From 2b6a761be079f9fa8abf3157b5679a6f38885db4 Mon Sep 17 00:00:00 2001 From: ChiYuan Huang Date: Sat, 26 Jun 2021 23:58:32 +0800 Subject: regulator: rtmv20: Fix wrong mask for strobe-polarity-high Fix wrong mask for strobe-polarity-high. Signed-off-by: ChiYuan Huang In-reply-to: Reviewed-by: Axel Lin Link: https://lore.kernel.org/r/1624723112-26653-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown --- drivers/regulator/rtmv20-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/rtmv20-regulator.c b/drivers/regulator/rtmv20-regulator.c index 852fb2596ffd..d7372599385e 100644 --- a/drivers/regulator/rtmv20-regulator.c +++ b/drivers/regulator/rtmv20-regulator.c @@ -36,7 +36,7 @@ #define RTMV20_WIDTH2_MASK GENMASK(7, 0) #define RTMV20_LBPLVL_MASK GENMASK(3, 0) #define RTMV20_LBPEN_MASK BIT(7) -#define RTMV20_STROBEPOL_MASK BIT(1) +#define RTMV20_STROBEPOL_MASK BIT(0) #define RTMV20_VSYNPOL_MASK BIT(1) #define RTMV20_FSINEN_MASK BIT(7) #define RTMV20_ESEN_MASK BIT(6) -- cgit v1.2.3-58-ga151 From 5db5dd5be70eaf808d9fd90174b957fc5c2912cb Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 30 Jun 2021 15:42:46 +0800 Subject: regulator: hi6421v600: Fix getting wrong drvdata that causes boot failure Since config.dev = pdev->dev.parent in current code, so dev_get_drvdata(rdev->dev.parent) actually returns the drvdata of the mfd device rather than the regulator. Fix it. Fixes: 9bc146acc331 ("regulator: hi6421v600: Fix setting wrong driver_data") Reported-by: Mauro Carvalho Chehab Signed-off-by: Axel Lin Tested-by: Mauro Carvalho Chehab Reviewed-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/20210630074246.2305166-1-axel.lin@ingics.com Signed-off-by: Mark Brown --- drivers/regulator/hi6421v600-regulator.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c index 48922704f0e1..a8501e8720d0 100644 --- a/drivers/regulator/hi6421v600-regulator.c +++ b/drivers/regulator/hi6421v600-regulator.c @@ -98,10 +98,9 @@ static const unsigned int ldo34_voltages[] = { static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev) { - struct hi6421_spmi_reg_priv *priv; + struct hi6421_spmi_reg_priv *priv = rdev_get_drvdata(rdev); int ret; - priv = dev_get_drvdata(rdev->dev.parent); /* cannot enable more than one regulator at one time */ mutex_lock(&priv->enable_mutex); @@ -119,9 +118,10 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev) static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev) { - struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev); + struct hi6421_spmi_reg_info *sreg; unsigned int reg_val; + sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc); regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val); if (reg_val & sreg->eco_mode_mask) @@ -133,9 +133,10 @@ static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev) static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode) { - struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev); + struct hi6421_spmi_reg_info *sreg; unsigned int val; + sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc); switch (mode) { case REGULATOR_MODE_NORMAL: val = 0; @@ -159,7 +160,9 @@ hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev, int input_uV, int output_uV, int load_uA) { - struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev); + struct hi6421_spmi_reg_info *sreg; + + sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc); if (!sreg->eco_uA || ((unsigned int)load_uA > sreg->eco_uA)) return REGULATOR_MODE_NORMAL; @@ -252,13 +255,12 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev) return -ENOMEM; mutex_init(&priv->enable_mutex); - platform_set_drvdata(pdev, priv); for (i = 0; i < ARRAY_SIZE(regulator_info); i++) { info = ®ulator_info[i]; config.dev = pdev->dev.parent; - config.driver_data = info; + config.driver_data = priv; config.regmap = pmic->regmap; rdev = devm_regulator_register(dev, &info->desc, &config); -- cgit v1.2.3-58-ga151 From e4a5c19888a5f8a9390860ca493e643be58c8791 Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Wed, 30 Jun 2021 10:45:19 +0200 Subject: spi: stm32h7: fix full duplex irq handler handling In case of Full-Duplex mode, DXP flag is set when RXP and TXP flags are set. But to avoid 2 different handlings, just add TXP and RXP flag in the mask instead of DXP, and then keep the initial handling of TXP and RXP events. Also rephrase comment about EOTIE which is one of the interrupt enable bits. It is not triggered by any event. Signed-off-by: Amelie Delaunay Signed-off-by: Alain Volmat Reviewed-by: Amelie Delaunay Link: https://lore.kernel.org/r/1625042723-661-3-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown --- drivers/spi/spi-stm32.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 8ffcffbb8157..65b37c8dc49f 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -884,15 +884,18 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) ier = readl_relaxed(spi->base + STM32H7_SPI_IER); mask = ier; - /* EOTIE is triggered on EOT, SUSP and TXC events. */ + /* + * EOTIE enables irq from EOT, SUSP and TXC events. We need to set + * SUSP to acknowledge it later. TXC is automatically cleared + */ + mask |= STM32H7_SPI_SR_SUSP; /* - * When TXTF is set, DXPIE and TXPIE are cleared. So in case of - * Full-Duplex, need to poll RXP event to know if there are remaining - * data, before disabling SPI. + * DXPIE is set in Full-Duplex, one IT will be raised if TXP and RXP + * are set. So in case of Full-Duplex, need to poll TXP and RXP event. */ - if (spi->rx_buf && !spi->cur_usedma) - mask |= STM32H7_SPI_SR_RXP; + if ((spi->cur_comm == SPI_FULL_DUPLEX) && !spi->cur_usedma) + mask |= STM32H7_SPI_SR_TXP | STM32H7_SPI_SR_RXP; if (!(sr & mask)) { dev_warn(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n", -- cgit v1.2.3-58-ga151 From 8888ef2304d0ae78f3d5ec19653fa7cc4ffdbd7a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 23 Jun 2021 23:34:43 +0800 Subject: regulator: bd9576: Fix testing wrong flag in check_temp_flag_mismatch Fix trivial copy-paste typo. Signed-off-by: Axel Lin Reviewed-by: Matti Vaittinen Link: https://lore.kernel.org/r/20210623153443.623856-1-axel.lin@ingics.com Signed-off-by: Mark Brown --- drivers/regulator/bd9576-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c index e16c3727db7a..aa42da4d141e 100644 --- a/drivers/regulator/bd9576-regulator.c +++ b/drivers/regulator/bd9576-regulator.c @@ -294,9 +294,9 @@ static bool check_temp_flag_mismatch(struct regulator_dev *rdev, int severity, struct bd957x_regulator_data *r) { if ((severity == REGULATOR_SEVERITY_ERR && - r->ovd_notif != REGULATOR_EVENT_OVER_TEMP) || + r->temp_notif != REGULATOR_EVENT_OVER_TEMP) || (severity == REGULATOR_SEVERITY_WARN && - r->ovd_notif != REGULATOR_EVENT_OVER_TEMP_WARN)) { + r->temp_notif != REGULATOR_EVENT_OVER_TEMP_WARN)) { dev_warn(rdev_get_dev(rdev), "Can't support both thermal WARN and ERR\n"); if (severity == REGULATOR_SEVERITY_WARN) -- cgit v1.2.3-58-ga151 From c36748ac545421d94a5091c754414c0f3664bf10 Mon Sep 17 00:00:00 2001 From: Jérôme Glisse Date: Thu, 1 Jul 2021 08:28:25 -0700 Subject: misc: eeprom: at24: Always append device id even if label property is set. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to append device id even if eeprom have a label property set as some platform can have multiple eeproms with same label and we can not register each of those with same label. Failing to register those eeproms trigger cascade failures on such platform (system is no longer working). This fix regression on such platform introduced with 4e302c3b568e Reported-by: Alexander Fomichev Fixes: 4e302c3b568e ("misc: eeprom: at24: fix NVMEM name with custom AT24 device name") Cc: stable@vger.kernel.org Signed-off-by: Jérôme Glisse Signed-off-by: Bartosz Golaszewski --- drivers/misc/eeprom/at24.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 7a6f01ace78a..305ffad131a2 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -714,23 +714,20 @@ static int at24_probe(struct i2c_client *client) } /* - * If the 'label' property is not present for the AT24 EEPROM, - * then nvmem_config.id is initialised to NVMEM_DEVID_AUTO, - * and this will append the 'devid' to the name of the NVMEM - * device. This is purely legacy and the AT24 driver has always - * defaulted to this. However, if the 'label' property is - * present then this means that the name is specified by the - * firmware and this name should be used verbatim and so it is - * not necessary to append the 'devid'. + * We initialize nvmem_config.id to NVMEM_DEVID_AUTO even if the + * label property is set as some platform can have multiple eeproms + * with same label and we can not register each of those with same + * label. Failing to register those eeproms trigger cascade failure + * on such platform. */ + nvmem_config.id = NVMEM_DEVID_AUTO; + if (device_property_present(dev, "label")) { - nvmem_config.id = NVMEM_DEVID_NONE; err = device_property_read_string(dev, "label", &nvmem_config.name); if (err) return err; } else { - nvmem_config.id = NVMEM_DEVID_AUTO; nvmem_config.name = dev_name(dev); } -- cgit v1.2.3-58-ga151 From 56ea7ed103b46970e171eb1c95916f393d64eeff Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Thu, 13 May 2021 17:31:03 -0700 Subject: igc: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igc_poll() runs while the controller is being reset this can lead to the driver try to free a skb that was already freed. Log message: [ 101.525242] refcount_t: underflow; use-after-free. [ 101.525251] WARNING: CPU: 1 PID: 646 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0 [ 101.525259] Modules linked in: sch_etf(E) sch_mqprio(E) rfkill(E) intel_rapl_msr(E) intel_rapl_common(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) binfmt_misc(E) kvm_intel(E) kvm(E) irqbypass(E) crc32_pclmul(E) ghash_clmulni_intel(E) aesni_intel(E) mei_wdt(E) libaes(E) crypto_simd(E) cryptd(E) glue_helper(E) snd_hda_codec_hdmi(E) rapl(E) intel_cstate(E) snd_hda_intel(E) snd_intel_dspcfg(E) sg(E) soundwire_intel(E) intel_uncore(E) at24(E) soundwire_generic_allocation(E) iTCO_wdt(E) soundwire_cadence(E) intel_pmc_bxt(E) serio_raw(E) snd_hda_codec(E) iTCO_vendor_support(E) watchdog(E) snd_hda_core(E) snd_hwdep(E) snd_soc_core(E) snd_compress(E) snd_pcsp(E) soundwire_bus(E) snd_pcm(E) evdev(E) snd_timer(E) mei_me(E) snd(E) soundcore(E) mei(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) t10_pi(E) crc_t10dif(E) crct10dif_generic(E) i915(E) ahci(E) libahci(E) ehci_pci(E) igb(E) xhci_pci(E) ehci_hcd(E) [ 101.525303] drm_kms_helper(E) dca(E) xhci_hcd(E) libata(E) crct10dif_pclmul(E) cec(E) crct10dif_common(E) tsn(E) igc(E) e1000e(E) ptp(E) i2c_i801(E) crc32c_intel(E) psmouse(E) i2c_algo_bit(E) i2c_smbus(E) scsi_mod(E) lpc_ich(E) pps_core(E) usbcore(E) drm(E) button(E) video(E) [ 101.525318] CPU: 1 PID: 646 Comm: irq/37-enp7s0-T Tainted: G E 5.10.30-rt37-tsn1-rt-ipipe #ipipe [ 101.525320] Hardware name: SIEMENS AG SIMATIC IPC427D/A5E31233588, BIOS V17.02.09 03/31/2017 [ 101.525322] RIP: 0010:refcount_warn_saturate+0xab/0xf0 [ 101.525325] Code: 05 31 48 44 01 01 e8 f0 c6 42 00 0f 0b c3 80 3d 1f 48 44 01 00 75 90 48 c7 c7 78 a8 f3 a6 c6 05 0f 48 44 01 01 e8 d1 c6 42 00 <0f> 0b c3 80 3d fe 47 44 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 a8 f3 [ 101.525327] RSP: 0018:ffffbdedc0917cb8 EFLAGS: 00010286 [ 101.525329] RAX: 0000000000000000 RBX: ffff98fd6becbf40 RCX: 0000000000000001 [ 101.525330] RDX: 0000000000000001 RSI: ffffffffa6f2700c RDI: 00000000ffffffff [ 101.525332] RBP: ffff98fd6becc14c R08: ffffffffa7463d00 R09: ffffbdedc0917c50 [ 101.525333] R10: ffffffffa74c3578 R11: 0000000000000034 R12: 00000000ffffff00 [ 101.525335] R13: ffff98fd6b0b1000 R14: 0000000000000039 R15: ffff98fd6be35c40 [ 101.525337] FS: 0000000000000000(0000) GS:ffff98fd6e240000(0000) knlGS:0000000000000000 [ 101.525339] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.525341] CR2: 00007f34135a3a70 CR3: 0000000150210003 CR4: 00000000001706e0 [ 101.525343] Call Trace: [ 101.525346] sock_wfree+0x9c/0xa0 [ 101.525353] unix_destruct_scm+0x7b/0xa0 [ 101.525358] skb_release_head_state+0x40/0x90 [ 101.525362] skb_release_all+0xe/0x30 [ 101.525364] napi_consume_skb+0x57/0x160 [ 101.525367] igc_poll+0xb7/0xc80 [igc] [ 101.525376] ? sched_clock+0x5/0x10 [ 101.525381] ? sched_clock_cpu+0xe/0x100 [ 101.525385] net_rx_action+0x14c/0x410 [ 101.525388] __do_softirq+0xe9/0x2f4 [ 101.525391] __local_bh_enable_ip+0xe3/0x110 [ 101.525395] ? irq_finalize_oneshot.part.47+0xe0/0xe0 [ 101.525398] irq_forced_thread_fn+0x6a/0x80 [ 101.525401] irq_thread+0xe8/0x180 [ 101.525403] ? wake_threads_waitq+0x30/0x30 [ 101.525406] ? irq_thread_check_affinity+0xd0/0xd0 [ 101.525408] kthread+0x183/0x1a0 [ 101.525412] ? kthread_park+0x80/0x80 [ 101.525415] ret_from_fork+0x22/0x30 Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Reported-by: Erez Geva Signed-off-by: Vinicius Costa Gomes Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 95323095094d..1d00a63eb935 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -232,6 +232,8 @@ static void igc_clean_tx_ring(struct igc_ring *tx_ring) igc_unmap_tx_buffer(tx_ring->dev, tx_buffer); } + tx_buffer->next_to_watch = NULL; + /* move us one more past the eop_desc for start of next pkt */ tx_buffer++; i++; -- cgit v1.2.3-58-ga151 From 7b292608db23ccbbfbfa50cdb155d01725d7a52e Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Thu, 13 May 2021 17:31:04 -0700 Subject: igb: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igb_poll() runs while the controller is reset this can lead to the driver try to free a skb that was already freed. (The crash is harder to reproduce with the igb driver, but the same potential problem exists as the code is identical to igc) Fixes: 7cc6fd4c60f2 ("igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring") Signed-off-by: Vinicius Costa Gomes Reported-by: Erez Geva Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igb/igb_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 7e6435dc7e80..a61e2e5e95c0 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -4835,6 +4835,8 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring) DMA_TO_DEVICE); } + tx_buffer->next_to_watch = NULL; + /* move us one more past the eop_desc for start of next pkt */ tx_buffer++; i++; -- cgit v1.2.3-58-ga151 From 05682a0a61b6cbecd97a0f37f743b2cbfd516977 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Fri, 21 May 2021 12:50:19 -0700 Subject: igc: change default return of igc_read_phy_reg() Static analysis reports this problem igc_main.c:4944:20: warning: The left operand of '&' is a garbage value if (!(phy_data & SR_1000T_REMOTE_RX_STATUS) && ~~~~~~~~ ^ phy_data is set by the call to igc_read_phy_reg() only if there is a read_reg() op, else it is unset and a 0 is returned. Change the return to -EOPNOTSUPP. Fixes: 208983f099d9 ("igc: Add watchdog") Signed-off-by: Tom Rix Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 9e0bbb2e55e3..5901ed9fb545 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -578,7 +578,7 @@ static inline s32 igc_read_phy_reg(struct igc_hw *hw, u32 offset, u16 *data) if (hw->phy.ops.read_reg) return hw->phy.ops.read_reg(hw, offset, data); - return 0; + return -EOPNOTSUPP; } void igc_reinit_locked(struct igc_adapter *); -- cgit v1.2.3-58-ga151 From dd2aefcd5e37989ae5f90afdae44bbbf3a2990da Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 12 Jun 2021 15:46:09 +0200 Subject: ixgbe: Fix an error handling path in 'ixgbe_probe()' If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 6fabd715e6d8 ("ixgbe: Implement PCIe AER support") Signed-off-by: Christophe JAILLET Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ffff69efd78a..913253f8ecb4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -11067,6 +11067,7 @@ err_ioremap: disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state); free_netdev(netdev); err_alloc_etherdev: + pci_disable_pcie_error_reporting(pdev); pci_release_mem_regions(pdev); err_pci_reg: err_dma: -- cgit v1.2.3-58-ga151 From c6bc9e5ce5d37cb3e6b552f41b92a193db1806ab Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 12 Jun 2021 22:00:05 +0200 Subject: igc: Fix an error handling path in 'igc_probe()' If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: c9a11c23ceb6 ("igc: Add netdev") Signed-off-by: Christophe JAILLET Tested-by: Dvora Fuxbrumer Acked-by: Sasha Neftin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 1d00a63eb935..e29aadbc6744 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -6056,6 +6056,7 @@ err_sw_init: err_ioremap: free_netdev(netdev); err_alloc_etherdev: + pci_disable_pcie_error_reporting(pdev); pci_release_mem_regions(pdev); err_pci_reg: err_dma: -- cgit v1.2.3-58-ga151 From fea03b1cebd653cd095f2e9a58cfe1c85661c363 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 12 Jun 2021 22:08:33 +0200 Subject: igb: Fix an error handling path in 'igb_probe()' If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 40a914fa72ab ("igb: Add support for pci-e Advanced Error Reporting") Signed-off-by: Christophe JAILLET Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igb/igb_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index a61e2e5e95c0..abc239b736fb 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -3615,6 +3615,7 @@ err_sw_init: err_ioremap: free_netdev(netdev); err_alloc_etherdev: + pci_disable_pcie_error_reporting(pdev); pci_release_mem_regions(pdev); err_pci_reg: err_dma: -- cgit v1.2.3-58-ga151 From e85e14d68f517ef12a5fb8123fff65526b35b6cd Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 16 Jun 2021 07:00:36 +0200 Subject: fm10k: Fix an error handling path in 'fm10k_probe()' If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 19ae1b3fb99c ("fm10k: Add support for PCI power management and error handling") Signed-off-by: Christophe JAILLET Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index dbcae92bb18d..adfa2768f024 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -2227,6 +2227,7 @@ err_sw_init: err_ioremap: free_netdev(netdev); err_alloc_netdev: + pci_disable_pcie_error_reporting(pdev); pci_release_mem_regions(pdev); err_pci_reg: err_dma: -- cgit v1.2.3-58-ga151 From 4589075608420bc49fcef6e98279324bf2bb91ae Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 16 Jun 2021 07:05:53 +0200 Subject: e1000e: Fix an error handling path in 'e1000_probe()' If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 111b9dc5c981 ("e1000e: add aer support") Signed-off-by: Christophe JAILLET Acked-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000e/netdev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index d150dade06cf..757a54c39eef 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -7664,6 +7664,7 @@ err_flashmap: err_ioremap: free_netdev(netdev); err_alloc_etherdev: + pci_disable_pcie_error_reporting(pdev); pci_release_mem_regions(pdev); err_pci_reg: err_dma: -- cgit v1.2.3-58-ga151 From af30cbd2f4d6d66a9b6094e0aa32420bc8b20e08 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 16 Jun 2021 07:53:02 +0200 Subject: iavf: Fix an error handling path in 'iavf_probe()' If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Christophe JAILLET Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index e612c24fa384..44bafedd09f2 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -3798,6 +3798,7 @@ static int iavf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err_ioremap: free_netdev(netdev); err_alloc_etherdev: + pci_disable_pcie_error_reporting(pdev); pci_release_regions(pdev); err_pci_reg: err_dma: -- cgit v1.2.3-58-ga151 From 6c19d772618fea40d9681f259368f284a330fd90 Mon Sep 17 00:00:00 2001 From: Aleksandr Loktionov Date: Thu, 22 Apr 2021 10:19:23 +0000 Subject: igb: Check if num of q_vectors is smaller than max before array access Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed beyond its size. It was fixed by using a local variable num_q_vectors as a limit for loop index, and ensure that num_q_vectors is not bigger than MAX_Q_VECTORS. Fixes: 047e0030f1e6 ("igb: add new data structure for handling interrupts and NAPI") Signed-off-by: Aleksandr Loktionov Reviewed-by: Grzegorz Siwik Reviewed-by: Arkadiusz Kubalewski Reviewed-by: Slawomir Laba Reviewed-by: Sylwester Dziedziuch Reviewed-by: Mateusz Palczewski Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igb/igb_main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index abc239b736fb..9470ba891483 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -931,6 +931,7 @@ static void igb_configure_msix(struct igb_adapter *adapter) **/ static int igb_request_msix(struct igb_adapter *adapter) { + unsigned int num_q_vectors = adapter->num_q_vectors; struct net_device *netdev = adapter->netdev; int i, err = 0, vector = 0, free_vector = 0; @@ -939,7 +940,13 @@ static int igb_request_msix(struct igb_adapter *adapter) if (err) goto err_out; - for (i = 0; i < adapter->num_q_vectors; i++) { + if (num_q_vectors > MAX_Q_VECTORS) { + num_q_vectors = MAX_Q_VECTORS; + dev_warn(&adapter->pdev->dev, + "The number of queue vectors (%d) is higher than max allowed (%d)\n", + adapter->num_q_vectors, MAX_Q_VECTORS); + } + for (i = 0; i < num_q_vectors; i++) { struct igb_q_vector *q_vector = adapter->q_vector[i]; vector++; -- cgit v1.2.3-58-ga151 From 382a7c20d9253bcd5715789b8179528d0f3de72c Mon Sep 17 00:00:00 2001 From: Jedrzej Jagielski Date: Fri, 11 Jun 2021 22:42:17 +0000 Subject: igb: Fix position of assignment to *ring Assignment to *ring should be done after correctness check of the argument queue. Fixes: 91db364236c8 ("igb: Refactor igb_configure_cbs()") Signed-off-by: Jedrzej Jagielski Acked-by: Vinicius Costa Gomes Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igb/igb_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 9470ba891483..171a7a629b20 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1685,14 +1685,15 @@ static bool is_any_txtime_enabled(struct igb_adapter *adapter) **/ static void igb_config_tx_modes(struct igb_adapter *adapter, int queue) { - struct igb_ring *ring = adapter->tx_ring[queue]; struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; + struct igb_ring *ring; u32 tqavcc, tqavctrl; u16 value; WARN_ON(hw->mac.type != e1000_i210); WARN_ON(queue < 0 || queue > 1); + ring = adapter->tx_ring[queue]; /* If any of the Qav features is enabled, configure queues as SR and * with HIGH PRIO. If none is, then configure them with LOW PRIO and -- cgit v1.2.3-58-ga151 From a3609ac24c18947737f5bc1746b8735814c521d1 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 29 Jun 2021 06:43:05 +0200 Subject: net: usb: asix: ax88772: suspend PHY on driver probe After probe/bind sequence is the PHY in active state, even if interface is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale board, the ASIX PHY will be able to negotiate the link but fail to transmit the data. To handle it, suspend the PHY on probe. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Signed-off-by: Oleksij Rempel Reported-by: Marek Szyprowski Tested-by: Marek Szyprowski Signed-off-by: David S. Miller --- drivers/net/usb/asix_devices.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index aec97b021a73..2c115216420a 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -701,6 +701,7 @@ static int ax88772_init_phy(struct usbnet *dev) return ret; } + phy_suspend(priv->phydev); priv->phydev->mac_managed_pm = 1; phy_attached_info(priv->phydev); -- cgit v1.2.3-58-ga151 From 873a1e3d207ae587a7a1cc1d84545146b449ea5d Mon Sep 17 00:00:00 2001 From: Harman Kalra Date: Tue, 29 Jun 2021 22:30:04 +0530 Subject: octeontx2-af: cn10k: Setting up lmtst map table Introducing a new mailbox to support updating lmt entries and common lmt base address scheme i.e. multiple pcifuncs can share lmt region to reduce L1 cache pressure for application. Parameters passed to mailbox includes the primary pcifunc value whose lmt regions will be shared by other secondary pcifuncs. Here secondary pcifunc will be the one who is calling the mailbox. For example: By default each pcifunc has its own LMT base address: PCIFUNC1 LMT_BASE_ADDR A PCIFUNC2 LMT_BASE_ADDR B PCIFUNC3 LMT_BASE_ADDR C PCIFUNC4 LMT_BASE_ADDR D Application will choose PCIFUNC1 as base/primary pcifunc and as and when other pcifunc(secondary pcifuncs) gets probed, this mailbox will be called and LMTST table will be updated as: PCIFUNC1 LMT_BASE_ADDR A PCIFUNC2 LMT_BASE_ADDR A PCIFUNC3 LMT_BASE_ADDR A PCIFUNC4 LMT_BASE_ADDR A On FLR lmtst map table gets resetted to the default lmt base addresses for all secondary pcifuncs. Signed-off-by: Harman Kalra Signed-off-by: Geetha sowjanya Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 7 ++ drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 1 + drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 4 + .../net/ethernet/marvell/octeontx2/af/rvu_cn10k.c | 140 +++++++++++++++++++++ .../net/ethernet/marvell/octeontx2/af/rvu_reg.h | 5 + .../net/ethernet/marvell/octeontx2/af/rvu_struct.h | 3 +- 6 files changed, 159 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h index 770d86262838..638db868125a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h @@ -134,6 +134,8 @@ M(MSIX_OFFSET, 0x005, msix_offset, msg_req, msix_offset_rsp) \ M(VF_FLR, 0x006, vf_flr, msg_req, msg_rsp) \ M(PTP_OP, 0x007, ptp_op, ptp_req, ptp_rsp) \ M(GET_HW_CAP, 0x008, get_hw_cap, msg_req, get_hw_cap_rsp) \ +M(LMTST_TBL_SETUP, 0x00a, lmtst_tbl_setup, lmtst_tbl_setup_req, \ + msg_rsp) \ M(SET_VF_PERM, 0x00b, set_vf_perm, set_vf_perm, msg_rsp) \ /* CGX mbox IDs (range 0x200 - 0x3FF) */ \ M(CGX_START_RXTX, 0x200, cgx_start_rxtx, msg_req, msg_rsp) \ @@ -1278,6 +1280,11 @@ struct set_vf_perm { u64 flags; }; +struct lmtst_tbl_setup_req { + struct mbox_msghdr hdr; + u16 base_pcifunc; +}; + /* CPT mailbox error codes * Range 901 - 1000. */ diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c index 0b092949d7ac..10cddf1ac7b9 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c @@ -2333,6 +2333,7 @@ static void __rvu_flr_handler(struct rvu *rvu, u16 pcifunc) rvu_blklf_teardown(rvu, pcifunc, BLKADDR_SSOW); rvu_blklf_teardown(rvu, pcifunc, BLKADDR_SSO); rvu_blklf_teardown(rvu, pcifunc, BLKADDR_NPA); + rvu_reset_lmt_map_tbl(rvu, pcifunc); rvu_detach_rsrcs(rvu, NULL, pcifunc); mutex_unlock(&rvu->flr_lock); } diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index 9e5d9ba6f01e..3c0a7e981f72 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -243,6 +243,7 @@ struct rvu_pfvf { u8 nix_blkaddr; /* BLKADDR_NIX0/1 assigned to this PF */ u8 nix_rx_intf; /* NIX0_RX/NIX1_RX interface to NPC */ u8 nix_tx_intf; /* NIX0_TX/NIX1_TX interface to NPC */ + u64 lmt_base_addr; /* Preseving the pcifunc's lmtst base addr*/ unsigned long flags; }; @@ -754,6 +755,9 @@ int rvu_cpt_lf_teardown(struct rvu *rvu, u16 pcifunc, int lf, int slot); int rvu_set_channels_base(struct rvu *rvu); void rvu_program_channels(struct rvu *rvu); +/* CN10K RVU - LMT*/ +void rvu_reset_lmt_map_tbl(struct rvu *rvu, u16 pcifunc); + #ifdef CONFIG_DEBUG_FS void rvu_dbg_init(struct rvu *rvu); void rvu_dbg_exit(struct rvu *rvu); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c index 7d9e71c6965f..87f56e1f32e3 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c @@ -10,6 +10,146 @@ #include "cgx.h" #include "rvu_reg.h" +/* RVU LMTST */ +#define LMT_TBL_OP_READ 0 +#define LMT_TBL_OP_WRITE 1 +#define LMT_MAP_TABLE_SIZE (128 * 1024) +#define LMT_MAPTBL_ENTRY_SIZE 16 + +/* Function to perform operations (read/write) on lmtst map table */ +static int lmtst_map_table_ops(struct rvu *rvu, u32 index, u64 *val, + int lmt_tbl_op) +{ + void __iomem *lmt_map_base; + u64 tbl_base; + + tbl_base = rvu_read64(rvu, BLKADDR_APR, APR_AF_LMT_MAP_BASE); + + lmt_map_base = ioremap_wc(tbl_base, LMT_MAP_TABLE_SIZE); + if (!lmt_map_base) { + dev_err(rvu->dev, "Failed to setup lmt map table mapping!!\n"); + return -ENOMEM; + } + + if (lmt_tbl_op == LMT_TBL_OP_READ) { + *val = readq(lmt_map_base + index); + } else { + writeq((*val), (lmt_map_base + index)); + /* Flushing the AP interceptor cache to make APR_LMT_MAP_ENTRY_S + * changes effective. Write 1 for flush and read is being used as a + * barrier and sets up a data dependency. Write to 0 after a write + * to 1 to complete the flush. + */ + rvu_write64(rvu, BLKADDR_APR, APR_AF_LMT_CTL, BIT_ULL(0)); + rvu_read64(rvu, BLKADDR_APR, APR_AF_LMT_CTL); + rvu_write64(rvu, BLKADDR_APR, APR_AF_LMT_CTL, 0x00); + } + + iounmap(lmt_map_base); + return 0; +} + +static u32 rvu_get_lmtst_tbl_index(struct rvu *rvu, u16 pcifunc) +{ + return ((rvu_get_pf(pcifunc) * rvu->hw->total_vfs) + + (pcifunc & RVU_PFVF_FUNC_MASK)) * LMT_MAPTBL_ENTRY_SIZE; +} + +int rvu_mbox_handler_lmtst_tbl_setup(struct rvu *rvu, + struct lmtst_tbl_setup_req *req, + struct msg_rsp *rsp) +{ + struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, req->hdr.pcifunc); + u32 pri_tbl_idx, sec_tbl_idx; + int err = 0; + u64 val; + + /* Reconfiguring lmtst map table in lmt region shared mode i.e. make + * multiple PF_FUNCs to share an LMTLINE region, so primary/base + * pcifunc (which is passed as an argument to mailbox) is the one + * whose lmt base address will be shared among other secondary + * pcifunc (will be the one who is calling this mailbox). + */ + if (req->base_pcifunc) { + /* Calculating the LMT table index equivalent to primary + * pcifunc. + */ + pri_tbl_idx = rvu_get_lmtst_tbl_index(rvu, req->base_pcifunc); + + /* Truncating secondary pcifunc to calculate the LMT table index + * equivalent to secondary pcifunc. + */ + sec_tbl_idx = rvu_get_lmtst_tbl_index(rvu, req->hdr.pcifunc); + /* Read the base lmt addr of the secondary pcifunc */ + err = lmtst_map_table_ops(rvu, sec_tbl_idx, &val, + LMT_TBL_OP_READ); + if (err) { + dev_err(rvu->dev, + "Failed to read LMT map table: index 0x%x err %d\n", + sec_tbl_idx, err); + goto error; + } + + /* Storing the seondary's lmt base address as this needs to be + * reverted in FLR. Also making sure this default value doesn't + * get overwritten on multiple calls to this mailbox. + */ + if (!pfvf->lmt_base_addr) + pfvf->lmt_base_addr = val; + + /* Read the base lmt addr of the primary pcifunc */ + err = lmtst_map_table_ops(rvu, pri_tbl_idx, &val, + LMT_TBL_OP_READ); + if (err) { + dev_err(rvu->dev, + "Failed to read LMT map table: index 0x%x err %d\n", + pri_tbl_idx, err); + goto error; + } + + /* Update the base lmt addr of secondary with primary's base + * lmt addr. + */ + err = lmtst_map_table_ops(rvu, sec_tbl_idx, &val, + LMT_TBL_OP_WRITE); + if (err) { + dev_err(rvu->dev, + "Failed to update LMT map table: index 0x%x err %d\n", + sec_tbl_idx, err); + goto error; + } + } + +error: + return err; +} + +/* Resetting the lmtst map table to original base addresses */ +void rvu_reset_lmt_map_tbl(struct rvu *rvu, u16 pcifunc) +{ + struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, pcifunc); + u32 tbl_idx; + int err; + + if (is_rvu_otx2(rvu)) + return; + + if (pfvf->lmt_base_addr) { + /* This corresponds to lmt map table index */ + tbl_idx = rvu_get_lmtst_tbl_index(rvu, pcifunc); + /* Reverting back original lmt base addr for respective + * pcifunc. + */ + err = lmtst_map_table_ops(rvu, tbl_idx, &pfvf->lmt_base_addr, + LMT_TBL_OP_WRITE); + if (err) + dev_err(rvu->dev, + "Failed to update LMT map table: index 0x%x err %d\n", + tbl_idx, err); + pfvf->lmt_base_addr = 0; + } +} + int rvu_set_channels_base(struct rvu *rvu) { struct rvu_hwinfo *hw = rvu->hw; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h index 76837d5e19c6..61bafe956aae 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h @@ -692,4 +692,9 @@ #define LBK_LINK_CFG_ID_MASK GENMASK_ULL(11, 6) #define LBK_LINK_CFG_BASE_MASK GENMASK_ULL(5, 0) +/* APR */ +#define APR_AF_LMT_CFG (0x000ull) +#define APR_AF_LMT_MAP_BASE (0x008ull) +#define APR_AF_LMT_CTL (0x010ull) + #endif /* RVU_REG_H */ diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h index 14aa8e37ea41..5bbe6727d11d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h @@ -35,7 +35,8 @@ enum rvu_block_addr_e { BLKADDR_NDC_NPA0 = 0xeULL, BLKADDR_NDC_NIX1_RX = 0x10ULL, BLKADDR_NDC_NIX1_TX = 0x11ULL, - BLK_COUNT = 0x12ULL, + BLKADDR_APR = 0x16ULL, + BLK_COUNT = 0x17ULL, }; /* RVU Block Type Enumeration */ -- cgit v1.2.3-58-ga151 From 893ae97214c385be02f8ec097298cc48c7f0d905 Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Tue, 29 Jun 2021 22:30:05 +0530 Subject: octeontx2-af: cn10k: Support configurable LMTST regions This patch extends the lmtst_tbl_setup_req mbox to support run time LMTST configuration. RVU PF/VF and DPDK/ODP allocates a LMT region, creates a translation entry for a device via VFIO IOCTLs. This IOVA is shared with AF through above mbox. AF then uses RVU_SMMU transulation Widget and gets PA for the IOVA and updates the LMTtable entry for that device. Signed-off-by: Geetha sowjanya Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 3 + .../net/ethernet/marvell/octeontx2/af/rvu_cn10k.c | 130 +++++++++++++++------ .../net/ethernet/marvell/octeontx2/af/rvu_reg.h | 5 + 3 files changed, 103 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h index 638db868125a..9672cbf8a90a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h @@ -1283,6 +1283,9 @@ struct set_vf_perm { struct lmtst_tbl_setup_req { struct mbox_msghdr hdr; u16 base_pcifunc; + u8 use_local_lmt_region; + u64 lmt_iova; + u64 rsvd[4]; }; /* CPT mailbox error codes diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c index 87f56e1f32e3..8d48b64485c6 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c @@ -55,14 +55,101 @@ static u32 rvu_get_lmtst_tbl_index(struct rvu *rvu, u16 pcifunc) (pcifunc & RVU_PFVF_FUNC_MASK)) * LMT_MAPTBL_ENTRY_SIZE; } +static int rvu_get_lmtaddr(struct rvu *rvu, u16 pcifunc, + u64 iova, u64 *lmt_addr) +{ + u64 pa, val, pf; + int err; + + if (!iova) { + dev_err(rvu->dev, "%s Requested Null address for transulation\n", __func__); + return -EINVAL; + } + + rvu_write64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_REQ, iova); + pf = rvu_get_pf(pcifunc) & 0x1F; + val = BIT_ULL(63) | BIT_ULL(14) | BIT_ULL(13) | pf << 8 | + ((pcifunc & RVU_PFVF_FUNC_MASK) & 0xFF); + rvu_write64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_TXN_REQ, val); + + err = rvu_poll_reg(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_RSP_STS, BIT_ULL(0), false); + if (err) { + dev_err(rvu->dev, "%s LMTLINE iova transulation failed\n", __func__); + return err; + } + val = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_RSP_STS); + if (val & ~0x1ULL) { + dev_err(rvu->dev, "%s LMTLINE iova transulation failed err:%llx\n", __func__, val); + return -EIO; + } + /* PA[51:12] = RVU_AF_SMMU_TLN_FLIT1[60:21] + * PA[11:0] = IOVA[11:0] + */ + pa = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_TLN_FLIT1) >> 21; + pa &= GENMASK_ULL(39, 0); + *lmt_addr = (pa << 12) | (iova & 0xFFF); + + return 0; +} + +static int rvu_update_lmtaddr(struct rvu *rvu, u16 pcifunc, u64 lmt_addr) +{ + struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, pcifunc); + u32 tbl_idx; + int err = 0; + u64 val; + + /* Read the current lmt addr of pcifunc */ + tbl_idx = rvu_get_lmtst_tbl_index(rvu, pcifunc); + err = lmtst_map_table_ops(rvu, tbl_idx, &val, LMT_TBL_OP_READ); + if (err) { + dev_err(rvu->dev, + "Failed to read LMT map table: index 0x%x err %d\n", + tbl_idx, err); + return err; + } + + /* Storing the seondary's lmt base address as this needs to be + * reverted in FLR. Also making sure this default value doesn't + * get overwritten on multiple calls to this mailbox. + */ + if (!pfvf->lmt_base_addr) + pfvf->lmt_base_addr = val; + + /* Update the LMT table with new addr */ + err = lmtst_map_table_ops(rvu, tbl_idx, &lmt_addr, LMT_TBL_OP_WRITE); + if (err) { + dev_err(rvu->dev, + "Failed to update LMT map table: index 0x%x err %d\n", + tbl_idx, err); + return err; + } + return 0; +} + int rvu_mbox_handler_lmtst_tbl_setup(struct rvu *rvu, struct lmtst_tbl_setup_req *req, struct msg_rsp *rsp) { - struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, req->hdr.pcifunc); - u32 pri_tbl_idx, sec_tbl_idx; + u64 lmt_addr, val; + u32 pri_tbl_idx; int err = 0; - u64 val; + + /* Check if PF_FUNC wants to use it's own local memory as LMTLINE + * region, if so, convert that IOVA to physical address and + * populate LMT table with that address + */ + if (req->use_local_lmt_region) { + err = rvu_get_lmtaddr(rvu, req->hdr.pcifunc, + req->lmt_iova, &lmt_addr); + if (err < 0) + return err; + + /* Update the lmt addr for this PFFUNC in the LMT table */ + err = rvu_update_lmtaddr(rvu, req->hdr.pcifunc, lmt_addr); + if (err) + return err; + } /* Reconfiguring lmtst map table in lmt region shared mode i.e. make * multiple PF_FUNCs to share an LMTLINE region, so primary/base @@ -76,27 +163,6 @@ int rvu_mbox_handler_lmtst_tbl_setup(struct rvu *rvu, */ pri_tbl_idx = rvu_get_lmtst_tbl_index(rvu, req->base_pcifunc); - /* Truncating secondary pcifunc to calculate the LMT table index - * equivalent to secondary pcifunc. - */ - sec_tbl_idx = rvu_get_lmtst_tbl_index(rvu, req->hdr.pcifunc); - /* Read the base lmt addr of the secondary pcifunc */ - err = lmtst_map_table_ops(rvu, sec_tbl_idx, &val, - LMT_TBL_OP_READ); - if (err) { - dev_err(rvu->dev, - "Failed to read LMT map table: index 0x%x err %d\n", - sec_tbl_idx, err); - goto error; - } - - /* Storing the seondary's lmt base address as this needs to be - * reverted in FLR. Also making sure this default value doesn't - * get overwritten on multiple calls to this mailbox. - */ - if (!pfvf->lmt_base_addr) - pfvf->lmt_base_addr = val; - /* Read the base lmt addr of the primary pcifunc */ err = lmtst_map_table_ops(rvu, pri_tbl_idx, &val, LMT_TBL_OP_READ); @@ -104,24 +170,18 @@ int rvu_mbox_handler_lmtst_tbl_setup(struct rvu *rvu, dev_err(rvu->dev, "Failed to read LMT map table: index 0x%x err %d\n", pri_tbl_idx, err); - goto error; + return err; } /* Update the base lmt addr of secondary with primary's base * lmt addr. */ - err = lmtst_map_table_ops(rvu, sec_tbl_idx, &val, - LMT_TBL_OP_WRITE); - if (err) { - dev_err(rvu->dev, - "Failed to update LMT map table: index 0x%x err %d\n", - sec_tbl_idx, err); - goto error; - } + err = rvu_update_lmtaddr(rvu, req->hdr.pcifunc, val); + if (err) + return err; } -error: - return err; + return 0; } /* Resetting the lmtst map table to original base addresses */ diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h index 61bafe956aae..8b01ef6e2c99 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h @@ -49,6 +49,11 @@ #define RVU_AF_PFX_VF_BAR4_ADDR (0x5400 | (a) << 4) #define RVU_AF_PFX_VF_BAR4_CFG (0x5600 | (a) << 4) #define RVU_AF_PFX_LMTLINE_ADDR (0x5800 | (a) << 4) +#define RVU_AF_SMMU_ADDR_REQ (0x6000) +#define RVU_AF_SMMU_TXN_REQ (0x6008) +#define RVU_AF_SMMU_ADDR_RSP_STS (0x6010) +#define RVU_AF_SMMU_ADDR_TLN (0x6018) +#define RVU_AF_SMMU_TLN_FLIT1 (0x6030) /* Admin function's privileged PF/VF registers */ #define RVU_PRIV_CONST (0x8000000) -- cgit v1.2.3-58-ga151 From 5c0512072f6517326d9fba083c4467f173ddd984 Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Tue, 29 Jun 2021 22:30:06 +0530 Subject: octeontx2-pf: cn10k: Use runtime allocated LMTLINE region The current driver uses static LMTST region allocated by firmware. This memory gets populated as PF/VF BAR2. RVU PF/VF driver ioremap the memory as device memory for NIX/NPA operation. Since the memory is mapped as device memory we see performance degration. To address this issue this patch implements runtime memory allocation. RVU PF/VF allocates memory during device probe and share the base address with RVU AF. RVU AF then configure the LMT MAP table accordingly. Signed-off-by: Geetha sowjanya Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c | 87 +++++++++------------- drivers/net/ethernet/marvell/octeontx2/nic/cn10k.h | 3 +- .../ethernet/marvell/octeontx2/nic/otx2_common.h | 7 +- .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 17 ++--- .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.h | 1 + .../net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 12 ++- 6 files changed, 54 insertions(+), 73 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c index 1b08896b46d2..184de9466286 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c @@ -22,69 +22,52 @@ static struct dev_hw_ops cn10k_hw_ops = { .refill_pool_ptrs = cn10k_refill_pool_ptrs, }; -int cn10k_pf_lmtst_init(struct otx2_nic *pf) +int cn10k_lmtst_init(struct otx2_nic *pfvf) { - int size, num_lines; - u64 base; - if (!test_bit(CN10K_LMTST, &pf->hw.cap_flag)) { - pf->hw_ops = &otx2_hw_ops; + struct lmtst_tbl_setup_req *req; + int qcount, err; + + if (!test_bit(CN10K_LMTST, &pfvf->hw.cap_flag)) { + pfvf->hw_ops = &otx2_hw_ops; return 0; } - pf->hw_ops = &cn10k_hw_ops; - base = pci_resource_start(pf->pdev, PCI_MBOX_BAR_NUM) + - (MBOX_SIZE * (pf->total_vfs + 1)); - - size = pci_resource_len(pf->pdev, PCI_MBOX_BAR_NUM) - - (MBOX_SIZE * (pf->total_vfs + 1)); - - pf->hw.lmt_base = ioremap(base, size); + pfvf->hw_ops = &cn10k_hw_ops; + qcount = pfvf->hw.max_queues; + /* LMTST lines allocation + * qcount = num_online_cpus(); + * NPA = TX + RX + XDP. + * NIX = TX * 32 (For Burst SQE flush). + */ + pfvf->tot_lmt_lines = (qcount * 3) + (qcount * 32); + pfvf->npa_lmt_lines = qcount * 3; + pfvf->nix_lmt_size = LMT_BURST_SIZE * LMT_LINE_SIZE; - if (!pf->hw.lmt_base) { - dev_err(pf->dev, "Unable to map PF LMTST region\n"); + mutex_lock(&pfvf->mbox.lock); + req = otx2_mbox_alloc_msg_lmtst_tbl_setup(&pfvf->mbox); + if (!req) { + mutex_unlock(&pfvf->mbox.lock); return -ENOMEM; } - /* FIXME: Get the num of LMTST lines from LMT table */ - pf->tot_lmt_lines = size / LMT_LINE_SIZE; - num_lines = (pf->tot_lmt_lines - NIX_LMTID_BASE) / - pf->hw.tx_queues; - /* Number of LMT lines per SQ queues */ - pf->nix_lmt_lines = num_lines > 32 ? 32 : num_lines; - - pf->nix_lmt_size = pf->nix_lmt_lines * LMT_LINE_SIZE; - return 0; -} + req->use_local_lmt_region = true; -int cn10k_vf_lmtst_init(struct otx2_nic *vf) -{ - int size, num_lines; - - if (!test_bit(CN10K_LMTST, &vf->hw.cap_flag)) { - vf->hw_ops = &otx2_hw_ops; - return 0; + err = qmem_alloc(pfvf->dev, &pfvf->dync_lmt, pfvf->tot_lmt_lines, + LMT_LINE_SIZE); + if (err) { + mutex_unlock(&pfvf->mbox.lock); + return err; } + pfvf->hw.lmt_base = (u64 *)pfvf->dync_lmt->base; + req->lmt_iova = (u64)pfvf->dync_lmt->iova; - vf->hw_ops = &cn10k_hw_ops; - size = pci_resource_len(vf->pdev, PCI_MBOX_BAR_NUM); - vf->hw.lmt_base = ioremap_wc(pci_resource_start(vf->pdev, - PCI_MBOX_BAR_NUM), - size); - if (!vf->hw.lmt_base) { - dev_err(vf->dev, "Unable to map VF LMTST region\n"); - return -ENOMEM; - } + err = otx2_sync_mbox_msg(&pfvf->mbox); + mutex_unlock(&pfvf->mbox.lock); - vf->tot_lmt_lines = size / LMT_LINE_SIZE; - /* LMTST lines per SQ */ - num_lines = (vf->tot_lmt_lines - NIX_LMTID_BASE) / - vf->hw.tx_queues; - vf->nix_lmt_lines = num_lines > 32 ? 32 : num_lines; - vf->nix_lmt_size = vf->nix_lmt_lines * LMT_LINE_SIZE; return 0; } -EXPORT_SYMBOL(cn10k_vf_lmtst_init); +EXPORT_SYMBOL(cn10k_lmtst_init); int cn10k_sq_aq_init(void *dev, u16 qidx, u16 sqb_aura) { @@ -93,9 +76,11 @@ int cn10k_sq_aq_init(void *dev, u16 qidx, u16 sqb_aura) struct otx2_snd_queue *sq; sq = &pfvf->qset.sq[qidx]; - sq->lmt_addr = (__force u64 *)((u64)pfvf->hw.nix_lmt_base + + sq->lmt_addr = (u64 *)((u64)pfvf->hw.nix_lmt_base + (qidx * pfvf->nix_lmt_size)); + sq->lmt_id = pfvf->npa_lmt_lines + (qidx * LMT_BURST_SIZE); + /* Get memory to put this msg */ aq = otx2_mbox_alloc_msg_nix_cn10k_aq_enq(&pfvf->mbox); if (!aq) @@ -158,15 +143,13 @@ void cn10k_refill_pool_ptrs(void *dev, struct otx2_cq_queue *cq) void cn10k_sqe_flush(void *dev, struct otx2_snd_queue *sq, int size, int qidx) { - struct otx2_nic *pfvf = dev; - int lmt_id = NIX_LMTID_BASE + (qidx * pfvf->nix_lmt_lines); u64 val = 0, tar_addr = 0; /* FIXME: val[0:10] LMT_ID. * [12:15] no of LMTST - 1 in the burst. * [19:63] data size of each LMTST in the burst except first. */ - val = (lmt_id & 0x7FF); + val = (sq->lmt_id & 0x7FF); /* Target address for LMTST flush tells HW how many 128bit * words are present. * tar_addr[6:4] size of first LMTST - 1 in units of 128b. diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.h b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.h index 71292a4cf1f3..1a1ae334477d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.h @@ -12,8 +12,7 @@ void cn10k_refill_pool_ptrs(void *dev, struct otx2_cq_queue *cq); void cn10k_sqe_flush(void *dev, struct otx2_snd_queue *sq, int size, int qidx); int cn10k_sq_aq_init(void *dev, u16 qidx, u16 sqb_aura); -int cn10k_pf_lmtst_init(struct otx2_nic *pf); -int cn10k_vf_lmtst_init(struct otx2_nic *vf); +int cn10k_lmtst_init(struct otx2_nic *pfvf); int cn10k_free_all_ipolicers(struct otx2_nic *pfvf); int cn10k_alloc_matchall_ipolicer(struct otx2_nic *pfvf); int cn10k_free_matchall_ipolicer(struct otx2_nic *pfvf); diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h index 234b330f3183..20a9c69f020f 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h @@ -218,8 +218,8 @@ struct otx2_hw { unsigned long cap_flag; #define LMT_LINE_SIZE 128 -#define NIX_LMTID_BASE 72 /* RX + TX + XDP */ - void __iomem *lmt_base; +#define LMT_BURST_SIZE 32 /* 32 LMTST lines for burst SQE flush */ + u64 *lmt_base; u64 *npa_lmt_base; u64 *nix_lmt_base; }; @@ -363,8 +363,9 @@ struct otx2_nic { /* Block address of NIX either BLKADDR_NIX0 or BLKADDR_NIX1 */ int nix_blkaddr; /* LMTST Lines info */ + struct qmem *dync_lmt; u16 tot_lmt_lines; - u16 nix_lmt_lines; + u16 npa_lmt_lines; u32 nix_lmt_size; struct otx2_ptp *ptp; diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 59912f73417b..088c28df849d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1533,10 +1533,10 @@ int otx2_open(struct net_device *netdev) if (test_bit(CN10K_LMTST, &pf->hw.cap_flag)) { /* Reserve LMT lines for NPA AURA batch free */ - pf->hw.npa_lmt_base = (__force u64 *)pf->hw.lmt_base; + pf->hw.npa_lmt_base = pf->hw.lmt_base; /* Reserve LMT lines for NIX TX */ - pf->hw.nix_lmt_base = (__force u64 *)((u64)pf->hw.npa_lmt_base + - (NIX_LMTID_BASE * LMT_LINE_SIZE)); + pf->hw.nix_lmt_base = (u64 *)((u64)pf->hw.npa_lmt_base + + (pf->npa_lmt_lines * LMT_LINE_SIZE)); } err = otx2_init_hw_resources(pf); @@ -2526,7 +2526,7 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (err) goto err_detach_rsrc; - err = cn10k_pf_lmtst_init(pf); + err = cn10k_lmtst_init(pf); if (err) goto err_detach_rsrc; @@ -2630,8 +2630,8 @@ err_del_mcam_entries: err_ptp_destroy: otx2_ptp_destroy(pf); err_detach_rsrc: - if (hw->lmt_base) - iounmap(hw->lmt_base); + if (test_bit(CN10K_LMTST, &pf->hw.cap_flag)) + qmem_free(pf->dev, pf->dync_lmt); otx2_detach_resources(&pf->mbox); err_disable_mbox_intr: otx2_disable_mbox_intr(pf); @@ -2772,9 +2772,8 @@ static void otx2_remove(struct pci_dev *pdev) otx2_mcam_flow_del(pf); otx2_shutdown_tc(pf); otx2_detach_resources(&pf->mbox); - if (pf->hw.lmt_base) - iounmap(pf->hw.lmt_base); - + if (test_bit(CN10K_LMTST, &pf->hw.cap_flag)) + qmem_free(pf->dev, pf->dync_lmt); otx2_disable_mbox_intr(pf); otx2_pfaf_mbox_destroy(pf); pci_free_irq_vectors(pf->pdev); diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h index 52486c1f0973..2f144e2cf436 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h @@ -83,6 +83,7 @@ struct otx2_snd_queue { u16 num_sqbs; u16 sqe_thresh; u8 sqe_per_sqb; + u32 lmt_id; u64 io_addr; u64 *aura_fc_addr; u64 *lmt_addr; diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c index 13a908f75ba0..a8bee5aefec1 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c @@ -609,7 +609,7 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (err) goto err_detach_rsrc; - err = cn10k_vf_lmtst_init(vf); + err = cn10k_lmtst_init(vf); if (err) goto err_detach_rsrc; @@ -667,8 +667,8 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id) err_unreg_netdev: unregister_netdev(netdev); err_detach_rsrc: - if (hw->lmt_base) - iounmap(hw->lmt_base); + if (test_bit(CN10K_LMTST, &vf->hw.cap_flag)) + qmem_free(vf->dev, vf->dync_lmt); otx2_detach_resources(&vf->mbox); err_disable_mbox_intr: otx2vf_disable_mbox_intr(vf); @@ -700,10 +700,8 @@ static void otx2vf_remove(struct pci_dev *pdev) destroy_workqueue(vf->otx2_wq); otx2vf_disable_mbox_intr(vf); otx2_detach_resources(&vf->mbox); - - if (vf->hw.lmt_base) - iounmap(vf->hw.lmt_base); - + if (test_bit(CN10K_LMTST, &vf->hw.cap_flag)) + qmem_free(vf->dev, vf->dync_lmt); otx2vf_vfaf_mbox_destroy(vf); pci_free_irq_vectors(vf->pdev); pci_set_drvdata(pdev, NULL); -- cgit v1.2.3-58-ga151 From 5a3c680aa2c12c90c44af383fe6882a39875ab81 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Tue, 29 Jun 2021 17:14:19 -0700 Subject: net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 17 ++--------------- drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 6 ------ 2 files changed, 2 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 41f7f078cd27..35e9956e930c 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1640,7 +1640,8 @@ static void bcmgenet_power_up(struct bcmgenet_priv *priv, switch (mode) { case GENET_POWER_PASSIVE: - reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS); + reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS | + EXT_ENERGY_DET_MASK); if (GENET_IS_V5(priv)) { reg &= ~(EXT_PWR_DOWN_PHY_EN | EXT_PWR_DOWN_PHY_RD | @@ -3292,7 +3293,6 @@ static int bcmgenet_open(struct net_device *dev) { struct bcmgenet_priv *priv = netdev_priv(dev); unsigned long dma_ctrl; - u32 reg; int ret; netif_dbg(priv, ifup, dev, "bcmgenet_open\n"); @@ -3318,12 +3318,6 @@ static int bcmgenet_open(struct net_device *dev) bcmgenet_set_hw_addr(priv, dev->dev_addr); - if (priv->internal_phy) { - reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); - reg |= EXT_ENERGY_DET_MASK; - bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); - } - /* Disable RX/TX DMA and flush TX queues */ dma_ctrl = bcmgenet_dma_disable(priv); @@ -4139,7 +4133,6 @@ static int bcmgenet_resume(struct device *d) struct bcmgenet_priv *priv = netdev_priv(dev); struct bcmgenet_rxnfc_rule *rule; unsigned long dma_ctrl; - u32 reg; int ret; if (!netif_running(dev)) @@ -4176,12 +4169,6 @@ static int bcmgenet_resume(struct device *d) if (rule->state != BCMGENET_RXNFC_STATE_UNUSED) bcmgenet_hfb_create_rxnfc_filter(priv, rule); - if (priv->internal_phy) { - reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); - reg |= EXT_ENERGY_DET_MASK; - bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); - } - /* Disable RX/TX DMA and flush TX queues */ dma_ctrl = bcmgenet_dma_disable(priv); diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c index facde824bcaa..e31a5a397f11 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c @@ -186,12 +186,6 @@ int bcmgenet_wol_power_down_cfg(struct bcmgenet_priv *priv, reg |= CMD_RX_EN; bcmgenet_umac_writel(priv, reg, UMAC_CMD); - if (priv->hw_params->flags & GENET_HAS_EXT) { - reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); - reg &= ~EXT_ENERGY_DET_MASK; - bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); - } - reg = UMAC_IRQ_MPD_R; if (hfb_enable) reg |= UMAC_IRQ_HFB_SM | UMAC_IRQ_HFB_MM; -- cgit v1.2.3-58-ga151 From 7da467d82d1ed4fb317aff836f99709169e73f10 Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Thu, 1 Jul 2021 00:22:26 +0200 Subject: net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy") introduced .port_set_policy() method with implementation for several models, but forgot to add Topaz, which can use the 6352 implementation. Use the 6352 implementation of .port_set_policy() on Topaz. Signed-off-by: Marek Behún Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 961fa6b75cad..6bcee3e012d4 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3583,6 +3583,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .port_set_speed_duplex = mv88e6341_port_set_speed_duplex, .port_max_speed_mode = mv88e6341_port_max_speed_mode, .port_tag_remap = mv88e6095_port_tag_remap, + .port_set_policy = mv88e6352_port_set_policy, .port_set_frame_mode = mv88e6351_port_set_frame_mode, .port_set_ucast_flood = mv88e6352_port_set_ucast_flood, .port_set_mcast_flood = mv88e6352_port_set_mcast_flood, @@ -4383,6 +4384,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .port_set_speed_duplex = mv88e6341_port_set_speed_duplex, .port_max_speed_mode = mv88e6341_port_max_speed_mode, .port_tag_remap = mv88e6095_port_tag_remap, + .port_set_policy = mv88e6352_port_set_policy, .port_set_frame_mode = mv88e6351_port_set_frame_mode, .port_set_ucast_flood = mv88e6352_port_set_ucast_flood, .port_set_mcast_flood = mv88e6352_port_set_mcast_flood, -- cgit v1.2.3-58-ga151 From 11527f3c4725640e6c40a2b7654e303f45e82a6c Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Thu, 1 Jul 2021 00:22:27 +0200 Subject: net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") introduced wrong .stats_set_histogram() method for Topaz family. The Peridot method should be used instead. Signed-off-by: Marek Behún Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 6bcee3e012d4..b125d3227dbd 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3597,7 +3597,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .port_set_cmode = mv88e6341_port_set_cmode, .port_setup_message_port = mv88e6xxx_setup_message_port, .stats_snapshot = mv88e6390_g1_stats_snapshot, - .stats_set_histogram = mv88e6095_g1_stats_set_histogram, + .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, .stats_get_stats = mv88e6390_stats_get_stats, @@ -4398,7 +4398,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .port_set_cmode = mv88e6341_port_set_cmode, .port_setup_message_port = mv88e6xxx_setup_message_port, .stats_snapshot = mv88e6390_g1_stats_snapshot, - .stats_set_histogram = mv88e6095_g1_stats_set_histogram, + .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, .stats_get_stats = mv88e6390_stats_get_stats, -- cgit v1.2.3-58-ga151 From 3709488790022c85720f991bff50d48ed5a36e6a Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Thu, 1 Jul 2021 00:22:28 +0200 Subject: net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op") introduced .rmu_disable() method with implementation for several models, but forgot to add Topaz, which can use the Peridot implementation. Use the Peridot implementation of .rmu_disable() on Topaz. Signed-off-by: Marek Behún Fixes: 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index b125d3227dbd..d4b05c10e5f2 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3607,6 +3607,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, .reset = mv88e6352_g1_reset, + .rmu_disable = mv88e6390_g1_rmu_disable, .vtu_getnext = mv88e6352_g1_vtu_getnext, .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .serdes_power = mv88e6390_serdes_power, @@ -4408,6 +4409,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, .reset = mv88e6352_g1_reset, + .rmu_disable = mv88e6390_g1_rmu_disable, .vtu_getnext = mv88e6352_g1_vtu_getnext, .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .serdes_power = mv88e6390_serdes_power, -- cgit v1.2.3-58-ga151 From c07fff3492acae41cedbabea395b644dd5872b8c Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Thu, 1 Jul 2021 00:22:29 +0200 Subject: net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 23e8b470c7788 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.") introduced ATU hash algorithm access via devlink, but did not enable it for Topaz. Enable this feature also for Topaz. Signed-off-by: Marek Behún Fixes: 23e8b470c7788 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index d4b05c10e5f2..354ff0b84b7f 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3608,6 +3608,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .pot_clear = mv88e6xxx_g2_pot_clear, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, + .atu_get_hash = mv88e6165_g1_atu_get_hash, + .atu_set_hash = mv88e6165_g1_atu_set_hash, .vtu_getnext = mv88e6352_g1_vtu_getnext, .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .serdes_power = mv88e6390_serdes_power, @@ -4410,6 +4412,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .pot_clear = mv88e6xxx_g2_pot_clear, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, + .atu_get_hash = mv88e6165_g1_atu_get_hash, + .atu_set_hash = mv88e6165_g1_atu_set_hash, .vtu_getnext = mv88e6352_g1_vtu_getnext, .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .serdes_power = mv88e6390_serdes_power, -- cgit v1.2.3-58-ga151 From a03b98d68367b18e5db6d6850e2cc18754fba94a Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Thu, 1 Jul 2021 00:22:30 +0200 Subject: net: dsa: mv88e6xxx: enable SerDes RX stats for Topaz MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 0df952873636a ("mv88e6xxx: Add serdes Rx statistics") added support for RX statistics on SerDes ports for Peridot. This same implementation is also valid for Topaz, but was not enabled at the time. We need to use the generic .serdes_get_lane() method instead of the Peridot specific one in the stats methods so that on Topaz the proper one is used. Signed-off-by: Marek Behún Fixes: 0df952873636a ("mv88e6xxx: Add serdes Rx statistics") Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 6 ++++++ drivers/net/dsa/mv88e6xxx/serdes.c | 6 +++--- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 354ff0b84b7f..1e95a0facbd4 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3623,6 +3623,9 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .serdes_irq_enable = mv88e6390_serdes_irq_enable, .serdes_irq_status = mv88e6390_serdes_irq_status, .gpio_ops = &mv88e6352_gpio_ops, + .serdes_get_sset_count = mv88e6390_serdes_get_sset_count, + .serdes_get_strings = mv88e6390_serdes_get_strings, + .serdes_get_stats = mv88e6390_serdes_get_stats, .phylink_validate = mv88e6341_phylink_validate, }; @@ -4429,6 +4432,9 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6390_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, + .serdes_get_sset_count = mv88e6390_serdes_get_sset_count, + .serdes_get_strings = mv88e6390_serdes_get_strings, + .serdes_get_stats = mv88e6390_serdes_get_stats, .phylink_validate = mv88e6341_phylink_validate, }; diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c index e4fbef81bc52..b1d46dd8eaab 100644 --- a/drivers/net/dsa/mv88e6xxx/serdes.c +++ b/drivers/net/dsa/mv88e6xxx/serdes.c @@ -722,7 +722,7 @@ static struct mv88e6390_serdes_hw_stat mv88e6390_serdes_hw_stats[] = { int mv88e6390_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port) { - if (mv88e6390_serdes_get_lane(chip, port) < 0) + if (mv88e6xxx_serdes_get_lane(chip, port) < 0) return 0; return ARRAY_SIZE(mv88e6390_serdes_hw_stats); @@ -734,7 +734,7 @@ int mv88e6390_serdes_get_strings(struct mv88e6xxx_chip *chip, struct mv88e6390_serdes_hw_stat *stat; int i; - if (mv88e6390_serdes_get_lane(chip, port) < 0) + if (mv88e6xxx_serdes_get_lane(chip, port) < 0) return 0; for (i = 0; i < ARRAY_SIZE(mv88e6390_serdes_hw_stats); i++) { @@ -770,7 +770,7 @@ int mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, int lane; int i; - lane = mv88e6390_serdes_get_lane(chip, port); + lane = mv88e6xxx_serdes_get_lane(chip, port); if (lane < 0) return 0; -- cgit v1.2.3-58-ga151 From 953b0dcbe2e3f7bee98cc3bca2ec82c8298e9c16 Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Thu, 1 Jul 2021 00:22:31 +0200 Subject: net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit bf3504cea7d7e ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d") added support for dumping SerDes PCS registers via ethtool -d for Peridot. The same implementation is also valid for Topaz, but was not enabled at the time. Signed-off-by: Marek Behún Fixes: bf3504cea7d7e ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 1e95a0facbd4..beb41572d04e 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3626,6 +3626,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .serdes_get_sset_count = mv88e6390_serdes_get_sset_count, .serdes_get_strings = mv88e6390_serdes_get_strings, .serdes_get_stats = mv88e6390_serdes_get_stats, + .serdes_get_regs_len = mv88e6390_serdes_get_regs_len, + .serdes_get_regs = mv88e6390_serdes_get_regs, .phylink_validate = mv88e6341_phylink_validate, }; @@ -4435,6 +4437,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .serdes_get_sset_count = mv88e6390_serdes_get_sset_count, .serdes_get_strings = mv88e6390_serdes_get_strings, .serdes_get_stats = mv88e6390_serdes_get_stats, + .serdes_get_regs_len = mv88e6390_serdes_get_regs_len, + .serdes_get_regs = mv88e6390_serdes_get_regs, .phylink_validate = mv88e6341_phylink_validate, }; -- cgit v1.2.3-58-ga151 From 6f14078e3ee59ccc5806f7bff0f25f94a6d3ff80 Mon Sep 17 00:00:00 2001 From: Sunil Kumar Kori Date: Wed, 30 Jun 2021 15:40:57 +0530 Subject: octeontx2-af: DMAC filter support in MAC block MAC block supports 32 dmac filters which are logically divided among all attached LMACS. For example MAC block0 having one LMAC then maximum supported filters are 32 where as MAC block1 having 4 enabled LMACS them maximum supported filteres are 8 for each LMAC. This patch adds mbox handlers to add/delete/update mac entry in DMAC filter table. Signed-off-by: Sunil Kumar Kori Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 264 +++++++++++++++++++-- drivers/net/ethernet/marvell/octeontx2/af/cgx.h | 7 + .../ethernet/marvell/octeontx2/af/lmac_common.h | 12 +- drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 48 +++- drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 2 + .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 109 +++++++++ .../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 3 + 7 files changed, 425 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c index fac6474ad694..bc413f96b430 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c @@ -86,6 +86,22 @@ bool is_lmac_valid(struct cgx *cgx, int lmac_id) return test_bit(lmac_id, &cgx->lmac_bmap); } +/* Helper function to get sequential index + * given the enabled LMAC of a CGX + */ +static int get_sequence_id_of_lmac(struct cgx *cgx, int lmac_id) +{ + int tmp, id = 0; + + for_each_set_bit(tmp, &cgx->lmac_bmap, MAX_LMAC_PER_CGX) { + if (tmp == lmac_id) + break; + id++; + } + + return id; +} + struct mac_ops *get_mac_ops(void *cgxd) { if (!cgxd) @@ -211,37 +227,229 @@ static u64 mac2u64 (u8 *mac_addr) return mac; } +static void cfg2mac(u64 cfg, u8 *mac_addr) +{ + int i, index = 0; + + for (i = ETH_ALEN - 1; i >= 0; i--, index++) + mac_addr[i] = (cfg >> (8 * index)) & 0xFF; +} + int cgx_lmac_addr_set(u8 cgx_id, u8 lmac_id, u8 *mac_addr) { struct cgx *cgx_dev = cgx_get_pdata(cgx_id); + struct lmac *lmac = lmac_pdata(lmac_id, cgx_dev); struct mac_ops *mac_ops; + int index, id; u64 cfg; + /* access mac_ops to know csr_offset */ mac_ops = cgx_dev->mac_ops; + /* copy 6bytes from macaddr */ /* memcpy(&cfg, mac_addr, 6); */ cfg = mac2u64 (mac_addr); - cgx_write(cgx_dev, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (lmac_id * 0x8)), + id = get_sequence_id_of_lmac(cgx_dev, lmac_id); + + index = id * lmac->mac_to_index_bmap.max; + + cgx_write(cgx_dev, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (index * 0x8)), cfg | CGX_DMAC_CAM_ADDR_ENABLE | ((u64)lmac_id << 49)); cfg = cgx_read(cgx_dev, lmac_id, CGXX_CMRX_RX_DMAC_CTL0); - cfg |= CGX_DMAC_CTL0_CAM_ENABLE; + cfg |= (CGX_DMAC_CTL0_CAM_ENABLE | CGX_DMAC_BCAST_MODE | + CGX_DMAC_MCAST_MODE); + cgx_write(cgx_dev, lmac_id, CGXX_CMRX_RX_DMAC_CTL0, cfg); + + return 0; +} + +int cgx_lmac_addr_add(u8 cgx_id, u8 lmac_id, u8 *mac_addr) +{ + struct cgx *cgx_dev = cgx_get_pdata(cgx_id); + struct lmac *lmac = lmac_pdata(lmac_id, cgx_dev); + struct mac_ops *mac_ops; + int index, idx; + u64 cfg = 0; + int id; + + if (!lmac) + return -ENODEV; + + mac_ops = cgx_dev->mac_ops; + /* Get available index where entry is to be installed */ + idx = rvu_alloc_rsrc(&lmac->mac_to_index_bmap); + if (idx < 0) + return idx; + + id = get_sequence_id_of_lmac(cgx_dev, lmac_id); + + index = id * lmac->mac_to_index_bmap.max + idx; + + cfg = mac2u64 (mac_addr); + cfg |= CGX_DMAC_CAM_ADDR_ENABLE; + cfg |= ((u64)lmac_id << 49); + cgx_write(cgx_dev, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (index * 0x8)), cfg); + + cfg = cgx_read(cgx_dev, lmac_id, CGXX_CMRX_RX_DMAC_CTL0); + cfg |= (CGX_DMAC_BCAST_MODE | CGX_DMAC_CAM_ACCEPT); + + if (is_multicast_ether_addr(mac_addr)) { + cfg &= ~GENMASK_ULL(2, 1); + cfg |= CGX_DMAC_MCAST_MODE_CAM; + lmac->mcast_filters_count++; + } else if (!lmac->mcast_filters_count) { + cfg |= CGX_DMAC_MCAST_MODE; + } + + cgx_write(cgx_dev, lmac_id, CGXX_CMRX_RX_DMAC_CTL0, cfg); + + return idx; +} + +int cgx_lmac_addr_reset(u8 cgx_id, u8 lmac_id) +{ + struct cgx *cgx_dev = cgx_get_pdata(cgx_id); + struct lmac *lmac = lmac_pdata(lmac_id, cgx_dev); + struct mac_ops *mac_ops; + u8 index = 0, id; + u64 cfg; + + if (!lmac) + return -ENODEV; + + mac_ops = cgx_dev->mac_ops; + /* Restore index 0 to its default init value as done during + * cgx_lmac_init + */ + set_bit(0, lmac->mac_to_index_bmap.bmap); + + id = get_sequence_id_of_lmac(cgx_dev, lmac_id); + + index = id * lmac->mac_to_index_bmap.max + index; + cgx_write(cgx_dev, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (index * 0x8)), 0); + + /* Reset CGXX_CMRX_RX_DMAC_CTL0 register to default state */ + cfg = cgx_read(cgx_dev, lmac_id, CGXX_CMRX_RX_DMAC_CTL0); + cfg &= ~CGX_DMAC_CAM_ACCEPT; + cfg |= (CGX_DMAC_BCAST_MODE | CGX_DMAC_MCAST_MODE); cgx_write(cgx_dev, lmac_id, CGXX_CMRX_RX_DMAC_CTL0, cfg); return 0; } +/* Allows caller to change macaddress associated with index + * in dmac filter table including index 0 reserved for + * interface mac address + */ +int cgx_lmac_addr_update(u8 cgx_id, u8 lmac_id, u8 *mac_addr, u8 index) +{ + struct cgx *cgx_dev = cgx_get_pdata(cgx_id); + struct mac_ops *mac_ops; + struct lmac *lmac; + u64 cfg; + int id; + + lmac = lmac_pdata(lmac_id, cgx_dev); + if (!lmac) + return -ENODEV; + + mac_ops = cgx_dev->mac_ops; + /* Validate the index */ + if (index >= lmac->mac_to_index_bmap.max) + return -EINVAL; + + /* ensure index is already set */ + if (!test_bit(index, lmac->mac_to_index_bmap.bmap)) + return -EINVAL; + + id = get_sequence_id_of_lmac(cgx_dev, lmac_id); + + index = id * lmac->mac_to_index_bmap.max + index; + + cfg = cgx_read(cgx_dev, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (index * 0x8))); + cfg &= ~CGX_RX_DMAC_ADR_MASK; + cfg |= mac2u64 (mac_addr); + + cgx_write(cgx_dev, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (index * 0x8)), cfg); + return 0; +} + +int cgx_lmac_addr_del(u8 cgx_id, u8 lmac_id, u8 index) +{ + struct cgx *cgx_dev = cgx_get_pdata(cgx_id); + struct lmac *lmac = lmac_pdata(lmac_id, cgx_dev); + struct mac_ops *mac_ops; + u8 mac[ETH_ALEN]; + u64 cfg; + int id; + + if (!lmac) + return -ENODEV; + + mac_ops = cgx_dev->mac_ops; + /* Validate the index */ + if (index >= lmac->mac_to_index_bmap.max) + return -EINVAL; + + /* Skip deletion for reserved index i.e. index 0 */ + if (index == 0) + return 0; + + rvu_free_rsrc(&lmac->mac_to_index_bmap, index); + + id = get_sequence_id_of_lmac(cgx_dev, lmac_id); + + index = id * lmac->mac_to_index_bmap.max + index; + + /* Read MAC address to check whether it is ucast or mcast */ + cfg = cgx_read(cgx_dev, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (index * 0x8))); + + cfg2mac(cfg, mac); + if (is_multicast_ether_addr(mac)) + lmac->mcast_filters_count--; + + if (!lmac->mcast_filters_count) { + cfg = cgx_read(cgx_dev, lmac_id, CGXX_CMRX_RX_DMAC_CTL0); + cfg &= ~GENMASK_ULL(2, 1); + cfg |= CGX_DMAC_MCAST_MODE; + cgx_write(cgx_dev, lmac_id, CGXX_CMRX_RX_DMAC_CTL0, cfg); + } + + cgx_write(cgx_dev, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (index * 0x8)), 0); + + return 0; +} + +int cgx_lmac_addr_max_entries_get(u8 cgx_id, u8 lmac_id) +{ + struct cgx *cgx_dev = cgx_get_pdata(cgx_id); + struct lmac *lmac = lmac_pdata(lmac_id, cgx_dev); + + if (lmac) + return lmac->mac_to_index_bmap.max; + + return 0; +} + u64 cgx_lmac_addr_get(u8 cgx_id, u8 lmac_id) { struct cgx *cgx_dev = cgx_get_pdata(cgx_id); + struct lmac *lmac = lmac_pdata(lmac_id, cgx_dev); struct mac_ops *mac_ops; + int index; u64 cfg; + int id; mac_ops = cgx_dev->mac_ops; - cfg = cgx_read(cgx_dev, 0, CGXX_CMRX_RX_DMAC_CAM0 + lmac_id * 0x8); + id = get_sequence_id_of_lmac(cgx_dev, lmac_id); + + index = id * lmac->mac_to_index_bmap.max; + + cfg = cgx_read(cgx_dev, 0, CGXX_CMRX_RX_DMAC_CAM0 + index * 0x8); return cfg & CGX_RX_DMAC_ADR_MASK; } @@ -297,35 +505,51 @@ int cgx_lmac_internal_loopback(void *cgxd, int lmac_id, bool enable) void cgx_lmac_promisc_config(int cgx_id, int lmac_id, bool enable) { struct cgx *cgx = cgx_get_pdata(cgx_id); + struct lmac *lmac = lmac_pdata(lmac_id, cgx); + u16 max_dmac = lmac->mac_to_index_bmap.max; struct mac_ops *mac_ops; + int index, i; u64 cfg = 0; + int id; if (!cgx) return; + id = get_sequence_id_of_lmac(cgx, lmac_id); + mac_ops = cgx->mac_ops; if (enable) { /* Enable promiscuous mode on LMAC */ cfg = cgx_read(cgx, lmac_id, CGXX_CMRX_RX_DMAC_CTL0); - cfg &= ~(CGX_DMAC_CAM_ACCEPT | CGX_DMAC_MCAST_MODE); - cfg |= CGX_DMAC_BCAST_MODE; + cfg &= ~CGX_DMAC_CAM_ACCEPT; + cfg |= (CGX_DMAC_BCAST_MODE | CGX_DMAC_MCAST_MODE); cgx_write(cgx, lmac_id, CGXX_CMRX_RX_DMAC_CTL0, cfg); - cfg = cgx_read(cgx, 0, - (CGXX_CMRX_RX_DMAC_CAM0 + lmac_id * 0x8)); - cfg &= ~CGX_DMAC_CAM_ADDR_ENABLE; - cgx_write(cgx, 0, - (CGXX_CMRX_RX_DMAC_CAM0 + lmac_id * 0x8), cfg); + for (i = 0; i < max_dmac; i++) { + index = id * max_dmac + i; + cfg = cgx_read(cgx, 0, + (CGXX_CMRX_RX_DMAC_CAM0 + index * 0x8)); + cfg &= ~CGX_DMAC_CAM_ADDR_ENABLE; + cgx_write(cgx, 0, + (CGXX_CMRX_RX_DMAC_CAM0 + index * 0x8), cfg); + } } else { /* Disable promiscuous mode */ cfg = cgx_read(cgx, lmac_id, CGXX_CMRX_RX_DMAC_CTL0); cfg |= CGX_DMAC_CAM_ACCEPT | CGX_DMAC_MCAST_MODE; cgx_write(cgx, lmac_id, CGXX_CMRX_RX_DMAC_CTL0, cfg); - cfg = cgx_read(cgx, 0, - (CGXX_CMRX_RX_DMAC_CAM0 + lmac_id * 0x8)); - cfg |= CGX_DMAC_CAM_ADDR_ENABLE; - cgx_write(cgx, 0, - (CGXX_CMRX_RX_DMAC_CAM0 + lmac_id * 0x8), cfg); + for (i = 0; i < max_dmac; i++) { + index = id * max_dmac + i; + cfg = cgx_read(cgx, 0, + (CGXX_CMRX_RX_DMAC_CAM0 + index * 0x8)); + if ((cfg & CGX_RX_DMAC_ADR_MASK) != 0) { + cfg |= CGX_DMAC_CAM_ADDR_ENABLE; + cgx_write(cgx, 0, + (CGXX_CMRX_RX_DMAC_CAM0 + + index * 0x8), + cfg); + } + } } } @@ -1234,6 +1458,15 @@ static int cgx_lmac_init(struct cgx *cgx) } lmac->cgx = cgx; + lmac->mac_to_index_bmap.max = + MAX_DMAC_ENTRIES_PER_CGX / cgx->lmac_count; + err = rvu_alloc_bitmap(&lmac->mac_to_index_bmap); + if (err) + return err; + + /* Reserve first entry for default MAC address */ + set_bit(0, lmac->mac_to_index_bmap.bmap); + init_waitqueue_head(&lmac->wq_cmd_cmplt); mutex_init(&lmac->cmd_lock); spin_lock_init(&lmac->event_cb_lock); @@ -1274,6 +1507,7 @@ static int cgx_lmac_exit(struct cgx *cgx) continue; cgx->mac_ops->mac_pause_frm_config(cgx, lmac->lmac_id, false); cgx_configure_interrupt(cgx, lmac, lmac->lmac_id, true); + kfree(lmac->mac_to_index_bmap.bmap); kfree(lmac->name); kfree(lmac); } diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h index 12521262164a..0c613f83a41c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h @@ -23,6 +23,7 @@ #define CGX_ID_MASK 0x7 #define MAX_LMAC_PER_CGX 4 +#define MAX_DMAC_ENTRIES_PER_CGX 32 #define CGX_FIFO_LEN 65536 /* 64K for both Rx & Tx */ #define CGX_OFFSET(x) ((x) * MAX_LMAC_PER_CGX) @@ -46,6 +47,7 @@ #define CGXX_CMRX_RX_DMAC_CTL0 (0x1F8 + mac_ops->csr_offset) #define CGX_DMAC_CTL0_CAM_ENABLE BIT_ULL(3) #define CGX_DMAC_CAM_ACCEPT BIT_ULL(3) +#define CGX_DMAC_MCAST_MODE_CAM BIT_ULL(2) #define CGX_DMAC_MCAST_MODE BIT_ULL(1) #define CGX_DMAC_BCAST_MODE BIT_ULL(0) #define CGXX_CMRX_RX_DMAC_CAM0 (0x200 + mac_ops->csr_offset) @@ -139,7 +141,11 @@ int cgx_get_rx_stats(void *cgxd, int lmac_id, int idx, u64 *rx_stat); int cgx_lmac_rx_tx_enable(void *cgxd, int lmac_id, bool enable); int cgx_lmac_tx_enable(void *cgxd, int lmac_id, bool enable); int cgx_lmac_addr_set(u8 cgx_id, u8 lmac_id, u8 *mac_addr); +int cgx_lmac_addr_reset(u8 cgx_id, u8 lmac_id); u64 cgx_lmac_addr_get(u8 cgx_id, u8 lmac_id); +int cgx_lmac_addr_add(u8 cgx_id, u8 lmac_id, u8 *mac_addr); +int cgx_lmac_addr_del(u8 cgx_id, u8 lmac_id, u8 index); +int cgx_lmac_addr_max_entries_get(u8 cgx_id, u8 lmac_id); void cgx_lmac_promisc_config(int cgx_id, int lmac_id, bool enable); void cgx_lmac_enadis_rx_pause_fwding(void *cgxd, int lmac_id, bool enable); int cgx_lmac_internal_loopback(void *cgxd, int lmac_id, bool enable); @@ -165,4 +171,5 @@ u8 cgx_get_lmacid(void *cgxd, u8 lmac_index); unsigned long cgx_get_lmac_bmap(void *cgxd); void cgx_lmac_write(int cgx_id, int lmac_id, u64 offset, u64 val); u64 cgx_lmac_read(int cgx_id, int lmac_id, u64 offset); +int cgx_lmac_addr_update(u8 cgx_id, u8 lmac_id, u8 *mac_addr, u8 index); #endif /* CGX_H */ diff --git a/drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h b/drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h index 45706fd87120..a8b7b1c7a1d5 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h @@ -10,17 +10,19 @@ #include "rvu.h" #include "cgx.h" /** - * struct lmac + * struct lmac - per lmac locks and properties * @wq_cmd_cmplt: waitq to keep the process blocked until cmd completion * @cmd_lock: Lock to serialize the command interface * @resp: command response * @link_info: link related information + * @mac_to_index_bmap: Mac address to CGX table index mapping * @event_cb: callback for linkchange events * @event_cb_lock: lock for serializing callback with unregister - * @cmd_pend: flag set before new command is started - * flag cleared after command response is received * @cgx: parent cgx port + * @mcast_filters_count: Number of multicast filters installed * @lmac_id: lmac port id + * @cmd_pend: flag set before new command is started + * flag cleared after command response is received * @name: lmac port name */ struct lmac { @@ -29,12 +31,14 @@ struct lmac { struct mutex cmd_lock; u64 resp; struct cgx_link_user_info link_info; + struct rsrc_bmap mac_to_index_bmap; struct cgx_event_cb event_cb; /* lock for serializing callback with unregister */ spinlock_t event_cb_lock; - bool cmd_pend; struct cgx *cgx; + u8 mcast_filters_count; u8 lmac_id; + bool cmd_pend; char *name; }; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h index 9672cbf8a90a..f5ec39de026a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h @@ -165,7 +165,15 @@ M(CGX_SET_LINK_MODE, 0x214, cgx_set_link_mode, cgx_set_link_mode_req,\ M(CGX_FEATURES_GET, 0x215, cgx_features_get, msg_req, \ cgx_features_info_msg) \ M(RPM_STATS, 0x216, rpm_stats, msg_req, rpm_stats_rsp) \ - /* NPA mbox IDs (range 0x400 - 0x5FF) */ \ +M(CGX_MAC_ADDR_ADD, 0x217, cgx_mac_addr_add, cgx_mac_addr_add_req, \ + cgx_mac_addr_add_rsp) \ +M(CGX_MAC_ADDR_DEL, 0x218, cgx_mac_addr_del, cgx_mac_addr_del_req, \ + msg_rsp) \ +M(CGX_MAC_MAX_ENTRIES_GET, 0x219, cgx_mac_max_entries_get, msg_req, \ + cgx_max_dmac_entries_get_rsp) \ +M(CGX_MAC_ADDR_RESET, 0x21A, cgx_mac_addr_reset, msg_req, msg_rsp) \ +M(CGX_MAC_ADDR_UPDATE, 0x21B, cgx_mac_addr_update, cgx_mac_addr_update_req, \ + msg_rsp) \ /* NPA mbox IDs (range 0x400 - 0x5FF) */ \ M(NPA_LF_ALLOC, 0x400, npa_lf_alloc, \ npa_lf_alloc_req, npa_lf_alloc_rsp) \ @@ -403,6 +411,38 @@ struct cgx_mac_addr_set_or_get { u8 mac_addr[ETH_ALEN]; }; +/* Structure for requesting the operation to + * add DMAC filter entry into CGX interface + */ +struct cgx_mac_addr_add_req { + struct mbox_msghdr hdr; + u8 mac_addr[ETH_ALEN]; +}; + +/* Structure for response against the operation to + * add DMAC filter entry into CGX interface + */ +struct cgx_mac_addr_add_rsp { + struct mbox_msghdr hdr; + u8 index; +}; + +/* Structure for requesting the operation to + * delete DMAC filter entry from CGX interface + */ +struct cgx_mac_addr_del_req { + struct mbox_msghdr hdr; + u8 index; +}; + +/* Structure for response against the operation to + * get maximum supported DMAC filter entries + */ +struct cgx_max_dmac_entries_get_rsp { + struct mbox_msghdr hdr; + u8 max_dmac_filters; +}; + struct cgx_link_user_info { uint64_t link_up:1; uint64_t full_duplex:1; @@ -501,6 +541,12 @@ struct cgx_set_link_mode_rsp { int status; }; +struct cgx_mac_addr_update_req { + struct mbox_msghdr hdr; + u8 mac_addr[ETH_ALEN]; + u8 index; +}; + #define RVU_LMAC_FEAT_FC BIT_ULL(0) /* pause frames */ #define RVU_LMAC_FEAT_PTP BIT_ULL(1) /* precision time protocol */ #define RVU_MAC_VERSION BIT_ULL(2) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index 3c0a7e981f72..bc0d24507033 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -657,6 +657,8 @@ void rvu_cgx_enadis_rx_bp(struct rvu *rvu, int pf, bool enable); int rvu_cgx_start_stop_io(struct rvu *rvu, u16 pcifunc, bool start); int rvu_cgx_nix_cuml_stats(struct rvu *rvu, void *cgxd, int lmac_id, int index, int rxtxflag, u64 *stat); +void rvu_cgx_disable_dmac_entries(struct rvu *rvu, u16 pcifunc); + /* NPA APIs */ int rvu_npa_init(struct rvu *rvu); void rvu_npa_freemem(struct rvu *rvu); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c index 6e2bf4fcd29c..9c6f4ba2d726 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c @@ -454,6 +454,31 @@ int rvu_cgx_config_rxtx(struct rvu *rvu, u16 pcifunc, bool start) return 0; } +void rvu_cgx_disable_dmac_entries(struct rvu *rvu, u16 pcifunc) +{ + int pf = rvu_get_pf(pcifunc); + int i = 0, lmac_count = 0; + u8 max_dmac_filters; + u8 cgx_id, lmac_id; + void *cgx_dev; + + if (!is_cgx_config_permitted(rvu, pcifunc)) + return; + + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + cgx_dev = cgx_get_pdata(cgx_id); + lmac_count = cgx_get_lmac_cnt(cgx_dev); + max_dmac_filters = MAX_DMAC_ENTRIES_PER_CGX / lmac_count; + + for (i = 0; i < max_dmac_filters; i++) + cgx_lmac_addr_del(cgx_id, lmac_id, i); + + /* As cgx_lmac_addr_del does not clear entry for index 0 + * so it needs to be done explicitly + */ + cgx_lmac_addr_reset(cgx_id, lmac_id); +} + int rvu_mbox_handler_cgx_start_rxtx(struct rvu *rvu, struct msg_req *req, struct msg_rsp *rsp) { @@ -557,6 +582,63 @@ int rvu_mbox_handler_cgx_mac_addr_set(struct rvu *rvu, return 0; } +int rvu_mbox_handler_cgx_mac_addr_add(struct rvu *rvu, + struct cgx_mac_addr_add_req *req, + struct cgx_mac_addr_add_rsp *rsp) +{ + int pf = rvu_get_pf(req->hdr.pcifunc); + u8 cgx_id, lmac_id; + int rc = 0; + + if (!is_cgx_config_permitted(rvu, req->hdr.pcifunc)) + return -EPERM; + + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + rc = cgx_lmac_addr_add(cgx_id, lmac_id, req->mac_addr); + if (rc >= 0) { + rsp->index = rc; + return 0; + } + + return rc; +} + +int rvu_mbox_handler_cgx_mac_addr_del(struct rvu *rvu, + struct cgx_mac_addr_del_req *req, + struct msg_rsp *rsp) +{ + int pf = rvu_get_pf(req->hdr.pcifunc); + u8 cgx_id, lmac_id; + + if (!is_cgx_config_permitted(rvu, req->hdr.pcifunc)) + return -EPERM; + + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + return cgx_lmac_addr_del(cgx_id, lmac_id, req->index); +} + +int rvu_mbox_handler_cgx_mac_max_entries_get(struct rvu *rvu, + struct msg_req *req, + struct cgx_max_dmac_entries_get_rsp + *rsp) +{ + int pf = rvu_get_pf(req->hdr.pcifunc); + u8 cgx_id, lmac_id; + + /* If msg is received from PFs(which are not mapped to CGX LMACs) + * or VF then no entries are allocated for DMAC filters at CGX level. + * So returning zero. + */ + if (!is_cgx_config_permitted(rvu, req->hdr.pcifunc)) { + rsp->max_dmac_filters = 0; + return 0; + } + + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + rsp->max_dmac_filters = cgx_lmac_addr_max_entries_get(cgx_id, lmac_id); + return 0; +} + int rvu_mbox_handler_cgx_mac_addr_get(struct rvu *rvu, struct cgx_mac_addr_set_or_get *req, struct cgx_mac_addr_set_or_get *rsp) @@ -953,3 +1035,30 @@ int rvu_mbox_handler_cgx_set_link_mode(struct rvu *rvu, rsp->status = cgx_set_link_mode(cgxd, req->args, cgx_idx, lmac); return 0; } + +int rvu_mbox_handler_cgx_mac_addr_reset(struct rvu *rvu, struct msg_req *req, + struct msg_rsp *rsp) +{ + int pf = rvu_get_pf(req->hdr.pcifunc); + u8 cgx_id, lmac_id; + + if (!is_cgx_config_permitted(rvu, req->hdr.pcifunc)) + return -EPERM; + + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + return cgx_lmac_addr_reset(cgx_id, lmac_id); +} + +int rvu_mbox_handler_cgx_mac_addr_update(struct rvu *rvu, + struct cgx_mac_addr_update_req *req, + struct msg_rsp *rsp) +{ + int pf = rvu_get_pf(req->hdr.pcifunc); + u8 cgx_id, lmac_id; + + if (!is_cgx_config_permitted(rvu, req->hdr.pcifunc)) + return -EPERM; + + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + return cgx_lmac_addr_update(cgx_id, lmac_id, req->mac_addr, req->index); +} diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index d6f8210652c5..aeae37704428 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -346,6 +346,9 @@ static void nix_interface_deinit(struct rvu *rvu, u16 pcifunc, u8 nixlf) /* Free and disable any MCAM entries used by this NIX LF */ rvu_npc_disable_mcam_entries(rvu, pcifunc, nixlf); + + /* Disable DMAC filters used */ + rvu_cgx_disable_dmac_entries(rvu, pcifunc); } int rvu_mbox_handler_nix_bp_disable(struct rvu *rvu, -- cgit v1.2.3-58-ga151 From dbc52debf95f8f902f74309e7ae0de38e1ed4e4c Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Wed, 30 Jun 2021 15:40:58 +0530 Subject: octeontx2-af: Debugfs support for DMAC filters Add debugfs support to display CGX/RPM DMAC filter table associated with pf. cat /sys/kernel/debug/octeontx2/cgx/cgx0/lmac0/mac_filter PCI dev RVUPF BROADCAST MULTICAST FILTER-MODE 0002:02:00.0 PF2 ACCEPT ACCEPT UNICAST DMAC-INDEX ADDRESS 0 00:0f:b7:06:17:06 1 1a:1b:1c:1d:1e:01 2 1a:1b:1c:1d:1e:02 Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 28 +++++++ drivers/net/ethernet/marvell/octeontx2/af/cgx.h | 3 + drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 1 + .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 2 +- .../ethernet/marvell/octeontx2/af/rvu_debugfs.c | 88 ++++++++++++++++++++-- 5 files changed, 113 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c index bc413f96b430..9169849881bf 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c @@ -266,6 +266,34 @@ int cgx_lmac_addr_set(u8 cgx_id, u8 lmac_id, u8 *mac_addr) return 0; } +u64 cgx_read_dmac_ctrl(void *cgxd, int lmac_id) +{ + struct mac_ops *mac_ops; + struct cgx *cgx = cgxd; + + if (!cgxd || !is_lmac_valid(cgxd, lmac_id)) + return 0; + + cgx = cgxd; + /* Get mac_ops to know csr offset */ + mac_ops = cgx->mac_ops; + + return cgx_read(cgxd, lmac_id, CGXX_CMRX_RX_DMAC_CTL0); +} + +u64 cgx_read_dmac_entry(void *cgxd, int index) +{ + struct mac_ops *mac_ops; + struct cgx *cgx; + + if (!cgxd) + return 0; + + cgx = cgxd; + mac_ops = cgx->mac_ops; + return cgx_read(cgx, 0, (CGXX_CMRX_RX_DMAC_CAM0 + (index * 8))); +} + int cgx_lmac_addr_add(u8 cgx_id, u8 lmac_id, u8 *mac_addr) { struct cgx *cgx_dev = cgx_get_pdata(cgx_id); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h index 0c613f83a41c..237ba2b56210 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h @@ -52,6 +52,7 @@ #define CGX_DMAC_BCAST_MODE BIT_ULL(0) #define CGXX_CMRX_RX_DMAC_CAM0 (0x200 + mac_ops->csr_offset) #define CGX_DMAC_CAM_ADDR_ENABLE BIT_ULL(48) +#define CGX_DMAC_CAM_ENTRY_LMACID GENMASK_ULL(50, 49) #define CGXX_CMRX_RX_DMAC_CAM1 0x400 #define CGX_RX_DMAC_ADR_MASK GENMASK_ULL(47, 0) #define CGXX_CMRX_TX_STAT0 0x700 @@ -172,4 +173,6 @@ unsigned long cgx_get_lmac_bmap(void *cgxd); void cgx_lmac_write(int cgx_id, int lmac_id, u64 offset, u64 val); u64 cgx_lmac_read(int cgx_id, int lmac_id, u64 offset); int cgx_lmac_addr_update(u8 cgx_id, u8 lmac_id, u8 *mac_addr, u8 index); +u64 cgx_read_dmac_ctrl(void *cgxd, int lmac_id); +u64 cgx_read_dmac_entry(void *cgxd, int index); #endif /* CGX_H */ diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index bc0d24507033..10e58a5d5861 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -744,6 +744,7 @@ void npc_read_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam, bool is_mac_feature_supported(struct rvu *rvu, int pf, int feature); u32 rvu_cgx_get_fifolen(struct rvu *rvu); void *rvu_first_cgx_pdata(struct rvu *rvu); +int cgxlmac_to_pf(struct rvu *rvu, int cgx_id, int lmac_id); int npc_get_nixlf_mcam_index(struct npc_mcam *mcam, u16 pcifunc, int nixlf, int type); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c index 9c6f4ba2d726..6cc8fbb7190c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c @@ -63,7 +63,7 @@ static u16 cgxlmac_to_pfmap(struct rvu *rvu, u8 cgx_id, u8 lmac_id) return rvu->cgxlmac2pf_map[CGX_OFFSET(cgx_id) + lmac_id]; } -static int cgxlmac_to_pf(struct rvu *rvu, int cgx_id, int lmac_id) +int cgxlmac_to_pf(struct rvu *rvu, int cgx_id, int lmac_id) { unsigned long pfmap; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c index 3cc3c6fd1d84..370d4ca1e5ed 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c @@ -1971,10 +1971,9 @@ static int cgx_print_stats(struct seq_file *s, int lmac_id) return err; } -static int rvu_dbg_cgx_stat_display(struct seq_file *filp, void *unused) +static int rvu_dbg_derive_lmacid(struct seq_file *filp, int *lmac_id) { struct dentry *current_dir; - int err, lmac_id; char *buf; current_dir = filp->file->f_path.dentry->d_parent; @@ -1982,17 +1981,87 @@ static int rvu_dbg_cgx_stat_display(struct seq_file *filp, void *unused) if (!buf) return -EINVAL; - err = kstrtoint(buf + 1, 10, &lmac_id); - if (!err) { - err = cgx_print_stats(filp, lmac_id); - if (err) - return err; - } + return kstrtoint(buf + 1, 10, lmac_id); +} + +static int rvu_dbg_cgx_stat_display(struct seq_file *filp, void *unused) +{ + int lmac_id, err; + + err = rvu_dbg_derive_lmacid(filp, &lmac_id); + if (!err) + return cgx_print_stats(filp, lmac_id); + return err; } RVU_DEBUG_SEQ_FOPS(cgx_stat, cgx_stat_display, NULL); +static int cgx_print_dmac_flt(struct seq_file *s, int lmac_id) +{ + struct pci_dev *pdev = NULL; + void *cgxd = s->private; + char *bcast, *mcast; + u16 index, domain; + u8 dmac[ETH_ALEN]; + struct rvu *rvu; + u64 cfg, mac; + int pf; + + rvu = pci_get_drvdata(pci_get_device(PCI_VENDOR_ID_CAVIUM, + PCI_DEVID_OCTEONTX2_RVU_AF, NULL)); + if (!rvu) + return -ENODEV; + + pf = cgxlmac_to_pf(rvu, cgx_get_cgxid(cgxd), lmac_id); + domain = 2; + + pdev = pci_get_domain_bus_and_slot(domain, pf + 1, 0); + if (!pdev) + return 0; + + cfg = cgx_read_dmac_ctrl(cgxd, lmac_id); + bcast = cfg & CGX_DMAC_BCAST_MODE ? "ACCEPT" : "REJECT"; + mcast = cfg & CGX_DMAC_MCAST_MODE ? "ACCEPT" : "REJECT"; + + seq_puts(s, + "PCI dev RVUPF BROADCAST MULTICAST FILTER-MODE\n"); + seq_printf(s, "%s PF%d %9s %9s", + dev_name(&pdev->dev), pf, bcast, mcast); + if (cfg & CGX_DMAC_CAM_ACCEPT) + seq_printf(s, "%12s\n\n", "UNICAST"); + else + seq_printf(s, "%16s\n\n", "PROMISCUOUS"); + + seq_puts(s, "\nDMAC-INDEX ADDRESS\n"); + + for (index = 0 ; index < 32 ; index++) { + cfg = cgx_read_dmac_entry(cgxd, index); + /* Display enabled dmac entries associated with current lmac */ + if (lmac_id == FIELD_GET(CGX_DMAC_CAM_ENTRY_LMACID, cfg) && + FIELD_GET(CGX_DMAC_CAM_ADDR_ENABLE, cfg)) { + mac = FIELD_GET(CGX_RX_DMAC_ADR_MASK, cfg); + u64_to_ether_addr(mac, dmac); + seq_printf(s, "%7d %pM\n", index, dmac); + } + } + + return 0; +} + +static int rvu_dbg_cgx_dmac_flt_display(struct seq_file *filp, void *unused) +{ + int err, lmac_id; + + err = rvu_dbg_derive_lmacid(filp, &lmac_id); + if (!err) + return cgx_print_dmac_flt(filp, lmac_id); + + return err; +} + +RVU_DEBUG_SEQ_FOPS(cgx_dmac_flt, cgx_dmac_flt_display, NULL); + static void rvu_dbg_cgx_init(struct rvu *rvu) { struct mac_ops *mac_ops; @@ -2029,6 +2098,9 @@ static void rvu_dbg_cgx_init(struct rvu *rvu) debugfs_create_file("stats", 0600, rvu->rvu_dbg.lmac, cgx, &rvu_dbg_cgx_stat_fops); + debugfs_create_file("mac_filter", 0600, + rvu->rvu_dbg.lmac, cgx, + &rvu_dbg_cgx_dmac_flt_fops); } } } -- cgit v1.2.3-58-ga151 From 79d2be385e9eabe4403eb85bcc7d3efc6b936a76 Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Wed, 30 Jun 2021 15:40:59 +0530 Subject: octeontx2-pf: offload DMAC filters to CGX/RPM block DMAC filtering can be achieved by either NPC MCAM rules or CGX/RPM MAC filters. Currently we are achieving this by NPC MCAM rules. This patch offloads DMAC filters to CGX/RPM MAC filters instead of NPC MCAM rules. Offloading DMAC filter to CGX/RPM block helps in reducing traffic to NPC block and save MCAM rules Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- .../net/ethernet/marvell/octeontx2/nic/Makefile | 2 +- .../ethernet/marvell/octeontx2/nic/otx2_common.c | 3 + .../ethernet/marvell/octeontx2/nic/otx2_common.h | 11 + .../ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c | 173 ++++++++++++++++ .../ethernet/marvell/octeontx2/nic/otx2_flows.c | 229 ++++++++++++++++++++- .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 9 + 6 files changed, 417 insertions(+), 10 deletions(-) create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/Makefile b/drivers/net/ethernet/marvell/octeontx2/nic/Makefile index 457c94793e63..3254b02205ca 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/Makefile +++ b/drivers/net/ethernet/marvell/octeontx2/nic/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_OCTEONTX2_PF) += rvu_nicpf.o obj-$(CONFIG_OCTEONTX2_VF) += rvu_nicvf.o rvu_nicpf-y := otx2_pf.o otx2_common.o otx2_txrx.o otx2_ethtool.o \ - otx2_ptp.o otx2_flows.o otx2_tc.o cn10k.o + otx2_ptp.o otx2_flows.o otx2_tc.o cn10k.o otx2_dmac_flt.o rvu_nicvf-y := otx2_vf.o ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c index cf7875d51d87..7cccd802c4ed 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c @@ -210,6 +210,9 @@ int otx2_set_mac_address(struct net_device *netdev, void *p) /* update dmac field in vlan offload rule */ if (pfvf->flags & OTX2_FLAG_RX_VLAN_SUPPORT) otx2_install_rxvlan_offload_flow(pfvf); + /* update dmac address in ntuple and DMAC filter list */ + if (pfvf->flags & OTX2_FLAG_DMACFLTR_SUPPORT) + otx2_dmacflt_update_pfmac_flow(pfvf); } else { return -EPERM; } diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h index 20a9c69f020f..8fd58cd07f50 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h @@ -288,6 +288,9 @@ struct otx2_flow_config { u16 tc_flower_offset; u16 ntuple_max_flows; u16 tc_max_flows; + u8 dmacflt_max_flows; + u8 *bmap_to_dmacindex; + unsigned long dmacflt_bmap; struct list_head flow_list; }; @@ -329,6 +332,7 @@ struct otx2_nic { #define OTX2_FLAG_TC_FLOWER_SUPPORT BIT_ULL(11) #define OTX2_FLAG_TC_MATCHALL_EGRESS_ENABLED BIT_ULL(12) #define OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED BIT_ULL(13) +#define OTX2_FLAG_DMACFLTR_SUPPORT BIT_ULL(14) u64 flags; struct otx2_qset qset; @@ -834,4 +838,11 @@ int otx2_init_tc(struct otx2_nic *nic); void otx2_shutdown_tc(struct otx2_nic *nic); int otx2_setup_tc(struct net_device *netdev, enum tc_setup_type type, void *type_data); +/* CGX/RPM DMAC filters support */ +int otx2_dmacflt_get_max_cnt(struct otx2_nic *pf); +int otx2_dmacflt_add(struct otx2_nic *pf, const u8 *mac, u8 bit_pos); +int otx2_dmacflt_remove(struct otx2_nic *pf, const u8 *mac, u8 bit_pos); +int otx2_dmacflt_update(struct otx2_nic *pf, u8 *mac, u8 bit_pos); +void otx2_dmacflt_reinstall_flows(struct otx2_nic *pf); +void otx2_dmacflt_update_pfmac_flow(struct otx2_nic *pfvf); #endif /* OTX2_COMMON_H */ diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c new file mode 100644 index 000000000000..ffe3e94562d0 --- /dev/null +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Marvell OcteonTx2 RVU Physcial Function ethernet driver + * + * Copyright (C) 2021 Marvell. + */ + +#include "otx2_common.h" + +static int otx2_dmacflt_do_add(struct otx2_nic *pf, const u8 *mac, + u8 *dmac_index) +{ + struct cgx_mac_addr_add_req *req; + struct cgx_mac_addr_add_rsp *rsp; + int err; + + mutex_lock(&pf->mbox.lock); + + req = otx2_mbox_alloc_msg_cgx_mac_addr_add(&pf->mbox); + if (!req) { + mutex_unlock(&pf->mbox.lock); + return -ENOMEM; + } + + ether_addr_copy(req->mac_addr, mac); + err = otx2_sync_mbox_msg(&pf->mbox); + + if (!err) { + rsp = (struct cgx_mac_addr_add_rsp *) + otx2_mbox_get_rsp(&pf->mbox.mbox, 0, &req->hdr); + *dmac_index = rsp->index; + } + + mutex_unlock(&pf->mbox.lock); + return err; +} + +static int otx2_dmacflt_add_pfmac(struct otx2_nic *pf) +{ + struct cgx_mac_addr_set_or_get *req; + int err; + + mutex_lock(&pf->mbox.lock); + + req = otx2_mbox_alloc_msg_cgx_mac_addr_set(&pf->mbox); + if (!req) { + mutex_unlock(&pf->mbox.lock); + return -ENOMEM; + } + + ether_addr_copy(req->mac_addr, pf->netdev->dev_addr); + err = otx2_sync_mbox_msg(&pf->mbox); + + mutex_unlock(&pf->mbox.lock); + return err; +} + +int otx2_dmacflt_add(struct otx2_nic *pf, const u8 *mac, u8 bit_pos) +{ + u8 *dmacindex; + + /* Store dmacindex returned by CGX/RPM driver which will + * be used for macaddr update/remove + */ + dmacindex = &pf->flow_cfg->bmap_to_dmacindex[bit_pos]; + + if (ether_addr_equal(mac, pf->netdev->dev_addr)) + return otx2_dmacflt_add_pfmac(pf); + else + return otx2_dmacflt_do_add(pf, mac, dmacindex); +} + +static int otx2_dmacflt_do_remove(struct otx2_nic *pfvf, const u8 *mac, + u8 dmac_index) +{ + struct cgx_mac_addr_del_req *req; + int err; + + mutex_lock(&pfvf->mbox.lock); + req = otx2_mbox_alloc_msg_cgx_mac_addr_del(&pfvf->mbox); + if (!req) { + mutex_unlock(&pfvf->mbox.lock); + return -ENOMEM; + } + + req->index = dmac_index; + + err = otx2_sync_mbox_msg(&pfvf->mbox); + mutex_unlock(&pfvf->mbox.lock); + + return err; +} + +static int otx2_dmacflt_remove_pfmac(struct otx2_nic *pf) +{ + struct msg_req *req; + int err; + + mutex_lock(&pf->mbox.lock); + req = otx2_mbox_alloc_msg_cgx_mac_addr_reset(&pf->mbox); + if (!req) { + mutex_unlock(&pf->mbox.lock); + return -ENOMEM; + } + + err = otx2_sync_mbox_msg(&pf->mbox); + + mutex_unlock(&pf->mbox.lock); + return err; +} + +int otx2_dmacflt_remove(struct otx2_nic *pf, const u8 *mac, + u8 bit_pos) +{ + u8 dmacindex = pf->flow_cfg->bmap_to_dmacindex[bit_pos]; + + if (ether_addr_equal(mac, pf->netdev->dev_addr)) + return otx2_dmacflt_remove_pfmac(pf); + else + return otx2_dmacflt_do_remove(pf, mac, dmacindex); +} + +/* CGX/RPM blocks support max unicast entries of 32. + * on typical configuration MAC block associated + * with 4 lmacs, each lmac will have 8 dmac entries + */ +int otx2_dmacflt_get_max_cnt(struct otx2_nic *pf) +{ + struct cgx_max_dmac_entries_get_rsp *rsp; + struct msg_req *msg; + int err; + + mutex_lock(&pf->mbox.lock); + msg = otx2_mbox_alloc_msg_cgx_mac_max_entries_get(&pf->mbox); + + if (!msg) { + mutex_unlock(&pf->mbox.lock); + return -ENOMEM; + } + + err = otx2_sync_mbox_msg(&pf->mbox); + if (err) + goto out; + + rsp = (struct cgx_max_dmac_entries_get_rsp *) + otx2_mbox_get_rsp(&pf->mbox.mbox, 0, &msg->hdr); + pf->flow_cfg->dmacflt_max_flows = rsp->max_dmac_filters; + +out: + mutex_unlock(&pf->mbox.lock); + return err; +} + +int otx2_dmacflt_update(struct otx2_nic *pf, u8 *mac, u8 bit_pos) +{ + struct cgx_mac_addr_update_req *req; + int rc; + + mutex_lock(&pf->mbox.lock); + + req = otx2_mbox_alloc_msg_cgx_mac_addr_update(&pf->mbox); + + if (!req) { + mutex_unlock(&pf->mbox.lock); + rc = -ENOMEM; + } + + ether_addr_copy(req->mac_addr, mac); + req->index = pf->flow_cfg->bmap_to_dmacindex[bit_pos]; + rc = otx2_sync_mbox_msg(&pf->mbox); + + mutex_unlock(&pf->mbox.lock); + return rc; +} diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c index 8c97106bdd1c..4d9de525802d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c @@ -18,6 +18,12 @@ struct otx2_flow { bool is_vf; u8 rss_ctx_id; int vf; + bool dmac_filter; +}; + +enum dmac_req { + DMAC_ADDR_UPDATE, + DMAC_ADDR_DEL }; static void otx2_clear_ntuple_flow_info(struct otx2_nic *pfvf, struct otx2_flow_config *flow_cfg) @@ -219,6 +225,22 @@ int otx2_mcam_flow_init(struct otx2_nic *pf) if (!pf->mac_table) return -ENOMEM; + otx2_dmacflt_get_max_cnt(pf); + + /* DMAC filters are not allocated */ + if (!pf->flow_cfg->dmacflt_max_flows) + return 0; + + pf->flow_cfg->bmap_to_dmacindex = + devm_kzalloc(pf->dev, sizeof(u8) * + pf->flow_cfg->dmacflt_max_flows, + GFP_KERNEL); + + if (!pf->flow_cfg->bmap_to_dmacindex) + return -ENOMEM; + + pf->flags |= OTX2_FLAG_DMACFLTR_SUPPORT; + return 0; } @@ -280,6 +302,12 @@ int otx2_add_macfilter(struct net_device *netdev, const u8 *mac) { struct otx2_nic *pf = netdev_priv(netdev); + if (bitmap_weight(&pf->flow_cfg->dmacflt_bmap, + pf->flow_cfg->dmacflt_max_flows)) + netdev_warn(netdev, + "Add %pM to CGX/RPM DMAC filters list as well\n", + mac); + return otx2_do_add_macfilter(pf, mac); } @@ -351,12 +379,22 @@ static void otx2_add_flow_to_list(struct otx2_nic *pfvf, struct otx2_flow *flow) list_add(&flow->list, head); } +static int otx2_get_maxflows(struct otx2_flow_config *flow_cfg) +{ + if (flow_cfg->nr_flows == flow_cfg->ntuple_max_flows || + bitmap_weight(&flow_cfg->dmacflt_bmap, + flow_cfg->dmacflt_max_flows)) + return flow_cfg->ntuple_max_flows + flow_cfg->dmacflt_max_flows; + else + return flow_cfg->ntuple_max_flows; +} + int otx2_get_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc, u32 location) { struct otx2_flow *iter; - if (location >= pfvf->flow_cfg->ntuple_max_flows) + if (location >= otx2_get_maxflows(pfvf->flow_cfg)) return -EINVAL; list_for_each_entry(iter, &pfvf->flow_cfg->flow_list, list) { @@ -378,7 +416,7 @@ int otx2_get_all_flows(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc, int idx = 0; int err = 0; - nfc->data = pfvf->flow_cfg->ntuple_max_flows; + nfc->data = otx2_get_maxflows(pfvf->flow_cfg); while ((!err || err == -ENOENT) && idx < rule_cnt) { err = otx2_get_flow(pfvf, nfc, location); if (!err) @@ -760,6 +798,32 @@ int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp, return 0; } +static int otx2_is_flow_rule_dmacfilter(struct otx2_nic *pfvf, + struct ethtool_rx_flow_spec *fsp) +{ + struct ethhdr *eth_mask = &fsp->m_u.ether_spec; + struct ethhdr *eth_hdr = &fsp->h_u.ether_spec; + u64 ring_cookie = fsp->ring_cookie; + u32 flow_type; + + if (!(pfvf->flags & OTX2_FLAG_DMACFLTR_SUPPORT)) + return false; + + flow_type = fsp->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT | FLOW_RSS); + + /* CGX/RPM block dmac filtering configured for white listing + * check for action other than DROP + */ + if (flow_type == ETHER_FLOW && ring_cookie != RX_CLS_FLOW_DISC && + !ethtool_get_flow_spec_ring_vf(ring_cookie)) { + if (is_zero_ether_addr(eth_mask->h_dest) && + is_valid_ether_addr(eth_hdr->h_dest)) + return true; + } + + return false; +} + static int otx2_add_flow_msg(struct otx2_nic *pfvf, struct otx2_flow *flow) { u64 ring_cookie = flow->flow_spec.ring_cookie; @@ -818,14 +882,46 @@ static int otx2_add_flow_msg(struct otx2_nic *pfvf, struct otx2_flow *flow) return err; } +static int otx2_add_flow_with_pfmac(struct otx2_nic *pfvf, + struct otx2_flow *flow) +{ + struct otx2_flow *pf_mac; + struct ethhdr *eth_hdr; + + pf_mac = kzalloc(sizeof(*pf_mac), GFP_KERNEL); + if (!pf_mac) + return -ENOMEM; + + pf_mac->entry = 0; + pf_mac->dmac_filter = true; + pf_mac->location = pfvf->flow_cfg->ntuple_max_flows; + memcpy(&pf_mac->flow_spec, &flow->flow_spec, + sizeof(struct ethtool_rx_flow_spec)); + pf_mac->flow_spec.location = pf_mac->location; + + /* Copy PF mac address */ + eth_hdr = &pf_mac->flow_spec.h_u.ether_spec; + ether_addr_copy(eth_hdr->h_dest, pfvf->netdev->dev_addr); + + /* Install DMAC filter with PF mac address */ + otx2_dmacflt_add(pfvf, eth_hdr->h_dest, 0); + + otx2_add_flow_to_list(pfvf, pf_mac); + pfvf->flow_cfg->nr_flows++; + set_bit(0, &pfvf->flow_cfg->dmacflt_bmap); + + return 0; +} + int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) { struct otx2_flow_config *flow_cfg = pfvf->flow_cfg; struct ethtool_rx_flow_spec *fsp = &nfc->fs; struct otx2_flow *flow; + struct ethhdr *eth_hdr; bool new = false; + int err = 0; u32 ring; - int err; ring = ethtool_get_flow_spec_ring(fsp->ring_cookie); if (!