From f42259ef810ce83f3e1a8ea4ce12dfda873fbe44 Mon Sep 17 00:00:00 2001 From: Hang Yuan Date: Wed, 19 Sep 2018 14:42:09 +0800 Subject: drm/i915/gvt: invalidate old ggtt page when update ggtt entry Previously only cancelled dma map of a ggtt page when the ggtt entry was cleared. This patch will cancel dma map of an old ggtt page as well when the ggtt entry is updated with new page address. Fixes: 7598e8700e9a(drm/i915/gvt: Missed to cancel dma map for ggtt entries) Signed-off-by: Hang Yuan Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index 00aad8164dec..c11e353ca904 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -2259,16 +2259,18 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off, } else ops->set_pfn(&m, dma_addr >> PAGE_SHIFT); } else { - ggtt_get_host_entry(ggtt_mm, &m, g_gtt_index); - ggtt_invalidate_pte(vgpu, &m); ops->set_pfn(&m, gvt->gtt.scratch_mfn); ops->clear_present(&m); } out: + ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index); + + ggtt_get_host_entry(ggtt_mm, &e, g_gtt_index); + ggtt_invalidate_pte(vgpu, &e); + ggtt_set_host_entry(ggtt_mm, &m, g_gtt_index); ggtt_invalidate(gvt->dev_priv); - ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index); return 0; } -- cgit v1.2.3-58-ga151 From 202dc3cc10b4d37e5251431acf8d5040a8876c7d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 9 Oct 2018 19:41:58 +0200 Subject: serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before the DMA channel pointer is initialized. Hence this fails, and the driver tries to fall back to PIO. However, at this early phase in the initialization sequence, fallback to PIO does not work, leading to a serial port that cannot receive any data. Fix this by calling sci_submit_rx() after initialization of the DMA channel pointer. Reported-by: Yoshihiro Shimoda Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Tested-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index ab3f6e91853d..e19bfbba8a01 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1614,10 +1614,10 @@ static void sci_request_dma(struct uart_port *port) hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); s->rx_timer.function = rx_timer_fn; + s->chan_rx_saved = s->chan_rx = chan; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) sci_submit_rx(s); - - s->chan_rx_saved = s->chan_rx = chan; } } -- cgit v1.2.3-58-ga151 From 1b50bb4d36e89fd54c14722c4ab5266ef17767ff Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 24 Oct 2018 22:44:39 +0200 Subject: Fix pattern handling optimalization Check for zero duration before skipping step. This fixes pattern echo "0 1000 10 2550 0 1000" > pattern which should do [ .-xXx-.] but does [ Xx-.] Signed-off-by: Pavel Machek Suggested-by: Jacek Anaszewski Signed-off-by: Jacek Anaszewski --- drivers/leds/trigger/ledtrig-pattern.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c index ce7acd115dd8..174a298f1be0 100644 --- a/drivers/leds/trigger/ledtrig-pattern.c +++ b/drivers/leds/trigger/ledtrig-pattern.c @@ -87,9 +87,10 @@ static void pattern_trig_timer_function(struct timer_list *t) data->curr->brightness); mod_timer(&data->timer, jiffies + msecs_to_jiffies(data->curr->delta_t)); - - /* Skip the tuple with zero duration */ - pattern_trig_update_patterns(data); + if (!data->next->delta_t) { + /* Skip the tuple with zero duration */ + pattern_trig_update_patterns(data); + } /* Select next tuple */ pattern_trig_update_patterns(data); } else { -- cgit v1.2.3-58-ga151 From f11274396a538b31bc010f782e05c2ce3f804c13 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 19 Oct 2018 17:01:33 -0300 Subject: HID: hiddev: fix potential Spectre v1 uref->usage_index can be indirectly controlled by userspace, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This field is used as an array index by the hiddev_ioctl_usage() function, when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or HIDIOCSUSAGES. For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to field->maxusage and then used as an index to dereference field->usage array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where uref->usage_index is checked against an array maximum value and then it is used as an index in an array. This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the traditional Spectre V1 first load: copy_from_user(uref, user_arg, sizeof(*uref)) if (uref->usage_index >= field->maxusage) goto inval; i = field->usage[uref->usage_index].collection_index; return i; This patch fixes this by sanitizing field uref->usage_index before using it to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load. Cc: Signed-off-by: Breno Leitao -- v2: Contemplate cmd == HIDIOC{G,S}USAGES case Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 23872d08308c..a746017fac17 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -512,14 +512,24 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, if (cmd == HIDIOCGCOLLECTIONINDEX) { if (uref->usage_index >= field->maxusage) goto inval; + uref->usage_index = + array_index_nospec(uref->usage_index, + field->maxusage); } else if (uref->usage_index >= field->report_count) goto inval; } - if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) && - (uref_multi->num_values > HID_MAX_MULTI_USAGES || - uref->usage_index + uref_multi->num_values > field->report_count)) - goto inval; + if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) { + if (uref_multi->num_values > HID_MAX_MULTI_USAGES || + uref->usage_index + uref_multi->num_values > + field->report_count) + goto inval; + + uref->usage_index = + array_index_nospec(uref->usage_index, + field->report_count - + uref_multi->num_values); + } switch (cmd) { case HIDIOCGUSAGE: -- cgit v1.2.3-58-ga151 From 00b790ea545b6ef30221adef6e9c3707e03b82b5 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 5 Oct 2018 12:46:29 +0800 Subject: HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel Raydium touchpanel (2386:4B33) sometimes does not work in desktop session although it works in display manager. During user logging, the display manager exits, close the HID device, then the device gets runtime suspended and powered off. The desktop session begins shortly after, opens the HID device, then the device gets runtime resumed and powered on. If the trasition from display manager to desktop sesesion is fast, the touchpanel cannot switch from powered off to powered on in short timeframe. So add a small delay to workaround the issue. Signed-off-by: Kai-Heng Feng Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/i2c-hid/i2c-hid-core.c | 19 +++++++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f63489c882bb..c0d668944dbe 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -927,6 +927,9 @@ #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008 +#define I2C_VENDOR_ID_RAYDIUM 0x2386 +#define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33 + #define USB_VENDOR_ID_RAZER 0x1532 #define USB_DEVICE_ID_RAZER_BLADE_14 0x011D diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 4aab96cf0818..3cde7c1b9c33 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -49,6 +49,7 @@ #define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0) #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1) #define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2) +#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3) /* flags */ #define I2C_HID_STARTED 0 @@ -158,6 +159,8 @@ struct i2c_hid { bool irq_wake_enabled; struct mutex reset_lock; + + unsigned long sleep_delay; }; static const struct i2c_hid_quirks { @@ -172,6 +175,8 @@ static const struct i2c_hid_quirks { { I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288, I2C_HID_QUIRK_NO_IRQ_AFTER_RESET | I2C_HID_QUIRK_NO_RUNTIME_PM }, + { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33, + I2C_HID_QUIRK_DELAY_AFTER_SLEEP }, { 0, 0 } }; @@ -387,6 +392,7 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state) { struct i2c_hid *ihid = i2c_get_clientdata(client); int ret; + unsigned long now, delay; i2c_hid_dbg(ihid, "%s\n", __func__); @@ -404,9 +410,22 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state) goto set_pwr_exit; } + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP && + power_state == I2C_HID_PWR_ON) { + now = jiffies; + if (time_after(ihid->sleep_delay, now)) { + delay = jiffies_to_usecs(ihid->sleep_delay - now); + usleep_range(delay, delay + 1); + } + } + ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state, 0, NULL, 0, NULL, 0); + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP && + power_state == I2C_HID_PWR_SLEEP) + ihid->sleep_delay = jiffies + msecs_to_jiffies(20); + if (ret) dev_err(&client->dev, "failed to change power setting.\n"); -- cgit v1.2.3-58-ga151 From 6298944d8f57f40ee2a3e6dcea1253e78d7a9969 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 17 Oct 2018 09:01:53 +0200 Subject: Revert "HID: add NOGET quirk for Eaton Ellipse MAX UPS" This reverts commit 67ddbb3e6568fb1820b2cc45b00c50702b114801. 67ddbb3e656 ("HID: add NOGET quirk for Eaton Ellipse MAX UPS") was reported by Laurent Bigonville. It turns out that a later model Laurent got doesn't need the quirk after all. My take is that Eaton upgraded their firmwares, so we don't need it anymore. The old model was from 2012, so better make sure the new line works properly by removing the quirk. This allows upower to actually fetch the current data. Reported-by: Laurent Bigonville Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-quirks.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 52c3b01917e7..8237dd86fb17 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -107,7 +107,6 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT }, - { HID_USB_DEVICE(USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2), HID_QUIRK_NO_INIT_REPORTS }, -- cgit v1.2.3-58-ga151 From 7dd8db68949a7acc5bd528ee0ecb8f8720f49921 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Fri, 12 Oct 2018 16:05:25 +0200 Subject: HID: alps: allow incoming reports when only the trackstick is opened If userspace only reads the trackstick node, and no one is listening to the touchpad nor the hidraw node then, the device is not powered on. Add open/close callbacks to allow users to disable the touchpad in Gnome while keeping the trackstick active. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1559632 Link: https://gitlab.gnome.org/GNOME/mutter/issues/128 Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-alps.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c index aec253b44156..3cd7229b6e54 100644 --- a/drivers/hid/hid-alps.c +++ b/drivers/hid/hid-alps.c @@ -660,6 +660,20 @@ exit: return ret; } +static int alps_sp_open(struct input_dev *dev) +{ + struct hid_device *hid = input_get_drvdata(dev); + + return hid_hw_open(hid); +} + +static void alps_sp_close(struct input_dev *dev) +{ + struct hid_device *hid = input_get_drvdata(dev); + + hid_hw_close(hid); +} + static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi) { struct alps_dev *data = hid_get_drvdata(hdev); @@ -733,6 +747,10 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi) input2->id.version = input->id.version; input2->dev.parent = input->dev.parent; + input_set_drvdata(input2, hdev); + input2->open = alps_sp_open; + input2->close = alps_sp_close; + __set_bit(EV_KEY, input2->evbit); data->sp_btn_cnt = (data->sp_btn_info & 0x0F); for (i = 0; i < data->sp_btn_cnt; i++) -- cgit v1.2.3-58-ga151 From bc0686ff5fad7a842cc88377439e78be87fedc80 Mon Sep 17 00:00:00 2001 From: Hang Yuan Date: Wed, 19 Sep 2018 14:42:10 +0800 Subject: drm/i915/gvt: support inconsecutive partial gtt entry write Previously we assumed two 4-byte writes to the same PTE coming in sequence. But recently we observed inconsecutive partial write happening as well. So this patch enhances the previous solution. It now uses a list to save more partial writes. If one partial write can be combined with another one in the list to construct a full PTE, update its shadow entry. Otherwise, save the partial write in the list. v2: invalidate old entry and flush ggtt (Zhenyu) v3: split old ggtt page unmap to another patch (Zhenyu) v4: refine codes (Zhenyu) Signed-off-by: Hang Yuan Cc: Yan Zhao Cc: Xiaolin Zhang Cc: Zhenyu Wang Reviewed-by: Xiaolin Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 107 ++++++++++++++++++++--------------------- drivers/gpu/drm/i915/gvt/gtt.h | 9 +++- 2 files changed, 60 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index c11e353ca904..919de5a1bafb 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -1901,7 +1901,6 @@ static struct intel_vgpu_mm *intel_vgpu_create_ggtt_mm(struct intel_vgpu *vgpu) vgpu_free_mm(mm); return ERR_PTR(-ENOMEM); } - mm->ggtt_mm.last_partial_off = -1UL; return mm; } @@ -1926,7 +1925,6 @@ void _intel_vgpu_mm_release(struct kref *mm_ref) invalidate_ppgtt_mm(mm); } else { vfree(mm->ggtt_mm.virtual_ggtt); - mm->ggtt_mm.last_partial_off = -1UL; } vgpu_free_mm(mm); @@ -2164,6 +2162,8 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off, struct intel_gvt_gtt_entry e, m; dma_addr_t dma_addr; int ret; + struct intel_gvt_partial_pte *partial_pte, *pos, *n; + bool partial_update = false; if (bytes != 4 && bytes != 8) return -EINVAL; @@ -2174,68 +2174,57 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off, if (!vgpu_gmadr_is_valid(vgpu, gma)) return 0; - ggtt_get_guest_entry(ggtt_mm, &e, g_gtt_index); - + e.type = GTT_TYPE_GGTT_PTE; memcpy((void *)&e.val64 + (off & (info->gtt_entry_size - 1)), p_data, bytes); /* If ggtt entry size is 8 bytes, and it's split into two 4 bytes - * write, we assume the two 4 bytes writes are consecutive. - * Otherwise, we abort and report error + * write, save the first 4 bytes in a list and update virtual + * PTE. Only update shadow PTE when the second 4 bytes comes. */ if (bytes < info->gtt_entry_size) { - if (ggtt_mm->ggtt_mm.last_partial_off == -1UL) { - /* the first partial part*/ - ggtt_mm->ggtt_mm.last_partial_off = off; - ggtt_mm->ggtt_mm.last_partial_data = e.val64; - return 0; - } else if ((g_gtt_index == - (ggtt_mm->ggtt_mm.last_partial_off >> - info->gtt_entry_size_shift)) && - (off != ggtt_mm->ggtt_mm.last_partial_off)) { - /* the second partial part */ - - int last_off = ggtt_mm->ggtt_mm.last_partial_off & - (info->gtt_entry_size - 1); - - memcpy((void *)&e.val64 + last_off, - (void *)&ggtt_mm->ggtt_mm.last_partial_data + - last_off, bytes); - - ggtt_mm->ggtt_mm.last_partial_off = -1UL; - } else { - int last_offset; - - gvt_vgpu_err("failed to populate guest ggtt entry: abnormal ggtt entry write sequence, last_partial_off=%lx, offset=%x, bytes=%d, ggtt entry size=%d\n", - ggtt_mm->ggtt_mm.last_partial_off, off, - bytes, info->gtt_entry_size); - - /* set host ggtt entry to scratch page and clear - * virtual ggtt entry as not present for last - * partially write offset - */ - last_offset = ggtt_mm->ggtt_mm.last_partial_off & - (~(info->gtt_entry_size - 1)); - - ggtt_get_host_entry(ggtt_mm, &m, last_offset); - ggtt_invalidate_pte(vgpu, &m); - ops->set_pfn(&m, gvt->gtt.scratch_mfn); - ops->clear_present(&m); - ggtt_set_host_entry(ggtt_mm, &m, last_offset); - ggtt_invalidate(gvt->dev_priv); - - ggtt_get_guest_entry(ggtt_mm, &e, last_offset); - ops->clear_present(&e); - ggtt_set_guest_entry(ggtt_mm, &e, last_offset); - - ggtt_mm->ggtt_mm.last_partial_off = off; - ggtt_mm->ggtt_mm.last_partial_data = e.val64; + bool found = false; + + list_for_each_entry_safe(pos, n, + &ggtt_mm->ggtt_mm.partial_pte_list, list) { + if (g_gtt_index == pos->offset >> + info->gtt_entry_size_shift) { + if (off != pos->offset) { + /* the second partial part*/ + int last_off = pos->offset & + (info->gtt_entry_size - 1); + + memcpy((void *)&e.val64 + last_off, + (void *)&pos->data + last_off, + bytes); + + list_del(&pos->list); + kfree(pos); + found = true; + break; + } + + /* update of the first partial part */ + pos->data = e.val64; + ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index); + return 0; + } + } - return 0; + if (!found) { + /* the first partial part */ + partial_pte = kzalloc(sizeof(*partial_pte), GFP_KERNEL); + if (!partial_pte) + return -ENOMEM; + partial_pte->offset = off; + partial_pte->data = e.val64; + list_add_tail(&partial_pte->list, + &ggtt_mm->ggtt_mm.partial_pte_list); + partial_update = true; } } - if (ops->test_present(&e)) { + if (!partial_update && (ops->test_present(&e))) { gfn = ops->get_pfn(&e); m = e; @@ -2428,6 +2417,8 @@ int intel_vgpu_init_gtt(struct intel_vgpu *vgpu) intel_vgpu_reset_ggtt(vgpu, false); + INIT_LIST_HEAD(>t->ggtt_mm->ggtt_mm.partial_pte_list); + return create_scratch_page_tree(vgpu); } @@ -2452,6 +2443,14 @@ static void intel_vgpu_destroy_all_ppgtt_mm(struct intel_vgpu *vgpu) static void intel_vgpu_destroy_ggtt_mm(struct intel_vgpu *vgpu) { + struct intel_gvt_partial_pte *pos; + + list_for_each_entry(pos, + &vgpu->gtt.ggtt_mm->ggtt_mm.partial_pte_list, list) { + gvt_dbg_mm("partial PTE update on hold 0x%lx : 0x%llx\n", + pos->offset, pos->data); + kfree(pos); + } intel_vgpu_destroy_mm(vgpu->gtt.ggtt_mm); vgpu->gtt.ggtt_mm = NULL; } diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h index 7a9b36176efb..a11bfee1e0c8 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.h +++ b/drivers/gpu/drm/i915/gvt/gtt.h @@ -133,6 +133,12 @@ enum intel_gvt_mm_type { #define GVT_RING_CTX_NR_PDPS GEN8_3LVL_PDPES +struct intel_gvt_partial_pte { + unsigned long offset; + u64 data; + struct list_head list; +}; + struct intel_vgpu_mm { enum intel_gvt_mm_type type; struct intel_vgpu *vgpu; @@ -157,8 +163,7 @@ struct intel_vgpu_mm { } ppgtt_mm; struct { void *virtual_ggtt; - unsigned long last_partial_off; - u64 last_partial_data; + struct list_head partial_pte_list; } ggtt_mm; }; }; -- cgit v1.2.3-58-ga151 From 606a745944bc0ebd14f77dfc61ac7d6cb685cefe Mon Sep 17 00:00:00 2001 From: Xinyun Liu Date: Wed, 19 Sep 2018 15:28:53 +0800 Subject: drm/i915/gvt: correct mask setting for CSFE_CHICKEN1 CSFE_CHICKEN1(0x20d4) needs access with mask. This is caught in AcrnGT conformance check test: [drm:intel_gvt_vgpu_conformance_check] *ERROR* gvt: vgpu1 unconformance mmio 0x20d4:0x40004,0x4 Signed-off-by: Xinyun Liu Signed-off-by: Zhi Wang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/mmio_context.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c b/drivers/gpu/drm/i915/gvt/mmio_context.c index e872f4847fbe..088a62ab2bc8 100644 --- a/drivers/gpu/drm/i915/gvt/mmio_context.c +++ b/drivers/gpu/drm/i915/gvt/mmio_context.c @@ -144,7 +144,7 @@ static struct engine_mmio gen9_engine_mmio_list[] __cacheline_aligned = { {RCS, GAMT_CHKN_BIT_REG, 0x0, false}, /* 0x4ab8 */ {RCS, GEN9_GAMT_ECO_REG_RW_IA, 0x0, false}, /* 0x4ab0 */ - {RCS, GEN9_CSFE_CHICKEN1_RCS, 0x0, false}, /* 0x20d4 */ + {RCS, GEN9_CSFE_CHICKEN1_RCS, 0xffff, false}, /* 0x20d4 */ {RCS, GEN8_GARBCNTL, 0x0, false}, /* 0xb004 */ {RCS, GEN7_FF_THREAD_MODE, 0x0, false}, /* 0x20a0 */ -- cgit v1.2.3-58-ga151 From 5e7154ff5e8e21dc9acac4f8dba7533552365374 Mon Sep 17 00:00:00 2001 From: Longhe Zheng Date: Tue, 30 Oct 2018 16:12:10 +0800 Subject: drm/i915/gvt: Handle values of EDP_PSR_IMR and EDP_PSR_IIR GVT-g only simulates DP port for guest and leaves EDP_PSR_IMR and EDP_PSR_IIR registers as default MMIO read/write. So guest won't get expected initial values of these registers when initializing the gpu driver, which results in following warning and logs. -------- Interrupt register 0x64838 is not zero: 0xffffffff WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/i915/i915_irq.c:177 gen3_assert_iir_is_zero+0x38/0xa0 Call Trace: gen8_de_irq_postinstall+0xa7/0x400 gen8_irq_postinstall+0x27/0x80 drm_irq_install+0xbc/0x140 i915_driver_load+0xa9d/0xd50 -------- Because GVT-g does not handle EDP(embedded DP) simulation for guests, always set EDP_PSR_IMR and EDP_PSR_IIR to value 0. Signed-off-by: Longhe Zheng Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 94c1089ecf59..f9002cb1f2a3 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -1608,7 +1608,7 @@ static int bxt_gt_disp_pwron_write(struct intel_vgpu *vgpu, return 0; } -static int bxt_edp_psr_imr_iir_write(struct intel_vgpu *vgpu, +static int edp_psr_imr_iir_write(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes) { vgpu_vreg(vgpu, offset) = 0; @@ -2613,6 +2613,9 @@ static int init_generic_mmio_info(struct intel_gvt *gvt) MMIO_DFH(_MMIO(0x1a178), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL); MMIO_DFH(_MMIO(0x1a17c), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL); MMIO_DFH(_MMIO(0x2217c), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL); + + MMIO_DH(EDP_PSR_IMR, D_BDW_PLUS, NULL, edp_psr_imr_iir_write); + MMIO_DH(EDP_PSR_IIR, D_BDW_PLUS, NULL, edp_psr_imr_iir_write); return 0; } @@ -3216,9 +3219,6 @@ static int init_bxt_mmio_info(struct intel_gvt *gvt) MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_B), D_BXT); MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_C), D_BXT); - MMIO_DH(EDP_PSR_IMR, D_BXT, NULL, bxt_edp_psr_imr_iir_write); - MMIO_DH(EDP_PSR_IIR, D_BXT, NULL, bxt_edp_psr_imr_iir_write); - MMIO_D(RC6_CTX_BASE, D_BXT); MMIO_D(GEN8_PUSHBUS_CONTROL, D_BXT); -- cgit v1.2.3-58-ga151 From 399474e4c1100bca264ed14fa3ad0d68fab484d8 Mon Sep 17 00:00:00 2001 From: Julian Sax Date: Wed, 24 Oct 2018 22:40:26 +0200 Subject: HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Reported-by: Tim Aldridge Signed-off-by: Julian Sax Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index 1d645c9ab417..9ca2fcc48b5a 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -330,6 +330,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Direkt-Tek DTLAPY133-1", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY133-1"), + }, + .driver_data = (void *)&sipodev_desc + }, { .ident = "Mediacom Flexbook Edge 11", .matches = { -- cgit v1.2.3-58-ga151 From 7b900ead6cc66b2ee873cb042dfba169aa68b56c Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Wed, 31 Oct 2018 22:52:19 +0100 Subject: usbnet: smsc95xx: disable carrier check while suspending We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by: Frieder Schrempf Reviewed-by: Raghuram Chary J Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 262e7a3c23cb..2d17f3b9bb16 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1598,6 +1598,8 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) return ret; } + cancel_delayed_work_sync(&pdata->carrier_check); + if (pdata->suspend_flags) { netdev_warn(dev->net, "error during last resume\n"); pdata->suspend_flags = 0; @@ -1840,6 +1842,11 @@ done: */ if (ret && PMSG_IS_AUTO(message)) usbnet_resume(intf); + + if (ret) + schedule_delayed_work(&pdata->carrier_check, + CARRIER_CHECK_DELAY); + return ret; } -- cgit v1.2.3-58-ga151 From 284fb78ed7572117846f8e1d1d8e3dbfd16880c2 Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Fri, 2 Nov 2018 19:23:41 -0700 Subject: net: dsa: microchip: initialize mutex before use Initialize mutex before use. Avoid kernel complaint when CONFIG_DEBUG_LOCK_ALLOC is enabled. Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Tristram Ha Reviewed-by: Pavel Machek Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 54e0ca6ed730..86b6464b4525 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1117,11 +1117,6 @@ static int ksz_switch_init(struct ksz_device *dev) { int i; - mutex_init(&dev->reg_mutex); - mutex_init(&dev->stats_mutex); - mutex_init(&dev->alu_mutex); - mutex_init(&dev->vlan_mutex); - dev->ds->ops = &ksz_switch_ops; for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) { @@ -1206,6 +1201,11 @@ int ksz_switch_register(struct ksz_device *dev) if (dev->pdata) dev->chip_id = dev->pdata->chip_id; + mutex_init(&dev->reg_mutex); + mutex_init(&dev->stats_mutex); + mutex_init(&dev->alu_mutex); + mutex_init(&dev->vlan_mutex); + if (ksz_switch_detect(dev)) return -EINVAL; -- cgit v1.2.3-58-ga151 From 09e805d2570a3a94f13dd9c9ad2bcab23da76e09 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Thu, 1 Nov 2018 15:55:37 -0700 Subject: net: bcmgenet: protect stop from timeout A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcmgenet_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcmgenet_netif_stop. There are currently only two users of the bcmgenet_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcmgenet_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcmgenet_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcmgenet_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcmgenet_netif_start so it is moved into the driver open service. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 20c1681bb1af..2d6f090bf644 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2855,7 +2855,6 @@ static void bcmgenet_netif_start(struct net_device *dev) umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, true); - netif_tx_start_all_queues(dev); bcmgenet_enable_tx_napi(priv); /* Monitor link interrupts now */ @@ -2937,6 +2936,8 @@ static int bcmgenet_open(struct net_device *dev) bcmgenet_netif_start(dev); + netif_tx_start_all_queues(dev); + return 0; err_irq1: @@ -2958,7 +2959,7 @@ static void bcmgenet_netif_stop(struct net_device *dev) struct bcmgenet_priv *priv = netdev_priv(dev); bcmgenet_disable_tx_napi(priv); - netif_tx_stop_all_queues(dev); + netif_tx_disable(dev); /* Disable MAC receive */ umac_enable_set(priv, CMD_RX_EN, false); @@ -3620,13 +3621,13 @@ static int bcmgenet_suspend(struct device *d) if (!netif_running(dev)) return 0; + netif_device_detach(dev); + bcmgenet_netif_stop(dev); if (!device_may_wakeup(d)) phy_suspend(dev->phydev); - netif_device_detach(dev); - /* Prepare the device for Wake-on-LAN and switch to the slow clock */ if (device_may_wakeup(d) && priv->wolopts) { ret = bcmgenet_power_down(priv, GENET_POWER_WOL_MAGIC); @@ -3700,8 +3701,6 @@ static int bcmgenet_resume(struct device *d) /* Always enable ring 16 - descriptor ring */ bcmgenet_enable_dma(priv, dma_ctrl); - netif_device_attach(dev); - if (!device_may_wakeup(d)) phy_resume(dev->phydev); @@ -3710,6 +3709,8 @@ static int bcmgenet_resume(struct device *d) bcmgenet_netif_start(dev); + netif_device_attach(dev); + return 0; out_clk_disable: -- cgit v1.2.3-58-ga151 From 7cb6a2a2c72c1ed8f42fb01f1a661281b568dead Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 1 Nov 2018 15:55:38 -0700 Subject: net: systemport: Protect stop from timeout A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcm_sysport_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcm_sysport_netif_stop. There are currently only two users of the bcm_sysport_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcm_sysport_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcm_sysport_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcm_sysport_netif_start so it is moved into the driver open service. Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support") Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 4122553e224b..0e2d99c737e3 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1902,9 +1902,6 @@ static void bcm_sysport_netif_start(struct net_device *dev) intrl2_1_mask_clear(priv, 0xffffffff); else intrl2_0_mask_clear(priv, INTRL2_0_TDMA_MBDONE_MASK); - - /* Last call before we start the real business */ - netif_tx_start_all_queues(dev); } static void rbuf_init(struct bcm_sysport_priv *priv) @@ -2048,6 +2045,8 @@ static int bcm_sysport_open(struct net_device *dev) bcm_sysport_netif_start(dev); + netif_tx_start_all_queues(dev); + return 0; out_clear_rx_int: @@ -2071,7 +2070,7 @@ static void bcm_sysport_netif_stop(struct net_device *dev) struct bcm_sysport_priv *priv = netdev_priv(dev); /* stop all software from updating hardware */ - netif_tx_stop_all_queues(dev); + netif_tx_disable(dev); napi_disable(&priv->napi); cancel_work_sync(&priv->dim.dim.work); phy_stop(dev->phydev); @@ -2658,12 +2657,12 @@ static int __maybe_unused bcm_sysport_suspend(struct device *d) if (!netif_running(dev)) return 0; + netif_device_detach(dev); + bcm_sysport_netif_stop(dev); phy_suspend(dev->phydev); - netif_device_detach(dev); - /* Disable UniMAC RX */ umac_enable_set(priv, CMD_RX_EN, 0); @@ -2746,8 +2745,6 @@ static int __maybe_unused bcm_sysport_resume(struct device *d) goto out_free_rx_ring; } - netif_device_attach(dev); - /* RX pipe enable */ topctrl_writel(priv, 0, RX_FLUSH_CNTL); @@ -2788,6 +2785,8 @@ static int __maybe_unused bcm_sysport_resume(struct device *d) bcm_sysport_netif_start(dev); + netif_device_attach(dev); + return 0; out_free_rx_ring: -- cgit v1.2.3-58-ga151 From e19e5be8b4cafa8b3f8b0cd1b1dfe20fa0145b83 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:08 +0100 Subject: s390/qeth: sanitize strings in debug messages As Documentation/s390/s390dbf.txt states quite clearly, using any pointer in sprinf-formatted s390dbf debug entries is dangerous. The pointers are dereferenced whenever the trace file is read from. So if the referenced data has a shorter life-time than the trace file, any read operation can result in a use-after-free. So rip out all hazardous use of indirect data, and replace any usage of dev_name() and such by the Bus ID number. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 15 ++++- drivers/s390/net/qeth_core_main.c | 127 +++++++++++++++++--------------------- drivers/s390/net/qeth_l2_main.c | 24 +++---- drivers/s390/net/qeth_l3_main.c | 104 +++++++++++-------------------- 4 files changed, 119 insertions(+), 151 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 6843bc7ee9f2..884ba9dfb341 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -87,6 +87,18 @@ struct qeth_dbf_info { #define SENSE_RESETTING_EVENT_BYTE 1 #define SENSE_RESETTING_EVENT_FLAG 0x80 +static inline u32 qeth_get_device_id(struct ccw_device *cdev) +{ + struct ccw_dev_id dev_id; + u32 id; + + ccw_device_get_id(cdev, &dev_id); + id = dev_id.devno; + id |= (u32) (dev_id.ssid << 16); + + return id; +} + /* * Common IO related definitions */ @@ -97,7 +109,8 @@ struct qeth_dbf_info { #define CARD_RDEV_ID(card) dev_name(&card->read.ccwdev->dev) #define CARD_WDEV_ID(card) dev_name(&card->write.ccwdev->dev) #define CARD_DDEV_ID(card) dev_name(&card->data.ccwdev->dev) -#define CHANNEL_ID(channel) dev_name(&channel->ccwdev->dev) +#define CCW_DEVID(cdev) (qeth_get_device_id(cdev)) +#define CARD_DEVID(card) (CCW_DEVID(CARD_RDEV(card))) /** * card stuff diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3274f13aad57..639ac0aca1e9 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -554,8 +554,8 @@ static int __qeth_issue_next_read(struct qeth_card *card) if (!iob) { dev_warn(&card->gdev->dev, "The qeth device driver " "failed to recover an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s issue_next_read failed: no iob " - "available\n", dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(2, "issue_next_read on device %x failed: no iob available\n", + CARD_DEVID(card)); return -ENOMEM; } qeth_setup_ccw(channel->ccw, CCW_CMD_READ, QETH_BUFSIZE, iob->data); @@ -563,8 +563,8 @@ static int __qeth_issue_next_read(struct qeth_card *card) rc = ccw_device_start(channel->ccwdev, channel->ccw, (addr_t) iob, 0, 0); if (rc) { - QETH_DBF_MESSAGE(2, "%s error in starting next read ccw! " - "rc=%i\n", dev_name(&card->gdev->dev), rc); + QETH_DBF_MESSAGE(2, "error %i on device %x when starting next read ccw!