From 72729910c38ca5b4736032c15dc3f9d48fe4f68a Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 27 Sep 2006 09:44:11 +0100 Subject: [ARM] 3865/1: AT91RM9200 header updates This is more preparation for adding support for the new Atmel AT91SAM9 processors. Changes include: - Replace AT91_BASE_* with AT91RM9200_BASE_* - Replace AT91_ID_* with AT91RM9200_ID_* - ROM, SRAM and UHP address definitions moved to at91rm9200.h. - The raw AT91_P[ABCD]_* definitions are now depreciated in favour of the GPIO API. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- drivers/mmc/at91_mci.c | 4 ++-- drivers/net/arm/at91_ether.c | 2 +- drivers/serial/at91_serial.c | 2 +- drivers/usb/gadget/at91_udc.c | 6 +++--- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c index 6b7638b84290..4b3d4d637030 100644 --- a/drivers/mmc/at91_mci.c +++ b/drivers/mmc/at91_mci.c @@ -850,7 +850,7 @@ static int at91_mci_probe(struct platform_device *pdev) /* * Allocate the MCI interrupt */ - ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host); + ret = request_irq(AT91RM9200_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host); if (ret) { printk(KERN_ERR "Failed to request MCI interrupt\n"); clk_disable(mci_clk); @@ -906,7 +906,7 @@ static int at91_mci_remove(struct platform_device *pdev) mmc_remove_host(mmc); at91_mci_disable(); - free_irq(AT91_ID_MCI, host); + free_irq(AT91RM9200_ID_MCI, host); mmc_free_host(mmc); clk_disable(mci_clk); /* Disable the peripheral clock */ diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 95b28aa01f4f..3ecf2cc53a7c 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -947,7 +947,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add return -ENOMEM; dev->base_addr = AT91_VA_BASE_EMAC; - dev->irq = AT91_ID_EMAC; + dev->irq = AT91RM9200_ID_EMAC; SET_MODULE_OWNER(dev); /* Install the interrupt handler */ diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c index 54c6b2adf7b7..bf4bf103e5a0 100644 --- a/drivers/serial/at91_serial.c +++ b/drivers/serial/at91_serial.c @@ -139,7 +139,7 @@ static void at91_set_mctrl(struct uart_port *port, u_int mctrl) * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21. * We need to drive the pin manually. */ - if (port->mapbase == AT91_BASE_US0) { + if (port->mapbase == AT91RM9200_BASE_US0) { if (mctrl & TIOCM_RTS) at91_set_gpio_value(AT91_PIN_PA21, 0); else diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index cfebca05ead5..043744f1ab72 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1658,7 +1658,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return -ENODEV; } - if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) { + if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; } @@ -1720,7 +1720,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) fail1: device_unregister(&udc->gadget.dev); fail0: - release_mem_region(AT91_BASE_UDP, SZ_16K); + release_mem_region(AT91RM9200_BASE_UDP, SZ_16K); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } @@ -1742,7 +1742,7 @@ static int __devexit at91udc_remove(struct platform_device *pdev) free_irq(udc->board.vbus_pin, udc); free_irq(udc->udp_irq, udc); device_unregister(&udc->gadget.dev); - release_mem_region(AT91_BASE_UDP, SZ_16K); + release_mem_region(AT91RM9200_BASE_UDP, SZ_16K); clk_put(udc->iclk); clk_put(udc->fclk); -- cgit v1.2.3-58-ga151