From cc06748cf00e6a4accb18c1b70079dccffc69c37 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 28 Feb 2012 19:24:44 -0500 Subject: SERIAL: MIPS DECstation zs.c driver needs module.h This driver is a module and needs module.h, otherwise it will break when we remove a bogus usage of module.h from one of the other MIPS headers. Signed-off-by: Paul Gortmaker Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3446/ Signed-off-by: Ralf Baechle --- drivers/tty/serial/zs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index 4001eee6c08d..92c00b24d0df 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -57,6 +57,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-58-ga151 From 346f81a9a9726740461480e257366c47fbcfdaa3 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 28 Feb 2012 19:24:45 -0500 Subject: SERIAL: MIPS Swarm sb1250-duart.c driver needs module.h This driver is a module and needs module.h, otherwise it will break when we remove a bogus usage of module.h from one of the other MIPS headers. Signed-off-by: Paul Gortmaker Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3447/ Signed-off-by: Ralf Baechle --- drivers/tty/serial/sb1250-duart.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index 0be8a2f00d0b..f76b1688c5c8 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-58-ga151 From 3df425f316fb5c5e90236ff22b6e6616b3516af0 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 12 Apr 2012 17:33:07 +0200 Subject: OF: PCI: const usage needed by MIPS On MIPS we want to call of_irq_map_pci from inside arch/mips/include/asm/pci.h:extern int pcibios_map_irq( const struct pci_dev *dev, u8 slot, u8 pin); For this to work we need to change several functions to const usage. Signed-off-by: John Crispin Cc: linux-pci@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-mips@linux-mips.org Acked-by: Bjorn Helgaas Acked-by: Grant Likely Patchwork: https://patchwork.linux-mips.org/patch/3710/ Signed-off-by: Ralf Baechle --- drivers/of/of_pci_irq.c | 2 +- drivers/pci/pci.c | 2 +- include/linux/of_pci.h | 2 +- include/linux/pci.h | 5 +++-- 4 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c index 93125163dea2..677053813211 100644 --- a/drivers/of/of_pci_irq.c +++ b/drivers/of/of_pci_irq.c @@ -15,7 +15,7 @@ * PCI tree until an device-node is found, at which point it will finish * resolving using the OF tree walking. */ -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq) { struct device_node *dn, *ppnode; struct pci_dev *ppdev; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 111569ccab43..8b91fe741f6a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2369,7 +2369,7 @@ void pci_enable_acs(struct pci_dev *dev) * number is always 0 (see the Implementation Note in section 2.2.8.1 of * the PCI Express Base Specification, Revision 2.1) */ -u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin) +u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin) { int slot; diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h index f93e21700d3e..bb115deb7612 100644 --- a/include/linux/of_pci.h +++ b/include/linux/of_pci.h @@ -5,7 +5,7 @@ struct pci_dev; struct of_irq; -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); +int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq); struct device_node; struct device_node *of_pci_find_child_device(struct device_node *parent, diff --git a/include/linux/pci.h b/include/linux/pci.h index e444f5b49118..3bbc77e20a61 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -680,7 +680,7 @@ int __must_check pci_bus_add_device(struct pci_dev *dev); void pci_read_bridge_bases(struct pci_bus *child); struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res); -u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin); +u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin); int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); extern struct pci_dev *pci_dev_get(struct pci_dev *dev); @@ -1685,7 +1685,8 @@ extern void pci_release_bus_of_node(struct pci_bus *bus); /* Arch may override this (weak) */ extern struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus); -static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) +static inline struct device_node * +pci_device_to_OF_node(const struct pci_dev *pdev) { return pdev ? pdev->dev.of_node : NULL; } -- cgit v1.2.3-58-ga151 From 5238f7bc356670ba702057c7de7f07909133f788 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 11 May 2012 18:48:39 +0200 Subject: GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them buildable. The following 2 patches will convert the drivers to OF. Signed-off-by: John Crispin Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely Patchwork: https://patchwork.linux-mips.org/patch/3838/ Signed-off-by: Ralf Baechle --- arch/mips/lantiq/xway/Makefile | 2 +- arch/mips/lantiq/xway/gpio_ebu.c | 126 -------------------------------- arch/mips/lantiq/xway/gpio_stp.c | 152 --------------------------------------- drivers/gpio/Kconfig | 18 +++++ drivers/gpio/Makefile | 2 + drivers/gpio/gpio-mm-lantiq.c | 126 ++++++++++++++++++++++++++++++++ drivers/gpio/gpio-stp-xway.c | 152 +++++++++++++++++++++++++++++++++++++++ 7 files changed, 299 insertions(+), 279 deletions(-) delete mode 100644 arch/mips/lantiq/xway/gpio_ebu.c delete mode 100644 arch/mips/lantiq/xway/gpio_stp.c create mode 100644 drivers/gpio/gpio-mm-lantiq.c create mode 100644 drivers/gpio/gpio-stp-xway.c (limited to 'drivers') diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile index edef6c582fce..dc3194f6ee42 100644 --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile @@ -1 +1 @@ -obj-y := prom.o sysctrl.o clk.o reset.o gpio.o gpio_stp.o gpio_ebu.o dma.o +obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c deleted file mode 100644 index b91c7f17f10f..000000000000 --- a/arch/mips/lantiq/xway/gpio_ebu.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * By attaching hardware latches to the EBU it is possible to create output - * only gpios. This driver configures a special memory address, which when - * written to outputs 16 bit to the latches. - */ - -#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ -#define LTQ_EBU_WP 0x80000000 /* write protect bit */ - -/* we keep a shadow value of the last value written to the ebu */ -static int ltq_ebu_gpio_shadow = 0x0; -static void __iomem *ltq_ebu_gpio_membase; - -static void ltq_ebu_apply(void) -{ - unsigned long flags; - - spin_lock_irqsave(&ebu_lock, flags); - ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); - *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; - ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); - spin_unlock_irqrestore(&ebu_lock, flags); -} - -static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (value) - ltq_ebu_gpio_shadow |= (1 << offset); - else - ltq_ebu_gpio_shadow &= ~(1 << offset); - ltq_ebu_apply(); -} - -static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - ltq_ebu_set(chip, offset, value); - - return 