
+#define BCMA_CC_CHIPCTL_DATA		0x0654
+#define BCMA_CC_REGCTL_ADDR		0x0658
+#define BCMA_CC_REGCTL_DATA		0x065C
+#define BCMA_CC_PLLCTL_ADDR		0x0660
+#define BCMA_CC_PLLCTL_DATA		0x0664
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
+struct bcma_drv_cc {
+	struct bcma_device *core;
+	u32 status;
+	u32 capabilities;
+	u32 capabilities_ext;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+	struct bcma_chipcommon_pmu pmu;
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+	bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+	bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+					  u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
new file mode 100644
index 000000000000..b7e191cf00ec
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,89 @@
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
+#define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
+#define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
+#define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
+#define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
+#define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
+#define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
+#define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
+
+struct bcma_drv_pci {
+	struct bcma_device *core;
+	u8 setup_done:1;
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
+
+extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
new file mode 100644
index 000000000000..f82d88a960ce
--- /dev/null
+++ b/include/linux/bcma/bcma_regs.h
@@ -0,0 +1,34 @@
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL			0x0408
+#define  BCMA_IOCTL_CLK			0x0001
+#define  BCMA_IOCTL_FGC			0x0002
+#define  BCMA_IOCTL_CORE_BITS		0x3FFC
+#define  BCMA_IOCTL_PME_EN		0x4000
+#define  BCMA_IOCTL_BIST_EN		0x8000
+#define BCMA_RESET_CTL			0x0800
+#define  BCMA_RESET_CTL_RESET		0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR			0x44
+#define  BCMA_PCI_PE			0x100
+#define BCMA_PCI_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL		0x88	/* SPROM control */
+#define  BCMA_PCI_SPROMCTL_WE		0x10	/* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL		0x8c	/* Address space 1 burst control */
+#define BCMA_PCI_IRQS			0x90	/* PCI interrupts */
+#define BCMA_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS		0x98	/* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2		0xAC
+#define BCMA_PCI_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  BCMA_PCI_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  BCMA_PCI_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  BCMA_PCI_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  BCMA_PCI_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 48c007dae476..ae28e93fd072 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -382,6 +382,23 @@ struct ssb_device_id {
 #define SSB_ANY_ID		0xFFFF
 #define SSB_ANY_REV		0xFF
 
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+	__u16	manuf;
+	__u16	id;
+	__u8	rev;
+	__u8	class;
+};
+#define BCMA_CORE(_manuf, _id, _rev, _class)  \
+	{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+#define BCMA_CORETABLE_END  \
+	{ 0, },
+
+#define BCMA_ANY_MANUF		0xFFFF
+#define BCMA_ANY_ID		0xFFFF
+#define BCMA_ANY_REV		0xFF
+#define BCMA_ANY_CLASS		0xFF
+
 struct virtio_device_id {
 	__u32 device;
 	__u32 vendor;
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 88f3f07205f8..e26e2fb462d4 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -702,6 +702,24 @@ static int do_ssb_entry(const char *filename,
 	return 1;
 }
 
+/* Looks like: bcma:mNidNrevNclN. */
+static int do_bcma_entry(const char *filename,
+			 struct bcma_device_id *id, char *alias)
+{
+	id->manuf = TO_NATIVE(id->manuf);
+	id->id = TO_NATIVE(id->id);
+	id->rev = TO_NATIVE(id->rev);
+	id->class = TO_NATIVE(id->class);
+
+	strcpy(alias, "bcma:");
+	ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf);
+	ADD(alias, "id", id->id != BCMA_ANY_ID, id->id);
+	ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev);
+	ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class);
+	add_wildcard(alias);
+	return 1;
+}
+
 /* Looks like: virtio:dNvN */
 static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
 			   char *alias)
@@ -968,6 +986,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
 		do_table(symval, sym->st_size,
 			 sizeof(struct ssb_device_id), "ssb",
 			 do_ssb_entry, mod);
+	else if (sym_is(symname, "__mod_bcma_device_table"))
+		do_table(symval, sym->st_size,
+			 sizeof(struct bcma_device_id), "bcma",
+			 do_bcma_entry, mod);
 	else if (sym_is(symname, "__mod_virtio_device_table"))
 		do_table(symval, sym->st_size,
 			 sizeof(struct virtio_device_id), "virtio",
-- 
cgit v1.2.3-58-ga151


From c29c3f70c9eb6f18090da5af9dbe9dcb4adece8c Mon Sep 17 00:00:00 2001
From: Allan Stephens <Allan.Stephens@windriver.com>
Date: Tue, 20 Apr 2010 17:58:24 -0400
Subject: tipc: Abort excessive send requests as early as possible

Adds checks to TIPC's socket send routines to promptly detect and
abort attempts to send more than 66,000 bytes in a single TIPC
message or more than 2**31-1 bytes in a single TIPC byte stream request.
In addition, this ensures that the number of iovecs in a send request
does not exceed the limits of a standard integer variable.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 include/linux/tipc.h |  2 +-
 net/tipc/socket.c    | 13 +++++++++++++
 2 files changed, 14 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/tipc.h b/include/linux/tipc.h
index a5b994a204d2..f2d90091cc20 100644
--- a/include/linux/tipc.h
+++ b/include/linux/tipc.h
@@ -101,7 +101,7 @@ static inline unsigned int tipc_node(__u32 addr)
  * Limiting values for messages
  */
 
-#define TIPC_MAX_USER_MSG_SIZE	66000
+#define TIPC_MAX_USER_MSG_SIZE	66000U
 
 /*
  * Message importance levels
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 29d94d53198d..e1c791798ba1 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -535,6 +535,9 @@ static int send_msg(struct kiocb *iocb, struct socket *sock,
 	if (unlikely((m->msg_namelen < sizeof(*dest)) ||
 		     (dest->family != AF_TIPC)))
 		return -EINVAL;
+	if ((total_len > TIPC_MAX_USER_MSG_SIZE) ||
+	    (m->msg_iovlen > (unsigned)INT_MAX))
+		return -EMSGSIZE;
 
 	if (iocb)
 		lock_sock(sk);
@@ -640,6 +643,10 @@ static int send_packet(struct kiocb *iocb, struct socket *sock,
 	if (unlikely(dest))
 		return send_msg(iocb, sock, m, total_len);
 
+	if ((total_len > TIPC_MAX_USER_MSG_SIZE) ||
+	    (m->msg_iovlen > (unsigned)INT_MAX))
+		return -EMSGSIZE;
+
 	if (iocb)
 		lock_sock(sk);
 
@@ -723,6 +730,12 @@ static int send_stream(struct kiocb *iocb, struct socket *sock,
 		goto exit;
 	}
 
+	if ((total_len > (unsigned)INT_MAX) ||
+	    (m->msg_iovlen > (unsigned)INT_MAX)) {
+		res = -EMSGSIZE;
+		goto exit;
+	}
+
 	/*
 	 * Send each iovec entry using one or more messages
 	 *
-- 
cgit v1.2.3-58-ga151


From b130e5cec958bae3867cf6ab09a9b24ba8fada01 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:07 -0700
Subject: nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPE

Introduce a new configuration option to support AMPE from userspace.

Prior to this series we only supported authentication in userspace: an
authentication daemon would authenticate peer candidates in userspace
and hand them over to the kernel.  From that point the mesh stack would
take over and establish a peer link (Mesh Peering Management).

These patches introduce support for Authenticated Mesh Peering Exchange
in userspace.  The userspace daemon implements the AMPE protocol and on
successfull completion create mesh peers and install encryption keys.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h    | 10 ++++++++++
 include/net/cfg80211.h     |  4 +++-
 net/mac80211/cfg.c         |  6 +++++-
 net/mac80211/ieee80211_i.h |  6 +++++-
 net/mac80211/mesh.c        |  2 +-
 net/mac80211/mesh_plink.c  |  5 +++--
 net/wireless/nl80211.c     |  4 +++-
 7 files changed, 30 insertions(+), 7 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index a75dea9c416e..c53b916036c5 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1769,6 +1769,15 @@ enum nl80211_meshconf_params {
  * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
  * daemon will be authenticating mesh candidates.
  *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
+ * Peering Management (MPM) and is implemented with the assistance of a
+ * userspace daemon.  When this flag is set, the kernel will send peer
+ * management frames to a userspace daemon that will implement AMPE
+ * functionality (security capabilities selection, key confirmation, and key
+ * management).  When the flag is unset (default), the kernel can autonomously
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
+ *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
@@ -1778,6 +1787,7 @@ enum nl80211_mesh_setup_params {
 	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
 	NL80211_MESH_SETUP_IE,
 	NL80211_MESH_SETUP_USERSPACE_AUTH,
+	NL80211_MESH_SETUP_USERSPACE_AMPE,
 
 	/* keep last */
 	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0920daf36807..10c17d68059f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -695,7 +695,8 @@ struct mesh_config {
  * @path_metric: which metric to use
  * @ie: vendor information elements (optional)
  * @ie_len: length of vendor information elements
- * @is_secure: or not
+ * @is_authenticated: this mesh requires authentication
+ * @is_secure: this mesh uses security
  *
  * These parameters are fixed when the mesh is created.
  */
@@ -706,6 +707,7 @@ struct mesh_setup {
 	u8  path_metric;
 	const u8 *ie;
 	u8 ie_len;
+	bool is_authenticated;
 	bool is_secure;
 };
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 1ebc13383ae7..18c2555e04e6 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1064,7 +1064,11 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
 	memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len);
 	ifmsh->mesh_pp_id = setup->path_sel_proto;
 	ifmsh->mesh_pm_id = setup->path_metric;
-	ifmsh->is_secure = setup->is_secure;
+	ifmsh->security = IEEE80211_MESH_SEC_NONE;
+	if (setup->is_authenticated)
+		ifmsh->security |= IEEE80211_MESH_SEC_AUTHED;
+	if (setup->is_secure)
+		ifmsh->security |= IEEE80211_MESH_SEC_SECURED;
 
 	return 0;
 }
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e89bc27f8dc3..7f4d0dc1d534 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -490,7 +490,11 @@ struct ieee80211_if_mesh {
 	bool accepting_plinks;
 	const u8 *ie;
 	u8 ie_len;
-	bool is_secure;
+	enum {
+		IEEE80211_MESH_SEC_NONE = 0x0,
+		IEEE80211_MESH_SEC_AUTHED = 0x1,
+		IEEE80211_MESH_SEC_SECURED = 0x2,
+	} security;
 };
 
 #ifdef CONFIG_MAC80211_MESH
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index c1299e249541..2a59eb345131 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -574,7 +574,7 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 			       &elems);
 
 	/* ignore beacons from secure mesh peers if our security is off */
-	if (elems.rsn_len && !sdata->u.mesh.is_secure)
+	if (elems.rsn_len && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE)
 		return;
 
 	if (elems.ds_params && elems.ds_params_len == 1)
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 84e5b056af02..87abf8deb369 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -251,7 +251,7 @@ void mesh_neighbour_update(u8 *hw_addr, u32 rates,
 		rcu_read_unlock();
 		/* Userspace handles peer allocation when security is enabled
 		 * */
-		if (sdata->u.mesh.is_secure)
+		if (sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED)
 			cfg80211_notify_new_peer_candidate(sdata->dev, hw_addr,
 					elems->ie_start, elems->total_len,
 					GFP_KERNEL);
@@ -460,7 +460,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		mpl_dbg("Mesh plink: missing necessary peer link ie\n");
 		return;
 	}
-	if (elems.rsn_len && !sdata->u.mesh.is_secure) {
+	if (elems.rsn_len &&
+			sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) {
 		mpl_dbg("Mesh plink: can't establish link with secure peer\n");
 		return;
 	}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0a199a1ca9b6..64efc2d7a7ad 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2871,6 +2871,7 @@ static const struct nla_policy
 	[NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG },
 	[NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY,
 		.len = IEEE80211_MAX_DATA_LEN },
+	[NL80211_MESH_SETUP_USERSPACE_AMPE] = { .type = NLA_FLAG },
 };
 
 static int nl80211_parse_mesh_config(struct genl_info *info,
@@ -2980,7 +2981,8 @@ static int nl80211_parse_mesh_setup(struct genl_info *info,
 		setup->ie = nla_data(ieattr);
 		setup->ie_len = nla_len(ieattr);
 	}
-	setup->is_secure = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AUTH]);
+	setup->is_authenticated = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AUTH]);
+	setup->is_secure = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AMPE]);
 
 	return 0;
 }
-- 
cgit v1.2.3-58-ga151


From d3aaec8ab76c2d604c2ba7332e1338674607597b Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:09 -0700
Subject: mac80211: Drop MESH_PLINK category and use new ANA-approved
 MESH_ACTION