(pfvf->flags & OTX2_FLAG_NTUPLE_SUPPORT)) @@ -834,16 +930,15 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) if (ring >= pfvf->hw.rx_queues && fsp->ring_cookie != RX_CLS_FLOW_DISC) return -EINVAL; - if (fsp->location >= flow_cfg->ntuple_max_flows) + if (fsp->location >= otx2_get_maxflows(flow_cfg)) return -EINVAL; flow = otx2_find_flow(pfvf, fsp->location); if (!flow) { - flow = kzalloc(sizeof(*flow), GFP_ATOMIC); + flow = kzalloc(sizeof(*flow), GFP_KERNEL); if (!flow) return -ENOMEM; flow->location = fsp->location; - flow->entry = flow_cfg->flow_ent[flow->location]; new = true; } /* struct copy */ @@ -852,7 +947,54 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) if (fsp->flow_type & FLOW_RSS) flow->rss_ctx_id = nfc->rss_context; - err = otx2_add_flow_msg(pfvf, flow); + if (otx2_is_flow_rule_dmacfilter(pfvf, &flow->flow_spec)) { + eth_hdr = &flow->flow_spec.h_u.ether_spec; + + /* Sync dmac filter table with updated fields */ + if (flow->dmac_filter) + return otx2_dmacflt_update(pfvf, eth_hdr->h_dest, + flow->entry); + + if (bitmap_full(&flow_cfg->dmacflt_bmap, + flow_cfg->dmacflt_max_flows)) { + netdev_warn(pfvf->netdev, + "Can't insert the rule %d as max allowed dmac filters are %d\n", + flow->location + + flow_cfg->dmacflt_max_flows, + flow_cfg->dmacflt_max_flows); + err = -EINVAL; + if (new) + kfree(flow); + return err; + } + + /* Install PF mac address to DMAC filter list */ + if (!test_bit(0, &flow_cfg->dmacflt_bmap)) + otx2_add_flow_with_pfmac(pfvf, flow); + + flow->dmac_filter = true; + flow->entry = find_first_zero_bit(&flow_cfg->dmacflt_bmap, + flow_cfg->dmacflt_max_flows); + fsp->location = flow_cfg->ntuple_max_flows + flow->entry; + flow->flow_spec.location = fsp->location; + flow->location = fsp->location; + + set_bit(flow->entry, &flow_cfg->dmacflt_bmap); + otx2_dmacflt_add(pfvf, eth_hdr->h_dest, flow->entry); + + } else { + if (flow->location >= pfvf->flow_cfg->ntuple_max_flows) { + netdev_warn(pfvf->netdev, + "Can't insert non dmac ntuple rule at %d, allowed range %d-0\n", + flow->location, + flow_cfg->ntuple_max_flows - 1); + err = -EINVAL; + } else { + flow->entry = flow_cfg->flow_ent[flow->location]; + err = otx2_add_flow_msg(pfvf, flow); + } + } + if (err) { if (new) kfree(flow); @@ -890,20 +1032,70 @@ static int otx2_remove_flow_msg(struct otx2_nic *pfvf, u16 entry, bool all) return err; } +static void otx2_update_rem_pfmac(struct otx2_nic *pfvf, int req) +{ + struct otx2_flow *iter; + struct ethhdr *eth_hdr; + bool found = false; + + list_for_each_entry(iter, &pfvf->flow_cfg->flow_list, list) { + if (iter->dmac_filter && iter->entry == 0) { + eth_hdr = &iter->flow_spec.h_u.ether_spec; + if (req == DMAC_ADDR_DEL) { + otx2_dmacflt_remove(pfvf, eth_hdr->h_dest, + 0); + clear_bit(0, &pfvf->flow_cfg->dmacflt_bmap); + found = true; + } else { + ether_addr_copy(eth_hdr->h_dest, + pfvf->netdev->dev_addr); + otx2_dmacflt_update(pfvf, eth_hdr->h_dest, 0); + } + break; + } + } + + if (found) { + list_del(&iter->list); + kfree(iter); + pfvf->flow_cfg->nr_flows--; + } +} + int otx2_remove_flow(struct otx2_nic *pfvf, u32 location) { struct otx2_flow_config *flow_cfg = pfvf->flow_cfg; struct otx2_flow *flow; int err; - if (location >= flow_cfg->ntuple_max_flows) + if (location >= otx2_get_maxflows(flow_cfg)) return -EINVAL; flow = otx2_find_flow(pfvf, location); if (!flow) return -ENOENT; - err = otx2_remove_flow_msg(pfvf, flow->entry, false); + if (flow->dmac_filter) { + struct ethhdr *eth_hdr = &flow->flow_spec.h_u.ether_spec; + + /* user not allowed to remove dmac filter with interface mac */ + if (ether_addr_equal(pfvf->netdev->dev_addr, eth_hdr->h_dest)) + return -EPERM; + + err = otx2_dmacflt_remove(pfvf, eth_hdr->h_dest, + flow->entry); + clear_bit(flow->entry, &flow_cfg->dmacflt_bmap); + /* If all dmac filters are removed delete macfilter with + * interface mac address and configure CGX/RPM block in + * promiscuous mode + */ + if (bitmap_weight(&flow_cfg->dmacflt_bmap, + flow_cfg->dmacflt_max_flows) == 1) + otx2_update_rem_pfmac(pfvf, DMAC_ADDR_DEL); + } else { + err = otx2_remove_flow_msg(pfvf, flow->entry, false); + } + if (err) return err; @@ -1100,3 +1292,22 @@ int otx2_enable_rxvlan(struct otx2_nic *pf, bool enable) mutex_unlock(&pf->mbox.lock); return rsp_hdr->rc; } + +void otx2_dmacflt_reinstall_flows(struct otx2_nic *pf) +{ + struct otx2_flow *iter; + struct ethhdr *eth_hdr; + + list_for_each_entry(iter, &pf->flow_cfg->flow_list, list) { + if (iter->dmac_filter) { + eth_hdr = &iter->flow_spec.h_u.ether_spec; + otx2_dmacflt_add(pf, eth_hdr->h_dest, + iter->entry); + } + } +} + +void otx2_dmacflt_update_pfmac_flow(struct otx2_nic *pfvf) +{ + otx2_update_rem_pfmac(pfvf, DMAC_ADDR_UPDATE); +} diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 088c28df849d..f300b807a85b 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1110,6 +1110,11 @@ static int otx2_cgx_config_loopback(struct otx2_nic *pf, bool enable) struct msg_req *msg; int err; + if (enable && bitmap_weight(&pf->flow_cfg->dmacflt_bmap, + pf->flow_cfg->dmacflt_max_flows)) + netdev_warn(pf->netdev, + "CGX/RPM internal loopback might not work as DMAC filters are active\n"); + mutex_lock(&pf->mbox.lock); if (enable) msg = otx2_mbox_alloc_msg_cgx_intlbk_enable(&pf->mbox); @@ -1644,6 +1649,10 @@ int otx2_open(struct net_device *netdev) /* Restore pause frame settings */ otx2_config_pause_frm(pf); + /* Install DMAC Filters */ + if (pf->flags & OTX2_FLAG_DMACFLTR_SUPPORT) + otx2_dmacflt_reinstall_flows(pf); + err = otx2_rxtx_enable(pf, true); if (err) goto err_tx_stop_queues; -- cgit v1.2.3-58-ga151 From 856a5c97268d474282360c8a3cf4f37f6036dbec Mon Sep 17 00:00:00 2001 From: M Chetan Kumar Date: Thu, 1 Jul 2021 20:37:06 +0530 Subject: net: wwan: iosm: fix uevent reporting Change uevent env variable name to IOSM_EVENT & correct reporting format to key=value pair. Signed-off-by: M Chetan Kumar Signed-off-by: David S. Miller --- drivers/net/wwan/iosm/iosm_ipc_uevent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wwan/iosm/iosm_ipc_uevent.c b/drivers/net/wwan/iosm/iosm_ipc_uevent.c index 2229d752926c..d12188ffed7e 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_uevent.c +++ b/drivers/net/wwan/iosm/iosm_ipc_uevent.c @@ -37,7 +37,7 @@ void ipc_uevent_send(struct device *dev, char *uevent) /* Store the device and event information */ info->dev = dev; - snprintf(info->uevent, MAX_UEVENT_LEN, "%s: %s", dev_name(dev), uevent); + snprintf(info->uevent, MAX_UEVENT_LEN, "IOSM_EVENT=%s", uevent); /* Schedule uevent in process context using work queue */ schedule_work(&info->work); -- cgit v1.2.3-58-ga151 From 3bcfc0a2d3199d0a83d47ed67ad57a1c2f5a16d7 Mon Sep 17 00:00:00 2001 From: M Chetan Kumar Date: Thu, 1 Jul 2021 20:37:31 +0530 Subject: net: wwan: iosm: remove reduandant check Remove reduandant IP session id check since required checks are in place under caller. Signed-off-by: M Chetan Kumar Signed-off-by: David S. Miller --- drivers/net/wwan/iosm/iosm_ipc_imem_ops.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c index 46f76e8aae92..e4e9461b603e 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c +++ b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c @@ -24,15 +24,7 @@ int ipc_imem_sys_wwan_open(struct iosm_imem *ipc_imem, int if_id) return -EIO; } - /* check for the interafce id - * if if_id 1 to 8 then create IP MUX channel sessions. - * To start MUX session from 0 as network interface id would start - * from 1 so map it to if_id = if_id - 1 - */ - if (if_id >= IP_MUX_SESSION_START && if_id <= IP_MUX_SESSION_END) - return ipc_mux_open_session(ipc_imem->mux, if_id - 1); - - return -EINVAL; + return ipc_mux_open_session(ipc_imem->mux, if_id - 1); } /* Release a net link to CP. */ @@ -83,13 +75,8 @@ int ipc_imem_sys_wwan_transmit(struct iosm_imem *ipc_imem, goto out; } - if (if_id >= IP_MUX_SESSION_START && if_id <= IP_MUX_SESSION_END) - /* Route the UL packet through IP MUX Layer */ - ret = ipc_mux_ul_trigger_encode(ipc_imem->mux, - if_id - 1, skb); - else - dev_err(ipc_imem->dev, - "invalid if_id %d: ", if_id); + /* Route the UL packet through IP MUX Layer */ + ret = ipc_mux_ul_trigger_encode(ipc_imem->mux, if_id - 1, skb); out: return ret; } -- cgit v1.2.3-58-ga151 From 5bb4eea0c5f5b9383a543293966bdf20e54988aa Mon Sep 17 00:00:00 2001 From: M Chetan Kumar Date: Thu, 1 Jul 2021 20:37:45 +0530 Subject: net: wwan: iosm: correct link-id handling Link ID to be kept intact with MBIM session ID Ex: ID 0 should be associated to MBIM session ID 0. Reported-by: Loic Poulain Signed-off-by: M Chetan Kumar Signed-off-by: David S. Miller --- drivers/net/wwan/iosm/iosm_ipc_imem_ops.c | 6 +++--- drivers/net/wwan/iosm/iosm_ipc_imem_ops.h | 6 +++--- drivers/net/wwan/iosm/iosm_ipc_mux_codec.c | 2 +- drivers/net/wwan/iosm/iosm_ipc_wwan.c | 4 ++-- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c index e4e9461b603e..0a472ce77370 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c +++ b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c @@ -24,7 +24,7 @@ int ipc_imem_sys_wwan_open(struct iosm_imem *ipc_imem, int if_id) return -EIO; } - return ipc_mux_open_session(ipc_imem->mux, if_id - 1); + return ipc_mux_open_session(ipc_imem->mux, if_id); } /* Release a net link to CP. */ @@ -33,7 +33,7 @@ void ipc_imem_sys_wwan_close(struct iosm_imem *ipc_imem, int if_id, { if (ipc_imem->mux && if_id >= IP_MUX_SESSION_START && if_id <= IP_MUX_SESSION_END) - ipc_mux_close_session(ipc_imem->mux, if_id - 1); + ipc_mux_close_session(ipc_imem->mux, if_id); } /* Tasklet call to do uplink transfer. */ @@ -76,7 +76,7 @@ int ipc_imem_sys_wwan_transmit(struct iosm_imem *ipc_imem, } /* Route the UL packet through IP MUX Layer */ - ret = ipc_mux_ul_trigger_encode(ipc_imem->mux, if_id - 1, skb); + ret = ipc_mux_ul_trigger_encode(ipc_imem->mux, if_id, skb); out: return ret; } diff --git a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.h b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.h index fd356dafbdd6..2007fe23e9a5 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.h +++ b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.h @@ -27,11 +27,11 @@ #define BOOT_CHECK_DEFAULT_TIMEOUT 400 /* IP MUX channel range */ -#define IP_MUX_SESSION_START 1 -#define IP_MUX_SESSION_END 8 +#define IP_MUX_SESSION_START 0 +#define IP_MUX_SESSION_END 7 /* Default IP MUX channel */ -#define IP_MUX_SESSION_DEFAULT 1 +#define IP_MUX_SESSION_DEFAULT 0 /** * ipc_imem_sys_port_open - Open a port link to CP. diff --git a/drivers/net/wwan/iosm/iosm_ipc_mux_codec.c b/drivers/net/wwan/iosm/iosm_ipc_mux_codec.c index e634ffc6ec08..562de275797a 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_mux_codec.c +++ b/drivers/net/wwan/iosm/iosm_ipc_mux_codec.c @@ -288,7 +288,7 @@ static int ipc_mux_net_receive(struct iosm_mux *ipc_mux, int if_id, /* Pass the packet to the netif layer. */ dest_skb->priority = service_class; - return ipc_wwan_receive(wwan, dest_skb, false, if_id + 1); + return ipc_wwan_receive(wwan, dest_skb, false, if_id); } /* Decode Flow Credit Table in the block */ diff --git a/drivers/net/wwan/iosm/iosm_ipc_wwan.c b/drivers/net/wwan/iosm/iosm_ipc_wwan.c index c999c64001f4..84e37c4b0f74 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_wwan.c +++ b/drivers/net/wwan/iosm/iosm_ipc_wwan.c @@ -252,8 +252,8 @@ int ipc_wwan_receive(struct iosm_wwan *ipc_wwan, struct sk_buff *skb_arg, skb->pkt_type = PACKET_HOST; - if (if_id < (IP_MUX_SESSION_START - 1) || - if_id > (IP_MUX_SESSION_END - 1)) { + if (if_id < IP_MUX_SESSION_START || + if_id > IP_MUX_SESSION_END) { ret = -EINVAL; goto free; } -- cgit v1.2.3-58-ga151 From c302e3a1c86f78421d58ef564ba22519b0b039c0 Mon Sep 17 00:00:00 2001 From: M Chetan Kumar Date: Thu, 1 Jul 2021 20:39:17 +0530 Subject: net: wwan: iosm: fix netdev tx stats Update tx stats on successful packet consume, drop. Signed-off-by: M Chetan Kumar Signed-off-by: David S. Miller --- drivers/net/wwan/iosm/iosm_ipc_wwan.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wwan/iosm/iosm_ipc_wwan.c b/drivers/net/wwan/iosm/iosm_ipc_wwan.c index 84e37c4b0f74..e0c19c59c5f6 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_wwan.c +++ b/drivers/net/wwan/iosm/iosm_ipc_wwan.c @@ -107,6 +107,7 @@ static int ipc_wwan_link_transmit(struct sk_buff *skb, { struct iosm_netdev_priv *priv = wwan_netdev_drvpriv(netdev); struct iosm_wwan *ipc_wwan = priv->ipc_wwan; + unsigned int len = skb->len; int if_id = priv->if_id; int ret; @@ -123,6 +124,8 @@ static int ipc_wwan_link_transmit(struct sk_buff *skb, /* Return code of zero is success */ if (ret == 0) { + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += len; ret = NETDEV_TX_OK; } else if (ret == -EBUSY) { ret = NETDEV_TX_BUSY; @@ -140,7 +143,8 @@ exit: ret); dev_kfree_skb_any(skb); - return ret; + netdev->stats.tx_dropped++; + return NETDEV_TX_OK; } /* Ops structure for wwan net link */ -- cgit v1.2.3-58-ga151 From d7340f46beae05227f5f4a1c8cb18e81e0c3fe0e Mon Sep 17 00:00:00 2001 From: M Chetan Kumar Date: Thu, 1 Jul 2021 20:39:34 +0530 Subject: net: wwan: iosm: set default mtu Set netdev default mtu size to 1500. Signed-off-by: M Chetan Kumar Signed-off-by: David S. Miller --- drivers/net/wwan/iosm/iosm_ipc_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wwan/iosm/iosm_ipc_wwan.c b/drivers/net/wwan/iosm/iosm_ipc_wwan.c index e0c19c59c5f6..b2357ad5d517 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_wwan.c +++ b/drivers/net/wwan/iosm/iosm_ipc_wwan.c @@ -162,6 +162,7 @@ static void ipc_wwan_setup(struct net_device *iosm_dev) iosm_dev->priv_flags |= IFF_NO_QUEUE; iosm_dev->type = ARPHRD_NONE; + iosm_dev->mtu = ETH_DATA_LEN; iosm_dev->min_mtu = ETH_MIN_MTU; iosm_dev->max_mtu = ETH_MAX_MTU; -- cgit v1.2.3-58-ga151 From 5d43f951b1ac797450bb4d230fdc960b739bea04 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 30 Jun 2021 16:11:52 +0800 Subject: ptp: add ptp virtual clock driver framework This patch is to add ptp virtual clock driver framework utilizing timecounter/cyclecounter. The patch just exports two essential APIs for PTP driver. - ptp_vclock_register() - ptp_vclock_unregister() Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- drivers/ptp/Makefile | 2 +- drivers/ptp/ptp_private.h | 15 ++++ drivers/ptp/ptp_vclock.c | 150 +++++++++++++++++++++++++++++++++++++++ include/linux/ptp_clock_kernel.h | 4 +- 4 files changed, 169 insertions(+), 2 deletions(-) create mode 100644 drivers/ptp/ptp_vclock.c (limited to 'drivers') diff --git a/drivers/ptp/Makefile b/drivers/ptp/Makefile index 8673d1743faa..28a6fe342d3e 100644 --- a/drivers/ptp/Makefile +++ b/drivers/ptp/Makefile @@ -3,7 +3,7 @@ # Makefile for PTP 1588 clock support. # -ptp-y := ptp_clock.o ptp_chardev.o ptp_sysfs.o +ptp-y := ptp_clock.o ptp_chardev.o ptp_sysfs.o ptp_vclock.o ptp_kvm-$(CONFIG_X86) := ptp_kvm_x86.o ptp_kvm_common.o ptp_kvm-$(CONFIG_HAVE_ARM_SMCCC) := ptp_kvm_arm.o ptp_kvm_common.o obj-$(CONFIG_PTP_1588_CLOCK) += ptp.o diff --git a/drivers/ptp/ptp_private.h b/drivers/ptp/ptp_private.h index 6b97155148f1..853b79b6b30e 100644 --- a/drivers/ptp/ptp_private.h +++ b/drivers/ptp/ptp_private.h @@ -48,6 +48,19 @@ struct ptp_clock { struct kthread_delayed_work aux_work; }; +#define info_to_vclock(d) container_of((d), struct ptp_vclock, info) +#define cc_to_vclock(d) container_of((d), struct ptp_vclock, cc) +#define dw_to_vclock(d) container_of((d), struct ptp_vclock, refresh_work) + +struct ptp_vclock { + struct ptp_clock *pclock; + struct ptp_clock_info info; + struct ptp_clock *clock; + struct cyclecounter cc; + struct timecounter tc; + spinlock_t lock; /* protects tc/cc */ +}; + /* * The function queue_cnt() is safe for readers to call without * holding q->lock. Readers use this function to verify that the queue @@ -89,4 +102,6 @@ extern const struct attribute_group *ptp_groups[]; int ptp_populate_pin_groups(struct ptp_clock *ptp); void ptp_cleanup_pin_groups(struct ptp_clock *ptp); +struct ptp_vclock *ptp_vclock_register(struct ptp_clock *pclock); +void ptp_vclock_unregister(struct ptp_vclock *vclock); #endif diff --git a/drivers/ptp/ptp_vclock.c b/drivers/ptp/ptp_vclock.c new file mode 100644 index 000000000000..fc9205cc504d --- /dev/null +++ b/drivers/ptp/ptp_vclock.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * PTP virtual clock driver + * + * Copyright 2021 NXP + */ +#include +#include "ptp_private.h" + +#define PTP_VCLOCK_CC_SHIFT 31 +#define PTP_VCLOCK_CC_MULT (1 << PTP_VCLOCK_CC_SHIFT) +#define PTP_VCLOCK_FADJ_SHIFT 9 +#define PTP_VCLOCK_FADJ_DENOMINATOR 15625ULL +#define PTP_VCLOCK_REFRESH_INTERVAL (HZ * 2) + +static int ptp_vclock_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) +{ + struct ptp_vclock *vclock = info_to_vclock(ptp); + unsigned long flags; + s64 adj; + + adj = (s64)scaled_ppm << PTP_VCLOCK_FADJ_SHIFT; + adj = div_s64(adj, PTP_VCLOCK_FADJ_DENOMINATOR); + + spin_lock_irqsave(&vclock->lock, flags); + timecounter_read(&vclock->tc); + vclock->cc.mult = PTP_VCLOCK_CC_MULT + adj; + spin_unlock_irqrestore(&vclock->lock, flags); + + return 0; +} + +static int ptp_vclock_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct ptp_vclock *vclock = info_to_vclock(ptp); + unsigned long flags; + + spin_lock_irqsave(&vclock->lock, flags); + timecounter_adjtime(&vclock->tc, delta); + spin_unlock_irqrestore(&vclock->lock, flags); + + return 0; +} + +static int ptp_vclock_gettime(struct ptp_clock_info *ptp, + struct timespec64 *ts) +{ + struct ptp_vclock *vclock = info_to_vclock(ptp); + unsigned long flags; + u64 ns; + + spin_lock_irqsave(&vclock->lock, flags); + ns = timecounter_read(&vclock->tc); + spin_unlock_irqrestore(&vclock->lock, flags); + *ts = ns_to_timespec64(ns); + + return 0; +} + +static int ptp_vclock_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct ptp_vclock *vclock = info_to_vclock(ptp); + u64 ns = timespec64_to_ns(ts); + unsigned long flags; + + spin_lock_irqsave(&vclock->lock, flags); + timecounter_init(&vclock->tc, &vclock->cc, ns); + spin_unlock_irqrestore(&vclock->lock, flags); + + return 0; +} + +static long ptp_vclock_refresh(struct ptp_clock_info *ptp) +{ + struct ptp_vclock *vclock = info_to_vclock(ptp); + struct timespec64 ts; + + ptp_vclock_gettime(&vclock->info, &ts); + + return PTP_VCLOCK_REFRESH_INTERVAL; +} + +static const struct ptp_clock_info ptp_vclock_info = { + .owner = THIS_MODULE, + .name = "ptp virtual clock", + /* The maximum ppb value that long scaled_ppm can support */ + .max_adj = 32767999, + .adjfine = ptp_vclock_adjfine, + .adjtime = ptp_vclock_adjtime, + .gettime64 = ptp_vclock_gettime, + .settime64 = ptp_vclock_settime, + .do_aux_work = ptp_vclock_refresh, +}; + +static u64 ptp_vclock_read(const struct cyclecounter *cc) +{ + struct ptp_vclock *vclock = cc_to_vclock(cc); + struct ptp_clock *ptp = vclock->pclock; + struct timespec64 ts = {}; + + if (ptp->info->gettimex64) + ptp->info->gettimex64(ptp->info, &ts, NULL); + else + ptp->info->gettime64(ptp->info, &ts); + + return timespec64_to_ns(&ts); +} + +static const struct cyclecounter ptp_vclock_cc = { + .read = ptp_vclock_read, + .mask = CYCLECOUNTER_MASK(32), + .mult = PTP_VCLOCK_CC_MULT, + .shift = PTP_VCLOCK_CC_SHIFT, +}; + +struct ptp_vclock *ptp_vclock_register(struct ptp_clock *pclock) +{ + struct ptp_vclock *vclock; + + vclock = kzalloc(sizeof(*vclock), GFP_KERNEL); + if (!vclock) + return NULL; + + vclock->pclock = pclock; + vclock->info = ptp_vclock_info; + vclock->cc = ptp_vclock_cc; + + snprintf(vclock->info.name, PTP_CLOCK_NAME_LEN, "ptp%d_virt", + pclock->index); + + spin_lock_init(&vclock->lock); + + vclock->clock = ptp_clock_register(&vclock->info, &pclock->dev); + if (IS_ERR_OR_NULL(vclock->clock)) { + kfree(vclock); + return NULL; + } + + timecounter_init(&vclock->tc, &vclock->cc, 0); + ptp_schedule_worker(vclock->clock, PTP_VCLOCK_REFRESH_INTERVAL); + + return vclock; +} + +void ptp_vclock_unregister(struct ptp_vclock *vclock) +{ + ptp_clock_unregister(vclock->clock); + kfree(vclock); +} diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h index aba237c0b3a2..b6fb771ee524 100644 --- a/include/linux/ptp_clock_kernel.h +++ b/include/linux/ptp_clock_kernel.h @@ -11,7 +11,9 @@ #include #include #include +#include +#define PTP_CLOCK_NAME_LEN 32 /** * struct ptp_clock_request - request PTP clock event * @@ -134,7 +136,7 @@ struct ptp_system_timestamp { struct ptp_clock_info { struct module *owner; - char name[16]; + char name[PTP_CLOCK_NAME_LEN]; s32 max_adj; int n_alarm; int n_ext_ts; -- cgit v1.2.3-58-ga151 From 73f37068d540eba5f93ba3a0019bf479d35ebd76 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 30 Jun 2021 16:11:53 +0800 Subject: ptp: support ptp physical/virtual clocks conversion Support ptp physical/virtual clocks conversion via sysfs. There will be a new attribute n_vclocks under ptp physical clock sysfs. - In default, the value is 0 meaning only ptp physical clock is in use. - Setting the value can create corresponding number of ptp virtual clocks to use. But current physical clock is guaranteed to stay free running. - Setting the value back to 0 can delete virtual clocks and back use physical clock again. Another new attribute max_vclocks control the maximum number of ptp vclocks. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- Documentation/ABI/testing/sysfs-ptp | 20 ++++++ drivers/ptp/ptp_clock.c | 26 +++++++ drivers/ptp/ptp_private.h | 21 ++++++ drivers/ptp/ptp_sysfs.c | 138 ++++++++++++++++++++++++++++++++++++ 4 files changed, 205 insertions(+) (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp index 2363ad810ddb..d378f57c1b73 100644 --- a/Documentation/ABI/testing/sysfs-ptp +++ b/Documentation/ABI/testing/sysfs-ptp @@ -33,6 +33,13 @@ Description: frequency adjustment value (a positive integer) in parts per billion. +What: /sys/class/ptp/ptpN/max_vclocks +Date: May 2021 +Contact: Yangbo Lu +Description: + This file contains the maximum number of ptp vclocks. + Write integer to re-configure it. + What: /sys/class/ptp/ptpN/n_alarms Date: September 2010 Contact: Richard Cochran @@ -61,6 +68,19 @@ Description: This file contains the number of programmable pins offered by the PTP hardware clock. +What: /sys/class/ptp/ptpN/n_vclocks +Date: May 2021 +Contact: Yangbo Lu +Description: + This file contains the number of virtual PTP clocks in + use. By default, the value is 0 meaning that only the + physical clock is in use. Setting the value creates + the corresponding number of virtual clocks and causes + the physical clock to become free running. Setting the + value back to 0 deletes the virtual clocks and + switches the physical clock back to normal, adjustable + operation. + What: /sys/class/ptp/ptpN/pins Date: March 2014 Contact: Richard Cochran diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index a23a37a4d5dc..7334f478dde7 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -76,6 +76,11 @@ static int ptp_clock_settime(struct posix_clock *pc, const struct timespec64 *tp { struct ptp_clock *ptp = container_of(pc, struct ptp_clock, clock); + if (ptp_vclock_in_use(ptp)) { + pr_err("ptp: virtual clock in use\n"); + return -EBUSY; + } + return ptp->info->settime64(ptp->info, tp); } @@ -97,6 +102,11 @@ static int ptp_clock_adjtime(struct posix_clock *pc, struct __kernel_timex *tx) struct ptp_clock_info *ops; int err = -EOPNOTSUPP; + if (ptp_vclock_in_use(ptp)) { + pr_err("ptp: virtual clock in use\n"); + return -EBUSY; + } + ops = ptp->info; if (tx->modes & ADJ_SETOFFSET) { @@ -161,6 +171,7 @@ static void ptp_clock_release(struct device *dev) ptp_cleanup_pin_groups(ptp); mutex_destroy(&ptp->tsevq_mux); mutex_destroy(&ptp->pincfg_mux); + mutex_destroy(&ptp->n_vclocks_mux); ida_simple_remove(&ptp_clocks_map, ptp->index); kfree(ptp); } @@ -208,6 +219,7 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, spin_lock_init(&ptp->tsevq.lock); mutex_init(&ptp->tsevq_mux); mutex_init(&ptp->pincfg_mux); + mutex_init(&ptp->n_vclocks_mux); init_waitqueue_head(&ptp->tsev_wq); if (ptp->info->do_aux_work) { @@ -221,6 +233,14 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, ptp->pps_source->lookup_cookie = ptp; } + /* PTP virtual clock is being registered under physical clock */ + if (parent->class && parent->class->name && + strcmp(parent->class->name, "ptp") == 0) + ptp->is_virtual_clock = true; + + if (!ptp->is_virtual_clock) + ptp->max_vclocks = PTP_DEFAULT_MAX_VCLOCKS; + err = ptp_populate_pin_groups(ptp); if (err) goto no_pin_groups; @@ -270,6 +290,7 @@ no_pin_groups: kworker_err: mutex_destroy(&ptp->tsevq_mux); mutex_destroy(&ptp->pincfg_mux); + mutex_destroy(&ptp->n_vclocks_mux); ida_simple_remove(&ptp_clocks_map, index); no_slot: kfree(ptp); @@ -280,6 +301,11 @@ EXPORT_SYMBOL(ptp_clock_register); int ptp_clock_unregister(struct ptp_clock *ptp) { + if (ptp_vclock_in_use(ptp)) { + pr_err("ptp: virtual clock in use\n"); + return -EBUSY; + } + ptp->defunct = 1; wake_up_interruptible(&ptp->tsev_wq); diff --git a/drivers/ptp/ptp_private.h b/drivers/ptp/ptp_private.h index 853b79b6b30e..87cb55953b69 100644 --- a/drivers/ptp/ptp_private.h +++ b/drivers/ptp/ptp_private.h @@ -18,6 +18,7 @@ #define PTP_MAX_TIMESTAMPS 128 #define PTP_BUF_TIMESTAMPS 30 +#define PTP_DEFAULT_MAX_VCLOCKS 20 struct timestamp_event_queue { struct ptp_extts_event buf[PTP_MAX_TIMESTAMPS]; @@ -46,6 +47,10 @@ struct ptp_clock { const struct attribute_group *pin_attr_groups[2]; struct kthread_worker *kworker; struct kthread_delayed_work aux_work; + unsigned int max_vclocks; + unsigned int n_vclocks; + struct mutex n_vclocks_mux; /* protect concurrent n_vclocks access */ + bool is_virtual_clock; }; #define info_to_vclock(d) container_of((d), struct ptp_vclock, info) @@ -74,6 +79,22 @@ static inline int queue_cnt(struct timestamp_event_queue *q) return cnt < 0 ? PTP_MAX_TIMESTAMPS + cnt : cnt; } +/* Check if ptp virtual clock is in use */ +static inline bool ptp_vclock_in_use(struct ptp_clock *ptp) +{ + bool in_use = false; + + if (mutex_lock_interruptible(&ptp->n_vclocks_mux)) + return true; + + if (!ptp->is_virtual_clock && ptp->n_vclocks) + in_use = true; + + mutex_unlock(&ptp->n_vclocks_mux); + + return in_use; +} + /* * see ptp_chardev.c */ diff --git a/drivers/ptp/ptp_sysfs.c b/drivers/ptp/ptp_sysfs.c index be076a91e20e..0b05041783a5 100644 --- a/drivers/ptp/ptp_sysfs.c +++ b/drivers/ptp/ptp_sysfs.c @@ -3,6 +3,7 @@ * PTP 1588 clock support - sysfs interface. * * Copyright (C) 2010 OMICRON electronics GmbH + * Copyright 2021 NXP */ #include #include @@ -148,6 +149,137 @@ out: } static DEVICE_ATTR(pps_enable, 0220, NULL, pps_enable_store); +static int unregister_vclock(struct device *dev, void *data) +{ + struct ptp_clock *ptp = dev_get_drvdata(dev); + struct ptp_clock_info *info = ptp->info; + struct ptp_vclock *vclock; + u8 *num = data; + + vclock = info_to_vclock(info); + dev_info(dev->parent, "delete virtual clock ptp%d\n", + vclock->clock->index); + + ptp_vclock_unregister(vclock); + (*num)--; + + /* For break. Not error. */ + if (*num == 0) + return -EINVAL; + + return 0; +} + +static ssize_t n_vclocks_show(struct device *dev, + struct device_attribute *attr, char *page) +{ + struct ptp_clock *ptp = dev_get_drvdata(dev); + ssize_t size; + + if (mutex_lock_interruptible(&ptp->n_vclocks_mux)) + return -ERESTARTSYS; + + size = snprintf(page, PAGE_SIZE - 1, "%d\n", ptp->n_vclocks); + + mutex_unlock(&ptp->n_vclocks_mux); + + return size; +} + +static ssize_t n_vclocks_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ptp_clock *ptp = dev_get_drvdata(dev); + struct ptp_vclock *vclock; + int err = -EINVAL; + u32 num, i; + + if (kstrtou32(buf, 0, &num)) + return err; + + if (mutex_lock_interruptible(&ptp->n_vclocks_mux)) + return -ERESTARTSYS; + + if (num > ptp->max_vclocks) { + dev_err(dev, "max value is %d\n", ptp->max_vclocks); + goto out; + } + + /* Need to create more vclocks */ + if (num > ptp->n_vclocks) { + for (i = 0; i < num - ptp->n_vclocks; i++) { + vclock = ptp_vclock_register(ptp); + if (!vclock) + goto out; + + dev_info(dev, "new virtual clock ptp%d\n", + vclock->clock->index); + } + } + + /* Need to delete vclocks */ + if (num < ptp->n_vclocks) { + i = ptp->n_vclocks - num; + device_for_each_child_reverse(dev, &i, + unregister_vclock); + } + + if (num == 0) + dev_info(dev, "only physical clock in use now\n"); + else + dev_info(dev, "guarantee physical clock free running\n"); + + ptp->n_vclocks = num; + mutex_unlock(&ptp->n_vclocks_mux); + + return count; +out: + mutex_unlock(&ptp->n_vclocks_mux); + return err; +} +static DEVICE_ATTR_RW(n_vclocks); + +static ssize_t max_vclocks_show(struct device *dev, + struct device_attribute *attr, char *page) +{ + struct ptp_clock *ptp = dev_get_drvdata(dev); + ssize_t size; + + size = snprintf(page, PAGE_SIZE - 1, "%d\n", ptp->max_vclocks); + + return size; +} + +static ssize_t max_vclocks_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ptp_clock *ptp = dev_get_drvdata(dev); + u32 max; + + if (kstrtou32(buf, 0, &max) || max == 0) + return -EINVAL; + + if (max == ptp->max_vclocks) + return count; + + if (mutex_lock_interruptible(&ptp->n_vclocks_mux)) + return -ERESTARTSYS; + + if (max < ptp->n_vclocks) { + mutex_unlock(&ptp->n_vclocks_mux); + return -EINVAL; + } + + ptp->max_vclocks = max; + + mutex_unlock(&ptp->n_vclocks_mux); + + return count; +} +static DEVICE_ATTR_RW(max_vclocks); + static struct attribute *ptp_attrs[] = { &dev_attr_clock_name.attr, @@ -162,6 +294,8 @@ static struct attribute *ptp_attrs[] = { &dev_attr_fifo.attr, &dev_attr_period.attr, &dev_attr_pps_enable.attr, + &dev_attr_n_vclocks.attr, + &dev_attr_max_vclocks.attr, NULL }; @@ -183,6 +317,10 @@ static umode_t ptp_is_attribute_visible(struct kobject *kobj, } else if (attr == &dev_attr_pps_enable.attr) { if (!info->pps) mode = 0; + } else if (attr == &dev_attr_n_vclocks.attr || + attr == &dev_attr_max_vclocks.attr) { + if (ptp->is_virtual_clock) + mode = 0; } return mode; -- cgit v1.2.3-58-ga151 From 44c494c8e30e35713c7d11ca3c5ab332cbfabacf Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 30 Jun 2021 16:11:54 +0800 Subject: ptp: track available ptp vclocks information Track available ptp vclocks information. Record index values of available ptp vclocks during registering and unregistering. This is preparation for supporting ptp vclocks info query through ethtool. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- drivers/ptp/ptp_clock.c | 15 ++++++++++++++- drivers/ptp/ptp_private.h | 1 + drivers/ptp/ptp_sysfs.c | 28 +++++++++++++++++++++++++--- 3 files changed, 40 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index 7334f478dde7..9205a9362a9d 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -196,6 +196,7 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, { struct ptp_clock *ptp; int err = 0, index, major = MAJOR(ptp_devt); + size_t size; if (info->n_alarm > PTP_MAX_ALARMS) return ERR_PTR(-EINVAL); @@ -238,9 +239,17 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, strcmp(parent->class->name, "ptp") == 0) ptp->is_virtual_clock = true; - if (!ptp->is_virtual_clock) + if (!ptp->is_virtual_clock) { ptp->max_vclocks = PTP_DEFAULT_MAX_VCLOCKS; + size = sizeof(int) * ptp->max_vclocks; + ptp->vclock_index = kzalloc(size, GFP_KERNEL); + if (!ptp->vclock_index) { + err = -ENOMEM; + goto no_mem_for_vclocks; + } + } + err = ptp_populate_pin_groups(ptp); if (err) goto no_pin_groups; @@ -285,6 +294,8 @@ no_clock: no_pps: ptp_cleanup_pin_groups(ptp); no_pin_groups: + kfree(ptp->vclock_index); +no_mem_for_vclocks: if (ptp->kworker) kthread_destroy_worker(ptp->kworker); kworker_err: @@ -309,6 +320,8 @@ int ptp_clock_unregister(struct ptp_clock *ptp) ptp->defunct = 1; wake_up_interruptible(&ptp->tsev_wq); + kfree(ptp->vclock_index); + if (ptp->kworker) { kthread_cancel_delayed_work_sync(&ptp->aux_work); kthread_destroy_worker(ptp->kworker); diff --git a/drivers/ptp/ptp_private.h b/drivers/ptp/ptp_private.h index 87cb55953b69..f75fadd9b244 100644 --- a/drivers/ptp/ptp_private.h +++ b/drivers/ptp/ptp_private.h @@ -49,6 +49,7 @@ struct ptp_clock { struct kthread_delayed_work aux_work; unsigned int max_vclocks; unsigned int n_vclocks; + int *vclock_index; struct mutex n_vclocks_mux; /* protect concurrent n_vclocks access */ bool is_virtual_clock; }; diff --git a/drivers/ptp/ptp_sysfs.c b/drivers/ptp/ptp_sysfs.c index 0b05041783a5..6a36590ca77a 100644 --- a/drivers/ptp/ptp_sysfs.c +++ b/drivers/ptp/ptp_sysfs.c @@ -213,6 +213,9 @@ static ssize_t n_vclocks_store(struct device *dev, if (!vclock) goto out; + *(ptp->vclock_index + ptp->n_vclocks + i) = + vclock->clock->index; + dev_info(dev, "new virtual clock ptp%d\n", vclock->clock->index); } @@ -223,6 +226,9 @@ static ssize_t n_vclocks_store(struct device *dev, i = ptp->n_vclocks - num; device_for_each_child_reverse(dev, &i, unregister_vclock); + + for (i = 1; i <= ptp->n_vclocks - num; i++) + *(ptp->vclock_index + ptp->n_vclocks - i) = -1; } if (num == 0) @@ -256,6 +262,9 @@ static ssize_t max_vclocks_store(struct device *dev, const char *buf, size_t count) { struct ptp_clock *ptp = dev_get_drvdata(dev); + unsigned int *vclock_index; + int err = -EINVAL; + size_t size; u32 max; if (kstrtou32(buf, 0, &max) || max == 0) @@ -267,16 +276,29 @@ static ssize_t max_vclocks_store(struct device *dev, if (mutex_lock_interruptible(&ptp->n_vclocks_mux)) return -ERESTARTSYS; - if (max < ptp->n_vclocks) { - mutex_unlock(&ptp->n_vclocks_mux); - return -EINVAL; + if (max < ptp->n_vclocks) + goto out; + + size = sizeof(int) * max; + vclock_index = kzalloc(size, GFP_KERNEL); + if (!vclock_index) { + err = -ENOMEM; + goto out; } + size = sizeof(int) * ptp->n_vclocks; + memcpy(vclock_index, ptp->vclock_index, size); + + kfree(ptp->vclock_index); + ptp->vclock_index = vclock_index; ptp->max_vclocks = max; mutex_unlock(&ptp->n_vclocks_mux); return count; +out: + mutex_unlock(&ptp->n_vclocks_mux); + return err; } static DEVICE_ATTR_RW(max_vclocks); -- cgit v1.2.3-58-ga151 From acb288e8047b7569fbc9af6fa6e9405315345103 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 30 Jun 2021 16:11:55 +0800 Subject: ptp: add kernel API ptp_get_vclocks_index() Add kernel API ptp_get_vclocks_index() to get all ptp vclocks index on pclock. This is preparation for supporting ptp vclocks info query through ethtool. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- drivers/ptp/ptp_clock.c | 3 ++- drivers/ptp/ptp_private.h | 2 ++ drivers/ptp/ptp_vclock.c | 35 +++++++++++++++++++++++++++++++++++ include/linux/ptp_clock_kernel.h | 14 ++++++++++++++ 4 files changed, 53 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index 9205a9362a9d..f012fa581cf4 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -24,10 +24,11 @@ #define PTP_PPS_EVENT PPS_CAPTUREASSERT #define PTP_PPS_MODE (PTP_PPS_DEFAULTS | PPS_CANWAIT | PPS_TSFMT_TSPEC) +struct class *ptp_class; + /* private globals */ static dev_t ptp_devt; -static struct class *ptp_class; static DEFINE_IDA(ptp_clocks_map); diff --git a/drivers/ptp/ptp_private.h b/drivers/ptp/ptp_private.h index f75fadd9b244..dba6be477067 100644 --- a/drivers/ptp/ptp_private.h +++ b/drivers/ptp/ptp_private.h @@ -96,6 +96,8 @@ static inline bool ptp_vclock_in_use(struct ptp_clock *ptp) return in_use; } +extern struct class *ptp_class; + /* * see ptp_chardev.c */ diff --git a/drivers/ptp/ptp_vclock.c b/drivers/ptp/ptp_vclock.c index fc9205cc504d..cefab29a0592 100644 --- a/drivers/ptp/ptp_vclock.c +++ b/drivers/ptp/ptp_vclock.c @@ -148,3 +148,38 @@ void ptp_vclock_unregister(struct ptp_vclock *vclock) ptp_clock_unregister(vclock->clock); kfree(vclock); } + +int ptp_get_vclocks_index(int pclock_index, int **vclock_index) +{ + char name[PTP_CLOCK_NAME_LEN] = ""; + struct ptp_clock *ptp; + struct device *dev; + int num = 0; + + if (pclock_index < 0) + return num; + + snprintf(name, PTP_CLOCK_NAME_LEN, "ptp%d", pclock_index); + dev = class_find_device_by_name(ptp_class, name); + if (!dev) + return num; + + ptp = dev_get_drvdata(dev); + + if (mutex_lock_interruptible(&ptp->n_vclocks_mux)) { + put_device(dev); + return num; + } + + *vclock_index = kzalloc(sizeof(int) * ptp->n_vclocks, GFP_KERNEL); + if (!(*vclock_index)) + goto out; + + memcpy(*vclock_index, ptp->vclock_index, sizeof(int) * ptp->n_vclocks); + num = ptp->n_vclocks; +out: + mutex_unlock(&ptp->n_vclocks_mux); + put_device(dev); + return num; +} +EXPORT_SYMBOL(ptp_get_vclocks_index); diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h index b6fb771ee524..300a984fec87 100644 --- a/include/linux/ptp_clock_kernel.h +++ b/include/linux/ptp_clock_kernel.h @@ -306,6 +306,18 @@ int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay); */ void ptp_cancel_worker_sync(struct ptp_clock *ptp); +/** + * ptp_get_vclocks_index() - get all vclocks index on pclock, and + * caller is responsible to free memory + * of vclock_index + * + * @pclock_index: phc index of ptp pclock. + * @vclock_index: pointer to pointer of vclock index. + * + * return number of vclocks. + */ +int ptp_get_vclocks_index(int pclock_index, int **vclock_index); + #else static inline struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, struct device *parent) @@ -325,6 +337,8 @@ static inline int ptp_schedule_worker(struct ptp_clock *ptp, { return -EOPNOTSUPP; } static inline void ptp_cancel_worker_sync(struct ptp_clock *ptp) { } +static inline int ptp_get_vclocks_index(int pclock_index, int **vclock_index) +{ return 0; } #endif -- cgit v1.2.3-58-ga151 From 895487a3a10fb3a177e20dcde875515d46ccd4df Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 30 Jun 2021 16:11:57 +0800 Subject: ptp: add kernel API ptp_convert_timestamp() Add kernel API ptp_convert_timestamp() to convert raw hardware timestamp to a specified ptp vclock time. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- drivers/ptp/ptp_vclock.c | 34 ++++++++++++++++++++++++++++++++++ include/linux/ptp_clock_kernel.h | 13 +++++++++++++ 2 files changed, 47 insertions(+) (limited to 'drivers') diff --git a/drivers/ptp/ptp_vclock.c b/drivers/ptp/ptp_vclock.c index cefab29a0592..e0f87c57749a 100644 --- a/drivers/ptp/ptp_vclock.c +++ b/drivers/ptp/ptp_vclock.c @@ -183,3 +183,37 @@ out: return num; } EXPORT_SYMBOL(ptp_get_vclocks_index); + +void ptp_convert_timestamp(struct skb_shared_hwtstamps *hwtstamps, + int vclock_index) +{ + char name[PTP_CLOCK_NAME_LEN] = ""; + struct ptp_vclock *vclock; + struct ptp_clock *ptp; + unsigned long flags; + struct device *dev; + u64 ns; + + snprintf(name, PTP_CLOCK_NAME_LEN, "ptp%d", vclock_index); + dev = class_find_device_by_name(ptp_class, name); + if (!dev) + return; + + ptp = dev_get_drvdata(dev); + if (!ptp->is_virtual_clock) { + put_device(dev); + return; + } + + vclock = info_to_vclock(ptp->info); + + ns = ktime_to_ns(hwtstamps->hwtstamp); + + spin_lock_irqsave(&vclock->lock, flags); + ns = timecounter_cyc2time(&vclock->tc, ns); + spin_unlock_irqrestore(&vclock->lock, flags); + + put_device(dev); + hwtstamps->hwtstamp = ns_to_ktime(ns); +} +EXPORT_SYMBOL(ptp_convert_timestamp); diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h index 300a984fec87..71fac9237725 100644 --- a/include/linux/ptp_clock_kernel.h +++ b/include/linux/ptp_clock_kernel.h @@ -12,6 +12,7 @@ #include #include #include +#include #define PTP_CLOCK_NAME_LEN 32 /** @@ -318,6 +319,15 @@ void ptp_cancel_worker_sync(struct ptp_clock *ptp); */ int ptp_get_vclocks_index(int pclock_index, int **vclock_index); +/** + * ptp_convert_timestamp() - convert timestamp to a ptp vclock time + * + * @hwtstamps: skb_shared_hwtstamps structure pointer + * @vclock_index: phc index of ptp vclock. + */ +void ptp_convert_timestamp(struct skb_shared_hwtstamps *hwtstamps, + int vclock_index); + #else static inline struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, struct device *parent) @@ -339,6 +349,9 @@ static inline void ptp_cancel_worker_sync(struct ptp_clock *ptp) { } static inline int ptp_get_vclocks_index(int pclock_index, int **vclock_index) { return 0; } +static inline void ptp_convert_timestamp(struct skb_shared_hwtstamps *hwtstamps, + int vclock_index) +{ } #endif -- cgit v1.2.3-58-ga151 From 4f408e1fa6e10b6da72691233369172bac7d9e9b Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Wed, 30 Jun 2021 14:36:17 -0400 Subject: ibmvnic: retry reset if there are no other resets Normally, if a reset fails due to failover or other communication error there is another reset (eg: FAILOVER) in the queue and we would process that reset. But if we are unable to communicate with PHYP or VIOS after H_FREE_CRQ, there would be no other resets in the queue and the adapter would be in an undefined state even though it was in the OPEN state earlier. While starting the reset we set the carrier to off state so we won't even get the timeout resets. If the last queued reset fails, retry it as a hard reset (after the usual 60 second settling time). Signed-off-by: Sukadev Bhattiprolu Reviewed-by: Dany Madden Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 374a75d4faea..ed77191d19f4 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2420,9 +2420,10 @@ out: static void __ibmvnic_reset(struct work_struct *work) { - struct ibmvnic_rwi *rwi; struct ibmvnic_adapter *adapter; bool saved_state = false; + struct ibmvnic_rwi *tmprwi; + struct ibmvnic_rwi *rwi; unsigned long flags; u32 reset_state; int rc = 0; @@ -2489,7 +2490,7 @@ static void __ibmvnic_reset(struct work_struct *work) } else { rc = do_reset(adapter, rwi, reset_state); } - kfree(rwi); + tmprwi = rwi; adapter->last_reset_time = jiffies; if (rc) @@ -2497,8 +2498,23 @@ static void __ibmvnic_reset(struct work_struct *work) rwi = get_next_rwi(adapter); + /* + * If there is another reset queued, free the previous rwi + * and process the new reset even if previous reset failed + * (the previous reset could have failed because of a fail + * over for instance, so process the fail over). + * + * If there are no resets queued and the previous reset failed, + * the adapter would be in an undefined state. So retry the + * previous reset as a hard reset. + */ + if (rwi) + kfree(tmprwi); + else if (rc) + rwi = tmprwi; + if (rwi && (rwi->reset_reason == VNIC_RESET_FAILOVER || - rwi->reset_reason == VNIC_RESET_MOBILITY)) + rwi->reset_reason == VNIC_RESET_MOBILITY || rc)) adapter->force_reset_recovery = true; } -- cgit v1.2.3-58-ga151 From ca75bcf0a83b6cc7f53a593d98ec7121c4839b43 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 1 Jul 2021 10:15:09 +0200 Subject: net: remove the caif_hsi driver The caif_hsi driver relies on a cfhsi_get_ops symbol using symbol_get, but this symbol is not provided anywhere in the kernel tree. Remove this driver given that it is dead code. Signed-off-by: Christoph Hellwig Reviewed-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/caif/Kconfig | 9 - drivers/net/caif/Makefile | 3 - drivers/net/caif/caif_hsi.c | 1454 ------------------------------------------- include/net/caif/caif_hsi.h | 200 ------ 4 files changed, 1666 deletions(-) delete mode 100644 drivers/net/caif/caif_hsi.c delete mode 100644 include/net/caif/caif_hsi.h (limited to 'drivers') diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index a77124bc1f4b..709660cb38f8 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -20,15 +20,6 @@ config CAIF_TTY identified as N_CAIF. When this ldisc is opened from user space it will redirect the TTY's traffic into the CAIF stack. -config CAIF_HSI - tristate "CAIF HSI transport driver" - depends on CAIF - default n - help - The CAIF low level driver for CAIF over HSI. - Be aware that if you enable this then you also need to - enable a low-level HSI driver. - config CAIF_VIRTIO tristate "CAIF virtio transport driver" depends on CAIF && HAS_DMA diff --git a/drivers/net/caif/Makefile b/drivers/net/caif/Makefile index b1918c8c126c..97f664f8016c 100644 --- a/drivers/net/caif/Makefile +++ b/drivers/net/caif/Makefile @@ -4,8 +4,5 @@ ccflags-$(CONFIG_CAIF_DEBUG) := -DDEBUG # Serial interface obj-$(CONFIG_CAIF_TTY) += caif_serial.o -# HSI interface -obj-$(CONFIG_CAIF_HSI) += caif_hsi.o - # Virtio interface obj-$(CONFIG_CAIF_VIRTIO) += caif_virtio.o diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c deleted file mode 100644 index 3d63b15bbaa1..000000000000 --- a/drivers/net/caif/caif_hsi.c +++ /dev/null @@ -1,1454 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) ST-Ericsson AB 2010 - * Author: Daniel Martensson - * Dmitry.Tarnyagin / dmitry.tarnyagin@lockless.no - */ - -#define pr_fmt(fmt) KBUILD_MODNAME fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Daniel Martensson"); -MODULE_DESCRIPTION("CAIF HSI driver"); - -/* Returns the number of padding bytes for alignment. */ -#define PAD_POW2(x, pow) ((((x)&((pow)-1)) == 0) ? 0 :\ - (((pow)-((x)&((pow)-1))))) - -static const struct cfhsi_config hsi_default_config = { - - /* Inactivity timeout on HSI, ms */ - .inactivity_timeout = HZ, - - /* Aggregation timeout (ms) of zero means no aggregation is done*/ - .aggregation_timeout = 1, - - /* - * HSI link layer flow-control thresholds. - * Threshold values for the HSI packet queue. Flow-control will be - * asserted when the number of packets exceeds q_high_mark. It will - * not be de-asserted before the number of packets drops below - * q_low_mark. - * Warning: A high threshold value might increase throughput but it - * will at the same time prevent channel prioritization and increase - * the risk of flooding the modem. The high threshold should be above - * the low. - */ - .q_high_mark = 100, - .q_low_mark = 50, - - /* - * HSI padding options. - * Warning: must be a base of 2 (& operation used) and can not be zero ! - */ - .head_align = 4, - .tail_align = 4, -}; - -#define ON 1 -#define OFF 0 - -static LIST_HEAD(cfhsi_list); - -static void cfhsi_inactivity_tout(struct timer_list *t) -{ - struct cfhsi *cfhsi = from_timer(cfhsi, t, inactivity_timer); - - netdev_dbg(cfhsi->ndev, "%s.\n", - __func__); - - /* Schedule power down work queue. */ - if (!test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - queue_work(cfhsi->wq, &cfhsi->wake_down_work); -} - -static void cfhsi_update_aggregation_stats(struct cfhsi *cfhsi, - const struct sk_buff *skb, - int direction) -{ - struct caif_payload_info *info; - int hpad, tpad, len; - - info = (struct caif_payload_info *)&skb->cb; - hpad = 1 + PAD_POW2((info->hdr_len + 1), cfhsi->cfg.head_align); - tpad = PAD_POW2((skb->len + hpad), cfhsi->cfg.tail_align); - len = skb->len + hpad + tpad; - - if (direction > 0) - cfhsi->aggregation_len += len; - else if (direction < 0) - cfhsi->aggregation_len -= len; -} - -static bool cfhsi_can_send_aggregate(struct cfhsi *cfhsi) -{ - int i; - - if (cfhsi->cfg.aggregation_timeout == 0) - return true; - - for (i = 0; i < CFHSI_PRIO_BEBK; ++i) { - if (cfhsi->qhead[i].qlen) - return true; - } - - /* TODO: Use aggregation_len instead */ - if (cfhsi->qhead[CFHSI_PRIO_BEBK].qlen >= CFHSI_MAX_PKTS) - return true; - - return false; -} - -static struct sk_buff *cfhsi_dequeue(struct cfhsi *cfhsi) -{ - struct sk_buff *skb; - int i; - - for (i = 0; i < CFHSI_PRIO_LAST; ++i) { - skb = skb_dequeue(&cfhsi->qhead[i]); - if (skb) - break; - } - - return skb; -} - -static int cfhsi_tx_queue_len(struct cfhsi *cfhsi) -{ - int i, len = 0; - for (i = 0; i < CFHSI_PRIO_LAST; ++i) - len += skb_queue_len(&cfhsi->qhead[i]); - return len; -} - -static void cfhsi_abort_tx(struct cfhsi *cfhsi) -{ - struct sk_buff *skb; - - for (;;) { - spin_lock_bh(&cfhsi->lock); - skb = cfhsi_dequeue(cfhsi); - if (!skb) - break; - - cfhsi->ndev->stats.tx_errors++; - cfhsi->ndev->stats.tx_dropped++; - cfhsi_update_aggregation_stats(cfhsi, skb, -1); - spin_unlock_bh(&cfhsi->lock); - kfree_skb(skb); - } - cfhsi->tx_state = CFHSI_TX_STATE_IDLE; - if (!test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - mod_timer(&cfhsi->inactivity_timer, - jiffies + cfhsi->cfg.inactivity_timeout); - spin_unlock_bh(&cfhsi->lock); -} - -static int cfhsi_flush_fifo(struct cfhsi *cfhsi) -{ - char buffer[32]; /* Any reasonable value */ - size_t fifo_occupancy; - int ret; - - netdev_dbg(cfhsi->ndev, "%s.\n", - __func__); - - do { - ret = cfhsi->ops->cfhsi_fifo_occupancy(cfhsi->ops, - &fifo_occupancy); - if (ret) { - netdev_warn(cfhsi->ndev, - "%s: can't get FIFO occupancy: %d.\n", - __func__, ret); - break; - } else if (!fifo_occupancy) - /* No more data, exitting normally */ - break; - - fifo_occupancy = min(sizeof(buffer), fifo_occupancy); - set_bit(CFHSI_FLUSH_FIFO, &cfhsi->bits); - ret = cfhsi->ops->cfhsi_rx(buffer, fifo_occupancy, - cfhsi->ops); - if (ret) { - clear_bit(CFHSI_FLUSH_FIFO, &cfhsi->bits); - netdev_warn(cfhsi->ndev, - "%s: can't read data: %d.\n", - __func__, ret); - break; - } - - ret = 5 * HZ; - ret = wait_event_interruptible_timeout(cfhsi->flush_fifo_wait, - !test_bit(CFHSI_FLUSH_FIFO, &cfhsi->bits), ret); - - if (ret < 0) { - netdev_warn(cfhsi->ndev, - "%s: can't wait for flush complete: %d.\n", - __func__, ret); - break; - } else if (!ret) { - ret = -ETIMEDOUT; - netdev_warn(cfhsi->ndev, - "%s: timeout waiting for flush complete.\n", - __func__); - break; - } - } while (1); - - return ret; -} - -static int cfhsi_tx_frm(struct cfhsi_desc *desc, struct cfhsi *cfhsi) -{ - int nfrms = 0; - int pld_len = 0; - struct sk_buff *skb; - u8 *pfrm = desc->emb_frm + CFHSI_MAX_EMB_FRM_SZ; - - skb = cfhsi_dequeue(cfhsi); - if (!skb) - return 0; - - /* Clear offset. */ - desc->offset = 0; - - /* Check if we can embed a CAIF frame. */ - if (skb->len < CFHSI_MAX_EMB_FRM_SZ) { - struct caif_payload_info *info; - int hpad; - int tpad; - - /* Calculate needed head alignment and tail alignment. */ - info = (struct caif_payload_info *)&skb->cb; - - hpad = 1 + PAD_POW2((info->hdr_len + 1), cfhsi->cfg.head_align); - tpad = PAD_POW2((skb->len + hpad), cfhsi->cfg.tail_align); - - /* Check if frame still fits with added alignment. */ - if ((skb->len + hpad + tpad) <= CFHSI_MAX_EMB_FRM_SZ) { - u8 *pemb = desc->emb_frm; - desc->offset = CFHSI_DESC_SHORT_SZ; - *pemb = (u8)(hpad - 1); - pemb += hpad; - - /* Update network statistics. */ - spin_lock_bh(&cfhsi->lock); - cfhsi->ndev->stats.tx_packets++; - cfhsi->ndev->stats.tx_bytes += skb->len; - cfhsi_update_aggregation_stats(cfhsi, skb, -1); - spin_unlock_bh(&cfhsi->lock); - - /* Copy in embedded CAIF frame. */ - skb_copy_bits(skb, 0, pemb, skb->len); - - /* Consume the SKB */ - consume_skb(skb); - skb = NULL; - } - } - - /* Create payload CAIF frames. */ - while (nfrms < CFHSI_MAX_PKTS) { - struct caif_payload_info *info; - int hpad; - int tpad; - - if (!skb) - skb = cfhsi_dequeue(cfhsi); - - if (!skb) - break; - - /* Calculate needed head alignment and tail alignment. */ - info = (struct caif_payload_info *)&skb->cb; - - hpad = 1 + PAD_POW2((info->hdr_len + 1), cfhsi->cfg.head_align); - tpad = PAD_POW2((skb->len + hpad), cfhsi->cfg.tail_align); - - /* Fill in CAIF frame length in descriptor. */ - desc->cffrm_len[nfrms] = hpad + skb->len + tpad; - - /* Fill head padding information. */ - *pfrm = (u8)(hpad - 1); - pfrm += hpad; - - /* Update network statistics. */ - spin_lock_bh(&cfhsi->lock); - cfhsi->ndev->stats.tx_packets++; - cfhsi->ndev->stats.tx_bytes += skb->len; - cfhsi_update_aggregation_stats(cfhsi, skb, -1); - spin_unlock_bh(&cfhsi->lock); - - /* Copy in CAIF frame. */ - skb_copy_bits(skb, 0, pfrm, skb->len); - - /* Update payload length. */ - pld_len += desc->cffrm_len[nfrms]; - - /* Update frame pointer. */ - pfrm += skb->len + tpad; - - /* Consume the SKB */ - consume_skb(skb); - skb = NULL; - - /* Update number of frames. */ - nfrms++; - } - - /* Unused length fields should be zero-filled (according to SPEC). */ - while (nfrms < CFHSI_MAX_PKTS) { - desc->cffrm_len[nfrms] = 0x0000; - nfrms++; - } - - /* Check if we can piggy-back another descriptor. */ - if (cfhsi_can_send_aggregate(cfhsi)) - desc->header |= CFHSI_PIGGY_DESC; - else - desc->header &= ~CFHSI_PIGGY_DESC; - - return CFHSI_DESC_SZ + pld_len; -} - -static void cfhsi_start_tx(struct cfhsi *cfhsi) -{ - struct cfhsi_desc *desc = (struct cfhsi_desc *)cfhsi->tx_buf; - int len, res; - - netdev_dbg(cfhsi->ndev, "%s.\n", __func__); - - if (test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - return; - - do { - /* Create HSI frame. */ - len = cfhsi_tx_frm(desc, cfhsi); - if (!len) { - spin_lock_bh(&cfhsi->lock); - if (unlikely(cfhsi_tx_queue_len(cfhsi))) { - spin_unlock_bh(&cfhsi->lock); - res = -EAGAIN; - continue; - } - cfhsi->tx_state = CFHSI_TX_STATE_IDLE; - /* Start inactivity timer. */ - mod_timer(&cfhsi->inactivity_timer, - jiffies + cfhsi->cfg.inactivity_timeout); - spin_unlock_bh(&cfhsi->lock); - break; - } - - /* Set up new transfer. */ - res = cfhsi->ops->cfhsi_tx(cfhsi->tx_buf, len, cfhsi->ops); - if (WARN_ON(res < 0)) - netdev_err(cfhsi->ndev, "%s: TX error %d.\n", - __func__, res); - } while (res < 0); -} - -static void cfhsi_tx_done(struct cfhsi *cfhsi) -{ - netdev_dbg(cfhsi->ndev, "%s.\n", __func__); - - if (test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - return; - - /* - * Send flow on if flow off has been previously signalled - * and number of packets is below low water mark. - */ - spin_lock_bh(&cfhsi->lock); - if (cfhsi->flow_off_sent && - cfhsi_tx_queue_len(cfhsi) <= cfhsi->cfg.q_low_mark && - cfhsi->cfdev.flowctrl) { - - cfhsi->flow_off_sent = 0; - cfhsi->cfdev.flowctrl(cfhsi->ndev, ON); - } - - if (cfhsi_can_send_aggregate(cfhsi)) { - spin_unlock_bh(&cfhsi->lock); - cfhsi_start_tx(cfhsi); - } else { - mod_timer(&cfhsi->aggregation_timer, - jiffies + cfhsi->cfg.aggregation_timeout); - spin_unlock_bh(&cfhsi->lock); - } - - return; -} - -static void cfhsi_tx_done_cb(struct cfhsi_cb_ops *cb_ops) -{ - struct cfhsi *cfhsi; - - cfhsi = container_of(cb_ops, struct cfhsi, cb_ops); - netdev_dbg(cfhsi->ndev, "%s.\n", - __func__); - - if (test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - return; - cfhsi_tx_done(cfhsi); -} - -static int cfhsi_rx_desc(struct cfhsi_desc *desc, struct cfhsi *cfhsi) -{ - int xfer_sz = 0; - int nfrms = 0; - u16 *plen = NULL; - u8 *pfrm = NULL; - - if ((desc->header & ~CFHSI_PIGGY_DESC) || - (desc->offset > CFHSI_MAX_EMB_FRM_SZ)) { - netdev_err(cfhsi->ndev, "%s: Invalid descriptor.\n", - __func__); - return -EPROTO; - } - - /* Check for embedded CAIF frame. */ - if (desc->offset) { - struct sk_buff *skb; - int len = 0; - pfrm = ((u8 *)desc) + desc->offset; - - /* Remove offset padding. */ - pfrm += *pfrm + 1; - - /* Read length of CAIF frame (little endian). */ - len = *pfrm; - len |= ((*(pfrm+1)) << 8) & 0xFF00; - len += 2; /* Add FCS fields. */ - - /* Sanity check length of CAIF frame. */ - if (unlikely(len > CFHSI_MAX_CAIF_FRAME_SZ)) { - netdev_err(cfhsi->ndev, "%s: Invalid length.\n", - __func__); - return -EPROTO; - } - - /* Allocate SKB (OK even in IRQ context). */ - skb = alloc_skb(len + 1, GFP_ATOMIC); - if (!skb) { - netdev_err(cfhsi->ndev, "%s: Out of memory !\n", - __func__); - return -ENOMEM; - } - caif_assert(skb != NULL); - - skb_put_data(skb, pfrm, len); - - skb->protocol = htons(ETH_P_CAIF); - skb_reset_mac_header(skb); - skb->dev = cfhsi->ndev; - - netif_rx_any_context(skb); - - /* Update network statistics. */ - cfhsi->ndev->stats.rx_packets++; - cfhsi->ndev->stats.rx_bytes += len; - } - - /* Calculate transfer length. */ - plen = desc->cffrm_len; - while (nfrms < CFHSI_MAX_PKTS && *plen) { - xfer_sz += *plen; - plen++; - nfrms++; - } - - /* Check for piggy-backed descriptor. */ - if (desc->header & CFHSI_PIGGY_DESC) - xfer_sz += CFHSI_DESC_SZ; - - if ((xfer_sz % 4) || (xfer_sz > (CFHSI_BUF_SZ_RX - CFHSI_DESC_SZ))) { - netdev_err(cfhsi->ndev, - "%s: Invalid payload len: %d, ignored.\n", - __func__, xfer_sz); - return -EPROTO; - } - return xfer_sz; -} - -static int cfhsi_rx_desc_len(struct cfhsi_desc *desc) -{ - int xfer_sz = 0; - int nfrms = 0; - u16 *plen; - - if ((desc->header & ~CFHSI_PIGGY_DESC) || - (desc->offset > CFHSI_MAX_EMB_FRM_SZ)) { - - pr_err("Invalid descriptor. %x %x\n", desc->header, - desc->offset); - return -EPROTO; - } - - /* Calculate transfer length. */ - plen = desc->cffrm_len; - while (nfrms < CFHSI_MAX_PKTS && *plen) { - xfer_sz += *plen; - plen++; - nfrms++; - } - - if (xfer_sz % 4) { - pr_err("Invalid payload len: %d, ignored.\n", xfer_sz); - return -EPROTO; - } - return xfer_sz; -} - -static int cfhsi_rx_pld(struct cfhsi_desc *desc, struct cfhsi *cfhsi) -{ - int rx_sz = 0; - int nfrms = 0; - u16 *plen = NULL; - u8 *pfrm = NULL; - - /* Sanity check header and offset. */ - if (WARN_ON((desc->header & ~CFHSI_PIGGY_DESC) || - (desc->offset > CFHSI_MAX_EMB_FRM_SZ))) { - netdev_err(cfhsi->ndev, "%s: Invalid descriptor.\n", - __func__); - return -EPROTO; - } - - /* Set frame pointer to start of payload. */ - pfrm = desc->emb_frm + CFHSI_MAX_EMB_FRM_SZ; - plen = desc->cffrm_len; - - /* Skip already processed frames. */ - while (nfrms < cfhsi->rx_state.nfrms) { - pfrm += *plen; - rx_sz += *plen; - plen++; - nfrms++; - } - - /* Parse payload. */ - while (nfrms < CFHSI_MAX_PKTS && *plen) { - struct sk_buff *skb; - u8 *pcffrm = NULL; - int len; - - /* CAIF frame starts after head padding. */ - pcffrm = pfrm + *pfrm + 1; - - /* Read length of CAIF frame (little endian). */ - len = *pcffrm; - len |= ((*(pcffrm + 1)) << 8) & 0xFF00; - len += 2; /* Add FCS fields. */ - - /* Sanity check length of CAIF frames. */ - if (unlikely(len > CFHSI_MAX_CAIF_FRAME_SZ)) { - netdev_err(cfhsi->ndev, "%s: Invalid length.\n", - __func__); - return -EPROTO; - } - - /* Allocate SKB (OK even in IRQ context). */ - skb = alloc_skb(len + 1, GFP_ATOMIC); - if (!skb) { - netdev_err(cfhsi->ndev, "%s: Out of memory !\n", - __func__); - cfhsi->rx_state.nfrms = nfrms; - return -ENOMEM; - } - caif_assert(skb != NULL); - - skb_put_data(skb, pcffrm, len); - - skb->protocol = htons(ETH_P_CAIF); - skb_reset_mac_header(skb); - skb->dev = cfhsi->ndev; - - netif_rx_any_context(skb); - - /* Update network statistics. */ - cfhsi->ndev->stats.rx_packets++; - cfhsi->ndev->stats.rx_bytes += len; - - pfrm += *plen; - rx_sz += *plen; - plen++; - nfrms++; - } - - return rx_sz; -} - -static void cfhsi_rx_done(struct cfhsi *cfhsi) -{ - int res; - int desc_pld_len = 0, rx_len, rx_state; - struct cfhsi_desc *desc = NULL; - u8 *rx_ptr, *rx_buf; - struct cfhsi_desc *piggy_desc = NULL; - - desc = (struct cfhsi_desc *)cfhsi->rx_buf; - - netdev_dbg(cfhsi->ndev, "%s\n", __func__); - - if (test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - return; - - /* Update inactivity timer if pending. */ - spin_lock_bh(&cfhsi->lock); - mod_timer_pending(&cfhsi->inactivity_timer, - jiffies + cfhsi->cfg.inactivity_timeout); - spin_unlock_bh(&cfhsi->lock); - - if (cfhsi->rx_state.state == CFHSI_RX_STATE_DESC) { - desc_pld_len = cfhsi_rx_desc_len(desc); - - if (desc_pld_len < 0) - goto out_of_sync; - - rx_buf = cfhsi->rx_buf; - rx_len = desc_pld_len; - if (desc_pld_len > 0 && (desc->header & CFHSI_PIGGY_DESC)) - rx_len += CFHSI_DESC_SZ; - if (desc_pld_len == 0) - rx_buf = cfhsi->rx_flip_buf; - } else { - rx_buf = cfhsi->rx_flip_buf; - - rx_len = CFHSI_DESC_SZ; - if (cfhsi->rx_state.pld_len > 0 && - (desc->header & CFHSI_PIGGY_DESC)) { - - piggy_desc = (struct cfhsi_desc *) - (desc->emb_frm + CFHSI_MAX_EMB_FRM_SZ + - cfhsi->rx_state.pld_len); - - cfhsi->rx_state.piggy_desc = true; - - /* Extract payload len from piggy-backed descriptor. */ - desc_pld_len = cfhsi_rx_desc_len(piggy_desc); - if (desc_pld_len < 0) - goto out_of_sync; - - if (desc_pld_len > 0) { - rx_len = desc_pld_len; - if (piggy_desc->header & CFHSI_PIGGY_DESC) - rx_len += CFHSI_DESC_SZ; - } - - /* - * Copy needed information from the piggy-backed - * descriptor to the descriptor in the start. - */ - memcpy(rx_buf, (u8 *)piggy_desc, - CFHSI_DESC_SHORT_SZ); - } - } - - if (desc_pld_len) { - rx_state = CFHSI_RX_STATE_PAYLOAD; - rx_ptr = rx_buf + CFHSI_DESC_SZ; - } else { - rx_state = CFHSI_RX_STATE_DESC; - rx_ptr = rx_buf; - rx_len = CFHSI_DESC_SZ; - } - - /* Initiate next read */ - if (test_bit(CFHSI_AWAKE, &cfhsi->bits)) { - /* Set up new transfer. */ - netdev_dbg(cfhsi->ndev, "%s: Start RX.\n", - __func__); - - res = cfhsi->ops->cfhsi_rx(rx_ptr, rx_len, - cfhsi->ops); - if (WARN_ON(res < 0)) { - netdev_err(cfhsi->ndev, "%s: RX error %d.\n", - __func__, res); - cfhsi->ndev->stats.rx_errors++; - cfhsi->ndev->stats.rx_dropped++; - } - } - - if (cfhsi->rx_state.state == CFHSI_RX_STATE_DESC) { - /* Extract payload from descriptor */ - if (cfhsi_rx_desc(desc, cfhsi) < 0) - goto out_of_sync; - } else { - /* Extract payload */ - if (cfhsi_rx_pld(desc, cfhsi) < 0) - goto out_of_sync; - if (piggy_desc) { - /* Extract any payload in piggyback descriptor. */ - if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0) - goto out_of_sync; - /* Mark no embedded frame after extracting it */ - piggy_desc->offset = 0; - } - } - - /* Update state info */ - memset(&cfhsi->rx_state, 0, sizeof(cfhsi->rx_state)); - cfhsi->rx_state.state = rx_state; - cfhsi->rx_ptr = rx_ptr; - cfhsi->rx_len = rx_len; - cfhsi->rx_state.pld_len = desc_pld_len; - cfhsi->rx_state.piggy_desc = desc->header & CFHSI_PIGGY_DESC; - - if (rx_buf != cfhsi->rx_buf) - swap(cfhsi->rx_buf, cfhsi->rx_flip_buf); - return; - -out_of_sync: - netdev_err(cfhsi->ndev, "%s: Out of sync.\n", __func__); - print_hex_dump_bytes("--> ", DUMP_PREFIX_NONE, - cfhsi->rx_buf, CFHSI_DESC_SZ); - schedule_work(&cfhsi->out_of_sync_work); -} - -static void cfhsi_rx_slowpath(struct timer_list *t) -{ - struct cfhsi *cfhsi = from_timer(cfhsi, t, rx_slowpath_timer); - - netdev_dbg(cfhsi->ndev, "%s.\n", - __func__); - - cfhsi_rx_done(cfhsi); -} - -static void cfhsi_rx_done_cb(struct cfhsi_cb_ops *cb_ops) -{ - struct cfhsi *cfhsi; - - cfhsi = container_of(cb_ops, struct cfhsi, cb_ops); - netdev_dbg(cfhsi->ndev, "%s.\n", - __func__); - - if (test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - return; - - if (test_and_clear_bit(CFHSI_FLUSH_FIFO, &cfhsi->bits)) - wake_up_interruptible(&cfhsi->flush_fifo_wait); - else - cfhsi_rx_done(cfhsi); -} - -static void cfhsi_wake_up(struct work_struct *work) -{ - struct cfhsi *cfhsi = NULL; - int res; - int len; - long ret; - - cfhsi = container_of(work, struct cfhsi, wake_up_work); - - if (test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - return; - - if (unlikely(test_bit(CFHSI_AWAKE, &cfhsi->bits))) { - /* It happenes when wakeup is requested by - * both ends at the same time. */ - clear_bit(CFHSI_WAKE_UP, &cfhsi->bits); - clear_bit(CFHSI_WAKE_UP_ACK, &cfhsi->bits); - return; - } - - /* Activate wake line. */ - cfhsi->ops->cfhsi_wake_up(cfhsi->ops); - - netdev_dbg(cfhsi->ndev, "%s: Start waiting.\n", - __func__); - - /* Wait for acknowledge. */ - ret = CFHSI_WAKE_TOUT; - ret = wait_event_interruptible_timeout(cfhsi->wake_up_wait, - test_and_clear_bit(CFHSI_WAKE_UP_ACK, - &cfhsi->bits), ret); - if (unlikely(ret < 0)) { - /* Interrupted by signal. */ - netdev_err(cfhsi->ndev, "%s: Signalled: %ld.\n", - __func__, ret); - - clear_bit(CFHSI_WAKE_UP, &cfhsi->bits); - cfhsi->ops->cfhsi_wake_down(cfhsi->ops); - return; - } else if (!ret) { - bool ca_wake = false; - size_t fifo_occupancy = 0; - - /* Wakeup timeout */ - netdev_dbg(cfhsi->ndev, "%s: Timeout.\n", - __func__); - - /* Check FIFO to check if modem has sent something. */ - WARN_ON(cfhsi->ops->cfhsi_fifo_occupancy(cfhsi->ops, - &fifo_occupancy)); - - netdev_dbg(cfhsi->ndev, "%s: Bytes in FIFO: %u.\n", - __func__, (unsigned) fifo_occupancy); - - /* Check if we misssed the interrupt. */ - WARN_ON(cfhsi->ops->cfhsi_get_peer_wake(cfhsi->ops, - &ca_wake)); - - if (ca_wake) { - netdev_err(cfhsi->ndev, "%s: CA Wake missed !.\n", - __func__); - - /* Clear the CFHSI_WAKE_UP_ACK bit to prevent race. */ - clear_bit(CFHSI_WAKE_UP_ACK, &cfhsi->bits); - - /* Continue execution. */ - goto wake_ack; - } - - clear_bit(CFHSI_WAKE_UP, &cfhsi->bits); - cfhsi->ops->cfhsi_wake_down(cfhsi->ops); - return; - } -wake_ack: - netdev_dbg(cfhsi->ndev, "%s: Woken.\n", - __func__); - - /* Clear power up bit. */ - set_bit(CFHSI_AWAKE, &cfhsi->bits); - clear_bit(CFHSI_WAKE_UP, &cfhsi->bits); - - /* Resume read operation. */ - netdev_dbg(cfhsi->ndev, "%s: Start RX.\n", __func__); - res = cfhsi->ops->cfhsi_rx(cfhsi->rx_ptr, cfhsi->rx_len, cfhsi->ops); - - if (WARN_ON(res < 0)) - netdev_err(cfhsi->ndev, "%s: RX err %d.\n", __func__, res); - - /* Clear power up acknowledment. */ - clear_bit(CFHSI_WAKE_UP_ACK, &cfhsi->bits); - - spin_lock_bh(&cfhsi->lock); - - /* Resume transmit if queues are not empty. */ - if (!cfhsi_tx_queue_len(cfhsi)) { - netdev_dbg(cfhsi->ndev, "%s: Peer wake, start timer.\n", - __func__); - /* Start inactivity timer. */ - mod_timer(&cfhsi->inactivity_timer, - jiffies + cfhsi->cfg.inactivity_timeout); - spin_unlock_bh(&cfhsi->lock); - return; - } - - netdev_dbg(cfhsi->ndev, "%s: Host wake.\n", - __func__); - - spin_unlock_bh(&cfhsi->lock); - - /* Create HSI frame. */ - len = cfhsi_tx_frm((struct cfhsi_desc *)cfhsi->tx_buf, cfhsi); - - if (likely(len > 0)) { - /* Set up new transfer. */ - res = cfhsi->ops->cfhsi_tx(cfhsi->tx_buf, len, cfhsi->ops); - if (WARN_ON(res < 0)) { - netdev_err(cfhsi->ndev, "%s: TX error %d.\n", - __func__, res); - cfhsi_abort_tx(cfhsi); - } - } else { - netdev_err(cfhsi->ndev, - "%s: Failed to create HSI frame: %d.\n", - __func__, len); - } -} - -static void cfhsi_wake_down(struct work_struct *work) -{ - long ret; - struct cfhsi *cfhsi = NULL; - size_t fifo_occupancy = 0; - int retry = CFHSI_WAKE_TOUT; - - cfhsi = container_of(work, struct cfhsi, wake_down_work); - netdev_dbg(cfhsi->ndev, "%s.\n", __func__); - - if (test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - return; - - /* Deactivate wake line. */ - cfhsi->ops->cfhsi_wake_down(cfhsi->ops); - - /* Wait for acknowledge. */ - ret = CFHSI_WAKE_TOUT; - ret = wait_event_interruptible_timeout(cfhsi->wake_down_wait, - test_and_clear_bit(CFHSI_WAKE_DOWN_ACK, - &cfhsi->bits), ret); - if (ret < 0) { - /* Interrupted by signal. */ - netdev_err(cfhsi->ndev, "%s: Signalled: %ld.\n", - __func__, ret); - return; - } else if (!ret) { - bool ca_wake = true; - - /* Timeout */ - netdev_err(cfhsi->ndev, "%s: Timeout.\n", __func__); - - /* Check if we misssed the interrupt. */ - WARN_ON(cfhsi->ops->cfhsi_get_peer_wake(cfhsi->ops, - &ca_wake)); - if (!ca_wake) - netdev_err(cfhsi->ndev, "%s: CA Wake missed !.\n", - __func__); - } - - /* Check FIFO occupancy. */ - while (retry) { - WARN_ON(cfhsi->ops->cfhsi_fifo_occupancy(cfhsi->ops, - &fifo_occupancy)); - - if (!fifo_occupancy) - break; - - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - retry--; - } - - if (!retry) - netdev_err(cfhsi->ndev, "%s: FIFO Timeout.\n", __func__); - - /* Clear AWAKE condition. */ - clear_bit(CFHSI_AWAKE, &cfhsi->bits); - - /* Cancel pending RX requests. */ - cfhsi->ops->cfhsi_rx_cancel(cfhsi->ops); -} - -static void cfhsi_out_of_sync(struct work_struct *work) -{ - struct cfhsi *cfhsi = NULL; - - cfhsi = container_of(work, struct cfhsi, out_of_sync_work); - - rtnl_lock(); - dev_close(cfhsi->ndev); - rtnl_unlock(); -} - -static void cfhsi_wake_up_cb(struct cfhsi_cb_ops *cb_ops) -{ - struct cfhsi *cfhsi = NULL; - - cfhsi = container_of(cb_ops, struct cfhsi, cb_ops); - netdev_dbg(cfhsi->ndev, "%s.\n", - __func__); - - set_bit(CFHSI_WAKE_UP_ACK, &cfhsi->bits); - wake_up_interruptible(&cfhsi->wake_up_wait); - - if (test_bit(CFHSI_SHUTDOWN, &cfhsi->bits)) - return; - - /* Schedule wake up work queue if the peer initiates. */ - if (!test_and_set_bit(CFHSI_WAKE_UP, &cfhsi->bits)) - queue_work(cfhsi->wq, &cfhsi->wake_up_work); -} - -static void cfhsi_wake_down_cb(struct cfhsi_cb_ops *cb_ops) -{ - struct cfhsi *cfhsi = NULL; - - cfhsi = container_of(cb_ops, struct cfhsi, cb_ops); - netdev_dbg(cfhsi->ndev, "%s.\n", - __func__); - - /* Initiating low power is only permitted by the host (us). */ - set_bit(CFHSI_WAKE_DOWN_ACK, &cfhsi->bits); - wake_up_interruptible(&cfhsi->wake_down_wait); -} - -static void cfhsi_aggregation_tout(struct timer_list *t) -{ - struct cfhsi *cfhsi = from_timer(cfhsi, t, aggregation_timer); - - netdev_dbg(cfhsi->ndev, "%s.\n", - __func__); - - cfhsi_start_tx(cfhsi); -} - -static netdev_tx_t cfhsi_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct cfhsi *cfhsi = NULL; - int start_xfer = 0; - int timer_active; - int prio; - - if (!dev) - return -EINVAL; - - cfhsi = netdev_priv(dev); - - switch (skb->priority) { - case TC_PRIO_BESTEFFORT: - case TC_PRIO_FILLER: - case TC_PRIO_BULK: - prio = CFHSI_PRIO_BEBK; - break; - case TC_PRIO_INTERACTIVE_BULK: - prio = CFHSI_PRIO_VI; - break; - case TC_PRIO_INTERACTIVE: - prio = CFHSI_PRIO_VO; - break; - case TC_PRIO_CONTROL: - default: - prio = CFHSI_PRIO_CTL; - break; - } - - spin_lock_bh(&cfhsi->lock); - - /* Update aggregation statistics */ - cfhsi_update_aggregation_stats(cfhsi, skb, 1); - - /* Queue the SKB */ - skb_queue_tail(&cfhsi->qhead[prio], skb); - - /* Sanity check; xmit should not be called after unregister_netdev */ - if (WARN_ON(test_bit(CFHSI_SHUTDOWN, &cfhsi->bits))) { - spin_unlock_bh(&cfhsi->lock); - cfhsi_abort_tx(cfhsi); - return -EINVAL; - } - - /* Send flow off if number of packets is above high water mark. */ - if (!cfhsi->flow_off_sent && - cfhsi_tx_queue_len(cfhsi) > cfhsi->cfg.q_high_mark && - cfhsi->cfdev.flowctrl) { - cfhsi->flow_off_sent = 1; - cfhsi->cfdev.flowctrl(cfhsi->ndev, OFF); - } - - if (cfhsi->tx_state == CFHSI_TX_STATE_IDLE) { - cfhsi->tx_state = CFHSI_TX_STATE_XFER; - start_xfer = 1; - } - - if (!start_xfer) { - /* Send aggregate if it is possible */ - bool aggregate_ready = - cfhsi_can_send_aggregate(cfhsi) && - del_timer(&cfhsi->aggregation_timer) > 0; - spin_unlock_bh(&cfhsi->lock); - if (aggregate_ready) - cfhsi_start_tx(cfhsi); - return NETDEV_TX_OK; - } - - /* Delete inactivity timer if started. */ - timer_active = del_timer_sync(&cfhsi->inactivity_timer); - - spin_unlock_bh(&cfhsi->lock); - - if (timer_active) { - struct cfhsi_desc *desc = (struct cfhsi_desc *)cfhsi->tx_buf; - int len; - int res; - - /* Create HSI frame. */ - len = cfhsi_tx_frm(desc, cfhsi); - WARN_ON(!len); - - /* Set up new transfer. */ - res = cfhsi->ops->cfhsi_tx(cfhsi->tx_buf, len, cfhsi->ops); - if (WARN_ON(res < 0)) { - netdev_err(cfhsi->ndev, "%s: TX error %d.\n", - __func__, res); - cfhsi_abort_tx(cfhsi); - } - } else { - /* Schedule wake up work queue if the we initiate. */ - if (!test_and_set_bit(CFHSI_WAKE_UP, &cfhsi->bits)) - queue_work(cfhsi->wq, &cfhsi->wake_up_work); - } - - return NETDEV_TX_OK; -} - -static const struct net_device_ops cfhsi_netdevops; - -static void cfhsi_setup(struct net_device *dev) -{ - int i; - struct cfhsi *cfhsi = netdev_priv(dev); - dev->features = 0; - dev->type = ARPHRD_CAIF; - dev->flags = IFF_POINTOPOINT | IFF_NOARP; - dev->mtu = CFHSI_MAX_CAIF_FRAME_SZ; - dev->priv_flags |= IFF_NO_QUEUE; - dev->needs_free_netdev = true; - dev->netdev_ops = &cfhsi_netdevops; - for (i = 0; i < CFHSI_PRIO_LAST; ++i) - skb_queue_head_init(&cfhsi->qhead[i]); - cfhsi->cfdev.link_select = CAIF_LINK_HIGH_BANDW; - cfhsi->cfdev.use_frag = false; - cfhsi->cfdev.use_stx = false; - cfhsi->cfdev.use_fcs = false; - cfhsi->ndev = dev; - cfhsi->cfg = hsi_default_config; -} - -static int cfhsi_open(struct net_device *ndev) -{ - struct cfhsi *cfhsi = netdev_priv(ndev); - int res; - - clear_bit(CFHSI_SHUTDOWN, &cfhsi->bits); - - /* Initialize state vaiables. */ - cfhsi->tx_state = CFHSI_TX_STATE_IDLE; - cfhsi->rx_state.state = CFHSI_RX_STATE_DESC; - - /* Set flow info */ - cfhsi->flow_off_sent = 0; - - /* - * Allocate a TX buffer with the size of a HSI packet descriptors - * and the necessary room for CAIF payload frames. - */ - cfhsi->tx_buf = kzalloc(CFHSI_BUF_SZ_TX, GFP_KERNEL); - if (!cfhsi->tx_buf) { - res = -ENODEV; - goto err_alloc_tx; - } - - /* - * Allocate a RX buffer with the size of two HSI packet descriptors and - * the necessary room for CAIF payload frames. - */ - cfhsi->rx_buf = kzalloc(CFHSI_BUF_SZ_RX, GFP_KERNEL); - if (!cfhsi->rx_buf) { - res = -ENODEV; - goto err_alloc_rx; - } - - cfhsi->rx_flip_buf = kzalloc(CFHSI_BUF_SZ_RX, GFP_KERNEL); - if (!cfhsi->rx_flip_buf) { - res = -ENODEV; - goto err_alloc_rx_flip; - } - - /* Initialize aggregation timeout */ - cfhsi->cfg.aggregation_timeout = hsi_default_config.aggregation_timeout; - - /* Initialize recieve vaiables. */ - cfhsi->rx_ptr = cfhsi->rx_buf; - cfhsi->rx_len = CFHSI_DESC_SZ; - - /* Initialize spin locks. */ - spin_lock_init(&cfhsi->lock); - - /* Set up the driver. */ - cfhsi->cb_ops.tx_done_cb = cfhsi_tx_done_cb; - cfhsi->cb_ops.rx_done_cb = cfhsi_rx_done_cb; - cfhsi->cb_ops.wake_up_cb = cfhsi_wake_up_cb; - cfhsi->cb_ops.wake_down_cb = cfhsi_wake_down_cb; - - /* Initialize the work queues. */ - INIT_WORK(&cfhsi->wake_up_work, cfhsi_wake_up); - INIT_WORK(&cfhsi->wake_down_work, cfhsi_wake_down); - INIT_WORK(&cfhsi->out_of_sync_work, cfhsi_out_of_sync); - - /* Clear all bit fields. */ - clear_bit(CFHSI_WAKE_UP_ACK, &cfhsi->bits); - clear_bit(CFHSI_WAKE_DOWN_ACK, &cfhsi->bits); - clear_bit(CFHSI_WAKE_UP, &cfhsi->bits); - clear_bit(CFHSI_AWAKE, &cfhsi->bits); - - /* Create work thread. */ - cfhsi->wq = alloc_ordered_workqueue(cfhsi->ndev->name, WQ_MEM_RECLAIM); - if (!cfhsi->wq) { - netdev_err(cfhsi->ndev, "%s: Failed to create work queue.\n", - __func__); - res = -ENODEV; - goto err_create_wq; - } - - /* Initialize wait queues. */ - init_waitqueue_head(&cfhsi->wake_up_wait); - init_waitqueue_head(&cfhsi->wake_down_wait); - init_waitqueue_head(&cfhsi->flush_fifo_wait); - - /* Setup the inactivity timer. */ - timer_setup(&cfhsi->inactivity_timer, cfhsi_inactivity_tout, 0); - /* Setup the slowpath RX timer. */ - timer_setup(&cfhsi->rx_slowpath_timer, cfhsi_rx_slowpath, 0); - /* Setup the aggregation timer. */ - timer_setup(&cfhsi->aggregation_timer, cfhsi_aggregation_tout, 0); - - /* Activate HSI interface. */ - res = cfhsi->ops->cfhsi_up(cfhsi->ops); - if (res) { - netdev_err(cfhsi->ndev, - "%s: can't activate HSI interface: %d.\n", - __func__, res); - goto err_activate; - } - - /* Flush FIFO */ - res = cfhsi_flush_fifo(cfhsi); - if (res) { - netdev_err(cfhsi->ndev, "%s: Can't flush FIFO: %d.\n", - __func__, res); - goto err_net_reg; - } - return res; - - err_net_reg: - cfhsi->ops->cfhsi_down(cfhsi->ops); - err_activate: - destroy_workqueue(cfhsi->wq); - err_create_wq: - kfree(cfhsi->rx_flip_buf); - err_alloc_rx_flip: - kfree(cfhsi->rx_buf); - err_alloc_rx: - kfree(cfhsi->tx_buf); - err_alloc_tx: - return res; -} - -static int cfhsi_close(struct net_device *ndev) -{ - struct cfhsi *cfhsi = netdev_priv(ndev); - u8 *tx_buf, *rx_buf, *flip_buf; - - /* going to shutdown driver */ - set_bit(CFHSI_SHUTDOWN, &cfhsi->bits); - - /* Delete timers if pending */ - del_timer_sync(&cfhsi->inactivity_timer); - del_timer_sync(&cfhsi->rx_slowpath_timer); - del_timer_sync(&cfhsi->aggregation_timer); - - /* Cancel pending RX request (if any) */ - cfhsi->ops->cfhsi_rx_cancel(cfhsi->ops); - - /* Destroy workqueue */ - destroy_workqueue(cfhsi->wq); - - /* Store bufferes: will be freed later. */ - tx_buf = cfhsi->tx_buf; - rx_buf = cfhsi->rx_buf; - flip_buf = cfhsi->rx_flip_buf; - /* Flush transmit queues. */ - cfhsi_abort_tx(cfhsi); - - /* Deactivate interface */ - cfhsi->ops->cfhsi_down(cfhsi->ops); - - /* Free buffers. */ - kfree(tx_buf); - kfree(rx_buf); - kfree(flip_buf); - return 0; -} - -static void cfhsi_uninit(struct net_device *dev) -{ - struct cfhsi *cfhsi = netdev_priv(dev); - ASSERT_RTNL(); - symbol_put(cfhsi_get_device); - list_del(&cfhsi->list); -} - -static const struct net_device_ops cfhsi_netdevops = { - .ndo_uninit = cfhsi_uninit, - .ndo_open = cfhsi_open, - .ndo_stop = cfhsi_close, - .ndo_start_xmit = cfhsi_xmit -}; - -static void cfhsi_netlink_parms(struct nlattr *data[], struct cfhsi *cfhsi) -{ - int i; - - if (!data) { - pr_debug("no params data found\n"); - return; - } - - i = __IFLA_CAIF_HSI_INACTIVITY_TOUT; - /* - * Inactivity timeout in millisecs. Lowest possible value is 1, - * and highest possible is NEXT_TIMER_MAX_DELTA. - */ - if (data[i]) { - u32 inactivity_timeout = nla_get_u32(data[i]); - /* Pre-calculate inactivity timeout. */ - cfhsi->cfg.inactivity_timeout = inactivity_timeout * HZ / 1000; - if (cfhsi->cfg.inactivity_timeout == 0) - cfhsi->cfg.inactivity_timeout = 1; - else if (cfhsi->cfg.inactivity_timeout > NEXT_TIMER_MAX_DELTA) - cfhsi->cfg.inactivity_timeout = NEXT_TIMER_MAX_DELTA; - } - - i = __IFLA_CAIF_HSI_AGGREGATION_TOUT; - if (data[i]) - cfhsi->cfg.aggregation_timeout = nla_get_u32(data[i]); - - i = __IFLA_CAIF_HSI_HEAD_ALIGN; - if (data[i]) - cfhsi->cfg.head_align = nla_get_u32(data[i]); - - i = __IFLA_CAIF_HSI_TAIL_ALIGN; - if (data[i]) - cfhsi->cfg.tail_align = nla_get_u32(data[i]); - - i = __IFLA_CAIF_HSI_QHIGH_WATERMARK; - if (data[i]) - cfhsi->cfg.q_high_mark = nla_get_u32(data[i]); - - i = __IFLA_CAIF_HSI_QLOW_WATERMARK; - if (data[i]) - cfhsi->cfg.q_low_mark = nla_get_u32(data[i]); -} - -static int caif_hsi_changelink(struct net_device *dev, struct nlattr *tb[], - struct nlattr *data[], - struct netlink_ext_ack *extack) -{ - cfhsi_netlink_parms(data, netdev_priv(dev)); - netdev_state_change(dev); - return 0; -} - -static const struct nla_policy caif_hsi_policy[__IFLA_CAIF_HSI_MAX + 1] = { - [__IFLA_CAIF_HSI_INACTIVITY_TOUT] = { .type = NLA_U32, .len = 4 }, - [__IFLA_CAIF_HSI_AGGREGATION_TOUT] = { .type = NLA_U32, .len = 4 }, - [__IFLA_CAIF_HSI_HEAD_ALIGN] = { .type = NLA_U32, .len = 4 }, - [__IFLA_CAIF_HSI_TAIL_ALIGN] = { .type = NLA_U32, .len = 4 }, - [__IFLA_CAIF_HSI_QHIGH_WATERMARK] = { .type = NLA_U32, .len = 4 }, - [__IFLA_CAIF_HSI_QLOW_WATERMARK] = { .type = NLA_U32, .len = 4 }, -}; - -static size_t caif_hsi_get_size(const struct net_device *dev) -{ - int i; - size_t s = 0; - for (i = __IFLA_CAIF_HSI_UNSPEC + 1; i < __IFLA_CAIF_HSI_MAX; i++) - s += nla_total_size(caif_hsi_policy[i].len); - return s; -} - -static int caif_hsi_fill_info(struct sk_buff *skb, const struct net_device *dev) -{ - struct cfhsi *cfhsi = netdev_priv(dev); - - if (nla_put_u32(skb, __IFLA_CAIF_HSI_INACTIVITY_TOUT, - cfhsi->cfg.inactivity_timeout) || - nla_put_u32(skb, __IFLA_CAIF_HSI_AGGREGATION_TOUT, - cfhsi->cfg.aggregation_timeout) || - nla_put_u32(skb, __IFLA_CAIF_HSI_HEAD_ALIGN, - cfhsi->cfg.head_align) || - nla_put_u32(skb, __IFLA_CAIF_HSI_TAIL_ALIGN, - cfhsi->cfg.tail_align) || - nla_put_u32(skb, __IFLA_CAIF_HSI_QHIGH_WATERMARK, - cfhsi->cfg.q_high_mark) || - nla_put_u32(skb, __IFLA_CAIF_HSI_QLOW_WATERMARK, - cfhsi->cfg.q_low_mark)) - return -EMSGSIZE; - - return 0; -} - -static int caif_hsi_newlink(struct net *src_net, struct net_device *dev, - struct nlattr *tb[], struct nlattr *data[], - struct netlink_ext_ack *extack) -{ - struct cfhsi *cfhsi = NULL; - struct cfhsi_ops *(*get_ops)(void); - - ASSERT_RTNL(); - - cfhsi = netdev_priv(dev); - cfhsi_netlink_parms(data, cfhsi); - - get_ops = symbol_get(cfhsi_get_ops); - if (!get_ops) { - pr_err("%s: failed to get the cfhsi_ops\n", __func__); - return -ENODEV; - } - - /* Assign the HSI device. */ - cfhsi->ops = (*get_ops)(); - if (!cfhsi->ops) { - pr_err("%s: failed to get the cfhsi_ops\n", __func__); - goto err; - } - - /* Assign the driver to this HSI device. */ - cfhsi->ops->cb_ops = &cfhsi->cb_ops; - if (register_netdevice(dev)) { - pr_warn("%s: caif_hsi device registration failed\n", __func__); - goto err; - } - /* Add CAIF HSI device to list. */ - list_add_tail(&cfhsi->list, &cfhsi_list); - - return 0; -err: - symbol_put(cfhsi_get_ops); - return -ENODEV; -} - -static struct rtnl_link_ops caif_hsi_link_ops __read_mostly = { - .kind = "cfhsi", - .priv_size = sizeof(struct cfhsi), - .setup = cfhsi_setup, - .maxtype = __IFLA_CAIF_HSI_MAX, - .policy = caif_hsi_policy, - .newlink = caif_hsi_newlink, - .changelink = caif_hsi_changelink, - .get_size = caif_hsi_get_size, - .fill_info = caif_hsi_fill_info, -}; - -static void __exit cfhsi_exit_module(void) -{ - struct list_head *list_node; - struct list_head *n; - struct cfhsi *cfhsi; - - rtnl_link_unregister(&caif_hsi_link_ops); - - rtnl_lock(); - list_for_each_safe(list_node, n, &cfhsi_list) { - cfhsi = list_entry(list_node, struct cfhsi, list); - unregister_netdevice(cfhsi->ndev); - } - rtnl_unlock(); -} - -static int __init cfhsi_init_module(void) -{ - return rtnl_link_register(&caif_hsi_link_ops); -} - -module_init(cfhsi_init_module); -module_exit(cfhsi_exit_module); diff --git a/include/net/caif/caif_hsi.h b/include/net/caif/caif_hsi.h deleted file mode 100644 index 552cf68d28d2..000000000000 --- a/include/net/caif/caif_hsi.h +++ /dev/null @@ -1,200 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson AB 2010 - * Author: Daniel Martensson / daniel.martensson@stericsson.com - * Dmitry.Tarnyagin / dmitry.tarnyagin@stericsson.com - */ - -#ifndef CAIF_HSI_H_ -#define CAIF_HSI_H_ - -#include -#include -#include - -/* - * Maximum number of CAIF frames that can reside in the same HSI frame. - */ -#define CFHSI_MAX_PKTS 15 - -/* - * Maximum number of bytes used for the frame that can be embedded in the - * HSI descriptor. - */ -#define CFHSI_MAX_EMB_FRM_SZ 96 - -/* - * Decides if HSI buffers should be prefilled with 0xFF pattern for easier - * debugging. Both TX and RX buffers will be filled before the transfer. - */ -#define CFHSI_DBG_PREFILL 0 - -/* Structure describing a HSI packet descriptor. */ -#pragma pack(1) /* Byte alignment. */ -struct cfhsi_desc { - u8 header; - u8 offset; - u16 cffrm_len[CFHSI_MAX_PKTS]; - u8 emb_frm[CFHSI_MAX_EMB_FRM_SZ]; -}; -#pragma pack() /* Default alignment. */ - -/* Size of the complete HSI packet descriptor. */ -#define CFHSI_DESC_SZ (sizeof(struct cfhsi_desc)) - -/* - * Size of the complete HSI packet descriptor excluding the optional embedded - * CAIF frame. - */ -#define CFHSI_DESC_SHORT_SZ (CFHSI_DESC_SZ - CFHSI_MAX_EMB_FRM_SZ) - -/* - * Maximum bytes transferred in one transfer. - */ -#define CFHSI_MAX_CAIF_FRAME_SZ 4096 - -#define CFHSI_MAX_PAYLOAD_SZ (CFHSI_MAX_PKTS * CFHSI_MAX_CAIF_FRAME_SZ) - -/* Size of the complete HSI TX buffer. */ -#define CFHSI_BUF_SZ_TX (CFHSI_DESC_SZ + CFHSI_MAX_PAYLOAD_SZ) - -/* Size of the complete HSI RX buffer. */ -#define CFHSI_BUF_SZ_RX ((2 * CFHSI_DESC_SZ) + CFHSI_MAX_PAYLOAD_SZ) - -/* Bitmasks for the HSI descriptor. */ -#define CFHSI_PIGGY_DESC (0x01 << 7) - -#define CFHSI_TX_STATE_IDLE 0 -#define CFHSI_TX_STATE_XFER 1 - -#define CFHSI_RX_STATE_DESC 0 -#define CFHSI_RX_STATE_PAYLOAD 1 - -/* Bitmasks for power management. */ -#define CFHSI_WAKE_UP 0 -#define CFHSI_WAKE_UP_ACK 1 -#define CFHSI_WAKE_DOWN_ACK 2 -#define CFHSI_AWAKE 3 -#define CFHSI_WAKELOCK_HELD 4 -#define CFHSI_SHUTDOWN 5 -#define CFHSI_FLUSH_FIFO 6 - -#ifndef CFHSI_INACTIVITY_TOUT -#define CFHSI_INACTIVITY_TOUT (1 * HZ) -#endif /* CFHSI_INACTIVITY_TOUT */ - -#ifndef CFHSI_WAKE_TOUT -#define CFHSI_WAKE_TOUT (3 * HZ) -#endif /* CFHSI_WAKE_TOUT */ - -#ifndef CFHSI_MAX_RX_RETRIES -#define CFHSI_MAX_RX_RETRIES (10 * HZ) -#endif - -/* Structure implemented by the CAIF HSI driver. */ -struct cfhsi_cb_ops { - void (*tx_done_cb) (struct cfhsi_cb_ops *drv); - void (*rx_done_cb) (struct cfhsi_cb_ops *drv); - void (*wake_up_cb) (struct cfhsi_cb_ops *drv); - void (*wake_down_cb) (struct cfhsi_cb_ops *drv); -}; - -/* Structure implemented by HSI device. */ -struct cfhsi_ops { - int (*cfhsi_up) (struct cfhsi_ops *dev); - int (*cfhsi_down) (struct cfhsi_ops *dev); - int (*cfhsi_tx) (u8 *ptr, int len, struct cfhsi_ops *dev); - int (*cfhsi_rx) (u8 *ptr, int len, struct cfhsi_ops *dev); - int (*cfhsi_wake_up) (struct cfhsi_ops *dev); - int (*cfhsi_wake_down) (struct cfhsi_ops *dev); - int (*cfhsi_get_peer_wake) (struct cfhsi_ops *dev, bool *status); - int (*cfhsi_fifo_occupancy) (struct cfhsi_ops *dev, size_t *occupancy); - int (*cfhsi_rx_cancel)(struct cfhsi_ops *dev); - struct cfhsi_cb_ops *cb_ops; -}; - -/* Structure holds status of received CAIF frames processing */ -struct cfhsi_rx_state { - int state; - int nfrms; - int pld_len; - int retries; - bool piggy_desc; -}; - -/* Priority mapping */ -enum { - CFHSI_PRIO_CTL = 0, - CFHSI_PRIO_VI, - CFHSI_PRIO_VO, - CFHSI_PRIO_BEBK, - CFHSI_PRIO_LAST, -}; - -struct cfhsi_config { - u32 inactivity_timeout; - u32 aggregation_timeout; - u32 head_align; - u32 tail_align; - u32 q_high_mark; - u32 q_low_mark; -}; - -/* Structure implemented by CAIF HSI drivers. */ -struct cfhsi { - struct caif_dev_common cfdev; - struct net_device *ndev; - struct platform_device *pdev; - struct sk_buff_head qhead[CFHSI_PRIO_LAST]; - struct cfhsi_cb_ops cb_ops; - struct cfhsi_ops *ops; - int tx_state; - struct cfhsi_rx_state rx_state; - struct cfhsi_config cfg; - int rx_len; - u8 *rx_ptr; - u8 *tx_buf; - u8 *rx_buf; - u8 *rx_flip_buf; - spinlock_t lock; - int flow_off_sent; - struct list_head list; - struct work_struct wake_up_work; - struct work_struct wake_down_work; - struct work_struct out_of_sync_work; - struct workqueue_struct *wq; - wait_queue_head_t wake_up_wait; - wait_queue_head_t wake_down_wait; - wait_queue_head_t flush_fifo_wait; - struct timer_list inactivity_timer; - struct timer_list rx_slowpath_timer; - - /* TX aggregation */ - int aggregation_len; - struct timer_list aggregation_timer; - - unsigned long bits; -}; -extern struct platform_driver cfhsi_driver; - -/** - * enum ifla_caif_hsi - CAIF HSI NetlinkRT parameters. - * @IFLA_CAIF_HSI_INACTIVITY_TOUT: Inactivity timeout before - * taking the HSI wakeline down, in milliseconds. - * When using RT Netlink to create, destroy or configure a CAIF HSI interface, - * enum ifla_caif_hsi is used to specify the configuration attributes. - */ -enum ifla_caif_hsi { - __IFLA_CAIF_HSI_UNSPEC, - __IFLA_CAIF_HSI_INACTIVITY_TOUT, - __IFLA_CAIF_HSI_AGGREGATION_TOUT, - __IFLA_CAIF_HSI_HEAD_ALIGN, - __IFLA_CAIF_HSI_TAIL_ALIGN, - __IFLA_CAIF_HSI_QHIGH_WATERMARK, - __IFLA_CAIF_HSI_QLOW_WATERMARK, - __IFLA_CAIF_HSI_MAX -}; - -struct cfhsi_ops *cfhsi_get_ops(void); - -#endif /* CAIF_HSI_H_ */ -- cgit v1.2.3-58-ga151 From 6b28a86d6c0bb02119f386ec2f56efde909e9bcb Mon Sep 17 00:00:00 2001 From: Mohammad Athari Bin Ismail Date: Wed, 30 Jun 2021 17:59:35 +0800 Subject: net: stmmac: Terminate FPE workqueue in suspend Add stmmac_fpe_stop_wq() in stmmac_suspend() to terminate FPE workqueue during suspend. So, in suspend mode, there will be no FPE workqueue available. Without this fix, new additional FPE workqueue will be created in every suspend->resume cycle. Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure") Signed-off-by: Mohammad Athari Bin Ismail Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8d9d6ecf8c63..7b8404a21544 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -7171,6 +7171,7 @@ int stmmac_suspend(struct device *dev) priv->plat->rx_queues_to_use, false); stmmac_fpe_handshake(priv, false); + stmmac_fpe_stop_wq(priv); } priv->speed = SPEED_UNKNOWN; -- cgit v1.2.3-58-ga151 From 2342ae10d1272d411a468a85a67647dd115b344f Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Thu, 1 Jul 2021 22:18:24 +0200 Subject: gve: Fix an error handling path in 'gve_probe()' If the 'register_netdev() call fails, we must release the resources allocated by the previous 'gve_init_priv()' call, as already done in the remove function. Add a new label and the missing 'gve_teardown_priv_resources()' in the error handling path. Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: Christophe JAILLET Reviewed-by: Catherine Sullivan Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 867e87af3432..44262c9f9ec2 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -1565,7 +1565,7 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = register_netdev(dev); if (err) - goto abort_with_wq; + goto abort_with_gve_init; dev_info(&pdev->dev, "GVE version %s\n", gve_version_str); dev_info(&pdev->dev, "GVE queue format %d\n", (int)priv->queue_format); @@ -1573,6 +1573,9 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent) queue_work(priv->gve_wq, &priv->service_task); return 0; +abort_with_gve_init: + gve_teardown_priv_resources(priv); + abort_with_wq: destroy_workqueue(priv->gve_wq); -- cgit v1.2.3-58-ga151 From 6dce38b4b7ffb39539b49feca2b3ce34dbaadf02 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Thu, 1 Jul 2021 22:18:37 +0200 Subject: gve: Propagate error codes to caller If 'gve_probe()' fails, we should propagate the error code, instead of hard coding a -ENXIO value. Make sure that all error handling paths set a correct value for 'err'. Signed-off-by: Christophe JAILLET Reviewed-by: Catherine Sullivan Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 44262c9f9ec2..c03984b26db4 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -1469,7 +1469,7 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = pci_enable_device(pdev); if (err) - return -ENXIO; + return err; err = pci_request_regions(pdev, "gvnic-cfg"); if (err) @@ -1512,6 +1512,7 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev = alloc_etherdev_mqs(sizeof(*priv), max_tx_queues, max_rx_queues); if (!dev) { dev_err(&pdev->dev, "could not allocate netdev\n"); + err = -ENOMEM; goto abort_with_db_bar; } SET_NETDEV_DEV(dev, &pdev->dev); @@ -1593,7 +1594,7 @@ abort_with_pci_region: abort_with_enabled: pci_disable_device(pdev); - return -ENXIO; + return err; } static void gve_remove(struct pci_dev *pdev) -- cgit v1.2.3-58-ga151 From bde3c8ffdd4153a3e9f0b0d51d972b30113b35ac Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Thu, 1 Jul 2021 22:41:19 +0200 Subject: gve: Simplify code and axe the use of a deprecated API The wrappers in include/linux/pci-dma-compat.h should go away. Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent and less verbose 'dma_set_mask_and_coherent()' call. Signed-off-by: Christophe JAILLET Reviewed-by: Catherine Sullivan Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve_main.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index c03984b26db4..099a2bc5ae67 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -1477,19 +1477,12 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (err) { dev_err(&pdev->dev, "Failed to set dma mask: err=%d\n", err); goto abort_with_pci_region; } - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); - if (err) { - dev_err(&pdev->dev, - "Failed to set consistent dma mask: err=%d\n", err); - goto abort_with_pci_region; - } - reg_bar = pci_iomap(pdev, GVE_REGISTER_BAR, 0); if (!reg_bar) { dev_err(&pdev->dev, "Failed to map pci bar!\n"); -- cgit v1.2.3-58-ga151 From 1bfa4d0cb5adf954e0f4870a3ecb7cb19506320c Mon Sep 17 00:00:00 2001 From: Bailey Forrest Date: Thu, 1 Jul 2021 20:13:36 -0700 Subject: gve: DQO: Remove incorrect prefetch The prefetch is incorrectly using the dma address instead of the virtual address. It's supposed to be: prefetch((char *)buf_state->page_info.page_address + buf_state->page_info.page_offset) However, after correcting this mistake, there is no evidence of performance improvement. Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path") Signed-off-by: Bailey Forrest Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve_rx_dqo.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/google/gve/gve_rx_dqo.c b/drivers/net/ethernet/google/gve/gve_rx_dqo.c index 77bb8227f89b..8500621b2cd4 100644 --- a/drivers/net/ethernet/google/gve/gve_rx_dqo.c +++ b/drivers/net/ethernet/google/gve/gve_rx_dqo.c @@ -566,13 +566,6 @@ static int gve_rx_dqo(struct napi_struct *napi, struct gve_rx_ring *rx, return 0; } - /* Prefetch the payload header. */ - prefetch((char *)buf_state->addr + buf_state->page_info.page_offset); -#if L1_CACHE_BYTES < 128 - prefetch((char *)buf_state->addr + buf_state->page_info.page_offset + - L1_CACHE_BYTES); -#endif - if (eop && buf_len <= priv->rx_copybreak) { rx->skb_head = gve_rx_copy(priv->dev, napi, &buf_state->page_info, buf_len, 0); -- cgit v1.2.3-58-ga151 From 7cc93d888df764a13f196e3d4aef38869f7dd217 Mon Sep 17 00:00:00 2001 From: Louis Peens Date: Fri, 2 Jul 2021 11:21:39 +0200 Subject: nfp: flower-ct: remove callback delete deadlock The current location of the callback delete can lead to a race condition where deleting the callback requires a write_lock on the nf_table, but at the same time another thread from netfilter could have taken a read lock on the table before trying to offload. Since the driver is taking a rtnl_lock this can lead into a deadlock situation, where the netfilter offload will wait for the cls_flower rtnl_lock to be released, but this cannot happen since this is waiting for the nf_table read_lock to be released before it can delete the callback. Solve this by completely removing the nf_flow_table_offload_del_cb call, as this will now be cleaned up by act_ct itself when cleaning up the specific nf_table. Fixes: 62268e78145f ("nfp: flower-ct: add nft callback stubs") Signed-off-by: Louis Peens Signed-off-by: Yinjun Zhang Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/conntrack.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/flower/conntrack.c b/drivers/net/ethernet/netronome/nfp/flower/conntrack.c index 273d529d43c2..128020b1573e 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/conntrack.c +++ b/drivers/net/ethernet/netronome/nfp/flower/conntrack.c @@ -1141,20 +1141,7 @@ int nfp_fl_ct_del_flow(struct nfp_fl_ct_map_entry *ct_map_ent) nfp_fl_ct_clean_flow_entry(ct_entry); kfree(ct_map_ent); - /* If this is the last pre_ct_rule it means that it is - * very likely that the nft table will be cleaned up next, - * as this happens on the removal of the last act_ct flow. - * However we cannot deregister the callback on the removal - * of the last nft flow as this runs into a deadlock situation. - * So deregister the callback on removal of the last pre_ct flow - * and remove any remaining nft flow entries. We also cannot - * save this state and delete the callback later since the - * nft table would already have been freed at that time. - */ if (!zt->pre_ct_count) { - nf_flow_table_offload_del_cb(zt->nft, - nfp_fl_ct_handle_nft_flow, - zt); zt->nft = NULL; nfp_fl_ct_clean_nft_entries(zt); } -- cgit v1.2.3-58-ga151 From b22580233d473dbf7bbfa4f6549c09e2c80e9e64 Mon Sep 17 00:00:00 2001 From: Ronak Doshi Date: Thu, 1 Jul 2021 23:44:27 -0700 Subject: vmxnet3: fix cksum offload issues for tunnels with non-default udp ports Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") added support for encapsulation offload. However, the inner offload capability is to be restricted to UDP tunnels with default Vxlan and Geneve ports. This patch fixes the issue for tunnels with non-default ports using features check capability and filtering appropriate features for such tunnels. Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by: Ronak Doshi Acked-by: Guolin Yang Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_ethtool.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c index c0bd9cbc43b1..1b483cf2b1ca 100644 --- a/drivers/net/vmxnet3/vmxnet3_ethtool.c +++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c @@ -1,7 +1,7 @@ /* * Linux driver for VMware's vmxnet3 ethernet NIC. * - * Copyright (C) 2008-2020, VMware, Inc. All Rights Reserved. + * Copyright (C) 2008-2021, VMware, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -26,6 +26,10 @@ #include "vmxnet3_int.h" +#include +#include + +#define VXLAN_UDP_PORT 8472 struct vmxnet3_stat_desc { char desc[ETH_GSTRING_LEN]; @@ -262,6 +266,8 @@ netdev_features_t vmxnet3_features_check(struct sk_buff *skb, if (VMXNET3_VERSION_GE_4(adapter) && skb->encapsulation && skb->ip_summed == CHECKSUM_PARTIAL) { u8 l4_proto = 0; + u16 port; + struct udphdr *udph; switch (vlan_get_protocol(skb)) { case htons(ETH_P_IP): @@ -274,8 +280,20 @@ netdev_features_t vmxnet3_features_check(struct sk_buff *skb, return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); } - if (l4_proto != IPPROTO_UDP) + switch (l4_proto) { + case IPPROTO_UDP: + udph = udp_hdr(skb); + port = be16_to_cpu(udph->dest); + /* Check if offloaded port is supported */ + if (port != GENEVE_UDP_PORT && + port != IANA_VXLAN_UDP_PORT && + port != VXLAN_UDP_PORT) { + return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); + } + break; + default: return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); + } } return features; } -- cgit v1.2.3-58-ga151 From 6ff63a150b5556012589ae59efac1b5eeb7d32c3 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sat, 3 Jul 2021 21:17:27 +0200 Subject: net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment routine even if the fragment contains only the ethernet FCS. Fixes: 039fbc47f9f1 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack") Signed-off-by: Lorenzo Bianconi Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 361bc4fbe20b..76a7777c746d 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2299,19 +2299,19 @@ mvneta_swbm_add_rx_fragment(struct mvneta_port *pp, skb_frag_off_set(frag, pp->rx_offset_correction); skb_frag_size_set(frag, data_len); __skb_frag_set_page(frag, page); - - /* last fragment */ - if (len == *size) { - struct skb_shared_info *sinfo; - - sinfo = xdp_get_shared_info_from_buff(xdp); - sinfo->nr_frags = xdp_sinfo->nr_frags; - memcpy(sinfo->frags, xdp_sinfo->frags, - sinfo->nr_frags * sizeof(skb_frag_t)); - } } else { page_pool_put_full_page(rxq->page_pool, page, true); } + + /* last fragment */ + if (len == *size) { + struct skb_shared_info *sinfo; + + sinfo = xdp_get_shared_info_from_buff(xdp); + sinfo->nr_frags = xdp_sinfo->nr_frags; + memcpy(sinfo->frags, xdp_sinfo->frags, + sinfo->nr_frags * sizeof(skb_frag_t)); + } *size -= len; } -- cgit v1.2.3-58-ga151 From 55eac20617ca84129273ab248f4d7bfe456967de Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Mon, 5 Jul 2021 16:53:06 +0800 Subject: ptp: fix NULL pointer dereference in ptp_clock_register Fix NULL pointer dereference in ptp_clock_register. The argument "parent" of ptp_clock_register may be NULL pointer. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Reported-by: kernel test robot Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- drivers/ptp/ptp_clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index f012fa581cf4..ce6d9fc85607 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -236,7 +236,7 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, } /* PTP virtual clock is being registered under physical clock */ - if (parent->class && parent->class->name && + if (parent && parent->class && parent->class->name && strcmp(parent->class->name, "ptp") == 0) ptp->is_virtual_clock = true; -- cgit v1.2.3-58-ga151 From f6a175cfcc8df578adfdf06b05c82b3b8c8b5cfd Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Mon, 5 Jul 2021 17:46:17 +0800 Subject: ptp: fix format string mismatch in ptp_sysfs.c Fix format string mismatch in ptp_sysfs.c. Use %u for unsigned int. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Reported-by: kernel test robot Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- drivers/ptp/ptp_sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_sysfs.c b/drivers/ptp/ptp_sysfs.c index 6a36590ca77a..b3d96b747292 100644 --- a/drivers/ptp/ptp_sysfs.c +++ b/drivers/ptp/ptp_sysfs.c @@ -179,7 +179,7 @@ static ssize_t n_vclocks_show(struct device *dev, if (mutex_lock_interruptible(&ptp->n_vclocks_mux)) return -ERESTARTSYS; - size = snprintf(page, PAGE_SIZE - 1, "%d\n", ptp->n_vclocks); + size = snprintf(page, PAGE_SIZE - 1, "%u\n", ptp->n_vclocks); mutex_unlock(&ptp->n_vclocks_mux); @@ -252,7 +252,7 @@ static ssize_t max_vclocks_show(struct device *dev, struct ptp_clock *ptp = dev_get_drvdata(dev); ssize_t size; - size = snprintf(page, PAGE_SIZE - 1, "%d\n", ptp->max_vclocks); + size = snprintf(page, PAGE_SIZE - 1, "%u\n", ptp->max_vclocks); return size; } -- cgit v1.2.3-58-ga151 From 81c52c42afd92b741289208c65e5063b9e23ffb4 Mon Sep 17 00:00:00 2001 From: Xiaoliang Yang Date: Mon, 5 Jul 2021 18:26:53 +0800 Subject: net: stmmac: separate the tas basetime calculation function Separate the TAS basetime calculation function so that it can be called by other functions. Signed-off-by: Xiaoliang Yang Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 ++ drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 38 ++++++++++++++++--------- 2 files changed, 28 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index e735134e8487..fcdb1d20389b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -349,6 +349,9 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue); void stmmac_disable_tx_queue(struct stmmac_priv *priv, u32 queue); void stmmac_enable_tx_queue(struct stmmac_priv *priv, u32 queue); int stmmac_xsk_wakeup(struct net_device *dev, u32 queue, u32 flags); +struct timespec64 stmmac_calc_tas_basetime(ktime_t old_base_time, + ktime_t current_time, + u64 cycle_time); #if IS_ENABLED(CONFIG_STMMAC_SELFTESTS) void stmmac_selftest_run(struct net_device *dev, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index 92dab609d4f8..596626c71189 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -711,6 +711,29 @@ static int tc_setup_cls(struct stmmac_priv *priv, return ret; } +struct timespec64 stmmac_calc_tas_basetime(ktime_t old_base_time, + ktime_t current_time, + u64 cycle_time) +{ + struct timespec64 time; + + if (ktime_after(old_base_time, current_time)) { + time = ktime_to_timespec64(old_base_time); + } else { + s64 n; + ktime_t base_time; + + n = div64_s64(ktime_sub_ns(current_time, old_base_time), + cycle_time); + base_time = ktime_add_ns(old_base_time, + (n + 1) * cycle_time); + + time = ktime_to_timespec64(base_time); + } + + return time; +} + static int tc_setup_taprio(struct stmmac_priv *priv, struct tc_taprio_qopt_offload *qopt) { @@ -814,19 +837,8 @@ static int tc_setup_taprio(struct stmmac_priv *priv, /* Adjust for real system time */ priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, ¤t_time); current_time_ns = timespec64_to_ktime(current_time); - if (ktime_after(qopt->base_time, current_time_ns)) { - time = ktime_to_timespec64(qopt->base_time); - } else { - ktime_t base_time; - s64 n; - - n = div64_s64(ktime_sub_ns(current_time_ns, qopt->base_time), - qopt->cycle_time); - base_time = ktime_add_ns(qopt->base_time, - (n + 1) * qopt->cycle_time); - - time = ktime_to_timespec64(base_time); - } + time = stmmac_calc_tas_basetime(qopt->base_time, current_time_ns, + qopt->cycle_time); priv->plat->est->btr[0] = (u32)time.tv_nsec; priv->plat->est->btr[1] = (u32)time.tv_sec; -- cgit v1.2.3-58-ga151 From b2aae654a4794ef898ad33a179f341eb610f6b85 Mon Sep 17 00:00:00 2001 From: Xiaoliang Yang Date: Mon, 5 Jul 2021 18:26:54 +0800 Subject: net: stmmac: add mutex lock to protect est parameters Add a mutex lock to protect est structure parameters so that the EST parameters can be updated by other threads. Signed-off-by: Xiaoliang Yang Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 12 +++++++++++- include/linux/stmmac.h | 1 + 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index 596626c71189..2e3cdf540168 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -796,14 +796,18 @@ static int tc_setup_taprio(struct stmmac_priv *priv, GFP_KERNEL); if (!plat->est) return -ENOMEM; + + mutex_init(&priv->plat->est->lock); } else { memset(plat->est, 0, sizeof(*plat->est)); } size = qopt->num_entries; + mutex_lock(&priv->plat->est->lock); priv->plat->est->gcl_size = size; priv->plat->est->enable = qopt->enable; + mutex_unlock(&priv->plat->est->lock); for (i = 0; i < size; i++) { s64 delta_ns = qopt->entries[i].interval; @@ -834,6 +838,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv, priv->plat->est->gcl[i] = delta_ns | (gates << wid); } + mutex_lock(&priv->plat->est->lock); /* Adjust for real system time */ priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, ¤t_time); current_time_ns = timespec64_to_ktime(current_time); @@ -847,8 +852,10 @@ static int tc_setup_taprio(struct stmmac_priv *priv, priv->plat->est->ctr[0] = do_div(ctr, NSEC_PER_SEC); priv->plat->est->ctr[1] = (u32)ctr; - if (fpe && !priv->dma_cap.fpesel) + if (fpe && !priv->dma_cap.fpesel) { + mutex_unlock(&priv->plat->est->lock); return -EOPNOTSUPP; + } /* Actual FPE register configuration will be done after FPE handshake * is success. @@ -857,6 +864,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv, ret = stmmac_est_configure(priv, priv->ioaddr, priv->plat->est, priv->plat->clk_ptp_rate); + mutex_unlock(&priv->plat->est->lock); if (ret) { netdev_err(priv->dev, "failed to configure EST\n"); goto disable; @@ -872,9 +880,11 @@ static int tc_setup_taprio(struct stmmac_priv *priv, return 0; disable: + mutex_lock(&priv->plat->est->lock); priv->plat->est->enable = false; stmmac_est_configure(priv, priv->ioaddr, priv->plat->est, priv->plat->clk_ptp_rate); + mutex_unlock(&priv->plat->est->lock); priv->plat->fpe_cfg->enable = false; stmmac_fpe_configure(priv, priv->ioaddr, diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index d5ae621d66ba..09157b8a5810 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -115,6 +115,7 @@ struct stmmac_axi { #define EST_GCL 1024 struct stmmac_est { + struct mutex lock; int enable; u32 btr_offset[2]; u32 btr[2]; -- cgit v1.2.3-58-ga151 From e9e3720002f61cd637a49ecafae77cac230eefae Mon Sep 17 00:00:00 2001 From: Xiaoliang Yang Date: Mon, 5 Jul 2021 18:26:55 +0800 Subject: net: stmmac: ptp: update tas basetime after ptp adjust After adjusting the ptp time, the Qbv base time may be the past time of the new current time. dwmac5 hardware limited the base time cannot be set as past time. This patch add a btr_reserve to store the base time get from qopt, then calculate the base time and reset the Qbv configuration after ptp time adjust. Signed-off-by: Xiaoliang Yang Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 41 +++++++++++++++++++++++- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 6 +++- include/linux/stmmac.h | 1 + 3 files changed, 46 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c index 4e86cdf2bc9f..580cc035536b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c @@ -62,7 +62,8 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta) u32 sec, nsec; u32 quotient, reminder; int neg_adj = 0; - bool xmac; + bool xmac, est_rst = false; + int ret; xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac; @@ -75,10 +76,48 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta) sec = quotient; nsec = reminder; + /* If EST is enabled, disabled it before adjust ptp time. */ + if (priv->plat->est && priv->plat->est->enable) { + est_rst = true; + mutex_lock(&priv->plat->est->lock); + priv->plat->est->enable = false; + stmmac_est_configure(priv, priv->ioaddr, priv->plat->est, + priv->plat->clk_ptp_rate); + mutex_unlock(&priv->plat->est->lock); + } + spin_lock_irqsave(&priv->ptp_lock, flags); stmmac_adjust_systime(priv, priv->ptpaddr, sec, nsec, neg_adj, xmac); spin_unlock_irqrestore(&priv->ptp_lock, flags); + /* Caculate new basetime and re-configured EST after PTP time adjust. */ + if (est_rst) { + struct timespec64 current_time, time; + ktime_t current_time_ns, basetime; + u64 cycle_time; + + mutex_lock(&priv->plat->est->lock); + priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, ¤t_time); + current_time_ns = timespec64_to_ktime(current_time); + time.tv_nsec = priv->plat->est->btr_reserve[0]; + time.tv_sec = priv->plat->est->btr_reserve[1]; + basetime = timespec64_to_ktime(time); + cycle_time = priv->plat->est->ctr[1] * NSEC_PER_SEC + + priv->plat->est->ctr[0]; + time = stmmac_calc_tas_basetime(basetime, + current_time_ns, + cycle_time); + + priv->plat->est->btr[0] = (u32)time.tv_nsec; + priv->plat->est->btr[1] = (u32)time.tv_sec; + priv->plat->est->enable = true; + ret = stmmac_est_configure(priv, priv->ioaddr, priv->plat->est, + priv->plat->clk_ptp_rate); + mutex_unlock(&priv->plat->est->lock); + if (ret) + netdev_err(priv->dev, "failed to configure EST\n"); + } + return 0; } diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index 2e3cdf540168..4f3b6437b114 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -739,7 +739,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv, { u32 size, wid = priv->dma_cap.estwid, dep = priv->dma_cap.estdep; struct plat_stmmacenet_data *plat = priv->plat; - struct timespec64 time, current_time; + struct timespec64 time, current_time, qopt_time; ktime_t current_time_ns; bool fpe = false; int i, ret = 0; @@ -848,6 +848,10 @@ static int tc_setup_taprio(struct stmmac_priv *priv, priv->plat->est->btr[0] = (u32)time.tv_nsec; priv->plat->est->btr[1] = (u32)time.tv_sec; + qopt_time = ktime_to_timespec64(qopt->base_time); + priv->plat->est->btr_reserve[0] = (u32)qopt_time.tv_nsec; + priv->plat->est->btr_reserve[1] = (u32)qopt_time.tv_sec; + ctr = qopt->cycle_time; priv->plat->est->ctr[0] = do_div(ctr, NSEC_PER_SEC); priv->plat->est->ctr[1] = (u32)ctr; diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 09157b8a5810..a6f03b36fc4f 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -117,6 +117,7 @@ struct stmmac_axi { struct stmmac_est { struct mutex lock; int enable; + u32 btr_reserve[2]; u32 btr_offset[2]; u32 btr[2]; u32 ctr[2]; -- cgit v1.2.3-58-ga151 From b648eba4c69e5819880b4907e7fcb2bb576069ab Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:06 +0000 Subject: bonding: fix suspicious RCU usage in bond_ipsec_add_sa() To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Test commands: ip link add dummy0 type dummy ip link add bond0 type bond ip link set dummy0 master bond0 ip link set dummy0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 \ mode transport \ reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel \ src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp offload \ dev bond0 dir in Splat looks like: ============================= WARNING: suspicious RCU usage 5.13.0-rc3+ #1168 Not tainted ----------------------------- drivers/net/bonding/bond_main.c:411 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/684: #0: ffffffff9a2757c0 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3}, at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user] 55.191733][ T684] stack backtrace: CPU: 0 PID: 684 Comm: ip Not tainted 5.13.0-rc3+ #1168 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_add_sa+0x18c/0x1f0 [bonding] xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? netlink_ack+0x9d0/0x9d0 ? netlink_deliver_tap+0x17c/0xa50 xfrm_netlink_rcv+0x68/0x80 [xfrm_user] netlink_unicast+0x41c/0x610 ? netlink_attachskb+0x710/0x710 netlink_sendmsg+0x6b9/0xb70 [ ... ] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 0ff7567bd04f..d4d718e04dcc 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -403,10 +403,12 @@ static int bond_ipsec_add_sa(struct xfrm_state *xs) struct net_device *bond_dev = xs->xso.dev; struct bonding *bond; struct slave *slave; + int err; if (!bond_dev) return -EINVAL; + rcu_read_lock(); bond = netdev_priv(bond_dev); slave = rcu_dereference(bond->curr_active_slave); xs->xso.real_dev = slave->dev; @@ -415,10 +417,13 @@ static int bond_ipsec_add_sa(struct xfrm_state *xs) if (!(slave->dev->xfrmdev_ops && slave->dev->xfrmdev_ops->xdo_dev_state_add)) { slave_warn(bond_dev, slave->dev, "Slave does not support ipsec offload\n"); + rcu_read_unlock(); return -EINVAL; } - return slave->dev->xfrmdev_ops->xdo_dev_state_add(xs); + err = slave->dev->xfrmdev_ops->xdo_dev_state_add(xs); + rcu_read_unlock(); + return err; } /** -- cgit v1.2.3-58-ga151 From 105cd17a866017b45f3c45901b394c711c97bf40 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:07 +0000 Subject: bonding: fix null dereference in bond_ipsec_add_sa() If bond doesn't have real device, bond->curr_active_slave is null. But bond_ipsec_add_sa() dereferences bond->curr_active_slave without null checking. So, null-ptr-deref would occur. Test commands: ip link add bond0 type bond ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi \ 0x07 mode transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 4 PID: 680 Comm: ip Not tainted 5.13.0-rc3+ #1168 RIP: 0010:bond_ipsec_add_sa+0xc4/0x2e0 [bonding] Code: 85 21 02 00 00 4d 8b a6 48 0c 00 00 e8 75 58 44 ce 85 c0 0f 85 14 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 fc 01 00 00 48 8d bb e0 02 00 00 4d 8b 2c 24 48 RSP: 0018:ffff88810946f508 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88810b4e8040 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff8fe34280 RDI: ffff888115abe100 RBP: ffff88810946f528 R08: 0000000000000003 R09: fffffbfff2287e11 R10: 0000000000000001 R11: ffff888115abe0c8 R12: 0000000000000000 R13: ffffffffc0aea9a0 R14: ffff88800d7d2000 R15: ffff88810b4e8330 FS: 00007efc5552e680(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c2530dbf40 CR3: 0000000103056004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? netlink_ack+0x9d0/0x9d0 ? netlink_deliver_tap+0x17c/0xa50 xfrm_netlink_rcv+0x68/0x80 [xfrm_user] netlink_unicast+0x41c/0x610 ? netlink_attachskb+0x710/0x710 netlink_sendmsg+0x6b9/0xb70 [ ...] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d4d718e04dcc..5466b24ceab6 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -411,6 +411,11 @@ static int bond_ipsec_add_sa(struct xfrm_state *xs) rcu_read_lock(); bond = netdev_priv(bond_dev); slave = rcu_dereference(bond->curr_active_slave); + if (!slave) { + rcu_read_unlock(); + return -ENODEV; + } + xs->xso.real_dev = slave->dev; bond->xs = xs; -- cgit v1.2.3-58-ga151 From 09adf7566d436322ced595b166dea48b06852efe Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:08 +0000 Subject: net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops There are two pointers in struct xfrm_state_offload, *dev, *real_dev. These are used in callback functions of struct xfrmdev_ops. The *dev points whether bonding interface or real interface. If bonding ipsec offload is used, it points bonding interface If not, it points real interface. And real_dev always points real interface. So, netdevsim should always use real_dev instead of dev. Of course, real_dev always not be null. Test commands: ip netns add A ip netns exec A bash modprobe netdevsim echo "1 1" > /sys/bus/netdevsim/new_device ip link add bond0 type bond mode active-backup ip link set eth0 master bond0 ip link set eth0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: BUG: spinlock bad magic on CPU#5, kworker/5:1/53 lock: 0xffff8881068c2cc8, .magic: 11121314, .owner: /-1, .owner_cpu: -235736076 CPU: 5 PID: 53 Comm: kworker/5:1 Not tainted 5.13.0-rc3+ #1168 Workqueue: events linkwatch_event Call Trace: dump_stack+0xa4/0xe5 do_raw_spin_lock+0x20b/0x270 ? rwlock_bug.part.1+0x90/0x90 _raw_spin_lock_nested+0x5f/0x70 bond_get_stats+0xe4/0x4c0 [bonding] ? rcu_read_lock_sched_held+0xc0/0xc0 ? bond_neigh_init+0x2c0/0x2c0 [bonding] ? dev_get_alias+0xe2/0x190 ? dev_get_port_parent_id+0x14a/0x360 ? rtnl_unregister+0x190/0x190 ? dev_get_phys_port_name+0xa0/0xa0 ? memset+0x1f/0x40 ? memcpy+0x38/0x60 ? rtnl_phys_switch_id_fill+0x91/0x100 dev_get_stats+0x8c/0x270 rtnl_fill_stats+0x44/0xbe0 ? nla_put+0xbe/0x140 rtnl_fill_ifinfo+0x1054/0x3ad0 [ ... ] Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/netdevsim/ipsec.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/netdevsim/ipsec.c b/drivers/net/netdevsim/ipsec.c index 3811f1bde84e..b80ed2ffd45e 100644 --- a/drivers/net/netdevsim/ipsec.c +++ b/drivers/net/netdevsim/ipsec.c @@ -85,7 +85,7 @@ static int nsim_ipsec_parse_proto_keys(struct xfrm_state *xs, u32 *mykey, u32 *mysalt) { const char aes_gcm_name[] = "rfc4106(gcm(aes))"; - struct net_device *dev = xs->xso.dev; + struct net_device *dev = xs->xso.real_dev; unsigned char *key_data; char *alg_name = NULL; int key_len; @@ -134,7 +134,7 @@ static int nsim_ipsec_add_sa(struct xfrm_state *xs) u16 sa_idx; int ret; - dev = xs->xso.dev; + dev = xs->xso.real_dev; ns = netdev_priv(dev); ipsec = &ns->ipsec; @@ -194,7 +194,7 @@ static int nsim_ipsec_add_sa(struct xfrm_state *xs) static void nsim_ipsec_del_sa(struct xfrm_state *xs) { - struct netdevsim *ns = netdev_priv(xs->xso.dev); + struct netdevsim *ns = netdev_priv(xs->xso.real_dev); struct nsim_ipsec *ipsec = &ns->ipsec; u16 sa_idx; @@ -211,7 +211,7 @@ static void nsim_ipsec_del_sa(struct xfrm_state *xs) static bool nsim_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs) { - struct netdevsim *ns = netdev_priv(xs->xso.dev); + struct netdevsim *ns = netdev_priv(xs->xso.real_dev); struct nsim_ipsec *ipsec = &ns->ipsec; ipsec->ok++; -- cgit v1.2.3-58-ga151 From 2de7e4f67599affc97132bd07e30e3bd59d0b777 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:09 +0000 Subject: ixgbevf: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops There are two pointers in struct xfrm_state_offload, *dev, *real_dev. These are used in callback functions of struct xfrmdev_ops. The *dev points whether bonding interface or real interface. If bonding ipsec offload is used, it points bonding interface If not, it points real interface. And real_dev always points real interface. So, ixgbevf should always use real_dev instead of dev. Of course, real_dev always not be null. Test commands: ip link add bond0 type bond #eth0 is ixgbevf interface ip link set eth0 master bond0 ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 688 Comm: ip Not tainted 5.13.0-rc3+ #1168 RIP: 0010:ixgbevf_ipsec_find_empty_idx+0x28/0x1b0 [ixgbevf] Code: 00 00 0f 1f 44 00 00 55 53 48 89 fb 48 83 ec 08 40 84 f6 0f 84 9c 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 01 0f 8e 4c 01 00 00 66 81 3b 00 04 0f RSP: 0018:ffff8880089af390 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff8880089af4f8 R08: 0000000000000003 R09: fffffbfff4287e11 R10: 0000000000000001 R11: ffff888005de8908 R12: 0000000000000000 R13: ffff88810936a000 R14: ffff88810936a000 R15: ffff888004d78040 FS: 00007fdf9883a680(0000) GS:ffff88811a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bc14adbf40 CR3: 000000000b87c005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ixgbevf_ipsec_add_sa+0x1bf/0x9c0 [ixgbevf] ? rcu_read_lock_sched_held+0x91/0xc0 ? ixgbevf_ipsec_parse_proto_keys.isra.9+0x280/0x280 [ixgbevf] ? lock_acquire+0x191/0x720 ? bond_ipsec_add_sa+0x48/0x350 [bonding] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 ? rcu_read_lock_held+0x91/0xa0 ? rcu_read_lock_sched_held+0xc0/0xc0 bond_ipsec_add_sa+0x193/0x350 [bonding] xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 [ ... ] Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbevf/ipsec.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbevf/ipsec.c b/drivers/net/ethernet/intel/ixgbevf/ipsec.c index caaea2c920a6..e3e4676af9e4 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ipsec.c +++ b/drivers/net/ethernet/intel/ixgbevf/ipsec.c @@ -211,7 +211,7 @@ struct xfrm_state *ixgbevf_ipsec_find_rx_state(struct ixgbevf_ipsec *ipsec, static int ixgbevf_ipsec_parse_proto_keys(struct xfrm_state *xs, u32 *mykey, u32 *mysalt) { - struct net_device *dev = xs->xso.dev; + struct net_device *dev = xs->xso.real_dev; unsigned char *key_data; char *alg_name = NULL; int key_len; @@ -260,12 +260,15 @@ static int ixgbevf_ipsec_parse_proto_keys(struct xfrm_state *xs, **/ static int ixgbevf_ipsec_add_sa(struct xfrm_state *xs) { - struct net_device *dev = xs->xso.dev; - struct ixgbevf_adapter *adapter = netdev_priv(dev); - struct ixgbevf_ipsec *ipsec = adapter->ipsec; + struct net_device *dev = xs->xso.real_dev; + struct ixgbevf_adapter *adapter; + struct ixgbevf_ipsec *ipsec; u16 sa_idx; int ret; + adapter = netdev_priv(dev); + ipsec = adapter->ipsec; + if (xs->id.proto != IPPROTO_ESP && xs->id.proto != IPPROTO_AH) { netdev_err(dev, "Unsupported protocol 0x%04x for IPsec offload\n", xs->id.proto); @@ -383,11 +386,14 @@ static int ixgbevf_ipsec_add_sa(struct xfrm_state *xs) **/ static void ixgbevf_ipsec_del_sa(struct xfrm_state *xs) { - struct net_device *dev = xs->xso.dev; - struct ixgbevf_adapter *adapter = netdev_priv(dev); - struct ixgbevf_ipsec *ipsec = adapter->ipsec; + struct net_device *dev = xs->xso.real_dev; + struct ixgbevf_adapter *adapter; + struct ixgbevf_ipsec *ipsec; u16 sa_idx; + adapter = netdev_priv(dev); + ipsec = adapter->ipsec; + if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) { sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_RX_INDEX; -- cgit v1.2.3-58-ga151 From a22c39b831a081da9b2c488bd970a4412d926f30 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:10 +0000 Subject: bonding: fix suspicious RCU usage in bond_ipsec_del_sa() To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Test commands: ip netns add A ip netns exec A bash modprobe netdevsim echo "1 1" > /sys/bus/netdevsim/new_device ip link add bond0 type bond ip link set eth0 master bond0 ip link set eth0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in ip x s f Splat looks like: ============================= WARNING: suspicious RCU usage 5.13.0-rc3+ #1168 Not tainted ----------------------------- drivers/net/bonding/bond_main.c:448 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ip/705: #0: ffff888106701780 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3}, at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user] #1: ffff8880075b0098 (&x->lock){+.-.}-{2:2}, at: xfrm_state_delete+0x16/0x30 stack backtrace: CPU: 6 PID: 705 Comm: ip Not tainted 5.13.0-rc3+ #1168 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_del_sa+0x16a/0x1c0 [bonding] __xfrm_state_delete+0x51f/0x730 xfrm_state_delete+0x1e/0x30 xfrm_state_flush+0x22f/0x390 xfrm_flush_sa+0xd8/0x260 [xfrm_user] ? xfrm_flush_policy+0x290/0x290 [xfrm_user] xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 [ ... ] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 5466b24ceab6..aa9c469ebbb5 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -444,21 +444,24 @@ static void bond_ipsec_del_sa(struct xfrm_state *xs) if (!bond_dev) return; + rcu_read_lock(); bond = netdev_priv(bond_dev); slave = rcu_dereference(bond->curr_active_slave); if (!slave) - return; + goto out; xs->xso.real_dev = slave->dev; if (!(slave->dev->xfrmdev_ops && slave->dev->xfrmdev_ops->xdo_dev_state_delete)) { slave_warn(bond_dev, slave->dev, "%s: no slave xdo_dev_state_delete\n", __func__); - return; + goto out; } slave->dev->xfrmdev_ops->xdo_dev_state_delete(xs); +out: + rcu_read_unlock(); } /** -- cgit v1.2.3-58-ga151 From b121693381b112b78c076dea171ee113e237c0e4 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:11 +0000 Subject: bonding: disallow setting nested bonding + ipsec offload bonding interface can be nested and it supports ipsec offload. So, it allows setting the nested bonding + ipsec scenario. But code does not support this scenario. So, it should be disallowed. interface graph: bond2 | bond1 | eth0 The nested bonding + ipsec offload may not a real usecase. So, disallowing this scenario is fine. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index aa9c469ebbb5..f7b89743fab9 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -419,8 +419,9 @@ static int bond_ipsec_add_sa(struct xfrm_state *xs) xs->xso.real_dev = slave->dev; bond->xs = xs; - if (!(slave->dev->xfrmdev_ops - && slave->dev->xfrmdev_ops->xdo_dev_state_add)) { + if (!slave->dev->xfrmdev_ops || + !slave->dev->xfrmdev_ops->xdo_dev_state_add || + netif_is_bond_master(slave->dev)) { slave_warn(bond_dev, slave->dev, "Slave does not support ipsec offload\n"); rcu_read_unlock(); return -EINVAL; @@ -453,8 +454,9 @@ static void bond_ipsec_del_sa(struct xfrm_state *xs) xs->xso.real_dev = slave->dev; - if (!(slave->dev->xfrmdev_ops - && slave->dev->xfrmdev_ops->xdo_dev_state_delete)) { + if (!slave->dev->xfrmdev_ops || + !slave->dev->xfrmdev_ops->xdo_dev_state_delete || + netif_is_bond_master(slave->dev)) { slave_warn(bond_dev, slave->dev, "%s: no slave xdo_dev_state_delete\n", __func__); goto out; } @@ -479,8 +481,9 @@ static bool bond_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs) if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) return true; - if (!(slave_dev->xfrmdev_ops - && slave_dev->xfrmdev_ops->xdo_dev_offload_ok)) { + if (!slave_dev->xfrmdev_ops || + !slave_dev->xfrmdev_ops->xdo_dev_offload_ok || + netif_is_bond_master(slave_dev)) { slave_warn(bond_dev, slave_dev, "%s: no slave xdo_dev_offload_ok\n", __func__); return false; } -- cgit v1.2.3-58-ga151 From 9a5605505d9c7dbfdb89cc29a8f5fc5cf9fd2334 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:12 +0000 Subject: bonding: Add struct bond_ipesc to manage SA bonding has been supporting ipsec offload. When SA is added, bonding just passes SA to its own active real interface. But it doesn't manage SA. So, when events(add/del real interface, active real interface change, etc) occur, bonding can't handle that well because It doesn't manage SA. So some problems(panic, UAF, refcnt leak)occur. In order to make it stable, it should manage SA. That's the reason why struct bond_ipsec is added. When a new SA is added to bonding interface, it is stored in the bond_ipsec list. And the SA is passed to a current active real interface. If events occur, it uses bond_ipsec data to handle these events. bond->ipsec_list is protected by bond->ipsec_lock. If a current active real interface is changed, the following logic works. 1. delete all SAs from old active real interface 2. Add all SAs to the new active real interface. 3. If a new active real interface doesn't support ipsec offload or SA's option, it sets real_dev to NULL. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 139 ++++++++++++++++++++++++++++++++++------ include/net/bonding.h | 9 ++- 2 files changed, 127 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index f7b89743fab9..165fa55cfb38 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -401,6 +401,7 @@ static int bond_vlan_rx_kill_vid(struct net_device *bond_dev, static int bond_ipsec_add_sa(struct xfrm_state *xs) { struct net_device *bond_dev = xs->xso.dev; + struct bond_ipsec *ipsec; struct bonding *bond; struct slave *slave; int err; @@ -416,9 +417,6 @@ static int bond_ipsec_add_sa(struct xfrm_state *xs) return -ENODEV; } - xs->xso.real_dev = slave->dev; - bond->xs = xs; - if (!slave->dev->xfrmdev_ops || !slave->dev->xfrmdev_ops->xdo_dev_state_add || netif_is_bond_master(slave->dev)) { @@ -427,11 +425,63 @@ static int bond_ipsec_add_sa(struct xfrm_state *xs) return -EINVAL; } + ipsec = kmalloc(sizeof(*ipsec), GFP_ATOMIC); + if (!ipsec) { + rcu_read_unlock(); + return -ENOMEM; + } + xs->xso.real_dev = slave->dev; + err = slave->dev->xfrmdev_ops->xdo_dev_state_add(xs); + if (!err) { + ipsec->xs = xs; + INIT_LIST_HEAD(&ipsec->list); + spin_lock_bh(&bond->ipsec_lock); + list_add(&ipsec->list, &bond->ipsec_list); + spin_unlock_bh(&bond->ipsec_lock); + } else { + kfree(ipsec); + } rcu_read_unlock(); return err; } +static void bond_ipsec_add_sa_all(struct bonding *bond) +{ + struct net_device *bond_dev = bond->dev; + struct bond_ipsec *ipsec; + struct slave *slave; + + rcu_read_lock(); + slave = rcu_dereference(bond->curr_active_slave); + if (!slave) + goto out; + + if (!slave->dev->xfrmdev_ops || + !slave->dev->xfrmdev_ops->xdo_dev_state_add || + netif_is_bond_master(slave->dev)) { + spin_lock_bh(&bond->ipsec_lock); + if (!list_empty(&bond->ipsec_list)) + slave_warn(bond_dev, slave->dev, + "%s: no slave xdo_dev_state_add\n", + __func__); + spin_unlock_bh(&bond->ipsec_lock); + goto out; + } + + spin_lock_bh(&bond->ipsec_lock); + list_for_each_entry(ipsec, &bond->ipsec_list, list) { + ipsec->xs->xso.real_dev = slave->dev; + if (slave->dev->xfrmdev_ops->xdo_dev_state_add(ipsec->xs)) { + slave_warn(bond_dev, slave->dev, "%s: failed to add SA\n", __func__); + ipsec->xs->xso.real_dev = NULL; + } + } + spin_unlock_bh(&bond->ipsec_lock); +out: + rcu_read_unlock(); +} + /** * bond_ipsec_del_sa - clear out this specific SA * @xs: pointer to transformer state struct @@ -439,6 +489,7 @@ static int bond_ipsec_add_sa(struct xfrm_state *xs) static void bond_ipsec_del_sa(struct xfrm_state *xs) { struct net_device *bond_dev = xs->xso.dev; + struct bond_ipsec *ipsec; struct bonding *bond; struct slave *slave; @@ -452,7 +503,10 @@ static void bond_ipsec_del_sa(struct xfrm_state *xs) if (!slave) goto out; - xs->xso.real_dev = slave->dev; + if (!xs->xso.real_dev) + goto out; + + WARN_ON(xs->xso.real_dev != slave->dev); if (!slave->dev->xfrmdev_ops || !slave->dev->xfrmdev_ops->xdo_dev_state_delete || @@ -463,6 +517,48 @@ static void bond_ipsec_del_sa(struct xfrm_state *xs) slave->dev->xfrmdev_ops->xdo_dev_state_delete(xs); out: + spin_lock_bh(&bond->ipsec_lock); + list_for_each_entry(ipsec, &bond->ipsec_list, list) { + if (ipsec->xs == xs) { + list_del(&ipsec->list); + kfree(ipsec); + break; + } + } + spin_unlock_bh(&bond->ipsec_lock); + rcu_read_unlock(); +} + +static void bond_ipsec_del_sa_all(struct bonding *bond) +{ + struct net_device *bond_dev = bond->dev; + struct bond_ipsec *ipsec; + struct slave *slave; + + rcu_read_lock(); + slave = rcu_dereference(bond->curr_active_slave); + if (!slave) { + rcu_read_unlock(); + return; + } + + spin_lock_bh(&bond->ipsec_lock); + list_for_each_entry(ipsec, &bond->ipsec_list, list) { + if (!ipsec->xs->xso.real_dev) + continue; + + if (!slave->dev->xfrmdev_ops || + !slave->dev->xfrmdev_ops->xdo_dev_state_delete || + netif_is_bond_master(slave->dev)) { + slave_warn(bond_dev, slave->dev, + "%s: no slave xdo_dev_state_delete\n", + __func__); + } else { + slave->dev->xfrmdev_ops->xdo_dev_state_delete(ipsec->xs); + } + ipsec->xs->xso.real_dev = NULL; + } + spin_unlock_bh(&bond->ipsec_lock); rcu_read_unlock(); } @@ -474,22 +570,27 @@ out: static bool bond_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs) { struct net_device *bond_dev = xs->xso.dev; - struct bonding *bond = netdev_priv(bond_dev); - struct slave *curr_active = rcu_dereference(bond->curr_active_slave); - struct net_device *slave_dev = curr_active->dev; + struct net_device *real_dev; + struct slave *curr_active; + struct bonding *bond; + + bond = netdev_priv(bond_dev); + curr_active = rcu_dereference(bond->curr_active_slave); + real_dev = curr_active->dev; if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) return true; - if (!slave_dev->xfrmdev_ops || - !slave_dev->xfrmdev_ops->xdo_dev_offload_ok || - netif_is_bond_master(slave_dev)) { - slave_warn(bond_dev, slave_dev, "%s: no slave xdo_dev_offload_ok\n", __func__); + if (!xs->xso.real_dev) + return false; + + if (!real_dev->xfrmdev_ops || + !real_dev->xfrmdev_ops->xdo_dev_offload_ok || + netif_is_bond_master(real_dev)) { return false; } - xs->xso.real_dev = slave_dev; - return slave_dev->xfrmdev_ops->xdo_dev_offload_ok(skb, xs); + return real_dev->xfrmdev_ops->xdo_dev_offload_ok(skb, xs); } static const struct xfrmdev_ops bond_xfrmdev_ops = { @@ -1006,8 +1107,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active) return; #ifdef CONFIG_XFRM_OFFLOAD - if (old_active && bond->xs) - bond_ipsec_del_sa(bond->xs); + bond_ipsec_del_sa_all(bond); #endif /* CONFIG_XFRM_OFFLOAD */ if (new_active) { @@ -1082,10 +1182,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active) } #ifdef CONFIG_XFRM_OFFLOAD - if (new_active && bond->xs) { - xfrm_dev_state_flush(dev_net(bond->dev), bond->dev, true); - bond_ipsec_add_sa(bond->xs); - } + bond_ipsec_add_sa_all(bond); #endif /* CONFIG_XFRM_OFFLOAD */ /* resend IGMP joins since active slave has changed or @@ -3343,6 +3440,7 @@ static int bond_master_netdev_event(unsigned long event, return bond_event_changename(event_bond); case NETDEV_UNREGISTER: bond_remove_proc_entry(event_bond); + xfrm_dev_state_flush(dev_net(bond_dev), bond_dev, true); break; case NETDEV_REGISTER: bond_create_proc_entry(event_bond); @@ -4910,7 +5008,8 @@ void bond_setup(struct net_device *bond_dev) #ifdef CONFIG_XFRM_OFFLOAD /* set up xfrm device ops (only supported in active-backup right now) */ bond_dev->xfrmdev_ops = &bond_xfrmdev_ops; - bond->xs = NULL; + INIT_LIST_HEAD(&bond->ipsec_list); + spin_lock_init(&bond->ipsec_lock); #endif /* CONFIG_XFRM_OFFLOAD */ /* don't acquire bond device's netif_tx_lock when transmitting */ diff --git a/include/net/bonding.h b/include/net/bonding.h index 15335732e166..625d9c72dee3 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -201,6 +201,11 @@ struct bond_up_slave { */ #define BOND_LINK_NOCHANGE -1 +struct bond_ipsec { + struct list_head list; + struct xfrm_state *xs; +}; + /* * Here are the locking policies for the two bonding locks: * Get rcu_read_lock when reading or RTNL when writing slave list. @@ -249,7 +254,9 @@ struct bonding { #endif /* CONFIG_DEBUG_FS */ struct rtnl_link_stats64 bond_stats; #ifdef CONFIG_XFRM_OFFLOAD - struct xfrm_state *xs; + struct list_head ipsec_list; + /* protecting ipsec_list */ + spinlock_t ipsec_lock; #endif /* CONFIG_XFRM_OFFLOAD */ }; -- cgit v1.2.3-58-ga151 From 955b785ec6b3b2f9b91914d6eeac8ee66ee29239 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:13 +0000 Subject: bonding: fix suspicious RCU usage in bond_ipsec_offload_ok() To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Splat looks like: WARNING: suspicious RCU usage 5.13.0-rc6+ #1179 Not tainted drivers/net/bonding/bond_main.c:571 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ping/974: #0: ffff888109e7db70 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x1303/0x2cb0 stack backtrace: CPU: 2 PID: 974 Comm: ping Not tainted 5.13.0-rc6+ #1179 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_offload_ok+0x1f4/0x260 [bonding] xfrm_output+0x179/0x890 xfrm4_output+0xfa/0x410 ? __xfrm4_output+0x4b0/0x4b0 ? __ip_make_skb+0xecc/0x2030 ? xfrm4_udp_encap_rcv+0x800/0x800 ? ip_local_out+0x21/0x3a0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1bfd/0x2cb0 Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 165fa55cfb38..780f87869e36 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -573,24 +573,34 @@ static bool bond_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs) struct net_device *real_dev; struct slave *curr_active; struct bonding *bond; + int err; bond = netdev_priv(bond_dev); + rcu_read_lock(); curr_active = rcu_dereference(bond->curr_active_slave); real_dev = curr_active->dev; - if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) - return true; + if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { + err = true; + goto out; + } - if (!xs->xso.real_dev) - return false; + if (!xs->xso.real_dev) { + err = false; + goto out; + } if (!real_dev->xfrmdev_ops || !real_dev->xfrmdev_ops->xdo_dev_offload_ok || netif_is_bond_master(real_dev)) { - return false; + err = false; + goto out; } - return real_dev->xfrmdev_ops->xdo_dev_offload_ok(skb, xs); + err = real_dev->xfrmdev_ops->xdo_dev_offload_ok(skb, xs); +out: + rcu_read_unlock(); + return err; } static const struct xfrmdev_ops bond_xfrmdev_ops = { -- cgit v1.2.3-58-ga151 From 168e696a36792a4a3b2525a06249e7472ef90186 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Jul 2021 15:38:14 +0000 Subject: bonding: fix incorrect return value of bond_ipsec_offload_ok() bond_ipsec_offload_ok() is called to check whether the interface supports ipsec offload or not. bonding interface support ipsec offload only in active-backup mode. So, if a bond interface is not in active-backup mode, it should return false but it returns true. Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 780f87869e36..d22d78303311 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -581,7 +581,7 @@ static bool bond_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs) real_dev = curr_active->dev; if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { - err = true; + err = false; goto out; } -- cgit v1.2.3-58-ga151 From ad1f37970875eef98eeaf478f55045f388b794a5 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 6 Jul 2021 12:18:02 +0100 Subject: octeontx2-pf: Fix assigned error return value that is never used Currently when the call to otx2_mbox_alloc_msg_cgx_mac_addr_update fails the error return variable rc is being assigned -ENOMEM and does not return early. rc is then re-assigned and the error case is not handled correctly. Fix this by returning -ENOMEM rather than assigning rc. Addresses-Coverity: ("Unused value") Fixes: 79d2be385e9e ("octeontx2-pf: offload DMAC filters to CGX/RPM block") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c index ffe3e94562d0..383a6b5cb698 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dmac_flt.c @@ -161,7 +161,7 @@ int otx2_dmacflt_update(struct otx2_nic *pf, u8 *mac, u8 bit_pos) if (!req) { mutex_unlock(&pf->mbox.lock); - rc = -ENOMEM; + return -ENOMEM; } ether_addr_copy(req->mac_addr, mac); -- cgit v1.2.3-58-ga151 From ea986908ccfcc53204a03bb0841227e1b26578c4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 2 Jul 2021 22:21:40 +0800 Subject: regulator: mtk-dvfsrc: Fix wrong dev pointer for devm_regulator_register If use dev->parent, the regulator_unregister will not be called when this driver is unloaded. Fix it by using dev instead. Signed-off-by: Axel Lin Link: https://lore.kernel.org/r/20210702142140.2678130-1-axel.lin@ingics.com Signed-off-by: Mark Brown --- drivers/regulator/mtk-dvfsrc-regulator.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/mtk-dvfsrc-regulator.c b/drivers/regulator/mtk-dvfsrc-regulator.c index d3d876198d6e..234af3a66c77 100644 --- a/drivers/regulator/mtk-dvfsrc-regulator.c +++ b/drivers/regulator/mtk-dvfsrc-regulator.c @@ -179,8 +179,7 @@ static int dvfsrc_vcore_regulator_probe(struct platform_device *pdev) for (i = 0; i < regulator_init_data->size; i++) { config.dev = dev->parent; config.driver_data = (mt_regulators + i); - rdev = devm_regulator_register(dev->parent, - &(mt_regulators + i)->desc, + rdev = devm_regulator_register(dev, &(mt_regulators + i)->desc, &config); if (IS_ERR(rdev)) { dev_err(dev, "failed to register %s\n", -- cgit v1.2.3-58-ga151 From 135cbd378eab336da15de9c84bbb22bf743b38a5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 3 Jul 2021 04:23:00 +0200 Subject: spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook."), the MX51_ECSPI_CONFIG write no longer happens in prepare_transfer hook, but rather in prepare_message hook, however the MX51_ECSPI_CONFIG delay is still left in prepare_transfer hook and thus has no effect. This leads to low bus frequency operation problems described in 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds") again. Move the MX51_ECSPI_CONFIG write delay into the prepare_message hook as well, thus reinstating the low bus frequency fix. Fixes: 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.") Signed-off-by: Marek Vasut Cc: Uwe Kleine-König Cc: Mark Brown Link: https://lore.kernel.org/r/20210703022300.296114-1-marex@denx.de Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 39dc02e366f4..4aee3db6d6df 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -506,7 +506,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, { struct spi_device *spi = msg->spi; u32 ctrl = MX51_ECSPI_CTRL_ENABLE; - u32 testreg; + u32 testreg, delay; u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG); /* set Master or Slave mode */ @@ -567,6 +567,23 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); + /* + * Wait until the changes in the configuration register CONFIGREG + * propagate into the hardware. It takes exactly one tick of the + * SCLK clock, but we will wait two SCLK clock just to be sure. The + * effect of the delay it takes for the hardware to apply changes + * is noticable if the SCLK clock run very slow. In such a case, if + * the polarity of SCLK should be inverted, the GPIO ChipSelect might + * be asserted before the SCLK polarity changes, which would disrupt + * the SPI communication as the device on the other end would consider + * the change of SCLK polarity as a clock tick already. + */ + delay = (2 * 1000000) / spi_imx->spi_bus_clk; + if (likely(delay < 10)) /* SCLK is faster than 100 kHz */ + udelay(delay); + else /* SCLK is _very_ slow */ + usleep_range(delay, delay + 10); + return 0; } @@ -574,7 +591,7 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, struct spi_device *spi) { u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL); - u32 clk, delay; + u32 clk; /* Clear BL field and set the right value */ ctrl &= ~MX51_ECSPI_CTRL_BL_MASK; @@ -596,23 +613,6 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); - /* - * Wait until the changes in the configuration register CONFIGREG - * propagate into the hardware. It takes exactly one tick of the - * SCLK clock, but we will wait two SCLK clock just to be sure. The - * effect of the delay it takes for the hardware to apply changes - * is noticable if the SCLK clock run very slow. In such a case, if - * the polarity of SCLK should be inverted, the GPIO ChipSelect might - * be asserted before the SCLK polarity changes, which would disrupt - * the SPI communication as the device on the other end would consider - * the change of SCLK polarity as a clock tick already. - */ - delay = (2 * 1000000) / clk; - if (likely(delay < 10)) /* SCLK is faster than 100 kHz */ - udelay(delay); - else /* SCLK is _very_ slow */ - usleep_range(delay, delay + 10); - return 0; } -- cgit v1.2.3-58-ga151 From 7999d2555c9f879d006ea8469d74db9cdb038af0 Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Wed, 7 Jul 2021 10:27:00 +0200 Subject: spi: stm32: fixes pm_runtime calls in probe/remove Add pm_runtime calls in probe/probe error path and remove in order to be consistent in all places in ordering and ensure that pm_runtime is disabled prior to resources used by the SPI controller. This patch also fixes the 2 following warnings on driver remove: WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24 WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support") Signed-off-by: Amelie Delaunay Signed-off-by: Alain Volmat Link: https://lore.kernel.org/r/1625646426-5826-2-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown --- drivers/spi/spi-stm32.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 65b37c8dc49f..05618a618939 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1928,6 +1928,7 @@ static int stm32_spi_probe(struct platform_device *pdev) master->can_dma = stm32_spi_can_dma; pm_runtime_set_active(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); pm_runtime_enable(&pdev->dev); ret = spi_register_master(master); @@ -1943,6 +1944,8 @@ static int stm32_spi_probe(struct platform_device *pdev) err_pm_disable: pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); err_dma_release: if (spi->dma_tx) dma_release_channel(spi->dma_tx); @@ -1959,9 +1962,14 @@ static int stm32_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct stm32_spi *spi = spi_master_get_devdata(master); + pm_runtime_get_sync(&pdev->dev); + spi_unregister_master(master); spi->cfg->disable(spi); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); if (master->dma_tx) dma_release_channel(master->dma_tx); if (master->dma_rx) @@ -1969,7 +1977,6 @@ static int stm32_spi_remove(struct platform_device *pdev) clk_disable_unprepare(spi->clk); - pm_runtime_disable(&pdev->dev); pinctrl_pm_select_sleep_state(&pdev->dev); -- cgit v1.2.3-58-ga151 From 0d472c69c6a5e22cef9e5809e2f6d0ccd5934f4a Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 7 Jul 2021 15:50:57 +0800 Subject: stmmac: dwmac-loongson: Fix unsigned comparison to zero plat->phy_interface is unsigned integer, so the condition can't be less than zero and the warning will never printed. Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index e108b0d2bd28..4c9a37dd0d3f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -49,9 +49,9 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id { struct plat_stmmacenet_data *plat; struct stmmac_resources res; - bool mdio = false; - int ret, i; struct device_node *np; + int ret, i, phy_mode; + bool mdio = false; np = dev_of_node(&pdev->dev); @@ -108,10 +108,11 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id if (plat->bus_id < 0) plat->bus_id = pci_dev_id(pdev); - plat->phy_interface = device_get_phy_mode(&pdev->dev); - if (plat->phy_interface < 0) + phy_mode = device_get_phy_mode(&pdev->dev); + if (phy_mode < 0) dev_err(&pdev->dev, "phy_mode not found\n"); + plat->phy_interface = phy_mode; plat->interface = PHY_INTERFACE_MODE_GMII; pci_set_master(pdev); -- cgit v1.2.3-58-ga151 From eca81f09145d765c21dd8fb1ba5d874ca255c32c Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 7 Jul 2021 15:53:35 +0800 Subject: stmmac: platform: Fix signedness bug in stmmac_probe_config_dt() The "plat->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: b9f0b2f634c0 ("net: stmmac: platform: fix probe for ACPI devices") Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 072eff8079d0..5ca710844cc1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -397,6 +397,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) struct device_node *np = pdev->dev.of_node; struct plat_stmmacenet_data *plat; struct stmmac_dma_cfg *dma_cfg; + int phy_mode; void *ret; int rc; @@ -412,10 +413,11 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) eth_zero_addr(mac); } - plat->phy_interface = device_get_phy_mode(&pdev->dev); - if (plat->phy_interface < 0) - return ERR_PTR(plat->phy_interface); + phy_mode = device_get_phy_mode(&pdev->dev); + if (phy_mode < 0) + return ERR_PTR(phy_mode); + plat->phy_interface = phy_mode; plat->interface = stmmac_of_get_mac_mode(np); if (plat->interface < 0) plat->interface = plat->phy_interface; -- cgit v1.2.3-58-ga151 From c90b4503ccf42d9d367e843c223df44aa550e82a Mon Sep 17 00:00:00 2001 From: Colin Xu Date: Wed, 7 Jul 2021 08:45:31 +0800 Subject: drm/i915/gvt: Clear d3_entered on elsp cmd submission. d3_entered flag is used to mark for vgpu_reset a previous power transition from D3->D0, typically for VM resume from S3, so that gvt could skip PPGTT invalidation in current vgpu_reset during resuming. In case S0ix exit, although there is D3->D0, guest driver continue to use vgpu as normal, with d3_entered set, until next shutdown/reboot or power transition. If a reboot follows a S0ix exit, device power state transite as: D0->D3->D0->D0(reboot), while system power state transites as: S0->S0 (reboot). There is no vgpu_reset until D0(reboot), thus d3_entered won't be cleared, the vgpu_reset will skip PPGTT invalidation however those PPGTT entries are no longer valid. Err appears like: gvt: vgpu 2: vfio_pin_pages failed for gfn 0xxxxx, ret -22 gvt: vgpu 2: fail: spt xxxx guest entry 0xxxxx type 2 gvt: vgpu 2: fail: shadow page xxxx guest entry 0xxxxx type 2. Give gvt a chance to clear d3_entered on elsp cmd submission so that the states before & after S0ix enter/exit are consistent. Fixes: ba25d977571e ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.") Reviewed-by: Zhenyu Wang Signed-off-by: Colin Xu Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20210707004531.4873-1-colin.xu@intel.com --- drivers/gpu/drm/i915/gvt/handlers.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index dda320749c65..2358c92733b0 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -1977,6 +1977,21 @@ static int elsp_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, if (drm_WARN_ON(&i915->drm, !engine)) return -EINVAL; + /* + * Due to d3_entered is used to indicate skipping PPGTT invalidation on + * vGPU reset, it's set on D0->D3 on PCI config write, and cleared after + * vGPU reset if in resuming. + * In S0ix exit, the device power state also transite from D3 to D0 as + * S3 resume, but no vGPU reset (triggered by QEMU devic model). After + * S0ix exit, all engines continue to work. However the d3_entered + * remains set which will break next vGPU reset logic (miss the expected + * PPGTT invalidation). + * Engines can only work in D0. Thus the 1st elsp write gives GVT a + * chance to clear d3_entered. + */ + if (vgpu->d3_entered) + vgpu->d3_entered = false; + execlist = &vgpu->submission.execlist[engine->id]; execlist->elsp_dwords.data[3 - execlist->elsp_dwords.index] = data; -- cgit v1.2.3-58-ga151 From 65e2e6c1c20104ed19060a38f4edbf14e9f9a9a5 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 1 Jul 2021 10:27:51 +0200 Subject: pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As the last call to sprd_pwm_apply() might have exited early if state->enabled was false, the values for period and duty_cycle stored in pwm->state might not have been written to hardware and it must be ensured that they are configured before enabling the PWM. Fixes: 8aae4b02e8a6 ("pwm: sprd: Add Spreadtrum PWM support") Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-sprd.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-sprd.c b/drivers/pwm/pwm-sprd.c index f2a85e8dd941..7004f55bbf11 100644 --- a/drivers/pwm/pwm-sprd.c +++ b/drivers/pwm/pwm-sprd.c @@ -183,13 +183,10 @@ static int sprd_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, } } - if (state->period != cstate->period || - state->duty_cycle != cstate->duty_cycle) { - ret = sprd_pwm_config(spc, pwm, state->duty_cycle, - state->period); - if (ret) - return ret; - } + ret = sprd_pwm_config(spc, pwm, state->duty_cycle, + state->period); + if (ret) + return ret; sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 1); } else if (cstate->enabled) { -- cgit v1.2.3-58-ga151 From fe8255f80b8617bc67a58f4ca2b54b3b9b32ff84 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 1 Jul 2021 10:27:52 +0200 Subject: pwm: spear: Ensure configuring period and duty_cycle isn't wrongly skipped MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As the last call to spear_pwm_apply() might have exited early if state->enabled was false, the values for period and duty_cycle stored in pwm->state might not have been written to hardware and it must be ensured that they are configured before enabling the PWM. Fixes: 98761ce4b91b ("pwm: spear: Implement .apply() callback") Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-spear.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c index 48c31dac2f32..54c7990967dd 100644 --- a/drivers/pwm/pwm-spear.c +++ b/drivers/pwm/pwm-spear.c @@ -177,12 +177,9 @@ static int spear_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } - if (state->period != pwm->state.period || - state->duty_cycle != pwm->state.duty_cycle) { - err = spear_pwm_config(chip, pwm, state->duty_cycle, state->period); - if (err) - return err; - } + err = spear_pwm_config(chip, pwm, state->duty_cycle, state->period); + if (err) + return err; if (!pwm->state.enabled) return spear_pwm_enable(chip, pwm); -- cgit v1.2.3-58-ga151 From 25f70b8f3d15b8c188ecb49c6007b86f3e775c20 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 1 Jul 2021 10:27:53 +0200 Subject: pwm: tiecap: Ensure configuring period and duty_cycle isn't wrongly skipped MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As the last call to ecap_pwm_apply() might have exited early if state->enabled was false, the values for period and duty_cycle stored in pwm->state might not have been written to hardware and it must be ensured that they are configured before enabling the PWM. Fixes: 0ca7acd84766 ("pwm: tiecap: Implement .apply() callback") Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tiecap.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index dec3f1fb150c..35eb19a5a0d1 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -189,16 +189,13 @@ static int ecap_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } - if (state->period != pwm->state.period || - state->duty_cycle != pwm->state.duty_cycle) { - if (state->period > NSEC_PER_SEC) - return -ERANGE; + if (state->period > NSEC_PER_SEC) + return -ERANGE; - err = ecap_pwm_config(chip, pwm, state->duty_cycle, - state->period, enabled); - if (err) - return err; - } + err = ecap_pwm_config(chip, pwm, state->duty_cycle, + state->period, enabled); + if (err) + return err; if (!enabled) return ecap_pwm_enable(chip, pwm); -- cgit v1.2.3-58-ga151 From 7d6d4aaf2809f209c7d6bcab2f9ae76797051cfa Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 1 Jul 2021 10:27:54 +0200 Subject: pwm: berlin: Ensure configuring period and duty_cycle isn't wrongly skipped MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As the last call to berlin_pwm_apply() might have exited early if state->enabled was false, the values for period and duty_cycle stored in pwm->state might not have been written to hardware and it must be ensured that they are configured before enabling the PWM. Fixes: 30dffb42fcd4 ("pwm: berlin: Implement .apply() callback") Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-berlin.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-berlin.c b/drivers/pwm/pwm-berlin.c index 5537b5f6dd5d..e157273fd2f7 100644 --- a/drivers/pwm/pwm-berlin.c +++ b/drivers/pwm/pwm-berlin.c @@ -190,12 +190,9 @@ static int berlin_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } - if (state->period != pwm->state.period || - state->duty_cycle != pwm->state.duty_cycle) { - err = berlin_pwm_config(chip, pwm, state->duty_cycle, state->period); - if (err) - return err; - } + err = berlin_pwm_config(chip, pwm, state->duty_cycle, state->period); + if (err) + return err; if (!enabled) return berlin_pwm_enable(chip, pwm); -- cgit v1.2.3-58-ga151 From f4a8e31ed84ec646c158824f423cb22d1f362bbf Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 1 Jul 2021 10:27:55 +0200 Subject: pwm: ep93xx: Ensure configuring period and duty_cycle isn't wrongly skipped MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As the last call to ep93xx_pwm_apply() might have exited early if state->enabled was false, the values for period and duty_cycle stored in pwm->state might not have been written to hardware and it must be ensured that they are configured before enabling the PWM. Fixes: 6d45374af539 ("pwm: ep93xx: Implement .apply callback") Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-ep93xx.c | 85 +++++++++++++++++++++++------------------------- 1 file changed, 40 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c index 8a3d781e6514..fc3cb7d669c6 100644 --- a/drivers/pwm/pwm-ep93xx.c +++ b/drivers/pwm/pwm-ep93xx.c @@ -64,6 +64,11 @@ static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, int ret; struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip); bool enabled = state->enabled; + void __iomem *base = ep93xx_pwm->base; + unsigned long long c; + unsigned long period_cycles; + unsigned long duty_cycles; + unsigned long term; if (state->polarity != pwm->state.polarity) { if (enabled) { @@ -97,57 +102,47 @@ static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } - if (state->period != pwm->state.period || - state->duty_cycle != pwm->state.duty_cycle) { - struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip); - void __iomem *base = ep93xx_pwm->base; - unsigned long long c; - unsigned long period_cycles; - unsigned long duty_cycles; - unsigned long term; + /* + * The clock needs to be enabled to access the PWM registers. + * Configuration can be changed at any time. + */ + if (!pwm_is_enabled(pwm)) { + ret = clk_prepare_enable(ep93xx_pwm->clk); + if (ret) + return ret; + } - /* - * The clock needs to be enabled to access the PWM registers. - * Configuration can be changed at any time. - */ - if (!pwm_is_enabled(pwm)) { - ret = clk_prepare_enable(ep93xx_pwm->clk); - if (ret) - return ret; - } + c = clk_get_rate(ep93xx_pwm->clk); + c *= state->period; + do_div(c, 1000000000); + period_cycles = c; + + c = period_cycles; + c *= state->duty_cycle; + do_div(c, state->period); + duty_cycles = c; - c = clk_get_rate(ep93xx_pwm->clk); - c *= state->period; - do_div(c, 1000000000); - period_cycles = c; - - c = period_cycles; - c *= state->duty_cycle; - do_div(c, state->period); - duty_cycles = c; - - if (period_cycles < 0x10000 && duty_cycles < 0x10000) { - term = readw(base + EP93XX_PWMx_TERM_COUNT); - - /* Order is important if PWM is running */ - if (period_cycles > term) { - writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT); - writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE); - } else { - writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE); - writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT); - } - ret = 0; + if (period_cycles < 0x10000 && duty_cycles < 0x10000) { + term = readw(base + EP93XX_PWMx_TERM_COUNT); + + /* Order is important if PWM is running */ + if (period_cycles > term) { + writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT); + writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE); } else { - ret = -EINVAL; + writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE); + writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT); } + ret = 0; + } else { + ret = -EINVAL; + } - if (!pwm_is_enabled(pwm)) - clk_disable_unprepare(ep93xx_pwm->clk); + if (!pwm_is_enabled(pwm)) + clk_disable_unprepare(ep93xx_pwm->clk); - if (ret) - return ret; - } + if (ret) + return ret; if (!enabled) { ret = clk_prepare_enable(ep93xx_pwm->clk); -- cgit v1.2.3-58-ga151 From debdd8e31895fdd1e2cfeb7a5aff1c83e49a91ba Mon Sep 17 00:00:00 2001 From: Jonathan Lemon Date: Thu, 8 Jul 2021 11:04:08 -0700 Subject: ptp: Relocate lookup cookie to correct block. An earlier commit set the pps_lookup cookie, but the line was somehow added to the wrong code block. Correct this. Fixes: 8602e40fc813 ("ptp: Set lookup cookie when creating a PTP PPS source.") Signed-off-by: Jonathan Lemon Signed-off-by: Dario Binacchi Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index ce6d9fc85607..4dfc52e06704 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -232,7 +232,6 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, pr_err("failed to create ptp aux_worker %d\n", err); goto kworker_err; } - ptp->pps_source->lookup_cookie = ptp; } /* PTP virtual clock is being registered under physical clock */ @@ -268,6 +267,7 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, pr_err("failed to register pps source\n"); goto no_pps; } + ptp->pps_source->lookup_cookie = ptp; } /* Initialize a new device of our class in our clock structure. */ -- cgit v1.2.3-58-ga151 From b9d233ea21f192702f8bbf3f5f640e2dde308b25 Mon Sep 17 00:00:00 2001 From: Gatis Peisenieks Date: Thu, 8 Jul 2021 12:49:04 +0300 Subject: atl1c: fix Mikrotik 10/25G NIC detection Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable, on rare occasions it can happen that some physical functions of the NIC do not get initialized due to timeouted early MDIO op. This changes the atl1c probe on Mikrotik 10/25G NIC not to depend on MDIO op emulation. Signed-off-by: Gatis Peisenieks Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c index 7dff20350865..f19370c33444 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c @@ -594,6 +594,11 @@ int atl1c_phy_init(struct atl1c_hw *hw) int ret_val; u16 mii_bmcr_data = BMCR_RESET; + if (hw->nic_type == athr_mt) { + hw->phy_configured = true; + return 0; + } + if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) || (atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) { dev_err(&pdev->dev, "Error get phy ID\n"); -- cgit v1.2.3-58-ga151 From c34269041185dad1bab7a34f42ef9fab967a1684 Mon Sep 17 00:00:00 2001 From: Aaron Ma Date: Thu, 8 Jul 2021 21:17:10 +0800 Subject: mt76: mt7921: continue to probe driver when fw already downloaded When reboot system, no power cycles, firmware is already downloaded, return -EIO will break driver as error: mt7921e: probe of 0000:03:00.0 failed with error -5 Skip firmware download and continue to probe. Signed-off-by: Aaron Ma Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support") Signed-off-by: David S. Miller --- drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c index c2c4dc196802..cd690c64f65b 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c @@ -931,7 +931,7 @@ static int mt7921_load_firmware(struct mt7921_dev *dev) ret = mt76_get_field(dev, MT_CONN_ON_MISC, MT_TOP_MISC2_FW_N9_RDY); if (ret) { dev_dbg(dev->mt76.dev, "Firmware is already download\n"); - return -EIO; + goto fw_loaded; } ret = mt7921_load_patch(dev); @@ -949,6 +949,7 @@ static int mt7921_load_firmware(struct mt7921_dev *dev) return -EIO; } +fw_loaded: mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[MT_MCUQ_FWDL], false); #ifdef CONFIG_PM -- cgit v1.2.3-58-ga151 From 015fe6fd29c4b9ac0f61b8c4455ef88e6018b9cc Mon Sep 17 00:00:00 2001 From: Shahjada Abul Husain Date: Thu, 8 Jul 2021 21:51:56 +0530 Subject: cxgb4: fix IRQ free race during driver unload IRQs are requested during driver's ndo_open() and then later freed up in disable_interrupts() during driver unload. A race exists where driver can set the CXGB4_FULL_INIT_DONE flag in ndo_open() after the disable_interrupts() in driver unload path checks it, and hence misses calling free_irq(). Fix by unregistering netdevice first and sync with driver's ndo_open(). This ensures disable_interrupts() checks the flag correctly and frees up the IRQs properly. Fixes: b37987e8db5f ("cxgb4: Disable interrupts and napi before unregistering netdev") Signed-off-by: Shahjada Abul Husain Signed-off-by: Raju Rangoju Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 18 ++++++++++-------- drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c | 3 +++ 2 files changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 9a2b166d651e..dbf9a0e6601d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -2643,6 +2643,9 @@ static void detach_ulds(struct adapter *adap) { unsigned int i; + if (!is_uld(adap)) + return; + mutex_lock(&uld_mutex); list_del(&adap->list_node); @@ -7141,10 +7144,13 @@ static void remove_one(struct pci_dev *pdev) */ destroy_workqueue(adapter->workq); - if (is_uld(adapter)) { - detach_ulds(adapter); - t4_uld_clean_up(adapter); - } + detach_ulds(adapter); + + for_each_port(adapter, i) + if (adapter->port[i]->reg_state == NETREG_REGISTERED) + unregister_netdev(adapter->port[i]); + + t4_uld_clean_up(adapter); adap_free_hma_mem(adapter); @@ -7152,10 +7158,6 @@ static void remove_one(struct pci_dev *pdev) cxgb4_free_mps_ref_entries(adapter); - for_each_port(adapter, i) - if (adapter->port[i]->reg_state == NETREG_REGISTERED) - unregister_netdev(adapter->port[i]); - debugfs_remove_recursive(adapter->debugfs_root); if (!is_t4(adapter->params.chip)) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c index 743af9e654aa..17faac715882 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c @@ -581,6 +581,9 @@ void t4_uld_clean_up(struct adapter *adap) { unsigned int i; + if (!is_uld(adap)) + return; + mutex_lock(&uld_mutex); for (i = 0; i < CXGB4_ULD_MAX; i++) { if (!adap->uld[i].handle) -- cgit v1.2.3-58-ga151 From 96248d6da65744e1baaa29e5c4e5dc233e29838b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 8 Jul 2021 10:33:10 -0700 Subject: net: microchip: sparx5: fix kconfig warning PHY_SPARX5_SERDES depends on OF so SPARX5_SWITCH should also depend on OF since 'select' does not follow any dependencies. WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=n] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Randy Dunlap Cc: Lars Povlsen Cc: Steen Hegelund Cc: UNGLinuxDriver@microchip.com Cc: linux-arm-kernel@lists.infradead.org Cc: "David S. Miller" Cc: Jakub Kicinski Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/microchip/sparx5/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/microchip/sparx5/Kconfig b/drivers/net/ethernet/microchip/sparx5/Kconfig index a80419d8d4b5..ac403d43c74c 100644 --- a/drivers/net/ethernet/microchip/sparx5/Kconfig +++ b/drivers/net/ethernet/microchip/sparx5/Kconfig @@ -2,6 +2,7 @@ config SPARX5_SWITCH tristate "Sparx5 switch driver" depends on NET_SWITCHDEV depends on HAS_IOMEM + depends on OF select PHYLINK select PHY_SPARX5_SERDES select RESET_CONTROLLER -- cgit v1.2.3-58-ga151 From 2b452550a203d88112eaf0ba9fc4b750a000b496 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 8 Jul 2021 18:55:32 -0700 Subject: net: bcmgenet: Ensure all TX/RX queues DMAs are disabled Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by: Maxime Ripard Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 35e9956e930c..db74241935ab 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -3238,15 +3238,21 @@ static void bcmgenet_get_hw_addr(struct bcmgenet_priv *priv, /* Returns a reusable dma control register value */ static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv) { + unsigned int i; u32 reg; u32 dma_ctrl; /* disable DMA */ dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN; + for (i = 0; i < priv->hw_params->tx_queues; i++) + dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT)); reg = bcmgenet_tdma_readl(priv, DMA_CTRL); reg &= ~dma_ctrl; bcmgenet_tdma_writel(priv, reg, DMA_CTRL); + dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN; + for (i = 0; i < priv->hw_params->rx_queues; i++) + dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT)); reg = bcmgenet_rdma_readl(priv, DMA_CTRL); reg &= ~dma_ctrl; bcmgenet_rdma_writel(priv, reg, DMA_CTRL); -- cgit v1.2.3-58-ga151 From c78eaeebe855fd93f2e77142ffd0404a54070d84 Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Fri, 9 Jul 2021 17:09:53 +0300 Subject: net: moxa: fix UAF in moxart_mac_probe In case of netdev registration failure the code path will jump to init_fail label: init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); irq_map_fail: free_netdev(ndev); return ret; So, there is no need to call free_netdev() before jumping to error handling path, since it can cause UAF or double-free bug. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller --- drivers/net/ethernet/moxa/moxart_ether.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index 5249b64f4fc5..49def6934cad 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -540,10 +540,8 @@ static int moxart_mac_probe(struct platform_device *pdev) SET_NETDEV_DEV(ndev, &pdev->dev); ret = register_netdev(ndev); - if (ret) { - free_netdev(ndev); + if (ret) goto init_fail; - } netdev_dbg(ndev, "%s: IRQ=%d address=%pM\n", __func__, ndev->irq, ndev->dev_addr); -- cgit v1.2.3-58-ga151 From ad297cd2db8953e2202970e9504cab247b6c7cb4 Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Fri, 9 Jul 2021 17:24:18 +0300 Subject: net: qcom/emac: fix UAF in emac_remove adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 8543bf3c3484..ad655f0a4965 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -735,12 +735,13 @@ static int emac_remove(struct platform_device *pdev) put_device(&adpt->phydev->mdio.dev); mdiobus_unregister(adpt->mii_bus); - free_netdev(netdev); if (adpt->phy.digital) iounmap(adpt->phy.digital); iounmap(adpt->phy.base); + free_netdev(netdev); + return 0; } -- cgit v1.2.3-58-ga151 From 0336f8ffece62f882ab3012820965a786a983f70 Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Fri, 9 Jul 2021 17:58:29 +0300 Subject: net: ti: fix UAF in tlan_remove_one priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/tlan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 0b2ce4bdc2c3..e0cb713193ea 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -313,9 +313,8 @@ static void tlan_remove_one(struct pci_dev *pdev) pci_release_regions(pdev); #endif - free_netdev(dev); - cancel_work_sync(&priv->tlan_tqueue); + free_netdev(dev); } static void tlan_start(struct net_device *dev) -- cgit v1.2.3-58-ga151 From 222722bc6ebfabf5d54467070f05cf9c0a55ea8c Mon Sep 17 00:00:00 2001 From: Yunjian Wang Date: Sat, 10 Jul 2021 11:32:49 +0800 Subject: virtio_net: check virtqueue_add_sgs() return value As virtqueue_add_sgs() can fail, we should check the return value. Addresses-Coverity-ID: 1464439 ("Unchecked return value") Signed-off-by: Yunjian Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b0b81458ca94..13952e2dba5e 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1743,6 +1743,7 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, { struct scatterlist *sgs[4], hdr, stat; unsigned out_num = 0, tmp; + int ret; /* Caller should know better */ BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)); @@ -1762,7 +1763,12 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, sgs[out_num] = &stat; BUG_ON(out_num + 1 > ARRAY_SIZE(sgs)); - virtqueue_add_sgs(vi->cvq, sgs, out_num, 1, vi, GFP_ATOMIC); + ret = virtqueue_add_sgs(vi->cvq, sgs, out_num, 1, vi, GFP_ATOMIC); + if (ret < 0) { + dev_warn(&vi->vdev->dev, + "Failed to add sgs for command vq: %d\n.", ret); + return false; + } if (unlikely(!virtqueue_kick(vi->cvq))) return vi->ctrl->status == VIRTIO_NET_OK; -- cgit v1.2.3-58-ga151 From 84f7e0bb4809f4497124b6b6904c07c8a0c73c58 Mon Sep 17 00:00:00 2001 From: kernel test robot Date: Sun, 11 Jul 2021 18:12:56 +0200 Subject: dsa: fix for_each_child.cocci warnings For_each_available_child_of_node should have of_node_put() before return around line 423. Generated by: scripts/coccinelle/iterators/for_each_child.cocci CC: Alexander Lobakin Reported-by: kernel test robot Signed-off-by: kernel test robot Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index a7e5ac60baef..1542bfb8b5e5 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -419,8 +419,10 @@ int ksz_switch_register(struct ksz_device *dev, if (of_property_read_u32(port, "reg", &port_num)) continue; - if (!(dev->port_mask & BIT(port_num))) + if (!(dev->port_mask & BIT(port_num))) { + of_node_put(port); return -EINVAL; + } of_get_phy_mode(port, &dev->ports[port_num].interface); } -- cgit v1.2.3-58-ga151 From a5de4be0aaaa66a2fa98e8a33bdbed3bd0682804 Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Sun, 11 Jul 2021 18:38:15 +0200 Subject: net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It seems that we cannot differentiate 88X3310 from 88X3340 by simply looking at bit 3 of revision ID. This only works on revisions A0 and A1. On revision B0, this bit is always 1. Instead use the 3.d00d register for differentiation, since this register contains information about number of ports on the device. Fixes: 9885d016ffa9 ("net: phy: marvell10g: add separate structure for 88X3340") Signed-off-by: Marek Behún Reported-by: Matteo Croce Tested-by: Matteo Croce Signed-off-by: David S. Miller --- drivers/net/phy/marvell10g.c | 40 +++++++++++++++++++++++++++++++++++----- include/linux/marvell_phy.h | 6 +----- 2 files changed, 36 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index bbbc6ac8fa82..53a433442803 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -78,6 +78,11 @@ enum { /* Temperature read register (88E2110 only) */ MV_PCS_TEMP = 0x8042, + /* Number of ports on the device */ + MV_PCS_PORT_INFO = 0xd00d, + MV_PCS_PORT_INFO_NPORTS_MASK = 0x0380, + MV_PCS_PORT_INFO_NPORTS_SHIFT = 7, + /* These registers appear at 0x800X and 0xa00X - the 0xa00X control * registers appear to set themselves to the 0x800X when AN is * restarted, but status registers appear readable from either. @@ -966,6 +971,30 @@ static const struct mv3310_chip mv2111_type = { #endif }; +static int mv3310_get_number_of_ports(struct phy_device *phydev) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_PORT_INFO); + if (ret < 0) + return ret; + + ret &= MV_PCS_PORT_INFO_NPORTS_MASK; + ret >>= MV_PCS_PORT_INFO_NPORTS_SHIFT; + + return ret + 1; +} + +static int mv3310_match_phy_device(struct phy_device *phydev) +{ + return mv3310_get_number_of_ports(phydev) == 1; +} + +static int mv3340_match_phy_device(struct phy_device *phydev) +{ + return mv3310_get_number_of_ports(phydev) == 4; +} + static int mv211x_match_phy_device(struct phy_device *phydev, bool has_5g) { int val; @@ -994,7 +1023,8 @@ static int mv2111_match_phy_device(struct phy_device *phydev) static struct phy_driver mv3310_drivers[] = { { .phy_id = MARVELL_PHY_ID_88X3310, - .phy_id_mask = MARVELL_PHY_ID_88X33X0_MASK, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .match_phy_device = mv3310_match_phy_device, .name = "mv88x3310", .driver_data = &mv3310_type, .get_features = mv3310_get_features, @@ -1011,8 +1041,9 @@ static struct phy_driver mv3310_drivers[] = { .set_loopback = genphy_c45_loopback, }, { - .phy_id = MARVELL_PHY_ID_88X3340, - .phy_id_mask = MARVELL_PHY_ID_88X33X0_MASK, + .phy_id = MARVELL_PHY_ID_88X3310, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .match_phy_device = mv3340_match_phy_device, .name = "mv88x3340", .driver_data = &mv3340_type, .get_features = mv3310_get_features, @@ -1069,8 +1100,7 @@ static struct phy_driver mv3310_drivers[] = { module_phy_driver(mv3310_drivers); static struct mdio_device_id __maybe_unused mv3310_tbl[] = { - { MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_88X33X0_MASK }, - { MARVELL_PHY_ID_88X3340, MARVELL_PHY_ID_88X33X0_MASK }, + { MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK }, { }, }; diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h index acee44b9db26..0f06c2287b52 100644 --- a/include/linux/marvell_phy.h +++ b/include/linux/marvell_phy.h @@ -22,14 +22,10 @@ #define MARVELL_PHY_ID_88E1545 0x01410ea0 #define MARVELL_PHY_ID_88E1548P 0x01410ec0 #define MARVELL_PHY_ID_88E3016 0x01410e60 +#define MARVELL_PHY_ID_88X3310 0x002b09a0 #define MARVELL_PHY_ID_88E2110 0x002b09b0 #define MARVELL_PHY_ID_88X2222 0x01410f10 -/* PHY IDs and mask for Alaska 10G PHYs */ -#define MARVELL_PHY_ID_88X33X0_MASK 0xfffffff8 -#define MARVELL_PHY_ID_88X3310 0x002b09a0 -#define MARVELL_PHY_ID_88X3340 0x002b09a8 - /* Marvel 88E1111 in Finisar SFP module with modified PHY ID */ #define MARVELL_PHY_ID_88E1111_FINISAR 0x01ff0cc0 -- cgit v1.2.3-58-ga151 From 1c73daee4bf30ccdff5e86dc400daa6f74735da5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 30 Jun 2021 17:59:59 +0800 Subject: regulator: hi6421: Fix getting wrong drvdata Since config.dev = pdev->dev.parent in current code, so dev_get_drvdata(rdev->dev.parent) call in hi6421_regulator_enable returns the drvdata of the mfd device rather than the regulator. Fix it. This was broken while converting to use simplified DT parsing because the config.dev changed from pdev->dev to pdev->dev.parent for parsing the parent's of_node. Fixes: 29dc269a85ef ("regulator: hi6421: Convert to use simplified DT parsing") Signed-off-by: Axel Lin Link: https://lore.kernel.org/r/20210630095959.2411543-1-axel.lin@ingics.com Signed-off-by: Mark Brown --- drivers/regulator/hi6421-regulator.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c index bff8c515dcde..d144a4bdb76d 100644 --- a/drivers/regulator/hi6421-regulator.c +++ b/drivers/regulator/hi6421-regulator.c @@ -366,9 +366,8 @@ static struct hi6421_regulator_info static int hi6421_regulator_enable(struct regulator_dev *rdev) { - struct hi6421_regulator_pdata *pdata; + struct hi6421_regulator_pdata *pdata = rdev_get_drvdata(rdev); - pdata = dev_get_drvdata(rdev->dev.parent); /* hi6421 spec requires regulator enablement must be serialized: * - Because when BUCK, LDO switching from off to on, it will have * a huge instantaneous current; so you can not turn on two or @@ -385,9 +384,10 @@ static int hi6421_regulator_enable(struct regulator_dev *rdev) static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev) { - struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + struct hi6421_regulator_info *info; unsigned int reg_val; + info = container_of(rdev->desc, struct hi6421_regulator_info, desc); regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val); if (reg_val & info->mode_mask) return REGULATOR_MODE_IDLE; @@ -397,9 +397,10 @@ static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev) static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev) { - struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + struct hi6421_regulator_info *info; unsigned int reg_val; + info = container_of(rdev->desc, struct hi6421_regulator_info, desc); regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val); if (reg_val & info->mode_mask) return REGULATOR_MODE_STANDBY; @@ -410,9 +411,10 @@ static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev) static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) { - struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + struct hi6421_regulator_info *info; unsigned int new_mode; + info = container_of(rdev->desc, struct hi6421_regulator_info, desc); switch (mode) { case REGULATOR_MODE_NORMAL: new_mode = 0; @@ -434,9 +436,10 @@ static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev, static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) { - struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + struct hi6421_regulator_info *info; unsigned int new_mode; + info = container_of(rdev->desc, struct hi6421_regulator_info, desc); switch (mode) { case REGULATOR_MODE_NORMAL: new_mode = 0; @@ -459,7 +462,9 @@ static unsigned int hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev, int input_uV, int output_uV, int load_uA) { - struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + struct hi6421_regulator_info *info; + + info = container_of(rdev->desc, struct hi6421_regulator_info, desc); if (load_uA > info->eco_microamp) return REGULATOR_MODE_NORMAL; @@ -543,14 +548,13 @@ static int hi6421_regulator_probe(struct platform_device *pdev) if (!pdata) return -ENOMEM; mutex_init(&pdata->lock); - platform_set_drvdata(pdev, pdata); for (i = 0; i < ARRAY_SIZE(hi6421_regulator_info); i++) { /* assign per-regulator data */ info = &hi6421_regulator_info[i]; config.dev = pdev->dev.parent; - config.driver_data = info; + config.driver_data = pdata; config.regmap = pmic->regmap; rdev = devm_regulator_register(&pdev->dev, &info->desc, -- cgit v1.2.3-58-ga151 From 69e1818ad27bae167eeaaf6829d4a08900ef5153 Mon Sep 17 00:00:00 2001 From: Dan Sneddon Date: Tue, 29 Jun 2021 12:22:18 -0700 Subject: spi: atmel: Fix CS and initialization bug Commit 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer method") switched to using transfer_one and set_cs. The core doesn't call set_cs when the chip select lines are gpios. Add the SPI_MASTER_GPIO_SS flag to the driver to ensure the calls to set_cs happen since the driver programs configuration registers there. Fixes: 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer method") Signed-off-by: Dan Sneddon Link: https://lore.kernel.org/r/20210629192218.32125-1-dan.sneddon@microchip.com Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 2ef74885ffa2..788dcdf25f00 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -352,8 +352,6 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi) } mr = spi_readl(as, MR); - if (spi->cs_gpiod) - gpiod_set_value(spi->cs_gpiod, 1); } else { u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0; int i; @@ -369,8 +367,6 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi) mr = spi_readl(as, MR); mr = SPI_BFINS(PCS, ~(1 << chip_select), mr); - if (spi->cs_gpiod) - gpiod_set_value(spi->cs_gpiod, 1); spi_writel(as, MR, mr); } @@ -400,8 +396,6 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) if (!spi->cs_gpiod) spi_writel(as, CR, SPI_BIT(LASTXFER)); - else - gpiod_set_value(spi->cs_gpiod, 0); } static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock) @@ -1483,7 +1477,8 @@ static int atmel_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = 4; master->setup = atmel_spi_setup; - master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX); + master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX | + SPI_MASTER_GPIO_SS); master->transfer_one = atmel_spi_one_transfer; master->set_cs = atmel_spi_set_cs; master->cleanup = atmel_spi_cleanup; -- cgit v1.2.3-58-ga151 From 3a70dd2d050331ee4cf5ad9d5c0a32d83ead9a43 Mon Sep 17 00:00:00 2001 From: Peter Hess Date: Tue, 6 Jul 2021 14:16:09 +0200 Subject: spi: mediatek: fix fifo rx mode In FIFO mode were two problems: - RX mode was never handled and - in this case the tx_buf pointer was NULL and caused an exception fix this by handling RX mode in mtk_spi_fifo_transfer Fixes: a568231f4632 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Peter Hess Signed-off-by: Frank Wunderlich Link: https://lore.kernel.org/r/20210706121609.680534-1-linux@fw-web.de Signed-off-by: Mark Brown --- drivers/spi/spi-mt65xx.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 976f73b9e299..8d5fa7f1e506 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -427,13 +427,23 @@ static int mtk_spi_fifo_transfer(struct spi_master *master, mtk_spi_setup_packet(master); cnt = xfer->len / 4; - iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt); + if (xfer->tx_buf) + iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt); + + if (xfer->rx_buf) + ioread32_rep(mdata->base + SPI_RX_DATA_REG, xfer->rx_buf, cnt); remainder = xfer->len % 4; if (remainder > 0) { reg_val = 0; - memcpy(®_val, xfer->tx_buf + (cnt * 4), remainder); - writel(reg_val, mdata->base + SPI_TX_DATA_REG); + if (xfer->tx_buf) { + memcpy(®_val, xfer->tx_buf + (cnt * 4), remainder); + writel(reg_val, mdata->base + SPI_TX_DATA_REG); + } + if (xfer->rx_buf) { + reg_val = readl(mdata->base + SPI_RX_DATA_REG); + memcpy(xfer->rx_buf + (cnt * 4), ®_val, remainder); + } } mtk_spi_enable_transfer(master); -- cgit v1.2.3-58-ga151 From d5c9d0a207f4c61734ccd4b51818788e8b86296a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 12 Jul 2021 00:44:53 -0500 Subject: mt76: mt7921: Fix fall-through warning for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warning by explicitly adding a break statement: drivers/net/wireless/mediatek/mt76/mt7921/main.c:392:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva --- drivers/net/wireless/mediatek/mt76/mt7921/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c index 7fd21049ff5a..63ec140c9c37 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c @@ -389,6 +389,7 @@ static int mt7921_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, case WLAN_CIPHER_SUITE_WEP104: if (!mvif->wep_sta) return -EOPNOTSUPP; + break; case WLAN_CIPHER_SUITE_TKIP: case WLAN_CIPHER_SUITE_CCMP: case WLAN_CIPHER_SUITE_CCMP_256: -- cgit v1.2.3-58-ga151 From 4020f26b368c3e72450afedaefc2fd07ba301d20 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 12 Jul 2021 00:47:57 -0500 Subject: nfp: flower-ct: Fix fall-through warning for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warning by explicitly adding a break statement: drivers/net/ethernet/netronome/nfp/flower/conntrack.c:1175:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva --- drivers/net/ethernet/netronome/nfp/flower/conntrack.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/flower/conntrack.c b/drivers/net/ethernet/netronome/nfp/flower/conntrack.c index 273d529d43c2..684bb3efe0cf 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/conntrack.c +++ b/drivers/net/ethernet/netronome/nfp/flower/conntrack.c @@ -1172,6 +1172,7 @@ int nfp_fl_ct_del_flow(struct nfp_fl_ct_map_entry *ct_map_ent) nfp_ct_map_params); nfp_fl_ct_clean_flow_entry(ct_map_ent->ct_entry); kfree(ct_map_ent); + break; default: break; } -- cgit v1.2.3-58-ga151 From 81eb1d17115fba5ea67a4939a136888a7ec05c32 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 12 Jul 2021 00:51:03 -0500 Subject: drm/i915: Fix fall-through warning for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a return; statement: drivers/gpu/drm/i915/gem/i915_gem_shrinker.c:65:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva --- drivers/gpu/drm/i915/gem/i915_gem_shrinker.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c b/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c index f4fb68e8955a..e382b7f2353b 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c @@ -62,6 +62,7 @@ static void try_to_writeback(struct drm_i915_gem_object *obj, switch (obj->mm.madv) { case I915_MADV_DONTNEED: i915_gem_object_truncate(obj); + return; case __I915_MADV_PURGED: return; } -- cgit v1.2.3-58-ga151 From 94b619a07655805a1622484967754f5848640456 Mon Sep 17 00:00:00 2001 From: Marco De Marco Date: Mon, 5 Jul 2021 19:44:21 +0000 Subject: USB: serial: option: add support for u-blox LARA-R6 family The patch is meant to support LARA-R6 Cat 1 module family. Module USB ID: Vendor ID: 0x05c6 Product ID: 0x90fA Interface layout: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: QMI wwan (not available in all versions) Signed-off-by: Marco De Marco Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7608584ef4fe..0fbe253dc570 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -238,6 +238,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_UC15 0x9090 /* These u-blox products use Qualcomm's vendor ID */ #define UBLOX_PRODUCT_R410M 0x90b2 +#define UBLOX_PRODUCT_R6XX 0x90fa /* These Yuga products use Qualcomm's vendor ID */ #define YUGA_PRODUCT_CLM920_NC5 0x9625 @@ -1101,6 +1102,8 @@ static const struct usb_device_id option_ids[] = { /* u-blox products using Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M), .driver_info = RSVD(1) | RSVD(3) }, + { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX), + .driver_info = RSVD(3) }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, -- cgit v1.2.3-58-ga151 From 2fa9fd69b3ee015a873e44f7c645ad7bcb79d290 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Sat, 26 Jun 2021 09:13:35 +0100 Subject: clk: renesas: rzg2l: Add multi clock PM support Add multi clock PM support for cpg driver. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210626081344.5783-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/renesas-rzg2l-cpg.c | 51 +++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.c b/drivers/clk/renesas/renesas-rzg2l-cpg.c index 5009b9e48b13..1941f13bd922 100644 --- a/drivers/clk/renesas/renesas-rzg2l-cpg.c +++ b/drivers/clk/renesas/renesas-rzg2l-cpg.c @@ -594,42 +594,49 @@ static int rzg2l_cpg_attach_dev(struct generic_pm_domain *unused, struct device { struct device_node *np = dev->of_node; struct of_phandle_args clkspec; + bool once = true; struct clk *clk; int error; int i = 0; while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i, &clkspec)) { - if (rzg2l_cpg_is_pm_clk(&clkspec)) - goto found; - - of_node_put(clkspec.np); + if (rzg2l_cpg_is_pm_clk(&clkspec)) { + if (once) { + once = false; + error = pm_clk_create(dev); + if (error) { + of_node_put(clkspec.np); + goto err; + } + } + clk = of_clk_get_from_provider(&clkspec); + of_node_put(clkspec.np); + if (IS_ERR(clk)) { + error = PTR_ERR(clk); + goto fail_destroy; + } + + error = pm_clk_add_clk(dev, clk); + if (error) { + dev_err(dev, "pm_clk_add_clk failed %d\n", + error); + goto fail_put; + } + } else { + of_node_put(clkspec.np); + } i++; } return 0; -found: - clk = of_clk_get_from_provider(&clkspec); - of_node_put(clkspec.np); - - if (IS_ERR(clk)) - return PTR_ERR(clk); - - error = pm_clk_create(dev); - if (error) - goto fail_put; - - error = pm_clk_add_clk(dev, clk); - if (error) - goto fail_destroy; - - return 0; +fail_put: + clk_put(clk); fail_destroy: pm_clk_destroy(dev); -fail_put: - clk_put(clk); +err: return error; } -- cgit v1.2.3-58-ga151 From e93c1373613fb2f3e59db5f13271f155820e6a67 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Sat, 26 Jun 2021 09:13:36 +0100 Subject: clk: renesas: r9a07g044: Rename divider table As per RZ/G2L HW Manual (Rev.0.50), CPG_PL3A_DDIV,CPG_PL3B_DDIV and CPG_PL2_DDIV(for P0) shares same divider table entries. Rename clk_div_table dtable_3b to clk_div_table dtable_1_32 so that it can be reused. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210626081344.5783-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r9a07g044-cpg.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c index 50b5269586a4..d5803fb1242e 100644 --- a/drivers/clk/renesas/r9a07g044-cpg.c +++ b/drivers/clk/renesas/r9a07g044-cpg.c @@ -42,12 +42,13 @@ enum clk_ids { }; /* Divider tables */ -static const struct clk_div_table dtable_3b[] = { +static const struct clk_div_table dtable_1_32[] = { {0, 1}, {1, 2}, {2, 4}, {3, 8}, {4, 32}, + {0, 0}, }; static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = { @@ -72,10 +73,10 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = { /* Core output clk */ DEF_FIXED("I", R9A07G044_CLK_I, CLK_PLL1, 1, 1), DEF_DIV("P0", R9A07G044_CLK_P0, CLK_PLL2_DIV16, DIVPL2A, - dtable_3b, CLK_DIVIDER_HIWORD_MASK), + dtable_1_32, CLK_DIVIDER_HIWORD_MASK), DEF_FIXED("TSU", R9A07G044_CLK_TSU, CLK_PLL2_DIV20, 1, 1), DEF_DIV("P1", R9A07G044_CLK_P1, CLK_PLL3_DIV8, - DIVPL3B, dtable_3b, CLK_DIVIDER_HIWORD_MASK), + DIVPL3B, dtable_1_32, CLK_DIVIDER_HIWORD_MASK), }; static struct rzg2l_mod_clk r9a07g044_mod_clks[] = { -- cgit v1.2.3-58-ga151 From fd8c3f6c36eb093039d4aeb20cceee00c7c6ba1a Mon Sep 17 00:00:00 2001 From: Biju Das Date: Sat, 26 Jun 2021 09:13:37 +0100 Subject: clk: renesas: r9a07g044: Fix P1 Clock As per RZ/G2L HW Manual(Rev.0.50) P1 is sourced from pll3_div2_4. So fix the clock definitions for P1. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210626081344.5783-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r9a07g044-cpg.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c index d5803fb1242e..d895c1cef1fa 100644 --- a/drivers/clk/renesas/r9a07g044-cpg.c +++ b/drivers/clk/renesas/r9a07g044-cpg.c @@ -30,8 +30,8 @@ enum clk_ids { CLK_PLL2_DIV20, CLK_PLL3, CLK_PLL3_DIV2, + CLK_PLL3_DIV2_4, CLK_PLL3_DIV4, - CLK_PLL3_DIV8, CLK_PLL4, CLK_PLL5, CLK_PLL5_DIV2, @@ -67,15 +67,15 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = { DEF_FIXED(".pll2_div20", CLK_PLL2_DIV20, CLK_PLL2, 1, 20), DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2), + DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4), DEF_FIXED(".pll3_div4", CLK_PLL3_DIV4, CLK_PLL3, 1, 4), - DEF_FIXED(".pll3_div8", CLK_PLL3_DIV8, CLK_PLL3, 1, 8), /* Core output clk */ DEF_FIXED("I", R9A07G044_CLK_I, CLK_PLL1, 1, 1), DEF_DIV("P0", R9A07G044_CLK_P0, CLK_PLL2_DIV16, DIVPL2A, dtable_1_32, CLK_DIVIDER_HIWORD_MASK), DEF_FIXED("TSU", R9A07G044_CLK_TSU, CLK_PLL2_DIV20, 1, 1), - DEF_DIV("P1", R9A07G044_CLK_P1, CLK_PLL3_DIV8, + DEF_DIV("P1", R9A07G044_CLK_P1, CLK_PLL3_DIV2_4, DIVPL3B, dtable_1_32, CLK_DIVIDER_HIWORD_MASK), }; -- cgit v1.2.3-58-ga151 From 668756f7299d2d3c75add17cb415717e247450ef Mon Sep 17 00:00:00 2001 From: Biju Das Date: Sat, 26 Jun 2021 09:13:38 +0100 Subject: clk: renesas: r9a07g044: Add P2 Clock support Add support for P2 clock which is sourced from pll3_div2_4_2. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210626081344.5783-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r9a07g044-cpg.c | 4 ++++ drivers/clk/renesas/renesas-rzg2l-cpg.h | 1 + 2 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c index d895c1cef1fa..70df4feda417 100644 --- a/drivers/clk/renesas/r9a07g044-cpg.c +++ b/drivers/clk/renesas/r9a07g044-cpg.c @@ -31,6 +31,7 @@ enum clk_ids { CLK_PLL3, CLK_PLL3_DIV2, CLK_PLL3_DIV2_4, + CLK_PLL3_DIV2_4_2, CLK_PLL3_DIV4, CLK_PLL4, CLK_PLL5, @@ -68,6 +69,7 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = { DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2), DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4), + DEF_FIXED(".pll3_div2_4_2", CLK_PLL3_DIV2_4_2, CLK_PLL3_DIV2_4, 1, 2), DEF_FIXED(".pll3_div4", CLK_PLL3_DIV4, CLK_PLL3, 1, 4), /* Core output clk */ @@ -77,6 +79,8 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = { DEF_FIXED("TSU", R9A07G044_CLK_TSU, CLK_PLL2_DIV20, 1, 1), DEF_DIV("P1", R9A07G044_CLK_P1, CLK_PLL3_DIV2_4, DIVPL3B, dtable_1_32, CLK_DIVIDER_HIWORD_MASK), + DEF_DIV("P2", R9A07G044_CLK_P2, CLK_PLL3_DIV2_4_2, + DIVPL3A, dtable_1_32, CLK_DIVIDER_HIWORD_MASK), }; static struct rzg2l_mod_clk r9a07g044_mod_clks[] = { diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.h b/drivers/clk/renesas/renesas-rzg2l-cpg.h index 3948bdd8afc9..a6a3bade1985 100644 --- a/drivers/clk/renesas/renesas-rzg2l-cpg.h +++ b/drivers/clk/renesas/renesas-rzg2l-cpg.h @@ -21,6 +21,7 @@ #define DDIV_PACK(offset, bitpos, size) \ (((offset) << 20) | ((bitpos) << 12) | ((size) << 8)) #define DIVPL2A DDIV_PACK(CPG_PL2_DDIV, 0, 3) +#define DIVPL3A DDIV_PACK(CPG_PL3A_DDIV, 0, 3) #define DIVPL3B DDIV_PACK(CPG_PL3A_DDIV, 4, 3) /** -- cgit v1.2.3-58-ga151 From c3e67ad6f5a2c698a055fb297c6f9962f5145edd Mon Sep 17 00:00:00 2001 From: Biju Das Date: Sat, 26 Jun 2021 09:13:39 +0100 Subject: dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions Update clock and reset definitions as per RZ/G2L_clock_list_r02_02.xlsx and RZ/G2L HW(Rev.0.50) manual. Update {GIC,IA55,SCIF} clock and reset entries in the CPG driver, and separate reset from module clocks in order to handle them efficiently. Update the SCIF0 clock and reset index in the SoC DTSI. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210626081344.5783-6-biju.das.jz@bp.renesas.com Link: https://lore.kernel.org/r/20210626081344.5783-7-biju.das.jz@bp.renesas.com Link: https://lore.kernel.org/r/20210626081344.5783-8-biju.das.jz@bp.renesas.com [geert: Squashed 3 commits] Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 4 +- drivers/clk/renesas/r9a07g044-cpg.c | 62 ++++---- drivers/clk/renesas/renesas-rzg2l-cpg.c | 59 ++++---- drivers/clk/renesas/renesas-rzg2l-cpg.h | 36 +++-- include/dt-bindings/clock/r9a07g044-cpg.h | 236 ++++++++++++++++++++++------- 5 files changed, 278 insertions(+), 119 deletions(-) (limited to 'drivers') diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 734c8adeceba..01482d227506 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -82,10 +82,10 @@ ; interrupt-names = "eri", "rxi", "txi", "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>; + clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>; clock-names = "fck"; power-domains = <&cpg>; - resets = <&cpg R9A07G044_CLK_SCIF0>; + resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>; status = "disabled"; }; diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c index 70df4feda417..ae24e0397d3c 100644 --- a/drivers/clk/renesas/r9a07g044-cpg.c +++ b/drivers/clk/renesas/r9a07g044-cpg.c @@ -84,34 +84,40 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = { }; static struct rzg2l_mod_clk r9a07g044_mod_clks[] = { - DEF_MOD("gic", R9A07G044_CLK_GIC600, - R9A07G044_CLK_P1, - 0x514, BIT(0), (BIT(0) | BIT(1))), - DEF_MOD("ia55", R9A07G044_CLK_IA55, - R9A07G044_CLK_P1, - 0x518, (BIT(0) | BIT(1)), BIT(0)), - DEF_MOD("scif0", R9A07G044_CLK_SCIF0, - R9A07G044_CLK_P0, - 0x584, BIT(0), BIT(0)), - DEF_MOD("scif1", R9A07G044_CLK_SCIF1, - R9A07G044_CLK_P0, - 0x584, BIT(1), BIT(1)), - DEF_MOD("scif2", R9A07G044_CLK_SCIF2, - R9A07G044_CLK_P0, - 0x584, BIT(2), BIT(2)), - DEF_MOD("scif3", R9A07G044_CLK_SCIF3, - R9A07G044_CLK_P0, - 0x584, BIT(3), BIT(3)), - DEF_MOD("scif4", R9A07G044_CLK_SCIF4, - R9A07G044_CLK_P0, - 0x584, BIT(4), BIT(4)), - DEF_MOD("sci0", R9A07G044_CLK_SCI0, - R9A07G044_CLK_P0, - 0x588, BIT(0), BIT(0)), + DEF_MOD("gic", R9A07G044_GIC600_GICCLK, R9A07G044_CLK_P1, + 0x514, 0), + DEF_MOD("ia55_pclk", R9A07G044_IA55_PCLK, R9A07G044_CLK_P2, + 0x518, 0), + DEF_MOD("ia55_clk", R9A07G044_IA55_CLK, R9A07G044_CLK_P1, + 0x518, 1), + DEF_MOD("scif0", R9A07G044_SCIF0_CLK_PCK, R9A07G044_CLK_P0, + 0x584, 0), + DEF_MOD("scif1", R9A07G044_SCIF1_CLK_PCK, R9A07G044_CLK_P0, + 0x584, 1), + DEF_MOD("scif2", R9A07G044_SCIF2_CLK_PCK, R9A07G044_CLK_P0, + 0x584, 2), + DEF_MOD("scif3", R9A07G044_SCIF3_CLK_PCK, R9A07G044_CLK_P0, + 0x584, 3), + DEF_MOD("scif4", R9A07G044_SCIF4_CLK_PCK, R9A07G044_CLK_P0, + 0x584, 4), + DEF_MOD("sci0", R9A07G044_SCI0_CLKP, R9A07G044_CLK_P0, + 0x588, 0), +}; + +static struct rzg2l_reset r9a07g044_resets[] = { + DEF_RST(R9A07G044_GIC600_GICRESET_N, 0x814, 0), + DEF_RST(R9A07G044_GIC600_DBG_GICRESET_N, 0x814, 1), + DEF_RST(R9A07G044_IA55_RESETN, 0x818, 0), + DEF_RST(R9A07G044_SCIF0_RST_SYSTEM_N, 0x884, 0), + DEF_RST(R9A07G044_SCIF1_RST_SYSTEM_N, 0x884, 1), + DEF_RST(R9A07G044_SCIF2_RST_SYSTEM_N, 0x884, 2), + DEF_RST(R9A07G044_SCIF3_RST_SYSTEM_N, 0x884, 3), + DEF_RST(R9A07G044_SCIF4_RST_SYSTEM_N, 0x884, 4), + DEF_RST(R9A07G044_SCI0_RST, 0x888, 0), }; static const unsigned int r9a07g044_crit_mod_clks[] __initconst = { - MOD_CLK_BASE + R9A07G044_CLK_GIC600, + MOD_CLK_BASE + R9A07G044_GIC600_GICCLK, }; const struct rzg2l_cpg_info r9a07g044_cpg_info = { @@ -128,5 +134,9 @@ const struct rzg2l_cpg_info r9a07g044_cpg_info = { /* Module Clocks */ .mod_clks = r9a07g044_mod_clks, .num_mod_clks = ARRAY_SIZE(r9a07g044_mod_clks), - .num_hw_mod_clks = R9A07G044_CLK_MIPI_DSI_PIN + 1, + .num_hw_mod_clks = R9A07G044_TSU_PCLK + 1, + + /* Resets */ + .resets = r9a07g044_resets, + .num_resets = ARRAY_SIZE(r9a07g044_resets), }; diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.c b/drivers/clk/renesas/renesas-rzg2l-cpg.c index 1941f13bd922..e7c59af2a1d8 100644 --- a/drivers/clk/renesas/renesas-rzg2l-cpg.c +++ b/drivers/clk/renesas/renesas-rzg2l-cpg.c @@ -47,9 +47,9 @@ #define SDIV(val) DIV_RSMASK(val, 0, 0x7) #define CLK_ON_R(reg) (reg) -#define CLK_MON_R(reg) (0x680 - 0x500 + (reg)) -#define CLK_RST_R(reg) (0x800 - 0x500 + (reg)) -#define CLK_MRST_R(reg) (0x980 - 0x500 + (reg)) +#define CLK_MON_R(reg) (0x180 + (reg)) +#define CLK_RST_R(reg) (reg) +#define CLK_MRST_R(reg) (0x180 + (reg)) #define GET_REG_OFFSET(val) ((val >> 20) & 0xfff) #define GET_REG_SAMPLL_CLK1(val) ((val >> 22) & 0xfff) @@ -78,6 +78,7 @@ struct rzg2l_cpg_priv { struct clk **clks; unsigned int num_core_clks; unsigned int num_mod_clks; + unsigned int num_resets; unsigned int last_dt_core_clk; struct raw_notifier_head notifiers; @@ -315,15 +316,13 @@ fail: * * @hw: handle between common and hardware-specific interfaces * @off: register offset - * @onoff: ON/MON bits - * @reset: reset bits + * @bit: ON/MON bit * @priv: CPG/MSTP private data */ struct mstp_clock { struct clk_hw hw; u16 off; - u8 onoff; - u8 reset; + u8 bit; struct rzg2l_cpg_priv *priv; }; @@ -337,6 +336,7 @@ static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable) struct device *dev = priv->dev; unsigned long flags; unsigned int i; + u32 bitmask = BIT(clock->bit); u32 value; if (!clock->off) { @@ -349,9 +349,9 @@ static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable) spin_lock_irqsave(&priv->rmw_lock, flags); if (enable) - value = (clock->onoff << 16) | clock->onoff; + value = (bitmask << 16) | bitmask; else - value = clock->onoff << 16; + value = bitmask << 16; writel(value, priv->base + CLK_ON_R(reg)); spin_unlock_irqrestore(&priv->rmw_lock, flags); @@ -360,7 +360,7 @@ static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable) return 0; for (i = 1000; i > 0; --i) { - if (((readl(priv->base + CLK_MON_R(reg))) & clock->onoff)) + if (((readl(priv->base + CLK_MON_R(reg))) & bitmask)) break; cpu_relax(); } @@ -388,6 +388,7 @@ static int rzg2l_mod_clock_is_enabled(struct clk_hw *hw) { struct mstp_clock *clock = to_mod_clock(hw); struct rzg2l_cpg_priv *priv = clock->priv; + u32 bitmask = BIT(clock->bit); u32 value; if (!clock->off) { @@ -397,7 +398,7 @@ static int rzg2l_mod_clock_is_enabled(struct clk_hw *hw) value = readl(priv->base + CLK_MON_R(clock->off)); - return !(value & clock->onoff); + return !(value & bitmask); } static const struct clk_ops rzg2l_mod_clock_ops = { @@ -457,8 +458,7 @@ rzg2l_cpg_register_mod_clk(const struct rzg2l_mod_clk *mod, init.num_parents = 1; clock->off = mod->off; - clock->onoff = mod->onoff; - clock->reset = mod->reset; + clock->bit = mod->bit; clock->priv = priv; clock->hw.init = &init; @@ -483,12 +483,11 @@ static int rzg2l_cpg_reset(struct reset_controller_dev *rcdev, { struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev); const struct rzg2l_cpg_info *info = priv->info; - unsigned int reg = info->mod_clks[id].off; - u32 dis = info->mod_clks[id].reset; + unsigned int reg = info->resets[id].off; + u32 dis = BIT(info->resets[id].bit); u32 we = dis << 16; - dev_dbg(rcdev->dev, "reset name:%s id:%ld offset:0x%x\n", - info->mod_clks[id].name, id, CLK_RST_R(reg)); + dev_dbg(rcdev->dev, "reset id:%ld offset:0x%x\n", id, CLK_RST_R(reg)); /* Reset module */ writel(we, priv->base + CLK_RST_R(reg)); @@ -507,11 +506,10 @@ static int rzg2l_cpg_assert(struct reset_controller_dev *rcdev, { struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev); const struct rzg2l_cpg_info *info = priv->info; - unsigned int reg = info->mod_clks[id].off; - u32 value = info->mod_clks[id].reset << 16; + unsigned int reg = info->resets[id].off; + u32 value = BIT(info->resets[id].bit) << 16; - dev_dbg(rcdev->dev, "assert name:%s id:%ld offset:0x%x\n", - info->mod_clks[id].name, id, CLK_RST_R(reg)); + dev_dbg(rcdev->dev, "assert id:%ld offset:0x%x\n", id, CLK_RST_R(reg)); writel(value, priv->base + CLK_RST_R(reg)); return 0; @@ -522,12 +520,12 @@ static int rzg2l_cpg_deassert(struct reset_controller_dev *rcdev, { struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev); const struct rzg2l_cpg_info *info = priv->info; - unsigned int reg = info->mod_clks[id].off; - u32 dis = info->mod_clks[id].reset; + unsigned int reg = info->resets[id].off; + u32 dis = BIT(info->resets[id].bit); u32 value = (dis << 16) | dis; - dev_dbg(rcdev->dev, "deassert name:%s id:%ld offset:0x%x\n", - info->mod_clks[id].name, id, CLK_RST_R(reg)); + dev_dbg(rcdev->dev, "deassert id:%ld offset:0x%x\n", id, + CLK_RST_R(reg)); writel(value, priv->base + CLK_RST_R(reg)); return 0; @@ -538,8 +536,8 @@ static int rzg2l_cpg_status(struct reset_controller_dev *rcdev, { struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev); const struct rzg2l_cpg_info *info = priv->info; - unsigned int reg = info->mod_clks[id].off; - u32 bitmask = info->mod_clks[id].reset; + unsigned int reg = info->resets[id].off; + u32 bitmask = BIT(info->resets[id].bit); return !