From e0de91a977bfe4c199138fa256a211a648ef6999 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 21 Jun 2017 15:29:15 +0200 Subject: irqchip/irq-mvebu-icu: Add new driver for Marvell ICU The Marvell ICU unit is found in the CP110 block of the Marvell Armada 7K and 8K SoCs. It collects the wired interrupts of the devices located in the CP110 and turns them into SPI interrupts in the GIC located in the AP806 side of the SoC, by using a memory transaction. Until now, the ICU was configured in a static fashion by the firmware, and Linux was relying on this static configuration. By having Linux configure the ICU, we are more flexible, and we can allocate dynamically the GIC SPI interrupts only for devices that are actually in use. The driver was initially written by Hanna Hawa . Reviewed-by: Marc Zyngier Signed-off-by: Thomas Petazzoni Signed-off-by: Marc Zyngier --- include/dt-bindings/interrupt-controller/mvebu-icu.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 include/dt-bindings/interrupt-controller/mvebu-icu.h (limited to 'include/dt-bindings/interrupt-controller/mvebu-icu.h') diff --git a/include/dt-bindings/interrupt-controller/mvebu-icu.h b/include/dt-bindings/interrupt-controller/mvebu-icu.h new file mode 100644 index 000000000000..8249558545c7 --- /dev/null +++ b/include/dt-bindings/interrupt-controller/mvebu-icu.h @@ -0,0 +1,15 @@ +/* + * This header provides constants for the MVEBU ICU driver. + */ + +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MVEBU_ICU_H +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MVEBU_ICU_H + +/* interrupt specifier cell 0 */ + +#define ICU_GRP_NSR 0x0 +#define ICU_GRP_SR 0x1 +#define ICU_GRP_SEI 0x4 +#define ICU_GRP_REI 0x5 + +#endif -- cgit v1.2.3-58-ga151