From 0265634eb9e04a16ae99941c320718c38eb865e0 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sat, 25 Feb 2017 08:28:16 -0300 Subject: [media] serial_ir: ensure we're ready to receive interrupts When the interrupt requested with devm_request_irq(), serial_ir.rcdev is still null so will cause null deference if the irq handler is called early on. Also ensure that timeout_timer is setup. Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com [mchehab@s-opensource.com: moved serial_ir_probe() back to its original place] Cc: # 4.10 Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/serial_ir.c | 123 ++++++++++++++++++++++--------------------- 1 file changed, 62 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c index 923fb2299553..41b54e40176c 100644 --- a/drivers/media/rc/serial_ir.c +++ b/drivers/media/rc/serial_ir.c @@ -487,10 +487,69 @@ static void serial_ir_timeout(unsigned long arg) ir_raw_event_handle(serial_ir.rcdev); } +/* Needed by serial_ir_probe() */ +static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf, + unsigned int count); +static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle); +static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier); +static int serial_ir_open(struct rc_dev *rcdev); +static void serial_ir_close(struct rc_dev *rcdev); + static int serial_ir_probe(struct platform_device *dev) { + struct rc_dev *rcdev; int i, nlow, nhigh, result; + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW); + if (!rcdev) + return -ENOMEM; + + if (hardware[type].send_pulse && hardware[type].send_space) + rcdev->tx_ir = serial_ir_tx; + if (hardware[type].set_send_carrier) + rcdev->s_tx_carrier = serial_ir_tx_carrier; + if (hardware[type].set_duty_cycle) + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle; + + switch (type) { + case IR_HOMEBREW: + rcdev->input_name = "Serial IR type home-brew"; + break; + case IR_IRDEO: + rcdev->input_name = "Serial IR type IRdeo"; + break; + case IR_IRDEO_REMOTE: + rcdev->input_name = "Serial IR type IRdeo remote"; + break; + case IR_ANIMAX: + rcdev->input_name = "Serial IR type AnimaX"; + break; + case IR_IGOR: + rcdev->input_name = "Serial IR type IgorPlug"; + break; + } + + rcdev->input_phys = KBUILD_MODNAME "/input0"; + rcdev->input_id.bustype = BUS_HOST; + rcdev->input_id.vendor = 0x0001; + rcdev->input_id.product = 0x0001; + rcdev->input_id.version = 0x0100; + rcdev->open = serial_ir_open; + rcdev->close = serial_ir_close; + rcdev->dev.parent = &serial_ir.pdev->dev; + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; + rcdev->driver_name = KBUILD_MODNAME; + rcdev->map_name = RC_MAP_RC6_MCE; + rcdev->min_timeout = 1; + rcdev->timeout = IR_DEFAULT_TIMEOUT; + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; + rcdev->rx_resolution = 250000; + + serial_ir.rcdev = rcdev; + + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout, + (unsigned long)&serial_ir); + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler, share_irq ? IRQF_SHARED : 0, KBUILD_MODNAME, &hardware); @@ -516,9 +575,6 @@ static int serial_ir_probe(struct platform_device *dev) return -EBUSY; } - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout, - (unsigned long)&serial_ir); - result = hardware_init_port(); if (result < 0) return result; @@ -552,7 +608,8 @@ static int serial_ir_probe(struct platform_device *dev) sense ? "low" : "high"); dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io); - return 0; + + return devm_rc_register_device(&dev->dev, rcdev); } static int serial_ir_open(struct rc_dev *rcdev) @@ -723,7 +780,6 @@ static void serial_ir_exit(void) static int __init serial_ir_init_module(void) { - struct rc_dev *rcdev; int result; switch (type) { @@ -754,63 +810,9 @@ static int __init serial_ir_init_module(void) sense = !!sense; result = serial_ir_init(); - if (result) - return result; - - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW); - if (!rcdev) { - result = -ENOMEM; - goto serial_cleanup; - } - - if (hardware[type].send_pulse && hardware[type].send_space) - rcdev->tx_ir = serial_ir_tx; - if (hardware[type].set_send_carrier) - rcdev->s_tx_carrier = serial_ir_tx_carrier; - if (hardware[type].set_duty_cycle) - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle; - - switch (type) { - case IR_HOMEBREW: - rcdev->input_name = "Serial IR type home-brew"; - break; - case IR_IRDEO: - rcdev->input_name = "Serial IR type IRdeo"; - break; - case IR_IRDEO_REMOTE: - rcdev->input_name = "Serial IR type IRdeo remote"; - break; - case IR_ANIMAX: - rcdev->input_name = "Serial IR type AnimaX"; - break; - case IR_IGOR: - rcdev->input_name = "Serial IR type IgorPlug"; - break; - } - - rcdev->input_phys = KBUILD_MODNAME "/input0"; - rcdev->input_id.bustype = BUS_HOST; - rcdev->input_id.vendor = 0x0001; - rcdev->input_id.product = 0x0001; - rcdev->input_id.version = 0x0100; - rcdev->open = serial_ir_open; - rcdev->close = serial_ir_close; - rcdev->dev.parent = &serial_ir.pdev->dev; - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; - rcdev->driver_name = KBUILD_MODNAME; - rcdev->map_name = RC_MAP_RC6_MCE; - rcdev->min_timeout = 1; - rcdev->timeout = IR_DEFAULT_TIMEOUT; - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; - rcdev->rx_resolution = 250000; - - serial_ir.rcdev = rcdev; - - result = rc_register_device(rcdev); - if (!result) return 0; -serial_cleanup: + serial_ir_exit(); return result; } @@ -818,7 +820,6 @@ serial_cleanup: static void __exit serial_ir_exit_module(void) { del_timer_sync(&serial_ir.timeout_timer); - rc_unregister_device(serial_ir.rcdev); serial_ir_exit(); } -- cgit v1.2.3-58-ga151 From db5b15b74ed9a5c04bb808d18ffa2c773f5c18c0 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Mon, 13 Feb 2017 10:35:44 -0200 Subject: [media] lirc: fix dead lock between open and wakeup_filter The locking in lirc needs improvement, but for now just fix this potential deadlock. ====================================================== [ INFO: possible circular locking dependency detected ] 4.10.0-rc1+ #1 Not tainted ------------------------------------------------------- bash/2502 is trying to acquire lock: (ir_raw_handler_lock){+.+.+.}, at: [] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] but task is already holding lock: (&dev->lock){+.+.+.}, at: [] store_filter+0x9f/0x240 [rc_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->lock){+.+.+.}: [] lock_acquire+0xfd/0x200 [] mutex_lock_nested+0x77/0x6d0 [] rc_open+0x2a/0x80 [rc_core] [] lirc_dev_fop_open+0xda/0x1e0 [lirc_dev] [] chrdev_open+0xb0/0x210 [] do_dentry_open+0x20a/0x2f0 [] vfs_open+0x4c/0x80 [] path_openat+0x5bc/0xc00 [] do_filp_open+0x91/0x100 [] do_sys_open+0x130/0x220 [] SyS_open+0x1e/0x20 [] entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #1 (lirc_dev_lock){+.+.+.}: [] lock_acquire+0xfd/0x200 [] mutex_lock_nested+0x77/0x6d0 [] lirc_register_driver+0x67/0x59b [lirc_dev] [] ir_lirc_register+0x1f4/0x260 [ir_lirc_codec] [] ir_raw_handler_register+0x7c/0xb0 [rc_core] [] 0xffffffffc0398010 [] do_one_initcall+0x52/0x1b0 [] do_init_module+0x5f/0x1fa [] load_module+0x2675/0x2b00 [] SYSC_finit_module+0xdf/0x110 [] SyS_finit_module+0xe/0x10 [] do_syscall_64+0x6c/0x1f0 [] return_from_SYSCALL_64+0x0/0x7a -> #0 (ir_raw_handler_lock){+.+.+.}: [] __lock_acquire+0x10f7/0x1290 [] lock_acquire+0xfd/0x200 [] mutex_lock_nested+0x77/0x6d0 [] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] [] loop_set_wakeup_filter+0x62/0xbd [rc_loopback] [] store_filter+0x1aa/0x240 [rc_core] [] dev_attr_store+0x18/0x30 [] sysfs_kf_write+0x45/0x60 [] kernfs_fop_write+0x155/0x1e0 [] __vfs_write+0x37/0x160 [] vfs_write+0xc8/0x1e0 [] SyS_write+0x58/0xc0 [] entry_SYSCALL_64_fastpath+0x1f/0xc2 other info that might help us debug this: Chain exists of: ir_raw_handler_lock --> lirc_dev_lock --> &dev->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->lock); lock(lirc_dev_lock); lock(&dev->lock); lock(ir_raw_handler_lock); *** DEADLOCK *** 4 locks held by bash/2502: #0: (sb_writers#4){.+.+.+}, at: [] vfs_write+0x195/0x1e0 #1: (&of->mutex){+.+.+.}, at: [] kernfs_fop_write+0x11f/0x1e0 #2: (s_active#215){.+.+.+}, at: [] kernfs_fop_write+0x128/0x1e0 #3: (&dev->lock){+.+.+.