(readl(priv->base + CLK_MRST_R(reg)) & bitmask); } @@ -554,9 +552,11 @@ static const struct reset_control_ops rzg2l_cpg_reset_ops = { static int rzg2l_cpg_reset_xlate(struct reset_controller_dev *rcdev, const struct of_phandle_args *reset_spec) { + struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev); + const struct rzg2l_cpg_info *info = priv->info; unsigned int id = reset_spec->args[0]; - if (id >= rcdev->nr_resets) { + if (id >= rcdev->nr_resets || !info->resets[id].off) { dev_err(rcdev->dev, "Invalid reset index %u\n", id); return -EINVAL; } @@ -571,7 +571,7 @@ static int rzg2l_cpg_reset_controller_register(struct rzg2l_cpg_priv *priv) priv->rcdev.dev = priv->dev; priv->rcdev.of_reset_n_cells = 1; priv->rcdev.of_xlate = rzg2l_cpg_reset_xlate; - priv->rcdev.nr_resets = priv->num_mod_clks; + priv->rcdev.nr_resets = priv->num_resets; return devm_reset_controller_register(priv->dev, &priv->rcdev); } @@ -699,6 +699,7 @@ static int __init rzg2l_cpg_probe(struct platform_device *pdev) priv->clks = clks; priv->num_core_clks = info->num_total_core_clks; priv->num_mod_clks = info->num_hw_mod_clks; + priv->num_resets = info->num_resets; priv->last_dt_core_clk = info->last_dt_core_clk; for (i = 0; i < nclks; i++) diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.h b/drivers/clk/renesas/renesas-rzg2l-cpg.h index a6a3bade1985..63695280ce8b 100644 --- a/drivers/clk/renesas/renesas-rzg2l-cpg.h +++ b/drivers/clk/renesas/renesas-rzg2l-cpg.h @@ -77,26 +77,40 @@ enum clk_types { * @id: clock index in array containing all Core and Module Clocks * @parent: id of parent clock * @off: register offset - * @onoff: ON/MON bits - * @reset: reset bits + * @bit: ON/MON bit */ struct rzg2l_mod_clk { const char *name; unsigned int id; unsigned int parent; u16 off; - u8 onoff; - u8 reset; + u8 bit; }; -#define DEF_MOD(_name, _id, _parent, _off, _onoff, _reset) \ - [_id] = { \ +#define DEF_MOD(_name, _id, _parent, _off, _bit) \ + { \ .name = _name, \ - .id = MOD_CLK_BASE + _id, \ + .id = MOD_CLK_BASE + (_id), \ .parent = (_parent), \ .off = (_off), \ - .onoff = (_onoff), \ - .reset = (_reset) \ + .bit = (_bit), \ + } + +/** + * struct rzg2l_reset - Reset definitions + * + * @off: register offset + * @bit: reset bit + */ +struct rzg2l_reset { + u16 off; + u8 bit; +}; + +#define DEF_RST(_id, _off, _bit) \ + [_id] = { \ + .off = (_off), \ + .bit = (_bit) \ } /** @@ -127,6 +141,10 @@ struct rzg2l_cpg_info { unsigned int num_mod_clks; unsigned int num_hw_mod_clks; + /* Resets */ + const struct rzg2l_reset *resets; + unsigned int num_resets; + /* Critical Module Clocks that should not be disabled */ const unsigned int *crit_mod_clks; unsigned int num_crit_mod_clks; diff --git a/include/dt-bindings/clock/r9a07g044-cpg.h b/include/dt-bindings/clock/r9a07g044-cpg.h index 1d8986563fc5..0728ad07ff7a 100644 --- a/include/dt-bindings/clock/r9a07g044-cpg.h +++ b/include/dt-bindings/clock/r9a07g044-cpg.h @@ -32,58 +32,188 @@ #define R9A07G044_OSCCLK 21 /* R9A07G044 Module Clocks */ -#define R9A07G044_CLK_GIC600 0 -#define R9A07G044_CLK_IA55 1 -#define R9A07G044_CLK_SYC 2 -#define R9A07G044_CLK_DMAC 3 -#define R9A07G044_CLK_SYSC 4 -#define R9A07G044_CLK_MTU 5 -#define R9A07G044_CLK_GPT 6 -#define R9A07G044_CLK_ETH0 7 -#define R9A07G044_CLK_ETH1 8 -#define R9A07G044_CLK_I2C0 9 -#define R9A07G044_CLK_I2C1 10 -#define R9A07G044_CLK_I2C2 11 -#define R9A07G044_CLK_I2C3 12 -#define R9A07G044_CLK_SCIF0 13 -#define R9A07G044_CLK_SCIF1 14 -#define R9A07G044_CLK_SCIF2 15 -#define R9A07G044_CLK_SCIF3 16 -#define R9A07G044_CLK_SCIF4 17 -#define R9A07G044_CLK_SCI0 18 -#define R9A07G044_CLK_SCI1 19 -#define R9A07G044_CLK_GPIO 20 -#define R9A07G044_CLK_SDHI0 21 -#define R9A07G044_CLK_SDHI1 22 -#define R9A07G044_CLK_USB0 23 -#define R9A07G044_CLK_USB1 24 -#define R9A07G044_CLK_CANFD 25 -#define R9A07G044_CLK_SSI0 26 -#define R9A07G044_CLK_SSI1 27 -#define R9A07G044_CLK_SSI2 28 -#define R9A07G044_CLK_SSI3 29 -#define R9A07G044_CLK_MHU 30 -#define R9A07G044_CLK_OSTM0 31 -#define R9A07G044_CLK_OSTM1 32 -#define R9A07G044_CLK_OSTM2 33 -#define R9A07G044_CLK_WDT0 34 -#define R9A07G044_CLK_WDT1 35 -#define R9A07G044_CLK_WDT2 36 -#define R9A07G044_CLK_WDT_PON 37 -#define R9A07G044_CLK_GPU 38 -#define R9A07G044_CLK_ISU 39 -#define R9A07G044_CLK_H264 40 -#define R9A07G044_CLK_CRU 41 -#define R9A07G044_CLK_MIPI_DSI 42 -#define R9A07G044_CLK_LCDC 43 -#define R9A07G044_CLK_SRC 44 -#define R9A07G044_CLK_RSPI0 45 -#define R9A07G044_CLK_RSPI1 46 -#define R9A07G044_CLK_RSPI2 47 -#define R9A07G044_CLK_ADC 48 -#define R9A07G044_CLK_TSU_PCLK 49 -#define R9A07G044_CLK_SPI 50 -#define R9A07G044_CLK_MIPI_DSI_V 51 -#define R9A07G044_CLK_MIPI_DSI_PIN 52 +#define R9A07G044_CA55_SCLK 0 +#define R9A07G044_CA55_PCLK 1 +#define R9A07G044_CA55_ATCLK 2 +#define R9A07G044_CA55_GICCLK 3 +#define R9A07G044_CA55_PERICLK 4 +#define R9A07G044_CA55_ACLK 5 +#define R9A07G044_CA55_TSCLK 6 +#define R9A07G044_GIC600_GICCLK 7 +#define R9A07G044_IA55_CLK 8 +#define R9A07G044_IA55_PCLK 9 +#define R9A07G044_MHU_PCLK 10 +#define R9A07G044_SYC_CNT_CLK 11 +#define R9A07G044_DMAC_ACLK 12 +#define R9A07G044_DMAC_PCLK 13 +#define R9A07G044_OSTM0_PCLK 14 +#define R9A07G044_OSTM1_PCLK 15 +#define R9A07G044_OSTM2_PCLK 16 +#define R9A07G044_MTU_X_MCK_MTU3 17 +#define R9A07G044_POE3_CLKM_POE 18 +#define R9A07G044_GPT_PCLK 19 +#define R9A07G044_POEG_A_CLKP 20 +#define R9A07G044_POEG_B_CLKP 21 +#define R9A07G044_POEG_C_CLKP 22 +#define R9A07G044_POEG_D_CLKP 23 +#define R9A07G044_WDT0_PCLK 24 +#define R9A07G044_WDT0_CLK 25 +#define R9A07G044_WDT1_PCLK 26 +#define R9A07G044_WDT1_CLK 27 +#define R9A07G044_WDT2_PCLK 28 +#define R9A07G044_WDT2_CLK 29 +#define R9A07G044_SPI_CLK2 30 +#define R9A07G044_SPI_CLK 31 +#define R9A07G044_SDHI0_IMCLK 32 +#define R9A07G044_SDHI0_IMCLK2 33 +#define R9A07G044_SDHI0_CLK_HS 34 +#define R9A07G044_SDHI0_ACLK 35 +#define R9A07G044_SDHI1_IMCLK 36 +#define R9A07G044_SDHI1_IMCLK2 37 +#define R9A07G044_SDHI1_CLK_HS 38 +#define R9A07G044_SDHI1_ACLK 39 +#define R9A07G044_GPU_CLK 40 +#define R9A07G044_GPU_AXI_CLK 41 +#define R9A07G044_GPU_ACE_CLK 42 +#define R9A07G044_ISU_ACLK 43 +#define R9A07G044_ISU_PCLK 44 +#define R9A07G044_H264_CLK_A 45 +#define R9A07G044_H264_CLK_P 46 +#define R9A07G044_CRU_SYSCLK 47 +#define R9A07G044_CRU_VCLK 48 +#define R9A07G044_CRU_PCLK 49 +#define R9A07G044_CRU_ACLK 50 +#define R9A07G044_MIPI_DSI_PLLCLK 51 +#define R9A07G044_MIPI_DSI_SYSCLK 52 +#define R9A07G044_MIPI_DSI_ACLK 53 +#define R9A07G044_MIPI_DSI_PCLK 54 +#define R9A07G044_MIPI_DSI_VCLK 55 +#define R9A07G044_MIPI_DSI_LPCLK 56 +#define R9A07G044_LCDC_CLK_A 57 +#define R9A07G044_LCDC_CLK_P 58 +#define R9A07G044_LCDC_CLK_D 59 +#define R9A07G044_SSI0_PCLK2 60 +#define R9A07G044_SSI0_PCLK_SFR 61 +#define R9A07G044_SSI1_PCLK2 62 +#define R9A07G044_SSI1_PCLK_SFR 63 +#define R9A07G044_SSI2_PCLK2 64 +#define R9A07G044_SSI2_PCLK_SFR 65 +#define R9A07G044_SSI3_PCLK2 66 +#define R9A07G044_SSI3_PCLK_SFR 67 +#define R9A07G044_SRC_CLKP 68 +#define R9A07G044_USB_U2H0_HCLK 69 +#define R9A07G044_USB_U2H1_HCLK 70 +#define R9A07G044_USB_U2P_EXR_CPUCLK 71 +#define R9A07G044_USB_PCLK 72 +#define R9A07G044_ETH0_CLK_AXI 73 +#define R9A07G044_ETH0_CLK_CHI 74 +#define R9A07G044_ETH1_CLK_AXI 75 +#define R9A07G044_ETH1_CLK_CHI 76 +#define R9A07G044_I2C0_PCLK 77 +#define R9A07G044_I2C1_PCLK 78 +#define R9A07G044_I2C2_PCLK 79 +#define R9A07G044_I2C3_PCLK 80 +#define R9A07G044_SCIF0_CLK_PCK 81 +#define R9A07G044_SCIF1_CLK_PCK 82 +#define R9A07G044_SCIF2_CLK_PCK 83 +#define R9A07G044_SCIF3_CLK_PCK 84 +#define R9A07G044_SCIF4_CLK_PCK 85 +#define R9A07G044_SCI0_CLKP 86 +#define R9A07G044_SCI1_CLKP 87 +#define R9A07G044_IRDA_CLKP 88 +#define R9A07G044_RSPI0_CLKB 89 +#define R9A07G044_RSPI1_CLKB 90 +#define R9A07G044_RSPI2_CLKB 91 +#define R9A07G044_CANFD_PCLK 92 +#define R9A07G044_GPIO_HCLK 93 +#define R9A07G044_ADC_ADCLK 94 +#define R9A07G044_ADC_PCLK 95 +#define R9A07G044_TSU_PCLK 96 + +/* R9A07G044 Resets */ +#define R9A07G044_CA55_RST_1_0 0 +#define R9A07G044_CA55_RST_1_1 1 +#define R9A07G044_CA55_RST_3_0 2 +#define R9A07G044_CA55_RST_3_1 3 +#define R9A07G044_CA55_RST_4 4 +#define R9A07G044_CA55_RST_5 5 +#define R9A07G044_CA55_RST_6 6 +#define R9A07G044_CA55_RST_7 7 +#define R9A07G044_CA55_RST_8 8 +#define R9A07G044_CA55_RST_9 9 +#define R9A07G044_CA55_RST_10 10 +#define R9A07G044_CA55_RST_11 11 +#define R9A07G044_CA55_RST_12 12 +#define R9A07G044_GIC600_GICRESET_N 13 +#define R9A07G044_GIC600_DBG_GICRESET_N 14 +#define R9A07G044_IA55_RESETN 15 +#define R9A07G044_MHU_RESETN 16 +#define R9A07G044_DMAC_ARESETN 17 +#define R9A07G044_DMAC_RST_ASYNC 18 +#define R9A07G044_SYC_RESETN 19 +#define R9A07G044_OSTM0_PRESETZ 20 +#define R9A07G044_OSTM1_PRESETZ 21 +#define R9A07G044_OSTM2_PRESETZ 22 +#define R9A07G044_MTU_X_PRESET_MTU3 23 +#define R9A07G044_POE3_RST_M_REG 24 +#define R9A07G044_GPT_RST_C 25 +#define R9A07G044_POEG_A_RST 26 +#define R9A07G044_POEG_B_RST 27 +#define R9A07G044_POEG_C_RST 28 +#define R9A07G044_POEG_D_RST 29 +#define R9A07G044_WDT0_PRESETN 30 +#define R9A07G044_WDT1_PRESETN 31 +#define R9A07G044_WDT2_PRESETN 32 +#define R9A07G044_SPI_RST 33 +#define R9A07G044_SDHI0_IXRST 34 +#define R9A07G044_SDHI1_IXRST 35 +#define R9A07G044_GPU_RESETN 36 +#define R9A07G044_GPU_AXI_RESETN 37 +#define R9A07G044_GPU_ACE_RESETN 38 +#define R9A07G044_ISU_ARESETN 39 +#define R9A07G044_ISU_PRESETN 40 +#define R9A07G044_H264_X_RESET_VCP 41 +#define R9A07G044_H264_CP_PRESET_P 42 +#define R9A07G044_CRU_CMN_RSTB 43 +#define R9A07G044_CRU_PRESETN 44 +#define R9A07G044_CRU_ARESETN 45 +#define R9A07G044_MIPI_DSI_CMN_RSTB 46 +#define R9A07G044_MIPI_DSI_ARESET_N 47 +#define R9A07G044_MIPI_DSI_PRESET_N 48 +#define R9A07G044_LCDC_RESET_N 49 +#define R9A07G044_SSI0_RST_M2_REG 50 +#define R9A07G044_SSI1_RST_M2_REG 51 +#define R9A07G044_SSI2_RST_M2_REG 52 +#define R9A07G044_SSI3_RST_M2_REG 53 +#define R9A07G044_SRC_RST 54 +#define R9A07G044_USB_U2H0_HRESETN 55 +#define R9A07G044_USB_U2H1_HRESETN 56 +#define R9A07G044_USB_U2P_EXL_SYSRST 57 +#define R9A07G044_USB_PRESETN 58 +#define R9A07G044_ETH0_RST_HW_N 59 +#define R9A07G044_ETH1_RST_HW_N 60 +#define R9A07G044_I2C0_MRST 61 +#define R9A07G044_I2C1_MRST 62 +#define R9A07G044_I2C2_MRST 63 +#define R9A07G044_I2C3_MRST 64 +#define R9A07G044_SCIF0_RST_SYSTEM_N 65 +#define R9A07G044_SCIF1_RST_SYSTEM_N 66 +#define R9A07G044_SCIF2_RST_SYSTEM_N 67 +#define R9A07G044_SCIF3_RST_SYSTEM_N 68 +#define R9A07G044_SCIF4_RST_SYSTEM_N 69 +#define R9A07G044_SCI0_RST 70 +#define R9A07G044_SCI1_RST 71 +#define R9A07G044_IRDA_RST 72 +#define R9A07G044_RSPI0_RST 73 +#define R9A07G044_RSPI1_RST 74 +#define R9A07G044_RSPI2_RST 75 +#define R9A07G044_CANFD_RSTP_N 76 +#define R9A07G044_CANFD_RSTC_N 77 +#define R9A07G044_GPIO_RSTN 78 +#define R9A07G044_GPIO_PORT_RESETN 79 +#define R9A07G044_GPIO_SPARE_RESETN 80 +#define R9A07G044_ADC_PRESETN 81 +#define R9A07G044_ADC_ADRST_N 82 +#define R9A07G044_TSU_PRESETN 83 #endif /* __DT_BINDINGS_CLOCK_R9A07G044_CPG_H__ */ -- cgit v1.2.3-58-ga151 From 38e0c99249f8f12e1450234a0f7fb357a1b73843 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 24 Jun 2021 10:50:58 +0100 Subject: firmware: arm_scmi: Simplify device probe function on the bus MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the driver core calls the probe callback it already checked that the devices match, so there is no need to call the match callback again. Link: https://lore.kernel.org/r/20210624095059.4010157-1-sudeep.holla@arm.com Suggested-by: Uwe Kleine-König Tested-by: Cristian Marussi Reviewed-by: Cristian Marussi Acked-by: Uwe Kleine-König Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/bus.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c index 784cf0027da3..dc113ad37ad9 100644 --- a/drivers/firmware/arm_scmi/bus.c +++ b/drivers/firmware/arm_scmi/bus.c @@ -104,11 +104,6 @@ static int scmi_dev_probe(struct device *dev) { struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver); struct scmi_device *scmi_dev = to_scmi_dev(dev); - const struct scmi_device_id *id; - - id = scmi_dev_match_id(scmi_dev, scmi_drv); - if (!id) - return -ENODEV; if (!scmi_dev->handle) return -EPROBE_DEFER; -- cgit v1.2.3-58-ga151 From 5e469dac326555d2038d199a6329458cc82a34e5 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 24 Jun 2021 10:50:59 +0100 Subject: firmware: arm_scmi: Ensure drivers provide a probe function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bus probe callback calls the driver callback without further checking. Better be safe than sorry and refuse registration of a driver without a probe function to prevent a NULL pointer exception. Link: https://lore.kernel.org/r/20210624095059.4010157-2-sudeep.holla@arm.com Fixes: 933c504424a2 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices") Reported-by: Uwe Kleine-König Tested-by: Cristian Marussi Reviewed-by: Cristian Marussi Acked-by: Uwe Kleine-König Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/bus.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c index dc113ad37ad9..6c7e24935eca 100644 --- a/drivers/firmware/arm_scmi/bus.c +++ b/drivers/firmware/arm_scmi/bus.c @@ -134,6 +134,9 @@ int scmi_driver_register(struct scmi_driver *driver, struct module *owner, { int retval; + if (!driver->probe) + return -EINVAL; + retval = scmi_protocol_device_request(driver->id_table); if (retval) return retval; -- cgit v1.2.3-58-ga151 From 7a691f16ccad05d770f813d9c4b4337a30c6d63f Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 7 Jul 2021 14:50:28 +0100 Subject: firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow The scmi_linux_errmap buffer access index is supposed to depend on the array size to prevent element out of bounds access. It uses SCMI_ERR_MAX to check bounds but that can mismatch with the array size. It also changes the success into -EIO though scmi_linux_errmap is never used in case of success, it is expected to work for success case too. It is slightly confusing code as the negative of the error code is used as index to the buffer. Fix it by negating it at the start and make it more readable. Link: https://lore.kernel.org/r/20210707135028.1869642-1-sudeep.holla@arm.com Reported-by: kernel test robot Reported-by: Dan Carpenter Reviewed-by: Cristian Marussi Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/driver.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index 66e5e694be7d..36d80661d473 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -47,7 +47,6 @@ enum scmi_error_codes { SCMI_ERR_GENERIC = -8, /* Generic Error */ SCMI_ERR_HARDWARE = -9, /* Hardware Error */ SCMI_ERR_PROTOCOL = -10,/* Protocol Error */ - SCMI_ERR_MAX }; /* List of all SCMI devices active in system */ @@ -166,8 +165,10 @@ static const int scmi_linux_errmap[] = { static inline int scmi_to_linux_errno(int errno) { - if (errno < SCMI_SUCCESS && errno > SCMI_ERR_MAX) - return scmi_linux_errmap[-errno]; + int err_idx = -errno; + + if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap)) + return scmi_linux_errmap[err_idx]; return -EIO; } -- cgit v1.2.3-58-ga151 From 92743071464fca5acbbe812d9a0d88de3eaaad36 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 21 Jun 2021 22:16:51 +0200 Subject: firmware: arm_ffa: Ensure drivers provide a probe function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bus probe callback calls the driver callback without further checking. Better be safe than sorry and refuse registration of a driver without a probe function to prevent a NULL pointer exception. Link: https://lore.kernel.org/r/20210621201652.127611-1-u.kleine-koenig@pengutronix.de Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Signed-off-by: Uwe Kleine-König Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/bus.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/firmware/arm_ffa/bus.c b/drivers/firmware/arm_ffa/bus.c index 83166e02b191..d2cc24319626 100644 --- a/drivers/firmware/arm_ffa/bus.c +++ b/drivers/firmware/arm_ffa/bus.c @@ -99,6 +99,9 @@ int ffa_driver_register(struct ffa_driver *driver, struct module *owner, { int ret; + if (!driver->probe) + return -EINVAL; + driver->driver.bus = &ffa_bus_type; driver->driver.name = driver->name; driver->driver.owner = owner; -- cgit v1.2.3-58-ga151 From e362547addc39e4bb18ad5bdfd59ce4d512d0c08 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 21 Jun 2021 22:16:52 +0200 Subject: firmware: arm_ffa: Simplify probe function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the driver core calls the probe callback it already checked that the devices match, so there is no need to call the match callback again. Link: https://lore.kernel.org/r/20210621201652.127611-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/bus.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_ffa/bus.c b/drivers/firmware/arm_ffa/bus.c index d2cc24319626..00fe595a5bc8 100644 --- a/drivers/firmware/arm_ffa/bus.c +++ b/drivers/firmware/arm_ffa/bus.c @@ -46,9 +46,6 @@ static int ffa_device_probe(struct device *dev) struct ffa_driver *ffa_drv = to_ffa_driver(dev->driver); struct ffa_device *ffa_dev = to_ffa_dev(dev); - if (!ffa_device_match(dev, dev->driver)) - return -ENODEV; - return ffa_drv->probe(ffa_dev); } -- cgit v1.2.3-58-ga151 From ba684a31d3626c86cd9097e12d6ed57d224d077d Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 22 Jun 2021 17:22:02 +0100 Subject: firmware: arm_ffa: Fix the comment style clang produces the following warning: drivers/firmware/arm_ffa/driver.c:123: warning: expecting prototype for FF(). Prototype was for FFA_PAGE_SIZE() instead This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Fix the same by removing the kernel-doc style comment here. Link: https://lore.kernel.org/r/20210622162202.3485866-1-sudeep.holla@arm.com Reported-by: kernel test robot Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index b1edb4b2e94a..88b822575ac4 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -120,7 +120,7 @@ #define PACK_TARGET_INFO(s, r) \ (FIELD_PREP(SENDER_ID_MASK, (s)) | FIELD_PREP(RECEIVER_ID_MASK, (r))) -/** +/* * FF-A specification mentions explicitly about '4K pages'. This should * not be confused with the kernel PAGE_SIZE, which is the translation * granule kernel is configured and may be one among 4K, 16K and 64K. -- cgit v1.2.3-58-ga151 From dd925db6f07556061c11ab1fbfa4a0145ae6b438 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 7 Jul 2021 14:47:39 +0100 Subject: firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow The ffa_linux_errmap buffer access index is supposed to range from 0-8 but it ranges from 1-9 instead. It reads one element out of bounds. It also changes the success into -EINVAL though ffa_to_linux_errno is never used in case of success, it is expected to work for success case too. It is slightly confusing code as the negative of the error code is used as index to the buffer. Fix it by negating it at the start and make it more readable. Link: https://lore.kernel.org/r/20210707134739.1869481-1-sudeep.holla@arm.com Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 88b822575ac4..c9fb56afbcb4 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -149,8 +149,10 @@ static const int ffa_linux_errmap[] = { static inline int ffa_to_linux_errno(int errno) { - if (errno < FFA_RET_SUCCESS && errno >= -ARRAY_SIZE(ffa_linux_errmap)) - return ffa_linux_errmap[-errno]; + int err_idx = -errno; + + if (err_idx >= 0 && err_idx < ARRAY_SIZE(ffa_linux_errmap)) + return ffa_linux_errmap[err_idx]; return -EINVAL; } -- cgit v1.2.3-58-ga151 From 1eb5f4a3ddd949af1abe947c02ad990c013dd620 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 12 Jul 2021 11:13:49 -0500 Subject: mtd: cfi_util: Fix unreachable code issue Fix the following warning: drivers/mtd/chips/cfi_util.c:112:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) ^ drivers/mtd/chips/cfi_util.c:168:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) by placing the fallthrough; statement inside ifdeffery. Reported-by: kernel test robot Signed-off-by: Gustavo A. R. Silva --- drivers/mtd/chips/cfi_util.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 99b7986002f0..6a6a2a21d2ed 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -108,8 +108,8 @@ map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi #if BITS_PER_LONG >= 64 case 8: onecmd |= (onecmd << (chip_mode * 32)); -#endif fallthrough; +#endif case 4: onecmd |= (onecmd << (chip_mode * 16)); fallthrough; @@ -164,8 +164,8 @@ unsigned long cfi_merge_status(map_word val, struct map_info *map, #if BITS_PER_LONG >= 64 case 8: res |= (onestat >> (chip_mode * 32)); -#endif fallthrough; +#endif case 4: res |= (onestat >> (chip_mode * 16)); fallthrough; -- cgit v1.2.3-58-ga151 From a1739c307a072e46473a2ba239eb60e6d711c96c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 11 Jul 2021 15:31:47 -0700 Subject: net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by: Randy Dunlap Cc: Krzysztof Halasa Cc: netdev@vger.kernel.org Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Martin Schiller Cc: linux-x25@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/wan/hdlc_cisco.c | 8 ++++---- drivers/net/wan/hdlc_fr.c | 8 ++++---- drivers/net/wan/hdlc_ppp.c | 8 ++++---- drivers/net/wan/hdlc_raw.c | 8 ++++---- drivers/net/wan/hdlc_raw_eth.c | 8 ++++---- drivers/net/wan/hdlc_x25.c | 8 ++++---- 6 files changed, 24 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index 349ca18088e8..c54fdae950fb 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -364,19 +364,19 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } -static int __init mod_init(void) +static int __init hdlc_cisco_init(void) { register_hdlc_protocol(&proto); return 0; } -static void __exit mod_exit(void) +static void __exit hdlc_cisco_exit(void) { unregister_hdlc_protocol(&proto); } -module_init(mod_init); -module_exit(mod_exit); +module_init(hdlc_cisco_init); +module_exit(hdlc_cisco_exit); MODULE_AUTHOR("Krzysztof Halasa "); MODULE_DESCRIPTION("Cisco HDLC protocol support for generic HDLC"); diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 72250fe0a1df..25e3564ce118 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -1279,19 +1279,19 @@ static int fr_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } -static int __init mod_init(void) +static int __init hdlc_fr_init(void) { register_hdlc_protocol(&proto); return 0; } -static void __exit mod_exit(void) +static void __exit hdlc_fr_exit(void) { unregister_hdlc_protocol(&proto); } -module_init(mod_init); -module_exit(mod_exit); +module_init(hdlc_fr_init); +module_exit(hdlc_fr_exit); MODULE_AUTHOR("Krzysztof Halasa "); MODULE_DESCRIPTION("Frame-Relay protocol support for generic HDLC"); diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index 834be2ae3e9e..b81ecf432a0c 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -705,20 +705,20 @@ static int ppp_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } -static int __init mod_init(void) +static int __init hdlc_ppp_init(void) { skb_queue_head_init(&tx_queue); register_hdlc_protocol(&proto); return 0; } -static void __exit mod_exit(void) +static void __exit hdlc_ppp_exit(void) { unregister_hdlc_protocol(&proto); } -module_init(mod_init); -module_exit(mod_exit); +module_init(hdlc_ppp_init); +module_exit(hdlc_ppp_exit); MODULE_AUTHOR("Krzysztof Halasa "); MODULE_DESCRIPTION("PPP protocol support for generic HDLC"); diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c index 388fcc09b4dd..54d28496fefd 100644 --- a/drivers/net/wan/hdlc_raw.c +++ b/drivers/net/wan/hdlc_raw.c @@ -90,7 +90,7 @@ static int raw_ioctl(struct net_device *dev, struct ifreq *ifr) } -static int __init mod_init(void) +static int __init hdlc_raw_init(void) { register_hdlc_protocol(&proto); return 0; @@ -98,14 +98,14 @@ static int __init mod_init(void) -static void __exit mod_exit(void) +static void __exit hdlc_raw_exit(void) { unregister_hdlc_protocol(&proto); } -module_init(mod_init); -module_exit(mod_exit); +module_init(hdlc_raw_init); +module_exit(hdlc_raw_exit); MODULE_AUTHOR("Krzysztof Halasa "); MODULE_DESCRIPTION("Raw HDLC protocol support for generic HDLC"); diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c index c70a518b8b47..927596276a07 100644 --- a/drivers/net/wan/hdlc_raw_eth.c +++ b/drivers/net/wan/hdlc_raw_eth.c @@ -110,7 +110,7 @@ static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr) } -static int __init mod_init(void) +static int __init hdlc_eth_init(void) { register_hdlc_protocol(&proto); return 0; @@ -118,14 +118,14 @@ static int __init mod_init(void) -static void __exit mod_exit(void) +static void __exit hdlc_eth_exit(void) { unregister_hdlc_protocol(&proto); } -module_init(mod_init); -module_exit(mod_exit); +module_init(hdlc_eth_init); +module_exit(hdlc_eth_exit); MODULE_AUTHOR("Krzysztof Halasa "); MODULE_DESCRIPTION("Ethernet encapsulation support for generic HDLC"); diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index d2bf72bf3bd7..9b7ebf8bd85c 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -365,19 +365,19 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } -static int __init mod_init(void) +static int __init hdlc_x25_init(void) { register_hdlc_protocol(&proto); return 0; } -static void __exit mod_exit(void) +static void __exit hdlc_x25_exit(void) { unregister_hdlc_protocol(&proto); } -module_init(mod_init); -module_exit(mod_exit); +module_init(hdlc_x25_init); +module_exit(hdlc_x25_exit); MODULE_AUTHOR("Krzysztof Halasa "); MODULE_DESCRIPTION("X.25 protocol support for generic HDLC"); -- cgit v1.2.3-58-ga151 From 71ce9d92fc7089f287c3e95a981bdec7545a8588 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 12 Jul 2021 15:37:50 +0100 Subject: octeontx2-pf: Fix uninitialized boolean variable pps In the case where act->id is FLOW_ACTION_POLICE and also act->police.rate_bytes_ps > 0 or act->police.rate_pkt_ps is not > 0 the boolean variable pps contains an uninitialized value when function otx2_tc_act_set_police is called. Fix this by initializing pps to false. Addresses-Coverity: ("Uninitialized scalar variable)" Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c index 905fc02a7dfe..972b202b9884 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c @@ -288,7 +288,7 @@ static int otx2_tc_parse_actions(struct otx2_nic *nic, struct otx2_nic *priv; u32 burst, mark = 0; u8 nr_police = 0; - bool pps; + bool pps = false; u64 rate; int i; -- cgit v1.2.3-58-ga151 From b0863f1927323110e3d0d69f6adb6a91018a9a3c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 12 Jul 2021 14:54:36 -0400 Subject: USB: core: Fix incorrect pipe calculation in do_proc_control() When the user submits a control URB via usbfs, the user supplies the bRequestType value and the kernel uses it to compute the pipe value. However, do_proc_control() performs this computation incorrectly in the case where the bRequestType direction bit is set to USB_DIR_IN and the URB's transfer length is 0: The pipe's direction is also set to IN but it should be OUT, which is the direction the actual transfer will use regardless of bRequestType. Commit 5cc59c418fde ("USB: core: WARN if pipe direction != setup packet direction") added a check to compare the direction bit in the pipe value to a control URB's actual direction and to WARN if they are different. This can be triggered by the incorrect computation mentioned above, as found by syzbot. This patch fixes the computation, thus avoiding the WARNing. Reported-and-tested-by: syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b97464498763..9618ba622a2d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1133,7 +1133,7 @@ static int do_proc_control(struct usb_dev_state *ps, "wIndex=%04x wLength=%04x\n", ctrl->bRequestType, ctrl->bRequest, ctrl->wValue, ctrl->wIndex, ctrl->wLength); - if (ctrl->bRequestType & 0x80) { + if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) { pipe = usb_rcvctrlpipe(dev, 0); snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0); -- cgit v1.2.3-58-ga151 From 7fef2edf7cc753b51f7ccc74993971b0a9c81eca Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 12 Jul 2021 17:50:01 +0200 Subject: sd: don't mess with SD_MINORS for CONFIG_DEBUG_BLOCK_EXT_DEVT No need to give up the original sd minor even with this option, and if we did we'd also need to fix the number of minors for this configuration to actually work. Fixes: 7c3f828b522b0 ("block: refactor device number setup in __device_add_disk") Reported-by: Guenter Roeck Signed-off-by: Christoph Hellwig Tested-by: Guenter Roeck Signed-off-by: Linus Torvalds --- drivers/scsi/sd.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 6d2d63629a90..b8d55af763f9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -98,11 +98,7 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD); MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC); -#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) #define SD_MINORS 16 -#else -#define SD_MINORS 0 -#endif static void sd_config_discard(struct scsi_disk *, unsigned int); static void sd_config_write_same(struct scsi_disk *); -- cgit v1.2.3-58-ga151 From 422969bbb5af2f7226cf75cdb4aae02f46299dc2 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 9 Jul 2021 13:26:20 -0700 Subject: scsi: core: Fix the documentation of the scsi_execute() time parameter The unit of the scsi_execute() timeout parameter is 1/HZ seconds instead of one second, just like the timeouts used in the block layer. Fix the documentation header above the definition of the scsi_execute() macro. Link: https://lore.kernel.org/r/20210709202638.9480-3-bvanassche@acm.org Fixes: "[SCSI] use scatter lists for all block pc requests and simplify hw handlers" # v2.6.16.28 Cc: "James E.J. Bottomley" Cc: Hannes Reinecke Cc: Ming Lei Cc: John Garry Reviewed-by: Avri Altman Reviewed-by: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 8f9727e525aa..7456a26aef51 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -194,7 +194,7 @@ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * @bufflen: len of buffer * @sense: optional sense buffer * @sshdr: optional decoded sense header - * @timeout: request timeout in seconds + * @timeout: request timeout in HZ * @retries: number of times to retry request * @flags: flags for ->cmd_flags * @rq_flags: flags for ->rq_flags -- cgit v1.2.3-58-ga151 From fbf1a58701ecbf61211476277a77eaada6c091d4 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sat, 10 Jul 2021 20:36:23 -0700 Subject: scsi: fas216: Fix a build error Use SAM_STAT_GOOD instead of GOOD since GOOD has been removed. Link: https://lore.kernel.org/r/20210711033623.11267-1-bvanassche@acm.org Fixes: 3d45cefc8edd ("scsi: core: Drop obsolete Linux-specific SCSI status codes") Fixes: df1303147649 ("scsi: fas216: Use get_status_byte() to avoid using Linux-specific status codes") Cc: Hannes Reinecke Reviewed-by: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/arm/fas216.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 30ed3d23635a..6baa9b36367d 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -2010,7 +2010,7 @@ static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, "request sense complete, result=0x%04x%02x%02x", result, SCpnt->SCp.Message, SCpnt->SCp.Status); - if (result != DID_OK || SCpnt->SCp.Status != GOOD) + if (result != DID_OK || SCpnt->SCp.Status != SAM_STAT_GOOD) /* * Something went wrong. Make sure that we don't * have valid data in the sense buffer that could -- cgit v1.2.3-58-ga151 From 93aa71ad7379900e61c8adff6a710a4c18c7c99b Mon Sep 17 00:00:00 2001 From: Tyrel Datwyler Date: Thu, 1 Jul 2021 13:56:59 -0600 Subject: scsi: core: Fix bad pointer dereference when ehandler kthread is invalid Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn. Link: https://lore.kernel.org/r/20210701195659.3185475-1-tyreld@linux.ibm.com Fixes: 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") Cc: stable@vger.kernel.org Reviewed-by: Ming Lei Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen --- drivers/scsi/hosts.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 929a3b043ad7..3f6f14f0cafb 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -488,6 +488,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost_printk(KERN_WARNING, shost, "error handler thread failed to spawn, error = %ld\n", PTR_ERR(shost->ehandler)); + shost->ehandler = NULL; goto fail; } -- cgit v1.2.3-58-ga151 From 8b3bdd99c092bbaeaa7d9eecb1a3e5dc9112002b Mon Sep 17 00:00:00 2001 From: Steffen Maier Date: Fri, 2 Jul 2021 18:09:22 +0200 Subject: scsi: zfcp: Report port fc_security as unknown early during remote cable pull On remote cable pull, a zfcp_port keeps its status and only gets ZFCP_STATUS_PORT_LINK_TEST added. Only after an ADISC timeout, we would actually start port recovery and remove ZFCP_STATUS_COMMON_UNBLOCKED which zfcp_sysfs_port_fc_security_show() detected and reported as "unknown" instead of the old and possibly stale zfcp_port->connection_info. Add check for ZFCP_STATUS_PORT_LINK_TEST for timely "unknown" report. Link: https://lore.kernel.org/r/20210702160922.2667874-1-maier@linux.ibm.com Fixes: a17c78460093 ("scsi: zfcp: report FC Endpoint Security in sysfs") Cc: #5.7+ Reviewed-by: Benjamin Block Signed-off-by: Steffen Maier Signed-off-by: Martin K. Petersen --- drivers/s390/scsi/zfcp_sysfs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 544efd4c42f0..b8cd75a872ee 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -487,6 +487,7 @@ static ssize_t zfcp_sysfs_port_fc_security_show(struct device *dev, if (0 == (status & ZFCP_STATUS_COMMON_OPEN) || 0 == (status & ZFCP_STATUS_COMMON_UNBLOCKED) || 0 == (status & ZFCP_STATUS_PORT_PHYS_OPEN) || + 0 != (status & ZFCP_STATUS_PORT_LINK_TEST) || 0 != (status & ZFCP_STATUS_COMMON_ERP_FAILED) || 0 != (status & ZFCP_STATUS_COMMON_ACCESS_BOXED)) i = sprintf(buf, "unknown\n"); -- cgit v1.2.3-58-ga151 From bb6beabf2f79ea063750bf16e78b61e5a50f2d5c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 8 Jul 2021 09:57:23 -0700 Subject: scsi: pm8001: Clean up kernel-doc and comments Fix kernel-doc warnings then test again, wash, rinse, find more, then repeat more/again. Also fix spellos, some grammar, and some punctuation. ../drivers/scsi/pm8001/pm8001_ctl.c:557: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** pm8001_ctl_fatal_log_show - fatal error logging ../drivers/scsi/pm8001/pm8001_ctl.c:577: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** non_fatal_log_show - non fatal error logging ../drivers/scsi/pm8001/pm8001_ctl.c:622: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** pm8001_ctl_gsm_log_show - gsm dump collection Link: https://lore.kernel.org/r/20210708165723.8594-1-rdunlap@infradead.org Cc: Jack Wang Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Acked-by: Jack Wang Signed-off-by: Randy Dunlap Signed-off-by: Martin K. Petersen --- drivers/scsi/pm8001/pm8001_ctl.c | 48 ++++++++++++++++++++----------------- drivers/scsi/pm8001/pm8001_hwi.c | 18 +++++++------- drivers/scsi/pm8001/pm8001_init.c | 29 ++++++++++++----------- drivers/scsi/pm8001/pm8001_sas.c | 41 +++++++++++++++++--------------- drivers/scsi/pm8001/pm80xx_hwi.c | 50 +++++++++++++++++++-------------------- 5 files changed, 97 insertions(+), 89 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c index 0b8802beb7ce..ec05c42e8ee6 100644 --- a/drivers/scsi/pm8001/pm8001_ctl.c +++ b/drivers/scsi/pm8001/pm8001_ctl.c @@ -77,7 +77,7 @@ DEVICE_ATTR(interface_rev, S_IRUGO, pm8001_ctl_mpi_interface_rev_show, NULL); * @attr: device attribute (unused) * @buf: the buffer returned * - * A sysfs 'read only' shost attribute. + * A sysfs 'read-only' shost attribute. */ static ssize_t controller_fatal_error_show(struct device *cdev, struct device_attribute *attr, char *buf) @@ -149,7 +149,7 @@ static ssize_t pm8001_ctl_ila_version_show(struct device *cdev, static DEVICE_ATTR(ila_version, 0444, pm8001_ctl_ila_version_show, NULL); /** - * pm8001_ctl_inactive_fw_version_show - Inacative firmware version number + * pm8001_ctl_inactive_fw_version_show - Inactive firmware version number * @cdev: pointer to embedded class device * @attr: device attribute (unused) * @buf: the buffer returned @@ -396,6 +396,7 @@ static DEVICE_ATTR(aap_log, S_IRUGO, pm8001_ctl_aap_log_show, NULL); * @cdev:pointer to embedded class device * @attr: device attribute (unused) * @buf: the buffer returned + * * A sysfs 'read-only' shost attribute. */ static ssize_t pm8001_ctl_ib_queue_log_show(struct device *cdev, @@ -430,6 +431,7 @@ static DEVICE_ATTR(ib_log, S_IRUGO, pm8001_ctl_ib_queue_log_show, NULL); * @cdev:pointer to embedded class device * @attr: device attribute (unused) * @buf: the buffer returned + * * A sysfs 'read-only' shost attribute. */ @@ -464,6 +466,7 @@ static DEVICE_ATTR(ob_log, S_IRUGO, pm8001_ctl_ob_queue_log_show, NULL); * @cdev:pointer to embedded class device * @attr: device attribute (unused) * @buf:the buffer returned + * * A sysfs 'read-only' shost attribute. */ static ssize_t pm8001_ctl_bios_version_show(struct device *cdev, @@ -555,13 +558,13 @@ static ssize_t pm8001_ctl_iop_log_show(struct device *cdev, static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL); /** - ** pm8001_ctl_fatal_log_show - fatal error logging - ** @cdev:pointer to embedded class device - ** @attr: device attribute - ** @buf: the buffer returned - ** - ** A sysfs 'read-only' shost attribute. - **/ + * pm8001_ctl_fatal_log_show - fatal error logging + * @cdev:pointer to embedded class device + * @attr: device attribute + * @buf: the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev, struct device_attribute *attr, char *buf) @@ -575,13 +578,13 @@ static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev, static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL); /** - ** non_fatal_log_show - non fatal error logging - ** @cdev:pointer to embedded class device - ** @attr: device attribute - ** @buf: the buffer returned - ** - ** A sysfs 'read-only' shost attribute. - **/ + * non_fatal_log_show - non fatal error logging + * @cdev:pointer to embedded class device + * @attr: device attribute + * @buf: the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ static ssize_t non_fatal_log_show(struct device *cdev, struct device_attribute *attr, char *buf) { @@ -620,12 +623,13 @@ static ssize_t non_fatal_count_store(struct device *cdev, static DEVICE_ATTR_RW(non_fatal_count); /** - ** pm8001_ctl_gsm_log_show - gsm dump collection - ** @cdev:pointer to embedded class device - ** @attr: device attribute (unused) - ** @buf: the buffer returned - ** A sysfs 'read-only' shost attribute. - **/ + * pm8001_ctl_gsm_log_show - gsm dump collection + * @cdev:pointer to embedded class device + * @attr: device attribute (unused) + * @buf: the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ static ssize_t pm8001_ctl_gsm_log_show(struct device *cdev, struct device_attribute *attr, char *buf) { diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 33f8217577b1..17c0f26e683a 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -384,7 +384,7 @@ static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, /** * pm8001_bar4_shift - function is called to shift BAR base address - * @pm8001_ha : our hba card infomation + * @pm8001_ha : our hba card information * @shiftValue : shifting value in memory bar. */ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) @@ -1151,7 +1151,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_iounmap - which maped when initialized. + * pm8001_chip_iounmap - which mapped when initialized. * @pm8001_ha: our hba card information */ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha) @@ -1187,10 +1187,10 @@ pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha) pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL); } - /** - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt - * @pm8001_ha: our hba card information - */ +/** + * pm8001_chip_intx_interrupt_disable - disable PM8001 chip interrupt + * @pm8001_ha: our hba card information + */ static void pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha) { @@ -1876,8 +1876,8 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha, * @piomb: the message contents of this outbound message. * * When FW has completed a ssp request for example a IO request, after it has - * filled the SG data with the data, it will trigger this event represent - * that he has finished the job,please check the coresponding buffer. + * filled the SG data with the data, it will trigger this event representing + * that he has finished the job; please check the corresponding buffer. * So we will tell the caller who maybe waiting the result to tell upper layer * that the task has been finished. */ @@ -3522,7 +3522,7 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) * * when sas layer find a device it will notify LLDD, then the driver register * the domain device to FW, this event is the return device ID which the FW - * has assigned, from now,inter-communication with FW is no longer using the + * has assigned, from now, inter-communication with FW is no longer using the * SAS address, use device ID which FW assigned. */ int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 313248c7bab9..47db7e0beae6 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -233,7 +233,7 @@ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque) /** * pm8001_interrupt_handler_intx - main INTx interrupt handler. * @irq: interrupt number - * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure. + * @dev_id: sas_ha structure. The HBA is retrieved from sas_ha structure. */ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id) @@ -439,9 +439,9 @@ err_out: } /** - * pm8001_ioremap - remap the pci high physical address to kernal virtual + * pm8001_ioremap - remap the pci high physical address to kernel virtual * address so that we can access them. - * @pm8001_ha:our hba structure. + * @pm8001_ha: our hba structure. */ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha) { @@ -652,7 +652,7 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, * pm8001_init_sas_add - initialize sas address * @pm8001_ha: our ha struct. * - * Currently we just set the fixed SAS address to our HBA,for manufacture, + * Currently we just set the fixed SAS address to our HBA, for manufacture, * it should read from the EEPROM */ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) @@ -790,7 +790,7 @@ struct pm8001_mpi3_phy_pg_trx_config { }; /** - * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings + * pm8001_get_internal_phy_settings - Retrieves the internal PHY settings * @pm8001_ha : our adapter * @phycfg : PHY config page to populate */ @@ -810,7 +810,7 @@ void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_get_external_phy_settings : Retrieves the external PHY settings + * pm8001_get_external_phy_settings - Retrieves the external PHY settings * @pm8001_ha : our adapter * @phycfg : PHY config page to populate */ @@ -830,7 +830,7 @@ void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext + * pm8001_get_phy_mask - Retrieves the mask that denotes if a PHY is int/ext * @pm8001_ha : our adapter * @phymask : The PHY mask */ @@ -868,7 +868,7 @@ void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask) } /** - * pm8001_set_phy_settings_ven_117c_12G() : Configure ATTO 12Gb PHY settings + * pm8001_set_phy_settings_ven_117c_12G() - Configure ATTO 12Gb PHY settings * @pm8001_ha : our adapter */ static @@ -903,7 +903,7 @@ int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID. + * pm8001_configure_phy_settings - Configures PHY settings based on vendor ID. * @pm8001_ha : our hba. */ static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha) @@ -1053,8 +1053,8 @@ intx: * @ent: pci device id * * This function is the main initialization function, when register a new - * pci driver it is invoked, all struct an hardware initilization should be done - * here, also, register interrupt + * pci driver it is invoked, all struct and hardware initialization should be + * done here, also, register interrupt. */ static int pm8001_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -1172,10 +1172,11 @@ err_out_enable: return rc; } -/* +/** * pm8001_init_ccb_tag - allocate memory to CCB and tag. * @pm8001_ha: our hba card information. * @shost: scsi host which has been allocated outside. + * @pdev: pci device. */ static int pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost, @@ -1270,7 +1271,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev) * pm8001_pci_suspend - power management suspend main entry point * @dev: Device struct * - * Returns 0 success, anything else error. + * Return: 0 on success, anything else on error. */ static int __maybe_unused pm8001_pci_suspend(struct device *dev) { @@ -1315,7 +1316,7 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev) * pm8001_pci_resume - power management resume main entry point * @dev: Device struct * - * Returns 0 success, anything else error. + * Return: 0 on success, anything else on error. */ static int __maybe_unused pm8001_pci_resume(struct device *dev) { diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 6f33d821e545..48548a95327b 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -98,14 +98,16 @@ void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha) pm8001_tag_free(pm8001_ha, i); } - /** - * pm8001_mem_alloc - allocate memory for pm8001. - * @pdev: pci device. - * @virt_addr: the allocated virtual address - * @pphys_addr_hi: the physical address high byte address. - * @pphys_addr_lo: the physical address low byte address. - * @mem_size: memory size. - */ +/** + * pm8001_mem_alloc - allocate memory for pm8001. + * @pdev: pci device. + * @virt_addr: the allocated virtual address + * @pphys_addr: DMA address for this device + * @pphys_addr_hi: the physical address high byte address. + * @pphys_addr_lo: the physical address low byte address. + * @mem_size: memory size. + * @align: requested byte alignment + */ int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo, u32 mem_size, u32 align) @@ -339,7 +341,7 @@ static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task + * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task * @pm8001_ha: our hba card information * @ccb: the ccb which attached to ssp task */ @@ -554,10 +556,10 @@ void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, pm8001_tag_free(pm8001_ha, ccb_idx); } - /** - * pm8001_alloc_dev - find a empty pm8001_device - * @pm8001_ha: our hba card information - */ +/** + * pm8001_alloc_dev - find a empty pm8001_device + * @pm8001_ha: our hba card information + */ static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) { u32 dev; @@ -705,7 +707,7 @@ static void pm8001_tmf_timedout(struct timer_list *t) * @parameter: ssp task parameter. * * when errors or exception happened, we may want to do something, for example - * abort the issued task which result in this execption, it is done by calling + * abort the issued task which result in this exception, it is done by calling * this function, note it is also with the task execute interface. */ static int pm8001_exec_internal_tmf_task(struct domain_device *dev, @@ -984,11 +986,12 @@ void pm8001_open_reject_retry( } /** - * pm8001_I_T_nexus_reset() - * Standard mandates link reset for ATA (type 0) and hard reset for - * SSP (type 1) , only for RECOVERY - * @dev: the device structure for the device to reset. - */ + * pm8001_I_T_nexus_reset() - reset the initiator/target connection + * @dev: the device structure for the device to reset. + * + * Standard mandates link reset for ATA (type 0) and hard reset for + * SSP (type 1), only for RECOVERY + */ int pm8001_I_T_nexus_reset(struct domain_device *dev) { int rc = TMF_RESP_FUNC_FAILED; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 45ecd9639977..6ffe17b849ae 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -140,7 +140,7 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev, pm8001_ha->fatal_bar_loc = 0; } - /* Read until accum_len is retrived */ + /* Read until accum_len is retrieved */ accum_len = pm8001_mr32(fatal_table_address, MPI_FATAL_EDUMP_TABLE_ACCUM_LEN); /* Determine length of data between previously stored transfer length @@ -1011,7 +1011,7 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha) value); return -EBUSY; } - /* check the MPI-State for initialization upto 100ms*/ + /* check the MPI-State for initialization up to 100ms*/ max_wait_count = 5;/* 100 msec */ do { msleep(FW_READY_INTERVAL); @@ -1093,7 +1093,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0); - /** + /* * lower 26 bits of SCRATCHPAD0 register describes offset within the * PCIe BAR where the MPI configuration table is present */ @@ -1101,7 +1101,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) pm8001_dbg(pm8001_ha, DEV, "Scratchpad 0 Offset: 0x%x value 0x%x\n", offset, value); - /** + /* * Upper 6 bits describe the offset within PCI config space where BAR * is located. */ @@ -1109,7 +1109,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) pcibar = get_pci_bar_index(pcilogic); pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar); - /** + /* * Make sure the offset falls inside the ioremapped PCI BAR */ if (offset > pm8001_ha->io_mem[pcibar].memsize) { @@ -1121,7 +1121,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) pm8001_ha->main_cfg_tbl_addr = base_addr = pm8001_ha->io_mem[pcibar].memvirtaddr + offset; - /** + /* * Validate main configuration table address: first DWord should read * "PMCS" */ @@ -1385,7 +1385,7 @@ pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha) } /** - * pm80xx_encrypt_update - update flash with encryption informtion + * pm80xx_encrypt_update - update flash with encryption information * @pm8001_ha: our hba card information. */ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha) @@ -1422,7 +1422,7 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha) } /** - * pm80xx_chip_init - the main init function that initialize whole PM8001 chip. + * pm80xx_chip_init - the main init function that initializes whole PM8001 chip. * @pm8001_ha: our hba card information */ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha) @@ -1541,7 +1541,7 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) } /** - * pm80xx_fatal_errors - returns non zero *ONLY* when fatal errors + * pm80xx_fatal_errors - returns non-zero *ONLY* when fatal errors * @pm8001_ha: our hba card information * * Fatal errors are recoverable only after a host reboot. @@ -1576,8 +1576,8 @@ pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha) } /** - * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that the clear all - * the FW register status to the originated status. + * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that all + * FW register status are reset to the originated status. * @pm8001_ha: our hba card information */ @@ -1895,13 +1895,13 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha, } /** - * mpi_ssp_completion- process the event that FW response to the SSP request. + * mpi_ssp_completion - process the event that FW response to the SSP request. * @pm8001_ha: our hba card information * @piomb: the message contents of this outbound message. * * When FW has completed a ssp request for example a IO request, after it has - * filled the SG data with the data, it will trigger this event represent - * that he has finished the job,please check the coresponding buffer. + * filled the SG data with the data, it will trigger this event representing + * that he has finished the job; please check the corresponding buffer. * So we will tell the caller who maybe waiting the result to tell upper layer * that the task has been finished. */ @@ -3217,7 +3217,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW. + * pm80xx_hw_event_ack_req- For PM8001, some events need to acknowledge to FW. * @pm8001_ha: our hba card information * @Qnum: the outbound queue message number. * @SEA: source of event to ack @@ -3275,7 +3275,7 @@ static void hw_event_port_recover(struct pm8001_hba_info *pm8001_ha, } /** - * hw_event_sas_phy_up -FW tells me a SAS phy up event. + * hw_event_sas_phy_up - FW tells me a SAS phy up event. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -3353,7 +3353,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * hw_event_sata_phy_up -FW tells me a SATA phy up event. + * hw_event_sata_phy_up - FW tells me a SATA phy up event. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -3400,7 +3400,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * hw_event_phy_down -we should notify the libsas the phy is down. + * hw_event_phy_down - we should notify the libsas the phy is down. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -3500,7 +3500,7 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * mpi_thermal_hw_event -The hw event has come. + * mpi_thermal_hw_event - a thermal hw event has come. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -3530,7 +3530,7 @@ static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * mpi_hw_event -The hw event has come. + * mpi_hw_event - The hw event has come. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -4025,7 +4025,7 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb) case OPC_OUB_SET_DEV_INFO: pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n"); break; - /* spcv specifc commands */ + /* spcv specific commands */ case OPC_OUB_PHY_START_RESP: pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PHY_START_RESP opcode:%x\n", opc); @@ -4186,7 +4186,7 @@ static void build_smp_cmd(u32 deviceID, __le32 hTag, } /** - * pm80xx_chip_smp_req - send a SMP task to FW + * pm80xx_chip_smp_req - send an SMP task to FW * @pm8001_ha: our hba card information. * @ccb: the ccb information this request used. */ @@ -4346,7 +4346,7 @@ static int check_enc_sat_cmd(struct sas_task *task) } /** - * pm80xx_chip_ssp_io_req - send a SSP task to FW + * pm80xx_chip_ssp_io_req - send an SSP task to FW * @pm8001_ha: our hba card information. * @ccb: the ccb information this request used. */ @@ -4750,13 +4750,13 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | LINKMODE_AUTO | pm8001_ha->link_rate | phy_id); /* SSC Disable and SAS Analog ST configuration */ - /** + /* payload.ase_sh_lm_slr_phyid = cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE | LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | phy_id); Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need - **/ + */ payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; -- cgit v1.2.3-58-ga151 From aa0dc6a73309f1fc779f4560a60ee766a3891adc Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Wed, 7 Jul 2021 13:47:56 +0530 Subject: scsi: mpi3mr: Fix W=1 compilation warnings Fix for the following W=1 compilation warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 64 Link: https://lore.kernel.org/r/20210707081756.20922-1-sreekanth.reddy@broadcom.com Reported-by: kernel test robot Signed-off-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen --- drivers/scsi/mpi3mr/mpi3mr_fw.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index 9eceafca59bc..2dba2b0af166 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -2607,14 +2607,13 @@ static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc) goto out; } drv_info->information_length = cpu_to_le32(data_len); - strncpy(drv_info->driver_signature, "Broadcom", sizeof(drv_info->driver_signature)); - strncpy(drv_info->os_name, utsname()->sysname, sizeof(drv_info->os_name)); - drv_info->os_name[sizeof(drv_info->os_name) - 1] = 0; - strncpy(drv_info->os_version, utsname()->release, sizeof(drv_info->os_version)); - drv_info->os_version[sizeof(drv_info->os_version) - 1] = 0; - strncpy(drv_info->driver_name, MPI3MR_DRIVER_NAME, sizeof(drv_info->driver_name)); - strncpy(drv_info->driver_version, MPI3MR_DRIVER_VERSION, sizeof(drv_info->driver_version)); - strncpy(drv_info->driver_release_date, MPI3MR_DRIVER_RELDATE, sizeof(drv_info->driver_release_date)); + strscpy(drv_info->driver_signature, "Broadcom", sizeof(drv_info->driver_signature)); + strscpy(drv_info->os_name, utsname()->sysname, sizeof(drv_info->os_name)); + strscpy(drv_info->os_version, utsname()->release, sizeof(drv_info->os_version)); + strscpy(drv_info->driver_name, MPI3MR_DRIVER_NAME, sizeof(drv_info->driver_name)); + strscpy(drv_info->driver_version, MPI3MR_DRIVER_VERSION, sizeof(drv_info->driver_version)); + strscpy(drv_info->driver_release_date, MPI3MR_DRIVER_RELDATE, + sizeof(drv_info->driver_release_date)); drv_info->driver_capabilities = 0; memcpy((u8 *)&mrioc->driver_info, (u8 *)drv_info, sizeof(mrioc->driver_info)); -- cgit v1.2.3-58-ga151 From 053c16ac89050ef0e8ab9dc1edaf157bf104c8c6 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Wed, 30 Jun 2021 17:51:17 -0700 Subject: scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req() This patch adds a host_lock which existed before on ufshcd_vops_setup_xfer_req(). Link: https://lore.kernel.org/r/20210701005117.3846179-1-jaegeuk@kernel.org Fixes: a45f937110fa ("scsi: ufs: Optimize host lock on transfer requests send/compl paths") Cc: Stanley Chu Cc: Can Guo Cc: Bean Huo Cc: Bart Van Assche Cc: Asutosh Das Reviewed-by: Bart Van Assche Signed-off-by: Jaegeuk Kim Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index c98d540ac044..194755c9ddfe 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -1229,8 +1229,13 @@ static inline int ufshcd_vops_pwr_change_notify(struct ufs_hba *hba, static inline void ufshcd_vops_setup_xfer_req(struct ufs_hba *hba, int tag, bool is_scsi_cmd) { - if (hba->vops && hba->vops->setup_xfer_req) - return hba->vops->setup_xfer_req(hba, tag, is_scsi_cmd); + if (hba->vops && hba->vops->setup_xfer_req) { + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->vops->setup_xfer_req(hba, tag, is_scsi_cmd); + spin_unlock_irqrestore(hba->host->host_lock, flags); + } } static inline void ufshcd_vops_setup_task_mgmt(struct ufs_hba *hba, -- cgit v1.2.3-58-ga151 From e181ad43887c6b6b5995e9b191666f04242d77eb Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 12 Jul 2021 21:24:07 -0500 Subject: drm/msm: Fix fall-through warning in msm_gem_new_impl() Fix the following fall-through warning: drivers/gpu/drm/msm/msm_gem.c: In function 'msm_gem_new_impl': drivers/gpu/drm/msm/msm_gem.c:1170:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 1170 | if (priv->has_cached_coherent) | ^ drivers/gpu/drm/msm/msm_gem.c:1173:2: note: here 1173 | default: | ^~~~~~~ by replacing the /* fallthrough */ comment with fallthrough; Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva --- drivers/gpu/drm/msm/msm_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index 141178754231..1e8a971a86f2 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -1169,7 +1169,7 @@ static int msm_gem_new_impl(struct drm_device *dev, case MSM_BO_CACHED_COHERENT: if (priv->has_cached_coherent) break; - /* fallthrough */ + fallthrough; default: DRM_DEV_ERROR(dev->dev, "invalid cache flag: %x\n", (flags & MSM_BO_CACHE_MASK)); -- cgit v1.2.3-58-ga151 From 8b43ced64d2baca72a13caf2a7182f2853e054bd Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Tue, 13 Jul 2021 11:31:56 +0200 Subject: nvme-tcp: use __dev_get_by_name instead dev_get_by_name for OPT_HOST_IFACE dev_get_by_name() finds network device by name but it also increases the reference count. If a nvme-tcp queue is present and the network device driver is removed before nvme_tcp, we will face the following continuous log: "kernel:unregister_netdevice: waiting for to become free. Usage count = 2" And rmmod further halts. Similar case arises during reboot/shutdown with nvme-tcp queue present and both never completes. To fix this, use __dev_get_by_name() which finds network device by name without increasing any reference counter. Fixes: 3ede8f72a9a2 ("nvme-tcp: allow selecting the network interface for connections") Signed-off-by: Omkar Kulkarni Signed-off-by: Shai Malin Signed-off-by: Prabhakar Kushwaha Reviewed-by: Sagi Grimberg [hch: remove the ->ndev member entirely] Signed-off-by: Christoph Hellwig --- drivers/nvme/host/tcp.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 12acfe05cd68..8cb15ee5b249 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -123,7 +123,6 @@ struct nvme_tcp_ctrl { struct blk_mq_tag_set admin_tag_set; struct sockaddr_storage addr; struct sockaddr_storage src_addr; - struct net_device *ndev; struct nvme_ctrl ctrl; struct work_struct err_work; @@ -2533,8 +2532,7 @@ static struct nvme_ctrl *nvme_tcp_create_ctrl(struct device *dev, } if (opts->mask & NVMF_OPT_HOST_IFACE) { - ctrl->ndev = dev_get_by_name(&init_net, opts->host_iface); - if (!ctrl->ndev) { + if (!__dev_get_by_name(&init_net, opts->host_iface)) { pr_err("invalid interface passed: %s\n", opts->host_iface); ret = -ENODEV; -- cgit v1.2.3-58-ga151 From e4b9852a0f4afe40604afb442e3af4452722050a Mon Sep 17 00:00:00 2001 From: Casey Chen Date: Wed, 7 Jul 2021 14:14:31 -0700 Subject: nvme-pci: fix multiple races in nvme_setup_io_queues Below two paths could overlap each other if we power off a drive quickly after powering it on. There are multiple races in nvme_setup_io_queues() because of shutdown_lock missing and improper use of NVMEQ_ENABLED bit. nvme_reset_work() nvme_remove() nvme_setup_io_queues() nvme_dev_disable() ... ... A1 clear NVMEQ_ENABLED bit for admin queue lock retry: B1 nvme_suspend_io_queues() A2 pci_free_irq() admin queue B2 nvme_suspend_queue() admin queue A3 pci_free_irq_vectors() nvme_pci_disable() A4 nvme_setup_irqs(); B3 pci_free_irq_vectors() ... unlock A5 queue_request_irq() for admin queue set NVMEQ_ENABLED bit ... nvme_create_io_queues() A6 result = queue_request_irq(); set NVMEQ_ENABLED bit ... fail to allocate enough IO queues: A7 nvme_suspend_io_queues() goto retry If B3 runs in between A1 and A2, it will crash if irqaction haven't been freed by A2. B2 is supposed to free admin queue IRQ but it simply can't fulfill the job as A1 has cleared NVMEQ_ENABLED bit. Fix: combine A1 A2 so IRQ get freed as soon as the NVMEQ_ENABLED bit gets cleared. After solved #1, A2 could race with B3 if A2 is freeing IRQ while B3 is checking irqaction. A3 also could race with B2 if B2 is freeing IRQ while A3 is checking irqaction. Fix: A2 and A3 take lock for mutual exclusion. A3 could race with B3 since they could run free_msi_irqs() in parallel. Fix: A3 takes lock for mutual exclusion. A4 could fail to allocate all needed IRQ vectors if A3 and A4 are interrupted by B3. Fix: A4 takes lock for mutual exclusion. If A5/A6 happened after B2/B1, B3 will crash since irqaction is not NULL. They are just allocated by A5/A6. Fix: Lock queue_request_irq() and setting of NVMEQ_ENABLED bit. A7 could get chance to pci_free_irq() for certain IO queue while B3 is checking irqaction. Fix: A7 takes lock. nvme_dev->online_queues need to be protected by shutdown_lock. Since it is not atomic, both paths could modify it using its own copy. Co-developed-by: Yuanyuan Zhong Signed-off-by: Casey Chen Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 66 +++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 58 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index d3c5086673bc..46698cabef81 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1554,6 +1554,28 @@ static void nvme_init_queue(struct nvme_queue *nvmeq, u16 qid) wmb(); /* ensure the first interrupt sees the initialization */ } +/* + * Try getting shutdown_lock while setting up IO queues. + */ +static int nvme_setup_io_queues_trylock(struct nvme_dev *dev) +{ + /* + * Give up if the lock is being held by nvme_dev_disable. + */ + if (!mutex_trylock(&dev->shutdown_lock)) + return -ENODEV; + + /* + * Controller is in wrong state, fail early. + */ + if (dev->ctrl.state != NVME_CTRL_CONNECTING) { + mutex_unlock(&dev->shutdown_lock); + return -ENODEV; + } + + return 0; +} + static int nvme_create_queue(struct nvme_queue *nvmeq, int qid, bool polled) { struct nvme_dev *dev = nvmeq->dev; @@ -1582,8 +1604,11 @@ static int nvme_create_queue(struct nvme_queue *nvmeq, int qid, bool polled) goto release_cq; nvmeq->cq_vector = vector; - nvme_init_queue(nvmeq, qid); + result = nvme_setup_io_queues_trylock(dev); + if (result) + return result; + nvme_init_queue(nvmeq, qid); if (!polled) { result = queue_request_irq(nvmeq); if (result < 0) @@ -1591,10 +1616,12 @@ static int nvme_create_queue(struct nvme_queue *nvmeq, int qid, bool polled) } set_bit(NVMEQ_ENABLED, &nvmeq->flags); + mutex_unlock(&dev->shutdown_lock); return result; release_sq: dev->online_queues--; + mutex_unlock(&dev->shutdown_lock); adapter_delete_sq(dev, qid); release_cq: adapter_delete_cq(dev, qid); @@ -2167,7 +2194,18 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) if (nr_io_queues == 0) return 0; - clear_bit(NVMEQ_ENABLED, &adminq->flags); + /* + * Free IRQ resources as soon as NVMEQ_ENABLED bit transitions + * from set to unset. If there is a window to it is truely freed, + * pci_free_irq_vectors() jumping into this window will crash. + * And take lock to avoid racing with pci_free_irq_vectors() in + * nvme_dev_disable() path. + */ + result = nvme_setup_io_queues_trylock(dev); + if (result) + return result; + if (test_and_clear_bit(NVMEQ_ENABLED, &adminq->flags)) + pci_free_irq(pdev, 0, adminq); if (dev->cmb_use_sqes) { result = nvme_cmb_qdepth(dev, nr_io_queues, @@ -2183,14 +2221,17 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) result = nvme_remap_bar(dev, size); if (!result) break; - if (!--nr_io_queues) - return -ENOMEM; + if (!--nr_io_queues) { + result = -ENOMEM; + goto out_unlock; + } } while (1); adminq->q_db = dev->dbs; retry: /* Deregister the admin queue's interrupt */ - pci_free_irq(pdev, 0, adminq); + if (test_and_clear_bit(NVMEQ_ENABLED, &adminq->flags)) + pci_free_irq(pdev, 0, adminq); /* * If we enable msix early due to not intx, disable it again before @@ -2199,8 +2240,10 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) pci_free_irq_vectors(pdev); result = nvme_setup_irqs(dev, nr_io_queues); - if (result <= 0) - return -EIO; + if (result <= 0) { + result = -EIO; + goto out_unlock; + } dev->num_vecs = result; result = max(result - 1, 1); @@ -2214,8 +2257,9 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) */ result = queue_request_irq(adminq); if (result) - return result; + goto out_unlock; set_bit(NVMEQ_ENABLED, &adminq->flags); + mutex_unlock(&dev->shutdown_lock); result = nvme_create_io_queues(dev); if (result || dev->online_queues < 2) @@ -2224,6 +2268,9 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) if (dev->online_queues - 1 < dev->max_qid) { nr_io_queues = dev->online_queues - 1; nvme_disable_io_queues(dev); + result = nvme_setup_io_queues_trylock(dev); + if (result) + return result; nvme_suspend_io_queues(dev); goto retry; } @@ -2232,6 +2279,9 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) dev->io_queues[HCTX_TYPE_READ], dev->io_queues[HCTX_TYPE_POLL]); return 0; +out_unlock: + mutex_unlock(&dev->shutdown_lock); + return result; } static void nvme_del_queue_end(struct request *req, blk_status_t error) -- cgit v1.2.3-58-ga151 From 251ef6f71be2adfd09546a26643426fe62585173 Mon Sep 17 00:00:00 2001 From: Casey Chen Date: Wed, 7 Jul 2021 14:14:32 -0700 Subject: nvme-pci: do not call nvme_dev_remove_admin from nvme_remove nvme_dev_remove_admin could free dev->admin_q and the admin_tagset while they are being accessed by nvme_dev_disable(), which can be called by nvme_reset_work via nvme_remove_dead_ctrl. Commit cb4bfda62afa ("nvme-pci: fix hot removal during error handling") intended to avoid requests being stuck on a removed controller by killing the admin queue. But the later fix c8e9e9b7646e ("nvme-pci: unquiesce admin queue on shutdown"), together with nvme_dev_disable(dev, true) right before nvme_dev_remove_admin() could help dispatch requests and fail them early, so we don't need nvme_dev_remove_admin() any more. Fixes: cb4bfda62afa ("nvme-pci: fix hot removal during error handling") Signed-off-by: Casey Chen Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 46698cabef81..320051f5a3dd 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3012,7 +3012,6 @@ static void nvme_remove(struct pci_dev *pdev) if (!pci_device_is_present(pdev)) { nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DEAD); nvme_dev_disable(dev, true); - nvme_dev_remove_admin(dev); } flush_work(&dev->ctrl.reset_work); -- cgit v1.2.3-58-ga151 From b98cf55ec0bd88bdba725845c743e94ecaf57b7e Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Mon, 12 Jul 2021 15:35:04 +0100 Subject: firmware: arm_scmi: Fix kernel doc warnings about return values Kernel doc validation script still complains about the following: |No description found for return value of 'scmi_get_protocol_device' |No description found for return value of 'scmi_devm_notifier_register' |No description found for return value of 'scmi_devm_notifier_unregister' Fix adding missing Return kernel-doc statements. Link: https://lore.kernel.org/r/20210712143504.33541-1-cristian.marussi@arm.com Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/driver.c | 2 ++ drivers/firmware/arm_scmi/notify.c | 4 ++++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index 36d80661d473..1cbd2b06e523 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -1138,6 +1138,8 @@ scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id) * @proto_id and @name: if device was still not existent it is created as a * child of the specified SCMI instance @info and its transport properly * initialized as usual. + * + * Return: A properly initialized scmi device, NULL otherwise. */ static inline struct scmi_device * scmi_get_protocol_device(struct device_node *np, struct scmi_info *info, diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c index d860bebd984a..0efd20cd9d69 100644 --- a/drivers/firmware/arm_scmi/notify.c +++ b/drivers/firmware/arm_scmi/notify.c @@ -1457,6 +1457,8 @@ static void scmi_devm_release_notifier(struct device *dev, void *res) * * Generic devres managed helper to register a notifier_block against a * protocol event. + * + * Return: 0 on Success */ static int scmi_devm_notifier_register(struct scmi_device *sdev, u8 proto_id, u8 evt_id, @@ -1523,6 +1525,8 @@ static int scmi_devm_notifier_match(struct device *dev, void *res, void *data) * Generic devres managed helper to explicitly un-register a notifier_block * against a protocol event, which was previously registered using the above * @scmi_devm_notifier_register. + * + * Return: 0 on Success */ static int scmi_devm_notifier_unregister(struct scmi_device *sdev, u8 proto_id, u8 evt_id, -- cgit v1.2.3-58-ga151 From 187a002b07e8089f0b5657eafec50b5d05625569 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Mon, 28 Jun 2021 18:00:42 +0100 Subject: firmware: arm_scmi: Avoid padding in sensor message structure scmi_resp_sensor_reading_complete structure is meant to represent an SCMI asynchronous reading complete message. The readings field with a 64bit type forces padding and breaks reads in scmi_sensor_reading_get. Split it in two adjacent 32bit readings_low/high subfields to avoid the padding within the structure. Alternatively we could to mark the structure packed. Link: https://lore.kernel.org/r/20210628170042.34105-1-cristian.marussi@arm.com Fixes: e2083d3673916 ("firmware: arm_scmi: Add SCMI v3.0 sensors timestamped reads") Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/sensors.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c index 2c88aa221559..308471586381 100644 --- a/drivers/firmware/arm_scmi/sensors.c +++ b/drivers/firmware/arm_scmi/sensors.c @@ -166,7 +166,8 @@ struct scmi_msg_sensor_reading_get { struct scmi_resp_sensor_reading_complete { __le32 id; - __le64 readings; + __le32 readings_low; + __le32 readings_high; }; struct scmi_sensor_reading_resp { @@ -717,7 +718,8 @@ static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph, resp = t->rx.buf; if (le32_to_cpu(resp->id) == sensor_id) - *value = get_unaligned_le64(&resp->readings); + *value = + get_unaligned_le64(&resp->readings_low); else ret = -EPROTO; } -- cgit v1.2.3-58-ga151 From bdb8742dc6f7c599c3d61959234fe4c23638727b Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Mon, 12 Jul 2021 15:18:18 +0100 Subject: firmware: arm_scmi: Fix range check for the maximum number of pending messages SCMI message headers carry a sequence number and such field is sized to allow for MSG_TOKEN_MAX distinct numbers; moreover zero is not really an acceptable maximum number of pending in-flight messages. Fix accordingly the checks performed on the value exported by transports in scmi_desc.max_msg Link: https://lore.kernel.org/r/20210712141833.6628-3-cristian.marussi@arm.com Reported-by: Vincent Guittot Signed-off-by: Cristian Marussi [sudeep.holla: updated the patch title and error message] Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/driver.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index 1cbd2b06e523..9b2e8d42a992 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -1026,8 +1026,9 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo, const struct scmi_desc *desc = sinfo->desc; /* Pre-allocated messages, no more than what hdr.seq can support */ - if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) { - dev_err(dev, "Maximum message of %d exceeds supported %ld\n", + if (WARN_ON(!desc->max_msg || desc->max_msg > MSG_TOKEN_MAX)) { + dev_err(dev, + "Invalid maximum messages %d, not in range [1 - %lu]\n", desc->max_msg, MSG_TOKEN_MAX); return -EINVAL; } -- cgit v1.2.3-58-ga151 From 798c511548b946ae9ec123b0dfe197a5f29e63ec Mon Sep 17 00:00:00 2001 From: Jingwen Chen Date: Thu, 1 Jul 2021 10:19:17 +0800 Subject: drm/amdgpu: SRIOV flr_work should take write_lock [Why] If flr_work takes read_lock, then other threads who takes read_lock can access hardware when host is doing vf flr. [How] flr_work should take write_lock to avoid this case. Signed-off-by: Jingwen Chen Reviewed-by: Monk Liu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c | 4 ++-- drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c index 3ee481557fc9..ff2307d7ee0f 100644 --- a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c +++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c @@ -252,7 +252,7 @@ static void xgpu_ai_mailbox_flr_work(struct work_struct *work) * otherwise the mailbox msg will be ruined/reseted by * the VF FLR. */ - if (!down_read_trylock(&adev->reset_sem)) + if (!down_write_trylock(&adev->reset_sem)) return; amdgpu_virt_fini_data_exchange(adev); @@ -268,7 +268,7 @@ static void xgpu_ai_mailbox_flr_work(struct work_struct *work) flr_done: atomic_set(&adev->in_gpu_reset, 0); - up_read(&adev->reset_sem); + up_write(&adev->reset_sem); /* Trigger recovery for world switch failure if no TDR */ if (amdgpu_device_should_recover_gpu(adev) diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c b/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c index 48e588d3c409..9f7aac435d69 100644 --- a/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c +++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c @@ -273,7 +273,7 @@ static void xgpu_nv_mailbox_flr_work(struct work_struct *work) * otherwise the mailbox msg will be ruined/reseted by * the VF FLR. */ - if (!down_read_trylock(&adev->reset_sem)) + if (!down_write_trylock(&adev->reset_sem)) return; amdgpu_virt_fini_data_exchange(adev); @@ -289,7 +289,7 @@ static void xgpu_nv_mailbox_flr_work(struct work_struct *work) flr_done: atomic_set(&adev->in_gpu_reset, 0); - up_read(&adev->reset_sem); + up_write(&adev->reset_sem); /* Trigger recovery for world switch failure if no TDR */ if (amdgpu_device_should_recover_gpu(adev) -- cgit v1.2.3-58-ga151 From 43a44c5322d1030d8f36ad679307c61f5b4e3716 Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Fri, 2 Jul 2021 18:35:14 -0400 Subject: drm/amdgpu: Return error if no RAS In amdgpu_ras_query_error_count() return an error if the device doesn't support RAS. This prevents that function from having to always set the values of the integer pointers (if set), and thus prevents function side effects--always to have to set values of integers if integer pointers set, regardless of whether RAS is supported or not--with this change this side effect is mitigated. Also, if no pointers are set, don't count, since we've no way of reporting the counts. Also, give this function a kernel-doc. Cc: Alexander Deucher Cc: John Clements Cc: Hawking Zhang Reported-by: Tom Rix Fixes: a46751fbcde505 ("drm/amdgpu: Fix RAS function interface") Signed-off-by: Luben Tuikov Reviewed-by: Alexander Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 49 +++++++++++++++++++++++---------- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h | 6 ++-- 2 files changed, 38 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c index c13b02caf8c3..fc66aca28594 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c @@ -809,7 +809,7 @@ static int amdgpu_ras_enable_all_features(struct amdgpu_device *adev, /* query/inject/cure begin */ int amdgpu_ras_query_error_status(struct amdgpu_device *adev, - struct ras_query_if *info) + struct ras_query_if *info) { struct ras_manager *obj = amdgpu_ras_find_obj(adev, &info->head); struct ras_err_data err_data = {0, 0, 0, NULL}; @@ -1043,17 +1043,32 @@ int amdgpu_ras_error_inject(struct amdgpu_device *adev, return ret; } -/* get the total error counts on all IPs */ -void amdgpu_ras_query_error_count(struct amdgpu_device *adev, - unsigned long *ce_count, - unsigned long *ue_count) +/** + * amdgpu_ras_query_error_count -- Get error counts of all IPs + * adev: pointer to AMD GPU device + * ce_count: pointer to an integer to be set to the count of correctible errors. + * ue_count: pointer to an integer to be set to the count of uncorrectible + * errors. + * + * If set, @ce_count or @ue_count, count and return the corresponding + * error counts in those integer pointers. Return 0 if the device + * supports RAS. Return -EOPNOTSUPP if the device doesn't support RAS. + */ +int amdgpu_ras_query_error_count(struct amdgpu_device *adev, + unsigned long *ce_count, + unsigned long *ue_count) { struct amdgpu_ras *con = amdgpu_ras_get_context(adev); struct ras_manager *obj; unsigned long ce, ue; if (!adev->ras_enabled || !con) - return; + return -EOPNOTSUPP; + + /* Don't count since no reporting. + */ + if (!ce_count && !ue_count) + return 0; ce = 0; ue = 0; @@ -1061,9 +1076,11 @@ void amdgpu_ras_query_error_count(struct amdgpu_device *adev, struct ras_query_if info = { .head = obj->head, }; + int res; - if (amdgpu_ras_query_error_status(adev, &info)) - return; + res = amdgpu_ras_query_error_status(adev, &info); + if (res) + return res; ce += info.ce_count; ue += info.ue_count; @@ -1074,6 +1091,8 @@ void amdgpu_ras_query_error_count(struct amdgpu_device *adev, if (ue_count) *ue_count = ue; + + return 0; } /* query/inject/cure end */ @@ -2137,9 +2156,10 @@ static void amdgpu_ras_counte_dw(struct work_struct *work) /* Cache new values. */ - amdgpu_ras_query_error_count(adev, &ce_count, &ue_count); - atomic_set(&con->ras_ce_count, ce_count); - atomic_set(&con->ras_ue_count, ue_count); + if (amdgpu_ras_query_error_count(adev, &ce_count, &ue_count) == 0) { + atomic_set(&con->ras_ce_count, ce_count); + atomic_set(&con->ras_ue_count, ue_count); + } pm_runtime_mark_last_busy(dev->dev); Out: @@ -2312,9 +2332,10 @@ int amdgpu_ras_late_init(struct amdgpu_device *adev, /* Those are the cached values at init. */ - amdgpu_ras_query_error_count(adev, &ce_count, &ue_count); - atomic_set(&con->ras_ce_count, ce_count); - atomic_set(&con->ras_ue_count, ue_count); + if (amdgpu_ras_query_error_count(adev, &ce_count, &ue_count) == 0) { + atomic_set(&con->ras_ce_count, ce_count); + atomic_set(&con->ras_ue_count, ue_count); + } return 0; cleanup: diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h index 256cea5d34f2..b504ed8c9b50 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h @@ -490,9 +490,9 @@ int amdgpu_ras_request_reset_on_boot(struct amdgpu_device *adev, void amdgpu_ras_resume(struct amdgpu_device *adev); void amdgpu_ras_suspend(struct amdgpu_device *adev); -void amdgpu_ras_query_error_count(struct amdgpu_device *adev, - unsigned long *ce_count, - unsigned long *ue_count); +int amdgpu_ras_query_error_count(struct amdgpu_device *adev, + unsigned long *ce_count, + unsigned long *ue_count); /* error handling functions */ int amdgpu_ras_add_bad_pages(struct amdgpu_device *adev, -- cgit v1.2.3-58-ga151 From e9cfe00ba8bd437da149a3c52712d4a73e249f45 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Wed, 16 Jun 2021 17:11:12 -0400 Subject: drm/amd/display: Fix updating infoframe for DCN3.1 eDP [Why] We're only treating TMDS as a valid target for infoframe updates which results in PSR being unable to transition from state 4 to state 5. [How] Also allow infoframe updates for DCN3.1 - following how we handle this path for earlier ASIC as well. Signed-off-by: Nicholas Kazlauskas Reviewed-by: Eric Yang Acked-by: Rodrigo Siqueira Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c index fc1fc1a4bf8b..836864a5a5dc 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c @@ -390,7 +390,7 @@ void dcn31_update_info_frame(struct pipe_ctx *pipe_ctx) is_hdmi_tmds = dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal); is_dp = dc_is_dp_signal(pipe_ctx->stream->signal); - if (!is_hdmi_tmds) + if (!is_hdmi_tmds && !is_dp) return; if (is_hdmi_tmds) -- cgit v1.2.3-58-ga151 From dce9d910eb9e54c97e830637f4e3383a11bb7556 Mon Sep 17 00:00:00 2001 From: Wesley Chalmers Date: Wed, 16 Jun 2021 16:11:23 -0400 Subject: Revert "drm/amd/display: Always write repeater mode regardless of LTTPR" This reverts commit 2b7605d73b97e2fa28e0817242e66ca968d2a7cb Some displays are not lighting up when put in LTTPR Transparent Mode Signed-off-by: Wesley Chalmers Reviewed-by: Jun Lei Acked-by: Rodrigo Siqueira Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index b8832bdde2bc..6860827159ba 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1620,11 +1620,12 @@ enum dc_status dpcd_configure_lttpr_mode(struct dc_link *link, struct link_train { enum dc_status status = DC_OK; - if (lt_settings->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT) - status = configure_lttpr_mode_non_transparent(link, lt_settings); - else + if (lt_settings->lttpr_mode == LTTPR_MODE_TRANSPARENT) status = configure_lttpr_mode_transparent(link); + else if (lt_settings->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT) + status = configure_lttpr_mode_non_transparent(link, lt_settings); + return status; } -- cgit v1.2.3-58-ga151 From 9849e71ac0793c956883da3ca780484d3a226316 Mon Sep 17 00:00:00 2001 From: Dmytro Laktyushkin Date: Tue, 15 Jun 2021 15:11:31 -0400 Subject: drm/amd/display: remove faulty assert Signed-off-by: Dmytro Laktyushkin Reviewed-by: Wenjing Liu Acked-by: Rodrigo Siqueira Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 6860827159ba..6da226bf11d5 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1785,7 +1785,6 @@ bool perform_link_training_with_retries( link_enc = stream->link_enc; else link_enc = link->link_enc; - ASSERT(link_enc); /* We need to do this before the link training to ensure the idle pattern in SST * mode will be sent right after the link training -- cgit v1.2.3-58-ga151 From 21cf0293d500f198ad886cbdcd3ff65f82b35edf Mon Sep 17 00:00:00 2001 From: Xiaomeng Hou Date: Thu, 1 Jul 2021 14:09:18 +0800 Subject: drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp Since there's nothing special in smu implementation for yellow carp, it's better to reuse the common smu_v13_0 interfaces and drop the specific smu_v13_0_1.c|h files. v2: remove the duplicate register offset and shift mask header files as well. Signed-off-by: Xiaomeng Hou Reviewed-by: Lijo Lazar Reviewed-by: Kevin Wang Signed-off-by: Alex Deucher --- .../drm/amd/include/asic_reg/mp/mp_13_0_1_offset.h | 355 -------------- .../amd/include/asic_reg/mp/mp_13_0_1_sh_mask.h | 531 --------------------- drivers/gpu/drm/amd/pm/inc/smu_v13_0.h | 1 + drivers/gpu/drm/amd/pm/inc/smu_v13_0_1.h | 57 --- drivers/gpu/drm/amd/pm/swsmu/smu13/Makefile | 2 +- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c | 24 + drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_1.c | 311 ------------ .../gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c | 39 +- 8 files changed, 57 insertions(+), 1263 deletions(-) delete mode 100644 drivers/gpu/drm/amd/include/asic_reg/mp/mp_13_0_1_offset.h delete mode 100644 drivers/gpu/drm/amd/include/asic_reg/mp/mp_13_0_1_sh_mask.h delete mode 100644 drivers/gpu/drm/amd/pm/inc/smu_v13_0_1.h delete mode 100644 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_1.c (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/include/asic_reg/mp/mp_13_0_1_offset.h b/drivers/gpu/drm/amd/include/asic_reg/mp/mp_13_0_1_offset.h deleted file mode 100644 index dfacc6b5d89d..000000000000 --- a/drivers/gpu/drm/amd/include/asic_reg/mp/mp_13_0_1_offset.h +++ /dev/null @@ -1,355 +0,0 @@ -/* - * Copyright 2020 Advanced Micro Devices, Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * - */ -#ifndef _mp_13_0_1_OFFSET_HEADER -#define _mp_13_0_1_OFFSET_HEADER - - - -// addressBlock: mp_SmuMp0_SmnDec -// base address: 0x0 -#define regMP0_SMN_C2PMSG_32 0x0060 -#define regMP0_SMN_C2PMSG_32_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_33 0x0061 -#define regMP0_SMN_C2PMSG_33_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_34 0x0062 -#define regMP0_SMN_C2PMSG_34_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_35 0x0063 -#define regMP0_SMN_C2PMSG_35_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_36 0x0064 -#define regMP0_SMN_C2PMSG_36_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_37 0x0065 -#define regMP0_SMN_C2PMSG_37_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_38 0x0066 -#define regMP0_SMN_C2PMSG_38_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_39 0x0067 -#define regMP0_SMN_C2PMSG_39_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_40 0x0068 -#define regMP0_SMN_C2PMSG_40_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_41 0x0069 -#define regMP0_SMN_C2PMSG_41_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_42 0x006a -#define regMP0_SMN_C2PMSG_42_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_43 0x006b -#define regMP0_SMN_C2PMSG_43_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_44 0x006c -#define regMP0_SMN_C2PMSG_44_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_45 0x006d -#define regMP0_SMN_C2PMSG_45_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_46 0x006e -#define regMP0_SMN_C2PMSG_46_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_47 0x006f -#define regMP0_SMN_C2PMSG_47_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_48 0x0070 -#define regMP0_SMN_C2PMSG_48_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_49 0x0071 -#define regMP0_SMN_C2PMSG_49_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_50 0x0072 -#define regMP0_SMN_C2PMSG_50_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_51 0x0073 -#define regMP0_SMN_C2PMSG_51_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_52 0x0074 -#define regMP0_SMN_C2PMSG_52_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_53 0x0075 -#define regMP0_SMN_C2PMSG_53_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_54 0x0076 -#define regMP0_SMN_C2PMSG_54_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_55 0x0077 -#define regMP0_SMN_C2PMSG_55_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_56 0x0078 -#define regMP0_SMN_C2PMSG_56_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_57 0x0079 -#define regMP0_SMN_C2PMSG_57_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_58 0x007a -#define regMP0_SMN_C2PMSG_58_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_59 0x007b -#define regMP0_SMN_C2PMSG_59_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_60 0x007c -#define regMP0_SMN_C2PMSG_60_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_61 0x007d -#define regMP0_SMN_C2PMSG_61_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_62 0x007e -#define regMP0_SMN_C2PMSG_62_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_63 0x007f -#define regMP0_SMN_C2PMSG_63_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_64 0x0080 -#define regMP0_SMN_C2PMSG_64_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_65 0x0081 -#define regMP0_SMN_C2PMSG_65_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_66 0x0082 -#define regMP0_SMN_C2PMSG_66_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_67 0x0083 -#define regMP0_SMN_C2PMSG_67_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_68 0x0084 -#define regMP0_SMN_C2PMSG_68_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_69 0x0085 -#define regMP0_SMN_C2PMSG_69_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_70 0x0086 -#define regMP0_SMN_C2PMSG_70_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_71 0x0087 -#define regMP0_SMN_C2PMSG_71_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_72 0x0088 -#define regMP0_SMN_C2PMSG_72_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_73 0x0089 -#define regMP0_SMN_C2PMSG_73_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_74 0x008a -#define regMP0_SMN_C2PMSG_74_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_75 0x008b -#define regMP0_SMN_C2PMSG_75_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_76 0x008c -#define regMP0_SMN_C2PMSG_76_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_77 0x008d -#define regMP0_SMN_C2PMSG_77_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_78 0x008e -#define regMP0_SMN_C2PMSG_78_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_79 0x008f -#define regMP0_SMN_C2PMSG_79_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_80 0x0090 -#define regMP0_SMN_C2PMSG_80_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_81 0x0091 -#define regMP0_SMN_C2PMSG_81_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_82 0x0092 -#define regMP0_SMN_C2PMSG_82_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_83 0x0093 -#define regMP0_SMN_C2PMSG_83_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_84 0x0094 -#define regMP0_SMN_C2PMSG_84_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_85 0x0095 -#define regMP0_SMN_C2PMSG_85_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_86 0x0096 -#define regMP0_SMN_C2PMSG_86_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_87 0x0097 -#define regMP0_SMN_C2PMSG_87_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_88 0x0098 -#define regMP0_SMN_C2PMSG_88_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_89 0x0099 -#define regMP0_SMN_C2PMSG_89_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_90 0x009a -#define regMP0_SMN_C2PMSG_90_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_91 0x009b -#define regMP0_SMN_C2PMSG_91_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_92 0x009c -#define regMP0_SMN_C2PMSG_92_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_93 0x009d -#define regMP0_SMN_C2PMSG_93_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_94 0x009e -#define regMP0_SMN_C2PMSG_94_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_95 0x009f -#define regMP0_SMN_C2PMSG_95_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_96 0x00a0 -#define regMP0_SMN_C2PMSG_96_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_97 0x00a1 -#define regMP0_SMN_C2PMSG_97_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_98 0x00a2 -#define regMP0_SMN_C2PMSG_98_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_99 0x00a3 -#define regMP0_SMN_C2PMSG_99_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_100 0x00a4 -#define regMP0_SMN_C2PMSG_100_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_101 0x00a5 -#define regMP0_SMN_C2PMSG_101_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_102 0x00a6 -#define regMP0_SMN_C2PMSG_102_BASE_IDX 0 -#define regMP0_SMN_C2PMSG_103 0x00a7 -#define regMP0_SMN_C2PMSG_103_BASE_IDX 0 -#define regMP0_SMN_IH_CREDIT 0x00c1 -#define regMP0_SMN_IH_CREDIT_BASE_IDX 0 -#define regMP0_SMN_IH_SW_INT 0x00c2 -#define regMP0_SMN_IH_SW_INT_BASE_IDX 0 -#define regMP0_SMN_IH_SW_INT_CTRL 0x00c3 -#define regMP0_SMN_IH_SW_INT_CTRL_BASE_IDX 0 - - -// addressBlock: mp_SmuMp1_SmnDec -// base address: 0x0 -#define regMP1_SMN_C2PMSG_32 0x0260 -#define regMP1_SMN_C2PMSG_32_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_33 0x0261 -#define regMP1_SMN_C2PMSG_33_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_34 0x0262 -#define regMP1_SMN_C2PMSG_34_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_35 0x0263 -#define regMP1_SMN_C2PMSG_35_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_36 0x0264 -#define regMP1_SMN_C2PMSG_36_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_37 0x0265 -#define regMP1_SMN_C2PMSG_37_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_38 0x0266 -#define regMP1_SMN_C2PMSG_38_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_39 0x0267 -#define regMP1_SMN_C2PMSG_39_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_40 0x0268 -#define regMP1_SMN_C2PMSG_40_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_41 0x0269 -#define regMP1_SMN_C2PMSG_41_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_42 0x026a -#define regMP1_SMN_C2PMSG_42_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_43 0x026b -#define regMP1_SMN_C2PMSG_43_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_44 0x026c -#define regMP1_SMN_C2PMSG_44_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_45 0x026d -#define regMP1_SMN_C2PMSG_45_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_46 0x026e -#define regMP1_SMN_C2PMSG_46_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_47 0x026f -#define regMP1_SMN_C2PMSG_47_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_48 0x0270 -#define regMP1_SMN_C2PMSG_48_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_49 0x0271 -#define regMP1_SMN_C2PMSG_49_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_50 0x0272 -#define regMP1_SMN_C2PMSG_50_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_51 0x0273 -#define regMP1_SMN_C2PMSG_51_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_52 0x0274 -#define regMP1_SMN_C2PMSG_52_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_53 0x0275 -#define regMP1_SMN_C2PMSG_53_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_54 0x0276 -#define regMP1_SMN_C2PMSG_54_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_55 0x0277 -#define regMP1_SMN_C2PMSG_55_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_56 0x0278 -#define regMP1_SMN_C2PMSG_56_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_57 0x0279 -#define regMP1_SMN_C2PMSG_57_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_58 0x027a -#define regMP1_SMN_C2PMSG_58_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_59 0x027b -#define regMP1_SMN_C2PMSG_59_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_60 0x027c -#define regMP1_SMN_C2PMSG_60_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_61 0x027d -#define regMP1_SMN_C2PMSG_61_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_62 0x027e -#define regMP1_SMN_C2PMSG_62_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_63 0x027f -#define regMP1_SMN_C2PMSG_63_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_64 0x0280 -#define regMP1_SMN_C2PMSG_64_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_65 0x0281 -#define regMP1_SMN_C2PMSG_65_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_66 0x0282 -#define regMP1_SMN_C2PMSG_66_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_67 0x0283 -#define regMP1_SMN_C2PMSG_67_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_68 0x0284 -#define regMP1_SMN_C2PMSG_68_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_69 0x0285 -#define regMP1_SMN_C2PMSG_69_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_70 0x0286 -#define regMP1_SMN_C2PMSG_70_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_71 0x0287 -#define regMP1_SMN_C2PMSG_71_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_72 0x0288 -#define regMP1_SMN_C2PMSG_72_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_73 0x0289 -#define regMP1_SMN_C2PMSG_73_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_74 0x028a -#define regMP1_SMN_C2PMSG_74_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_75 0x028b -#define regMP1_SMN_C2PMSG_75_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_76 0x028c -#define regMP1_SMN_C2PMSG_76_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_77 0x028d -#define regMP1_SMN_C2PMSG_77_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_78 0x028e -#define regMP1_SMN_C2PMSG_78_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_79 0x028f -#define regMP1_SMN_C2PMSG_79_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_80 0x0290 -#define regMP1_SMN_C2PMSG_80_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_81 0x0291 -#define regMP1_SMN_C2PMSG_81_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_82 0x0292 -#define regMP1_SMN_C2PMSG_82_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_83 0x0293 -#define regMP1_SMN_C2PMSG_83_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_84 0x0294 -#define regMP1_SMN_C2PMSG_84_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_85 0x0295 -#define regMP1_SMN_C2PMSG_85_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_86 0x0296 -#define regMP1_SMN_C2PMSG_86_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_87 0x0297 -#define regMP1_SMN_C2PMSG_87_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_88 0x0298 -#define regMP1_SMN_C2PMSG_88_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_89 0x0299 -#define regMP1_SMN_C2PMSG_89_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_90 0x029a -#define regMP1_SMN_C2PMSG_90_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_91 0x029b -#define regMP1_SMN_C2PMSG_91_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_92 0x029c -#define regMP1_SMN_C2PMSG_92_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_93 0x029d -#define regMP1_SMN_C2PMSG_93_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_94 0x029e -#define regMP1_SMN_C2PMSG_94_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_95 0x029f -#define regMP1_SMN_C2PMSG_95_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_96 0x02a0 -#define regMP1_SMN_C2PMSG_96_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_97 0x02a1 -#define regMP1_SMN_C2PMSG_97_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_98 0x02a2 -#define regMP1_SMN_C2PMSG_98_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_99 0x02a3 -#define regMP1_SMN_C2PMSG_99_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_100 0x02a4 -#define regMP1_SMN_C2PMSG_100_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_101 0x02a5 -#define regMP1_SMN_C2PMSG_101_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_102 0x02a6 -#define regMP1_SMN_C2PMSG_102_BASE_IDX 0 -#define regMP1_SMN_C2PMSG_103 0x02a7 -#define regMP1_SMN_C2PMSG_103_BASE_IDX 0 -#define regMP1_SMN_IH_CREDIT 0x02c1 -#define regMP1_SMN_IH_CREDIT_BASE_IDX 0 -#define regMP1_SMN_IH_SW_INT 0x02c2 -#define regMP1_SMN_IH_SW_INT_BASE_IDX 0 -#define regMP1_SMN_IH_SW_INT_CTRL 0x02c3 -#define regMP1_SMN_IH_SW_INT_CTRL_BASE_IDX 0 -#define regMP1_SMN_FPS_CNT 0x02c4 -#define regMP1_SMN_FPS_CNT_BASE_IDX 0 -#define regMP1_SMN_EXT_SCRATCH0 0x0340 -#define regMP1_SMN_EXT_SCRATCH0_BASE_IDX 0 -#define regMP1_SMN_EXT_SCRATCH1 0x0341 -#define regMP1_SMN_EXT_SCRATCH1_BASE_IDX 0 -#define regMP1_SMN_EXT_SCRATCH2 0x0342 -#define regMP1_SMN_EXT_SCRATCH2_BASE_IDX 0 -#define regMP1_SMN_EXT_SCRATCH3 0x0343 -#define regMP1_SMN_EXT_SCRATCH3_BASE_IDX 0 -#define regMP1_SMN_EXT_SCRATCH4 0x0344 -#define regMP1_SMN_EXT_SCRATCH4_BASE_IDX 0 -#define regMP1_SMN_EXT_SCRATCH5 0x0345 -#define regMP1_SMN_EXT_SCRATCH5_BASE_IDX 0 -#define regMP1_SMN_EXT_SCRATCH6 0x0346 -#define regMP1_SMN_EXT_SCRATCH6_BASE_IDX 0 -#define regMP1_SMN_EXT_SCRATCH7 0x0347 -#define regMP1_SMN_EXT_SCRATCH7_BASE_IDX 0 - - -#endif diff --git a/drivers/gpu/drm/amd/include/asic_reg/mp/mp_13_0_1_sh_mask.h b/drivers/gpu/drm/amd/include/asic_reg/mp/mp_13_0_1_sh_mask.h deleted file mode 100644 index 2d5e8b58e693..000000000000 --- a/drivers/gpu/drm/amd/include/asic_reg/mp/mp_13_0_1_sh_mask.