\n", + rc, CARD_DEVID(card)); atomic_set(&channel->irq_pending, 0); card->read_or_write_problem = 1; qeth_schedule_recovery(card); @@ -613,16 +613,14 @@ static void qeth_issue_ipa_msg(struct qeth_ipa_cmd *cmd, int rc, const char *ipa_name; int com = cmd->hdr.command; ipa_name = qeth_get_ipa_cmd_name(com); + if (rc) - QETH_DBF_MESSAGE(2, "IPA: %s(x%X) for %s/%s returned " - "x%X \"%s\"\n", - ipa_name, com, dev_name(&card->gdev->dev), - QETH_CARD_IFNAME(card), rc, - qeth_get_ipa_msg(rc)); + QETH_DBF_MESSAGE(2, "IPA: %s(%#x) for device %x returned %#x \"%s\"\n", + ipa_name, com, CARD_DEVID(card), rc, + qeth_get_ipa_msg(rc)); else - QETH_DBF_MESSAGE(5, "IPA: %s(x%X) for %s/%s succeeded\n", - ipa_name, com, dev_name(&card->gdev->dev), - QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(5, "IPA: %s(%#x) for device %x succeeded\n", + ipa_name, com, CARD_DEVID(card)); } static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card, @@ -711,7 +709,7 @@ static int qeth_check_idx_response(struct qeth_card *card, QETH_DBF_HEX(CTRL, 2, buffer, QETH_DBF_CTRL_LEN); if ((buffer[2] & 0xc0) == 0xc0) { - QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#02x\n", + QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#04x\n", buffer[4]); QETH_CARD_TEXT(card, 2, "ckidxres"); QETH_CARD_TEXT(card, 2, " idxterm"); @@ -972,8 +970,8 @@ static int qeth_get_problem(struct qeth_card *card, struct ccw_device *cdev, QETH_CARD_TEXT(card, 2, "CGENCHK"); dev_warn(&cdev->dev, "The qeth device driver " "failed to recover an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s check on device dstat=x%x, cstat=x%x\n", - dev_name(&cdev->dev), dstat, cstat); + QETH_DBF_MESSAGE(2, "check on channel %x with dstat=%#x, cstat=%#x\n", + CCW_DEVID(cdev), dstat, cstat); print_hex_dump(KERN_WARNING, "qeth: irb ", DUMP_PREFIX_OFFSET, 16, 1, irb, 64, 1); return 1; @@ -1013,8 +1011,8 @@ static long qeth_check_irb_error(struct qeth_card *card, switch (PTR_ERR(irb)) { case -EIO: - QETH_DBF_MESSAGE(2, "%s i/o-error on device\n", - dev_name(&cdev->dev)); + QETH_DBF_MESSAGE(2, "i/o-error on channel %x\n", + CCW_DEVID(cdev)); QETH_CARD_TEXT(card, 2, "ckirberr"); QETH_CARD_TEXT_(card, 2, " rc%d", -EIO); break; @@ -1031,8 +1029,8 @@ static long qeth_check_irb_error(struct qeth_card *card, } break; default: - QETH_DBF_MESSAGE(2, "%s unknown error %ld on device\n", - dev_name(&cdev->dev), PTR_ERR(irb)); + QETH_DBF_MESSAGE(2, "unknown error %ld on channel %x\n", + PTR_ERR(irb), CCW_DEVID(cdev)); QETH_CARD_TEXT(card, 2, "ckirberr"); QETH_CARD_TEXT(card, 2, " rc???"); } @@ -1114,9 +1112,9 @@ static void qeth_irq(struct ccw_device *cdev, unsigned long intparm, dev_warn(&channel->ccwdev->dev, "The qeth device driver failed to recover " "an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s sense data available. cstat " - "0x%X dstat 0x%X\n", - dev_name(&channel->ccwdev->dev), cstat, dstat); + QETH_DBF_MESSAGE(2, "sense data available on channel %x: cstat %#X dstat %#X\n", + CCW_DEVID(channel->ccwdev), cstat, + dstat); print_hex_dump(KERN_WARNING, "qeth: irb ", DUMP_PREFIX_OFFSET, 16, 1, irb, 32, 1); print_hex_dump(KERN_WARNING, "qeth: sense data ", @@ -1890,8 +1888,8 @@ static int qeth_idx_activate_channel(struct qeth_card *card, if (channel->state != CH_STATE_ACTIVATING) { dev_warn(&channel->ccwdev->dev, "The qeth device driver" " failed to recover an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s IDX activate timed out\n", - dev_name(&channel->ccwdev->dev)); + QETH_DBF_MESSAGE(2, "IDX activate timed out on channel %x\n", + CCW_DEVID(channel->ccwdev)); QETH_DBF_TEXT_(SETUP, 2, "2err%d", -ETIME); return -ETIME; } @@ -1926,17 +1924,15 @@ static void qeth_idx_write_cb(struct qeth_card *card, "The adapter is used exclusively by another " "host\n"); else - QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on write channel:" - " negative reply\n", - dev_name(&channel->ccwdev->dev)); + QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: negative reply\n", + CCW_DEVID(channel->ccwdev)); goto out; } memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2); if ((temp & ~0x0100) != qeth_peer_func_level(card->info.func_level)) { - QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on write channel: " - "function level mismatch (sent: 0x%x, received: " - "0x%x)\n", dev_name(&channel->ccwdev->dev), - card->info.func_level, temp); + QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: function level mismatch (sent: %#x, received: %#x)\n", + CCW_DEVID(channel->ccwdev), + card->info.func_level, temp); goto out; } channel->state = CH_STATE_UP; @@ -1973,9 +1969,8 @@ static void qeth_idx_read_cb(struct qeth_card *card, "insufficient authorization\n"); break; default: - QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on read channel:" - " negative reply\n", - dev_name(&channel->ccwdev->dev)); + QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: negative reply\n", + CCW_DEVID(channel->ccwdev)); } QETH_CARD_TEXT_(card, 2, "idxread%c", QETH_IDX_ACT_CAUSE_CODE(iob->data)); @@ -1984,10 +1979,9 @@ static void qeth_idx_read_cb(struct qeth_card *card, memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2); if (temp != qeth_peer_func_level(card->info.func_level)) { - QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on read channel: function " - "level mismatch (sent: 0x%x, received: 0x%x)\n", - dev_name(&channel->ccwdev->dev), - card->info.func_level, temp); + QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: function level mismatch (sent: %#x, received: %#x)\n", + CCW_DEVID(channel->ccwdev), + card->info.func_level, temp); goto out; } memcpy(&card->token.issuer_rm_r, @@ -2096,9 +2090,8 @@ int qeth_send_control_data(struct qeth_card *card, int len, (addr_t) iob, 0, 0, event_timeout); spin_unlock_irq(get_ccwdev_lock(channel->ccwdev)); if (rc) { - QETH_DBF_MESSAGE(2, "%s qeth_send_control_data: " - "ccw_device_start rc = %i\n", - dev_name(&channel->ccwdev->dev), rc); + QETH_DBF_MESSAGE(2, "qeth_send_control_data on device %x: ccw_device_start rc = %i\n", + CARD_DEVID(card), rc); QETH_CARD_TEXT_(card, 2, " err%d", rc); spin_lock_irq(&card->lock); list_del_init(&reply->list); @@ -2853,8 +2846,8 @@ struct qeth_cmd_buffer *qeth_get_ipacmd_buffer(struct qeth_card *card, } else { dev_warn(&card->gdev->dev, "The qeth driver ran out of channel command buffers\n"); - QETH_DBF_MESSAGE(1, "%s The qeth driver ran out of channel command buffers", - dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(1, "device %x ran out of channel command buffers", + CARD_DEVID(card)); } return iob; @@ -2989,10 +2982,9 @@ static int qeth_query_ipassists_cb(struct qeth_card *card, return 0; default: if (cmd->hdr.return_code) { - QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled " - "rc=%d\n", - dev_name(&card->gdev->dev), - cmd->hdr.return_code); + QETH_DBF_MESSAGE(1, "IPA_CMD_QIPASSIST on device %x: Unhandled rc=%#x\n", + CARD_DEVID(card), + cmd->hdr.return_code); return 0; } } @@ -3004,8 +2996,8 @@ static int qeth_query_ipassists_cb(struct qeth_card *card, card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; } else - QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected" - "\n", dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(1, "IPA_CMD_QIPASSIST on device %x: Flawed LIC detected\n", + CARD_DEVID(card)); return 0; } @@ -4297,10 +4289,9 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, cmd->data.setadapterparms.hdr.return_code); if (cmd->data.setadapterparms.hdr.return_code != SET_ACCESS_CTRL_RC_SUCCESS) - QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%s,%d)==%d\n", - card->gdev->dev.kobj.name, - access_ctrl_req->subcmd_code, - cmd->data.setadapterparms.hdr.return_code); + QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%#x) on device %x: %#x\n", + access_ctrl_req->subcmd_code, CARD_DEVID(card), + cmd->data.setadapterparms.hdr.return_code); switch (cmd->data.setadapterparms.hdr.return_code) { case SET_ACCESS_CTRL_RC_SUCCESS: if (card->options.isolation == ISOLATION_MODE_NONE) { @@ -4312,14 +4303,14 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, } break; case SET_ACCESS_CTRL_RC_ALREADY_NOT_ISOLATED: - QETH_DBF_MESSAGE(2, "%s QDIO data connection isolation already " - "deactivated\n", dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(2, "QDIO data connection isolation on device %x already deactivated\n", + CARD_DEVID(card)); if (fallback) card->options.isolation = card->options.prev_isolation; break; case SET_ACCESS_CTRL_RC_ALREADY_ISOLATED: - QETH_DBF_MESSAGE(2, "%s QDIO data connection isolation already" - " activated\n", dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(2, "QDIO data connection isolation on device %x already activated\n", + CARD_DEVID(card)); if (fallback) card->options.isolation = card->options.prev_isolation; break; @@ -4405,10 +4396,8 @@ int qeth_set_access_ctrl_online(struct qeth_card *card, int fallback) rc = qeth_setadpparms_set_access_ctrl(card, card->options.isolation, fallback); if (rc) { - QETH_DBF_MESSAGE(3, - "IPA(SET_ACCESS_CTRL,%s,%d) sent failed\n", - card->gdev->dev.kobj.name, - rc); + QETH_DBF_MESSAGE(3, "IPA(SET_ACCESS_CTRL(%d) on device %x: sent failed\n", + rc, CARD_DEVID(card)); rc = -EOPNOTSUPP; } } else if (card->options.isolation != ISOLATION_MODE_NONE) { @@ -4634,8 +4623,8 @@ static int qeth_snmp_command(struct qeth_card *card, char __user *udata) rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len, qeth_snmp_command_cb, (void *)&qinfo); if (rc) - QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n", - QETH_CARD_IFNAME(card), rc); + QETH_DBF_MESSAGE(2, "SNMP command failed on device %x: (%#x)\n", + CARD_DEVID(card), rc); else { if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) rc = -EFAULT; @@ -4869,8 +4858,8 @@ static void qeth_determine_capabilities(struct qeth_card *card) rc = qeth_read_conf_data(card, (void **) &prcd, &length); if (rc) { - QETH_DBF_MESSAGE(2, "%s qeth_read_conf_data returned %i\n", - dev_name(&card->gdev->dev), rc); + QETH_DBF_MESSAGE(2, "qeth_read_conf_data on device %x returned %i\n", + CARD_DEVID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc); goto out_offline; } @@ -5096,8 +5085,8 @@ int qeth_core_hardsetup_card(struct qeth_card *card) qeth_update_from_chp_desc(card); retry: if (retries < 3) - QETH_DBF_MESSAGE(2, "%s Retrying to do IDX activates.\n", - dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(2, "Retrying to do IDX activates on device %x.\n", + CARD_DEVID(card)); rc = qeth_qdio_clear_card(card, card->info.type != QETH_CARD_TYPE_IQD); ccw_device_set_offline(CARD_DDEV(card)); ccw_device_set_offline(CARD_WDEV(card)); @@ -5201,8 +5190,8 @@ retriable: out: dev_warn(&card->gdev->dev, "The qeth device driver failed to recover " "an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s Initialization in hardsetup failed! rc=%d\n", - dev_name(&card->gdev->dev), rc); + QETH_DBF_MESSAGE(2, "Initialization for device %x failed in hardsetup! rc=%d\n", + CARD_DEVID(card), rc); return rc; } EXPORT_SYMBOL_GPL(qeth_core_hardsetup_card); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 23aaf373f631..5b67fd1f2b77 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -146,11 +146,11 @@ static int qeth_l2_write_mac(struct qeth_card *card, u8 *mac) QETH_CARD_TEXT(card, 2, "L2Wmac"); rc = qeth_l2_send_setdelmac(card, mac, cmd); if (rc == -EEXIST) - QETH_DBF_MESSAGE(2, "MAC %pM already registered on %s\n", - mac, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "MAC already registered on device %x\n", + CARD_DEVID(card)); else if (rc) - QETH_DBF_MESSAGE(2, "Failed to register MAC %pM on %s: %d\n", - mac, QETH_CARD_IFNAME(card), rc); + QETH_DBF_MESSAGE(2, "Failed to register MAC on device %x: %d\n", + CARD_DEVID(card), rc); return rc; } @@ -163,8 +163,8 @@ static int qeth_l2_remove_mac(struct qeth_card *card, u8 *mac) QETH_CARD_TEXT(card, 2, "L2Rmac"); rc = qeth_l2_send_setdelmac(card, mac, cmd); if (rc) - QETH_DBF_MESSAGE(2, "Failed to delete MAC %pM on %s: %d\n", - mac, QETH_CARD_IFNAME(card), rc); + QETH_DBF_MESSAGE(2, "Failed to delete MAC on device %u: %d\n", + CARD_DEVID(card), rc); return rc; } @@ -260,9 +260,9 @@ static int qeth_l2_send_setdelvlan_cb(struct qeth_card *card, QETH_CARD_TEXT(card, 2, "L2sdvcb"); if (cmd->hdr.return_code) { - QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x.\n", + QETH_DBF_MESSAGE(2, "Error in processing VLAN %u on device %x: %#x.\n", cmd->data.setdelvlan.vlan_id, - QETH_CARD_IFNAME(card), cmd->hdr.return_code); + CARD_DEVID(card), cmd->hdr.return_code); QETH_CARD_TEXT_(card, 2, "L2VL%4x", cmd->hdr.command); QETH_CARD_TEXT_(card, 2, "err%d", cmd->hdr.return_code); } @@ -455,8 +455,8 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) rc = qeth_vm_request_mac(card); if (!rc) goto out; - QETH_DBF_MESSAGE(2, "z/VM MAC Service failed on device %s: x%x\n", - CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "z/VM MAC Service failed on device %x: %#x\n", + CARD_DEVID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "err%04x", rc); /* fall back to alternative mechanism: */ } @@ -468,8 +468,8 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) rc = qeth_setadpparms_change_macaddr(card); if (!rc) goto out; - QETH_DBF_MESSAGE(2, "READ_MAC Assist failed on device %s: x%x\n", - CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "READ_MAC Assist failed on device %x: %#x\n", + CARD_DEVID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "1err%04x", rc); /* fall back once more: */ } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 0b161cc1fd2e..ffa2aa1dd4c5 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -494,9 +494,8 @@ int qeth_l3_setrouting_v4(struct qeth_card *card) QETH_PROT_IPV4); if (rc) { card->options.route4.type = NO_ROUTER; - QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" - " on %s. Type set to 'no router'.\n", rc, - QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (%#06x) while setting routing type on device %x. Type set to 'no router'.\n", + rc, CARD_DEVID(card)); } return rc; } @@ -518,9 +517,8 @@ int qeth_l3_setrouting_v6(struct qeth_card *card) QETH_PROT_IPV6); if (rc) { card->options.route6.type = NO_ROUTER; - QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" - " on %s. Type set to 'no router'.\n", rc, - QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (%#06x) while setting routing type on device %x. Type set to 'no router'.\n", + rc, CARD_DEVID(card)); } return rc; } @@ -1070,8 +1068,8 @@ qeth_diags_trace_cb(struct qeth_card *card, struct qeth_reply *reply, } break; default: - QETH_DBF_MESSAGE(2, "Unknown sniffer action (0x%04x) on %s\n", - cmd->data.diagass.action, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Unknown sniffer action (%#06x) on device %x\n", + cmd->data.diagass.action, CARD_DEVID(card)); } return 0; @@ -1517,32 +1515,25 @@ static void qeth_l3_set_rx_mode(struct net_device *dev) qeth_l3_handle_promisc_mode(card); } -static const char *qeth_l3_arp_get_error_cause(int *rc) +static int qeth_l3_arp_makerc(int rc) { - switch (*rc) { - case QETH_IPA_ARP_RC_FAILED: - *rc = -EIO; - return "operation failed"; + switch (rc) { + case IPA_RC_SUCCESS: + return 0; case QETH_IPA_ARP_RC_NOTSUPP: - *rc = -EOPNOTSUPP; - return "operation not supported"; - case QETH_IPA_ARP_RC_OUT_OF_RANGE: - *rc = -EINVAL; - return "argument out of range"; case QETH_IPA_ARP_RC_Q_NOTSUPP: - *rc = -EOPNOTSUPP; - return "query operation not supported"; + return -EOPNOTSUPP; + case QETH_IPA_ARP_RC_OUT_OF_RANGE: + return -EINVAL; case QETH_IPA_ARP_RC_Q_NO_DATA: - *rc = -ENOENT; - return "no query data available"; + return -ENOENT; default: - return "unknown error"; + return -EIO; } } static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) { - int tmp; int rc; QETH_CARD_TEXT(card, 3, "arpstnoe"); @@ -1560,13 +1551,10 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) rc = qeth_send_simple_setassparms(card, IPA_ARP_PROCESSING, IPA_CMD_ASS_ARP_SET_NO_ENTRIES, no_entries); - if (rc) { - tmp = rc; - QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on " - "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static __u32 get_arp_entry_size(struct qeth_card *card, @@ -1716,7 +1704,6 @@ static int qeth_l3_query_arp_cache_info(struct qeth_card *card, { struct qeth_cmd_buffer *iob; struct qeth_ipa_cmd *cmd; - int tmp; int rc; QETH_CARD_TEXT_(card, 3, "qarpipv%i", prot); @@ -1735,15 +1722,10 @@ static int qeth_l3_query_arp_cache_info(struct qeth_card *card, rc = qeth_l3_send_ipa_arp_cmd(card, iob, QETH_SETASS_BASE_LEN+QETH_ARP_CMD_LEN, qeth_l3_arp_query_cb, (void *)qinfo); - if (rc) { - tmp = rc; - QETH_DBF_MESSAGE(2, - "Error while querying ARP cache on %s: %s " - "(0x%x/%d)\n", QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Error while querying ARP cache on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) @@ -1797,8 +1779,6 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, struct qeth_arp_cache_entry *entry) { struct qeth_cmd_buffer *iob; - char buf[16]; - int tmp; int rc; QETH_CARD_TEXT(card, 3, "arpadent"); @@ -1824,14 +1804,10 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, sizeof(struct qeth_arp_cache_entry), (unsigned long) entry, qeth_setassparms_cb, NULL); - if (rc) { - tmp = rc; - qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s " - "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Could not add ARP entry on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static int qeth_l3_arp_remove_entry(struct qeth_card *card, @@ -1839,7 +1815,6 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, { struct qeth_cmd_buffer *iob; char buf[16] = {0, }; - int tmp; int rc; QETH_CARD_TEXT(card, 3, "arprment"); @@ -1864,21 +1839,15 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, rc = qeth_send_setassparms(card, iob, 12, (unsigned long)buf, qeth_setassparms_cb, NULL); - if (rc) { - tmp = rc; - memset(buf, 0, 16); - qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s" - " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Could not delete ARP entry on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static int qeth_l3_arp_flush_cache(struct qeth_card *card) { int rc; - int tmp; QETH_CARD_TEXT(card, 3, "arpflush"); @@ -1894,13 +1863,10 @@ static int qeth_l3_arp_flush_cache(struct qeth_card *card) } rc = qeth_send_simple_setassparms(card, IPA_ARP_PROCESSING, IPA_CMD_ASS_ARP_FLUSH_CACHE, 0); - if (rc) { - tmp = rc; - QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s " - "(0x%x/%d)\n", QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Could not flush ARP cache on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -- cgit v1.2.3-58-ga151 From bd74a7f9cc033cf4d405788f80292268987dc0c5 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:09 +0100 Subject: s390/qeth: fix HiperSockets sniffer Sniffing mode for L3 HiperSockets requires that no IP addresses are registered with the HW. The preferred way to achieve this is for userspace to delete all the IPs on the interface. But qeth is expected to also tolerate a configuration where that is not the case, by skipping the IP registration when in sniffer mode. Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") reworked the IP registration logic in the L3 subdriver, this no longer works. When the qeth device is set online, qeth_l3_recover_ip() now unconditionally registers all unicast addresses from our internal IP table. While we could fix this particular problem by skipping qeth_l3_recover_ip() on a sniffer device, the more future-proof change is to skip the IP address registration at the lowest level. This way we a) catch any future code path that attempts to register an IP address without considering the sniffer scenario, and b) continue to build up our internal IP table, so that if sniffer mode is switched off later we can operate just like normal. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index ffa2aa1dd4c5..968e344a240b 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -278,9 +278,6 @@ static void qeth_l3_clear_ip_htable(struct qeth_card *card, int recover) QETH_CARD_TEXT(card, 4, "clearip"); - if (recover && card->options.sniffer) - return; - spin_lock_bh(&card->ip_lock); hash_for_each_safe(card->ip_htable, i, tmp, addr, hnode) { @@ -661,6 +658,8 @@ static int qeth_l3_register_addr_entry(struct qeth_card *card, int rc = 0; int cnt = 3; + if (card->options.sniffer) + return 0; if (addr->proto == QETH_PROT_IPV4) { QETH_CARD_TEXT(card, 2, "setaddr4"); @@ -695,6 +694,9 @@ static int qeth_l3_deregister_addr_entry(struct qeth_card *card, { int rc = 0; + if (card->options.sniffer) + return 0; + if (addr->proto == QETH_PROT_IPV4) { QETH_CARD_TEXT(card, 2, "deladdr4"); QETH_CARD_HEX(card, 3, &addr->u.a4.addr, sizeof(int)); -- cgit v1.2.3-58-ga151 From 30356d08159d7899438e94503ae322a8b881e205 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:10 +0100 Subject: s390/qeth: unregister netdevice only when registered qeth only registers its netdevice when the qeth device is first set online. Thus a device that has never been set online will trigger a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when removed. Fix this by protecting the unregister step, just like we already protect against repeated registering of the netdevice. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Reported-by: Karsten Graul Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 5 +++++ drivers/s390/net/qeth_l2_main.c | 5 +++-- drivers/s390/net/qeth_l3_main.c | 5 +++-- 3 files changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 884ba9dfb341..b3a0b8838d2f 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -843,6 +843,11 @@ struct qeth_trap_id { /*some helper functions*/ #define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "") +static inline bool qeth_netdev_is_registered(struct net_device *dev) +{ + return dev->netdev_ops != NULL; +} + static inline void qeth_scrub_qdio_buffer(struct qdio_buffer *buf, unsigned int elements) { diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 5b67fd1f2b77..2b978eba7e30 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -826,7 +826,8 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev) if (cgdev->state == CCWGROUP_ONLINE) qeth_l2_set_offline(cgdev); - unregister_netdev(card->dev); + if (qeth_netdev_is_registered(card->dev)) + unregister_netdev(card->dev); } static const struct ethtool_ops qeth_l2_ethtool_ops = { @@ -866,7 +867,7 @@ static int qeth_l2_setup_netdev(struct qeth_card *card) { int rc; - if (card->dev->netdev_ops) + if (qeth_netdev_is_registered(card->dev)) return 0; card->dev->priv_flags |= IFF_UNICAST_FLT; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 968e344a240b..a719c5ec4171 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2356,7 +2356,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card) unsigned int headroom; int rc; - if (card->dev->netdev_ops) + if (qeth_netdev_is_registered(card->dev)) return 0; if (card->info.type == QETH_CARD_TYPE_OSD || @@ -2465,7 +2465,8 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev) if (cgdev->state == CCWGROUP_ONLINE) qeth_l3_set_offline(cgdev); - unregister_netdev(card->dev); + if (qeth_netdev_is_registered(card->dev)) + unregister_netdev(card->dev); qeth_l3_clear_ip_htable(card, 0); qeth_l3_clear_ipato_list(card); } -- cgit v1.2.3-58-ga151 From 9fae5c3b60396b8586881a0e7c028ae5bcaeaa3f Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:11 +0100 Subject: s390/qeth: fix initial operstate Setting the carrier 'on' for an unregistered netdevice doesn't update its operstate. Fix this by delaying the update until the netdevice has been registered. Fixes: 91cc98f51e3d ("s390/qeth: remove duplicated carrier state tracking") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 2 +- drivers/s390/net/qeth_core_main.c | 13 ++++++++++--- drivers/s390/net/qeth_l2_main.c | 10 +++++++--- drivers/s390/net/qeth_l3_main.c | 10 +++++++--- 4 files changed, 25 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index b3a0b8838d2f..90cb213b0d55 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -991,7 +991,7 @@ int qeth_wait_for_threads(struct qeth_card *, unsigned long); int qeth_do_run_thread(struct qeth_card *, unsigned long); void qeth_clear_thread_start_bit(struct qeth_card *, unsigned long); void qeth_clear_thread_running_bit(struct qeth_card *, unsigned long); -int qeth_core_hardsetup_card(struct qeth_card *); +int qeth_core_hardsetup_card(struct qeth_card *card, bool *carrier_ok); void qeth_print_status_message(struct qeth_card *); int qeth_init_qdio_queues(struct qeth_card *); int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 639ac0aca1e9..aed1a7961553 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5075,7 +5075,7 @@ static struct ccw_driver qeth_ccw_driver = { .remove = ccwgroup_remove_ccwdev, }; -int qeth_core_hardsetup_card(struct qeth_card *card) +int qeth_core_hardsetup_card(struct qeth_card *card, bool *carrier_ok) { int retries = 3; int rc; @@ -5150,13 +5150,20 @@ retriable: if (rc == IPA_RC_LAN_OFFLINE) { dev_warn(&card->gdev->dev, "The LAN is offline\n"); - netif_carrier_off(card->dev); + *carrier_ok = false; } else { rc = -ENODEV; goto out; } } else { - netif_carrier_on(card->dev); + *carrier_ok = true; + } + + if (qeth_netdev_is_registered(card->dev)) { + if (*carrier_ok) + netif_carrier_on(card->dev); + else + netif_carrier_off(card->dev); } card->options.ipa4.supported_funcs = 0; diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 2b978eba7e30..2914a1a69f83 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -863,7 +863,7 @@ static const struct net_device_ops qeth_l2_netdev_ops = { .ndo_set_features = qeth_set_features }; -static int qeth_l2_setup_netdev(struct qeth_card *card) +static int qeth_l2_setup_netdev(struct qeth_card *card, bool carrier_ok) { int rc; @@ -920,6 +920,9 @@ static int qeth_l2_setup_netdev(struct qeth_card *card) qeth_l2_request_initial_mac(card); netif_napi_add(card->dev, &card->napi, qeth_poll, QETH_NAPI_WEIGHT); rc = register_netdev(card->dev); + if (!rc && carrier_ok) + netif_carrier_on(card->dev); + if (rc) card->dev->netdev_ops = NULL; return rc; @@ -950,6 +953,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) struct qeth_card *card = dev_get_drvdata(&gdev->dev); int rc = 0; enum qeth_card_states recover_flag; + bool carrier_ok; mutex_lock(&card->discipline_mutex); mutex_lock(&card->conf_mutex); @@ -957,7 +961,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); recover_flag = card->state; - rc = qeth_core_hardsetup_card(card); + rc = qeth_core_hardsetup_card(card, &carrier_ok); if (rc) { QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); rc = -ENODEV; @@ -968,7 +972,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) dev_info(&card->gdev->dev, "The device represents a Bridge Capable Port\n"); - rc = qeth_l2_setup_netdev(card); + rc = qeth_l2_setup_netdev(card, carrier_ok); if (rc) goto out_remove; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index a719c5ec4171..b26f7d7a2ca0 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2351,7 +2351,7 @@ static const struct net_device_ops qeth_l3_osa_netdev_ops = { .ndo_neigh_setup = qeth_l3_neigh_setup, }; -static int qeth_l3_setup_netdev(struct qeth_card *card) +static int qeth_l3_setup_netdev(struct qeth_card *card, bool carrier_ok) { unsigned int headroom; int rc; @@ -2425,6 +2425,9 @@ static int qeth_l3_setup_netdev(struct qeth_card *card) netif_napi_add(card->dev, &card->napi, qeth_poll, QETH_NAPI_WEIGHT); rc = register_netdev(card->dev); + if (!rc && carrier_ok) + netif_carrier_on(card->dev); + out: if (rc) card->dev->netdev_ops = NULL; @@ -2476,6 +2479,7 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) struct qeth_card *card = dev_get_drvdata(&gdev->dev); int rc = 0; enum qeth_card_states recover_flag; + bool carrier_ok; mutex_lock(&card->discipline_mutex); mutex_lock(&card->conf_mutex); @@ -2483,14 +2487,14 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); recover_flag = card->state; - rc = qeth_core_hardsetup_card(card); + rc = qeth_core_hardsetup_card(card, &carrier_ok); if (rc) { QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); rc = -ENODEV; goto out_remove; } - rc = qeth_l3_setup_netdev(card); + rc = qeth_l3_setup_netdev(card, carrier_ok); if (rc) goto out_remove; -- cgit v1.2.3-58-ga151 From 125d7d30111738a5bdafacc1ed87cd3d7f32b4ea Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:12 +0100 Subject: s390/qeth: sanitize ARP requests The ARP_{ADD,REMOVE}_ENTRY cmd structs contain reserved fields. Introduce a common helper that doesn't raw-copy the user-provided data into the cmd, but only sets those fields that are strictly needed for the command. This also sets the correct command length for ARP_REMOVE_ENTRY. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 5 --- drivers/s390/net/qeth_core_main.c | 12 ++--- drivers/s390/net/qeth_core_mpc.h | 2 +- drivers/s390/net/qeth_l3_main.c | 94 +++++++++++---------------------------- 4 files changed, 34 insertions(+), 79 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 90cb213b0d55..04e294d1d16d 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -1046,11 +1046,6 @@ int qeth_configure_cq(struct qeth_card *, enum qeth_cq); int qeth_hw_trap(struct qeth_card *, enum qeth_diags_trap_action); void qeth_trace_features(struct qeth_card *); void qeth_close_dev(struct qeth_card *); -int qeth_send_setassparms(struct qeth_card *, struct qeth_cmd_buffer *, __u16, - long, - int (*reply_cb)(struct qeth_card *, - struct qeth_reply *, unsigned long), - void *); int qeth_setassparms_cb(struct qeth_card *, struct qeth_reply *, unsigned long); struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *, enum qeth_ipa_funcs, diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index aed1a7961553..82282b2092d8 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5477,11 +5477,12 @@ struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *card, } EXPORT_SYMBOL_GPL(qeth_get_setassparms_cmd); -int qeth_send_setassparms(struct qeth_card *card, - struct qeth_cmd_buffer *iob, __u16 len, long data, - int (*reply_cb)(struct qeth_card *, - struct qeth_reply *, unsigned long), - void *reply_param) +static int qeth_send_setassparms(struct qeth_card *card, + struct qeth_cmd_buffer *iob, u16 len, + long data, int (*reply_cb)(struct qeth_card *, + struct qeth_reply *, + unsigned long), + void *reply_param) { int rc; struct qeth_ipa_cmd *cmd; @@ -5497,7 +5498,6 @@ int qeth_send_setassparms(struct qeth_card *card, rc = qeth_send_ipa_cmd(card, iob, reply_cb, reply_param); return rc; } -EXPORT_SYMBOL_GPL(qeth_send_setassparms); int qeth_send_simple_setassparms_prot(struct qeth_card *card, enum qeth_ipa_funcs ipa_func, diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h index e85090467afe..80c036acf563 100644 --- a/drivers/s390/net/qeth_core_mpc.h +++ b/drivers/s390/net/qeth_core_mpc.h @@ -436,7 +436,7 @@ struct qeth_ipacmd_setassparms { __u32 flags_32bit; struct qeth_ipa_caps caps; struct qeth_checksum_cmd chksum; - struct qeth_arp_cache_entry add_arp_entry; + struct qeth_arp_cache_entry arp_entry; struct qeth_arp_query_data query_arp; struct qeth_tso_start_data tso; __u8 ip[16]; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index b26f7d7a2ca0..f08b745c2007 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -1777,13 +1777,18 @@ out: return rc; } -static int qeth_l3_arp_add_entry(struct qeth_card *card, - struct qeth_arp_cache_entry *entry) +static int qeth_l3_arp_modify_entry(struct qeth_card *card, + struct qeth_arp_cache_entry *entry, + enum qeth_arp_process_subcmds arp_cmd) { + struct qeth_arp_cache_entry *cmd_entry; struct qeth_cmd_buffer *iob; int rc; - QETH_CARD_TEXT(card, 3, "arpadent"); + if (arp_cmd == IPA_CMD_ASS_ARP_ADD_ENTRY) + QETH_CARD_TEXT(card, 3, "arpadd"); + else + QETH_CARD_TEXT(card, 3, "arpdel"); /* * currently GuestLAN only supports the ARP assist function @@ -1796,54 +1801,19 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, return -EOPNOTSUPP; } - iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_ADD_ENTRY, - sizeof(struct qeth_arp_cache_entry), - QETH_PROT_IPV4); + iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, arp_cmd, + sizeof(*cmd_entry), QETH_PROT_IPV4); if (!iob) return -ENOMEM; - rc = qeth_send_setassparms(card, iob, - sizeof(struct qeth_arp_cache_entry), - (unsigned long) entry, - qeth_setassparms_cb, NULL); - if (rc) - QETH_DBF_MESSAGE(2, "Could not add ARP entry on device %x: %#x\n", - CARD_DEVID(card), rc); - return qeth_l3_arp_makerc(rc); -} - -static int qeth_l3_arp_remove_entry(struct qeth_card *card, - struct qeth_arp_cache_entry *entry) -{ - struct qeth_cmd_buffer *iob; - char buf[16] = {0, }; - int rc; - QETH_CARD_TEXT(card, 3, "arprment"); - - /* - * currently GuestLAN only supports the ARP assist function - * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_REMOVE_ENTRY; - * thus we say EOPNOTSUPP for this ARP function - */ - if (card->info.guestlan) - return -EOPNOTSUPP; - if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - return -EOPNOTSUPP; - } - memcpy(buf, entry, 12); - iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_REMOVE_ENTRY, - 12, - QETH_PROT_IPV4); - if (!iob) - return -ENOMEM; - rc = qeth_send_setassparms(card, iob, - 12, (unsigned long)buf, - qeth_setassparms_cb, NULL); + cmd_entry = &__ipa_cmd(iob)->data.setassparms.data.arp_entry; + ether_addr_copy(cmd_entry->macaddr, entry->macaddr); + memcpy(cmd_entry->ipaddr, entry->ipaddr, 4); + rc = qeth_send_ipa_cmd(card, iob, qeth_setassparms_cb, NULL); if (rc) - QETH_DBF_MESSAGE(2, "Could not delete ARP entry on device %x: %#x\n", - CARD_DEVID(card), rc); + QETH_DBF_MESSAGE(2, "Could not modify (cmd: %#x) ARP entry on device %x: %#x\n", + arp_cmd, CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } @@ -1875,6 +1845,7 @@ static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct qeth_card *card = dev->ml_priv; struct qeth_arp_cache_entry arp_entry; + enum qeth_arp_process_subcmds arp_cmd; int rc = 0; switch (cmd) { @@ -1893,27 +1864,16 @@ static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) rc = qeth_l3_arp_query(card, rq->ifr_ifru.ifru_data); break; case SIOC_QETH_ARP_ADD_ENTRY: - if (!capable(CAP_NET_ADMIN)) { - rc = -EPERM; - break; - } - if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data, - sizeof(struct qeth_arp_cache_entry))) - rc = -EFAULT; - else - rc = qeth_l3_arp_add_entry(card, &arp_entry); - break; case SIOC_QETH_ARP_REMOVE_ENTRY: - if (!capable(CAP_NET_ADMIN)) { - rc = -EPERM; - break; - } - if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data, - sizeof(struct qeth_arp_cache_entry))) - rc = -EFAULT; - else - rc = qeth_l3_arp_remove_entry(card, &arp_entry); - break; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&arp_entry, rq->ifr_data, sizeof(arp_entry))) + return -EFAULT; + + arp_cmd = (cmd == SIOC_QETH_ARP_ADD_ENTRY) ? + IPA_CMD_ASS_ARP_ADD_ENTRY : + IPA_CMD_ASS_ARP_REMOVE_ENTRY; + return qeth_l3_arp_modify_entry(card, &arp_entry, arp_cmd); case SIOC_QETH_ARP_FLUSH_CACHE: if (!capable(CAP_NET_ADMIN)) { rc = -EPERM; -- cgit v1.2.3-58-ga151 From 54e049c227d9968ff6a7d80aae5fec27b54d39da Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:13 +0100 Subject: s390/qeth: report 25Gbit link speed This adds the various identifiers for 25Gbit cards, and wires them up into sysfs and ethtool. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 20 ++++++++++++++++++-- drivers/s390/net/qeth_core_mpc.h | 2 ++ 2 files changed, 20 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 82282b2092d8..4bce5ae65a55 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -167,6 +167,8 @@ const char *qeth_get_cardname_short(struct qeth_card *card) return "OSD_1000"; case QETH_LINK_TYPE_10GBIT_ETH: return "OSD_10GIG"; + case QETH_LINK_TYPE_25GBIT_ETH: + return "OSD_25GIG"; case QETH_LINK_TYPE_LANE_ETH100: return "OSD_FE_LANE"; case QETH_LINK_TYPE_LANE_TR: @@ -4432,7 +4434,8 @@ static int qeth_mdio_read(struct net_device *dev, int phy_id, int regnum) rc = BMCR_FULLDPLX; if ((card->info.link_type != QETH_LINK_TYPE_GBIT_ETH) && (card->info.link_type != QETH_LINK_TYPE_OSN) && - (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH)) + (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH) && + (card->info.link_type != QETH_LINK_TYPE_25GBIT_ETH)) rc |= BMCR_SPEED100; break; case MII_BMSR: /* Basic mode status register */ @@ -6166,8 +6169,14 @@ static void qeth_set_cmd_adv_sup(struct ethtool_link_ksettings *cmd, WARN_ON_ONCE(1); } - /* fallthrough from high to low, to select all legal speeds: */ + /* partially does fall through, to also select lower speeds */ switch (maxspeed) { + case SPEED_25000: + ethtool_link_ksettings_add_link_mode(cmd, supported, + 25000baseSR_Full); + ethtool_link_ksettings_add_link_mode(cmd, advertising, + 25000baseSR_Full); + break; case SPEED_10000: ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseT_Full); @@ -6250,6 +6259,10 @@ int qeth_core_ethtool_get_link_ksettings(struct net_device *netdev, cmd->base.speed = SPEED_10000; cmd->base.port = PORT_FIBRE; break; + case QETH_LINK_TYPE_25GBIT_ETH: + cmd->base.speed = SPEED_25000; + cmd->base.port = PORT_FIBRE; + break; default: cmd->base.speed = SPEED_10; cmd->base.port = PORT_TP; @@ -6316,6 +6329,9 @@ int qeth_core_ethtool_get_link_ksettings(struct net_device *netdev, case CARD_INFO_PORTS_10G: cmd->base.speed = SPEED_10000; break; + case CARD_INFO_PORTS_25G: + cmd->base.speed = SPEED_25000; + break; } return 0; diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h index 80c036acf563..3e54be201b27 100644 --- a/drivers/s390/net/qeth_core_mpc.h +++ b/drivers/s390/net/qeth_core_mpc.h @@ -90,6 +90,7 @@ enum qeth_link_types { QETH_LINK_TYPE_GBIT_ETH = 0x03, QETH_LINK_TYPE_OSN = 0x04, QETH_LINK_TYPE_10GBIT_ETH = 0x10, + QETH_LINK_TYPE_25GBIT_ETH = 0x12, QETH_LINK_TYPE_LANE_ETH100 = 0x81, QETH_LINK_TYPE_LANE_TR = 0x82, QETH_LINK_TYPE_LANE_ETH1000 = 0x83, @@ -347,6 +348,7 @@ enum qeth_card_info_port_speed { CARD_INFO_PORTS_100M = 0x00000006, CARD_INFO_PORTS_1G = 0x00000007, CARD_INFO_PORTS_10G = 0x00000008, + CARD_INFO_PORTS_25G = 0x0000000A, }; /* (SET)DELIP(M) IPA stuff ***************************************************/ -- cgit v1.2.3-58-ga151 From c29734443511aa3c53844e1941805fc761aa80ba Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 31 Oct 2018 08:39:14 -0700 Subject: net/mlx4_en: use __netdev_tx_sent_queue() doorbell only depends on xmit_more and netif_tx_queue_stopped() Using __netdev_tx_sent_queue() avoids messing with BQL stop flag, and is more generic. This patch increases performance on GSO workload by keeping doorbells to the minimum required. Signed-off-by: Eric Dumazet Cc: Tariq Toukan Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 1857ee0f0871..6f5153afcab4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -1006,7 +1006,6 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->packets++; } ring->bytes += tx_info->nr_bytes; - netdev_tx_sent_queue(ring->tx_queue, tx_info->nr_bytes); AVG_PERF_COUNTER(priv->pstats.tx_pktsz_avg, skb->len); if (tx_info->inl) @@ -1044,7 +1043,10 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) netif_tx_stop_queue(ring->tx_queue); ring->queue_stopped++; } - send_doorbell = !skb->xmit_more || netif_xmit_stopped(ring->tx_queue); + + send_doorbell = __netdev_tx_sent_queue(ring->tx_queue, + tx_info->nr_bytes, + skb->xmit_more); real_size = (real_size / 16) & 0x3f; -- cgit v1.2.3-58-ga151 From e8ccbb7d2f53c62e14b889faaa3f6f809b657278 Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Fri, 2 Nov 2018 17:47:48 +0800 Subject: net: hns3: Fix for out-of-bounds access when setting pfc back pressure The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index aa5cb9834d73..494e562fe8c7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -1168,14 +1168,14 @@ static int hclge_pfc_setup_hw(struct hclge_dev *hdev) */ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc) { - struct hclge_vport *vport = hdev->vport; - u32 i, k, qs_bitmap; - int ret; + int i; for (i = 0; i < HCLGE_BP_GRP_NUM; i++) { - qs_bitmap = 0; + u32 qs_bitmap = 0; + int k, ret; for (k = 0; k < hdev->num_alloc_vport; k++) { + struct hclge_vport *vport = &hdev->vport[k]; u16 qs_id = vport->qs_offset + tc; u8 grp, sub_grp; @@ -1185,8 +1185,6 @@ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc) HCLGE_BP_SUB_GRP_ID_S); if (i == grp) qs_bitmap |= (1 << sub_grp); - - vport++; } ret = hclge_tm_qs_bp_cfg(hdev, tc, i, qs_bitmap); -- cgit v1.2.3-58-ga151 From 92619210529a6b77b2cbedbadba3ff5eaa6e28ed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:36:24 +0100 Subject: qed: fix link config error handling gcc-8 notices that qed_mcp_get_transceiver_data() may fail to return a result to the caller: drivers/net/ethernet/qlogic/qed/qed_mcp.c: In function 'qed_mcp_trans_speed_mask': drivers/net/ethernet/qlogic/qed/qed_mcp.c:1955:2: error: 'transceiver_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] When an error is returned by qed_mcp_get_transceiver_data(), we should propagate that to the caller of qed_mcp_trans_speed_mask() rather than continuing with uninitialized data. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index f40f654398a0..a96364df4320 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1944,9 +1944,12 @@ int qed_mcp_trans_speed_mask(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, u32 *p_speed_mask) { u32 transceiver_type, transceiver_state; + int ret; - qed_mcp_get_transceiver_data(p_hwfn, p_ptt, &transceiver_state, - &transceiver_type); + ret = qed_mcp_get_transceiver_data(p_hwfn, p_ptt, &transceiver_state, + &transceiver_type); + if (ret) + return ret; if (qed_is_transceiver_ready(transceiver_state, transceiver_type) == false) -- cgit v1.2.3-58-ga151 From 96801552f846460fe9ac10f1b189602992f004e1 Mon Sep 17 00:00:00 2001 From: Shalom Toledo Date: Fri, 2 Nov 2018 19:49:15 +0000 Subject: mlxsw: spectrum: Fix IP2ME CPU policer configuration The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by: Shalom Toledo Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index a2df12b79f8e..9bec940330a4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -3568,7 +3568,6 @@ static int mlxsw_sp_cpu_policers_set(struct mlxsw_core *mlxsw_core) burst_size = 7; break; case MLXSW_REG_HTGT_TRAP_GROUP_SP_IP2ME: - is_bytes = true; rate = 4 * 1024; burst_size = 4; break; -- cgit v1.2.3-58-ga151 From 35b69a420bfb56b7b74cb635ea903db05e357bec Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Sun, 4 Nov 2018 03:48:54 +0000 Subject: clockevents/drivers/i8253: Add support for PIT shutdown quirk Add support for platforms where pit_shutdown() doesn't work because of a quirk in the PIT emulation. On these platforms setting the counter register to zero causes the PIT to start running again, negating the shutdown. Provide a global variable that controls whether the counter register is zero'ed, which platform specific code can override. Signed-off-by: Michael Kelley Signed-off-by: Thomas Gleixner Cc: "gregkh@linuxfoundation.org" Cc: "devel@linuxdriverproject.org" Cc: "daniel.lezcano@linaro.org" Cc: "virtualization@lists.linux-foundation.org" Cc: "jgross@suse.com" Cc: "akataria@vmware.com" Cc: "olaf@aepfle.de" Cc: "apw@canonical.com" Cc: vkuznets Cc: "jasowang@redhat.com" Cc: "marcelo.cerri@canonical.com" Cc: KY Srinivasan Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1541303219-11142-2-git-send-email-mikelley@microsoft.com --- drivers/clocksource/i8253.c | 14 ++++++++++++-- include/linux/i8253.h | 1 + 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c index 9c38895542f4..d4350bb10b83 100644 --- a/drivers/clocksource/i8253.c +++ b/drivers/clocksource/i8253.c @@ -20,6 +20,13 @@ DEFINE_RAW_SPINLOCK(i8253_lock); EXPORT_SYMBOL(i8253_lock); +/* + * Handle PIT quirk in pit_shutdown() where zeroing the counter register + * restarts the PIT, negating the shutdown. On platforms with the quirk, + * platform specific code can set this to false. + */ +bool i8253_clear_counter_on_shutdown __ro_after_init = true; + #ifdef CONFIG_CLKSRC_I8253 /* * Since the PIT overflows every tick, its not very useful @@ -109,8 +116,11 @@ static int pit_shutdown(struct clock_event_device *evt) raw_spin_lock(&i8253_lock); outb_p(0x30, PIT_MODE); - outb_p(0, PIT_CH0); - outb_p(0, PIT_CH0); + + if (i8253_clear_counter_on_shutdown) { + outb_p(0, PIT_CH0); + outb_p(0, PIT_CH0); + } raw_spin_unlock(&i8253_lock); return 0; diff --git a/include/linux/i8253.h b/include/linux/i8253.h index e6bb36a97519..8336b2f6f834 100644 --- a/include/linux/i8253.h +++ b/include/linux/i8253.h @@ -21,6 +21,7 @@ #define PIT_LATCH ((PIT_TICK_RATE + HZ/2) / HZ) extern raw_spinlock_t i8253_lock; +extern bool i8253_clear_counter_on_shutdown; extern struct clock_event_device i8253_clockevent; extern void clockevent_i8253_init(bool oneshot); -- cgit v1.2.3-58-ga151 From 74e3512731bd5c9673176425a76a7cc5efa8ddb6 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Wed, 24 Oct 2018 22:37:13 +0300 Subject: hwmon: (core) Fix double-free in __hwmon_device_register() Fix double-free that happens when thermal zone setup fails, see KASAN log below. ================================================================== BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: [] (dump_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x9c/0xb0) [] (dump_stack) from [] (print_address_description+0x68/0x250) [] (print_address_description) from [] (kasan_report_invalid_free+0x68/0x88) [] (kasan_report_invalid_free) from [] (__kasan_slab_free+0x1f4/0x200) [] (__kasan_slab_free) from [] (kasan_slab_free+0x14/0x18) [] (kasan_slab_free) from [] (kfree+0x90/0x294) [] (kfree) from [] (__hwmon_device_register+0x5dc/0xa7c) [] (__hwmon_device_register) from [] (hwmon_device_register_with_info+0xa0/0xa8) [] (hwmon_device_register_with_info) from [] (devm_hwmon_device_register_with_info+0x74/0xb4) [] (devm_hwmon_device_register_with_info) from [] (lm90_probe+0x414/0x578) [] (lm90_probe) from [] (i2c_device_probe+0x35c/0x384) [] (i2c_device_probe) from [] (really_probe+0x290/0x3e4) [] (really_probe) from [] (driver_probe_device+0x80/0x1c4) [] (driver_probe_device) from [] (__device_attach_driver+0x104/0x11c) [] (__device_attach_driver) from [] (bus_for_each_drv+0xa4/0xc8) [] (bus_for_each_drv) from [] (__device_attach+0xf0/0x15c) [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [] (device_initial_probe) from [] (bus_probe_device+0xdc/0xec) [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xd4) [] (deferred_probe_work_func) from [] (process_one_work+0x3dc/0x96c) [] (process_one_work) from [] (worker_thread+0x4ec/0x8bc) [] (worker_thread) from [] (kthread+0x230/0x240) [] (kthread) from [] (ret_from_fork+0x14/0x38) Exception stack(0xcf743fb0 to 0xcf743ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Allocated by task 132: kasan_kmalloc.part.1+0x58/0xf4 kasan_kmalloc+0x90/0xa4 kmem_cache_alloc_trace+0x90/0x2a0 __hwmon_device_register+0xbc/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Freed by task 132: __kasan_slab_free+0x12c/0x200 kasan_slab_free+0x14/0x18 kfree+0x90/0x294 hwmon_dev_release+0x1c/0x20 device_release+0x4c/0xe8 kobject_put+0xac/0x11c device_unregister+0x2c/0x30 __hwmon_device_register+0xa58/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Cc: # v4.15+ Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem") Signed-off-by: Dmitry Osipenko Signed-off-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index 975c95169884..84f61cec6319 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -649,8 +649,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, if (info[i]->config[j] & HWMON_T_INPUT) { err = hwmon_thermal_add_sensor(dev, hwdev, j); - if (err) - goto free_device; + if (err) { + device_unregister(hdev); + goto ida_remove; + } } } } @@ -658,8 +660,6 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, return hdev; -free_device: - device_unregister(hdev); free_hwmon: kfree(hwdev); ida_remove: -- cgit v1.2.3-58-ga151 From e3e61f01d755188cb6c2dcf5a244b9c0937c258e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 28 Oct 2018 18:16:51 +0100 Subject: hwmon: (ibmpowernv) Remove bogus __init annotations If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by: Geert Uytterhoeven Signed-off-by: Guenter Roeck --- drivers/hwmon/ibmpowernv.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c index 0ccca87f5271..293dd1c6c7b3 100644 --- a/drivers/hwmon/ibmpowernv.c +++ b/drivers/hwmon/ibmpowernv.c @@ -181,7 +181,7 @@ static ssize_t show_label(struct device *dev, struct device_attribute *devattr, return sprintf(buf, "%s\n", sdata->label); } -static int __init get_logical_cpu(int hwcpu) +static int get_logical_cpu(int hwcpu) { int cpu; @@ -192,9 +192,8 @@ static int __init get_logical_cpu(int hwcpu) return -ENOENT; } -static void __init make_sensor_label(struct device_node *np, - struct sensor_data *sdata, - const char *label) +static void make_sensor_label(struct device_node *np, + struct sensor_data *sdata, const char *label) { u32 id; size_t n; -- cgit v1.2.3-58-ga151 From 0432e833191ad4d17b7fc2364941f91dad51db1a Mon Sep 17 00:00:00 2001 From: Holger Hoffstätte Date: Sun, 4 Nov 2018 19:02:42 +0100 Subject: net: phy: realtek: fix RTL8201F sysfs name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since 4.19 the following error in sysfs has appeared when using the r8169 NIC driver: $cd /sys/module/realtek/drivers $ls -l ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory [..garbled dir entries follow..] Apparently the forward slash in "10/100Mbps Ethernet" is interpreted as directory separator that leads nowhere, and was introduced in commit 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions"). Fix this by removing the offending slash in the driver name. Other drivers in net/phy seem to have the same problem, but I cannot test/verify them. Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions") Signed-off-by: Holger Hoffstätte Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 7fc8508b5231..271e8adc39f1 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -220,7 +220,7 @@ static struct phy_driver realtek_drvs[] = { .flags = PHY_HAS_INTERRUPT, }, { .phy_id = 0x001cc816, - .name = "RTL8201F 10/100Mbps Ethernet", + .name = "RTL8201F Fast Ethernet", .phy_id_mask = 0x001fffff, .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, -- cgit v1.2.3-58-ga151 From ea53abfab960909d622ca37bcfb8e1c5378d21cc Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Sun, 4 Nov 2018 14:59:46 -0500 Subject: bonding/802.3ad: fix link_failure_count tracking Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values were read, to fix a problem with slaves getting into weird states, but in the process, broke tracking of link failures, as going straight to BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted) means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because !link_state was already true, we never incremented commit, and never got a chance to call bond_miimon_commit(), where slave->link_failure_count would be incremented. I believe the simple fix here is to mark the slave as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from _FAIL to either _UP or _DOWN, and in the latter case, we now get proper incrementing of link_failure_count again. Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event") CC: Mahesh Bandewar CC: David S. Miller CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index ffa37adb7681..333387f1f1fe 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3112,13 +3112,13 @@ static int bond_slave_netdev_event(unsigned long event, case NETDEV_CHANGE: /* For 802.3ad mode only: * Getting invalid Speed/Duplex values here will put slave - * in weird state. So mark it as link-down for the time + * in weird state. So mark it as link-fail for the time * being and let link-monitoring (miimon) set it right when * correct speeds/duplex are available. */ if (bond_update_speed_duplex(slave) && BOND_MODE(bond) == BOND_MODE_8023AD) - slave->link = BOND_LINK_DOWN; + slave->link = BOND_LINK_FAIL; if (BOND_MODE(bond) == BOND_MODE_8023AD) bond_3ad_adapter_speed_duplex_changed(slave); -- cgit v1.2.3-58-ga151 From 8727b230f665cadb9349a915c60e6abb18fb083c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 13 Oct 2018 13:21:40 +0300 Subject: drm/exynos: checking for NULL instead of IS_ERR() The of_drm_find_panel() function returns error pointers and never NULL but we the driver assumes that ->panel is NULL when it's not present. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Signed-off-by: Dan Carpenter Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 07af7758066d..32f256749789 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1527,7 +1527,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, } dsi->panel = of_drm_find_panel(device->dev.of_node); - if (dsi->panel) { + if (IS_ERR(dsi->panel)) { + dsi->panel = NULL; + } else { drm_panel_attach(dsi->panel, &dsi->connector); dsi->connector.status = connector_status_connected; } -- cgit v1.2.3-58-ga151 From 6ca469e22a30992b4478d2ab88737c70667c1e00 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 5 Oct 2018 11:50:20 +0900 Subject: Revert "drm/exynos/decon5433: implement frame counter" This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b This patch makes it to need get_vblank_counter callback in crtc to get frame counter from decon driver. However, drm_dev->max_vblank_count is a member unique to vendor's DRM driver but in case of ARM DRM, some CRTC devices don't provide the frame counter value. As a result, this patch made extension and clone mode not working. Instead of this patch, we may need separated max_vblank_count which belongs to each CRTC device, or need to implement frame counter emulation for them who don't support HW frame counter. Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 9 --------- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 11 ----------- drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 - 3 files changed, 21 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 94529aa82339..aef487dd8731 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -164,13 +164,6 @@ static u32 decon_get_frame_count(struct decon_context *ctx, bool end) return frm; } -static u32 decon_get_vblank_counter(struct exynos_drm_crtc *crtc) -{ - struct decon_context *ctx = crtc->ctx; - - return decon_get_frame_count(ctx, false); -} - static void decon_setup_trigger(struct decon_context *ctx) { if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG)) @@ -536,7 +529,6 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = { .disable = decon_disable, .enable_vblank = decon_enable_vblank, .disable_vblank = decon_disable_vblank, - .get_vblank_counter = decon_get_vblank_counter, .atomic_begin = decon_atomic_begin, .update_plane = decon_update_plane, .disable_plane = decon_disable_plane, @@ -554,7 +546,6 @@ static int decon_bind(struct device *dev, struct device *master, void *data) int ret; ctx->drm_dev = drm_dev; - drm_dev->max_vblank_count = 0xffffffff; for (win = ctx->first_win; win < WINDOWS_NR; win++) { ctx->configs[win].pixel_formats = decon_formats; diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index eea90251808f..2696289ecc78 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -162,16 +162,6 @@ static void exynos_drm_crtc_disable_vblank(struct drm_crtc *crtc) exynos_crtc->ops->disable_vblank(exynos_crtc); } -static u32 exynos_drm_crtc_get_vblank_counter(struct drm_crtc *crtc) -{ - struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc); - - if (exynos_crtc->ops->get_vblank_counter) - return exynos_crtc->ops->get_vblank_counter(exynos_crtc); - - return 0; -} - static const struct drm_crtc_funcs exynos_crtc_funcs = { .set_config = drm_atomic_helper_set_config, .page_flip = drm_atomic_helper_page_flip, @@ -181,7 +171,6 @@ static const struct drm_crtc_funcs exynos_crtc_funcs = { .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, .enable_vblank = exynos_drm_crtc_enable_vblank, .disable_vblank = exynos_drm_crtc_disable_vblank, - .get_vblank_counter = exynos_drm_crtc_get_vblank_counter, }; struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev, diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index ec9604f1272b..5e61e707f955 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -135,7 +135,6 @@ struct exynos_drm_crtc_ops { void (*disable)(struct exynos_drm_crtc *crtc); int (*enable_vblank)(struct exynos_drm_crtc *crtc); void (*disable_vblank)(struct exynos_drm_crtc *crtc); - u32 (*get_vblank_counter)(struct exynos_drm_crtc *crtc); enum drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc, const struct drm_display_mode *mode); bool (*mode_fixup)(struct exynos_drm_crtc *crtc, -- cgit v1.2.3-58-ga151 From deee3284cba3145a4ee03cbe8541d7a3bfc499e2 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Fri, 26 Oct 2018 12:40:03 +0200 Subject: drm/exynos/dsi: register connector if it is created after drm bind DSI device can be attached after DRM device is registered. In such case newly created connector must be registered by exynos_dsi. The patch fixes exynos_drm on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski Signed-off-by: Andrzej Hajda Tested-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 32f256749789..d81e62ae286a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include @@ -1474,12 +1475,12 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder) { struct exynos_dsi *dsi = encoder_to_dsi(encoder); struct drm_connector *connector = &dsi->connector; + struct drm_device *drm = encoder->dev; int ret; connector->polled = DRM_CONNECTOR_POLL_HPD; - ret = drm_connector_init(encoder->dev, connector, - &exynos_dsi_connector_funcs, + ret = drm_connector_init(drm, connector, &exynos_dsi_connector_funcs, DRM_MODE_CONNECTOR_DSI); if (ret) { DRM_ERROR("Failed to initialize connector with drm\n"); @@ -1489,7 +1490,12 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder) connector->status = connector_status_disconnected; drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs); drm_connector_attach_encoder(connector, encoder); + if (!drm->registered) + return 0; + connector->funcs->reset(connector); + drm_fb_helper_add_one_connector(drm->fb_helper, connector); + drm_connector_register(connector); return 0; } -- cgit v1.2.3-58-ga151 From 989534cfcac89f927fa46b1e0861d92ffbd2c7e4 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Fri, 26 Oct 2018 12:13:28 +0200 Subject: drm/exynos/fbdev: do not skip fbdev init if there are no connectors Since connectors can be created dynamically, fbdev should be initialized even if there are no connectors at the moment. Otherwise fbdev will not be created even after connector's appearance. The patch fixes lack of fbdev on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski Signed-off-by: Andrzej Hajda Tested-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 918dd2c82209..01d182289efa 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -192,7 +192,7 @@ int exynos_drm_fbdev_init(struct drm_device *dev) struct drm_fb_helper *helper; int ret; - if (!dev->mode_config.num_crtc || !dev->mode_config.num_connector) + if (!dev->mode_config.num_crtc) return 0; fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL); -- cgit v1.2.3-58-ga151 From be2e1c9dcf76886a83fb1c433a316e26d4ca2550 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 Oct 2018 13:06:16 +0200 Subject: mtd: docg3: don't set conflicting BCH_CONST_PARAMS option I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: stable@vger.kernel.org Cc: Robert Jarzmik Signed-off-by: Arnd Bergmann Signed-off-by: Boris Brezillon --- drivers/mtd/devices/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index e514d57a0419..aa983422aa97 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -207,7 +207,7 @@ comment "Disk-On-Chip Device Drivers" config MTD_DOCG3 tristate "M-Systems Disk-On-Chip G3" select BCH - select BCH_CONST_PARAMS + select BCH_CONST_PARAMS if !MTD_NAND_BCH select BITREVERSE help This provides an MTD device driver for the M-Systems DiskOnChip -- cgit v1.2.3-58-ga151 From ce97e2bb6687d3af675ecf2e836a9122def53578 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 4 Nov 2018 18:38:35 -0800 Subject: mtd: nand: drop kernel-doc notation for a deleted function parameter Remove kernel-doc notation for a deleted function parameter to prevent a kernel-doc warning: ../drivers/mtd/nand/raw/nand_base.c:603: warning: Excess function parameter 'mtd' description in 'panic_nand_wait' Fixes: f1d46942e823 ("mtd: rawnand: Pass a nand_chip object to chip->waitfunc()") Signed-off-by: Randy Dunlap Cc: Boris Brezillon Cc: Miquel Raynal Cc: Richard Weinberger Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/nand_base.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 05bd0779fe9b..71050a0b31df 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -590,7 +590,6 @@ retry: /** * panic_nand_wait - [GENERIC] wait until the command is done - * @mtd: MTD device structure * @chip: NAND chip structure * @timeo: timeout * -- cgit v1.2.3-58-ga151 From fc09ab7a767394f9ecdad84ea6e85d68b83c8e21 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 5 Nov 2018 11:52:50 +0100 Subject: vga_switcheroo: Fix missing gpu_bound call at audio client registration The commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") added a new ops gpu_bound to be called when GPU gets bound. The patch overlooked, however, that vga_switcheroo_enable() is called only once at GPU is bound. When an audio client is registered after that point, it would miss the gpu_bound call. This leads to the unexpected lack of runtime PM in HD-audio side. For addressing that regression, just call gpu_bound callback manually at vga_switcheroo_register_audio_client() when the GPU was already bound. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201615 Fixes: 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") Cc: Reviewed-by: Lukas Wunner Signed-off-by: Takashi Iwai --- drivers/gpu/vga/vga_switcheroo.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index cf2a18571d48..a132c37d7334 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -380,6 +380,9 @@ int vga_switcheroo_register_audio_client(struct pci_dev *pdev, mutex_unlock(&vgasr_mutex); return -EINVAL; } + /* notify if GPU has been already bound */ + if (ops->gpu_bound) + ops->gpu_bound(pdev, id); } mutex_unlock(&vgasr_mutex); -- cgit v1.2.3-58-ga151 From 6fce3a406108ee6c8a61e2a33e52e9198a626ea0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 4 Oct 2018 11:37:00 +0200 Subject: drm/etnaviv: fix bogus fence complete check in timeout handler The GPU hardware fences and the job out-fences are on different timelines so it's wrong to compare them. Fix this by only looking at the out-fence. Cc: Fixes: 2c83a726d6fb (drm/etnaviv: bring back progress check in job timeout handler) Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_sched.c b/drivers/gpu/drm/etnaviv/etnaviv_sched.c index 69e9b431bf1f..e5a9fae31ab7 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c @@ -93,7 +93,7 @@ static void etnaviv_sched_timedout_job(struct drm_sched_job *sched_job) * If the GPU managed to complete this jobs fence, the timout is * spurious. Bail out. */ - if (fence_completed(gpu, submit->out_fence->seqno)) + if (dma_fence_is_signaled(submit->out_fence)) return; /* -- cgit v1.2.3-58-ga151 From 91d7b67000c6e9bd605624079fee5a084238ad92 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Tue, 16 Oct 2018 09:13:46 +0200 Subject: mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute() We return 0 unconditionally in 'cqspi_direct_read_execute()'. However, 'ret' is set to some error codes in several error handling paths. Return 'ret' instead to propagate the error code. Fixes: ffa639e069fb ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads") Cc: Signed-off-by: Christophe JAILLET Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/cadence-quadspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index e24db817154e..d846428ef038 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -996,7 +996,7 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf, err_unmap: dma_unmap_single(nor->dev, dma_dst, len, DMA_FROM_DEVICE); - return 0; + return ret; } static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, -- cgit v1.2.3-58-ga151 From 90c31cb9a8115a1183daed9a714eea4be0687931 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 19 Oct 2018 11:02:22 +0200 Subject: mtd: spi-nor: Reset nor->addr_width when SFDP parsing failed Commit 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories") removed the 'nor->addr_width = 0;' statement when spi_nor_parse_sfdp() returns an error, thus leaving ->addr_width in an undefined state which can cause trouble when spi_nor_scan() checks its value. Reported-by: Cyrille Pitchen Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories") Signed-off-by: Boris Brezillon Reviewed-by: Tudor Ambarus --- drivers/mtd/spi-nor/spi-nor.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 9407ca5f9443..3e54e31889c7 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -3250,12 +3250,14 @@ static int spi_nor_init_params(struct spi_nor *nor, memcpy(&sfdp_params, params, sizeof(sfdp_params)); memcpy(&prev_map, &nor->erase_map, sizeof(prev_map)); - if (spi_nor_parse_sfdp(nor, &sfdp_params)) + if (spi_nor_parse_sfdp(nor, &sfdp_params)) { + nor->addr_width = 0; /* restore previous erase map */ memcpy(&nor->erase_map, &prev_map, sizeof(nor->erase_map)); - else + } else { memcpy(params, &sfdp_params, sizeof(*params)); + } } return 0; -- cgit v1.2.3-58-ga151 From 7131193157414ac3167d7b2f2feb4c42b415d6c5 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Mon, 5 Nov 2018 18:52:21 +0100 Subject: net: alx: make alx_drv_name static alx_drv_name is not used outside main.c, so there's no reason for it to have external linkage. Signed-off-by: Rasmus Villemoes Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/alx.h | 1 - drivers/net/ethernet/atheros/alx/main.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h index 78c5de467426..9d0e74f6b089 100644 --- a/drivers/net/ethernet/atheros/alx/alx.h +++ b/drivers/net/ethernet/atheros/alx/alx.h @@ -140,6 +140,5 @@ struct alx_priv { }; extern const struct ethtool_ops alx_ethtool_ops; -extern const char alx_drv_name[]; #endif diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index 7968c644ad86..c131cfc1b79d 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -49,7 +49,7 @@ #include "hw.h" #include "reg.h" -const char alx_drv_name[] = "alx"; +static const char alx_drv_name[] = "alx"; static void alx_free_txbuf(struct alx_tx_queue *txq, int entry) { -- cgit v1.2.3-58-ga151 From d9cccfa7c4d1d9ef967ec9308df7304a18609b30 Mon Sep 17 00:00:00 2001 From: Liam Merwick Date: Fri, 2 Nov 2018 14:04:23 +0000 Subject: xen/grant-table: Fix incorrect gnttab_dma_free_pages() pr_debug message If a call to xenmem_reservation_increase() in gnttab_dma_free_pages() fails it triggers a message "Failed to decrease reservation..." which should be "Failed to increase reservation..." Fixes: 9bdc7304f536 ('xen/grant-table: Allow allocating buffers suitable for DMA') Reported-by: Ross Philipson Signed-off-by: Liam Merwick Reviewed-by: Mark Kanda Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross --- drivers/xen/grant-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 84575baceebc..97341fa75458 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -914,7 +914,7 @@ int gnttab_dma_free_pages(struct gnttab_dma_alloc_args *args) ret = xenmem_reservation_increase(args->nr_pages, args->frames); if (ret != args->nr_pages) { - pr_debug("Failed to decrease reservation for DMA buffer\n"); + pr_debug("Failed to increase reservation for DMA buffer\n"); ret = -EFAULT; } else { ret = 0; -- cgit v1.2.3-58-ga151 From 6cc4a0863c9709c512280c64e698d68443ac8053 Mon Sep 17 00:00:00 2001 From: Manjunath Patil Date: Tue, 30 Oct 2018 09:49:21 -0700 Subject: xen-blkfront: fix kernel panic with negotiate_mq error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - #8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... #9 blkif_free at ffffffffa0149aaa [xen_blkfront] #10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] #11 blkback_changed at ffffffffa014ea8b [xen_blkfront] #12 xenbus_otherend_changed at ffffffff81424670 #13 backend_changed at ffffffff81426dc3 #14 xenwatch_thread at ffffffff81422f29 #15 kthread at ffffffff810abe6a #16 ret_from_fork at ffffffff81754078 Cc: stable@vger.kernel.org Fixes: 7ed8ce1c5fc7 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by: Manjunath Patil Acked-by: Roger Pau Monné Signed-off-by: Juergen Gross --- drivers/block/xen-blkfront.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 9eea83ae01c6..9ac3999a55b7 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1919,6 +1919,7 @@ static int negotiate_mq(struct blkfront_info *info) GFP_KERNEL); if (!info->rinfo) { xenbus_dev_fatal(info->xbdev, -ENOMEM, "allocating ring_info structure"); + info->nr_rings = 0; return -ENOMEM; } -- cgit v1.2.3-58-ga151 From ba26cd7d58dcc50e25c8f02b5376c05046b181dc Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 5 Nov 2018 08:58:35 +0100 Subject: mtd: sa1100: avoid VLA in sa1100_setup_mtd Enabling -Wvla found another variable-length array with randconfig testing: drivers/mtd/maps/sa1100-flash.c: In function 'sa1100_setup_mtd': drivers/mtd/maps/sa1100-flash.c:224:10: error: ISO C90 forbids variable length array 'cdev' [-Werror=vla] Dynamically allocate the cdev array passed to mtd_concat_create() instead of using a VLA. Reported-by: Arnd Bergmann Signed-off-by: Boris Brezillon Cc: Kees Cook Cc: Olof Johansson --- drivers/mtd/maps/sa1100-flash.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 784c6e1a0391..fd5fe12d7461 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -221,7 +221,14 @@ static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev, info->mtd = info->subdev[0].mtd; ret = 0; } else if (info->num_subdev > 1) { - struct mtd_info *cdev[nr]; + struct mtd_info **cdev; + + cdev = kmalloc_array(nr, sizeof(*cdev), GFP_KERNEL); + if (!cdev) { + ret = -ENOMEM; + goto err; + } + /* * We detected multiple devices. Concatenate them together. */ @@ -230,6 +237,7 @@ static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev, info->mtd = mtd_concat_create(cdev, info->num_subdev, plat->name); + kfree(cdev); if (info->mtd == NULL) { ret = -ENXIO; goto err; -- cgit v1.2.3-58-ga151 From 3fc202e81db70bf60beb9296eefd4e48d6304607 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:14:32 +0100 Subject: HID: asus: fix build warning wiht CONFIG_ASUS_WMI disabled asus_wmi_evaluate_method() is an empty dummy function when CONFIG_ASUS_WMI is disabled, or not reachable from a built-in device driver. This leads to a theoretical evaluation of an uninitialized variable that the compiler complains about, failing to check that the hardcoded return value makes this an unreachable code path: In file included from include/linux/printk.h:336, from include/linux/kernel.h:14, from include/linux/list.h:9, from include/linux/dmi.h:5, from drivers/hid/hid-asus.c:29: drivers/hid/hid-asus.c: In function 'asus_input_configured': include/linux/dynamic_debug.h:135:3: error: 'value' may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^~~~~~~~~~~~~~~~~ drivers/hid/hid-asus.c:359:6: note: 'value' was declared here u32 value; ^~~~~ With an extra IS_ENABLED() check, the warning goes away. Fixes: 3b692c55e58d ("HID: asus: only support backlight when it's not driven by WMI") Signed-off-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Signed-off-by: Jiri Kosina --- drivers/hid/hid-asus.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index dc6d6477e961..a1fa2fc8c9b5 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -359,6 +359,9 @@ static bool asus_kbd_wmi_led_control_present(struct hid_device *hdev) u32 value; int ret; + if (!IS_ENABLED(CONFIG_ASUS_WMI)) + return false; + ret = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2, ASUS_WMI_DEVID_KBD_BACKLIGHT, 0, &value); hid_dbg(hdev, "WMI backlight check: rc %d value %x", ret, value); -- cgit v1.2.3-58-ga151 From 18354b422ce4ce1124277dfe8f4f094bae0102ad Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 23 Oct 2018 21:21:02 +0300 Subject: drm/i915: Don't apply the 16Gb DIMM wm latency w/a to BXT/GLK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The 16Gb DIMM w/a is not applicable to BXT or GLK. Limit it to the appropriate platforms. This was especially harsh on GLK since we don't even try to read the DIMM information on that platforms, hence valid_dimm was always false and thus we always tried to apply the w/a. Furthermore the w/a pushed the level 0 latency above the level 1 latency, which doesn't really make sense. v2: Do the check when populating is_16gb_dimm (Mahesh) Cc: Mahesh Kumar Cc: Maarten Lankhorst Fixes: 86b592876cb6 ("drm/i915: Implement 16GB dimm wa for latency level-0") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181023182102.31549-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi Reviewed-by: Mahesh Kumar (cherry picked from commit 5d6f36b27d2764f3dc940606ee6b7ec5c669af3e) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_drv.c | 15 ++++++++------- drivers/gpu/drm/i915/i915_drv.h | 1 - drivers/gpu/drm/i915/intel_pm.c | 3 +-- 3 files changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 44e2c0f5ec50..ffdbbac4400e 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1175,8 +1175,6 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv) return -EINVAL; } - dram_info->valid_dimm = true; - /* * If any of the channel is single rank channel, worst case output * will be same as if single rank memory, so consider single rank @@ -1193,8 +1191,7 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv) return -EINVAL; } - if (ch0.is_16gb_dimm || ch1.is_16gb_dimm) - dram_info->is_16gb_dimm = true; + dram_info->is_16gb_dimm = ch0.is_16gb_dimm || ch1.is_16gb_dimm; dev_priv->dram_info.symmetric_memory = intel_is_dram_symmetric(val_ch0, val_ch1, @@ -1314,7 +1311,6 @@ bxt_get_dram_info(struct drm_i915_private *dev_priv) return -EINVAL; } - dram_info->valid_dimm = true; dram_info->valid = true; return 0; } @@ -1327,12 +1323,17 @@ intel_get_dram_info(struct drm_i915_private *dev_priv) int ret; dram_info->valid = false; - dram_info->valid_dimm = false; - dram_info->is_16gb_dimm = false; dram_info->rank = I915_DRAM_RANK_INVALID; dram_info->bandwidth_kbps = 0; dram_info->num_channels = 0; + /* + * Assume 16Gb DIMMs are present until proven otherwise. + * This is only used for the level 0 watermark latency + * w/a which does not apply to bxt/glk. + */ + dram_info->is_16gb_dimm = !IS_GEN9_LP(dev_priv); + if (INTEL_GEN(dev_priv) < 9 || IS_GEMINILAKE(dev_priv)) return; diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8624b4bdc242..9102571e9692 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1948,7 +1948,6 @@ struct drm_i915_private { struct dram_info { bool valid; - bool valid_dimm; bool is_16gb_dimm; u8 num_channels; enum dram_rank { diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 1db9b8328275..245f0022bcfd 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2881,8 +2881,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv, * any underrun. If not able to get Dimm info assume 16GB dimm * to avoid any underrun. */ - if (!dev_priv->dram_info.valid_dimm || - dev_priv->dram_info.is_16gb_dimm) + if (dev_priv->dram_info.is_16gb_dimm) wm[0] += 1; } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { -- cgit v1.2.3-58-ga151 From 6503493145cba4413ecd3d4d153faeef4a1e9b85 Mon Sep 17 00:00:00 2001 From: Clint Taylor Date: Thu, 25 Oct 2018 11:52:00 -0700 Subject: drm/i915/hdmi: Add HDMI 2.0 audio clock recovery N values HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value mode instead of HDMI specification values. V2: Fix 88.2 Hz N value Cc: Jani Nikula Cc: stable@vger.kernel.org Signed-off-by: Clint Taylor Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com (cherry picked from commit 5a400aa3c562c4a726b4da286e63c96db905ade1) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_audio.