Note: This breaks compatibility with previous mesh protocol instances.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h | 5 ++---
 net/mac80211/mesh.c       | 2 +-
 net/mac80211/mesh_plink.c | 2 +-
 net/mac80211/rx.c         | 7 +++++--
 4 files changed, 9 insertions(+), 7 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 79690b710665..ee1c96a866cc 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1261,9 +1261,8 @@ enum ieee80211_category {
 	WLAN_CATEGORY_MULTIHOP_ACTION = 14,
 	WLAN_CATEGORY_SELF_PROTECTED = 15,
 	WLAN_CATEGORY_WMM = 17,
-	/* TODO: remove MESH_PLINK and MESH_PATH_SEL after */
-	/*       mesh is updated to current 802.11s draft  */
-	WLAN_CATEGORY_MESH_PLINK = 30,
+	/* TODO: remove MESH_PATH_SEL after mesh is updated
+	 * to current 802.11s draft  */
 	WLAN_CATEGORY_MESH_PATH_SEL = 32,
 	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
 	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 2a59eb345131..75378e852f00 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -600,7 +600,7 @@ static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
 					  struct ieee80211_rx_status *rx_status)
 {
 	switch (mgmt->u.action.category) {
-	case WLAN_CATEGORY_MESH_PLINK:
+	case WLAN_CATEGORY_MESH_ACTION:
 		mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
 		break;
 	case WLAN_CATEGORY_MESH_PATH_SEL:
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 87abf8deb369..0120e9e36286 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -182,7 +182,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
 	/* BSSID is left zeroed, wildcard value */
-	mgmt->u.action.category = WLAN_CATEGORY_MESH_PLINK;
+	mgmt->u.action.category = WLAN_CATEGORY_MESH_ACTION;
 	mgmt->u.action.u.plink_action.action_code = action;
 
 	if (action == PLINK_CLOSE)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 81241e18f3a4..634f3d97a279 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -495,8 +495,11 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
 			return RX_DROP_MONITOR;
 
 		if (ieee80211_is_action(hdr->frame_control)) {
+			u8 category;
 			mgmt = (struct ieee80211_mgmt *)hdr;
-			if (mgmt->u.action.category != WLAN_CATEGORY_MESH_PLINK)
+			category = mgmt->u.action.category;
+			if (category != WLAN_CATEGORY_MESH_ACTION &&
+				category != WLAN_CATEGORY_SELF_PROTECTED)
 				return RX_DROP_MONITOR;
 			return RX_CONTINUE;
 		}
@@ -2205,7 +2208,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 			goto handled;
 		}
 		break;
-	case WLAN_CATEGORY_MESH_PLINK:
+	case WLAN_CATEGORY_MESH_ACTION:
 		if (!ieee80211_vif_is_mesh(&sdata->vif))
 			break;
 		goto queue;
-- 
cgit v1.2.3-58-ga151


From 0a35d36d6f019bde6c98812456798275b02e5aee Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Wed, 4 May 2011 10:24:56 -0700
Subject: cfg80211: Use capability info to detect mesh beacons.

Mesh beacons no longer use all-zeroes BSSID.  Beacon frames for MBSS,
infrastructure BSS, or IBSS are differentiated by the Capability
Information field in the Beacon frame.  A mesh STA sets the ESS and IBSS
subfields to 0 in transmitted Beacon or Probe Response management
frames.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h |  5 +++++
 net/wireless/scan.c       | 14 +++++++-------
 2 files changed, 12 insertions(+), 7 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ee1c96a866cc..d527fb7bd67a 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1002,6 +1002,11 @@ struct ieee80211_ht_info {
 
 #define WLAN_CAPABILITY_ESS		(1<<0)
 #define WLAN_CAPABILITY_IBSS		(1<<1)
+
+/* A mesh STA sets the ESS and IBSS capability bits to zero */
+#define WLAN_CAPABILITY_IS_MBSS(cap)	\
+	(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
+
 #define WLAN_CAPABILITY_CF_POLLABLE	(1<<2)
 #define WLAN_CAPABILITY_CF_POLL_REQUEST	(1<<3)
 #define WLAN_CAPABILITY_PRIVACY		(1<<4)
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index fbf6f33ae4d0..62e542a2b192 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -210,7 +210,7 @@ static bool is_mesh(struct cfg80211_bss *a,
 {
 	const u8 *ie;
 
-	if (!is_zero_ether_addr(a->bssid))
+	if (!WLAN_CAPABILITY_IS_MBSS(a->capability))
 		return false;
 
 	ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
@@ -248,11 +248,7 @@ static int cmp_bss(struct cfg80211_bss *a,
 	if (a->channel != b->channel)
 		return b->channel->center_freq - a->channel->center_freq;
 
-	r = memcmp(a->bssid, b->bssid, ETH_ALEN);
-	if (r)
-		return r;
-
-	if (is_zero_ether_addr(a->bssid)) {
+	if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) {
 		r = cmp_ies(WLAN_EID_MESH_ID,
 			    a->information_elements,
 			    a->len_information_elements,
@@ -267,6 +263,10 @@ static int cmp_bss(struct cfg80211_bss *a,
 			       b->len_information_elements);
 	}
 
+	r = memcmp(a->bssid, b->bssid, ETH_ALEN);
+	if (r)
+		return r;
+
 	return cmp_ies(WLAN_EID_SSID,
 		       a->information_elements,
 		       a->len_information_elements,
@@ -407,7 +407,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 
 	res->ts = jiffies;
 
-	if (is_zero_ether_addr(res->pub.bssid)) {
+	if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) {
 		/* must be mesh, verify */
 		meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
 					  res->pub.information_elements,
-- 
cgit v1.2.3-58-ga151


From 9c3990aaec0ad9f686ef6480f6861f2df89b2a7a Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Tue, 3 May 2011 16:57:11 -0700
Subject: nl80211: Let userspace drive the peer link management states.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h |  4 ++++
 include/net/cfg80211.h  | 29 +++++++++++++++++++++++++++++
 net/mac80211/cfg.c      | 30 +++++++++++++++++++++---------
 net/mac80211/sta_info.h | 23 -----------------------
 net/wireless/nl80211.c  |  6 ++++++
 5 files changed, 60 insertions(+), 32 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index c53b916036c5..de96783954a1 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -913,6 +913,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
  *	allows auth frames in a mesh to be passed to userspace for processing via
  *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link. Used when
+ *      userspace is driving the peer link management state machine.
+ *      @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
  *
  * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
  *	the supported WoWLAN triggers
@@ -1109,6 +1112,7 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
 
 	NL80211_ATTR_SUPPORT_MESH_AUTH,
+	NL80211_ATTR_STA_PLINK_STATE,
 
 	NL80211_ATTR_WOWLAN_TRIGGERS,
 	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 10c17d68059f..4b0d035be64f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -371,6 +371,33 @@ enum plink_actions {
 	PLINK_ACTION_BLOCK,
 };
 
+/**
+ * enum plink_states - state of a mesh peer link finite state machine
+ *
+ * @PLINK_LISTEN: initial state, considered the implicit state of non
+ * existant mesh peer links
+ * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh
+ * peer @PLINK_OPN_RCVD: mesh plink open frame has been received from
+ * this mesh peer
+ * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from
+ * this mesh peer
+ * @PLINK_ESTAB: mesh peer link is established
+ * @PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @PLINK_BLOCKED: all frames transmitted from this mesh plink are
+ * discarded
+ * @PLINK_INVALID: reserved
+ */
+enum plink_state {
+	PLINK_LISTEN,
+	PLINK_OPN_SNT,
+	PLINK_OPN_RCVD,
+	PLINK_CNF_RCVD,
+	PLINK_ESTAB,
+	PLINK_HOLDING,
+	PLINK_BLOCKED,
+	PLINK_INVALID,
+};
+
 /**
  * struct station_parameters - station parameters
  *
@@ -387,6 +414,7 @@ enum plink_actions {
  * @listen_interval: listen interval or -1 for no change
  * @aid: AID or zero for no change
  * @plink_action: plink action to take
+ * @plink_state: set the peer link state for a station
  * @ht_capa: HT capabilities of station
  */
 struct station_parameters {
@@ -397,6 +425,7 @@ struct station_parameters {
 	u16 aid;
 	u8 supported_rates_len;
 	u8 plink_action;
+	u8 plink_state;
 	struct ieee80211_ht_cap *ht_capa;
 };
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 18c2555e04e6..51f775772d9e 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -734,15 +734,27 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 						  params->ht_capa,
 						  &sta->sta.ht_cap);
 
-	if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
-		switch (params->plink_action) {
-		case PLINK_ACTION_OPEN:
-			mesh_plink_open(sta);
-			break;
-		case PLINK_ACTION_BLOCK:
-			mesh_plink_block(sta);
-			break;
-		}
+	if (ieee80211_vif_is_mesh(&sdata->vif)) {
+		if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED)
+			switch (params->plink_state) {
+			case PLINK_LISTEN:
+			case PLINK_ESTAB:
+			case PLINK_BLOCKED:
+				sta->plink_state = params->plink_state;
+				break;
+			default:
+				/*  nothing  */
+				break;
+			}
+		else
+			switch (params->plink_action) {
+			case PLINK_ACTION_OPEN:
+				mesh_plink_open(sta);
+				break;
+			case PLINK_ACTION_BLOCK:
+				mesh_plink_block(sta);
+				break;
+			}
 	}
 }
 
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index af1a7f8c8675..f00b4dcb49d7 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -173,29 +173,6 @@ struct sta_ampdu_mlme {
 };
 
 
-/**
- * enum plink_state - state of a mesh peer link finite state machine
- *
- * @PLINK_LISTEN: initial state, considered the implicit state of non existant
- * 	mesh peer links
- * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh peer
- * @PLINK_OPN_RCVD: mesh plink open frame has been received from this mesh peer
- * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from this mesh
- * 	peer
- * @PLINK_ESTAB: mesh peer link is established
- * @PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @PLINK_BLOCKED: all frames transmitted from this mesh plink are discarded
- */
-enum plink_state {
-	PLINK_LISTEN,
-	PLINK_OPN_SNT,
-	PLINK_OPN_RCVD,
-	PLINK_CNF_RCVD,
-	PLINK_ESTAB,
-	PLINK_HOLDING,
-	PLINK_BLOCKED
-};
-
 /**
  * struct sta_info - STA information
  *
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 64efc2d7a7ad..f698c1d116e4 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -174,6 +174,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG },
 	[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
 	[NL80211_ATTR_WOWLAN_TRIGGERS] = { .type = NLA_NESTED },
+	[NL80211_ATTR_STA_PLINK_STATE] = { .type = NLA_U8 },
 };
 
 /* policy for the key attributes */
@@ -2247,6 +2248,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	memset(&params, 0, sizeof(params));
 
 	params.listen_interval = -1;
+	params.plink_state = PLINK_INVALID;
 
 	if (info->attrs[NL80211_ATTR_STA_AID])
 		return -EINVAL;
@@ -2278,6 +2280,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 		params.plink_action =
 		    nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
 
+	if (info->attrs[NL80211_ATTR_STA_PLINK_STATE])
+		params.plink_state =
+		    nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]);
+
 	err = get_vlan(info, rdev, &params.vlan);
 	if (err)
 		goto out;
-- 
cgit v1.2.3-58-ga151


From 8f9cb77d6d213c153b0571f494df0c24456aaf47 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Tue, 3 May 2011 16:57:14 -0700
Subject: mac80211: Self-protected management frames are not robust

They may contain encrypted information elements (as AMPE frames do)
but they are not encrypted.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index d527fb7bd67a..b2eee5879883 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1520,6 +1520,7 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
 		category = ((u8 *) hdr) + 24;
 		return *category != WLAN_CATEGORY_PUBLIC &&
 			*category != WLAN_CATEGORY_HT &&
+			*category != WLAN_CATEGORY_SELF_PROTECTED &&
 			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
 	}
 
-- 
cgit v1.2.3-58-ga151


From 1073e4ee595265086a592a056d903bf4fcc8885a Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 11 May 2011 02:08:09 +0200
Subject: bcma: add missing GPIO defines, use PULL register only when available
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Similar patch was commited to ssb.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bcma/driver_chipcommon.c            | 6 ++++--
 include/linux/bcma/bcma_driver_chipcommon.h | 5 +++++
 2 files changed, 9 insertions(+), 2 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index caf596091d4d..606102256b44 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -29,8 +29,10 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
 	if (cc->core->id.rev >= 35)
 		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
 