0; -} - -static struct gpio_chip ltq_ebu_chip = { - .label = "ltq_ebu", - .direction_output = ltq_ebu_direction_output, - .set = ltq_ebu_set, - .base = 72, - .ngpio = 16, - .can_sleep = 1, - .owner = THIS_MODULE, -}; - -static int ltq_ebu_probe(struct platform_device *pdev) -{ - int ret = 0; - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - if (!res) { - dev_err(&pdev->dev, "failed to get memory resource\n"); - return -ENOENT; - } - - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - return -EBUSY; - } - - ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!ltq_ebu_gpio_membase) { - dev_err(&pdev->dev, "Failed to ioremap mem region\n"); - return -ENOMEM; - } - - /* grab the default shadow value passed form the platform code */ - ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; - - /* tell the ebu controller which memory address we will be using */ - ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); - - /* write protect the region */ - ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); - - ret = gpiochip_add(<q_ebu_chip); - if (!ret) - ltq_ebu_apply(); - return ret; -} - -static struct platform_driver ltq_ebu_driver = { - .probe = ltq_ebu_probe, - .driver = { - .name = "ltq_ebu", - .owner = THIS_MODULE, - }, -}; - -static int __init ltq_ebu_init(void) -{ - int ret = platform_driver_register(<q_ebu_driver); - - if (ret) - pr_info("ltq_ebu : Error registering platfom driver!"); - return ret; -} - -postcore_initcall(ltq_ebu_init); diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c deleted file mode 100644 index d674f1be237d..000000000000 --- a/arch/mips/lantiq/xway/gpio_stp.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2007 John Crispin - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define LTQ_STP_CON0 0x00 -#define LTQ_STP_CON1 0x04 -#define LTQ_STP_CPU0 0x08 -#define LTQ_STP_CPU1 0x0C -#define LTQ_STP_AR 0x10 - -#define LTQ_STP_CON_SWU (1 << 31) -#define LTQ_STP_2HZ 0 -#define LTQ_STP_4HZ (1 << 23) -#define LTQ_STP_8HZ (2 << 23) -#define LTQ_STP_10HZ (3 << 23) -#define LTQ_STP_SPEED_MASK (0xf << 23) -#define LTQ_STP_UPD_FPI (1 << 31) -#define LTQ_STP_UPD_MASK (3 << 30) -#define LTQ_STP_ADSL_SRC (3 << 24) - -#define LTQ_STP_GROUP0 (1 << 0) - -#define LTQ_STP_RISING 0 -#define LTQ_STP_FALLING (1 << 26) -#define LTQ_STP_EDGE_MASK (1 << 26) - -#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg) -#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg) -#define ltq_stp_w32_mask(clear, set, reg) \ - ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \ - ltq_stp_membase + (reg)) - -static int ltq_stp_shadow = 0xffff; -static void __iomem *ltq_stp_membase; - -static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (value) - ltq_stp_shadow |= (1 << offset); - else - ltq_stp_shadow &= ~(1 << offset); - ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0); -} - -static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - ltq_stp_set(chip, offset, value); - - return 0; -} - -static struct gpio_chip ltq_stp_chip = { - .label = "ltq_stp", - .direction_output = ltq_stp_direction_output, - .set = ltq_stp_set, - .base = 48, - .ngpio = 24, - .can_sleep = 1, - .owner = THIS_MODULE, -}; - -static int ltq_stp_hw_init(void) -{ - /* sane defaults */ - ltq_stp_w32(0, LTQ_STP_AR); - ltq_stp_w32(0, LTQ_STP_CPU0); - ltq_stp_w32(0, LTQ_STP_CPU1); - ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0); - ltq_stp_w32(0, LTQ_STP_CON1); - - /* rising or falling edge */ - ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0); - - /* per default stp 15-0 are set */ - ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1); - - /* stp are update periodically by the FPI bus */ - ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1); - - /* set stp update speed */ - ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1); - - /* tell the hardware that pin (led) 0 and 1 are controlled - * by the dsl arc - */ - ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0); - - ltq_pmu_enable(PMU_LED); - return 0; -} - -static int __devinit ltq_stp_probe(struct platform_device *pdev) -{ - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - int ret = 0; - - if (!res) - return -ENOENT; - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, "failed to request STP memory\n"); - return -EBUSY; - } - ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!ltq_stp_membase) { - dev_err(&pdev->dev, "failed to remap STP memory\n"); - return -ENOMEM; - } - ret = gpiochip_add(<q_stp_chip); - if (!ret) - ret = ltq_stp_hw_init(); - - return ret; -} - -static struct platform_driver ltq_stp_driver = { - .probe = ltq_stp_probe, - .driver = { - .name = "ltq_stp", - .owner = THIS_MODULE, - }, -}; - -int __init ltq_stp_init(void) -{ - int ret = platform_driver_register(<q_stp_driver); - - if (ret) - pr_info("ltq_stp: error registering platfom driver"); - return ret; -} - -postcore_initcall(ltq_stp_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e03653d69357..8fae07935cd1 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -96,6 +96,14 @@ config GPIO_EP93XX depends on ARCH_EP93XX select GPIO_GENERIC +config GPIO_MM_LANTIQ + bool "Lantiq Memory mapped GPIOs" + depends on LANTIQ && SOC_XWAY + help + This enables support for memory mapped GPIOs on the External Bus Unit + (EBU) found on Lantiq SoCs. The gpios are output only as they are + created by attaching a 16bit latch to the bus. + config GPIO_MPC5200 def_bool y depends on PPC_MPC52xx @@ -306,6 +314,16 @@ config GPIO_STMPE This enables support for the GPIOs found on the STMPE I/O Expanders. +config GPIO_STP_XWAY + bool "XWAY STP GPIOs" + depends on SOC_XWAY + help + This enables support for the Serial To Parallel (STP) unit found on + XWAY SoC. The STP allows the SoC to drive a shift registers cascade, + that can be up to 24 bit. This peripheral is aimed at driving leds. + Some of the gpios/leds can be auto updated by the soc with dsl and + phy status. + config GPIO_TC3589X bool "TC3589X GPIOs" depends on MFD_TC3589X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 007f54bd0081..ed1c96db404b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o +obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o @@ -49,6 +50,7 @@ obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o +obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c new file mode 100644 index 000000000000..b91c7f17f10f --- /dev/null +++ b/drivers/gpio/gpio-mm-lantiq.c @@ -0,0 +1,126 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * By attaching hardware latches to the EBU it is possible to create output + * only gpios. This driver configures a special memory address, which when + * written to outputs 16 bit to the latches. + */ + +#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ +#define LTQ_EBU_WP 0x80000000 /* write protect bit */ + +/* we keep a shadow value of the last value