From 351fc6d1a5175d587d4f2b00ec7bff79b13ec48a Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Mon, 21 Nov 2011 11:54:07 -0700 Subject: PCI: Fix starting basis for resource requests pci_revert_fw_address() is used to reinstate a PCI device's original FW-assigned BIOS BAR value(s) if normal resource assignment fails. When attempting to reinstate an address, the point within the resource tree from which to attempt the new resource request should be the parent resource corresponding to the device, not the base of the resource tree (ioport_resource or iomem_resource). For PCI devices this would typically be the resource corresponding to the upstream PCI host bridge or P2P bridge aperture. This patch sets the point within the resource tree to attempt a new resource assignment request to the PCI device's parent resource and only if that fails does it fall back to the base ioport_resource or iomem_resource. Signed-off-by: Myron Stowe Signed-off-by: Jesse Barnes --- drivers/pci/setup-res.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index b66bfdbd21f7..3cf47d34becf 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -165,15 +165,19 @@ static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev, resource_size_t start, end; int ret = 0; - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - else - root = &iomem_resource; - start = res->start; end = res->end; res->start = dev->fw_addr[resno]; res->end = res->start + size - 1; + + root = pci_find_parent_resource(dev, res); + if (!root) { + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + else + root = &iomem_resource; + } + dev_info(&dev->dev, "BAR %d: trying firmware assignment %pR\n", resno, res); conflict = request_resource_conflict(root, res); -- cgit v1.2.3-58-ga151 From 6535943fbf25c8e9419a6b20ca992633baa0bf99 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Mon, 21 Nov 2011 11:54:19 -0700 Subject: x86/PCI: Convert maintaining FW-assigned BIOS BAR values to use a list This patch converts the underlying maintenance aspects of FW-assigned BIOS BAR values from a statically allocated array within struct pci_dev to a list of temporary, stand alone, entries. Signed-off-by: Myron Stowe Signed-off-by: Jesse Barnes --- arch/x86/pci/i386.c | 4 +++- drivers/pci/setup-res.c | 24 +++++++++++++++++++++--- include/linux/pci.h | 1 - 3 files changed, 24 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 5a1edf2b5386..33e6a0b995fc 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -261,7 +261,8 @@ static void __init pcibios_allocate_resources(int pass) idx, r, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { /* We'll assign a new address later */ - dev->fw_addr[idx] = r->start; + pcibios_save_fw_addr(dev, + idx, r->start); r->end -= r->start; r->start = 0; } @@ -307,6 +308,7 @@ static int __init pcibios_assign_resources(void) } pci_assign_unassigned_resources(); + pcibios_fw_addr_list_del(); return 0; } diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 3cf47d34becf..85c8470c35e2 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -158,16 +158,34 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev, return ret; } +/* + * Generic function that returns a value indicating that the device's + * original BIOS BAR address was not saved and so is not available for + * reinstatement. + * + * Can be over-ridden by architecture specific code that implements + * reinstatement functionality rather than leaving it disabled when + * normal allocation attempts fail. + */ +resource_size_t __weak pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx) +{ + return 0; +} + static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev, int resno, resource_size_t size) { struct resource *root, *conflict; - resource_size_t start, end; + resource_size_t fw_addr, start, end; int ret = 0; + fw_addr = pcibios_retrieve_fw_addr(dev, resno); + if (!fw_addr) + return 1; + start = res->start; end = res->end; - res->start = dev->fw_addr[resno]; + res->start = fw_addr; res->end = res->start + size - 1; root = pci_find_parent_resource(dev, res); @@ -271,7 +289,7 @@ int pci_assign_resource(struct pci_dev *dev, int resno) * where firmware left it. That at least has a chance of * working, which is better than just leaving it disabled. */ - if (ret < 0 && dev->fw_addr[resno]) + if (ret < 0) ret = pci_revert_fw_address(res, dev, resno, size); if (!ret) { diff --git a/include/linux/pci.h b/include/linux/pci.h index 8e9a307e58b8..4afabb1d2d27 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -299,7 +299,6 @@ struct pci_dev { */ unsigned int irq; struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */ - resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */ /* These fields are used by common fixups */ unsigned int transparent:1; /* Transparent PCI bridge */ -- cgit v1.2.3-58-ga151 From f382a086f3129edc152b8044b69ccc6682e637bb Mon Sep 17 00:00:00 2001 From: Amos Kong Date: Fri, 25 Nov 2011 15:03:07 +0800 Subject: PCI: Can continually add funcs after adding func0 Boot up a KVM guest, and hotplug multifunction devices(func1,func2,func0,func3) to guest. for i in 1 2 0 3;do qemu-img create /tmp/resize$i.qcow2 1G -f qcow2 (qemu) drive_add 0x11.$i id=drv11$i,if=none,file=/tmp/resize$i.qcow2 (qemu) device_add virtio-blk-pci,id=dev11$i,drive=drv11$i,addr=0x11.$i,multifunction=on done In linux kernel, when func0 of the slot is hot-added, the whole slot will be marked as 'enabled', then driver will ignore other new hotadded funcs. But in Win7 & WinXP, we can continaully add other funcs after adding func0, all funcs will be added in guest. drivers/pci/hotplug/acpiphp_glue.c: static int acpiphp_check_bridge(struct acpiphp_bridge *bridge) { .... for (slot = bridge->slots; slot; slot = slot->next) { if (slot->flags & SLOT_ENABLED) { acpiphp_disable_slot() else acpiphp_enable_slot() .... | } v enable_device() | v //only don't enable slot if func0 is not added list_for_each_entry(func, &slot->funcs, sibling) { ... } slot->flags |= SLOT_ENABLED; //mark slot to 'enabled' This patch just make pci driver can continaully add funcs after adding func 0. Only mark slot to 'enabled' when all funcs are added. For pci multifunction hotplug, we can add functions one by one(func 0 is necessary), and all functions will be removed in one time. Signed-off-by: Amos Kong Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp_glue.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 9ddf69e3bbef..12d070ca7674 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -800,20 +800,10 @@ static int __ref enable_device(struct acpiphp_slot *slot) if (slot->flags & SLOT_ENABLED) goto err_exit; - /* sanity check: dev should be NULL when hot-plugged in */ - dev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0)); - if (dev) { - /* This case shouldn't happen */ - err("pci_dev structure already exists.\n"); - pci_dev_put(dev); - retval = -1; - goto err_exit; - } - num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0)); if (num == 0) { - err("No new device found\n"); - retval = -1; + /* Maybe only part of funcs are added. */ + dbg("No new device found\n"); goto err_exit; } @@ -848,11 +838,16 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_bus_add_devices(bus); + slot->flags |= SLOT_ENABLED; list_for_each_entry(func, &slot->funcs, sibling) { dev = pci_get_slot(bus, PCI_DEVFN(slot->device, func->function)); - if (!dev) + if (!dev) { + /* Do not set SLOT_ENABLED flag if some funcs + are not added. */ + slot->flags &= (~SLOT_ENABLED); continue; + } if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) { @@ -867,7 +862,6 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_dev_put(dev); } - slot->flags |= SLOT_ENABLED; err_exit: return retval; @@ -892,9 +886,12 @@ static int disable_device(struct acpiphp_slot *slot) { struct acpiphp_func *func; struct pci_dev *pdev; + struct pci_bus *bus = slot->bridge->pci_bus; - /* is this slot already disabled? */ - if (!(slot->flags & SLOT_ENABLED)) + /* The slot will be enabled when func 0 is added, so check + func 0 before disable the slot. */ + pdev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0)); + if (!pdev) goto err_exit; list_for_each_entry(func, &slot->funcs, sibling) { -- cgit v1.2.3-58-ga151 From 8f0cdddcd3f270901765fc909c3aee37a2091e78 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jan 2012 10:55:16 +0100 Subject: PCI: drivers/pci/hotplug/ibmphp_ebda.c: add missing iounmap Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // Signed-off-by: Julia Lawall Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/ibmphp_ebda.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index 2850e64dedae..714ca5c4ed50 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -368,8 +368,10 @@ int __init ibmphp_access_ebda (void) debug ("rio blk id: %x\n", blk_id); rio_table_ptr = kzalloc(sizeof(struct rio_table_hdr), GFP_KERNEL); - if (!rio_table_ptr) - return -ENOMEM; + if (!rio_table_ptr) { + rc = -ENOMEM; + goto out; + } rio_table_ptr->ver_num = readb (io_mem + offset); rio_table_ptr->scal_count = readb (io_mem + offset + 1); rio_table_ptr->riodev_count = readb (io_mem + offset + 2); -- cgit v1.2.3-58-ga151 From 6fbf9e7a90862988c278462d85ce9684605a52b2 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 12 Jan 2012 12:06:46 -0500 Subject: PCI: Introduce __pci_reset_function_locked to be used when holding device_lock. The use case of this is when a driver wants to call FLR when a device is attached to it using the SysFS "bind" or "unbind" functionality. The call chain when a user does "bind" looks as so: echo "0000:01.07.0" > /sys/bus/pci/drivers/XXXX/bind and ends up calling: driver_bind: device_lock(dev); <=== TAKES LOCK XXXX_probe: .. pci_enable_device() ...__pci_reset_function(), which calls pci_dev_reset(dev, 0): if (!0) { device_lock(dev) <==== DEADLOCK The __pci_reset_function_locked function allows the the drivers 'probe' function to call the "pci_reset_function" while still holding the driver mutex lock. Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 25 +++++++++++++++++++++++++ include/linux/pci.h | 1 + 2 files changed, 26 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index af295bb21d62..053670e09e2b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3162,6 +3162,31 @@ int __pci_reset_function(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(__pci_reset_function); +/** + * __pci_reset_function_locked - reset a PCI device function while holding + * the @dev mutex lock. + * @dev: PCI device to reset + * + * Some devices allow an individual function to be reset without affecting + * other functions in the same device. The PCI device must be responsive + * to PCI config space in order to use this function. + * + * The device function is presumed to be unused and the caller is holding + * the device mutex lock when this function is called. + * Resetting the device will make the contents of PCI configuration space + * random, so any caller of this must be prepared to reinitialise the + * device including MSI, bus mastering, BARs, decoding IO and memory spaces, + * etc. + * + * Returns 0 if the device function was successfully reset or negative if the + * device doesn't support resetting a single function. + */ +int __pci_reset_function_locked(struct pci_dev *dev) +{ + return pci_dev_reset(dev, 1); +} +EXPORT_SYMBOL_GPL(__pci_reset_function_locked); + /** * pci_probe_reset_function - check whether the device can be safely reset * @dev: PCI device to reset diff --git a/include/linux/pci.h b/include/linux/pci.h index 4afabb1d2d27..f44276049f4a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -816,6 +816,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq); int pcie_get_mps(struct pci_dev *dev); int pcie_set_mps(struct pci_dev *dev, int mps); int __pci_reset_function(struct pci_dev *dev); +int __pci_reset_function_locked(struct pci_dev *dev); int pci_reset_function(struct pci_dev *dev); void pci_update_resource(struct pci_dev *dev, int resno); int __must_check pci_assign_resource(struct pci_dev *dev, int i); -- cgit v1.2.3-58-ga151 From 11608318037f07fe08d64ebcd3f65691cfd77076 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 12 Jan 2012 12:06:47 -0500 Subject: xen/pciback: Support pci_reset_function, aka FLR or D3 support. We use the __pci_reset_function_locked to perform the action. Also on attaching ("bind") and detaching ("unbind") we save and restore the configuration states. When the device is disconnected from a guest we use the "pci_reset_function" to also reset the device before being passed to another guest. Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Jesse Barnes --- drivers/xen/xen-pciback/pci_stub.c | 41 +++++++++++++++++++++++++++++++++++--- drivers/xen/xen-pciback/pciback.h | 1 + 2 files changed, 39 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index 7944a17f5cbf..6f63b9d954fb 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -85,19 +85,34 @@ static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev) static void pcistub_device_release(struct kref *kref) { struct pcistub_device *psdev; + struct xen_pcibk_dev_data *dev_data; psdev = container_of(kref, struct pcistub_device, kref); + dev_data = pci_get_drvdata(psdev->dev); dev_dbg(&psdev->dev->dev, "pcistub_device_release\n"); xen_unregister_device_domain_owner(psdev->dev); - /* Clean-up the device */ + /* Call the reset function which does not take lock as this + * is called from "unbind" which takes a device_lock mutex. + */ + __pci_reset_function_locked(psdev->dev); + if (pci_load_and_free_saved_state(psdev->dev, + &dev_data->pci_saved_state)) { + dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n"); + } else + pci_restore_state(psdev->dev); + + /* Disable the device */ xen_pcibk_reset_device(psdev->dev); + + kfree(dev_data); + pci_set_drvdata(psdev->dev, NULL); + + /* Clean-up the device */ xen_pcibk_config_free_dyn_fields(psdev->dev); xen_pcibk_config_free_dev(psdev->dev); - kfree(pci_get_drvdata(psdev->dev)); - pci_set_drvdata(psdev->dev, NULL); psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; pci_dev_put(psdev->dev); @@ -231,7 +246,17 @@ void pcistub_put_pci_dev(struct pci_dev *dev) /* Cleanup our device * (so it's ready for the next domain) */ + + /* This is OK - we are running from workqueue context + * and want to inhibit the user from fiddling with 'reset' + */ + pci_reset_function(dev); + pci_restore_state(psdev->dev); + + /* This disables the device. */ xen_pcibk_reset_device(found_psdev->dev); + + /* And cleanup up our emulated fields. */ xen_pcibk_config_free_dyn_fields(found_psdev->dev); xen_pcibk_config_reset_dev(found_psdev->dev); @@ -328,6 +353,16 @@ static int __devinit pcistub_init_device(struct pci_dev *dev) if (err) goto config_release; + dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n"); + __pci_reset_function_locked(dev); + + /* We need the device active to save the state. */ + dev_dbg(&dev->dev, "save state of device\n"); + pci_save_state(dev); + dev_data->pci_saved_state = pci_store_saved_state(dev); + if (!dev_data->pci_saved_state) + dev_err(&dev->dev, "Could not store PCI conf saved state!\n"); + /* Now disable the device (this also ensures some private device * data is setup before we export) */ diff --git a/drivers/xen/xen-pciback/pciback.h b/drivers/xen/xen-pciback/pciback.h index e9b4011c5f9a..a7def010eba3 100644 --- a/drivers/xen/xen-pciback/pciback.h +++ b/drivers/xen/xen-pciback/pciback.h @@ -41,6 +41,7 @@ struct xen_pcibk_device { struct xen_pcibk_dev_data { struct list_head config_fields; + struct pci_saved_state *pci_saved_state; unsigned int permissive:1; unsigned int warned_on_write:1; unsigned int enable_intx:1; -- cgit v1.2.3-58-ga151 From 0dea210b1769f191d6b2bc3cc86e51481837ec5e Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 26 Jan 2012 23:45:47 +0900 Subject: PCI: Fix typo in setup-res.c Correct spelling "resouce" to "resource" in dricers/pci/setup-res.c Signed-off-by: Masanari Iida Signed-off-by: Jesse Barnes --- drivers/pci/setup-res.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 85c8470c35e2..6923a9bce49e 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -250,7 +250,7 @@ int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsiz int ret; if (!res->parent) { - dev_info(&dev->dev, "BAR %d: can't reassign an unassigned resouce %pR " + dev_info(&dev->dev, "BAR %d: can't reassign an unassigned resource %pR " "\n", resno, res); return -EINVAL; } -- cgit v1.2.3-58-ga151 From a4ac9fea016fc5c09227eb479bd35e34978323a4 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:17 -0800 Subject: PCI : Calculate right add_size During debug of one SRIOV enabled hotplug device, we found found that add_size is not passed properly. The device has devices under two level bridges: +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0 Oracle Corporation Device | | \-03.0-[a3]--+-00.0 Oracle Corporation Device Which means later the parent bridge will not try to add a big enough range: [ 557.455077] pci 0000:a0:00.0: BAR 14: assigned [mem 0xf9000000-0xf93fffff] [ 557.461974] pci 0000:a0:00.0: BAR 15: assigned [mem 0xf6000000-0xf61fffff pref] [ 557.469340] pci 0000:a1:02.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff] [ 557.476231] pci 0000:a1:02.0: BAR 15: assigned [mem 0xf6000000-0xf60fffff pref] [ 557.483582] pci 0000:a1:03.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 557.490468] pci 0000:a1:03.0: BAR 15: assigned [mem 0xf6100000-0xf61fffff pref] [ 557.497833] pci 0000:a1:03.0: BAR 14: can't assign mem (size 0x200000) [ 557.504378] pci 0000:a1:03.0: failed to add optional resources res=[mem 0xf9200000-0xf93fffff] [ 557.513026] pci 0000:a1:02.0: BAR 14: can't assign mem (size 0x200000) [ 557.519578] pci 0000:a1:02.0: failed to add optional resources res=[mem 0xf9000000-0xf91fffff] It turns out we did not calculate size1 properly. static resource_size_t calculate_memsize(resource_size_t size, resource_size_t min_size, resource_size_t size1, resource_size_t old_size, resource_size_t align) { if (size < min_size) size = min_size; if (old_size == 1 ) old_size = 0; if (size < old_size) size = old_size; size = ALIGN(size + size1, align); return size; } We should not pass add_size with min_size in calculate_memsize since that will make add_size not contribute final add_size. So just pass add_size with size1 to calculate_memsize(). With this change, we should have chance to remove extra addon in pci_reassign_resource. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 4 ++-- drivers/pci/setup-res.c | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 86b69f85f900..9d932f4e4f98 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -612,7 +612,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size, if (children_add_size > add_size) add_size = children_add_size; size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 : - calculate_iosize(size, min_size+add_size, size1, + calculate_iosize(size, min_size, add_size + size1, resource_size(b_res), 4096); if (!size0 && !size1) { if (b_res->start || b_res->end) @@ -726,7 +726,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, if (children_add_size > add_size) add_size = children_add_size; size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 : - calculate_memsize(size, min_size+add_size, 0, + calculate_memsize(size, min_size, add_size, resource_size(b_res), min_align); if (!size0 && !size1) { if (b_res->start || b_res->end) diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 6923a9bce49e..241de6c2b9cd 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -255,11 +255,12 @@ int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsiz return -EINVAL; } - new_size = resource_size(res) + addsize + min_align; + /* already aligned with min_align */ + new_size = resource_size(res) + addsize; ret = _pci_assign_resource(dev, resno, new_size, min_align); if (!ret) { res->flags &= ~IORESOURCE_STARTALIGN; - dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res); + dev_info(&dev->dev, "BAR %d: reassigned %pR\n", resno, res); if (resno < PCI_BRIDGE_RESOURCES) pci_update_resource(dev, resno); } -- cgit v1.2.3-58-ga151 From ef62dfefa93bc90f1cb0f4a55c2d86b3269b3f92 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:18 -0800 Subject: PCI: Make add_to_list() return status Will be used for resource_list_x duplication when trying requested+optional at first. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 9d932f4e4f98..0282fde43951 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -64,7 +64,7 @@ void pci_realloc(void) * @add_size: additional size to be optionally added * to the resource */ -static void add_to_list(struct resource_list_x *head, +static int add_to_list(struct resource_list_x *head, struct pci_dev *dev, struct resource *res, resource_size_t add_size, resource_size_t min_align) { @@ -75,7 +75,7 @@ static void add_to_list(struct resource_list_x *head, tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); if (!tmp) { pr_warning("add_to_list: kmalloc() failed!\n"); - return; + return -ENOMEM; } tmp->next = ln; @@ -87,6 +87,8 @@ static void add_to_list(struct resource_list_x *head, tmp->add_size = add_size; tmp->min_align = min_align; list->next = tmp; + + return 0; } static void add_to_failed_list(struct resource_list_x *head, -- cgit v1.2.3-58-ga151 From 1c372353e9c681b127f21030f8a0f0c2afd82429 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:19 -0800 Subject: PCI: Move get_res_add_size() function Need to call it from __assign_resources_sorted() later and we'd like to avoid a forward declaraion. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 0282fde43951..75d43eb37842 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -99,6 +99,21 @@ static void add_to_failed_list(struct resource_list_x *head, 0 /* dont care */); } +static resource_size_t get_res_add_size(struct resource_list_x *realloc_head, + struct resource *res) +{ + struct resource_list_x *list; + + /* check if it is in realloc_head list */ + for (list = realloc_head->next; list && list->res != res; + list = list->next) + ; + if (list) + return list->add_size; + + return 0; +} + static void __dev_sort_resources(struct pci_dev *dev, struct resource_list *head) { @@ -550,20 +565,6 @@ static resource_size_t calculate_memsize(resource_size_t size, return size; } -static resource_size_t get_res_add_size(struct resource_list_x *realloc_head, - struct resource *res) -{ - struct resource_list_x *list; - - /* check if it is in realloc_head list */ - for (list = realloc_head->next; list && list->res != res; - list = list->next); - if (list) - return list->add_size; - - return 0; -} - /** * pbus_size_io() - size the io window of a given bus * -- cgit v1.2.3-58-ga151 From 3e6e0d80941773a6d0ac94354b083b74967f06fb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:20 -0800 Subject: PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 82 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 75d43eb37842..7757c0026907 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -99,6 +99,24 @@ static void add_to_failed_list(struct resource_list_x *head, 0 /* dont care */); } +static void remove_from_list(struct resource_list_x *realloc_head, + struct resource *res) +{ + struct resource_list_x *prev, *tmp, *list; + + prev = realloc_head; + for (list = realloc_head->next; list;) { + if (list->res != res) { + prev = list; + list = list->next; + continue; + } + tmp = list; + prev->next = list = list->next; + kfree(tmp); + } +} + static resource_size_t get_res_add_size(struct resource_list_x *realloc_head, struct resource *res) { @@ -108,8 +126,13 @@ static resource_size_t get_res_add_size(struct resource_list_x *realloc_head, for (list = realloc_head->next; list && list->res != res; list = list->next) ; - if (list) + + if (list) { + dev_printk(KERN_DEBUG, &list->dev->dev, + "%pR get_res_add_size add_size %llx\n", + list->res, (unsigned long long)list->add_size); return list->add_size; + } return 0; } @@ -238,6 +261,64 @@ static void __assign_resources_sorted(struct resource_list *head, struct resource_list_x *realloc_head, struct resource_list_x *fail_head) { + /* + * Should not assign requested resources at first. + * they could be adjacent, so later reassign can not reallocate + * them one by one in parent resource window. + * Try to assign requested + add_size at begining + * if could do that, could get out early. + * if could not do that, we still try to assign requested at first, + * then try to reassign add_size for some resources. + */ + struct resource_list_x save_head, local_fail_head, *list; + struct resource_list *l; + + /* Check if optional add_size is there */ + if (!realloc_head || !realloc_head->next) + goto requested_and_reassign; + + /* Save original start, end, flags etc at first */ + save_head.next = NULL; + for (l = head->next; l; l = l->next) + if (add_to_list(&save_head, l->dev, l->res, 0, 0)) { + free_list(resource_list_x, &save_head); + goto requested_and_reassign; + } + + /* Update res in head list with add_size in realloc_head list */ + for (l = head->next; l; l = l->next) + l->res->end += get_res_add_size(realloc_head, l->res); + + /* Try updated head list with add_size added */ + local_fail_head.next = NULL; + assign_requested_resources_sorted(head, &local_fail_head); + + /* all assigned with add_size ? */ + if (!local_fail_head.next) { + /* Remove head list from realloc_head list */ + for (l = head->next; l; l = l->next) + remove_from_list(realloc_head, l->res); + free_list(resource_list_x, &save_head); + free_list(resource_list, head); + return; + } + + free_list(resource_list_x, &local_fail_head); + /* Release assigned resource */ + for (l = head->next; l; l = l->next) + if (l->res->parent) + release_resource(l->res); + /* Restore start/end/flags from saved list */ + for (list = save_head.next; list; list = list->next) { + struct resource *res = list->res; + + res->start = list->start; + res->end = list->end; + res->flags = list->flags; + } + free_list(resource_list_x, &save_head); + +requested_and_reassign: /* Satisfy the must-have resource requests */ assign_requested_resources_sorted(head, fail_head); -- cgit v1.2.3-58-ga151 From 8424d7592eab8245b51051ee458e598213bca3b2 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:21 -0800 Subject: PCI: Use add_list in pcie hotplug path. We need add size for hot plug path when pluging in hotplug chassis without cards. -v2: change descriptions. make it applicable after "pci: Check bridge resources after resource allocation." Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 7757c0026907..97c1eda96e64 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -330,13 +330,14 @@ requested_and_reassign: } static void pdev_assign_resources_sorted(struct pci_dev *dev, + struct resource_list_x *add_head, struct resource_list_x *fail_head) { struct resource_list head; head.next = NULL; __dev_sort_resources(dev, &head); - __assign_resources_sorted(&head, NULL, fail_head); + __assign_resources_sorted(&head, add_head, fail_head); } @@ -1006,17 +1007,19 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus) EXPORT_SYMBOL(pci_bus_assign_resources); static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge, + struct resource_list_x *add_head, struct resource_list_x *fail_head) { struct pci_bus *b; - pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head); + pdev_assign_resources_sorted((struct pci_dev *)bridge, + add_head, fail_head); b = bridge->subordinate; if (!b) return; - __pci_bus_assign_resources(b, NULL, fail_head); + __pci_bus_assign_resources(b, add_head, fail_head); switch (bridge->class >> 8) { case PCI_CLASS_BRIDGE_PCI: @@ -1291,6 +1294,8 @@ enable_and_dump: void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; + struct resource_list_x add_list; /* list of resources that + want additional resources */ int tried_times = 0; struct resource_list_x head, *list; int retval; @@ -1298,11 +1303,12 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) IORESOURCE_PREFETCH; head.next = NULL; + add_list.next = NULL; again: - pci_bus_size_bridges(parent); - __pci_bridge_assign_resources(bridge, &head); - + __pci_bus_size_bridges(parent, &add_list); + __pci_bridge_assign_resources(bridge, &add_list, &head); + BUG_ON(add_list.next); tried_times++; if (!head.next) -- cgit v1.2.3-58-ga151 From 2f320521a0d2d11fb857be09d05e2fbbf3ef8c13 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:22 -0800 Subject: PCI: Make rescan bus increase bridge resource size if needed Current rescan will not touch bridge MMIO and IO. Try to reuse pci_assign_unassigned_bridge_resources(bridge) to update bridge resources, if child devices need more resources. Only do that for bridges whose children are all removed already; i.e. don't release resources that could already be in use by drivers on child devices. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 5 ++++- drivers/pci/probe.c | 25 +++++++++++++++++++++++++ include/linux/pci.h | 1 + 3 files changed, 30 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index a3cd8cad532a..d9723039e99a 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -366,7 +366,10 @@ dev_bus_rescan_store(struct device *dev, struct device_attribute *attr, if (val) { mutex_lock(&pci_remove_rescan_mutex); - pci_rescan_bus(bus); + if (!pci_is_root_bus(bus) && list_empty(&bus->devices)) + pci_rescan_bus_bridge_resize(bus->self); + else + pci_rescan_bus(bus); mutex_unlock(&pci_remove_rescan_mutex); } return count; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 71eac9cd724d..0e84e8c2a6d0 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1666,6 +1666,31 @@ struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops, EXPORT_SYMBOL(pci_scan_bus); #ifdef CONFIG_HOTPLUG +/** + * pci_rescan_bus_bridge_resize - scan a PCI bus for devices. + * @bridge: PCI bridge for the bus to scan + * + * Scan a PCI bus and child buses for new devices, add them, + * and enable them, resizing bridge mmio/io resource if necessary + * and possible. The caller must ensure the child devices are already + * removed for resizing to occur. + * + * Returns the max number of subordinate bus discovered. + */ +unsigned int __ref pci_rescan_bus_bridge_resize(struct pci_dev *bridge) +{ + unsigned int max; + struct pci_bus *bus = bridge->subordinate; + + max = pci_scan_child_bus(bus); + + pci_assign_unassigned_bridge_resources(bridge); + + pci_bus_add_devices(bus); + + return max; +} + /** * pci_rescan_bus - scan a PCI bus for devices. * @bus: PCI bus to scan diff --git a/include/linux/pci.h b/include/linux/pci.h index f44276049f4a..87507aadf9a2 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -882,6 +882,7 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG +unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge); unsigned int pci_rescan_bus(struct pci_bus *bus); #endif -- cgit v1.2.3-58-ga151 From 9b03088f955552299f50a1f660372698b07ab339 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:23 -0800 Subject: PCI: Make pci_rescan_bus handle add_list This allows us to allocate resources to hotplug bridges during remove/rescan. We need to move the function to setup-bus.c so it can use __pci_bus_size_bridges and __pci_bus_assign_resources directly to take the add_list resource tracking list. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 32 -------------------------------- drivers/pci/setup-bus.c | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 0e84e8c2a6d0..aad7d0ff6b08 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1691,38 +1691,6 @@ unsigned int __ref pci_rescan_bus_bridge_resize(struct pci_dev *bridge) return max; } -/** - * pci_rescan_bus - scan a PCI bus for devices. - * @bus: PCI bus to scan - * - * Scan a PCI bus and child buses for new devices, adds them, - * and enables them. - * - * Returns the max number of subordinate bus discovered. - */ -unsigned int __ref pci_rescan_bus(struct pci_bus *bus) -{ - unsigned int max; - struct pci_dev *dev; - - max = pci_scan_child_bus(bus); - - down_read(&pci_bus_sem); - list_for_each_entry(dev, &bus->devices, bus_list) - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || - dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) - if (dev->subordinate) - pci_bus_size_bridges(dev->subordinate); - up_read(&pci_bus_sem); - - pci_bus_assign_resources(bus); - pci_enable_bridges(bus); - pci_bus_add_devices(bus); - - return max; -} -EXPORT_SYMBOL_GPL(pci_rescan_bus); - EXPORT_SYMBOL(pci_add_new_bus); EXPORT_SYMBOL(pci_scan_slot); EXPORT_SYMBOL(pci_scan_bridge); diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 97c1eda96e64..c09c67ab5612 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1357,3 +1357,42 @@ enable_all: pci_enable_bridges(parent); } EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources); + +#ifdef CONFIG_HOTPLUG +/** + * pci_rescan_bus - scan a PCI bus for devices. + * @bus: PCI bus to scan + * + * Scan a PCI bus and child buses for new devices, adds them, + * and enables them. + * + * Returns the max number of subordinate bus discovered. + */ +unsigned int __ref pci_rescan_bus(struct pci_bus *bus) +{ + unsigned int max; + struct pci_dev *dev; + struct resource_list_x add_list; /* list of resources that + want additional resources */ + + max = pci_scan_child_bus(bus); + + add_list.next = NULL; + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || + dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) + if (dev->subordinate) + __pci_bus_size_bridges(dev->subordinate, + &add_list); + up_read(&pci_bus_sem); + __pci_bus_assign_resources(bus, &add_list, NULL); + BUG_ON(add_list.next); + + pci_enable_bridges(bus); + pci_bus_add_devices(bus); + + return max; +} +EXPORT_SYMBOL_GPL(pci_rescan_bus); +#endif -- cgit v1.2.3-58-ga151 From 19aa7ee432cec00b647443719eb5c055b69a5e8e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:24 -0800 Subject: PCI: make re-allocation try harder by reassigning ranges higher in the heirarchy On a system with devices that support SRIOV connected to a pcie switch to pcie root port: +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0 Oracle Corporation Device 207a | | \-03.0-[a3]--+-00.0 Oracle Corporation Device 207a | +-02.2-[b0-bf]----00.0-[b1-b3]--+-02.0-[b2]--+-00.0 Oracle Corporation Device 207a | | \-03.0-[b3]--+-00.0 Oracle Corporation Device 207a When the BIOS does not assign resources for SRIOV BARs, kernel pci reallocation only goes up one bridge and then gives up, failing to to get resources for all sSRIOV BARs, even though the range is large enough in the peer root bus. Specifically, only the bridge at the a1:02.0 level has its resources cleared and reallocated. The kernel does not go up to clear the bridge at the 80:02.0 level. To make it go to upper levels, during retry, we need to treat "good to have" resources as "must have". Only on the last try will we treat good to have resources as optional. At that time, parent bridge resources will already have been released so we'll have a chance to get everything assigned with must_have plus good_to_have for all child devices. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 46 ++++++++++++++++++++++++++++------------------ 1 file changed, 28 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index c09c67ab5612..c79ce4ee634b 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -943,7 +943,8 @@ void __ref __pci_bus_size_bridges(struct pci_bus *bus, * Follow thru */ default: - pbus_size_io(bus, 0, additional_io_size, realloc_head); + pbus_size_io(bus, realloc_head ? 0 : additional_io_size, + additional_io_size, realloc_head); /* If the bridge supports prefetchable range, size it separately. If it doesn't, or its prefetchable window has already been allocated by arch code, try @@ -951,11 +952,15 @@ void __ref __pci_bus_size_bridges(struct pci_bus *bus, resources. */ mask = IORESOURCE_MEM; prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH; - if (pbus_size_mem(bus, prefmask, prefmask, 0, additional_mem_size, realloc_head)) + if (pbus_size_mem(bus, prefmask, prefmask, + realloc_head ? 0 : additional_mem_size, + additional_mem_size, realloc_head)) mask = prefmask; /* Success, size non-prefetch only. */ else additional_mem_size += additional_mem_size; - pbus_size_mem(bus, mask, IORESOURCE_MEM, 0, additional_mem_size, realloc_head); + pbus_size_mem(bus, mask, IORESOURCE_MEM, + realloc_head ? 0 : additional_mem_size, + additional_mem_size, realloc_head); break; } } @@ -1194,45 +1199,50 @@ pci_assign_unassigned_resources(void) struct pci_bus *bus; struct resource_list_x realloc_list; /* list of resources that want additional resources */ + struct resource_list_x *add_list = NULL; int tried_times = 0; enum release_type rel_type = leaf_only; struct resource_list_x head, *list; unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; unsigned long failed_type; - int max_depth = pci_get_max_depth(); - int pci_try_num; - + int pci_try_num = 1; head.next = NULL; realloc_list.next = NULL; - pci_try_num = max_depth + 1; - printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n", - max_depth, pci_try_num); + /* don't realloc if asked to do so */ + if (pci_realloc_enabled()) { + int max_depth = pci_get_max_depth(); + + pci_try_num = max_depth + 1; + printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n", + max_depth, pci_try_num); + } again: + /* + * last try will use add_list, otherwise will try good to have as + * must have, so can realloc parent bridge resource + */ + if (tried_times + 1 == pci_try_num) + add_list = &realloc_list; /* Depth first, calculate sizes and alignments of all subordinate buses. */ list_for_each_entry(bus, &pci_root_buses, node) - __pci_bus_size_bridges(bus, &realloc_list); + __pci_bus_size_bridges(bus, add_list); /* Depth last, allocate resources and update the hardware. */ list_for_each_entry(bus, &pci_root_buses, node) - __pci_bus_assign_resources(bus, &realloc_list, &head); - BUG_ON(realloc_list.next); + __pci_bus_assign_resources(bus, add_list, &head); + if (add_list) + BUG_ON(add_list->next); tried_times++; /* any device complain? */ if (!head.next) goto enable_and_dump; - /* don't realloc if asked to do so */ - if (!pci_realloc_enabled()) { - free_list(resource_list_x, &head); - goto enable_and_dump; - } - failed_type = 0; for (list = head.next; list;) { failed_type |= list->flags; -- cgit v1.2.3-58-ga151 From 78c3b329b9dd7097781cb900146e503e499cccfe Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:25 -0800 Subject: PCI: Move pdev_sort_resources() to setup-bus.c This allows us to move the definition of struct resource_list to setup_bus.c and later convert resource_list to a regular list. Suggested-by: Linus Torvalds Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/setup-res.c | 47 ----------------------------------------------- include/linux/pci.h | 1 - 3 files changed, 46 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index c79ce4ee634b..f233d127ca89 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -137,6 +137,52 @@ static resource_size_t get_res_add_size(struct resource_list_x *realloc_head, return 0; } +/* Sort resources by alignment */ +static void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) +{ + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *r; + struct resource_list *list, *tmp; + resource_size_t r_align; + + r = &dev->resource[i]; + + if (r->flags & IORESOURCE_PCI_FIXED) + continue; + + if (!