From 8520ce1e17799b220ff421d4f39438c9c572ade3 Mon Sep 17 00:00:00 2001 From: Ludovic Barre Date: Fri, 26 Apr 2019 09:46:35 +0200 Subject: mmc: mmci: Prevent polling for busy detection in IRQ context The IRQ handler, mmci_irq(), loops until all status bits have been cleared. However, the status bit signaling busy in variant->busy_detect_flag, may be set even if busy detection isn't monitored for the current request. This may be the case for the CMD11 when switching the I/O voltage, which leads to that mmci_irq() busy loops in IRQ context. Fix this problem, by clearing the status bit for busy, before continuing to validate the condition for the loop. This is safe, because the busy status detection has already been taken care of by mmci_cmd_irq(). Signed-off-by: Ludovic Barre Signed-off-by: Ulf Hansson --- drivers/mmc/host/mmci.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 049f8e3676ac..356833a606d5 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1535,9 +1535,10 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) } /* - * Don't poll for busy completion in irq context. + * Busy detection has been handled by mmci_cmd_irq() above. + * Clear the status bit to prevent polling in IRQ context. */ - if (host->variant->busy_detect && host->busy_status) + if (host->variant->busy_detect_flag) status &= ~host->variant->busy_detect_flag; ret = 1; -- cgit v1.2.3-58-ga151