From b5bfc21af5cb3d53f9cee0ef82eaa43762a90f81 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 6 Feb 2019 10:52:30 +0000 Subject: net: sfp: do not probe SFP module before we're attached When we probe a SFP module, we expect to be able to call the upstream device's module_insert() function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose the module_insert() call. Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/sfp-bus.c | 2 ++ drivers/net/phy/sfp.c | 30 +++++++++++++++++++++--------- drivers/net/phy/sfp.h | 2 ++ 3 files changed, 25 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index ad9db652874d..fef701bfad62 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -347,6 +347,7 @@ static int sfp_register_bus(struct sfp_bus *bus) return ret; } } + bus->socket_ops->attach(bus->sfp); if (bus->started) bus->socket_ops->start(bus->sfp); bus->netdev->sfp_bus = bus; @@ -362,6 +363,7 @@ static void sfp_unregister_bus(struct sfp_bus *bus) if (bus->registered) { if (bus->started) bus->socket_ops->stop(bus->sfp); + bus->socket_ops->detach(bus->sfp); if (bus->phydev && ops && ops->disconnect_phy) ops->disconnect_phy(bus->upstream); } diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index fd8bb998ae52..68c8fbf099f8 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -184,6 +184,7 @@ struct sfp { struct gpio_desc *gpio[GPIO_MAX]; + bool attached; unsigned int state; struct delayed_work poll; struct delayed_work timeout; @@ -1475,7 +1476,7 @@ static void sfp_sm_event(struct sfp *sfp, unsigned int event) */ switch (sfp->sm_mod_state) { default: - if (event == SFP_E_INSERT) { + if (event == SFP_E_INSERT && sfp->attached) { sfp_module_tx_disable(sfp); sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT); } @@ -1607,6 +1608,19 @@ static void sfp_sm_event(struct sfp *sfp, unsigned int event) mutex_unlock(&sfp->sm_mutex); } +static void sfp_attach(struct sfp *sfp) +{ + sfp->attached = true; + if (sfp->state & SFP_F_PRESENT) + sfp_sm_event(sfp, SFP_E_INSERT); +} + +static void sfp_detach(struct sfp *sfp) +{ + sfp->attached = false; + sfp_sm_event(sfp, SFP_E_REMOVE); +} + static void sfp_start(struct sfp *sfp) { sfp_sm_event(sfp, SFP_E_DEV_UP); @@ -1667,6 +1681,8 @@ static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee, } static const struct sfp_socket_ops sfp_module_ops = { + .attach = sfp_attach, + .detach = sfp_detach, .start = sfp_start, .stop = sfp_stop, .module_info = sfp_module_info, @@ -1834,10 +1850,6 @@ static int sfp_probe(struct platform_device *pdev) dev_info(sfp->dev, "Host maximum power %u.%uW\n", sfp->max_power_mW / 1000, (sfp->max_power_mW / 100) % 10); - sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops); - if (!sfp->sfp_bus) - return -ENOMEM; - /* Get the initial state, and always signal TX disable, * since the network interface will not be up. */ @@ -1848,10 +1860,6 @@ static int sfp_probe(struct platform_device *pdev) sfp->state |= SFP_F_RATE_SELECT; sfp_set_state(sfp, sfp->state); sfp_module_tx_disable(sfp); - rtnl_lock(); - if (sfp->state & SFP_F_PRESENT) - sfp_sm_event(sfp, SFP_E_INSERT); - rtnl_unlock(); for (i = 0; i < GPIO_MAX; i++) { if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) @@ -1884,6 +1892,10 @@ static int sfp_probe(struct platform_device *pdev) dev_warn(sfp->dev, "No tx_disable pin: SFP modules will always be emitting.\n"); + sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops); + if (!sfp->sfp_bus) + return -ENOMEM; + return 0; } diff --git a/drivers/net/phy/sfp.h b/drivers/net/phy/sfp.h index 31b0acf337e2..64f54b0bbd8c 100644 --- a/drivers/net/phy/sfp.h +++ b/drivers/net/phy/sfp.h @@ -7,6 +7,8 @@ struct sfp; struct sfp_socket_ops { + void (*attach)(struct sfp *sfp); + void (*detach)(struct sfp *sfp); void (*start)(struct sfp *sfp); void (*stop)(struct sfp *sfp); int (*module_info)(struct sfp *sfp, struct ethtool_modinfo *modinfo); -- cgit v1.2.3-58-ga151 From 978749617bc0b5355e659cbeb855f7bcdc3b40ea Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 10 Feb 2019 15:26:07 +0100 Subject: Revert "r8169: remove unneeded mmiowb barriers" This reverts commit bd7153bd83b806bfcc2e79b7a6f43aa653d06ef3. There doesn't seem to be anything wrong with this patch, it's just reverted to get a stable baseline again. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index abb94c543aa2..bba806ce57d3 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1286,11 +1286,13 @@ static u16 rtl_get_events(struct rtl8169_private *tp) static void rtl_ack_events(struct rtl8169_private *tp, u16 bits) { RTL_W16(tp, IntrStatus, bits); + mmiowb(); } static void rtl_irq_disable(struct rtl8169_private *tp) { RTL_W16(tp, IntrMask, 0); + mmiowb(); } #define RTL_EVENT_NAPI_RX (RxOK | RxErr) @@ -6130,8 +6132,10 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, if (unlikely(stop_queue)) netif_stop_queue(dev); - if (__netdev_sent_queue(dev, skb->len, skb->xmit_more)) + if (__netdev_sent_queue(dev, skb->len, skb->xmit_more)) { RTL_W8(tp, TxPoll, NPQ); + mmiowb(); + } if (unlikely(stop_queue)) { /* Sync with rtl_tx: @@ -6483,7 +6487,9 @@ static int rtl8169_poll(struct napi_struct *napi, int budget) if (work_done < budget) { napi_complete_done(napi, work_done); + rtl_irq_enable(tp); + mmiowb(); } return work_done; -- cgit v1.2.3-58-ga151 From 0255d5927c0f2484de2649c7eb69e4fc459f0130 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 10 Feb 2019 15:28:04 +0100 Subject: Revert "r8169: make use of xmit_more and __netdev_sent_queue" This reverts commit 2e6eedb4813e34d8d84ac0eb3afb668966f3f356. Sander reported a regression causing a kernel panic[1], therefore let's revert this