-	bcma_cc_write32(cc, 0x58, 0);
-	bcma_cc_write32(cc, 0x5C, 0);
+	if (cc->core->id.rev >= 20) {
+		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
+	}
 
 	if (cc->capabilities & BCMA_CC_CAP_PMU)
 		bcma_pmu_init(cc);
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 4f8fd6a4c1e6..083c3b6cd5ce 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -113,6 +113,8 @@
 #define BCMA_CC_FLASHDATA		0x0048
 #define BCMA_CC_BCAST_ADDR		0x0050
 #define BCMA_CC_BCAST_DATA		0x0054
+#define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+#define BCMA_CC_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
 #define BCMA_CC_GPIOIN			0x0060
 #define BCMA_CC_GPIOOUT			0x0064
 #define BCMA_CC_GPIOOUTEN		0x0068
@@ -121,6 +123,9 @@
 #define BCMA_CC_GPIOIRQ			0x0074
 #define BCMA_CC_WATCHDOG		0x0080
 #define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  BCMA_CC_GPIOTIMER_OFFTIME	0x0000FFFF
+#define  BCMA_CC_GPIOTIMER_OFFTIME_SHIFT	0
+#define  BCMA_CC_GPIOTIMER_ONTIME	0xFFFF0000
 #define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
 #define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
 #define BCMA_CC_CLOCK_N			0x0090
-- 
cgit v1.2.3-58-ga151


From 8576f815d5c8beb8b10f96abe31831b90af3d352 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 11 May 2011 02:10:58 +0200
Subject: ssb: move ssb_commit_settings and export it
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commiting settings is possible on devices without PCI core (but with CC
core). Export it for usage in drivers supporting other cores.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/driver_pcicore.c | 26 --------------------------
 drivers/ssb/main.c           | 25 +++++++++++++++++++++++++
 include/linux/ssb/ssb.h      |  1 +
 3 files changed, 26 insertions(+), 26 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 8fde1220bc89..82feb348c8bb 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -21,8 +21,6 @@ static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
 static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
 				u8 address, u16 data);
 
-static void ssb_commit_settings(struct ssb_bus *bus);
-
 static inline
 u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
 {
@@ -659,30 +657,6 @@ static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
 	pcicore_write32(pc, mdio_control, 0);
 }
 
-static void ssb_broadcast_value(struct ssb_device *dev,
-				u32 address, u32 data)
-{
-	/* This is used for both, PCI and ChipCommon core, so be careful. */
-	BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
-	BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
-
-	ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
-	ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
-	ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
-	ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
-}
-
-static void ssb_commit_settings(struct ssb_bus *bus)
-{
-	struct ssb_device *dev;
-
-	dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
-	if (WARN_ON(!dev))
-		return;
-	/* This forces an update of the cached registers. */
-	ssb_broadcast_value(dev, 0xFD8, 0);
-}
-
 int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
 				   struct ssb_device *dev)
 {
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index ad3da93a428c..ee2937c41424 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1329,6 +1329,31 @@ error:
 }
 EXPORT_SYMBOL(ssb_bus_powerup);
 
+static void ssb_broadcast_value(struct ssb_device *dev,
+				u32 address, u32 data)
+{
+	/* This is used for both, PCI and ChipCommon core, so be careful. */
+	BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+	BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+
+	ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
+	ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
+	ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
+	ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
+}
+
+void ssb_commit_settings(struct ssb_bus *bus)
+{
+	struct ssb_device *dev;
+
+	dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+	if (WARN_ON(!dev))
+		return;
+	/* This forces an update of the cached registers. */
+	ssb_broadcast_value(dev, 0xFD8, 0);
+}
+EXPORT_SYMBOL(ssb_commit_settings);
+
 u32 ssb_admatch_base(u32 adm)
 {
 	u32 base = 0;
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 7e99b348834c..f017b8900f78 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -518,6 +518,7 @@ extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
  * Otherwise static always-on powercontrol will be used. */
 extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
 
+extern void ssb_commit_settings(struct ssb_bus *bus);
 
 /* Various helper functions */
 extern u32 ssb_admatch_base(u32 adm);
-- 
cgit v1.2.3-58-ga151


From 807f8a8c300435d5483e8d78df9dcdbc27333166 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 11 May 2011 17:09:35 +0300
Subject: cfg80211/nl80211: add support for scheduled scans

Implement new functionality for scheduled scan offload.  With this feature we
can scan automatically at certain intervals.

The idea is that the hardware can perform scan automatically and filter on
desired results without waking up the host unnecessarily.

Add NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN
commands to the nl80211 interface.  When results are available they are
reported by NL80211_CMD_SCHED_SCAN_RESULTS events.  The userspace is
informed when the scheduled scan has stopped with a
NL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by
the driver or by a call to NL80211_CMD_STOP_SCHED_SCAN.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h |  25 +++++
 include/net/cfg80211.h  |  57 +++++++++++
 net/wireless/core.c     |  12 ++-
 net/wireless/core.h     |   7 ++
 net/wireless/nl80211.c  | 250 ++++++++++++++++++++++++++++++++++++++++++++++++
 net/wireless/nl80211.h  |   4 +
 net/wireless/scan.c     |  70 ++++++++++++++
 7 files changed, 424 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index de96783954a1..f8b5595ba4af 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -203,6 +203,26 @@
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
  *	partial scan results may be available
  *
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan.  Like with normal
+ *	scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) are passed, they are used
+ *	in the probe requests.  For broadcast, a broadcast SSID must be
+ *	passed (ie. an empty string).  If no SSID is passed, no probe
+ *	requests are sent and a passive scan is performed.
+ *	%NL80211_ATTR_SCAN_FREQUENCIES, if passed, define which channels
+ *	should be scanned; if not passed, all channels allowed for the
+ *	current regulatory domain are used.  Extra IEs can also be passed
+ *	from the userspace by using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ *	results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ *	stopped.  The driver may issue this event at any time during a
+ *	scheduled scan.  One reason for stopping the scan is if the hardware
+ *	does not support starting an association or a normal scan while running
+ *	a scheduled scan.  This event is also sent when the
+ *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ *	is brought down while a scheduled scan was running.
+ *
  * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
  *      or noise level
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
@@ -545,6 +565,11 @@ enum nl80211_commands {
 	NL80211_CMD_GET_WOWLAN,
 	NL80211_CMD_SET_WOWLAN,
 
+	NL80211_CMD_START_SCHED_SCAN,
+	NL80211_CMD_STOP_SCHED_SCAN,
+	NL80211_CMD_SCHED_SCAN_RESULTS,
+	NL80211_CMD_SCHED_SCAN_STOPPED,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4b0d035be64f..e214c85b74d2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -823,6 +823,33 @@ struct cfg80211_scan_request {
 	struct ieee80211_channel *channels[0];
 };
 
+/**
+ * struct cfg80211_sched_scan_request - scheduled scan request description
+ *
+ * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
+ * @n_ssids: number of SSIDs
+ * @n_channels: total number of channels to scan
+ * @ie: optional information element(s) to add into Probe Request or %NULL
+ * @ie_len: length of ie in octets
+ * @wiphy: the wiphy this was for
+ * @dev: the interface
+ * @channels: channels to scan
+ */
+struct cfg80211_sched_scan_request {
+	struct cfg80211_ssid *ssids;
+	int n_ssids;
+	u32 n_channels;
+	const u8 *ie;
+	size_t ie_len;
+
+	/* internal */
+	struct wiphy *wiphy;
+	struct net_device *dev;
+
+	/* keep last */
+	struct ieee80211_channel *channels[0];
+};
+
 /**
  * enum cfg80211_signal_type - signal type
  *
@@ -1292,6 +1319,10 @@ struct cfg80211_wowlan {
  * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
  *	allows the driver to adjust the dynamic ps timeout value.
  * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
+ * @sched_scan_start: Tell the driver to start a scheduled scan.
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled
+ *	scan.  The driver_initiated flag specifies whether the driver
+ *	itself has informed that the scan has stopped.
  *
  * @mgmt_frame_register: Notify driver that a management frame type was
  *	registered. Note that this callback may not sleep, and cannot run
@@ -1478,6 +1509,12 @@ struct cfg80211_ops {
 	int	(*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx);
 	void	(*get_ringparam)(struct wiphy *wiphy,
 				 u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+
+	int	(*sched_scan_start)(struct wiphy *wiphy,
+				struct net_device *dev,
+				struct cfg80211_sched_scan_request *request);
+	int	(*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev,
+				   bool driver_initiated);
 };
 
 /*
@@ -1522,6 +1559,7 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
  * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
  *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
+ * @WIPHY_FLAG_SCHED_SCAN: The device supports scheduled scans.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1534,6 +1572,7 @@ enum wiphy_flags {
 	WIPHY_FLAG_CONTROL_PORT_PROTOCOL	= BIT(7),
 	WIPHY_FLAG_IBSS_RSN			= BIT(8),
 	WIPHY_FLAG_MESH_AUTH			= BIT(10),
+	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
 };
 
 struct mac_address {
@@ -2354,6 +2393,24 @@ int cfg80211_wext_siwpmksa(struct net_device *dev,
  */
 void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
 
+/**
+ * cfg80211_sched_scan_results - notify that new scan results are available
+ *
+ * @wiphy: the wiphy which got scheduled scan results
+ */
+void cfg80211_sched_scan_results(struct wiphy *wiphy);
+
+/**
+ * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
+ *
+ * @wiphy: the wiphy on which the scheduled scan stopped
+ *
+ * The driver can call this function to inform cfg80211 that the
+ * scheduled scan had to be stopped, for whatever reason.  The driver
+ * is then called back via the sched_scan_stop operation when done.
+ */
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
+
 /**
  * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame
  *
diff --git a/net/wireless/core.c b/net/wireless/core.c
index bea0d80710c8..f924a49b2425 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -370,7 +370,8 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 	spin_lock_init(&rdev->bss_lock);
 	INIT_LIST_HEAD(&rdev->bss_list);
 	INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
-
+	INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
+	INIT_WORK(&rdev->sched_scan_stopped_wk, __cfg80211_sched_scan_stopped);
 #ifdef CONFIG_CFG80211_WEXT
 	rdev->wiphy.wext = &cfg80211_wext_handler;
 #endif
@@ -672,6 +673,11 @@ static void wdev_cleanup_work(struct work_struct *work)
 		___cfg80211_scan_done(rdev, true);
 	}
 
+	if (WARN_ON(rdev->sched_scan_req &&
+		    rdev->sched_scan_req->dev == wdev->netdev)) {
+		__cfg80211_stop_sched_scan(rdev, false);
+	}
+
 	cfg80211_unlock_rdev(rdev);
 
 	mutex_lock(&rdev->devlist_mtx);
@@ -759,6 +765,10 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 			break;
 		case NL80211_IFTYPE_P2P_CLIENT:
 		case NL80211_IFTYPE_STATION:
+			cfg80211_lock_rdev(rdev);
+			__cfg80211_stop_sched_scan(rdev, false);
+			cfg80211_unlock_rdev(rdev);
+
 			wdev_lock(wdev);
 #ifdef CONFIG_CFG80211_WEXT
 			kfree(wdev->wext.ie);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 7a18c10a7fb6..e3f7b1d995cd 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -60,8 +60,11 @@ struct cfg80211_registered_device {
 	struct rb_root bss_tree;
 	u32 bss_generation;
 	struct cfg80211_scan_request *scan_req; /* protected by RTNL */
+	struct cfg80211_sched_scan_request *sched_scan_req;
 	unsigned long suspend_at;
 	struct work_struct scan_done_wk;
+	struct work_struct sched_scan_results_wk;
+	struct work_struct sched_scan_stopped_wk;
 
 #ifdef CONFIG_NL80211_TESTMODE
 	struct genl_info *testmode_info;
@@ -411,6 +414,10 @@ void cfg80211_sme_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
 void cfg80211_sme_disassoc(struct net_device *dev, int idx);
 void __cfg80211_scan_done(struct work_struct *wk);
 void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak);
+void __cfg80211_sched_scan_results(struct work_struct *wk);
+int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
+			       bool driver_initiated);
+void __cfg80211_sched_scan_stopped(struct work_struct *wk);
 void cfg80211_upload_connect_keys(struct wireless_dev *wdev);
 int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 			  struct net_device *dev, enum nl80211_iftype ntype,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 95dd5832e719..4fac370284c0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -761,6 +761,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	}
 	CMD(set_channel, SET_CHANNEL);
 	CMD(set_wds_peer, SET_WDS_PEER);
+	if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN)
+		CMD(sched_scan_start, START_SCHED_SCAN);
 
 #undef CMD
 
@@ -3357,6 +3359,179 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	return err;
 }
 