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - * Copyright 2020 Advanced Micro Devices, Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * - */ -#ifndef _mp_13_0_1_SH_MASK_HEADER -#define _mp_13_0_1_SH_MASK_HEADER - - -// addressBlock: mp_SmuMp0_SmnDec -//MP0_SMN_C2PMSG_32 -#define MP0_SMN_C2PMSG_32__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_32__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_33 -#define MP0_SMN_C2PMSG_33__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_33__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_34 -#define MP0_SMN_C2PMSG_34__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_34__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_35 -#define MP0_SMN_C2PMSG_35__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_35__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_36 -#define MP0_SMN_C2PMSG_36__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_36__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_37 -#define MP0_SMN_C2PMSG_37__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_37__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_38 -#define MP0_SMN_C2PMSG_38__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_38__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_39 -#define MP0_SMN_C2PMSG_39__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_39__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_40 -#define MP0_SMN_C2PMSG_40__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_40__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_41 -#define MP0_SMN_C2PMSG_41__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_41__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_42 -#define MP0_SMN_C2PMSG_42__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_42__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_43 -#define MP0_SMN_C2PMSG_43__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_43__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_44 -#define MP0_SMN_C2PMSG_44__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_44__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_45 -#define MP0_SMN_C2PMSG_45__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_45__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_46 -#define MP0_SMN_C2PMSG_46__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_46__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_47 -#define MP0_SMN_C2PMSG_47__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_47__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_48 -#define MP0_SMN_C2PMSG_48__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_48__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_49 -#define MP0_SMN_C2PMSG_49__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_49__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_50 -#define MP0_SMN_C2PMSG_50__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_50__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_51 -#define MP0_SMN_C2PMSG_51__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_51__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_52 -#define MP0_SMN_C2PMSG_52__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_52__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_53 -#define MP0_SMN_C2PMSG_53__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_53__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_54 -#define MP0_SMN_C2PMSG_54__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_54__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_55 -#define MP0_SMN_C2PMSG_55__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_55__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_56 -#define MP0_SMN_C2PMSG_56__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_56__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_57 -#define MP0_SMN_C2PMSG_57__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_57__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_58 -#define MP0_SMN_C2PMSG_58__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_58__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_59 -#define MP0_SMN_C2PMSG_59__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_59__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_60 -#define MP0_SMN_C2PMSG_60__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_60__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_61 -#define MP0_SMN_C2PMSG_61__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_61__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_62 -#define MP0_SMN_C2PMSG_62__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_62__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_63 -#define MP0_SMN_C2PMSG_63__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_63__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_64 -#define MP0_SMN_C2PMSG_64__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_64__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_65 -#define MP0_SMN_C2PMSG_65__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_65__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_66 -#define MP0_SMN_C2PMSG_66__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_66__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_67 -#define MP0_SMN_C2PMSG_67__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_67__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_68 -#define MP0_SMN_C2PMSG_68__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_68__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_69 -#define MP0_SMN_C2PMSG_69__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_69__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_70 -#define MP0_SMN_C2PMSG_70__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_70__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_71 -#define MP0_SMN_C2PMSG_71__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_71__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_72 -#define MP0_SMN_C2PMSG_72__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_72__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_73 -#define MP0_SMN_C2PMSG_73__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_73__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_74 -#define MP0_SMN_C2PMSG_74__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_74__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_75 -#define MP0_SMN_C2PMSG_75__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_75__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_76 -#define MP0_SMN_C2PMSG_76__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_76__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_77 -#define MP0_SMN_C2PMSG_77__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_77__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_78 -#define MP0_SMN_C2PMSG_78__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_78__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_79 -#define MP0_SMN_C2PMSG_79__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_79__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_80 -#define MP0_SMN_C2PMSG_80__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_80__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_81 -#define MP0_SMN_C2PMSG_81__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_81__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_82 -#define MP0_SMN_C2PMSG_82__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_82__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_83 -#define MP0_SMN_C2PMSG_83__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_83__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_84 -#define MP0_SMN_C2PMSG_84__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_84__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_85 -#define MP0_SMN_C2PMSG_85__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_85__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_86 -#define MP0_SMN_C2PMSG_86__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_86__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_87 -#define MP0_SMN_C2PMSG_87__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_87__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_88 -#define MP0_SMN_C2PMSG_88__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_88__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_89 -#define MP0_SMN_C2PMSG_89__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_89__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_90 -#define MP0_SMN_C2PMSG_90__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_90__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_91 -#define MP0_SMN_C2PMSG_91__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_91__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_92 -#define MP0_SMN_C2PMSG_92__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_92__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_93 -#define MP0_SMN_C2PMSG_93__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_93__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_94 -#define MP0_SMN_C2PMSG_94__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_94__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_95 -#define MP0_SMN_C2PMSG_95__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_95__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_96 -#define MP0_SMN_C2PMSG_96__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_96__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_97 -#define MP0_SMN_C2PMSG_97__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_97__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_98 -#define MP0_SMN_C2PMSG_98__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_98__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_99 -#define MP0_SMN_C2PMSG_99__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_99__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_100 -#define MP0_SMN_C2PMSG_100__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_100__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_101 -#define MP0_SMN_C2PMSG_101__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_101__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_102 -#define MP0_SMN_C2PMSG_102__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_102__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_C2PMSG_103 -#define MP0_SMN_C2PMSG_103__CONTENT__SHIFT 0x0 -#define MP0_SMN_C2PMSG_103__CONTENT_MASK 0xFFFFFFFFL -//MP0_SMN_IH_CREDIT -#define MP0_SMN_IH_CREDIT__CREDIT_VALUE__SHIFT 0x0 -#define MP0_SMN_IH_CREDIT__CLIENT_ID__SHIFT 0x10 -#define MP0_SMN_IH_CREDIT__CREDIT_VALUE_MASK 0x00000003L -#define MP0_SMN_IH_CREDIT__CLIENT_ID_MASK 0x00FF0000L -//MP0_SMN_IH_SW_INT -#define MP0_SMN_IH_SW_INT__ID__SHIFT 0x0 -#define MP0_SMN_IH_SW_INT__VALID__SHIFT 0x8 -#define MP0_SMN_IH_SW_INT__ID_MASK 0x000000FFL -#define MP0_SMN_IH_SW_INT__VALID_MASK 0x00000100L -//MP0_SMN_IH_SW_INT_CTRL -#define MP0_SMN_IH_SW_INT_CTRL__INT_MASK__SHIFT 0x0 -#define MP0_SMN_IH_SW_INT_CTRL__INT_ACK__SHIFT 0x8 -#define MP0_SMN_IH_SW_INT_CTRL__INT_MASK_MASK 0x00000001L -#define MP0_SMN_IH_SW_INT_CTRL__INT_ACK_MASK 0x00000100L - - -// addressBlock: mp_SmuMp1Pub_CruDec -//MP1_FIRMWARE_FLAGS -#define MP1_FIRMWARE_FLAGS__INTERRUPTS_ENABLED__SHIFT 0x0 -#define MP1_FIRMWARE_FLAGS__RESERVED__SHIFT 0x1 -#define MP1_FIRMWARE_FLAGS__INTERRUPTS_ENABLED_MASK 0x00000001L -#define MP1_FIRMWARE_FLAGS__RESERVED_MASK 0xFFFFFFFEL - - -// addressBlock: mp_SmuMp1_SmnDec -//MP1_SMN_C2PMSG_32 -#define MP1_SMN_C2PMSG_32__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_32__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_33 -#define MP1_SMN_C2PMSG_33__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_33__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_34 -#define MP1_SMN_C2PMSG_34__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_34__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_35 -#define MP1_SMN_C2PMSG_35__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_35__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_36 -#define MP1_SMN_C2PMSG_36__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_36__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_37 -#define MP1_SMN_C2PMSG_37__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_37__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_38 -#define MP1_SMN_C2PMSG_38__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_38__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_39 -#define MP1_SMN_C2PMSG_39__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_39__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_40 -#define MP1_SMN_C2PMSG_40__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_40__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_41 -#define MP1_SMN_C2PMSG_41__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_41__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_42 -#define MP1_SMN_C2PMSG_42__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_42__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_43 -#define MP1_SMN_C2PMSG_43__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_43__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_44 -#define MP1_SMN_C2PMSG_44__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_44__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_45 -#define MP1_SMN_C2PMSG_45__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_45__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_46 -#define MP1_SMN_C2PMSG_46__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_46__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_47 -#define MP1_SMN_C2PMSG_47__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_47__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_48 -#define MP1_SMN_C2PMSG_48__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_48__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_49 -#define MP1_SMN_C2PMSG_49__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_49__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_50 -#define MP1_SMN_C2PMSG_50__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_50__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_51 -#define MP1_SMN_C2PMSG_51__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_51__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_52 -#define MP1_SMN_C2PMSG_52__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_52__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_53 -#define MP1_SMN_C2PMSG_53__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_53__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_54 -#define MP1_SMN_C2PMSG_54__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_54__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_55 -#define MP1_SMN_C2PMSG_55__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_55__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_56 -#define MP1_SMN_C2PMSG_56__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_56__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_57 -#define MP1_SMN_C2PMSG_57__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_57__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_58 -#define MP1_SMN_C2PMSG_58__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_58__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_59 -#define MP1_SMN_C2PMSG_59__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_59__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_60 -#define MP1_SMN_C2PMSG_60__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_60__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_61 -#define MP1_SMN_C2PMSG_61__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_61__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_62 -#define MP1_SMN_C2PMSG_62__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_62__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_63 -#define MP1_SMN_C2PMSG_63__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_63__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_64 -#define MP1_SMN_C2PMSG_64__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_64__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_65 -#define MP1_SMN_C2PMSG_65__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_65__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_66 -#define MP1_SMN_C2PMSG_66__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_66__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_67 -#define MP1_SMN_C2PMSG_67__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_67__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_68 -#define MP1_SMN_C2PMSG_68__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_68__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_69 -#define MP1_SMN_C2PMSG_69__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_69__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_70 -#define MP1_SMN_C2PMSG_70__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_70__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_71 -#define MP1_SMN_C2PMSG_71__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_71__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_72 -#define MP1_SMN_C2PMSG_72__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_72__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_73 -#define MP1_SMN_C2PMSG_73__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_73__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_74 -#define MP1_SMN_C2PMSG_74__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_74__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_75 -#define MP1_SMN_C2PMSG_75__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_75__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_76 -#define MP1_SMN_C2PMSG_76__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_76__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_77 -#define MP1_SMN_C2PMSG_77__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_77__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_78 -#define MP1_SMN_C2PMSG_78__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_78__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_79 -#define MP1_SMN_C2PMSG_79__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_79__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_80 -#define MP1_SMN_C2PMSG_80__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_80__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_81 -#define MP1_SMN_C2PMSG_81__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_81__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_82 -#define MP1_SMN_C2PMSG_82__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_82__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_83 -#define MP1_SMN_C2PMSG_83__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_83__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_84 -#define MP1_SMN_C2PMSG_84__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_84__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_85 -#define MP1_SMN_C2PMSG_85__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_85__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_86 -#define MP1_SMN_C2PMSG_86__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_86__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_87 -#define MP1_SMN_C2PMSG_87__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_87__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_88 -#define MP1_SMN_C2PMSG_88__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_88__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_89 -#define MP1_SMN_C2PMSG_89__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_89__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_90 -#define MP1_SMN_C2PMSG_90__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_90__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_91 -#define MP1_SMN_C2PMSG_91__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_91__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_92 -#define MP1_SMN_C2PMSG_92__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_92__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_93 -#define MP1_SMN_C2PMSG_93__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_93__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_94 -#define MP1_SMN_C2PMSG_94__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_94__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_95 -#define MP1_SMN_C2PMSG_95__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_95__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_96 -#define MP1_SMN_C2PMSG_96__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_96__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_97 -#define MP1_SMN_C2PMSG_97__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_97__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_98 -#define MP1_SMN_C2PMSG_98__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_98__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_99 -#define MP1_SMN_C2PMSG_99__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_99__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_100 -#define MP1_SMN_C2PMSG_100__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_100__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_101 -#define MP1_SMN_C2PMSG_101__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_101__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_102 -#define MP1_SMN_C2PMSG_102__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_102__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_C2PMSG_103 -#define MP1_SMN_C2PMSG_103__CONTENT__SHIFT 0x0 -#define MP1_SMN_C2PMSG_103__CONTENT_MASK 0xFFFFFFFFL -//MP1_SMN_IH_CREDIT -#define MP1_SMN_IH_CREDIT__CREDIT_VALUE__SHIFT 0x0 -#define MP1_SMN_IH_CREDIT__CLIENT_ID__SHIFT 0x10 -#define MP1_SMN_IH_CREDIT__CREDIT_VALUE_MASK 0x00000003L -#define MP1_SMN_IH_CREDIT__CLIENT_ID_MASK 0x00FF0000L -//MP1_SMN_IH_SW_INT -#define MP1_SMN_IH_SW_INT__ID__SHIFT 0x0 -#define MP1_SMN_IH_SW_INT__VALID__SHIFT 0x8 -#define MP1_SMN_IH_SW_INT__ID_MASK 0x000000FFL -#define MP1_SMN_IH_SW_INT__VALID_MASK 0x00000100L -//MP1_SMN_IH_SW_INT_CTRL -#define MP1_SMN_IH_SW_INT_CTRL__INT_MASK__SHIFT 0x0 -#define MP1_SMN_IH_SW_INT_CTRL__INT_ACK__SHIFT 0x8 -#define MP1_SMN_IH_SW_INT_CTRL__INT_MASK_MASK 0x00000001L -#define MP1_SMN_IH_SW_INT_CTRL__INT_ACK_MASK 0x00000100L -//MP1_SMN_FPS_CNT -#define MP1_SMN_FPS_CNT__COUNT__SHIFT 0x0 -#define MP1_SMN_FPS_CNT__COUNT_MASK 0xFFFFFFFFL -//MP1_SMN_EXT_SCRATCH0 -#define MP1_SMN_EXT_SCRATCH0__DATA__SHIFT 0x0 -#define MP1_SMN_EXT_SCRATCH0__DATA_MASK 0xFFFFFFFFL -//MP1_SMN_EXT_SCRATCH1 -#define MP1_SMN_EXT_SCRATCH1__DATA__SHIFT 0x0 -#define MP1_SMN_EXT_SCRATCH1__DATA_MASK 0xFFFFFFFFL -//MP1_SMN_EXT_SCRATCH2 -#define MP1_SMN_EXT_SCRATCH2__DATA__SHIFT 0x0 -#define MP1_SMN_EXT_SCRATCH2__DATA_MASK 0xFFFFFFFFL -//MP1_SMN_EXT_SCRATCH3 -#define MP1_SMN_EXT_SCRATCH3__DATA__SHIFT 0x0 -#define MP1_SMN_EXT_SCRATCH3__DATA_MASK 0xFFFFFFFFL -//MP1_SMN_EXT_SCRATCH4 -#define MP1_SMN_EXT_SCRATCH4__DATA__SHIFT 0x0 -#define MP1_SMN_EXT_SCRATCH4__DATA_MASK 0xFFFFFFFFL -//MP1_SMN_EXT_SCRATCH5 -#define MP1_SMN_EXT_SCRATCH5__DATA__SHIFT 0x0 -#define MP1_SMN_EXT_SCRATCH5__DATA_MASK 0xFFFFFFFFL -//MP1_SMN_EXT_SCRATCH6 -#define MP1_SMN_EXT_SCRATCH6__DATA__SHIFT 0x0 -#define MP1_SMN_EXT_SCRATCH6__DATA_MASK 0xFFFFFFFFL -//MP1_SMN_EXT_SCRATCH7 -#define MP1_SMN_EXT_SCRATCH7__DATA__SHIFT 0x0 -#define MP1_SMN_EXT_SCRATCH7__DATA_MASK 0xFFFFFFFFL - - -#endif diff --git a/drivers/gpu/drm/amd/pm/inc/smu_v13_0.h b/drivers/gpu/drm/amd/pm/inc/smu_v13_0.h index 6119a36b2cba..3fea2430dec0 100644 --- a/drivers/gpu/drm/amd/pm/inc/smu_v13_0.h +++ b/drivers/gpu/drm/amd/pm/inc/smu_v13_0.h @@ -26,6 +26,7 @@ #include "amdgpu_smu.h" #define SMU13_DRIVER_IF_VERSION_INV 0xFFFFFFFF +#define SMU13_DRIVER_IF_VERSION_YELLOW_CARP 0x03 #define SMU13_DRIVER_IF_VERSION_ALDE 0x07 /* MP Apertures */ diff --git a/drivers/gpu/drm/amd/pm/inc/smu_v13_0_1.h b/drivers/gpu/drm/amd/pm/inc/smu_v13_0_1.h deleted file mode 100644 index b6c976a4d578..000000000000 --- a/drivers/gpu/drm/amd/pm/inc/smu_v13_0_1.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2020 Advanced Micro Devices, Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - */ -#ifndef __SMU_V13_0_1_H__ -#define __SMU_V13_0_1_H__ - -#include "amdgpu_smu.h" - -#define SMU13_0_1_DRIVER_IF_VERSION_INV 0xFFFFFFFF -#define SMU13_0_1_DRIVER_IF_VERSION_YELLOW_CARP 0x3 - -/* MP Apertures */ -#define MP0_Public 0x03800000 -#define MP0_SRAM 0x03900000 -#define MP1_Public 0x03b00000 -#define MP1_SRAM 0x03c00004 - -/* address block */ -#define smnMP1_FIRMWARE_FLAGS 0x3010024 - - -#if defined(SWSMU_CODE_LAYER_L2) || defined(SWSMU_CODE_LAYER_L3) - -int smu_v13_0_1_check_fw_status(struct smu_context *smu); - -int smu_v13_0_1_check_fw_version(struct smu_context *smu); - -int smu_v13_0_1_fini_smc_tables(struct smu_context *smu); - -int smu_v13_0_1_get_vbios_bootup_values(struct smu_context *smu); - -int smu_v13_0_1_set_default_dpm_tables(struct smu_context *smu); - -int smu_v13_0_1_set_driver_table_location(struct smu_context *smu); - -int smu_v13_0_1_gfx_off_control(struct smu_context *smu, bool enable); -#endif -#endif diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/Makefile b/drivers/gpu/drm/amd/pm/swsmu/smu13/Makefile index 9b3a8503f5cd..d4c4c495762c 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/Makefile +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/Makefile @@ -23,7 +23,7 @@ # Makefile for the 'smu manager' sub-component of powerplay. # It provides the smu management services for the driver. -SMU13_MGR = smu_v13_0.o aldebaran_ppt.o smu_v13_0_1.o yellow_carp_ppt.o +SMU13_MGR = smu_v13_0.o aldebaran_ppt.o yellow_carp_ppt.o AMD_SWSMU_SMU13MGR = $(addprefix $(AMD_SWSMU_PATH)/smu13/,$(SMU13_MGR)) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c index a3dc7194aaf8..a421ba85bd6d 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c @@ -210,6 +210,9 @@ int smu_v13_0_check_fw_version(struct smu_context *smu) case CHIP_ALDEBARAN: smu->smc_driver_if_version = SMU13_DRIVER_IF_VERSION_ALDE; break; + case CHIP_YELLOW_CARP: + smu->smc_driver_if_version = SMU13_DRIVER_IF_VERSION_YELLOW_CARP; + break; default: dev_err(smu->adev->dev, "smu unsupported asic type:%d.\n", smu->adev->asic_type); smu->smc_driver_if_version = SMU13_DRIVER_IF_VERSION_INV; @@ -694,6 +697,27 @@ failed: return ret; } +int smu_v13_0_gfx_off_control(struct smu_context *smu, bool enable) +{ + int ret = 0; + struct amdgpu_device *adev = smu->adev; + + switch (adev->asic_type) { + case CHIP_YELLOW_CARP: + if (!(adev->pm.pp_feature & PP_GFXOFF_MASK)) + return 0; + if (enable) + ret = smu_cmn_send_smc_msg(smu, SMU_MSG_AllowGfxOff, NULL); + else + ret = smu_cmn_send_smc_msg(smu, SMU_MSG_DisallowGfxOff, NULL); + break; + default: + break; + } + + return ret; +} + int smu_v13_0_system_features_control(struct smu_context *smu, bool en) { diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_1.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_1.c deleted file mode 100644 index 61917b49f2bf..000000000000 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_1.c +++ /dev/null @@ -1,311 +0,0 @@ -/* - * Copyright 2020 Advanced Micro Devices, Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -//#include - -#define SWSMU_CODE_LAYER_L3 - -#include "amdgpu.h" -#include "amdgpu_smu.h" -#include "smu_v13_0_1.h" -#include "soc15_common.h" -#include "smu_cmn.h" -#include "atomfirmware.h" -#include "amdgpu_atomfirmware.h" -#include "amdgpu_atombios.h" -#include "atom.h" - -#include "asic_reg/mp/mp_13_0_1_offset.h" -#include "asic_reg/mp/mp_13_0_1_sh_mask.h" - -/* - * DO NOT use these for err/warn/info/debug messages. - * Use dev_err, dev_warn, dev_info and dev_dbg instead. - * They are more MGPU friendly. - */ -#undef pr_err -#undef pr_warn -#undef pr_info -#undef pr_debug - -int smu_v13_0_1_check_fw_status(struct smu_context *smu) -{ - struct amdgpu_device *adev = smu->adev; - uint32_t mp1_fw_flags; - - mp1_fw_flags = RREG32_PCIE(MP1_Public | - (smnMP1_FIRMWARE_FLAGS & 0xffffffff)); - - if ((mp1_fw_flags & MP1_FIRMWARE_FLAGS__INTERRUPTS_ENABLED_MASK) >> - MP1_FIRMWARE_FLAGS__INTERRUPTS_ENABLED__SHIFT) - return 0; - - return -EIO; -} - -int smu_v13_0_1_check_fw_version(struct smu_context *smu) -{ - uint32_t if_version = 0xff, smu_version = 0xff; - uint16_t smu_major; - uint8_t smu_minor, smu_debug; - int ret = 0; - - ret = smu_cmn_get_smc_version(smu, &if_version, &smu_version); - if (ret) - return ret; - - smu_major = (smu_version >> 16) & 0xffff; - smu_minor = (smu_version >> 8) & 0xff; - smu_debug = (smu_version >> 0) & 0xff; - - switch (smu->adev->asic_type) { - case CHIP_YELLOW_CARP: - smu->smc_driver_if_version = SMU13_0_1_DRIVER_IF_VERSION_YELLOW_CARP; - break; - - default: - dev_err(smu->adev->dev, "smu unsupported asic type:%d.\n", smu->adev->asic_type); - smu->smc_driver_if_version = SMU13_0_1_DRIVER_IF_VERSION_INV; - break; - } - - dev_info(smu->adev->dev, "smu fw reported version = 0x%08x (%d.%d.%d)\n", - smu_version, smu_major, smu_minor, smu_debug); - - /* - * 1. if_version mismatch is not critical as our fw is designed - * to be backward compatible. - * 2. New fw usually brings some optimizations. But that's visible - * only on the paired driver. - * Considering above, we just leave user a warning message instead - * of halt driver loading. - */ - if (if_version != smu->smc_driver_if_version) { - dev_info(smu->adev->dev, "smu driver if version = 0x%08x, smu fw if version = 0x%08x, " - "smu fw version = 0x%08x (%d.%d.%d)\n", - smu->smc_driver_if_version, if_version, - smu_version, smu_major, smu_minor, smu_debug); - dev_warn(smu->adev->dev, "SMU driver if version not matched\n"); - } - - return ret; -} - -int smu_v13_0_1_fini_smc_tables(struct smu_context *smu) -{ - struct smu_table_context *smu_table = &smu->smu_table; - - kfree(smu_table->clocks_table); - smu_table->clocks_table = NULL; - - kfree(smu_table->metrics_table); - smu_table->metrics_table = NULL; - - kfree(smu_table->watermarks_table); - smu_table->watermarks_table = NULL; - - return 0; -} - -static int smu_v13_0_1_atom_get_smu_clockinfo(struct amdgpu_device *adev, - uint8_t clk_id, - uint8_t syspll_id, - uint32_t *clk_freq) -{ - struct atom_get_smu_clock_info_parameters_v3_1 input = {0}; - struct atom_get_smu_clock_info_output_parameters_v3_1 *output; - int ret, index; - - input.clk_id = clk_id; - input.syspll_id = syspll_id; - input.command = GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ; - index = get_index_into_master_table(atom_master_list_of_command_functions_v2_1, - getsmuclockinfo); - - ret = amdgpu_atom_execute_table(adev->mode_info.atom_context, index, - (uint32_t *)&input); - if (ret) - return -EINVAL; - - output = (struct atom_get_smu_clock_info_output_parameters_v3_1 *)&input; - *clk_freq = le32_to_cpu(output->atom_smu_outputclkfreq.smu_clock_freq_hz) / 10000; - - return 0; -} - -int smu_v13_0_1_get_vbios_bootup_values(struct smu_context *smu) -{ - int ret, index; - uint16_t size; - uint8_t frev, crev; - struct atom_common_table_header *header; - struct atom_firmware_info_v3_4 *v_3_4; - struct atom_firmware_info_v3_3 *v_3_3; - struct atom_firmware_info_v3_1 *v_3_1; - - index = get_index_into_master_table(atom_master_list_of_data_tables_v2_1, - firmwareinfo); - - ret = amdgpu_atombios_get_data_table(smu->adev, index, &size, &frev, &crev, - (uint8_t **)&header); - if (ret) - return ret; - - if (header->format_revision != 3) { - dev_err(smu->adev->dev, "unknown atom_firmware_info version! for smu13\n"); - return -EINVAL; - } - - switch (header->content_revision) { - case 0: - case 1: - case 2: - v_3_1 = (struct atom_firmware_info_v3_1 *)header; - smu->smu_table.boot_values.revision = v_3_1->firmware_revision; - smu->smu_table.boot_values.gfxclk = v_3_1->bootup_sclk_in10khz; - smu->smu_table.boot_values.uclk = v_3_1->bootup_mclk_in10khz; - smu->smu_table.boot_values.socclk = 0; - smu->smu_table.boot_values.dcefclk = 0; - smu->smu_table.boot_values.vddc = v_3_1->bootup_vddc_mv; - smu->smu_table.boot_values.vddci = v_3_1->bootup_vddci_mv; - smu->smu_table.boot_values.mvddc = v_3_1->bootup_mvddc_mv; - smu->smu_table.boot_values.vdd_gfx = v_3_1->bootup_vddgfx_mv; - smu->smu_table.boot_values.cooling_id = v_3_1->coolingsolution_id; - break; - case 3: - v_3_3 = (struct atom_firmware_info_v3_3 *)header; - smu->smu_table.boot_values.revision = v_3_3->firmware_revision; - smu->smu_table.boot_values.gfxclk = v_3_3->bootup_sclk_in10khz; - smu->smu_table.boot_values.uclk = v_3_3->bootup_mclk_in10khz; - smu->smu_table.boot_values.socclk = 0; - smu->smu_table.boot_values.dcefclk = 0; - smu->smu_table.boot_values.vddc = v_3_3->bootup_vddc_mv; - smu->smu_table.boot_values.vddci = v_3_3->bootup_vddci_mv; - smu->smu_table.boot_values.mvddc = v_3_3->bootup_mvddc_mv; - smu->smu_table.boot_values.vdd_gfx = v_3_3->bootup_vddgfx_mv; - smu->smu_table.boot_values.cooling_id = v_3_3->coolingsolution_id; - break; - case 4: - default: - v_3_4 = (struct atom_firmware_info_v3_4 *)header; - smu->smu_table.boot_values.revision = v_3_4->firmware_revision; - smu->smu_table.boot_values.gfxclk = v_3_4->bootup_sclk_in10khz; - smu->smu_table.boot_values.uclk = v_3_4->bootup_mclk_in10khz; - smu->smu_table.boot_values.socclk = 0; - smu->smu_table.boot_values.dcefclk = 0; - smu->smu_table.boot_values.vddc = v_3_4->bootup_vddc_mv; - smu->smu_table.boot_values.vddci = v_3_4->bootup_vddci_mv; - smu->smu_table.boot_values.mvddc = v_3_4->bootup_mvddc_mv; - smu->smu_table.boot_values.vdd_gfx = v_3_4->bootup_vddgfx_mv; - smu->smu_table.boot_values.cooling_id = v_3_4->coolingsolution_id; - break; - } - - smu->smu_table.boot_values.format_revision = header->format_revision; - smu->smu_table.boot_values.content_revision = header->content_revision; - - smu_v13_0_1_atom_get_smu_clockinfo(smu->adev, - (uint8_t)SMU11_SYSPLL0_SOCCLK_ID, - (uint8_t)0, - &smu->smu_table.boot_values.socclk); - - smu_v13_0_1_atom_get_smu_clockinfo(smu->adev, - (uint8_t)SMU11_SYSPLL0_DCEFCLK_ID, - (uint8_t)0, - &smu->smu_table.boot_values.dcefclk); - - smu_v13_0_1_atom_get_smu_clockinfo(smu->adev, - (uint8_t)SMU11_SYSPLL0_ECLK_ID, - (uint8_t)0, - &smu->smu_table.boot_values.eclk); - - smu_v13_0_1_atom_get_smu_clockinfo(smu->adev, - (uint8_t)SMU11_SYSPLL0_VCLK_ID, - (uint8_t)0, - &smu->smu_table.boot_values.vclk); - - smu_v13_0_1_atom_get_smu_clockinfo(smu->adev, - (uint8_t)SMU11_SYSPLL0_DCLK_ID, - (uint8_t)0, - &smu->smu_table.boot_values.dclk); - - if ((smu->smu_table.boot_values.format_revision == 3) && - (smu->smu_table.boot_values.content_revision >= 2)) - smu_v13_0_1_atom_get_smu_clockinfo(smu->adev, - (uint8_t)SMU11_SYSPLL1_0_FCLK_ID, - (uint8_t)SMU11_SYSPLL1_2_ID, - &smu->smu_table.boot_values.fclk); - - return 0; -} - -int smu_v13_0_1_set_default_dpm_tables(struct smu_context *smu) -{ - struct smu_table_context *smu_table = &smu->smu_table; - - return smu_cmn_update_table(smu, SMU_TABLE_DPMCLOCKS, 0, smu_table->clocks_table, false); -} - -int smu_v13_0_1_set_driver_table_location(struct smu_context *smu) -{ - struct smu_table *driver_table = &smu->smu_table.driver_table; - int ret = 0; - - if (!driver_table->mc_address) - return 0; - - ret = smu_cmn_send_smc_msg_with_param(smu, - SMU_MSG_SetDriverDramAddrHigh, - upper_32_bits(driver_table->mc_address), - NULL); - - if (ret) - return ret; - - ret = smu_cmn_send_smc_msg_with_param(smu, - SMU_MSG_SetDriverDramAddrLow, - lower_32_bits(driver_table->mc_address), - NULL); - - return ret; -} - -int smu_v13_0_1_gfx_off_control(struct smu_context *smu, bool enable) -{ - int ret = 0; - struct amdgpu_device *adev = smu->adev; - - switch (adev->asic_type) { - case CHIP_YELLOW_CARP: - if (!(adev->pm.pp_feature & PP_GFXOFF_MASK)) - return 0; - if (enable) - ret = smu_cmn_send_smc_msg(smu, SMU_MSG_AllowGfxOff, NULL); - else - ret = smu_cmn_send_smc_msg(smu, SMU_MSG_DisallowGfxOff, NULL); - break; - default: - break; - } - - return ret; -} diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c index 18a1ffdca227..de92f713a911 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c @@ -25,7 +25,7 @@ #include "amdgpu.h" #include "amdgpu_smu.h" -#include "smu_v13_0_1.h" +#include "smu_v13_0.h" #include "smu13_driver_if_yellow_carp.h" #include "yellow_carp_ppt.h" #include "smu_v13_0_1_ppsmc.h" @@ -186,6 +186,22 @@ err0_out: return -ENOMEM; } +static int yellow_carp_fini_smc_tables(struct smu_context *smu) +{ + struct smu_table_context *smu_table = &smu->smu_table; + + kfree(smu_table->clocks_table); + smu_table->clocks_table = NULL; + + kfree(smu_table->metrics_table); + smu_table->metrics_table = NULL; + + kfree(smu_table->watermarks_table); + smu_table->watermarks_table = NULL; + + return 0; +} + static int yellow_carp_system_features_control(struct smu_context *smu, bool en) { struct smu_feature *feature = &smu->smu_feature; @@ -659,6 +675,13 @@ static ssize_t yellow_carp_get_gpu_metrics(struct smu_context *smu, return sizeof(struct gpu_metrics_v2_1); } +static int yellow_carp_set_default_dpm_tables(struct smu_context *smu) +{ + struct smu_table_context *smu_table = &smu->smu_table; + + return smu_cmn_update_table(smu, SMU_TABLE_DPMCLOCKS, 0, smu_table->clocks_table, false); +} + static int yellow_carp_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TABLE_COMMAND type, long input[], uint32_t size) { @@ -1203,17 +1226,17 @@ static int yellow_carp_set_fine_grain_gfx_freq_parameters(struct smu_context *sm } static const struct pptable_funcs yellow_carp_ppt_funcs = { - .check_fw_status = smu_v13_0_1_check_fw_status, - .check_fw_version = smu_v13_0_1_check_fw_version, + .check_fw_status = smu_v13_0_check_fw_status, + .check_fw_version = smu_v13_0_check_fw_version, .init_smc_tables = yellow_carp_init_smc_tables, - .fini_smc_tables = smu_v13_0_1_fini_smc_tables, - .get_vbios_bootup_values = smu_v13_0_1_get_vbios_bootup_values, + .fini_smc_tables = yellow_carp_fini_smc_tables, + .get_vbios_bootup_values = smu_v13_0_get_vbios_bootup_values, .system_features_control = yellow_carp_system_features_control, .send_smc_msg_with_param = smu_cmn_send_smc_msg_with_param, .send_smc_msg = smu_cmn_send_smc_msg, .dpm_set_vcn_enable = yellow_carp_dpm_set_vcn_enable, .dpm_set_jpeg_enable = yellow_carp_dpm_set_jpeg_enable, - .set_default_dpm_table = smu_v13_0_1_set_default_dpm_tables, + .set_default_dpm_table = yellow_carp_set_default_dpm_tables, .read_sensor = yellow_carp_read_sensor, .is_dpm_running = yellow_carp_is_dpm_running, .set_watermarks_table = yellow_carp_set_watermarks_table, @@ -1222,8 +1245,8 @@ static const struct pptable_funcs yellow_carp_ppt_funcs = { .get_gpu_metrics = yellow_carp_get_gpu_metrics, .get_enabled_mask = smu_cmn_get_enabled_32_bits_mask, .get_pp_feature_mask = smu_cmn_get_pp_feature_mask, - .set_driver_table_location = smu_v13_0_1_set_driver_table_location, - .gfx_off_control = smu_v13_0_1_gfx_off_control, + .set_driver_table_location = smu_v13_0_set_driver_table_location, + .gfx_off_control = smu_v13_0_gfx_off_control, .post_init = yellow_carp_post_smu_init, .mode2_reset = yellow_carp_mode2_reset, .get_dpm_ultimate_freq = yellow_carp_get_dpm_ultimate_freq, -- cgit v1.2.3-58-ga151 From 834b8245d6bbd57900ca6c79d7f9e0279a8d51c2 Mon Sep 17 00:00:00 2001 From: Xiaomeng Hou Date: Wed, 7 Jul 2021 16:50:01 +0800 Subject: drm/amd/display: update header file name Update the register header file name. Signed-off-by: Xiaomeng Hou Reviewed-by: Aaron Liu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c index 66db5e988bc1..dad4a4c18bcf 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c @@ -31,8 +31,8 @@ #include "dcn31_smu.h" #include "yellow_carp_offset.h" -#include "mp/mp_13_0_1_offset.h" -#include "mp/mp_13_0_1_sh_mask.h" +#include "mp/mp_13_0_2_offset.h" +#include "mp/mp_13_0_2_sh_mask.h" #define REG(reg_name) \ (MP0_BASE.instance[0].segment[reg ## reg_name ## _BASE_IDX] + reg ## reg_name) -- cgit v1.2.3-58-ga151 From fa8f311e9e3aa1d41f31f8b28f975c65f0b25c03 Mon Sep 17 00:00:00 2001 From: Emily Deng Date: Tue, 12 May 2020 18:27:21 +0800 Subject: drm/amdgpu: Correct the irq numbers for virtual crtc The irq number should be decided by num_crtc, and the num_crtc could change by parameter. Signed-off-by: Emily Deng Reviewed by: Monk Liu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/dce_virtual.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c index 33324427b555..7e0d8c092c7e 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c @@ -766,7 +766,7 @@ static const struct amdgpu_irq_src_funcs dce_virtual_crtc_irq_funcs = { static void dce_virtual_set_irq_funcs(struct amdgpu_device *adev) { - adev->crtc_irq.num_types = AMDGPU_CRTC_IRQ_VBLANK6 + 1; + adev->crtc_irq.num_types = adev->mode_info.num_crtc; adev->crtc_irq.funcs = &dce_virtual_crtc_irq_funcs; } -- cgit v1.2.3-58-ga151 From 5017bf8214d929f6ff45c46ec21cd3c1bfc03dad Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Wed, 7 Jul 2021 12:42:34 -0400 Subject: drm/amdkfd: handle fault counters on invalid address prange is NULL if vm fault retry on invalid address, for this case, can not use prange to get pdd, use adev to get gpuidx and then get pdd instead, then increase pdd vm fault counter. Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c index 9a71d8919bd6..c7b364e4a287 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c @@ -2375,21 +2375,27 @@ static bool svm_range_skip_recover(struct svm_range *prange) static void svm_range_count_fault(struct amdgpu_device *adev, struct kfd_process *p, - struct svm_range *prange, int32_t gpuidx) + int32_t gpuidx) { struct kfd_process_device *pdd; - if (gpuidx == MAX_GPU_INSTANCE) - /* fault is on different page of same range - * or fault is skipped to recover later - */ - pdd = svm_range_get_pdd_by_adev(prange, adev); - else - /* fault recovered - * or fault cannot recover because GPU no access on the range - */ - pdd = kfd_process_device_from_gpuidx(p, gpuidx); + /* fault is on different page of same range + * or fault is skipped to recover later + * or fault is on invalid virtual address + */ + if (gpuidx == MAX_GPU_INSTANCE) { + uint32_t gpuid; + int r; + r = kfd_process_gpuid_from_kgd(p, adev, &gpuid, &gpuidx); + if (r < 0) + return; + } + + /* fault is recovered + * or fault cannot recover because GPU no access on the range + */ + pdd = kfd_process_device_from_gpuidx(p, gpuidx); if (pdd) WRITE_ONCE(pdd->faults, pdd->faults + 1); } @@ -2525,7 +2531,7 @@ out_unlock_svms: mutex_unlock(&svms->lock); mmap_read_unlock(mm); - svm_range_count_fault(adev, p, prange, gpuidx); + svm_range_count_fault(adev, p, gpuidx); mmput(mm); out: -- cgit v1.2.3-58-ga151 From c010efb7f0bc0c3cb2cd26b000f71d4bd0c427cd Mon Sep 17 00:00:00 2001 From: Zhan Liu Date: Thu, 8 Jul 2021 00:51:52 -0400 Subject: drm/amdgpu/display - only update eDP's backlight level when necessary [Why] The original logic is to update eDP's backlight level on every amdgpu dm atomic commit, which causes excessive DMUB write. As a result, when playing game or moving window around, DMUB timeout and system lagging are observed. [How] We only need to update eDP's backlight level when current level doesn't match requested level. Signed-off-by: Zhan Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 01e1062dc235..d3a2a5ff57e9 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -9191,7 +9191,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) #if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \ defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) /* restore the backlight level */ - if (dm->backlight_dev) + if (dm->backlight_dev && (amdgpu_dm_backlight_get_level(dm) != dm->brightness[0])) amdgpu_dm_backlight_set_level(dm, dm->brightness[0]); #endif /* -- cgit v1.2.3-58-ga151 From 99e7d65cccc8f54581eb961a50da676b79c966d0 Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Wed, 7 Jul 2021 17:55:55 -0400 Subject: drm/amdkfd: Allow CPU access for all VRAM BOs The thunk needs to mmap all BOs for CPU access to allow the debugger to access them. Invisible ones are mapped with PROT_NONE. Fixes: 71df0368e9b6 ("drm/amdgpu: Implement mmap as GEM object function") Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c index 3b8e1ee8c475..eb82739b3080 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c @@ -1393,8 +1393,7 @@ int amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu( domain = alloc_domain = AMDGPU_GEM_DOMAIN_VRAM; alloc_flags = AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE; alloc_flags |= (flags & KFD_IOC_ALLOC_MEM_FLAGS_PUBLIC) ? - AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED : - AMDGPU_GEM_CREATE_NO_CPU_ACCESS; + AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED : 0; } else if (flags & KFD_IOC_ALLOC_MEM_FLAGS_GTT) { domain = alloc_domain = AMDGPU_GEM_DOMAIN_GTT; alloc_flags = 0; -- cgit v1.2.3-58-ga151 From 9be26ddf88de5621f071a1e4f7725ce1015b5036 Mon Sep 17 00:00:00 2001 From: "Emily.Deng" Date: Thu, 1 Oct 2020 12:41:50 +0800 Subject: drm/amdgpu: Restore msix after FLR After FLR, the msix will be cleared, so need to re-enable it. Signed-off-by: Peng Ju Zhou Signed-off-by: Emily.Deng Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c index 32ce0e679dc7..83af307e97cd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c @@ -278,6 +278,21 @@ static bool amdgpu_msi_ok(struct amdgpu_device *adev) return true; } +static void amdgpu_restore_msix(struct amdgpu_device *adev) +{ + u16 ctrl; + + pci_read_config_word(adev->pdev, adev->pdev->msix_cap + PCI_MSIX_FLAGS, &ctrl); + if (!(ctrl & PCI_MSIX_FLAGS_ENABLE)) + return; + + /* VF FLR */ + ctrl &= ~PCI_MSIX_FLAGS_ENABLE; + pci_write_config_word(adev->pdev, adev->pdev->msix_cap + PCI_MSIX_FLAGS, ctrl); + ctrl |= PCI_MSIX_FLAGS_ENABLE; + pci_write_config_word(adev->pdev, adev->pdev->msix_cap + PCI_MSIX_FLAGS, ctrl); +} + /** * amdgpu_irq_init - initialize interrupt handling * @@ -569,6 +584,9 @@ void amdgpu_irq_gpu_reset_resume_helper(struct amdgpu_device *adev) { int i, j, k; + if (amdgpu_sriov_vf(adev)) + amdgpu_restore_msix(adev); + for (i = 0; i < AMDGPU_IRQ_CLIENTID_MAX; ++i) { if (!adev->irq.client[i].sources) continue; -- cgit v1.2.3-58-ga151 From 06055d2e1ce83ba02b0073ff6f4fdb883fdb05c0 Mon Sep 17 00:00:00 2001 From: Chengming Gui Date: Fri, 9 Jul 2021 16:23:48 +0800 Subject: drm/amd/pm: Fix BACO state setting for Beige_Goby Correct BACO state setting for Beige_Goby Signed-off-by: Chengming Gui Reviewed-by: Jiansong Chen Reviewed-by: Guchun Chen Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c index 388c5cb5c647..0a5d46ac9ccd 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c @@ -1528,6 +1528,7 @@ int smu_v11_0_baco_set_state(struct smu_context *smu, enum smu_baco_state state) case CHIP_SIENNA_CICHLID: case CHIP_NAVY_FLOUNDER: case CHIP_DIMGREY_CAVEFISH: + case CHIP_BEIGE_GOBY: if (amdgpu_runtime_pm == 2) ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_EnterBaco, -- cgit v1.2.3-58-ga151 From f5cc09acece432d536c2e62c791b52760a25fa5c Mon Sep 17 00:00:00 2001 From: Eric Huang Date: Fri, 9 Jul 2021 14:51:34 -0400 Subject: Revert "drm/amdkfd: Add memory sync before TLB flush on unmap" This reverts commit 3be4dca197010d1328df8b11febc8c40491be498. Reason for revert: it causes regressions on several Asics. Signed-off-by: Eric Huang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 23 +++-------------------- 1 file changed, 3 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c index 67541c30327a..a10e3823b660 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c @@ -1566,29 +1566,13 @@ static int kfd_ioctl_unmap_memory_from_gpu(struct file *filep, i, args->n_devices); goto unmap_memory_from_gpu_failed; } - args->n_success = i+1; - } - mutex_unlock(&p->mutex); - - err = amdgpu_amdkfd_gpuvm_sync_memory(dev->kgd, (struct kgd_mem *) mem, true); - if (err) { - pr_debug("Sync memory failed, wait interrupted by user signal\n"); - goto sync_memory_failed; - } - - /* Flush TLBs after waiting for the page table updates to complete */ - for (i = 0; i < args->n_devices; i++) { - peer = kfd_device_by_id(devices_arr[i]); - if (WARN_ON_ONCE(!peer)) - continue; - peer_pdd = kfd_get_process_device_data(peer, p); - if (WARN_ON_ONCE(!peer_pdd)) - continue; kfd_flush_tlb(peer_pdd, TLB_FLUSH_HEAVYWEIGHT); + args->n_success = i+1; } - kfree(devices_arr); + mutex_unlock(&p->mutex); + return 0; bind_process_to_device_failed: @@ -1596,7 +1580,6 @@ get_mem_obj_from_handle_failed: unmap_memory_from_gpu_failed: mutex_unlock(&p->mutex); copy_from_user_failed: -sync_memory_failed: kfree(devices_arr); return err; } -- cgit v1.2.3-58-ga151 From 22762e376612be51a47c96d977bdc103c7a4436c Mon Sep 17 00:00:00 2001 From: Eric Huang Date: Fri, 9 Jul 2021 14:55:03 -0400 Subject: Revert "drm/amdgpu: Fix warning of Function parameter or member not described" This reverts commit 7a68d188d1c4a9d947369acaa19040a58baaaeda. Reason for revert: the related commit is reverted. Signed-off-by: Eric Huang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 79cfa2d68487..6b43ebab68a1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1816,7 +1816,6 @@ void amdgpu_vm_get_memory(struct amdgpu_vm *vm, uint64_t *vram_mem, * @adev: amdgpu_device pointer * @bo_va: requested BO and VM object * @clear: if true clear the entries - * @table_freed: return true if page table is freed * * Fill in the page table entries for @bo_va. * -- cgit v1.2.3-58-ga151 From c37387c354c81eaf17bdc463727dcad1c951c0db Mon Sep 17 00:00:00 2001 From: Eric Huang Date: Fri, 9 Jul 2021 14:57:11 -0400 Subject: Revert "drm/amdkfd: Make TLB flush conditional on mapping" This reverts commit 31f33243788dcbae8bd2819ed83923a73f7dfd30. Reason for revert: it causes regressions on several Asics. Signed-off-by: Eric Huang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 19 ++++++++----------- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 23 ++++++++++------------- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 3 +-- 4 files changed, 20 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h index db16b3e83694..cf62f43a03da 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h @@ -269,7 +269,7 @@ int amdgpu_amdkfd_gpuvm_free_memory_of_gpu( struct kgd_dev *kgd, struct kgd_mem *mem, void *drm_priv, uint64_t *size); int amdgpu_amdkfd_gpuvm_map_memory_to_gpu( - struct kgd_dev *kgd, struct kgd_mem *mem, void *drm_priv, bool *table_freed); + struct kgd_dev *kgd, struct kgd_mem *mem, void *drm_priv); int amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu( struct kgd_dev *kgd, struct kgd_mem *mem, void *drm_priv); int amdgpu_amdkfd_gpuvm_sync_memory( diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c index eb82739b3080..4fb15750b9bb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c @@ -1057,8 +1057,7 @@ static void unmap_bo_from_gpuvm(struct kgd_mem *mem, static int update_gpuvm_pte(struct kgd_mem *mem, struct kfd_mem_attachment *entry, - struct amdgpu_sync *sync, - bool *table_freed) + struct amdgpu_sync *sync) { struct amdgpu_bo_va *bo_va = entry->bo_va; struct amdgpu_device *adev = entry->adev; @@ -1069,7 +1068,7 @@ static int update_gpuvm_pte(struct kgd_mem *mem, return ret; /* Update the page tables */ - ret = amdgpu_vm_bo_update(adev, bo_va, false, table_freed); + ret = amdgpu_vm_bo_update(adev, bo_va, false); if (ret) { pr_err("amdgpu_vm_bo_update failed\n"); return ret; @@ -1081,8 +1080,7 @@ static int update_gpuvm_pte(struct kgd_mem *mem, static int map_bo_to_gpuvm(struct kgd_mem *mem, struct kfd_mem_attachment *entry, struct amdgpu_sync *sync, - bool no_update_pte, - bool *table_freed) + bool no_update_pte) { int ret; @@ -1099,7 +1097,7 @@ static int map_bo_to_gpuvm(struct kgd_mem *mem, if (no_update_pte) return 0; - ret = update_gpuvm_pte(mem, entry, sync, table_freed); + ret = update_gpuvm_pte(mem, entry, sync); if (ret) { pr_err("update_gpuvm_pte() failed\n"); goto update_gpuvm_pte_failed; @@ -1596,8 +1594,7 @@ int amdgpu_amdkfd_gpuvm_free_memory_of_gpu( } int amdgpu_amdkfd_gpuvm_map_memory_to_gpu( - struct kgd_dev *kgd, struct kgd_mem *mem, - void *drm_priv, bool *table_freed) + struct kgd_dev *kgd, struct kgd_mem *mem, void *drm_priv) { struct amdgpu_device *adev = get_amdgpu_device(kgd); struct amdgpu_vm *avm = drm_priv_to_vm(drm_priv); @@ -1685,7 +1682,7 @@ int amdgpu_amdkfd_gpuvm_map_memory_to_gpu( entry->va, entry->va + bo_size, entry); ret = map_bo_to_gpuvm(mem, entry, ctx.sync, - is_invalid_userptr, table_freed); + is_invalid_userptr); if (ret) { pr_err("Failed to map bo to gpuvm\n"); goto out_unreserve; @@ -2135,7 +2132,7 @@ static int validate_invalid_user_pages(struct amdkfd_process_info *process_info) continue; kfd_mem_dmaunmap_attachment(mem, attachment); - ret = update_gpuvm_pte(mem, attachment, &sync, NULL); + ret = update_gpuvm_pte(mem, attachment, &sync); if (ret) { pr_err("%s: update PTE failed\n", __func__); /* make sure this gets validated again */ @@ -2341,7 +2338,7 @@ int amdgpu_amdkfd_gpuvm_restore_process_bos(void *info, struct dma_fence **ef) continue; kfd_mem_dmaunmap_attachment(mem, attachment); - ret = update_gpuvm_pte(mem, attachment, &sync_obj, NULL); + ret = update_gpuvm_pte(mem, attachment, &sync_obj); if (ret) { pr_debug("Memory eviction: update PTE failed. Try again\n"); goto validate_map_fail; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c index a10e3823b660..84894cd81ced 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c @@ -1393,7 +1393,6 @@ static int kfd_ioctl_map_memory_to_gpu(struct file *filep, long err = 0; int i; uint32_t *devices_arr = NULL; - bool table_freed = false; dev = kfd_device_by_id(GET_GPU_ID(args->handle)); if (!dev) @@ -1451,8 +1450,7 @@ static int kfd_ioctl_map_memory_to_gpu(struct file *filep, goto get_mem_obj_from_handle_failed; } err = amdgpu_amdkfd_gpuvm_map_memory_to_gpu( - peer->kgd, (struct kgd_mem *)mem, - peer_pdd->drm_priv, &table_freed); + peer->kgd, (struct kgd_mem *)mem, peer_pdd->drm_priv); if (err) { pr_err("Failed to map to gpu %d/%d\n", i, args->n_devices); @@ -1470,17 +1468,16 @@ static int kfd_ioctl_map_memory_to_gpu(struct file *filep, } /* Flush TLBs after waiting for the page table updates to complete */ - if (table_freed) { - for (i = 0; i < args->n_devices; i++) { - peer = kfd_device_by_id(devices_arr[i]); - if (WARN_ON_ONCE(!peer)) - continue; - peer_pdd = kfd_get_process_device_data(peer, p); - if (WARN_ON_ONCE(!peer_pdd)) - continue; - kfd_flush_tlb(peer_pdd, TLB_FLUSH_LEGACY); - } + for (i = 0; i < args->n_devices; i++) { + peer = kfd_device_by_id(devices_arr[i]); + if (WARN_ON_ONCE(!peer)) + continue; + peer_pdd = kfd_get_process_device_data(peer, p); + if (WARN_ON_ONCE(!peer_pdd)) + continue; + kfd_flush_tlb(peer_pdd, TLB_FLUSH_LEGACY); } + kfree(devices_arr); return err; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c index 21ec8a18cad2..8a2c6fc438c0 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c @@ -714,8 +714,7 @@ static int kfd_process_alloc_gpuvm(struct kfd_process_device *pdd, if (err) goto err_alloc_mem; - err = amdgpu_amdkfd_gpuvm_map_memory_to_gpu(kdev->kgd, mem, - pdd->drm_priv, NULL); + err = amdgpu_amdkfd_gpuvm_map_memory_to_gpu(kdev->kgd, mem, pdd->drm_priv); if (err) goto err_map_mem; -- cgit v1.2.3-58-ga151 From d605094394ee35afd22f8adbe4a4b7b5f0c143a2 Mon Sep 17 00:00:00 2001 From: Eric Huang Date: Fri, 9 Jul 2021 14:58:16 -0400 Subject: Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update" This reverts commit 075e8080c1a7571563171a07fa9ce47c4bc80044. Reason for revert: the related commit is reverted. Signed-off-by: Eric Huang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 6 +++--- drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 10 +++++----- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h | 2 +- 4 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index 76fe5b71e35d..30fa1f61e0e5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -781,7 +781,7 @@ static int amdgpu_cs_vm_handling(struct amdgpu_cs_parser *p) if (r) return r; - r = amdgpu_vm_bo_update(adev, fpriv->prt_va, false, NULL); + r = amdgpu_vm_bo_update(adev, fpriv->prt_va, false); if (r) return r; @@ -792,7 +792,7 @@ static int amdgpu_cs_vm_handling(struct amdgpu_cs_parser *p) if (amdgpu_mcbp || amdgpu_sriov_vf(adev)) { bo_va = fpriv->csa_va; BUG_ON(!bo_va); - r = amdgpu_vm_bo_update(adev, bo_va, false, NULL); + r = amdgpu_vm_bo_update(adev, bo_va, false); if (r) return r; @@ -811,7 +811,7 @@ static int amdgpu_cs_vm_handling(struct amdgpu_cs_parser *p) if (bo_va == NULL) continue; - r = amdgpu_vm_bo_update(adev, bo_va, false, NULL); + r = amdgpu_vm_bo_update(adev, bo_va, false); if (r) return r; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c index b3404c43a911..d0d9bc445d7b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c @@ -612,7 +612,7 @@ static void amdgpu_gem_va_update_vm(struct amdgpu_device *adev, if (operation == AMDGPU_VA_OP_MAP || operation == AMDGPU_VA_OP_REPLACE) { - r = amdgpu_vm_bo_update(adev, bo_va, false, NULL); + r = amdgpu_vm_bo_update(adev, bo_va, false); if (r) goto error; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 6b43ebab68a1..078c068937fe 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1758,7 +1758,7 @@ int amdgpu_vm_bo_update_mapping(struct amdgpu_device *adev, r = vm->update_funcs->commit(¶ms, fence); if (table_freed) - *table_freed = *table_freed || params.table_freed; + *table_freed = params.table_freed; error_unlock: amdgpu_vm_eviction_unlock(vm); @@ -1823,7 +1823,7 @@ void amdgpu_vm_get_memory(struct amdgpu_vm *vm, uint64_t *vram_mem, * 0 for success, -EINVAL for failure. */ int amdgpu_vm_bo_update(struct amdgpu_device *adev, struct amdgpu_bo_va *bo_va, - bool clear, bool *table_freed) + bool clear) { struct amdgpu_bo *bo = bo_va->base.bo; struct amdgpu_vm *vm = bo_va->base.vm; @@ -1902,7 +1902,7 @@ int amdgpu_vm_bo_update(struct amdgpu_device *adev, struct amdgpu_bo_va *bo_va, resv, mapping->start, mapping->last, update_flags, mapping->offset, mem, - pages_addr, last_update, table_freed); + pages_addr, last_update, NULL); if (r) return r; } @@ -2154,7 +2154,7 @@ int amdgpu_vm_handle_moved(struct amdgpu_device *adev, list_for_each_entry_safe(bo_va, tmp, &vm->moved, base.vm_status) { /* Per VM BOs never need to bo cleared in the page tables */ - r = amdgpu_vm_bo_update(adev, bo_va, false, NULL); + r = amdgpu_vm_bo_update(adev, bo_va, false); if (r) return r; } @@ -2173,7 +2173,7 @@ int amdgpu_vm_handle_moved(struct amdgpu_device *adev, else clear = true; - r = amdgpu_vm_bo_update(adev, bo_va, clear, NULL); + r = amdgpu_vm_bo_update(adev, bo_va, clear); if (r) return r; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h index ddb85a85cbba..f8fa653d4da7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h @@ -406,7 +406,7 @@ int amdgpu_vm_bo_update_mapping(struct amdgpu_device *adev, struct dma_fence **fence, bool *free_table); int amdgpu_vm_bo_update(struct amdgpu_device *adev, struct amdgpu_bo_va *bo_va, - bool clear, bool *table_freed); + bool clear); bool amdgpu_vm_evictable(struct amdgpu_bo *bo); void amdgpu_vm_bo_invalidate(struct amdgpu_device *adev, struct amdgpu_bo *bo, bool evicted); -- cgit v1.2.3-58-ga151 From 5adcd7458a78120dddec6b53c9619acd8f4d5931 Mon Sep 17 00:00:00 2001 From: Eric Huang Date: Fri, 9 Jul 2021 14:59:20 -0400 Subject: Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping" This reverts commit 1098d658bef05e5fee634aab0b6a1fa590cfca24. Reason for revert: it causes regressions on several Asics. Signed-off-by: Eric Huang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c index 84894cd81ced..e48acdd03c1a 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c @@ -1563,7 +1563,6 @@ static int kfd_ioctl_unmap_memory_from_gpu(struct file *filep, i, args->n_devices); goto unmap_memory_from_gpu_failed; } - kfd_flush_tlb(peer_pdd, TLB_FLUSH_HEAVYWEIGHT); args->n_success = i+1; } kfree(devices_arr); -- cgit v1.2.3-58-ga151 From adefab4ef308f43c80537bd28e059eed7f3517e4 Mon Sep 17 00:00:00 2001 From: Aaron Liu Date: Tue, 13 Jul 2021 14:54:47 +0800 Subject: drm/amd/pm: Add waiting for response of mode-reset message for yellow carp Remove mdelay process and use smu_cmn_send_smc_msg_with_param to send mode-reset message to SMC. Signed-off-by: Aaron Liu Reviewed-by: Evan Quan Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c index de92f713a911..0cfeb9fc7c03 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c @@ -298,13 +298,9 @@ static int yellow_carp_mode_reset(struct smu_context *smu, int type) if (index < 0) return index == -EACCES ? 0 : index; - mutex_lock(&smu->message_lock); - - ret = smu_cmn_send_msg_without_waiting(smu, (uint16_t)index, type); - - mutex_unlock(&smu->message_lock); - - mdelay(10); + ret = smu_cmn_send_smc_msg_with_param(smu, (uint16_t)index, type, NULL); + if (ret) + dev_err(smu->adev->dev, "Failed to mode reset!\n"); return ret; } -- cgit v1.2.3-58-ga151 From e56c6bbd98dc1cefb6f9c5d795fd29016e4f2fe7 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 13 Jul 2021 12:33:50 +0300 Subject: net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload The point with a *dev and a *brport_dev is that when we have a LAG net device that is a bridge port, *dev is an ocelot net device and *brport_dev is the bonding/team net device. The ocelot net device beneath the LAG does not exist from the bridge's perspective, so we need to sync the switchdev objects belonging to the brport_dev and not to the dev. Fixes: e4bd44e89dcf ("net: ocelot: replay switchdev events when joining bridge") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot_net.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c index 3e89e34f86d5..e9d260d84bf3 100644 --- a/drivers/net/ethernet/mscc/ocelot_net.c +++ b/drivers/net/ethernet/mscc/ocelot_net.c @@ -1298,6 +1298,7 @@ static int ocelot_netdevice_lag_leave(struct net_device *dev, } static int ocelot_netdevice_changeupper(struct net_device *dev, + struct net_device *brport_dev, struct netdev_notifier_changeupper_info *info) { struct netlink_ext_ack *extack; @@ -1307,11 +1308,11 @@ static int ocelot_netdevice_changeupper(struct net_device *dev, if (netif_is_bridge_master(info->upper_dev)) { if (info->linking) - err = ocelot_netdevice_bridge_join(dev, dev, + err = ocelot_netdevice_bridge_join(dev, brport_dev, info->upper_dev, extack); else - err = ocelot_netdevice_bridge_leave(dev, dev, + err = ocelot_netdevice_bridge_leave(dev, brport_dev, info->upper_dev); } if (netif_is_lag_master(info->upper_dev)) { @@ -1346,7 +1347,7 @@ ocelot_netdevice_lag_changeupper(struct net_device *dev, if (ocelot_port->bond != dev) return NOTIFY_OK; - err = ocelot_netdevice_changeupper(lower, info); + err = ocelot_netdevice_changeupper(lower, dev, info); if (err) return notifier_from_errno(err); } @@ -1385,7 +1386,7 @@ static int ocelot_netdevice_event(struct notifier_block *unused, struct netdev_notifier_changeupper_info *info = ptr; if (ocelot_netdevice_dev_check(dev)) - return ocelot_netdevice_changeupper(dev, info); + return ocelot_netdevice_changeupper(dev, dev, info); if (netif_is_lag_master(dev)) return ocelot_netdevice_lag_changeupper(dev, info); -- cgit v1.2.3-58-ga151 From b0b33b048dcfbd7da82c3cde4fab02751dfab4d6 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 13 Jul 2021 12:37:19 +0300 Subject: net: dsa: sja1105: fix address learning getting disabled on the CPU port In May 2019 when commit 640f763f98c2 ("net: dsa: sja1105: Add support for Spanning Tree Protocol") was introduced, the comment that "STP does not get called for the CPU port" was true. This changed after commit 0394a63acfe2 ("net: dsa: enable and disable all ports") in August 2019 and went largely unnoticed, because the sja1105_bridge_stp_state_set() method did nothing different compared to the static setup done by sja1105_init_mac_settings(). With the ability to turn address learning off introduced by the blamed commit, there is a new priv->learn_ena port mask in the driver. When sja1105_bridge_stp_state_set() gets called and we are in BR_STATE_LEARNING or later, address learning is enabled or not depending on priv->learn_ena & BIT(port). So what happens is that priv->learn_ena is not being set from anywhere for the CPU port, and the static configuration done by sja1105_init_mac_settings() is being overwritten. To solve this, acknowledge that the static configuration of STP state is no longer necessary because the STP state is being set by the DSA core now, but what is necessary is to set priv->learn_ena for the CPU port. Fixes: 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 4f0545605f6b..ced8c9cb29c2 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -122,14 +122,12 @@ static int sja1105_init_mac_settings(struct sja1105_private *priv) for (i = 0; i < ds->num_ports; i++) { mac[i] = default_mac; - if (i == dsa_upstream_port(priv->ds, i)) { - /* STP doesn't get called for CPU port, so we need to - * set the I/O parameters statically. - */ - mac[i].dyn_learn = true; - mac[i].ingress = true; - mac[i].egress = true; - } + + /* Let sja1105_bridge_stp_state_set() keep address learning + * enabled for the CPU port. + */ + if (dsa_is_cpu_port(ds, i)) + priv->learn_ena |= BIT(i); } return 0; -- cgit v1.2.3-58-ga151 From deb7178eb940e2c5caca1b1db084a69b2e59b4c9 Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Tue, 13 Jul 2021 13:58:53 +0300 Subject: net: fddi: fix UAF in fza_probe fp is netdev private data and it cannot be used after free_netdev() call. Using fp after free_netdev() can cause UAF bug. Fix it by moving free_netdev() after error message. Fixes: 61414f5ec983 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller --- drivers/net/fddi/defza.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/fddi/defza.c b/drivers/net/fddi/defza.c index 14f07050b6b1..0de2c4552f5e 100644 --- a/drivers/net/fddi/defza.c +++ b/drivers/net/fddi/defza.c @@ -1504,9 +1504,8 @@ err_out_resource: release_mem_region(start, len); err_out_kfree: - free_netdev(dev); - pr_err("%s: initialization failure, aborting!\n", fp->name); + free_netdev(dev); return ret; } -- cgit v1.2.3-58-ga151 From 2e7ea96924acc502929c3ffa0fcbdaeec00b2208 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 11:51:58 -0500 Subject: cpufreq: Fix fall-through warning for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix a fallthrough warning by simply dropping the empty default case at the bottom. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva --- drivers/cpufreq/longhaul.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index 182a4dbca095..c538a153ee82 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -942,8 +942,6 @@ static int __init longhaul_init(void) return cpufreq_register_driver(&longhaul_driver); case 10: pr_err("Use acpi-cpufreq driver for VIA C7\n"); - default: - ; } return -ENODEV; -- cgit v1.2.3-58-ga151 From f28100cb9c9645c07cbd22431278ac9492f6a01c Mon Sep 17 00:00:00 2001 From: Íñigo Huguet Date: Tue, 13 Jul 2021 16:21:27 +0200 Subject: sfc: fix lack of XDP TX queues - error XDP TX failed (-22) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes: e26ca4b53582 sfc: reduce the number of requested xdp ev queues The buggy commit intended to allocate less channels for XDP in order to be more unlikely to reach the limit of 32 channels of the driver. The idea was to use each IRQ/eventqeue for more XDP TX queues than before, calculating which is the maximum number of TX queues that one event queue can handle. For example, in EF10 each event queue could handle up to 8 queues, better than the 4 they were handling before the change. This way, it would have to allocate half of channels than before for XDP TX. The problem is that the TX queues are also contained inside the channel structs, and there are only 4 queues per channel. Reducing the number of channels means also reducing the number of queues, resulting in not having the desired number of 1 queue per CPU. This leads to getting errors on XDP_TX and XDP_REDIRECT if they're executed from a high numbered CPU, because there only exist queues for the low half of CPUs, actually. If XDP_TX/REDIRECT is executed in a low numbered CPU, the error doesn't happen. This is the error in the logs (repeated many times, even rate limited): sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) This errors happens in function efx_xdp_tx_buffers, where it expects to have a dedicated XDP TX queue per CPU. Reverting the change makes again more likely to reach the limit of 32 channels in machines with many CPUs. If this happen, no XDP_TX/REDIRECT will be possible at all, and we will have this log error messages: At interface probe: sfc 0000:5e:00.0: Insufficient resources for 12 XDP event queues (24 other channels, max 32) At every subsequent XDP_TX/REDIRECT failure, rate limited: sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) However, without reverting the change, it makes the user to think that everything is OK at probe time, but later it fails in an unpredictable way, depending on the CPU that handles the packet. It is better to restore the predictable behaviour. If the user sees the error message at probe time, he/she can try to configure the best way it fits his/her needs. At least, he/she will have 2 options: - Accept that XDP_TX/REDIRECT is not available (he/she may not need it) - Load sfc module with modparam 'rss_cpus' with a lower number, thus creating less normal RX queues/channels, letting more free resources for XDP, with some performance penalty. Anyway, let the calculation of maximum TX queues that can be handled by a single event queue, and use it only if it's less than the number of TX queues per channel. This doesn't happen in practice, but could happen if some constant values are tweaked in the future, such us EFX_MAX_TXQ_PER_CHANNEL, EFX_MAX_EVQ_SIZE or EFX_MAX_DMAQ_SIZE. Related mailing list thread: https://lore.kernel.org/bpf/20201215104327.2be76156@carbon/ Signed-off-by: Íñigo Huguet Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx_channels.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/efx_channels.c b/drivers/net/ethernet/sfc/efx_channels.c index a3ca406a3561..5b71f8a03a6d 100644 --- a/drivers/net/ethernet/sfc/efx_channels.c +++ b/drivers/net/ethernet/sfc/efx_channels.c @@ -152,6 +152,7 @@ static int efx_allocate_msix_channels(struct efx_nic *efx, * maximum size. */ tx_per_ev = EFX_MAX_EVQ_SIZE / EFX_TXQ_MAX_ENT(efx); + tx_per_ev = min(tx_per_ev, EFX_MAX_TXQ_PER_CHANNEL); n_xdp_tx = num_possible_cpus(); n_xdp_ev = DIV_ROUND_UP(n_xdp_tx, tx_per_ev); @@ -181,7 +182,7 @@ static int efx_allocate_msix_channels(struct efx_nic *efx, efx->xdp_tx_queue_count = 0; } else { efx->n_xdp_channels = n_xdp_ev; - efx->xdp_tx_per_channel = EFX_MAX_TXQ_PER_CHANNEL; + efx->xdp_tx_per_channel = tx_per_ev; efx->xdp_tx_queue_count = n_xdp_tx; n_channels += n_xdp_ev; netif_dbg(efx, drv, efx->net_dev, -- cgit v1.2.3-58-ga151 From 788bc000d4c2f25232db19ab3a0add0ba4e27671 Mon Sep 17 00:00:00 2001 From: Íñigo Huguet Date: Tue, 13 Jul 2021 16:21:28 +0200 Subject: sfc: ensure correct number of XDP queues MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 99ba0ea616aa ("sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues") intended to fix a problem caused by a round up when calculating the number of XDP channels and queues. However, this was not the real problem. The real problem was that the number of XDP TX queues had been reduced to half in commit e26ca4b53582 ("sfc: reduce the number of requested xdp ev queues"), but the variable xdp_tx_queue_count had remained the same. Once the correct number of XDP TX queues is created again in the previous patch of this series, this also can be reverted since the error doesn't actually exist. Only in the case that there is a bug in the code we can have different values in xdp_queue_number and efx->xdp_tx_queue_count. Because of this, and per Edward Cree's suggestion, I add instead a WARN_ON to catch if it happens again in the future. Note that the number of allocated queues can be higher than the number of used ones due to the round up, as explained in the existing comment in the code. That's why we also have to stop increasing xdp_queue_number beyond efx->xdp_tx_queue_count. Signed-off-by: Íñigo Huguet Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx_channels.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/efx_channels.c b/drivers/net/ethernet/sfc/efx_channels.c index 5b71f8a03a6d..bb48a139dd15 100644 --- a/drivers/net/ethernet/sfc/efx_channels.c +++ b/drivers/net/ethernet/sfc/efx_channels.c @@ -892,18 +892,20 @@ int efx_set_channels(struct efx_nic *efx) if (efx_channel_is_xdp_tx(channel)) { efx_for_each_channel_tx_queue(tx_queue, channel) { tx_queue->queue = next_queue++; - netif_dbg(efx, drv, efx->net_dev, "Channel %u TXQ %u is XDP %u, HW %u\n", - channel->channel, tx_queue->label, - xdp_queue_number, tx_queue->queue); + /* We may have a few left-over XDP TX * queues owing to xdp_tx_queue_count * not dividing evenly by EFX_MAX_TXQ_PER_CHANNEL. * We still allocate and probe those * TXQs, but never use them. */ - if (xdp_queue_number < efx->xdp_tx_queue_count) + if (xdp_queue_number < efx->xdp_tx_queue_count) { + netif_dbg(efx, drv, efx->net_dev, "Channel %u TXQ %u is XDP %u, HW %u\n", + channel->channel, tx_queue->label, + xdp_queue_number, tx_queue->queue); efx->xdp_tx_queues[xdp_queue_number] = tx_queue; - xdp_queue_number++; + xdp_queue_number++; + } } } else { efx_for_each_channel_tx_queue(tx_queue, channel) { @@ -915,8 +917,7 @@ int efx_set_channels(struct efx_nic *efx) } } } - if (xdp_queue_number) - efx->xdp_tx_queue_count = xdp_queue_number; + WARN_ON(xdp_queue_number != efx->xdp_tx_queue_count); rc = netif_set_real_num_tx_queues(efx->net_dev, efx->n_tx_channels); if (rc) -- cgit v1.2.3-58-ga151 From d2a16bde77322fca6b6f36ebe19097a1c3c46f74 Mon Sep 17 00:00:00 2001 From: Íñigo Huguet Date: Tue, 13 Jul 2021 16:21:29 +0200 Subject: sfc: add logs explaining XDP_TX/REDIRECT is not available MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If it's not possible to allocate enough channels for XDP, XDP_TX and XDP_REDIRECT don't work. However, only a message saying that not enough channels were available was shown, but not saying what are the consequences in that case. The user didn't know if he/she can use XDP or not, if the performance is reduced, or what. Signed-off-by: Íñigo Huguet Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx_channels.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/efx_channels.c b/drivers/net/ethernet/sfc/efx_channels.c index bb48a139dd15..e5b0d795c301 100644 --- a/drivers/net/ethernet/sfc/efx_channels.c +++ b/drivers/net/ethernet/sfc/efx_channels.c @@ -170,6 +170,8 @@ static int efx_allocate_msix_channels(struct efx_nic *efx, netif_err(efx, drv, efx->net_dev, "Insufficient resources for %d XDP event queues (%d other channels, max %d)\n", n_xdp_ev, n_channels, max_channels); + netif_err(efx, drv, efx->net_dev, + "XDP_TX and XDP_REDIRECT will not work on this interface"); efx->n_xdp_channels = 0; efx->xdp_tx_per_channel = 0; efx->xdp_tx_queue_count = 0; @@ -177,6 +179,8 @@ static int efx_allocate_msix_channels(struct efx_nic *efx, netif_err(efx, drv, efx->net_dev, "Insufficient resources for %d XDP TX queues (%d other channels, max VIs %d)\n", n_xdp_tx, n_channels, efx->max_vis); + netif_err(efx, drv, efx->net_dev, + "XDP_TX and XDP_REDIRECT will not work on this interface"); efx->n_xdp_channels = 0; efx->xdp_tx_per_channel = 0; efx->xdp_tx_queue_count = 0; -- cgit v1.2.3-58-ga151 From c8698340e0e5897c30811f8e7e86bcebe53e0519 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 13:13:40 -0500 Subject: video: fbdev: Fix fall-through warning for Clang Fix the following fallthrough warning (arm64-randconfig with Clang): drivers/video/fbdev/xilinxfb.c:244:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva --- drivers/video/fbdev/xilinxfb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/video/fbdev/xilinxfb.c b/drivers/video/fbdev/xilinxfb.c index ffbf900648d9..438e2c78142f 100644 --- a/drivers/video/fbdev/xilinxfb.c +++ b/drivers/video/fbdev/xilinxfb.c @@ -241,6 +241,8 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi) case FB_BLANK_POWERDOWN: /* turn off panel */ xilinx_fb_out32(drvdata, REG_CTRL, 0); + break; + default: break; } -- cgit v1.2.3-58-ga151 From 223fa873facce6eef165009294d01e18c191c609 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 13:18:14 -0500 Subject: scsi: libsas: Fix fall-through warning for Clang Fix the following fallthrough warning (arm64-randconfig with Clang): drivers/scsi/libsas/sas_discover.c:467:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva --- drivers/scsi/libsas/sas_discover.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 9f5068f3bcfb..dd205414e505 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -461,7 +461,7 @@ static void sas_discover_domain(struct work_struct *work) break; #else pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n"); - /* Fall through */ + fallthrough; #endif /* Fall through - only for the #else condition above. */ default: -- cgit v1.2.3-58-ga151 From 54325d0849d60ed52ee9316f76d116b52b53669b Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 13:21:22 -0500 Subject: PCI: Fix fall-through warning for Clang Fix the following fallthrough warning (arm64-randconfig with Clang): drivers/pci/proc.c:234:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva --- drivers/pci/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 9bab07302bbf..d32fbfc93ea9 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -230,8 +230,8 @@ static long proc_bus_pci_ioctl(struct file *file, unsigned int cmd, break; } /* If arch decided it can't, fall through... */ -#endif /* HAVE_PCI_MMAP */ fallthrough; +#endif /* HAVE_PCI_MMAP */ default: ret = -EINVAL; break; -- cgit v1.2.3-58-ga151 From f95deaeca8e106af891061e5f9c745dc7dc172c0 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 13:23:21 -0500 Subject: mmc: jz4740: Fix fall-through warning for Clang Fix the following fallthrough warning (mips-randconfig with Clang): drivers/mmc/host/jz4740_mmc.c:792:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva --- drivers/mmc/host/jz4740_mmc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index 0db17bcc9c16..cb1a64a5c256 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -789,6 +789,8 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid) break; } } + fallthrough; + case JZ4740_MMC_STATE_DONE: break; } -- cgit v1.2.3-58-ga151 From 5a1ab5c0299a7b3b9e7ec52c327f44d98b8e001d Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 13:25:06 -0500 Subject: iommu/arm-smmu-v3: Fix fall-through warning for Clang Fix the following fallthrough warning (arm64-randconfig with Clang): drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:382:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva --- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index dd20b01771c4..235f9bdaeaf2 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -379,6 +379,7 @@ static void arm_smmu_cmdq_skip_err(struct arm_smmu_device *smmu) switch (idx) { case CMDQ_ERR_CERROR_ABT_IDX: dev_err(smmu->dev, "retrying command fetch\n"); + return; case CMDQ_ERR_CERROR_NONE_IDX: return; case CMDQ_ERR_CERROR_ATC_INV_IDX: -- cgit v1.2.3-58-ga151 From 41614014a7afbbce5b61bfce5ce89ee3455143e7 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 13:27:08 -0500 Subject: dmaengine: ipu: Fix fall-through warning for Clang Fix the following fallthrough warnings (arm64-randconfig): drivers/dma/ipu/ipu_idmac.c:621:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] rivers/dma/ipu/ipu_idmac.c:981:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva --- drivers/dma/ipu/ipu_idmac.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 104ad420abbe..baab1ca9f621 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -618,6 +618,7 @@ static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan) case IDMAC_SDC_1: case IDMAC_IC_7: ipu_channel_set_priority(ipu, channel, true); + break; default: break; } @@ -978,6 +979,7 @@ static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan) case IDMAC_SDC_0: case IDMAC_SDC_1: n_desc = 4; + break; default: break; } -- cgit v1.2.3-58-ga151 From d4e81342ea2399cf92e98ea5c0d025bcf8a3d065 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 14:43:09 -0500 Subject: s390: Fix fall-through warnings for Clang Fix the following fallthrough warnings: drivers/s390/net/ctcm_fsms.c:1457:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] drivers/s390/net/qeth_l3_main.c:437:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] drivers/s390/char/tape_char.c:374:4: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] arch/s390/kernel/uprobes.c:129:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: Nathan Chancellor Signed-off-by: Gustavo A. R. Silva --- arch/s390/kernel/uprobes.c | 1 + drivers/s390/char/tape_char.c | 2 -- drivers/s390/net/ctcm_fsms.c | 1 + drivers/s390/net/qeth_l3_main.c | 1 + 4 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/arch/s390/kernel/uprobes.c b/arch/s390/kernel/uprobes.c index bbf8622bbf5d..bd3ef121c379 100644 --- a/arch/s390/kernel/uprobes.c +++ b/arch/s390/kernel/uprobes.c @@ -126,6 +126,7 @@ int arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, case DIE_SSTEP: if (uprobe_post_sstep_notifier(regs)) return NOTIFY_STOP; + break; default: break; } diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c index 8abb42923307..cc8237afeffa 100644 --- a/drivers/s390/char/tape_char.c +++ b/drivers/s390/char/tape_char.c @@ -371,8 +371,6 @@ __tapechar_ioctl(struct tape_device *device, case MTSEEK: if (device->required_tapemarks) tape_std_terminate_write(device); - default: - ; } rc = tape_mtop(device, op.mt_op, op.mt_count); diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c index b341075397d9..377e3689d1d4 100644 --- a/drivers/s390/net/ctcm_fsms.c +++ b/drivers/s390/net/ctcm_fsms.c @@ -1454,6 +1454,7 @@ again: get_ccwdev_lock(ch->cdev), saveflags); if (rc != 0) ctcm_ccw_check_rc(ch, rc, "normal RX"); + break; default: break; } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index d308ff744a29..f0d6f205c53c 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -434,6 +434,7 @@ static int qeth_l3_correct_routing_type(struct qeth_card *card, if (qeth_is_ipafunc_supported(card, prot, IPA_OSA_MC_ROUTER)) return 0; + goto out_inval; default: goto out_inval; } -- cgit v1.2.3-58-ga151 From d6a48a476a5de8bdfbdd6040aa5a48955fc49e44 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 14:48:28 -0500 Subject: dmaengine: ti: k3-udma: Fix fall-through warning for Clang Fix the following fallthrough warning: drivers/dma/ti/k3-udma.c:4951:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: Nathan Chancellor Signed-off-by: Gustavo A. R. Silva --- drivers/dma/ti/k3-udma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 96ad21869ba7..a35858610780 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -4948,6 +4948,7 @@ static int setup_resources(struct udma_dev *ud) ud->tchan_cnt), ud->rchan_cnt - bitmap_weight(ud->rchan_map, ud->rchan_cnt)); + break; default: break; } -- cgit v1.2.3-58-ga151 From b51883d47d37c3f3fa80d6bcd8cc3a57d5b95130 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 14:50:47 -0500 Subject: power: supply: Fix fall-through warnings for Clang Fix the following fallthrough warnings: drivers/power/supply/ab8500_fg.c:1730:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] drivers/power/supply/abx500_chargalg.c:1155:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: Nathan Chancellor Signed-off-by: Gustavo A. R. Silva --- drivers/power/supply/ab8500_fg.c | 2 ++ drivers/power/supply/abx500_chargalg.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c index 3d45ed0157c6..a6ebdb269fdd 100644 --- a/drivers/power/supply/ab8500_fg.c +++ b/drivers/power/supply/ab8500_fg.c @@ -1728,6 +1728,7 @@ static void ab8500_fg_algorithm_calibrate(struct ab8500_fg *di) break; case AB8500_FG_CALIB_WAIT: dev_dbg(di->dev, "Calibration WFI\n"); + break; default: break; } @@ -2224,6 +2225,7 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) queue_work(di->fg_wq, &di->fg_work); break; } + break; default: break; } diff --git a/drivers/power/supply/abx500_chargalg.c b/drivers/power/supply/abx500_chargalg.c index a17849bfacbf..b72826cf6794 100644 --- a/drivers/power/supply/abx500_chargalg.c +++ b/drivers/power/supply/abx500_chargalg.c @@ -1150,6 +1150,7 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) default: break; } + break; default: break; } -- cgit v1.2.3-58-ga151 From 2feeb52859fc1ab94cd35b61ada3a6ac4ff24243 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 30 Jun 2021 19:44:13 +0300 Subject: drm/i915/gt: Fix -EDEADLK handling regression MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The conversion to ww mutexes failed to address the fence code which already returns -EDEADLK when we run out of fences. Ww mutexes on the other hand treat -EDEADLK as an internal errno value indicating a need to restart the operation due to a deadlock. So now when the fence code returns -EDEADLK the higher level code erroneously restarts everything instead of returning the error to userspace as is expected. To remedy this let's switch the fence code to use a different errno value for this. -ENOBUFS seems like a semi-reasonable unique choice. Apart from igt the only user of this I could find is sna, and even there all we do is dump the current fence registers from debugfs into the X server log. So no user visible functionality is affected. If we really cared about preserving this we could of course convert back to -EDEADLK higher up, but doesn't seem like that's worth the hassle here. Not quite sure which commit specifically broke this, but I'll just attribute it to the general gem ww mutex work. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst Cc: Thomas Hellström Testcase: igt/gem_pread/exhaustion Testcase: igt/gem_pwrite/basic-exhaustion Testcase: igt/gem_fenced_exec_thrash/too-many-fences Fixes: 80f0b679d6f0 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210630164413.25481-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst (cherry picked from commit 78d2ad7eb4e1f0e9cd5d79788446b6092c21d3e0) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c index cac7f3f44642..f8948de72036 100644 --- a/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c +++ b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c @@ -348,7 +348,7 @@ static struct i915_fence_reg *fence_find(struct i915_ggtt *ggtt) if (intel_has_pending_fb_unpin(ggtt->vm.i915)) return ERR_PTR(-EAGAIN); - return ERR_PTR(-EDEADLK); + return ERR_PTR(-ENOBUFS); } int __i915_vma_pin_fence(struct i915_vma *vma) -- cgit v1.2.3-58-ga151 From 479857a9bcc86e808216daae8ca1c9213b9e117a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 13 Jul 2021 19:19:03 -0500 Subject: powerpc/powernv: Fix fall-through warning for Clang Fix the following fallthrough warnings (powernv_defconfig and powerpc64): drivers/char/powernv-op-panel.c:78:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: Nathan Chancellor Signed-off-by: Gustavo A. R. Silva --- drivers/char/powernv-op-panel.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/char/powernv-op-panel.c b/drivers/char/powernv-op-panel.c index 027484ecfb0d..3c99696b145e 100644 --- a/drivers/char/powernv-op-panel.c +++ b/drivers/char/powernv-op-panel.c @@ -75,6 +75,7 @@ static int __op_panel_update_display(void) rc); break; } + break; case OPAL_SUCCESS: break; default: -- cgit v1.2.3-58-ga151 From ce36c94214f0d534aad4adb4219cc046270948fb Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 5 Jul 2021 08:56:57 +0200 Subject: iommu/qcom: Revert "iommu/arm: Cleanup resources in case of probe error path" QCOM IOMMU driver calls bus_set_iommu() for every IOMMU device controller, what fails for the second and latter IOMMU devices. This is intended and must be not fatal to the driver registration process. Also the cleanup path should take care of the runtime PM state, what is missing in the current patch. Revert relevant changes to the QCOM IOMMU driver until a proper fix is prepared. This partially reverts commit 249c9dc6aa0db74a0f7908efd04acf774e19b155. Fixes: 249c9dc6aa0d ("iommu/arm: Cleanup resources in case of probe error path") Suggested-by: Will Deacon Signed-off-by: Marek Szyprowski Acked-by: Will Deacon Link: https://lore.kernel.org/r/20210705065657.30356-1-m.szyprowski@samsung.com Signed-off-by: Joerg Roedel --- drivers/iommu/arm/arm-smmu/qcom_iommu.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/arm/arm-smmu/qcom_iommu.c b/drivers/iommu/arm/arm-smmu/qcom_iommu.c index 25ed444ff94d..021cf8f65ffc 100644 --- a/drivers/iommu/arm/arm-smmu/qcom_iommu.c +++ b/drivers/iommu/arm/arm-smmu/qcom_iommu.c @@ -849,12 +849,10 @@ static int qcom_iommu_device_probe(struct platform_device *pdev) ret = iommu_device_register(&qcom_iommu->iommu, &qcom_iommu_ops, dev); if (ret) { dev_err(dev, "Failed to register iommu\n"); - goto err_sysfs_remove; + return ret; } - ret = bus_set_iommu(&platform_bus_type, &qcom_iommu_ops); - if (ret) - goto err_unregister_device; + bus_set_iommu(&platform_bus_type, &qcom_iommu_ops); if (qcom_iommu->local_base) { pm_runtime_get_sync(dev); @@ -863,13 +861,6 @@ static int qcom_iommu_device_probe(struct platform_device *pdev) } return 0; - -err_unregister_device: - iommu_device_unregister(&qcom_iommu->iommu); - -err_sysfs_remove: - iommu_device_sysfs_remove(&qcom_iommu->iommu); - return ret; } static int qcom_iommu_device_remove(struct platform_device *pdev) -- cgit v1.2.3-58-ga151 From 37764b952e1b39053defc7ebe5dcd8c4e3e78de9 Mon Sep 17 00:00:00 2001 From: Sanjay Kumar Date: Mon, 12 Jul 2021 15:13:15 +0800 Subject: iommu/vt-d: Global devTLB flush when present context entry changed This fixes a bug in context cache clear operation. The code was not following the correct invalidation flow. A global device TLB invalidation should be added after the IOTLB invalidation. At the same time, it uses the domain ID from the context entry. But in scalable mode, the domain ID is in PASID table entry, not context entry. Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Sanjay Kumar Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20210712071315.3416543-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index a6a07d985709..57270290d62b 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -2429,10 +2429,11 @@ __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, return 0; } -static void domain_context_clear_one(struct intel_iommu *iommu, u8 bus, u8 devfn) +static void domain_context_clear_one(struct device_domain_info *info, u8 bus, u8 devfn) { - unsigned long flags; + struct intel_iommu *iommu = info->iommu; struct context_entry *context; + unsigned long flags; u16 did_old; if (!iommu) @@ -2444,7 +2445,16 @@ static void domain_context_clear_one(struct intel_iommu *iommu, u8 bus, u8 devfn spin_unlock_irqrestore(&iommu->lock, flags); return; } - did_old = context_domain_id(context); + + if (sm_supported(iommu)) { + if (hw_pass_through && domain_type_is_si(info->domain)) + did_old = FLPT_DEFAULT_DID; + else + did_old = info->domain->iommu_did[iommu->seq_id]; + } else { + did_old = context_domain_id(context); + } + context_clear_entry(context); __iommu_flush_cache(iommu, context, sizeof(*context)); spin_unlock_irqrestore(&iommu->lock, flags); @@ -2462,6 +2472,8 @@ static void domain_context_clear_one(struct intel_iommu *iommu, u8 bus, u8 devfn 0, 0, DMA_TLB_DSI_FLUSH); + + __iommu_flush_dev_iotlb(info, 0, MAX_AGAW_PFN_WIDTH); } static inline void unlink_domain_info(struct device_domain_info *info) @@ -4425,9 +4437,9 @@ out_free_dmar: static int domain_context_clear_one_cb(struct pci_dev *pdev, u16 alias, void *opaque) { - struct intel_iommu *iommu = opaque; + struct device_domain_info *info = opaque; - domain_context_clear_one(iommu, PCI_BUS_NUM(alias), alias & 0xff); + domain_context_clear_one(info, PCI_BUS_NUM(alias), alias & 0xff); return 0; } @@ -4437,12 +4449,13 @@ static int domain_context_clear_one_cb(struct pci_dev *pdev, u16 alias, void *op * devices, unbinding the driver from any one of them will possibly leave * the others unable to operate. */ -static void domain_context_clear(struct intel_iommu *iommu, struct device *dev) +static void domain_context_clear(struct device_domain_info *info) { - if (!iommu || !dev || !dev_is_pci(dev)) + if (!info->iommu || !info->dev || !dev_is_pci(info->dev)) return; - pci_for_each_dma_alias(to_pci_dev(dev), &domain_context_clear_one_cb, iommu); + pci_for_each_dma_alias(to_pci_dev(info->dev), + &domain_context_clear_one_cb, info); } static void __dmar_remove_one_dev_info(struct device_domain_info *info) @@ -4466,7 +4479,7 @@ static void __dmar_remove_one_dev_info(struct device_domain_info *info) iommu_disable_dev_iotlb(info); if (!dev_is_real_dma_subdevice(info->dev)) - domain_context_clear(iommu, info->dev); + domain_context_clear(info); intel_pasid_free_table(info->dev); } -- cgit v1.2.3-58-ga151 From 474dd1c6506411752a9b2f2233eec11f1733a099 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Mon, 12 Jul 2021 15:17:12 +0800 Subject: iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries The commit 2b0140c69637e ("iommu/vt-d: Use pci_real_dma_dev() for mapping") fixes an issue of "sub-device is removed where the context entry is cleared for all aliases". But this commit didn't consider the PASID entry and PASID table in VT-d scalable mode. This fix increases the coverage of scalable mode. Suggested-by: Sanjay Kumar Fixes: 8038bdb855331 ("iommu/vt-d: Only clear real DMA device's context entries") Fixes: 2b0140c69637e ("iommu/vt-d: Use pci_real_dma_dev() for mapping") Cc: stable@vger.kernel.org # v5.6+ Cc: Jon Derrick Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20210712071712.3416949-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 57270290d62b..dd22fc7d5176 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -4472,14 +4472,13 @@ static void __dmar_remove_one_dev_info(struct device_domain_info *info) iommu = info->iommu; domain = info->domain; - if (info->dev) { + if (info->dev && !dev_is_real_dma_subdevice(info->dev)) { if (dev_is_pci(info->dev) && sm_supported(iommu)) intel_pasid_tear_down_entry(iommu, info->dev, PASID_RID2PASID, false); iommu_disable_dev_iotlb(info); - if (!dev_is_real_dma_subdevice(info->dev)) - domain_context_clear(info); + domain_context_clear(info); intel_pasid_free_table(info->dev); } -- cgit v1.2.3-58-ga151 From c987b65a574fad8b598d6f58f010d8f630327428 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Mon, 12 Jul 2021 12:12:32 +0200 Subject: iommu/rockchip: Fix physical address decoding Restore bits 39 to 32 at correct position. It reverses the operation done in rk_dma_addr_dte_v2(). Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2") Reported-by: Dan Carpenter Signed-off-by: Benjamin Gaignard Link: https://lore.kernel.org/r/20210712101232.318589-1-benjamin.gaignard@collabora.com Signed-off-by: Joerg Roedel --- drivers/iommu/rockchip-iommu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c index 94b9d8e5b9a4..9febfb7f3025 100644 --- a/drivers/iommu/rockchip-iommu.c +++ b/drivers/iommu/rockchip-iommu.c @@ -544,12 +544,14 @@ static inline u32 rk_dma_addr_dte(dma_addr_t dt_dma) } #define DT_HI_MASK GENMASK_ULL(39, 32) +#define DTE_BASE_HI_MASK GENMASK(11, 4) #define DT_SHIFT 28 static inline phys_addr_t rk_dte_addr_phys_v2(u32 addr) { - return (phys_addr_t)(addr & RK_DTE_PT_ADDRESS_MASK) | - ((addr & DT_HI_MASK) << DT_SHIFT); + u64 addr64 = addr; + return (phys_addr_t)(addr64 & RK_DTE_PT_ADDRESS_MASK) | + ((addr64 & DTE_BASE_HI_MASK) << DT_SHIFT); } static inline u32 rk_dma_addr_dte_v2(dma_addr_t dt_dma) -- cgit v1.2.3-58-ga151 From c934fec1c32840224fd975544c347823962193b2 Mon Sep 17 00:00:00 2001 From: Mason Zhang Date: Tue, 13 Jul 2021 19:42:48 +0800 Subject: spi: mediatek: move devm_spi_register_master position This patch move devm_spi_register_master to the end of mtk_spi_probe. If slaves call spi_sync in there probe function, master should have probe done. Signed-off-by: Mason Zhang Link: https://lore.kernel.org/r/20210713114247.1536-1-mason.zhang@mediatek.com Signed-off-by: Mark Brown --- drivers/spi/spi-mt65xx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 8d5fa7f1e506..68dca8ceb3ad 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -803,12 +803,6 @@ static int mtk_spi_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); - ret = devm_spi_register_master(&pdev->dev, master); - if (ret) { - dev_err(&pdev->dev, "failed to register master (%d)\n", ret); - goto err_disable_runtime_pm; - } - if (mdata->dev_comp->need_pad_sel) { if (mdata->pad_num != master->num_chipselect) { dev_err(&pdev->dev, @@ -848,6 +842,12 @@ static int mtk_spi_probe(struct platform_device *pdev) dev_notice(&pdev->dev, "SPI dma_set_mask(%d) failed, ret:%d\n", addr_bits, ret); + ret = devm_spi_register_master(&pdev->dev, master); + if (ret) { + dev_err(&pdev->dev, "failed to register master (%d)\n", ret); + goto err_disable_runtime_pm; + } + return 0; err_disable_runtime_pm: -- cgit v1.2.3-58-ga151 From 0abb33bfca0fb74df76aac03e90ce685016ef7be Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Tue, 13 Jul 2021 14:04:31 +0100 Subject: drm/i915/gtt: drop the page table optimisation We skip filling out the pt with scratch entries if the va range covers the entire pt, since we later have to fill it with the PTEs for the object pages anyway. However this might leave open a small window where the PTEs don't point to anything valid for the HW to consume. When for example using 2M GTT pages this fill_px() showed up as being quite significant in perf measurements, and ends up being completely wasted since we ignore the pt and just use the pde directly. Anyway, currently we have our PTE construction split between alloc and insert, which is probably slightly iffy nowadays, since the alloc doesn't actually allocate anything anymore, instead it just sets up the page directories and points the PTEs at the scratch page. Later when we do the insert step we re-program the PTEs again. Better might be to squash the alloc and insert into a single step, then bringing back this optimisation(along with some others) should be possible. Fixes: 14826673247e ("drm/i915: Only initialize partially filled pagetables") Signed-off-by: Matthew Auld Cc: Jon Bloomfield Cc: Chris Wilson Cc: Daniel Vetter Cc: # v4.15+ Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210713130431.2392740-1-matthew.auld@intel.com (cherry picked from commit 8f88ca76b3942d82e2c1cea8735ec368d89ecc15) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/gt/gen8_ppgtt.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gt/gen8_ppgtt.c b/drivers/gpu/drm/i915/gt/gen8_ppgtt.c index 21c8b7350b7a..da4f5eb43ac2 100644 --- a/drivers/gpu/drm/i915/gt/gen8_ppgtt.c +++ b/drivers/gpu/drm/i915/gt/gen8_ppgtt.c @@ -303,10 +303,7 @@ static void __gen8_ppgtt_alloc(struct i915_address_space * const vm, __i915_gem_object_pin_pages(pt->base); i915_gem_object_make_unshrinkable(pt->base); - if (lvl || - gen8_pt_count(*start, end) < I915_PDES || - intel_vgpu_active(vm->i915)) - fill_px(pt, vm->scratch[lvl]->encode); + fill_px(pt, vm->scratch[lvl]->encode); spin_lock(&pd->lock); if (likely(!pd->entry[idx])) { -- cgit v1.2.3-58-ga151 From 14158aa4510439c611759d57b74ac01ebcca0081 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 14 Jul 2021 11:02:37 -0500 Subject: usb: gadget: fsl_qe_udc: Fix fall-through warning for Clang Fix the following fallthrough warning (powerpc-randconfig): drivers/usb/gadget/udc/fsl_qe_udc.c:589:4: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/60ef0750.I8J+C6KAtb0xVOAa%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva --- drivers/usb/gadget/udc/fsl_qe_udc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 8e8588933628..15db7a3868fe 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -586,6 +586,7 @@ static int qe_ep_init(struct qe_udc *udc, case USB_SPEED_FULL: if (max <= 1023) break; + fallthrough; default: goto en_done; } -- cgit v1.2.3-58-ga151 From afbd0d299289a0faaa605af74982f87ad75468fc Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 14 Jul 2021 11:05:55 -0500 Subject: dmaengine: mpc512x: Fix fall-through warning for Clang Fix the following fallthrough warning (powerpc-randconfig): drivers/dma/mpc512x_dma.c:816:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/60ef0750.I8J+C6KAtb0xVOAa%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva --- drivers/dma/mpc512x_dma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index c1a69149c8bf..4a51fdbf5aa9 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -813,6 +813,7 @@ inline bool is_buswidth_valid(u8 buswidth, bool is_mpc8308) case 16: if (is_mpc8308) return false; + break; case 1: case 2: case 4: -- cgit v1.2.3-58-ga151 From edb25572fc7058db5a98223e11d2d50497178553 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 23 Jun 2021 00:50:01 -0700 Subject: mmc: core: Use kref in place of struct mmc_blk_data::usage Ulf reported the following KASAN splat after adding some manual hacks into mmc-utils[1]. DEBUG: mmc_blk_open: Let's sleep for 10s.. mmc1: card 0007 removed BUG: KASAN: use-after-free in mmc_blk_get+0x58/0xb8 Read of size 4 at addr ffff00000a394a28 by task mmc/180 CPU: 2 PID: 180 Comm: mmc Not tainted 5.10.0-rc4-00069-gcc758c8c7127-dirty #5 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Call trace: dump_backtrace+0x0/0x2b4 show_stack+0x18/0x6c dump_stack+0xfc/0x168 print_address_description.constprop.0+0x6c/0x488 kasan_report+0x118/0x210 __asan_load4+0x94/0xd0 mmc_blk_get+0x58/0xb8 mmc_blk_open+0x7c/0xdc __blkdev_get+0x3b4/0x964 blkdev_get+0x64/0x100 blkdev_open+0xe8/0x104 do_dentry_open+0x234/0x61c vfs_open+0x54/0x64 path_openat+0xe04/0x1584 do_filp_open+0xe8/0x1e4 do_sys_openat2+0x120/0x230 __arm64_sys_openat+0xf0/0x15c el0_svc_common.constprop.0+0xac/0x234 do_el0_svc+0x84/0xa0 el0_sync_handler+0x264/0x270 el0_sync+0x174/0x180 Allocated by task 33: stack_trace_save+0x9c/0xdc kasan_save_stack+0x28/0x60 __kasan_kmalloc.constprop.0+0xc8/0xf0 kasan_kmalloc+0x10/0x20 mmc_blk_alloc_req+0x94/0x4b0 mmc_blk_probe+0x2d4/0xaa4 mmc_bus_probe+0x34/0x4c really_probe+0x148/0x6e0 driver_probe_device+0x78/0xec __device_attach_driver+0x108/0x16c bus_for_each_drv+0xf4/0x15c __device_attach+0x168/0x240 device_initial_probe+0x14/0x20 bus_probe_device+0xec/0x100 device_add+0x55c/0xaf0 mmc_add_card+0x288/0x380 mmc_attach_sd+0x18c/0x22c mmc_rescan+0x444/0x4f0 process_one_work+0x3b8/0x650 worker_thread+0xa0/0x724 kthread+0x218/0x220 ret_from_fork+0x10/0x38 Freed by task 33: stack_trace_save+0x9c/0xdc kasan_save_stack+0x28/0x60 kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x180 kasan_slab_free+0x14/0x20 kfree+0xb8/0x46c mmc_blk_put+0xe4/0x11c mmc_blk_remove_req.part.0+0x6c/0xe4 mmc_blk_remove+0x368/0x370 mmc_bus_remove+0x34/0x50 __device_release_driver+0x228/0x31c device_release_driver+0x2c/0x44 bus_remove_device+0x1e4/0x200 device_del+0x2b0/0x770 mmc_remove_card+0xf0/0x150 mmc_sd_detect+0x9c/0x150 mmc_rescan+0x110/0x4f0 process_one_work+0x3b8/0x650 worker_thread+0xa0/0x724 kthread+0x218/0x220 ret_from_fork+0x10/0x38 The buggy address belongs to the object at ffff00000a394800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 552 bytes inside of 1024-byte region [ffff00000a394800, ffff00000a394c00) The buggy address belongs to the page: page:00000000ff84ed53 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8a390 head:00000000ff84ed53 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x3fffc0000010200(slab|head) raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff000009f03800 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff00000a394900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff00000a394980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff00000a394a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff00000a394a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff00000a394b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Looking closer at the problem, it looks like a classic dangling pointer bug. The 'struct mmc_blk_data' that is used after being freed in mmc_blk_put() is stashed away in 'md->disk->private_data' via mmc_blk_alloc_req() but used in mmc_blk_get() because the 'usage' count isn't properly aligned with the lifetime of the pointer. You'd expect the 'usage' member to be in sync with the kfree(), and it mostly is, except that mmc_blk_get() needs to dereference the potentially freed memory storage for the 'struct mmc_blk_data' stashed away in the private_data member to look at 'usage' before it actually figures out if it wants to consider it a valid pointer or not. That's not going to work if the freed memory has been overwritten by something else after the free, and KASAN rightly complains here. To fix the immediate problem, let's set the private_data member to NULL in mmc_blk_put() so that mmc_blk_get() can consider the object "on the way out" if the pointer is NULL and not even try to look at 'usage' if the object isn't going to be around much longer. With that set to NULL on the last mmc_blk_put(), optimize the get path further and use a kref underneath the 'open_lock' mutex to only up the reference count if it's non-zero, i.e. alive, and otherwise make mmc_blk_get() return NULL, without actually testing the reference count if we're in the process of removing the object from the system. Finally, tighten the locking region on the put side to only be around the parts that are removing the 'mmc_blk_data' from the system and publishing that fact to the gendisk and then drop the lock as soon as we can to avoid holding the lock around code that doesn't need it. This fixes the KASAN issue. Cc: Matthias Schiffer Cc: Sujit Kautkar Cc: Zubin Mithra Reported-by: Ulf Hansson Link: https://lore.kernel.org/linux-mmc/CAPDyKFryT63Jc7+DXWSpAC19qpZRqFr1orxwYGMuSqx247O8cQ@mail.gmail.com/ [1] Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20210623075002.1746924-2-swboyd@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/core/block.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 9890a1532cb0..ce8aed562929 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -111,7 +112,7 @@ struct mmc_blk_data { #define MMC_BLK_CMD23 (1 << 0) /* Can do SET_BLOCK_COUNT for multiblock */ #define MMC_BLK_REL_WR (1 << 1) /* MMC Reliable write support */ - unsigned int usage; + struct kref kref; unsigned int read_only; unsigned int part_type; unsigned int reset_done; @@ -181,10 +182,8 @@ static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) mutex_lock(&open_lock); md = disk->private_data; - if (md && md->usage == 0) + if (md && !kref_get_unless_zero(&md->kref)) md = NULL; - if (md) - md->usage++; mutex_unlock(&open_lock); return md; @@ -196,18 +195,25 @@ static inline int mmc_get_devidx(struct gendisk *disk) return devidx; } -static void mmc_blk_put(struct mmc_blk_data *md) +static void mmc_blk_kref_release(struct kref *ref) { - mutex_lock(&open_lock); - md->usage--; - if (md->usage == 0) { - int devidx = mmc_get_devidx(md->disk); + struct mmc_blk_data *md = container_of(ref, struct mmc_blk_data, kref); + int devidx; - ida_simple_remove(&mmc_blk_ida, devidx); - put_disk(md->disk); - kfree(md); - } + devidx = mmc_get_devidx(md->disk); + ida_simple_remove(&mmc_blk_ida, devidx); + + mutex_lock(&open_lock); + md->disk->private_data = NULL; mutex_unlock(&open_lock); + + put_disk(md->disk); + kfree(md); +} + +static void mmc_blk_put(struct mmc_blk_data *md) +{ + kref_put(&md->kref, mmc_blk_kref_release); } static ssize_t power_ro_lock_show(struct device *dev, @@ -2327,7 +2333,8 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, INIT_LIST_HEAD(&md->part); INIT_LIST_HEAD(&md->rpmbs); - md->usage = 1; + kref_init(&md->kref); + md->queue.blkdata = md; md->disk->major = MMC_BLOCK_MAJOR; -- cgit v1.2.3-58-ga151 From 10252bae863d09b9648bed2e035572d207200ca1 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 23 Jun 2021 00:50:02 -0700 Subject: mmc: core: Don't allocate IDA for OF aliases There's a chance that the IDA allocated in mmc_alloc_host() is not freed for some time because it's freed as part of a class' release function (see mmc_host_classdev_release() where the IDA is freed). If another thread is holding a reference to the class, then only once all balancing device_put() calls (in turn calling kobject_put()) have been made will the IDA be released and usable again. Normally this isn't a problem because the kobject is released before anything else that may want to use the same number tries to again, but with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty easy to try to allocate an alias from the IDA twice while the first time it was allocated is still pending a call to ida_simple_remove(). It's also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and probe defering a driver at boot that calls mmc_alloc_host() before trying to get resources that may defer likes clks or regulators. Instead of allocating from the IDA in this scenario, let's just skip it if we know this is an OF alias. The number is already "claimed" and devices that aren't using OF aliases won't try to use the claimed numbers anyway (see mmc_first_nonreserved_index()). This should avoid any issues with mmc_alloc_host() returning failures from the ida_simple_get() in the case that we're using an OF alias. Cc: Matthias Schiffer Cc: Sujit Kautkar Reported-by: Zubin Mithra Fixes: fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/core/host.