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 769f3f586661..ee3ca2de983b 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -144,6 +144,9 @@ static const struct { /* HDMI N/CTS table */ #define TMDS_297M 297000 #define TMDS_296M 296703 +#define TMDS_594M 594000 +#define TMDS_593M 593407 + static const struct { int sample_rate; int clock; @@ -164,6 +167,20 @@ static const struct { { 176400, TMDS_297M, 18816, 247500 }, { 192000, TMDS_296M, 23296, 281250 }, { 192000, TMDS_297M, 20480, 247500 }, + { 44100, TMDS_593M, 8918, 937500 }, + { 44100, TMDS_594M, 9408, 990000 }, + { 48000, TMDS_593M, 5824, 562500 }, + { 48000, TMDS_594M, 6144, 594000 }, + { 32000, TMDS_593M, 5824, 843750 }, + { 32000, TMDS_594M, 3072, 445500 }, + { 88200, TMDS_593M, 17836, 937500 }, + { 88200, TMDS_594M, 18816, 990000 }, + { 96000, TMDS_593M, 11648, 562500 }, + { 96000, TMDS_594M, 12288, 594000 }, + { 176400, TMDS_593M, 35672, 937500 }, + { 176400, TMDS_594M, 37632, 990000 }, + { 192000, TMDS_593M, 23296, 562500 }, + { 192000, TMDS_594M, 24576, 594000 }, }; /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */ -- cgit v1.2.3-58-ga151 From c58281056a8b26d5d9dc15c19859a7880835ef44 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 25 Oct 2018 10:18:22 +0100 Subject: drm/i915: Mark up GTT sizes as u64 Since we use a 64b virtual GTT irrespective of the system, we want to ensure that the GTT computations remains 64b even on 32b systems, including treatment of huge virtual pages. No code generation changes on 64b: Reported-by: Sergii Romantsov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-1-chris@chris-wilson.co.uk (cherry picked from commit 9125963a9494253fa5a29cc1b4169885d2be7042) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +- drivers/gpu/drm/i915/i915_gem_gtt.h | 6 +++--- drivers/gpu/drm/i915/selftests/huge_pages.c | 2 +- drivers/gpu/drm/i915/selftests/i915_gem_gtt.c | 6 +++--- 4 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 56c7f8637311..47c302543799 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -1757,7 +1757,7 @@ static void gen6_dump_ppgtt(struct i915_hw_ppgtt *base, struct seq_file *m) if (i == 4) continue; - seq_printf(m, "\t\t(%03d, %04d) %08lx: ", + seq_printf(m, "\t\t(%03d, %04d) %08llx: ", pde, pte, (pde * GEN6_PTES + pte) * I915_GTT_PAGE_SIZE); for (i = 0; i < 4; i++) { diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h index 7e2af5f4f39b..aa8307043036 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.h +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h @@ -42,9 +42,9 @@ #include "i915_selftest.h" #include "i915_timeline.h" -#define I915_GTT_PAGE_SIZE_4K BIT(12) -#define I915_GTT_PAGE_SIZE_64K BIT(16) -#define I915_GTT_PAGE_SIZE_2M BIT(21) +#define I915_GTT_PAGE_SIZE_4K BIT_ULL(12) +#define I915_GTT_PAGE_SIZE_64K BIT_ULL(16) +#define I915_GTT_PAGE_SIZE_2M BIT_ULL(21) #define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K #define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M diff --git a/drivers/gpu/drm/i915/selftests/huge_pages.c b/drivers/gpu/drm/i915/selftests/huge_pages.c index 8d03f64eabd7..5c22f2c8d4cf 100644 --- a/drivers/gpu/drm/i915/selftests/huge_pages.c +++ b/drivers/gpu/drm/i915/selftests/huge_pages.c @@ -551,7 +551,7 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg) err = igt_check_page_sizes(vma); if (vma->page_sizes.gtt != I915_GTT_PAGE_SIZE_4K) { - pr_err("page_sizes.gtt=%u, expected %lu\n", + pr_err("page_sizes.gtt=%u, expected %llu\n", vma->page_sizes.gtt, I915_GTT_PAGE_SIZE_4K); err = -EINVAL; } diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c index 8e2e269db97e..127d81513671 100644 --- a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c @@ -1337,7 +1337,7 @@ static int igt_gtt_reserve(void *arg) GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); if (vma->node.start != total || vma->node.size != 2*I915_GTT_PAGE_SIZE) { - pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %lx)\n", + pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", vma->node.start, vma->node.size, total, 2*I915_GTT_PAGE_SIZE); err = -EINVAL; @@ -1386,7 +1386,7 @@ static int igt_gtt_reserve(void *arg) GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); if (vma->node.start != total || vma->node.size != 2*I915_GTT_PAGE_SIZE) { - pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %lx)\n", + pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", vma->node.start, vma->node.size, total, 2*I915_GTT_PAGE_SIZE); err = -EINVAL; @@ -1430,7 +1430,7 @@ static int igt_gtt_reserve(void *arg) GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); if (vma->node.start != offset || vma->node.size != 2*I915_GTT_PAGE_SIZE) { - pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %lx)\n", + pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", vma->node.start, vma->node.size, offset, 2*I915_GTT_PAGE_SIZE); err = -EINVAL; -- cgit v1.2.3-58-ga151 From 085603287452fc96376ed4888bf29f8c095d2b40 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 25 Oct 2018 10:18:23 +0100 Subject: drm/i915: Compare user's 64b GTT offset even on 32b Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by: Sergii Romantsov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk (cherry picked from commit 6fc4e48f9ed46e9adff236a0c350074aafa3b7fa) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/gvt/gtt.h | 1 - drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +- drivers/gpu/drm/i915/i915_gem_gtt.h | 2 ++ 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h index 7a9b36176efb..bfb6f652b09f 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.h +++ b/drivers/gpu/drm/i915/gvt/gtt.h @@ -35,7 +35,6 @@ #define _GVT_GTT_H_ #define I915_GTT_PAGE_SHIFT 12 -#define I915_GTT_PAGE_MASK (~(I915_GTT_PAGE_SIZE - 1)) struct intel_vgpu_mm; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 09187286d346..1aaccbe7e1de 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -460,7 +460,7 @@ eb_validate_vma(struct i915_execbuffer *eb, * any non-page-aligned or non-canonical addresses. */ if (unlikely(entry->flags & EXEC_OBJECT_PINNED && - entry->offset != gen8_canonical_addr(entry->offset & PAGE_MASK))) + entry->offset != gen8_canonical_addr(entry->offset & I915_GTT_PAGE_MASK))) return -EINVAL; /* pad_to_size was once a reserved field, so sanitize it */ diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h index aa8307043036..5d2c5ba55ad8 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.h +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h @@ -49,6 +49,8 @@ #define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K #define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M +#define I915_GTT_PAGE_MASK -I915_GTT_PAGE_SIZE + #define I915_GTT_MIN_ALIGNMENT I915_GTT_PAGE_SIZE #define I915_FENCE_REG_NONE -1 -- cgit v1.2.3-58-ga151 From 2c2f6e30d5f29691e3563d334ce208d3a1907f49 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 25 Oct 2018 17:56:36 -0700 Subject: drm/i915/glk: Remove 99% limitation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While checking the opportunity to add a display_gen check to allow glk and cnl to be on same bucket I noticed these FIXME cases here. So I got the confirmation from HW architect that we actually never needed this workaround. "GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk." So, this reverts commit 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Fixes: 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Cc: Ville Syrjälä Cc: Madhav Chauhan Cc: Jani Nikula Cc: Clinton Taylor Cc: Arthur J Runyan Signed-off-by: Rodrigo Vivi Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181026005636.22274-1-rodrigo.vivi@intel.com (cherry picked from commit 42882336e62aab00278114392a16374f272a0c99) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_cdclk.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c index 29075c763428..8d74276029e6 100644 --- a/drivers/gpu/drm/i915/intel_cdclk.c +++ b/drivers/gpu/drm/i915/intel_cdclk.c @@ -2138,16 +2138,8 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv, static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv, int pixel_rate) { - if (INTEL_GEN(dev_priv) >= 10) + if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) return DIV_ROUND_UP(pixel_rate, 2); - else if (IS_GEMINILAKE(dev_priv)) - /* - * FIXME: Avoid using a pixel clock that is more than 99% of the cdclk - * as a temporary workaround. Use a higher cdclk instead. (Note that - * intel_compute_max_dotclk() limits the max pixel clock to 99% of max - * cdclk.) - */ - return DIV_ROUND_UP(pixel_rate * 100, 2 * 99); else if (IS_GEN9(dev_priv) || IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) return pixel_rate; @@ -2543,14 +2535,8 @@ static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv) { int max_cdclk_freq = dev_priv->max_cdclk_freq; - if (INTEL_GEN(dev_priv) >= 10) + if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) return 2 * max_cdclk_freq; - else if (IS_GEMINILAKE(dev_priv)) - /* - * FIXME: Limiting to 99% as a temporary workaround. See - * intel_min_cdclk() for details. - */ - return 2 * max_cdclk_freq * 99 / 100; else if (IS_GEN9(dev_priv) || IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) return max_cdclk_freq; -- cgit v1.2.3-58-ga151 From 76271ef2638ca8e4bf2884cad664a34be0d5a42b Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Fri, 5 Oct 2018 11:56:42 -0700 Subject: drm/i915: Fix VIDEO_DIP_CTL bit shifts The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused. v2: Moves definitions in another patch (Manasi) Cc: Manasi Navare Cc: Anusha Srivatsa Cc: Rodrigo Vivi Fixes: 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers") Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Manasi Navare Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com (cherry picked from commit 09209662618f9fdc38b8d4da39040c8829fd2d57) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_reg.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 7c491ea3d052..f2d92aee721b 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -4593,12 +4593,12 @@ enum { #define DRM_DIP_ENABLE (1 << 28) #define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) #define VDIP_ENABLE_PPS (1 << 24) /* Panel power sequencing */ -- cgit v1.2.3-58-ga151 From f42f343887016330b321dd40eebc68c7292e4f1b Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 29 Oct 2018 16:00:31 +0200 Subject: drm/i915: Fix error handling for the NV12 fb dimensions check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Let's not leak obj->framebuffer_references when we decide that the framebuffer domensions are not suitable for NV12. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst Cc: Vidya Srinivas Fixes: e44134f2673c ("drm/i915: Add NV12 support to intel_framebuffer_init") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper (cherry picked from commit 3b90946fcb6f13b65888c380461793a9dea9d1f4) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9741cc419e1b..b8dfdbc9ca1f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14646,7 +14646,7 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb, fb->height < SKL_MIN_YUV_420_SRC_H || (fb->width % 4) != 0 || (fb->height % 4) != 0)) { DRM_DEBUG_KMS("src dimensions not correct for NV12\n"); - return -EINVAL; + goto err; } for (i = 0; i < fb->format->num_planes; i++) { -- cgit v1.2.3-58-ga151 From e528c2affcf216b3d02b22004895cb678769629b Mon Sep 17 00:00:00 2001 From: Manasi Navare Date: Tue, 23 Oct 2018 12:12:47 -0700 Subject: drm/i915/icl: Fix the macros for DFLEXDPMLE register bits MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec. Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE") Cc: Animesh Manna Cc: Paulo Zanoni Cc: Jose Roberto de Souza Cc: # v4.19+ Signed-off-by: Manasi Navare Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com (cherry picked from commit b4335ec0a3ee6229a570755f8fb95dc8a7c694f2) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_reg.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f2d92aee721b..e31c27e45734 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2095,8 +2095,12 @@ enum i915_power_well_id { /* ICL PHY DFLEX registers */ #define PORT_TX_DFLEXDPMLE1 _MMIO(0x1638C0) -#define DFLEXDPMLE1_DPMLETC_MASK(n) (0xf << (4 * (n))) -#define DFLEXDPMLE1_DPMLETC(n, x) ((x) << (4 * (n))) +#define DFLEXDPMLE1_DPMLETC_MASK(tc_port) (0xf << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML0(tc_port) (1 << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML1_0(tc_port) (3 << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML3(tc_port) (8 << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) (12 << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML3_0(tc_port) (15 << (4 * (tc_port))) /* BXT PHY Ref registers */ #define _PORT_REF_DW3_A 0x16218C -- cgit v1.2.3-58-ga151 From 0014868b9c3c1dda1de6711cf58c3486fb422d07 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 2 Nov 2018 16:12:09 +0000 Subject: drm/i915: Mark pin flags as u64 Since the flags are being used to operate on a u64 variable, they too need to be marked as such so that the inverses are full width (and not zero extended on 32b kernels and bdw+). Reported-by: Sergii Romantsov Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Reviewed-by: Lionel Landwerlin Reviewed-by: Michal Wajdeczko Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk (cherry picked from commit 83b466b1dc5f0b4d33f0a901e8b00197a8f3582d) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_gem_gtt.h | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h index 5d2c5ba55ad8..28039290655c 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.h +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h @@ -661,20 +661,20 @@ int i915_gem_gtt_insert(struct i915_address_space *vm, u64 start, u64 end, unsigned int flags); /* Flags used by pin/bind&friends. */ -#define PIN_NONBLOCK BIT(0) -#define PIN_MAPPABLE BIT(1) -#define PIN_ZONE_4G BIT(2) -#define PIN_NONFAULT BIT(3) -#define PIN_NOEVICT BIT(4) - -#define PIN_MBZ BIT(5) /* I915_VMA_PIN_OVERFLOW */ -#define PIN_GLOBAL BIT(6) /* I915_VMA_GLOBAL_BIND */ -#define PIN_USER BIT(7) /* I915_VMA_LOCAL_BIND */ -#define PIN_UPDATE BIT(8) - -#define PIN_HIGH BIT(9) -#define PIN_OFFSET_BIAS BIT(10) -#define PIN_OFFSET_FIXED BIT(11) +#define PIN_NONBLOCK BIT_ULL(0) +#define PIN_MAPPABLE BIT_ULL(1) +#define PIN_ZONE_4G BIT_ULL(2) +#define PIN_NONFAULT BIT_ULL(3) +#define PIN_NOEVICT BIT_ULL(4) + +#define PIN_MBZ BIT_ULL(5) /* I915_VMA_PIN_OVERFLOW */ +#define PIN_GLOBAL BIT_ULL(6) /* I915_VMA_GLOBAL_BIND */ +#define PIN_USER BIT_ULL(7) /* I915_VMA_LOCAL_BIND */ +#define PIN_UPDATE BIT_ULL(8) + +#define PIN_HIGH BIT_ULL(9) +#define PIN_OFFSET_BIAS BIT_ULL(10) +#define PIN_OFFSET_FIXED BIT_ULL(11) #define PIN_OFFSET_MASK (-I915_GTT_PAGE_SIZE) #endif -- cgit v1.2.3-58-ga151 From 6a8915d0f8cf323e1beb792a33095cf652db4056 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 5 Nov 2018 21:46:04 +0200 Subject: drm/i915: Don't oops during modeset shutdown after lpe audio deinit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We deinit the lpe audio device before we call drm_atomic_helper_shutdown(), which means the platform device may already be gone when it comes time to shut down the crtc. As we don't know when the last reference to the platform device gets dropped by the audio driver we can't assume that the device and its data are still around when turning off the crtc. Mark the platform device as gone as soon as we do the audio deinit. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit f45a7977d1140c11f334e01a9f77177ed68e3bfa) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_lpe_audio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index cdf19553ffac..5d5336fbe7b0 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -297,8 +297,10 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) lpe_audio_platdev_destroy(dev_priv); irq_free_desc(dev_priv->lpe_audio.irq); -} + dev_priv->lpe_audio.irq = -1; + dev_priv->lpe_audio.platdev = NULL; +} /** * intel_lpe_audio_notify() - notify lpe audio event -- cgit v1.2.3-58-ga151 From 7f4cedd882f7cae83177066c2b239ef457ce4a42 Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Fri, 5 Oct 2018 23:59:50 +0200 Subject: drm/sun4i: tcon: fix check of tcon->panel null pointer Since tcon->panel is a pointer returned by of_drm_find_panel() need to check if it is not NULL, hence a valid pointer. IS_ERR() instead checks return error values, not NULL pointers. Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)". Signed-off-by: Giulio Benetti Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-1-giulio.benetti@micronovasrl.com --- drivers/gpu/drm/sun4i/sun4i_lvds.c | 4 ++-- drivers/gpu/drm/sun4i/sun4i_rgb.c | 4 ++-- drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c index af7dcb6da351..e7eb0d1e17be 100644 --- a/drivers/gpu/drm/sun4i/sun4i_lvds.c +++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c @@ -75,7 +75,7 @@ static void sun4i_lvds_encoder_enable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Enabling LVDS output\n"); - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { drm_panel_prepare(tcon->panel); drm_panel_enable(tcon->panel); } @@ -88,7 +88,7 @@ static void sun4i_lvds_encoder_disable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Disabling LVDS output\n"); - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { drm_panel_disable(tcon->panel); drm_panel_unprepare(tcon->panel); } diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index bf068da6b12e..f4a22689eb54 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -135,7 +135,7 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Enabling RGB output\n"); - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { drm_panel_prepare(tcon->panel); drm_panel_enable(tcon->panel); } @@ -148,7 +148,7 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Disabling RGB output\n"); - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { drm_panel_disable(tcon->panel); drm_panel_unprepare(tcon->panel); } diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index c78cd35a1294..e4b3bd0307ef 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -555,7 +555,7 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, * Following code is a way to avoid quirks all around TCON * and DOTCLOCK drivers. */ - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { struct drm_panel *panel = tcon->panel; struct drm_connector *connector = panel->connector; struct drm_display_info display_info = connector->display_info; -- cgit v1.2.3-58-ga151 From a8939766c75c06b5a0ab691ecbba9347e4e520cf Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Fri, 5 Oct 2018 23:59:51 +0200 Subject: drm/sun4i: tcon: prevent tcon->panel dereference if NULL If tcon->panel pointer is NULL, trying to dereference from it (i.e. tcon->panel->connector) will cause a null pointer dereference. Add tcon->panel null pointer check before calling sun4i_tcon0_mode_set_dithering(). Signed-off-by: Giulio Benetti Fixes: f11adcecbd5f ("drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels") Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index e4b3bd0307ef..f949287d926c 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -491,7 +491,8 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, sun4i_tcon0_mode_set_common(tcon, mode); /* Set dithering if needed */ - sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector); + if (tcon->panel) + sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector); /* Adjust clock delay */ clk_delay = sun4i_tcon_get_clk_delay(mode, 0); -- cgit v1.2.3-58-ga151 From df5e31c204b34e8d9e5ec33f5b28e960c4f25e14 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 25 Oct 2018 16:05:36 +0300 Subject: drm/i915: Fix ilk+ watermarks when disabling pipes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We're no longer programming any watermarks when we're disabling a pipe. That means ilk_wm_merge() & co. will keep considering the any pipe that is getting disabled as still enabled. Thus we either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal ones (hsw-bdw). This seems to have been broken by commit b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2."). Before that we apparently had some difference between the intermediate and optimal watermarks and so we would program the optiomal ones. Now intermediate and optimal are identical for disabled pipes and so we don't program either. Fix this by programming the intermediate watermarks even for disabled pipes. We were already doing that for skl+. We'll leave out gmch platforms for now since those do the merging in a different manner and should work as is. We'll want to unify this eventually, but play it safe for now and just put in a FIXME. Cc: stable@vger.kernel.org Cc: Matt Roper Cc: Maarten Lankhorst Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst #irc (cherry picked from commit a748faea3bfd7fd1d1485bc1c426c7d460cc6503) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_display.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b8dfdbc9ca1f..23d8008a93bb 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12768,17 +12768,12 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) intel_check_cpu_fifo_underruns(dev_priv); intel_check_pch_fifo_underruns(dev_priv); - if (!new_crtc_state->active) { - /* - * Make sure we don't call initial_watermarks - * for ILK-style watermark updates. - * - * No clue what this is supposed to achieve. - */ - if (INTEL_GEN(dev_priv) >= 9) - dev_priv->display.initial_watermarks(intel_state, - to_intel_crtc_state(new_crtc_state)); - } + /* FIXME unify this for all platforms */ + if (!new_crtc_state->active && + !HAS_GMCH_DISPLAY(dev_priv) && + dev_priv->display.initial_watermarks) + dev_priv->display.initial_watermarks(intel_state, + to_intel_crtc_state(new_crtc_state)); } } -- cgit v1.2.3-58-ga151 From f98e8a572bddbf27032114127d2fcc78fa5e6a9d Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Thu, 1 Nov 2018 14:15:49 +0100 Subject: clk: fixed-factor: fix of_node_get-put imbalance When the fixed factor clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Reported-by: Alan Tull Fixes: 971451b3b15d ("clk: fixed-factor: Convert into a module platform driver") Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Stephen Boyd --- drivers/clk/clk-fixed-factor.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c index ef0ca9414f37..ff83e899df71 100644 --- a/drivers/clk/clk-fixed-factor.c +++ b/drivers/clk/clk-fixed-factor.c @@ -210,6 +210,7 @@ static int of_fixed_factor_clk_remove(struct platform_device *pdev) { struct clk *clk = platform_get_drvdata(pdev); + of_clk_del_provider(pdev->dev.of_node); clk_unregister_fixed_factor(clk); return 0; -- cgit v1.2.3-58-ga151 From 5d96c9342c23ee1d084802dcf064caa67ecaa45b Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Thu, 25 Oct 2018 18:37:28 -0600 Subject: acpi/nfit, x86/mce: Handle only uncorrectable machine checks The MCE handler for nfit devices is called for memory errors on a Non-Volatile DIMM and adds the error location to a 'badblocks' list. This list is used by the various NVDIMM drivers to avoid consuming known poison locations during IO. The MCE handler gets called for both corrected and uncorrectable errors. Until now, both kinds of errors have been added to the badblocks list. However, corrected memory errors indicate that the problem has already been fixed by hardware, and the resulting interrupt is merely a notification to Linux. As far as future accesses to that location are concerned, it is perfectly fine to use, and thus doesn't need to be included in the above badblocks list. Add a check in the nfit MCE handler to filter out corrected mce events, and only process uncorrectable errors. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Omar Avelar Signed-off-by: Vishal Verma Signed-off-by: Borislav Petkov CC: Arnd Bergmann CC: Dan Williams CC: Dave Jiang CC: elliott@hpe.com CC: "H. Peter Anvin" CC: Ingo Molnar CC: Len Brown CC: linux-acpi@vger.kernel.org CC: linux-edac CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo CC: "Rafael J. Wysocki" CC: Ross Zwisler CC: stable CC: Thomas Gleixner CC: Tony Luck CC: x86-ml CC: Yazen Ghannam Link: http://lkml.kernel.org/r/20181026003729.8420-1-vishal.l.verma@intel.com --- arch/x86/include/asm/mce.h | 1 + arch/x86/kernel/cpu/mcheck/mce.c | 3 ++- drivers/acpi/nfit/mce.c | 4 ++-- 3 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 4da9b1c58d28..dbd9fe2f6163 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -221,6 +221,7 @@ static inline void mce_hygon_feature_init(struct cpuinfo_x86 *c) { return mce_am int mce_available(struct cpuinfo_x86 *c); bool mce_is_memory_error(struct mce *m); +bool mce_is_correctable(struct mce *m); DECLARE_PER_CPU(unsigned, mce_exception_count); DECLARE_PER_CPU(unsigned, mce_poll_count); diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 8c66d2fc8f81..77527b8ea982 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -534,7 +534,7 @@ bool mce_is_memory_error(struct mce *m) } EXPORT_SYMBOL_GPL(mce_is_memory_error); -static bool mce_is_correctable(struct mce *m) +bool mce_is_correctable(struct mce *m) { if (m->cpuvendor == X86_VENDOR_AMD && m->status & MCI_STATUS_DEFERRED) return false; @@ -547,6 +547,7 @@ static bool mce_is_correctable(struct mce *m) return true; } +EXPORT_SYMBOL_GPL(mce_is_correctable); static bool cec_add_mce(struct mce *m) { diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c index e9626bf6ca29..7a51707f87e9 100644 --- a/drivers/acpi/nfit/mce.c +++ b/drivers/acpi/nfit/mce.c @@ -25,8 +25,8 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val, struct acpi_nfit_desc *acpi_desc; struct nfit_spa *nfit_spa; - /* We only care about memory errors */ - if (!mce_is_memory_error(mce)) + /* We only care about uncorrectable memory errors */ + if (!mce_is_memory_error(mce) || mce_is_correctable(mce)) return NOTIFY_DONE; /* -- cgit v1.2.3-58-ga151 From e8a308e5f47e545e0d41d0686c00f5f5217c5f61 Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Thu, 25 Oct 2018 18:37:29 -0600 Subject: acpi/nfit, x86/mce: Validate a MCE's address before using it The NFIT machine check handler uses the physical address from the mce structure, and compares it against information in the ACPI NFIT table to determine whether that location lies on an NVDIMM. The mce->addr field however may not always be valid, and this is indicated by the MCI_STATUS_ADDRV bit in the status field. Export mce_usable_address() which already performs validation for the address, and use it in the NFIT handler. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Robert Elliott Signed-off-by: Vishal Verma Signed-off-by: Borislav Petkov CC: Arnd Bergmann Cc: Dan Williams CC: Dave Jiang CC: elliott@hpe.com CC: "H. Peter Anvin" CC: Ingo Molnar CC: Len Brown CC: linux-acpi@vger.kernel.org CC: linux-edac CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo CC: "Rafael J. Wysocki" CC: Ross Zwisler CC: stable CC: Thomas Gleixner CC: Tony Luck CC: x86-ml CC: Yazen Ghannam Link: http://lkml.kernel.org/r/20181026003729.8420-2-vishal.l.verma@intel.com --- arch/x86/include/asm/mce.h | 1 + arch/x86/kernel/cpu/mcheck/mce.c | 3 ++- drivers/acpi/nfit/mce.c | 4 ++++ 3 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index dbd9fe2f6163..c1a812bd5a27 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -222,6 +222,7 @@ static inline void mce_hygon_feature_init(struct cpuinfo_x86 *c) { return mce_am int mce_available(struct cpuinfo_x86 *c); bool mce_is_memory_error(struct mce *m); bool mce_is_correctable(struct mce *m); +int mce_usable_address(struct mce *m); DECLARE_PER_CPU(unsigned, mce_exception_count); DECLARE_PER_CPU(unsigned, mce_poll_count); diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 77527b8ea982..36d2696c9563 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -485,7 +485,7 @@ static void mce_report_event(struct pt_regs *regs) * be somewhat complicated (e.g. segment offset would require an instruction * parser). So only support physical addresses up to page granuality for now. */ -static int mce_usable_address(struct mce *m) +int mce_usable_address(struct mce *m) { if (!(m->status & MCI_STATUS_ADDRV)) return 0; @@ -505,6 +505,7 @@ static int mce_usable_address(struct mce *m) return 1; } +EXPORT_SYMBOL_GPL(mce_usable_address); bool mce_is_memory_error(struct mce *m) { diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c index 7a51707f87e9..d6c1b10f6c25 100644 --- a/drivers/acpi/nfit/mce.c +++ b/drivers/acpi/nfit/mce.c @@ -29,6 +29,10 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val, if (!mce_is_memory_error(mce) || mce_is_correctable(mce)) return NOTIFY_DONE; + /* Verify the address reported in the MCE is valid. */ + if (!mce_usable_address(mce)) + return NOTIFY_DONE; + /* * mce->addr contains the physical addr accessed that caused the * machine check. We need to walk through the list of NFITs, and see -- cgit v1.2.3-58-ga151 From 042cb56478152b31c50bea8a784fc826891eb38e Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Mon, 5 Nov 2018 14:35:40 -0800 Subject: net: phy: Allow BCM54616S PHY to setup internal TX/RX clock delay This patch allows users to enable/disable internal TX and/or RX clock delay for BCM54616S PHYs so as to satisfy RGMII timing specifications. On a particular platform, whether TX and/or RX clock delay is required depends on how PHY connected to the MAC IP. This requirement can be specified through "phy-mode" property in the platform device tree. The patch is inspired by commit 733336262b28 ("net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay"). Signed-off-by: Tao Ren Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index e86ea105c802..704537010453 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -92,7 +92,7 @@ static int bcm54612e_config_init(struct phy_device *phydev) return 0; } -static int bcm5481x_config(struct phy_device *phydev) +static int bcm54xx_config_clock_delay(struct phy_device *phydev) { int rc, val; @@ -429,7 +429,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev) ret = genphy_config_aneg(phydev); /* Then we can set up the delay. */ - bcm5481x_config(phydev); + bcm54xx_config_clock_delay(phydev); if (of_property_read_bool(np, "enet-phy-lane-swap")) { /* Lane Swap - Undocumented register...magic! */ @@ -442,6 +442,19 @@ static int bcm5481_config_aneg(struct phy_device *phydev) return ret; } +static int bcm54616s_config_aneg(struct phy_device *phydev) +{ + int ret; + + /* Aneg firsly. */ + ret = genphy_config_aneg(phydev); + + /* Then we can set up the delay. */ + bcm54xx_config_clock_delay(phydev); + + return ret; +} + static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set) { int val; @@ -636,6 +649,7 @@ static struct phy_driver broadcom_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, + .config_aneg = bcm54616s_config_aneg, .ack_interrupt = bcm_phy_ack_intr, .config_intr = bcm_phy_config_intr, }, { -- cgit v1.2.3-58-ga151 From 86a484bda787d542d4a968bd7742bcf844c8adb2 Mon Sep 17 00:00:00 2001 From: Leo Li Date: Tue, 30 Oct 2018 15:09:08 -0400 Subject: drm/amd: Update atom_smu_info_v3_3 structure Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by: Leo Li Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/atomfirmware.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h index d2e7c0fa96c2..8eb0bb241210 100644 --- a/drivers/gpu/drm/amd/include/atomfirmware.h +++ b/drivers/gpu/drm/amd/include/atomfirmware.h @@ -1325,7 +1325,7 @@ struct atom_smu_info_v3_3 { struct atom_common_table_header table_header; uint8_t smuip_min_ver; uint8_t smuip_max_ver; - uint8_t smu_rsd1; + uint8_t waflclk_ss_mode; uint8_t gpuclk_ss_mode; uint16_t sclk_ss_percentage; uint16_t sclk_ss_rate_10hz; @@ -1355,7 +1355,10 @@ struct atom_smu_info_v3_3 { uint32_t syspll3_1_vco_freq_10khz; uint32_t bootup_fclk_10khz; uint32_t bootup_waflclk_10khz; - uint32_t reserved[3]; + uint32_t smu_info_caps; + uint16_t waflclk_ss_percentage; // in unit of 0.001% + uint16_t smuinitoffset; + uint32_t reserved; }; /* -- cgit v1.2.3-58-ga151 From ce317dd9f809c8da9656c88761e30f0a82a8c2e6 Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Oct 2018 10:40:50 -0700 Subject: ice: Set carrier state and start/stop queues in rebuild Set the carrier state post rebuild by querying the link status. Also start/stop queues based on link status. Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_main.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 05993451147a..6d31ffb64940 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -3296,7 +3296,7 @@ static void ice_rebuild(struct ice_pf *pf) struct device *dev = &pf->pdev->dev; struct ice_hw *hw = &pf->hw; enum ice_status ret; - int err; + int err, i; if (test_bit(__ICE_DOWN, pf->state)) goto clear_recovery; @@ -3370,6 +3370,22 @@ static void ice_rebuild(struct ice_pf *pf) } ice_reset_all_vfs(pf, true); + + for (i = 0; i < pf->num_alloc_vsi; i++) { + bool link_up; + + if (!pf->vsi[i] || pf->vsi[i]->type != ICE_VSI_PF) + continue; + ice_get_link_status(pf->vsi[i]->port_info, &link_up); + if (link_up) { + netif_carrier_on(pf->vsi[i]->netdev); + netif_tx_wake_all_queues(pf->vsi[i]->netdev); + } else { + netif_carrier_off(pf->vsi[i]->netdev); + netif_tx_stop_all_queues(pf->vsi[i]->netdev); + } + } + /* if we get here, reset flow is successful */ clear_bit(__ICE_RESET_FAILED, pf->state); return; -- cgit v1.2.3-58-ga151 From afd9d4ab58db20029a75cf82f23b6a5641cd7d6f Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Oct 2018 10:40:51 -0700 Subject: ice: Check for reset in progress during remove The remove path does not currently check to see if a reset is in progress before proceeding. This can cause a resource collision resulting in various types of errors. Check for reset in progress and wait for a reasonable amount of time before allowing the remove to progress. Signed-off-by: Dave Ertman Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice.h | 2 ++ drivers/net/ethernet/intel/ice/ice_main.c | 6 ++++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 4c4b5717a627..e5b37fa60884 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -76,6 +76,8 @@ extern const char ice_drv_ver[]; #define ICE_MIN_INTR_PER_VF (ICE_MIN_QS_PER_VF + 1) #define ICE_DFLT_INTR_PER_VF (ICE_DFLT_QS_PER_VF + 1) +#define ICE_MAX_RESET_WAIT 20 + #define ICE_VSIQF_HKEY_ARRAY_SIZE ((VSIQF_HKEY_MAX_INDEX + 1) * 4) #define ICE_DFLT_NETIF_M (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 6d31ffb64940..aee22f11a41a 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -2182,6 +2182,12 @@ static void ice_remove(struct pci_dev *pdev) if (!pf) return; + for (i = 0; i < ICE_MAX_RESET_WAIT; i++) { + if (!ice_is_reset_in_progress(pf->state)) + break; + msleep(100); + } + set_bit(__ICE_DOWN, pf->state); ice_service_task_stop(pf); -- cgit v1.2.3-58-ga151 From 0f5d4c21a50716f8bd4e220544b82dca7408d113 Mon Sep 17 00:00:00 2001 From: Akeem G Abodunrin Date: Fri, 26 Oct 2018 10:40:52 -0700 Subject: ice: Fix dead device link issue with flow control Setting Rx or Tx pause parameter currently results in link loss on the interface, requiring the platform/host to be cold power cycled. Fix it. Signed-off-by: Akeem G Abodunrin Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_ethtool.