+static int nl80211_start_sched_scan(struct sk_buff *skb,
+				    struct genl_info *info)
+{
+	struct cfg80211_sched_scan_request *request;
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	struct cfg80211_ssid *ssid;
+	struct ieee80211_channel *channel;
+	struct nlattr *attr;
+	struct wiphy *wiphy;
+	int err, tmp, n_ssids = 0, n_channels, i;
+	enum ieee80211_band band;
+	size_t ie_len;
+
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
+	    !rdev->ops->sched_scan_start)
+		return -EOPNOTSUPP;
+
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (rdev->sched_scan_req)
+		return -EINPROGRESS;
+
+	wiphy = &rdev->wiphy;
+
+	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
+		n_channels = validate_scan_freqs(
+				info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
+		if (!n_channels)
+			return -EINVAL;
+	} else {
+		n_channels = 0;
+
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++)
+			if (wiphy->bands[band])
+				n_channels += wiphy->bands[band]->n_channels;
+	}
+
+	if (info->attrs[NL80211_ATTR_SCAN_SSIDS])
+		nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
+				    tmp)
+			n_ssids++;
+
+	if (n_ssids > wiphy->max_scan_ssids)
+		return -EINVAL;
+
+	if (info->attrs[NL80211_ATTR_IE])
+		ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+	else
+		ie_len = 0;
+
+	if (ie_len > wiphy->max_scan_ie_len)
+		return -EINVAL;
+
+	request = kzalloc(sizeof(*request)
+			+ sizeof(*ssid) * n_ssids
+			+ sizeof(channel) * n_channels
+			+ ie_len, GFP_KERNEL);
+	if (!request)
+		return -ENOMEM;
+
+	if (n_ssids)
+		request->ssids = (void *)&request->channels[n_channels];
+	request->n_ssids = n_ssids;
+	if (ie_len) {
+		if (request->ssids)
+			request->ie = (void *)(request->ssids + n_ssids);
+		else
+			request->ie = (void *)(request->channels + n_channels);
+	}
+
+	i = 0;
+	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
+		/* user specified, bail out if channel not found */
+		nla_for_each_nested(attr,
+				    info->attrs[NL80211_ATTR_SCAN_FREQUENCIES],
+				    tmp) {
+			struct ieee80211_channel *chan;
+
+			chan = ieee80211_get_channel(wiphy, nla_get_u32(attr));
+
+			if (!chan) {
+				err = -EINVAL;
+				goto out_free;
+			}
+
+			/* ignore disabled channels */
+			if (chan->flags & IEEE80211_CHAN_DISABLED)
+				continue;
+
+			request->channels[i] = chan;
+			i++;
+		}
+	} else {
+		/* all channels */
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+			int j;
+			if (!wiphy->bands[band])
+				continue;
+			for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
+				struct ieee80211_channel *chan;
+
+				chan = &wiphy->bands[band]->channels[j];
+
+				if (chan->flags & IEEE80211_CHAN_DISABLED)
+					continue;
+
+				request->channels[i] = chan;
+				i++;
+			}
+		}
+	}
+
+	if (!i) {
+		err = -EINVAL;
+		goto out_free;
+	}
+
+	request->n_channels = i;
+
+	i = 0;
+	if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
+		nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
+				    tmp) {
+			if (request->ssids[i].ssid_len >
+			    IEEE80211_MAX_SSID_LEN) {
+				err = -EINVAL;
+				goto out_free;
+			}
+			memcpy(request->ssids[i].ssid, nla_data(attr),
+			       nla_len(attr));
+			request->ssids[i].ssid_len = nla_len(attr);
+			i++;
+		}
+	}
+
+	if (info->attrs[NL80211_ATTR_IE]) {
+		request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+		memcpy((void *)request->ie,
+		       nla_data(info->attrs[NL80211_ATTR_IE]),
+		       request->ie_len);
+	}
+
+	request->dev = dev;
+	request->wiphy = &rdev->wiphy;
+
+	err = rdev->ops->sched_scan_start(&rdev->wiphy, dev, request);
+	if (!err) {
+		rdev->sched_scan_req = request;
+		nl80211_send_sched_scan(rdev, dev,
+					NL80211_CMD_START_SCHED_SCAN);
+		goto out;
+	}
+
+out_free:
+	kfree(request);
+out:
+	return err;
+}
+
+static int nl80211_stop_sched_scan(struct sk_buff *skb,
+				   struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
+	    !rdev->ops->sched_scan_stop)
+		return -EOPNOTSUPP;
+
+	return __cfg80211_stop_sched_scan(rdev, false);
+}
+
 static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 			    struct cfg80211_registered_device *rdev,
 			    struct wireless_dev *wdev,
@@ -5326,6 +5501,22 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.dumpit = nl80211_dump_scan,
 	},
+	{
+		.cmd = NL80211_CMD_START_SCHED_SCAN,
+		.doit = nl80211_start_sched_scan,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
+		.cmd = NL80211_CMD_STOP_SCHED_SCAN,
+		.doit = nl80211_stop_sched_scan,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 	{
 		.cmd = NL80211_CMD_AUTHENTICATE,
 		.doit = nl80211_authenticate,
@@ -5652,6 +5843,28 @@ static int nl80211_send_scan_msg(struct sk_buff *msg,
 	return -EMSGSIZE;
 }
 
+static int
+nl80211_send_sched_scan_msg(struct sk_buff *msg,
+			    struct cfg80211_registered_device *rdev,
+			    struct net_device *netdev,
+			    u32 pid, u32 seq, int flags, u32 cmd)
+{
+	void *hdr;
+
+	hdr = nl80211hdr_put(msg, pid, seq, flags, cmd);
+	if (!hdr)
+		return -1;
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+
+	return genlmsg_end(msg, hdr);
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
+}
+
 void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
 			     struct net_device *netdev)
 {
@@ -5709,6 +5922,43 @@ void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
 				nl80211_scan_mcgrp.id, GFP_KERNEL);
 }
 
+void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
+				     struct net_device *netdev)
+{
+	struct sk_buff *msg;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return;
+
+	if (nl80211_send_sched_scan_msg(msg, rdev, netdev, 0, 0, 0,
+					NL80211_CMD_SCHED_SCAN_RESULTS) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_scan_mcgrp.id, GFP_KERNEL);
+}
+
+void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
+			     struct net_device *netdev, u32 cmd)
+{
+	struct sk_buff *msg;
+
+	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		return;
+
+	if (nl80211_send_sched_scan_msg(msg, rdev, netdev, 0, 0, 0, cmd) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_scan_mcgrp.id, GFP_KERNEL);
+}
+
 /*
  * This can happen on global regulatory changes or device specific settings
  * based on custom world regulatory domains.
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index f2af6955a665..2f1bfb87a651 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -12,6 +12,10 @@ void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
 			    struct net_device *netdev);
 void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
 			       struct net_device *netdev);
+void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
+			     struct net_device *netdev, u32 cmd);
+void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
+				     struct net_device *netdev);
 void nl80211_send_reg_change_event(struct regulatory_request *request);
 void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
 			  struct net_device *netdev,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 62e542a2b192..65dfae3b9d41 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -93,6 +93,76 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 }
 EXPORT_SYMBOL(cfg80211_scan_done);
 
+void __cfg80211_sched_scan_results(struct work_struct *wk)
+{
+	struct cfg80211_registered_device *rdev;
+
+	rdev = container_of(wk, struct cfg80211_registered_device,
+			    sched_scan_results_wk);
+
+	cfg80211_lock_rdev(rdev);
+
+	/* we don't have sched_scan_req anymore if the scan is stopping */
+	if (rdev->sched_scan_req)
+		nl80211_send_sched_scan_results(rdev,
+						rdev->sched_scan_req->dev);
+
+	cfg80211_unlock_rdev(rdev);
+}
+
+void cfg80211_sched_scan_results(struct wiphy *wiphy)
+{
+	/* ignore if we're not scanning */
+	if (wiphy_to_dev(wiphy)->sched_scan_req)
+		queue_work(cfg80211_wq,
+			   &wiphy_to_dev(wiphy)->sched_scan_results_wk);
+}
+EXPORT_SYMBOL(cfg80211_sched_scan_results);
+
+void __cfg80211_sched_scan_stopped(struct work_struct *wk)
+{
+	struct cfg80211_registered_device *rdev;
+
+	rdev = container_of(wk, struct cfg80211_registered_device,
+			    sched_scan_stopped_wk);
+
+	cfg80211_lock_rdev(rdev);
+	__cfg80211_stop_sched_scan(rdev, true);
+	cfg80211_unlock_rdev(rdev);
+}
+
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy)
+{
+	queue_work(cfg80211_wq, &wiphy_to_dev(wiphy)->sched_scan_stopped_wk);
+}
+EXPORT_SYMBOL(cfg80211_sched_scan_stopped);
+
+int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
+			       bool driver_initiated)
+{
+	int err;
+	struct net_device *dev;
+
+	ASSERT_RDEV_LOCK(rdev);
+
+	if (!rdev->sched_scan_req)
+		return 0;
+
+	dev = rdev->sched_scan_req->dev;
+
+	err = rdev->ops->sched_scan_stop(&rdev->wiphy, dev,
+					 driver_initiated);
+	if (err)
+		return err;
+
+	nl80211_send_sched_scan(rdev, dev, NL80211_CMD_SCHED_SCAN_STOPPED);
+
+	kfree(rdev->sched_scan_req);
+	rdev->sched_scan_req = NULL;
+
+	return err;
+}
+
 static void bss_release(struct kref *ref)
 {
 	struct cfg80211_internal_bss *bss;
-- 
cgit v1.2.3-58-ga151


From bbe6ad6dcb1eb26bd12ec85320f402721c3383ae Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 11 May 2011 17:09:37 +0300
Subject: cfg80211/nl80211: add interval attribute for scheduled scans

Introduce NL80211_ATTR_SCHED_SCAN_INTERVAL as a required attribute for
NL80211_CMD_START_SCHED_SCAN.  This value informs the driver at which
intervals the scheduled scan cycles should be executed.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 25 ++++++++++++++++---------
 include/net/cfg80211.h  |  2 ++
 net/wireless/nl80211.c  | 10 ++++++++++
 3 files changed, 28 insertions(+), 9 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index f8b5595ba4af..281a2bb6a6ec 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -203,15 +203,17 @@
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
  *	partial scan results may be available
  *
- * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan.  Like with normal
- *	scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) are passed, they are used
- *	in the probe requests.  For broadcast, a broadcast SSID must be
- *	passed (ie. an empty string).  If no SSID is passed, no probe
- *	requests are sent and a passive scan is performed.
- *	%NL80211_ATTR_SCAN_FREQUENCIES, if passed, define which channels
- *	should be scanned; if not passed, all channels allowed for the
- *	current regulatory domain are used.  Extra IEs can also be passed
- *	from the userspace by using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ *	are passed, they are used in the probe requests.  For
+ *	broadcast, a broadcast SSID must be passed (ie. an empty
+ *	string).  If no SSID is passed, no probe requests are sent and
+ *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
+ *	if passed, define which channels should be scanned; if not
+ *	passed, all channels allowed for the current regulatory domain
+ *	are used.  Extra IEs can also be passed from the userspace by
+ *	using the %NL80211_ATTR_IE attribute.
  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan
  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
  *	results available.
@@ -948,6 +950,9 @@ enum nl80211_commands {
  *	indicate which WoW triggers should be enabled. This is also
  *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
  *	triggers.
+
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ *	cycles, in msecs.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1142,6 +1147,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_WOWLAN_TRIGGERS,
 	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
 
+	NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e214c85b74d2..1f1e221b6ce3 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -829,6 +829,7 @@ struct cfg80211_scan_request {
  * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
  * @n_ssids: number of SSIDs
  * @n_channels: total number of channels to scan
+ * @interval: interval between each scheduled scan cycle
  * @ie: optional information element(s) to add into Probe Request or %NULL
  * @ie_len: length of ie in octets
  * @wiphy: the wiphy this was for
@@ -839,6 +840,7 @@ struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
 	int n_ssids;
 	u32 n_channels;
+	u32 interval;
 	const u8 *ie;
 	size_t ie_len;
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 4fac370284c0..b5b050b62f2a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -175,6 +175,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
 	[NL80211_ATTR_WOWLAN_TRIGGERS] = { .type = NLA_NESTED },
 	[NL80211_ATTR_STA_PLINK_STATE] = { .type = NLA_U8 },
+	[NL80211_ATTR_SCHED_SCAN_INTERVAL] = { .type = NLA_U32 },
 };
 
 /* policy for the key attributes */
@@ -3370,6 +3371,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 	struct nlattr *attr;
 	struct wiphy *wiphy;
 	int err, tmp, n_ssids = 0, n_channels, i;
+	u32 interval;
 	enum ieee80211_band band;
 	size_t ie_len;
 
@@ -3383,6 +3385,13 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 	if (rdev->sched_scan_req)
 		return -EINPROGRESS;
 
+	if (!info->attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+		return -EINVAL;
+
+	interval = nla_get_u32(info->attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]);
+	if (interval == 0)
+		return -EINVAL;
+
 	wiphy = &rdev->wiphy;
 
 	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
@@ -3505,6 +3514,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 
 	request->dev = dev;
 	request->wiphy = &rdev->wiphy;
+	request->interval = interval;
 
 	err = rdev->ops->sched_scan_start(&rdev->wiphy, dev, request);
 	if (!err) {
-- 
cgit v1.2.3-58-ga151


From 7f267051bd7a280265b1b5ead58e9c6e4e1ac3a4 Mon Sep 17 00:00:00 2001
From: Yi Zou <yi.zou@intel.com>
Date: Mon, 9 May 2011 11:53:27 +0000
Subject: net: group FCoE related feature flags
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Michał Mirosław's patch (http://patchwork.ozlabs.org/patch/94421/) fixes the
issue (http://patchwork.ozlabs.org/patch/94188/) about not populating FCoE related
flags correctly on vlan devices. However, only NETIF_F_FCOE_CRC is part of the
NETIF_F_ALL_TX_OFFLOADS right now, where weed NETIF_F_FCOE_MTU and NETIF_F_FSO
as well.