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index eda4a1892c33..0475d96047c4 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -75,7 +75,8 @@ static void mmc_host_classdev_release(struct device *dev) { struct mmc_host *host = cls_dev_to_mmc_host(dev); wakeup_source_unregister(host->ws); - ida_simple_remove(&mmc_host_ida, host->index); + if (of_alias_get_id(host->parent->of_node, "mmc") < 0) + ida_simple_remove(&mmc_host_ida, host->index); kfree(host); } @@ -502,7 +503,7 @@ static int mmc_first_nonreserved_index(void) */ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) { - int err; + int index; struct mmc_host *host; int alias_id, min_idx, max_idx; @@ -515,20 +516,19 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) alias_id = of_alias_get_id(dev->of_node, "mmc"); if (alias_id >= 0) { - min_idx = alias_id; - max_idx = alias_id + 1; + index = alias_id; } else { min_idx = mmc_first_nonreserved_index(); max_idx = 0; - } - err = ida_simple_get(&mmc_host_ida, min_idx, max_idx, GFP_KERNEL); - if (err < 0) { - kfree(host); - return NULL; + index = ida_simple_get(&mmc_host_ida, min_idx, max_idx, GFP_KERNEL); + if (index < 0) { + kfree(host); + return NULL; + } } - host->index = err; + host->index = index; dev_set_name(&host->class_dev, "mmc%d", host->index); host->ws = wakeup_source_register(NULL, dev_name(&host->class_dev)); -- cgit v1.2.3-58-ga151 From 775da83005cb61d4c213c636df9337da05714ff1 Mon Sep 17 00:00:00 2001 From: Jinzhou Su Date: Tue, 13 Jul 2021 09:26:11 +0800 Subject: drm/amdgpu: add another Renoir DID Add new PCI device id. Signed-off-by: Jinzhou Su Reviewed-by: Huang Rui Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 5.11.x --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 71beb0db0125..abb928894eac 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -1168,6 +1168,7 @@ static const struct pci_device_id pciidlist[] = { {0x1002, 0x734F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI14}, /* Renoir */ + {0x1002, 0x15E7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RENOIR|AMD_IS_APU}, {0x1002, 0x1636, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RENOIR|AMD_IS_APU}, {0x1002, 0x1638, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RENOIR|AMD_IS_APU}, {0x1002, 0x164C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RENOIR|AMD_IS_APU}, -- cgit v1.2.3-58-ga151 From 9c23aa51477a37f8b56c3c40192248db0663c196 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 14 Jul 2021 19:00:21 +0200 Subject: r8152: Fix potential PM refcount imbalance rtl8152_close() takes the refcount via usb_autopm_get_interface() but it doesn't release when RTL8152_UNPLUG test hits. This may lead to the imbalance of PM refcount. This patch addresses it. Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194 Signed-off-by: Takashi Iwai Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 1692d3b1b6e1..4096e20e9725 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -6763,9 +6763,10 @@ static int rtl8152_close(struct net_device *netdev) tp->rtl_ops.down(tp); mutex_unlock(&tp->control); + } + if (!res) usb_autopm_put_interface(tp->intf); - } free_all_mem(tp); -- cgit v1.2.3-58-ga151 From 776ac63a986d211286230c4fd70f85390eabedcd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 14 Jul 2021 19:00:22 +0200 Subject: r8152: Fix a deadlock by doubly PM resume r8152 driver sets up the MAC address at reset-resume, while rtl8152_set_mac_address() has the temporary autopm get/put. This may lead to a deadlock as the PM lock has been already taken for the execution of the runtime PM callback. This patch adds the workaround to avoid the superfluous autpm when called from rtl8152_reset_resume(). Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194 Signed-off-by: Takashi Iwai Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 4096e20e9725..e09b107b5c99 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1552,7 +1552,8 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex, u32 advertising); -static int rtl8152_set_mac_address(struct net_device *netdev, void *p) +static int __rtl8152_set_mac_address(struct net_device *netdev, void *p, + bool in_resume) { struct r8152 *tp = netdev_priv(netdev); struct sockaddr *addr = p; @@ -1561,9 +1562,11 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p) if (!is_valid_ether_addr(addr->sa_data)) goto out1; - ret = usb_autopm_get_interface(tp->intf); - if (ret < 0) - goto out1; + if (!in_resume) { + ret = usb_autopm_get_interface(tp->intf); + if (ret < 0) + goto out1; + } mutex_lock(&tp->control); @@ -1575,11 +1578,17 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p) mutex_unlock(&tp->control); - usb_autopm_put_interface(tp->intf); + if (!in_resume) + usb_autopm_put_interface(tp->intf); out1: return ret; } +static int rtl8152_set_mac_address(struct net_device *netdev, void *p) +{ + return __rtl8152_set_mac_address(netdev, p, false); +} + /* Devices containing proper chips can support a persistent * host system provided MAC address. * Examples of this are Dell TB15 and Dell WD15 docks @@ -1698,7 +1707,7 @@ static int determine_ethernet_addr(struct r8152 *tp, struct sockaddr *sa) return ret; } -static int set_ethernet_addr(struct r8152 *tp) +static int set_ethernet_addr(struct r8152 *tp, bool in_resume) { struct net_device *dev = tp->netdev; struct sockaddr sa; @@ -1711,7 +1720,7 @@ static int set_ethernet_addr(struct r8152 *tp) if (tp->version == RTL_VER_01) ether_addr_copy(dev->dev_addr, sa.sa_data); else - ret = rtl8152_set_mac_address(dev, &sa); + ret = __rtl8152_set_mac_address(dev, &sa, in_resume); return ret; } @@ -8444,7 +8453,7 @@ static int rtl8152_reset_resume(struct usb_interface *intf) clear_bit(SELECTIVE_SUSPEND, &tp->flags); tp->rtl_ops.init(tp); queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0); - set_ethernet_addr(tp); + set_ethernet_addr(tp, true); return rtl8152_resume(intf); } @@ -9645,7 +9654,7 @@ static int rtl8152_probe(struct usb_interface *intf, tp->rtl_fw.retry = true; #endif queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0); - set_ethernet_addr(tp); + set_ethernet_addr(tp, false); usb_set_intfdata(intf, tp); -- cgit v1.2.3-58-ga151 From 58b63e0f556c2debb8c942abcc9e6beadc4a07f0 Mon Sep 17 00:00:00 2001 From: Guoqing Jiang Date: Tue, 6 Jul 2021 09:07:34 +0800 Subject: pd: fix order of cleaning up the queue and freeing the tagset We must release the queue before freeing the tagset. Fixes: 262d431f9000 ("pd: use blk_mq_alloc_disk and blk_cleanup_disk") Signed-off-by: Guoqing Jiang Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210706010734.1356066-1-guoqing.jiang@linux.dev Signed-off-by: Jens Axboe --- drivers/block/paride/pd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 3b2b8e872beb..9b3298926356 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -1014,8 +1014,8 @@ static void __exit pd_exit(void) if (p) { disk->gd = NULL; del_gendisk(p); - blk_mq_free_tag_set(&disk->tag_set); blk_cleanup_disk(p); + blk_mq_free_tag_set(&disk->tag_set); pi_release(disk->pi); } } -- cgit v1.2.3-58-ga151 From 16ad3db3b24cd9f70aa24e93cef0d4a83dece7ac Mon Sep 17 00:00:00 2001 From: Wang Qing Date: Tue, 6 Jul 2021 12:00:16 +0800 Subject: nbd: fix order of cleaning up the queue and freeing the tagset We must release the queue before freeing the tagset. Fixes: 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk") Reported-and-tested-by: syzbot+9ca43ff47167c0ee3466@syzkaller.appspotmail.com Signed-off-by: Wang Qing Signed-off-by: Guoqing Jiang Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210706040016.1360412-1-guoqing.jiang@linux.dev Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index b7d663736d35..c38317979f74 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -239,8 +239,8 @@ static void nbd_dev_remove(struct nbd_device *nbd) if (disk) { del_gendisk(disk); - blk_mq_free_tag_set(&nbd->tag_set); blk_cleanup_disk(disk); + blk_mq_free_tag_set(&nbd->tag_set); } /* -- cgit v1.2.3-58-ga151 From 05d69d950d9d84218fc9beafd02dea1f6a70e09e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 15 Jul 2021 16:17:11 +0200 Subject: xen-blkfront: sanitize the removal state machine xen-blkfront has a weird protocol where close message from the remote side can be delayed, and where hot removals are treated somewhat differently from regular removals, all leading to potential NULL pointer removals, and a del_gendisk from the block device release method, which will deadlock. Fix this by just performing normal hot removals even when the device is opened like all other Linux block drivers. Fixes: c76f48eb5c08 ("block: take bd_mutex around delete_partitions in del_gendisk") Reported-by: Vitaly Kuznetsov Signed-off-by: Christoph Hellwig Tested-by: Vitaly Kuznetsov Link: https://lore.kernel.org/r/20210715141711.1257293-1-hch@lst.de Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 224 +++++-------------------------------------- 1 file changed, 26 insertions(+), 198 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 8d49f8fa98bb..d83fee21f6c5 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -502,34 +502,21 @@ static int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg) static int blkif_ioctl(struct block_device *bdev, fmode_t mode, unsigned command, unsigned long argument) { - struct blkfront_info *info = bdev->bd_disk->private_data; int i; - dev_dbg(&info->xbdev->dev, "command: 0x%x, argument: 0x%lx\n", - command, (long)argument); - switch (command) { case CDROMMULTISESSION: - dev_dbg(&info->xbdev->dev, "FIXME: support multisession CDs later\n"); for (i = 0; i < sizeof(struct cdrom_multisession); i++) if (put_user(0, (char __user *)(argument + i))) return -EFAULT; return 0; - - case CDROM_GET_CAPABILITY: { - struct gendisk *gd = info->gd; - if (gd->flags & GENHD_FL_CD) + case CDROM_GET_CAPABILITY: + if (bdev->bd_disk->flags & GENHD_FL_CD) return 0; return -EINVAL; - } - default: - /*printk(KERN_ALERT "ioctl %08x not supported by Xen blkdev\n", - command);*/ - return -EINVAL; /* same return as native Linux */ + return -EINVAL; } - - return 0; } static unsigned long blkif_ring_get_request(struct blkfront_ring_info *rinfo, @@ -1177,36 +1164,6 @@ out_release_minors: return err; } -static void xlvbd_release_gendisk(struct blkfront_info *info) -{ - unsigned int minor, nr_minors, i; - struct blkfront_ring_info *rinfo; - - if (info->rq == NULL) - return; - - /* No more blkif_request(). */ - blk_mq_stop_hw_queues(info->rq); - - for_each_rinfo(info, rinfo, i) { - /* No more gnttab callback work. */ - gnttab_cancel_free_callback(&rinfo->callback); - - /* Flush gnttab callback work. Must be done with no locks held. */ - flush_work(&rinfo->work); - } - - del_gendisk(info->gd); - - minor = info->gd->first_minor; - nr_minors = info->gd->minors; - xlbd_release_minors(minor, nr_minors); - - blk_cleanup_disk(info->gd); - info->gd = NULL; - blk_mq_free_tag_set(&info->tag_set); -} - /* Already hold rinfo->ring_lock. */ static inline void kick_pending_request_queues_locked(struct blkfront_ring_info *rinfo) { @@ -1756,12 +1713,6 @@ abort_transaction: return err; } -static void free_info(struct blkfront_info *info) -{ - list_del(&info->info_list); - kfree(info); -} - /* Common code used when first setting up, and when resuming. */ static int talk_to_blkback(struct xenbus_device *dev, struct blkfront_info *info) @@ -1880,13 +1831,6 @@ again: xenbus_dev_fatal(dev, err, "%s", message); destroy_blkring: blkif_free(info, 0); - - mutex_lock(&blkfront_mutex); - free_info(info); - mutex_unlock(&blkfront_mutex); - - dev_set_drvdata(&dev->dev, NULL); - return err; } @@ -2126,38 +2070,26 @@ static int blkfront_resume(struct xenbus_device *dev) static void blkfront_closing(struct blkfront_info *info) { struct xenbus_device *xbdev = info->xbdev; - struct block_device *bdev = NULL; - - mutex_lock(&info->mutex); + struct blkfront_ring_info *rinfo; + unsigned int i; - if (xbdev->state == XenbusStateClosing) { - mutex_unlock(&info->mutex); + if (xbdev->state == XenbusStateClosing) return; - } - if (info->gd) - bdev = bdgrab(info->gd->part0); - - mutex_unlock(&info->mutex); - - if (!bdev) { - xenbus_frontend_closed(xbdev); - return; - } + /* No more blkif_request(). */ + blk_mq_stop_hw_queues(info->rq); + blk_set_queue_dying(info->rq); + set_capacity(info->gd, 0); - mutex_lock(&bdev->bd_disk->open_mutex); + for_each_rinfo(info, rinfo, i) { + /* No more gnttab callback work. */ + gnttab_cancel_free_callback(&rinfo->callback); - if (bdev->bd_openers) { - xenbus_dev_error(xbdev, -EBUSY, - "Device in use; refusing to close"); - xenbus_switch_state(xbdev, XenbusStateClosing); - } else { - xlvbd_release_gendisk(info); - xenbus_frontend_closed(xbdev); + /* Flush gnttab callback work. Must be done with no locks held. */ + flush_work(&rinfo->work); } - mutex_unlock(&bdev->bd_disk->open_mutex); - bdput(bdev); + xenbus_frontend_closed(xbdev); } static void blkfront_setup_discard(struct blkfront_info *info) @@ -2472,8 +2404,7 @@ static void blkback_changed(struct xenbus_device *dev, break; fallthrough; case XenbusStateClosing: - if (info) - blkfront_closing(info); + blkfront_closing(info); break; } } @@ -2481,56 +2412,21 @@ static void blkback_changed(struct xenbus_device *dev, static int blkfront_remove(struct xenbus_device *xbdev) { struct blkfront_info *info = dev_get_drvdata(&xbdev->dev); - struct block_device *bdev = NULL; - struct gendisk *disk; dev_dbg(&xbdev->dev, "%s removed", xbdev->nodename); - if (!info) - return 0; - - blkif_free(info, 0); - - mutex_lock(&info->mutex); - - disk = info->gd; - if (disk) - bdev = bdgrab(disk->part0); - - info->xbdev = NULL; - mutex_unlock(&info->mutex); - - if (!bdev) { - mutex_lock(&blkfront_mutex); - free_info(info); - mutex_unlock(&blkfront_mutex); - return 0; - } - - /* - * The xbdev was removed before we reached the Closed - * state. See if it's safe to remove the disk. If the bdev - * isn't closed yet, we let release take care of it. - */ - - mutex_lock(&disk->open_mutex); - info = disk->private_data; - - dev_warn(disk_to_dev(disk), - "%s was hot-unplugged, %d stale handles\n", - xbdev->nodename, bdev->bd_openers); + del_gendisk(info->gd); - if (info && !bdev->bd_openers) { - xlvbd_release_gendisk(info); - disk->private_data = NULL; - mutex_lock(&blkfront_mutex); - free_info(info); - mutex_unlock(&blkfront_mutex); - } + mutex_lock(&blkfront_mutex); + list_del(&info->info_list); + mutex_unlock(&blkfront_mutex); - mutex_unlock(&disk->open_mutex); - bdput(bdev); + blkif_free(info, 0); + xlbd_release_minors(info->gd->first_minor, info->gd->minors); + blk_cleanup_disk(info->gd); + blk_mq_free_tag_set(&info->tag_set); + kfree(info); return 0; } @@ -2541,77 +2437,9 @@ static int blkfront_is_ready(struct xenbus_device *dev) return info->is_ready && info->xbdev; } -static int blkif_open(struct block_device *bdev, fmode_t mode) -{ - struct gendisk *disk = bdev->bd_disk; - struct blkfront_info *info; - int err = 0; - - mutex_lock(&blkfront_mutex); - - info = disk->private_data; - if (!info) { - /* xbdev gone */ - err = -ERESTARTSYS; - goto out; - } - - mutex_lock(&info->mutex); - - if (!info->gd) - /* xbdev is closed */ - err = -ERESTARTSYS; - - mutex_unlock(&info->mutex); - -out: - mutex_unlock(&blkfront_mutex); - return err; -} - -static void blkif_release(struct gendisk *disk, fmode_t mode) -{ - struct blkfront_info *info = disk->private_data; - struct xenbus_device *xbdev; - - mutex_lock(&blkfront_mutex); - if (disk->part0->bd_openers) - goto out_mutex; - - /* - * Check if we have been instructed to close. We will have - * deferred this request, because the bdev was still open. - */ - - mutex_lock(&info->mutex); - xbdev = info->xbdev; - - if (xbdev && xbdev->state == XenbusStateClosing) { - /* pending switch to state closed */ - dev_info(disk_to_dev(disk), "releasing disk\n"); - xlvbd_release_gendisk(info); - xenbus_frontend_closed(info->xbdev); - } - - mutex_unlock(&info->mutex); - - if (!xbdev) { - /* sudden device removal */ - dev_info(disk_to_dev(disk), "releasing disk\n"); - xlvbd_release_gendisk(info); - disk->private_data = NULL; - free_info(info); - } - -out_mutex: - mutex_unlock(&blkfront_mutex); -} - static const struct block_device_operations xlvbd_block_fops = { .owner = THIS_MODULE, - .open = blkif_open, - .release = blkif_release, .getgeo = blkif_getgeo, .ioctl = blkif_ioctl, .compat_ioctl = blkdev_compat_ptr_ioctl, -- cgit v1.2.3-58-ga151 From 99bb2ebab953435852340cdb198c5abbf0bb5dd3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 14 Jul 2021 11:58:12 +0200 Subject: net: dsa: mv88e6xxx: NET_DSA_MV88E6XXX_PTP should depend on NET_DSA_MV88E6XXX Making global2 support mandatory removed the Kconfig symbol NET_DSA_MV88E6XXX_GLOBAL2. This symbol also served as an intermediate symbol to make NET_DSA_MV88E6XXX_PTP depend on NET_DSA_MV88E6XXX. With the symbol removed, the user is always asked about PTP support for Marvell 88E6xxx switches, even if the latter support is not enabled. Fix this by reinstating the dependency. Fixes: 63368a7416df144b ("net: dsa: mv88e6xxx: Make global2 support mandatory") Signed-off-by: Geert Uytterhoeven Reviewed-by: Andrew Lunn Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/Kconfig b/drivers/net/dsa/mv88e6xxx/Kconfig index 05af632b0f59..634a48e6616b 100644 --- a/drivers/net/dsa/mv88e6xxx/Kconfig +++ b/drivers/net/dsa/mv88e6xxx/Kconfig @@ -12,7 +12,7 @@ config NET_DSA_MV88E6XXX config NET_DSA_MV88E6XXX_PTP bool "PTP support for Marvell 88E6xxx" default n - depends on PTP_1588_CLOCK + depends on NET_DSA_MV88E6XXX && PTP_1588_CLOCK help Say Y to enable PTP hardware timestamping on Marvell 88E6xxx switch chips that support it. -- cgit v1.2.3-58-ga151 From e7efc2ce3d0789cd7c21b70ff00cd7838d382639 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 14 Jul 2021 16:23:43 +0100 Subject: liquidio: Fix unintentional sign extension issue on left shift of u16 Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS (29) bits will be promoted to a 32 bit signed int and then sign-extended to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7) the shifted value will be sign extended and the top 32 bits of the result will be set. Fix this by casting the u16 values to a u64 before the 29 bit left shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 3451b97cce2d ("liquidio: CN23XX register setup") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c index 4cddd628d41b..9ed3d1ab2ca5 100644 --- a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c +++ b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c @@ -420,7 +420,7 @@ static int cn23xx_pf_setup_global_input_regs(struct octeon_device *oct) * bits 32:47 indicate the PVF num. */ for (q_no = 0; q_no < ern; q_no++) { - reg_val = oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS; + reg_val = (u64)oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS; /* for VF assigned queues. */ if (q_no < oct->sriov_info.pf_srn) { -- cgit v1.2.3-58-ga151 From 55cef88bbf12f3bfbe5c2379a8868a034707e755 Mon Sep 17 00:00:00 2001 From: Yoshitaka Ikeda Date: Thu, 15 Jul 2021 16:21:32 +0000 Subject: spi: spi-cadence-quadspi: Fix division by zero warning Fix below division by zero warning: - Added an if statement because buswidth can be zero, resulting in division by zero. - The modified code was based on another driver (atmel-quadspi). [ 0.795337] Division by zero in kernel. : [ 0.834051] [<807fd40c>] (__div0) from [<804e1acc>] (Ldiv0+0x8/0x10) [ 0.839097] [<805f0710>] (cqspi_exec_mem_op) from [<805edb4c>] (spi_mem_exec_op+0x3b0/0x3f8) Fixes: 7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1") Signed-off-by: Yoshitaka Ikeda Link: https://lore.kernel.org/r/ed989af6-da88-4e0b-9ed8-126db6cad2e4@nskint.co.jp Signed-off-by: Mark Brown --- drivers/spi/spi-cadence-quadspi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 7a00346ff9b9..13d1f0ce618e 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -307,11 +307,13 @@ static unsigned int cqspi_calc_rdreg(struct cqspi_flash_pdata *f_pdata) static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr) { - unsigned int dummy_clk; + unsigned int dummy_clk = 0; - dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth); - if (dtr) - dummy_clk /= 2; + if (op->dummy.buswidth && op->dummy.nbytes) { + dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth); + if (dtr) + dummy_clk /= 2; + } return dummy_clk; } -- cgit v1.2.3-58-ga151 From a1c9ca5f65c9acfd7c02474b9d5cacbd7ea288df Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 15 Jul 2021 11:55:31 -0700 Subject: EDAC/igen6: fix core dependency AGAIN My previous patch had a typo/thinko which prevents this driver from being enabled: change X64_64 to X86_64. Fixes: 0a9ece9ba154 ("EDAC/igen6: fix core dependency") Signed-off-by: Randy Dunlap Cc: Qiuxu Zhuo Cc: Borislav Petkov Cc: Mauro Carvalho Chehab Cc: linux-edac@vger.kernel.org Cc: bowsingbetee Cc: stable@vger.kernel.org Signed-off-by: Tony Luck Signed-off-by: Linus Torvalds --- drivers/edac/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 91164c5f0757..2fc4c3f91fd5 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -271,7 +271,7 @@ config EDAC_PND2 config EDAC_IGEN6 tristate "Intel client SoC Integrated MC" depends on PCI && PCI_MMCONFIG && ARCH_HAVE_NMI_SAFE_CMPXCHG - depends on X64_64 && X86_MCE_INTEL + depends on X86_64 && X86_MCE_INTEL help Support for error detection and correction on the Intel client SoC Integrated Memory Controller using In-Band ECC IP. -- cgit v1.2.3-58-ga151 From 6206b7981a36476f4695d661ae139f7db36a802d Mon Sep 17 00:00:00 2001 From: Jia He Date: Thu, 15 Jul 2021 16:08:21 +0800 Subject: qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union() Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by: Lijian Zhang Signed-off-by: Jia He Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 4387292c37e2..79d879a5d663 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -474,14 +474,18 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); - if (!qed_mcp_has_pending_cmd(p_hwfn)) + if (!qed_mcp_has_pending_cmd(p_hwfn)) { + spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); break; + } rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt); - if (!rc) + if (!rc) { + spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); break; - else if (rc != -EAGAIN) + } else if (rc != -EAGAIN) { goto err; + } spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); @@ -498,6 +502,8 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, return -EAGAIN; } + spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); + /* Send the mailbox command */ qed_mcp_reread_offsets(p_hwfn, p_ptt); seq_num = ++p_hwfn->mcp_info->drv_mb_seq; @@ -524,14 +530,18 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); - if (p_cmd_elem->b_is_completed) + if (p_cmd_elem->b_is_completed) { + spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); break; + } rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt); - if (!rc) + if (!rc) { + spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); break; - else if (rc != -EAGAIN) + } else if (rc != -EAGAIN) { goto err; + } spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); } while (++cnt < max_retries); @@ -554,6 +564,7 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, return -EAGAIN; } + spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); qed_mcp_cmd_del_elem(p_hwfn, p_cmd_elem); spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); -- cgit v1.2.3-58-ga151 From a6ecfb39ba9d7316057cea823b196b734f6b18ca Mon Sep 17 00:00:00 2001 From: Dongliang Mu Date: Wed, 14 Jul 2021 17:13:22 +0800 Subject: usb: hso: fix error handling code of hso_create_net_device The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 63006838bdcc..dec96e8ab567 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2495,7 +2495,7 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface, hso_net_init); if (!net) { dev_err(&interface->dev, "Unable to create ethernet device\n"); - goto exit; + goto err_hso_dev; } hso_net = netdev_priv(net); @@ -2508,13 +2508,13 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface, USB_DIR_IN); if (!hso_net->in_endp) { dev_err(&interface->dev, "Can't find BULK IN endpoint\n"); - goto exit; + goto err_net; } hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT); if (!hso_net->out_endp) { dev_err(&interface->dev, "Can't find BULK OUT endpoint\n"); - goto exit; + goto err_net; } SET_NETDEV_DEV(net, &interface->dev); SET_NETDEV_DEVTYPE(net, &hso_type); @@ -2523,18 +2523,18 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface, for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL); if (!hso_net->mux_bulk_rx_urb_pool[i]) - goto exit; + goto err_mux_bulk_rx; hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE, GFP_KERNEL); if (!hso_net->mux_bulk_rx_buf_pool[i]) - goto exit; + goto err_mux_bulk_rx; } hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!hso_net->mux_bulk_tx_urb) - goto exit; + goto err_mux_bulk_rx; hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL); if (!hso_net->mux_bulk_tx_buf) - goto exit; + goto err_free_tx_urb; add_net_device(hso_dev); @@ -2542,7 +2542,7 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface, result = register_netdev(net); if (result) { dev_err(&interface->dev, "Failed to register device\n"); - goto exit; + goto err_free_tx_buf; } hso_log_port(hso_dev); @@ -2550,8 +2550,21 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface, hso_create_rfkill(hso_dev, interface); return hso_dev; -exit: - hso_free_net_device(hso_dev, true); + +err_free_tx_buf: + remove_net_device(hso_dev); + kfree(hso_net->mux_bulk_tx_buf); +err_free_tx_urb: + usb_free_urb(hso_net->mux_bulk_tx_urb); +err_mux_bulk_rx: + for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { + usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]); + kfree(hso_net->mux_bulk_rx_buf_pool[i]); + } +err_net: + free_netdev(net); +err_hso_dev: + kfree(hso_dev); return NULL; } -- cgit v1.2.3-58-ga151 From 0ccfd1ba84a4503b509250941af149e9ebd605ca Mon Sep 17 00:00:00 2001 From: Yoshitaka Ikeda Date: Fri, 16 Jul 2021 14:33:12 +0000 Subject: spi: spi-cadence-quadspi: Revert "Fix division by zero warning" Revert to change to a better code. This reverts commit 55cef88bbf12f3bfbe5c2379a8868a034707e755. Signed-off-by: Yoshitaka Ikeda Link: https://lore.kernel.org/r/bd30bdb4-07c4-f713-5648-01c898d51f1b@nskint.co.jp Signed-off-by: Mark Brown --- drivers/spi/spi-cadence-quadspi.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 13d1f0ce618e..7a00346ff9b9 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -307,13 +307,11 @@ static unsigned int cqspi_calc_rdreg(struct cqspi_flash_pdata *f_pdata) static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr) { - unsigned int dummy_clk = 0; + unsigned int dummy_clk; - if (op->dummy.buswidth && op->dummy.nbytes) { - dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth); - if (dtr) - dummy_clk /= 2; - } + dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth); + if (dtr) + dummy_clk /= 2; return dummy_clk; } -- cgit v1.2.3-58-ga151 From 0e85ee897858b1c7a5de53f496d016899d9639c5 Mon Sep 17 00:00:00 2001 From: Yoshitaka Ikeda Date: Fri, 16 Jul 2021 14:35:13 +0000 Subject: spi: spi-cadence-quadspi: Fix division by zero warning Fix below division by zero warning: - The reason for dividing by zero is because the dummy bus width is zero, but if the dummy n bytes is zero, it indicates that there is no data transfer, so we can just return zero without doing any calculations. [ 0.795337] Division by zero in kernel. : [ 0.834051] [<807fd40c>] (__div0) from [<804e1acc>] (Ldiv0+0x8/0x10) [ 0.839097] [<805f0710>] (cqspi_exec_mem_op) from [<805edb4c>] (spi_mem_exec_op+0x3b0/0x3f8) Fixes: 7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1") Signed-off-by: Yoshitaka Ikeda Reviewed-by: Pratyush Yadav Link: https://lore.kernel.org/r/92eea403-9b21-2488-9cc1-664bee760c5e@nskint.co.jp Signed-off-by: Mark Brown --- drivers/spi/spi-cadence-quadspi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 7a00346ff9b9..d62d69dd72b9 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -309,6 +309,9 @@ static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr) { unsigned int dummy_clk; + if (!op->dummy.nbytes) + return 0; + dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth); if (dtr) dummy_clk /= 2; -- cgit v1.2.3-58-ga151 From 674a9f1f6815849bfb5bf385e7da8fc198aaaba9 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Thu, 8 Jul 2021 11:46:54 +0200 Subject: efi/tpm: Differentiate missing and invalid final event log table. Missing TPM final event log table is not a firmware bug. Clearly if providing event log in the old format makes the final event log invalid it should not be provided at least in that case. Fixes: b4f1874c6216 ("tpm: check event log version before reading final events") Signed-off-by: Michal Suchanek Reviewed-by: Jarkko Sakkinen Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/tpm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/tpm.c b/drivers/firmware/efi/tpm.c index c1955d320fec..8f665678e9e3 100644 --- a/drivers/firmware/efi/tpm.c +++ b/drivers/firmware/efi/tpm.c @@ -62,9 +62,11 @@ int __init efi_tpm_eventlog_init(void) tbl_size = sizeof(*log_tbl) + log_tbl->size; memblock_reserve(efi.tpm_log, tbl_size); - if (efi.tpm_final_log == EFI_INVALID_TABLE_ADDR || - log_tbl->version != EFI_TCG2_EVENT_LOG_FORMAT_TCG_2) { - pr_warn(FW_BUG "TPM Final Events table missing or invalid\n"); + if (efi.tpm_final_log == EFI_INVALID_TABLE_ADDR) { + pr_info("TPM Final Events table not present\n"); + goto out; + } else if (log_tbl->version != EFI_TCG2_EVENT_LOG_FORMAT_TCG_2) { + pr_warn(FW_BUG "TPM Final Events table invalid\n"); goto out; } -- cgit v1.2.3-58-ga151 From 2bab693a608bdf614b9fcd44083c5100f34b9f77 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 13 Jul 2021 19:43:26 +0100 Subject: firmware/efi: Tell memblock about EFI iomem reservations kexec_load_file() relies on the memblock infrastructure to avoid stamping over regions of memory that are essential to the survival of the system. However, nobody seems to agree how to flag these regions as reserved, and (for example) EFI only publishes its reservations in /proc/iomem for the benefit of the traditional, userspace based kexec tool. On arm64 platforms with GICv3, this can result in the payload being placed at the location of the LPI tables. Shock, horror! Let's augment the EFI reservation code with a memblock_reserve() call, protecting our dear tables from the secondary kernel invasion. Reported-by: Moritz Fischer Tested-by: Moritz Fischer Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Cc: Ard Biesheuvel Cc: James Morse Cc: Catalin Marinas Cc: Will Deacon Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/efi.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 4b7ee3fa9224..847f33ffc4ae 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -896,6 +896,7 @@ static int __init efi_memreserve_map_root(void) static int efi_mem_reserve_iomem(phys_addr_t addr, u64 size) { struct resource *res, *parent; + int ret; res = kzalloc(sizeof(struct resource), GFP_ATOMIC); if (!res) @@ -908,7 +909,17 @@ static int efi_mem_reserve_iomem(phys_addr_t addr, u64 size) /* we expect a conflict with a 'System RAM' region */ parent = request_resource_conflict(&iomem_resource, res); - return parent ? request_resource(parent, res) : 0; + ret = parent ? request_resource(parent, res) : 0; + + /* + * Given that efi_mem_reserve_iomem() can be called at any + * time, only call memblock_reserve() if the architecture + * keeps the infrastructure around. + */ + if (IS_ENABLED(CONFIG_ARCH_KEEP_MEMBLOCK) && !ret) + memblock_reserve(addr, size); + + return ret; } int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) -- cgit v1.2.3-58-ga151 From 947228cb9f1a2c69a5da5279c48f02bb4f49ce32 Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Fri, 2 Jul 2021 12:10:44 -0700 Subject: efi/libstub: Fix the efi_load_initrd function description The soft_limit and hard_limit in the function efi_load_initrd describes the preferred and max address of initrd loading location respectively. However, the description wrongly describes it as the size of the allocated memory. Fix the function description. Signed-off-by: Atish Patra Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/efi-stub-helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c index aa8da0a49829..ae87dded989d 100644 --- a/drivers/firmware/efi/libstub/efi-stub-helper.c +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c @@ -630,8 +630,8 @@ efi_status_t efi_load_initrd_cmdline(efi_loaded_image_t *image, * @image: EFI loaded image protocol * @load_addr: pointer to loaded initrd * @load_size: size of loaded initrd - * @soft_limit: preferred size of allocated memory for loading the initrd - * @hard_limit: minimum size of allocated memory + * @soft_limit: preferred address for loading the initrd + * @hard_limit: upper limit address for loading the initrd * * Return: status code */ -- cgit v1.2.3-58-ga151 From 9cb2ff11171264d10be7ea9e31d9ee5d49ba84a5 Mon Sep 17 00:00:00 2001 From: Apurva Nandan Date: Tue, 13 Jul 2021 12:57:41 +0000 Subject: spi: cadence-quadspi: Disable Auto-HW polling cadence-quadspi has a builtin Auto-HW polling funtionality using which it keep tracks of completion of write operations. When Auto-HW polling is enabled, it automatically initiates status register read operation, until the flash clears its busy bit. cadence-quadspi controller doesn't allow an address phase when auto-polling the busy bit on the status register. Unlike SPI NOR flashes, SPI NAND flashes do require the address of status register when polling the busy bit using the read register operation. As Auto-HW polling is enabled by default, cadence-quadspi returns a timeout for every write operation after an indefinite amount of polling on SPI NAND flashes. Disable Auto-HW polling completely as the spi-nor core, spinand core, etc. take care of polling the busy bit on their own. Signed-off-by: Apurva Nandan Link: https://lore.kernel.org/r/20210713125743.1540-2-a-nandan@ti.com Signed-off-by: Mark Brown --- drivers/spi/spi-cadence-quadspi.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index d62d69dd72b9..a2de23516553 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -800,19 +800,20 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata, reg = cqspi_calc_rdreg(f_pdata); writel(reg, reg_base + CQSPI_REG_RD_INSTR); - if (f_pdata->dtr) { - /* - * Some flashes like the cypress Semper flash expect a 4-byte - * dummy address with the Read SR command in DTR mode, but this - * controller does not support sending address with the Read SR - * command. So, disable write completion polling on the - * controller's side. spi-nor will take care of polling the - * status register. - */ - reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL); - reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL; - writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL); - } + /* + * SPI NAND flashes require the address of the status register to be + * passed in the Read SR command. Also, some SPI NOR flashes like the + * cypress Semper flash expect a 4-byte dummy address in the Read SR + * command in DTR mode. + * + * But this controller does not support address phase in the Read SR + * command when doing auto-HW polling. So, disable write completion + * polling on the controller's side. spinand and spi-nor will take + * care of polling the status register. + */ + reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL); + reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL; + writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL); reg = readl(reg_base + CQSPI_REG_SIZE); reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; -- cgit v1.2.3-58-ga151 From ea272ce46f3c86d15d9b58bd4d8d44de6cee04b7 Mon Sep 17 00:00:00 2001 From: Veerabadhran Gopalakrishnan Date: Fri, 9 Jul 2021 13:00:11 +0530 Subject: amdgpu/nv.c - Added video codec support for Yellow Carp Added the supported codecs in the video capabilities query. Signed-off-by: Veerabadhran Gopalakrishnan Reviewed-by: James Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/nv.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c index 94a2c0742ee5..04f6cf38c552 100644 --- a/drivers/gpu/drm/amd/amdgpu/nv.c +++ b/drivers/gpu/drm/amd/amdgpu/nv.c @@ -333,6 +333,19 @@ static const struct amdgpu_video_codecs bg_video_codecs_encode = { .codec_array = NULL, }; +/* Yellow Carp*/ +static const struct amdgpu_video_codec_info yc_video_codecs_decode_array[] = { + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 4906, 52)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 8192, 4352, 186)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, 8192, 4352, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, 4096, 4096, 0)}, +}; + +static const struct amdgpu_video_codecs yc_video_codecs_decode = { + .codec_count = ARRAY_SIZE(bg_video_codecs_decode_array), + .codec_array = bg_video_codecs_decode_array, +}; + static int nv_query_video_codecs(struct amdgpu_device *adev, bool encode, const struct amdgpu_video_codecs **codecs) { @@ -353,12 +366,17 @@ static int nv_query_video_codecs(struct amdgpu_device *adev, bool encode, case CHIP_NAVY_FLOUNDER: case CHIP_DIMGREY_CAVEFISH: case CHIP_VANGOGH: - case CHIP_YELLOW_CARP: if (encode) *codecs = &nv_video_codecs_encode; else *codecs = &sc_video_codecs_decode; return 0; + case CHIP_YELLOW_CARP: + if (encode) + *codecs = &nv_video_codecs_encode; + else + *codecs = &yc_video_codecs_decode; + return 0; case CHIP_BEIGE_GOBY: if (encode) *codecs = &bg_video_codecs_encode; -- cgit v1.2.3-58-ga151 From 6505d6fcc616472c1b4d6298beacf52673c7b072 Mon Sep 17 00:00:00 2001 From: Veerabadhran Gopalakrishnan Date: Tue, 13 Jul 2021 23:21:43 +0530 Subject: amdgpu/nv.c - Optimize code for video codec support structure Optimized the code for codec info structure initialization Signed-off-by: Veerabadhran Gopalakrishnan Reviewed-by: James Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 7 ++ drivers/gpu/drm/amd/amdgpu/nv.c | 223 +++++------------------------------- drivers/gpu/drm/amd/amdgpu/soc15.c | 176 ++++------------------------ 3 files changed, 56 insertions(+), 350 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index c0316eaba547..8ac6eb9f1fdb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -619,6 +619,13 @@ struct amdgpu_video_codec_info { u32 max_level; }; +#define codec_info_build(type, width, height, level) \ + .codec_type = type,\ + .max_width = width,\ + .max_height = height,\ + .max_pixels_per_frame = height * width,\ + .max_level = level, + struct amdgpu_video_codecs { const u32 codec_count; const struct amdgpu_video_codec_info *codec_array; diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c index 04f6cf38c552..cf73a6923203 100644 --- a/drivers/gpu/drm/amd/amdgpu/nv.c +++ b/drivers/gpu/drm/amd/amdgpu/nv.c @@ -64,32 +64,13 @@ #include "smuio_v11_0.h" #include "smuio_v11_0_6.h" -#define codec_info_build(type, width, height, level) \ - .codec_type = type,\ - .max_width = width,\ - .max_height = height,\ - .max_pixels_per_frame = height * width,\ - .max_level = level, - static const struct amd_ip_funcs nv_common_ip_funcs; /* Navi */ static const struct amdgpu_video_codec_info nv_video_codecs_encode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 2304, - .max_pixels_per_frame = 4096 * 2304, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 4096, - .max_height = 2304, - .max_pixels_per_frame = 4096 * 2304, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 2304, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 4096, 2304, 0)}, }; static const struct amdgpu_video_codecs nv_video_codecs_encode = @@ -101,55 +82,13 @@ static const struct amdgpu_video_codecs nv_video_codecs_encode = /* Navi1x */ static const struct amdgpu_video_codec_info nv_video_codecs_decode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 3, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 5, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 52, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 4, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 8192 * 4352, - .max_level = 186, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 8192 * 4352, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, 4096, 4906, 3)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, 4096, 4906, 5)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 4906, 52)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, 4096, 4906, 4)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 8192, 4352, 186)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, 4096, 4096, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, 8192, 4352, 0)}, }; static const struct amdgpu_video_codecs nv_video_codecs_decode = @@ -161,62 +100,14 @@ static const struct amdgpu_video_codecs nv_video_codecs_decode = /* Sienna Cichlid */ static const struct amdgpu_video_codec_info sc_video_codecs_decode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 3, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 5, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 52, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 4, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 8192 * 4352, - .max_level = 186, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 8192 * 4352, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 8192 * 4352, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, 4096, 4906, 3)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, 4096, 4906, 5)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 4906, 52)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, 4096, 4906, 4)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 8192, 4352, 186)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, 4096, 4096, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, 8192, 4352, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1, 8192, 4352, 0)}, }; static const struct amdgpu_video_codecs sc_video_codecs_decode = @@ -228,80 +119,20 @@ static const struct amdgpu_video_codecs sc_video_codecs_decode = /* SRIOV Sienna Cichlid, not const since data is controlled by host */ static struct amdgpu_video_codec_info sriov_sc_video_codecs_encode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 2304, - .max_pixels_per_frame = 4096 * 2304, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 4096, - .max_height = 2304, - .max_pixels_per_frame = 4096 * 2304, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 2304, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 4096, 2304, 0)}, }; static struct amdgpu_video_codec_info sriov_sc_video_codecs_decode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 3, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 5, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 52, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 4, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 8192 * 4352, - .max_level = 186, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 8192 * 4352, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 8192 * 4352, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, 4096, 4906, 3)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, 4096, 4906, 5)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 4906, 52)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, 4096, 4906, 4)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 8192, 4352, 186)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, 4096, 4096, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, 8192, 4352, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1, 8192, 4352, 0)}, }; static struct amdgpu_video_codecs sriov_sc_video_codecs_encode = diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index b02436401d46..b7d350be8050 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -88,20 +88,8 @@ /* Vega, Raven, Arcturus */ static const struct amdgpu_video_codec_info vega_video_codecs_encode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 2304, - .max_pixels_per_frame = 4096 * 2304, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 4096, - .max_height = 2304, - .max_pixels_per_frame = 4096 * 2304, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 2304, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 4096, 2304, 0)}, }; static const struct amdgpu_video_codecs vega_video_codecs_encode = @@ -113,48 +101,12 @@ static const struct amdgpu_video_codecs vega_video_codecs_encode = /* Vega */ static const struct amdgpu_video_codec_info vega_video_codecs_decode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 3, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 5, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 52, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 4, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 186, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, 4096, 4906, 3)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, 4096, 4906, 5)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 4906, 52)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, 4096, 4906, 4)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 4096, 4096, 186)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, 4096, 4096, 0)}, }; static const struct amdgpu_video_codecs vega_video_codecs_decode = @@ -166,55 +118,13 @@ static const struct amdgpu_video_codecs vega_video_codecs_decode = /* Raven */ static const struct amdgpu_video_codec_info rv_video_codecs_decode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 3, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 5, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 52, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 4, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 186, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, 4096, 4906, 3)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, 4096, 4906, 5)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 4906, 52)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, 4096, 4906, 4)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 4096, 4096, 186)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, 4096, 4096, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, 4096, 4096, 0)}, }; static const struct amdgpu_video_codecs rv_video_codecs_decode = @@ -226,55 +136,13 @@ static const struct amdgpu_video_codecs rv_video_codecs_decode = /* Renoir, Arcturus */ static const struct amdgpu_video_codec_info rn_video_codecs_decode_array[] = { - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 3, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 5, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 52, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 4, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 186, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, - .max_width = 4096, - .max_height = 4096, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 0, - }, - { - .codec_type = AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, - .max_width = 8192, - .max_height = 4352, - .max_pixels_per_frame = 4096 * 4096, - .max_level = 0, - }, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2, 4096, 4906, 3)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4, 4096, 4906, 5)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC, 4096, 4906, 52)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1, 4096, 4906, 4)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 8192, 4352, 186)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, 4096, 4096, 0)}, + {codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, 8192, 4352, 0)}, }; static const struct amdgpu_video_codecs rn_video_codecs_decode = -- cgit v1.2.3-58-ga151 From 4fff6fbca12524358a32e56f125ae738141f62b4 Mon Sep 17 00:00:00 2001 From: Xiaojian Du Date: Wed, 14 Jul 2021 15:07:22 +0800 Subject: drm/amdgpu: update the golden setting for vangogh This patch is to update the golden setting for vangogh. Signed-off-by: Xiaojian Du Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index f5e9c022960b..a86a0b347e73 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -3379,6 +3379,7 @@ static const struct soc15_reg_golden golden_settings_gc_10_3_vangogh[] = SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_ENHANCE_2, 0xffffffbf, 0x00000020), SOC15_REG_GOLDEN_VALUE(GC, 0, mmSPI_CONFIG_CNTL_1_Vangogh, 0xffffffff, 0x00070103), SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQG_CONFIG, 0x000017ff, 0x00001000), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmSX_DEBUG_1, 0x00010000, 0x00010020), SOC15_REG_GOLDEN_VALUE(GC, 0, mmTA_CNTL_AUX, 0xfff7ffff, 0x01030000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0xffffffff, 0x00400000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmVGT_GS_MAX_WAVE_ID, 0x00000fff, 0x000000ff), -- cgit v1.2.3-58-ga151 From 3e94b5965e624f7e6d8dd18eb8f3bf2bb99ba30d Mon Sep 17 00:00:00 2001 From: Likun Gao Date: Thu, 15 Jul 2021 11:08:48 +0800 Subject: drm/amdgpu: update golden setting for sienna_cichlid Update GFX golden setting for sienna_cichlid. Signed-off-by: Likun Gao Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index a86a0b347e73..f4771f39a280 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -3300,6 +3300,7 @@ static const struct soc15_reg_golden golden_settings_gc_10_3[] = SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_PERFCOUNTER7_SELECT, 0xf0f001ff, 0x00000000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_PERFCOUNTER8_SELECT, 0xf0f001ff, 0x00000000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_PERFCOUNTER9_SELECT, 0xf0f001ff, 0x00000000), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmSX_DEBUG_1, 0x00010000, 0x00010020), SOC15_REG_GOLDEN_VALUE(GC, 0, mmTA_CNTL_AUX, 0xfff7ffff, 0x01030000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0xffbfffff, 0x00a00000) }; -- cgit v1.2.3-58-ga151 From cfe4e8f00f8f19ba305800f64962d1949ab5d4ca Mon Sep 17 00:00:00 2001 From: Tao Zhou Date: Thu, 15 Jul 2021 14:49:08 +0800 Subject: drm/amdgpu: update gc golden setting for dimgrey_cavefish Update gc_10_3_4 golden setting. Signed-off-by: Tao Zhou Reviewed-by: Guchun Chen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index f4771f39a280..a64b2c706090 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -3447,6 +3447,7 @@ static const struct soc15_reg_golden golden_settings_gc_10_3_4[] = SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_PERFCOUNTER7_SELECT, 0xf0f001ff, 0x00000000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_PERFCOUNTER8_SELECT, 0xf0f001ff, 0x00000000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_PERFCOUNTER9_SELECT, 0xf0f001ff, 0x00000000), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmSX_DEBUG_1, 0x00010000, 0x00010020), SOC15_REG_GOLDEN_VALUE(GC, 0, mmTA_CNTL_AUX, 0x01030000, 0x01030000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0x03a00000, 0x00a00000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmLDS_CONFIG, 0x00000020, 0x00000020) -- cgit v1.2.3-58-ga151 From bd89c991c6c26fb215c63bd21b6d56e7a4ba2ef6 Mon Sep 17 00:00:00 2001 From: Tao Zhou Date: Thu, 15 Jul 2021 14:52:37 +0800 Subject: drm/amd/pm: update DRIVER_IF_VERSION for beige_goby Update the version to 0xD for beige_goby. Signed-off-by: Tao Zhou Reviewed-by: Jack Gui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/inc/smu_v11_0.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/inc/smu_v11_0.h b/drivers/gpu/drm/amd/pm/inc/smu_v11_0.h index 1962a5877191..f61b5c914a3d 100644 --- a/drivers/gpu/drm/amd/pm/inc/smu_v11_0.h +++ b/drivers/gpu/drm/amd/pm/inc/smu_v11_0.h @@ -34,7 +34,7 @@ #define SMU11_DRIVER_IF_VERSION_Navy_Flounder 0xE #define SMU11_DRIVER_IF_VERSION_VANGOGH 0x03 #define SMU11_DRIVER_IF_VERSION_Dimgrey_Cavefish 0xF -#define SMU11_DRIVER_IF_VERSION_Beige_Goby 0x9 +#define SMU11_DRIVER_IF_VERSION_Beige_Goby 0xD /* MP Apertures */ #define MP0_Public 0x03800000 -- cgit v1.2.3-58-ga151 From 353ca0fa56307bfc821a6fb444099e71899f199d Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Wed, 14 Jul 2021 09:06:52 +0100 Subject: drm/amd/display: Fix 10bit 4K display on CIK GPUs Commit 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.") doesn't seems to have fixed 10bit 4K rendering over DisplayPort for CIK GPUs. On my machine with a HAWAII GPU I get a broken image that looks like it has an effective resolution of 1920x1080 but scaled up in an irregular way. Reverting the commit or applying this patch fixes the problem on v5.14-rc1. Fixes: 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.") Acked-by: Mario Kleiner Reviewed-by: Harry Wentland Signed-off-by: Liviu Dudau Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index a6a67244a322..1596f6b7fed7 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -1062,7 +1062,7 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx) * so use only 30 bpp on DCE_VERSION_11_0. Testing with DCE 11.2 and 8.3 * did not show such problems, so this seems to be the exception. */ - if (plane_state->ctx->dce_version != DCE_VERSION_11_0) + if (plane_state->ctx->dce_version > DCE_VERSION_11_0) pipe_ctx->plane_res.scl_data.lb_params.depth = LB_PIXEL_DEPTH_36BPP; else pipe_ctx->plane_res.scl_data.lb_params.depth = LB_PIXEL_DEPTH_30BPP; -- cgit v1.2.3-58-ga151 From 11d8d98cbeef1496469b268d79938b05524731e8 Mon Sep 17 00:00:00 2001 From: Eric Woudstra Date: Fri, 16 Jul 2021 17:36:39 +0200 Subject: mt7530 fix mt7530_fdb_write vid missing ivl bit According to reference guides mt7530 (mt7620) and mt7531: NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0] will be used to read/write the address table. Since the function only fills in CVID and no FID, we need to set the IVL bit. The existing code does not set it. This is a fix for the issue I dropped here earlier: http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html With this patch, it is now possible to delete the 'self' fdb entry manually. However, wifi roaming still has the same issue, the entry does not get deleted automatically. Wifi roaming also needs a fix somewhere else to function correctly in combination with vlan. Signed-off-by: Eric Woudstra Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 1 + drivers/net/dsa/mt7530.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 93136f7e69f5..9e4df35f92cc 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -366,6 +366,7 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, int i; reg[1] |= vid & CVID_MASK; + reg[1] |= ATA2_IVL; reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER; reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP; /* STATIC_ENT indicate that entry is static wouldn't diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 334d610a503d..b19b389ff10a 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -79,6 +79,7 @@ enum mt753x_bpdu_port_fw { #define STATIC_EMP 0 #define STATIC_ENT 3 #define MT7530_ATA2 0x78 +#define ATA2_IVL BIT(15) /* Register for address table write data */ #define MT7530_ATWD 0x7c -- cgit v1.2.3-58-ga151 From 5b69874f74cc5707edd95fcdaa757c507ac8af0f Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Fri, 16 Jul 2021 16:09:41 -0700 Subject: bonding: fix build issue The commit 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") is causing following build error when XFRM is not selected in kernel config. lld: error: undefined symbol: xfrm_dev_state_flush >>> referenced by bond_main.c:3453 (drivers/net/bonding/bond_main.c:3453) >>> net/bonding/bond_main.o:(bond_netdev_event) in archive drivers/built-in.a Fixes: 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Mahesh Bandewar CC: Taehee Yoo CC: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d22d78303311..31730efa7538 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3450,7 +3450,9 @@ static int bond_master_netdev_event(unsigned long event, return bond_event_changename(event_bond); case NETDEV_UNREGISTER: bond_remove_proc_entry(event_bond); +#ifdef CONFIG_XFRM_OFFLOAD xfrm_dev_state_flush(dev_net(bond_dev), bond_dev, true); +#endif /* CONFIG_XFRM_OFFLOAD */ break; case NETDEV_REGISTER: bond_create_proc_entry(event_bond); -- cgit v1.2.3-58-ga151 From e746f3451ec7f91dcc9fd67a631239c715850a34 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 30 Jun 2021 19:25:59 -0500 Subject: scsi: iscsi: Fix iface sysfs attr detection A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when iscsi_iface_attr_is_visible tries to figure out the type by just checking the value, we can collide and return the wrong type. When we call into the driver we might not match and return that we don't want attr visible in sysfs. The patch fixes this by setting the type when we figure out what the param is. Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings") Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 90 ++++++++++++++----------------------- 1 file changed, 34 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index b07105ae7c91..d8b05d8b5470 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -439,39 +439,10 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, struct device *dev = container_of(kobj, struct device, kobj); struct iscsi_iface *iface = iscsi_dev_to_iface(dev); struct iscsi_transport *t = iface->transport; - int param; - int param_type; + int param = -1; if (attr == &dev_attr_iface_enabled.attr) param = ISCSI_NET_PARAM_IFACE_ENABLE; - else if (attr == &dev_attr_iface_vlan_id.attr) - param = ISCSI_NET_PARAM_VLAN_ID; - else if (attr == &dev_attr_iface_vlan_priority.attr) - param = ISCSI_NET_PARAM_VLAN_PRIORITY; - else if (attr == &dev_attr_iface_vlan_enabled.attr) - param = ISCSI_NET_PARAM_VLAN_ENABLED; - else if (attr == &dev_attr_iface_mtu.attr) - param = ISCSI_NET_PARAM_MTU; - else if (attr == &dev_attr_iface_port.attr) - param = ISCSI_NET_PARAM_PORT; - else if (attr == &dev_attr_iface_ipaddress_state.attr) - param = ISCSI_NET_PARAM_IPADDR_STATE; - else if (attr == &dev_attr_iface_delayed_ack_en.attr) - param = ISCSI_NET_PARAM_DELAYED_ACK_EN; - else if (attr == &dev_attr_iface_tcp_nagle_disable.attr) - param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE; - else if (attr == &dev_attr_iface_tcp_wsf_disable.attr) - param = ISCSI_NET_PARAM_TCP_WSF_DISABLE; - else if (attr == &dev_attr_iface_tcp_wsf.attr) - param = ISCSI_NET_PARAM_TCP_WSF; - else if (attr == &dev_attr_iface_tcp_timer_scale.attr) - param = ISCSI_NET_PARAM_TCP_TIMER_SCALE; - else if (attr == &dev_attr_iface_tcp_timestamp_en.attr) - param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN; - else if (attr == &dev_attr_iface_cache_id.attr) - param = ISCSI_NET_PARAM_CACHE_ID; - else if (attr == &dev_attr_iface_redirect_en.attr) - param = ISCSI_NET_PARAM_REDIRECT_EN; else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr) param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO; else if (attr == &dev_attr_iface_header_digest.attr) @@ -508,6 +479,38 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, param = ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN; else if (attr == &dev_attr_iface_initiator_name.attr) param = ISCSI_IFACE_PARAM_INITIATOR_NAME; + + if (param != -1) + return t->attr_is_visible(ISCSI_IFACE_PARAM, param); + + if (attr == &dev_attr_iface_vlan_id.attr) + param = ISCSI_NET_PARAM_VLAN_ID; + else if (attr == &dev_attr_iface_vlan_priority.attr) + param = ISCSI_NET_PARAM_VLAN_PRIORITY; + else if (attr == &dev_attr_iface_vlan_enabled.attr) + param = ISCSI_NET_PARAM_VLAN_ENABLED; + else if (attr == &dev_attr_iface_mtu.attr) + param = ISCSI_NET_PARAM_MTU; + else if (attr == &dev_attr_iface_port.attr) + param = ISCSI_NET_PARAM_PORT; + else if (attr == &dev_attr_iface_ipaddress_state.attr) + param = ISCSI_NET_PARAM_IPADDR_STATE; + else if (attr == &dev_attr_iface_delayed_ack_en.attr) + param = ISCSI_NET_PARAM_DELAYED_ACK_EN; + else if (attr == &dev_attr_iface_tcp_nagle_disable.attr) + param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE; + else if (attr == &dev_attr_iface_tcp_wsf_disable.attr) + param = ISCSI_NET_PARAM_TCP_WSF_DISABLE; + else if (attr == &dev_attr_iface_tcp_wsf.attr) + param = ISCSI_NET_PARAM_TCP_WSF; + else if (attr == &dev_attr_iface_tcp_timer_scale.attr) + param = ISCSI_NET_PARAM_TCP_TIMER_SCALE; + else if (attr == &dev_attr_iface_tcp_timestamp_en.attr) + param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN; + else if (attr == &dev_attr_iface_cache_id.attr) + param = ISCSI_NET_PARAM_CACHE_ID; + else if (attr == &dev_attr_iface_redirect_en.attr) + param = ISCSI_NET_PARAM_REDIRECT_EN; else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) { if (attr == &dev_attr_ipv4_iface_ipaddress.attr) param = ISCSI_NET_PARAM_IPV4_ADDR; @@ -598,32 +601,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, return 0; } - switch (param) { - case ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO: - case ISCSI_IFACE_PARAM_HDRDGST_EN: - case ISCSI_IFACE_PARAM_DATADGST_EN: - case ISCSI_IFACE_PARAM_IMM_DATA_EN: - case ISCSI_IFACE_PARAM_INITIAL_R2T_EN: - case ISCSI_IFACE_PARAM_DATASEQ_INORDER_EN: - case ISCSI_IFACE_PARAM_PDU_INORDER_EN: - case ISCSI_IFACE_PARAM_ERL: - case ISCSI_IFACE_PARAM_MAX_RECV_DLENGTH: - case ISCSI_IFACE_PARAM_FIRST_BURST: - case ISCSI_IFACE_PARAM_MAX_R2T: - case ISCSI_IFACE_PARAM_MAX_BURST: - case ISCSI_IFACE_PARAM_CHAP_AUTH_EN: - case ISCSI_IFACE_PARAM_BIDI_CHAP_EN: - case ISCSI_IFACE_PARAM_DISCOVERY_AUTH_OPTIONAL: - case ISCSI_IFACE_PARAM_DISCOVERY_LOGOUT_EN: - case ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN: - case ISCSI_IFACE_PARAM_INITIATOR_NAME: - param_type = ISCSI_IFACE_PARAM; - break; - default: - param_type = ISCSI_NET_PARAM; - } - - return t->attr_is_visible(param_type, param); + return t->attr_is_visible(ISCSI_NET_PARAM, param); } static struct attribute *iscsi_iface_attrs[] = { -- cgit v1.2.3-58-ga151 From 6d8e7e7c932162bccd06872362751b0e1d76f5af Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 2 Jul 2021 12:16:55 +0300 Subject: scsi: target: Fix protect handling in WRITE SAME(32) WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st byte instead of 10th byte. Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME") Signed-off-by: Dmitry Bogdanov Signed-off-by: Martin K. Petersen --- drivers/target/target_core_sbc.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index b32f4ee88e79..ca1b2312d6e7 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -25,7 +25,7 @@ #include "target_core_alua.h" static sense_reason_t -sbc_check_prot(struct se_device *, struct se_cmd *, unsigned char *, u32, bool); +sbc_check_prot(struct se_device *, struct se_cmd *, unsigned char, u32, bool); static sense_reason_t sbc_execute_unmap(struct se_cmd *cmd); static sense_reason_t @@ -279,14 +279,14 @@ static inline unsigned long long transport_lba_64_ext(unsigned char *cdb) } static sense_reason_t -sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *ops) +sbc_setup_write_same(struct se_cmd *cmd, unsigned char flags, struct sbc_ops *ops) { struct se_device *dev = cmd->se_dev; sector_t end_lba = dev->transport->get_blocks(dev) + 1; unsigned int sectors = sbc_get_write_same_sectors(cmd); sense_reason_t ret; - if ((flags[0] & 0x04) || (flags[0] & 0x02)) { + if ((flags & 0x04) || (flags & 0x02)) { pr_err("WRITE_SAME PBDATA and LBDATA" " bits not supported for Block Discard" " Emulation\n"); @@ -308,7 +308,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o } /* We always have ANC_SUP == 0 so setting ANCHOR is always an error */ - if (flags[0] & 0x10) { + if (flags & 0x10) { pr_warn("WRITE SAME with ANCHOR not supported\n"); return TCM_INVALID_CDB_FIELD; } @@ -316,7 +316,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o * Special case for WRITE_SAME w/ UNMAP=1 that ends up getting * translated into block discard requests within backend code. */ - if (flags[0] & 0x08) { + if (flags & 0x08) { if (!ops->execute_unmap) return TCM_UNSUPPORTED_SCSI_OPCODE; @@ -331,7 +331,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o if (!ops->execute_write_same) return TCM_UNSUPPORTED_SCSI_OPCODE; - ret = sbc_check_prot(dev, cmd, &cmd->t_task_cdb[0], sectors, true); + ret = sbc_check_prot(dev, cmd, flags >> 5, sectors, true); if (ret) return ret; @@ -717,10 +717,9 @@ sbc_set_prot_op_checks(u8 protect, bool fabric_prot, enum target_prot_type prot_ } static sense_reason_t -sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb, +sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char protect, u32 sectors, bool is_write) { - u8 protect = cdb[1] >> 5; int sp_ops = cmd->se_sess->sup_prot_ops; int pi_prot_type = dev->dev_attrib.pi_prot_type; bool fabric_prot = false; @@ -768,7 +767,7 @@ sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb, fallthrough; default: pr_err("Unable to determine pi_prot_type for CDB: 0x%02x " - "PROTECT: 0x%02x\n", cdb[0], protect); + "PROTECT: 0x%02x\n", cmd->t_task_cdb[0], protect); return TCM_INVALID_CDB_FIELD; } @@ -843,7 +842,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) if (sbc_check_dpofua(dev, cmd, cdb)) return TCM_INVALID_CDB_FIELD; - ret = sbc_check_prot(dev, cmd, cdb, sectors, false); + ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false); if (ret) return ret; @@ -857,7 +856,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) if (sbc_check_dpofua(dev, cmd, cdb)) return TCM_INVALID_CDB_FIELD; - ret = sbc_check_prot(dev, cmd, cdb, sectors, false); + ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false); if (ret) return ret; @@ -871,7 +870,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) if (sbc_check_dpofua(dev, cmd, cdb)) return TCM_INVALID_CDB_FIELD; - ret = sbc_check_prot(dev, cmd, cdb, sectors, false); + ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false); if (ret) return ret; @@ -892,7 +891,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) if (sbc_check_dpofua(dev, cmd, cdb)) return TCM_INVALID_CDB_FIELD; - ret = sbc_check_prot(dev, cmd, cdb, sectors, true); + ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true); if (ret) return ret; @@ -906,7 +905,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) if (sbc_check_dpofua(dev, cmd, cdb)) return TCM_INVALID_CDB_FIELD; - ret = sbc_check_prot(dev, cmd, cdb, sectors, true); + ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true); if (ret) return ret; @@ -921,7 +920,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) if (sbc_check_dpofua(dev, cmd, cdb)) return TCM_INVALID_CDB_FIELD; - ret = sbc_check_prot(dev, cmd, cdb, sectors, true); + ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true); if (ret) return ret; @@ -980,7 +979,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) size = sbc_get_size(cmd, 1); cmd->t_task_lba = get_unaligned_be64(&cdb[12]); - ret = sbc_setup_write_same(cmd, &cdb[10], ops); + ret = sbc_setup_write_same(cmd, cdb[10], ops); if (ret) return ret; break; @@ -1079,7 +1078,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) size = sbc_get_size(cmd, 1); cmd->t_task_lba = get_unaligned_be64(&cdb[2]); - ret = sbc_setup_write_same(cmd, &cdb[1], ops); + ret = sbc_setup_write_same(cmd, cdb[1], ops); if (ret) return ret; break; @@ -1097,7 +1096,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) * Follow sbcr26 with WRITE_SAME (10) and check for the existence * of byte 1 bit 3 UNMAP instead of original reserved field */ - ret = sbc_setup_write_same(cmd, &cdb[1], ops); + ret = sbc_setup_write_same(cmd, cdb[1], ops); if (ret) return ret; break; -- cgit v1.2.3-58-ga151 From 7c9ff3deeee61b253715dcf968a6307af148c9b2 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 16 Jul 2021 11:21:13 -0700 Subject: Drivers: hv: vmbus: Fix duplicate CPU assignments within a device The vmbus module uses a rotational algorithm to assign target CPUs to a device's channels. Depending on the timing of different device's channel offers, different channels of a device may be assigned to the same CPU. For example on a VM with 2 CPUs, if NIC A and B's channels are offered in the following order, NIC A will have both channels on CPU0, and NIC B will have both channels on CPU1 -- see below. This kind of assignment causes RSS load that is spreading across different channels to end up on the same CPU. Timing of channel offers: NIC A channel 0 NIC B channel 0 NIC A channel 1 NIC B channel 1 VMBUS ID 14: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter Device_ID = {cab064cd-1f31-47d5-a8b4-9d57e320cccd} Sysfs path: /sys/bus/vmbus/devices/cab064cd-1f31-47d5-a8b4-9d57e320cccd Rel_ID=14, target_cpu=0 Rel_ID=17, target_cpu=0 VMBUS ID 16: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter Device_ID = {244225ca-743e-4020-a17d-d7baa13d6cea} Sysfs path: /sys/bus/vmbus/devices/244225ca-743e-4020-a17d-d7baa13d6cea Rel_ID=16, target_cpu=1 Rel_ID=18, target_cpu=1 Update the vmbus CPU assignment algorithm to avoid duplicate CPU assignments within a device. The new algorithm iterates num_online_cpus + 1 times. The existing rotational algorithm to find "next NUMA & CPU" is still here. But if the resulting CPU is already used by the same device, it will try the next CPU. In the last iteration, it assigns the channel to the next available CPU like the existing algorithm. This is not normally expected, because during device probe, we limit the number of channels of a device to be <= number of online CPUs. Signed-off-by: Haiyang Zhang Reviewed-by: Michael Kelley Tested-by: Michael Kelley Link: https://lore.kernel.org/r/1626459673-17420-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Wei Liu --- drivers/hv/channel_mgmt.c | 96 +++++++++++++++++++++++++++++++---------------- 1 file changed, 64 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index caf6d0c4bc1b..142308526ec6 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -605,6 +605,17 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel) */ mutex_lock(&vmbus_connection.channel_mutex); + list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) { + if (guid_equal(&channel->offermsg.offer.if_type, + &newchannel->offermsg.offer.if_type) && + guid_equal(&channel->offermsg.offer.if_instance, + &newchannel->offermsg.offer.if_instance)) { + fnew = false; + newchannel->primary_channel = channel; + break; + } + } + init_vp_index(newchannel); /* Remember the channels that should be cleaned up upon suspend. */ @@ -617,16 +628,6 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel) */ atomic_dec(&vmbus_connection.offer_in_progress); - list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) { - if (guid_equal(&channel->offermsg.offer.if_type, - &newchannel->offermsg.offer.if_type) && - guid_equal(&channel->offermsg.offer.if_instance, - &newchannel->offermsg.offer.if_instance)) { - fnew = false; - break; - } - } - if (fnew) { list_add_tail(&newchannel->listentry, &vmbus_connection.chn_list); @@ -647,7 +648,6 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel) /* * Process the sub-channel. */ - newchannel->primary_channel = channel; list_add_tail(&newchannel->sc_list, &channel->sc_list); } @@ -683,6 +683,30 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel) queue_work(wq, &newchannel->add_channel_work); } +/* + * Check if CPUs used by other channels of the same device. + * It should only be called by init_vp_index(). + */ +static bool hv_cpuself_used(u32 cpu, struct vmbus_channel *chn) +{ + struct vmbus_channel *primary = chn->primary_channel; + struct vmbus_channel *sc; + + lockdep_assert_held(&vmbus_connection.channel_mutex); + + if (!primary) + return false; + + if (primary->target_cpu == cpu) + return true; + + list_for_each_entry(sc, &primary->sc_list, sc_list) + if (sc != chn && sc->target_cpu == cpu) + return true; + + return false; +} + /* * We use this state to statically distribute the channel interrupt load. */ @@ -702,6 +726,7 @@ static int next_numa_node_id; static void init_vp_index(struct vmbus_channel *channel) { bool perf_chn = hv_is_perf_channel(channel); + u32 i, ncpu = num_online_cpus(); cpumask_var_t available_mask; struct cpumask *alloced_mask; u32 target_cpu; @@ -724,31 +749,38 @@ static void init_vp_index(struct vmbus_channel *channel) return; } - while (true) { - numa_node = next_numa_node_id++; - if (numa_node == nr_node_ids) { - next_numa_node_id = 0; - continue; + for (i = 1; i <= ncpu + 1; i++) { + while (true) { + numa_node = next_numa_node_id++; + if (numa_node == nr_node_ids) { + next_numa_node_id = 0; + continue; + } + if (cpumask_empty(cpumask_of_node(numa_node))) + continue; + break; + } + alloced_mask = &hv_context.hv_numa_map[numa_node]; + + if (cpumask_weight(alloced_mask) == + cpumask_weight(cpumask_of_node(numa_node))) { + /* + * We have cycled through all the CPUs in the node; + * reset the alloced map. + */ + cpumask_clear(alloced_mask); } - if (cpumask_empty(cpumask_of_node(numa_node))) - continue; - break; - } - alloced_mask = &hv_context.hv_numa_map[numa_node]; - if (cpumask_weight(alloced_mask) == - cpumask_weight(cpumask_of_node(numa_node))) { - /* - * We have cycled through all the CPUs in the node; - * reset the alloced map. - */ - cpumask_clear(alloced_mask); - } + cpumask_xor(available_mask, alloced_mask, + cpumask_of_node(numa_node)); - cpumask_xor(available_mask, alloced_mask, cpumask_of_node(numa_node)); + target_cpu = cpumask_first(available_mask); + cpumask_set_cpu(target_cpu, alloced_mask); - target_cpu = cpumask_first(available_mask); - cpumask_set_cpu(target_cpu, alloced_mask); + if (channel->offermsg.offer.sub_channel_index >= ncpu || + i > ncpu || !hv_cpuself_used(target_cpu, channel)) + break; + } channel->target_cpu = target_cpu; -- cgit v1.2.3-58-ga151 From 56912da7a68c8356df6a6740476237441b0b792a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 16 Jul 2021 20:21:33 +0200 Subject: spi: cadence: Correct initialisation of runtime PM again The original implementation of RPM handling in probe() was mostly correct, except it failed to call pm_runtime_get_*() to activate the hardware. The subsequent fix, 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM"), breaks the implementation further, to the point where the system using this hard IP on ZynqMP hangs on boot, because it accesses hardware which is gated off. Undo 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM") and instead add missing pm_runtime_get_noresume() and move the RPM disabling all the way to the end of probe(). That makes ZynqMP not hang on boot yet again. Fixes: 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM") Signed-off-by: Marek Vasut Cc: Charles Keepax Cc: Mark Brown Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de Signed-off-by: Mark Brown --- drivers/spi/spi-cadence.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index a3afd1b9ac56..ceb16e70d235 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -517,6 +517,12 @@ static int cdns_spi_probe(struct platform_device *pdev) goto clk_dis_apb; } + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); if (ret < 0) master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS; @@ -531,11 +537,6 @@ static int cdns_spi_probe(struct platform_device *pdev) /* SPI controller initializations */ cdns_spi_init_hw(xspi); - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); - pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); - irq = platform_get_irq(pdev, 0); if (irq <= 0) { ret = -ENXIO; @@ -566,6 +567,9 @@ static int cdns_spi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_MASK(8); + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + ret = spi_register_master(master); if (ret) { dev_err(&pdev->dev, "spi_register_master failed\n"); -- cgit v1.2.3-58-ga151 From c9d9fdbc108af8915d3f497bbdf3898bf8f321b8 Mon Sep 17 00:00:00 2001 From: Jason Ekstrand Date: Wed, 14 Jul 2021 14:34:15 -0500 Subject: drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser" This reverts 686c7c35abc2 ("drm/i915/gem: Asynchronous cmdparser"). The justification for this commit in the git history was a vague comment about getting it out from under the struct_mutex. While this may improve perf for some workloads on Gen7 platforms where we rely on the command parser for features such as indirect rendering, no numbers were provided to prove such an improvement. It claims to closed two gitlab/bugzilla issues but with no explanation whatsoever as to why or what bug it's fixing. Meanwhile, by moving command parsing off to an async callback, it leaves us with a problem of what to do on error. When things were synchronous, EXECBUFFER2 would fail with an error code if parsing failed. When moving it to async, we needed another way to handle that error and the solution employed was to set an error on the dma_fence and then trust that said error gets propagated to the client eventually. Moving back to synchronous will help us untangle the fence error propagation mess. This also reverts most of 0edbb9ba1bfe ("drm/i915: Move cmd parser pinning to execbuffer") which is a refactor of some of our allocation paths for asynchronous parsing. Now that everything is synchronous, we don't need it. v2 (Daniel Vetter): - Add stabel Cc and Fixes tag Signed-off-by: Jason Ekstrand Cc: # v5.6+ Fixes: 9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences") Cc: Maarten Lankhorst Reviewed-by: Jon Bloomfield Acked-by: Daniel Vetter Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-2-jason@jlekstrand.net (cherry picked from commit 93b713304188844b8514074dc13ffd56d12235d3) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c | 227 ++------------------- .../drm/i915/gem/selftests/i915_gem_execbuffer.c | 4 + drivers/gpu/drm/i915/i915_cmd_parser.c | 132 ++++++------ drivers/gpu/drm/i915/i915_drv.h | 7 +- 4 files changed, 91 insertions(+), 279 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c index a8abc9af5ff4..4a6419d7be93 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c @@ -25,10 +25,8 @@ #include "i915_gem_clflush.h" #include "i915_gem_context.h" #include "i915_gem_ioctls.h" -#include "i915_sw_fence_work.h" #include "i915_trace.h" #include "i915_user_extensions.h" -#include "i915_memcpy.h" struct eb_vma { struct i915_vma *vma; @@ -1456,6 +1454,10 @@ static u32 *reloc_gpu(struct i915_execbuffer *eb, int err; struct intel_engine_cs *engine = eb->engine; + /* If we need to copy for the cmdparser, we will stall anyway */ + if (eb_use_cmdparser(eb)) + return ERR_PTR(-EWOULDBLOCK); + if (!reloc_can_use_engine(engine)) { engine = engine->gt->engine_class[COPY_ENGINE_CLASS][0]; if (!engine) @@ -2372,217 +2374,6 @@ shadow_batch_pin(struct i915_execbuffer *eb, return vma; } -struct eb_parse_work { - struct dma_fence_work base; - struct intel_engine_cs *engine; - struct i915_vma *batch; - struct i915_vma *shadow; - struct i915_vma *trampoline; - unsigned long batch_offset; - unsigned long batch_length; - unsigned long *jump_whitelist; - const void *batch_map; - void *shadow_map; -}; - -static int __eb_parse(struct dma_fence_work *work) -{ - struct eb_parse_work *pw = container_of(work, typeof(*pw), base); - int ret; - bool cookie; - - cookie = dma_fence_begin_signalling(); - ret = intel_engine_cmd_parser(pw->engine, - pw->batch, - pw->batch_offset, - pw->batch_length, - pw->shadow, - pw->jump_whitelist, - pw->shadow_map, - pw->batch_map); - dma_fence_end_signalling(cookie); - - return ret; -} - -static void __eb_parse_release(struct dma_fence_work *work) -{ - struct eb_parse_work *pw = container_of(work, typeof(*pw), base); - - if (!IS_ERR_OR_NULL(pw->jump_whitelist)) - kfree(pw->jump_whitelist); - - if (pw->batch_map) - i915_gem_object_unpin_map(pw->batch->obj); - else - i915_gem_object_unpin_pages(pw->batch->obj); - - i915_gem_object_unpin_map(pw->shadow->obj); - - if (pw->trampoline) - i915_active_release(&pw->trampoline->active); - i915_active_release(&pw->shadow->active); - i915_active_release(&pw->batch->active); -} - -static const struct dma_fence_work_ops eb_parse_ops = { - .name = "eb_parse", - .work = __eb_parse, - .release = __eb_parse_release, -}; - -static inline int -__parser_mark_active(struct i915_vma *vma, - struct intel_timeline *tl, - struct dma_fence *fence) -{ - struct intel_gt_buffer_pool_node *node = vma->private; - - return i915_active_ref(&node->active, tl->fence_context, fence); -} - -static int -parser_mark_active(struct eb_parse_work *pw, struct intel_timeline *tl) -{ - int err; - - mutex_lock(&tl->mutex); - - err = __parser_mark_active(pw->shadow, tl, &pw->base.dma); - if (err) - goto unlock; - - if (pw->trampoline) { - err = __parser_mark_active(pw->trampoline, tl, &pw->base.dma); - if (err) - goto unlock; - } - -unlock: - mutex_unlock(&tl->mutex); - return err; -} - -static int eb_parse_pipeline(struct i915_execbuffer *eb, - struct i915_vma *shadow, - struct i915_vma *trampoline) -{ - struct eb_parse_work *pw; - struct drm_i915_gem_object *batch = eb->batch->vma->obj; - bool needs_clflush; - int err; - - GEM_BUG_ON(overflows_type(eb->batch_start_offset, pw->batch_offset)); - GEM_BUG_ON(overflows_type(eb->batch_len, pw->batch_length)); - - pw = kzalloc(sizeof(*pw), GFP_KERNEL); - if (!pw) - return -ENOMEM; - - err = i915_active_acquire(&eb->batch->vma->active); - if (err) - goto err_free; - - err = i915_active_acquire(&shadow->active); - if (err) - goto err_batch; - - if (trampoline) { - err = i915_active_acquire(&trampoline->active); - if (err) - goto err_shadow; - } - - pw->shadow_map = i915_gem_object_pin_map(shadow->obj, I915_MAP_WB); - if (IS_ERR(pw->shadow_map)) { - err = PTR_ERR(pw->shadow_map); - goto err_trampoline; - } - - needs_clflush = - !(batch->cache_coherent & I915_BO_CACHE_COHERENT_FOR_READ); - - pw->batch_map = ERR_PTR(-ENODEV); - if (needs_clflush && i915_has_memcpy_from_wc()) - pw->batch_map = i915_gem_object_pin_map(batch, I915_MAP_WC); - - if (IS_ERR(pw->batch_map)) { - err = i915_gem_object_pin_pages(batch); - if (err) - goto err_unmap_shadow; - pw->batch_map = NULL; - } - - pw->jump_whitelist = - intel_engine_cmd_parser_alloc_jump_whitelist(eb->batch_len, - trampoline); - if (IS_ERR(pw->jump_whitelist)) { - err = PTR_ERR(pw->jump_whitelist); - goto err_unmap_batch; - } - - dma_fence_work_init(&pw->base, &eb_parse_ops); - - pw->engine = eb->engine; - pw->batch = eb->batch->vma; - pw->batch_offset = eb->batch_start_offset; - pw->batch_length = eb->batch_len; - pw->shadow = shadow; - pw->trampoline = trampoline; - - /* Mark active refs early for this worker, in case we get interrupted */ - err = parser_mark_active(pw, eb->context->timeline); - if (err) - goto err_commit; - - err = dma_resv_reserve_shared(pw->batch->resv, 1); - if (err) - goto err_commit; - - err = dma_resv_reserve_shared(shadow->resv, 1); - if (err) - goto err_commit; - - /* Wait for all writes (and relocs) into the batch to complete */ - err = i915_sw_fence_await_reservation(&pw->base.chain, - pw->batch->resv, NULL, false, - 0, I915_FENCE_GFP); - if (err < 0) - goto err_commit; - - /* Keep the batch alive and unwritten as we parse */ - dma_resv_add_shared_fence(pw->batch->resv, &pw->base.dma); - - /* Force execution to wait for completion of the parser */ - dma_resv_add_excl_fence(shadow->resv, &pw->base.dma); - - dma_fence_work_commit_imm(&pw->base); - return 0; - -err_commit: - i915_sw_fence_set_error_once(&pw->base.chain, err); - dma_fence_work_commit_imm(&pw->base); - return err; - -err_unmap_batch: - if (pw->batch_map) - i915_gem_object_unpin_map(batch); - else - i915_gem_object_unpin_pages(batch); -err_unmap_shadow: - i915_gem_object_unpin_map(shadow->obj); -err_trampoline: - if (trampoline) - i915_active_release(&trampoline->active); -err_shadow: - i915_active_release(&shadow->active); -err_batch: - i915_active_release(&eb->batch->vma->active); -err_free: - kfree(pw); - return err; -} - static struct i915_vma *eb_dispatch_secure(struct i915_execbuffer *eb, struct i915_vma *vma) { /* @@ -2672,7 +2463,15 @@ static int eb_parse(struct i915_execbuffer *eb) goto err_trampoline; } - err = eb_parse_pipeline(eb, shadow, trampoline); + err = dma_resv_reserve_shared(shadow->resv, 1); + if (err) + goto err_trampoline; + + err = intel_engine_cmd_parser(eb->engine, + eb->batch->vma, + eb->batch_start_offset, + eb->batch_len, + shadow, trampoline); if (err) goto err_unpin_batch; diff --git a/drivers/gpu/drm/i915/gem/selftests/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/selftests/i915_gem_execbuffer.c index 4df505e4c53a..16162fc2782d 100644 --- a/drivers/gpu/drm/i915/gem/selftests/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/gem/selftests/i915_gem_execbuffer.c @@ -125,6 +125,10 @@ static int igt_gpu_reloc(void *arg) intel_gt_pm_get(&eb.i915->gt); for_each_uabi_engine(eb.engine, eb.i915) { + if (intel_engine_requires_cmd_parser(eb.engine) || + intel_engine_using_cmd_parser(eb.engine)) + continue; + reloc_cache_init(&eb.reloc_cache, eb.i915); memset(map, POISON_INUSE, 4096); diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 3992c25a191d..00ec618d0159 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -1145,19 +1145,41 @@ find_reg(const struct intel_engine_cs *engine, u32 addr) static u32 *copy_batch(struct drm_i915_gem_object *dst_obj, struct drm_i915_gem_object *src_obj, unsigned long offset, unsigned long length, - void *dst, const void *src) + bool *needs_clflush_after) { - bool needs_clflush = - !(src_obj->cache_coherent & I915_BO_CACHE_COHERENT_FOR_READ); - - if (src) { - GEM_BUG_ON(!needs_clflush); - i915_unaligned_memcpy_from_wc(dst, src + offset, length); - } else { - struct scatterlist *sg; + unsigned int src_needs_clflush; + unsigned int dst_needs_clflush; + void *dst, *src; + int ret; + + ret = i915_gem_object_prepare_write(dst_obj, &dst_needs_clflush); + if (ret) + return ERR_PTR(ret); + + dst = i915_gem_object_pin_map(dst_obj, I915_MAP_WB); + i915_gem_object_finish_access(dst_obj); + if (IS_ERR(dst)) + return dst; + + ret = i915_gem_object_prepare_read(src_obj, &src_needs_clflush); + if (ret) { + i915_gem_object_unpin_map(dst_obj); + return ERR_PTR(ret); + } + + src = ERR_PTR(-ENODEV); + if (src_needs_clflush && i915_has_memcpy_from_wc()) { + src = i915_gem_object_pin_map(src_obj, I915_MAP_WC); + if (!IS_ERR(src)) { + i915_unaligned_memcpy_from_wc(dst, + src + offset, + length); + i915_gem_object_unpin_map(src_obj); + } + } + if (IS_ERR(src)) { + unsigned long x, n, remain; void *ptr; - unsigned int x, sg_ofs; - unsigned long remain; /* * We can avoid clflushing partial cachelines before the write @@ -1168,40 +1190,34 @@ static u32 *copy_batch(struct drm_i915_gem_object *dst_obj, * validate up to the end of the batch. */ remain = length; - if (!(dst_obj->cache_coherent & I915_BO_CACHE_COHERENT_FOR_READ)) + if (dst_needs_clflush & CLFLUSH_BEFORE) remain = round_up(remain, boot_cpu_data.x86_clflush_size); ptr = dst; x = offset_in_page(offset); - sg = i915_gem_object_get_sg(src_obj, offset >> PAGE_SHIFT, &sg_ofs, false); - - while (remain) { - unsigned long sg_max = sg->length >> PAGE_SHIFT; - - for (; remain && sg_ofs < sg_max; sg_ofs++) { - unsigned long len = min(remain, PAGE_SIZE - x); - void *map; - - map = kmap_atomic(nth_page(sg_page(sg), sg_ofs)); - if (needs_clflush) - drm_clflush_virt_range(map + x, len); - memcpy(ptr, map + x, len); - kunmap_atomic(map); - - ptr += len; - remain -= len; - x = 0; - } - - sg_ofs = 0; - sg = sg_next(sg); + for (n = offset >> PAGE_SHIFT; remain; n++) { + int len = min(remain, PAGE_SIZE - x); + + src = kmap_atomic(i915_gem_object_get_page(src_obj, n)); + if (src_needs_clflush) + drm_clflush_virt_range(src + x, len); + memcpy(ptr, src + x, len); + kunmap_atomic(src); + + ptr += len; + remain -= len; + x = 0; } } + i915_gem_object_finish_access(src_obj); + memset32(dst + length, 0, (dst_obj->base.size - length) / sizeof(u32)); /* dst_obj is returned with vmap pinned */ + *needs_clflush_after = dst_needs_clflush & CLFLUSH_AFTER; + return dst; } @@ -1360,6 +1376,9 @@ static int check_bbstart(u32 *cmd, u32 offset, u32 length, if (target_cmd_index == offset) return 0; + if (IS_ERR(jump_whitelist)) + return PTR_ERR(jump_whitelist); + if (!test_bit(target_cmd_index, jump_whitelist)) { DRM_DEBUG("CMD: BB_START to 0x%llx not a previously executed cmd\n", jump_target); @@ -1369,28 +1388,10 @@ static int check_bbstart(u32 *cmd, u32 offset, u32 length, return 0; } -/** - * intel_engine_cmd_parser_alloc_jump_whitelist() - preallocate jump whitelist for intel_engine_cmd_parser() - * @batch_length: length of the commands in batch_obj - * @trampoline: Whether jump trampolines are used. - * - * Preallocates a jump whitelist for parsing the cmd buffer in intel_engine_cmd_parser(). - * This has to be preallocated, because the command parser runs in signaling context, - * and may not allocate any memory. - * - * Return: NULL or pointer to a jump whitelist, or ERR_PTR() on failure. Use - * IS_ERR() to check for errors. Must bre freed() with kfree(). - * - * NULL is a valid value, meaning no allocation was required. - */ -unsigned long *intel_engine_cmd_parser_alloc_jump_whitelist(u32 batch_length, - bool trampoline) +static unsigned long *alloc_whitelist(u32 batch_length) { unsigned long *jmp; - if (trampoline) - return NULL; - /* * We expect batch_length to be less than 256KiB for known users, * i.e. we need at most an 8KiB bitmap allocation which should be @@ -1425,21 +1426,21 @@ unsigned long *intel_engine_cmd_parser_alloc_jump_whitelist(u32 batch_length, * Return: non-zero if the parser finds violations or otherwise fails; -EACCES * if the batch appears legal but should use hardware parsing */ + int intel_engine_cmd_parser(struct intel_engine_cs *engine, struct i915_vma *batch, unsigned long batch_offset, unsigned long batch_length, struct i915_vma *shadow, - unsigned long *jump_whitelist, - void *shadow_map, - const void *batch_map) + bool trampoline) { u32 *cmd, *batch_end, offset = 0; struct drm_i915_cmd_descriptor default_desc = noop_desc; const struct drm_i915_cmd_descriptor *desc = &default_desc; + bool needs_clflush_after = false; + unsigned long *jump_whitelist; u64 batch_addr, shadow_addr; int ret = 0; - bool trampoline = !jump_whitelist; GEM_BUG_ON(!IS_ALIGNED(batch_offset, sizeof(*cmd))); GEM_BUG_ON(!IS_ALIGNED(batch_length, sizeof(*cmd))); @@ -1447,8 +1448,18 @@ int intel_engine_cmd_parser(struct intel_engine_cs *engine, batch->size)); GEM_BUG_ON(!batch_length); - cmd = copy_batch(shadow->obj, batch->obj, batch_offset, batch_length, - shadow_map, batch_map); + cmd = copy_batch(shadow->obj, batch->obj, + batch_offset, batch_length, + &needs_clflush_after); + if (IS_ERR(cmd)) { + DRM_DEBUG("CMD: Failed to copy batch\n"); + return PTR_ERR(cmd); + } + + jump_whitelist = NULL; + if (!trampoline) + /* Defer failure until attempted use */ + jump_whitelist = alloc_whitelist(batch_length); shadow_addr = gen8_canonical_addr(shadow->node.start); batch_addr = gen8_canonical_addr(batch->node.start + batch_offset); @@ -1549,6 +1560,9 @@ int intel_engine_cmd_parser(struct intel_engine_cs *engine, i915_gem_object_flush_map(shadow->obj); + if (!IS_ERR_OR_NULL(jump_whitelist)) + kfree(jump_whitelist); + i915_gem_object_unpin_map(shadow->obj); return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 38ff2fb89744..b30397b04529 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1906,17 +1906,12 @@ const char *i915_cache_level_str(struct drm_i915_private *i915, int type); int i915_cmd_parser_get_version(struct drm_i915_private *dev_priv); int intel_engine_init_cmd_parser(struct intel_engine_cs *engine); void intel_engine_cleanup_cmd_parser(struct intel_engine_cs *engine); -unsigned long *intel_engine_cmd_parser_alloc_jump_whitelist(u32 batch_length, - bool trampoline); - int intel_engine_cmd_parser(struct intel_engine_cs *engine, struct i915_vma *batch, unsigned long batch_offset, unsigned long batch_length, struct i915_vma *shadow, - unsigned long *jump_whitelist, - void *shadow_map, - const void *batch_map); + bool trampoline); #define I915_CMD_PARSER_TRAMPOLINE_SIZE 8 /* intel_device_info.c */ -- cgit v1.2.3-58-ga151 From 3761baae908a7b5012be08d70fa553cc2eb82305 Mon Sep 17 00:00:00 2001 From: Jason Ekstrand Date: Wed, 14 Jul 2021 14:34:16 -0500 Subject: Revert "drm/i915: Propagate errors on awaiting already signaled fences" This reverts commit 9e31c1fe45d555a948ff66f1f0e3fe1f83ca63f7. Ever since that commit, we've been having issues where a hang in one client can propagate to another. In particular, a hang in an app can propagate to the X server which causes the whole desktop to lock up. Error propagation along fences sound like a good idea, but as your bug shows, surprising consequences, since propagating errors across security boundaries is not a good thing. What we do have is track the hangs on the ctx, and report information to userspace using RESET_STATS. That's how arb_robustness works. Also, if my understanding is still correct, the EIO from execbuf is when your context is banned (because not recoverable or too many hangs). And in all these cases it's up to userspace to figure out what is all impacted and should be reported to the application, that's not on the kernel to guess and automatically propagate. What's more, we're also building more features on top of ctx error reporting with RESET_STATS ioctl: Encrypted buffers use the same, and the userspace fence wait also relies on that mechanism. So it is the path going forward for reporting gpu hangs and resets to userspace. So all together that's why I think we should just bury this idea again as not quite the direction we want to go to, hence why I think the revert is the right option here. For backporters: Please note that you _must_ have a backport of https://lore.kernel.org/dri-devel/20210602164149.391653-2-jason@jlekstrand.net/ for otherwise backporting just this patch opens up a security bug. v2: Augment commit message. Also restore Jason's sob that I accidentally lost. v3: Add a note for backporters Signed-off-by: Jason Ekstrand Reported-by: Marcin Slusarz Cc: # v5.6+ Cc: Jason Ekstrand Cc: Marcin Slusarz Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3080 Fixes: 9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences") Acked-by: Daniel Vetter Reviewed-by: Jon Bloomfield Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-3-jason@jlekstrand.net (cherry picked from commit 93a2711cddd5760e2f0f901817d71c93183c3b87) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_request.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_request.c b/drivers/gpu/drm/i915/i915_request.c index 1014c71cf7f5..37aef1308573 100644 --- a/drivers/gpu/drm/i915/i915_request.c +++ b/drivers/gpu/drm/i915/i915_request.c @@ -1426,10 +1426,8 @@ i915_request_await_execution(struct i915_request *rq, do { fence = *child++; - if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)) { - i915_sw_fence_set_error_once(&rq->submit, fence->error); + if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)) continue; - } if (fence->context == rq->fence.context) continue; @@ -1527,10 +1525,8 @@ i915_request_await_dma_fence(struct i915_request *rq, struct dma_fence *fence) do { fence = *child++; - if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)) { - i915_sw_fence_set_error_once(&rq->submit, fence->error); + if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)) continue; - } /* * Requests on the same timeline are explicitly ordered, along -- cgit v1.2.3-58-ga151 From d2cbbf1fe503c07e466c62f83aa1926d74d15821 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Thu, 15 Jul 2021 11:26:01 +0200 Subject: ACPI: Kconfig: Fix table override from built-in initrd During a rework of initramfs code the INITRAMFS_COMPRESSION config option was removed in commit 65e00e04e5ae. A leftover as a dependency broke the config option ACPI_TABLE_OVERRIDE_VIA_ BUILTIN_INITRD that is used to enable the overriding of ACPI tables from built-in initrd. Fixing the dependency. Fixes: 65e00e04e5ae ("initramfs: refactor the initramfs build rules") Signed-off-by: Robert Richter Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 9d872ea477a6..8f9940f40baa 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -370,7 +370,7 @@ config ACPI_TABLE_UPGRADE config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD bool "Override ACPI tables from built-in initrd" depends on ACPI_TABLE_UPGRADE - depends on INITRAMFS_SOURCE!="" && INITRAMFS_COMPRESSION="" + depends on INITRAMFS_SOURCE!="" && INITRAMFS_COMPRESSION_NONE help This option provides functionality to override arbitrary ACPI tables from built-in uncompressed initrd. -- cgit v1.2.3-58-ga151 From 71f6428332844f38c7cb10461d9f29e9c9b983a0 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 12 Jul 2021 21:21:21 +0300 Subject: ACPI: utils: Fix reference counting in for_each_acpi_dev_match() Currently it's possible to iterate over the dangling pointer in case the device suddenly disappears. This may happen becase callers put it at the end of a loop. Instead, let's move that call inside acpi_dev_get_next_match_dev(). Fixes: 803abec64ef9 ("media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver") Fixes: bf263f64e804 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro") Fixes: edbd1bc4951e ("efi/dev-path-parser: Switch to use for_each_acpi_dev_match()") Signed-off-by: Andy Shevchenko Reviewed-by: Daniel Scally Signed-off-by: Rafael J. Wysocki --- drivers/acpi/utils.c | 7 +++---- drivers/firmware/efi/dev-path-parser.c | 1 - drivers/media/pci/intel/ipu3/cio2-bridge.c | 6 ++---- include/acpi/acpi_bus.h | 5 ----- 4 files changed, 5 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index e7ddd281afff..d5cedffeeff9 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -860,11 +860,9 @@ EXPORT_SYMBOL(acpi_dev_present); * Return the next match of ACPI device if another matching device was present * at the moment of invocation, or NULL otherwise. * - * FIXME: The function does not tolerate the sudden disappearance of @adev, e.g. - * in the case of a hotplug event. That said, the caller should ensure that - * this will never happen. - * * The caller is responsible for invoking acpi_dev_put() on the returned device. + * On the other hand the function invokes acpi_dev_put() on the given @adev + * assuming that its reference counter had been increased beforehand. * * See additional information in acpi_dev_present() as well. */ @@ -880,6 +878,7 @@ acpi_dev_get_next_match_dev(struct acpi_device *adev, const char *hid, const cha match.hrv = hrv; dev = bus_find_device(&acpi_bus_type, start, &match, acpi_dev_match_cb); + acpi_dev_put(adev); return dev ? to_acpi_device(dev) : NULL; } EXPORT_SYMBOL(acpi_dev_get_next_match_dev); diff --git a/drivers/firmware/efi/dev-path-parser.c b/drivers/firmware/efi/dev-path-parser.c index 10d4457417a4..eb9c65f97841 100644 --- a/drivers/firmware/efi/dev-path-parser.c +++ b/drivers/firmware/efi/dev-path-parser.c @@ -34,7 +34,6 @@ static long __init parse_acpi_path(const struct efi_dev_path *node, break; if (!adev->pnp.unique_id && node->acpi.uid == 0) break; - acpi_dev_put(adev); } if (!adev) return -ENODEV; diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c index 4657e99df033..59a36f922675 100644 --- a/drivers/media/pci/intel/ipu3/cio2-bridge.c +++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c @@ -173,10 +173,8 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg, int ret; for_each_acpi_dev_match(adev, cfg->hid, NULL, -1) { - if (!adev->status.enabled) { - acpi_dev_put(adev); + if (!adev->status.enabled) continue; - } if (bridge->n_sensors >= CIO2_NUM_PORTS) { acpi_dev_put(adev); @@ -185,7 +183,6 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg, } sensor = &bridge->sensors[bridge->n_sensors]; - sensor->adev = adev; strscpy(sensor->name, cfg->hid, sizeof(sensor->name)); ret = cio2_bridge_read_acpi_buffer(adev, "SSDB", @@ -215,6 +212,7 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg, goto err_free_swnodes; } + sensor->adev = acpi_dev_get(adev); adev->fwnode.secondary = fwnode; dev_info(&cio2->dev, "Found supported sensor %s\n", diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 1ae993fee4a5..b9d434a93632 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -707,11 +707,6 @@ acpi_dev_get_first_match_dev(const char *hid, const char *uid, s64 hrv); * @hrv: Hardware Revision of the device, pass -1 to not check _HRV * * The caller is responsible for invoking acpi_dev_put() on the returned device. - * - * FIXME: Due to above requirement there is a window that may invalidate @adev - * and next iteration will use a dangling pointer, e.g. in the case of a - * hotplug event. That said, the caller should ensure that this will never - * happen. */ #define for_each_acpi_dev_match(adev, hid, uid, hrv) \ for (adev = acpi_dev_get_first_match_dev(hid, uid, hrv); \ -- cgit v1.2.3-58-ga151 From c81cfb6256d90ea5ba4a6fb280ea3b171be4e05c Mon Sep 17 00:00:00 2001 From: Kalesh AP Date: Sun, 18 Jul 2021 15:36:25 -0400 Subject: bnxt_en: don't disable an already disabled PCI device If device is already disabled in reset path and PCI io error is detected before the device could be enabled, driver could call pci_disable_device() for already disabled device. Fix this problem by calling pci_disable_device() only if the device is already enabled. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Kalesh AP Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index f56245eeef7b..fdfb75a1608d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -13436,7 +13436,8 @@ static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev, if (netif_running(netdev)) bnxt_close(netdev); - pci_disable_device(pdev); + if (pci_is_enabled(pdev)) + pci_disable_device(pdev); bnxt_free_ctx_mem(bp); kfree(bp->ctx); bp->ctx = NULL; -- cgit v1.2.3-58-ga151 From c08c59653415201ac46ab791c936ae804c45a11b Mon Sep 17 00:00:00 2001 From: Edwin Peer Date: Sun, 18 Jul 2021 15:36:26 -0400 Subject: bnxt_en: reject ETS settings that will starve a TC ETS proportions are presented to HWRM_QUEUE_COS2BW_CFG as minimum bandwidth constraints. Thus, zero is a legal value for a given TC. However, if all the other TCs sum up to 100%, then at least one hardware queue will starve, resulting in guaranteed TX timeouts. Reject such nonsensical configurations. Reviewed-by: Pavan Chebbi Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c index 8e90224c43a2..8a68df4d9e59 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c @@ -433,6 +433,7 @@ static int bnxt_hwrm_queue_dscp2pri_cfg(struct bnxt *bp, struct dcb_app *app, static int bnxt_ets_validate(struct bnxt *bp, struct ieee_ets *ets, u8 *tc) { int total_ets_bw = 0; + bool zero = false; u8 max_tc = 0; int i; @@ -453,13 +454,20 @@ static int bnxt_ets_validate(struct bnxt *bp, struct ieee_ets *ets, u8 *tc) break; case IEEE_8021QAZ_TSA_ETS: total_ets_bw += ets->tc_tx_bw[i]; + zero = zero || !ets->tc_tx_bw[i]; break; default: return -ENOTSUPP; } } - if (total_ets_bw > 100) + if (total_ets_bw > 100) { + netdev_warn(bp->dev, "rejecting ETS config exceeding available bandwidth\n"); return -EINVAL; + } + if (zero && total_ets_bw == 100) { + netdev_warn(bp->dev, "rejecting ETS config starving a TC\n"); + return -EINVAL; + } if (max_tc >= bp->max_tc) *tc = bp->max_tc; -- cgit v1.2.3-58-ga151 From 2c9f046bc377efd1f5e26e74817d5f96e9506c86 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 18 Jul 2021 15:36:27 -0400 Subject: bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe() The capabilities can change after firmware upgrade/downgrade, so we should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe() is called. Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur Reviewed-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c index a918e374f3c5..187ff643ad2a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c @@ -479,16 +479,17 @@ struct bnxt_en_dev *bnxt_ulp_probe(struct net_device *dev) if (!edev) return ERR_PTR(-ENOMEM); edev->en_ops = &bnxt_en_ops_tbl; - if (bp->flags & BNXT_FLAG_ROCEV1_CAP) - edev->flags |= BNXT_EN_FLAG_ROCEV1_CAP; - if (bp->flags & BNXT_FLAG_ROCEV2_CAP) - edev->flags |= BNXT_EN_FLAG_ROCEV2_CAP; edev->net = dev; edev->pdev = bp->pdev; edev->l2_db_size = bp->db_size; edev->l2_db_size_nc = bp->db_size; bp->edev = edev; } + edev->flags &= ~BNXT_EN_FLAG_ROCE_CAP; + if (bp->flags & BNXT_FLAG_ROCEV1_CAP) + edev->flags |= BNXT_EN_FLAG_ROCEV1_CAP; + if (bp->flags & BNXT_FLAG_ROCEV2_CAP) + edev->flags |= BNXT_EN_FLAG_ROCEV2_CAP; return bp->edev; } EXPORT_SYMBOL(bnxt_ulp_probe); -- cgit v1.2.3-58-ga151 From 6cd657cb3ee6f4de57e635b126ffbe0e51d00f1a Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 18 Jul 2021 15:36:28 -0400 Subject: bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task() In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after we acquire the rtnl_lock. If the flag is set, we need to abort. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index fdfb75a1608d..39908a3d9460 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -11992,6 +11992,10 @@ static void bnxt_fw_reset_task(struct work_struct *work) } bp->fw_reset_timestamp = jiffies; rtnl_lock(); + if (test_bit(BNXT_STATE_ABORT_ERR, &bp->state)) { + rtnl_unlock(); + goto fw_reset_abort; + } bnxt_fw_reset_close(bp); if (bp->fw_cap & BNXT_FW_CAP_ERR_RECOVER_RELOAD) { bp->fw_reset_state = BNXT_FW_RESET_STATE_POLL_FW_DOWN; -- cgit v1.2.3-58-ga151 From 3958b1da725a477b4a222183d16a14d85445d4b6 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Sun, 18 Jul 2021 15:36:29 -0400 Subject: bnxt_en: fix error path of FW reset When bnxt_open() fails in the firmware reset path, the driver needs to gracefully abort, but it is executing code that should be invoked only in the success path. Define a function to abort FW reset and consolidate all error paths to call this new function. Fixes: dab62e7c2de7 ("bnxt_en: Implement faster recovery for firmware fatal error.") Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 39908a3d9460..f2f1136fd492 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -11959,10 +11959,21 @@ static bool bnxt_fw_reset_timeout(struct bnxt *bp) (bp->fw_reset_max_dsecs * HZ / 10)); } +static void bnxt_fw_reset_abort(struct bnxt *bp, int rc) +{ + clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state); + if (bp->fw_reset_state != BNXT_FW_RESET_STATE_POLL_VF) { + bnxt_ulp_start(bp, rc); + bnxt_dl_health_status_update(bp, false); + } + bp->fw_reset_state = 0; + dev_close(bp->dev); +} + static void bnxt_fw_reset_task(struct work_struct *work) { struct bnxt *bp = container_of(work, struct bnxt, fw_reset_task.work); - int rc; + int rc = 0; if (!test_bit(BNXT_STATE_IN_FW_RESET, &bp->state)) { netdev_err(bp->dev, "bnxt_fw_reset_task() called when not in fw reset mode!\n"); @@ -11993,8 +12004,9 @@ static void bnxt_fw_reset_task(struct work_struct *work) bp->fw_reset_timestamp = jiffies; rtnl_lock(); if (test_bit(BNXT_STATE_ABORT_ERR, &bp->state)) { + bnxt_fw_reset_abort(bp, rc); rtnl_unlock(); - goto fw_reset_abort; + return; } bnxt_fw_reset_close(bp); if (bp->fw_cap & BNXT_FW_CAP_ERR_RECOVER_RELOAD) { @@ -12043,6 +12055,7 @@ static void bnxt_fw_reset_task(struct work_struct *work) if (val == 0xffff) { if (bnxt_fw_reset_timeout(bp)) { netdev_err(bp->dev, "Firmware reset aborted, PCI config space invalid\n"); + rc = -ETIMEDOUT; goto fw_reset_abort; } bnxt_queue_fw_reset_work(bp, HZ / 1000); @@ -12052,6 +12065,7 @@ static void bnxt_fw_reset_task(struct work_struct *work) clear_bit(BNXT_STATE_FW_FATAL_COND, &bp->state); if (pci_enable_device(bp->pdev)) { netdev_err(bp->dev, "Cannot re-enable PCI device\n"); + rc = -ENODEV; goto fw_reset_abort; } pci_set_master(bp->pdev); @@ -12078,9 +12092,10 @@ static void bnxt_fw_reset_task(struct work_struct *work) } rc = bnxt_open(bp->dev); if (rc) { - netdev_err(bp->dev, "bnxt_open_nic() failed\n"); - clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state); - dev_close(bp->dev); + netdev_err(bp->dev, "bnxt_open() failed during FW reset\n"); + bnxt_fw_reset_abort(bp, rc); + rtnl_unlock(); + return; } bp->fw_reset_state = 0; @@ -12107,12 +12122,8 @@ fw_reset_abort_status: netdev_err(bp->dev, "fw_health_status 0x%x\n", sts); } fw_reset_abort: - clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state); - if (bp->fw_reset_state != BNXT_FW_RESET_STATE_POLL_VF) - bnxt_dl_health_status_update(bp, false); - bp->fw_reset_state = 0; rtnl_lock(); - dev_close(bp->dev); + bnxt_fw_reset_abort(bp, rc); rtnl_unlock(); } -- cgit v1.2.3-58-ga151 From 96bdd4b9ea7ef9a12db8fdd0ce90e37dffbd3703 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 18 Jul 2021 15:36:30 -0400 Subject: bnxt_en: Validate vlan protocol ID on RX packets Only pass supported VLAN protocol IDs for stripped VLAN tags to the stack. The stack will hit WARN() if the protocol ID is unsupported. Existing firmware sets up the chip to strip 0x8100, 0x88a8, 0x9100. Only the 1st two protocols are supported by the kernel. Fixes: a196e96bb68f ("bnxt_en: clean up VLAN feature bit handling") Reviewed-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index f2f1136fd492..169f093e01de 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1671,11 +1671,16 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp, if ((tpa_info->flags2 & RX_CMP_FLAGS2_META_FORMAT_VLAN) && (skb->dev->features & BNXT_HW_FEATURE_VLAN_ALL_RX)) { - u16 vlan_proto = tpa_info->metadata >> - RX_CMP_FLAGS2_METADATA_TPID_SFT; + __be16 vlan_proto = htons(tpa_info->metadata >> + RX_CMP_FLAGS2_METADATA_TPID_SFT); u16 vtag = tpa_info->metadata & RX_CMP_FLAGS2_METADATA_TCI_MASK; - __vlan_hwaccel_put_tag(skb, htons(vlan_proto), vtag); + if (eth_type_vlan(vlan_proto)) { + __vlan_hwaccel_put_tag(skb, vlan_proto, vtag); + } else { + dev_kfree_skb(skb); + return NULL; + } } skb_checksum_none_assert(skb); @@ -1897,9 +1902,15 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr, (skb->dev->features & BNXT_HW_FEATURE_VLAN_ALL_RX)) { u32 meta_data = le32_to_cpu(rxcmp1->rx_cmp_meta_data); u16 vtag = meta_data & RX_CMP_FLAGS2_METADATA_TCI_MASK; - u16 vlan_proto = meta_data >> RX_CMP_FLAGS2_METADATA_TPID_SFT; + __be16 vlan_proto = htons(meta_data >> + RX_CMP_FLAGS2_METADATA_TPID_SFT); - __vlan_hwaccel_put_tag(skb, htons(vlan_proto), vtag); + if (eth_type_vlan(vlan_proto)) { + __vlan_hwaccel_put_tag(skb, vlan_proto, vtag); + } else { + dev_kfree_skb(skb); + goto next_rx; + } } skb_checksum_none_assert(skb); -- cgit v1.2.3-58-ga151 From 11a39259ff79b74bc99f8b7c44075a2d6d5e7ab1 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Sun, 18 Jul 2021 15:36:31 -0400 Subject: bnxt_en: Check abort error state in bnxt_half_open_nic() bnxt_half_open_nic() is called during during ethtool self test and is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_half_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The ethtool self test will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_half_open_nic() were to continue in this error state, it may crash like this: bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Process ethtool (pid: 333327, stack limit = 0x0000000046476577) Call trace: bnxt_alloc_mem+0x444/0xef0 [bnxt_en] bnxt_half_open_nic+0x24/0xb8 [bnxt_en] bnxt_self_test+0x2dc/0x390 [bnxt_en] ethtool_self_test+0xe0/0x1f8 dev_ethtool+0x1744/0x22d0 dev_ioctl+0x190/0x3e0 sock_ioctl+0x238/0x480 do_vfs_ioctl+0xc4/0x758 ksys_ioctl+0x84/0xb8 __arm64_sys_ioctl+0x28/0x38 el0_svc_handler+0xb0/0x180 el0_svc+0x8/0xc Fixes: a1301f08c5ac ("bnxt_en: Check abort error state in bnxt_open_nic().") Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 169f093e01de..31eb3c00851a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -10208,6 +10208,12 @@ int bnxt_half_open_nic(struct bnxt *bp) { int rc = 0; + if (test_bit(BNXT_STATE_ABORT_ERR, &bp->state)) { + netdev_err(bp->dev, "A previous firmware reset has not completed, aborting half open\n"); + rc = -ENODEV; + goto half_open_err; + } + rc = bnxt_alloc_mem(bp, false); if (rc) { netdev_err(bp->dev, "bnxt_alloc_mem err: %x\n", rc); -- cgit v1.2.3-58-ga151 From d7859afb6880249039b178fdfb1bef94fd954cf2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 18 Jul 2021 15:36:32 -0400 Subject: bnxt_en: Move bnxt_ptp_init() to bnxt_open() The device needs to be in ifup state for PTP to function, so move bnxt_ptp_init() to bnxt_open(). This means that the PHC will be registered during bnxt_open(). This also makes firmware reset work correctly. PTP configurations may change after firmware upgrade or downgrade. bnxt_open() will be called after firmware reset, so it will work properly. bnxt_ptp_start() is now incorporated into bnxt_ptp_init(). We now also need to call bnxt_ptp_clear() in bnxt_close(). Fixes: 93cb62d98e9c ("bnxt_en: Enable hardware PTP support") Cc: Richard Cochran Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 16 +++++++++------- drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c | 24 +++++++----------------- drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h | 1 - 3 files changed, 16 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 31eb3c00851a..b8b73c210995 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -10134,7 +10134,6 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) } } - bnxt_ptp_start(bp); rc = bnxt_init_nic(bp, irq_re_init); if (rc) { netdev_err(bp->dev, "bnxt_init_nic err: %x\n", rc); @@ -10273,9 +10272,16 @@ static int bnxt_open(struct net_device *dev) rc = bnxt_hwrm_if_change(bp, true); if (rc) return rc; + + if (bnxt_ptp_init(bp)) { + netdev_warn(dev, "PTP initialization failed.\n"); + kfree(bp->ptp_cfg); + bp->ptp_cfg = NULL; + } rc = __bnxt_open_nic(bp, true, true); if (rc) { bnxt_hwrm_if_change(bp, false); + bnxt_ptp_clear(bp); } else { if (test_and_clear_bit(BNXT_STATE_FW_RESET_DET, &bp->state)) { if (!test_bit(BNXT_STATE_IN_FW_RESET, &bp->state)) { @@ -10366,6 +10372,7 @@ static int bnxt_close(struct net_device *dev) { struct bnxt *bp = netdev_priv(dev); + bnxt_ptp_clear(bp); bnxt_hwmon_close(bp); bnxt_close_nic(bp, true, true); bnxt_hwrm_shutdown_link(bp); @@ -11352,6 +11359,7 @@ static void bnxt_fw_reset_close(struct bnxt *bp) bnxt_clear_int_mode(bp); pci_disable_device(bp->pdev); } + bnxt_ptp_clear(bp); __bnxt_close_nic(bp, true, false); bnxt_vf_reps_free(bp); bnxt_clear_int_mode(bp); @@ -12694,7 +12702,6 @@ static void bnxt_remove_one(struct pci_dev *pdev) if (BNXT_PF(bp)) devlink_port_type_clear(&bp->dl_port); - bnxt_ptp_clear(bp); pci_disable_pcie_error_reporting(pdev); unregister_netdev(dev); clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state); @@ -13278,11 +13285,6 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rc); } - if (bnxt_ptp_init(bp)) { - netdev_warn(dev, "PTP initialization failed.\n"); - kfree(bp->ptp_cfg); - bp->ptp_cfg = NULL; - } bnxt_inv_fw_health_reg(bp); bnxt_dl_register(bp); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c index f698b6bd4ff8..9089e7f3fbd4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c @@ -385,22 +385,6 @@ int bnxt_get_rx_ts_p5(struct bnxt *bp, u64 *ts, u32 pkt_ts) return 0; } -void bnxt_ptp_start(struct bnxt *bp) -{ - struct bnxt_ptp_cfg *ptp = bp->ptp_cfg; - - if (!ptp) - return; - - if (bp->flags & BNXT_FLAG_CHIP_P5) { - spin_lock_bh(&ptp->ptp_lock); - ptp->current_time = bnxt_refclk_read(bp, NULL); - WRITE_ONCE(ptp->old_time, ptp->current_time); - spin_unlock_bh(&ptp->ptp_lock); - ptp_schedule_worker(ptp->ptp_clock, 0); - } -} - static const struct ptp_clock_info bnxt_ptp_caps = { .owner = THIS_MODULE, .name = "bnxt clock", @@ -450,7 +434,13 @@ int bnxt_ptp_init(struct bnxt *bp) bnxt_unmap_ptp_regs(bp); return err; } - + if (bp->flags & BNXT_FLAG_CHIP_P5) { + spin_lock_bh(&ptp->ptp_lock); + ptp->current_time = bnxt_refclk_read(bp, NULL); + WRITE_ONCE(ptp->old_time, ptp->current_time); + spin_unlock_bh(&ptp->ptp_lock); + ptp_schedule_worker(ptp->ptp_clock, 0); + } return 0; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h index 6b6245750e20..4135ea3ec788 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h @@ -75,7 +75,6 @@ int bnxt_hwtstamp_set(struct net_device *dev, struct ifreq *ifr); int bnxt_hwtstamp_get(struct net_device *dev, struct ifreq *ifr); int bnxt_get_tx_ts_p5(struct bnxt *bp, struct sk_buff *skb); int bnxt_get_rx_ts_p5(struct bnxt *bp, u64 *ts, u32 pkt_ts); -void bnxt_ptp_start(struct bnxt *bp); int bnxt_ptp_init(struct bnxt *bp); void bnxt_ptp_clear(struct bnxt *bp); #endif -- cgit v1.2.3-58-ga151 From de5bf19414fec860168f05d00d574562bd9d86d1 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 18 Jul 2021 15:36:33 -0400 Subject: bnxt_en: Fix PTP capability discovery The current PTP initialization logic does not account for firmware reset that may cause PTP capability to change. The valid pointer bp->ptp_cfg is used to indicate that the device is capable of PTP and that it has been initialized. So we must clean up bp->ptp_cfg and free it if the firmware after reset does not support PTP. Fixes: 93cb62d98e9c ("bnxt_en: Enable hardware PTP support") Cc: Richard Cochran Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index b8b73c210995..4db162cee911 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -7574,8 +7574,12 @@ static int __bnxt_hwrm_func_qcaps(struct bnxt *bp) bp->flags &= ~BNXT_FLAG_WOL_CAP; if (flags & FUNC_QCAPS_RESP_FLAGS_WOL_MAGICPKT_SUPPORTED) bp->flags |= BNXT_FLAG_WOL_CAP; - if (flags & FUNC_QCAPS_RESP_FLAGS_PTP_SUPPORTED) + if (flags & FUNC_QCAPS_RESP_FLAGS_PTP_SUPPORTED) { __bnxt_hwrm_ptp_qcfg(bp); + } else { + kfree(bp->ptp_cfg); + bp->ptp_cfg = NULL; + } } else { #ifdef CONFIG_BNXT_SRIOV struct bnxt_vf_info *vf = &bp->vf; -- cgit v1.2.3-58-ga151 From b16f3299ae1aa3c327e1fb742d0379ae4d6e86f2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 18 Jul 2021 13:38:34 -0700 Subject: net: hisilicon: rename CACHE_LINE_MASK to avoid redefinition Building on ARCH=arc causes a "redefined" warning, so rename this driver's CACHE_LINE_MASK to avoid the warning. ../drivers/net/ethernet/hisilicon/hip04_eth.c:134: warning: "CACHE_LINE_MASK" redefined 134 | #define CACHE_LINE_MASK 0x3F In file included from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:19, from ../include/linux/list.h:9, from ../include/linux/module.h:12, from ../drivers/net/ethernet/hisilicon/hip04_eth.c:7: ../arch/arc/include/asm/cache.h:17: note: this is the location of the previous definition 17 | #define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1)) Fixes: d413779cdd93 ("net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC") Signed-off-by: Randy Dunlap Cc: Vineet Gupta Cc: Jiangfeng Xiao Cc: "David S. Miller" Cc: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hip04_eth.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c index 12f6c2442a7a..e53512f6878a 100644 --- a/drivers/net/ethernet/hisilicon/hip04_eth.c +++ b/drivers/net/ethernet/hisilicon/hip04_eth.c @@ -131,7 +131,7 @@ /* buf unit size is cache_line_size, which is 64, so the shift is 6 */ #define PPE_BUF_SIZE_SHIFT 6 #define PPE_TX_BUF_HOLD BIT(31) -#define CACHE_LINE_MASK 0x3F +#define SOC_CACHE_LINE_MASK 0x3F #else #define PPE_CFG_QOS_VMID_GRP_SHIFT 8 #define PPE_CFG_RX_CTRL_ALIGN_SHIFT 11 @@ -531,8 +531,8 @@ hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) #if defined(CONFIG_HI13X1_GMAC) desc->cfg = (__force u32)cpu_to_be32(TX_CLEAR_WB | TX_FINISH_CACHE_INV | TX_RELEASE_TO_PPE | priv->port << TX_POOL_SHIFT); - desc->data_offset = (__force u32)cpu_to_be32(phys & CACHE_LINE_MASK); - desc->send_addr = (__force u32)cpu_to_be32(phys & ~CACHE_LINE_MASK); + desc->data_offset = (__force u32)cpu_to_be32(phys & SOC_CACHE_LINE_MASK); + desc->send_addr = (__force u32)cpu_to_be32(phys & ~SOC_CACHE_LINE_MASK); #else desc->cfg = (__force u32)cpu_to_be32(TX_CLEAR_WB | TX_FINISH_CACHE_INV); desc->send_addr = (__force u32)cpu_to_be32(phys); -- cgit v1.2.3-58-ga151 From fa2bf6baf2b1d8350e5193ce4014bdddc51a25d0 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Mon, 19 Jul 2021 14:29:32 +0530 Subject: octeontx2-af: Enable transmit side LBK link For enabling VF-VF switching the packets egressing out of CGX mapped VFs needed to be sent to LBK so that same packets are received back to the system. But the LBK link also needs to be enabled in addition to a VF's mapped CGX_LMAC link otherwise hardware raises send error interrupt indicating selected LBK link is not enabled in NIX_AF_TL3_TL2X_LINKX_CFG register. Hence this patch enables all LBK links in TL3_TL2_LINKX_CFG registers. Also to enable packet flow between PFs/VFs of NIX0 to PFs/VFs of NIX1(in 98xx silicon) the NPC TX DMAC rules has to be installed such that rules must be hit for any TX interface i.e., NIX0-TX or NIX1-TX provided DMAC match creteria is met. Hence this patch changes the behavior such that MCAM is programmed to match with any NIX0/1-TX interface for TX rules. Signed-off-by: Subbaraya Sundeep Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 6 ++++ drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 2 ++ .../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 32 ++++++++++++++++++++++ .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 15 ++++++++-- .../net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 9 +++++- 5 files changed, 61 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c index 10cddf1ac7b9..086eb6d283ee 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c @@ -2859,6 +2859,12 @@ static int rvu_enable_sriov(struct rvu *rvu) if (!vfs) return 0; + /* LBK channel number 63 is used for switching packets between + * CGX mapped VFs. Hence limit LBK pairs till 62 only. + */ + if (vfs > 62) + vfs = 62; + /* Save VFs number for reference in VF interrupts handlers. * Since interrupts might start arriving during SRIOV enablement * ordinary API cannot be used to get number of enabled VFs. diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index 10e58a5d5861..e53f530e5e31 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -415,6 +415,8 @@ struct npc_kpu_profile_adapter { size_t kpus; }; +#define RVU_SWITCH_LBK_CHAN 63 + struct rvu { void __iomem *afreg_base; void __iomem *pfreg_base; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index aeae37704428..a2d69eaac4f8 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -1952,6 +1952,35 @@ static void nix_tl1_default_cfg(struct rvu *rvu, struct nix_hw *nix_hw, pfvf_map[schq] = TXSCH_SET_FLAG(pfvf_map[schq], NIX_TXSCHQ_CFG_DONE); } +static void rvu_nix_tx_tl2_cfg(struct rvu *rvu, int blkaddr, + u16 pcifunc, struct nix_txsch *txsch) +{ + struct rvu_hwinfo *hw = rvu->hw; + int lbk_link_start, lbk_links; + u8 pf = rvu_get_pf(pcifunc); + int schq; + + if (!is_pf_cgxmapped(rvu, pf)) + return; + + lbk_link_start = hw->cgx_links; + + for (schq = 0; schq < txsch->schq.max; schq++) { + if (TXSCH_MAP_FUNC(txsch->pfvf_map[schq]) != pcifunc) + continue; + /* Enable all LBK links with channel 63 by default so that + * packets can be sent to LBK with a NPC TX MCAM rule + */ + lbk_links = hw->lbk_links; + while (lbk_links--) + rvu_write64(rvu, blkaddr, + NIX_AF_TL3_TL2X_LINKX_CFG(schq, + lbk_link_start + + lbk_links), + BIT_ULL(12) | RVU_SWITCH_LBK_CHAN); + } +} + int rvu_mbox_handler_nix_txschq_cfg(struct rvu *rvu, struct nix_txschq_config *req, struct msg_rsp *rsp) @@ -2040,6 +2069,9 @@ int rvu_mbox_handler_nix_txschq_cfg(struct rvu *rvu, rvu_write64(rvu, blkaddr, reg, regval); } + rvu_nix_tx_tl2_cfg(rvu, blkaddr, pcifunc, + &nix_hw->txsch[NIX_TXSCH_LVL_TL2]); + return 0; } diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index 3612e0a2cab3..16c557cbe6a0 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -468,6 +468,8 @@ static void npc_config_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam, { int bank = npc_get_bank(mcam, index); int kw = 0, actbank, actindex; + u8 tx_intf_mask = ~intf & 0x3; + u8 tx_intf = intf; u64 cam0, cam1; actbank = bank; /* Save bank id, to set action later on */ @@ -488,12 +490,21 @@ static void npc_config_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam, */ for (; bank < (actbank + mcam->banks_per_entry); bank++, kw = kw + 2) { /* Interface should be set in all banks */ + if (is_npc_intf_tx(intf)) { + /* Last bit must be set and rest don't care + * for TX interfaces + */ + tx_intf_mask = 0x1; + tx_intf = intf & tx_intf_mask; + tx_intf_mask = ~tx_intf & tx_intf_mask; + } + rvu_write64(rvu, blkaddr, NPC_AF_MCAMEX_BANKX_CAMX_INTF(index, bank, 1), - intf); + tx_intf); rvu_write64(rvu, blkaddr, NPC_AF_MCAMEX_BANKX_CAMX_INTF(index, bank, 0), - ~intf & 0x3); + tx_intf_mask); /* Set the match key */ npc_get_keyword(entry, kw, &cam0, &cam1); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c index 68633145a8b8..92d64bdff0ea 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c @@ -949,9 +949,16 @@ static void npc_update_tx_entry(struct rvu *rvu, struct rvu_pfvf *pfvf, struct npc_install_flow_req *req, u16 target) { struct nix_tx_action action; + u64 mask = ~0ULL; + + /* If AF is installing then do not care about + * PF_FUNC in Send Descriptor + */ + if (is_pffunc_af(req->hdr.pcifunc)) + mask = 0; npc_update_entry(rvu, NPC_PF_FUNC, entry, (__force u16)htons(target), - 0, ~0ULL, 0, NIX_INTF_TX); + 0, mask, 0, NIX_INTF_TX); *(u64 *)&action = 0x00; action.op = req->op; -- cgit v1.2.3-58-ga151 From cb7a6b3bac1d0d773f2b6cc35f6bab61eb5de5ef Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Mon, 19 Jul 2021 14:29:33 +0530 Subject: octeontx2-af: Prepare for allocating MCAM rules for AF AF till now only manages the allocation and freeing of MCAM rules for other PF/VFs in system. To implement L2 switching between all CGX mapped PF and VFs, AF requires MCAM entries for DMAC rules for each PF and VF. This patch modifies AF driver such that AF can also allocate MCAM rules and install rules for other PFs and VFs. All the checks like channel verification for RX rules and PF_FUNC verification for TX rules are relaxed in case AF is allocating or installing rules. Also all the entry and counter to owner mappings are set to NPC_MCAM_INVALID_MAP when they are free indicating those are not allocated to AF nor PF/VFs. This patch also ensures that AF allocated and installed entries are displayed in debugfs. Signed-off-by: Subbaraya Sundeep Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- .../ethernet/marvell/octeontx2/af/rvu_debugfs.c | 5 +--- .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 32 ++++++++++++++++------ .../net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 11 ++++---- 3 files changed, 30 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c index 370d4ca1e5ed..9b2dfbf90e51 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c @@ -2113,9 +2113,6 @@ static void rvu_print_npc_mcam_info(struct seq_file *s, int entry_acnt, entry_ecnt; int cntr_acnt, cntr_ecnt; - /* Skip PF0 */ - if (!pcifunc) - return; rvu_npc_get_mcam_entry_alloc_info(rvu, pcifunc, blkaddr, &entry_acnt, &entry_ecnt); rvu_npc_get_mcam_counter_alloc_info(rvu, pcifunc, blkaddr, @@ -2298,7 +2295,7 @@ static void rvu_dbg_npc_mcam_show_flows(struct seq_file *s, static void rvu_dbg_npc_mcam_show_action(struct seq_file *s, struct rvu_npc_mcam_rule *rule) { - if (rule->intf == NIX_INTF_TX) { + if (is_npc_intf_tx(rule->intf)) { switch (rule->tx_action.op) { case NIX_TX_ACTIONOP_DROP: seq_puts(s, "\taction: Drop\n"); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index 16c557cbe6a0..1097291aaa45 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -442,7 +442,8 @@ static void npc_fixup_vf_rule(struct rvu *rvu, struct npc_mcam *mcam, owner = mcam->entry2pfvf_map[index]; target_func = (entry->action >> 4) & 0xffff; /* do nothing when target is LBK/PF or owner is not PF */ - if (is_afvf(target_func) || (owner & RVU_PFVF_FUNC_MASK) || + if (is_pffunc_af(owner) || is_afvf(target_func) || + (owner & RVU_PFVF_FUNC_MASK) || !(target_func & RVU_PFVF_FUNC_MASK)) return; @@ -661,6 +662,7 @@ void rvu_npc_install_ucast_entry(struct rvu *rvu, u16 pcifunc, eth_broadcast_addr((u8 *)&req.mask.dmac); req.features = BIT_ULL(NPC_DMAC); req.channel = chan; + req.chan_mask = 0xFFFU; req.intf = pfvf->nix_rx_intf; req.op = action.op; req.hdr.pcifunc = 0; /* AF is requester */ @@ -810,6 +812,7 @@ void rvu_npc_install_bcast_match_entry(struct rvu *rvu, u16 pcifunc, eth_broadcast_addr((u8 *)&req.mask.dmac); req.features = BIT_ULL(NPC_DMAC); req.channel = chan; + req.chan_mask = 0xFFFU; req.intf = pfvf->nix_rx_intf; req.entry = index; req.hdr.pcifunc = 0; /* AF is requester */ @@ -1756,6 +1759,8 @@ static int npc_mcam_rsrcs_init(struct rvu *rvu, int blkaddr) int nixlf_count = rvu_get_nixlf_count(rvu); struct npc_mcam *mcam = &rvu->hw->mcam; int rsvd, err; + u16 index; + int cntr; u64 cfg; /* Actual number of MCAM entries vary by entry size */ @@ -1856,6 +1861,14 @@ static int npc_mcam_rsrcs_init(struct rvu *rvu, int blkaddr) if (!mcam->entry2target_pffunc) goto free_mem; + for (index = 0; index < mcam->bmap_entries; index++) { + mcam->entry2pfvf_map[index] = NPC_MCAM_INVALID_MAP; + mcam->entry2cntr_map[index] = NPC_MCAM_INVALID_MAP; + } + + for (cntr = 0; cntr < mcam->counters.max; cntr++) + mcam->cntr2pfvf_map[cntr] = NPC_MCAM_INVALID_MAP; + mutex_init(&mcam->lock); return 0; @@ -2573,7 +2586,7 @@ int rvu_mbox_handler_npc_mcam_alloc_entry(struct rvu *rvu, } /* Alloc request from PFFUNC with no NIXLF attached should be denied */ - if (!is_nixlf_attached(rvu, pcifunc)) + if (!is_pffunc_af(pcifunc) && !is_nixlf_attached(rvu, pcifunc)) return NPC_MCAM_ALLOC_DENIED; return npc_mcam_alloc_entries(mcam, pcifunc, req, rsp); @@ -2593,7 +2606,7 @@ int rvu_mbox_handler_npc_mcam_free_entry(struct rvu *rvu, return NPC_MCAM_INVALID_REQ; /* Free request from PFFUNC with no NIXLF attached, ignore */ - if (!is_nixlf_attached(rvu, pcifunc)) + if (!is_pffunc_af(pcifunc) && !is_nixlf_attached(rvu, pcifunc)) return NPC_MCAM_INVALID_REQ; mutex_lock(&mcam->lock); @@ -2605,7 +2618,7 @@ int rvu_mbox_handler_npc_mcam_free_entry(struct rvu *rvu, if (rc) goto exit; - mcam->entry2pfvf_map[req->entry] = 0; + mcam->entry2pfvf_map[req->entry] = NPC_MCAM_INVALID_MAP; mcam->entry2target_pffunc[req->entry] = 0x0; npc_mcam_clear_bit(mcam, req->entry); npc_enable_mcam_entry(rvu, mcam, blkaddr, req->entry, false); @@ -2690,13 +2703,14 @@ int rvu_mbox_handler_npc_mcam_write_entry(struct rvu *rvu, else nix_intf = pfvf->nix_rx_intf; - if (npc_mcam_verify_channel(rvu, pcifunc, req->intf, channel)) { + if (!is_pffunc_af(pcifunc) && + npc_mcam_verify_channel(rvu, pcifunc, req->intf, channel)) { rc = NPC_MCAM_INVALID_REQ; goto exit; } - if (npc_mcam_verify_pf_func(rvu, &req->entry_data, req->intf, - pcifunc)) { + if (!is_pffunc_af(pcifunc) && + npc_mcam_verify_pf_func(rvu, &req->entry_data, req->intf, pcifunc)) { rc = NPC_MCAM_INVALID_REQ; goto exit; } @@ -2847,7 +2861,7 @@ int rvu_mbox_handler_npc_mcam_alloc_counter(struct rvu *rvu, return NPC_MCAM_INVALID_REQ; /* If the request is from a PFFUNC with no NIXLF attached, ignore */ - if (!is_nixlf_attached(rvu, pcifunc)) + if (!is_pffunc_af(pcifunc) && !is_nixlf_attached(rvu, pcifunc)) return NPC_MCAM_INVALID_REQ; /* Since list of allocated counter IDs needs to be sent to requester, @@ -3092,7 +3106,7 @@ int rvu_mbox_handler_npc_mcam_alloc_and_write_entry(struct rvu *rvu, if (rc) { /* Free allocated MCAM entry */ mutex_lock(&mcam->lock); - mcam->entry2pfvf_map[entry] = 0; + mcam->entry2pfvf_map[entry] = NPC_MCAM_INVALID_MAP; npc_mcam_clear_bit(mcam, entry); mutex_unlock(&mcam->lock); return rc; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c index 92d64bdff0ea..c1f35a0971ad 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c @@ -913,11 +913,9 @@ static void npc_update_rx_entry(struct rvu *rvu, struct rvu_pfvf *pfvf, struct npc_install_flow_req *req, u16 target) { struct nix_rx_action action; - u64 chan_mask; - chan_mask = req->chan_mask ? req->chan_mask : ~0ULL; - npc_update_entry(rvu, NPC_CHAN, entry, req->channel, 0, chan_mask, 0, - NIX_INTF_RX); + npc_update_entry(rvu, NPC_CHAN, entry, req->channel, 0, req->chan_mask, + 0, NIX_INTF_RX); *(u64 *)&action = 0x00; action.pf_func = target; @@ -1171,7 +1169,9 @@ int rvu_mbox_handler_npc_install_flow(struct rvu *rvu, if (err) return err; - if (npc_mcam_verify_channel(rvu, target, req->intf, req->channel)) + /* Skip channel validation if AF is installing */ + if (!is_pffunc_af(req->hdr.pcifunc) && + npc_mcam_verify_channel(rvu, target, req->intf, req->channel)) return -EINVAL; pfvf = rvu_get_pfvf(rvu, target); @@ -1187,6 +1187,7 @@ int rvu_mbox_handler_npc_install_flow(struct rvu *rvu, eth_broadcast_addr((u8 *)&req->mask.dmac); } + /* Proceed if NIXLF is attached or not for TX rules */ err = nix_get_nixlf(rvu, target, &nixlf, NULL); if (err && is_npc_intf_rx(req->intf) && !pf_set_vfs_mac) return -EINVAL; -- cgit v1.2.3-58-ga151 From 23109f8dd06d0bd04c9360cf7c501c97b0ab1545 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Mon, 19 Jul 2021 14:29:34 +0530 Subject: octeontx2-af: Introduce internal packet switching As of now any communication between CGXs PFs and their VFs within the system is possible only by external switches sending packets back to the system. This patch adds internal switching support. Broadcast packet replication is not covered here. RVU admin function (AF) maintains MAC addresses of all interfaces in the system. When switching is enabled, MCAM entries are allocated to install rules such that packets with DMAC matching any of the internal interface MAC addresses is punted back into the system via the loopback channel. On the receive side the default unicast rules are modified to not check for ingress channel. So any packet with matching DMAC irrespective of which interface it is coming from will be forwarded to the respective PF/VF interface. The transmit side rules and default unicast rules are updated if user changes MAC address of an interface. Signed-off-by: Subbaraya Sundeep Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/Makefile | 2 +- drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 4 +- drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 19 ++ .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 3 + .../ethernet/marvell/octeontx2/af/rvu_devlink.c | 48 +++- .../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 4 + .../net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 9 +- .../net/ethernet/marvell/octeontx2/af/rvu_switch.c | 258 +++++++++++++++++++++ 8 files changed, 336 insertions(+), 11 deletions(-) create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_switch.c (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/Makefile b/drivers/net/ethernet/marvell/octeontx2/af/Makefile index 1a3455620b38..cc8ac36cf687 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/Makefile +++ b/drivers/net/ethernet/marvell/octeontx2/af/Makefile @@ -10,4 +10,4 @@ obj-$(CONFIG_OCTEONTX2_AF) += rvu_af.o rvu_mbox-y := mbox.o rvu_trace.o rvu_af-y := cgx.o rvu.o rvu_cgx.o rvu_npa.o rvu_nix.o \ rvu_reg.o rvu_npc.o rvu_debugfs.o ptp.o rvu_npc_fs.o \ - rvu_cpt.o rvu_devlink.o rpm.o rvu_cn10k.o + rvu_cpt.o rvu_devlink.o rpm.o rvu_cn10k.o rvu_switch.o diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c index 086eb6d283ee..017163fb3cd5 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c @@ -1314,7 +1314,7 @@ int rvu_mbox_handler_detach_resources(struct rvu *rvu, return rvu_detach_rsrcs(rvu, detach, detach->hdr.pcifunc); } -static int rvu_get_nix_blkaddr(struct rvu *rvu, u16 pcifunc) +int rvu_get_nix_blkaddr(struct rvu *rvu, u16 pcifunc) { struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, pcifunc); int blkaddr = BLKADDR_NIX0, vf; @@ -3007,6 +3007,8 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* Initialize debugfs */ rvu_dbg_init(rvu); + mutex_init(&rvu->rswitch.switch_lock); + return 0; err_dl: rvu_unregister_dl(rvu); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index e53f530e5e31..91503fb2762c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -417,6 +417,14 @@ struct npc_kpu_profile_adapter { #define RVU_SWITCH_LBK_CHAN 63 +struct rvu_switch { + struct mutex switch_lock; /* Serialize flow installation */ + u32 used_entries; + u16 *entry2pcifunc; + u16 mode; + u16 start_entry; +}; + struct rvu { void __iomem *afreg_base; void __iomem *pfreg_base; @@ -447,6 +455,7 @@ struct rvu { /* CGX */ #define PF_CGXMAP_BASE 1 /* PF 0 is reserved for RVU PF */ + u16 cgx_mapped_vfs; /* maximum CGX mapped VFs */ u8 cgx_mapped_pfs; u8 cgx_cnt_max; /* CGX port count max */ u8 *pf2cgxlmac_map; /* pf to cgx_lmac map */ @@ -479,6 +488,9 @@ struct rvu { struct rvu_debugfs rvu_dbg; #endif struct rvu_devlink *rvu_dl; + + /* RVU switch implementation over NPC with DMAC rules */ + struct rvu_switch rswitch; }; static inline void rvu_write64(struct rvu *rvu, u64 block, u64 offset, u64 val) @@ -693,6 +705,7 @@ int nix_aq_context_read(struct rvu *rvu, struct nix_hw *nix_hw, struct nix_cn10k_aq_enq_req *aq_req, struct nix_cn10k_aq_enq_rsp *aq_rsp, u16 pcifunc, u8 ctype, u32 qidx); +int rvu_get_nix_blkaddr(struct rvu *rvu, u16 pcifunc); /* NPC APIs */ int rvu_npc_init(struct rvu *rvu); @@ -770,4 +783,10 @@ void rvu_dbg_exit(struct rvu *rvu); static inline void rvu_dbg_init(struct rvu *rvu) {} static inline void rvu_dbg_exit(struct rvu *rvu) {} #endif + +/* RVU Switch */ +void rvu_switch_enable(struct rvu *rvu); +void rvu_switch_disable(struct rvu *rvu); +void rvu_switch_update_rules(struct rvu *rvu, u16 pcifunc); + #endif /* RVU_H */ diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c index 6cc8fbb7190c..fe99ac4a4dd8 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c @@ -126,6 +126,7 @@ static int rvu_map_cgx_lmac_pf(struct rvu *rvu) unsigned long lmac_bmap; int size, free_pkind; int cgx, lmac, iter; + int numvfs, hwvfs; if (!cgx_cnt_max) return 0; @@ -166,6 +167,8 @@ static int rvu_map_cgx_lmac_pf(struct rvu *rvu) pkind->pfchan_map[free_pkind] = ((pf) & 0x3F) << 16; rvu_map_cgx_nix_block(rvu, pf, cgx, lmac); rvu->cgx_mapped_pfs++; + rvu_get_pf_numvfs(rvu, pf, &numvfs, &hwvfs); + rvu->cgx_mapped_vfs += numvfs; pf++; } } diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c index 10a98bcb7c54..2688186066d9 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c @@ -1364,6 +1364,44 @@ static void rvu_health_reporters_destroy(struct rvu *rvu) rvu_nix_health_reporters_destroy(rvu_dl); } +static int rvu_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode) +{ + struct rvu_devlink *rvu_dl = devlink_priv(devlink); + struct rvu *rvu = rvu_dl->rvu; + struct rvu_switch *rswitch; + + rswitch = &rvu->rswitch; + *mode = rswitch->mode; + + return 0; +} + +static int rvu_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode, + struct netlink_ext_ack *extack) +{ + struct rvu_devlink *rvu_dl = devlink_priv(devlink); + struct rvu *rvu = rvu_dl->rvu; + struct rvu_switch *rswitch; + + rswitch = &rvu->rswitch; + switch (mode) { + case DEVLINK_ESWITCH_MODE_LEGACY: + case DEVLINK_ESWITCH_MODE_SWITCHDEV: + if (rswitch->mode == mode) + return 0; + rswitch->mode = mode; + if (mode == DEVLINK_ESWITCH_MODE_SWITCHDEV) + rvu_switch_enable(rvu); + else + rvu_switch_disable(rvu); + break; + default: + return -EINVAL; + } + + return 0; +} + static int rvu_devlink_info_get(struct devlink *devlink, struct devlink_info_req *req, struct netlink_ext_ack *extack) { @@ -1372,6 +1410,8 @@ static int rvu_devlink_info_get(struct devlink *devlink, struct devlink_info_req static const struct devlink_ops rvu_devlink_ops = { .info_get = rvu_devlink_info_get, + .eswitch_mode_get = rvu_devlink_eswitch_mode_get, + .eswitch_mode_set = rvu_devlink_eswitch_mode_set, }; int rvu_register_dl(struct rvu *rvu) @@ -1380,14 +1420,9 @@ int rvu_register_dl(struct rvu *rvu) struct devlink *dl; int err; - rvu_dl = kzalloc(sizeof(*rvu_dl), GFP_KERNEL); - if (!rvu_dl) - return -ENOMEM; - dl = devlink_alloc(&rvu_devlink_ops, sizeof(struct rvu_devlink)); if (!dl) { dev_warn(rvu->dev, "devlink_alloc failed\n"); - kfree(rvu_dl); return -ENOMEM; } @@ -1395,10 +1430,10 @@ int rvu_register_dl(struct rvu *rvu) if (err) { dev_err(rvu->dev, "devlink register failed with error %d\n", err); devlink_free(dl); - kfree(rvu_dl); return err; } + rvu_dl = devlink_priv(dl); rvu_dl->dl = dl; rvu_dl->rvu = rvu; rvu->rvu_dl = rvu_dl; @@ -1417,5 +1452,4 @@ void rvu_unregister_dl(struct rvu *rvu) rvu_health_reporters_destroy(rvu); devlink_unregister(dl); devlink_free(dl); - kfree(rvu_dl); } diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index a2d69eaac4f8..0933699a0d2d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -3212,6 +3212,8 @@ int rvu_mbox_handler_nix_set_mac_addr(struct rvu *rvu, if (test_bit(PF_SET_VF_TRUSTED, &pfvf->flags) && from_vf) ether_addr_copy(pfvf->default_mac, req->mac_addr); + rvu_switch_update_rules(rvu, pcifunc); + return 0; } @@ -3881,6 +3883,8 @@ int rvu_mbox_handler_nix_lf_start_rx(struct rvu *rvu, struct msg_req *req, pfvf = rvu_get_pfvf(rvu, pcifunc); set_bit(NIXLF_INITIALIZED, &pfvf->flags); + rvu_switch_update_rules(rvu, pcifunc); + return rvu_cgx_start_stop_io(rvu, pcifunc, true); } diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c index c1f35a0971ad..5c01cf4a9c5b 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c @@ -910,10 +910,15 @@ static void rvu_mcam_add_counter_to_rule(struct rvu *rvu, u16 pcifunc, static void npc_update_rx_entry(struct rvu *rvu, struct rvu_pfvf *pfvf, struct mcam_entry *entry, - struct npc_install_flow_req *req, u16 target) + struct npc_install_flow_req *req, + u16 target, bool pf_set_vfs_mac) { + struct rvu_switch *rswitch = &rvu->rswitch; struct nix_rx_action action; + if (rswitch->mode == DEVLINK_ESWITCH_MODE_SWITCHDEV && pf_set_vfs_mac) + req->chan_mask = 0x0; /* Do not care channel */ + npc_update_entry(rvu, NPC_CHAN, entry, req->channel, 0, req->chan_mask, 0, NIX_INTF_RX); @@ -1007,7 +1012,7 @@ static int npc_install_flow(struct rvu *rvu, int blkaddr, u16 target, req->intf); if (is_npc_intf_rx(req->intf)) - npc_update_rx_entry(rvu, pfvf, entry, req, target); + npc_update_rx_entry(rvu, pfvf, entry, req, target, pf_set_vfs_mac); else npc_update_tx_entry(rvu, pfvf, entry, req, target); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_switch.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_switch.c new file mode 100644 index 000000000000..2e5379710aa5 --- /dev/null +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_switch.c @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Marvell OcteonTx2 RVU Admin Function driver + * + * Copyright (C) 2021 Marvell. + */ + +#include +#include "rvu.h" + +static int rvu_switch_install_rx_rule(struct rvu *rvu, u16 pcifunc, + u16 chan_mask) +{ + struct npc_install_flow_req req = { 0 }; + struct npc_install_flow_rsp rsp = { 0 }; + struct rvu_pfvf *pfvf; + + pfvf = rvu_get_pfvf(rvu, pcifunc); + /* If the pcifunc is not initialized then nothing to do. + * This same function will be called again via rvu_switch_update_rules + * after pcifunc is initialized. + */ + if (!test_bit(NIXLF_INITIALIZED, &pfvf->flags)) + return 0; + + ether_addr_copy(req.packet.dmac, pfvf->mac_addr); + eth_broadcast_addr((u8 *)&req.mask.dmac); + req.hdr.pcifunc = 0; /* AF is requester */ + req.vf = pcifunc; + req.features = BIT_ULL(NPC_DMAC); + req.channel = pfvf->rx_chan_base; + req.chan_mask = chan_mask; + req.intf = pfvf->nix_rx_intf; + req.op = NIX_RX_ACTION_DEFAULT; + req.default_rule = 1; + + return rvu_mbox_handler_npc_install_flow(rvu, &req, &rsp); +} + +static int rvu_switch_install_tx_rule(struct rvu *rvu, u16 pcifunc, u16 entry) +{ + struct npc_install_flow_req req = { 0 }; + struct npc_install_flow_rsp rsp = { 0 }; + struct rvu_pfvf *pfvf; + u8 lbkid; + + pfvf = rvu_get_pfvf(rvu, pcifunc); + /* If the pcifunc is not initialized then nothing to do. + * This same function will be called again via rvu_switch_update_rules + * after pcifunc is initialized. + */ + if (!test_bit(NIXLF_INITIALIZED, &pfvf->flags)) + return 0; + + lbkid = pfvf->nix_blkaddr == BLKADDR_NIX0 ? 0 : 1; + ether_addr_copy(req.packet.dmac, pfvf->mac_addr); + eth_broadcast_addr((u8 *)&req.mask.dmac); + req.hdr.pcifunc = 0; /* AF is requester */ + req.vf = pcifunc; + req.entry = entry; + req.features = BIT_ULL(NPC_DMAC); + req.intf = pfvf->nix_tx_intf; + req.op = NIX_TX_ACTIONOP_UCAST_CHAN; + req.index = (lbkid << 8) | RVU_SWITCH_LBK_CHAN; + req.set_cntr = 1; + + return rvu_mbox_handler_npc_install_flow(rvu, &req, &rsp); +} + +static int rvu_switch_install_rules(struct rvu *rvu) +{ + struct rvu_switch *rswitch = &rvu->rswitch; + u16 start = rswitch->start_entry; + struct rvu_hwinfo *hw = rvu->hw; + int pf, vf, numvfs, hwvf; + u16 pcifunc, entry = 0; + int err; + + for (pf = 1; pf < hw->total_pfs; pf++) { + if (!is_pf_cgxmapped(rvu, pf)) + continue; + + pcifunc = pf << 10; + /* rvu_get_nix_blkaddr sets up the corresponding NIX block + * address and NIX RX and TX interfaces for a pcifunc. + * Generally it is called during attach call of a pcifunc but it + * is called here since we are pre-installing rules before + * nixlfs are attached + */ + rvu_get_nix_blkaddr(rvu, pcifunc); + + /* MCAM RX rule for a PF/VF already exists as default unicast + * rules installed by AF. Hence change the channel in those + * rules to ignore channel so that packets with the required + * DMAC received from LBK(by other PF/VFs in system) or from + * external world (from wire) are accepted. + */ + err = rvu_switch_install_rx_rule(rvu, pcifunc, 0x0); + if (err) { + dev_err(rvu->dev, "RX rule for PF%d failed(%d)\n", + pf, err); + return err; + } + + err = rvu_switch_install_tx_rule(rvu, pcifunc, start + entry); + if (err) { + dev_err(rvu->dev, "TX rule for PF%d failed(%d)\n", + pf, err); + return err; + } + + rswitch->entry2pcifunc[entry++] = pcifunc; + + rvu_get_pf_numvfs(rvu, pf, &numvfs, &hwvf); + for (vf = 0; vf < numvfs; vf++, hwvf++) { + pcifunc = pf << 10 | ((vf + 1) & 0x3FF); + rvu_get_nix_blkaddr(rvu, pcifunc); + + err = rvu_switch_install_rx_rule(rvu, pcifunc, 0x0); + if (err) { + dev_err(rvu->dev, + "RX rule for PF%dVF%d failed(%d)\n", + pf, vf, err); + return err; + } + + err = rvu_switch_install_tx_rule(rvu, pcifunc, + start + entry); + if (err) { + dev_err(rvu->dev, + "TX rule for PF%dVF%d failed(%d)\n", + pf, vf, err); + return err; + } + + rswitch->entry2pcifunc[entry++] = pcifunc; + } + } + + return 0; +} + +void rvu_switch_enable(struct rvu *rvu) +{ + struct npc_mcam_alloc_entry_req alloc_req = { 0 }; + struct npc_mcam_alloc_entry_rsp alloc_rsp = { 0 }; + struct npc_delete_flow_req uninstall_req = { 0 }; + struct npc_mcam_free_entry_req free_req = { 0 }; + struct rvu_switch *rswitch = &rvu->rswitch; + struct msg_rsp rsp; + int ret; + + alloc_req.contig = true; + alloc_req.count = rvu->cgx_mapped_pfs + rvu->cgx_mapped_vfs; + ret = rvu_mbox_handler_npc_mcam_alloc_entry(rvu, &alloc_req, + &alloc_rsp); + if (ret) { + dev_err(rvu->dev, + "Unable to allocate MCAM entries\n"); + goto exit; + } + + if (alloc_rsp.count != alloc_req.count) { + dev_err(rvu->dev, + "Unable to allocate %d MCAM entries, got %d\n", + alloc_req.count, alloc_rsp.count); + goto free_entries; + } + + rswitch->entry2pcifunc = kcalloc(alloc_req.count, sizeof(u16), + GFP_KERNEL); + if (!rswitch->entry2pcifunc) + goto free_entries; + + rswitch->used_entries = alloc_rsp.count; + rswitch->start_entry = alloc_rsp.entry; + + ret = rvu_switch_install_rules(rvu); + if (ret) + goto uninstall_rules; + + return; + +uninstall_rules: + uninstall_req.start = rswitch->start_entry; + uninstall_req.end = rswitch->start_entry + rswitch->used_entries - 1; + rvu_mbox_handler_npc_delete_flow(rvu, &uninstall_req, &rsp); + kfree(rswitch->entry2pcifunc); +free_entries: + free_req.all = 1; + rvu_mbox_handler_npc_mcam_free_entry(rvu, &free_req, &rsp); +exit: + return; +} + +void rvu_switch_disable(struct rvu *rvu) +{ + struct npc_delete_flow_req uninstall_req = { 0 }; + struct npc_mcam_free_entry_req free_req = { 0 }; + struct rvu_switch *rswitch = &rvu->rswitch; + struct rvu_hwinfo *hw = rvu->hw; + int pf, vf, numvfs, hwvf; + struct msg_rsp rsp; + u16 pcifunc; + int err; + + if (!rswitch->used_entries) + return; + + for (pf = 1; pf < hw->total_pfs; pf++) { + if (!is_pf_cgxmapped(rvu, pf)) + continue; + + pcifunc = pf << 10; + err = rvu_switch_install_rx_rule(rvu, pcifunc, 0xFFF); + if (err) + dev_err(rvu->dev, + "Reverting RX rule for PF%d failed(%d)\n", + pf, err); + + for (vf = 0; vf < numvfs; vf++, hwvf++) { + pcifunc = pf << 10 | ((vf + 1) & 0x3FF); + err = rvu_switch_install_rx_rule(rvu, pcifunc, 0xFFF); + if (err) + dev_err(rvu->dev, + "Reverting RX rule for PF%dVF%d failed(%d)\n", + pf, vf, err); + } + } + + uninstall_req.start = rswitch->start_entry; + uninstall_req.end = rswitch->start_entry + rswitch->used_entries - 1; + free_req.all = 1; + rvu_mbox_handler_npc_delete_flow(rvu, &uninstall_req, &rsp); + rvu_mbox_handler_npc_mcam_free_entry(rvu, &free_req, &rsp); + rswitch->used_entries = 0; + kfree(rswitch->entry2pcifunc); +} + +void rvu_switch_update_rules(struct rvu *rvu, u16 pcifunc) +{ + struct rvu_switch *rswitch = &rvu->rswitch; + u32 max = rswitch->used_entries; + u16 entry; + + if (!rswitch->used_entries) + return; + + for (entry = 0; entry < max; entry++) { + if (rswitch->entry2pcifunc[entry] == pcifunc) + break; + } + + if (entry >= max) + return; + + rvu_switch_install_tx_rule(rvu, pcifunc, rswitch->start_entry + entry); + rvu_switch_install_rx_rule(rvu, pcifunc, 0x0); +} -- cgit v1.2.3-58-ga151 From 8d4abca95ecc82fc8c41912fa0085281f19cc29f Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 19 Apr 2021 18:43:32 -0500 Subject: media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Fixes: dae52d009fc9 ("V4L/DVB: ngene: Initial check-in") Cc: stable@vger.kernel.org Reported-by: kernel test robot Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/linux-hardening/20210420001631.GA45456@embeddedor/ --- drivers/media/pci/ngene/ngene-core.c | 2 +- drivers/media/pci/ngene/ngene.h | 14 ++++++++------ 2 files changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/media/pci/ngene/ngene-core.c b/drivers/media/pci/ngene/ngene-core.c index 07f342db6701..7481f553f959 100644 --- a/drivers/media/pci/ngene/ngene-core.c +++ b/drivers/media/pci/ngene/ngene-core.c @@ -385,7 +385,7 @@ static int ngene_command_config_free_buf(struct ngene *dev, u8 *config) com.cmd.hdr.Opcode = CMD_CONFIGURE_FREE_BUFFER; com.cmd.hdr.Length = 6; - memcpy(&com.cmd.ConfigureBuffers.config, config, 6); + memcpy(&com.cmd.ConfigureFreeBuffers.config, config, 6); com.in_len = 6; com.out_len = 0; diff --git a/drivers/media/pci/ngene/ngene.h b/drivers/media/pci/ngene/ngene.h index 84f04e0e0cb9..3d296f1998a1 100644 --- a/drivers/media/pci/ngene/ngene.h +++ b/drivers/media/pci/ngene/ngene.h @@ -407,12 +407,14 @@ enum _BUFFER_CONFIGS { struct FW_CONFIGURE_FREE_BUFFERS { struct FW_HEADER hdr; - u8 UVI1_BufferLength; - u8 UVI2_BufferLength; - u8 TVO_BufferLength; - u8 AUD1_BufferLength; - u8 AUD2_BufferLength; - u8 TVA_BufferLength; + struct { + u8 UVI1_BufferLength; + u8 UVI2_BufferLength; + u8 TVO_BufferLength; + u8 AUD1_BufferLength; + u8 AUD2_BufferLength; + u8 TVA_BufferLength; + } __packed config; } __attribute__ ((__packed__)); struct FW_CONFIGURE_UART { -- cgit v1.2.3-58-ga151 From fae21608c31ca987d9dfc0422ac9b5bd21c213a6 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Mon, 5 Jul 2021 20:29:50 +0530 Subject: scsi: mpt3sas: Transition IOC to Ready state during shutdown The IOC firmware assumes that the host driver is still alive after shutdown and continues to post events to host memory (due to faulty expander phy links, etc). This leads to 0x2666 (a bus fault occurred during a host-IOC memory access). Perform an IOC soft reset as part of shutdown to disable event posting. Link: https://lore.kernel.org/r/20210705145951.32258-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 32 ++++++++++++++++---------------- drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 7 ++++++- 3 files changed, 26 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index c39955239d1c..19b1c0cf5f2a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2983,13 +2983,13 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) } /** - * _base_free_irq - free irq + * mpt3sas_base_free_irq - free irq * @ioc: per adapter object * * Freeing respective reply_queue from the list. */ -static void -_base_free_irq(struct MPT3SAS_ADAPTER *ioc) +void +mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc) { struct adapter_reply_queue *reply_q, *next; @@ -3191,12 +3191,12 @@ _base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc, } /** - * _base_disable_msix - disables msix + * mpt3sas_base_disable_msix - disables msix * @ioc: per adapter object * */ -static void -_base_disable_msix(struct MPT3SAS_ADAPTER *ioc) +void +mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc) { if (!ioc->msix_enable) return; @@ -3304,8 +3304,8 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) for (i = 0; i < ioc->reply_queue_count; i++) { r = _base_request_irq(ioc, i); if (r) { - _base_free_irq(ioc); - _base_disable_msix(ioc); + mpt3sas_base_free_irq(ioc); + mpt3sas_base_disable_msix(ioc); goto try_ioapic; } } @@ -3342,8 +3342,8 @@ mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc) dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); - _base_free_irq(ioc); - _base_disable_msix(ioc); + mpt3sas_base_free_irq(ioc); + mpt3sas_base_disable_msix(ioc); kfree(ioc->replyPostRegisterIndex); ioc->replyPostRegisterIndex = NULL; @@ -7613,14 +7613,14 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) } /** - * _base_make_ioc_ready - put controller in READY state + * mpt3sas_base_make_ioc_ready - put controller in READY state * @ioc: per adapter object * @type: FORCE_BIG_HAMMER or SOFT_RESET * * Return: 0 for success, non-zero for failure. */ -static int -_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type) +int +mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type) { u32 ioc_state; int rc; @@ -7897,7 +7897,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) if (ioc->chip_phys && ioc->chip) { mpt3sas_base_mask_interrupts(ioc); ioc->shost_recovery = 1; - _base_make_ioc_ready(ioc, SOFT_RESET); + mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET); ioc->shost_recovery = 0; } @@ -8017,7 +8017,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->build_sg_mpi = &_base_build_sg; ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge; - r = _base_make_ioc_ready(ioc, SOFT_RESET); + r = mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET); if (r) goto out_free_resources; @@ -8471,7 +8471,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, _base_pre_reset_handler(ioc); mpt3sas_wait_for_commands_to_complete(ioc); mpt3sas_base_mask_interrupts(ioc); - r = _base_make_ioc_ready(ioc, type); + r = mpt3sas_base_make_ioc_ready(ioc, type); if (r) goto out; _base_clear_outstanding_commands(ioc); diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index d4834c8ee9c0..0c6c3df0038d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1730,6 +1730,10 @@ do { ioc_err(ioc, "In func: %s\n", __func__); \ status, mpi_request, sz); } while (0) int mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int wait_count); +int +mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type); +void mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc); /* scsih shared API */ struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 866d118f7931..8e64a6f14542 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -11295,7 +11295,12 @@ scsih_shutdown(struct pci_dev *pdev) _scsih_ir_shutdown(ioc); _scsih_nvme_shutdown(ioc); - mpt3sas_base_detach(ioc); + mpt3sas_base_mask_interrupts(ioc); + ioc->shost_recovery = 1; + mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET); + ioc->shost_recovery = 0; + mpt3sas_base_free_irq(ioc); + mpt3sas_base_disable_msix(ioc); } -- cgit v1.2.3-58-ga151 From e9db418d4b828dd049caaf5ed65dc86f93bb1a0c Mon Sep 17 00:00:00 2001 From: Ian Ray Date: Mon, 19 Jul 2021 18:43:49 +0200 Subject: USB: serial: cp210x: fix comments for GE CS1000 Fix comments for GE CS1000 CP210x USB ID assignments. Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs") Signed-off-by: Ian Ray Signed-off-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 09b845d0da41..af286240807e 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -202,8 +202,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */ { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */ { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */ - { USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 Display serial interface */ - { USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 M.2 Key E serial interface */ + { USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 M.2 Key E serial interface */ + { USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 Display serial interface */ { USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ -- cgit v1.2.3-58-ga151 From 47e1e233e9d822dfda068383fb9a616451bda703 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 20 Jul 2021 09:28:09 +0200 Subject: efi/mokvar: Reserve the table only if it is in boot services data One of the SUSE QA tests triggered: localhost kernel: efi: Failed to lookup EFI memory descriptor for 0x000000003dcf8000 which comes from x86's version of efi_arch_mem_reserve() trying to reserve a memory region. Usually, that function expects EFI_BOOT_SERVICES_DATA memory descriptors but the above case is for the MOKvar table which is allocated in the EFI shim as runtime services. That lead to a fix changing the allocation of that table to boot services. However, that fix broke booting SEV guests with that shim leading to this kernel fix 8d651ee9c71b ("x86/ioremap: Map EFI-reserved memory as encrypted for SEV") which extended the ioremap hint to map reserved EFI boot services as decrypted too. However, all that wasn't needed, IMO, because that error message in efi_arch_mem_reserve() was innocuous in this case - if the MOKvar table is not in boot services, then it doesn't need to be reserved in the first place because it is, well, in runtime services which *should* be reserved anyway. So do that reservation for the MOKvar table only if it is allocated in boot services data. I couldn't find any requirement about where that table should be allocated in, unlike the ESRT which allocation is mandated to be done in boot services data by the UEFI spec. Signed-off-by: Borislav Petkov Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/mokvar-table.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/mokvar-table.c b/drivers/firmware/efi/mokvar-table.c index d8bc01340686..38722d2009e2 100644 --- a/drivers/firmware/efi/mokvar-table.c +++ b/drivers/firmware/efi/mokvar-table.c @@ -180,7 +180,10 @@ void __init efi_mokvar_table_init(void) pr_err("EFI MOKvar config table is not valid\n"); return; } - efi_mem_reserve(efi.mokvar_table, map_size_needed); + + if (md.type == EFI_BOOT_SERVICES_DATA) + efi_mem_reserve(efi.mokvar_table, map_size_needed); + efi_mokvar_table_size = map_size_needed; } -- cgit v1.2.3-58-ga151 From 1b713d14dc3c077ec45e65dab4ea01a8bc41b8c1 Mon Sep 17 00:00:00 2001 From: Chengwen Feng Date: Mon, 19 Jul 2021 17:13:05 +0800 Subject: net: hns3: fix possible mismatches resp of mailbox Currently, the mailbox synchronous communication between VF and PF use the following fields to maintain communication: 1. Origin_mbx_msg which was combined by message code and subcode, used to match request and response. 2. Received_resp which means whether received response. There may possible mismatches of the following situation: 1. VF sends message A with code=1 subcode=1. 2. PF was blocked about 500ms when processing the message A. 3. VF will detect message A timeout because it can't get the response within 500ms. 4. VF sends message B with code=1 subcode=1 which equal message A. 5. PF processes the first message A and send the response message to VF. 6. VF will identify the response matched the message B because the code/subcode is the same. This will lead to mismatch of request and response. To fix the above bug, we use the following scheme: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. As for PF driver, it only needs to copy the match_id from request to response. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Chengwen Feng Signed-off-by: Guangbin Huang Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 6 ++++-- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h index 0a6cda309b24..56b573e47072 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h +++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h @@ -143,7 +143,8 @@ struct hclge_mbx_vf_to_pf_cmd { u8 mbx_need_resp; u8 rsv1[1]; u8 msg_len; - u8 rsv2[3]; + u8 rsv2; + u16 match_id; struct hclge_vf_to_pf_msg msg; }; @@ -153,7 +154,8 @@ struct hclge_mbx_pf_to_vf_cmd { u8 dest_vfid; u8 rsv[3]; u8 msg_len; - u8 rsv1[3]; + u8 rsv1; + u16 match_id; struct hclge_pf_to_vf_msg msg; }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index e10a2c36b706..c0a478ae9583 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -47,6 +47,7 @@ static int hclge_gen_resp_to_vf(struct hclge_vport *vport, resp_pf_to_vf->dest_vfid = vf_to_pf_req->mbx_src_vfid; resp_pf_to_vf->msg_len = vf_to_pf_req->msg_len; + resp_pf_to_vf->match_id = vf_to_pf_req->match_id; resp_pf_to_vf->msg.code = HCLGE_MBX_PF_VF_RESP; resp_pf_to_vf->msg.vf_mbx_msg_code = vf_to_pf_req->msg.code; -- cgit v1.2.3-58-ga151 From 4671042f1ef0d37137884811afcc4ae67685ce07 Mon Sep 17 00:00:00 2001 From: Peng Li Date: Mon, 19 Jul 2021 17:13:06 +0800 Subject: net: hns3: add match_id to check mailbox response from PF to VF When VF need response from PF, VF will wait (1us - 1s) to receive the response, or it will wait timeout and the VF action fails. If VF do not receive response in 1st action because timeout, the 2nd action may receive response for the 1st action, and get incorrect response data.VF must reciveve the right response from PF,or it will cause unexpected error. This patch adds match_id to check mailbox response from PF to VF, to make sure VF get the right response: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. This scheme depends on PF driver supports match_id, if PF driver doesn't support then VF will uses the original scheme. Signed-off-by: Peng Li Signed-off-by: Guangbin Huang Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 1 + .../net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h index 56b573e47072..aa86a81c8f4a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h +++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h @@ -98,6 +98,7 @@ struct hclgevf_mbx_resp_status { u32 origin_mbx_msg; bool received_resp; int resp_status; + u16 match_id; u8 additional_info[HCLGE_MBX_MAX_RESP_DATA_SIZE]; }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c index 9b17735b9f4c..772b2f8acd2e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c @@ -13,6 +13,7 @@ static int hclgevf_resp_to_errno(u16 resp_code) return resp_code ? -resp_code : 0; } +#define HCLGEVF_MBX_MATCH_ID_START 1 static void hclgevf_reset_mbx_resp_status(struct hclgevf_dev *hdev) { /* this function should be called with mbx_resp.mbx_mutex held @@ -21,6 +22,10 @@ static void hclgevf_reset_mbx_resp_status(struct hclgevf_dev *hdev) hdev->mbx_resp.received_resp = false; hdev->mbx_resp.origin_mbx_msg = 0; hdev->mbx_resp.resp_status = 0; + hdev->mbx_resp.match_id++; + /* Update match_id and ensure the value of match_id is not zero */ + if (hdev->mbx_resp.match_id == 0) + hdev->mbx_resp.match_id = HCLGEVF_MBX_MATCH_ID_START; memset(hdev->mbx_resp.additional_info, 0, HCLGE_MBX_MAX_RESP_DATA_SIZE); } @@ -115,6 +120,7 @@ int hclgevf_send_mbx_msg(struct hclgevf_dev *hdev, if (need_resp) { mutex_lock(&hdev->mbx_resp.mbx_mutex); hclgevf_reset_mbx_resp_status(hdev); + req->match_id = hdev->mbx_resp.match_id; status = hclgevf_cmd_send(&hdev->hw, &desc, 1); if (status) { dev_err(&hdev->pdev->dev, @@ -211,6 +217,19 @@ void hclgevf_mbx_handler(struct hclgevf_dev *hdev) resp->additional_info[i] = *temp; temp++; } + + /* If match_id is not zero, it means PF support + * match_id. If the match_id is right, VF get the + * right response, otherwise ignore the response. + * Driver will clear hdev->mbx_resp when send + * next message which need response. + */ + if (req->match_id) { + if (req->match_id == resp->match_id) + resp->received_resp = true; + } else { + resp->received_resp = true; + } break; case HCLGE_MBX_LINK_STAT_CHANGE: case HCLGE_MBX_ASSERTING_RESET: -- cgit v1.2.3-58-ga151 From 184cd221a86321e53df9389c4b35a247b60c1e77 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Mon, 19 Jul 2021 17:13:07 +0800 Subject: net: hns3: disable port VLAN filter when support function level VLAN filter control For hardware limitation, port VLAN filter is port level, and effective for all the functions of the port. So if not support port VLAN bypass, it's necessary to disable the port VLAN filter, in order to support function level VLAN filter control. Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index dd3354a57c62..ebeaf12e409b 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -9552,13 +9552,17 @@ static int hclge_set_vport_vlan_filter(struct hclge_vport *vport, bool enable) if (ret) return ret; - if (test_bit(HNAE3_DEV_SUPPORT_PORT_VLAN_BYPASS_B, ae_dev->caps)) + if (test_bit(HNAE3_DEV_SUPPORT_PORT_VLAN_BYPASS_B, ae_dev->caps)) { ret = hclge_set_port_vlan_filter_bypass(hdev, vport->vport_id, !enable); - else if (!vport->vport_id) + } else if (!vport->vport_id) { + if (test_bit(HNAE3_DEV_SUPPORT_VLAN_FLTR_MDF_B, ae_dev->caps)) + enable = false; + ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT, HCLGE_FILTER_FE_INGRESS, enable, 0); + } return ret; } -- cgit v1.2.3-58-ga151 From bbfd4506f962e7e6fff8f37f017154a3c3791264 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Mon, 19 Jul 2021 17:13:08 +0800 Subject: net: hns3: fix rx VLAN offload state inconsistent issue Currently, VF doesn't enable rx VLAN offload when initializating, and PF does it for VFs. If user disable the rx VLAN offload for VF with ethtool -K, and reload the VF driver, it may cause the rx VLAN offload state being inconsistent between hardware and software. Fixes it by enabling rx VLAN offload when VF initializing. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 52eaf82b7cd7..8784d61e833f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2641,6 +2641,16 @@ static int hclgevf_rss_init_hw(struct hclgevf_dev *hdev) static int hclgevf_init_vlan_config(struct hclgevf_dev *hdev) { + struct hnae3_handle *nic = &hdev->nic; + int ret; + + ret = hclgevf_en_hw_strip_rxvtag(nic, true); + if (ret) { + dev_err(&hdev->pdev->dev, + "failed to enable rx vlan offload, ret = %d\n", ret); + return ret; + } + return hclgevf_set_vlan_filter(&hdev->nic, htons(ETH_P_8021Q), 0, false); } -- cgit v1.2.3-58-ga151 From c45c1e82bba130db4f19d9dbc1deefcf4ea994ed Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Sat, 17 Jul 2021 00:02:45 +0300 Subject: spi: spi-bcm2835: Fix deadlock The bcm2835_spi_transfer_one function can create a deadlock if it is called while another thread already has the CCF lock. Signed-off-by: Alexandru Tachici Fixes: f8043872e796 ("spi: add driver for BCM2835") Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 5f8771fe1a31..775c0bf2f923 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -83,6 +83,7 @@ MODULE_PARM_DESC(polling_limit_us, * struct bcm2835_spi - BCM2835 SPI controller * @regs: base address of register map * @clk: core clock, divided to calculate serial clock + * @clk_hz: core clock cached speed * @irq: interrupt, signals TX FIFO empty or RX FIFO ¾ full * @tfr: SPI transfer currently processed * @ctlr: SPI controller reverse lookup @@ -116,6 +117,7 @@ MODULE_PARM_DESC(polling_limit_us, struct bcm2835_spi { void __iomem *regs; struct clk *clk; + unsigned long clk_hz; int irq; struct spi_transfer *tfr; struct spi_controller *ctlr; @@ -1045,19 +1047,18 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, { struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); struct bcm2835_spidev *slv = spi_get_ctldata(spi); - unsigned long spi_hz, clk_hz, cdiv; + unsigned long spi_hz, cdiv; unsigned long hz_per_byte, byte_limit; u32 cs = slv->prepare_cs; /* set clock */ spi_hz = tfr->speed_hz; - clk_hz = clk_get_rate(bs->clk); - if (spi_hz >= clk_hz / 2) { + if (spi_hz >= bs->clk_hz / 2) { cdiv = 2; /* clk_hz/2 is the fastest we can go */ } else if (spi_hz) { /* CDIV must be a multiple of two */ - cdiv = DIV_ROUND_UP(clk_hz, spi_hz); + cdiv = DIV_ROUND_UP(bs->clk_hz, spi_hz); cdiv += (cdiv % 2); if (cdiv >= 65536) @@ -1065,7 +1066,7 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, } else { cdiv = 0; /* 0 is the slowest we can go */ } - tfr->effective_speed_hz = cdiv ? (clk_hz / cdiv) : (clk_hz / 65536); + tfr->effective_speed_hz = cdiv ? (bs->clk_hz / cdiv) : (bs->clk_hz / 65536); bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv); /* handle all the 3-wire mode */ @@ -1354,6 +1355,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) return bs->irq ? bs->irq : -ENODEV; clk_prepare_enable(bs->clk); + bs->clk_hz = clk_get_rate(bs->clk); err = bcm2835_dma_init(ctlr, &pdev->dev, bs); if (err) -- cgit v1.2.3-58-ga151 From 7e777021780e9c373fc0c04d40b8407ce8c3b5d5 Mon Sep 17 00:00:00 2001 From: Eric Woudstra Date: Mon, 19 Jul 2021 20:23:57 +0200 Subject: mt7530 mt7530_fdb_write only set ivl bit vid larger than 1 Fixes my earlier patch which broke vlan unaware bridges. The IVL bit now only gets set for vid's larger than 1. Fixes: 11d8d98cbeef ("mt7530 fix mt7530_fdb_write vid missing ivl bit") Signed-off-by: Eric Woudstra Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 9e4df35f92cc..69f21b71614c 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -366,7 +366,8 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, int i; reg[1] |= vid & CVID_MASK; - reg[1] |= ATA2_IVL; + if (vid > 1) + reg[1] |= ATA2_IVL; reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER; reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP; /* STATIC_ENT indicate that entry is static wouldn't -- cgit v1.2.3-58-ga151 From 75d5641497a60bb5d36ff77fd3f526906cbc148c Mon Sep 17 00:00:00 2001 From: Maxim Kochetkov Date: Tue, 20 Jul 2021 08:08:38 +0300 Subject: fsl/fman: Add fibre support Set SUPPORTED_FIBRE to mac_dev->if_support. It allows proper usage of PHYs with optical/fiber support. Signed-off-by: Maxim Kochetkov Acked-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fman/mac.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c index 46ecb42f2ef8..d9fc5c456bf3 100644 --- a/drivers/net/ethernet/freescale/fman/mac.c +++ b/drivers/net/ethernet/freescale/fman/mac.c @@ -524,6 +524,7 @@ static void setup_memac(struct mac_device *mac_dev) | SUPPORTED_Autoneg \ | SUPPORTED_Pause \ | SUPPORTED_Asym_Pause \ + | SUPPORTED_FIBRE \ | SUPPORTED_MII) static DEFINE_MUTEX(eth_lock); -- cgit v1.2.3-58-ga151 From 91bed5565bba03b2a9f7334b58ae4be9df7c3840 Mon Sep 17 00:00:00 2001 From: Jia He Date: Tue, 20 Jul 2021 21:26:55 +0800 Subject: Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()" This reverts commit 6206b7981a36476f4695d661ae139f7db36a802d. That patch added additional spin_{un}lock_bh(), which was harmless but pointless. The orginal code path has guaranteed the pair of spin_{un}lock_bh(). We'd better revert it before we find the exact root cause of the bug_on mentioned in that patch. Fixes: 6206b7981a36 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()") Cc: David S. Miller Cc: Prabhakar Kushwaha Signed-off-by: Jia He Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 79d879a5d663..4387292c37e2 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -474,18 +474,14 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); - if (!qed_mcp_has_pending_cmd(p_hwfn)) { - spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); + if (!qed_mcp_has_pending_cmd(p_hwfn)) break; - } rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt); - if (!rc) { - spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); + if (!rc) break; - } else if (rc != -EAGAIN) { + else if (rc != -EAGAIN) goto err; - } spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); @@ -502,8 +498,6 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, return -EAGAIN; } - spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); - /* Send the mailbox command */ qed_mcp_reread_offsets(p_hwfn, p_ptt); seq_num = ++p_hwfn->mcp_info->drv_mb_seq; @@ -530,18 +524,14 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); - if (p_cmd_elem->b_is_completed) { - spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); + if (p_cmd_elem->b_is_completed) break; - } rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt); - if (!rc) { - spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); + if (!rc) break; - } else if (rc != -EAGAIN) { + else if (rc != -EAGAIN) goto err; - } spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); } while (++cnt < max_retries); @@ -564,7 +554,6 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, return -EAGAIN; } - spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); qed_mcp_cmd_del_elem(p_hwfn, p_cmd_elem); spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); -- cgit v1.2.3-58-ga151 From 8798d070d416d18a75770fc19787e96705073f43 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sat, 3 Jul 2021 11:56:55 +0200 Subject: rbd: always kick acquire on "acquired" and "released" notifications Skipping the "lock has been released" notification if the lock owner is not what we expect based on owner_cid can lead to I/O hangs. One example is our own notifications: because owner_cid is cleared in rbd_unlock(), when we get our own notification it is processed as unexpected/duplicate and maybe_kick_acquire() isn't called. If a peer that requested the lock then doesn't go through with acquiring it, I/O requests that came in while the lock was being quiesced would be stalled until another I/O request is submitted and kicks acquire from rbd_img_exclusive_lock(). This makes the comment in rbd_release_lock() actually true: prior to this change the canceled work was being requeued in response to the "lock has been acquired" notification from rbd_handle_acquired_lock(). Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Ilya Dryomov Tested-by: Robin Geuze --- drivers/block/rbd.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 531d390902dd..e77cea6a6189 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4203,15 +4203,11 @@ static void rbd_handle_acquired_lock(struct rbd_device *rbd_dev, u8 struct_v, if (!rbd_cid_equal(&cid, &rbd_empty_cid)) { down_write(&rbd_dev->lock_rwsem); if (rbd_cid_equal(&cid, &rbd_dev->owner_cid)) { - /* - * we already know that the remote client is - * the owner - */ - up_write(&rbd_dev->lock_rwsem); - return; + dout("%s rbd_dev %p cid %llu-%llu == owner_cid\n", + __func__, rbd_dev, cid.gid, cid.handle); + } else { + rbd_set_owner_cid(rbd_dev, &cid); } - - rbd_set_owner_cid(rbd_dev, &cid); downgrade_write(&rbd_dev->lock_rwsem); } else { down_read(&rbd_dev->lock_rwsem); @@ -4236,14 +4232,12 @@ static void rbd_handle_released_lock(struct rbd_device *rbd_dev, u8 struct_v, if (!rbd_cid_equal(&cid, &rbd_empty_cid)) { down_write(&rbd_dev->lock_rwsem); if (!rbd_cid_equal(&cid, &rbd_dev->owner_cid)) { - dout("%s rbd_dev %p unexpected owner, cid %llu-%llu != owner_cid %llu-%llu\n", + dout("%s rbd_dev %p cid %llu-%llu != owner_cid %llu-%llu\n", __func__, rbd_dev, cid.gid, cid.handle, rbd_dev->owner_cid.gid, rbd_dev->owner_cid.handle); - up_write(&rbd_dev->lock_rwsem); - return; + } else { + rbd_set_owner_cid(rbd_dev, &rbd_empty_cid); } - - rbd_set_owner_cid(rbd_dev, &rbd_empty_cid); downgrade_write(&rbd_dev->lock_rwsem); } else { down_read(&rbd_dev->lock_rwsem); -- cgit v1.2.3-58-ga151 From ed9eb71085ecb7ded9a5118cec2ab70667cc7350 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sat, 3 Jul 2021 11:31:26 +0200 Subject: rbd: don't hold lock_rwsem while running_list is being drained Currently rbd_quiesce_lock() holds lock_rwsem for read while blocking on releasing_wait completion. On the I/O completion side, each image request also needs to take lock_rwsem for read. Because rw_semaphore implementation doesn't allow new readers after a writer has indicated interest in the lock, this can result in a deadlock if something that needs to take lock_rwsem for write gets involved. For example: 1. watch error occurs 2. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and releases lock_rwsem 3. after reestablishing the watch, rbd_reregister_watch() takes lock_rwsem for write and calls rbd_reacquire_lock() 4. rbd_quiesce_lock() downgrades lock_rwsem to for read and blocks on releasing_wait until running_list becomes empty 5. another watch error occurs 6. rbd_watch_errcb() blocks trying to take lock_rwsem for write 7. no in-flight image request can complete and delete itself from running_list because lock_rwsem won't be granted anymore A similar scenario can occur with "lock has been acquired" and "lock has been released" notification handers which also take lock_rwsem for write to update owner_cid. We don't actually get anything useful from sitting on lock_rwsem in rbd_quiesce_lock() -- owner_cid updates certainly don't need to be synchronized with. In fact the whole owner_cid tracking logic could probably be removed from the kernel client because we don't support proxied maintenance operations. Cc: stable@vger.kernel.org # 5.3+ URL: https://tracker.ceph.com/issues/42757 Signed-off-by: Ilya Dryomov Tested-by: Robin Geuze --- drivers/block/rbd.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index e77cea6a6189..784797fa9a53 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4100,8 +4100,6 @@ again: static bool rbd_quiesce_lock(struct rbd_device *rbd_dev) { - bool need_wait; - dout("%s rbd_dev %p\n", __func__, rbd_dev); lockdep_assert_held_write(&rbd_dev->lock_rwsem); @@ -4113,11 +4111,11 @@ static bool rbd_quiesce_lock(struct rbd_device *rbd_dev) */ rbd_dev->lock_state = RBD_LOCK_STATE_RELEASING; rbd_assert(!completion_done(&rbd_dev->releasing_wait)); - need_wait = !list_empty(&rbd_dev->running_list); - downgrade_write(&rbd_dev->lock_rwsem); - if (need_wait) - wait_for_completion(&rbd_dev->releasing_wait); - up_read(&rbd_dev->lock_rwsem); + if (list_empty(&rbd_dev->running_list)) + return true; + + up_write(&rbd_dev->lock_rwsem); + wait_for_completion(&rbd_dev->releasing_wait); down_write(&rbd_dev->lock_rwsem); if (rbd_dev->lock_state != RBD_LOCK_STATE_RELEASING) -- cgit v1.2.3-58-ga151 From 4a8ac5e45cdaa88884b4ce05303e304cbabeb367 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Fri, 16 Jul 2021 08:58:32 +1200 Subject: i2c: mpc: Poll for MCF During some transfers the bus can still be busy when an interrupt is received. Commit 763778cd7926 ("i2c: mpc: Restore reread of I2C status register") attempted to address this by re-reading MPC_I2C_SR once but that just made it less likely to happen without actually preventing it. Instead of a single re-read, poll with a timeout so that the bus is given enough time to settle but a genuine stuck SCL is still noticed. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Signed-off-by: Chris Packham Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mpc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 6d5014ebaab5..a6ea1eb1394e 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -635,8 +635,8 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) status = readb(i2c->base + MPC_I2C_SR); if (status & CSR_MIF) { - /* Read again to allow register to stabilise */ - status = readb(i2c->base + MPC_I2C_SR); + /* Wait up to 100us for transfer to properly complete */ + readb_poll_timeout(i2c->base + MPC_I2C_SR, status, !(status & CSR_MCF), 0, 100); writeb(0, i2c->base + MPC_I2C_SR); mpc_i2c_do_intr(i2c, status); return IRQ_HANDLED; -- cgit v1.2.3-58-ga151 From 09cfae9f13d51700b0fecf591dcd658fc5375428 Mon Sep 17 00:00:00 2001 From: Markus Boehme Date: Tue, 20 Jul 2021 16:26:19 -0700 Subject: ixgbe: Fix packet corruption due to missing DMA sync When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: stable@vger.kernel.org Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 913253f8ecb4..14aea40da50f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1825,7 +1825,8 @@ static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring, struct sk_buff *skb) { if (ring_uses_build_skb(rx_ring)) { - unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK; + unsigned long mask = (unsigned long)ixgbe_rx_pg_size(rx_ring) - 1; + unsigned long offset = (unsigned long)(skb->data) & mask; dma_sync_single_range_for_cpu(rx_ring->dev, IXGBE_CB(skb)->dma, -- cgit v1.2.3-58-ga151 From a47fa41381a09e5997afd762664db4f5f6657e03 Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Wed, 21 Jul 2021 00:55:22 +0200 Subject: scsi: target: Fix NULL dereference on XCOPY completion CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. Link: https://lore.kernel.org/r/20210720225522.26291-1-ddiss@suse.de Fixes: 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") Cc: Lee Duncan Cc: Mike Christie Reviewed-by: Mike Christie Signed-off-by: David Disseldorp Signed-off-by: Martin K. Petersen --- drivers/target/target_core_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 7e35eddd9eb7..26ceabe34de5 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -886,7 +886,7 @@ void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) INIT_WORK(&cmd->work, success ? target_complete_ok_work : target_complete_failure_work); - if (wwn->cmd_compl_affinity == SE_COMPL_AFFINITY_CPUID) + if (!wwn || wwn->cmd_compl_affinity == SE_COMPL_AFFINITY_CPUID) cpu = cmd->cpuid; else cpu = wwn->cmd_compl_affinity; -- cgit v1.2.3-58-ga151 From 44cf53602f5a0db80d53c8fff6cdbcae59650a42 Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Mon, 19 Jul 2021 00:05:19 -0700 Subject: Revert "usb: renesas-xhci: Fix handling of unknown ROM state" This reverts commit d143825baf15f204dac60acdf95e428182aa3374. Justin reports some of his systems now fail as result of this commit: xhci_hcd 0000:04:00.0: Direct firmware load for renesas_usb_fw.mem failed with error -2 xhci_hcd 0000:04:00.0: request_firmware failed: -2 xhci_hcd: probe of 0000:04:00.0 failed with error -2 The revert brings back the original issue the commit tried to solve but at least unbreaks existing systems relying on previous behavior. Cc: stable@vger.kernel.org Cc: Mathias Nyman Cc: Vinod Koul Cc: Justin Forbes Reported-by: Justin Forbes Signed-off-by: Moritz Fischer Fixes: d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") Link: https://lore.kernel.org/r/20210719070519.41114-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci-renesas.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci-renesas.c b/drivers/usb/host/xhci-pci-renesas.c index 1da647961c25..5923844ed821 100644 --- a/drivers/usb/host/xhci-pci-renesas.c +++ b/drivers/usb/host/xhci-pci-renesas.c @@ -207,8 +207,7 @@ static int renesas_check_rom_state(struct pci_dev *pdev) return 0; case RENESAS_ROM_STATUS_NO_RESULT: /* No result yet */ - dev_dbg(&pdev->dev, "Unknown ROM status ...\n"); - break; + return 0; case RENESAS_ROM_STATUS_ERROR: /* Error State */ default: /* All other states are marked as "Reserved states" */ @@ -225,12 +224,13 @@ static int renesas_fw_check_running(struct pci_dev *pdev) u8 fw_state; int err; - /* - * Only if device has ROM and loaded FW we can skip loading and - * return success. Otherwise (even unknown state), attempt to load FW. - */ - if (renesas_check_rom(pdev) && !renesas_check_rom_state(pdev)) - return 0; + /* Check if device has ROM and loaded, if so skip everything */ + err = renesas_check_rom(pdev); + if (err) { /* we have rom */ + err = renesas_check_rom_state(pdev); + if (!err) + return err; + } /* * Test if the device is actually needing the firmware. As most -- cgit v1.2.3-58-ga151 From 72f68bf5c756f5ce1139b31daae2684501383ad5 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 15 Jul 2021 18:06:51 +0300 Subject: xhci: Fix lost USB 2 remote wake There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index e9b18fc17617..151e93c4bd57 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1638,11 +1638,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) * Inform the usbcore about resume-in-progress by returning * a non-zero value even if there are no status changes. */ + spin_lock_irqsave(&xhci->lock, flags); + status = bus_state->resuming_ports; mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC; - spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < max_ports; i++) { temp = readl(ports[i]->addr); -- cgit v1.2.3-58-ga151 From 57560ee95cb7f91cf0bc31d4ae8276e0dcfe17aa Mon Sep 17 00:00:00 2001 From: Martin Kepplinger Date: Wed, 14 Jul 2021 08:18:07 +0200 Subject: usb: typec: tipd: Don't block probing of consumer of "connector" nodes Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable Acked-by: Heikki Krogerus Signed-off-by: Martin Kepplinger Link: https://lore.kernel.org/r/20210714061807.5737-1-martin.kepplinger@puri.sm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tipd/core.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 938219bc1b4b..21b3ae25c76d 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -629,6 +629,15 @@ static int tps6598x_probe(struct i2c_client *client) if (!fwnode) return -ENODEV; + /* + * This fwnode has a "compatible" property, but is never populated as a + * struct device. Instead we simply parse it to read the properties. + * This breaks fw_devlink=on. To maintain backward compatibility + * with existing DT files, we work around this by deleting any + * fwnode_links to/from this fwnode. + */ + fw_devlink_purge_absent_suppliers(fwnode); + tps->role_sw = fwnode_usb_role_switch_get(fwnode); if (IS_ERR(tps->role_sw)) { ret = PTR_ERR(tps->role_sw); -- cgit v1.2.3-58-ga151 From 1bf2761c837571a66ec290fb66c90413821ffda2 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 15 Jul 2021 18:01:21 +0300 Subject: usb: hub: Fix link power management max exit latency (MEL) calculations Maximum Exit Latency (MEL) value is used by host to know how much in advance it needs to start waking up a U1/U2 suspended link in order to service a periodic transfer in time. Current MEL calculation only includes the time to wake up the path from U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2 Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include: - tMEL2 which is the time it takes for PING message to reach device - tMEL3 time for device to process the PING and submit a PING_RESPONSE - tMEL4 time for PING_RESPONSE to traverse back upstream to host. Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation. Cc: # v3.5 Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 52 +++++++++++++++++++++++++++----------------------- 1 file changed, 28 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d1efc7141333..a35d0bedafa3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -48,6 +48,7 @@ #define USB_TP_TRANSMISSION_DELAY 40 /* ns */ #define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */ +#define USB_PING_RESPONSE_TIME 400 /* ns */ /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can @@ -182,8 +183,9 @@ int usb_device_supports_lpm(struct usb_device *udev) } /* - * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from - * either U1 or U2. + * Set the Maximum Exit Latency (MEL) for the host to wakup up the path from + * U1/U2, send a PING to the device and receive a PING_RESPONSE. + * See USB 3.1 section C.1.5.2 */ static void usb_set_lpm_mel(struct usb_device *udev, struct usb3_lpm_parameters *udev_lpm_params, @@ -193,35 +195,37 @@ static void usb_set_lpm_mel(struct usb_device *udev, unsigned int hub_exit_latency) { unsigned int total_mel; - unsigned int device_mel; - unsigned int hub_mel; /* - * Calculate the time it takes to transition all links from the roothub - * to the parent hub into U0. The parent hub must then decode the - * packet (hub header decode latency) to figure out which port it was - * bound for. - * - * The Hub Header decode latency is expressed in 0.1us intervals (0x1 - * means 0.1us). Multiply that by 100 to get nanoseconds. + * tMEL1. time to transition path from host to device into U0. + * MEL for parent already contains the delay up to parent, so only add + * the exit latency for the last link (pick the slower exit latency), + * and the hub header decode latency. See USB 3.1 section C 2.2.1 + * Store MEL in nanoseconds */ total_mel = hub_lpm_params->mel + - (hub->descriptor->u.ss.bHubHdrDecLat * 100); + max(udev_exit_latency, hub_exit_latency) * 1000 + + hub->descriptor->u.ss.bHubHdrDecLat * 100; /* - * How long will it take to transition the downstream hub's port into - * U0? The greater of either the hub exit latency or the device exit - * latency. - * - * The BOS U1/U2 exit latencies are expressed in 1us intervals. - * Multiply that by 1000 to get nanoseconds. + * tMEL2. Time to submit PING packet. Sum of tTPTransmissionDelay for + * each link + wHubDelay for each hub. Add only for last link. + * tMEL4, the time for PING_RESPONSE to traverse upstream is similar. + * Multiply by 2 to include it as well. */ - device_mel = udev_exit_latency * 1000; - hub_mel = hub_exit_latency * 1000; - if (device_mel > hub_mel) - total_mel += device_mel; - else - total_mel += hub_mel; + total_mel += (__le16_to_cpu(hub->descriptor->u.ss.wHubDelay) + + USB_TP_TRANSMISSION_DELAY) * 2; + + /* + * tMEL3, tPingResponse. Time taken by device to generate PING_RESPONSE + * after receiving PING. Also add 2100ns as stated in USB 3.1 C 1.5.2.4 + * to cover the delay if the PING_RESPONSE is queued behind a Max Packet + * Size DP. + * Note these delays should be added only once for the entire path, so + * add them to the MEL of the device connected to the roothub. + */ + if (!hub->hdev->parent) + total_mel += USB_PING_RESPONSE_TIME + 2100; udev_lpm_params->mel = total_mel; } -- cgit v1.2.3-58-ga151 From 1b7f56fbc7a1b66967b6114d1b5f5a257c3abae6 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 15 Jul 2021 18:01:22 +0300 Subject: usb: hub: Disable USB 3 device initiated lpm if exit latency is too high The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by: Mathias Nyman Cc: stable Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 68 +++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 56 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a35d0bedafa3..86658a81d284 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4116,6 +4116,47 @@ static int usb_set_lpm_timeout(struct usb_device *udev, return 0; } +/* + * Don't allow device intiated U1/U2 if the system exit latency + one bus + * interval is greater than the minimum service interval of any active + * periodic endpoint. See USB 3.2 section 9.4.9 + */ +static bool usb_device_may_initiate_lpm(struct usb_device *udev, + enum usb3_link_state state) +{ + unsigned int sel; /* us */ + int i, j; + + if (state == USB3_LPM_U1) + sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); + else if (state == USB3_LPM_U2) + sel = DIV_ROUND_UP(udev->u2_params.sel, 1000); + else + return false; + + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + struct usb_interface *intf; + struct usb_endpoint_descriptor *desc; + unsigned int interval; + + intf = udev->actconfig->interface[i]; + if (!intf) + continue; + + for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) { + desc = &intf->cur_altsetting->endpoint[j].desc; + + if (usb_endpoint_xfer_int(desc) || + usb_endpoint_xfer_isoc(desc)) { + interval = (1 << (desc->bInterval - 1)) * 125; + if (sel + 125 > interval) + return false; + } + } + } + return true; +} + /* * Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated * U1/U2 entry. @@ -4188,20 +4229,23 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, * U1/U2_ENABLE */ if (udev->actconfig && - usb_set_device_initiated_lpm(udev, state, true) == 0) { - if (state == USB3_LPM_U1) - udev->usb3_lpm_u1_enabled = 1; - else if (state == USB3_LPM_U2) - udev->usb3_lpm_u2_enabled = 1; - } else { - /* Don't request U1/U2 entry if the device - * cannot transition to U1/U2. - */ - usb_set_lpm_timeout(udev, state, 0); - hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); + usb_device_may_initiate_lpm(udev, state)) { + if (usb_set_device_initiated_lpm(udev, state, true)) { + /* + * Request to enable device initiated U1/U2 failed, + * better to turn off lpm in this case. + */ + usb_set_lpm_timeout(udev, state, 0); + hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); + return; + } } -} + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 1; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 1; +} /* * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated * U1/U2 entry. -- cgit v1.2.3-58-ga151 From 0b60557230adfdeb8164e0b342ac9cd469a75759 Mon Sep 17 00:00:00 2001 From: David Jeffery Date: Thu, 15 Jul 2021 17:37:44 -0400 Subject: usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI When MSI is used by the ehci-hcd driver, it can cause lost interrupts which results in EHCI only continuing to work due to a polling fallback. But the reliance of polling drastically reduces performance of any I/O through EHCI. Interrupts are lost as the EHCI interrupt handler does not safely handle edge-triggered interrupts. It fails to ensure all interrupt status bits are cleared, which works with level-triggered interrupts but not the edge-triggered interrupts typical from using MSI. To fix this problem, check if the driver may have raced with the hardware setting additional interrupt status bits and clear status until it is in a stable state. Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Tested-by: Laurence Oberman Reviewed-by: Andy Shevchenko Acked-by: Alan Stern Signed-off-by: David Jeffery Link: https://lore.kernel.org/r/20210715213744.GA44506@redhat Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 36f5bf6a0752..10b0365f3439 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -703,24 +703,28 @@ EXPORT_SYMBOL_GPL(ehci_setup); static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, masked_status, pcd_status = 0, cmd; + u32 status, current_status, masked_status, pcd_status = 0; + u32 cmd; int bh; spin_lock(&ehci->lock); - status = ehci_readl(ehci, &ehci->regs->status); + status = 0; + current_status = ehci_readl(ehci, &ehci->regs->status); +restart: /* e.g. cardbus physical eject */ - if (status == ~(u32) 0) { + if (current_status == ~(u32) 0) { ehci_dbg (ehci, "device removed\n"); goto dead; } + status |= current_status; /* * We don't use STS_FLR, but some controllers don't like it to * remain on, so mask it out along with the other status bits. */ - masked_status = status & (INTR_MASK | STS_FLR); + masked_status = current_status & (INTR_MASK | STS_FLR); /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { @@ -730,6 +734,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* clear (just) interrupts */ ehci_writel(ehci, masked_status, &ehci->regs->status); + + /* For edge interrupts, don't race with an interrupt bit being raised */ + current_status = ehci_readl(ehci, &ehci->regs->status); + if (current_status & INTR_MASK) + goto restart; + cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0; -- cgit v1.2.3-58-ga151 From 6abf2fe6b4bf6e5256b80c5817908151d2d33e9f Mon Sep 17 00:00:00 2001 From: Julian Sikorski Date: Tue, 20 Jul 2021 19:19:10 +0200 Subject: USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like: [ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN [ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00 [ 1151.588594] scsi host14: uas_eh_device_reset_handler start [ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1151.741398] scsi host14: uas_eh_device_reset_handler success [ 1181.785534] scsi host14: uas_eh_device_reset_handler start Signed-off-by: Julian Sikorski Cc: stable Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index f9677a5ec31b..c35a6db993f1 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -45,6 +45,13 @@ UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME), +/* Reported-by: Julian Sikorski */ +UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999, + "LaCie", + "Rugged USB3-FW", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI * commands in UAS mode. Observed with the 1.28 firmware; are there others? -- cgit v1.2.3-58-ga151 From 86762ad4abcc549deb7a155c8e5e961b9755bcf0 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Fri, 16 Jul 2021 14:07:17 +0200 Subject: usb: typec: stusb160x: register role switch before interrupt registration During interrupt registration, attach state is checked. If attached, then the Type-C state is updated with typec_set_xxx functions and role switch is set with usb_role_switch_set_role(). If the usb_role_switch parameter is error or null, the function simply returns 0. So, to update usb_role_switch role if a device is attached before the irq is registered, usb_role_switch must be registered before irq registration. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Cc: stable Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20210716120718.20398-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/stusb160x.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c index 6eaeba9b096e..3d3848e7c2c2 100644 --- a/drivers/usb/typec/stusb160x.c +++ b/drivers/usb/typec/stusb160x.c @@ -739,10 +739,6 @@ static int stusb160x_probe(struct i2c_client *client) typec_set_pwr_opmode(chip->port, chip->pwr_opmode); if (client->irq) { - ret = stusb160x_irq_init(chip, client->irq); - if (ret) - goto port_unregister; - chip->role_sw = fwnode_usb_role_switch_get(fwnode); if (IS_ERR(chip->role_sw)) { ret = PTR_ERR(chip->role_sw); @@ -752,6 +748,10 @@ static int stusb160x_probe(struct i2c_client *client) ret); goto port_unregister; } + + ret = stusb160x_irq_init(chip, client->irq); + if (ret) + goto role_sw_put; } else { /* * If Source or Dual power role, need to enable VDD supply @@ -775,6 +775,9 @@ static int stusb160x_probe(struct i2c_client *client) return 0; +role_sw_put: + if (chip->role_sw) + usb_role_switch_put(chip->role_sw); port_unregister: typec_unregister_port(chip->port); all_reg_disable: -- cgit v1.2.3-58-ga151 From 6b63376722d9e1b915a2948e9b30f4ba2712e3f5 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Fri, 16 Jul 2021 14:07:18 +0200 Subject: usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20210716120718.20398-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/stusb160x.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c index 3d3848e7c2c2..e7745d1c2a5c 100644 --- a/drivers/usb/typec/stusb160x.c +++ b/drivers/usb/typec/stusb160x.c @@ -685,6 +685,15 @@ static int stusb160x_probe(struct i2c_client *client) if (!fwnode) return -ENODEV; + /* + * This fwnode has a "compatible" property, but is never populated as a + * struct device. Instead we simply parse it to read the properties. + * This it breaks fw_devlink=on. To maintain backward compatibility + * with existing DT files, we work around this by deleting any + * fwnode_links to/from this fwnode. + */ + fw_devlink_purge_absent_suppliers(fwnode); + /* * When both VDD and VSYS power supplies are present, the low power * supply VSYS is selected when VSYS voltage is above 3.1 V. -- cgit v1.2.3-58-ga151 From 5b01248156bd75303e66985c351dee648c149979 Mon Sep 17 00:00:00 2001 From: Zhang Qilong Date: Fri, 18 Jun 2021 22:14:41 +0800 Subject: usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver. Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Cc: stable Signed-off-by: Zhang Qilong Link: https://lore.kernel.org/r/20210618141441.107817-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/tegra-xudc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index a54d1cef17db..c0ca7144e512 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -3853,6 +3853,7 @@ static int tegra_xudc_probe(struct platform_device *pdev) return 0; free_eps: + pm_runtime_disable(&pdev->dev); tegra_xudc_free_eps(xudc); free_event_ring: tegra_xudc_free_event_ring(xudc); -- cgit v1.2.3-58-ga151 From b5fdf5c6e6bee35837e160c00ac89327bdad031b Mon Sep 17 00:00:00 2001 From: Mark Tomlinson Date: Fri, 25 Jun 2021 15:14:56 +1200 Subject: usb: max-3421: Prevent corruption of freed memory The MAX-3421 USB driver remembers the state of the USB toggles for a device/endpoint. To save SPI writes, this was only done when a new device/endpoint was being used. Unfortunately, if the old device was removed, this would cause writes to freed memory. To fix this, a simpler scheme is used. The toggles are read from hardware when a URB is completed, and the toggles are always written to hardware when any URB transaction is started. This will cause a few more SPI transactions, but no causes kernel panics. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable Signed-off-by: Mark Tomlinson Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/max3421-hcd.c | 44 ++++++++++++++---------------------------- 1 file changed, 14 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index e7a8e0609853..59cc1bc7f12f 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -153,8 +153,6 @@ struct max3421_hcd { */ struct urb *curr_urb; enum scheduling_pass sched_pass; - struct usb_device *loaded_dev; /* dev that's loaded into the chip */ - int loaded_epnum; /* epnum whose toggles are loaded */ int urb_done; /* > 0 -> no errors, < 0: errno */ size_t curr_len; u8 hien; @@ -492,39 +490,17 @@ max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev) * Caller must NOT hold HCD spinlock. */ static void -max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum, - int force_toggles) +max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum) { - struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); - int old_epnum, same_ep, rcvtog, sndtog; - struct usb_device *old_dev; + int rcvtog, sndtog; u8 hctl; - old_dev = max3421_hcd->loaded_dev; - old_epnum = max3421_hcd->loaded_epnum; - - same_ep = (dev == old_dev && epnum == old_epnum); - if (same_ep && !force_toggles) - return; - - if (old_dev && !same_ep) { - /* save the old end-points toggles: */ - u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); - - rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1; - sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; - - /* no locking: HCD (i.e., we) own toggles, don't we? */ - usb_settoggle(old_dev, old_epnum, 0, rcvtog); - usb_settoggle(old_dev, old_epnum, 1, sndtog); - } /* setup new endpoint's toggle bits: */ rcvtog = usb_gettoggle(dev, epnum, 0); sndtog = usb_gettoggle(dev, epnum, 1); hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) | BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT)); - max3421_hcd->loaded_epnum = epnum; spi_wr8(hcd, MAX3421_REG_HCTL, hctl); /* @@ -532,7 +508,6 @@ max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum, * address-assignment so it's best to just always load the * address whenever the end-point changed/was forced. */ - max3421_hcd->loaded_dev = dev; spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum); } @@ -667,7 +642,7 @@ max3421_select_and_start_urb(struct usb_hcd *hcd) struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); struct urb *urb, *curr_urb = NULL; struct max3421_ep *max3421_ep; - int epnum, force_toggles = 0; + int epnum; struct usb_host_endpoint *ep; struct list_head *pos; unsigned long flags; @@ -777,7 +752,6 @@ done: usb_settoggle(urb->dev, epnum, 0, 1); usb_settoggle(urb->dev, epnum, 1, 1); max3421_ep->pkt_state = PKT_STATE_SETUP; - force_toggles = 1; } else max3421_ep->pkt_state = PKT_STATE_TRANSFER; } @@ -785,7 +759,7 @@ done: spin_unlock_irqrestore(&max3421_hcd->lock, flags); max3421_ep->last_active = max3421_hcd->frame_number; - max3421_set_address(hcd, urb->dev, epnum, force_toggles); + max3421_set_address(hcd, urb->dev, epnum); max3421_set_speed(hcd, urb->dev); max3421_next_transfer(hcd, 0); return 1; @@ -1379,6 +1353,16 @@ max3421_urb_done(struct usb_hcd *hcd) status = 0; urb = max3421_hcd->curr_urb; if (urb) { + /* save the old end-points toggles: */ + u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1; + int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; + int epnum = usb_endpoint_num(&urb->ep->desc); + + /* no locking: HCD (i.e., we) own toggles, don't we? */ + usb_settoggle(urb->dev, epnum, 0, rcvtog); + usb_settoggle(urb->dev, epnum, 1, sndtog); + max3421_hcd->curr_urb = NULL; spin_lock_irqsave(&max3421_hcd->lock, flags); usb_hcd_unlink_urb_from_ep(hcd, urb); -- cgit v1.2.3-58-ga151 From 40edb52298df4c1dbbdb30b19e3ce92cf612a918 Mon Sep 17 00:00:00 2001 From: Linyu Yuan Date: Tue, 29 Jun 2021 09:51:18 +0800 Subject: usb: dwc3: avoid NULL access of usb_gadget_driver we found crash in dwc3_disconnect_gadget(), it is because dwc->gadget_driver become NULL before async access. 