(r->flags) || r->parent) + continue; + + r_align = pci_resource_alignment(dev, r); + if (!r_align) { + dev_warn(&dev->dev, "BAR %d: %pR has bogus alignment\n", + i, r); + continue; + } + for (list = head; ; list = list->next) { + resource_size_t align = 0; + struct resource_list *ln = list->next; + + if (ln) + align = pci_resource_alignment(ln->dev, ln->res); + + if (r_align > align) { + tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + panic("pdev_sort_resources(): " + "kmalloc() failed!\n"); + tmp->next = ln; + tmp->res = r; + tmp->dev = dev; + list->next = tmp; + break; + } + } + } +} + static void __dev_sort_resources(struct pci_dev *dev, struct resource_list *head) { diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 241de6c2b9cd..f968185aa192 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -302,53 +302,6 @@ int pci_assign_resource(struct pci_dev *dev, int resno) return ret; } - -/* Sort resources by alignment */ -void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) -{ - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource *r; - struct resource_list *list, *tmp; - resource_size_t r_align; - - r = &dev->resource[i]; - - if (r->flags & IORESOURCE_PCI_FIXED) - continue; - - if (!(r->flags) || r->parent) - continue; - - r_align = pci_resource_alignment(dev, r); - if (!r_align) { - dev_warn(&dev->dev, "BAR %d: %pR has bogus alignment\n", - i, r); - continue; - } - for (list = head; ; list = list->next) { - resource_size_t align = 0; - struct resource_list *ln = list->next; - - if (ln) - align = pci_resource_alignment(ln->dev, ln->res); - - if (r_align > align) { - tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); - if (!tmp) - panic("pdev_sort_resources(): " - "kmalloc() failed!\n"); - tmp->next = ln; - tmp->res = r; - tmp->dev = dev; - list->next = tmp; - break; - } - } - } -} - int pci_enable_resources(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/include/linux/pci.h b/include/linux/pci.h index 87507aadf9a2..f8caaab4b3fc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -899,7 +899,6 @@ int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge); void pdev_enable_device(struct pci_dev *); -void pdev_sort_resources(struct pci_dev *, struct resource_list *); int pci_enable_resources(struct pci_dev *, int mask); void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), int (*)(const struct pci_dev *, u8, u8)); -- cgit v1.2.3-58-ga151 From 2934a0de095f277a7bbc15a72ecf61af31a45163 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:26 -0800 Subject: PCI: Move struct resource_list to setup-bus.c No user outside of setup-bus.c now. Later patches will convert resource_list to a regular list. Suggested-by: Linus Torvalds Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 6 ++++++ include/linux/ioport.h | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index f233d127ca89..b067a4cdce43 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -27,6 +27,12 @@ #include #include "pci.h" +struct resource_list { + struct resource_list *next; + struct resource *res; + struct pci_dev *dev; +}; + struct resource_list_x { struct resource_list_x *next; struct resource *res; diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 9d57a71775b5..e885ba23de70 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -23,12 +23,6 @@ struct resource { struct resource *parent, *sibling, *child; }; -struct resource_list { - struct resource_list *next; - struct resource *res; - struct pci_dev *dev; -}; - /* * IO resources have these defined flags. */ -- cgit v1.2.3-58-ga151 From bdc4abecaeff30b3cc230b418a925999dda594c2 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:27 -0800 Subject: PCI: Replace resource_list with generic list So we can use helper functions for generic list. This makes the resource re-allocation code much more readable. -v2: Use list_add_tail instead of adding list_insert_before, Pointed out by Linus. Suggested-by: Linus Torvalds Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 374 +++++++++++++++++++++++------------------------- 1 file changed, 182 insertions(+), 192 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index b067a4cdce43..4c5509e3c75a 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -27,14 +27,14 @@ #include #include "pci.h" -struct resource_list { - struct resource_list *next; +struct pci_dev_resource { + struct list_head list; struct resource *res; struct pci_dev *dev; }; -struct resource_list_x { - struct resource_list_x *next; +struct pci_dev_resource_x { + struct list_head list; struct resource *res; struct pci_dev *dev; resource_size_t start; @@ -44,14 +44,12 @@ struct resource_list_x { unsigned long flags; }; -#define free_list(type, head) do { \ - struct type *list, *tmp; \ - for (list = (head)->next; list;) { \ - tmp = list; \ - list = list->next; \ - kfree(tmp); \ - } \ - (head)->next = NULL; \ +#define free_list(type, head) do { \ + struct type *dev_res, *tmp; \ + list_for_each_entry_safe(dev_res, tmp, head, list) { \ + list_del(&dev_res->list); \ + kfree(dev_res); \ + } \ } while (0) int pci_realloc_enable = 0; @@ -70,21 +68,18 @@ void pci_realloc(void) * @add_size: additional size to be optionally added * to the resource */ -static int add_to_list(struct resource_list_x *head, +static int add_to_list(struct list_head *head, struct pci_dev *dev, struct resource *res, resource_size_t add_size, resource_size_t min_align) { - struct resource_list_x *list = head; - struct resource_list_x *ln = list->next; - struct resource_list_x *tmp; + struct pci_dev_resource_x *tmp; - tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); + tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); if (!tmp) { pr_warning("add_to_list: kmalloc() failed!\n"); return -ENOMEM; } - tmp->next = ln; tmp->res = res; tmp->dev = dev; tmp->start = res->start; @@ -92,12 +87,13 @@ static int add_to_list(struct resource_list_x *head, tmp->flags = res->flags; tmp->add_size = add_size; tmp->min_align = min_align; - list->next = tmp; + + list_add(&tmp->list, head); return 0; } -static void add_to_failed_list(struct resource_list_x *head, +static void add_to_failed_list(struct list_head *head, struct pci_dev *dev, struct resource *res) { add_to_list(head, dev, res, @@ -105,53 +101,48 @@ static void add_to_failed_list(struct resource_list_x *head, 0 /* dont care */); } -static void remove_from_list(struct resource_list_x *realloc_head, +static void remove_from_list(struct list_head *realloc_head, struct resource *res) { - struct resource_list_x *prev, *tmp, *list; + struct pci_dev_resource_x *dev_res_x, *tmp; - prev = realloc_head; - for (list = realloc_head->next; list;) { - if (list->res != res) { - prev = list; - list = list->next; - continue; + list_for_each_entry_safe(dev_res_x, tmp, realloc_head, list) { + if (dev_res_x->res == res) { + list_del(&dev_res_x->list); + kfree(dev_res_x); + break; } - tmp = list; - prev->next = list = list->next; - kfree(tmp); } } -static resource_size_t get_res_add_size(struct resource_list_x *realloc_head, +static resource_size_t get_res_add_size(struct list_head *realloc_head, struct resource *res) { - struct resource_list_x *list; - - /* check if it is in realloc_head list */ - for (list = realloc_head->next; list && list->res != res; - list = list->next) - ; - - if (list) { - dev_printk(KERN_DEBUG, &list->dev->dev, - "%pR get_res_add_size add_size %llx\n", - list->res, (unsigned long long)list->add_size); - return list->add_size; + struct pci_dev_resource_x *dev_res_x; + + list_for_each_entry(dev_res_x, realloc_head, list) { + if (dev_res_x->res == res) { + dev_printk(KERN_DEBUG, &dev_res_x->dev->dev, + "%pR get_res_add_size add_size %llx\n", + dev_res_x->res, + (unsigned long long)dev_res_x->add_size); + return dev_res_x->add_size; + } } return 0; } /* Sort resources by alignment */ -static void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) +static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head) { int i; for (i = 0; i < PCI_NUM_RESOURCES; i++) { struct resource *r; - struct resource_list *list, *tmp; + struct pci_dev_resource *dev_res, *tmp; resource_size_t r_align; + struct list_head *n; r = &dev->resource[i]; @@ -167,30 +158,34 @@ static void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) i, r); continue; } - for (list = head; ; list = list->next) { - resource_size_t align = 0; - struct resource_list *ln = list->next; - if (ln) - align = pci_resource_alignment(ln->dev, ln->res); + tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + panic("pdev_sort_resources(): " + "kmalloc() failed!\n"); + tmp->res = r; + tmp->dev = dev; + + /* fallback is smallest one or list is empty*/ + n = head; + list_for_each_entry(dev_res, head, list) { + resource_size_t align; + + align = pci_resource_alignment(dev_res->dev, + dev_res->res); if (r_align > align) { - tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); - if (!tmp) - panic("pdev_sort_resources(): " - "kmalloc() failed!\n"); - tmp->next = ln; - tmp->res = r; - tmp->dev = dev; - list->next = tmp; + n = &dev_res->list; break; } } + /* Insert it just before n*/ + list_add_tail(&tmp->list, n); } } static void __dev_sort_resources(struct pci_dev *dev, - struct resource_list *head) + struct list_head *head) { u16 class = dev->class >> 8; @@ -228,49 +223,53 @@ static inline void reset_resource(struct resource *res) * additional resources for the element, provided the element * is in the head list. */ -static void reassign_resources_sorted(struct resource_list_x *realloc_head, - struct resource_list *head) +static void reassign_resources_sorted(struct list_head *realloc_head, + struct list_head *head) { struct resource *res; - struct resource_list_x *list, *tmp, *prev; - struct resource_list *hlist; + struct pci_dev_resource_x *dev_res_x, *tmp; + struct pci_dev_resource *dev_res; resource_size_t add_size; int idx; - prev = realloc_head; - for (list = realloc_head->next; list;) { - res = list->res; + list_for_each_entry_safe(dev_res_x, tmp, realloc_head, list) { + bool found_match = false; + + res = dev_res_x->res; /* skip resource that has been reset */ if (!res->flags) goto out; /* skip this resource if not found in head list */ - for (hlist = head->next; hlist && hlist->res != res; - hlist = hlist->next); - if (!hlist) { /* just skip */ - prev = list; - list = list->next; - continue; + list_for_each_entry(dev_res, head, list) { + if (dev_res->res == res) { + found_match = true; + break; + } } + if (!found_match)/* just skip */ + continue; - idx = res - &list->dev->resource[0]; - add_size=list->add_size; + idx = res - &dev_res_x->dev->resource[0]; + add_size = dev_res_x->add_size; if (!resource_size(res)) { - res->start = list->start; + res->start = dev_res_x->start; res->end = res->start + add_size - 1; - if(pci_assign_resource(list->dev, idx)) + if (pci_assign_resource(dev_res_x->dev, idx)) reset_resource(res); } else { - resource_size_t align = list->min_align; - res->flags |= list->flags & (IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN); - if (pci_reassign_resource(list->dev, idx, add_size, align)) - dev_printk(KERN_DEBUG, &list->dev->dev, "failed to add optional resources res=%pR\n", + resource_size_t align = dev_res_x->min_align; + res->flags |= dev_res_x->flags & + (IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN); + if (pci_reassign_resource(dev_res_x->dev, idx, + add_size, align)) + dev_printk(KERN_DEBUG, &dev_res_x->dev->dev, + "failed to add optional resources res=%pR\n", res); } out: - tmp = list; - prev->next = list = list->next; - kfree(tmp); + list_del(&dev_res_x->list); + kfree(dev_res_x); } } @@ -284,34 +283,36 @@ out: * Satisfy resource requests of each element in the list. Add * requests that could not satisfied to the failed_list. */ -static void assign_requested_resources_sorted(struct resource_list *head, - struct resource_list_x *fail_head) +static void assign_requested_resources_sorted(struct list_head *head, + struct list_head *fail_head) { struct resource *res; - struct resource_list *list; + struct pci_dev_resource *dev_res; int idx; - for (list = head->next; list; list = list->next) { - res = list->res; - idx = res - &list->dev->resource[0]; - if (resource_size(res) && pci_assign_resource(list->dev, idx)) { - if (fail_head && !pci_is_root_bus(list->dev->bus)) { + list_for_each_entry(dev_res, head, list) { + res = dev_res->res; + idx = res - &dev_res->dev->resource[0]; + if (resource_size(res) && + pci_assign_resource(dev_res->dev, idx)) { + if (fail_head && !pci_is_root_bus(dev_res->dev->bus)) { /* * if the failed res is for ROM BAR, and it will * be enabled later, don't add it to the list */ if (!