}, at: [] store_filter+0x9f/0x240 [rc_core] stack backtrace: CPU: 3 PID: 2502 Comm: bash Not tainted 4.10.0-rc1+ #1 Hardware name: /DG45ID, BIOS IDG4510H.86A.0135.2011.0225.1100 02/25/2011 Call Trace: dump_stack+0x86/0xc3 print_circular_bug+0x1be/0x210 __lock_acquire+0x10f7/0x1290 lock_acquire+0xfd/0x200 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] mutex_lock_nested+0x77/0x6d0 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] ? loop_set_wakeup_filter+0x44/0xbd [rc_loopback] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] loop_set_wakeup_filter+0x62/0xbd [rc_loopback] ? loop_set_tx_duty_cycle+0x70/0x70 [rc_loopback] store_filter+0x1aa/0x240 [rc_core] dev_attr_store+0x18/0x30 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x155/0x1e0 __vfs_write+0x37/0x160 ? rcu_read_lock_sched_held+0x4a/0x80 ? rcu_sync_lockdep_assert+0x2f/0x60 ? __sb_start_write+0x10c/0x220 ? vfs_write+0x195/0x1e0 ? security_file_permission+0x3b/0xc0 vfs_write+0xc8/0x1e0 SyS_write+0x58/0xc0 entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/lirc_dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index a54ca531d8ef..4630f3e67538 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -436,6 +436,8 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file) return -ERESTARTSYS; ir = irctls[iminor(inode)]; + mutex_unlock(&lirc_dev_lock); + if (!ir) { retval = -ENODEV; goto error; @@ -476,8 +478,6 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file) } error: - mutex_unlock(&lirc_dev_lock); - nonseekable_open(inode, file); return retval; -- cgit v1.2.3-58-ga151 From c1305a40722f3e02f3d971acc22f5991aff239a6 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 12 Feb 2017 15:01:22 -0200 Subject: [media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes nvt_write_wakeup_codes acquires the same lock as the ISR but doesn't disable interrupts on the local CPU. This caused the following deadlock. Fix this by using spin_lock_irqsave. [ 432.362008] ================================ [ 432.362074] WARNING: inconsistent lock state [ 432.362144] 4.10.0-rc7-next-20170210 #1 Not tainted [ 432.362219] -------------------------------- [ 432.362286] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 432.362379] swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 432.362457] (&(&nvt->lock)->rlock){?.+...}, at: [] nvt_cir_isr+0x2d/0x520 [nuvoton_cir] [ 432.362611] {HARDIRQ-ON-W} state was registered at: [ 432.362686] [ 432.362698] [] __lock_acquire+0x5dc/0x1260 [ 432.362812] [ 432.362817] [] lock_acquire+0xe9/0x1d0 [ 432.362927] [ 432.362934] [] _raw_spin_lock+0x33/0x50 [ 432.363045] [ 432.363051] [] nvt_write_wakeup_codes.isra.12+0x22/0xe0 [nuvoton_cir] [ 432.363193] [ 432.363199] [] wakeup_data_store+0xdf/0xf0 [nuvoton_cir] [ 432.363327] [ 432.363333] [] dev_attr_store+0x13/0x20 [ 432.363441] [ 432.363449] [] sysfs_kf_write+0x40/0x50 [ 432.363558] [ 432.363564] [] kernfs_fop_write+0x150/0x1e0 [ 432.363676] [ 432.363685] [] __vfs_write+0x23/0x120 [ 432.363791] [ 432.363798] [] vfs_write+0xc3/0x1e0 [ 432.363902] [ 432.363909] [] SyS_write+0x44/0xa0 [ 432.364012] [ 432.364021] [] do_syscall_64+0x57/0x140 [ 432.364129] [ 432.364135] [] return_from_SYSCALL_64+0x0/0x7a [ 432.364252] irq event stamp: 415118 [ 432.364313] hardirqs last enabled at (415115): [] cpuidle_enter_state+0x11b/0x370 [ 432.364445] hardirqs last disabled at (415116): [] common_interrupt+0x8b/0x90 [ 432.364573] softirqs last enabled at (415118): [] _local_bh_enable+0x1c/0x50 [ 432.364699] softirqs last disabled at (415117): [] irq_enter+0x43/0x60 [ 432.364814] other info that might help us debug this: [ 432.364909] Possible unsafe locking scenario: [ 432.367821] CPU0 [ 432.370645] ---- [ 432.373432] lock(&(&nvt->lock)->rlock); [ 432.376228] [ 432.378982] lock(&(&nvt->lock)->rlock); [ 432.381757] *** DEADLOCK *** [ 432.389888] no locks held by swapper/0/0. [ 432.392574] stack backtrace: [ 432.397774] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc7-next-20170210 #1 [ 432.400375] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [ 432.403023] Call Trace: [ 432.405636] [ 432.408208] dump_stack+0x68/0x93 [ 432.410775] print_usage_bug+0x1dd/0x1f0 [ 432.413334] mark_lock+0x559/0x5c0 [ 432.415871] ? print_shortest_lock_dependencies+0x1a0/0x1a0 [ 432.418431] __lock_acquire+0x6b1/0x1260 [ 432.420941] lock_acquire+0xe9/0x1d0 [ 432.423396] ? nvt_cir_isr+0x2d/0x520 [nuvoton_cir] [ 432.425844] _raw_spin_lock+0x33/0x50 [ 