written to the ebu */ +static int ltq_ebu_gpio_shadow = 0x0; +static void __iomem *ltq_ebu_gpio_membase; + +static void ltq_ebu_apply(void) +{ + unsigned long flags; + + spin_lock_irqsave(&ebu_lock, flags); + ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); + *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + spin_unlock_irqrestore(&ebu_lock, flags); +} + +static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + ltq_ebu_gpio_shadow |= (1 << offset); + else + ltq_ebu_gpio_shadow &= ~(1 << offset); + ltq_ebu_apply(); +} + +static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + ltq_ebu_set(chip, offset, value); + + return 0; +} + +static struct gpio_chip ltq_ebu_chip = { + .label = "ltq_ebu", + .direction_output = ltq_ebu_direction_output, + .set = ltq_ebu_set, + .base = 72, + .ngpio = 16, + .can_sleep = 1, + .owner = THIS_MODULE, +}; + +static int ltq_ebu_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!res) { + dev_err(&pdev->dev, "failed to get memory resource\n"); + return -ENOENT; + } + + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + return -EBUSY; + } + + ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ltq_ebu_gpio_membase) { + dev_err(&pdev->dev, "Failed to ioremap mem region\n"); + return -ENOMEM; + } + + /* grab the default shadow value passed form the platform code */ + ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; + + /* tell the ebu controller which memory address we will be using */ + ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); + + /* write protect the region */ + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + + ret = gpiochip_add(<q_ebu_chip); + if (!ret) + ltq_ebu_apply(); + return ret; +} + +static struct platform_driver ltq_ebu_driver = { + .probe = ltq_ebu_probe, + .driver = { + .name = "ltq_ebu", + .owner = THIS_MODULE, + }, +}; + +static int __init ltq_ebu_init(void) +{ + int ret = platform_driver_register(<q_ebu_driver); + + if (ret) + pr_info("ltq_ebu : Error registering platfom driver!"); + return ret; +} + +postcore_initcall(ltq_ebu_init); diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c new file mode 100644 index 000000000000..d674f1be237d --- /dev/null +++ b/drivers/gpio/gpio-stp-xway.c @@ -0,0 +1,152 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2007 John Crispin + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define LTQ_STP_CON0 0x00 +#define LTQ_STP_CON1 0x04 +#define LTQ_STP_CPU0 0x08 +#define LTQ_STP_CPU1 0x0C +#define LTQ_STP_AR 0x10 + +#define LTQ_STP_CON_SWU (1 << 31) +#define LTQ_STP_2HZ 0 +#define LTQ_STP_4HZ (1 << 23) +#define LTQ_STP_8HZ (2 << 23) +#define LTQ_STP_10HZ (3 << 23) +#define LTQ_STP_SPEED_MASK (0xf << 23) +#define LTQ_STP_UPD_FPI (1 << 31) +#define LTQ_STP_UPD_MASK (3 << 30) +#define LTQ_STP_ADSL_SRC (3 << 24) + +#define LTQ_STP_GROUP0 (1 << 0) + +#define LTQ_STP_RISING 0 +#define LTQ_STP_FALLING (1 << 26) +#define LTQ_STP_EDGE_MASK (1 << 26) + +#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg) +#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg) +#define ltq_stp_w32_mask(clear, set, reg) \ + ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \ + ltq_stp_membase + (reg)) + +static int ltq_stp_shadow = 0xffff; +static void __iomem *ltq_stp_membase; + +static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + ltq_stp_shadow |= (1 << offset); + else + ltq_stp_shadow &= ~(1 << offset); + ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0); +} + +static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + ltq_stp_set(chip, offset, value); + + return 0; +} + +static struct gpio_chip ltq_stp_chip = { + .label = "ltq_stp", + .direction_output = ltq_stp_direction_output, + .set = ltq_stp_set, + .base = 48, + .ngpio = 24, + .can_sleep = 1, + .owner = THIS_MODULE, +}; + +static int ltq_stp_hw_init(void) +{ + /* sane defaults */ + ltq_stp_w32(0, LTQ_STP_AR); + ltq_stp_w32(0, LTQ_STP_CPU0); + ltq_stp_w32(0, LTQ_STP_CPU1); + ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0); + ltq_stp_w32(0, LTQ_STP_CON1); + + /* rising or falling edge */ + ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0); + + /* per default stp 15-0 are set */ + ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1); + + /* stp are update periodically by the FPI bus */ + ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1); + + /* set stp update speed */ + ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1); + + /* tell the hardware that pin (led) 0 and 1 are controlled + * by the dsl arc + */ + ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0); + + ltq_pmu_enable(PMU_LED); + return 0; +} + +static int __devinit ltq_stp_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret = 0; + + if (!res) + return -ENOENT; + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request STP memory\n"); + return -EBUSY; + } + ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ltq_stp_membase) { + dev_err(&pdev->dev, "failed to remap STP memory\n"); + return -ENOMEM; + } + ret = gpiochip_add(<q_stp_chip); + if (!ret) + ret = ltq_stp_hw_init(); + + return ret; +} + +static struct platform_driver ltq_stp_driver = { + .probe = ltq_stp_probe, + .driver = { + .name = "ltq_stp", + .owner = THIS_MODULE, + }, +}; + +int __init ltq_stp_init(void) +{ + int ret = platform_driver_register(<q_stp_driver); + + if (ret) + pr_info("ltq_stp: error registering platfom driver"); + return ret; +} + +postcore_initcall(ltq_stp_init); -- cgit v1.2.3-58-ga151 From a36e9a1c5fa67cdc965fe011f1d04317adb35953 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 16 May 2012 22:17:38 +0200 Subject: GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio Implements OF support and convert to of_mm_gpio. By attaching hardware latches to the External Bus Unit (EBU) on Lantiq SoC, it is possible to create output only gpios. This driver configures a special memory address, which when written to, outputs 16 bit to the latches. Signed-off-by: John Crispin Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely Patchwork: https://patchwork.linux-mips.org/patch/3840/ Signed-off-by: Ralf Baechle --- .../devicetree/bindings/gpio/gpio-mm-lantiq.txt | 38 ++++++ drivers/gpio/gpio-mm-lantiq.c | 146 +++++++++++++-------- 2 files changed, 127 insertions(+), 57 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt new file mode 100644 index 000000000000..f93d51478d5a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt @@ -0,0 +1,38 @@ +Lantiq SoC External Bus memory mapped GPIO controller + +By attaching hardware latches to the EBU it is possible to create output +only gpios. This driver configures a special memory address, which when +written to outputs 16 bit to the latches. + +The node describing the memory mapped GPIOs needs to be a child of the node +describing the "lantiq,localbus". + +Required properties: +- compatible : Should be "lantiq,gpio-mm-lantiq" +- reg : Address and length of