commit. [1] https://marc.info/?t=154965066400001&r=1&w=2 Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index bba806ce57d3..6e36b88ca7c9 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6074,7 +6074,6 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, struct device *d = tp_to_dev(tp); dma_addr_t mapping; u32 opts[2], len; - bool stop_queue; int frags; if (unlikely(!rtl_tx_slots_avail(tp, skb_shinfo(skb)->nr_frags))) { @@ -6116,6 +6115,8 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, txd->opts2 = cpu_to_le32(opts[1]); + netdev_sent_queue(dev, skb->len); + skb_tx_timestamp(skb); /* Force memory writes to complete before releasing descriptor */ @@ -6128,16 +6129,16 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, tp->cur_tx += frags + 1; - stop_queue = !rtl_tx_slots_avail(tp, MAX_SKB_FRAGS); - if (unlikely(stop_queue)) - netif_stop_queue(dev); + RTL_W8(tp, TxPoll, NPQ); - if (__netdev_sent_queue(dev, skb->len, skb->xmit_more)) { - RTL_W8(tp, TxPoll, NPQ); - mmiowb(); - } + mmiowb(); - if (unlikely(stop_queue)) { + if (!rtl_tx_slots_avail(tp, MAX_SKB_FRAGS)) { + /* Avoid wrongly optimistic queue wake-up: rtl_tx thread must + * not miss a ring update when it notices a stopped queue. + */ + smp_wmb(); + netif_stop_queue(dev); /* Sync with rtl_tx: * - publish queue status and cur_tx ring index (write barrier) * - refresh dirty_tx ring index (read barrier). -- cgit v1.2.3-58-ga151 From 4179cb5a4c924cd233eaadd081882425bc98f44e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 7 Feb 2019 12:27:38 -0800 Subject: vxlan: test dev->flags & IFF_UP before calling netif_rx() netif_rx() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Otherwise we risk use-after-free and/or crashes. Note this patch also fixes a small issue that came with commit ce6502a8f957 ("vxlan: fix a use after free in vxlan_encap_bypass"), since the dev->stats.rx_dropped change was done on the wrong device. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Fixes: ce6502a8f957 ("vxlan: fix a use after free in vxlan_encap_bypass") Signed-off-by: Eric Dumazet Cc: Petr Machata Cc: Ido Schimmel Cc: Roopa Prabhu Cc: Stefano Brivio Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 5209ee9aac47..2aae11feff0c 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2219,7 +2219,7 @@ static void vxlan_encap_bypass(struct sk_buff *skb, struct vxlan_dev *src_vxlan, struct pcpu_sw_netstats *tx_stats, *rx_stats; union vxlan_addr loopback; union vxlan_addr *remote_ip = &dst_vxlan->default_dst.remote_ip; - struct net_device *dev = skb->dev; + struct net_device *dev; int len = skb->len; tx_stats = this_cpu_ptr(src_vxlan->dev->tstats); @@ -2239,9 +2239,15 @@ static void vxlan_encap_bypass(struct sk_buff *skb, struct vxlan_dev *src_vxlan, #endif } + rcu_read_lock(); + dev = skb->dev; + if (unlikely(!(dev->flags & IFF_UP))) { + kfree_skb(skb); + goto drop; + } + if (dst_vxlan->cfg.flags & VXLAN_F_LEARN) - vxlan_snoop(skb->dev, &loopback, eth_hdr(skb)->h_source, 0, - vni); + vxlan_snoop(dev, &loopback, eth_hdr(skb)->h_source, 0, vni); u64_stats_update_begin(&tx_stats->syncp); tx_stats->tx_packets++; @@ -2254,8 +2260,10 @@ static void vxlan_encap_bypass(struct sk_buff *skb, struct vxlan_dev *src_vxlan, rx_stats->rx_bytes += len; u64_stats_update_end(&rx_stats->syncp); } else { +drop: dev->stats.rx_dropped++; } + rcu_read_unlock(); } static int encap_bypass_if_local(struct sk_buff *skb, struct net_device *dev, -- cgit v1.2.3-58-ga151 From c65285428b6e7797f1bb063f33b0ae7e93397b7b Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Tue, 12 Feb 2019 13:10:00 +0000 Subject: sfc: initialise found bitmap in efx_ef10_mtd_probe The bitmap of found partitions in efx_ef10_mtd_probe was not initialised, causing partitions to be suppressed based off whatever value was in the bitmap at the start. Fixes: 3366463513f5 ("sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe") Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 2f2bda68d861..c08034154a9a 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -6115,7 +6115,7 @@ static int efx_ef10_mtd_probe_partition(struct efx_nic *efx, static int efx_ef10_mtd_probe(struct efx_nic *efx) { MCDI_DECLARE_BUF(outbuf, MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX); - DECLARE_BITMAP(found, EF10_NVRAM_PARTITION_COUNT); + DECLARE_BITMAP(found, EF10_NVRAM_PARTITION_COUNT) = { 0 }; struct efx_mcdi_mtd_partition *parts; size_t outlen, n_parts_total, i, n_parts; unsigned int type; -- cgit v1.2.3-58-ga151 From a7603ac1fc8ce1409f8ff70e6ce505f308b2c002 Mon Sep 17 00:00:00 2001 From: Matteo Croce Date: Mon, 11 Feb 2019 15:32:36 +0100 Subject: geneve: change NET_UDP_TUNNEL dependency to select Due to the depends on NET_UDP_TUNNEL, at the moment it is impossible to compile GENEVE if no other protocol depending on NET_UDP_TUNNEL is selected. Fix this changing the depends to a select, and drop NET_IP_TUNNEL from the select list, as it already depends on NET_UDP_TUNNEL. Signed-off-by: Matteo Croce Reviewed-and-tested-by: Andrea Claudi Tested-by: Davide Caratti Signed-off-by: David S. Miller --- drivers/net/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index edb1c023a753..21bf8ac78380 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -197,9 +197,9 @@ config VXLAN config GENEVE tristate "Generic Network Virtualization Encapsulation" - depends on INET && NET_UDP_TUNNEL + depends on INET depends on IPV6 || !IPV6 - select NET_IP_TUNNEL + select NET_UDP_TUNNEL select GRO_CELLS ---help--- This allows one to create geneve virtual interfaces that provide -- cgit v1.2.3-58-ga151 From 87454b6edc1b0143fdb3d9853285477e95af74a4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 