432.428252] ? nvt_cir_isr+0x2d/0x520 [nuvoton_cir] [ 432.430670] nvt_cir_isr+0x2d/0x520 [nuvoton_cir] [ 432.433085] __handle_irq_event_percpu+0x43/0x330 [ 432.435493] handle_irq_event_percpu+0x1e/0x50 [ 432.437884] handle_irq_event+0x34/0x60 [ 432.440236] handle_edge_irq+0x6a/0x150 [ 432.442561] handle_irq+0x15/0x20 [ 432.444854] do_IRQ+0x57/0x110 [ 432.447115] common_interrupt+0x90/0x90 [ 432.449380] RIP: 0010:cpuidle_enter_state+0x120/0x370 [ 432.451653] RSP: 0018:ffffffff81c03dd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffffcc [ 432.453994] RAX: ffffffff81c14500 RBX: 0000000000000008 RCX: 00000064aac6f2d2 [ 432.456349] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff81c14500 [ 432.458704] RBP: ffffffff81c03e18 R08: cccccccccccccccd R09: 0000000000000018 [ 432.461072] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880100a21260 [ 432.463450] R13: ffffffff81c7e6f8 R14: 0000000000000008 R15: ffffffff81c7e6e0 [ 432.465819] [ 432.468104] ? cpuidle_enter_state+0x11b/0x370 [ 432.470413] cpuidle_enter+0x12/0x20 [ 432.472698] call_cpuidle+0x1e/0x40 [ 432.474967] do_idle+0xe3/0x1c0 [ 432.477172] cpu_startup_entry+0x18/0x20 [ 432.479376] rest_init+0x130/0x140 [ 432.481565] start_kernel+0x3cc/0x3d9 [ 432.483750] x86_64_start_reservations+0x2a/0x2c [ 432.485980] x86_64_start_kernel+0x178/0x18b [ 432.488222] start_cpu+0x14/0x14 [ 432.490453] ? start_cpu+0x14/0x14 Fixes: 97c129747af5 "[media] rc: nuvoton-cir: Add support wakeup via sysfs filter callback" Signed-off-by: Heiner Kallweit Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/nuvoton-cir.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index b109f8246b96..ec4b25bd2ec2 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -176,12 +176,13 @@ static void nvt_write_wakeup_codes(struct rc_dev *dev, { u8 tolerance, config; struct nvt_dev *nvt = dev->priv; + unsigned long flags; int i; /* hardcode the tolerance to 10% */ tolerance = DIV_ROUND_UP(count, 10); - spin_lock(&nvt->lock); + spin_lock_irqsave(&nvt->lock, flags); nvt_clear_cir_wake_fifo(nvt); nvt_cir_wake_reg_write(nvt, count, CIR_WAKE_FIFO_CMP_DEEP); @@ -203,7 +204,7 @@ static void nvt_write_wakeup_codes(struct rc_dev *dev, nvt_cir_wake_reg_write(nvt, config, CIR_WAKE_IRCON); - spin_unlock(&nvt->lock); + spin_unlock_irqrestore(&nvt->lock, flags); } static ssize_t wakeup_data_show(struct device *dev, -- cgit v1.2.3-58-ga151 From 413808685dd7c9b54bbc5af79da2eaddd0fc3cb2 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Wed, 22 Feb 2017 18:48:01 -0300 Subject: [media] rc: raw decoder for keymap protocol is not loaded on register When the protocol is set via the sysfs protocols attribute, the decoder is loaded. However, when it is not when a device is first plugged in or registered. Fixes: acc1c3c ("[media] media: rc: load decoder modules on-demand") Signed-off-by: Sean Young Cc: # v4.5+ Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 2424946740e6..a158b321b40a 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1663,6 +1663,7 @@ static int rc_setup_rx_device(struct rc_dev *dev) { int rc; struct rc_map *rc_map; + u64 rc_type; if (!dev->map_name) return -EINVAL; @@ -1677,15 +1678,18 @@ static int rc_setup_rx_device(struct rc_dev *dev) if (rc) return rc; - if (dev->change_protocol) { - u64 rc_type = (1ll << rc_map->rc_type); + rc_type = BIT_ULL(rc_map->rc_type); + if (dev->change_protocol) { rc = dev->change_protocol(dev, &rc_type); if (rc < 0) goto out_table; dev->enabled_protocols = rc_type; } + if (dev->driver_type == RC_DRIVER_IR_RAW) + ir_raw_load_modules(&rc_type); + set_bit(EV_KEY, dev->input_dev->evbit); set_bit(EV_REP, dev->input_dev->evbit); set_bit(EV_MSC, dev->input_dev->evbit); -- cgit v1.2.3-58-ga151 From 5df62771c556e4ec9d7ecea1f070ff6da4bce151 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Thu, 23 Feb 2017 06:11:21 -0300 Subject: [media] rc: protocol is not set on register for raw IR devices ir_raw_event_register() sets up change_protocol(), and without that set, rc_setup_rx_device() does not set the protocol for the device on register. The standard udev rules run ir-keytable, which writes to the protocols file again, which hides this problem. Fixes: 7ff2c2b ("[media] rc-main: split setup and