Therefore, add NETIF_F_ALL_FCOE to indicate feature flags used by FCoE TX offloads.
These include NETIF_F_FCOE_CRC, NETIF_F_FCOE_MTU, and NETIF_F_FSO and add them to
be part of NETIF_F_ALL_TX_OFFLOADS. This would eventually make sure all FCoE needed
flags are populated properly to vlan devices.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index e7244ed1f9a8..00d650c74800 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1097,10 +1097,14 @@ struct net_device {
 
 #define NETIF_F_ALL_TSO 	(NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
 
+#define NETIF_F_ALL_FCOE	(NETIF_F_FCOE_CRC | NETIF_F_FCOE_MTU | \
+				 NETIF_F_FSO)
+
 #define NETIF_F_ALL_TX_OFFLOADS	(NETIF_F_ALL_CSUM | NETIF_F_SG | \
 				 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
 				 NETIF_F_HIGHDMA | \
-				 NETIF_F_SCTP_CSUM | NETIF_F_FCOE_CRC)
+				 NETIF_F_SCTP_CSUM | \
+				 NETIF_F_ALL_FCOE)
 
 	/*
 	 * If one device supports one of these features, then enable them
-- 
cgit v1.2.3-58-ga151


From afe12cc86b0ba545a01ad8716539ab07ab6e9e89 Mon Sep 17 00:00:00 2001
From: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Date: Sat, 7 May 2011 03:22:17 +0000
Subject: net: introduce netdev_change_features()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

It will be needed by bonding and other drivers changing vlan_features
after ndo_init callback.

As a bonus, this includes kernel-doc for netdev_update_features().

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h |  1 +
 net/core/dev.c            | 25 +++++++++++++++++++++++++
 2 files changed, 26 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 00d650c74800..1d9696a9ee4d 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2565,6 +2565,7 @@ u32 netdev_increment_features(u32 all, u32 one, u32 mask);
 u32 netdev_fix_features(struct net_device *dev, u32 features);
 int __netdev_update_features(struct net_device *dev);
 void netdev_update_features(struct net_device *dev);
+void netdev_change_features(struct net_device *dev);
 
 void netif_stacked_transfer_operstate(const struct net_device *rootdev,
 					struct net_device *dev);
diff --git a/net/core/dev.c b/net/core/dev.c
index 75898a32c038..ea23353e6251 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5289,6 +5289,14 @@ int __netdev_update_features(struct net_device *dev)
 	return 1;
 }
 
+/**
+ *	netdev_update_features - recalculate device features
+ *	@dev: the device to check
+ *
+ *	Recalculate dev->features set and send notifications if it
+ *	has changed. Should be called after driver or hardware dependent
+ *	conditions might have changed that influence the features.
+ */
 void netdev_update_features(struct net_device *dev)
 {
 	if (__netdev_update_features(dev))
@@ -5296,6 +5304,23 @@ void netdev_update_features(struct net_device *dev)
 }
 EXPORT_SYMBOL(netdev_update_features);
 
+/**
+ *	netdev_change_features - recalculate device features
+ *	@dev: the device to check
+ *
+ *	Recalculate dev->features set and send notifications even
+ *	if they have not changed. Should be called instead of
+ *	netdev_update_features() if also dev->vlan_features might
+ *	have changed to allow the changes to be propagated to stacked
+ *	VLAN devices.
+ */
+void netdev_change_features(struct net_device *dev)
+{
+	__netdev_update_features(dev);
+	netdev_features_change(dev);
+}
+EXPORT_SYMBOL(netdev_change_features);
+
 /**
  *	netif_stacked_transfer_operstate -	transfer operstate
  *	@rootdev: the root or lower level device to transfer state from
-- 
cgit v1.2.3-58-ga151


From bdc220da3209d50b8c295490dec94845c88670a2 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 9 May 2011 17:42:46 +0000
Subject: netdevice.h: Align struct net_device members

Save a bit of space.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 1d9696a9ee4d..a134d809125b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1020,9 +1020,6 @@ struct net_device {
 	 *	part of the usual set specified in Space.c.
 	 */
 
-	unsigned char		if_port;	/* Selectable AUI, TP,..*/
-	unsigned char		dma;		/* DMA channel		*/
-
 	unsigned long		state;
 
 	struct list_head	dev_list;
@@ -1146,13 +1143,16 @@ struct net_device {
 	const struct header_ops *header_ops;
 
 	unsigned int		flags;	/* interface flags (a la BSD)	*/
+	unsigned int		priv_flags; /* Like 'flags' but invisible to userspace. */
 	unsigned short		gflags;
-        unsigned int            priv_flags; /* Like 'flags' but invisible to userspace. */
 	unsigned short		padded;	/* How much padding added by alloc_netdev() */
 
 	unsigned char		operstate; /* RFC2863 operstate */
 	unsigned char		link_mode; /* mapping policy to operstate */
 
+	unsigned char		if_port;	/* Selectable AUI, TP,..*/
+	unsigned char		dma;		/* DMA channel		*/
+
 	unsigned int		mtu;	/* interface MTU value		*/
 	unsigned short		type;	/* interface hardware type	*/
 	unsigned short		hard_header_len;	/* hardware hdr length	*/
-- 
cgit v1.2.3-58-ga151


From 29dd54b72ba8c5ad0dd6dd33584449b5953f700b Mon Sep 17 00:00:00 2001
From: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Date: Thu, 12 May 2011 12:48:32 +0000
Subject: ethtool: Added support for FW dump

Added code to take FW dump via ethtool. Dump level can be controlled via setting the
dump flag. A get function is provided to query the current setting of the dump flag.
Dump data is obtained from the driver via a separate get function.

Changes from v3:
Fixed buffer length issue in ethtool_get_dump_data function.
Updated kernel doc for ethtool_dump struct and get_dump_flag function.

Changes from v2:
Provided separate commands for get flag and data.
Check for minimum of the two buffer length obtained via ethtool and driver and
use that for dump buffer
Pass up the driver return error codes up to the caller.
Added kernel doc comments.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/ethtool.h | 31 +++++++++++++++++
 net/core/ethtool.c      | 90 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 121 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index bd0b50b85f06..c6a850ab2ec5 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -601,6 +601,26 @@ struct ethtool_flash {
 	char	data[ETHTOOL_FLASH_MAX_FILENAME];
 };
 
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * 	%ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ * 	  get and filled in by ethtool for set operation
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * 	 for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+struct ethtool_dump {
+	__u32	cmd;
+	__u32	version;
+	__u32	flag;
+	__u32	len;
+	__u8	data[0];
+};
+
 /* for returning and changing feature sets */
 
 /**
@@ -853,6 +873,10 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
  * @get_channels: Get number of channels.
  * @set_channels: Set number of channels.  Returns a negative error code or
  *	zero.
+ * @get_dump_flag: Get dump flag indicating current dump length, version,
+ * 		   and flag of the device.
+ * @get_dump_data: Get dump data.
+ * @set_dump: Set dump specific flags to the device.
  *
  * All operations are optional (i.e. the function pointer may be set
  * to %NULL) and callers must take this into account.  Callers must
@@ -927,6 +951,10 @@ struct ethtool_ops {
 				  const struct ethtool_rxfh_indir *);
 	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
 	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
+	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
+	int	(*get_dump_data)(struct net_device *,
+				 struct ethtool_dump *, void *);
+	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
 
 };
 #endif /* __KERNEL__ */
@@ -998,6 +1026,9 @@ struct ethtool_ops {
 #define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
 #define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
 #define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index b8c2b10f397a..b8c2bcfee6af 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1823,6 +1823,87 @@ static noinline_for_stack int ethtool_flash_device(struct net_device *dev,
 	return dev->ethtool_ops->flash_device(dev, &efl);
 }
 
+static int ethtool_set_dump(struct net_device *dev,
+			void __user *useraddr)
+{
+	struct ethtool_dump dump;
+
+	if (!dev->ethtool_ops->set_dump)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&dump, useraddr, sizeof(dump)))
+		return -EFAULT;
+
+	return dev->ethtool_ops->set_dump(dev, &dump);
+}
+
+static int ethtool_get_dump_flag(struct net_device *dev,
+				void __user *useraddr)
+{
+	int ret;
+	struct ethtool_dump dump;
+	const struct ethtool_ops *ops = dev->ethtool_ops;
+
+	if (!dev->ethtool_ops->get_dump_flag)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&dump, useraddr, sizeof(dump)))
+		return -EFAULT;
+
+	ret = ops->get_dump_flag(dev, &dump);
+	if (ret)
+		return ret;
+
+	if (copy_to_user(useraddr, &dump, sizeof(dump)))
+		return -EFAULT;
+	return 0;
+}
+
+static int ethtool_get_dump_data(struct net_device *dev,
+				void __user *useraddr)
+{
+	int ret;
+	__u32 len;
+	struct ethtool_dump dump, tmp;
+	const struct ethtool_ops *ops = dev->ethtool_ops;
+	void *data = NULL;
+
+	if (!dev->ethtool_ops->get_dump_data ||
+		!dev->ethtool_ops->get_dump_flag)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&dump, useraddr, sizeof(dump)))
+		return -EFAULT;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.cmd = ETHTOOL_GET_DUMP_FLAG;
+	ret = ops->get_dump_flag(dev, &tmp);
+	if (ret)
+		return ret;
+
+	len = (tmp.len > dump.len) ? dump.len : tmp.len;
+	if (!len)
+		return -EFAULT;
+
+	data = vzalloc(tmp.len);
+	if (!data)
+		return -ENOMEM;
+	ret = ops->get_dump_data(dev, &dump, data);
+	if (ret)
+		goto out;
+
+	if (copy_to_user(useraddr, &dump, sizeof(dump))) {
+		ret = -EFAULT;
+		goto out;
+	}
+	useraddr += offsetof(struct ethtool_dump, data);
+	if (copy_to_user(useraddr, data, len))
+		ret = -EFAULT;
+out:
+	vfree(data);
+	return ret;
+}
+
 /* The main entry point in this file.  Called from net/core/dev.c */
 
 int dev_ethtool(struct net *net, struct ifreq *ifr)
@@ -2039,6 +2120,15 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
 	case ETHTOOL_SCHANNELS:
 		rc = ethtool_set_channels(dev, useraddr);
 		break;
+	case ETHTOOL_SET_DUMP:
+		rc = ethtool_set_dump(dev, useraddr);
+		break;
+	case ETHTOOL_GET_DUMP_FLAG:
+		rc = ethtool_get_dump_flag(dev, useraddr);
+		break;
+	case ETHTOOL_GET_DUMP_DATA:
+		rc = ethtool_get_dump_data(dev, useraddr);
+		break;
 	default:
 		rc = -EOPNOTSUPP;
 	}
-- 
cgit v1.2.3-58-ga151


From 7527a782e187d1214a5b3dc2897ce441033bb4ef Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 13 May 2011 10:58:57 +0200
Subject: cfg80211: advertise possible interface combinations

Add the ability to advertise interface combinations in nl80211.
This allows the driver to indicate what the combinations are
that it supports. "Combinations" of just a single interface are
implicit, as previously. Note that cfg80211 will enforce that
the restrictions are met, but not for all drivers yet (once all
drivers are updated, we can remove the flag and enforce for all).