11 Feb 2019 15:04:24 +0000 Subject: net: phylink: avoid resolving link state too early During testing on Armada 388 platforms, it was found with a certain module configuration that it was possible to trigger a kernel oops during the module load process, caused by the phylink resolver being triggered for a currently disabled interface. This problem was introduced by changing the way the SFP registration works, which now can result in the sfp link down notification being called during phylink_create(). Fixes: b5bfc21af5cb ("net: sfp: do not probe SFP module before we're attached") Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index e7becc7379d7..938803237d7f 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -474,6 +474,17 @@ static void phylink_run_resolve(struct phylink *pl) queue_work(system_power_efficient_wq, &pl->resolve); } +static void phylink_run_resolve_and_disable(struct phylink *pl, int bit) +{ + unsigned long state = pl->phylink_disable_state; + + set_bit(bit, &pl->phylink_disable_state); + if (state == 0) { + queue_work(system_power_efficient_wq, &pl->resolve); + flush_work(&pl->resolve); + } +} + static void phylink_fixed_poll(struct timer_list *t) { struct phylink *pl = container_of(t, struct phylink, link_poll); @@ -924,9 +935,7 @@ void phylink_stop(struct phylink *pl) if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio)) del_timer_sync(&pl->link_poll); - set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); - queue_work(system_power_efficient_wq, &pl->resolve); - flush_work(&pl->resolve); + phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED); } EXPORT_SYMBOL_GPL(phylink_stop); @@ -1632,9 +1641,7 @@ static void phylink_sfp_link_down(void *upstream) ASSERT_RTNL(); - set_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state); - queue_work(system_power_efficient_wq, &pl->resolve); - flush_work(&pl->resolve); + phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_LINK); } static void phylink_sfp_link_up(void *upstream) -- cgit v1.2.3-58-ga151 From 29dded89e80e3fff61efb34f07a8a3fba3ea146d Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 11 Feb 2019 18:04:17 +0200 Subject: net/mlx4_en: Force CHECKSUM_NONE for short ethernet frames When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, it is not guaranteed. For example, switches might choose to make other use of these octets. This repeatedly causes kernel hardware checksum fault. Prior to the cited commit below, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it does not worth the effort as the packets are so small that CHECKSUM_COMPLETE has no significant advantage. Future work: when reporting checksum complete is not an option for IP non-TCP/UDP packets, we can actually fallback to report checksum unnecessary, by looking at cqe IPOK bit. Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 9a0881cb7f51..6c01314e87b0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -617,6 +617,8 @@ static int get_fixed_ipv6_csum(__wsum hw_checksum, struct sk_buff *skb, } #endif +#define short_frame(size) ((size) <= ETH_ZLEN + ETH_FCS_LEN) + /* We reach this function only after checking that any of * the (IPv4 | IPv6) bits are set in cqe->status. */ @@ -624,9 +626,20 @@ static int check_csum(struct mlx4_cqe *cqe, struct sk_buff *skb, void *va, netdev_features_t dev_features) { __wsum hw_checksum = 0; + void *hdr; + + /* CQE csum doesn't cover padding octets in short ethernet + * frames. And the pad field is appended prior to calculating + * and appending the FCS field. + * + * Detecting these padded frames requires to verify and parse + * IP headers, so we simply force all those small frames to skip + * checksum complete. + */ + if (short_frame(skb->len)) + return -EINVAL; - void *hdr = (u8 *)va + sizeof(struct ethhdr); - + hdr = (u8 *)va + sizeof(struct ethhdr); hw_checksum = csum_unfold((__force __sum16)cqe->checksum); if (cqe->vlan_my_qpn & cpu_to_be32(MLX4_CQE_CVLAN_PRESENT_MASK) && @@ -819,6 +832,11 @@ xdp_drop_no_cnt: skb_record_rx_queue(skb, cq_ring); if (likely(dev->features & NETIF_F_RXCSUM)) { + /* TODO: For IP non TCP/UDP packets when csum complete is + * not an option (not supported or any other reason) we can + * actually check cqe IPOK status bit and report + * CHECKSUM_UNNECESSARY rather than CHECKSUM_NONE + */ if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && -- cgit v1.2.3-58-ga151 From e1f1bd9bfbedcfce428ee7e1b82a6ec12d4c3863 Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Mon, 11 Feb 2019 19:17:43 +0200 Subject: net: ena: fix race between link up and device initalization Fix race condition between ena_update_on_link_change() and ena_restore_device(). This race can occur if link notification arrives while the driver is performing a reset sequence. In this case link can be set up, enabling the device, before it is fully restored. If packets are sent at this time, the driver might access uninitialized data structures, causing kernel crash. Move the clearing of ENA_FLAG_ONGOING_RESET and netif_carrier_on() after ena_up() to ensure the device is ready when link is set up. Fixes: d18e4f683445 ("net: ena: fix race condition between device reset and link up setup") Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index a70bb1bb90e7..a6eacf2099c3 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -2663,11 +2663,6 @@ static int ena_restore_device(struct ena_adapter *adapter) goto err_device_destroy; } - clear_bit(ENA_FLAG_ONGOING_RESET, &adapter->flags); - /* Make sure we don't have a race with AENQ Links state handler */ - if (test_bit(ENA_FLAG_LINK_UP, &adapter->flags)) - netif_carrier_on(adapter->netdev); - rc = ena_enable_msix_and_set_admin_interrupts(adapter, adapter->num_queues); if (rc) { @@ -2684,6 +2679,11 @@ static int ena_restore_device(struct ena_adapter *adapter) } set_bit(ENA_FLAG_DEVICE_RUNNING, &adapter->flags); + + clear_bit(ENA_FLAG_ONGOING_RESET, &adapter->flags); + if (test_bit(ENA_FLAG_LINK_UP, &adapter->flags)) + netif_carrier_on(adapter->netdev); + mod_timer(&adapter->timer_service, round_jiffies(jiffies + HZ)); dev_err(&pdev->dev, "Device reset completed successfully, Driver info: %s\n", -- cgit v1.2.3-58-ga151 From d9b8656da92223eb004b4f4db74fe48e7433f7b2 Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Mon, 11 Feb 2019 19:17:44 +0200 Subject: net: ena: update driver version from 2.0.2 to 2.0.3 Update driver version due to bug fix. Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h index dc8b6173d8d8..63870072cbbd 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.h +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h @@ -45,7 +45,7 @@ #define DRV_MODULE_VER_MAJOR 2 #define DRV_MODULE_VER_MINOR 0 -#define DRV_MODULE_VER_SUBMINOR 2 +#define DRV_MODULE_VER_SUBMINOR 3 #define DRV_MODULE_NAME "ena" #ifndef DRV_MODULE_VERSION -- cgit v1.2.3-58-ga151 From 2fdeee2549231b1f989f011bb18191f5660d3745 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 11 Feb 2019 21:59:51 -0800 Subject: team: avoid complex list operations in team_nl_cmd_options_set() The current opt_inst_list operations inside team_nl_cmd_options_set() is too complex to track: LIST_HEAD(opt_inst_list); nla_for_each_nested(...) { list_for_each_entry(opt_inst, &team->option_inst_list, list) { if (__team_option_inst_tmp_find(&opt_inst_list, opt_inst)) continue; list_add(&opt_inst->tmp_list, &opt_inst_list); } } team_nl_send_event_options_get(team, &opt_inst_list); as while we retrieve 'opt_inst' from team->option_inst_list, it could be added to the local 'opt_inst_list' for multiple times. The __team_option_inst_tmp_find() doesn't work, as the setter team_mode_option_set() still calls team->ops.exit() which uses ->tmp_list too in __team_options_change_check(). Simplify the list operations by moving the 'opt_inst_list' and team_nl_send_event_options_get() into the nla_for_each_nested() loop so that it can be guranteed that we won't insert a same list entry for multiple times. Therefore, __team_option_inst_tmp_find() can be removed too. Fixes: 4fb0534fb7bb ("team: avoid adding twice the same option to the event list") Fixes: 2fcdb2c9e659 ("team: allow to send multiple set events in one message") Reported-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com Reported-by: syzbot+68ee510075cf64260cc4@syzkaller.appspotmail.com Cc: Jiri Pirko Cc: Paolo Abeni Signed-off-by: Cong Wang Acked-by: Jiri Pirko Reviewed-by: Paolo Abeni Signed-off-by: David S. Miller --- drivers/net/team/team.c | 27 +++++---------------------- 1 file changed, 5 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index afd9d25d1992..958f1cf67282 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -256,17 +256,6 @@ static void __team_option_inst_mark_removed_port(struct team *team, } } -static bool __team_option_inst_tmp_find(const struct list_head *opts, - const struct team_option_inst *needle) -{ - struct team_option_inst *opt_inst; - - list_for_each_entry(opt_inst, opts, tmp_list) - if (opt_inst == needle) - return true; - return false; -} - static int __team_options_register(struct team *team, const struct team_option *option, size_t option_count) @@ -2460,7 +2449,6 @@ static int team_nl_cmd_options_set(struct sk_buff *skb, struct genl_info *info) int err = 0; int i; struct nlattr *nl_option; - LIST_HEAD(opt_inst_list); rtnl_lock(); @@ -2480,6 +2468,7 @@ static int team_nl_cmd_options_set(struct sk_buff *skb, struct genl_info *info) struct nlattr *opt_attrs[TEAM_ATTR_OPTION_MAX + 1]; struct nlattr *attr; struct nlattr *attr_data; + LIST_HEAD(opt_inst_list); enum team_option_type opt_type; int opt_port_ifindex = 0; /* != 0 for per-port options */ u32 opt_array_index = 0; @@ -2584,23 +2573,17 @@ static int team_nl_cmd_options_set(struct sk_buff *skb, struct genl_info *info) if (err) goto team_put; opt_inst->changed = true; - - /* dumb/evil user-space can send us duplicate opt, - * keep only the last one - */ - if (__team_option_inst_tmp_find(&opt_inst_list, - opt_inst)) - continue; - list_add(&opt_inst->tmp_list, &opt_inst_list); } if (!opt_found) { err = -ENOENT; goto team_put; } - } - err = team_nl_send_event_options_get(team, &opt_inst_list); + err = team_nl_send_event_options_get(team, &opt_inst_list); + if (err) + break; + } team_put: team_nl_team_put(team); -- cgit v1.2.3-58-ga151 From fb35c534b7881c0f7f94b01ddd95a9b17483252f Mon Sep 17 00:00:00 2001 From: Maria Pasechnik Date: Sun, 3 Feb 2019 17:55:09 +0200 Subject: net/mlx5e: Fix NULL pointer derefernce in set channels error flow New channels are applied to the priv channels only after they are successfully opened. Then, the indirection table should be built according to the new number of channels. Currently, such build is preformed independently of whether the channels opening is successful, and is not reverted on failure. The bug is caused due to removal of rss params from channels struct and moving it to priv struct. That change cause to independency between channels and rss params. This causes a crash on a later point, when accessing rqn of a non existing channel. This patch fixes it by moving the indirection table build right before switching the priv channels to new channels struct, after the new set of channels was successfully opened. Fixes: bbeb53b8b2c9 ("net/mlx5e: Move RSS params to a dedicated struct") Signed-off-by: Maria Pasechnik Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 3bbccead2f63..47233b9a4f81 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -354,9 +354,6 @@ int mlx5e_ethtool_set_channels(struct mlx5e_priv *priv, new_channels.params = priv->channels.params; new_channels.params.num_channels = count; - if (!netif_is_rxfh_configured(priv->netdev)) - mlx5e_build_default_indir_rqt(priv->rss_params.indirection_rqt, - MLX5E_INDIR_RQT_SIZE, count); if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { priv->channels.params = new_channels.params; @@ -372,6 +369,10 @@ int mlx5e_ethtool_set_channels(struct mlx5e_priv *priv, if (arfs_enabled) mlx5e_arfs_disable(priv); + if (!netif_is_rxfh_configured(priv->netdev)) + mlx5e_build_default_indir_rqt(priv->rss_params.indirection_rqt, + MLX5E_INDIR_RQT_SIZE, count); + /* Switch to new channels, set new parameters and close old ones */ mlx5e_switch_priv_channels(priv, &new_channels, NULL); -- cgit v1.2.3-58-ga151 From 4cab346bcf74f44665d57726ec2bccff6e679619 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Thu, 7 Feb 2019 09:22:56 -0600 Subject: net/mlx5: No command allowed when command interface is not ready When EEH is injected and PCI bus stalls, mlx5's pci error detect function is called to deactivate the command interface and tear down the device. The issue is that there can be a thread that already passed MLX5_DEVICE_STATE_INTERNAL_ERROR check, it will send the command and stuck in the wait_func. Solution: Add function mlx5_cmd_flush to disable command interface and clear all the pending commands. When device state is set to MLX5_DEVICE_STATE_INTERNAL_ERROR, call mlx5_cmd_flush to ensure all pending threads waiting for firmware commands completion are terminated. Fixes: c1d4d2e92ad6 ("net/mlx5: Avoid calling sleeping function by the health poll thread") Signed-off-by: Huy Nguyen Reviewed-by: Daniel Jurgens Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 18 ++++++++++++++++++ drivers/net/ethernet/mellanox/mlx5/core/health.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h | 1 + 3 files changed, 20 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 3e0fa8a8077b..e267ff93e8a8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -1583,6 +1583,24 @@ no_trig: spin_unlock_irqrestore(&dev->cmd.alloc_lock, flags); } +void mlx5_cmd_flush(struct mlx5_core_dev *dev) +{ + struct mlx5_cmd *cmd = &dev->cmd; + int i; + + for (i = 0; i < cmd->max_reg_cmds; i++) + while (down_trylock(&cmd->sem)) + mlx5_cmd_trigger_completions(dev); + + while (down_trylock(&cmd->pages_sem)) + mlx5_cmd_trigger_completions(dev); + + /* Unlock cmdif */ + up(&cmd->pages_sem); + for (i = 0; i < cmd->max_reg_cmds; i++) + up(&cmd->sem); +} + static int status_to_err(u8 status) { return status ? -1 : 0; /* TBD more meaningful codes */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c index 196c07383082..cb9fa3430c53 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/health.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c @@ -103,7 +103,7 @@ void mlx5_enter_error_state(struct mlx5_core_dev *dev, bool force) mlx5_core_err(dev, "start\n"); if (pci_channel_offline(dev->pdev) || in_fatal(dev) || force) { dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR; - mlx5_cmd_trigger_completions(dev); + mlx5_cmd_flush(dev); } mlx5_notifier_call_chain(dev->priv.events, MLX5_DEV_EVENT_SYS_ERROR, (void *)1); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h index 5300b0b6d836..4fdac020b795 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h @@ -126,6 +126,7 @@ u64 mlx5_read_internal_timer(struct mlx5_core_dev *dev, struct ptp_system_timestamp *sts); void mlx5_cmd_trigger_completions(struct mlx5_core_dev *dev); +void mlx5_cmd_flush(struct mlx5_core_dev *dev); int mlx5_cq_debugfs_init(struct mlx5_core_dev *dev); void mlx5_cq_debugfs_cleanup(struct mlx5_core_dev *dev); -- cgit v1.2.3-58-ga151 From 5400261e4d293d741c5b71a07f6eaabe2c8d3f1b Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 22 Jan 2019 14:18:04 +0200 Subject: net/mlx5: Fix a compilation warning in events.c Eliminate the following compilation warning: drivers/net/ethernet/mellanox/mlx5/core/events.c: warning: 'error_str' may be used uninitialized in this function [-Wuninitialized]: => 238:3 Fixes: c2fb3db22d35 ("net/mlx5: Rework handling of port module events") Signed-off-by: Tariq Toukan Reviewed-by: Mikhael Goikhman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/events.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/events.c b/drivers/net/ethernet/mellanox/mlx5/core/events.c index fbc42b7252a9..503035469d2d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/events.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/events.c @@ -211,11 +211,10 @@ static int port_module(struct notifier_block *nb, unsigned long type, void *data enum port_module_event_status_type module_status; enum port_module_event_error_type error_type; struct mlx5_eqe_port_module *module_event_eqe; - const char *status_str, *error_str; + const char *status_str; u8 module_num; module_event_eqe = &eqe->data.port_module; - module_num = module_event_eqe->module; module_status = module_event_eqe->module_status & PORT_MODULE_EVENT_MODULE_STATUS_MASK; error_type = module_event_eqe->error_type & @@ -223,25 +222,27 @@ static int port_module(struct notifier_block *nb, unsigned long type, void *data if (module_status < MLX5_MODULE_STATUS_NUM) events->pme_stats.status_counters[module_status]++; - status_str = mlx5_pme_status_to_string(module_status); - if (module_status == MLX5_MODULE_STATUS_ERROR) { + if (module_status == MLX5_MODULE_STATUS_ERROR) if (error_type < MLX5_MODULE_EVENT_ERROR_NUM) events->pme_stats.error_counters[error_type]++; - error_str = mlx5_pme_error_to_string(error_type); - } if (!printk_ratelimit()) return NOTIFY_OK; - if (module_status == MLX5_MODULE_STATUS_ERROR) + module_num = module_event_eqe->module; + status_str = mlx5_pme_status_to_string(module_status); + if (module_status == MLX5_MODULE_STATUS_ERROR) { + const char *error_str = mlx5_pme_error_to_string(error_type); + mlx5_core_err(events->dev, "Port module event[error]: module %u, %s, %s\n", module_num, status_str, error_str); - else + } else { mlx5_core_info(events->dev, "Port module event: module %u, %s\n", module_num, status_str); + } return NOTIFY_OK; } -- cgit v1.2.3-58-ga151 From 407e17b1a69a51ba9a512a04342da56c1f931df4 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 11 Feb 2019 16:27:02 -0800 Subject: net/mlx5e: XDP, fix redirect resources availability check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently mlx5 driver creates xdp redirect hw queues unconditionally on netdevice open, This is great until someone starts redirecting XDP traffic via ndo_xdp_xmit on mlx5 device and changes the device configuration at the same time, this might cause crashes, since the other device's napi is not aware of the mlx5 state change (resources un-availability). To fix this we must synchronize with other devices napi's on the system. Added a new flag under mlx5e_priv to determine XDP TX resources are available, set/clear it up when necessary and use synchronize_rcu() when the flag is turned off, so other napi's are in-sync with it, before we actually cleanup the hw resources. The flag is tested prior to committing to transmit on mlx5e_xdp_xmit, and it is sufficient to determine if it safe to transmit or not. The other two internal flags (MLX5E_STATE_OPENED and MLX5E_SQ_STATE_ENABLED) become unnecessary. Thus, they are removed from data path. Fixes: 58b99ee3e3eb ("net/mlx5e: Add support for XDP_REDIRECT in device-out side") Reported-by: Toke Høiland-Jørgensen Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c | 6 ++---- drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h | 17 +++++++++++++++++ drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 ++ 4 files changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 8fa8fdd30b85..448a92561567 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -657,6 +657,7 @@ struct mlx5e_channel_stats { enum { MLX5E_STATE_OPENED, MLX5E_STATE_DESTROYING, + MLX5E_STATE_XDP_TX_ENABLED, }; struct mlx5e_rqt { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c index 3740177eed09..03b2a9f9c589 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c @@ -365,7 +365,8 @@ int mlx5e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, int sq_num; int i; - if (unlikely(!test_bit(MLX5E_STATE_OPENED, &priv->state))) + /* this flag is sufficient, no need to test internal sq state */ + if (unlikely(!mlx5e_xdp_tx_is_enabled(priv))) return -ENETDOWN; if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) @@ -378,9 +379,6 @@ int mlx5e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, sq = &priv->channels.c[sq_num]->xdpsq; - if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &sq->state))) - return -ENETDOWN; - for (i = 0; i < n; i++) { struct xdp_frame *xdpf = frames[i]; struct mlx5e_xdp_info xdpi; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h index 3a67cb3cd179..ee27a7c8cd87 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h @@ -50,6 +50,23 @@ void mlx5e_xdp_rx_poll_complete(struct mlx5e_rq *rq); int mlx5e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, u32 flags); +static inline void mlx5e_xdp_tx_enable(struct mlx5e_priv *priv) +{ + set_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state); +} + +static inline void mlx5e_xdp_tx_disable(struct mlx5e_priv *priv) +{ + clear_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state); + /* let other device's napi(s) see our new state */ + synchronize_rcu(); +} + +static inline bool mlx5e_xdp_tx_is_enabled(struct mlx5e_priv *priv) +{ + return test_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state); +} + static inline void mlx5e_xmit_xdp_doorbell(struct mlx5e_xdpsq *sq) { if (sq->doorbell_cseg) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 01819e5c9975..93e50ccd44c3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2938,6 +2938,7 @@ void mlx5e_activate_priv_channels(struct mlx5e_priv *priv) mlx5e_build_tx2sq_maps(priv); mlx5e_activate_channels(&priv->channels); + mlx5e_xdp_tx_enable(priv); netif_tx_start_all_queues(priv->netdev); if (mlx5e_is_vport_rep(priv)) @@ -2959,6 +2960,7 @@ void mlx5e_deactivate_priv_channels(struct mlx5e_priv *priv) */ netif_tx_stop_all_queues(priv->netdev); netif_tx_disable(priv->netdev); + mlx5e_xdp_tx_disable(priv); mlx5e_deactivate_channels(&priv->channels); } -- cgit v1.2.3-58-ga151 From b79555d5d8d32643e9d7193341dcaff13bf9ffcd Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 12 Feb 2019 19:56:15 +0100 Subject: net: phy: fix interrupt handling in non-started states phylib enables interrupts before phy_start() has been called, and if we receive an interrupt in a non-started state, the interrupt handler returns IRQ_NONE. This causes problems with at least one Marvell chip as reported by Andrew. Fix this by handling interrupts the same as in phy_mac_interrupt(), basically always running the phylib state machine. It knows when it has to do something and when not. This change allows to handle interrupts gracefully even if they occur in a non-started state. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Reported-by: Andrew Lunn Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 189cd2048c3a..ca5e0c0f018c 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -762,9 +762,6 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) { struct phy_device *phydev = phy_dat; - if (!phy_is_started(phydev)) - return IRQ_NONE; /* It can't be ours. */ - if (phydev->drv->did_interrupt && !phydev->drv->did_interrupt(phydev)) return IRQ_NONE; -- cgit v1.2.3-58-ga151 From 7c0db24cc431e2196d98a5d5ddaa9088e2fcbfe5 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Mon, 11 Feb 2019 13:40:21 -0500 Subject: dsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exit The GPIO interrupt controller on the espressobin board only supports edge interrupts. If one enables the use of hardware interrupts in the device tree for the 88E6341, it is possible to miss an edge. When this happens, the INTn pin on the Marvell switch is stuck low and no further interrupts occur. I found after adding debug statements to mv88e6xxx_g1_irq_thread_work() that there is a race in handling device interrupts (e.g. PHY link interrupts). Some interrupts are directly cleared by reading the Global 1 status register. However, the device interrupt flag, for example, is not cleared until all the unmasked SERDES and PHY ports are serviced. This is done by reading the relevant SERDES and PHY status register. The code only services interrupts whose status bit is set at the time of reading its status register. If an interrupt event occurs after its status is read and before all interrupts are serviced, then this event will not be serviced and the INTn output pin will remain low. This is not a problem with polling or level interrupts since the handler will be called again to process the event. However, it's a big problem when using level interrupts. The fix presented here is to add a loop around the code servicing switch interrupts. If any pending interrupts remain after the current set has been handled, we loop and process the new set. If there are no pending interrupts after servicing, we are sure that INTn has gone high and we will get an edge when a new event occurs. Tested on espressobin board. Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.") Signed-off-by: John David Anglin Tested-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 8dca2c949e73..12fd7ce3f1ff 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -261,6 +261,7 @@ static irqreturn_t mv88e6xxx_g1_irq_thread_work(struct mv88e6xxx_chip *chip) unsigned int sub_irq; unsigned int n; u16 reg; + u16 ctl1; int err; mutex_lock(&chip->reg_lock); @@ -270,13 +271,28 @@ static irqreturn_t mv88e6xxx_g1_irq_thread_work(struct mv88e6xxx_chip *chip) if (err) goto out; - for (n = 0; n < chip->g1_irq.nirqs; ++n) { - if (reg & (1 << n)) { - sub_irq = irq_find_mapping(chip->g1_irq.domain, n); - handle_nested_irq(sub_irq); - ++nhandled; + do { + for (n = 0; n < chip->g1_irq.nirqs; ++n) { + if (reg & (1 << n)) { + sub_irq = irq_find_mapping(chip->g1_irq.domain, + n); + handle_nested_irq(sub_irq); + ++nhandled; + } } - } + + mutex_lock(&chip->reg_lock); + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &ctl1); + if (err) + goto unlock; + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_STS, ®); +unlock: + mutex_unlock(&chip->reg_lock); + if (err) + goto out; + ctl1 &= GENMASK(chip->g1_irq.nirqs, 0); + } while (reg & ctl1); + out: return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); } -- cgit v1.2.3-58-ga151 From 8d6ea932856c7087ce8c3d0e79494b7d5386f962 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 13 Feb 2019 11:23:04 +0300 Subject: net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend() The value of ->num_ports comes from bcm_sf2_sw_probe() and it is less than or equal to DSA_MAX_PORTS. The ds->ports[] array is used inside the dsa_is_user_port() and dsa_is_cpu_port() functions. The ds->ports[] array is allocated in dsa_switch_alloc() and it has ds->num_ports elements so this leads to a static checker warning about a potential out of bounds read. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Dan Carpenter Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 361fbde76654..17ec32b0a1cc 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -690,7 +690,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds) * port, the other ones have already been disabled during * bcm_sf2_sw_setup */ - for (port = 0; port < DSA_MAX_PORTS; port++) { + for (port = 0; port < ds->num_ports; port++) { if (dsa_is_user_port(ds, port) || dsa_is_cpu_port(ds, port)) bcm_sf2_port_disable(ds, port, NULL); } -- cgit v1.2.3-58-ga151 From a2fc9d7e36f6d484d9be4a0a204400aaf6059544 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 13 Feb 2019 20:11:40 +0100 Subject: net: phy: don't use locking in phy_is_started Russell suggested to remove the locking from phy_is_started() because the read is atomic anyway and actually the locking may be more misleading. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Suggested-by: Russell King - ARM Linux admin Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 11 +++++------ include/linux/phy.h | 15 +-------------- 2 files changed, 6 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index ca5e0c0f018c..602816d70281 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -553,7 +553,7 @@ int phy_start_aneg(struct phy_device *phydev) if (err < 0) goto out_unlock; - if (__phy_is_started(phydev)) { + if (phy_is_started(phydev)) { if (phydev->autoneg == AUTONEG_ENABLE) { err = phy_check_link_status(phydev); } else { @@ -709,7 +709,7 @@ void phy_stop_machine(struct phy_device *phydev) cancel_delayed_work_sync(&phydev->state_queue); mutex_lock(&phydev->lock); - if (__phy_is_started(phydev)) + if (phy_is_started(phydev)) phydev->state = PHY_UP; mutex_unlock(&phydev->lock); } @@ -839,15 +839,14 @@ EXPORT_SYMBOL(phy_stop_interrupts); */ void phy_stop(struct phy_device *phydev) { - mutex_lock(&phydev->lock); - - if (!