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index 96923580f2a6..648acdb4c644 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -1517,10 +1517,15 @@ ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) } if (!test_bit(__ICE_DOWN, pf->state)) { - /* Give it a little more time to try to come back */ + /* Give it a little more time to try to come back. If still + * down, restart autoneg link or reinitialize the interface. + */ msleep(75); if (!test_bit(__ICE_DOWN, pf->state)) return ice_nway_reset(netdev); + + ice_down(vsi); + ice_up(vsi); } return err; -- cgit v1.2.3-58-ga151 From 33e055fcc26909b1d66b5d1f334aee38356068d7 Mon Sep 17 00:00:00 2001 From: Victor Raj Date: Fri, 26 Oct 2018 10:40:53 -0700 Subject: ice: Free VSI contexts during for unload In the unload path, all VSIs are freed. Also free the related VSI contexts to prevent memory leaks. Signed-off-by: Victor Raj Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_common.c | 3 +++ drivers/net/ethernet/intel/ice/ice_switch.c | 12 ++++++++++++ drivers/net/ethernet/intel/ice/ice_switch.h | 2 ++ 3 files changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index 8cd6a2401fd9..554fd707a6d6 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -811,6 +811,9 @@ void ice_deinit_hw(struct ice_hw *hw) /* Attempt to disable FW logging before shutting down control queues */ ice_cfg_fw_log(hw, false); ice_shutdown_all_ctrlq(hw); + + /* Clear VSI contexts if not already cleared */ + ice_clear_all_vsi_ctx(hw); } /** diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c index 33403f39f1b3..40c9c6558956 100644 --- a/drivers/net/ethernet/intel/ice/ice_switch.c +++ b/drivers/net/ethernet/intel/ice/ice_switch.c @@ -347,6 +347,18 @@ static void ice_clear_vsi_ctx(struct ice_hw *hw, u16 vsi_handle) } } +/** + * ice_clear_all_vsi_ctx - clear all the VSI context entries + * @hw: pointer to the hw struct + */ +void ice_clear_all_vsi_ctx(struct ice_hw *hw) +{ + u16 i; + + for (i = 0; i < ICE_MAX_VSI; i++) + ice_clear_vsi_ctx(hw, i); +} + /** * ice_add_vsi - add VSI context to the hardware and VSI handle list * @hw: pointer to the hw struct diff --git a/drivers/net/ethernet/intel/ice/ice_switch.h b/drivers/net/ethernet/intel/ice/ice_switch.h index b88d96a1ef69..d5ef0bd58bf9 100644 --- a/drivers/net/ethernet/intel/ice/ice_switch.h +++ b/drivers/net/ethernet/intel/ice/ice_switch.h @@ -190,6 +190,8 @@ ice_update_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx, struct ice_sq_cd *cd); bool ice_is_vsi_valid(struct ice_hw *hw, u16 vsi_handle); struct ice_vsi_ctx *ice_get_vsi_ctx(struct ice_hw *hw, u16 vsi_handle); +void ice_clear_all_vsi_ctx(struct ice_hw *hw); +/* Switch config */ enum ice_status ice_get_initial_sw_cfg(struct ice_hw *hw); /* Switch/bridge related commands */ -- cgit v1.2.3-58-ga151 From 9ecd25c26810a61b9c3abc6c73de32dca6da96e1 Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Oct 2018 10:40:54 -0700 Subject: ice: Remove duplicate addition of VLANs in replay path ice_restore_vlan and active_vlans were originally put in place to reprogram VLAN filters in the replay path. This is now done as part of the much broader VSI rebuild/replay framework. So remove both ice_restore_vlan and active_vlans Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice.h | 1 - drivers/net/ethernet/intel/ice/ice_main.c | 42 ++++-------------------- drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 -- 3 files changed, 6 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index e5b37fa60884..1639e955f158 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -191,7 +191,6 @@ struct ice_vsi { u64 tx_linearize; DECLARE_BITMAP(state, __ICE_STATE_NBITS); DECLARE_BITMAP(flags, ICE_VSI_FLAG_NBITS); - unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; unsigned int current_netdev_flags; u32 tx_restart; u32 tx_busy; diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index aee22f11a41a..338abb1b9233 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1622,7 +1622,6 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev, { struct ice_netdev_priv *np = netdev_priv(netdev); struct ice_vsi *vsi = np->vsi; - int ret; if (vid >= VLAN_N_VID) { netdev_err(netdev, "VLAN id requested %d is out of range %d\n", @@ -1635,7 +1634,8 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev, /* Enable VLAN pruning when VLAN 0 is added */ if (unlikely(!vid)) { - ret = ice_cfg_vlan_pruning(vsi, true); + int ret = ice_cfg_vlan_pruning(vsi, true); + if (ret) return ret; } @@ -1644,12 +1644,7 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev, * needed to continue allowing all untagged packets since VLAN prune * list is applied to all packets by the switch */ - ret = ice_vsi_add_vlan(vsi, vid); - - if (!ret) - set_bit(vid, vsi->active_vlans); - - return ret; + return ice_vsi_add_vlan(vsi, vid); } /** @@ -1677,8 +1672,6 @@ static int ice_vlan_rx_kill_vid(struct net_device *netdev, if (status) return status; - clear_bit(vid, vsi->active_vlans); - /* Disable VLAN pruning when VLAN 0 is removed */ if (unlikely(!vid)) status = ice_cfg_vlan_pruning(vsi, false); @@ -2515,31 +2508,6 @@ static int ice_vsi_vlan_setup(struct ice_vsi *vsi) return ret; } -/** - * ice_restore_vlan - Reinstate VLANs when vsi/netdev comes back up - * @vsi: the VSI being brought back up - */ -static int ice_restore_vlan(struct ice_vsi *vsi) -{ - int err; - u16 vid; - - if (!vsi->netdev) - return -EINVAL; - - err = ice_vsi_vlan_setup(vsi); - if (err) - return err; - - for_each_set_bit(vid, vsi->active_vlans, VLAN_N_VID) { - err = ice_vlan_rx_add_vid(vsi->netdev, htons(ETH_P_8021Q), vid); - if (err) - break; - } - - return err; -} - /** * ice_vsi_cfg - Setup the VSI * @vsi: the VSI being configured @@ -2552,7 +2520,9 @@ static int ice_vsi_cfg(struct ice_vsi *vsi) if (vsi->netdev) { ice_set_rx_mode(vsi->netdev); - err = ice_restore_vlan(vsi); + + err = ice_vsi_vlan_setup(vsi); + if (err) return err; } diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c index 45f10f8f01dc..9576b958622b 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c @@ -2171,7 +2171,6 @@ static int ice_vc_process_vlan_msg(struct ice_vf *vf, u8 *msg, bool add_v) if (!ice_vsi_add_vlan(vsi, vid)) { vf->num_vlan++; - set_bit(vid, vsi->active_vlans); /* Enable VLAN pruning when VLAN 0 is added */ if (unlikely(!vid)) @@ -2190,7 +2189,6 @@ static int ice_vc_process_vlan_msg(struct ice_vf *vf, u8 *msg, bool add_v) */ if (!ice_vsi_kill_vlan(vsi, vid)) { vf->num_vlan--; - clear_bit(vid, vsi->active_vlans); /* Disable VLAN pruning when removing VLAN 0 */ if (unlikely(!vid)) -- cgit v1.2.3-58-ga151 From 58297dd133f64ea028e7d52dd00cd9ff8aa4479f Mon Sep 17 00:00:00 2001 From: Md Fahad Iqbal Polash Date: Fri, 26 Oct 2018 10:40:55 -0700 Subject: ice: Fix flags for port VLAN According to the spec, whenever insert PVID field is set, the VLAN driver insertion mode should be set to 01b which isn't done currently. Fix it. Signed-off-by: Md Fahad Iqbal Polash Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c index 9576b958622b..e71065f9d391 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c @@ -348,7 +348,7 @@ static int ice_vsi_set_pvid(struct ice_vsi *vsi, u16 vid) struct ice_vsi_ctx ctxt = { 0 }; enum ice_status status; - ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_TAGGED | + ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_UNTAGGED | ICE_AQ_VSI_PVLAN_INSERT_PVID | ICE_AQ_VSI_VLAN_EMOD_STR; ctxt.info.pvid = cpu_to_le16(vid); -- cgit v1.2.3-58-ga151 From 31082519c11b01fe1fb6dd512055f252812c1508 Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Oct 2018 10:40:56 -0700 Subject: ice: Fix typo in error message Print should say "Enabling" instead of "Enaabling" Signed-off-by: Akeem G Abodunrin Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 5bacad01f0c9..c604a44c8cfb 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -1997,7 +1997,7 @@ int ice_cfg_vlan_pruning(struct ice_vsi *vsi, bool ena) status = ice_update_vsi(&vsi->back->hw, vsi->idx, ctxt, NULL); if (status) { netdev_err(vsi->netdev, "%sabling VLAN pruning on VSI handle: %d, VSI HW ID: %d failed, err = %d, aq_err = %d\n", - ena ? "Ena" : "Dis", vsi->idx, vsi->vsi_num, status, + ena ? "En" : "Dis", vsi->idx, vsi->vsi_num, status, vsi->back->hw.adminq.sq_last_status); goto err_out; } -- cgit v1.2.3-58-ga151 From 25525b69bb44a628841492f44a5a8e74f34724f4 Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Fri, 26 Oct 2018 10:40:57 -0700 Subject: ice: Fix napi delete calls for remove In the remove path, the vsi->netdev is being set to NULL before the call to free vectors. This is causing the netif_napi_del call to never be made. Add a call to ice_napi_del to the same location as the calls to unregister_netdev and just prior to them. This will use the reverse flow as the register and netif_napi_add calls. Signed-off-by: Dave Ertman Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice.h | 1 + drivers/net/ethernet/intel/ice/ice_lib.c | 1 + drivers/net/ethernet/intel/ice/ice_main.c | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 1639e955f158..b8548370f1c7 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -370,5 +370,6 @@ int ice_set_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size); int ice_get_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size); void ice_fill_rss_lut(u8 *lut, u16 rss_table_size, u16 rss_size); void ice_print_link_msg(struct ice_vsi *vsi, bool isup); +void ice_napi_del(struct ice_vsi *vsi); #endif /* _ICE_H_ */ diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index c604a44c8cfb..1041fa2a7767 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -2458,6 +2458,7 @@ int ice_vsi_release(struct ice_vsi *vsi) * on this wq */ if (vsi->netdev && !ice_is_reset_in_progress(pf->state)) { + ice_napi_del(vsi); unregister_netdev(vsi->netdev); free_netdev(vsi->netdev); vsi->netdev = NULL; diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 338abb1b9233..82f49dbd762c 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1465,7 +1465,7 @@ skip_req_irq: * ice_napi_del - Remove NAPI handler for the VSI * @vsi: VSI for which NAPI handler is to be removed */ -static void ice_napi_del(struct ice_vsi *vsi) +void ice_napi_del(struct ice_vsi *vsi) { int v_idx; -- cgit v1.2.3-58-ga151 From c585ea42ec75e8d3afa278b7095d9f0dd6ee515b Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Fri, 26 Oct 2018 10:40:58 -0700 Subject: ice: Fix tx_timeout in PF driver Prior to this commit the driver was running into tx_timeouts when a queue was stressed enough. This was happening because the HW tail and SW tail (NTU) were incorrectly out of sync. Consequently this was causing the HW head to collide with the HW tail, which to the hardware means that all descriptors posted for Tx have been processed. Due to the Tx logic used in the driver SW tail and HW tail are allowed to be out of sync. This is done as an optimization because it allows the driver to write HW tail as infrequently as possible, while still updating the SW tail index to keep track. However, there are situations where this results in the tail never getting updated, resulting in Tx timeouts. Tx HW tail write condition: if (netif_xmit_stopped(txring_txq(tx_ring) || !skb->xmit_more) writel(sw_tail, tx_ring->tail); An issue was found in the Tx logic that was causing the afore mentioned condition for updating HW tail to never happen, causing tx_timeouts. In ice_xmit_frame_ring we calculate how many descriptors we need for the Tx transaction based on the skb the kernel hands us. This is then passed into ice_maybe_stop_tx along with some extra padding to determine if we have enough descriptors available for this transaction. If we don't then we return -EBUSY to the stack, otherwise we move on and eventually prepare the Tx descriptors accordingly in ice_tx_map and set next_to_watch. In ice_tx_map we make another call to ice_maybe_stop_tx with a value of MAX_SKB_FRAGS + 4. The key here is that this value is possibly less than the value we sent in the first call to ice_maybe_stop_tx in ice_xmit_frame_ring. Now, if the number of unused descriptors is between MAX_SKB_FRAGS + 4 and the value used in the first call to ice_maybe_stop_tx in ice_xmit_frame_ring then we do not update the HW tail because of the "Tx HW tail write condition" above. This is because in ice_maybe_stop_tx we return success from ice_maybe_stop_tx instead of calling __ice_maybe_stop_tx and subsequently calling netif_stop_subqueue, which sets the __QUEUE_STATE_DEV_XOFF bit. This bit is then checked in the "Tx HW tail write condition" by calling netif_xmit_stopped and subsequently updating HW tail if the afore mentioned bit is set. In ice_clean_tx_irq, if next_to_watch is not NULL, we end up cleaning the descriptors that HW sets the DD bit on and we have the budget. The HW head will eventually run into the HW tail in response to the description in the paragraph above. The next time through ice_xmit_frame_ring we make the initial call to ice_maybe_stop_tx with another skb from the stack. This time we do not have enough descriptors available and we return NETDEV_TX_BUSY to the stack and end up setting next_to_watch to NULL. This is where we are stuck. In ice_clean_tx_irq we never clean anything because next_to_watch is always NULL and in ice_xmit_frame_ring we never update HW tail because we already return NETDEV_TX_BUSY to the stack and eventually we hit a tx_timeout. This issue was fixed by making sure that the second call to ice_maybe_stop_tx in ice_tx_map is passed a value that is >= the value that was used on the initial call to ice_maybe_stop_tx in ice_xmit_frame_ring. This was done by adding the following defines to make the logic more clear and to reduce the chance of mucking this up again: ICE_CACHE_LINE_BYTES 64 ICE_DESCS_PER_CACHE_LINE (ICE_CACHE_LINE_BYTES / \ sizeof(struct ice_tx_desc)) ICE_DESCS_FOR_CTX_DESC 1 ICE_DESCS_FOR_SKB_DATA_PTR 1 The ICE_CACHE_LINE_BYTES being 64 is an assumption being made so we don't have to figure this out on every pass through the Tx path. Instead I added a sanity check in ice_probe to verify cache line size and print a message if it's not 64 Bytes. This will make it easier to file issues if they are seen when the cache line size is not 64 Bytes when reading from the GLPCI_CNF2 register. Signed-off-by: Brett Creeley Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_hw_autogen.h | 2 ++ drivers/net/ethernet/intel/ice/ice_main.c | 18 ++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_txrx.c | 9 +++++---- drivers/net/ethernet/intel/ice/ice_txrx.h | 17 +++++++++++++++-- 4 files changed, 40 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h index 5fdea6ec7675..596b9fb1c510 100644 --- a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h +++ b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h @@ -242,6 +242,8 @@ #define GLNVM_ULD 0x000B6008 #define GLNVM_ULD_CORER_DONE_M BIT(3) #define GLNVM_ULD_GLOBR_DONE_M BIT(4) +#define GLPCI_CNF2 0x000BE004 +#define GLPCI_CNF2_CACHELINE_SIZE_M BIT(1) #define PF_FUNC_RID 0x0009E880 #define PF_FUNC_RID_FUNC_NUM_S 0 #define PF_FUNC_RID_FUNC_NUM_M ICE_M(0x7, 0) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 82f49dbd762c..333312a1d595 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1994,6 +1994,22 @@ static int ice_init_interrupt_scheme(struct ice_pf *pf) return 0; } +/** + * ice_verify_cacheline_size - verify driver's assumption of 64 Byte cache lines + * @pf: pointer to the PF structure + * + * There is no error returned here because the driver should be able to handle + * 128 Byte cache lines, so we only print a warning in case issues are seen, + * specifically with Tx. + */ +static void ice_verify_cacheline_size(struct ice_pf *pf) +{ + if (rd32(&pf->hw, GLPCI_CNF2) & GLPCI_CNF2_CACHELINE_SIZE_M) + dev_warn(&pf->pdev->dev, + "%d Byte cache line assumption is invalid, driver may have Tx timeouts!\n", + ICE_CACHE_LINE_BYTES); +} + /** * ice_probe - Device initialization routine * @pdev: PCI device information struct @@ -2144,6 +2160,8 @@ static int ice_probe(struct pci_dev *pdev, /* since everything is good, start the service timer */ mod_timer(&pf->serv_tmr, round_jiffies(jiffies + pf->serv_tmr_period)); + ice_verify_cacheline_size(pf); + return 0; err_alloc_sw_unroll: diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index 5dae968d853e..3387c67c848d 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -1556,15 +1556,15 @@ int ice_tso(struct ice_tx_buf *first, struct ice_tx_offload_params *off) * magnitude greater than our largest possible GSO size. * * This would then be implemented as: - * return (((size >> 12) * 85) >> 8) + 1; + * return (((size >> 12) * 85) >> 8) + ICE_DESCS_FOR_SKB_DATA_PTR; * * Since multiplication and division are commutative, we can reorder * operations into: - * return ((size * 85) >> 20) + 1; + * return ((size * 85) >> 20) + ICE_DESCS_FOR_SKB_DATA_PTR; */ static unsigned int ice_txd_use_count(unsigned int size) { - return ((size * 85) >> 20) + 1; + return ((size * 85) >> 20) + ICE_DESCS_FOR_SKB_DATA_PTR; } /** @@ -1706,7 +1706,8 @@ ice_xmit_frame_ring(struct sk_buff *skb, struct ice_ring *tx_ring) * + 1 desc for context descriptor, * otherwise try next time */ - if (ice_maybe_stop_tx(tx_ring, count + 4 + 1)) { + if (ice_maybe_stop_tx(tx_ring, count + ICE_DESCS_PER_CACHE_LINE + + ICE_DESCS_FOR_CTX_DESC)) { tx_ring->tx_stats.tx_busy++; return NETDEV_TX_BUSY; } diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h index 1d0f58bd389b..75d0eaf6c9dd 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.h +++ b/drivers/net/ethernet/intel/ice/ice_txrx.h @@ -22,8 +22,21 @@ #define ICE_RX_BUF_WRITE 16 /* Must be power of 2 */ #define ICE_MAX_TXQ_PER_TXQG 128 -/* Tx Descriptors needed, worst case */ -#define DESC_NEEDED (MAX_SKB_FRAGS + 4) +/* We are assuming that the cache line is always 64 Bytes here for ice. + * In order to make sure that is a correct assumption there is a check in probe + * to print a warning if the read from GLPCI_CNF2 tells us that the cache line + * size is 128 bytes. We do it this way because we do not want to read the + * GLPCI_CNF2 register or a variable containing the value on every pass through + * the Tx path. + */ +#define ICE_CACHE_LINE_BYTES 64 +#define ICE_DESCS_PER_CACHE_LINE (ICE_CACHE_LINE_BYTES / \ + sizeof(struct ice_tx_desc)) +#define ICE_DESCS_FOR_CTX_DESC 1 +#define ICE_DESCS_FOR_SKB_DATA_PTR 1 +/* Tx descriptors needed, worst case */ +#define DESC_NEEDED (MAX_SKB_FRAGS + ICE_DESCS_FOR_CTX_DESC + \ + ICE_DESCS_PER_CACHE_LINE + ICE_DESCS_FOR_SKB_DATA_PTR) #define ICE_DESC_UNUSED(R) \ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ (R)->next_to_clean - (R)->next_to_use - 1) -- cgit v1.2.3-58-ga151 From d944b46992f8e99b6bdc721e44b02e5ca294fa2b Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Fri, 26 Oct 2018 10:40:59 -0700 Subject: ice: Fix the bytecount sent to netdev_tx_sent_queue Currently if the driver does a TSO offload the bytecount sent to netdev_tx_sent_queue will be incorrect. This is because in ice_tso we overwrite the initial value that we set in ice_tx_map. This creates a mismatch between the Tx and Tx clean flow. In the Tx clean flow we calculate the bytecount (called total_bytes) as we clean the descriptors so the value used in the Tx clean path is correct. Fix this by using += in ice_tso instead of =. This fixes the mismatch in bytecount mentioned above. Signed-off-by: Brett Creeley Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index 3387c67c848d..fe5bbabbb41e 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -1520,7 +1520,7 @@ int ice_tso(struct ice_tx_buf *first, struct ice_tx_offload_params *off) /* update gso_segs and bytecount */ first->gso_segs = skb_shinfo(skb)->gso_segs; - first->bytecount = (first->gso_segs - 1) * off->header_len; + first->bytecount += (first->gso_segs - 1) * off->header_len; cd_tso_len = skb->len - off->header_len; cd_mss = skb_shinfo(skb)->gso_size; -- cgit v1.2.3-58-ga151 From 4c9b658eeaefedd402a59e858d8ac3bfdf6153e3 Mon Sep 17 00:00:00 2001 From: Miroslav Lichvar Date: Fri, 26 Oct 2018 19:13:00 +0200 Subject: igb: shorten maximum PHC timecounter update interval The timecounter needs to be updated at least once per ~550 seconds in order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old timestamp. Since commit 500462a9de65 ("timers: Switch to a non-cascading wheel"), scheduling of delayed work seems to be less accurate and a requested delay of 540 seconds may actually be longer than 550 seconds. Also, the PHC may be adjusted to run up to 6% faster than real time and the system clock up to 10% slower. Shorten the delay to 360 seconds to be sure the timecounter is updated in time. This fixes an issue with HW timestamps on 82580/I350/I354 being off by ~1100 seconds for few seconds every ~9 minutes. Cc: Thomas Gleixner Signed-off-by: Miroslav Lichvar Acked-by: Jacob Keller Acked-by: Richard Cochran Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ptp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 29ced6b74d36..2b95dc9c7a6a 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -53,13 +53,15 @@ * 2^40 * 10^-9 / 60 = 18.3 minutes. * * SYSTIM is converted to real time using a timecounter. As - * timecounter_cyc2time() allows old timestamps, the timecounter - * needs to be updated at least once per half of the SYSTIM interval. - * Scheduling of delayed work is not very accurate, so we aim for 8 - * minutes to be sure the actual interval is shorter than 9.16 minutes. + * timecounter_cyc2time() allows old timestamps, the timecounter needs + * to be updated at least once per half of the SYSTIM interval. + * Scheduling of delayed work is not very accurate, and also the NIC + * clock can be adjusted to run up to 6% faster and the system clock + * up to 10% slower, so we aim for 6 minutes to be sure the actual + * interval in the NIC time is shorter than 9.16 minutes. */ -#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 8) +#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 6) #define IGB_PTP_TX_TIMEOUT (HZ * 15) #define INCPERIOD_82576 BIT(E1000_TIMINCA_16NS_SHIFT) #define INCVALUE_82576_MASK GENMASK(E1000_TIMINCA_16NS_SHIFT - 1, 0) -- cgit v1.2.3-58-ga151 From 63088da9472854408ae5d7c47bd011daf9e1a81b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 16:06:32 -0500 Subject: Revert "drm/amd/display: set backlight level limit to 1" This reverts commit 0cafc82fae41531b0162150f9a97f2c74f97118f. This breaks some apps that assume 0 is minimum brightness. Revert for 4.20. This is fixed properly for drm-next/4.21 in: "drm/amd: Don't fail on backlight = 0" However, that patch depends on more extensive changes to the backlight interface which are too invasive for -fixes. Fixes: Bugzilla: https://bugs.freedesktop.org/108668 Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index b0df6dc9a775..e224f23e2215 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1524,13 +1524,6 @@ static int amdgpu_dm_backlight_update_status(struct backlight_device *bd) { struct amdgpu_display_manager *dm = bl_get_data(bd); - /* - * PWM interperts 0 as 100% rather than 0% because of HW - * limitation for level 0.So limiting minimum brightness level - * to 1. - */ - if (bd->props.brightness < 1) - return 1; if (dc_link_set_backlight_level(dm->backlight_link, bd->props.brightness, 0, 0)) return 0; -- cgit v1.2.3-58-ga151 From 8ed4ec32d5b1f04a641978322a38a8d7089553bb Mon Sep 17 00:00:00 2001 From: Shaokun Zhang Date: Mon, 5 Nov 2018 18:33:35 +0800 Subject: drm/amd/display: Fix misleading buffer information RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu Cc: Dmytro Laktyushkin Signed-off-by: Shaokun Zhang Reviewed-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index fb04a4ad141f..5da2186b3615 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -1722,7 +1722,7 @@ static void write_i2c_retimer_setting( i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer)); RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ - offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n", + offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", slave_address, buffer[0], buffer[1], i2c_success?1:0); if (!i2c_success) /* Write failure */ @@ -1734,7 +1734,7 @@ static void write_i2c_retimer_setting( i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer)); RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ - offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n", + offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", slave_address, buffer[0], buffer[1], i2c_success?1:0); if (!i2c_success) /* Write failure */ -- cgit v1.2.3-58-ga151 From 02680efbb10be0d2c867fe722ae23d588f6bebef Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Sun, 7 Oct 2018 10:01:23 -0400 Subject: drm/amd/display: Stop leaking planes [Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index e224f23e2215..289ddd52cac4 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3301,7 +3301,7 @@ void dm_drm_plane_destroy_state(struct drm_plane *plane, static const struct drm_plane_funcs dm_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane, - .destroy = drm_plane_cleanup, + .destroy = drm_primary_helper_destroy, .reset = dm_drm_plane_reset, .atomic_duplicate_state = dm_drm_plane_duplicate_state, .atomic_destroy_state = dm_drm_plane_destroy_state, -- cgit v1.2.3-58-ga151 From 3426d66d3e74ab0ab264a85e0795a17e3dde1e71 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 11:19:00 -0500 Subject: drm/amdgpu/vega20: add CLK base offset In case we need to access CLK registers. Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c b/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c index 2d4473557b0d..d13fc4fcb517 100644 --- a/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c +++ b/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c @@ -49,6 +49,7 @@ int vega20_reg_base_init(struct amdgpu_device *adev) adev->reg_offset[SMUIO_HWIP][i] = (uint32_t *)(&(SMUIO_BASE.instance[i])); adev->reg_offset[NBIF_HWIP][i] = (uint32_t *)(&(NBIO_BASE.instance[i])); adev->reg_offset[THM_HWIP][i] = (uint32_t *)(&(THM_BASE.instance[i])); + adev->reg_offset[CLK_HWIP][i] = (uint32_t *)(&(CLK_BASE.instance[i])); } return 0; } -- cgit v1.2.3-58-ga151 From 689e7b34234e29e5168894b27b752a4e16ef08c4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 2 Nov 2018 10:51:50 -0500 Subject: drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2) The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index b75ede5f84f7..b459867a05b2 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1736,7 +1736,12 @@ static void set_static_screen_control(struct pipe_ctx **pipe_ctx, if (events->force_trigger) value |= 0x1; - value |= 0x84; + if (num_pipes) { + struct dc *dc = pipe_ctx[0]->stream->ctx->dc; + + if (dc->fbc_compressor) + value |= 0x84; + } for (i = 0; i < num_pipes; i++) pipe_ctx[i]->stream_res.tg->funcs-> -- cgit v1.2.3-58-ga151 From 7875a22625aa7f11befba84bd1e669201032947d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 14:44:29 -0500 Subject: drm/amdgpu: add DC feature mask module parameter Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 11 +++++++++++ drivers/gpu/drm/amd/include/amd_shared.h | 4 ++++ 3 files changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index d0102cfc8efb..104b2e0d893b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -151,6 +151,7 @@ extern int amdgpu_compute_multipipe; extern int amdgpu_gpu_recovery; extern int amdgpu_emu_mode; extern uint amdgpu_smu_memory_pool_size; +extern uint amdgpu_dc_feature_mask; extern struct amdgpu_mgpu_info mgpu_info; #ifdef CONFIG_DRM_AMDGPU_SI diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 943dbf3c5da1..8de55f7f1a3a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -127,6 +127,9 @@ int amdgpu_compute_multipipe = -1; int amdgpu_gpu_recovery = -1; /* auto */ int amdgpu_emu_mode = 0; uint amdgpu_smu_memory_pool_size = 0; +/* FBC (bit 0) disabled by default*/ +uint amdgpu_dc_feature_mask = 0; + struct amdgpu_mgpu_info mgpu_info = { .mutex = __MUTEX_INITIALIZER(mgpu_info.mutex), }; @@ -631,6 +634,14 @@ module_param(halt_if_hws_hang, int, 0644); MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (default), 1 = on)"); #endif +/** + * DOC: dcfeaturemask (uint) + * Override display features enabled. See enum DC_FEATURE_MASK in drivers/gpu/drm/amd/include/amd_shared.h. + * The default is the current set of stable display features. + */ +MODULE_PARM_DESC(dcfeaturemask, "all stable DC features enabled (default))"); +module_param_named(dcfeaturemask, amdgpu_dc_feature_mask, uint, 0444); + static const struct pci_device_id pciidlist[] = { #ifdef CONFIG_DRM_AMDGPU_SI {0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI}, diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h index 2083c308007c..470d7b89071a 100644 --- a/drivers/gpu/drm/amd/include/amd_shared.h +++ b/drivers/gpu/drm/amd/include/amd_shared.h @@ -133,6 +133,10 @@ enum PP_FEATURE_MASK { PP_AVFS_MASK = 0x40000, }; +enum DC_FEATURE_MASK { + DC_FBC_MASK = 0x1, +}; + /** * struct amd_ip_funcs - general hooks for managing amdgpu IP Blocks */ -- cgit v1.2.3-58-ga151 From ce2127c462d9d1c0832f088b23158420e87e71a0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 15:10:37 -0500 Subject: drm/amdgpu/display/dc: add FBC to dc_config Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 199527171100..b57fa61b3034 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -169,6 +169,7 @@ struct link_training_settings; struct dc_config { bool gpu_vm_support; bool disable_disp_pll_sharing; + bool fbc_support; }; enum visual_confirm { -- cgit v1.2.3-58-ga151 From 04b94af4e348acc52546b9b19c933575f26589a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 15:19:49 -0500 Subject: drm/amdgpu/display/dm: handle FBC dc feature parameter Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 289ddd52cac4..d3f5cb1795bf 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -429,6 +429,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) adev->asic_type < CHIP_RAVEN) init_data.flags.gpu_vm_support = true; + if (amdgpu_dc_feature_mask & DC_FBC_MASK) + init_data.flags.fbc_support = true; + /* Display Core create. */ adev->dm.dc = dc_create(&init_data); -- cgit v1.2.3-58-ga151 From 5822e9539dc11721b53d74accd4c091b982011d0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 2 Nov 2018 10:54:27 -0500 Subject: drm/amdgpu/display/dce11: only enable FBC when selected Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c index e3624ca24574..7c9fd9052ee2 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c @@ -1362,7 +1362,8 @@ static bool construct( pool->base.sw_i2cs[i] = NULL; } - dc->fbc_compressor = dce110_compressor_create(ctx); + if (dc->config.fbc_support) + dc->fbc_compressor = dce110_compressor_create(ctx); if (!underlay_create(ctx, &pool->base)) goto res_create_fail; -- cgit v1.2.3-58-ga151 From ffe498237b36ee42624e139b21efa05da4ff1f48 Mon Sep 17 00:00:00 2001 From: Chinh T Cao Date: Mon, 5 Nov 2018 12:18:35 -0800 Subject: ice: Change req_speeds to be u16 Since the req_speeds field in struct ice_link_status is a u8, req_speeds & ICE_AQ_LINK_SPEED_40GB always returns 0. This was caught by a coverity scan. Fix this by changing req_speeds to be u16. Reported-by: Bruce Allan Signed-off-by: Chinh T Cao Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_type.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h index 12f9432abf11..f4dbc81c1988 100644 --- a/drivers/net/ethernet/intel/ice/ice_type.h +++ b/drivers/net/ethernet/intel/ice/ice_type.h @@ -92,12 +92,12 @@ struct ice_link_status { u64 phy_type_low; u16 max_frame_size; u16 link_speed; + u16 req_speeds; u8 lse_ena; /* Link Status Event notification */ u8 link_info; u8 an_info; u8 ext_info; u8 pacing; - u8 req_speeds; /* Refer to #define from module_type[ICE_MODULE_TYPE_TOTAL_BYTE] of * ice_aqc_get_phy_caps structure */ -- cgit v1.2.3-58-ga151 From ba766b8b99c30ad3c55ed8cf224d1185ecff1476 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 29 Oct 2018 10:52:42 -0700 Subject: i40e: restore NETIF_F_GSO_IPXIP[46] to netdev features Since commit bacd75cfac8a ("i40e/i40evf: Add capability exchange for outer checksum", 2017-04-06) the i40e driver has not reported support for IP-in-IP offloads. This likely occurred due to a bad rebase, as the commit extracts hw_enc_features into its own variable. As part of this change, it dropped the NETIF_F_FSO_IPXIP flags from the netdev->hw_enc_features. This was unfortunately not caught during code review. Fix this by adding back the missing feature flags. For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318daa4a ("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20), replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT. NETIF_F_GSO_IPXIP6 was added in commit bf2d1df39502 ("intel: Add support for IPv6 IP-in-IP offload", 2016-05-20). Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index bc71a21c1dc2..3ff5ee49818b 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -12249,6 +12249,8 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | NETIF_F_GSO_PARTIAL | + NETIF_F_GSO_IPXIP4 | + NETIF_F_GSO_IPXIP6 | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_SCTP_CRC | -- cgit v1.2.3-58-ga151 From d5596fd46770550873ab4c02bcb69f83d3d63f63 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 29 Oct 2018 10:52:43 -0700 Subject: i40e: enable NETIF_F_NTUPLE and NETIF_F_HW_TC at driver load The assignment of the feature flag NETIF_F_NTUPLE and NETIF_F_HW_TC occurs prior to the initial setup of the local hw_features variable. This means the features are set as user-changeable, but are not set in the currently active feature list. This results in the features being disabled at the driver's initial load. Move the assignment after the initial assignment of hw_features, and assign to the local variable. This ensures that NETIF_F_NTUPLE and NETIF_F_HW_TC are marked as user-changeable, and also enables them by default when the driver loads. Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 3ff5ee49818b..21c2688d6308 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -12268,13 +12268,13 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) /* record features VLANs can make use of */ netdev->vlan_features |= hw_enc_features | NETIF_F_TSO_MANGLEID; - if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) - netdev->hw_features |= NETIF_F_NTUPLE | NETIF_F_HW_TC; - hw_features = hw_enc_features | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; + if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) + hw_features |= NETIF_F_NTUPLE | NETIF_F_HW_TC; + netdev->hw_features |= hw_features; netdev->features |= hw_features | NETIF_F_HW_VLAN_CTAG_FILTER; -- cgit v1.2.3-58-ga151 From 3a40cfe8ba3abba57af2c7e26aad2c6dd1681864 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Wed, 7 Nov 2018 13:42:58 +0800 Subject: leds: trigger: Fix sleeping function called from invalid context We will meet below issue due to mutex_lock() is called in interrupt context. The mutex lock is used to protect the pattern trigger data, but before changing new pattern trigger data (pattern values or repeat value) by users, we always cancel the timer firstly to clear previous patterns' performance. That means there is no race in pattern_trig_timer_function(), so we can drop the mutex lock in pattern_trig_timer_function() to avoid this issue. Moreover we can move the timer cancelling into mutex protection, since there is no deadlock risk if we remove the mutex lock in pattern_trig_timer_function(). BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.20.0-rc1-koelsch-00841-ga338c8181013c1a9 #171 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x7c/0x9c) [] (dump_stack) from [] (___might_sleep+0xf4/0x158) [] (___might_sleep) from [] (mutex_lock+0x18/0x60) [] (mutex_lock) from [] (pattern_trig_timer_function+0x1c/0x11c) [] (pattern_trig_timer_function) from [] (call_timer_fn+0x1c/0x90) [] (call_timer_fn) from [] (expire_timers+0x94/0xa4) [] (expire_timers) from [] (run_timer_softirq+0x108/0x15c) [] (run_timer_softirq) from [] (__do_softirq+0x1d4/0x258) [] (__do_softirq) from [] (irq_exit+0x64/0xc4) [] (irq_exit) from [] (__handle_domain_irq+0x80/0xb4) [] (__handle_domain_irq) from [] (gic_handle_irq+0x58/0x90) [] (gic_handle_irq) from [] (__irq_svc+0x58/0x74) Exception stack(0xeb483f60 to 0xeb483fa8) 3f60: 00000000 00000000 eb9afaa0 c0217e80 00000000 ffffe000 00000000 c0e06408 3f80: 00000002 c0e0647c c0c6a5f0 00000000 c0e04900 eb483fb0 c0207ea8 c0207e98 3fa0: 60020013 ffffffff [] (__irq_svc) from [] (arch_cpu_idle+0x1c/0x38) [] (arch_cpu_idle) from [] (do_idle+0x138/0x268) [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [] (cpu_startup_entry) from [<402022ec>] (0x402022ec) Fixes: 5fd752b6b3a2 ("leds: core: Introduce LED pattern trigger") Signed-off-by: Baolin Wang Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: Jacek Anaszewski --- drivers/leds/trigger/ledtrig-pattern.