7dc0c55e9f30 ('USB: UDC core: Add udc_async_callbacks gadget op') suggest a common way to avoid such kind of issue. this change implment the callback in dwc3 and change related functions which have callback to usb gadget driver. Acked-by: Alan Stern Signed-off-by: Linyu Yuan Link: https://lore.kernel.org/r/20210629015118.7944-1-linyyuan@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/ep0.c | 10 ++++++---- drivers/usb/dwc3/gadget.c | 21 ++++++++++++++++----- 3 files changed, 23 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index dccdf13b5f9e..5991766239ba 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1279,6 +1279,7 @@ struct dwc3 { unsigned dis_metastability_quirk:1; unsigned dis_split_quirk:1; + unsigned async_callbacks:1; u16 imod_interval; }; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 3cd294264372..2f9e45eed228 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -597,11 +597,13 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { - int ret; + int ret = -EINVAL; - spin_unlock(&dwc->lock); - ret = dwc->gadget_driver->setup(dwc->gadget, ctrl); - spin_lock(&dwc->lock); + if (dwc->async_callbacks) { + spin_unlock(&dwc->lock); + ret = dwc->gadget_driver->setup(dwc->gadget, ctrl); + spin_lock(&dwc->lock); + } return ret; } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index af6d7f157989..45f2bc0807e8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2585,6 +2585,16 @@ static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA) return ret; } +static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->async_callbacks = enable; + spin_unlock_irqrestore(&dwc->lock, flags); +} + static const struct usb_gadget_ops dwc3_gadget_ops = { .get_frame = dwc3_gadget_get_frame, .wakeup = dwc3_gadget_wakeup, @@ -2596,6 +2606,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { .udc_set_ssp_rate = dwc3_gadget_set_ssp_rate, .get_config_params = dwc3_gadget_config_params, .vbus_draw = dwc3_gadget_vbus_draw, + .udc_async_callbacks = dwc3_gadget_async_callbacks, }; /* -------------------------------------------------------------------------- */ @@ -3231,7 +3242,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, static void dwc3_disconnect_gadget(struct dwc3 *dwc) { - if (dwc->gadget_driver && dwc->gadget_driver->disconnect) { + if (dwc->async_callbacks && dwc->gadget_driver->disconnect) { spin_unlock(&dwc->lock); dwc->gadget_driver->disconnect(dwc->gadget); spin_lock(&dwc->lock); @@ -3240,7 +3251,7 @@ static void dwc3_disconnect_gadget(struct dwc3 *dwc) static void dwc3_suspend_gadget(struct dwc3 *dwc) { - if (dwc->gadget_driver && dwc->gadget_driver->suspend) { + if (dwc->async_callbacks && dwc->gadget_driver->suspend) { spin_unlock(&dwc->lock); dwc->gadget_driver->suspend(dwc->gadget); spin_lock(&dwc->lock); @@ -3249,7 +3260,7 @@ static void dwc3_suspend_gadget(struct dwc3 *dwc) static void dwc3_resume_gadget(struct dwc3 *dwc) { - if (dwc->gadget_driver && dwc->gadget_driver->resume) { + if (dwc->async_callbacks && dwc->gadget_driver->resume) { spin_unlock(&dwc->lock); dwc->gadget_driver->resume(dwc->gadget); spin_lock(&dwc->lock); @@ -3261,7 +3272,7 @@ static void dwc3_reset_gadget(struct dwc3 *dwc) if (!dwc->gadget_driver) return; - if (dwc->gadget->speed != USB_SPEED_UNKNOWN) { + if (dwc->async_callbacks && dwc->gadget->speed != USB_SPEED_UNKNOWN) { spin_unlock(&dwc->lock); usb_gadget_udc_reset(dwc->gadget, dwc->gadget_driver); spin_lock(&dwc->lock); @@ -3585,7 +3596,7 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) * implemented. */ - if (dwc->gadget_driver && dwc->gadget_driver->resume) { + if (dwc->async_callbacks && dwc->gadget_driver->resume) { spin_unlock(&dwc->lock); dwc->gadget_driver->resume(dwc->gadget); spin_lock(&dwc->lock); -- cgit v1.2.3-58-ga151 From 4bb233b7ba87785c7ac519863f51ba61f4dbc459 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 1 Jul 2021 15:43:05 +0100 Subject: usb: gadget: u_serial: remove WARN_ON on null port Loading and then unloading module g_dpgp on a VM that does not support the driver currently throws a WARN_ON message because the port has not been initialized. Removing an unused driver is a valid use-case and the WARN_ON kernel warning is a bit excessive, so remove it. Cleans up: [27654.638698] ------------[ cut here ]------------ [27654.638705] WARNING: CPU: 6 PID: 2956336 at drivers/usb/gadget/function/u_serial.c:1201 gserial_free_line+0x7c/0x90 [u_serial] [27654.638728] Modules linked in: g_dbgp(-) u_serial usb_f_tcm target_core_mod libcomposite udc_core vmw_vmci mcb i2c_nforce2 i2c_amd756 nfit cx8800 videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 cx88xx tveeprom videobuf2_common videodev mc ccp hid_generic hid intel_ishtp cros_ec mc13xxx_core vfio_mdev mdev i915 i2c_algo_bit kvm ppdev parport zatm eni suni uPD98402 atm rio_scan binder_linux hwmon_vid video ipmi_devintf ipmi_msghandler zstd nls_utf8 decnet qrtr ns sctp ip6_udp_tunnel udp_tunnel fcrypt pcbc nhc_udp nhc_ipv6 nhc_routing nhc_mobility nhc_hop nhc_dest nhc_fragment 6lowpan ts_kmp dccp_ipv6 dccp_ipv4 dccp snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq_dummy snd_seq snd_seq_device xen_front_pgdir_shbuf binfmt_misc nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common snd_hda_codec_generic ledtrig_audio snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd rapl soundcore joydev input_leds mac_hid serio_raw efi_pstore [27654.638880] qemu_fw_cfg sch_fq_codel msr virtio_rng autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear qxl drm_ttm_helper crct10dif_pclmul ttm drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops cec net_failover rc_core ahci psmouse drm libahci lpc_ich virtio_blk failover [last unloaded: u_ether] [27654.638949] CPU: 6 PID: 2956336 Comm: modprobe Tainted: P O 5.13.0-9-generic #9 [27654.638956] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [27654.638969] RIP: 0010:gserial_free_line+0x7c/0x90 [u_serial] [27654.638981] Code: 20 00 00 00 00 e8 74 1a ba c9 4c 89 e7 e8 8c fe ff ff 48 8b 3d 75 3b 00 00 44 89 f6 e8 3d 7c 69 c9 5b 41 5c 41 5d 41 5e 5d c3 <0f> 0b 4c 89 ef e8 4a 1a ba c9 5b 41 5c 41 5d 41 5e 5d c3 90 0f 1f [27654.638986] RSP: 0018:ffffba0b81403da0 EFLAGS: 00010246 [27654.638992] RAX: 0000000000000000 RBX: ffffffffc0eaf6a0 RCX: 0000000000000000 [27654.638996] RDX: ffff8e21c0cac8c0 RSI: 0000000000000006 RDI: ffffffffc0eaf6a0 [27654.639000] RBP: ffffba0b81403dc0 R08: ffffba0b81403de0 R09: fefefefefefefeff [27654.639003] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [27654.639006] R13: ffffffffc0eaf6a0 R14: 0000000000000000 R15: 0000000000000000 [27654.639010] FS: 00007faa1935e740(0000) GS:ffff8e223bd80000(0000) knlGS:0000000000000000 [27654.639015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27654.639019] CR2: 00007ffc840cd4e8 CR3: 000000000e1ac006 CR4: 0000000000370ee0 [27654.639028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [27654.639031] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [27654.639035] Call Trace: [27654.639044] dbgp_exit+0x1c/0xa1a [g_dbgp] [27654.639054] __do_sys_delete_module.constprop.0+0x144/0x260 [27654.639066] ? call_rcu+0xe/0x10 [27654.639073] __x64_sys_delete_module+0x12/0x20 [27654.639081] do_syscall_64+0x61/0xb0 [27654.639092] ? exit_to_user_mode_loop+0xec/0x160 [27654.639098] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639104] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639110] ? __x64_sys_close+0x12/0x40 [27654.639119] ? do_syscall_64+0x6e/0xb0 [27654.639126] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639132] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639137] ? __x64_sys_newfstatat+0x1e/0x20 [27654.639146] ? do_syscall_64+0x6e/0xb0 [27654.639154] ? exc_page_fault+0x8f/0x170 [27654.639159] ? asm_exc_page_fault+0x8/0x30 [27654.639166] entry_SYSCALL_64_after_hwframe+0x44/0xae [27654.639173] RIP: 0033:0x7faa194a4b2b [27654.639179] Code: 73 01 c3 48 8b 0d 3d 73 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 73 0c 00 f7 d8 64 89 01 48 [27654.639185] RSP: 002b:00007ffc840d0578 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [27654.639191] RAX: ffffffffffffffda RBX: 000056060f9f4e70 RCX: 00007faa194a4b2b [27654.639194] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000056060f9f4ed8 [27654.639197] RBP: 000056060f9f4e70 R08: 0000000000000000 R09: 0000000000000000 [27654.639200] R10: 00007faa1951eac0 R11: 0000000000000206 R12: 000056060f9f4ed8 [27654.639203] R13: 0000000000000000 R14: 000056060f9f4ed8 R15: 00007ffc840d06c8 [27654.639219] ---[ end trace 8dd0ea0bb32ce94a ]--- Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20210701144305.110078-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/u_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index bffef8e47dac..281ca766698a 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -1198,7 +1198,7 @@ void gserial_free_line(unsigned char port_num) struct gs_port *port; mutex_lock(&ports[port_num].lock); - if (WARN_ON(!ports[port_num].port)) { + if (!ports[port_num].port) { mutex_unlock(&ports[port_num].lock); return; } -- cgit v1.2.3-58-ga151 From 0665e387318607d8269bfdea60723c627c8bae43 Mon Sep 17 00:00:00 2001 From: Greg Thelen Date: Fri, 2 Jul 2021 00:12:24 -0700 Subject: usb: xhci: avoid renesas_usb_fw.mem when it's unusable Commit a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory") added renesas_usb_fw.mem firmware reference to xhci-pci. Thus modinfo indicates xhci-pci.ko has "firmware: renesas_usb_fw.mem". But the firmware is only actually used with CONFIG_USB_XHCI_PCI_RENESAS. An unusable firmware reference can trigger safety checkers which look for drivers with unmet firmware dependencies. Avoid referring to renesas_usb_fw.mem in circumstances when it cannot be loaded (when CONFIG_USB_XHCI_PCI_RENESAS isn't set). Fixes: a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory") Cc: stable Signed-off-by: Greg Thelen Link: https://lore.kernel.org/r/20210702071224.3673568-1-gthelen@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 18c2bbddf080..1c9a7957c45c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -636,7 +636,14 @@ static const struct pci_device_id pci_ids[] = { { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, pci_ids); + +/* + * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't + * load firmware, so don't encumber the xhci-pci driver with it. + */ +#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) MODULE_FIRMWARE("renesas_usb_fw.mem"); +#endif /* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver xhci_pci_driver = { -- cgit v1.2.3-58-ga151 From 3d11de2d57b92e943767d7d070b0df9b18089d56 Mon Sep 17 00:00:00 2001 From: Artur Petrosyan Date: Sat, 10 Jul 2021 13:22:46 +0400 Subject: usb: phy: Fix page fault from usb_phy_uevent When the dwc2 platform device is removed, it unregisters the generic phy. usb_remove_phy() is called and the dwc2 usb_phy is removed from the "phy_list", but the uevent may still attempt to get the usb_phy from the list, resulting in a page fault bug. Currently we can't access the usb_phy from the "phy_list" after the device is removed. As a fix check to make sure that we can get the usb_phy before moving forward with the uevent. [ 84.949345] BUG: unable to handle page fault for address:00000007935688d8 [ 84.949349] #PF: supervisor read access in kernel mode [ 84.949351] #PF: error_code(0x0000) - not-present page [ 84.949353] PGD 0 P4D 0 [ 84.949356] Oops: 0000 [#1] SMP PTI [ 84.949360] CPU: 2 PID: 2081 Comm: rmmod Not tainted 5.13.0-rc4-snps-16547-ga8534cb092d7-dirty #32 [ 84.949363] Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.54 11/02/2011 [ 84.949365] RIP: 0010:usb_phy_uevent+0x99/0x121 [ 84.949372] Code: 8d 83 f8 00 00 00 48 3d b0 12 22 94 74 05 4c 3b 23 75 5b 8b 83 9c 00 00 00 be 32 00 00 00 48 8d 7c 24 04 48 c7 c2 d4 5d 7b 93 <48> 8b 0c c5 e0 88 56 93 e8 0f 63 8a ff 8b 83 98 00 00 00 be 32 00 [ 84.949375] RSP: 0018:ffffa46bc0f2fc70 EFLAGS: 00010246 [ 84.949378] RAX: 00000000ffffffff RBX: ffffffff942211b8 RCX: 0000000000000027 [ 84.949380] RDX: ffffffff937b5dd4 RSI: 0000000000000032 RDI: ffffa46bc0f2fc74 [ 84.949383] RBP: ffff94a306613000 R08: 0000000000000000 R09: 00000000fffeffff [ 84.949385] R10: ffffa46bc0f2faa8 R11: ffffa46bc0f2faa0 R12: ffff94a30186d410 [ 84.949387] R13: ffff94a32d188a80 R14: ffff94a30029f960 R15: ffffffff93522dd0 [ 84.949389] FS: 00007efdbd417540(0000) GS:ffff94a513a80000(0000) knlGS:0000000000000000 [ 84.949392] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.949394] CR2: 00000007935688d8 CR3: 0000000165606000 CR4: 00000000000006e0 [ 84.949396] Call Trace: [ 84.949401] dev_uevent+0x190/0x1ad [ 84.949408] kobject_uevent_env+0x18e/0x46c [ 84.949414] device_release_driver_internal+0x17f/0x18e [ 84.949418] bus_remove_device+0xd3/0xe5 [ 84.949421] device_del+0x1c3/0x31d [ 84.949425] ? kobject_put+0x97/0xa8 [ 84.949428] platform_device_del+0x1c/0x63 [ 84.949432] platform_device_unregister+0xa/0x11 [ 84.949436] dwc2_pci_remove+0x1e/0x2c [dwc2_pci] [ 84.949440] pci_device_remove+0x31/0x81 [ 84.949445] device_release_driver_internal+0xea/0x18e [ 84.949448] driver_detach+0x68/0x72 [ 84.949450] bus_remove_driver+0x63/0x82 [ 84.949453] pci_unregister_driver+0x1a/0x75 [ 84.949457] __do_sys_delete_module+0x149/0x1e9 [ 84.949462] ? task_work_run+0x64/0x6e [ 84.949465] ? exit_to_user_mode_prepare+0xd4/0x10d [ 84.949471] do_syscall_64+0x5d/0x70 [ 84.949475] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 84.949480] RIP: 0033:0x7efdbd563bcb [ 84.949482] Code: 73 01 c3 48 8b 0d c5 82 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 95 82 0c 00 f7 d8 64 89 01 48 [ 84.949485] RSP: 002b:00007ffe944d7d98 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 84.949489] RAX: ffffffffffffffda RBX: 00005651072eb700 RCX: 00007efdbd563bcb [ 84.949491] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005651072eb768 [ 84.949493] RBP: 00007ffe944d7df8 R08: 0000000000000000 R09: 0000000000000000 [ 84.949495] R10: 00007efdbd5dfac0 R11: 0000000000000206 R12: 00007ffe944d7fd0 [ 84.949497] R13: 00007ffe944d8610 R14: 00005651072eb2a0 R15: 00005651072eb700 [ 84.949500] Modules linked in: uas configfs dwc2_pci(-) phy_generic fuse crc32c_intel [last unloaded: udc_core] [ 84.949508] CR2: 00000007935688d8 [ 84.949510] ---[ end trace e40c871ca3e4dc9e ]--- [ 84.949512] RIP: 0010:usb_phy_uevent+0x99/0x121 Fixes: a8534cb092d7 ("usb: phy: introduce usb_phy device type with its own uevent handler") Reviewed-by: Peter Chen Signed-off-by: Artur Petrosyan Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/20210710092247.D7AFEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/phy.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 83ed5089475a..1b24492bb4e5 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -86,10 +86,10 @@ static struct usb_phy *__device_to_usb_phy(struct device *dev) list_for_each_entry(usb_phy, &phy_list, head) { if (usb_phy->dev == dev) - break; + return usb_phy; } - return usb_phy; + return NULL; } static void usb_phy_set_default_current(struct usb_phy *usb_phy) @@ -150,8 +150,14 @@ static int usb_phy_uevent(struct device *dev, struct kobj_uevent_env *env) struct usb_phy *usb_phy; char uchger_state[50] = { 0 }; char uchger_type[50] = { 0 }; + unsigned long flags; + spin_lock_irqsave(&phy_lock, flags); usb_phy = __device_to_usb_phy(dev); + spin_unlock_irqrestore(&phy_lock, flags); + + if (!usb_phy) + return -ENODEV; snprintf(uchger_state, ARRAY_SIZE(uchger_state), "USB_CHARGER_STATE=%s", usb_chger_state[usb_phy->chg_state]); -- cgit v1.2.3-58-ga151 From fecb3a171db425e5068b27231f8efe154bf72637 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 13 Jul 2021 09:32:55 +0400 Subject: usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode. Because of dwc2_hsotg_ep_stop_xfr() function uses poll mode, first need to mask GINTSTS_GOUTNAKEFF interrupt. In Slave mode GINTSTS_GOUTNAKEFF interrupt will be aserted only after pop OUT NAK status packet from RxFIFO. In dwc2_hsotg_ep_sethalt() function before setting DCTL_SGOUTNAK need to unmask GOUTNAKEFF interrupt. Tested by USBCV CH9 and MSC tests set in Slave, BDMA and DDMA. All tests are passed. Fixes: a4f827714539a ("usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable") Fixes: 6070636c4918c ("usb: dwc2: Fix Stalling a Non-Isochronous OUT EP") Cc: stable Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/e17fad802bbcaf879e1ed6745030993abb93baf8.1626152924.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index c581ee41ac81..74d25019272f 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3900,9 +3900,27 @@ static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg, __func__); } } else { + /* Mask GINTSTS_GOUTNAKEFF interrupt */ + dwc2_hsotg_disable_gsint(hsotg, GINTSTS_GOUTNAKEFF); + if (!(dwc2_readl(hsotg, GINTSTS) & GINTSTS_GOUTNAKEFF)) dwc2_set_bit(hsotg, DCTL, DCTL_SGOUTNAK); + if (!using_dma(hsotg)) { + /* Wait for GINTSTS_RXFLVL interrupt */ + if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, + GINTSTS_RXFLVL, 100)) { + dev_warn(hsotg->dev, "%s: timeout GINTSTS.RXFLVL\n", + __func__); + } else { + /* + * Pop GLOBAL OUT NAK status packet from RxFIFO + * to assert GOUTNAKEFF interrupt + */ + dwc2_readl(hsotg, GRXSTSP); + } + } + /* Wait for global nak to take effect */ if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_GOUTNAKEFF, 100)) @@ -4348,6 +4366,9 @@ static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now) epctl = dwc2_readl(hs, epreg); if (value) { + /* Unmask GOUTNAKEFF interrupt */ + dwc2_hsotg_en_gsint(hs, GINTSTS_GOUTNAKEFF); + if (!(dwc2_readl(hs, GINTSTS) & GINTSTS_GOUTNAKEFF)) dwc2_set_bit(hs, DCTL, DCTL_SGOUTNAK); // STALL bit will be set in GOUTNAKEFF interrupt handler -- cgit v1.2.3-58-ga151 From 5719df243e118fb343725e8b2afb1637e1af1373 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 24 Jun 2021 21:20:39 +0900 Subject: usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() This driver has a potential issue which this driver is possible to cause superfluous irqs after usb_pkt_pop() is called. So, after the commit 3af32605289e ("usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()") had been applied, we could observe the following error happened when we used g_audio. renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22 To fix the issue, disable the tx or rx interrupt in usb_pkt_pop(). Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()") Cc: # v4.4+ Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/fifo.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index b5e7991dc7d9..a3c2b01ccf7b 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -101,6 +101,8 @@ static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo, #define usbhsf_dma_map(p) __usbhsf_dma_map_ctrl(p, 1) #define usbhsf_dma_unmap(p) __usbhsf_dma_map_ctrl(p, 0) static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map); +static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable); +static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable); struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) { struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); @@ -123,6 +125,11 @@ struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) if (chan) { dmaengine_terminate_all(chan); usbhsf_dma_unmap(pkt); + } else { + if (usbhs_pipe_is_dir_in(pipe)) + usbhsf_rx_irq_ctrl(pipe, 0); + else + usbhsf_tx_irq_ctrl(pipe, 0); } usbhs_pipe_clear_without_sequence(pipe, 0, 0); -- cgit v1.2.3-58-ga151 From c4a0f7a6ab5417eb6105b0e1d7e6e67f6ef7d4e5 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 16 Jul 2021 07:01:27 +0200 Subject: usb: dwc2: Skip clock gating on Samsung SoCs Commit 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") changed the way the driver handles power down modes in a such way that it uses clock gating when no other power down mode is available. This however doesn't work well on the DWC2 implementation used on the Samsung SoCs. When a clock gating is enabled, system hangs. It looks that the proper clock gating requires some additional glue code in the shared USB2 PHY and/or Samsung glue code for the DWC2. To restore driver operation on the Samsung SoCs simply skip enabling clock gating mode until one finds what is really needed to make it working reliably. Fixes: 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") Cc: stable Acked-by: Krzysztof Kozlowski Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20210716050127.4406-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/core.h | 4 ++++ drivers/usb/dwc2/core_intr.c | 3 ++- drivers/usb/dwc2/hcd.c | 6 ++++-- drivers/usb/dwc2/params.c | 1 + 4 files changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index ab6b815e0089..483de2bbfaab 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -383,6 +383,9 @@ enum dwc2_ep0_state { * 0 - No (default) * 1 - Partial power down * 2 - Hibernation + * @no_clock_gating: Specifies whether to avoid clock gating feature. + * 0 - No (use clock gating) + * 1 - Yes (avoid it) * @lpm: Enable LPM support. * 0 - No * 1 - Yes @@ -480,6 +483,7 @@ struct dwc2_core_params { #define DWC2_POWER_DOWN_PARAM_NONE 0 #define DWC2_POWER_DOWN_PARAM_PARTIAL 1 #define DWC2_POWER_DOWN_PARAM_HIBERNATION 2 + bool no_clock_gating; bool lpm; bool lpm_clock_gating; diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index a5ab03808da6..a5c52b237e72 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -556,7 +556,8 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) * If neither hibernation nor partial power down are supported, * clock gating is used to save power. */ - dwc2_gadget_enter_clock_gating(hsotg); + if (!hsotg->params.no_clock_gating) + dwc2_gadget_enter_clock_gating(hsotg); } /* diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 035d4911a3c3..2a7828971d05 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3338,7 +3338,8 @@ int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) * If not hibernation nor partial power down are supported, * clock gating is used to save power. */ - dwc2_host_enter_clock_gating(hsotg); + if (!hsotg->params.no_clock_gating) + dwc2_host_enter_clock_gating(hsotg); break; } @@ -4402,7 +4403,8 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd) * If not hibernation nor partial power down are supported, * clock gating is used to save power. */ - dwc2_host_enter_clock_gating(hsotg); + if (!hsotg->params.no_clock_gating) + dwc2_host_enter_clock_gating(hsotg); /* After entering suspend, hardware is not accessible */ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 67c5eb140232..59e119345994 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -76,6 +76,7 @@ static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) struct dwc2_core_params *p = &hsotg->params; p->power_down = DWC2_POWER_DOWN_PARAM_NONE; + p->no_clock_gating = true; p->phy_utmi_width = 8; } -- cgit v1.2.3-58-ga151 From d53dc38857f6dbefabd9eecfcbf67b6eac9a1ef4 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 20 Jul 2021 05:41:24 -0700 Subject: usb: dwc2: gadget: Fix sending zero length packet in DDMA mode. Sending zero length packet in DDMA mode perform by DMA descriptor by setting SP (short packet) flag. For DDMA in function dwc2_hsotg_complete_in() does not need to send zlp. Tested by USBCV MSC tests. Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers") Cc: stable Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 74d25019272f..3146df6e6510 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2749,12 +2749,14 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg, return; } - /* Zlp for all endpoints, for ep0 only in DATA IN stage */ + /* Zlp for all endpoints in non DDMA, for ep0 only in DATA IN stage */ if (hs_ep->send_zlp) { - dwc2_hsotg_program_zlp(hsotg, hs_ep); hs_ep->send_zlp = 0; - /* transfer will be completed on next complete interrupt */ - return; + if (!using_desc_dma(hsotg)) { + dwc2_hsotg_program_zlp(hsotg, hs_ep); + /* transfer will be completed on next complete interrupt */ + return; + } } if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) { -- cgit v1.2.3-58-ga151 From 7764656b108cd308c39e9a8554353b8f9ca232a3 Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Mon, 5 Jul 2021 21:38:29 +0800 Subject: nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING Followling process: nvme_probe nvme_reset_ctrl nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING) queue_work(nvme_reset_wq, &ctrl->reset_work) --------------> nvme_remove nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING) worker_thread process_one_work nvme_reset_work WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING) , which will trigger WARN_ON in nvme_reset_work(): [ 127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594 [ 127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0 [ 127.552518] Call Trace: [ 127.552840] ? kvm_sched_clock_read+0x25/0x40 [ 127.553936] ? native_send_call_func_single_ipi+0x1c/0x30 [ 127.555117] ? send_call_function_single_ipi+0x9b/0x130 [ 127.556263] ? __smp_call_single_queue+0x48/0x60 [ 127.557278] ? ttwu_queue_wakelist+0xfa/0x1c0 [ 127.558231] ? try_to_wake_up+0x265/0x9d0 [ 127.559120] ? ext4_end_io_rsv_work+0x160/0x290 [ 127.560118] process_one_work+0x28c/0x640 [ 127.561002] worker_thread+0x39a/0x700 [ 127.561833] ? rescuer_thread+0x580/0x580 [ 127.562714] kthread+0x18c/0x1e0 [ 127.563444] ? set_kthread_struct+0x70/0x70 [ 127.564347] ret_from_fork+0x1f/0x30 The preceding problem can be easily reproduced by executing following script (based on blktests suite): test() { pdev="$(_get_pci_dev_from_blkdev)" sysfs="/sys/bus/pci/devices/${pdev}" for ((i = 0; i < 10; i++)); do echo 1 > "$sysfs/remove" echo 1 > /sys/bus/pci/rescan done } Since the device ctrl could be updated as an non-RESETTING state by repeating probe/remove in userspace (which is a normal situation), we can replace stack dumping WARN_ON with a warnning message. Fixes: 82b057caefaff ("nvme-pci: fix multiple ctrl removal schedulin") Signed-off-by: Zhihao Cheng --- drivers/nvme/host/pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 320051f5a3dd..51852085239e 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2631,7 +2631,9 @@ static void nvme_reset_work(struct work_struct *work) bool was_suspend = !!(dev->ctrl.ctrl_config & NVME_CC_SHN_NORMAL); int result; - if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)) { + if (dev->ctrl.state != NVME_CTRL_RESETTING) { + dev_warn(dev->ctrl.device, "ctrl state %d is not RESETTING\n", + dev->ctrl.state); result = -ENODEV; goto out; } -- cgit v1.2.3-58-ga151 From 5396fdac56d87d04e75e5068c0c92d33625f51e7 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 16 Jul 2021 13:30:35 +0200 Subject: nvme: fix refcounting imbalance when all paths are down When the last path to a ns_head drops the current code removes the ns_head from the subsystem list, but will only delete the disk itself if the last reference to the ns_head drops. This is causing an refcounting imbalance eg when applications have a reference to the disk, as then they'll never get notified that the disk is in fact dead. This patch moves the call 'del_gendisk' into nvme_mpath_check_last_path(), ensuring that the disk can be properly removed and applications get the appropriate notifications. Signed-off-by: Hannes Reinecke Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 14 +++++++++++--- drivers/nvme/host/multipath.c | 9 ++++++++- drivers/nvme/host/nvme.h | 11 ++--------- 3 files changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 11779be42186..17c05a4595f0 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3807,6 +3807,8 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid, static void nvme_ns_remove(struct nvme_ns *ns) { + bool last_path = false; + if (test_and_set_bit(NVME_NS_REMOVING, &ns->flags)) return; @@ -3815,8 +3817,6 @@ static void nvme_ns_remove(struct nvme_ns *ns) mutex_lock(&ns->ctrl->subsys->lock); list_del_rcu(&ns->siblings); - if (list_empty(&ns->head->list)) - list_del_init(&ns->head->entry); mutex_unlock(&ns->ctrl->subsys->lock); synchronize_rcu(); /* guarantee not available in head->list */ @@ -3836,7 +3836,15 @@ static void nvme_ns_remove(struct nvme_ns *ns) list_del_init(&ns->list); up_write(&ns->ctrl->namespaces_rwsem); - nvme_mpath_check_last_path(ns); + /* Synchronize with nvme_init_ns_head() */ + mutex_lock(&ns->head->subsys->lock); + if (list_empty(&ns->head->list)) { + list_del_init(&ns->head->entry); + last_path = true; + } + mutex_unlock(&ns->head->subsys->lock); + if (last_path) + nvme_mpath_shutdown_disk(ns->head); nvme_put_ns(ns); } diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 0ea5298469c3..3f32c5e86bfc 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -760,14 +760,21 @@ void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id) #endif } -void nvme_mpath_remove_disk(struct nvme_ns_head *head) +void nvme_mpath_shutdown_disk(struct nvme_ns_head *head) { if (!head->disk) return; + kblockd_schedule_work(&head->requeue_work); if (head->disk->flags & GENHD_FL_UP) { nvme_cdev_del(&head->cdev, &head->cdev_device); del_gendisk(head->disk); } +} + +void nvme_mpath_remove_disk(struct nvme_ns_head *head) +{ + if (!head->disk) + return; blk_set_queue_dying(head->disk->queue); /* make sure all pending bios are cleaned up */ kblockd_schedule_work(&head->requeue_work); diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 18ef8dd03a90..5cd1fa3b8464 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -716,14 +716,7 @@ void nvme_mpath_uninit(struct nvme_ctrl *ctrl); void nvme_mpath_stop(struct nvme_ctrl *ctrl); bool nvme_mpath_clear_current_path(struct nvme_ns *ns); void nvme_mpath_clear_ctrl_paths(struct nvme_ctrl *ctrl); - -static inline void nvme_mpath_check_last_path(struct nvme_ns *ns) -{ - struct nvme_ns_head *head = ns->head; - - if (head->disk && list_empty(&head->list)) - kblockd_schedule_work(&head->requeue_work); -} +void nvme_mpath_shutdown_disk(struct nvme_ns_head *head); static inline void nvme_trace_bio_complete(struct request *req) { @@ -772,7 +765,7 @@ static inline bool nvme_mpath_clear_current_path(struct nvme_ns *ns) static inline void nvme_mpath_clear_ctrl_paths(struct nvme_ctrl *ctrl) { } -static inline void nvme_mpath_check_last_path(struct nvme_ns *ns) +static inline void nvme_mpath_shutdown_disk(struct nvme_ns_head *head) { } static inline void nvme_trace_bio_complete(struct request *req) -- cgit v1.2.3-58-ga151 From 234211b8dd161fa25f192c78d5a8d2dd6bf920a0 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 19 Jul 2021 09:44:39 -0700 Subject: nvme: fix nvme_setup_command metadata trace event The metadata address is set after the trace event, so the trace is not capturing anything useful. Rather than logging the memory address, it's useful to know if the command carries a metadata payload, so change the trace event to log that true/false state instead. Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/trace.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/trace.h b/drivers/nvme/host/trace.h index daaf700eae79..35bac7a25422 100644 --- a/drivers/nvme/host/trace.h +++ b/drivers/nvme/host/trace.h @@ -56,7 +56,7 @@ TRACE_EVENT(nvme_setup_cmd, __field(u8, fctype) __field(u16, cid) __field(u32, nsid) - __field(u64, metadata) + __field(bool, metadata) __array(u8, cdw10, 24) ), TP_fast_assign( @@ -66,13 +66,13 @@ TRACE_EVENT(nvme_setup_cmd, __entry->flags = cmd->common.flags; __entry->cid = cmd->common.command_id; __entry->nsid = le32_to_cpu(cmd->common.nsid); - __entry->metadata = le64_to_cpu(cmd->common.metadata); + __entry->metadata = !!blk_integrity_rq(req); __entry->fctype = cmd->fabrics.fctype; __assign_disk_name(__entry->disk, req->rq_disk); memcpy(__entry->cdw10, &cmd->common.cdw10, sizeof(__entry->cdw10)); ), - TP_printk("nvme%d: %sqid=%d, cmdid=%u, nsid=%u, flags=0x%x, meta=0x%llx, cmd=(%s %s)", + TP_printk("nvme%d: %sqid=%d, cmdid=%u, nsid=%u, flags=0x%x, meta=0x%x, cmd=(%s %s)", __entry->ctrl_id, __print_disk_name(__entry->disk), __entry->qid, __entry->cid, __entry->nsid, __entry->flags, __entry->metadata, -- cgit v1.2.3-58-ga151 From 5c912e679506ef72adb95616d2f56a8a1b079a3d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 21 May 2021 02:10:10 +0000 Subject: usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not set Gcc report build error as following when CONFIG_WWAN_CORE is not set: x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_disconnect': cdc-wdm.c:(.text+0xb2a): undefined reference to `wwan_remove_port' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_in_callback': cdc-wdm.c:(.text+0xf23): undefined reference to `wwan_port_rx' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_stop': cdc-wdm.c:(.text+0x127d): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx': cdc-wdm.c:(.text+0x12d9): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x13c1): undefined reference to `wwan_port_txoff' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_start': cdc-wdm.c:(.text+0x13e0): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x1431): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx_complete': cdc-wdm.c:(.text+0x14a4): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_create.cold': cdc-wdm.c:(.text.unlikely+0x209): undefined reference to `wwan_create_port' Using CONFIG_WWAN_CORE instead of CONFIG_WWAN to avoid build error. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Reported-by: Hulk Robot Reviewed-by: Loic Poulain Signed-off-by: Wei Yongjun Link: https://lore.kernel.org/r/20210521021010.2490930-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index fdf79bcf7eb0..35d5908b5478 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -824,7 +824,7 @@ static struct usb_class_driver wdm_class = { }; /* --- WWAN framework integration --- */ -#ifdef CONFIG_WWAN +#ifdef CONFIG_WWAN_CORE static int wdm_wwan_port_start(struct wwan_port *port) { struct wdm_device *desc = wwan_port_get_drvdata(port); @@ -963,11 +963,11 @@ static void wdm_wwan_rx(struct wdm_device *desc, int length) /* inbuf has been copied, it is safe to check for outstanding data */ schedule_work(&desc->service_outs_intr); } -#else /* CONFIG_WWAN */ +#else /* CONFIG_WWAN_CORE */ static void wdm_wwan_init(struct wdm_device *desc) {} static void wdm_wwan_deinit(struct wdm_device *desc) {} static void wdm_wwan_rx(struct wdm_device *desc, int length) {} -#endif /* CONFIG_WWAN */ +#endif /* CONFIG_WWAN_CORE */ /* --- error handling --- */ static void wdm_rxwork(struct work_struct *work) -- cgit v1.2.3-58-ga151 From f3a1a937f7b240be623d989c8553a6d01465d04f Mon Sep 17 00:00:00 2001 From: Vincent Palatin Date: Wed, 21 Jul 2021 11:25:16 +0200 Subject: Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem" This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd. While the patch was working as stated,ie preventing the L850-GL LTE modem from crashing on some U3 wake-ups due to a race condition between the host wake-up and the modem-side wake-up, when using the MBIM interface, this would force disabling the USB runtime PM on the device. The increased power consumption is significant for LTE laptops, and given that with decently recent modem firmwares, when the modem hits the bug, it automatically recovers (ie it drops from the bus, but automatically re-enumerates after less than half a second, rather than being stuck until a power cycle as it was doing with ancient firmware), for most people, the trade-off now seems in favor of re-enabling it by default. For people with access to the platform code, the bug can also be worked-around successfully by changing the USB3 LFPM polling off-time for the XHCI controller in the BIOS code. Signed-off-by: Vincent Palatin Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem") Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 6114cf83bb44..8239fe7129dd 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -501,10 +501,6 @@ static const struct usb_device_id usb_quirk_list[] = { /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, - /* Fibocom L850-GL LTE Modem */ - { USB_DEVICE(0x2cb7, 0x0007), .driver_info = - USB_QUIRK_IGNORE_REMOTE_WAKEUP }, - /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3-58-ga151 From 56f6f4c4eb2a710ec8878dd9373d3d2b2eb75f5c Mon Sep 17 00:00:00 2001 From: Bhaumik Bhatt Date: Fri, 16 Jul 2021 13:21:04 +0530 Subject: bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean Devices such as SDX24 do not have the provision for inband wake doorbell in the form of channel 127 and instead have a sideband GPIO for it. Newer devices such as SDX55 or SDX65 support inband wake method by default. Ensure the functionality is used based on this such that device wake stays held when a client driver uses mhi_device_get() API or the equivalent debugfs entry. Link: https://lore.kernel.org/r/1624560809-30610-1-git-send-email-bbhatt@codeaurora.org Fixes: e3e5e6508fc1 ("bus: mhi: pci_generic: No-Op for device_wake operations") Cc: stable@vger.kernel.org #5.12 Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bhaumik Bhatt Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20210716075106.49938-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/bus/mhi/pci_generic.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c index ca3bc40427f8..3396cb30ebec 100644 --- a/drivers/bus/mhi/pci_generic.c +++ b/drivers/bus/mhi/pci_generic.c @@ -32,6 +32,8 @@ * @edl: emergency download mode firmware path (if any) * @bar_num: PCI base address register to use for MHI MMIO register space * @dma_data_width: DMA transfer word size (32 or 64 bits) + * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead + * of inband wake support (such as sdx24) */ struct mhi_pci_dev_info { const struct mhi_controller_config *config; @@ -40,6 +42,7 @@ struct mhi_pci_dev_info { const char *edl; unsigned int bar_num; unsigned int dma_data_width; + bool sideband_wake; }; #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \ @@ -242,7 +245,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = { .edl = "qcom/sdx65m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, }; static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { @@ -251,7 +255,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { .edl = "qcom/sdx55m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, }; static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = { @@ -259,7 +264,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = { .edl = "qcom/prog_firehose_sdx24.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = true, }; static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = { @@ -301,7 +307,8 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = { .edl = "qcom/prog_firehose_sdx24.mbn", .config = &modem_quectel_em1xx_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = true, }; static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = { @@ -339,7 +346,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = { .edl = "qcom/sdx55m/edl.mbn", .config = &modem_foxconn_sdx55_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, }; static const struct pci_device_id mhi_pci_id_table[] = { @@ -640,9 +648,12 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) mhi_cntrl->status_cb = mhi_pci_status_cb; mhi_cntrl->runtime_get = mhi_pci_runtime_get; mhi_cntrl->runtime_put = mhi_pci_runtime_put; - mhi_cntrl->wake_get = mhi_pci_wake_get_nop; - mhi_cntrl->wake_put = mhi_pci_wake_put_nop; - mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop; + + if (info->sideband_wake) { + mhi_cntrl->wake_get = mhi_pci_wake_get_nop; + mhi_cntrl->wake_put = mhi_pci_wake_put_nop; + mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop; + } err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width)); if (err) -- cgit v1.2.3-58-ga151 From 546362a9ef2ef40b57c6605f14e88ced507f8dd0 Mon Sep 17 00:00:00 2001 From: Bhaumik Bhatt Date: Fri, 16 Jul 2021 13:21:05 +0530 Subject: bus: mhi: core: Validate channel ID when processing command completions MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element. Link: https://lore.kernel.org/r/1624558141-11045-1-git-send-email-bbhatt@codeaurora.org Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device") Cc: stable@vger.kernel.org #5.10 Reviewed-by: Hemant Kumar Reviewed-by: Manivannan Sadhasivam Reviewed-by: Jeffrey Hugo Signed-off-by: Bhaumik Bhatt Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20210716075106.49938-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/bus/mhi/core/main.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c index 22acde118bc3..fc9196f11cb7 100644 --- a/drivers/bus/mhi/core/main.c +++ b/drivers/bus/mhi/core/main.c @@ -773,11 +773,18 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl, cmd_pkt = mhi_to_virtual(mhi_ring, ptr); chan = MHI_TRE_GET_CMD_CHID(cmd_pkt); - mhi_chan = &mhi_cntrl->mhi_chan[chan]; - write_lock_bh(&mhi_chan->lock); - mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre); - complete(&mhi_chan->completion); - write_unlock_bh(&mhi_chan->lock); + + if (chan < mhi_cntrl->max_chan && + mhi_cntrl->mhi_chan[chan].configured) { + mhi_chan = &mhi_cntrl->mhi_chan[chan]; + write_lock_bh(&mhi_chan->lock); + mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre); + complete(&mhi_chan->completion); + write_unlock_bh(&mhi_chan->lock); + } else { + dev_err(&mhi_cntrl->mhi_dev->dev, + "Completion packet for invalid channel ID: %d\n", chan); + } mhi_del_ring_element(mhi_cntrl, mhi_ring); } -- cgit v1.2.3-58-ga151 From b8a97f2a65388394f433bf0730293a94f7d49046 Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Fri, 16 Jul 2021 13:21:06 +0530 Subject: bus: mhi: pci_generic: Fix inbound IPCR channel The qrtr-mhi client driver assumes that inbound buffers are automatically allocated and queued by the MHI core, but this doesn't happen for mhi pci devices since IPCR inbound channel is not flagged with auto_queue, causing unusable IPCR (qrtr) feature. Fix that. Link: https://lore.kernel.org/r/1625736749-24947-1-git-send-email-loic.poulain@linaro.org [mani: fixed a spelling mistake in commit description] Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems") Cc: stable@vger.kernel.org #5.10 Reviewed-by: Hemant kumar Reviewed-by: Manivannan Sadhasivam Signed-off-by: Loic Poulain Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20210716075106.49938-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/bus/mhi/pci_generic.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c index 3396cb30ebec..4dd1077354af 100644 --- a/drivers/bus/mhi/pci_generic.c +++ b/drivers/bus/mhi/pci_generic.c @@ -75,6 +75,22 @@ struct mhi_pci_dev_info { .doorbell_mode_switch = false, \ } +#define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count, ev_ring) \ + { \ + .num = ch_num, \ + .name = ch_name, \ + .num_elements = el_count, \ + .event_ring = ev_ring, \ + .dir = DMA_FROM_DEVICE, \ + .ee_mask = BIT(MHI_EE_AMSS), \ + .pollcfg = 0, \ + .doorbell = MHI_DB_BRST_DISABLE, \ + .lpm_notify = false, \ + .offload_channel = false, \ + .doorbell_mode_switch = false, \ + .auto_queue = true, \ + } + #define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \ { \ .num_elements = el_count, \ @@ -213,7 +229,7 @@ static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = { MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0), MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0), MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0), - MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0), + MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0), MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0), MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2), -- cgit v1.2.3-58-ga151 From 4afa0c22eed33cfe0c590742387f0d16f32412f3 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 13 Jul 2021 12:34:38 +0300 Subject: driver core: auxiliary bus: Fix memory leak when driver_register() fail If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register() Fixes: 7de3697e9cbd4 ("Add auxiliary bus support") Reviewed-by: Dan Williams Cc: stable Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20210713093438.3173-1-peter.ujfalusi@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/auxiliary.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/auxiliary.c b/drivers/base/auxiliary.c index adc199dfba3c..6a30264ab2ba 100644 --- a/drivers/base/auxiliary.c +++ b/drivers/base/auxiliary.c @@ -231,6 +231,8 @@ EXPORT_SYMBOL_GPL(auxiliary_find_device); int __auxiliary_driver_register(struct auxiliary_driver *auxdrv, struct module *owner, const char *modname) { + int ret; + if (WARN_ON(!auxdrv->probe) || WARN_ON(!auxdrv->id_table)) return -EINVAL; @@ -246,7 +248,11 @@ int __auxiliary_driver_register(struct auxiliary_driver *auxdrv, auxdrv->driver.bus = &auxiliary_bus_type; auxdrv->driver.mod_name = modname; - return driver_register(&auxdrv->driver); + ret = driver_register(&auxdrv->driver); + if (ret) + kfree(auxdrv->driver.name); + + return ret; } EXPORT_SYMBOL_GPL(__auxiliary_driver_register); -- cgit v1.2.3-58-ga151 From e9a72f874d5b95cef0765bafc56005a50f72c5fe Mon Sep 17 00:00:00 2001 From: Sayanta Pattanayak Date: Tue, 20 Jul 2021 17:17:40 +0100 Subject: r8169: Avoid duplicate sysfs entry creation error When registering the MDIO bus for a r8169 device, we use the PCI bus/device specifier as a (seemingly) unique device identifier. However the very same BDF number can be used on another PCI segment, which makes the driver fail probing: [ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003) [ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700' .... [ 27.684858] libphy: mii_bus r8169-700 failed to register [ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22 Add the segment number to the device name to make it more unique. This fixes operation on ARM N1SDP boards, with two boards connected together to form an SMP system, and all on-board devices showing up twice, just on different PCI segments. A similar issue would occur on large systems with many PCI slots and multiple RTL8169 NICs. Fixes: f1e911d5d0dfd ("r8169: add basic phylib support") Signed-off-by: Sayanta Pattanayak [Andre: expand commit message, use pci_domain_nr()] Signed-off-by: Andre Przywara Acked-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index f744557c33a3..c7af5bc3b8af 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -5084,7 +5084,8 @@ static int r8169_mdio_register(struct rtl8169_private *tp) new_bus->priv = tp; new_bus->parent = &pdev->dev; new_bus->irq[0] = PHY_MAC_INTERRUPT; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "r8169-%x", pci_dev_id(pdev)); + snprintf(new_bus->id, MII_BUS_ID_SIZE, "r8169-%x-%x", + pci_domain_nr(pdev->bus), pci_dev_id(pdev)); new_bus->read = r8169_mdio_read_reg; new_bus->write = r8169_mdio_write_reg; -- cgit v1.2.3-58-ga151 From 0077a50082729c3f9ea2836f59e35d9b7dacfb12 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 21 Jul 2021 12:16:26 +0200 Subject: rbd: resurrect setting of disk->private_data in rbd_init_disk() rbd_open() and rbd_release() expect that disk->private_data is set to rbd_dev. Otherwise we hit a NULL pointer dereference when mapping the image. URL: https://tracker.ceph.com/issues/51759 Fixes: 195b1956b85b ("rbd: use blk_mq_alloc_disk and blk_cleanup_disk") Signed-off-by: Ilya Dryomov Reviewed-by: Christoph Hellwig --- drivers/block/rbd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 784797fa9a53..90b947c96402 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4943,6 +4943,7 @@ static int rbd_init_disk(struct rbd_device *rbd_dev) disk->minors = RBD_MINORS_PER_MAJOR; } disk->fops = &rbd_bd_ops; + disk->private_data = rbd_dev; blk_queue_flag_set(QUEUE_FLAG_NONROT, q); /* QUEUE_FLAG_ADD_RANDOM is off by default for blk-mq */ -- cgit v1.2.3-58-ga151 From aaeb7bb061be545251606f4d9c82d710ca2a7c8e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 21 Jul 2021 10:00:11 +0200 Subject: nvme: set the PRACT bit when using Write Zeroes with T10 PI When using Write Zeroes on a namespace that has protection information enabled they behavior without the PRACT bit counter-intuitive and will generally lead to validation failures when reading the written blocks. Fix this by always setting the PRACT bit that generates matching PI data on the fly. Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command") Signed-off-by: Christoph Hellwig Reviewed-by: Keith Busch Reviewed-by: Martin K. Petersen --- drivers/nvme/host/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 17c05a4595f0..dfd9dec0c1f6 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -900,7 +900,10 @@ static inline blk_status_t nvme_setup_write_zeroes(struct nvme_ns *ns, cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req))); cmnd->write_zeroes.length = cpu_to_le16((blk_rq_bytes(req) >> ns->lba_shift) - 1); - cmnd->write_zeroes.control = 0; + if (nvme_ns_has_pi(ns)) + cmnd->write_zeroes.control = cpu_to_le16(NVME_RW_PRINFO_PRACT); + else + cmnd->write_zeroes.control = 0; return BLK_STS_OK; } -- cgit v1.2.3-58-ga151 From e64daad660a0c9ace3acdc57099fffe5ed83f977 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 16 Jul 2021 14:44:07 +0300 Subject: driver core: Prevent warning when removing a device link from unregistered consumer sysfs_remove_link() causes a warning if the parent directory does not exist. That can happen if the device link consumer has not been registered. So do not attempt sysfs_remove_link() in that case. Fixes: 287905e68dd29 ("driver core: Expose device link details in sysfs") Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # 5.9+ Reviewed-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/20210716114408.17320-2-adrian.hunter@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index cadcade65825..f6360490a4a3 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -574,8 +574,10 @@ static void devlink_remove_symlinks(struct device *dev, return; } - snprintf(buf, len, "supplier:%s:%s", dev_bus_name(sup), dev_name(sup)); - sysfs_remove_link(&con->kobj, buf); + if (device_is_registered(con)) { + snprintf(buf, len, "supplier:%s:%s", dev_bus_name(sup), dev_name(sup)); + sysfs_remove_link(&con->kobj, buf); + } snprintf(buf, len, "consumer:%s:%s", dev_bus_name(con), dev_name(con)); sysfs_remove_link(&sup->kobj, buf); kfree(buf); -- cgit v1.2.3-58-ga151 From 6e0b6528d783b2b87bd9e1bea97cf4dac87540d7 Mon Sep 17 00:00:00 2001 From: Jason Ekstrand Date: Tue, 20 Jul 2021 13:21:08 -0500 Subject: drm/i915: Correct the docs for intel_engine_cmd_parser In 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser""), the parameters to intel_engine_cmd_parser() were altered without updating the docs, causing Fi.CI.DOCS to start failing. Fixes: c9d9fdbc108a ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"") Signed-off-by: Jason Ekstrand Reviewed-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net Signed-off-by: Rodrigo Vivi [Added 'Fixes:' tag and corrected the hash for the ancestor] (cherry picked from commit 15eb083bdb561bb4862cd04cd0523e55483e877e) Signed-off-by: Rodrigo Vivi [Updated Fixes tag to match fixes branch] --- drivers/gpu/drm/i915/i915_cmd_parser.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 00ec618d0159..a3b4d99d64b9 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -1416,9 +1416,7 @@ static unsigned long *alloc_whitelist(u32 batch_length) * @batch_offset: byte offset in the batch at which execution starts * @batch_length: length of the commands in batch_obj * @shadow: validated copy of the batch buffer in question - * @jump_whitelist: buffer preallocated with intel_engine_cmd_parser_alloc_jump_whitelist() - * @shadow_map: mapping to @shadow vma - * @batch_map: mapping to @batch vma + * @trampoline: true if we need to trampoline into privileged execution * * Parses the specified batch buffer looking for privilege violations as * described in the overview. -- cgit v1.2.3-58-ga151 From bb55362bd6976631b662ca712779b6532d8de0a6 Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Tue, 20 Jul 2021 19:34:39 -0700 Subject: ibmvnic: Remove the proper scrq flush Commit 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") intended to remove the call to ibmvnic_tx_scrq_flush() when the ->resetting flag is true and was tested that way. But during the final rebase to net-next, the hunk got applied to a block few lines below (which happened to have the same diff context) and the wrong call to ibmvnic_tx_scrq_flush() got removed. Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring the one that was incorrectly removed. Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") Reported-by: Dany Madden Signed-off-by: Sukadev Bhattiprolu Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index ed77191d19f4..a775c69e4fd7 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1731,7 +1731,6 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) tx_send_failed++; tx_dropped++; ret = NETDEV_TX_OK; - ibmvnic_tx_scrq_flush(adapter, tx_scrq); goto out; } @@ -1753,6 +1752,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) dev_kfree_skb_any(skb); tx_send_failed++; tx_dropped++; + ibmvnic_tx_scrq_flush(adapter, tx_scrq); ret = NETDEV_TX_OK; goto out; } -- cgit v1.2.3-58-ga151 From 161dcc02428858fe338b7493158ed6f5fc2a8f26 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 21 Jul 2021 17:19:32 +0200 Subject: net: ixp46x: fix ptp build failure The rework of the ixp46x cpu detection left the network driver in a half broken state: drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init': drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function) 290 | (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT; | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/xscale/ptp_ixp46x.c: At top level: drivers/net/ethernet/xscale/ptp_ixp46x.c:323:1: error: data definition has no type or storage class [-Werror] 323 | module_init(ptp_ixp_init); I have patches to complete the transition for a future release, but for the moment, add the missing include statements to get it to build again. Fixes: 09aa9aabdcc4 ("soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/xscale/ptp_ixp46x.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/xscale/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c index 99d4d9439d05..a6fb88fd42f7 100644 --- a/drivers/net/ethernet/xscale/ptp_ixp46x.c +++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include "ixp46x_ts.h" -- cgit v1.2.3-58-ga151 From d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e Mon Sep 17 00:00:00 2001 From: John Keeping Date: Wed, 21 Jul 2021 17:17:45 +0100 Subject: USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick Add the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by: John Keeping Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index af286240807e..3c80bfbf3bec 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -155,6 +155,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */ { USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ + { USB_DEVICE(0x10C4, 0x8A5B) }, /* CEL EM3588 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ -- cgit v1.2.3-58-ga151 From ec3102dc6b36c692104c4a0546d4119de59a3bc1 Mon Sep 17 00:00:00 2001 From: Victor Lu Date: Thu, 24 Jun 2021 11:05:42 -0400 Subject: drm/amd/display: Fix comparison error in dcn21 DML [why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: Dmytro Laktyushkin Reviewed-by: Yongqiang Sun Acked-by: Rodrigo Siqueira Signed-off-by: Victor Lu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c index c26e742e8137..d25a7d38d21f 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c @@ -4889,7 +4889,7 @@ void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l } } while ((locals->PrefetchSupported[i][j] != true || locals->VRatioInPrefetchSupported[i][j] != true) && (mode_lib->vba.NextMaxVStartup != mode_lib->vba.MaxMaxVStartup[0][0] - || mode_lib->vba.NextPrefetchMode < mode_lib->vba.MaxPrefetchMode)); + || mode_lib->vba.NextPrefetchMode <= mode_lib->vba.MaxPrefetchMode)); if (locals->PrefetchSupported[i][j] == true && locals->VRatioInPrefetchSupported[i][j] == true) { mode_lib->vba.BandwidthAvailableForImmediateFlip = locals->ReturnBWPerState[i][0]; -- cgit v1.2.3-58-ga151 From 32f1d0cfc3444fb44ff1dba10d28e479690bdd3e Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Wed, 23 Jun 2021 15:48:02 -0400 Subject: drm/amd/display: implement workaround for riommu related hang [Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: Rodrigo Siqueira Signed-off-by: Eric Yang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h | 4 +++- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c | 18 ++++++++++++++++++ drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h | 1 + drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c | 2 +- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 3 +++ .../gpu/drm/amd/display/dc/inc/hw_sequencer_private.h | 1 + 6 files changed, 27 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h index df6539e4c730..0464a8f3db3c 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h @@ -636,6 +636,7 @@ struct dce_hwseq_registers { uint32_t ODM_MEM_PWR_CTRL3; uint32_t DMU_MEM_PWR_CNTL; uint32_t MMHUBBUB_MEM_PWR_CNTL; + uint32_t DCHUBBUB_ARB_HOSTVM_CNTL; }; /* set field name */ #define HWS_SF(blk_name, reg_name, field_name, post_fix)\ @@ -1110,7 +1111,8 @@ struct dce_hwseq_registers { type DOMAIN_POWER_FORCEON;\ type DOMAIN_POWER_GATE;\ type DOMAIN_PGFSM_PWR_STATUS;\ - type HPO_HDMISTREAMCLK_G_GATE_DIS; + type HPO_HDMISTREAMCLK_G_GATE_DIS;\ + type DISABLE_HOSTVM_FORCE_ALLOW_PSTATE; struct dce_hwseq_shift { HWSEQ_REG_FIELD_LIST(uint8_t) diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c index 836864a5a5dc..6ac6faf0c533 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c @@ -47,6 +47,7 @@ #include "dce/dmub_outbox.h" #include "dc_link_dp.h" #include "inc/link_dpcd.h" +#include "dcn10/dcn10_hw_sequencer.h" #define DC_LOGGER_INIT(logger) @@ -594,3 +595,20 @@ bool dcn31_is_abm_supported(struct dc *dc, } return false; } + +static void apply_riommu_invalidation_wa(struct dc *dc) +{ + struct dce_hwseq *hws = dc->hwseq; + + if (!hws->wa.early_riommu_invalidation) + return; + + REG_UPDATE(DCHUBBUB_ARB_HOSTVM_CNTL, DISABLE_HOSTVM_FORCE_ALLOW_PSTATE, 0); +} + +void dcn31_init_pipes(struct dc *dc, struct dc_state *context) +{ + dcn10_init_pipes(dc, context); + apply_riommu_invalidation_wa(dc); + +} diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h index ff72f0fdd5be..40dfebe78fdd 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h @@ -52,5 +52,6 @@ void dcn31_reset_hw_ctx_wrap( struct dc_state *context); bool dcn31_is_abm_supported(struct dc *dc, struct dc_state *context, struct dc_stream_state *stream); +void dcn31_init_pipes(struct dc *dc, struct dc_state *context); #endif /* __DC_HWSS_DCN31_H__ */ diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c index e3048f8827d2..de74f62f96cd 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c @@ -104,7 +104,7 @@ static const struct hw_sequencer_funcs dcn31_funcs = { }; static const struct hwseq_private_funcs dcn31_private_funcs = { - .init_pipes = dcn10_init_pipes, + .init_pipes = dcn31_init_pipes, .update_plane_addr = dcn20_update_plane_addr, .plane_atomic_disconnect = dcn10_plane_atomic_disconnect, .update_mpcc = dcn20_update_mpcc, diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c index c67bc9544f5d..3fe0aac4aaa6 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c @@ -741,6 +741,7 @@ static const struct dccg_mask dccg_mask = { #define HWSEQ_DCN31_REG_LIST()\ SR(DCHUBBUB_GLOBAL_TIMER_CNTL), \ + SR(DCHUBBUB_ARB_HOSTVM_CNTL), \ SR(DIO_MEM_PWR_CTRL), \ SR(ODM_MEM_PWR_CTRL3), \ SR(DMU_MEM_PWR_CNTL), \ @@ -801,6 +802,7 @@ static const struct dce_hwseq_registers hwseq_reg = { #define HWSEQ_DCN31_MASK_SH_LIST(mask_sh)\ HWSEQ_DCN_MASK_SH_LIST(mask_sh), \ HWS_SF(, DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_REFDIV, mask_sh), \ + HWS_SF(, DCHUBBUB_ARB_HOSTVM_CNTL, DISABLE_HOSTVM_FORCE_ALLOW_PSTATE, mask_sh), \ HWS_SF(, DOMAIN0_PG_CONFIG, DOMAIN_POWER_FORCEON, mask_sh), \ HWS_SF(, DOMAIN0_PG_CONFIG, DOMAIN_POWER_GATE, mask_sh), \ HWS_SF(, DOMAIN1_PG_CONFIG, DOMAIN_POWER_FORCEON, mask_sh), \ @@ -1299,6 +1301,7 @@ static struct dce_hwseq *dcn31_hwseq_create( hws->regs = &hwseq_reg; hws->shifts = &hwseq_shift; hws->masks = &hwseq_mask; + hws->wa.early_riommu_invalidation = true; } return hws; } diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h index f7f7e4fff0c2..082549f75978 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h @@ -41,6 +41,7 @@ struct dce_hwseq_wa { bool DEGVIDCN10_254; bool DEGVIDCN21; bool disallow_self_refresh_during_multi_plane_transition; + bool early_riommu_invalidation; }; struct hwseq_wa_state { -- cgit v1.2.3-58-ga151 From d7940911fc0754d99b208f0e3098762d39f403a0 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Wed, 7 Jul 2021 13:19:14 -0400 Subject: drm/amd/display: Fix max vstartup calculation for modes with borders [Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin Acked-by: Rodrigo Siqueira Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c index 1b05a37b674d..98d21fb374b1 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c @@ -2093,8 +2093,10 @@ int dcn20_populate_dml_pipes_from_context( - timing->v_border_bottom; pipes[pipe_cnt].pipe.dest.htotal = timing->h_total; pipes[pipe_cnt].pipe.dest.vtotal = v_total; - pipes[pipe_cnt].pipe.dest.hactive = timing->h_addressable; - pipes[pipe_cnt].pipe.dest.vactive = timing->v_addressable; + pipes[pipe_cnt].pipe.dest.hactive = + timing->h_addressable + timing->h_border_left + timing->h_border_right; + pipes[pipe_cnt].pipe.dest.vactive = + timing->v_addressable + timing->v_border_top + timing->v_border_bottom; pipes[pipe_cnt].pipe.dest.interlaced = timing->flags.INTERLACE; pipes[pipe_cnt].pipe.dest.pixel_rate_mhz = timing->pix_clk_100hz/10000.0; if (timing->timing_3d_format == TIMING_3D_FORMAT_HW_FRAME_PACKING) -- cgit v1.2.3-58-ga151 From f30f55158728b4423cf1caf666dd2e2c1943dc19 Mon Sep 17 00:00:00 2001 From: Bindu Ramamurthy Date: Thu, 27 May 2021 10:11:32 -0400 Subject: drm/amd/display: Populate socclk entries for dcn3.02/3.03 [Why] Initialize socclk entries in bandwidth params for dcn302, dcn303. [How] Fetch the sockclk values from smu for the DPM levels and for the DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li Acked-by: Rodrigo Siqueira Signed-off-by: Bindu Ramamurthy Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c | 4 ++++ drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c | 7 +++++-- drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c | 7 +++++-- 3 files changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c index 513676a6f52b..af7004b770ae 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c @@ -190,6 +190,10 @@ void dcn3_init_clocks(struct clk_mgr *clk_mgr_base) &clk_mgr_base->bw_params->clk_table.entries[0].dtbclk_mhz, &num_levels); + /* SOCCLK */ + dcn3_init_single_clock(clk_mgr, PPCLK_SOCCLK, + &clk_mgr_base->bw_params->clk_table.entries[0].socclk_mhz, + &num_levels); // DPREFCLK ??? /* DISPCLK */ diff --git a/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c b/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c index 16a75ba0ca82..d65c097333a4 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c @@ -1399,10 +1399,13 @@ void dcn302_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param dcn3_02_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz; dcn3_02_soc.clock_limits[i].phyclk_mhz = max_phyclk_mhz; dcn3_02_soc.clock_limits[i].dtbclk_mhz = dcn3_02_soc.clock_limits[0].dtbclk_mhz; + if (!bw_params->clk_table.entries[i].socclk_mhz && i > 0) + dcn3_02_soc.clock_limits[i].socclk_mhz = dcn3_02_soc.clock_limits[i-1].socclk_mhz; + else + dcn3_02_soc.clock_limits[i].socclk_mhz = bw_params->clk_table.entries[i].socclk_mhz; /* These clocks cannot come from bw_params, always fill from dcn3_02_soc[1] */ - /* FCLK, PHYCLK_D18, SOCCLK, DSCCLK */ + /* FCLK, PHYCLK_D18, DSCCLK */ dcn3_02_soc.clock_limits[i].phyclk_d18_mhz = dcn3_02_soc.clock_limits[0].phyclk_d18_mhz; - dcn3_02_soc.clock_limits[i].socclk_mhz = dcn3_02_soc.clock_limits[0].socclk_mhz; dcn3_02_soc.clock_limits[i].dscclk_mhz = dcn3_02_soc.clock_limits[0].dscclk_mhz; } /* re-init DML with updated bb */ diff --git a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c index 34b89464ae02..f8b84722a389 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c @@ -1327,10 +1327,13 @@ void dcn303_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param dcn3_03_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz; dcn3_03_soc.clock_limits[i].phyclk_mhz = max_phyclk_mhz; dcn3_03_soc.clock_limits[i].dtbclk_mhz = dcn3_03_soc.clock_limits[0].dtbclk_mhz; + if (!bw_params->clk_table.entries[i].socclk_mhz && i > 0) + dcn3_03_soc.clock_limits[i].socclk_mhz = dcn3_03_soc.clock_limits[i-1].socclk_mhz; + else + dcn3_03_soc.clock_limits[i].socclk_mhz = bw_params->clk_table.entries[i].socclk_mhz; /* These clocks cannot come from bw_params, always fill from dcn3_03_soc[1] */ - /* FCLK, PHYCLK_D18, SOCCLK, DSCCLK */ + /* FCLK, PHYCLK_D18, DSCCLK */ dcn3_03_soc.clock_limits[i].phyclk_d18_mhz = dcn3_03_soc.clock_limits[0].phyclk_d18_mhz; - dcn3_03_soc.clock_limits[i].socclk_mhz = dcn3_03_soc.clock_limits[0].socclk_mhz; dcn3_03_soc.clock_limits[i].dscclk_mhz = dcn3_03_soc.clock_limits[0].dscclk_mhz; } /* re-init DML with updated bb */ -- cgit v1.2.3-58-ga151 From b0364fa4fc045685f827ea34c0149c953d0240bd Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Wed, 7 Jul 2021 16:38:57 -0400 Subject: drm/amd/display: Query VCO frequency from register for DCN3.1 [Why] Hardcoding the VCO frequency isn't correct since we don't own or control the value. In the case where the hardcode is also missing we can't lightup display. [How] Query from the CLK register instead. Update the DFS frequency to be able to compute the VCO frequency. Reviewed-by: Eric Yang Acked-by: Rodrigo Siqueira Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c | 43 ++++++++++++++++- .../amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.h | 54 ---------------------- 2 files changed, 42 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c index 7b7d884d58be..d15c628a2ab0 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c @@ -48,6 +48,21 @@ #include "dc_dmub_srv.h" +#include "yellow_carp_offset.h" + +#define regCLK1_CLK_PLL_REQ 0x0237 +#define regCLK1_CLK_PLL_REQ_BASE_IDX 0 + +#define CLK1_CLK_PLL_REQ__FbMult_int__SHIFT 0x0 +#define CLK1_CLK_PLL_REQ__PllSpineDiv__SHIFT 0xc +#define CLK1_CLK_PLL_REQ__FbMult_frac__SHIFT 0x10 +#define CLK1_CLK_PLL_REQ__FbMult_int_MASK 0x000001FFL +#define CLK1_CLK_PLL_REQ__PllSpineDiv_MASK 0x0000F000L +#define CLK1_CLK_PLL_REQ__FbMult_frac_MASK 0xFFFF0000L + +#define REG(reg_name) \ + (CLK_BASE.instance[0].segment[reg ## reg_name ## _BASE_IDX] + reg ## reg_name) + #define TO_CLK_MGR_DCN31(clk_mgr)\ container_of(clk_mgr, struct clk_mgr_dcn31, base) @@ -229,7 +244,32 @@ static void dcn31_update_clocks(struct clk_mgr *clk_mgr_base, static int get_vco_frequency_from_reg(struct clk_mgr_internal *clk_mgr) { - return 0; + /* get FbMult value */ + struct fixed31_32 pll_req; + unsigned int fbmult_frac_val = 0; + unsigned int fbmult_int_val = 0; + + /* + * Register value of fbmult is in 8.16 format, we are converting to 31.32 + * to leverage the fix point operations available in driver + */ + + REG_GET(CLK1_CLK_PLL_REQ, FbMult_frac, &fbmult_frac_val); /* 16 bit fractional part*/ + REG_GET(CLK1_CLK_PLL_REQ, FbMult_int, &fbmult_int_val); /* 8 bit integer part */ + + pll_req = dc_fixpt_from_int(fbmult_int_val); + + /* + * since fractional part is only 16 bit in register definition but is 32 bit + * in our fix point definiton, need to shift left by 16 to obtain correct value + */ + pll_req.value |= fbmult_frac_val << 16; + + /* multiply by REFCLK period */ + pll_req = dc_fixpt_mul_int(pll_req, clk_mgr->dfs_ref_freq_khz); + + /* integer part is now VCO frequency in kHz */ + return dc_fixpt_floor(pll_req); } static void dcn31_enable_pme_wa(struct clk_mgr *clk_mgr_base) @@ -592,6 +632,7 @@ void dcn31_clk_mgr_construct( clk_mgr->base.dprefclk_ss_percentage = 0; clk_mgr->base.dprefclk_ss_divider = 1000; clk_mgr->base.ss_on_dprefclk = false; + clk_mgr->base.dfs_ref_freq_khz = 48000; clk_mgr->smu_wm_set.wm_set = (struct dcn31_watermarks *)dm_helpers_allocate_gpu_mem( clk_mgr->base.base.ctx, diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.h index cc21cf75eafd..f8f100535526 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.h +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.h @@ -27,60 +27,6 @@ #define __DCN31_CLK_MGR_H__ #include "clk_mgr_internal.h" -//CLK1_CLK_PLL_REQ -#ifndef CLK11_CLK1_CLK_PLL_REQ__FbMult_int__SHIFT -#define CLK11_CLK1_CLK_PLL_REQ__FbMult_int__SHIFT 0x0 -#define CLK11_CLK1_CLK_PLL_REQ__PllSpineDiv__SHIFT 0xc -#define CLK11_CLK1_CLK_PLL_REQ__FbMult_frac__SHIFT 0x10 -#define CLK11_CLK1_CLK_PLL_REQ__FbMult_int_MASK 0x000001FFL -#define CLK11_CLK1_CLK_PLL_REQ__PllSpineDiv_MASK 0x0000F000L -#define CLK11_CLK1_CLK_PLL_REQ__FbMult_frac_MASK 0xFFFF0000L -//CLK1_CLK0_DFS_CNTL -#define CLK11_CLK1_CLK0_DFS_CNTL__CLK0_DIVIDER__SHIFT 0x0 -#define CLK11_CLK1_CLK0_DFS_CNTL__CLK0_DIVIDER_MASK 0x0000007FL -/*DPREF clock related*/ -#define CLK0_CLK3_DFS_CNTL__CLK3_DIVIDER__SHIFT 0x0 -#define CLK0_CLK3_DFS_CNTL__CLK3_DIVIDER_MASK 0x0000007FL -#define CLK1_CLK3_DFS_CNTL__CLK3_DIVIDER__SHIFT 0x0 -#define CLK1_CLK3_DFS_CNTL__CLK3_DIVIDER_MASK 0x0000007FL -#define CLK2_CLK3_DFS_CNTL__CLK3_DIVIDER__SHIFT 0x0 -#define CLK2_CLK3_DFS_CNTL__CLK3_DIVIDER_MASK 0x0000007FL -#define CLK3_CLK3_DFS_CNTL__CLK3_DIVIDER__SHIFT 0x0 -#define CLK3_CLK3_DFS_CNTL__CLK3_DIVIDER_MASK 0x0000007FL - -//CLK3_0_CLK3_CLK_PLL_REQ -#define CLK3_0_CLK3_CLK_PLL_REQ__FbMult_int__SHIFT 0x0 -#define CLK3_0_CLK3_CLK_PLL_REQ__PllSpineDiv__SHIFT 0xc -#define CLK3_0_CLK3_CLK_PLL_REQ__FbMult_frac__SHIFT 0x10 -#define CLK3_0_CLK3_CLK_PLL_REQ__FbMult_int_MASK 0x000001FFL -#define CLK3_0_CLK3_CLK_PLL_REQ__PllSpineDiv_MASK 0x0000F000L -#define CLK3_0_CLK3_CLK_PLL_REQ__FbMult_frac_MASK 0xFFFF0000L - -#define mmCLK0_CLK3_DFS_CNTL 0x16C60 -#define mmCLK00_CLK0_CLK3_DFS_CNTL 0x16C60 -#define mmCLK01_CLK0_CLK3_DFS_CNTL 0x16E60 -#define mmCLK02_CLK0_CLK3_DFS_CNTL 0x17060 -#define mmCLK03_CLK0_CLK3_DFS_CNTL 0x17260 - -#define mmCLK0_CLK_PLL_REQ 0x16C10 -#define mmCLK00_CLK0_CLK_PLL_REQ 0x16C10 -#define mmCLK01_CLK0_CLK_PLL_REQ 0x16E10 -#define mmCLK02_CLK0_CLK_PLL_REQ 0x17010 -#define mmCLK03_CLK0_CLK_PLL_REQ 0x17210 - -#define mmCLK1_CLK_PLL_REQ 0x1B00D -#define mmCLK10_CLK1_CLK_PLL_REQ 0x1B00D -#define mmCLK11_CLK1_CLK_PLL_REQ 0x1B20D -#define mmCLK12_CLK1_CLK_PLL_REQ 0x1B40D -#define mmCLK13_CLK1_CLK_PLL_REQ 0x1B60D - -#define mmCLK2_CLK_PLL_REQ 0x17E0D - -/*AMCLK*/ -#define mmCLK11_CLK1_CLK0_DFS_CNTL 0x1B23F -#define mmCLK11_CLK1_CLK_PLL_REQ 0x1B20D -#endif - struct dcn31_watermarks; struct dcn31_smu_watermark_set { -- cgit v1.2.3-58-ga151 From a8e380fd8d71493623c94511f75e81786cffa223 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Thu, 8 Jul 2021 12:59:59 -0400 Subject: drm/amd/display: Update bounding box for DCN3.1 [Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang Acked-by: Rodrigo Siqueira Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c index 3fe0aac4aaa6..38c010afade1 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c @@ -220,6 +220,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_1_soc = { .sr_exit_z8_time_us = 402.0, .sr_enter_plus_exit_z8_time_us = 520.0, .writeback_latency_us = 12.0, + .dram_channel_width_bytes = 4, .round_trip_ping_latency_dcfclk_cycles = 106, .urgent_latency_pixel_data_only_us = 4.0, .urgent_latency_pixel_mixed_with_vm_data_us = 4.0, -- cgit v1.2.3-58-ga151 From 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Mon Sep 17 00:00:00 2001 From: Camille Cho Date: Thu, 8 Jul 2021 18:28:37 +0800 Subject: drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac Acked-by: Rodrigo Siqueira Signed-off-by: Camille Cho Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 6da226bf11d5..12066f5a53fc 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -4914,9 +4914,7 @@ bool dc_link_set_default_brightness_aux(struct dc_link *link) { uint32_t default_backlight; - if (link && - (link->dpcd_sink_ext_caps.bits.hdr_aux_backlight_control == 1 || - link->dpcd_sink_ext_caps.bits.sdr_aux_backlight_control == 1)) { + if (link && link->dpcd_sink_ext_caps.bits.oled == 1) { if (!dc_link_read_default_bl_aux(link, &default_backlight)) default_backlight = 150000; // if < 5 nits or > 5000, it might be wrong readback -- cgit v1.2.3-58-ga151 From 6580b28e0c734cea2f829e97827005c311293cb7 Mon Sep 17 00:00:00 2001 From: Mikita Lipski Date: Mon, 14 Jun 2021 20:21:42 -0400 Subject: drm/amd/display: Remove MALL function from DCN3.1 [why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas Acked-by: Rodrigo Siqueira Signed-off-by: Mikita Lipski Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c index de74f62f96cd..aaf2dbd095fe 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c @@ -93,7 +93,6 @@ static const struct hw_sequencer_funcs dcn31_funcs = { .set_flip_control_gsl = dcn20_set_flip_control_gsl, .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync, .calc_vupdate_position = dcn10_calc_vupdate_position, - .apply_idle_power_optimizations = dcn30_apply_idle_power_optimizations, .set_backlight_level = dcn21_set_backlight_level, .set_abm_immediate_disable = dcn21_set_abm_immediate_disable, .set_pipe = dcn21_set_pipe, -- cgit v1.2.3-58-ga151 From 0f984c942cd1703b26dc01351dc47b0c93bc32f3 Mon Sep 17 00:00:00 2001 From: Nevenko Stupar Date: Fri, 9 Jul 2021 13:05:11 -0400 Subject: drm/amd/display: Line Buffer changes DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei Acked-by: Rodrigo Siqueira Signed-off-by: Nevenko Stupar Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c | 7 ++++++- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c | 16 ---------------- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.h | 3 +-- drivers/gpu/drm/amd/display/dc/inc/hw/transform.h | 3 +++ 4 files changed, 10 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c index 673b93f4fea5..cb9767ddf93d 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c @@ -217,6 +217,8 @@ static void dpp1_dscl_set_lb( const struct line_buffer_params *lb_params, enum lb_memory_config mem_size_config) { + uint32_t max_partitions = 63; /* Currently hardcoded on all ASICs before DCN 3.2 */ + /* LB */ if (dpp->base.caps->dscl_data_proc_format == DSCL_DATA_PRCESSING_FIXED_FORMAT) { /* DSCL caps: pixel data processed in fixed format */ @@ -239,9 +241,12 @@ static void dpp1_dscl_set_lb( LB_DATA_FORMAT__ALPHA_EN, lb_params->alpha_en); /* Alpha enable */ } + if (dpp->base.caps->max_lb_partitions == 31) + max_partitions = 31; + REG_SET_2(LB_MEMORY_CTRL, 0, MEMORY_CONFIG, mem_size_config, - LB_MAX_PARTITIONS, 63); + LB_MAX_PARTITIONS, max_partitions); } static const uint16_t *dpp1_dscl_get_filter_coeffs_64p(int taps, struct fixed31_32 ratio) diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c index 2140b75540cf..23a52d47e61c 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c @@ -383,13 +383,6 @@ bool dpp3_get_optimal_number_of_taps( int min_taps_y, min_taps_c; enum lb_memory_config lb_config; - /* Some ASICs does not support FP16 scaling, so we reject modes require this*/ - if (scl_data->viewport.width != scl_data->h_active && - scl_data->viewport.height != scl_data->v_active && - dpp->caps->dscl_data_proc_format == DSCL_DATA_PRCESSING_FIXED_FORMAT && - scl_data->format == PIXEL_FORMAT_FP16) - return false; - if (scl_data->viewport.width > scl_data->h_active && dpp->ctx->dc->debug.max_downscale_src_width != 0 && scl_data->viewport.width > dpp->ctx->dc->debug.max_downscale_src_width) @@ -1440,15 +1433,6 @@ bool dpp3_construct( dpp->tf_shift = tf_shift; dpp->tf_mask = tf_mask; - dpp->lb_pixel_depth_supported = - LB_PIXEL_DEPTH_18BPP | - LB_PIXEL_DEPTH_24BPP | - LB_PIXEL_DEPTH_30BPP | - LB_PIXEL_DEPTH_36BPP; - - dpp->lb_bits_per_entry = LB_BITS_PER_ENTRY; - dpp->lb_memory_size = LB_TOTAL_NUMBER_OF_ENTRIES; /*0x1404*/ - return true; } diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.h b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.h index 3fa86cd090a0..ac644ae6b9f2 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.h +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.h @@ -154,6 +154,7 @@ SRI(COLOR_KEYER_BLUE, CNVC_CFG, id), \ SRI(CURSOR_CONTROL, CURSOR0_, id),\ SRI(OBUF_MEM_PWR_CTRL, DSCL, id),\ + SRI(DSCL_MEM_PWR_STATUS, DSCL, id), \ SRI(DSCL_MEM_PWR_CTRL, DSCL, id) #define DPP_REG_LIST_DCN30(id)\ @@ -163,8 +164,6 @@ SRI(CM_SHAPER_LUT_DATA, CM, id),\ SRI(CM_MEM_PWR_CTRL2, CM, id), \ SRI(CM_MEM_PWR_STATUS2, CM, id), \ - SRI(DSCL_MEM_PWR_STATUS, DSCL, id), \ - SRI(DSCL_MEM_PWR_CTRL, DSCL, id), \ SRI(CM_BLNDGAM_RAMA_START_SLOPE_CNTL_B, CM, id),\ SRI(CM_BLNDGAM_RAMA_START_SLOPE_CNTL_G, CM, id),\ SRI(CM_BLNDGAM_RAMA_START_SLOPE_CNTL_R, CM, id),\ diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h b/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h index 2a0db2b03047..9ac9d5e8df8b 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h @@ -289,6 +289,9 @@ struct dpp_caps { /* DSCL processing pixel data in fixed or float format */ enum dscl_data_processing_format dscl_data_proc_format; + /* max LB partitions */ + unsigned int max_lb_partitions; + /* Calculates the number of partitions in the line buffer. * The implementation of this function is overloaded for * different versions of DSCL LB. -- cgit v1.2.3-58-ga151 From ce350c6e786ef4bc3a4ddb58f8bdf2e48219fdaa Mon Sep 17 00:00:00 2001 From: Bindu Ramamurthy Date: Fri, 9 Jul 2021 10:35:33 -0400 Subject: drm/amd/display: Populate dtbclk entries for dcn3.02/3.03 [Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li Acked-by: Rodrigo Siqueira Signed-off-by: Bindu Ramamurthy Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c | 6 +++++- drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c b/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c index d65c097333a4..7d3ff5d44402 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c @@ -1398,7 +1398,11 @@ void dcn302_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param dcn3_02_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz; dcn3_02_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz; dcn3_02_soc.clock_limits[i].phyclk_mhz = max_phyclk_mhz; - dcn3_02_soc.clock_limits[i].dtbclk_mhz = dcn3_02_soc.clock_limits[0].dtbclk_mhz; + /* Populate from bw_params for DTBCLK, SOCCLK */ + if (!bw_params->clk_table.entries[i].dtbclk_mhz && i > 0) + dcn3_02_soc.clock_limits[i].dtbclk_mhz = dcn3_02_soc.clock_limits[i-1].dtbclk_mhz; + else + dcn3_02_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz; if (!bw_params->clk_table.entries[i].socclk_mhz && i > 0) dcn3_02_soc.clock_limits[i].socclk_mhz = dcn3_02_soc.clock_limits[i-1].socclk_mhz; else diff --git a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c index f8b84722a389..833ab13fa834 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c @@ -1326,7 +1326,11 @@ void dcn303_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param dcn3_03_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz; dcn3_03_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz; dcn3_03_soc.clock_limits[i].phyclk_mhz = max_phyclk_mhz; - dcn3_03_soc.clock_limits[i].dtbclk_mhz = dcn3_03_soc.clock_limits[0].dtbclk_mhz; + /* Populate from bw_params for DTBCLK, SOCCLK */ + if (!bw_params->clk_table.entries[i].dtbclk_mhz && i > 0) + dcn3_03_soc.clock_limits[i].dtbclk_mhz = dcn3_03_soc.clock_limits[i-1].dtbclk_mhz; + else + dcn3_03_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz; if (!bw_params->clk_table.entries[i].socclk_mhz && i > 0) dcn3_03_soc.clock_limits[i].socclk_mhz = dcn3_03_soc.clock_limits[i-1].socclk_mhz; else -- cgit v1.2.3-58-ga151 From 93b6bd307a54ea62bfcf89748c80bd25b7bd3205 Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Wed, 30 Jun 2021 18:22:51 -0400 Subject: drm/amd/display: change zstate allow msg condition [Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by: Nicholas Kazlauskas Acked-by: Rodrigo Siqueira Signed-off-by: Eric Yang Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c | 16 ++++---- drivers/gpu/drm/amd/display/dc/dc.h | 10 ++--- .../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 44 ++++++++++++++++------ 3 files changed, 45 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c index d15c628a2ab0..4a4894e9d9c9 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c @@ -139,10 +139,10 @@ static void dcn31_update_clocks(struct clk_mgr *clk_mgr_base, * also if safe to lower is false, we just go in the higher state */ if (safe_to_lower) { - if (new_clocks->z9_support == DCN_Z9_SUPPORT_ALLOW && - new_clocks->z9_support != clk_mgr_base->clks.z9_support) { + if (new_clocks->zstate_support == DCN_ZSTATE_SUPPORT_ALLOW && + new_clocks->zstate_support != clk_mgr_base->clks.zstate_support) { dcn31_smu_set_Z9_support(clk_mgr, true); - clk_mgr_base->clks.z9_support = new_clocks->z9_support; + clk_mgr_base->clks.zstate_support = new_clocks->zstate_support; } if (clk_mgr_base->clks.dtbclk_en && !new_clocks->dtbclk_en) { @@ -163,10 +163,10 @@ static void dcn31_update_clocks(struct clk_mgr *clk_mgr_base, } } } else { - if (new_clocks->z9_support == DCN_Z9_SUPPORT_DISALLOW && - new_clocks->z9_support != clk_mgr_base->clks.z9_support) { + if (new_clocks->zstate_support == DCN_ZSTATE_SUPPORT_DISALLOW && + new_clocks->zstate_support != clk_mgr_base->clks.zstate_support) { dcn31_smu_set_Z9_support(clk_mgr, false); - clk_mgr_base->clks.z9_support = new_clocks->z9_support; + clk_mgr_base->clks.zstate_support = new_clocks->zstate_support; } if (!clk_mgr_base->clks.dtbclk_en && new_clocks->dtbclk_en) { @@ -286,7 +286,7 @@ static void dcn31_init_clocks(struct clk_mgr *clk_mgr) clk_mgr->clks.p_state_change_support = true; clk_mgr->clks.prev_p_state_change_support = true; clk_mgr->clks.pwr_state = DCN_PWR_STATE_UNKNOWN; - clk_mgr->clks.z9_support = DCN_Z9_SUPPORT_UNKNOWN; + clk_mgr->clks.zstate_support = DCN_ZSTATE_SUPPORT_UNKNOWN; } static bool dcn31_are_clock_states_equal(struct dc_clocks *a, @@ -300,7 +300,7 @@ static bool dcn31_are_clock_states_equal(struct dc_clocks *a, return false; else if (a->dcfclk_deep_sleep_khz != b->dcfclk_deep_sleep_khz) return false; - else if (a->z9_support != b->z9_support) + else if (a->zstate_support != b->zstate_support) return false; else if (a->dtbclk_en != b->dtbclk_en) return false; diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 45640f1c26c4..8dcea8ff5c5a 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -354,10 +354,10 @@ enum dcn_pwr_state { }; #if defined(CONFIG_DRM_AMD_DC_DCN) -enum dcn_z9_support_state { - DCN_Z9_SUPPORT_UNKNOWN, - DCN_Z9_SUPPORT_ALLOW, - DCN_Z9_SUPPORT_DISALLOW, +enum dcn_zstate_support_state { + DCN_ZSTATE_SUPPORT_UNKNOWN, + DCN_ZSTATE_SUPPORT_ALLOW, + DCN_ZSTATE_SUPPORT_DISALLOW, }; #endif /* @@ -378,7 +378,7 @@ struct dc_clocks { int dramclk_khz; bool p_state_change_support; #if defined(CONFIG_DRM_AMD_DC_DCN) - enum dcn_z9_support_state z9_support; + enum dcn_zstate_support_state zstate_support; bool dtbclk_en; #endif enum dcn_pwr_state pwr_state; diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c index 98d21fb374b1..b173fa3653b5 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c @@ -3081,6 +3081,37 @@ static bool is_dtbclk_required(struct dc *dc, struct dc_state *context) return false; } +static enum dcn_zstate_support_state decide_zstate_support(struct dc *dc, struct dc_state *context) +{ + int plane_count; + int i; + + plane_count = 0; + for (i = 0; i < dc->res_pool->pipe_count; i++) { + if (context->res_ctx.pipe_ctx[i].plane_state) + plane_count++; + } + + /* + * Zstate is allowed in following scenarios: + * 1. Single eDP with PSR enabled + * 2. 0 planes (No memory requests) + * 3. Single eDP without PSR but > 5ms stutter period + */ + if (plane_count == 0) + return DCN_ZSTATE_SUPPORT_ALLOW; + else if (context->stream_count == 1 && context->streams[0]->signal == SIGNAL_TYPE_EDP) { + struct dc_link *link = context->streams[0]->sink->link; + + if ((link->link_index == 0 && link->psr_settings.psr_feature_enabled) + || context->bw_ctx.dml.vba.StutterPeriod > 5000.0) + return DCN_ZSTATE_SUPPORT_ALLOW; + else + return DCN_ZSTATE_SUPPORT_DISALLOW; + } else + return DCN_ZSTATE_SUPPORT_DISALLOW; +} + void dcn20_calculate_dlg_params( struct dc *dc, struct dc_state *context, display_e2e_pipe_params_st *pipes, @@ -3088,7 +3119,6 @@ void dcn20_calculate_dlg_params( int vlevel) { int i, pipe_idx; - int plane_count; /* Writeback MCIF_WB arbitration parameters */ dc->res_pool->funcs->set_mcif_arb_params(dc, context, pipes, pipe_cnt); @@ -3104,17 +3134,7 @@ void dcn20_calculate_dlg_params( != dm_dram_clock_change_unsupported; context->bw_ctx.bw.dcn.clk.dppclk_khz = 0; - context->bw_ctx.bw.dcn.clk.z9_support = (context->bw_ctx.dml.vba.StutterPeriod > 5000.0) ? - DCN_Z9_SUPPORT_ALLOW : DCN_Z9_SUPPORT_DISALLOW; - - plane_count = 0; - for (i = 0; i < dc->res_pool->pipe_count; i++) { - if (context->res_ctx.pipe_ctx[i].plane_state) - plane_count++; - } - - if (plane_count == 0) - context->bw_ctx.bw.dcn.clk.z9_support = DCN_Z9_SUPPORT_ALLOW; + context->bw_ctx.bw.dcn.clk.zstate_support = decide_zstate_support(dc, context); context->bw_ctx.bw.dcn.clk.dtbclk_en = is_dtbclk_required(dc, context); -- cgit v1.2.3-58-ga151 From 6588b101ed0a71a60fa7df0a18ed7db07026d109 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Thu, 15 Jul 2021 14:54:49 +0800 Subject: drm/amd/pm: Support board calibration on aldebaran Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by: Lijo Lazar Reviewed-by: Kevin Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/inc/aldebaran_ppsmc.h | 3 +- drivers/gpu/drm/amd/pm/inc/smu_types.h | 3 +- drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 46 +++++++++++++++++----- 3 files changed, 40 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/inc/aldebaran_ppsmc.h b/drivers/gpu/drm/amd/pm/inc/aldebaran_ppsmc.h index 610266088ff1..35fa0d8e92dd 100644 --- a/drivers/gpu/drm/amd/pm/inc/aldebaran_ppsmc.h +++ b/drivers/gpu/drm/amd/pm/inc/aldebaran_ppsmc.h @@ -101,7 +101,8 @@ #define PPSMC_MSG_SetSystemVirtualSTBtoDramAddrLow 0x41 #define PPSMC_MSG_GfxDriverResetRecovery 0x42 -#define PPSMC_Message_Count 0x43 +#define PPSMC_MSG_BoardPowerCalibration 0x43 +#define PPSMC_Message_Count 0x44 //PPSMC Reset Types #define PPSMC_RESET_TYPE_WARM_RESET 0x00 diff --git a/drivers/gpu/drm/amd/pm/inc/smu_types.h b/drivers/gpu/drm/amd/pm/inc/smu_types.h index 89a16dcd0fff..1d3765b873df 100644 --- a/drivers/gpu/drm/amd/pm/inc/smu_types.h +++ b/drivers/gpu/drm/amd/pm/inc/smu_types.h @@ -225,7 +225,8 @@ __SMU_DUMMY_MAP(DisableDeterminism), \ __SMU_DUMMY_MAP(SetUclkDpmMode), \ __SMU_DUMMY_MAP(LightSBR), \ - __SMU_DUMMY_MAP(GfxDriverResetRecovery), + __SMU_DUMMY_MAP(GfxDriverResetRecovery), \ + __SMU_DUMMY_MAP(BoardPowerCalibration), #undef __SMU_DUMMY_MAP #define __SMU_DUMMY_MAP(type) SMU_MSG_##type diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c index 9316a726195c..cb5485cf243f 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c @@ -134,6 +134,7 @@ static const struct cmn2asic_msg_mapping aldebaran_message_map[SMU_MSG_MAX_COUNT MSG_MAP(DisableDeterminism, PPSMC_MSG_DisableDeterminism, 0), MSG_MAP(SetUclkDpmMode, PPSMC_MSG_SetUclkDpmMode, 0), MSG_MAP(GfxDriverResetRecovery, PPSMC_MSG_GfxDriverResetRecovery, 0), + MSG_MAP(BoardPowerCalibration, PPSMC_MSG_BoardPowerCalibration, 0), }; static const struct cmn2asic_mapping aldebaran_clk_map[SMU_CLK_COUNT] = { @@ -440,6 +441,39 @@ static int aldebaran_setup_pptable(struct smu_context *smu) return ret; } +static bool aldebaran_is_primary(struct smu_context *smu) +{ + struct amdgpu_device *adev = smu->adev; + + if (adev->smuio.funcs && adev->smuio.funcs->get_die_id) + return adev->smuio.funcs->get_die_id(adev) == 0; + + return true; +} + +static int aldebaran_run_board_btc(struct smu_context *smu) +{ + u32 smu_version; + int ret; + + if (!aldebaran_is_primary(smu)) + return 0; + + ret = smu_cmn_get_smc_version(smu, NULL, &smu_version); + if (ret) { + dev_err(smu->adev->dev, "Failed to get smu version!\n"); + return ret; + } + if (smu_version <= 0x00441d00) + return 0; + + ret = smu_cmn_send_smc_msg(smu, SMU_MSG_BoardPowerCalibration, NULL); + if (ret) + dev_err(smu->adev->dev, "Board power calibration failed!\n"); + + return ret; +} + static int aldebaran_run_btc(struct smu_context *smu) { int ret; @@ -447,6 +481,8 @@ static int aldebaran_run_btc(struct smu_context *smu) ret = smu_cmn_send_smc_msg(smu, SMU_MSG_RunDcBtc, NULL); if (ret) dev_err(smu->adev->dev, "RunDcBtc failed!\n"); + else + ret = aldebaran_run_board_btc(smu); return ret; } @@ -524,16 +560,6 @@ static int aldebaran_freqs_in_same_level(int32_t frequency1, return (abs(frequency1 - frequency2) <= EPSILON); } -static bool aldebaran_is_primary(struct smu_context *smu) -{ - struct amdgpu_device *adev = smu->adev; - - if (adev->smuio.funcs && adev->smuio.funcs->get_die_id) - return adev->smuio.funcs->get_die_id(adev) == 0; - - return true; -} - static int aldebaran_get_smu_metrics_data(struct smu_context *smu, MetricsMember_t member, uint32_t *value) -- cgit v1.2.3-58-ga151 From ab7a11bd36ca6cd4d4dab2846eaacafaa5963cc1 Mon Sep 17 00:00:00 2001 From: Aaron Liu Date: Wed, 2 Jun 2021 10:32:41 +0800 Subject: drm/amdgpu: update yellow carp external rev_id handling 0x1681 has a different external revision id. Signed-off-by: Aaron Liu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/nv.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c index cf73a6923203..f589b8334be6 100644 --- a/drivers/gpu/drm/amd/amdgpu/nv.c +++ b/drivers/gpu/drm/amd/amdgpu/nv.c @@ -1236,7 +1236,10 @@ static int nv_common_early_init(void *handle) AMD_PG_SUPPORT_VCN | AMD_PG_SUPPORT_VCN_DPG | AMD_PG_SUPPORT_JPEG; - adev->external_rev_id = adev->rev_id + 0x01; + if (adev->pdev->device == 0x1681) + adev->external_rev_id = adev->rev_id + 0x19; + else + adev->external_rev_id = adev->rev_id + 0x01; break; default: /* FIXME: not supported yet */ -- cgit v1.2.3-58-ga151 From 27f5355f5d9706dfc1c2542253689f421008c969 Mon Sep 17 00:00:00 2001 From: Aaron Liu Date: Wed, 4 Nov 2020 13:04:06 +0800 Subject: drm/amdgpu: add yellow carp pci id (v2) Add Yellow Carp PCI id support. v2: add another DID Signed-off-by: Aaron Liu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index abb928894eac..361b86b71b56 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -1190,6 +1190,10 @@ static const struct pci_device_id pciidlist[] = { /* Van Gogh */ {0x1002, 0x163F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VANGOGH|AMD_IS_APU}, + /* Yellow Carp */ + {0x1002, 0x164D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_YELLOW_CARP|AMD_IS_APU}, + {0x1002, 0x1681, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_YELLOW_CARP|AMD_IS_APU}, + /* Navy_Flounder */ {0x1002, 0x73C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER}, {0x1002, 0x73C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER}, -- cgit v1.2.3-58-ga151 From 6be50f5d83adc9541de3d5be26e968182b5ac150 Mon Sep 17 00:00:00 2001 From: Stylon Wang Date: Wed, 21 Jul 2021 12:25:24 +0800 Subject: drm/amd/display: Fix ASSR regression on embedded panels [Why] Regression found in some embedded panels traces back to the earliest upstreamed ASSR patch. The changed code flow are causing problems with some panels. [How] - Change ASSR enabling code while preserving original code flow as much as possible - Simplify the code on guarding with internal display flag Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620 Reviewed-by: Alex Deucher Signed-off-by: Stylon Wang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 12066f5a53fc..9fb8c46dc606 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1820,8 +1820,7 @@ bool perform_link_training_with_retries( */ panel_mode = DP_PANEL_MODE_DEFAULT; } - } else - panel_mode = DP_PANEL_MODE_DEFAULT; + } } #endif @@ -4650,7 +4649,10 @@ enum dp_panel_mode dp_get_panel_mode(struct dc_link *link) } } - if (link->dpcd_caps.panel_mode_edp) { + if (link->dpcd_caps.panel_mode_edp && + (link->connector_signal == SIGNAL_TYPE_EDP || + (link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT && + link->is_internal_display))) { return DP_PANEL_MODE_EDP; } -- cgit v1.2.3-58-ga151 From d80cded9cc25f841d5250d2e94a7b42be1e81c97 Mon Sep 17 00:00:00 2001 From: Veerabadhran Gopalakrishnan Date: Mon, 19 Jul 2021 19:06:23 +0530 Subject: drm/amdgpu - Corrected the video codecs array name for yellow carp Signed-off-by: Veerabadhran Gopalakrishnan Reviewed-by: James Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/nv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c index f589b8334be6..94d029dbf30d 100644 --- a/drivers/gpu/drm/amd/amdgpu/nv.c +++ b/drivers/gpu/drm/amd/amdgpu/nv.c @@ -173,8 +173,8 @@ static const struct amdgpu_video_codec_info yc_video_codecs_decode_array[] = { }; static const struct amdgpu_video_codecs yc_video_codecs_decode = { - .codec_count = ARRAY_SIZE(bg_video_codecs_decode_array), - .codec_array = bg_video_codecs_decode_array, + .codec_count = ARRAY_SIZE(yc_video_codecs_decode_array), + .codec_array = yc_video_codecs_decode_array, }; static int nv_query_video_codecs(struct amdgpu_device *adev, bool encode, -- cgit v1.2.3-58-ga151 From e40cba9490bab1414d45c2d62defc0ad4f6e4136 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 21 Jul 2021 15:37:59 +0300 Subject: net: dsa: sja1105: make VID 4095 a bridge VLAN too This simple series of commands: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 fails on sja1105 with the following error: [ 33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN [ 33.447710] sja1105 spi0.1: Invalid config, cannot upload Warning: sja1105: Failed to change VLAN Ethertype. For context, sja1105 has 3 operating modes: - SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware - SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware - SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the bridge_vlans are committed to hardware Swapping out a VLAN list and another in happens in sja1105_build_vlan_table(), which performs a delta update procedure. That function is called from a few places, notably from sja1105_vlan_filtering() which is called from the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler. The above set of 2 commands fails when run on a kernel pre-commit 8841f6e63f2c ("net: dsa: sja1105: make devlink property best_effort_vlan_filtering true by default"). So the priv->vlan_state transition that takes place is between VLAN-unaware and full VLAN filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans are swapped in. So why does it fail? Well, the bridge driver, through nbp_vlan_init(), first sets up the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then proceeds to call nbp_vlan_add for the default_pvid. So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge VLANs (yet). So we have wiped the VLAN table clean, and the low-level static config checker complains of an invalid configuration. We _will_ add the bridge VLANs using the dynamic config interface, albeit later, when nbp_vlan_add() calls us. So it is natural that it fails. So why did it ever work? Surprisingly, it looks like I only tested this configuration with 2 things set up in a particular way: - a network manager that brings all ports up - a kernel with CONFIG_VLAN_8021Q=y It is widely known that commit ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net device that comes up. DSA treats these VLANs as bridge VLANs, and therefore, in my testing, the list of bridge_vlans was never empty. However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily empty, and the sja1105_static_config_reload() call from sja1105_vlan_filtering() will fail. To fix this, the simplest thing is to keep VID 4095, the one used for CPU-injected control packets since commit ed040abca4c1 ("net: dsa: sja1105: use 4095 as the private VLAN for untagged traffic"), in the list of bridge VLANs too, not just the list of tag_8021q VLANs. This ensures that the list of bridge VLANs will never be empty. Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Reported-by: Radu Pirea (NXP OSS) Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index ced8c9cb29c2..e2dc997580a8 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -397,6 +397,12 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv) if (dsa_is_cpu_port(ds, port)) v->pvid = true; list_add(&v->list, &priv->dsa_8021q_vlans); + + v = kmemdup(v, sizeof(*v), GFP_KERNEL); + if (!v) + return -ENOMEM; + + list_add(&v->list, &priv->bridge_vlans); } ((struct sja1105_vlan_lookup_entry *)table->entries)[0] = pvid; -- cgit v1.2.3-58-ga151 From 291d0a2c1fa6ff437c8f1156646fdd2525714c80 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Wed, 21 Jul 2021 19:17:21 +0100 Subject: ravb: Fix a typo in comment Fix the typo RX->TX in comment, as the code following the comment process TX and not RX. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 69c50f81e1cb..805397088850 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -920,7 +920,7 @@ static int ravb_poll(struct napi_struct *napi, int budget) if (ravb_rx(ndev, "a, q)) goto out; - /* Processing RX Descriptor Ring */ + /* Processing TX Descriptor Ring */ spin_lock_irqsave(&priv->lock, flags); /* Clear TX interrupt */ ravb_write(ndev, ~(mask | TIS_RESERVED), TIS); -- cgit v1.2.3-58-ga151 From 9f061b9acbb0bdf5317b301c1608ca55be522c92 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Wed, 21 Jul 2021 19:21:26 +0100 Subject: ravb: Remove extra TAB Align the member description comments for struct ravb_desc by removing the extra TAB. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h index 86a1eb0634e8..80e62ca2e3d3 100644 --- a/drivers/net/ethernet/renesas/ravb.h +++ b/drivers/net/ethernet/renesas/ravb.h @@ -864,7 +864,7 @@ enum GECMR_BIT { /* The Ethernet AVB descriptor definitions. */ struct ravb_desc { - __le16 ds; /* Descriptor size */ + __le16 ds; /* Descriptor size */ u8 cc; /* Content control MSBs (reserved) */ u8 die_dt; /* Descriptor interrupt enable and type */ __le32 dptr; /* Descriptor pointer */ -- cgit v1.2.3-58-ga151 From 98c5b13f3a878066741a907a9d0f1f388556ed5c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 21 Jul 2021 15:33:36 -0700 Subject: net: sparx5: fix unmet dependencies warning WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y] Signed-off-by: Randy Dunlap Cc: Lars Povlsen Cc: Steen Hegelund Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" Cc: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/microchip/sparx5/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/microchip/sparx5/Kconfig b/drivers/net/ethernet/microchip/sparx5/Kconfig index ac403d43c74c..7bdbb2d09a14 100644 --- a/drivers/net/ethernet/microchip/sparx5/Kconfig +++ b/drivers/net/ethernet/microchip/sparx5/Kconfig @@ -3,6 +3,7 @@ config SPARX5_SWITCH depends on NET_SWITCHDEV depends on HAS_IOMEM depends on OF + depends on ARCH_SPARX5 || COMPILE_TEST select PHYLINK select PHY_SPARX5_SERDES select RESET_CONTROLLER -- cgit v1.2.3-58-ga151 From 7aaa0f311e2df2704fa8ddb8ed681a3b5841d0bf Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Thu, 22 Jul 2021 15:15:51 +0300 Subject: dpaa2-switch: seed the buffer pool after allocating the swp Any interraction with the buffer pool (seeding a buffer, acquire one) is made through a software portal (SWP, a DPIO object). There are circumstances where the dpaa2-switch driver probes on a DPSW before any DPIO devices have been probed. In this case, seeding of the buffer pool will lead to a panic since no SWPs are initialized. To fix this, seed the buffer pool after making sure that the software portals have been probed and are ready to be used. Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface") Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c index f3d12d0714fb..68b78642c045 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c @@ -2770,32 +2770,32 @@ static int dpaa2_switch_ctrl_if_setup(struct ethsw_core *ethsw) if (err) return err; - err = dpaa2_switch_seed_bp(ethsw); - if (err) - goto err_free_dpbp; - err = dpaa2_switch_alloc_rings(ethsw); if (err) - goto err_drain_dpbp; + goto err_free_dpbp; err = dpaa2_switch_setup_dpio(ethsw); if (err) goto err_destroy_rings; + err = dpaa2_switch_seed_bp(ethsw); + if (err) + goto err_deregister_dpio; + err = dpsw_ctrl_if_enable(ethsw->mc_io, 0, ethsw->dpsw_handle); if (err) { dev_err(ethsw->dev, "dpsw_ctrl_if_enable err %d\n", err); - goto err_deregister_dpio; + goto err_drain_dpbp; } return 0; +err_drain_dpbp: + dpaa2_switch_drain_bp(ethsw); err_deregister_dpio: dpaa2_switch_free_dpio(ethsw); err_destroy_rings: dpaa2_switch_destroy_rings(ethsw); -err_drain_dpbp: - dpaa2_switch_drain_bp(ethsw); err_free_dpbp: dpaa2_switch_free_dpbp(ethsw); -- cgit v1.2.3-58-ga151