__phy_is_started(phydev)) { + if (!phy_is_started(phydev)) { WARN(1, "called from state %s\n", phy_state_to_str(phydev->state)); - mutex_unlock(&phydev->lock); return; } + mutex_lock(&phydev->lock); + if (phy_interrupt_is_valid(phydev)) phy_disable_interrupts(phydev); diff --git a/include/linux/phy.h b/include/linux/phy.h index ef20aeea10cc..127fcc9c3778 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -674,26 +674,13 @@ phy_lookup_setting(int speed, int duplex, const unsigned long *mask, size_t phy_speeds(unsigned int *speeds, size_t size, unsigned long *mask); -static inline bool __phy_is_started(struct phy_device *phydev) -{ - WARN_ON(!mutex_is_locked(&phydev->lock)); - - return phydev->state >= PHY_UP; -} - /** * phy_is_started - Convenience function to check whether PHY is started * @phydev: The phy_device struct */ static inline bool phy_is_started(struct phy_device *phydev) { - bool started; - - mutex_lock(&phydev->lock); - started = __phy_is_started(phydev); - mutex_unlock(&phydev->lock); - - return started; + return phydev->state >= PHY_UP; } void phy_resolve_aneg_linkmode(struct phy_device *phydev); -- cgit v1.2.3-58-ga151 From a20049071796691cf99eb6433968fc3c27632b95 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 13 Feb 2019 20:12:54 +0100 Subject: net: phy: fix potential race in the phylib state machine Russell reported the following race in the phylib state machine (quoting from his mail): if (phy_polling_mode(phydev) && phy_is_started(phydev)) phy_queue_state_machine(phydev, PHY_STATE_TIME); state = PHY_UP thread 0 thread 1 phy_disconnect() +-phy_is_started() phy_is_started() | `-phy_stop() +-phydev->state = PHY_HALTED `-phy_stop_machine() `-cancel_delayed_work_sync() phy_queue_state_machine() `-mod_delayed_work() At this point, the phydev->state_queue() has been added back onto the system workqueue despite phy_stop_machine() having been called and cancel_delayed_work_sync() called on it. Fix this by protecting the complete operation in thread 0. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Reported-by: Russell King - ARM Linux admin Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 602816d70281..c5675df5fc6f 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -985,8 +985,10 @@ void phy_state_machine(struct work_struct *work) * state machine would be pointless and possibly error prone when * called from phy_disconnect() synchronously. */ + mutex_lock(&phydev->lock); if (phy_polling_mode(phydev) && phy_is_started(phydev)) phy_queue_state_machine(phydev, PHY_STATE_TIME); + mutex_unlock(&phydev->lock); } /** -- cgit v1.2.3-58-ga151 From c969c6e7ab8cb42b5c787c567615474fdbad9d6a Mon Sep 17 00:00:00 2001 From: Huang Zijiang Date: Thu, 14 Feb 2019 14:41:45 +0800 Subject: net: hns: Fix object reference leaks in hns_dsaf_roce_reset() The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by: Huang Zijiang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c index 3b9e74be5fbd..b8155f5e71b4 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c @@ -3081,6 +3081,7 @@ int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool dereset) dsaf_dev = dev_get_drvdata(&pdev->dev); if (!dsaf_dev) { dev_err(&pdev->dev, "dsaf_dev is NULL\n"); + put_device(&pdev->dev); return -ENODEV; } @@ -3088,6 +3089,7 @@ int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool dereset) if (AE_IS_VER1(dsaf_dev->dsaf_ver)) { dev_err(dsaf_dev->dev, "%s v1 chip doesn't support RoCE!\n", dsaf_dev->ae_dev.name); + put_device(&pdev->dev); return -ENODEV; } -- cgit v1.2.3-58-ga151 From f9bcc9f3ee4fbbe8f11dfec76745476f5780517e Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Thu, 14 Feb 2019 11:15:35 -0500 Subject: net: ethernet: freescale: set FEC ethtool regs version Currently the ethtool_regs version is set to 0 for FEC devices. Use this field to store the register dump version exposed by the kernel. The choosen version 2 corresponds to the kernel compile test: #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_COMPILE_TEST) and version 1 corresponds to the opposite. Binaries of ethtool unaware of this version will dump the whole set as usual. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 2370dc204202..697c2427f2b7 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2098,6 +2098,7 @@ static int fec_enet_get_regs_len(struct net_device *ndev) #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \ defined(CONFIG_ARM64) || defined(CONFIG_COMPILE_TEST) +static __u32 fec_enet_register_version = 2; static u32 fec_enet_register_offset[] = { FEC_IEVENT, FEC_IMASK, FEC_R_DES_ACTIVE_0, FEC_X_DES_ACTIVE_0, FEC_ECNTRL, FEC_MII_DATA, FEC_MII_SPEED, FEC_MIB_CTRLSTAT, FEC_R_CNTRL, @@ -2128,6 +2129,7 @@ static u32 fec_enet_register_offset[] = { IEEE_R_FDXFC, IEEE_R_OCTETS_OK }; #else +static __u32 fec_enet_register_version = 1; static u32 fec_enet_register_offset[] = { FEC_ECNTRL, FEC_IEVENT, FEC_IMASK, FEC_IVEC, FEC_R_DES_ACTIVE_0, FEC_R_DES_ACTIVE_1, FEC_R_DES_ACTIVE_2, FEC_X_DES_ACTIVE_0, @@ -2149,6 +2151,8 @@ static void fec_enet_get_regs(struct net_device *ndev, u32 *buf = (u32 *)regbuf; u32 i, off; + regs->version = fec_enet_register_version; + memset(buf, 0, regs->len); for (i = 0; i < ARRAY_SIZE(fec_enet_register_offset); i++) { -- cgit v1.2.3-58-ga151