From fe202fde50a986a8510c62a76dc8733c1a8fac86 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 5 Aug 2011 21:45:11 +0200 Subject: PM / Domains: Fix pm_genpd_poweron() The local variable ret is defined twice in pm_genpd_poweron(), which causes this function to always return 0, even if the PM domain's .power_on() callback fails, in which case an error code should be returned. Remove the wrong second definition of ret and additionally remove an unnecessary definition of wait from pm_genpd_poweron(). Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index be8714aa9dd6..e18566a0fedd 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -80,7 +80,6 @@ static void genpd_set_active(struct generic_pm_domain *genpd) int pm_genpd_poweron(struct generic_pm_domain *genpd) { struct generic_pm_domain *parent = genpd->parent; - DEFINE_WAIT(wait); int ret = 0; start: @@ -112,7 +111,7 @@ int pm_genpd_poweron(struct generic_pm_domain *genpd) } if (genpd->power_on) { - int ret = genpd->power_on(genpd); + ret = genpd->power_on(genpd); if (ret) goto out; } -- cgit v1.2.3-58-ga151 From 02b26774afebb2d62695ba3230319d70d8c6cc2d Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 5 Aug 2011 21:45:20 +0200 Subject: PM / Runtime: Allow _put_sync() from interrupts-disabled context Currently the use of pm_runtime_put_sync() is not safe from interrupts-disabled context because rpm_idle() will release the spinlock and enable interrupts for the idle callbacks. This enables interrupts during a time where interrupts were expected to be disabled, and can have strange side effects on drivers that expected interrupts to be disabled. This is not a bug since the documentation clearly states that only _put_sync_suspend() is safe in IRQ-safe mode. However, pm_runtime_put_sync() could be made safe when in IRQ-safe mode by releasing the spinlock but not re-enabling interrupts, which is what this patch aims to do. Problem was found when using some buggy drivers that set pm_runtime_irq_safe() and used _put_sync() in interrupts-disabled context. Reported-by: Colin Cross Tested-by: Nishanth Menon Signed-off-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki --- Documentation/power/runtime_pm.txt | 10 +++++----- drivers/base/power/runtime.c | 10 ++++++++-- 2 files changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 14dd3c6ad97e..4ce5450ab6e8 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -54,11 +54,10 @@ referred to as subsystem-level callbacks in what follows. By default, the callbacks are always invoked in process context with interrupts enabled. However, subsystems can use the pm_runtime_irq_safe() helper function to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume() -callbacks should be invoked in atomic context with interrupts disabled -(->runtime_idle() is still invoked the default way). This implies that these -callback routines must not block or sleep, but it also means that the -synchronous helper functions listed at the end of Section 4 can be used within -an interrupt handler or in an atomic context. +callbacks should be invoked in atomic context with interrupts disabled. +This implies that these callback routines must not block or sleep, but it also +means that the synchronous helper functions listed at the end of Section 4 can +be used within an interrupt handler or in an atomic context. The subsystem-level suspend callback is _entirely_ _responsible_ for handling the suspend of the device as appropriate, which may, but need not include @@ -483,6 +482,7 @@ pm_runtime_suspend() pm_runtime_autosuspend() pm_runtime_resume() pm_runtime_get_sync() +pm_runtime_put_sync() pm_runtime_put_sync_suspend() 5. Runtime PM Initialization, Device Probing and Removal diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 8dc247c974af..acb3f83b8079 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -226,11 +226,17 @@ static int rpm_idle(struct device *dev, int rpmflags) callback = NULL; if (callback) { - spin_unlock_irq(&dev->power.lock); + if (dev->power.irq_safe) + spin_unlock(&dev->power.lock); + else + spin_unlock_irq(&dev->power.lock); callback(dev); - spin_lock_irq(&dev->power.lock); + if (dev->power.irq_safe) + spin_lock(&dev->power.lock); + else + spin_lock_irq(&dev->power.lock); } dev->power.idle_notification = false; -- cgit v1.2.3-58-ga151