unregister functions") Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index a158b321b40a..d84533699668 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1781,12 +1781,6 @@ int rc_register_device(struct rc_dev *dev) dev->input_name ?: "Unspecified device", path ?: "N/A"); kfree(path); - if (dev->driver_type != RC_DRIVER_IR_RAW_TX) { - rc = rc_setup_rx_device(dev); - if (rc) - goto out_dev; - } - if (dev->driver_type == RC_DRIVER_IR_RAW || dev->driver_type == RC_DRIVER_IR_RAW_TX) { if (!raw_init) { @@ -1795,7 +1789,13 @@ int rc_register_device(struct rc_dev *dev) } rc = ir_raw_event_register(dev); if (rc < 0) - goto out_rx; + goto out_dev; + } + + if (dev->driver_type != RC_DRIVER_IR_RAW_TX) { + rc = rc_setup_rx_device(dev); + if (rc) + goto out_raw; } /* Allow the RC sysfs nodes to be accessible */ @@ -1807,8 +1807,8 @@ int rc_register_device(struct rc_dev *dev) return 0; -out_rx: - rc_free_rx_device(dev); +out_raw: + ir_raw_event_unregister(dev); out_dev: device_del(&dev->dev); out_unlock: -- cgit v1.2.3-58-ga151 From 606142af57dad981b78707234cfbd15f9f7b7125 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Wed, 15 Feb 2017 18:29:15 -0200 Subject: [media] dw2102: don't do DMA on stack On Kernel 4.9, WARNINGs about doing DMA on stack are hit at the dw2102 driver: one in su3000_power_ctrl() and the other in tt_s2_4600_frontend_attach(). Both were due to the use of buffers on the stack as parameters to dvb_usb_generic_rw() and the resulting attempt to do DMA with them. The device was non-functional as a result. So, switch this driver over to use a buffer within the device state structure, as has been done with other DVB-USB drivers. Tested with TechnoTrend TT-connect S2-4600. [mchehab@osg.samsung.com: fixed a warning at su3000_i2c_transfer() that state var were dereferenced before check 'd'] Signed-off-by: Jonathan McDowell Cc: Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dw2102.c | 244 ++++++++++++++++++++++--------------- 1 file changed, 145 insertions(+), 99 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 6ca502d834b4..4f42d57f81d9 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -68,6 +68,7 @@ struct dw2102_state { u8 initialized; u8 last_lock; + u8 data[MAX_XFER_SIZE + 4]; struct i2c_client *i2c_client_demod; struct i2c_client *i2c_client_tuner; @@ -661,62 +662,72 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); - u8 obuf[0x40], ibuf[0x40]; + struct dw2102_state *state; if (!d) return -ENODEV; + + state = d->priv; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; + if (mutex_lock_interruptible(&d->data_mutex) < 0) { + mutex_unlock(&d->i2c_mutex); + return -EAGAIN; + } switch (num) { case 1: switch (msg[0].addr) { case SU3000_STREAM_CTRL: - obuf[0] = msg[0].buf[0] + 0x36; - obuf[1] = 3; - obuf[2] = 0; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0) + state->data[0] = msg[0].buf[0] + 0x36; + state->data[1] = 3; + state->data[2] = 0; + if (dvb_usb_generic_rw(d, state->data, 3, + state->data, 0, 0) < 0) err("i2c transfer failed."); break; case DW2102_RC_QUERY: - obuf[0] = 0x10; - if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0) + state->data[0] = 0x10; + if (dvb_usb_generic_rw(d, state->data, 1, + state->data, 2, 0) < 0) err("i2c transfer failed."); - msg[0].buf[1] = ibuf[0]; - msg[0].buf[0] = ibuf[1]; + msg[0].buf[1] = state->data[0]; + msg[0].buf[0] = state->data[1]; break; default: /* always i2c write*/ - obuf[0] = 0x08; - obuf[1] = msg[0].addr; - obuf[2] = msg[0].len; + state->data[0] = 0x08; + state->data[1] = msg[0].addr; + state->data[2] = msg[0].len; - memcpy(&obuf[3], msg[0].buf, msg[0].len); + memcpy(&state->data[3], msg[0].buf, msg[0].len); - if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3, - ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, msg[0].len + 3, + state->data, 1, 0) < 0) err("i2c transfer failed."); } break; case 2: /* always i2c read */ - obuf[0] = 0x09; - obuf[1] = msg[0].len; - obuf[2] = msg[1].len; - obuf[3] = msg[0].addr; - memcpy(&obuf[4], msg[0].buf, msg[0].len); - - if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4, - ibuf, msg[1].len + 1, 0) < 0) + state->data[0] = 