From 0d0988af81ac809b30f818f0c0f065327ff6423b Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Thu, 5 Feb 2015 16:27:03 +0800 Subject: ACPICA: Events: Introduce ACPI_GPE_DISPATCH_RAW_HANDLER to fix 2 issues for the current GPE APIs ACPICA commit 199cad16530a45aea2bec98e528866e20c5927e1 Since whether the GPE should be disabled/enabled/cleared should only be determined by the GPE driver's state machine: 1. GPE should be disabled if the driver wants to switch to the GPE polling mode when a GPE storm condition is indicated and should be enabled if the driver wants to switch back to the GPE interrupt mode when all of the storm conditions are cleared. The conditions should be protected by the driver's specific lock. 2. GPE should be enabled if the driver has accepted more than one request and should be disabled if the driver has completed all of the requests. The request count should be protected by the driver's specific lock. 3. GPE should be cleared either when the driver is about to handle an edge triggered GPE or when the driver has completed to handle a level triggered GPE. The handling code should be protected by the driver's specific lock. Thus the GPE enabling/disabling/clearing operations are likely to be performed with the driver's specific lock held while we currently cannot do this. This is because: 1. We have the acpi_gbl_gpe_lock held before invoking the GPE driver's handler. Driver's specific lock is likely to be held inside of the handler, thus we can see some dead lock issues due to the reversed locking order or recursive locking. In order to solve such dead lock issues, we need to unlock the acpi_gbl_gpe_lock before invoking the handler. BZ 1100. 2. Since GPE disabling/enabling/clearing should be determined by the GPE driver's state machine, we shouldn't perform such operations inside of ACPICA for a GPE handler to mess up the driver's state machine. BZ 1101. Originally this patch includes a logic to flush GPE handlers, it is dropped due to the following reasons: 1. This is a different issue; 2. Linux OSL has fixed this by flushing SCI in acpi_os_wait_events_complete(). We will pick up this topic when the Linux OSL fix turns out to be not sufficient. Note that currently the internal operations and the acpi_gbl_gpe_lock are also used by ACPI_GPE_DISPATCH_METHOD and ACPI_GPE_DISPATCH_NOTIFY. In order not to introduce regressions, we add one ACPI_GPE_DISPATCH_RAW_HANDLER type to be distiguished from ACPI_GPE_DISPATCH_HANDLER. For which the acpi_gbl_gpe_lock is unlocked before invoking the GPE handler and the internal enabling/disabling operations are bypassed to allow drivers to perform them at a proper position using the GPE APIs and ACPI_GPE_DISPATCH_RAW_HANDLER users should invoke acpi_set_gpe() instead of acpi_enable_gpe()/acpi_disable_gpe() to bypass the internal GPE clearing code in acpi_enable_gpe(). Lv Zheng. Known issues: 1. Edge-triggered GPE lost for frequent enablings On some buggy silicon platforms, GPE enable line may not be directly wired to the GPE trigger line. In that case, when GPE enabling is frequently performed for edge-triggered GPEs, GPE status may stay set without being triggered. This patch may maginify this problem as it allows GPE enabling to be parallel performed during the process the GPEs are handled. This is an existing issue, because: 1. For task context: Current ACPI_GPE_DISPATCH_METHOD practices have proven that this isn't a real issue - we can re-enable edge-triggered GPE in a work queue where the GPE status bit might already be set. 2. For IRQ context: This can even happen when the GPE enabling occurs before returning from the GPE handler and after unlocking the GPE lock. Thus currently no code is included to protect this. Link: https://github.com/acpica/acpica/commit/199cad16 Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki --- include/acpi/acpixf.h | 8 ++++++++ include/acpi/actypes.h | 11 ++++++----- 2 files changed, 14 insertions(+), 5 deletions(-) (limited to 'include/acpi') diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 96e4ef3668d8..d56f5d722138 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -568,6 +568,14 @@ ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_gpe_handler address, void *context)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_gpe_raw_handler(acpi_handle + gpe_device, + u32 gpe_number, + u32 type, + acpi_gpe_handler + address, + void *context)) ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_remove_gpe_handler(acpi_handle gpe_device, u32 gpe_number, diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 453cebb430f6..b034f1068dfe 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -744,7 +744,7 @@ typedef u32 acpi_event_status; /* * GPE info flags - Per GPE * +-------+-+-+---+ - * | 7:4 |3|2|1:0| + * | 7:5 |4|3|2:0| * +-------+-+-+---+ * | | | | * | | | +-- Type of dispatch:to method, handler, notify, or none @@ -756,14 +756,15 @@ typedef u32 acpi_event_status; #define ACPI_GPE_DISPATCH_METHOD (u8) 0x01 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02 #define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03 -#define ACPI_GPE_DISPATCH_MASK (u8) 0x03 +#define ACPI_GPE_DISPATCH_RAW_HANDLER (u8) 0x04 +#define ACPI_GPE_DISPATCH_MASK (u8) 0x07 #define ACPI_GPE_DISPATCH_TYPE(flags) ((u8) ((flags) & ACPI_GPE_DISPATCH_MASK)) -#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x04 +#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x08 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 -#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x04 +#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08 -#define ACPI_GPE_CAN_WAKE (u8) 0x08 +#define ACPI_GPE_CAN_WAKE (u8) 0x10 /* * Flags for GPE and Lock interfaces -- cgit v1.2.3-58-ga151