the register set for the device +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- gpio-controller : Marks the device node as a gpio controller. + +Optional properties: +- lantiq,shadow : The default value that we shall assume as already set on the + shift register cascade. + +Example: + +localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + + gpio_mm0: gpio@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10>; + gpio-controller; + #gpio-cells = <2>; + lantiq,shadow = <0x77f> + }; +} diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c index b91c7f17f10f..2983dfbd0668 100644 --- a/drivers/gpio/gpio-mm-lantiq.c +++ b/drivers/gpio/gpio-mm-lantiq.c @@ -3,16 +3,19 @@ * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. * - * Copyright (C) 2010 John Crispin + * Copyright (C) 2012 John Crispin */ #include -#include +#include #include #include #include #include +#include +#include #include +#include #include @@ -25,102 +28,131 @@ #define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ #define LTQ_EBU_WP 0x80000000 /* write protect bit */ -/* we keep a shadow value of the last value written to the ebu */ -static int ltq_ebu_gpio_shadow = 0x0; -static void __iomem *ltq_ebu_gpio_membase; +struct ltq_mm { + struct of_mm_gpio_chip mmchip; + u16 shadow; /* shadow the latches state */ +}; -static void ltq_ebu_apply(void) +/** + * ltq_mm_apply() - write the shadow value to the ebu address. + * @chip: Pointer to our private data structure. + * + * Write the shadow value to the EBU to set the gpios. We need to set the + * global EBU lock to make sure that PCI/MTD dont break. + */ +static void ltq_mm_apply(struct ltq_mm *chip) { unsigned long flags; spin_lock_irqsave(&ebu_lock, flags); ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); - *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; + __raw_writew(chip->shadow, chip->mmchip.regs); ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); spin_unlock_irqrestore(&ebu_lock, flags); } -static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) +/** + * ltq_mm_set() - gpio_chip->set - set gpios. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Set the shadow value and call ltq_mm_apply. + */ +static void ltq_mm_set(struct gpio_chip *gc, unsigned offset, int value) { + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct ltq_mm *chip = + container_of(mm_gc, struct ltq_mm, mmchip); + if (value) - ltq_ebu_gpio_shadow |= (1 << offset); + chip->shadow |= (1 << offset); else - ltq_ebu_gpio_shadow &= ~(1 << offset); - ltq_ebu_apply(); + chip->shadow &= ~(1 << offset); + ltq_mm_apply(chip); } -static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, - int value) +/** + * ltq_mm_dir_out() - gpio_chip->dir_out - set gpio direction. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Same as ltq_mm_set, always returns 0. + */ +static int ltq_mm_dir_out(struct gpio_chip *gc, unsigned offset, int value) { - ltq_ebu_set(chip, offset, value); + ltq_mm_set(gc, offset, value); return 0; } -static struct gpio_chip ltq_ebu_chip = { - .label = "ltq_ebu", - .direction_output = ltq_ebu_direction_output, - .set = ltq_ebu_set, - .base = 72, - .ngpio = 16, - .can_sleep = 1, - .owner = THIS_MODULE, -}; +/** + * ltq_mm_save_regs() - Set initial values of GPIO pins + * @mm_gc: pointer to memory mapped GPIO chip structure + */ +static void ltq_mm_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct ltq_mm *chip = + container_of(mm_gc, struct ltq_mm, mmchip); + + /* tell the ebu controller which memory address we will be using */ + ltq_ebu_w32(CPHYSADDR(chip->mmchip.regs) | 0x1, LTQ_EBU_ADDRSEL1); + + ltq_mm_apply(chip); +} -static int ltq_ebu_probe(struct platform_device *pdev) +static int ltq_mm_probe(struct platform_device *pdev) { - int ret = 0; struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct ltq_mm *chip; + const __be32 *shadow; + int ret = 0; if (!res) { dev_err(&pdev->dev, "failed to get memory resource\n"); return -ENOENT; } - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - return -EBUSY; - } - - ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!ltq_ebu_gpio_membase) { - dev_err(&pdev->dev, "Failed to ioremap mem region\n"); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) return -ENOMEM; - } - /* grab the default shadow value passed form the platform code */ - ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; + chip->mmchip.gc.ngpio = 16; + chip->mmchip.gc.label = "gpio-mm-ltq"; + chip->mmchip.gc.direction_output = ltq_mm_dir_out; + chip->mmchip.gc.set = ltq_mm_set; + chip->mmchip.save_regs = ltq_mm_save_regs; - /* tell the ebu controller which memory address we will be using */ - ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); + /* store the shadow value if one was passed by the devicetree */ + shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL); + if (shadow) + chip->shadow = be32_to_cpu(*shadow); - /* write protect the region */ - ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); - - ret = gpiochip_add(<q_ebu_chip); - if (!ret) - ltq_ebu_apply(); + ret = of_mm_gpiochip_add(pdev->dev.of_node, &chip->mmchip); + if (ret) + kfree(chip); return ret; } -static struct platform_driver ltq_ebu_driver = { - .probe = ltq_ebu_probe, +static const struct of_device_id ltq_mm_match[] = { + { .compatible = "lantiq,gpio-mm" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_mm_match); + +static struct platform_driver ltq_mm_driver = { + .probe = ltq_mm_probe, .driver = { - .name = "ltq_ebu", + .name = "gpio-mm-ltq", .owner = THIS_MODULE, + .of_match_table = ltq_mm_match, }, }; -static int __init ltq_ebu_init(void) +static int __init ltq_mm_init(void) { - int ret = platform_driver_register(<q_ebu_driver); - - if (ret) - pr_info("ltq_ebu : Error registering platfom driver!"); - return ret; + return platform_driver_register(<q_mm_driver); } -postcore_initcall(ltq_ebu_init); +subsys_initcall(ltq_mm_init); -- cgit v1.2.3-58-ga151 From 54f30066178d4ff2da8e62427975736131cdbf96 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 16 May 2012 22:22:47 +0200 Subject: GPIO: MIPS: lantiq: convert gpio-stp-xway to OF Implements OF support and add code to load custom properties from the DT. The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a peripheral controller used to drive external shift register cascades. At most 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem to drive the 2 LSBs of the cascade automatically. Newer socs are also able to automatically drive some pins via the internal PHYs. The driver currently only supports output functionality. Patches for the input feature found on newer generations of the soc will be provided in a later series. Signed-off-by: John Crispin Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely Patchwork: https://patchwork.linux-mips.org/patch/3839/ Signed-off-by: Ralf Baechle --- .../devicetree/bindings/gpio/gpio-stp-xway.txt | 