0x09; + state->data[1] = msg[0].len; + state->data[2] = msg[1].len; + state->data[3] = msg[0].addr; + memcpy(&state->data[4], msg[0].buf, msg[0].len); + + if (dvb_usb_generic_rw(d, state->data, msg[0].len + 4, + state->data, msg[1].len + 1, 0) < 0) err("i2c transfer failed."); - memcpy(msg[1].buf, &ibuf[1], msg[1].len); + memcpy(msg[1].buf, &state->data[1], msg[1].len); break; default: warn("more than 2 i2c messages at a time is not handled yet."); break; } + mutex_unlock(&d->data_mutex); mutex_unlock(&d->i2c_mutex); return num; } @@ -844,17 +855,23 @@ static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) static int su3000_power_ctrl(struct dvb_usb_device *d, int i) { struct dw2102_state *state = (struct dw2102_state *)d->priv; - u8 obuf[] = {0xde, 0}; + int ret = 0; info("%s: %d, initialized %d", __func__, i, state->initialized); if (i && !state->initialized) { + mutex_lock(&d->data_mutex); + + state->data[0] = 0xde; + state->data[1] = 0; + state->initialized = 1; /* reset board */ - return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); + ret = dvb_usb_generic_rw(d, state->data, 2, NULL, 0, 0); + mutex_unlock(&d->data_mutex); } - return 0; + return ret; } static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) @@ -1309,49 +1326,57 @@ static int prof_7500_frontend_attach(struct dvb_usb_adapter *d) return 0; } -static int su3000_frontend_attach(struct dvb_usb_adapter *d) +static int su3000_frontend_attach(struct dvb_usb_adapter *adap) { - u8 obuf[3] = { 0xe, 0x80, 0 }; - u8 ibuf[] = { 0 }; + struct dvb_usb_device *d = adap->dev; + struct dw2102_state *state = d->priv; + + mutex_lock(&d->data_mutex); + + state->data[0] = 0xe; + state->data[1] = 0x80; + state->data[2] = 0; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x02; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x02; + state->data[2] = 1; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); msleep(300); - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 0; + state->data[0] = 0xe; + state->data[1] = 0x83; + state->data[2] = 0; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x83; + state->data[2] = 1; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0x51; + state->data[0] = 0x51; - if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0) err("command 0x51 transfer failed."); - d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe == NULL) + mutex_unlock(&d->data_mutex); + + adap->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config, + &d->i2c_adap); + if (adap->fe_adap[0].fe == NULL) return -EIO; - if (dvb_attach(ts2020_attach, d->fe_adap[0].fe, + if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe, &dw2104_ts2020_config, - &d->dev->i2c_adap)) { + &d->i2c_adap)) { info("Attached DS3000/TS2020!"); return 0; } @@ -1360,47 +1385,55 @@ static int su3000_frontend_attach(struct dvb_usb_adapter *d) return -EIO; } -static int t220_frontend_attach(struct dvb_usb_adapter *d) +static int t220_frontend_attach(struct dvb_usb_adapter *adap) { - u8 obuf[3] = { 0xe, 0x87, 0 }; - u8 ibuf[] = { 0 }; + struct dvb_usb_device *d = adap->dev; + struct dw2102_state *state = d->priv; + + mutex_lock(&d->data_mutex); - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + state->data[0] = 0xe; + state->data[1] = 0x87; + state->data[2] = 0x0; + + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x86; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x86; + state->data[2] = 1; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x80; - obuf[2] = 0; + state->data[0] = 0xe; + state->data[1] = 0x80; + state->data[2] = 0; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); msleep(50); - obuf[0] = 0xe; - obuf[1] = 0x80; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x80; + state->data[2] = 1; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0x51; + state->data[0] = 0x51; - if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0) err("command 0x51 transfer failed."); - d->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config, - &d->dev->i2c_adap, NULL); - if (d->fe_adap[0].fe != NULL) { - if (dvb_attach(tda18271_attach, d->fe_adap[0].fe, 0x60, - &d->dev->i2c_adap, &tda18271_config)) { + mutex_unlock(&d->data_mutex); + + adap->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config, + &d->i2c_adap, NULL); + if (adap->fe_adap[0].fe != NULL) { + if (dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0x60, + &d->i2c_adap, &tda18271_config)) { info("Attached TDA18271HD/CXD2820R!"); return 0; } @@ -1410,23 +1443,30 @@ static int t220_frontend_attach(struct dvb_usb_adapter *d) return -EIO; } -static int m88rs2000_frontend_attach(struct dvb_usb_adapter *d) +static int m88rs2000_frontend_attach(struct dvb_usb_adapter *adap) { - u8 obuf[] = { 0x51 }; - u8 ibuf[] = { 0 }; + struct dvb_usb_device *d = adap->dev; + struct dw2102_state *state = d->priv; + + mutex_lock(&d->data_mutex); - if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) + state->data[0] = 0x51; + + if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0) err("command 0x51 transfer failed."); - d->fe_adap[0].fe = dvb_attach(m88rs2000_attach, &s421_m88rs2000_config, - &d->dev->i2c_adap); + mutex_unlock(&d->data_mutex); - if (d->fe_adap[0].fe == NULL) + adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach, + &s421_m88rs2000_config, + &d->i2c_adap); + + if (adap->fe_adap[0].fe == NULL) return -EIO; - if (dvb_attach(ts2020_attach, d->fe_adap[0].fe, + if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe, &dw2104_ts2020_config, - &d->dev->i2c_adap)) { + &d->i2c_adap)) { info("Attached RS2000/TS2020!"); return 0; } @@ -1439,44 +1479,50 @@ static int tt_s2_4600_frontend_attach(struct dvb_usb_adapter *adap) { struct dvb_usb_device *d = adap->dev; struct dw2102_state *state = d->priv; - u8 obuf[3] = { 0xe, 0x80, 0 }; - u8 ibuf[] = { 0 }; struct i2c_adapter *i2c_adapter; struct i2c_client *client; struct i2c_board_info board_info; struct m88ds3103_platform_data m88ds3103_pdata = {}; struct ts2020_config ts2020_config = {}; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0) + mutex_lock(&d->data_mutex); + + state->data[0] = 0xe; + state->data[1] = 0x80; + state->data[2] = 0x0; + + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x02; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x02; + state->data[2] = 1; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); msleep(300); - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 0; + state->data[0] = 0xe; + state->data[1] = 0x83; + state->data[2] = 0; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x83; + state->data[2] = 1; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0x51; + state->data[0] = 0x51; - if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0) err("command 0x51 transfer failed."); + mutex_unlock(&d->data_mutex); + /* attach demod */ m88ds3103_pdata.clk = 27000000; m88ds3103_pdata.i2c_wr_max = 33; -- cgit v1.2.3-58-ga151 From 8c71fff434e5ecf5ff27bd61db1bc9ac4c2b2a1b Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Fri, 3 Mar 2017 06:31:48 -0300 Subject: [media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure The interface to configure the LIF in the VSP1 requires adapting the function prototype for any changes. This makes extending the interface difficult. Change the function prototype to pass a structure which can be easily extended. This changes the means of disabling the pipeline, by now passing a NULL configuration rather than passing either a 0 width or height. [Fixed kerneldoc, made vsp1_du_setup_lif() cfg argument const] Signed-off-by: Kieran Bingham Signed-off-by: Laurent Pinchart Acked-by: Dave Airlie Signed-off-by: Mauro Carvalho Chehab --- drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 8 ++++++-- drivers/media/platform/vsp1/vsp1_drm.c | 33 ++++++++++++++++----------------- include/media/vsp1.h | 13 +++++++++++-- 3 files changed, 33 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index 83ebd162f3ef..22da2d671297 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c @@ -32,6 +32,10 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) { const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode; struct rcar_du_device *rcdu = crtc->group->dev; + struct vsp1_du_lif_config cfg = { + .width = mode->hdisplay, + .height = mode->vdisplay, + }; struct rcar_du_plane_state state = { .state = { .crtc = &crtc->crtc, @@ -66,12 +70,12 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) */ crtc->group->need_restart = true; - vsp1_du_setup_lif(crtc->vsp->vsp, mode->hdisplay, mode->vdisplay); + vsp1_du_setup_lif(crtc->vsp->vsp, &cfg); } void rcar_du_vsp_disable(struct rcar_du_crtc *crtc) { - vsp1_du_setup_lif(crtc->vsp->vsp, 0, 0); + vsp1_du_setup_lif(crtc->vsp->vsp, NULL); } void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc) diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c index b4b583f7137a..b4c0f10fc3b0 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.c +++ b/drivers/media/platform/vsp1/vsp1_drm.c @@ -54,12 +54,11 @@ EXPORT_SYMBOL_GPL(vsp1_du_init); /** * vsp1_du_setup_lif - Setup the output part of the VSP pipeline * @dev: the VSP device - * @width: output frame width in pixels - * @height: output frame height in pixels + * @cfg: the LIF configuration * - * Configure the output part of VSP DRM pipeline for the given frame @width and - * @height. This sets up formats on the BRU source pad, the WPF0 sink and source - * pads, and the LIF sink pad. + * Configure the output part of VSP DRM pipeline for the given frame @cfg.width + * and @cfg.height. This sets up formats on the BRU source pad, the WPF0 sink + * and source pads, and the LIF sink pad. * * As the media bus code on the BRU source pad is conditioned by the * configuration of the BRU sink 0 pad, we also set up the formats on all BRU @@ -69,8 +68,7 @@ EXPORT_SYMBOL_GPL(vsp1_du_init); * * Return 0 on success or a negative error code on failure. */ -int vsp1_du_setup_lif(struct device *dev, unsigned int width, - unsigned int height) +int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg) { struct vsp1_device *vsp1 = dev_get_drvdata(dev); struct vsp1_pipeline *pipe = &vsp1->drm->pipe; @@ -79,11 +77,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, unsigned int i; int ret; - dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n", - __func__, width, height); - - if (width == 0 || height == 0) { - /* Zero width or height means the CRTC is being disabled, stop + if (!cfg) { + /* NULL configuration means the CRTC is being disabled, stop * the pipeline and turn the light off. */ ret = vsp1_pipeline_stop(pipe); @@ -108,6 +103,9 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, return 0; } + dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n", + __func__, cfg->width, cfg->height); + /* Configure the format at the BRU sinks and propagate it through the * pipeline. */ @@ -117,8 +115,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, for (i = 0; i < bru->entity.source_pad; ++i) { format.pad = i; - format.format.width = width; - format.format.height = height; + format.format.width = cfg->width; + format.format.height = cfg->height; format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32; format.format.field = V4L2_FIELD_NONE; @@ -133,8 +131,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, } format.pad = bru->entity.source_pad; - format.format.width = width; - format.format.height = height; + format.format.width = cfg->width; + format.format.height = cfg->height; format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32; format.format.field = V4L2_FIELD_NONE; @@ -180,7 +178,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, /* Verify that the format at the output of the pipeline matches the * requested frame size and media bus code. */ - if (format.format.width != width || format.format.height != height || + if (format.format.width != cfg->width || + format.format.height != cfg->height || format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) { dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__); return -EPIPE; diff --git a/include/media/vsp1.h b/include/media/vsp1.h index 458b400373d4..38aac554dbba 100644 --- a/include/media/vsp1.h +++ b/include/media/vsp1.h @@ -20,8 +20,17 @@ struct device; int vsp1_du_init(struct device *dev); -int vsp1_du_setup_lif(struct device *dev, unsigned int width, - unsigned int height); +/** + * struct vsp1_du_lif_config - VSP LIF configuration + * @width: output frame width + * @height: output frame height + */ +struct vsp1_du_lif_config { + unsigned int width; + unsigned int height; +}; + +int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg); struct vsp1_du_atomic_config { u32 pixelformat; -- cgit v1.2.3-58-ga151