When no combinations are actually supported, an empty list will
be exported so that userspace can know if the kernel exported
this info or not (although it isn't clear to me what tools using
the info should do if the kernel didn't export it).

Since some interface types are purely virtual/software and don't
fit the restrictions, those are exposed in a new list of pure SW
types, not subject to restrictions. This mainly exists to handle
AP-VLAN and monitor interfaces in mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 122 +++++++++++++++++++++++++++++++++++++++++++++++-
 include/net/cfg80211.h  |  88 ++++++++++++++++++++++++++++++++++
 net/mac80211/main.c     |  16 +++++--
 net/wireless/core.c     |  69 +++++++++++++++++++++++++++
 net/wireless/core.h     |  11 +++++
 net/wireless/nl80211.c  | 105 +++++++++++++++++++++++++++++++++++------
 net/wireless/util.c     |  80 +++++++++++++++++++++++++++++++
 7 files changed, 472 insertions(+), 19 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 281a2bb6a6ec..0ea497cb607c 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -76,6 +76,39 @@
  * below.
  */
 
+/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
 /**
  * enum nl80211_commands - supported nl80211 commands
  *
@@ -954,6 +987,14 @@ enum nl80211_commands {
  * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
  *	cycles, in msecs.
  *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ *	interface combinations. In each nested item, it contains attributes
+ *	defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ *	are managed in software: interfaces of these types aren't subject to
+ *	any restrictions in their number or combinations.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1149,6 +1190,9 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_SCHED_SCAN_INTERVAL,
 
+	NL80211_ATTR_INTERFACE_COMBINATIONS,
+	NL80211_ATTR_SOFTWARE_IFTYPES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1201,7 +1245,9 @@ enum nl80211_attrs {
  * @NL80211_IFTYPE_ADHOC: independent BSS member
  * @NL80211_IFTYPE_STATION: managed BSS member
  * @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ *	are a bit special in that they must always be tied to a pre-existing
+ *	AP type interface.
  * @NL80211_IFTYPE_WDS: wireless distribution interface
  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
  * @NL80211_IFTYPE_MESH_POINT: mesh point
@@ -2206,4 +2252,78 @@ enum nl80211_wowlan_triggers {
 	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
 };
 
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ *	can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ *	flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+	NL80211_IFACE_LIMIT_UNSPEC,
+	NL80211_IFACE_LIMIT_MAX,
+	NL80211_IFACE_LIMIT_TYPES,
+
+	/* keep last */
+	NUM_NL80211_IFACE_LIMIT,
+	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ *	for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ *	interfaces that can be created in this group. This number doesn't
+ *	apply to interfaces purely managed in software, which are listed
+ *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ *	beacon intervals within this group must be all the same even for
+ *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ *	the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ *	different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ *	=> allows an AP and a STA that must match BIs
+ *
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ *	=> allows 8 of AP/GO
+ *
+ *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ *	=> allows two STAs on different channels
+ *
+ *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ *	=> allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+	NL80211_IFACE_COMB_UNSPEC,
+	NL80211_IFACE_COMB_LIMITS,
+	NL80211_IFACE_COMB_MAXNUM,
+	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+	NL80211_IFACE_COMB_NUM_CHANNELS,
+
+	/* keep last */
+	NUM_NL80211_IFACE_COMB,
+	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e1f1b41f7b13..04afcfb9eaf4 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1547,6 +1547,10 @@ struct cfg80211_ops {
  *	hints read the documenation for regulatory_hint_found_beacon()
  * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
  *	wiphy at all
+ * @WIPHY_FLAG_ENFORCE_COMBINATIONS: Set this flag to enforce interface
+ *	combinations for this device. This flag is used for backward
+ *	compatibility only until all drivers advertise combinations and
+ *	they will always be enforced.
  * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
  *	by default -- this flag will be set depending on the kernel's default
  *	on wiphy_new(), but can be changed by the driver if it has a good
@@ -1574,6 +1578,81 @@ enum wiphy_flags {
 	WIPHY_FLAG_IBSS_RSN			= BIT(8),
 	WIPHY_FLAG_MESH_AUTH			= BIT(10),
 	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
+	WIPHY_FLAG_ENFORCE_COMBINATIONS		= BIT(12),
+};
+
+/**
+ * struct ieee80211_iface_limit - limit on certain interface types
+ * @max: maximum number of interfaces of these types
+ * @types: interface types (bits)
+ */
+struct ieee80211_iface_limit {
+	u16 max;
+	u16 types;
+};
+
+/**
+ * struct ieee80211_iface_combination - possible interface combination
+ * @limits: limits for the given interface types
+ * @n_limits: number of limitations
+ * @num_different_channels: can use up to this many different channels
+ * @max_interfaces: maximum number of interfaces in total allowed in this
+ *	group
+ * @beacon_int_infra_match: In this combination, the beacon intervals
+ *	between infrastructure and AP types must match. This is required
+ *	only in special cases.
+ *
+ * These examples can be expressed as follows:
+ *
+ * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
+ *
+ *  struct ieee80211_iface_limit limits1[] = {
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_AP}, },
+ *  };
+ *  struct ieee80211_iface_combination combination1 = {
+ *	.limits = limits1,
+ *	.n_limits = ARRAY_SIZE(limits1),
+ *	.max_interfaces = 2,
+ *	.beacon_int_infra_match = true,
+ *  };
+ *
+ *
+ * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
+ *
+ *  struct ieee80211_iface_limit limits2[] = {
+ *	{ .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
+ *			     BIT(NL80211_IFTYPE_P2P_GO), },
+ *  };
+ *  struct ieee80211_iface_combination combination2 = {
+ *	.limits = limits2,
+ *	.n_limits = ARRAY_SIZE(limits2),
+ *	.max_interfaces = 8,
+ *	.num_different_channels = 1,
+ *  };
+ *
+ *
+ * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ * This allows for an infrastructure connection and three P2P connections.
+ *
+ *  struct ieee80211_iface_limit limits3[] = {
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ *	{ .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) |
+ *			     BIT(NL80211_IFTYPE_P2P_CLIENT), },
+ *  };
+ *  struct ieee80211_iface_combination combination3 = {
+ *	.limits = limits3,
+ *	.n_limits = ARRAY_SIZE(limits3),
+ *	.max_interfaces = 4,
+ *	.num_different_channels = 2,
+ *  };
+ */
+struct ieee80211_iface_combination {
+	const struct ieee80211_iface_limit *limits;
+	u32 num_different_channels;
+	u16 max_interfaces;
+	u8 n_limits;
+	bool beacon_int_infra_match;
 };
 
 struct mac_address {
@@ -1653,6 +1732,11 @@ struct wiphy_wowlan_support {
  * @priv: driver private data (sized according to wiphy_new() parameter)
  * @interface_modes: bitmask of interfaces types valid for this wiphy,
  *	must be set by driver
+ * @iface_combinations: Valid interface combinations array, should not
+ *	list single interface types.
+ * @n_iface_combinations: number of entries in @iface_combinations array.
+ * @software_iftypes: bitmask of software interface types, these are not
+ *	subject to any restrictions since they are purely managed in SW.
  * @flags: wiphy flags, see &enum wiphy_flags
  * @bss_priv_size: each BSS struct has private data allocated with it,
  *	this variable determines its size
@@ -1697,6 +1781,10 @@ struct wiphy {
 
 	const struct ieee80211_txrx_stypes *mgmt_stypes;
 
+	const struct ieee80211_iface_combination *iface_combinations;
+	int n_iface_combinations;
+	u16 software_iftypes;
+
 	u16 n_addresses;
 
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 7f89011fa22d..79a2281678bf 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -685,7 +685,7 @@ EXPORT_SYMBOL(ieee80211_alloc_hw);
 int ieee80211_register_hw(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
-	int result;
+	int result, i;
 	enum ieee80211_band band;
 	int channels, max_bitrates;
 	bool supp_ht;
@@ -743,11 +743,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		return -ENOMEM;
 
 	/* if low-level driver supports AP, we also support VLAN */
-	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP))
-		local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
+	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
+		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
+		hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
+	}
 
 	/* mac80211 always supports monitor */
-	local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+	hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+	hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
+
+	/* mac80211 doesn't support more than 1 channel */
+	for (i = 0; i < hw->wiphy->n_iface_combinations; i++)
+		if (hw->wiphy->iface_combinations[i].num_different_channels > 1)
+			return -EINVAL;
 
 #ifndef CONFIG_MAC80211_MESH
 	/* mesh depends on Kconfig, but drivers should set it if they want */
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 18b002f16860..c22ef3492ee6 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -416,6 +416,67 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 }
 EXPORT_SYMBOL(wiphy_new);
 
+static int wiphy_verify_combinations(struct wiphy *wiphy)
+{
+	const struct ieee80211_iface_combination *c;
+	int i, j;
+
+	/* If we have combinations enforce them */
+	if (wiphy->n_iface_combinations)
+		wiphy->flags |= WIPHY_FLAG_ENFORCE_COMBINATIONS;
+
+	for (i = 0; i < wiphy->n_iface_combinations; i++) {
+		u32 cnt = 0;
+		u16 all_iftypes = 0;
+
+		c = &wiphy->iface_combinations[i];
+
+		/* Combinations with just one interface aren't real */
+		if (WARN_ON(c->max_interfaces < 2))
+			return -EINVAL;
+
+		/* Need at least one channel */
+		if (WARN_ON(!c->num_different_channels))
+			return -EINVAL;
+
+		if (WARN_ON(!c->n_limits))
+			return -EINVAL;
+
+		for (j = 0; j < c->n_limits; j++) {
+			u16 types = c->limits[j].types;
+
+			/*
+			 * interface types shouldn't overlap, this is
+			 * used in cfg80211_can_change_interface()
+			 */
+			if (WARN_ON(types & all_iftypes))
+				return -EINVAL;
+			all_iftypes |= types;
+
+			if (WARN_ON(!c->limits[j].max))
+				return -EINVAL;
+
+			/* Shouldn't list software iftypes in combinations! */
+			if (WARN_ON(wiphy->software_iftypes & types))
+				return -EINVAL;
+
+			cnt += c->limits[j].max;
+			/*
+			 * Don't advertise an unsupported type
+			 * in a combination.
+			 */
+			if (WARN_ON((wiphy->interface_modes & types) != types))
+				return -EINVAL;
+		}
+
+		/* You can't even choose that many! */
+		if (WARN_ON(cnt < c->max_interfaces))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 int wiphy_register(struct wiphy *wiphy)
 {
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
@@ -444,6 +505,10 @@ int wiphy_register(struct wiphy *wiphy)
 	if (WARN_ON(ifmodes != wiphy->interface_modes))
 		wiphy->interface_modes = ifmodes;
 
+	res = wiphy_verify_combinations(wiphy);
+	if (res)
+		return res;
+
 	/* sanity check supported bands/channels */
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		sband = wiphy->bands[band];
@@ -698,6 +763,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 	struct net_device *dev = ndev;
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev;
+	int ret;
 
 	if (!wdev)
 		return NOTIFY_DONE;
@@ -893,6 +959,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 			return notifier_from_errno(-EOPNOTSUPP);
 		if (rfkill_blocked(rdev->rfkill))
 			return notifier_from_errno(-ERFKILL);
+		ret = cfg80211_can_add_interface(rdev, wdev->iftype);
+		if (ret)
+			return notifier_from_errno(ret);
 		break;
 	}
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index d4b8f4c0bbbb..bf0fb40e3c8b 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -422,6 +422,17 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 			  u32 *flags, struct vif_params *params);
 void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev);
 
+int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
+				  struct wireless_dev *wdev,
+				  enum nl80211_iftype iftype);
+
+static inline int
+cfg80211_can_add_interface(struct cfg80211_registered_device *rdev,
+			   enum nl80211_iftype iftype)
+{
+	return cfg80211_can_change_interface(rdev, NULL, iftype);
+}
+
 struct ieee80211_channel *
 rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 		  int freq, enum nl80211_channel_type channel_type);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9ef8e287d61b..beac296b1fde 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -564,6 +564,88 @@ static int nl80211_key_allowed(struct wireless_dev *wdev)
 	return 0;
 }
 
