From 4050360f964694a3ac0c83badd1a441207c86889 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 29 Jun 2018 13:47:38 -0500 Subject: PCI: rcar: Shut the PHY down in failpath If anything fails past phy_init_fn() and the system is a Gen3 with a PHY, the PHY will be left on and inited. This is caused by the phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3() function, which starts the PHY, yet has no counterpart in the failpath. Add that counterpart. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Signed-off-by: Marek Vasut Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Geert Uytterhoeven Acked-by: Simon Horman Cc: Geert Uytterhoeven Cc: Phil Edworthy Cc: Wolfram Sang --- drivers/pci/controller/pcie-rcar.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c index 874d75c9ee4a..8b0d3206cbc4 100644 --- a/drivers/pci/controller/pcie-rcar.c +++ b/drivers/pci/controller/pcie-rcar.c @@ -1165,7 +1165,7 @@ static int rcar_pcie_probe(struct platform_device *pdev) if (rcar_pcie_hw_init(pcie)) { dev_info(dev, "PCIe link down\n"); err = -ENODEV; - goto err_clk_disable; + goto err_phy_shutdown; } data = rcar_pci_read_reg(pcie, MACSR); @@ -1177,7 +1177,7 @@ static int rcar_pcie_probe(struct platform_device *pdev) dev_err(dev, "failed to enable MSI support: %d\n", err); - goto err_clk_disable; + goto err_phy_shutdown; } } @@ -1191,6 +1191,12 @@ err_msi_teardown: if (IS_ENABLED(CONFIG_PCI_MSI)) rcar_pcie_teardown_msi(pcie); +err_phy_shutdown: + if (pcie->phy) { + phy_power_off(pcie->phy); + phy_exit(pcie->phy); + } + err_clk_disable: clk_disable_unprepare(pcie->bus_clk); -- cgit v1.2.3-58-ga151 From 3c5777c372b6eb2e17802b3dc4bd5ebea45d9bcc Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 29 Jun 2018 13:48:15 -0500 Subject: PCI: rcar: Clean up PHY init on failure If the Gen3 PHY fails to power up, the code does not undo the initialization caused by phy_init(). Add the missing failure handling to the rcar_pcie_phy_init_gen3() function. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Reported-by: Geert Uytterhoeven Signed-off-by: Marek Vasut Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Geert Uytterhoeven Acked-by: Simon Horman Cc: Geert Uytterhoeven Cc: Phil Edworthy Cc: Wolfram Sang --- drivers/pci/controller/pcie-rcar.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c index 8b0d3206cbc4..c8febb009454 100644 --- a/drivers/pci/controller/pcie-rcar.c +++ b/drivers/pci/controller/pcie-rcar.c @@ -680,7 +680,11 @@ static int rcar_pcie_phy_init_gen3(struct rcar_pcie *pcie) if (err) return err; - return phy_power_on(pcie->phy); + err = phy_power_on(pcie->phy); + if (err) + phy_exit(pcie->phy); + + return err; } static int rcar_msi_alloc(struct rcar_msi *chip) -- cgit v1.2.3-58-ga151 From 9bc5f0833a55c7bf768d517b5fdcf89ead43b794 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 29 Jun 2018 13:49:04 -0500 Subject: PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes PCIE_DW_PLAT_HOST does not have any platform dependency, so it should not default to yes. Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode") Signed-off-by: Geert Uytterhoeven Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Gustavo Pimentel --- drivers/pci/controller/dwc/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 16f52c626b4b..91b0194240a5 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -58,7 +58,6 @@ config PCIE_DW_PLAT_HOST depends on PCI && PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST select PCIE_DW_PLAT - default y help Enables support for the PCIe controller in the Designware IP to work in host mode. There are two instances of PCIe controller in -- cgit v1.2.3-58-ga151 From fb0de5b8dcc68da4a0d39b0f5fcd5368085ad7c1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 29 Jun 2018 13:49:24 -0500 Subject: PCI: endpoint: Use after free in pci_epf_unregister_driver() We need to use list_for_each_entry_safe() because the pci_ep_cfs_remove_epf_group() function frees "group". Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Dan Carpenter [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/pci-epf-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index 523a8cab3bfb..bf53fad636a5 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -145,10 +145,10 @@ EXPORT_SYMBOL_GPL(pci_epf_alloc_space); */ void pci_epf_unregister_driver(struct pci_epf_driver *driver) { - struct config_group *group; + struct config_group *group, *tmp; mutex_lock(&pci_epf_mutex); - list_for_each_entry(group, &driver->epf_group, group_entry) + list_for_each_entry_safe(group, tmp, &driver->epf_group, group_entry) pci_ep_cfs_remove_epf_group(group); list_del(&driver->epf_group); mutex_unlock(&pci_epf_mutex); -- cgit v1.2.3-58-ga151 From 8c3f9bd851a4d3acf0a0f222d4e9e41c0cd1ea8e Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 29 Jun 2018 13:49:54 -0500 Subject: PCI: xilinx: Add missing of_node_put() The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Fixes: 8961def56845 ("PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver") Signed-off-by: Nicholas Mc Guire [lorenzo.pieralisi@arm.com: reworked commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/pcie-xilinx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/controller/pcie-xilinx.c b/drivers/pci/controller/pcie-xilinx.c index b110a3a814e3..7b1389d8e2a5 100644 --- a/drivers/pci/controller/pcie-xilinx.c +++ b/drivers/pci/controller/pcie-xilinx.c @@ -509,6 +509,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) port->leg_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX, &intx_domain_ops, port); + of_node_put(pcie_intc_node); if (!port->leg_domain) { dev_err(dev, "Failed to get a INTx IRQ domain\n"); return -ENODEV; -- cgit v1.2.3-58-ga151 From 342639d996f18bc0a4db2f42a84230c0a966dc94 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 29 Jun 2018 13:50:10 -0500 Subject: PCI: xilinx-nwl: Add missing of_node_put() The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Signed-off-by: Nicholas Mc Guire [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/pcie-xilinx-nwl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c index 6a4bbb5b3de0..fb32840ce8e6 100644 --- a/drivers/pci/controller/pcie-xilinx-nwl.c +++ b/drivers/pci/controller/pcie-xilinx-nwl.c @@ -559,7 +559,7 @@ static int nwl_pcie_init_irq_domain(struct nwl_pcie *pcie) PCI_NUM_INTX, &legacy_domain_ops, pcie); - + of_node_put(legacy_intc_node); if (!pcie->legacy_irq_domain) { dev_err(dev, "failed to create IRQ domain\n"); return -ENOMEM; -- cgit v1.2.3-58-ga151 From 3dc6ddfedc2818eaaa36842fbb049191e0c5e50f Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 29 Jun 2018 13:50:27 -0500 Subject: PCI: faraday: Add missing of_node_put() The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here in the error path and after the last usage. Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver") Signed-off-by: Nicholas Mc Guire [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-ftpci100.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c index a1ebe9ed441f..20bb2564a6b3 100644 --- a/drivers/pci/controller/pci-ftpci100.c +++ b/drivers/pci/controller/pci-ftpci100.c @@ -355,11 +355,13 @@ static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p) irq = of_irq_get(intc, 0); if (irq <= 0) { dev_err(p->dev, "failed to get parent IRQ\n"); + of_node_put(intc); return irq ?: -EINVAL; } p->irqdomain = irq_domain_add_linear(intc, PCI_NUM_INTX, &faraday_pci_irqdomain_ops, p); + of_node_put(intc); if (!p->irqdomain) { dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n"); return -EINVAL; -- cgit v1.2.3-58-ga151 From 38972375ef7bdc7dd989bcb48d5448662a95bca2 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 29 Jun 2018 15:08:52 -0500 Subject: PCI/IOV: Reset total_VFs limit after detaching PF driver The TotalVFs register in the SR-IOV capability is the hardware limit on the number of VFs. A PF driver can limit the number of VFs further with pci_sriov_set_totalvfs(). When the PF driver is removed, reset any VF limit that was imposed by the driver because that limit may not apply to other drivers. Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions", and the nfp driver used that to remove the VF limit when the driver unloads. 8d85a7a4f2c9 broke that because instead of removing the VF limit, pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that limit persists even if another driver is loaded. We could fix that by making the nfp driver reset the limit when it unloads, but it seems more robust to do it in the PCI core instead of relying on the driver. The regression scenario is: nfp_pci_probe (driver 1) ... nfp_pci_remove pci_sriov_set_totalvfs(pf->pdev, 0) # limits VFs to 0 ... nfp_pci_probe (driver 2) nfp_rtsym_read_le("nfd_vf_cfg_max_vfs") # no VF limit from firmware Now driver 2 is broken because the VF limit is still 0 from driver 1. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski [bhelgaas: changelog, rename functions] Signed-off-by: Bjorn Helgaas --- drivers/pci/iov.c | 16 ++++++++++++++++ drivers/pci/pci-driver.c | 1 + drivers/pci/pci.h | 4 ++++ 3 files changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index d0d73dbbd5ca..0f04ae648cf1 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -574,6 +574,22 @@ void pci_iov_release(struct pci_dev *dev) sriov_release(dev); } +/** + * pci_iov_remove - clean up SR-IOV state after PF driver is detached + * @dev: the PCI device + */ +void pci_iov_remove(struct pci_dev *dev) +{ + struct pci_sriov *iov = dev->sriov; + + if (!dev->is_physfn) + return; + + iov->driver_max_VFs = iov->total_VFs; + if (iov->num_VFs) + pci_warn(dev, "driver left SR-IOV enabled after remove\n"); +} + /** * pci_iov_update_resource - update a VF BAR * @dev: the PCI device diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index c125d53033c6..6792292b5fc7 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -445,6 +445,7 @@ static int pci_device_remove(struct device *dev) } pcibios_free_irq(pci_dev); pci_dev->driver = NULL; + pci_iov_remove(pci_dev); } /* Undo the runtime PM settings in local_pci_probe() */ diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index c358e7a07f3f..882f1f9596df 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -311,6 +311,7 @@ static inline void pci_restore_ats_state(struct pci_dev *dev) #ifdef CONFIG_PCI_IOV int pci_iov_init(struct pci_dev *dev); void pci_iov_release(struct pci_dev *dev); +void pci_iov_remove(struct pci_dev *dev); void pci_iov_update_resource(struct pci_dev *dev, int resno); resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno); void pci_restore_iov_state(struct pci_dev *dev); @@ -323,6 +324,9 @@ static inline int pci_iov_init(struct pci_dev *dev) } static inline void pci_iov_release(struct pci_dev *dev) +{ +} +static inline void pci_iov_remove(struct pci_dev *dev) { } static inline void pci_restore_iov_state(struct pci_dev *dev) -- cgit v1.2.3-58-ga151 From 83235822b8b4fe47ecbd6b6bcbcc902860ac00fc Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 29 Jun 2018 15:09:00 -0500 Subject: nfp: stop limiting VFs to 0 Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions". After 8d85a7a4f2c9, it means "we can't enable *any* VFs". That broke this scenario where nfp intends to remove any limit on the number of VFs that can be enabled: nfp_pci_probe nfp_pcie_sriov_read_nfd_limit nfp_rtsym_read_le("nfd_vf_cfg_max_vfs", &err) pci_sriov_set_totalvfs(pf->pdev, 0) # if FW didn't expose a limit ... # userspace writes N to sysfs "sriov_numvfs": sriov_numvfs_store pci_sriov_get_totalvfs # now returns 0 return -ERANGE Prior to 8d85a7a4f2c9, pci_sriov_get_totalvfs() returned TotalVFs, but it now returns 0. Remove the pci_sriov_set_totalvfs(pdev, 0) calls so we don't limit the number of VFs that can be enabled. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas --- drivers/net/ethernet/netronome/nfp/nfp_main.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_main.c b/drivers/net/ethernet/netronome/nfp/nfp_main.c index 46b76d5a726c..152283d7e59c 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_main.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_main.c @@ -240,7 +240,6 @@ static int nfp_pcie_sriov_read_nfd_limit(struct nfp_pf *pf) return pci_sriov_set_totalvfs(pf->pdev, pf->limit_vfs); pf->limit_vfs = ~0; - pci_sriov_set_totalvfs(pf->pdev, 0); /* 0 is unset */ /* Allow any setting for backwards compatibility if symbol not found */ if (err == -ENOENT) return 0; @@ -668,7 +667,7 @@ static int nfp_pci_probe(struct pci_dev *pdev, err = nfp_net_pci_probe(pf); if (err) - goto err_sriov_unlimit; + goto err_fw_unload; err = nfp_hwmon_register(pf); if (err) { @@ -680,8 +679,6 @@ static int nfp_pci_probe(struct pci_dev *pdev, err_net_remove: nfp_net_pci_remove(pf); -err_sriov_unlimit: - pci_sriov_set_totalvfs(pf->pdev, 0); err_fw_unload: kfree(pf->rtbl); nfp_mip_close(pf->mip); @@ -715,7 +712,6 @@ static void nfp_pci_remove(struct pci_dev *pdev) nfp_hwmon_unregister(pf); nfp_pcie_sriov_disable(pdev); - pci_sriov_set_totalvfs(pf->pdev, 0); nfp_net_pci_remove(pf); -- cgit v1.2.3-58-ga151