42 +++ drivers/gpio/gpio-stp-xway.c | 333 +++++++++++++++------ 2 files changed, 283 insertions(+), 92 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt new file mode 100644 index 000000000000..854de130a971 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt @@ -0,0 +1,42 @@ +Lantiq SoC Serial To Parallel (STP) GPIO controller + +The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a +peripheral controller used to drive external shift register cascades. At most +3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem +to drive the 2 LSBs of the cascade automatically. + + +Required properties: +- compatible : Should be "lantiq,gpio-stp-xway" +- reg : Address and length of the register set for the device +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- gpio-controller : Marks the device node as a gpio controller. + +Optional properties: +- lantiq,shadow : The default value that we shall assume as already set on the + shift register cascade. +- lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled + in the shift register cascade. +- lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit + property can enable this feature. +- lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade. +- lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade. +- lantiq,rising : use rising instead of falling edge for the shift register + +Example: + +gpio1: stp@E100BB0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + lantiq,shadow = <0xffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x3>; + lantiq,phy1 = <0x7>; + lantiq,phy2 = <0x7>; + /* lantiq,rising; */ +}; diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c index d674f1be237d..e35096bf3cfb 100644 --- a/drivers/gpio/gpio-stp-xway.c +++ b/drivers/gpio/gpio-stp-xway.c @@ -3,150 +3,299 @@ * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. * - * Copyright (C) 2007 John Crispin + * Copyright (C) 2012 John Crispin * */ #include #include -#include +#include #include -#include +#include #include -#include #include +#include +#include +#include +#include #include -#define LTQ_STP_CON0 0x00 -#define LTQ_STP_CON1 0x04 -#define LTQ_STP_CPU0 0x08 -#define LTQ_STP_CPU1 0x0C -#define LTQ_STP_AR 0x10 - -#define LTQ_STP_CON_SWU (1 << 31) -#define LTQ_STP_2HZ 0 -#define LTQ_STP_4HZ (1 << 23) -#define LTQ_STP_8HZ (2 << 23) -#define LTQ_STP_10HZ (3 << 23) -#define LTQ_STP_SPEED_MASK (0xf << 23) -#define LTQ_STP_UPD_FPI (1 << 31) -#define LTQ_STP_UPD_MASK (3 << 30) -#define LTQ_STP_ADSL_SRC (3 << 24) - -#define LTQ_STP_GROUP0 (1 << 0) - -#define LTQ_STP_RISING 0 -#define LTQ_STP_FALLING (1 << 26) -#define LTQ_STP_EDGE_MASK (1 << 26) - -#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg) -#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg) -#define ltq_stp_w32_mask(clear, set, reg) \ - ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \ - ltq_stp_membase + (reg)) - -static int ltq_stp_shadow = 0xffff; -static void __iomem *ltq_stp_membase; - -static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value) +/* + * The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a + * peripheral controller used to drive external shift register cascades. At most + * 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem + * to drive the 2 LSBs of the cascade automatically. + */ + +/* control register 0 */ +#define XWAY_STP_CON0 0x00 +/* control register 1 */ +#define XWAY_STP_CON1 0x04 +/* data register 0 */ +#define XWAY_STP_CPU0 0x08 +/* data register 1 */ +#define XWAY_STP_CPU1 0x0C +/* access register */ +#define XWAY_STP_AR 0x10 + +/* software or hardware update select bit */ +#define XWAY_STP_CON_SWU BIT(31) + +/* automatic update rates */ +#define XWAY_STP_2HZ 0 +#define XWAY_STP_4HZ BIT(23) +#define XWAY_STP_8HZ BIT(24) +#define XWAY_STP_10HZ (BIT(24) | BIT(23)) +#define XWAY_STP_SPEED_MASK (0xf << 23) + +/* clock source for automatic update */ +#define XWAY_STP_UPD_FPI BIT(31) +#define XWAY_STP_UPD_MASK (BIT(31) | BIT(30)) + +/* let the adsl core drive the 2 LSBs */ +#define XWAY_STP_ADSL_SHIFT 24 +#define XWAY_STP_ADSL_MASK 0x3 + +/* 2 groups of 3 bits can be driven by the phys */ +#define XWAY_STP_PHY_MASK 0x3 +#define XWAY_STP_PHY1_SHIFT 27 +#define XWAY_STP_PHY2_SHIFT 15 + +/* STP has 3 groups of 8 bits */ +#define XWAY_STP_GROUP0 BIT(0) +#define XWAY_STP_GROUP1 BIT(1) +#define XWAY_STP_GROUP2 BIT(2) +#define XWAY_STP_GROUP_MASK (0x7) + +/* Edge configuration bits */ +#define XWAY_STP_FALLING BIT(26) +#define XWAY_STP_EDGE_MASK BIT(26) + +#define xway_stp_r32(m, reg) __raw_readl(m + reg) +#define xway_stp_w32(m, val, reg) __raw_writel(val, m + reg) +#define xway_stp_w32_mask(m, clear, set, reg) \ + ltq_w32((ltq_r32(m + reg) & ~(clear)) | (set), \ + m + reg) + +struct xway_stp { + struct gpio_chip gc; + void __iomem *virt; + u32 edge; /* rising or falling edge triggered shift register */ + u16 shadow; /* shadow the shift registers state */ + u8 groups; /* we can drive 1-3 groups of 8bit each */ + u8 dsl; /* the 2 LSBs can be driven by the dsl core */ + u8 phy1; /* 3 bits can be driven by phy1 */ + u8 phy2; /* 3 bits can be driven by phy2 */ + u8 reserved; /* mask out the hw driven bits in gpio_request */ +}; + +/** + * xway_stp_set() - gpio_chip->set - set gpios. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Set the shadow value and call ltq_ebu_apply. + */ +static void xway_stp_set(struct gpio_chip *gc, unsigned gpio, int val) { - if (value) - ltq_stp_shadow |= (1 << offset); + struct xway_stp *chip = + container_of(gc, struct xway_stp, gc); + + if (val) + chip->shadow |= BIT(gpio); else - ltq_stp_shadow &= ~(1 << offset); - ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0); + chip->shadow &= ~BIT(gpio); + xway_stp_w32(chip->virt, chip->shadow, XWAY_STP_CPU0); + xway_stp_w32_mask(chip->virt, 0, XWAY_STP_CON_SWU, XWAY_STP_CON0); } -static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset, - int value) +/** + * xway_stp_dir_out() - gpio_chip->dir_out - set gpio direction. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Same as xway_stp_set, always returns 0. + */ +static int xway_stp_dir_out(struct gpio_chip *gc, unsigned gpio, int val) { - ltq_stp_set(chip, offset, value); + xway_stp_set(gc, gpio, val); return 0; } -static struct gpio_chip ltq_stp_chip = { - .label = "ltq_stp", - .direction_output = ltq_stp_direction_output, - .set = ltq_stp_set, - .base = 48, - .ngpio = 24, - .can_sleep = 1, - .owner = THIS_MODULE, -}; +/** + * xway_stp_request() - gpio_chip->request + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * We mask out the HW driven pins + */ +static int xway_stp_request(struct gpio_chip *gc, unsigned gpio) +{ + struct xway_stp *chip = + container_of(gc, struct xway_stp, gc); + + if ((gpio < 8) && (chip->reserved & BIT(gpio))) { + dev_err(gc->dev, "GPIO %d is driven by hardware\n", gpio); + return -ENODEV; + } -static int ltq_stp_hw_init(void) + return 0; +} + +/** + * xway_stp_hw_init() - Configure the STP unit and enable the clock gate + * @virt: pointer to the remapped register range + */ +static int xway_stp_hw_init(struct xway_stp *chip) { /* sane defaults */ - ltq_stp_w32(0, LTQ_STP_AR); - ltq_stp_w32(0, LTQ_STP_CPU0); - ltq_stp_w32(0, LTQ_STP_CPU1); - ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0); - ltq_stp_w32(0, LTQ_STP_CON1); + xway_stp_w32(chip->virt, 0, XWAY_STP_AR); + xway_stp_w32(chip->virt, 0, XWAY_STP_CPU0); + xway_stp_w32(chip->virt, 0, XWAY_STP_CPU1); + xway_stp_w32(chip->virt, XWAY_STP_CON_SWU, XWAY_STP_CON0); + xway_stp_w32(chip->virt, 0, XWAY_STP_CON1); - /* rising or falling edge */ - ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0); + /* apply edge trigger settings for the shift register */ + xway_stp_w32_mask(chip->virt, XWAY_STP_EDGE_MASK, + chip->edge, XWAY_STP_CON0); - /* per default stp 15-0 are set */ - ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1); + /* apply led group settings */ + xway_stp_w32_mask(chip->virt, XWAY_STP_GROUP_MASK, + chip->groups, XWAY_STP_CON1); - /* stp are update periodically by the FPI bus */ - ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1); + /* tell the hardware which pins are controlled by the dsl modem */ + xway_stp_w32_mask(chip->virt, + XWAY_STP_ADSL_MASK << XWAY_STP_ADSL_SHIFT, + chip->dsl << XWAY_STP_ADSL_SHIFT, + XWAY_STP_CON0); - /* set stp update speed */ - ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1); + /* tell the hardware which pins are controlled by the phys */ + xway_stp_w32_mask(chip->virt, + XWAY_STP_PHY_MASK << XWAY_STP_PHY1_SHIFT, + chip->phy1 << XWAY_STP_PHY1_SHIFT, + XWAY_STP_CON0); + xway_stp_w32_mask(chip->virt, + XWAY_STP_PHY_MASK << XWAY_STP_PHY2_SHIFT, + chip->phy2 << XWAY_STP_PHY2_SHIFT, + XWAY_STP_CON1); - /* tell the hardware that pin (led) 0 and 1 are controlled - * by the dsl arc + /* mask out the hw driven bits in gpio_request */ + chip->reserved = (chip->phy2 << 5) | (chip->phy1 << 2) | chip->dsl; + + /* + * if we have pins that are driven by hw, we need to tell the stp what + * clock to use as a timer. */ - ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0); + if (chip->reserved) + xway_stp_w32_mask(chip->virt, XWAY_STP_UPD_MASK, + XWAY_STP_UPD_FPI, XWAY_STP_CON1); - ltq_pmu_enable(PMU_LED); return 0; } -static int __devinit ltq_stp_probe(struct platform_device *pdev) +static int __devinit xway_stp_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + const __be32 *shadow, *groups, *dsl, *phy; + struct xway_stp *chip; + struct clk *clk; int ret = 0; - if (!res) - return -ENOENT; - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); if (!res) { - dev_err(&pdev->dev, "failed to request STP memory\n"); - return -EBUSY; + dev_err(&pdev->dev, "failed to request STP resource\n"); + return -ENOENT; } - ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!ltq_stp_membase) { + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->virt = devm_request_and_ioremap(&pdev->dev, res); + if (!chip->virt) { dev_err(&pdev->dev, "failed to remap STP memory\n"); return -ENOMEM; } - ret = gpiochip_add(<q_stp_chip); + chip->gc.dev = &pdev->dev; + chip->gc.label = "stp-xway"; + chip->gc.direction_output = xway_stp_dir_out; + chip->gc.set = xway_stp_set; + chip->gc.request = xway_stp_request; + chip->gc.base = -1; + chip->gc.owner = THIS_MODULE; + + /* store the shadow value if one was passed by the devicetree */ + shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL); + if (shadow) + chip->shadow = be32_to_cpu(*shadow); + + /* find out which gpio groups should be enabled */ + groups = of_get_property(pdev->dev.of_node, "lantiq,groups", NULL); + if (groups) + chip->groups = be32_to_cpu(*groups) & XWAY_STP_GROUP_MASK; + else + chip->groups = XWAY_STP_GROUP0; + chip->gc.ngpio = fls(chip->groups) * 8; + + /* find out which gpios are controlled by the dsl core */ + dsl = of_get_property(pdev->dev.of_node, "lantiq,dsl", NULL); + if (dsl) + chip->dsl = be32_to_cpu(*dsl) & XWAY_STP_ADSL_MASK; + + /* find out which gpios are controlled by the phys */ + if (of_machine_is_compatible("lantiq,ar9") || + of_machine_is_compatible("lantiq,gr9") || + of_machine_is_compatible("lantiq,vr9")) { + phy = of_get_property(pdev->dev.of_node, "lantiq,phy1", NULL); + if (phy) + chip->phy1 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK; + phy = of_get_property(pdev->dev.of_node, "lantiq,phy2", NULL); + if (phy) + chip->phy2 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK; + } + + /* check which edge trigger we should use, default to a falling edge */ + if (!of_find_property(pdev->dev.of_node, "lantiq,rising", NULL)) + chip->edge = XWAY_STP_FALLING; + + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Failed to get clock\n"); + return PTR_ERR(clk); + } + clk_enable(clk); + + ret = xway_stp_hw_init(chip); if (!ret) - ret = ltq_stp_hw_init(); + ret = gpiochip_add(&chip->gc); + + if (!ret) + dev_info(&pdev->dev, "Init done\n"); return ret; } -static struct platform_driver ltq_stp_driver = { - .probe = ltq_stp_probe, +static const struct of_device_id xway_stp_match[] = { + { .compatible = "lantiq,gpio-stp-xway" }, + {}, +}; +MODULE_DEVICE_TABLE(of, xway_stp_match); + +static struct platform_driver xway_stp_driver = { + .probe = xway_stp_probe, .driver = { - .name = "ltq_stp", + .name = "gpio-stp-xway", .owner = THIS_MODULE, + .of_match_table = xway_stp_match, }, }; -int __init ltq_stp_init(void) +int __init xway_stp_init(void) { - int ret = platform_driver_register(<q_stp_driver); - - if (ret) - pr_info("ltq_stp: error registering platfom driver"); - return ret; + return platform_driver_register(&xway_stp_driver); } -postcore_initcall(ltq_stp_init); +subsys_initcall(xway_stp_init); -- cgit v1.2.3-58-ga151 From ceff2676b04943638c6f599ffe4e99efb89aa625 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 13 Apr 2012 09:37:09 +0200 Subject: SERIAL: MIPS: lantiq: implement OF support Add devicetree and handling for our new clkdev clocks. The patch is rather straightforward. .of_match_table is set and the 3 irqs are now loaded from the devicetree. This series converts the lantiq target to clkdev amongst other things. The driver needs to handle two clocks now. The fpi bus clock used to derive the divider and the clock gate needed on some socs to make the secondary port work. Signed-off-by: John Crispin Acked-by: Greg Kroah-Hartman Cc: Alan Cox Cc: linux-serial@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3809/ Signed-off-by: Ralf Baechle --- drivers/tty/serial/lantiq.c | 83 ++++++++++++++++++++++++++++----------------- 1 file changed, 51 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 96c1cacc7360..02da071fe1e7 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -31,16 +31,19 @@ #include #include #include -#include +#include +#include +#include #include #include +#include #include #define PORT_LTQ_ASC 111 #define MAXPORTS 2 #define UART_DUMMY_UER_RX 1 -#define DRVNAME "ltq_asc" +#define DRVNAME "lantiq,asc" #ifdef __BIG_ENDIAN #define LTQ_ASC_TBUF (0x0020 + 3) #define LTQ_ASC_RBUF (0x0024 + 3) @@ -114,6 +117,9 @@ static DEFINE_SPINLOCK(ltq_asc_lock); struct ltq_uart_port { struct uart_port port; + /* clock used to derive divider */ + struct clk *fpiclk; + /* clock gating of the ASC core */ struct clk *clk; unsigned int tx_irq; unsigned int rx_irq; @@ -316,7 +322,9 @@ lqasc_startup(struct uart_port *port) struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); int retval; - port->uartclk = clk_get_rate(ltq_port->clk); + if (ltq_port->clk) + clk_enable(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), port->membase + LTQ_ASC_CLC); @@ -382,6 +390,8 @@ lqasc_shutdown(struct uart_port *port) port->membase + LTQ_ASC_RXFCON); ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, port->membase + LTQ_ASC_TXFCON); + if (ltq_port->clk) + clk_disable(ltq_port->clk); } static void @@ -630,7 +640,7 @@ lqasc_console_setup(struct console *co, char *options) port = <q_port->port; - port->uartclk = clk_get_rate(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -668,37 +678,32 @@ static struct uart_driver lqasc_reg = { static int __init lqasc_probe(struct platform_device *pdev) { + struct device_node *node = pdev->dev.of_node; struct ltq_uart_port *ltq_port; struct uart_port *port; - struct resource *mmres, *irqres; - int tx_irq, rx_irq, err_irq; - struct clk *clk; + struct resource *mmres, irqres[3]; + int line = 0; int ret; mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) + ret = of_irq_to_resource_table(node, irqres, 3); + if (!mmres || (ret != 3)) { + dev_err(&pdev->dev, + "failed to get memory/irq for serial port\n"); return -ENODEV; + } - if (pdev->id >= MAXPORTS) - return -EBUSY; + /* check if this is the console port */ + if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC)) + line = 1; - if (lqasc_port[pdev->id] != NULL) + if (lqasc_port[line]) { + dev_err(&pdev->dev, "port %d already allocated\n", line); return -EBUSY; - - clk = clk_get(&pdev->dev, "fpi"); - if (IS_ERR(clk)) { - pr_err("failed to get fpi clk\n"); - return -ENOENT; } - tx_irq = platform_get_irq_byname(pdev, "tx"); - rx_irq = platform_get_irq_byname(pdev, "rx"); - err_irq = platform_get_irq_byname(pdev, "err"); - if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0)) - return -ENODEV; - - ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL); + ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port), + GFP_KERNEL); if (!ltq_port) return -ENOMEM; @@ -709,19 +714,26 @@ lqasc_probe(struct platform_device *pdev) port->ops = &lqasc_pops; port->fifosize = 16; port->type = PORT_LTQ_ASC, - port->line = pdev->id; + port->line = line; port->dev = &pdev->dev; - - port->irq = tx_irq; /* unused, just to be backward-compatibe */ + /* unused, just to be backward-compatible */ + port->irq = irqres[0].start; port->mapbase = mmres->start; - ltq_port->clk = clk; + ltq_port->fpiclk = clk_get_fpi(); + if (IS_ERR(ltq_port->fpiclk)) { + pr_err("failed to get fpi clk\n"); + return -ENOENT; + } - ltq_port->tx_irq = tx_irq; - ltq_port->rx_irq = rx_irq; - ltq_port->err_irq = err_irq; + /* not all asc ports have clock gates, lets ignore the return code */ + ltq_port->clk = clk_get(&pdev->dev, NULL); - lqasc_port[pdev->id] = ltq_port; + ltq_port->tx_irq = irqres[0].start; + ltq_port->rx_irq = irqres[1].start; + ltq_port->err_irq = irqres[2].start; + + lqasc_port[line] = ltq_port; platform_set_drvdata(pdev, ltq_port); ret = uart_add_one_port(&lqasc_reg, port); @@ -729,10 +741,17 @@ lqasc_probe(struct platform_device *pdev) return ret; } +static const struct of_device_id ltq_asc_match[] = { + { .compatible = DRVNAME }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_asc_match); + static struct platform_driver lqasc_driver = { .driver = { .name = DRVNAME, .owner = THIS_MODULE, + .of_match_table = ltq_asc_match, }, }; -- cgit v1.2.3-58-ga151 From cdb8612147b7fba751e6fa193f32b09937a7e16b Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 12 Apr 2012 21:21:56 +0200 Subject: watchdog: MIPS: lantiq: implement OF support and minor fixes Add support for OF. We also apply the following small fixes * reduce boiler plate by using devm_request_and_ioremap * sane error path for the clock * move LTQ_RST_CAUSE_WDTRST to a soc specific header file * add a message to show that the driver loaded Signed-off-by: John Crispin Acked-by: Wim Van Sebroeck Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3810/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-lantiq/lantiq.h | 1 - .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 + drivers/watchdog/lantiq_wdt.c | 56 ++++++++++------------ 3 files changed, 27 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h index 6775d2402cd0..64fbc3faad64 100644 --- a/arch/mips/include/asm/mach-lantiq/lantiq.h +++ b/arch/mips/include/asm/mach-lantiq/lantiq.h @@ -49,7 +49,6 @@ extern struct clk *clk_get_io(void); extern unsigned char ltq_boot_select(void); /* find out what caused the last cpu reset */ extern int ltq_reset_cause(void); -#define LTQ_RST_CAUSE_WDTRST 0x20 #define IOPORT_RESOURCE_START 0x10000000 #define IOPORT_RESOURCE_END 0xffffffff diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h index b5a2acf9156f..d0d40a42327c 100644 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h @@ -133,6 +133,8 @@ extern __iomem void *ltq_cgu_membase; #define LTQ_WDT_BASE_ADDR 0x1F8803F0 #define LTQ_WDT_SIZE 0x10 +#define LTQ_RST_CAUSE_WDTRST 0x20 + /* STP - serial to parallel conversion unit */ #define LTQ_STP_BASE_ADDR 0x1E100BB0 #define LTQ_STP_SIZE 0x40 diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c index a9593a3a32a0..2e74c3a8ee58 100644 --- a/drivers/watchdog/lantiq_wdt.c +++ b/drivers/watchdog/lantiq_wdt.c @@ -13,14 +13,15 @@ #include #include #include -#include +#include #include #include #include -#include +#include -/* Section 3.4 of the datasheet +/* + * Section 3.4 of the datasheet * The password sequence protects the WDT control register from unintended * write actions, which might cause malfunction of the WDT. * @@ -70,7 +71,8 @@ ltq_wdt_disable(void) { /* write the first password magic */ ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); - /* write the second password magic with no config + /* + * write the second password magic with no config * this turns the watchdog off */ ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR); @@ -184,7 +186,7 @@ static struct miscdevice ltq_wdt_miscdev = { .fops = <q_wdt_fops, }; -static int __init +static int __devinit ltq_wdt_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -194,28 +196,27 @@ ltq_wdt_probe(struct platform_device *pdev) dev_err(&pdev->dev, "cannot obtain I/O memory region"); return -ENOENT; } - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, "cannot request I/O memory region"); - return -EBUSY; - } - ltq_wdt_membase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); + + ltq_wdt_membase = devm_request_and_ioremap(&pdev->dev, res); if (!ltq_wdt_membase) { dev_err(&pdev->dev, "cannot remap I/O memory region\n"); return -ENOMEM; } /* we do not need to enable the clock as it is always running */ - clk = clk_get(&pdev->dev, "io"); - WARN_ON(!clk); + clk = clk_get_io(); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Failed to get clock\n"); + return -ENOENT; + } ltq_io_region_clk_rate = clk_get_rate(clk); clk_put(clk); + /* find out if the watchdog caused the last reboot */ if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST) ltq_wdt_bootstatus = WDIOF_CARDRESET; + dev_info(&pdev->dev, "Init done\n"); return misc_register(<q_wdt_miscdev); } @@ -227,33 +228,26 @@ ltq_wdt_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id ltq_wdt_match[] = { + { .compatible = "lantiq,wdt" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_wdt_match); static struct platform_driver ltq_wdt_driver = { + .probe = ltq_wdt_probe, .remove = __devexit_p(ltq_wdt_remove), .driver = { - .name = "ltq_wdt", + .name = "wdt", .owner = THIS_MODULE, + .of_match_table = ltq_wdt_match, }, }; -static int __init -init_ltq_wdt(void) -{ - return platform_driver_probe(<q_wdt_driver, ltq_wdt_probe); -} - -static void __exit -exit_ltq_wdt(void) -{ - return platform_driver_unregister(<q_wdt_driver); -} - -module_init(init_ltq_wdt); -module_exit(exit_ltq_wdt); +module_platform_driver(ltq_wdt_driver); module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); - MODULE_AUTHOR("John Crispin "); MODULE_DESCRIPTION("Lantiq SoC Watchdog"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-58-ga151 From 02fa961fbf1c79783781cb8967b80ceaa8be4832 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 13 Apr 2012 09:36:46 +0200 Subject: MTD: MIPS: lantiq: implement OF support Adds bindings for OF and make use of module_platform_driver for lantiq based socs. Signed-off-by: John Crispin Acked-by: Artem Bityutskiy Cc: linux-mtd@lists.infradead.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3811/ Signed-off-by: Ralf Baechle --- drivers/mtd/maps/lantiq-flash.c | 69 +++++++++++++++-------------------------- 1 file changed, 25 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c index b5401e355745..aefa11121674 100644 --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c @@ -21,7 +21,6 @@ #include #include -#include /* * The NOR flash is connected to the same external bus unit (EBU) as PCI. @@ -44,8 +43,9 @@ struct ltq_mtd { struct map_info *map; }; -static char ltq_map_name[] = "ltq_nor"; -static const char *ltq_probe_types[] __devinitconst = { "cmdlinepart", NULL }; +static const char ltq_map_name[] = "ltq_nor"; +static const char *ltq_probe_types[] __devinitconst = { + "cmdlinepart", "ofpart", NULL }; static map_word ltq_read16(struct map_info *map, unsigned long adr) @@ -108,12 +108,11 @@ ltq_copy_to(struct map_info *map, unsigned long to, spin_unlock_irqrestore(&ebu_lock, flags); } -static int __init +static int __devinit ltq_mtd_probe(struct platform_device *pdev) { - struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev); + struct mtd_part_parser_data ppdata; struct ltq_mtd *ltq_mtd; - struct resource *res; struct cfi_private *cfi; int err; @@ -122,28 +121,19 @@ ltq_mtd_probe(struct platform_device *pdev) ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!ltq_mtd->res) { - dev_err(&pdev->dev, "failed to get memory resource"); + dev_err(&pdev->dev, "failed to get memory resource\n"); err = -ENOENT; goto err_out; } - res = devm_request_mem_region(&pdev->dev, ltq_mtd->res->start, - resource_size(ltq_mtd->res), dev_name(&pdev->dev)); - if (!ltq_mtd->res) { - dev_err(&pdev->dev, "failed to request mem resource"); - err = -EBUSY; - goto err_out; - } - ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL); - ltq_mtd->map->phys = res->start; - ltq_mtd->map->size = resource_size(res); - ltq_mtd->map->virt = devm_ioremap_nocache(&pdev->dev, - ltq_mtd->map->phys, ltq_mtd->map->size); + ltq_mtd->map->phys = ltq_mtd->res->start; + ltq_mtd->map->size = resource_size(ltq_mtd->res); + ltq_mtd->map->virt = devm_request_and_ioremap(&pdev->dev, ltq_mtd->res); if (!ltq_mtd->map->virt) { - dev_err(&pdev->dev, "failed to ioremap!\n"); - err = -ENOMEM; - goto err_free; + dev_err(&pdev->dev, "failed to remap mem resource\n"); + err = -EBUSY; + goto err_out; } ltq_mtd->map->name = ltq_map_name; @@ -169,9 +159,9 @@ ltq_mtd_probe(struct platform_device *pdev) cfi->addr_unlock1 ^= 1; cfi->addr_unlock2 ^= 1; - err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types, NULL, - ltq_mtd_data->parts, - ltq_mtd_data->nr_parts); + ppdata.of_node = pdev->dev.of_node; + err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types, + &ppdata, NULL, 0); if (err) { dev_err(&pdev->dev, "failed to add partitions\n"); goto err_destroy; @@ -204,32 +194,23 @@ ltq_mtd_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id ltq_mtd_match[] = { + { .compatible = "lantiq,nor" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_mtd_match); + static struct platform_driver ltq_mtd_driver = { + .probe = ltq_mtd_probe, .remove = __devexit_p(ltq_mtd_remove), .driver = { - .name = "ltq_nor", + .name = "ltq-nor", .owner = THIS_MODULE, + .of_match_table = ltq_mtd_match, }, }; -static int __init -init_ltq_mtd(void) -{ - int ret = platform_driver_probe(<q_mtd_driver, ltq_mtd_probe); - - if (ret) - pr_err("ltq_nor: error registering platform driver"); - return ret; -} - -static void __exit -exit_ltq_mtd(void) -{ - platform_driver_unregister(<q_mtd_driver); -} - -module_init(init_ltq_mtd); -module_exit(exit_ltq_mtd); +module_platform_driver(ltq_mtd_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("John Crispin "); -- cgit v1.2.3-58-ga151 From fa09eded0e3764ddb8a97440f5b5c5e65e413b6a Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sat, 5 May 2012 15:41:42 +0200 Subject: MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc When running on a FALC-ON SoC, we need to check the bootstrap options to see if NOR is available. Signed-off-by: John Crispin Acked-by: Artem Bityutskiy Cc: linux-mtd@lists.infradead.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3815/ Signed-off-by: Ralf Baechle --- drivers/mtd/maps/lantiq-flash.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c index aefa11121674..c03456f17004 100644 --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c @@ -19,6 +19,7 @@ #include #include #include +#include #include @@ -116,6 +117,12 @@ ltq_mtd_probe(struct platform_device *pdev) struct cfi_private *cfi; int err; + if (of_machine_is_compatible("lantiq,falcon") && + (ltq_boot_select() != BS_FLASH)) { + dev_err(&pdev->dev, "invalid bootstrap options\n"); + return -ENODEV; + } + ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL); platform_set_drvdata(pdev, ltq_mtd); -- cgit v1.2.3-58-ga151