+static int nl80211_put_iftypes(struct sk_buff *msg, u32 attr, u16 ifmodes)
+{
+	struct nlattr *nl_modes = nla_nest_start(msg, attr);
+	int i;
+
+	if (!nl_modes)
+		goto nla_put_failure;
+
+	i = 0;
+	while (ifmodes) {
+		if (ifmodes & 1)
+			NLA_PUT_FLAG(msg, i);
+		ifmodes >>= 1;
+		i++;
+	}
+
+	nla_nest_end(msg, nl_modes);
+	return 0;
+
+nla_put_failure:
+	return -ENOBUFS;
+}
+
+static int nl80211_put_iface_combinations(struct wiphy *wiphy,
+					  struct sk_buff *msg)
+{
+	struct nlattr *nl_combis;
+	int i, j;
+
+	nl_combis = nla_nest_start(msg,
+				NL80211_ATTR_INTERFACE_COMBINATIONS);
+	if (!nl_combis)
+		goto nla_put_failure;
+
+	for (i = 0; i < wiphy->n_iface_combinations; i++) {
+		const struct ieee80211_iface_combination *c;
+		struct nlattr *nl_combi, *nl_limits;
+
+		c = &wiphy->iface_combinations[i];
+
+		nl_combi = nla_nest_start(msg, i + 1);
+		if (!nl_combi)
+			goto nla_put_failure;
+
+		nl_limits = nla_nest_start(msg, NL80211_IFACE_COMB_LIMITS);
+		if (!nl_limits)
+			goto nla_put_failure;
+
+		for (j = 0; j < c->n_limits; j++) {
+			struct nlattr *nl_limit;
+
+			nl_limit = nla_nest_start(msg, j + 1);
+			if (!nl_limit)
+				goto nla_put_failure;
+			NLA_PUT_U32(msg, NL80211_IFACE_LIMIT_MAX,
+				    c->limits[j].max);
+			if (nl80211_put_iftypes(msg, NL80211_IFACE_LIMIT_TYPES,
+						c->limits[j].types))
+				goto nla_put_failure;
+			nla_nest_end(msg, nl_limit);
+		}
+
+		nla_nest_end(msg, nl_limits);
+
+		if (c->beacon_int_infra_match)
+			NLA_PUT_FLAG(msg,
+				NL80211_IFACE_COMB_STA_AP_BI_MATCH);
+		NLA_PUT_U32(msg, NL80211_IFACE_COMB_NUM_CHANNELS,
+			    c->num_different_channels);
+		NLA_PUT_U32(msg, NL80211_IFACE_COMB_MAXNUM,
+			    c->max_interfaces);
+
+		nla_nest_end(msg, nl_combi);
+	}
+
+	nla_nest_end(msg, nl_combis);
+
+	return 0;
+nla_put_failure:
+	return -ENOBUFS;
+}
+
 static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 			      struct cfg80211_registered_device *dev)
 {
@@ -571,13 +653,11 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	struct nlattr *nl_bands, *nl_band;
 	struct nlattr *nl_freqs, *nl_freq;
 	struct nlattr *nl_rates, *nl_rate;
-	struct nlattr *nl_modes;
 	struct nlattr *nl_cmds;
 	enum ieee80211_band band;
 	struct ieee80211_channel *chan;
 	struct ieee80211_rate *rate;
 	int i;
-	u16 ifmodes = dev->wiphy.interface_modes;
 	const struct ieee80211_txrx_stypes *mgmt_stypes =
 				dev->wiphy.mgmt_stypes;
 
@@ -637,20 +717,10 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		}
 	}
 
-	nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
-	if (!nl_modes)
+	if (nl80211_put_iftypes(msg, NL80211_ATTR_SUPPORTED_IFTYPES,
+				dev->wiphy.interface_modes))
 		goto nla_put_failure;
 
-	i = 0;
-	while (ifmodes) {
-		if (ifmodes & 1)
-			NLA_PUT_FLAG(msg, i);
-		ifmodes >>= 1;
-		i++;
-	}
-
-	nla_nest_end(msg, nl_modes);
-
 	nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
 	if (!nl_bands)
 		goto nla_put_failure;
@@ -865,6 +935,13 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		nla_nest_end(msg, nl_wowlan);
 	}
 
+	if (nl80211_put_iftypes(msg, NL80211_ATTR_SOFTWARE_IFTYPES,
+				dev->wiphy.software_iftypes))
+		goto nla_put_failure;
+
+	if (nl80211_put_iface_combinations(&dev->wiphy, msg))
+		goto nla_put_failure;
+
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 414c9f604df6..95e4e254da0a 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -803,6 +803,11 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 		return -EBUSY;
 
 	if (ntype != otype) {
+		err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
+						    ntype);
+		if (err)
+			return err;
+
 		dev->ieee80211_ptr->use_4addr = false;
 		dev->ieee80211_ptr->mesh_id_up_len = 0;
 
@@ -921,3 +926,78 @@ int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
 
 	return res;
 }
+
+int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
+				  struct wireless_dev *wdev,
+				  enum nl80211_iftype iftype)
+{
+	struct wireless_dev *wdev_iter;
+	int num[NUM_NL80211_IFTYPES];
+	int total = 1;
+	int i, j;
+
+	ASSERT_RTNL();
+
+	/* Always allow software iftypes */
+	if (rdev->wiphy.software_iftypes & BIT(iftype))
+		return 0;
+
+	/*
+	 * Drivers will gradually all set this flag, until all
+	 * have it we only enforce for those that set it.
+	 */
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_ENFORCE_COMBINATIONS))
+		return 0;
+
+	memset(num, 0, sizeof(num));
+
+	num[iftype] = 1;
+
+	mutex_lock(&rdev->devlist_mtx);
+	list_for_each_entry(wdev_iter, &rdev->netdev_list, list) {
+		if (wdev_iter == wdev)
+			continue;
+		if (!netif_running(wdev_iter->netdev))
+			continue;
+
+		if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
+			continue;
+
+		num[wdev_iter->iftype]++;
+		total++;
+	}
+	mutex_unlock(&rdev->devlist_mtx);
+
+	for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
+		const struct ieee80211_iface_combination *c;
+		struct ieee80211_iface_limit *limits;
+
+		c = &rdev->wiphy.iface_combinations[i];
+
+		limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits,
+				 GFP_KERNEL);
+		if (!limits)
+			return -ENOMEM;
+		if (total > c->max_interfaces)
+			goto cont;
+
+		for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
+			if (rdev->wiphy.software_iftypes & BIT(iftype))
+				continue;
+			for (j = 0; j < c->n_limits; j++) {
+				if (!(limits[j].types & iftype))
+					continue;
+				if (limits[j].max < num[iftype])
+					goto cont;
+				limits[j].max -= num[iftype];
+			}
+		}
+		/* yay, it fits */
+		kfree(limits);
+		return 0;
+ cont:
+		kfree(limits);
+	}
+
+	return -EBUSY;
+}
-- 
cgit v1.2.3-58-ga151


From 57cf8043a64b56a10b9f194572548a3dfb62e596 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Fri, 13 May 2011 10:45:43 -0700
Subject: nl80211: Move peer link state definition to nl80211

These definitions need to be exposed now that we can set the peer link
states via NL80211_ATTR_STA_PLINK_STATE.  They were already being
(opaquely) reported by NL80211_STA_INFO_PLINK_STATE.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h   | 41 +++++++++++++++++++++++++--
 include/net/cfg80211.h    | 27 ------------------
 net/mac80211/cfg.c        |  6 ++--
 net/mac80211/mesh_plink.c | 72 +++++++++++++++++++++++------------------------
 net/mac80211/rx.c         |  2 +-
 net/mac80211/sta_info.c   |  2 +-
 net/mac80211/sta_info.h   |  6 ++--
 net/wireless/nl80211.c    |  2 +-
 8 files changed, 83 insertions(+), 75 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 0ea497cb607c..fc3a94821b1e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -973,9 +973,10 @@ enum nl80211_commands {
  * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
  *	allows auth frames in a mesh to be passed to userspace for processing via
  *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link. Used when
- *      userspace is driving the peer link management state machine.
- *      @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ *	defined in &enum nl80211_plink_state. Used when userspace is
+ *	driving the peer link management state machine.
+ *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
  *
  * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
  *	the supported WoWLAN triggers
@@ -1396,6 +1397,7 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_LLID: the station's mesh LLID
  * @NL80211_STA_INFO_PLID: the station's mesh PLID
  * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ *	(see %enum nl80211_plink_state)
  * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
  *	attribute, like NL80211_STA_INFO_TX_BITRATE.
  * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
@@ -2326,4 +2328,37 @@ enum nl80211_if_combination_attrs {
 	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
 };
 
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ *	state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ *	this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ *	from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ *	received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ *	plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+	NL80211_PLINK_LISTEN,
+	NL80211_PLINK_OPN_SNT,
+	NL80211_PLINK_OPN_RCVD,
+	NL80211_PLINK_CNF_RCVD,
+	NL80211_PLINK_ESTAB,
+	NL80211_PLINK_HOLDING,
+	NL80211_PLINK_BLOCKED,
+
+	/* keep last */
+	NUM_NL80211_PLINK_STATES,
+	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 04afcfb9eaf4..0a2d795d35de 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -371,33 +371,6 @@ enum plink_actions {
 	PLINK_ACTION_BLOCK,
 };
 
-/**
- * enum plink_states - state of a mesh peer link finite state machine
- *
- * @PLINK_LISTEN: initial state, considered the implicit state of non
- * existant mesh peer links
- * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh
- * peer @PLINK_OPN_RCVD: mesh plink open frame has been received from
- * this mesh peer
- * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from
- * this mesh peer
- * @PLINK_ESTAB: mesh peer link is established
- * @PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @PLINK_BLOCKED: all frames transmitted from this mesh plink are
- * discarded
- * @PLINK_INVALID: reserved
- */
-enum plink_state {
-	PLINK_LISTEN,
-	PLINK_OPN_SNT,
-	PLINK_OPN_RCVD,
-	PLINK_CNF_RCVD,
-	PLINK_ESTAB,
-	PLINK_HOLDING,
-	PLINK_BLOCKED,
-	PLINK_INVALID,
-};
-
 /**
  * struct station_parameters - station parameters
  *
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 6ecd5862735d..be70c70d3f5b 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -730,9 +730,9 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 #ifdef CONFIG_MAC80211_MESH
 		if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED)
 			switch (params->plink_state) {
-			case PLINK_LISTEN:
-			case PLINK_ESTAB:
-			case PLINK_BLOCKED:
+			case NL80211_PLINK_LISTEN:
+			case NL80211_PLINK_ESTAB:
+			case NL80211_PLINK_BLOCKED:
 				sta->plink_state = params->plink_state;
 				break;
 			default:
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 2c37bee3095a..f4adc0917888 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -83,7 +83,7 @@ void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
  */
 static inline void mesh_plink_fsm_restart(struct sta_info *sta)
 {
-	sta->plink_state = PLINK_LISTEN;
+	sta->plink_state = NL80211_PLINK_LISTEN;
 	sta->llid = sta->plid = sta->reason = 0;
 	sta->plink_retries = 0;
 }
@@ -126,11 +126,11 @@ static bool __mesh_plink_deactivate(struct sta_info *sta)
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 	bool deactivated = false;
 
-	if (sta->plink_state == PLINK_ESTAB) {
+	if (sta->plink_state == NL80211_PLINK_ESTAB) {
 		mesh_plink_dec_estab_count(sdata);
 		deactivated = true;
 	}
-	sta->plink_state = PLINK_BLOCKED;
+	sta->plink_state = NL80211_PLINK_BLOCKED;
 	mesh_path_flush_by_nexthop(sta);
 
 	return deactivated;
@@ -268,7 +268,7 @@ void mesh_neighbour_update(u8 *hw_addr, u32 rates,
 	sta->last_rx = jiffies;
 	sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
 	if (mesh_peer_accepts_plinks(elems) &&
-			sta->plink_state == PLINK_LISTEN &&
+			sta->plink_state == NL80211_PLINK_LISTEN &&
 			sdata->u.mesh.accepting_plinks &&
 			sdata->u.mesh.mshcfg.auto_open_plinks)
 		mesh_plink_open(sta);
@@ -308,8 +308,8 @@ static void mesh_plink_timer(unsigned long data)
 	sdata = sta->sdata;
 