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c index 174a298f1be0..1870cf87afe1 100644 --- a/drivers/leds/trigger/ledtrig-pattern.c +++ b/drivers/leds/trigger/ledtrig-pattern.c @@ -75,8 +75,6 @@ static void pattern_trig_timer_function(struct timer_list *t) { struct pattern_trig_data *data = from_timer(data, t, timer); - mutex_lock(&data->lock); - for (;;) { if (!data->is_indefinite && !data->repeat) break; @@ -117,8 +115,6 @@ static void pattern_trig_timer_function(struct timer_list *t) break; } - - mutex_unlock(&data->lock); } static int pattern_trig_start_pattern(struct led_classdev *led_cdev) @@ -177,14 +173,10 @@ static ssize_t repeat_store(struct device *dev, struct device_attribute *attr, if (res < -1 || res == 0) return -EINVAL; - /* - * Clear previous patterns' performence firstly, and remove the timer - * without mutex lock to avoid dead lock. - */ - del_timer_sync(&data->timer); - mutex_lock(&data->lock); + del_timer_sync(&data->timer); + if (data->is_hw_pattern) led_cdev->pattern_clear(led_cdev); @@ -235,14 +227,10 @@ static ssize_t pattern_trig_store_patterns(struct led_classdev *led_cdev, struct pattern_trig_data *data = led_cdev->trigger_data; int ccount, cr, offset = 0, err = 0; - /* - * Clear previous patterns' performence firstly, and remove the timer - * without mutex lock to avoid dead lock. - */ - del_timer_sync(&data->timer); - mutex_lock(&data->lock); + del_timer_sync(&data->timer); + if (data->is_hw_pattern) led_cdev->pattern_clear(led_cdev); -- cgit v1.2.3-58-ga151 From 3c7eda0b65ad279dd2f26908d2f4bd088da93996 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Wed, 24 Oct 2018 12:11:35 +0800 Subject: drm/amd/powerplay: set a default fclk/gfxclk ratio Otherwise big gap between these two clocks may causes some hangs. Signed-off-by: Evan Quan Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 16 ++++++++++++++++ drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h | 1 + drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h | 3 ++- 3 files changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 57143d51e3ee..8bf76108cf39 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -120,6 +120,7 @@ static void vega20_set_default_registry_data(struct pp_hwmgr *hwmgr) data->registry_data.disable_auto_wattman = 1; data->registry_data.auto_wattman_debug = 0; data->registry_data.auto_wattman_sample_period = 100; + data->registry_data.fclk_gfxclk_ratio = 0x3F6CCCCD; data->registry_data.auto_wattman_threshold = 50; data->registry_data.gfxoff_controlled_by_driver = 1; data->gfxoff_allowed = false; @@ -829,6 +830,16 @@ static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr) return 0; } +static int vega20_send_clock_ratio(struct pp_hwmgr *hwmgr) +{ + struct vega20_hwmgr *data = + (struct vega20_hwmgr *)(hwmgr->backend); + + return smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_SetFclkGfxClkRatio, + data->registry_data.fclk_gfxclk_ratio); +} + static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr) { struct vega20_hwmgr *data = @@ -1532,6 +1543,11 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr) "[EnableDPMTasks] Failed to enable all smu features!", return result); + result = vega20_send_clock_ratio(hwmgr); + PP_ASSERT_WITH_CODE(!result, + "[EnableDPMTasks] Failed to send clock ratio!", + return result); + /* Initialize UVD/VCE powergating state */ vega20_init_powergate_state(hwmgr); diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h index 56fe6a0d42e8..25faaa5c5b10 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h @@ -328,6 +328,7 @@ struct vega20_registry_data { uint8_t disable_auto_wattman; uint32_t auto_wattman_debug; uint32_t auto_wattman_sample_period; + uint32_t fclk_gfxclk_ratio; uint8_t auto_wattman_threshold; uint8_t log_avfs_param; uint8_t enable_enginess; diff --git a/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h index 45d64a81e945..4f63a736ea0e 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h +++ b/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h @@ -105,7 +105,8 @@ #define PPSMC_MSG_SetSystemVirtualDramAddrHigh 0x4B #define PPSMC_MSG_SetSystemVirtualDramAddrLow 0x4C #define PPSMC_MSG_WaflTest 0x4D -// Unused ID 0x4E to 0x50 +#define PPSMC_MSG_SetFclkGfxClkRatio 0x4E +// Unused ID 0x4F to 0x50 #define PPSMC_MSG_AllowGfxOff 0x51 #define PPSMC_MSG_DisallowGfxOff 0x52 #define PPSMC_MSG_GetPptLimit 0x53 -- cgit v1.2.3-58-ga151 From 108110a3ffa3483d743f3bff93917ba64dc8edd0 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Wed, 7 Nov 2018 09:16:07 +0800 Subject: drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled With UCLK DPM enabled, slow switching is not supported any more. Signed-off-by: Evan Quan Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 37 ++++++++++------------ 1 file changed, 17 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 8bf76108cf39..99861f32b1f9 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -830,6 +830,18 @@ static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr) return 0; } +static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr) +{ + struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend); + + if (data->smu_features[GNLD_DPM_UCLK].enabled) + return smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_SetUclkFastSwitch, + 1); + + return 0; +} + static int vega20_send_clock_ratio(struct pp_hwmgr *hwmgr) { struct vega20_hwmgr *data = @@ -1543,6 +1555,11 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr) "[EnableDPMTasks] Failed to enable all smu features!", return result); + result = vega20_notify_smc_display_change(hwmgr); + PP_ASSERT_WITH_CODE(!result, + "[EnableDPMTasks] Failed to notify smc display change!", + return result); + result = vega20_send_clock_ratio(hwmgr); PP_ASSERT_WITH_CODE(!result, "[EnableDPMTasks] Failed to send clock ratio!", @@ -1988,19 +2005,6 @@ static int vega20_read_sensor(struct pp_hwmgr *hwmgr, int idx, return ret; } -static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr, - bool has_disp) -{ - struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend); - - if (data->smu_features[GNLD_DPM_UCLK].enabled) - return smum_send_msg_to_smc_with_parameter(hwmgr, - PPSMC_MSG_SetUclkFastSwitch, - has_disp ? 1 : 0); - - return 0; -} - int vega20_display_clock_voltage_request(struct pp_hwmgr *hwmgr, struct pp_display_clock_request *clock_req) { @@ -2060,13 +2064,6 @@ static int vega20_notify_smc_display_config_after_ps_adjustment( struct pp_display_clock_request clock_req; int ret = 0; - if ((hwmgr->display_config->num_display > 1) && - !hwmgr->display_config->multi_monitor_in_sync && - !hwmgr->display_config->nb_pstate_switch_disable) - vega20_notify_smc_display_change(hwmgr, false); - else - vega20_notify_smc_display_change(hwmgr, true); - min_clocks.dcefClock = hwmgr->display_config->min_dcef_set_clk; min_clocks.dcefClockInSR = hwmgr->display_config->min_dcef_deep_sleep_set_clk; min_clocks.memoryClock = hwmgr->display_config->min_mem_set_clock; -- cgit v1.2.3-58-ga151 From 8be17ac95f8451b51f636622d8d4b8674334f468 Mon Sep 17 00:00:00 2001 From: "Jerry (Fangzhi) Zuo" Date: Tue, 30 Oct 2018 14:28:49 -0400 Subject: drm/amd/display: Cleanup MST non-atomic code workaround [why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo Reviewed-by: Harry Wentland Reviewed-by: Lyude Paul Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 15 +++------- .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 34 ---------------------- .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.h | 1 - 3 files changed, 4 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index d3f5cb1795bf..c1262f62cd9f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2703,18 +2703,11 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, drm_connector = &aconnector->base; if (!aconnector->dc_sink) { - /* - * Create dc_sink when necessary to MST - * Don't apply fake_sink to MST - */ - if (aconnector->mst_port) { - dm_dp_mst_dc_sink_create(drm_connector); - return stream; + if (!aconnector->mst_port) { + sink = create_fake_sink(aconnector); + if (!sink) + return stream; } - - sink = create_fake_sink(aconnector); - if (!sink) - return stream; } else { sink = aconnector->dc_sink; } diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 03601d717fed..03e98967d6c2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -205,40 +205,6 @@ static const struct drm_connector_funcs dm_dp_mst_connector_funcs = { .atomic_get_property = amdgpu_dm_connector_atomic_get_property }; -void dm_dp_mst_dc_sink_create(struct drm_connector *connector) -{ - struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); - struct dc_sink *dc_sink; - struct dc_sink_init_data init_params = { - .link = aconnector->dc_link, - .sink_signal = SIGNAL_TYPE_DISPLAY_PORT_MST }; - - /* FIXME none of this is safe. we shouldn't touch aconnector here in - * atomic_check - */ - - /* - * TODO: Need to further figure out why ddc.algo is NULL while MST port exists - */ - if (!aconnector->port || !aconnector->port->aux.ddc.algo) - return; - - ASSERT(aconnector->edid); - - dc_sink = dc_link_add_remote_sink( - aconnector->dc_link, - (uint8_t *)aconnector->edid, - (aconnector->edid->extensions + 1) * EDID_LENGTH, - &init_params); - - dc_sink->priv = aconnector; - aconnector->dc_sink = dc_sink; - - if (aconnector->dc_sink) - amdgpu_dm_update_freesync_caps( - connector, aconnector->edid); -} - static int dm_dp_mst_get_modes(struct drm_connector *connector) { struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h index 8cf51da26657..2da851b40042 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h @@ -31,6 +31,5 @@ struct amdgpu_dm_connector; void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm, struct amdgpu_dm_connector *aconnector); -void dm_dp_mst_dc_sink_create(struct drm_connector *connector); #endif -- cgit v1.2.3-58-ga151 From 0e6613e46fed29316f33acf86e1d1568288638b5 Mon Sep 17 00:00:00 2001 From: "Jerry (Fangzhi) Zuo" Date: Tue, 30 Oct 2018 14:37:16 -0400 Subject: drm/amd/display: Drop reusing drm connector for MST [why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo Reviewed-by: Harry Wentland Reviewed-by: Lyude Paul Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 2 -- .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 40 ++++------------------ 2 files changed, 7 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h index 978b34a5011c..924a38a1fc44 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h @@ -160,8 +160,6 @@ struct amdgpu_dm_connector { struct mutex hpd_lock; bool fake_enable; - - bool mst_connected; }; #define to_amdgpu_dm_connector(x) container_of(x, struct amdgpu_dm_connector, base) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 03e98967d6c2..31126eb23a74 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -320,25 +320,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, struct amdgpu_device *adev = dev->dev_private; struct amdgpu_dm_connector *aconnector; struct drm_connector *connector; - struct drm_connector_list_iter conn_iter; - - drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { - aconnector = to_amdgpu_dm_connector(connector); - if (aconnector->mst_port == master - && !aconnector->port) { - DRM_INFO("DM_MST: reusing connector: %p [id: %d] [master: %p]\n", - aconnector, connector->base.id, aconnector->mst_port); - - aconnector->port = port; - drm_connector_set_path_property(connector, pathprop); - - drm_connector_list_iter_end(&conn_iter); - aconnector->mst_connected = true; - return &aconnector->base; - } - } - drm_connector_list_iter_end(&conn_iter); aconnector = kzalloc(sizeof(*aconnector), GFP_KERNEL); if (!aconnector) @@ -387,8 +368,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, */ amdgpu_dm_connector_funcs_reset(connector); - aconnector->mst_connected = true; - DRM_INFO("DM_MST: added connector: %p [id: %d] [master: %p]\n", aconnector, connector->base.id, aconnector->mst_port); @@ -400,6 +379,9 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr, struct drm_connector *connector) { + struct amdgpu_dm_connector *master = container_of(mgr, struct amdgpu_dm_connector, mst_mgr); + struct drm_device *dev = master->base.dev; + struct amdgpu_device *adev = dev->dev_private; struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); DRM_INFO("DM_MST: Disabling connector: %p [id: %d] [master: %p]\n", @@ -413,7 +395,10 @@ static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr, aconnector->dc_sink = NULL; } - aconnector->mst_connected = false; + drm_connector_unregister(connector); + if (adev->mode_info.rfbdev) + drm_fb_helper_remove_one_connector(&adev->mode_info.rfbdev->helper, connector); + drm_connector_put(connector); } static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr) @@ -424,18 +409,10 @@ static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr) drm_kms_helper_hotplug_event(dev); } -static void dm_dp_mst_link_status_reset(struct drm_connector *connector) -{ - mutex_lock(&connector->dev->mode_config.mutex); - drm_connector_set_link_status_property(connector, DRM_MODE_LINK_STATUS_BAD); - mutex_unlock(&connector->dev->mode_config.mutex); -} - static void dm_dp_mst_register_connector(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct amdgpu_device *adev = dev->dev_private; - struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); if (adev->mode_info.rfbdev) drm_fb_helper_add_one_connector(&adev->mode_info.rfbdev->helper, connector); @@ -443,9 +420,6 @@ static void dm_dp_mst_register_connector(struct drm_connector *connector) DRM_ERROR("adev->mode_info.rfbdev is NULL\n"); drm_connector_register(connector); - - if (aconnector->mst_connected) - dm_dp_mst_link_status_reset(connector); } static const struct drm_dp_mst_topology_cbs dm_mst_cbs = { -- cgit v1.2.3-58-ga151 From 63237f8748bdf46dccf79ef8f98f05e9fe799162 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 1 Nov 2018 21:51:49 -0400 Subject: drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder() [why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 31126eb23a74..d02c32a1039c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -285,12 +285,7 @@ dm_dp_create_fake_mst_encoder(struct amdgpu_dm_connector *connector) struct amdgpu_device *adev = dev->dev_private; struct amdgpu_encoder *amdgpu_encoder; struct drm_encoder *encoder; - const struct drm_connector_helper_funcs *connector_funcs = - connector->base.helper_private; - struct drm_encoder *enc_master = - connector_funcs->best_encoder(&connector->base); - DRM_DEBUG_KMS("enc master is %p\n", enc_master); amdgpu_encoder = kzalloc(sizeof(*amdgpu_encoder), GFP_KERNEL); if (!amdgpu_encoder) return NULL; -- cgit v1.2.3-58-ga151 From 96ed82cc1f515a2329f93506129ab1de35429b89 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 7 Nov 2018 12:06:52 +0000 Subject: FDDI: defza: Fix SPDX annotation The SPDX annotation for this driver does not match the license text, which specifies GNU GPL 2 or later. Make the two match by correcting the SPDX tag. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defza.c | 2 +- drivers/net/fddi/defza.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/fddi/defza.c b/drivers/net/fddi/defza.c index 3b7f10a5f06a..79980eeb0e43 100644 --- a/drivers/net/fddi/defza.c +++ b/drivers/net/fddi/defza.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ /* FDDI network adapter driver for DEC FDDIcontroller 700/700-C devices. * * Copyright (c) 2018 Maciej W. Rozycki diff --git a/drivers/net/fddi/defza.h b/drivers/net/fddi/defza.h index b06acf32738e..ed659ed17215 100644 --- a/drivers/net/fddi/defza.h +++ b/drivers/net/fddi/defza.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0+ */ /* FDDI network adapter driver for DEC FDDIcontroller 700/700-C devices. * * Copyright (c) 2018 Maciej W. Rozycki -- cgit v1.2.3-58-ga151 From 5f5fae37dbcf37feae48c40d2580dbd67c5df131 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 7 Nov 2018 12:06:59 +0000 Subject: FDDI: defza: Add missing comment closing Fix: drivers/net/fddi/defza.h:238:1: warning: "/*" within comment [-Wcomment] by adding a missing comment closing. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defza.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/fddi/defza.h b/drivers/net/fddi/defza.h index ed659ed17215..93bda61be8e3 100644 --- a/drivers/net/fddi/defza.h +++ b/drivers/net/fddi/defza.h @@ -235,6 +235,7 @@ struct fza_ring_cmd { #define FZA_RING_CMD 0x200400 /* command ring address */ #define FZA_RING_CMD_SIZE 0x40 /* command descriptor ring * size + */ /* Command constants. */ #define FZA_RING_CMD_MASK 0x7fffffff #define FZA_RING_CMD_NOP 0x00000000 /* nop */ -- cgit v1.2.3-58-ga151 From 04453b6b241913f85af013eec187bab776428af5 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 7 Nov 2018 12:07:05 +0000 Subject: FDDI: defza: Move SMT Tx data buffer declaration next to its skb Move the temporary data buffer used when tapping into the SMT Tx queue from the outer function level into the conditional block it's actually used in and its containing skb is also declared, making the structure of code better. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defza.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/fddi/defza.c b/drivers/net/fddi/defza.c index 79980eeb0e43..bebd0d6d2320 100644 --- a/drivers/net/fddi/defza.c +++ b/drivers/net/fddi/defza.c @@ -784,7 +784,7 @@ err_rx: static void fza_tx_smt(struct net_device *dev) { struct fza_private *fp = netdev_priv(dev); - struct fza_buffer_tx __iomem *smt_tx_ptr, *skb_data_ptr; + struct fza_buffer_tx __iomem *smt_tx_ptr; int i, len; u32 own; @@ -799,6 +799,7 @@ static void fza_tx_smt(struct net_device *dev) if (!netif_queue_stopped(dev)) { if (dev_nit_active(dev)) { + struct fza_buffer_tx *skb_data_ptr; struct sk_buff *skb; /* Length must be a multiple of 4 as only word -- cgit v1.2.3-58-ga151 From 8f5365ebf7b17c35dddbb694b4f0ffd1293a947f Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 7 Nov 2018 12:07:10 +0000 Subject: FDDI: defza: Make the driver version string constant The driver version string is obviously not meant to be changed at run time, so mark it `const'. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defza.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/fddi/defza.c b/drivers/net/fddi/defza.c index bebd0d6d2320..c5cae8e74dc4 100644 --- a/drivers/net/fddi/defza.c +++ b/drivers/net/fddi/defza.c @@ -56,7 +56,7 @@ #define DRV_VERSION "v.1.1.4" #define DRV_RELDATE "Oct 6 2018" -static char version[] = +static const char version[] = DRV_NAME ": " DRV_VERSION " " DRV_RELDATE " Maciej W. Rozycki\n"; MODULE_AUTHOR("Maciej W. Rozycki "); -- cgit v1.2.3-58-ga151 From e84b47941e15e6666afb8ee8b21d1c3fc1a013af Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Wed, 7 Nov 2018 17:50:52 +0100 Subject: ibmvnic: fix accelerated VLAN handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Don't request tag insertion when it isn't present in outgoing skb. Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 7893beffcc71..c9d5d0a7fbf1 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1545,7 +1545,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) tx_crq.v1.sge_len = cpu_to_be32(skb->len); tx_crq.v1.ioba = cpu_to_be64(data_dma_addr); - if (adapter->vlan_header_insertion) { + if (adapter->vlan_header_insertion && skb_vlan_tag_present(skb)) { tx_crq.v1.flags2 |= IBMVNIC_TX_VLAN_INSERT; tx_crq.v1.vlan_id = cpu_to_be16(skb->vlan_tci); } -- cgit v1.2.3-58-ga151 From b25ddb00bc1b96613edcb525f19203a7d1405fce Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Wed, 7 Nov 2018 17:50:53 +0100 Subject: qlcnic: remove assumption that vlan_tci != 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit VLAN.TCI == 0 is perfectly valid (802.1p), so allow it to be accelerated. Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 9647578cbe6a..14f26bf3b388 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -459,7 +459,7 @@ static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter, struct cmd_desc_type0 *first_desc, struct sk_buff *skb, struct qlcnic_host_tx_ring *tx_ring) { - u8 l4proto, opcode = 0, hdr_len = 0; + u8 l4proto, opcode = 0, hdr_len = 0, tag_vlan = 0; u16 flags = 0, vlan_tci = 0; int copied, offset, copy_len, size; struct cmd_desc_type0 *hwdesc; @@ -472,14 +472,16 @@ static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter, flags = QLCNIC_FLAGS_VLAN_TAGGED; vlan_tci = ntohs(vh->h_vlan_TCI); protocol = ntohs(vh->h_vlan_encapsulated_proto); + tag_vlan = 1; } else if (skb_vlan_tag_present(skb)) { flags = QLCNIC_FLAGS_VLAN_OOB; vlan_tci = skb_vlan_tag_get(skb); + tag_vlan = 1; } if (unlikely(adapter->tx_pvid)) { - if (vlan_tci && !(adapter->flags & QLCNIC_TAGGING_ENABLED)) + if (tag_vlan && !(adapter->flags & QLCNIC_TAGGING_ENABLED)) return -EIO; - if (vlan_tci && (adapter->flags & QLCNIC_TAGGING_ENABLED)) + if (tag_vlan && (adapter->flags & QLCNIC_TAGGING_ENABLED)) goto set_flags; flags = QLCNIC_FLAGS_VLAN_OOB; -- cgit v1.2.3-58-ga151 From 943210ba807ec50aafa2fa7b13bd6d36a478969b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 23 Oct 2018 11:28:28 -0400 Subject: vt: fix broken display when running aptitude If you run aptitude on framebuffer console, the display is corrupted. The corruption is caused by the commit d8ae7242. The patch adds "offset" to "start" when calling scr_memsetw, but it forgets to do the same addition on a subsequent call to do_update_region. Signed-off-by: Mikulas Patocka Fixes: d8ae72427187 ("vt: preserve unicode values corresponding to screen characters") Reviewed-by: Nicolas Pitre Cc: stable@vger.kernel.org # 4.19 Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 5f1183b0b89d..476ec4b1b86c 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1551,7 +1551,7 @@ static void csi_K(struct vc_data *vc, int vpar) scr_memsetw(start + offset, vc->vc_video_erase_char, 2 * count); vc->vc_need_wrap = 0; if (con_should_update(vc)) - do_update_region(vc, (unsigned long) start, count); + do_update_region(vc, (unsigned long)(start + offset), count); } static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar positions */ -- cgit v1.2.3-58-ga151 From 991a25194097006ec1e0d2e0814ff920e59e3465 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 22 Oct 2018 09:19:04 -0700 Subject: termios, tty/tty_baudrate.c: fix buffer overrun On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does not do any limit checking on the tty_baudrate[] array, and in fact a buffer overrun is possible on both architectures. Add a limit check to prevent that situation. This will be followed by a much bigger cleanup/simplification patch. Signed-off-by: H. Peter Anvin (Intel) Requested-by: Cc: Johan Hovold Cc: Jiri Slaby Cc: Al Viro Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Cc: Eugene Syromiatnikov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_baudrate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index 7576ceace571..f438eaa68246 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -77,7 +77,7 @@ speed_t tty_termios_baud_rate(struct ktermios *termios) else cbaud += 15; } - return baud_table[cbaud]; + return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; } EXPORT_SYMBOL(tty_termios_baud_rate); @@ -113,7 +113,7 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios) else cbaud += 15; } - return baud_table[cbaud]; + return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; #else /* IBSHIFT */ return tty_termios_baud_rate(termios); #endif /* IBSHIFT */ -- cgit v1.2.3-58-ga151 From bb39ba6a8deab70752b836a36c62205b1c65b559 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 8 Nov 2018 06:34:34 +0000 Subject: sata_rcar: convert to SPDX identifiers This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto Signed-off-by: Jens Axboe --- drivers/ata/sata_rcar.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 10ecb232245d..4b1ff5bc256a 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Renesas R-Car SATA driver * * Author: Vladimir Barinov * Copyright (C) 2013-2015 Cogent Embedded, Inc. * Copyright (C) 2013-2015 Renesas Solutions Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include -- cgit v1.2.3-58-ga151 From e2576c8bdfd462c34b8a46c0084e7c30b0851bf4 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Tue, 6 Nov 2018 00:08:20 +0100 Subject: clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems with reboot; e.g. a ~60 second delay between issuing reboot and the board power cycling (and in some OS configurations reboot will fail and require manual power cycling). Similar to 'commit c987ac6f1f088663b6dad39281071aeb31d450a8 ("clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4 Co-Processor seems to depend on FCLK_DIV3 being operational. Until commit 05f814402d6174369b3b29832cbb5eb5ed287059 ("clk: meson: add fdiv clock gates"), this clock was modeled and left on by the bootloader. We don't have precise documentation about the SCPI Co-Processor and its clock requirement so we are learning things the hard way. Marking this clock as critical solves the problem but it should not be viewed as final solution. Ideally, the SCPI driver should claim these clocks. We also depends on some clock hand-off mechanism making its way to CCF, to make sure the clock stays on between its registration and the SCPI driver probe. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Christian Hewitt Signed-off-by: Jerome Brunet Signed-off-by: Stephen Boyd --- drivers/clk/meson/gxbb.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 9309cfaaa464..4ada9668fd49 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -506,6 +506,18 @@ static struct clk_regmap gxbb_fclk_div3 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div3_div" }, .num_parents = 1, + /* + * FIXME: + * This clock, as fdiv2, is used by the SCPI FW and is required + * by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) The SCPI generic driver claims and enable all the clocks + * it needs + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, }, }; -- cgit v1.2.3-58-ga151 From d6ee1e7e9004d3d246cdfa14196989e0a9466c16 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 8 Nov 2018 10:31:23 +0100 Subject: clk: meson: axg: mark fdiv2 and fdiv3 as critical Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor uses the fdiv2 and fdiv3 to, among other things, provide the cpu clock. Until clock hand-off mechanism makes its way to CCF and the generic SCPI claims platform specific clocks, these clocks must be marked as critical to make sure they are never disabled when needed by the co-processor. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Stephen Boyd --- drivers/clk/meson/axg.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c index c981159b02c0..792735d7e46e 100644 --- a/drivers/clk/meson/axg.c +++ b/drivers/clk/meson/axg.c @@ -325,6 +325,7 @@ static struct clk_regmap axg_fclk_div2 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div2_div" }, .num_parents = 1, + .flags = CLK_IS_CRITICAL, }, }; @@ -349,6 +350,18 @@ static struct clk_regmap axg_fclk_div3 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div3_div" }, .num_parents = 1, + /* + * FIXME: + * This clock, as fdiv2, is used by the SCPI FW and is required + * by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) The SCPI generic driver claims and enable all the clocks + * it needs + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, }, }; -- cgit v1.2.3-58-ga151 From 6778be4e520959659b27a441c06a84c9cb009085 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 7 Nov 2018 16:30:32 +0000 Subject: of/device: Really only set bus DMA mask when appropriate of_dma_configure() was *supposed* to be following the same logic as acpi_dma_configure() and only setting bus_dma_mask if some range was specified by the firmware. However, it seems that subtlety got lost in the process of fitting it into the differently-shaped control flow, and as a result the force_dma==true case ends up always setting the bus mask to the 32-bit default, which is not what anyone wants. Make sure we only touch it if the DT actually said so. Fixes: 6c2fb2ea7636 ("of/device: Set bus DMA mask as appropriate") Reported-by: Aaro Koskinen Reported-by: Jean-Philippe Brucker Tested-by: Aaro Koskinen Tested-by: John Stultz Tested-by: Geert Uytterhoeven Tested-by: Robert Richter Signed-off-by: Robin Murphy Signed-off-by: Rob Herring --- drivers/of/device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/device.c b/drivers/of/device.c index 84e810421418..258742830e36 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -149,9 +149,11 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma) * set by the driver. */ mask = DMA_BIT_MASK(ilog2(dma_addr + size - 1) + 1); - dev->bus_dma_mask = mask; dev->coherent_dma_mask &= mask; *dev->dma_mask &= mask; + /* ...but only set bus mask if we found valid dma-ranges earlier */ + if (!ret) + dev->bus_dma_mask = mask; coherent = of_dma_is_coherent(np); dev_dbg(dev, "device is%sdma coherent\n", -- cgit v1.2.3-58-ga151 From 89c38422e072bb453e3045b8f1b962a344c3edea Mon Sep 17 00:00:00 2001 From: John Garry Date: Thu, 8 Nov 2018 18:17:03 +0800 Subject: of, numa: Validate some distance map rules Currently the NUMA distance map parsing does not validate the distance table for the distance-matrix rules 1-2 in [1]. However the arch NUMA code may enforce some of these rules, but not all. Such is the case for the arm64 port, which does not enforce the rule that the distance between separates nodes cannot equal LOCAL_DISTANCE. The patch adds the following rules validation: - distance of node to self equals LOCAL_DISTANCE - distance of separate nodes > LOCAL_DISTANCE This change avoids a yet-unresolved crash reported in [2]. A note on dealing with symmetrical distances between nodes: Validating symmetrical distances between nodes is difficult. If it were mandated in the bindings that every distance must be recorded in the table, then it would be easy. However, it isn't. In addition to this, it is also possible to record [b, a] distance only (and not [a, b]). So, when processing the table for [b, a], we cannot assert that current distance of [a, b] != [b, a] as invalid, as [a, b] distance may not be present in the table and current distance would be default at REMOTE_DISTANCE. As such, we maintain the policy that we overwrite distance [a, b] = [b, a] for b > a. This policy is different to kernel ACPI SLIT validation, which allows non-symmetrical distances (ACPI spec SLIT rules allow it). However, the distance debug message is dropped as it may be misleading (for a distance which is later overwritten). Some final notes on semantics: - It is implied that it is the responsibility of the arch NUMA code to reset the NUMA distance map for an error in distance map parsing. - It is the responsibility of the FW NUMA topology parsing (whether OF or ACPI) to enforce NUMA distance rules, and not arch NUMA code. [1] Documents/devicetree/bindings/numa.txt [2] https://www.spinics.net/lists/arm-kernel/msg683304.html Cc: stable@vger.kernel.org # 4.7 Signed-off-by: John Garry Acked-by: Will Deacon Signed-off-by: Rob Herring --- drivers/of/of_numa.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/of/of_numa.c b/drivers/of/of_numa.c index 35c64a4295e0..fe6b13608e51 100644 --- a/drivers/of/of_numa.c +++ b/drivers/of/of_numa.c @@ -104,9 +104,14 @@ static int __init of_numa_parse_distance_map_v1(struct device_node *map) distance = of_read_number(matrix, 1); matrix++; + if ((nodea == nodeb && distance != LOCAL_DISTANCE) || + (nodea != nodeb && distance <= LOCAL_DISTANCE)) { + pr_err("Invalid distance[node%d -> node%d] = %d\n", + nodea, nodeb, distance); + return -EINVAL; + } + numa_set_distance(nodea, nodeb, distance); - pr_debug("distance[node%d -> node%d] = %d\n", - nodea, nodeb, distance); /* Set default distance of node B->A same as A->B */ if (nodeb > nodea) -- cgit v1.2.3-58-ga151 From e12c225258f2584906765234ca6db4ad4c618192 Mon Sep 17 00:00:00 2001 From: Huazhong Tan Date: Thu, 8 Nov 2018 10:13:19 +0800 Subject: net: hns3: bugfix for not checking return value hns3_reset_notify_init_enet() only return error early if the return value of hns3_restore_vlan() is not 0. This patch adds checking for the return value of hns3_restore_vlan. Fixes: 7fa6be4fd2f6 ("net: hns3: fix incorrect return value/type of some functions") Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 3f96aa30068e..20fcf0d1c2ce 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -3760,7 +3760,8 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle) /* Hardware table is only clear when pf resets */ if (!(handle->flags & HNAE3_SUPPORT_VF)) { ret = hns3_restore_vlan(netdev); - return ret; + if (ret) + return ret; } ret = hns3_restore_fd_rules(netdev); -- cgit v1.2.3-58-ga151 From 39477551df940ddb1339203817de04f5caaacf7a Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Thu, 8 Nov 2018 16:46:08 +0200 Subject: qed: Fix memory/entry leak in qed_init_sp_request() Free the allocated SPQ entry or return the acquired SPQ entry to the free list in error flows. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_sp_commands.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c index 77b6248ad3b9..e86a1ea23613 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c @@ -80,7 +80,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn, case QED_SPQ_MODE_BLOCK: if (!p_data->p_comp_data) - return -EINVAL; + goto err; p_ent->comp_cb.cookie = p_data->p_comp_data->cookie; break; @@ -95,7 +95,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn, default: DP_NOTICE(p_hwfn, "Unknown SPQE completion mode %d\n", p_ent->comp_mode); - return -EINVAL; + goto err; } DP_VERBOSE(p_hwfn, QED_MSG_SPQ, @@ -109,6 +109,18 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn, memset(&p_ent->ramrod, 0, sizeof(p_ent->ramrod)); return 0; + +err: + /* qed_spq_get_entry() can either get an entry from the free_pool, + * or, if no entries are left, allocate a new entry and add it to + * the unlimited_pending list. + */ + if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending) + kfree(p_ent); + else + qed_spq_return_entry(p_hwfn, p_ent); + + return -EINVAL; } static enum tunnel_clss qed_tunn_clss_to_fw_clss(u8 type) -- cgit v1.2.3-58-ga151 From 2632f22ebd08da249c2017962a199a0cfb2324bf Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Thu, 8 Nov 2018 16:46:09 +0200 Subject: qed: Fix blocking/unlimited SPQ entries leak When there are no SPQ entries left in the free_pool, new entries are allocated and are added to the unlimited list. When an entry in the pool is available, the content is copied from the original entry, and the new entry is sent to the device. qed_spq_post() is not aware of that, so the additional entry is stored in the original entry as p_post_ent, which can later be returned to the pool. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_sp.h | 3 ++ drivers/net/ethernet/qlogic/qed/qed_spq.c | 57 ++++++++++++++++--------------- 2 files changed, 33 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h index e95431f6acd4..04259df8a5c2 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h @@ -167,6 +167,9 @@ struct qed_spq_entry { enum spq_mode comp_mode; struct qed_spq_comp_cb comp_cb; struct qed_spq_comp_done comp_done; /* SPQ_MODE_EBLOCK */ + + /* Posted entry for unlimited list entry in EBLOCK mode */ + struct qed_spq_entry *post_ent; }; struct qed_eq { diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index c4a6274dd625..c1a81ec0524b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -685,6 +685,8 @@ static int qed_spq_add_entry(struct qed_hwfn *p_hwfn, /* EBLOCK responsible to free the allocated p_ent */ if (p_ent->comp_mode != QED_SPQ_MODE_EBLOCK) kfree(p_ent); + else + p_ent->post_ent = p_en2; p_ent = p_en2; } @@ -767,6 +769,25 @@ static int qed_spq_pend_post(struct qed_hwfn *p_hwfn) SPQ_HIGH_PRI_RESERVE_DEFAULT); } +/* Avoid overriding of SPQ entries when getting out-of-order completions, by + * marking the completions in a bitmap and increasing the chain consumer only + * for the first successive completed entries. + */ +static void qed_spq_comp_bmap_update(struct qed_hwfn *p_hwfn, __le16 echo) +{ + u16 pos = le16_to_cpu(echo) % SPQ_RING_SIZE; + struct qed_spq *p_spq = p_hwfn->p_spq; + + __set_bit(pos, p_spq->p_comp_bitmap); + while (test_bit(p_spq->comp_bitmap_idx, + p_spq->p_comp_bitmap)) { + __clear_bit(p_spq->comp_bitmap_idx, + p_spq->p_comp_bitmap); + p_spq->comp_bitmap_idx++; + qed_chain_return_produced(&p_spq->chain); + } +} + int qed_spq_post(struct qed_hwfn *p_hwfn, struct qed_spq_entry *p_ent, u8 *fw_return_code) { @@ -824,11 +845,12 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, p_ent->queue == &p_spq->unlimited_pending); if (p_ent->queue == &p_spq->unlimited_pending) { - /* This is an allocated p_ent which does not need to - * return to pool. - */ + struct qed_spq_entry *p_post_ent = p_ent->post_ent; + kfree(p_ent); - return rc; + + /* Return the entry which was actually posted */ + p_ent = p_post_ent; } if (rc) @@ -842,7 +864,7 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, spq_post_fail2: spin_lock_bh(&p_spq->lock); list_del(&p_ent->list); - qed_chain_return_produced(&p_spq->chain); + qed_spq_comp_bmap_update(p_hwfn, p_ent->elem.hdr.echo); spq_post_fail: /* return to the free pool */ @@ -874,25 +896,8 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, spin_lock_bh(&p_spq->lock); list_for_each_entry_safe(p_ent, tmp, &p_spq->completion_pending, list) { if (p_ent->elem.hdr.echo == echo) { - u16 pos = le16_to_cpu(echo) % SPQ_RING_SIZE; - list_del(&p_ent->list); - - /* Avoid overriding of SPQ entries when getting - * out-of-order completions, by marking the completions - * in a bitmap and increasing the chain consumer only - * for the first successive completed entries. - */ - __set_bit(pos, p_spq->p_comp_bitmap); - - while (test_bit(p_spq->comp_bitmap_idx, - p_spq->p_comp_bitmap)) { - __clear_bit(p_spq->comp_bitmap_idx, - p_spq->p_comp_bitmap); - p_spq->comp_bitmap_idx++; - qed_chain_return_produced(&p_spq->chain); - } - + qed_spq_comp_bmap_update(p_hwfn, echo); p_spq->comp_count++; found = p_ent; break; @@ -931,11 +936,9 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, QED_MSG_SPQ, "Got a completion without a callback function\n"); - if ((found->comp_mode != QED_SPQ_MODE_EBLOCK) || - (found->queue == &p_spq->unlimited_pending)) + if (found->comp_mode != QED_SPQ_MODE_EBLOCK) /* EBLOCK is responsible for returning its own entry into the - * free list, unless it originally added the entry into the - * unlimited pending list. + * free list. */ qed_spq_return_entry(p_hwfn, found); -- cgit v1.2.3-58-ga151 From fb5e7438e7a3c8966e04ccb0760170e9e06f3699 Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Thu, 8 Nov 2018 16:46:10 +0200 Subject: qed: Fix SPQ entries not returned to pool in error flows qed_sp_destroy_request() API was added for SPQ users that need to free/return the entry they acquired in their error flows. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_fcoe.c | 11 ++++++++--- drivers/net/ethernet/qlogic/qed/qed_iscsi.c | 1 + drivers/net/ethernet/qlogic/qed/qed_l2.c | 12 ++++++++---- drivers/net/ethernet/qlogic/qed/qed_rdma.c | 1 + drivers/net/ethernet/qlogic/qed/qed_roce.c | 1 + drivers/net/ethernet/qlogic/qed/qed_sp.h | 11 +++++++++++ drivers/net/ethernet/qlogic/qed/qed_sp_commands.c | 22 ++++++++++++++-------- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 1 + 8 files changed, 45 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_fcoe.c b/drivers/net/ethernet/qlogic/qed/qed_fcoe.c index cc1b373c0ace..46dc93d3b9b5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_fcoe.c +++ b/drivers/net/ethernet/qlogic/qed/qed_fcoe.c @@ -147,7 +147,8 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn, "Cannot satisfy CQ amount. CQs requested %d, CQs available %d. Aborting function start\n", fcoe_pf_params->num_cqs, p_hwfn->hw_info.feat_num[QED_FCOE_CQ]); - return -EINVAL; + rc = -EINVAL; + goto err; } p_data->mtu = cpu_to_le16(fcoe_pf_params->mtu); @@ -156,14 +157,14 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn, rc = qed_cxt_acquire_cid(p_hwfn, PROTOCOLID_FCOE, &dummy_cid); if (rc) - return rc; + goto err; cxt_info.iid = dummy_cid; rc = qed_cxt_get_cid_info(p_hwfn, &cxt_info); if (rc) { DP_NOTICE(p_hwfn, "Cannot find context info for dummy cid=%d\n", dummy_cid); - return rc; + goto err; } p_cxt = cxt_info.p_cxt; SET_FIELD(p_cxt->tstorm_ag_context.flags3, @@ -240,6 +241,10 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn, rc = qed_spq_post(p_hwfn, p_ent, NULL); return rc; + +err: + qed_sp_destroy_request(p_hwfn, p_ent); + return rc; } static int diff --git a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c index 1135387bd99d..4f8a685d1a55 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c +++ b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c @@ -200,6 +200,7 @@ qed_sp_iscsi_func_start(struct qed_hwfn *p_hwfn, "Cannot satisfy CQ amount. Queues requested %d, CQs available %d. Aborting function start\n", p_params->num_queues, p_hwfn->hw_info.feat_num[QED_ISCSI_CQ]); + qed_sp_destroy_request(p_hwfn, p_ent); return -EINVAL; } diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 82a1bd1f8a8c..67c02ea93906 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -740,8 +740,7 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn, rc = qed_sp_vport_update_rss(p_hwfn, p_ramrod, p_rss_params); if (rc) { - /* Return spq entry which is taken in qed_sp_init_request()*/ - qed_spq_return_entry(p_hwfn, p_ent); + qed_sp_destroy_request(p_hwfn, p_ent); return rc; } @@ -1355,6 +1354,7 @@ qed_filter_ucast_common(struct qed_hwfn *p_hwfn, DP_NOTICE(p_hwfn, "%d is not supported yet\n", p_filter_cmd->opcode); + qed_sp_destroy_request(p_hwfn, *pp_ent); return -EINVAL; } @@ -2056,13 +2056,13 @@ qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn, } else { rc = qed_fw_vport(p_hwfn, p_params->vport_id, &abs_vport_id); if (rc) - return rc; + goto err; if (p_params->qid != QED_RFS_NTUPLE_QID_RSS) { rc = qed_fw_l2_queue(p_hwfn, p_params->qid, &abs_rx_q_id); if (rc) - return rc; + goto err; p_ramrod->rx_qid_valid = 1; p_ramrod->rx_qid = cpu_to_le16(abs_rx_q_id); @@ -2083,6 +2083,10 @@ qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn, (u64)p_params->addr, p_params->length); return qed_spq_post(p_hwfn, p_ent, NULL); + +err: + qed_sp_destroy_request(p_hwfn, p_ent); + return rc; } int qed_get_rxq_coalesce(struct qed_hwfn *p_hwfn, diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c index c71391b9c757..62113438c880 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c @@ -1514,6 +1514,7 @@ qed_rdma_register_tid(void *rdma_cxt, default: rc = -EINVAL; DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "rc = %d\n", rc); + qed_sp_destroy_request(p_hwfn, p_ent); return rc; } SET_FIELD(p_ramrod->flags1, diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c index f9167d1354bb..e49fada85410 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_roce.c +++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c @@ -745,6 +745,7 @@ static int qed_roce_sp_destroy_qp_responder(struct qed_hwfn *p_hwfn, DP_NOTICE(p_hwfn, "qed destroy responder failed: cannot allocate memory (ramrod). rc = %d\n", rc); + qed_sp_destroy_request(p_hwfn, p_ent); return rc; } diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h index 04259df8a5c2..3157c0d99441 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h @@ -399,6 +399,17 @@ struct qed_sp_init_data { struct qed_spq_comp_cb *p_comp_data; }; +/** + * @brief Returns a SPQ entry to the pool / frees the entry if allocated. + * Should be called on in error flows after initializing the SPQ entry + * and before posting it. + * + * @param p_hwfn + * @param p_ent + */ +void qed_sp_destroy_request(struct qed_hwfn *p_hwfn, + struct qed_spq_entry *p_ent); + int qed_sp_init_request(struct qed_hwfn *p_hwfn, struct qed_spq_entry **pp_ent, u8 cmd, diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c index e86a1ea23613..888274fa208b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c @@ -47,6 +47,19 @@ #include "qed_sp.h" #include "qed_sriov.h" +void qed_sp_destroy_request(struct qed_hwfn *p_hwfn, + struct qed_spq_entry *p_ent) +{ + /* qed_spq_get_entry() can either get an entry from the free_pool, + * or, if no entries are left, allocate a new entry and add it to + * the unlimited_pending list. + */ + if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending) + kfree(p_ent); + else + qed_spq_return_entry(p_hwfn, p_ent); +} + int qed_sp_init_request(struct qed_hwfn *p_hwfn, struct qed_spq_entry **pp_ent, u8 cmd, u8 protocol, struct qed_sp_init_data *p_data) @@ -111,14 +124,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn, return 0; err: - /* qed_spq_get_entry() can either get an entry from the free_pool, - * or, if no entries are left, allocate a new entry and add it to - * the unlimited_pending list. - */ - if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending) - kfree(p_ent); - else - qed_spq_return_entry(p_hwfn, p_ent); + qed_sp_destroy_request(p_hwfn, p_ent); return -EINVAL; } diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index 9b08a9d9e151..ca6290fa0f30 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -101,6 +101,7 @@ static int qed_sp_vf_start(struct qed_hwfn *p_hwfn, struct qed_vf_info *p_vf) default: DP_NOTICE(p_hwfn, "Unknown VF personality %d\n", p_hwfn->hw_info.personality); + qed_sp_destroy_request(p_hwfn, p_ent); return -EINVAL; } -- cgit v1.2.3-58-ga151 From fa5c448d98f0df660bfcad3dd5facc027ef84cd3 Mon Sep 17 00:00:00 2001 From: Sagiv Ozeri Date: Thu, 8 Nov 2018 16:46:11 +0200 Subject: qed: Fix potential memory corruption A stuck ramrod should be deleted from the completion_pending list, otherwise it will be added again in the future and corrupt the list. Return error value to inform that ramrod is stuck and should be deleted. Signed-off-by: Sagiv Ozeri Signed-off-by: Denis Bolotin Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_spq.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index c1a81ec0524b..0a9c5bb0fa48 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -142,6 +142,7 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn, DP_INFO(p_hwfn, "Ramrod is stuck, requesting MCP drain\n"); rc = qed_mcp_drain(p_hwfn, p_ptt); + qed_ptt_release(p_hwfn, p_ptt); if (rc) { DP_NOTICE(p_hwfn, "MCP drain failed\n"); goto err; @@ -150,18 +151,15 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn, /* Retry after drain */ rc = __qed_spq_block(p_hwfn, p_ent, p_fw_ret, true); if (!rc) - goto out; + return 0; comp_done = (struct qed_spq_comp_done *)p_ent->comp_cb.cookie; - if (comp_done->done == 1) + if (comp_done->done == 1) { if (p_fw_ret) *p_fw_ret = comp_done->fw_return_code; -out: - qed_ptt_release(p_hwfn, p_ptt); - return 0; - + return 0; + } err: - qed_ptt_release(p_hwfn, p_ptt); DP_NOTICE(p_hwfn, "Ramrod is stuck [CID %08x cmd %02x protocol %02x echo %04x]\n", le32_to_cpu(p_ent->elem.hdr.cid), -- cgit v1.2.3-58-ga151 From 8137b6ef0ce469154e5cf19f8e7fe04d9a72ac5e Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Thu, 8 Nov 2018 11:42:14 -0600 Subject: net: stmmac: Fix RX packet size > 8191 Ping problems with packets > 8191 as shown: PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data. 8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms wrong data byte 8144 should be 0xd0 but was 0x0 16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f %< ---------------snip-------------------------------------- 8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf 8144 0 0 0 0 d0 d1 ^^^^^^^ Notice the 4 bytes of 0 before the expected byte of d0. Databook notes that the RX buffer must be a multiple of 4/8/16 bytes [1]. Update the DMA Buffer size define to 8188 instead of 8192. Remove the -1 from the RX buffer size allocations and use the new DMA Buffer size directly. [1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a [section 8.4.2 - Table 8-24] Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets. Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Suggested-by: Jose Abreu Signed-off-by: Thor Thayer Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 3 ++- drivers/net/ethernet/stmicro/stmmac/descs_com.h | 2 +- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 2 +- drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 2 +- 4 files changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index b1b305f8f414..272b9ca66314 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -365,7 +365,8 @@ struct dma_features { /* GMAC TX FIFO is 8K, Rx FIFO is 16K */ #define BUF_SIZE_16KiB 16384 -#define BUF_SIZE_8KiB 8192 +/* RX Buffer size must be < 8191 and multiple of 4/8/16 bytes */ +#define BUF_SIZE_8KiB 8188 #define BUF_SIZE_4KiB 4096 #define BUF_SIZE_2KiB 2048 diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h index ca9d7e48034c..40d6356a7e73 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h @@ -31,7 +31,7 @@ /* Enhanced descriptors */ static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end) { - p->des1 |= cpu_to_le32(((BUF_SIZE_8KiB - 1) + p->des1 |= cpu_to_le32((BUF_SIZE_8KiB << ERDES1_BUFFER2_SIZE_SHIFT) & ERDES1_BUFFER2_SIZE_MASK); diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index 77914c89d749..5ef91a790f9d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -262,7 +262,7 @@ static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode, int end) { p->des0 |= cpu_to_le32(RDES0_OWN); - p->des1 |= cpu_to_le32((BUF_SIZE_8KiB - 1) & ERDES1_BUFFER1_SIZE_MASK); + p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK); if (mode == STMMAC_CHAIN_MODE) ehn_desc_rx_set_on_chain(p); diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c index abc3f85270cd..d8c5bc412219 100644 --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c @@ -140,7 +140,7 @@ static void clean_desc3(void *priv_ptr, struct dma_desc *p) static int set_16kib_bfsize(int mtu) { int ret = 0; - if (unlikely(mtu >= BUF_SIZE_8KiB)) + if (unlikely(mtu > BUF_SIZE_8KiB)) ret = BUF_SIZE_16KiB; return ret; } -- cgit v1.2.3-58-ga151 From 85b18b0237ce9986a81a1b9534b5e2ee116f5504 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 8 Nov 2018 20:38:26 +0100 Subject: net: smsc95xx: Fix MTU range The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") introduce a common MTU handling for usbnet. But it's missing the necessary changes for smsc95xx. So set the MTU range accordingly. This patch has been tested on a Raspberry Pi 3. Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 2d17f3b9bb16..f2d01cb6f958 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1321,6 +1321,8 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &smsc95xx_ethtool_ops; dev->net->flags |= IFF_MULTICAST; dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM; + dev->net->min_mtu = ETH_MIN_MTU; + dev->net->max_mtu = ETH_DATA_LEN; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; pdata->dev = dev; -- cgit v1.2.3-58-ga151 From 21d3bbdd4c342f16eac8d70893e45cdfa3381a1e Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Fri, 2 Nov 2018 16:12:21 -0700 Subject: nvmet: don't try to add ns to p2p map unless it actually uses it Even without CONFIG_P2PDMA this results in a error print: nvmet: no peer-to-peer memory is available that's supported by rxe0 and /dev/nullb0 Fixes: c6925093d0b2 ("nvmet: Optionally use PCI P2P memory") Signed-off-by: Sagi Grimberg Reviewed-by: Logan Gunthorpe Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/target/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index f4efe289dc7b..a5f9bbce863f 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -420,7 +420,7 @@ static void nvmet_p2pmem_ns_add_p2p(struct nvmet_ctrl *ctrl, struct pci_dev *p2p_dev; int ret; - if (!ctrl->p2p_client) + if (!ctrl->p2p_client || !ns->use_p2pmem) return; if (ns->p2p_dev) { -- cgit v1.2.3-58-ga151 From 8f676b8508c250bbe255096522fdefb73f1ea0b9 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Fri, 2 Nov 2018 11:22:13 -0700 Subject: nvme: make sure ns head inherits underlying device limits Whenever we update ns_head info, we need to make sure it is still compatible with all underlying backing devices because although nvme multipath doesn't have any explicit use of these limits, other devices can still be stacked on top of it which may rely on the underlying limits. Start with unlimited stacking limits, and every info update iterate over siblings and adjust queue limits. Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/host/core.c | 4 +++- drivers/nvme/host/multipath.c | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 2e65be8b1387..559d567693b8 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1519,8 +1519,10 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id) if (ns->ndev) nvme_nvm_update_nvm_info(ns); #ifdef CONFIG_NVME_MULTIPATH - if (ns->head->disk) + if (ns->head->disk) { nvme_update_disk_info(ns->head->disk, ns, id); + blk_queue_stack_limits(ns->head->disk->queue, ns->queue); + } #endif } diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 5e3cc8c59a39..9901afd804ce 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -285,6 +285,7 @@ int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl, struct nvme_ns_head *head) blk_queue_flag_set(QUEUE_FLAG_NONROT, q); /* set to a default value for 512 until disk is validated */ blk_queue_logical_block_size(q, 512); + blk_set_stacking_limits(&q->limits); /* we need to propagate up the VMC settings */ if (ctrl->vwc & NVME_CTRL_VWC_PRESENT) -- cgit v1.2.3-58-ga151 From d39aa4979219ca3d61c492f7460f1032b97b9ef2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 7 Nov 2018 09:20:25 +0100 Subject: Revert "nvmet-rdma: use a private workqueue for delete" This reverts commit 2acf70ade79d26b97611a8df52eb22aa33814cd4. The commit never really fixed the intended issue and caused all kinds of other issues, including a use before initialization. Suggested-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/target/rdma.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index ddce100be57a..3f7971d3706d 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -122,7 +122,6 @@ struct nvmet_rdma_device { int inline_page_count; }; -static struct workqueue_struct *nvmet_rdma_delete_wq; static bool nvmet_rdma_use_srq; module_param_named(use_srq, nvmet_rdma_use_srq, bool, 0444); MODULE_PARM_DESC(use_srq, "Use shared receive queue."); @@ -1274,12 +1273,12 @@ static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id, if (queue->host_qid == 0) { /* Let inflight controller teardown complete */ - flush_workqueue(nvmet_rdma_delete_wq); + flush_scheduled_work(); } ret = nvmet_rdma_cm_accept(cm_id, queue, &event->param.conn); if (ret) { - queue_work(nvmet_rdma_delete_wq, &queue->release_work); + schedule_work(&queue->release_work); /* Destroying rdma_cm id is not needed here */ return 0; } @@ -1344,7 +1343,7 @@ static void __nvmet_rdma_queue_disconnect(struct nvmet_rdma_queue *queue) if (disconnect) { rdma_disconnect(queue->cm_id); - queue_work(nvmet_rdma_delete_wq, &queue->release_work); + schedule_work(&queue->release_work); } } @@ -1374,7 +1373,7 @@ static void nvmet_rdma_queue_connect_fail(struct rdma_cm_id *cm_id, mutex_unlock(&nvmet_rdma_queue_mutex); pr_err("failed to connect queue %d\n", queue->idx); - queue_work(nvmet_rdma_delete_wq, &queue->release_work); + schedule_work(&queue->release_work); } /** @@ -1656,17 +1655,8 @@ static int __init nvmet_rdma_init(void) if (ret) goto err_ib_client; - nvmet_rdma_delete_wq = alloc_workqueue("nvmet-rdma-delete-wq", - WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS, 0); - if (!nvmet_rdma_delete_wq) { - ret = -ENOMEM; - goto err_unreg_transport; - } - return 0; -err_unreg_transport: - nvmet_unregister_transport(&nvmet_rdma_ops); err_ib_client: ib_unregister_client(&nvmet_rdma_ib_client); return ret; @@ -1674,7 +1664,6 @@ err_ib_client: static void __exit nvmet_rdma_exit(void) { - destroy_workqueue(nvmet_rdma_delete_wq); nvmet_unregister_transport(&nvmet_rdma_ops); ib_unregister_client(&nvmet_rdma_ib_client); WARN_ON_ONCE(!list_empty(&nvmet_rdma_queue_list)); -- cgit v1.2.3-58-ga151 From 3941552aec1e04d63999988a057ae09a1c56ebeb Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 1 Nov 2018 13:33:07 +0100 Subject: xen: remove size limit of privcmd-buf mapping interface Currently the size of hypercall buffers allocated via /dev/xen/hypercall is limited to a default of 64 memory pages. For live migration of guests this might be too small as the page dirty bitmask needs to be sized according to the size of the guest. This means migrating a 8GB sized guest is already exhausting the default buffer size for the dirty bitmap. There is no sensible way to set a sane limit, so just remove it completely. The device node's usage is limited to root anyway, so there is no additional DOS scenario added by allowing unlimited buffers. While at it make the error path for the -ENOMEM case a little bit cleaner by setting n_pages to the number of successfully allocated pages instead of the target size. Fixes: c51b3c639e01f2 ("xen: add new hypercall buffer mapping device") Cc: #4.18 Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross --- drivers/xen/privcmd-buf.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/privcmd-buf.c b/drivers/xen/privcmd-buf.c index df1ed37c3269..de01a6d0059d 100644 --- a/drivers/xen/privcmd-buf.c +++ b/drivers/xen/privcmd-buf.c @@ -21,15 +21,9 @@ MODULE_LICENSE("GPL"); -static unsigned int limit = 64; -module_param(limit, uint, 0644); -MODULE_PARM_DESC(limit, "Maximum number of pages that may be allocated by " - "the privcmd-buf device per open file"); - struct privcmd_buf_private { struct mutex lock; struct list_head list; - unsigned int allocated; }; struct privcmd_buf_vma_private { @@ -60,13 +54,10 @@ static void privcmd_buf_vmapriv_free(struct privcmd_buf_vma_private *vma_priv) { unsigned int i; - vma_priv->file_priv->allocated -= vma_priv->n_pages; - list_del(&vma_priv->list); for (i = 0; i < vma_priv->n_pages; i++) - if (vma_priv->pages[i]) - __free_page(vma_priv->pages[i]); + __free_page(vma_priv->pages[i]); kfree(vma_priv); } @@ -146,8 +137,7 @@ static int privcmd_buf_mmap(struct file *file, struct vm_area_struct *vma) unsigned int i; int ret = 0; - if (!(vma->vm_flags & VM_SHARED) || count > limit || - file_priv->allocated + count > limit) + if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; vma_priv = kzalloc(sizeof(*vma_priv) + count * sizeof(void *), @@ -155,19 +145,15 @@ static int privcmd_buf_mmap(struct file *file, struct vm_area_struct *vma) if (!vma_priv) return -ENOMEM; - vma_priv->n_pages = count; - count = 0; - for (i = 0; i < vma_priv->n_pages; i++) { + for (i = 0; i < count; i++) { vma_priv->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO); if (!vma_priv->pages[i]) break; - count++; + vma_priv->n_pages++; } mutex_lock(&file_priv->lock); - file_priv->allocated += count; - vma_priv->file_priv = file_priv; vma_priv->users = 1; -- cgit v1.2.3-58-ga151 From 5b277402deac0691226a947df71c581686bd4020 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 9 Nov 2018 16:44:11 +0530 Subject: i2c: omap: Enable for ARCH_K3 Allow I2C_OMAP to be built for K3 platforms. Signed-off-by: Vignesh R Reviewed-by: Grygorii Strashko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 56ccb1ea7da5..77dc94b44011 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -752,7 +752,7 @@ config I2C_OCORES config I2C_OMAP tristate "OMAP I2C adapter" - depends on ARCH_OMAP + depends on ARCH_OMAP || ARCH_K3 default y if MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes to this option, support will be included for the -- cgit v1.2.3-58-ga151 From 848bd3f3de9d44950c00eda6c115e8e9785440da Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 2 Nov 2018 13:57:32 -0700 Subject: i2c: qcom-geni: Fix runtime PM mismatch with child devices We need to enable runtime PM on this i2c controller before populating child devices with i2c_add_adapter(). Otherwise, if a child device uses runtime PM and stays runtime PM enabled we'll get the following warning at boot. Enabling runtime PM for inactive device (a98000.i2c) with active children [...] Call trace: pm_runtime_enable+0xd8/0xf8 geni_i2c_probe+0x440/0x460 platform_drv_probe+0x74/0xc8 [...] Let's move the runtime PM enabling and setup to before we add the adapter, so that this device can respond to runtime PM requests from children. Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qcom-geni.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 527f55c8c4c7..db075bc0d952 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -571,18 +571,19 @@ static int geni_i2c_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth); - ret = i2c_add_adapter(&gi2c->adap); - if (ret) { - dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret); - return ret; - } - gi2c->suspended = 1; pm_runtime_set_suspended(gi2c->se.dev); pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY); pm_runtime_use_autosuspend(gi2c->se.dev); pm_runtime_enable(gi2c->se.dev); + ret = i2c_add_adapter(&gi2c->adap); + if (ret) { + dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret); + pm_runtime_disable(gi2c->se.dev); + return ret; + } + return 0; } @@ -590,8 +591,8 @@ static int geni_i2c_remove(struct platform_device *pdev) { struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev); - pm_runtime_disable(gi2c->se.dev); i2c_del_adapter(&gi2c->adap); + pm_runtime_disable(gi2c->se.dev); return 0; } -- cgit v1.2.3-58-ga151 From c71bcdcb42a7493348d3b45dee8139843bf45efc Mon Sep 17 00:00:00 2001 From: Ajay Gupta Date: Fri, 26 Oct 2018 09:36:58 -0700 Subject: i2c: add i2c bus driver for NVIDIA GPU Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C controller which can be accessed over I2C. This driver adds I2C bus driver to communicate with Type-C controller. I2C client driver will be part of USB Type-C UCSI driver. Signed-off-by: Ajay Gupta Reviewed-by: Andy Shevchenko [wsa: kept Makefile sorting] Signed-off-by: Wolfram Sang --- Documentation/i2c/busses/i2c-nvidia-gpu | 18 ++ MAINTAINERS | 7 + drivers/i2c/busses/Kconfig | 9 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-nvidia-gpu.c | 368 ++++++++++++++++++++++++++++++++ 5 files changed, 403 insertions(+) create mode 100644 Documentation/i2c/busses/i2c-nvidia-gpu create mode 100644 drivers/i2c/busses/i2c-nvidia-gpu.c (limited to 'drivers') diff --git a/Documentation/i2c/busses/i2c-nvidia-gpu b/Documentation/i2c/busses/i2c-nvidia-gpu new file mode 100644 index 000000000000..31884d2b2eb5 --- /dev/null +++ b/Documentation/i2c/busses/i2c-nvidia-gpu @@ -0,0 +1,18 @@ +Kernel driver i2c-nvidia-gpu + +Datasheet: not publicly available. + +Authors: + Ajay Gupta + +Description +----------- + +i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing +and later GPUs and it is used to communicate with Type-C controller on GPUs. + +If your 'lspci -v' listing shows something like the following, + +01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1) + +then this driver should support the I2C controller of your GPU. diff --git a/MAINTAINERS b/MAINTAINERS index 259fe9445d2f..1835d3ffd7ea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6861,6 +6861,13 @@ L: linux-acpi@vger.kernel.org S: Maintained F: drivers/i2c/i2c-core-acpi.c +I2C CONTROLLER DRIVER FOR NVIDIA GPU +M: Ajay Gupta +L: linux-i2c@vger.kernel.org +S: Maintained +F: Documentation/i2c/busses/i2c-nvidia-gpu +F: drivers/i2c/busses/i2c-nvidia-gpu.c + I2C MUXES M: Peter Rosin L: linux-i2c@vger.kernel.org diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 77dc94b44011..f2c681971201 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -224,6 +224,15 @@ config I2C_NFORCE2_S4985 This driver can also be built as a module. If so, the module will be called i2c-nforce2-s4985. +config I2C_NVIDIA_GPU + tristate "NVIDIA GPU I2C controller" + depends on PCI + help + If you say yes to this option, support will be included for the + NVIDIA GPU I2C controller which is used to communicate with the GPU's + Type-C controller. This driver can also be built as a module called + i2c-nvidia-gpu. + config I2C_SIS5595 tristate "SiS 5595" depends on PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 18b26af82b1c..5f0cb6915969 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_I2C_ISCH) += i2c-isch.o obj-$(CONFIG_I2C_ISMT) += i2c-ismt.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o +obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c new file mode 100644 index 000000000000..744f5e42636b --- /dev/null +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Nvidia GPU I2C controller Driver + * + * Copyright (C) 2018 NVIDIA Corporation. All rights reserved. + * Author: Ajay Gupta + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* I2C definitions */ +#define I2C_MST_CNTL 0x00 +#define I2C_MST_CNTL_GEN_START BIT(0) +#define I2C_MST_CNTL_GEN_STOP BIT(1) +#define I2C_MST_CNTL_CMD_READ (1 << 2) +#define I2C_MST_CNTL_CMD_WRITE (2 << 2) +#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6 +#define I2C_MST_CNTL_GEN_NACK BIT(28) +#define I2C_MST_CNTL_STATUS GENMASK(30, 29) +#define I2C_MST_CNTL_STATUS_OKAY (0 << 29) +#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29) +#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29) +#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29) +#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31) + +#define I2C_MST_ADDR 0x04 + +#define I2C_MST_I2C0_TIMING 0x08 +#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16 +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255 +#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24) + +#define I2C_MST_DATA 0x0c + +#define I2C_MST_HYBRID_PADCTL 0x20 +#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0) +#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14) +#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15) + +struct gpu_i2c_dev { + struct device *dev; + void __iomem *regs; + struct i2c_adapter adapter; + struct i2c_board_info *gpu_ccgx_ucsi; +}; + +static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd) +{ + u32 val; + + /* enable I2C */ + val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL); + val |= I2C_MST_HYBRID_PADCTL_MODE_I2C | + I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV | + I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV; + writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL); + + /* enable 100KHZ mode */ + val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ; + val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX + << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT); + val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK; + writel(val, i2cd->regs + I2C_MST_I2C0_TIMING); +} + +static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd) +{ + unsigned long target = jiffies + msecs_to_jiffies(1000); + u32 val; + + do { + val = readl(i2cd->regs + I2C_MST_CNTL); + if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER)) + break; + if ((val & I2C_MST_CNTL_STATUS) != + I2C_MST_CNTL_STATUS_BUS_BUSY) + break; + usleep_range(500, 600); + } while (time_is_after_jiffies(target)); + + if (time_is_before_jiffies(target)) { + dev_err(i2cd->dev, "i2c timeout error %x\n", val); + return -ETIME; + } + + val = readl(i2cd->regs + I2C_MST_CNTL); + switch (val & I2C_MST_CNTL_STATUS) { + case I2C_MST_CNTL_STATUS_OKAY: + return 0; + case I2C_MST_CNTL_STATUS_NO_ACK: + return -EIO; + case I2C_MST_CNTL_STATUS_TIMEOUT: + return -ETIME; + default: + return 0; + } +} + +static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len) +{ + int status; + u32 val; + + val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ | + (len << I2C_MST_CNTL_BURST_SIZE_SHIFT) | + I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK; + writel(val, i2cd->regs + I2C_MST_CNTL); + + status = gpu_i2c_check_status(i2cd); + if (status < 0) + return status; + + val = readl(i2cd->regs + I2C_MST_DATA); + switch (len) { + case 1: + data[0] = val; + break; + case 2: + put_unaligned_be16(val, data); + break; + case 3: + put_unaligned_be16(val >> 8, data); + data[2] = val; + break; + case 4: + put_unaligned_be32(val, data); + break; + default: + break; + } + return status; +} + +static int gpu_i2c_start(struct gpu_i2c_dev *i2cd) +{ + writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL); + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd) +{ + writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL); + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data) +{ + u32 val; + + writel(data, i2cd->regs + I2C_MST_DATA); + + val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT); + writel(val, i2cd->regs + I2C_MST_CNTL); + + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap); + int status, status2; + int i, j; + + /* + * The controller supports maximum 4 byte read due to known + * limitation of sending STOP after every read. + */ + for (i = 0; i < num; i++) { + if (msgs[i].flags & I2C_M_RD) { + /* program client address before starting read */ + writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR); + /* gpu_i2c_read has implicit start */ + status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len); + if (status < 0) + goto stop; + } else { + u8 addr = i2c_8bit_addr_from_msg(msgs + i); + + status = gpu_i2c_start(i2cd); + if (status < 0) { + if (i == 0) + return status; + goto stop; + } + + status = gpu_i2c_write(i2cd, addr); + if (status < 0) + goto stop; + + for (j = 0; j < msgs[i].len; j++) { + status = gpu_i2c_write(i2cd, msgs[i].buf[j]); + if (status < 0) + goto stop; + } + } + } + status = gpu_i2c_stop(i2cd); + if (status < 0) + return status; + + return i; +stop: + status2 = gpu_i2c_stop(i2cd); + if (status2 < 0) + dev_err(i2cd->dev, "i2c stop failed %d\n", status2); + return status; +} + +static const struct i2c_adapter_quirks gpu_i2c_quirks = { + .max_read_len = 4, + .flags = I2C_AQ_COMB_WRITE_THEN_READ, +}; + +static u32 gpu_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm gpu_i2c_algorithm = { + .master_xfer = gpu_i2c_master_xfer, + .functionality = gpu_i2c_functionality, +}; + +/* + * This driver is for Nvidia GPU cards with USB Type-C interface. + * We want to identify the cards using vendor ID and class code only + * to avoid dependency of adding product id for any new card which + * requires this driver. + * Currently there is no class code defined for UCSI device over PCI + * so using UNKNOWN class for now and it will be updated when UCSI + * over PCI gets a class code. + * There is no other NVIDIA cards with UNKNOWN class code. Even if the + * driver gets loaded for an undesired card then eventually i2c_read() + * (initiated from UCSI i2c_client) will timeout or UCSI commands will + * timeout. + */ +#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80 +static const struct pci_device_id gpu_i2c_ids[] = { + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00}, + { } +}; +MODULE_DEVICE_TABLE(pci, gpu_i2c_ids); + +static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq) +{ + struct i2c_client *ccgx_client; + + i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev, + sizeof(*i2cd->gpu_ccgx_ucsi), + GFP_KERNEL); + if (!i2cd->gpu_ccgx_ucsi) + return -ENOMEM; + + strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi", + sizeof(i2cd->gpu_ccgx_ucsi->type)); + i2cd->gpu_ccgx_ucsi->addr = 0x8; + i2cd->gpu_ccgx_ucsi->irq = irq; + ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi); + if (!ccgx_client) + return -ENODEV; + + return 0; +} + +static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct gpu_i2c_dev *i2cd; + int status; + + i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL); + if (!i2cd) + return -ENOMEM; + + i2cd->dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, i2cd); + + status = pcim_enable_device(pdev); + if (status < 0) { + dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status); + return status; + } + + pci_set_master(pdev); + + i2cd->regs = pcim_iomap(pdev, 0, 0); + if (!i2cd->regs) { + dev_err(&pdev->dev, "pcim_iomap failed\n"); + return -ENOMEM; + } + + status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); + if (status < 0) { + dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status); + return status; + } + + gpu_enable_i2c_bus(i2cd); + + i2c_set_adapdata(&i2cd->adapter, i2cd); + i2cd->adapter.owner = THIS_MODULE; + strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter", + sizeof(i2cd->adapter.name)); + i2cd->adapter.algo = &gpu_i2c_algorithm; + i2cd->adapter.quirks = &gpu_i2c_quirks; + i2cd->adapter.dev.parent = &pdev->dev; + status = i2c_add_adapter(&i2cd->adapter); + if (status < 0) + goto free_irq_vectors; + + status = gpu_populate_client(i2cd, pdev->irq); + if (status < 0) { + dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status); + goto del_adapter; + } + + return 0; + +del_adapter: + i2c_del_adapter(&i2cd->adapter); +free_irq_vectors: + pci_free_irq_vectors(pdev); + return status; +} + +static void gpu_i2c_remove(struct pci_dev *pdev) +{ + struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev); + + i2c_del_adapter(&i2cd->adapter); + pci_free_irq_vectors(pdev); +} + +static int gpu_i2c_resume(struct device *dev) +{ + struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev); + + gpu_enable_i2c_bus(i2cd); + return 0; +} + +UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL); + +static struct pci_driver gpu_i2c_driver = { + .name = "nvidia-gpu", + .id_table = gpu_i2c_ids, + .probe = gpu_i2c_probe, + .remove = gpu_i2c_remove, + .driver = { + .pm = &gpu_i2c_driver_pm, + }, +}; + +module_pci_driver(gpu_i2c_driver); + +MODULE_AUTHOR("Ajay Gupta "); +MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-58-ga151 From caccdcc5dbec0dd9643fe1667893e78631a4d38e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 9 Nov 2018 17:54:38 +0100 Subject: i2c: nvidia-gpu: make pm_ops static sparse rightfully says: warning: symbol 'gpu_i2c_driver_pm' was not declared. Should it be static? Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-nvidia-gpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c index 744f5e42636b..8822357bca0c 100644 --- a/drivers/i2c/busses/i2c-nvidia-gpu.c +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -349,7 +349,7 @@ static int gpu_i2c_resume(struct device *dev) return 0; } -UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL); +static UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL); static struct pci_driver gpu_i2c_driver = { .name = "nvidia-gpu", -- cgit v1.2.3-58-ga151 From 641a41dbba217ee5bd26abe6be77f8cead9cd00e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 30 Oct 2018 15:13:35 +0900 Subject: serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: # v4.11+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Ulrich Hecht Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e19bfbba8a01..effba6ce0caa 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3102,6 +3102,7 @@ static struct uart_driver sci_uart_driver = { static int sci_remove(struct platform_device *dev) { struct sci_port *port = platform_get_drvdata(dev); + unsigned int type = port->port.type; /* uart_remove_... clears it */ sci_ports_in_use &= ~BIT(port->port.line); uart_remove_one_port(&sci_uart_driver, &port->port); @@ -3112,8 +3113,7 @@ static int sci_remove(struct platform_device *dev) sysfs_remove_file(&dev->dev.kobj, &dev_attr_rx_fifo_trigger.attr); } - if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB || - port->port.type == PORT_HSCIF) { + if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF) { sysfs_remove_file(&dev->dev.kobj, &dev_attr_rx_fifo_timeout.attr); } -- cgit v1.2.3-58-ga151 From 247c554a14aa16ca08f4ed4d9eb39a2389f69d1d Mon Sep 17 00:00:00 2001 From: Ajay Gupta Date: Fri, 26 Oct 2018 09:36:59 -0700 Subject: usb: typec: ucsi: add support for Cypress CCGx Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller over I2C interface. This UCSI I2C driver uses I2C bus driver interface for communicating with Type-C controller. Signed-off-by: Ajay Gupta Acked-by: Heikki Krogerus Signed-off-by: Wolfram Sang --- drivers/usb/typec/ucsi/Kconfig | 10 ++ drivers/usb/typec/ucsi/Makefile | 2 + drivers/usb/typec/ucsi/ucsi_ccg.c | 307 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 319 insertions(+) create mode 100644 drivers/usb/typec/ucsi/ucsi_ccg.c (limited to 'drivers') diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig index e36d6c73c4a4..78118883f96c 100644 --- a/drivers/usb/typec/ucsi/Kconfig +++ b/drivers/usb/typec/ucsi/Kconfig @@ -23,6 +23,16 @@ config TYPEC_UCSI if TYPEC_UCSI +config UCSI_CCG + tristate "UCSI Interface Driver for Cypress CCGx" + depends on I2C + help + This driver enables UCSI support on platforms that expose a + Cypress CCGx Type-C controller over I2C interface. + + To compile the driver as a module, choose M here: the module will be + called ucsi_ccg. + config UCSI_ACPI tristate "UCSI ACPI Interface Driver" depends on ACPI diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile index 7afbea512207..2f4900b26210 100644 --- a/drivers/usb/typec/ucsi/Makefile +++ b/drivers/usb/typec/ucsi/Makefile @@ -8,3 +8,5 @@ typec_ucsi-y := ucsi.o typec_ucsi-$(CONFIG_TRACING) += trace.o obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o + +obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c new file mode 100644 index 000000000000..de8a43bdff68 --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UCSI driver for Cypress CCGx Type-C controller + * + * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved. + * Author: Ajay Gupta + * + * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c + */ +#include +#include +#include +#include +#include +#include + +#include +#include "ucsi.h" + +struct ucsi_ccg { + struct device *dev; + struct ucsi *ucsi; + struct ucsi_ppm ppm; + struct i2c_client *client; +}; + +#define CCGX_RAB_INTR_REG 0x06 +#define CCGX_RAB_UCSI_CONTROL 0x39 +#define CCGX_RAB_UCSI_CONTROL_START BIT(0) +#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1) +#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff)) + +static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) +{ + struct i2c_client *client = uc->client; + const struct i2c_adapter_quirks *quirks = client->adapter->quirks; + unsigned char buf[2]; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0x0, + .len = sizeof(buf), + .buf = buf, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = data, + }, + }; + u32 rlen, rem_len = len, max_read_len = len; + int status; + + /* check any max_read_len limitation on i2c adapter */ + if (quirks && quirks->max_read_len) + max_read_len = quirks->max_read_len; + + while (rem_len > 0) { + msgs[1].buf = &data[len - rem_len]; + rlen = min_t(u16, rem_len, max_read_len); + msgs[1].len = rlen; + put_unaligned_le16(rab, buf); + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (status < 0) { + dev_err(uc->dev, "i2c_transfer failed %d\n", status); + return status; + } + rab += rlen; + rem_len -= rlen; + } + + return 0; +} + +static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) +{ + struct i2c_client *client = uc->client; + unsigned char *buf; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0x0, + } + }; + int status; + + buf = kzalloc(len + sizeof(rab), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + put_unaligned_le16(rab, buf); + memcpy(buf + sizeof(rab), data, len); + + msgs[0].len = len + sizeof(rab); + msgs[0].buf = buf; + + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (status < 0) { + dev_err(uc->dev, "i2c_transfer failed %d\n", status); + kfree(buf); + return status; + } + + kfree(buf); + return 0; +} + +static int ucsi_ccg_init(struct ucsi_ccg *uc) +{ + unsigned int count = 10; + u8 data; + int status; + + data = CCGX_RAB_UCSI_CONTROL_STOP; + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); + if (status < 0) + return status; + + data = CCGX_RAB_UCSI_CONTROL_START; + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); + if (status < 0) + return status; + + /* + * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control + * register write will push response which must be cleared. + */ + do { + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + if (!data) + return 0; + + status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + usleep_range(10000, 11000); + } while (--count); + + return -ETIMEDOUT; +} + +static int ucsi_ccg_send_data(struct ucsi_ccg *uc) +{ + u8 *ppm = (u8 *)uc->ppm.data; + int status; + u16 rab; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_out)); + status = ccg_write(uc, rab, ppm + + offsetof(struct ucsi_data, message_out), + sizeof(uc->ppm.data->message_out)); + if (status < 0) + return status; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, ctrl)); + return ccg_write(uc, rab, ppm + offsetof(struct ucsi_data, ctrl), + sizeof(uc->ppm.data->ctrl)); +} + +static int ucsi_ccg_recv_data(struct ucsi_ccg *uc) +{ + u8 *ppm = (u8 *)uc->ppm.data; + int status; + u16 rab; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, cci)); + status = ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, cci), + sizeof(uc->ppm.data->cci)); + if (status < 0) + return status; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_in)); + return ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, message_in), + sizeof(uc->ppm.data->message_in)); +} + +static int ucsi_ccg_ack_interrupt(struct ucsi_ccg *uc) +{ + int status; + unsigned char data; + + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + return ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); +} + +static int ucsi_ccg_sync(struct ucsi_ppm *ppm) +{ + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm); + int status; + + status = ucsi_ccg_recv_data(uc); + if (status < 0) + return status; + + /* ack interrupt to allow next command to run */ + return ucsi_ccg_ack_interrupt(uc); +} + +static int ucsi_ccg_cmd(struct ucsi_ppm *ppm, struct ucsi_control *ctrl) +{ + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm); + + ppm->data->ctrl.raw_cmd = ctrl->raw_cmd; + return ucsi_ccg_send_data(uc); +} + +static irqreturn_t ccg_irq_handler(int irq, void *data) +{ + struct ucsi_ccg *uc = data; + + ucsi_notify(uc->ucsi); + + return IRQ_HANDLED; +} + +static int ucsi_ccg_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ucsi_ccg *uc; + int status; + u16 rab; + + uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL); + if (!uc) + return -ENOMEM; + + uc->ppm.data = devm_kzalloc(dev, sizeof(struct ucsi_data), GFP_KERNEL); + if (!uc->ppm.data) + return -ENOMEM; + + uc->ppm.cmd = ucsi_ccg_cmd; + uc->ppm.sync = ucsi_ccg_sync; + uc->dev = dev; + uc->client = client; + + /* reset ccg device and initialize ucsi */ + status = ucsi_ccg_init(uc); + if (status < 0) { + dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status); + return status; + } + + status = devm_request_threaded_irq(dev, client->irq, NULL, + ccg_irq_handler, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + dev_name(dev), uc); + if (status < 0) { + dev_err(uc->dev, "request_threaded_irq failed - %d\n", status); + return status; + } + + uc->ucsi = ucsi_register_ppm(dev, &uc->ppm); + if (IS_ERR(uc->ucsi)) { + dev_err(uc->dev, "ucsi_register_ppm failed\n"); + return PTR_ERR(uc->ucsi); + } + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, version)); + status = ccg_read(uc, rab, (u8 *)(uc->ppm.data) + + offsetof(struct ucsi_data, version), + sizeof(uc->ppm.data->version)); + if (status < 0) { + ucsi_unregister_ppm(uc->ucsi); + return status; + } + + i2c_set_clientdata(client, uc); + return 0; +} + +static int ucsi_ccg_remove(struct i2c_client *client) +{ + struct ucsi_ccg *uc = i2c_get_clientdata(client); + + ucsi_unregister_ppm(uc->ucsi); + + return 0; +} + +static const struct i2c_device_id ucsi_ccg_device_id[] = { + {"ccgx-ucsi", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id); + +static struct i2c_driver ucsi_ccg_driver = { + .driver = { + .name = "ucsi_ccg", + }, + .probe = ucsi_ccg_probe, + .remove = ucsi_ccg_remove, + .id_table = ucsi_ccg_device_id, +}; + +module_i2c_driver(ucsi_ccg_driver); + +MODULE_AUTHOR("Ajay Gupta "); +MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-58-ga151 From 1aefa98b010e9cc7a07046cbcb1237ddad85b708 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 9 Nov 2018 15:20:54 +0530 Subject: clk: qcom: gcc: Fix board clock node name Device tree node name are not supposed to have "_" in them so fix the node name use of xo_board to xo-board Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Vinod Koul Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-qcs404.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c index e4ca6a45f313..ef1b267cb058 100644 --- a/drivers/clk/qcom/gcc-qcs404.c +++ b/drivers/clk/qcom/gcc-qcs404.c @@ -265,7 +265,7 @@ static struct clk_fixed_factor cxo = { .div = 1, .hw.init = &(struct clk_init_data){ .name = "cxo", - .parent_names = (const char *[]){ "xo_board" }, + .parent_names = (const char *[]){ "xo-board" }, .num_parents = 1, .ops = &clk_fixed_factor_ops, }, -- cgit v1.2.3-58-ga151 From 35e8e8b45d31bec34379dd36e7b71448e003efb2 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Fri, 9 Nov 2018 11:53:56 +0000 Subject: net: aquantia: synchronized flow control between mac/phy Flow control statuses were not synchronized between blocks, that caused packets/link drop on some corner cases, when MAC sent PFC although Phy was not expecting these to come. Driver should readout the negotiated FC from phy and configure RX block accordigly. This is done on each link change event with information from FW. Fixes: 288551de45aa ("net: aquantia: Implement rx/tx flow control ethtools callback") Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c | 8 ++++---- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 3 +++ drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 14 +++++++++++++- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 12 +++++++++--- .../aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c | 21 +++++++++++++++++++++ 5 files changed, 50 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c index 6a633c70f603..99ef1daaa4d8 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c @@ -407,13 +407,13 @@ static void aq_ethtool_get_pauseparam(struct net_device *ndev, struct ethtool_pauseparam *pause) { struct aq_nic_s *aq_nic = netdev_priv(ndev); + u32 fc = aq_nic->aq_nic_cfg.flow_control; pause->autoneg = 0; - if (aq_nic->aq_hw->aq_nic_cfg->flow_control & AQ_NIC_FC_RX) - pause->rx_pause = 1; - if (aq_nic->aq_hw->aq_nic_cfg->flow_control & AQ_NIC_FC_TX) - pause->tx_pause = 1; + pause->rx_pause = !!(fc & AQ_NIC_FC_RX); + pause->tx_pause = !!(fc & AQ_NIC_FC_TX); + } static int aq_ethtool_set_pauseparam(struct net_device *ndev, diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index e8689241204e..7ec8d24b2b0b 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -204,6 +204,7 @@ struct aq_hw_ops { int (*hw_get_fw_version)(struct aq_hw_s *self, u32 *fw_version); + int (*hw_set_fc)(struct aq_hw_s *self, u32 fc, u32 tc); }; struct aq_fw_ops { @@ -226,6 +227,8 @@ struct aq_fw_ops { int (*update_stats)(struct aq_hw_s *self); + u32 (*get_flow_control)(struct aq_hw_s *self, u32 *fcmode); + int (*set_flow_control)(struct aq_hw_s *self); int (*set_power)(struct aq_hw_s *self, unsigned int power_state, diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 5fed24446687..0011a3f2f672 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -124,6 +124,7 @@ void aq_nic_cfg_start(struct aq_nic_s *self) static int aq_nic_update_link_status(struct aq_nic_s *self) { int err = self->aq_fw_ops->update_link_status(self->aq_hw); + u32 fc = 0; if (err) return err; @@ -133,6 +134,15 @@ static int aq_nic_update_link_status(struct aq_nic_s *self) AQ_CFG_DRV_NAME, self->link_status.mbps, self->aq_hw->aq_link_status.mbps); aq_nic_update_interrupt_moderation_settings(self); + + /* Driver has to update flow control settings on RX block + * on any link event. + * We should query FW whether it negotiated FC. + */ + if (self->aq_fw_ops->get_flow_control) + self->aq_fw_ops->get_flow_control(self->aq_hw, &fc); + if (self->aq_hw_ops->hw_set_fc) + self->aq_hw_ops->hw_set_fc(self->aq_hw, fc, 0); } self->link_status = self->aq_hw->aq_link_status; @@ -772,7 +782,9 @@ void aq_nic_get_link_ksettings(struct aq_nic_s *self, ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause); - if (self->aq_nic_cfg.flow_control & AQ_NIC_FC_TX) + /* Asym is when either RX or TX, but not both */ + if (!!(self->aq_nic_cfg.flow_control & AQ_NIC_FC_TX) ^ + !!(self->aq_nic_cfg.flow_control & AQ_NIC_FC_RX)) ethtool_link_ksettings_add_link_mode(cmd, advertising, Asym_Pause); diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 76d25d594a0f..119265762b0c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -100,12 +100,17 @@ static int hw_atl_b0_hw_reset(struct aq_hw_s *self) return err; } +static int hw_atl_b0_set_fc(struct aq_hw_s *self, u32 fc, u32 tc) +{ + hw_atl_rpb_rx_xoff_en_per_tc_set(self, !!(fc & AQ_NIC_FC_RX), tc); + return 0; +} + static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self) { u32 tc = 0U; u32 buff_size = 0U; unsigned int i_priority = 0U; - bool is_rx_flow_control = false; /* TPS Descriptor rate init */ hw_atl_tps_tx_pkt_shed_desc_rate_curr_time_res_set(self, 0x0U); @@ -138,7 +143,6 @@ static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self) /* QoS Rx buf size per TC */ tc = 0; - is_rx_flow_control = (AQ_NIC_FC_RX & self->aq_nic_cfg->flow_control); buff_size = HW_ATL_B0_RXBUF_MAX; hw_atl_rpb_rx_pkt_buff_size_per_tc_set(self, buff_size, tc); @@ -150,7 +154,8 @@ static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self) (buff_size * (1024U / 32U) * 50U) / 100U, tc); - hw_atl_rpb_rx_xoff_en_per_tc_set(self, is_rx_flow_control ? 1U : 0U, tc); + + hw_atl_b0_set_fc(self, self->aq_nic_cfg->flow_control, tc); /* QoS 802.1p priority -> TC mapping */ for (i_priority = 8U; i_priority--;) @@ -963,4 +968,5 @@ const struct aq_hw_ops hw_atl_ops_b0 = { .hw_get_regs = hw_atl_utils_hw_get_regs, .hw_get_hw_stats = hw_atl_utils_get_hw_stats, .hw_get_fw_version = hw_atl_utils_get_fw_version, + .hw_set_fc = hw_atl_b0_set_fc, }; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c index 096ca5730887..7de3220d9cab 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c @@ -30,6 +30,8 @@ #define HW_ATL_FW2X_MPI_STATE_ADDR 0x370 #define HW_ATL_FW2X_MPI_STATE2_ADDR 0x374 +#define HW_ATL_FW2X_CAP_PAUSE BIT(CAPS_HI_PAUSE) +#define HW_ATL_FW2X_CAP_ASYM_PAUSE BIT(CAPS_HI_ASYMMETRIC_PAUSE) #define HW_ATL_FW2X_CAP_SLEEP_PROXY BIT(CAPS_HI_SLEEP_PROXY) #define HW_ATL_FW2X_CAP_WOL BIT(CAPS_HI_WOL) @@ -451,6 +453,24 @@ static int aq_fw2x_set_flow_control(struct aq_hw_s *self) return 0; } +static u32 aq_fw2x_get_flow_control(struct aq_hw_s *self, u32 *fcmode) +{ + u32 mpi_state = aq_hw_read_reg(self, HW_ATL_FW2X_MPI_STATE2_ADDR); + + if (mpi_state & HW_ATL_FW2X_CAP_PAUSE) + if (mpi_state & HW_ATL_FW2X_CAP_ASYM_PAUSE) + *fcmode = AQ_NIC_FC_RX; + else + *fcmode = AQ_NIC_FC_RX | AQ_NIC_FC_TX; + else + if (mpi_state & HW_ATL_FW2X_CAP_ASYM_PAUSE) + *fcmode = AQ_NIC_FC_TX; + else + *fcmode = 0; + + return 0; +} + const struct aq_fw_ops aq_fw_2x_ops = { .init = aq_fw2x_init, .deinit = aq_fw2x_deinit, @@ -465,4 +485,5 @@ const struct aq_fw_ops aq_fw_2x_ops = { .set_eee_rate = aq_fw2x_set_eee_rate, .get_eee_rate = aq_fw2x_get_eee_rate, .set_flow_control = aq_fw2x_set_flow_control, + .get_flow_control = aq_fw2x_get_flow_control }; -- cgit v1.2.3-58-ga151 From 7a1bb49461b12b2e6332a4d054256835f45203f3 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 9 Nov 2018 11:53:57 +0000 Subject: net: aquantia: fix potential IOMMU fault after driver unbind IOMMU fault may occurr on unbind/bind or if_down/if_up sequence. Although driver disables the rings on down, this is not enough. Due to internal HW design, during subsequent initialization NIC sometimes may reuse RX descriptors cache and write to the host memory from the descriptor cache. That's get catched by IOMMU on host. This patch invalidates the descriptor cache in NIC on interface down to prevent writing to the cached descriptors and to the memory pointed in those descriptors. Signed-off-by: Dmitry Bogdanov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- .../net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 6 ++++++ .../net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c | 8 ++++++++ .../net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h | 3 +++ .../aquantia/atlantic/hw_atl/hw_atl_llh_internal.h | 18 ++++++++++++++++++ 4 files changed, 35 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 119265762b0c..3aec56623bf5 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -920,6 +920,12 @@ static int hw_atl_b0_hw_interrupt_moderation_set(struct aq_hw_s *self) static int hw_atl_b0_hw_stop(struct aq_hw_s *self) { hw_atl_b0_hw_irq_disable(self, HW_ATL_B0_INT_MASK); + + /* Invalidate Descriptor Cache to prevent writing to the cached + * descriptors and to the data pointer of those descriptors + */ + hw_atl_rdm_rx_dma_desc_cache_init_set(self, 1); + return aq_hw_err_from_flags(self); } diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c index be0a3a90dfad..5502ec5f0f69 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c @@ -619,6 +619,14 @@ void hw_atl_rpb_rx_flow_ctl_mode_set(struct aq_hw_s *aq_hw, u32 rx_flow_ctl_mode HW_ATL_RPB_RX_FC_MODE_SHIFT, rx_flow_ctl_mode); } +void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init) +{ + aq_hw_write_reg_bit(aq_hw, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR, + HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK, + HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT, + init); +} + void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_pkt_buff_size_per_tc, u32 buffer) { diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h index 7056c7342afc..41f239928c15 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h @@ -325,6 +325,9 @@ void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_pkt_buff_size_per_tc, u32 buffer); +/* set rdm rx dma descriptor cache init */ +void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init); + /* set rx xoff enable (per tc) */ void hw_atl_rpb_rx_xoff_en_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_xoff_en_per_tc, u32 buffer); diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h index 716674a9b729..a715fa317b1c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h @@ -293,6 +293,24 @@ /* default value of bitfield desc{d}_reset */ #define HW_ATL_RDM_DESCDRESET_DEFAULT 0x0 +/* rdm_desc_init_i bitfield definitions + * preprocessor definitions for the bitfield rdm_desc_init_i. + * port="pif_rdm_desc_init_i" + */ + +/* register address for bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR 0x00005a00 +/* bitmask for bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK 0xffffffff +/* inverted bitmask for bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSKN 0x00000000 +/* lower bit position of bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT 0 +/* width of bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_WIDTH 32 +/* default value of bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_DEFAULT 0x0 + /* rx int_desc_wrb_en bitfield definitions * preprocessor definitions for the bitfield "int_desc_wrb_en". * port="pif_rdm_int_desc_wrb_en_i" -- cgit v1.2.3-58-ga151 From bfaa9f8553d5c20703781e63f4fc8cb4792f18fd Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Fri, 9 Nov 2018 11:53:59 +0000 Subject: net: aquantia: fixed enable unicast on 32 macvlan Fixed a condition mistake due to which macvlans unicast item number 32 was not added in the unicast filter. The consequence is that when exactly 32 macvlans are created on NIC, the last created macvlan receives no traffic because its MAC was not registered in HW. Fixes: 94b3b542303f ("net: aquantia: vlan unicast address list correct handling") Signed-off-by: Igor Russkikh Tested-by: Nikita Danilov Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 0011a3f2f672..b5e7c98f424c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -600,7 +600,7 @@ int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev) } } - if (i > 0 && i < AQ_HW_MULTICAST_ADDRESS_MAX) { + if (i > 0 && i <= AQ_HW_MULTICAST_ADDRESS_MAX) { packet_filter |= IFF_MULTICAST; self->mc_list.count = i; self->aq_hw_ops->hw_multicast_list_set(self->aq_hw, -- cgit v1.2.3-58-ga151 From ad703c2b9127f9acdef697ec4755f6da4beaa266 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 9 Nov 2018 11:54:01 +0000 Subject: net: aquantia: invalid checksumm offload implementation Packets with marked invalid IP/UDP/TCP checksums were considered as good by the driver. The error was in a logic, processing offload bits in RX descriptor. Signed-off-by: Igor Russkikh Signed-off-by: Dmitry Bogdanov Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 35 +++++++++++++-------- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 36 +++++++++++----------- 2 files changed, 41 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c index 3db91446cc67..74550ccc7a20 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c @@ -172,6 +172,27 @@ bool aq_ring_tx_clean(struct aq_ring_s *self) return !!budget; } +static void aq_rx_checksum(struct aq_ring_s *self, + struct aq_ring_buff_s *buff, + struct sk_buff *skb) +{ + if (!(self->aq_nic->ndev->features & NETIF_F_RXCSUM)) + return; + + if (unlikely(buff->is_cso_err)) { + ++self->stats.rx.errors; + skb->ip_summed = CHECKSUM_NONE; + return; + } + if (buff->is_ip_cso) { + __skb_incr_checksum_unnecessary(skb); + if (buff->is_udp_cso || buff->is_tcp_cso) + __skb_incr_checksum_unnecessary(skb); + } else { + skb->ip_summed = CHECKSUM_NONE; + } +} + #define AQ_SKB_ALIGN SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) int aq_ring_rx_clean(struct aq_ring_s *self, struct napi_struct *napi, @@ -267,18 +288,8 @@ int aq_ring_rx_clean(struct aq_ring_s *self, } skb->protocol = eth_type_trans(skb, ndev); - if (unlikely(buff->is_cso_err)) { - ++self->stats.rx.errors; - skb->ip_summed = CHECKSUM_NONE; - } else { - if (buff->is_ip_cso) { - __skb_incr_checksum_unnecessary(skb); - if (buff->is_udp_cso || buff->is_tcp_cso) - __skb_incr_checksum_unnecessary(skb); - } else { - skb->ip_summed = CHECKSUM_NONE; - } - } + + aq_rx_checksum(self, buff, skb); skb_set_hash(skb, buff->rss_hash, buff->is_hash_l4 ? PKT_HASH_TYPE_L4 : diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 3aec56623bf5..179ce12fe4d8 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -660,9 +660,9 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self, struct hw_atl_rxd_wb_s *rxd_wb = (struct hw_atl_rxd_wb_s *) &ring->dx_ring[ring->hw_head * HW_ATL_B0_RXD_SIZE]; - unsigned int is_err = 1U; unsigned int is_rx_check_sum_enabled = 0U; unsigned int pkt_type = 0U; + u8 rx_stat = 0U; if (!(rxd_wb->status & 0x1U)) { /* RxD is not done */ break; @@ -670,35 +670,35 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self, buff = &ring->buff_ring[ring->hw_head]; - is_err = (0x0000003CU & rxd_wb->status); + rx_stat = (0x0000003CU & rxd_wb->status) >> 2; is_rx_check_sum_enabled = (rxd_wb->type) & (0x3U << 19); - is_err &= ~0x20U; /* exclude validity bit */ pkt_type = 0xFFU & (rxd_wb->type >> 4); - if (is_rx_check_sum_enabled) { - if (0x0U == (pkt_type & 0x3U)) - buff->is_ip_cso = (is_err & 0x08U) ? 0U : 1U; + if (is_rx_check_sum_enabled & BIT(0) && + (0x0U == (pkt_type & 0x3U))) + buff->is_ip_cso = (rx_stat & BIT(1)) ? 0U : 1U; + if (is_rx_check_sum_enabled & BIT(1)) { if (0x4U == (pkt_type & 0x1CU)) - buff->is_udp_cso = buff->is_cso_err ? 0U : 1U; + buff->is_udp_cso = (rx_stat & BIT(2)) ? 0U : + !!(rx_stat & BIT(3)); else if (0x0U == (pkt_type & 0x1CU)) - buff->is_tcp_cso = buff->is_cso_err ? 0U : 1U; - - /* Checksum offload workaround for small packets */ - if (rxd_wb->pkt_len <= 60) { - buff->is_ip_cso = 0U; - buff->is_cso_err = 0U; - } + buff->is_tcp_cso = (rx_stat & BIT(2)) ? 0U : + !!(rx_stat & BIT(3)); + } + buff->is_cso_err = !!(rx_stat & 0x6); + /* Checksum offload workaround for small packets */ + if (unlikely(rxd_wb->pkt_len <= 60)) { + buff->is_ip_cso = 0U; + buff->is_cso_err = 0U; } - - is_err &= ~0x18U; dma_unmap_page(ndev, buff->pa, buff->len, DMA_FROM_DEVICE); - if (is_err || rxd_wb->type & 0x1000U) { - /* status error or DMA error */ + if ((rx_stat & BIT(0)) || rxd_wb->type & 0x1000U) { + /* MAC error or DMA error */ buff->is_error = 1U; } else { if (self->aq_nic_cfg->is_rss) { -- cgit v1.2.3-58-ga151 From bbb67a44baf973da734b9fd61cba4211da240751 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 9 Nov 2018 11:54:03 +0000 Subject: net: aquantia: allow rx checksum offload configuration RX Checksum offloads could not be configured and ignored netdev features flag for checksumming. Signed-off-by: Igor Russkikh Signed-off-by: Dmitry Bogdanov Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 3 +++ drivers/net/ethernet/aquantia/atlantic/aq_main.c | 10 ++++++++-- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 2 +- drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 +- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 7 +++++-- 5 files changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index 7ec8d24b2b0b..a1e70da358ca 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -204,6 +204,9 @@ struct aq_hw_ops { int (*hw_get_fw_version)(struct aq_hw_s *self, u32 *fw_version); + int (*hw_set_offload)(struct aq_hw_s *self, + struct aq_nic_cfg_s *aq_nic_cfg); + int (*hw_set_fc)(struct aq_hw_s *self, u32 fc, u32 tc); }; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index e3ae29e523f0..7c07eef275eb 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -99,8 +99,11 @@ static int aq_ndev_set_features(struct net_device *ndev, struct aq_nic_s *aq_nic = netdev_priv(ndev); struct aq_nic_cfg_s *aq_cfg = aq_nic_get_cfg(aq_nic); bool is_lro = false; + int err = 0; + + aq_cfg->features = features; - if (aq_cfg->hw_features & NETIF_F_LRO) { + if (aq_cfg->aq_hw_caps->hw_features & NETIF_F_LRO) { is_lro = features & NETIF_F_LRO; if (aq_cfg->is_lro != is_lro) { @@ -112,8 +115,11 @@ static int aq_ndev_set_features(struct net_device *ndev, } } } + if ((aq_nic->ndev->features ^ features) & NETIF_F_RXCSUM) + err = aq_nic->aq_hw_ops->hw_set_offload(aq_nic->aq_hw, + aq_cfg); - return 0; + return err; } static int aq_ndev_set_mac_address(struct net_device *ndev, void *addr) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index b5e7c98f424c..7abdc0952425 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -118,7 +118,7 @@ void aq_nic_cfg_start(struct aq_nic_s *self) } cfg->link_speed_msk &= cfg->aq_hw_caps->link_speed_msk; - cfg->hw_features = cfg->aq_hw_caps->hw_features; + cfg->features = cfg->aq_hw_caps->hw_features; } static int aq_nic_update_link_status(struct aq_nic_s *self) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h index c1582f4e8e1b..44ec47a3d60a 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -23,7 +23,7 @@ struct aq_vec_s; struct aq_nic_cfg_s { const struct aq_hw_caps_s *aq_hw_caps; - u64 hw_features; + u64 features; u32 rxds; /* rx ring size, descriptors # */ u32 txds; /* tx ring size, descriptors # */ u32 vecs; /* vecs==allocated irqs */ diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 179ce12fe4d8..f02592f43fe3 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -234,8 +234,10 @@ static int hw_atl_b0_hw_offload_set(struct aq_hw_s *self, hw_atl_tpo_tcp_udp_crc_offload_en_set(self, 1); /* RX checksums offloads*/ - hw_atl_rpo_ipv4header_crc_offload_en_set(self, 1); - hw_atl_rpo_tcp_udp_crc_offload_en_set(self, 1); + hw_atl_rpo_ipv4header_crc_offload_en_set(self, !!(aq_nic_cfg->features & + NETIF_F_RXCSUM)); + hw_atl_rpo_tcp_udp_crc_offload_en_set(self, !!(aq_nic_cfg->features & + NETIF_F_RXCSUM)); /* LSO offloads*/ hw_atl_tdm_large_send_offload_en_set(self, 0xFFFFFFFFU); @@ -974,5 +976,6 @@ const struct aq_hw_ops hw_atl_ops_b0 = { .hw_get_regs = hw_atl_utils_hw_get_regs, .hw_get_hw_stats = hw_atl_utils_get_hw_stats, .hw_get_fw_version = hw_atl_utils_get_fw_version, + .hw_set_offload = hw_atl_b0_hw_offload_set, .hw_set_fc = hw_atl_b0_set_fc, }; -- cgit v1.2.3-58-ga151 From d02854dc1999ed3e7fd79ec700c64ac23ac0c458 Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Fri, 9 Nov 2018 18:56:27 -0700 Subject: net: qualcomm: rmnet: Fix incorrect assignment of real_dev A null dereference was observed when a sysctl was being set from userspace and rmnet was stuck trying to complete some actions in the NETDEV_REGISTER callback. This is because the real_dev is set only after the device registration handler completes. sysctl call stack - <6> Unable to handle kernel NULL pointer dereference at virtual address 00000108 <2> pc : rmnet_vnd_get_iflink+0x1c/0x28 <2> lr : dev_get_iflink+0x2c/0x40 <2> rmnet_vnd_get_iflink+0x1c/0x28 <2> inet6_fill_ifinfo+0x15c/0x234 <2> inet6_ifinfo_notify+0x68/0xd4 <2> ndisc_ifinfo_sysctl_change+0x1b8/0x234 <2> proc_sys_call_handler+0xac/0x100 <2> proc_sys_write+0x3c/0x4c <2> __vfs_write+0x54/0x14c <2> vfs_write+0xcc/0x188 <2> SyS_write+0x60/0xc0 <2> el0_svc_naked+0x34/0x38 device register call stack - <2> notifier_call_chain+0x84/0xbc <2> raw_notifier_call_chain+0x38/0x48 <2> call_netdevice_notifiers_info+0x40/0x70 <2> call_netdevice_notifiers+0x38/0x60 <2> register_netdevice+0x29c/0x3d8 <2> rmnet_vnd_newlink+0x68/0xe8 <2> rmnet_newlink+0xa0/0x160 <2> rtnl_newlink+0x57c/0x6c8 <2> rtnetlink_rcv_msg+0x1dc/0x328 <2> netlink_rcv_skb+0xac/0x118 <2> rtnetlink_rcv+0x24/0x30 <2> netlink_unicast+0x158/0x1f0 <2> netlink_sendmsg+0x32c/0x338 <2> sock_sendmsg+0x44/0x60 <2> SyS_sendto+0x150/0x1ac <2> el0_svc_naked+0x34/0x38 Fixes: b752eff5be24 ("net: qualcomm: rmnet: Implement ndo_get_iflink") Signed-off-by: Sean Tranchetti Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c index 0afc3d335d56..d11c16aeb19a 100644 --- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c +++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c @@ -234,7 +234,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev, struct net_device *real_dev, struct rmnet_endpoint *ep) { - struct rmnet_priv *priv; + struct rmnet_priv *priv = netdev_priv(rmnet_dev); int rc; if (ep->egress_dev) @@ -247,6 +247,8 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev, rmnet_dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; rmnet_dev->hw_features |= NETIF_F_SG; + priv->real_dev = real_dev; + rc = register_netdevice(rmnet_dev); if (!rc) { ep->egress_dev = rmnet_dev; @@ -255,9 +257,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev, rmnet_dev->rtnl_link_ops = &rmnet_link_ops; - priv = netdev_priv(rmnet_dev); priv->mux_id = id; - priv->real_dev = real_dev; netdev_dbg(rmnet_dev, "rmnet dev created\n"); } -- cgit v1.2.3-58-ga151 From fbd1d5245372e48b494120a30fe0b34b304576c4 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 9 Nov 2018 17:37:20 +0100 Subject: net: mvneta: correct typo The reserved variable should be named reserved1. Signed-off-by: Alexandre Belloni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 5bfd349bf41a..3ba672e9e353 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -494,7 +494,7 @@ struct mvneta_port { #if defined(__LITTLE_ENDIAN) struct mvneta_tx_desc { u32 command; /* Options used by HW for packet transmitting.*/ - u16 reserverd1; /* csum_l4 (for future use) */ + u16 reserved1; /* csum_l4 (for future use) */ u16 data_size; /* Data size of transmitted packet in bytes */ u32 buf_phys_addr; /* Physical addr of transmitted buffer */ u32 reserved2; /* hw_cmd - (for future use, PMT) */ @@ -519,7 +519,7 @@ struct mvneta_rx_desc { #else struct mvneta_tx_desc { u16 data_size; /* Data size of transmitted packet in bytes */ - u16 reserverd1; /* csum_l4 (for future use) */ + u16 reserved1; /* csum_l4 (for future use) */ u32 command; /* Options used by HW for packet transmitting.*/ u32 reserved2; /* hw_cmd - (for future use, PMT) */ u32 buf_phys_addr; /* Physical addr of transmitted buffer */ -- cgit v1.2.3-58-ga151 From a9049ff9214da68df1179a7d5e36b43479abc9b8 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 11 Nov 2018 00:41:10 +0100 Subject: net: dsa: mv88e6xxx: Fix clearing of stats counters The mv88e6161 would sometime fail to probe with a timeout waiting for the switch to complete an operation. This operation is supposed to clear the statistics counters. However, due to a read/modify/write, without the needed mask, the operation actually carried out was more random, with invalid parameters, resulting in the switch not responding. We need to preserve the histogram mode bits, so apply a mask to keep them. Reported-by: Chris Healy Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/global1.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c index d721ccf7d8be..38e399e0f30e 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.c +++ b/drivers/net/dsa/mv88e6xxx/global1.c @@ -567,6 +567,8 @@ int mv88e6xxx_g1_stats_clear(struct mv88e6xxx_chip *chip) if (err) return err; + /* Keep the histogram mode bits */ + val &= MV88E6XXX_G1_STATS_OP_HIST_RX_TX; val |= MV88E6XXX_G1_STATS_OP_BUSY | MV88E6XXX_G1_STATS_OP_FLUSH_ALL; err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_STATS_OP, val); -- cgit v1.2.3-58-ga151