 	switch (sta->plink_state) {
-	case PLINK_OPN_RCVD:
-	case PLINK_OPN_SNT:
+	case NL80211_PLINK_OPN_RCVD:
+	case NL80211_PLINK_OPN_SNT:
 		/* retry timer */
 		if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
 			u32 rand;
@@ -328,17 +328,17 @@ static void mesh_plink_timer(unsigned long data)
 		}
 		reason = cpu_to_le16(MESH_MAX_RETRIES);
 		/* fall through on else */
-	case PLINK_CNF_RCVD:
+	case NL80211_PLINK_CNF_RCVD:
 		/* confirm timer */
 		if (!reason)
 			reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT);
-		sta->plink_state = PLINK_HOLDING;
+		sta->plink_state = NL80211_PLINK_HOLDING;
 		mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 		spin_unlock_bh(&sta->lock);
 		mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid,
 				    reason);
 		break;
-	case PLINK_HOLDING:
+	case NL80211_PLINK_HOLDING:
 		/* holding timer */
 		del_timer(&sta->plink_timer);
 		mesh_plink_fsm_restart(sta);
@@ -386,11 +386,11 @@ int mesh_plink_open(struct sta_info *sta)
 	spin_lock_bh(&sta->lock);
 	get_random_bytes(&llid, 2);
 	sta->llid = llid;
-	if (sta->plink_state != PLINK_LISTEN) {
+	if (sta->plink_state != NL80211_PLINK_LISTEN) {
 		spin_unlock_bh(&sta->lock);
 		return -EBUSY;
 	}
-	sta->plink_state = PLINK_OPN_SNT;
+	sta->plink_state = NL80211_PLINK_OPN_SNT;
 	mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
 	spin_unlock_bh(&sta->lock);
 	mpl_dbg("Mesh plink: starting establishment with %pM\n",
@@ -407,7 +407,7 @@ void mesh_plink_block(struct sta_info *sta)
 
 	spin_lock_bh(&sta->lock);
 	deactivated = __mesh_plink_deactivate(sta);
-	sta->plink_state = PLINK_BLOCKED;
+	sta->plink_state = NL80211_PLINK_BLOCKED;
 	spin_unlock_bh(&sta->lock);
 
 	if (deactivated)
@@ -430,13 +430,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	__le16 plid, llid, reason;
 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 	static const char *mplstates[] = {
-		[PLINK_LISTEN] = "LISTEN",
-		[PLINK_OPN_SNT] = "OPN-SNT",
-		[PLINK_OPN_RCVD] = "OPN-RCVD",
-		[PLINK_CNF_RCVD] = "CNF_RCVD",
-		[PLINK_ESTAB] = "ESTAB",
-		[PLINK_HOLDING] = "HOLDING",
-		[PLINK_BLOCKED] = "BLOCKED"
+		[NL80211_PLINK_LISTEN] = "LISTEN",
+		[NL80211_PLINK_OPN_SNT] = "OPN-SNT",
+		[NL80211_PLINK_OPN_RCVD] = "OPN-RCVD",
+		[NL80211_PLINK_CNF_RCVD] = "CNF_RCVD",
+		[NL80211_PLINK_ESTAB] = "ESTAB",
+		[NL80211_PLINK_HOLDING] = "HOLDING",
+		[NL80211_PLINK_BLOCKED] = "BLOCKED"
 	};
 #endif
 
@@ -502,7 +502,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		return;
 	}
 
-	if (sta && sta->plink_state == PLINK_BLOCKED) {
+	if (sta && sta->plink_state == NL80211_PLINK_BLOCKED) {
 		rcu_read_unlock();
 		return;
 	}
@@ -572,7 +572,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 				event = CNF_ACPT;
 			break;
 		case PLINK_CLOSE:
-			if (sta->plink_state == PLINK_ESTAB)
+			if (sta->plink_state == NL80211_PLINK_ESTAB)
 				/* Do not check for llid or plid. This does not
 				 * follow the standard but since multiple plinks
 				 * per sta are not supported, it is necessary in
@@ -607,14 +607,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	reason = 0;
 	switch (sta->plink_state) {
 		/* spin_unlock as soon as state is updated at each case */
-	case PLINK_LISTEN:
+	case NL80211_PLINK_LISTEN:
 		switch (event) {
 		case CLS_ACPT:
 			mesh_plink_fsm_restart(sta);
 			spin_unlock_bh(&sta->lock);
 			break;
 		case OPN_ACPT:
-			sta->plink_state = PLINK_OPN_RCVD;
+			sta->plink_state = NL80211_PLINK_OPN_RCVD;
 			sta->plid = plid;
 			get_random_bytes(&llid, 2);
 			sta->llid = llid;
@@ -631,7 +631,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 		break;
 
-	case PLINK_OPN_SNT:
+	case NL80211_PLINK_OPN_SNT:
 		switch (event) {
 		case OPN_RJCT:
 		case CNF_RJCT:
@@ -640,7 +640,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			if (!reason)
 				reason = cpu_to_le16(MESH_CLOSE_RCVD);
 			sta->reason = reason;
-			sta->plink_state = PLINK_HOLDING;
+			sta->plink_state = NL80211_PLINK_HOLDING;
 			if (!mod_plink_timer(sta,
 					     dot11MeshHoldingTimeout(sdata)))
 				sta->ignore_plink_timer = true;
@@ -652,7 +652,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			break;
 		case OPN_ACPT:
 			/* retry timer is left untouched */
-			sta->plink_state = PLINK_OPN_RCVD;
+			sta->plink_state = NL80211_PLINK_OPN_RCVD;
 			sta->plid = plid;
 			llid = sta->llid;
 			spin_unlock_bh(&sta->lock);
@@ -660,7 +660,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 					    plid, 0);
 			break;
 		case CNF_ACPT:
-			sta->plink_state = PLINK_CNF_RCVD;
+			sta->plink_state = NL80211_PLINK_CNF_RCVD;
 			if (!mod_plink_timer(sta,
 					     dot11MeshConfirmTimeout(sdata)))
 				sta->ignore_plink_timer = true;
@@ -673,7 +673,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 		break;
 
-	case PLINK_OPN_RCVD:
+	case NL80211_PLINK_OPN_RCVD:
 		switch (event) {
 		case OPN_RJCT:
 		case CNF_RJCT:
@@ -682,7 +682,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			if (!reason)
 				reason = cpu_to_le16(MESH_CLOSE_RCVD);
 			sta->reason = reason;
-			sta->plink_state = PLINK_HOLDING;
+			sta->plink_state = NL80211_PLINK_HOLDING;
 			if (!mod_plink_timer(sta,
 					     dot11MeshHoldingTimeout(sdata)))
 				sta->ignore_plink_timer = true;
@@ -700,7 +700,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			break;
 		case CNF_ACPT:
 			del_timer(&sta->plink_timer);
-			sta->plink_state = PLINK_ESTAB;
+			sta->plink_state = NL80211_PLINK_ESTAB;
 			spin_unlock_bh(&sta->lock);
 			mesh_plink_inc_estab_count(sdata);
 			ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
@@ -713,7 +713,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 		break;
 
-	case PLINK_CNF_RCVD:
+	case NL80211_PLINK_CNF_RCVD:
 		switch (event) {
 		case OPN_RJCT:
 		case CNF_RJCT:
@@ -722,7 +722,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			if (!reason)
 				reason = cpu_to_le16(MESH_CLOSE_RCVD);
 			sta->reason = reason;
-			sta->plink_state = PLINK_HOLDING;
+			sta->plink_state = NL80211_PLINK_HOLDING;
 			if (!mod_plink_timer(sta,
 					     dot11MeshHoldingTimeout(sdata)))
 				sta->ignore_plink_timer = true;
@@ -734,7 +734,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			break;
 		case OPN_ACPT:
 			del_timer(&sta->plink_timer);
-			sta->plink_state = PLINK_ESTAB;
+			sta->plink_state = NL80211_PLINK_ESTAB;
 			spin_unlock_bh(&sta->lock);
 			mesh_plink_inc_estab_count(sdata);
 			ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
@@ -749,13 +749,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		}
 		break;
 
-	case PLINK_ESTAB:
+	case NL80211_PLINK_ESTAB:
 		switch (event) {
 		case CLS_ACPT:
 			reason = cpu_to_le16(MESH_CLOSE_RCVD);
 			sta->reason = reason;
 			deactivated = __mesh_plink_deactivate(sta);
-			sta->plink_state = PLINK_HOLDING;
+			sta->plink_state = NL80211_PLINK_HOLDING;
 			llid = sta->llid;
 			mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 			spin_unlock_bh(&sta->lock);
@@ -775,7 +775,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			break;
 		}
 		break;
-	case PLINK_HOLDING:
+	case NL80211_PLINK_HOLDING:
 		switch (event) {
 		case CLS_ACPT:
 			if (del_timer(&sta->plink_timer))
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 1b9413fb3839..3a9515cb7ce1 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -490,7 +490,7 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
 	 * establisment frame, beacon or probe, drop the frame.
 	 */
 
-	if (!rx->sta || sta_plink_state(rx->sta) != PLINK_ESTAB) {
+	if (!rx->sta || sta_plink_state(rx->sta) != NL80211_PLINK_ESTAB) {
 		struct ieee80211_mgmt *mgmt;
 
 		if (!ieee80211_is_mgmt(hdr->frame_control))
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 82ab6b4643fc..4a15f9603562 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -277,7 +277,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
 
 #ifdef CONFIG_MAC80211_MESH
-	sta->plink_state = PLINK_LISTEN;
+	sta->plink_state = NL80211_PLINK_LISTEN;
 	init_timer(&sta->plink_timer);
 #endif
 
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index d6b566076f05..c6ae8718bd57 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -318,7 +318,7 @@ struct sta_info {
 	u8 plink_retries;
 	bool ignore_plink_timer;
 	bool plink_timer_was_running;
-	enum plink_state plink_state;
+	enum nl80211_plink_state plink_state;
 	u32 plink_timeout;
 	struct timer_list plink_timer;
 #endif
@@ -336,12 +336,12 @@ struct sta_info {
 	struct ieee80211_sta sta;
 };
 
-static inline enum plink_state sta_plink_state(struct sta_info *sta)
+static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta)
 {
 #ifdef CONFIG_MAC80211_MESH
 	return sta->plink_state;
 #endif
-	return PLINK_LISTEN;
+	return NL80211_PLINK_LISTEN;
 }
 
 static inline void set_sta_flags(struct sta_info *sta, const u32 flags)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index beac296b1fde..2222ce08ee91 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2335,7 +2335,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	memset(&params, 0, sizeof(params));
 
 	params.listen_interval = -1;
-	params.plink_state = PLINK_INVALID;
+	params.plink_state = -1;
 
 	if (info->attrs[NL80211_ATTR_STA_AID])
 		return -EINVAL;
-- 
cgit v1.2.3-58-ga151


From 449f4544267e73d5db372971da63634707c32299 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 19 May 2011 12:24:16 +0000
Subject: macvlan: remove one synchronize_rcu() call

When one macvlan device is dismantled, we can avoid one
synchronize_rcu() call done after deletion from hash list, since caller
will perform a synchronize_net() call after its ndo_stop() call.

Add a new netdev->dismantle field to signal this dismantle intent.

Reduces RTNL hold time.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
CC: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvlan.c     | 9 +++++----
 include/linux/netdevice.h | 4 +++-
 net/core/dev.c            | 2 +-
 3 files changed, 9 insertions(+), 6 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index d7c0bc62da7f..07bcb8084d78 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -70,16 +70,17 @@ static void macvlan_hash_add(struct macvlan_dev *vlan)
 	hlist_add_head_rcu(&vlan->hlist, &port->vlan_hash[addr[5]]);
 }
 
-static void macvlan_hash_del(struct macvlan_dev *vlan)
+static void macvlan_hash_del(struct macvlan_dev *vlan, bool sync)
 {
 	hlist_del_rcu(&vlan->hlist);
-	synchronize_rcu();
+	if (sync)
+		synchronize_rcu();
 }
 
 static void macvlan_hash_change_addr(struct macvlan_dev *vlan,
 					const unsigned char *addr)
 {
-	macvlan_hash_del(vlan);
+	macvlan_hash_del(vlan, true);
 	/* Now that we are unhashed it is safe to change the device
 	 * address without confusing packet delivery.
 	 */
@@ -345,7 +346,7 @@ static int macvlan_stop(struct net_device *dev)
 	dev_uc_del(lowerdev, dev->dev_addr);
 
 hash_del:
-	macvlan_hash_del(vlan);
+	macvlan_hash_del(vlan, !dev->dismantle);
 	return 0;
 }
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a134d809125b..ca333e79e10f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1293,7 +1293,9 @@ struct net_device {
 	       NETREG_UNREGISTERED,	/* completed unregister todo */
 	       NETREG_RELEASED,		/* called free_netdev */
 	       NETREG_DUMMY,		/* dummy device for NAPI poll */
-	} reg_state:16;
+	} reg_state:8;
+
+	bool dismantle; /* device is going do be freed */
 
 	enum {
 		RTNL_LINK_INITIALIZED,
diff --git a/net/core/dev.c b/net/core/dev.c
index 155de2094e71..d94537914a71 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5126,7 +5126,7 @@ static void rollback_registered_many(struct list_head *head)
 			list_del(&dev->unreg_list);
 			continue;
 		}
-
+		dev->dismantle = true;
 		BUG_ON(dev->reg_state != NETREG_REGISTERED);
 	}
 
-- 
cgit v1.2.3-58-ga151