((idx == PCI_ROM_RESOURCE) && (!(res->flags & IORESOURCE_ROM_ENABLE)))) - add_to_failed_list(fail_head, list->dev, res); + add_to_failed_list(fail_head, + dev_res->dev, res); } reset_resource(res); } } } -static void __assign_resources_sorted(struct resource_list *head, - struct resource_list_x *realloc_head, - struct resource_list_x *fail_head) +static void __assign_resources_sorted(struct list_head *head, + struct list_head *realloc_head, + struct list_head *fail_head) { /* * Should not assign requested resources at first. @@ -322,53 +323,55 @@ static void __assign_resources_sorted(struct resource_list *head, * if could not do that, we still try to assign requested at first, * then try to reassign add_size for some resources. */ - struct resource_list_x save_head, local_fail_head, *list; - struct resource_list *l; + LIST_HEAD(save_head); + LIST_HEAD(local_fail_head); + struct pci_dev_resource_x *dev_res_x; + struct pci_dev_resource *dev_res; /* Check if optional add_size is there */ - if (!realloc_head || !realloc_head->next) + if (!realloc_head || list_empty(realloc_head)) goto requested_and_reassign; /* Save original start, end, flags etc at first */ - save_head.next = NULL; - for (l = head->next; l; l = l->next) - if (add_to_list(&save_head, l->dev, l->res, 0, 0)) { - free_list(resource_list_x, &save_head); + list_for_each_entry(dev_res, head, list) { + if (add_to_list(&save_head, dev_res->dev, dev_res->res, 0, 0)) { + free_list(pci_dev_resource_x, &save_head); goto requested_and_reassign; } + } /* Update res in head list with add_size in realloc_head list */ - for (l = head->next; l; l = l->next) - l->res->end += get_res_add_size(realloc_head, l->res); + list_for_each_entry(dev_res, head, list) + dev_res->res->end += get_res_add_size(realloc_head, + dev_res->res); /* Try updated head list with add_size added */ - local_fail_head.next = NULL; assign_requested_resources_sorted(head, &local_fail_head); /* all assigned with add_size ? */ - if (!local_fail_head.next) { + if (list_empty(&local_fail_head)) { /* Remove head list from realloc_head list */ - for (l = head->next; l; l = l->next) - remove_from_list(realloc_head, l->res); - free_list(resource_list_x, &save_head); - free_list(resource_list, head); + list_for_each_entry(dev_res, head, list) + remove_from_list(realloc_head, dev_res->res); + free_list(pci_dev_resource_x, &save_head); + free_list(pci_dev_resource, head); return; } - free_list(resource_list_x, &local_fail_head); + free_list(pci_dev_resource_x, &local_fail_head); /* Release assigned resource */ - for (l = head->next; l; l = l->next) - if (l->res->parent) - release_resource(l->res); + list_for_each_entry(dev_res, head, list) + if (dev_res->res->parent) + release_resource(dev_res->res); /* Restore start/end/flags from saved list */ - for (list = save_head.next; list; list = list->next) { - struct resource *res = list->res; + list_for_each_entry(dev_res_x, &save_head, list) { + struct resource *res = dev_res_x->res; - res->start = list->start; - res->end = list->end; - res->flags = list->flags; + res->start = dev_res_x->start; + res->end = dev_res_x->end; + res->flags = dev_res_x->flags; } - free_list(resource_list_x, &save_head); + free_list(pci_dev_resource_x, &save_head); requested_and_reassign: /* Satisfy the must-have resource requests */ @@ -378,29 +381,27 @@ requested_and_reassign: requests */ if (realloc_head) reassign_resources_sorted(realloc_head, head); - free_list(resource_list, head); + free_list(pci_dev_resource, head); } static void pdev_assign_resources_sorted(struct pci_dev *dev, - struct resource_list_x *add_head, - struct resource_list_x *fail_head) + struct list_head *add_head, + struct list_head *fail_head) { - struct resource_list head; + LIST_HEAD(head); - head.next = NULL; __dev_sort_resources(dev, &head); __assign_resources_sorted(&head, add_head, fail_head); } static void pbus_assign_resources_sorted(const struct pci_bus *bus, - struct resource_list_x *realloc_head, - struct resource_list_x *fail_head) + struct list_head *realloc_head, + struct list_head *fail_head) { struct pci_dev *dev; - struct resource_list head; + LIST_HEAD(head); - head.next = NULL; list_for_each_entry(dev, &bus->devices, bus_list) __dev_sort_resources(dev, &head); @@ -713,7 +714,7 @@ static resource_size_t calculate_memsize(resource_size_t size, * We must be careful with the ISA aliasing though. */ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size, - resource_size_t add_size, struct resource_list_x *realloc_head) + resource_size_t add_size, struct list_head *realloc_head) { struct pci_dev *dev; struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO); @@ -781,7 +782,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size, static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type, resource_size_t min_size, resource_size_t add_size, - struct resource_list_x *realloc_head) + struct list_head *realloc_head) { struct pci_dev *dev; resource_size_t min_align, align, size, size0, size1; @@ -891,7 +892,7 @@ unsigned long pci_cardbus_resource_alignment(struct resource *res) } static void pci_bus_size_cardbus(struct pci_bus *bus, - struct resource_list_x *realloc_head) + struct list_head *realloc_head) { struct pci_dev *bridge = bus->self; struct resource *b_res = &bridge->resource[PCI_BRIDGE_RESOURCES]; @@ -953,7 +954,7 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, } void __ref __pci_bus_size_bridges(struct pci_bus *bus, - struct resource_list_x *realloc_head) + struct list_head *realloc_head) { struct pci_dev *dev; unsigned long mask, prefmask; @@ -1024,8 +1025,8 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus) EXPORT_SYMBOL(pci_bus_size_bridges); static void __ref __pci_bus_assign_resources(const struct pci_bus *bus, - struct resource_list_x *realloc_head, - struct resource_list_x *fail_head) + struct list_head *realloc_head, + struct list_head *fail_head) { struct pci_bus *b; struct pci_dev *dev; @@ -1064,8 +1065,8 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus) EXPORT_SYMBOL(pci_bus_assign_resources); static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge, - struct resource_list_x *add_head, - struct resource_list_x *fail_head) + struct list_head *add_head, + struct list_head *fail_head) { struct pci_bus *b; @@ -1249,20 +1250,18 @@ void __init pci_assign_unassigned_resources(void) { struct pci_bus *bus; - struct resource_list_x realloc_list; /* list of resources that + LIST_HEAD(realloc_head); /* list of resources that want additional resources */ - struct resource_list_x *add_list = NULL; + struct list_head *add_list = NULL; int tried_times = 0; enum release_type rel_type = leaf_only; - struct resource_list_x head, *list; + LIST_HEAD(fail_head); + struct pci_dev_resource_x *dev_res_x; unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; unsigned long failed_type; int pci_try_num = 1; - head.next = NULL; - realloc_list.next = NULL; - /* don't realloc if asked to do so */ if (pci_realloc_enabled()) { int max_depth = pci_get_max_depth(); @@ -1278,7 +1277,7 @@ again: * must have, so can realloc parent bridge resource */ if (tried_times + 1 == pci_try_num) - add_list = &realloc_list; + add_list = &realloc_head; /* Depth first, calculate sizes and alignments of all subordinate buses. */ list_for_each_entry(bus, &pci_root_buses, node) @@ -1286,27 +1285,26 @@ again: /* Depth last, allocate resources and update the hardware. */ list_for_each_entry(bus, &pci_root_buses, node) - __pci_bus_assign_resources(bus, add_list, &head); + __pci_bus_assign_resources(bus, add_list, &fail_head); if (add_list) - BUG_ON(add_list->next); + BUG_ON(!list_empty(add_list)); tried_times++; /* any device complain? */ - if (!head.next) + if (list_empty(&fail_head)) goto enable_and_dump; failed_type = 0; - for (list = head.next; list;) { - failed_type |= list->flags; - list = list->next; - } + list_for_each_entry(dev_res_x, &fail_head, list) + failed_type |= dev_res_x->flags; + /* * io port are tight, don't try extra * or if reach the limit, don't want to try more */ failed_type &= type_mask; if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) { - free_list(resource_list_x, &head); + free_list(pci_dev_resource_x, &fail_head); goto enable_and_dump; } @@ -1321,25 +1319,23 @@ again: * Try to release leaf bridge's resources that doesn't fit resource of * child device under that bridge */ - for (list = head.next; list;) { - bus = list->dev->bus; - pci_bus_release_bridge_resources(bus, list->flags & type_mask, - rel_type); - list = list->next; + list_for_each_entry(dev_res_x, &fail_head, list) { + bus = dev_res_x->dev->bus; + pci_bus_release_bridge_resources(bus, + dev_res_x->flags & type_mask, + rel_type); } /* restore size and flags */ - for (list = head.next; list;) { - struct resource *res = list->res; + list_for_each_entry(dev_res_x, &fail_head, list) { + struct resource *res = dev_res_x->res; - res->start = list->start; - res->end = list->end; - res->flags = list->flags; - if (list->dev->subordinate) + res->start = dev_res_x->start; + res->end = dev_res_x->end; + res->flags = dev_res_x->flags; + if (dev_res_x->dev->subordinate) res->flags = 0; - - list = list->next; } - free_list(resource_list_x, &head); + free_list(pci_dev_resource_x, &fail_head); goto again; @@ -1356,29 +1352,27 @@ enable_and_dump: void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; - struct resource_list_x add_list; /* list of resources that + LIST_HEAD(add_list); /* list of resources that want additional resources */ int tried_times = 0; - struct resource_list_x head, *list; + LIST_HEAD(fail_head); + struct pci_dev_resource_x *dev_res_x; int retval; unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; - head.next = NULL; - add_list.next = NULL; - again: __pci_bus_size_bridges(parent, &add_list); - __pci_bridge_assign_resources(bridge, &add_list, &head); - BUG_ON(add_list.next); + __pci_bridge_assign_resources(bridge, &add_list, &fail_head); + BUG_ON(!list_empty(&add_list)); tried_times++; - if (!head.next) + if (list_empty(&fail_head)) goto enable_all; if (tried_times >= 2) { /* still fail, don't need to try more */ - free_list(resource_list_x, &head); + free_list(pci_dev_resource_x, &fail_head); goto enable_all; } @@ -1389,27 +1383,24 @@ again: * Try to release leaf bridge's resources that doesn't fit resource of * child device under that bridge */ - for (list = head.next; list;) { - struct pci_bus *bus = list->dev->bus; - unsigned long flags = list->flags; + list_for_each_entry(dev_res_x, &fail_head, list) { + struct pci_bus *bus = dev_res_x->dev->bus; + unsigned long flags = dev_res_x->flags; pci_bus_release_bridge_resources(bus, flags & type_mask, whole_subtree); - list = list->next; } /* restore size and flags */ - for (list = head.next; list;) { - struct resource *res = list->res; + list_for_each_entry(dev_res_x, &fail_head, list) { + struct resource *res = dev_res_x->res; - res->start = list->start; - res->end = list->end; - res->flags = list->flags; - if (list->dev->subordinate) + res->start = dev_res_x->start; + res->end = dev_res_x->end; + res->flags = dev_res_x->flags; + if (dev_res_x->dev->subordinate) res->flags = 0; - - list = list->next; } - free_list(resource_list_x, &head); + free_list(pci_dev_resource_x, &fail_head); goto again; @@ -1434,12 +1425,11 @@ unsigned int __ref pci_rescan_bus(struct pci_bus *bus) { unsigned int max; struct pci_dev *dev; - struct resource_list_x add_list; /* list of resources that + LIST_HEAD(add_list); /* list of resources that want additional resources */ max = pci_scan_child_bus(bus); - add_list.next = NULL; down_read(&pci_bus_sem); list_for_each_entry(dev, &bus->devices, bus_list) if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || @@ -1449,7 +1439,7 @@ unsigned int __ref pci_rescan_bus(struct pci_bus *bus) &add_list); up_read(&pci_bus_sem); __pci_bus_assign_resources(bus, &add_list, NULL); - BUG_ON(add_list.next); + BUG_ON(!list_empty(&add_list)); pci_enable_bridges(bus); pci_bus_add_devices(bus); -- cgit v1.2.3-58-ga151 From 764242a0aec69e10b8dc0f4f0303a6800b09cf45 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:28 -0800 Subject: PCI: Merge pci_dev_resource_x and pci_dev_resource pci_dev_resource_x is a superset of pci_dev_resource and they're just temp structs used during resource reallocation. pci_dev_resource usage is quite limted. So just use pci_dev_resource_x, and rename it as new pci_dev_resource. -v2: According to Linus, Separate free_list change to another patch Suggested-by: Linus Torvalds Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 36 +++++++++++++++--------------------- 1 file changed, 15 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 4c5509e3c75a..af2a98a0ae7c 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -31,12 +31,6 @@ struct pci_dev_resource { struct list_head list; struct resource *res; struct pci_dev *dev; -}; - -struct pci_dev_resource_x { - struct list_head list; - struct resource *res; - struct pci_dev *dev; resource_size_t start; resource_size_t end; resource_size_t add_size; @@ -72,7 +66,7 @@ static int add_to_list(struct list_head *head, struct pci_dev *dev, struct resource *res, resource_size_t add_size, resource_size_t min_align) { - struct pci_dev_resource_x *tmp; + struct pci_dev_resource *tmp; tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); if (!tmp) { @@ -104,7 +98,7 @@ static void add_to_failed_list(struct list_head *head, static void remove_from_list(struct list_head *realloc_head, struct resource *res) { - struct pci_dev_resource_x *dev_res_x, *tmp; + struct pci_dev_resource *dev_res_x, *tmp; list_for_each_entry_safe(dev_res_x, tmp, realloc_head, list) { if (dev_res_x->res == res) { @@ -118,7 +112,7 @@ static void remove_from_list(struct list_head *realloc_head, static resource_size_t get_res_add_size(struct list_head *realloc_head, struct resource *res) { - struct pci_dev_resource_x *dev_res_x; + struct pci_dev_resource *dev_res_x; list_for_each_entry(dev_res_x, realloc_head, list) { if (dev_res_x->res == res) { @@ -227,7 +221,7 @@ static void reassign_resources_sorted(struct list_head *realloc_head, struct list_head *head) { struct resource *res; - struct pci_dev_resource_x *dev_res_x, *tmp; + struct pci_dev_resource *dev_res_x, *tmp; struct pci_dev_resource *dev_res; resource_size_t add_size; int idx; @@ -325,7 +319,7 @@ static void __assign_resources_sorted(struct list_head *head, */ LIST_HEAD(save_head); LIST_HEAD(local_fail_head); - struct pci_dev_resource_x *dev_res_x; + struct pci_dev_resource *dev_res_x; struct pci_dev_resource *dev_res; /* Check if optional add_size is there */ @@ -335,7 +329,7 @@ static void __assign_resources_sorted(struct list_head *head, /* Save original start, end, flags etc at first */ list_for_each_entry(dev_res, head, list) { if (add_to_list(&save_head, dev_res->dev, dev_res->res, 0, 0)) { - free_list(pci_dev_resource_x, &save_head); + free_list(pci_dev_resource, &save_head); goto requested_and_reassign; } } @@ -353,12 +347,12 @@ static void __assign_resources_sorted(struct list_head *head, /* Remove head list from realloc_head list */ list_for_each_entry(dev_res, head, list) remove_from_list(realloc_head, dev_res->res); - free_list(pci_dev_resource_x, &save_head); + free_list(pci_dev_resource, &save_head); free_list(pci_dev_resource, head); return; } - free_list(pci_dev_resource_x, &local_fail_head); + free_list(pci_dev_resource, &local_fail_head); /* Release assigned resource */ list_for_each_entry(dev_res, head, list) if (dev_res->res->parent) @@ -371,7 +365,7 @@ static void __assign_resources_sorted(struct list_head *head, res->end = dev_res_x->end; res->flags = dev_res_x->flags; } - free_list(pci_dev_resource_x, &save_head); + free_list(pci_dev_resource, &save_head); requested_and_reassign: /* Satisfy the must-have resource requests */ @@ -1256,7 +1250,7 @@ pci_assign_unassigned_resources(void) int tried_times = 0; enum release_type rel_type = leaf_only; LIST_HEAD(fail_head); - struct pci_dev_resource_x *dev_res_x; + struct pci_dev_resource *dev_res_x; unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; unsigned long failed_type; @@ -1304,7 +1298,7 @@ again: */ failed_type &= type_mask; if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) { - free_list(pci_dev_resource_x, &fail_head); + free_list(pci_dev_resource, &fail_head); goto enable_and_dump; } @@ -1335,7 +1329,7 @@ again: if (dev_res_x->dev->subordinate) res->flags = 0; } - free_list(pci_dev_resource_x, &fail_head); + free_list(pci_dev_resource, &fail_head); goto again; @@ -1356,7 +1350,7 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) want additional resources */ int tried_times = 0; LIST_HEAD(fail_head); - struct pci_dev_resource_x *dev_res_x; + struct pci_dev_resource *dev_res_x; int retval; unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; @@ -1372,7 +1366,7 @@ again: if (tried_times >= 2) { /* still fail, don't need to try more */ - free_list(pci_dev_resource_x, &fail_head); + free_list(pci_dev_resource, &fail_head); goto enable_all; } @@ -1400,7 +1394,7 @@ again: if (dev_res_x->dev->subordinate) res->flags = 0; } - free_list(pci_dev_resource_x, &fail_head); + free_list(pci_dev_resource, &fail_head); goto again; -- cgit v1.2.3-58-ga151 From b9b0bba96cf5acbf025f7829fbf6c09e74323b41 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:29 -0800 Subject: PCI: Rename dev_res_x to add_res or fail_res Linus says don't use dev_res_x because it doesn't communicate anything about usage. Rename them to add_res or fail_res etc according to context. Suggested-by: Linus Torvalds Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 110 ++++++++++++++++++++++++------------------------ 1 file changed, 55 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index af2a98a0ae7c..a6e427adc36d 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -95,32 +95,32 @@ static void add_to_failed_list(struct list_head *head, 0 /* dont care */); } -static void remove_from_list(struct list_head *realloc_head, +static void remove_from_list(struct list_head *head, struct resource *res) { - struct pci_dev_resource *dev_res_x, *tmp; + struct pci_dev_resource *dev_res, *tmp; - list_for_each_entry_safe(dev_res_x, tmp, realloc_head, list) { - if (dev_res_x->res == res) { - list_del(&dev_res_x->list); - kfree(dev_res_x); + list_for_each_entry_safe(dev_res, tmp, head, list) { + if (dev_res->res == res) { + list_del(&dev_res->list); + kfree(dev_res); break; } } } -static resource_size_t get_res_add_size(struct list_head *realloc_head, +static resource_size_t get_res_add_size(struct list_head *head, struct resource *res) { - struct pci_dev_resource *dev_res_x; + struct pci_dev_resource *dev_res; - list_for_each_entry(dev_res_x, realloc_head, list) { - if (dev_res_x->res == res) { - dev_printk(KERN_DEBUG, &dev_res_x->dev->dev, + list_for_each_entry(dev_res, head, list) { + if (dev_res->res == res) { + dev_printk(KERN_DEBUG, &dev_res->dev->dev, "%pR get_res_add_size add_size %llx\n", - dev_res_x->res, - (unsigned long long)dev_res_x->add_size); - return dev_res_x->add_size; + dev_res->res, + (unsigned long long)dev_res->add_size); + return dev_res->add_size; } } @@ -221,15 +221,15 @@ static void reassign_resources_sorted(struct list_head *realloc_head, struct list_head *head) { struct resource *res; - struct pci_dev_resource *dev_res_x, *tmp; + struct pci_dev_resource *add_res, *tmp; struct pci_dev_resource *dev_res; resource_size_t add_size; int idx; - list_for_each_entry_safe(dev_res_x, tmp, realloc_head, list) { + list_for_each_entry_safe(add_res, tmp, realloc_head, list) { bool found_match = false; - res = dev_res_x->res; + res = add_res->res; /* skip resource that has been reset */ if (!res->flags) goto out; @@ -244,26 +244,26 @@ static void reassign_resources_sorted(struct list_head *realloc_head, if (!found_match)/* just skip */ continue; - idx = res - &dev_res_x->dev->resource[0]; - add_size = dev_res_x->add_size; + idx = res - &add_res->dev->resource[0]; + add_size = add_res->add_size; if (!resource_size(res)) { - res->start = dev_res_x->start; + res->start = add_res->start; res->end = res->start + add_size - 1; - if (pci_assign_resource(dev_res_x->dev, idx)) + if (pci_assign_resource(add_res->dev, idx)) reset_resource(res); } else { - resource_size_t align = dev_res_x->min_align; - res->flags |= dev_res_x->flags & + resource_size_t align = add_res->min_align; + res->flags |= add_res->flags & (IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN); - if (pci_reassign_resource(dev_res_x->dev, idx, + if (pci_reassign_resource(add_res->dev, idx, add_size, align)) - dev_printk(KERN_DEBUG, &dev_res_x->dev->dev, + dev_printk(KERN_DEBUG, &add_res->dev->dev, "failed to add optional resources res=%pR\n", res); } out: - list_del(&dev_res_x->list); - kfree(dev_res_x); + list_del(&add_res->list); + kfree(add_res); } } @@ -319,7 +319,7 @@ static void __assign_resources_sorted(struct list_head *head, */ LIST_HEAD(save_head); LIST_HEAD(local_fail_head); - struct pci_dev_resource *dev_res_x; + struct pci_dev_resource *save_res; struct pci_dev_resource *dev_res; /* Check if optional add_size is there */ @@ -358,12 +358,12 @@ static void __assign_resources_sorted(struct list_head *head, if (dev_res->res->parent) release_resource(dev_res->res); /* Restore start/end/flags from saved list */ - list_for_each_entry(dev_res_x, &save_head, list) { - struct resource *res = dev_res_x->res; + list_for_each_entry(save_res, &save_head, list) { + struct resource *res = save_res->res; - res->start = dev_res_x->start; - res->end = dev_res_x->end; - res->flags = dev_res_x->flags; + res->start = save_res->start; + res->end = save_res->end; + res->flags = save_res->flags; } free_list(pci_dev_resource, &save_head); @@ -1250,7 +1250,7 @@ pci_assign_unassigned_resources(void) int tried_times = 0; enum release_type rel_type = leaf_only; LIST_HEAD(fail_head); - struct pci_dev_resource *dev_res_x; + struct pci_dev_resource *fail_res; unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; unsigned long failed_type; @@ -1289,8 +1289,8 @@ again: goto enable_and_dump; failed_type = 0; - list_for_each_entry(dev_res_x, &fail_head, list) - failed_type |= dev_res_x->flags; + list_for_each_entry(fail_res, &fail_head, list) + failed_type |= fail_res->flags; /* * io port are tight, don't try extra @@ -1313,20 +1313,20 @@ again: * Try to release leaf bridge's resources that doesn't fit resource of * child device under that bridge */ - list_for_each_entry(dev_res_x, &fail_head, list) { - bus = dev_res_x->dev->bus; + list_for_each_entry(fail_res, &fail_head, list) { + bus = fail_res->dev->bus; pci_bus_release_bridge_resources(bus, - dev_res_x->flags & type_mask, + fail_res->flags & type_mask, rel_type); } /* restore size and flags */ - list_for_each_entry(dev_res_x, &fail_head, list) { - struct resource *res = dev_res_x->res; + list_for_each_entry(fail_res, &fail_head, list) { + struct resource *res = fail_res->res; - res->start = dev_res_x->start; - res->end = dev_res_x->end; - res->flags = dev_res_x->flags; - if (dev_res_x->dev->subordinate) + res->start = fail_res->start; + res->end = fail_res->end; + res->flags = fail_res->flags; + if (fail_res->dev->subordinate) res->flags = 0; } free_list(pci_dev_resource, &fail_head); @@ -1350,7 +1350,7 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) want additional resources */ int tried_times = 0; LIST_HEAD(fail_head); - struct pci_dev_resource *dev_res_x; + struct pci_dev_resource *fail_res; int retval; unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; @@ -1377,21 +1377,21 @@ again: * Try to release leaf bridge's resources that doesn't fit resource of * child device under that bridge */ - list_for_each_entry(dev_res_x, &fail_head, list) { - struct pci_bus *bus = dev_res_x->dev->bus; - unsigned long flags = dev_res_x->flags; + list_for_each_entry(fail_res, &fail_head, list) { + struct pci_bus *bus = fail_res->dev->bus; + unsigned long flags = fail_res->flags; pci_bus_release_bridge_resources(bus, flags & type_mask, whole_subtree); } /* restore size and flags */ - list_for_each_entry(dev_res_x, &fail_head, list) { - struct resource *res = dev_res_x->res; + list_for_each_entry(fail_res, &fail_head, list) { + struct resource *res = fail_res->res; - res->start = dev_res_x->start; - res->end = dev_res_x->end; - res->flags = dev_res_x->flags; - if (dev_res_x->dev->subordinate) + res->start = fail_res->start; + res->end = fail_res->end; + res->flags = fail_res->flags; + if (fail_res->dev->subordinate) res->flags = 0; } free_list(pci_dev_resource, &fail_head); -- cgit v1.2.3-58-ga151 From bffc56d41102705d809f88c29918a9c33d2900f7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:30 -0800 Subject: PCI: make free_list() into a function After merging struct pci_dev_resource_x and pci_dev_resource, We can use a function instead of macro now. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index a6e427adc36d..c845d18bb126 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -38,13 +38,15 @@ struct pci_dev_resource { unsigned long flags; }; -#define free_list(type, head) do { \ - struct type *dev_res, *tmp; \ - list_for_each_entry_safe(dev_res, tmp, head, list) { \ - list_del(&dev_res->list); \ - kfree(dev_res); \ - } \ -} while (0) +static void free_list(struct list_head *head) +{ + struct pci_dev_resource *dev_res, *tmp; + + list_for_each_entry_safe(dev_res, tmp, head, list) { + list_del(&dev_res->list); + kfree(dev_res); + } +} int pci_realloc_enable = 0; #define pci_realloc_enabled() pci_realloc_enable @@ -329,7 +331,7 @@ static void __assign_resources_sorted(struct list_head *head, /* Save original start, end, flags etc at first */ list_for_each_entry(dev_res, head, list) { if (add_to_list(&save_head, dev_res->dev, dev_res->res, 0, 0)) { - free_list(pci_dev_resource, &save_head); + free_list(&save_head); goto requested_and_reassign; } } @@ -347,12 +349,12 @@ static void __assign_resources_sorted(struct list_head *head, /* Remove head list from realloc_head list */ list_for_each_entry(dev_res, head, list) remove_from_list(realloc_head, dev_res->res); - free_list(pci_dev_resource, &save_head); - free_list(pci_dev_resource, head); + free_list(&save_head); + free_list(head); return; } - free_list(pci_dev_resource, &local_fail_head); + free_list(&local_fail_head); /* Release assigned resource */ list_for_each_entry(dev_res, head, list) if (dev_res->res->parent) @@ -365,7 +367,7 @@ static void __assign_resources_sorted(struct list_head *head, res->end = save_res->end; res->flags = save_res->flags; } - free_list(pci_dev_resource, &save_head); + free_list(&save_head); requested_and_reassign: /* Satisfy the must-have resource requests */ @@ -375,7 +377,7 @@ requested_and_reassign: requests */ if (realloc_head) reassign_resources_sorted(realloc_head, head); - free_list(pci_dev_resource, head); + free_list(head); } static void pdev_assign_resources_sorted(struct pci_dev *dev, @@ -1298,7 +1300,7 @@ again: */ failed_type &= type_mask; if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) { - free_list(pci_dev_resource, &fail_head); + free_list(&fail_head); goto enable_and_dump; } @@ -1329,7 +1331,7 @@ again: if (fail_res->dev->subordinate) res->flags = 0; } - free_list(pci_dev_resource, &fail_head); + free_list(&fail_head); goto again; @@ -1366,7 +1368,7 @@ again: if (tried_times >= 2) { /* still fail, don't need to try more */ - free_list(pci_dev_resource, &fail_head); + free_list(&fail_head); goto enable_all; } @@ -1394,7 +1396,7 @@ again: if (fail_res->dev->subordinate) res->flags = 0; } - free_list(pci_dev_resource, &fail_head); + free_list(&fail_head); goto again; -- cgit v1.2.3-58-ga151 From b592443d9045f0880eb4d8cc9125075744db4b9e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:31 -0800 Subject: PCI: add debug print out for add_size For use in debugging resource reallocation. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index c845d18bb126..ae0b1f2c9e0a 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -118,10 +118,13 @@ static resource_size_t get_res_add_size(struct list_head *head, list_for_each_entry(dev_res, head, list) { if (dev_res->res == res) { + int idx = res - &dev_res->dev->resource[0]; + dev_printk(KERN_DEBUG, &dev_res->dev->dev, - "%pR get_res_add_size add_size %llx\n", - dev_res->res, + "res[%d]=%pR get_res_add_size add_size %llx\n", + idx, dev_res->res, (unsigned long long)dev_res->add_size); + return dev_res->add_size; } } @@ -260,8 +263,9 @@ static void reassign_resources_sorted(struct list_head *realloc_head, if (pci_reassign_resource(add_res->dev, idx, add_size, align)) dev_printk(KERN_DEBUG, &add_res->dev->dev, - "failed to add optional resources res=%pR\n", - res); + "failed to add %llx res[%d]=%pR\n", + (unsigned long long)add_size, + idx, res); } out: list_del(&add_res->list); @@ -760,8 +764,12 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size, b_res->start = 4096; b_res->end = b_res->start + size0 - 1; b_res->flags |= IORESOURCE_STARTALIGN; - if (size1 > size0 && realloc_head) + if (size1 > size0 && realloc_head) { add_to_list(realloc_head, bus->self, b_res, size1-size0, 4096); + dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window " + "%pR to [bus %02x-%02x] add_size %lx\n", b_res, + bus->secondary, bus->subordinate, size1-size0); + } } /** @@ -873,8 +881,12 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, b_res->start = min_align; b_res->end = size0 + min_align - 1; b_res->flags |= IORESOURCE_STARTALIGN | mem64_mask; - if (size1 > size0 && realloc_head) + if (size1 > size0 && realloc_head) { add_to_list(realloc_head, bus->self, b_res, size1-size0, min_align); + dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window " + "%pR to [bus %02x-%02x] add_size %llx\n", b_res, + bus->secondary, bus->subordinate, (unsigned long long)size1-size0); + } return 1; } -- cgit v1.2.3-58-ga151 From 67cc7e26a5c46508ee00b9fe169aad833b798025 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jan 2012 02:08:32 -0800 Subject: PCI: remove add_to_failed_list() Only one user; just use add_to_list instead. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index ae0b1f2c9e0a..090217afb4e1 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -89,14 +89,6 @@ static int add_to_list(struct list_head *head, return 0; } -static void add_to_failed_list(struct list_head *head, - struct pci_dev *dev, struct resource *res) -{ - add_to_list(head, dev, res, - 0 /* dont care */, - 0 /* dont care */); -} - static void remove_from_list(struct list_head *head, struct resource *res) { @@ -302,8 +294,10 @@ static void assign_requested_resources_sorted(struct list_head *head, */ if (!((idx == PCI_ROM_RESOURCE) && (!(res->flags & IORESOURCE_ROM_ENABLE)))) - add_to_failed_list(fail_head, - dev_res->dev, res); + add_to_list(fail_head, + dev_res->dev, res, + 0 /* dont care */, + 0 /* dont care */); } reset_resource(res); } -- cgit v1.2.3-58-ga151 From ac205b7bb72fa4227d2e79979bbe2b4687cdf44d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 27 Jan 2012 10:55:09 -0800 Subject: PCI: make sriov work with hotplug remove When hot removing a pci express module that has a pcie switch and supports SRIOV, we got: [ 5918.610127] pciehp 0000:80:02.2:pcie04: pcie_isr: intr_loc 1 [ 5918.615779] pciehp 0000:80:02.2:pcie04: Attention button interrupt received [ 5918.622730] pciehp 0000:80:02.2:pcie04: Button pressed on Slot(3) [ 5918.629002] pciehp 0000:80:02.2:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 1f9 [ 5918.637416] pciehp 0000:80:02.2:pcie04: PCI slot #3 - powering off due to button press. [ 5918.647125] pciehp 0000:80:02.2:pcie04: pcie_isr: intr_loc 10 [ 5918.653039] pciehp 0000:80:02.2:pcie04: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200 [ 5918.661229] pciehp 0000:80:02.2:pcie04: pciehp_set_attention_status: SLOTCTRL a8 write cmd c0 [ 5924.667627] pciehp 0000:80:02.2:pcie04: Disabling domain:bus:device=0000:b0:00 [ 5924.674909] pciehp 0000:80:02.2:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 2f9 [ 5924.683262] pciehp 0000:80:02.2:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:b0:00 [ 5924.693976] libfcoe_device_notification: NETDEV_UNREGISTER eth6 [ 5924.764979] libfcoe_device_notification: NETDEV_UNREGISTER eth14 [ 5924.873539] libfcoe_device_notification: NETDEV_UNREGISTER eth15 [ 5924.995209] libfcoe_device_notification: NETDEV_UNREGISTER eth16 [ 5926.114407] sxge 0000:b2:00.0: PCI INT A disabled [ 5926.119342] BUG: unable to handle kernel NULL pointer dereference at (null) [ 5926.127189] IP: [] pci_stop_bus_device+0x33/0x83 [ 5926.133377] PGD 0 [ 5926.135402] Oops: 0000 [#1] SMP [ 5926.138659] CPU 2 [ 5926.140499] Modules linked in: ... [ 5926.143754] [ 5926.275823] Call Trace: [ 5926.278267] [] pci_stop_bus_device+0x30/0x83 [ 5926.284180] [] pci_remove_bus_device+0x1a/0xba [ 5926.290264] [] pciehp_unconfigure_device+0x110/0x17b [ 5926.296866] [] ? pciehp_disable_slot+0x188/0x188 [ 5926.303123] [] pciehp_disable_slot+0x11e/0x188 [ 5926.309206] [] pciehp_power_thread+0x8f/0xe0 ... +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]-- | +-02.2-[b0-bf]----00.0-[b1-b3]--+-02.0-[b2]--+-00.0 Device | | | +-00.1 Device | | | +-00.2 Device | | | \-00.3 Device | | \-03.0-[b3]--+-00.0 Device | | +-00.1 Device | | +-00.2 Device | | \-00.3 Device root complex: 80:02.2 pci express modules: have pcie switch and are listed as b0:00.0, b1:02.0 and b1:03.0. end devices are b2:00.0 and b3.00.0. VFs are: b2:00.1,... b2:00.3, and b3:00.1,...,b3:00.3 Root cause: when doing pci_stop_bus_device() with phys fn, it will stop virt fn and remove the fn, so list_for_each_safe(l, n, &bus->devices) will have problem to refer freed n that is pointed to vf entry. Solution is just replacing list_for_each_safe() with list_for_each_prev_safe(). This will make sure we can get valid n pointer to PF instead of the freed VF pointer (because newly added devices are inserted to the bus->devices list tail). During reviewing the patch, Bjorn said: | The PCI hot-remove path calls pci_stop_bus_devices() via | pci_remove_bus_device(). | | pci_stop_bus_devices() traverses the bus->devices list (point A below), | stopping each device in turn, which calls the driver remove() method. When | the device is an SR-IOV PF, the driver calls pci_disable_sriov(), which | also uses pci_remove_bus_device() to remove the VF devices from the | bus->devices list (point B). | | pci_remove_bus_device | pci_stop_bus_device | pci_stop_bus_devices(subordinate) | list_for_each(bus->devices) <-- A | pci_stop_bus_device(PF) | ... | driver->remove | pci_disable_sriov | ... | pci_remove_bus_device(VF) | <-- B | | At B, we're changing the same list we're iterating through at A, so when | the driver remove() method returns, the pci_stop_bus_devices() iterator has | a pointer to a list entry that has already been freed. Discussion thread can be found : https://lkml.org/lkml/2011/10/15/141 https://lkml.org/lkml/2012/1/23/360 -v5: According to Linus to make remove more robust, Change to list_for_each_prev_safe instead. That is more reasonable, because those devices are added to tail of the list before. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/remove.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index ef8b18c48f26..82f8ae572703 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -144,7 +144,15 @@ static void pci_stop_bus_devices(struct pci_bus *bus) { struct list_head *l, *n; - list_for_each_safe(l, n, &bus->devices) { + /* + * VFs could be removed by pci_remove_bus_device() in the + * pci_stop_bus_devices() code path for PF. + * aka, bus->devices get updated in the process. + * but VFs are inserted after PFs when SRIOV is enabled for PF, + * We can iterate the list backwards to get prev valid PF instead + * of removed VF. + */ + list_for_each_prev_safe(l, n, &bus->devices) { struct pci_dev *dev = pci_dev_b(l); pci_stop_bus_device(dev); } -- cgit v1.2.3-58-ga151 From efdc87dab1cdf25ba631181ac0ead3fb2023dd10 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 27 Jan 2012 10:55:10 -0800 Subject: PCI: Separate pci_bus_read_dev_vendor_id from pci_scan_device We can reuse it for pciehp probing. -v2: according to Kenji, fix crs timeout checking, and export the function for later use when pciehp is compiled as a module. Suggested-by: Matthew Wilcox Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/pci.h | 2 ++ drivers/pci/probe.c | 48 +++++++++++++++++++++++++++++++----------------- 2 files changed, 33 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 1009a5e88e53..aaf7ff8c517f 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -207,6 +207,8 @@ enum pci_bar_type { pci_bar_mem64, /* A 64-bit memory BAR */ }; +bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *pl, + int crs_timeout); extern int pci_setup_device(struct pci_dev *dev); extern int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, struct resource *res, unsigned int reg); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index aad7d0ff6b08..9f2ff8c5dc2f 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1118,40 +1118,54 @@ struct pci_dev *alloc_pci_dev(void) } EXPORT_SYMBOL(alloc_pci_dev); -/* - * Read the config data for a PCI device, sanity-check it - * and fill in the dev structure... - */ -static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) +bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, + int crs_timeout) { - struct pci_dev *dev; - u32 l; int delay = 1; - if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l)) - return NULL; + if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) + return false; /* some broken boards return 0 or ~0 if a slot is empty: */ - if (l == 0xffffffff || l == 0x00000000 || - l == 0x0000ffff || l == 0xffff0000) - return NULL; + if (*l == 0xffffffff || *l == 0x00000000 || + *l == 0x0000ffff || *l == 0xffff0000) + return false; /* Configuration request Retry Status */ - while (l == 0xffff0001) { + while (*l == 0xffff0001) { + if (!crs_timeout) + return false; + msleep(delay); delay *= 2; - if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l)) - return NULL; + if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) + return false; /* Card hasn't responded in 60 seconds? Must be stuck. */ - if (delay > 60 * 1000) { + if (delay > crs_timeout) { printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not " "responding\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); - return NULL; + return false; } } + return true; +} +EXPORT_SYMBOL(pci_bus_read_dev_vendor_id); + +/* + * Read the config data for a PCI device, sanity-check it + * and fill in the dev structure... + */ +static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + u32 l; + + if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000)) + return NULL; + dev = alloc_pci_dev(); if (!dev) return NULL; -- cgit v1.2.3-58-ga151 From 2f5d8e4ff947ad6673397083b48719cd6c59cd61 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 27 Jan 2012 10:55:11 -0800 Subject: PCI: pciehp: replace unconditional sleep with config space access check During reviewing | PCI: pciehp: wait 1000 ms before Link Training check Linus said: >... > That's a *long* time, and it's irritating to the user. It makes the > user think "the machine is slow". >... > And quite frankly, an unconditional one-second delay here seems bad. >Two seconds was unacceptable, one second is just bad. Try to access the pci conf of a pci device that is supposed to show up in 1s. If we can read back a valid vendor/device id, we can return early. Related discussion could be found: https://lkml.org/lkml/2011/12/6/339 -v2: seperate code to pci_bus_read_dev_vendor_id() from pci_scan_device() and reuse it from pciehp code. Suggested by Matthew Wilcox. -v3: According to Kenj, don't use array in stack, and don't wait too long for crs, also return fail status if not found. Also separate pci_bus_dev_read_vendor_id() change to another patch. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 49 ++++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index bcdbb1643621..7dc9e33746a6 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -265,10 +265,37 @@ static void pcie_wait_link_active(struct controller *ctrl) ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n"); } +static bool pci_bus_check_dev(struct pci_bus *bus, int devfn) +{ + u32 l; + int count = 0; + int delay = 1000, step = 20; + bool found = false; + + do { + found = pci_bus_read_dev_vendor_id(bus, devfn, &l, 0); + count++; + + if (found) + break; + + msleep(step); + delay -= step; + } while (delay > 0); + + if (count > 1 && pciehp_debug) + printk(KERN_DEBUG "pci %04x:%02x:%02x.%d id reading try %d times with interval %d ms to get %08x\n", + pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), count, step, l); + + return found; +} + int pciehp_check_link_status(struct controller *ctrl) { u16 lnk_status; int retval = 0; + bool found = false; /* * Data Link Layer Link Active Reporting must be capable for @@ -280,13 +307,10 @@ int pciehp_check_link_status(struct controller *ctrl) else msleep(1000); - /* - * Need to wait for 1000 ms after Data Link Layer Link Active - * (DLLLA) bit reads 1b before sending configuration request. - * We need it before checking Link Training (LT) bit becuase - * LT is still set even after DLLLA bit is set on some platform. - */ - msleep(1000); + /* wait 100ms before read pci conf, and try in 1s */ + msleep(100); + found = pci_bus_check_dev(ctrl->pcie->port->subordinate, + PCI_DEVFN(0, 0)); retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); if (retval) { @@ -302,16 +326,11 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } - /* - * If the port supports Link speeds greater than 5.0 GT/s, we - * must wait for 100 ms after Link training completes before - * sending configuration request. - */ - if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT) - msleep(100); - pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); + if (!found && !retval) + retval = -1; + return retval; } -- cgit v1.2.3-58-ga151 From 4e2ce405b24eef9f4cc947bf5f430ca27b474f1f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 27 Jan 2012 10:55:12 -0800 Subject: PCI: pciehp: make check_link_active more helpful A few changes: - remove the 'inline' and let the complier decide - return a bool to indicate whether the link was active - add a debug message to indicate link state when it beocmes active Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 7dc9e33746a6..a8c1f74a1e36 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -241,13 +241,20 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) return retval; } -static inline int check_link_active(struct controller *ctrl) +static bool check_link_active(struct controller *ctrl) { - u16 link_status; + bool ret = false; + u16 lnk_status; - if (pciehp_readw(ctrl, PCI_EXP_LNKSTA, &link_status)) - return 0; - return !!(link_status & PCI_EXP_LNKSTA_DLLLA); + if (pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status)) + return ret; + + ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA); + + if (ret) + ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); + + return ret; } static void pcie_wait_link_active(struct controller *ctrl) -- cgit v1.2.3-58-ga151 From bffe4f72fcdd92bfb24909d586d1636e5cec500d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 27 Jan 2012 10:55:13 -0800 Subject: PCI: pciehp: Add pcie_wait_link_not_active() Will use it for link disable status checking. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index a8c1f74a1e36..4ebdc1de2cb4 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -257,19 +257,30 @@ static bool check_link_active(struct controller *ctrl) return ret; } -static void pcie_wait_link_active(struct controller *ctrl) +static void __pcie_wait_link_active(struct controller *ctrl, bool active) { int timeout = 1000; - if (check_link_active(ctrl)) + if (check_link_active(ctrl) == active) return; while (timeout > 0) { msleep(10); timeout -= 10; - if (check_link_active(ctrl)) + if (check_link_active(ctrl) == active) return; } - ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n"); + ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n", + active ? "set" : "cleared"); +} + +static void pcie_wait_link_active(struct controller *ctrl) +{ + __pcie_wait_link_active(ctrl, true); +} + +static void pcie_wait_link_not_active(struct controller *ctrl) +{ + __pcie_wait_link_active(ctrl, false); } static bool pci_bus_check_dev(struct pci_bus *bus, int devfn) -- cgit v1.2.3-58-ga151 From 7f822999e12a144e68c915194267108f8051cf9b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 27 Jan 2012 10:55:14 -0800 Subject: PCI: pciehp: Add Disable/enable link functions Will use it during power off/on of slots Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 4ebdc1de2cb4..db33688af588 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -352,6 +352,42 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } +static int __pciehp_link_set(struct controller *ctrl, bool enable) +{ + u16 lnk_ctrl; + int retval = 0; + + retval = pciehp_readw(ctrl, PCI_EXP_LNKCTL, &lnk_ctrl); + if (retval) { + ctrl_err(ctrl, "Cannot read LNKCTRL register\n"); + return retval; + } + + if (enable) + lnk_ctrl &= ~PCI_EXP_LNKCTL_LD; + else + lnk_ctrl |= PCI_EXP_LNKCTL_LD; + + retval = pciehp_writew(ctrl, PCI_EXP_LNKCTL, lnk_ctrl); + if (retval) { + ctrl_err(ctrl, "Cannot write LNKCTRL register\n"); + return retval; + } + ctrl_dbg(ctrl, "%s: lnk_ctrl = %x\n", __func__, lnk_ctrl); + + return retval; +} + +static int pciehp_link_enable(struct controller *ctrl) +{ + return __pciehp_link_set(ctrl, true); +} + +static int pciehp_link_disable(struct controller *ctrl) +{ + return __pciehp_link_set(ctrl, false); +} + int pciehp_get_attention_status(struct slot *slot, u8 *status) { struct controller *ctrl = slot->ctrl; -- cgit v1.2.3-58-ga151 From 2debd9289997fc5d1c0043b41201a8b40d5e11d0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 27 Jan 2012 10:55:15 -0800 Subject: PCI: pciehp: Disable/enable link during slot power off/on On a system with a repeater on the system board to support gen2 hotplug, we found that when an ExpressModule is removed from some slots, /var/log/messages will be full of "card present/not present" warnings. It turns out the root complex is continually trying to train the link to the repeater because the repeater has not been reset. This patch will disable the link at removal time to allow the repeater to be reset properly. This also prevents a potential AER message at removal time. Also, when testing hotplug on a system under development, we found if we boot the system without an EM installed, and later hot-add an EM, it does not work with Linux, but another OS is ok. The root cause is that BIOS left link disabled when slot was empty at boot time, and other OS is modifying the link disable bit in link ctrl during power on/off. So we should do the same thing to disable/enable link during power off/on. -v2: check link DLLA bit instead of 100ms waiting. Separate link disable/enable functions to another patch. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index db33688af588..a960faec1021 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -606,6 +606,10 @@ int pciehp_power_on_slot(struct slot * slot) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); + retval = pciehp_link_enable(ctrl); + if (retval) + ctrl_err(ctrl, "%s: Can not enable the link!\n", __func__); + return retval; } @@ -616,6 +620,14 @@ int pciehp_power_off_slot(struct slot * slot) u16 cmd_mask; int retval; + /* Disable the link at first */ + pciehp_link_disable(ctrl); + /* wait the link is down */ + if (ctrl->link_active_reporting) + pcie_wait_link_not_active(ctrl); + else + msleep(1000); + slot_cmd = POWER_OFF; cmd_mask = PCI_EXP_SLTCTL_PCC; retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); -- cgit v1.2.3-58-ga151 From 26f41062f28de65e11d3cf353e52d0be73442be1 Mon Sep 17 00:00:00 2001 From: "Kay, Allen M" Date: Thu, 26 Jan 2012 10:25:53 -0800 Subject: PCI: check for pci bar restore completion and retry On some OEM systems, pci_restore_state() is called while FLR has not yet completed. As a result, PCI BAR register restore is not successful. This fix reads back the restored value and compares it with saved value and re-tries 10 times before giving up. Signed-off-by: Jean Guyader Signed-off-by: Eric Chanudet Signed-off-by: Allen Kay Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 053670e09e2b..9c89447e7b21 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -959,6 +959,7 @@ void pci_restore_state(struct pci_dev *dev) { int i; u32 val; + int tries; if (!dev->state_saved) return; @@ -973,12 +974,16 @@ void pci_restore_state(struct pci_dev *dev) */ for (i = 15; i >= 0; i--) { pci_read_config_dword(dev, i * 4, &val); - if (val != dev->saved_config_space[i]) { + tries = 10; + while (tries && val != dev->saved_config_space[i]) { dev_dbg(&dev->dev, "restoring config " "space at offset %#x (was %#x, writing %#x)\n", i, val, (int)dev->saved_config_space[i]); pci_write_config_dword(dev,i * 4, dev->saved_config_space[i]); + pci_read_config_dword(dev, i * 4, &val); + mdelay(10); + tries--; } } pci_restore_pcix_state(dev); -- cgit v1.2.3-58-ga151 From 309c665110ee6a8d9a28f802c41eaab50ceebbf7 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Mon, 30 Jan 2012 23:00:10 +0100 Subject: PCI hotplug: cpcihp: fix debug module parameter to be bool Fix debug variable from module parameter to be really bool to fix 'warning: return from incompatible pointer type'. Acked-by: Scott Murray Signed-off-by: Danny Kukawka Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/cpcihp_generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c index fb3f84661bdc..81af764c629b 100644 --- a/drivers/pci/hotplug/cpcihp_generic.c +++ b/drivers/pci/hotplug/cpcihp_generic.c @@ -62,7 +62,7 @@ #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) /* local variables */ -static int debug; +static bool debug; static char *bridge; static u8 bridge_busnr; static u8 bridge_slot; -- cgit v1.2.3-58-ga151 From 3209874a1da2c51c7325e601d9634189ee178ad6 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 30 Jan 2012 20:52:07 -0800 Subject: PCI: Annotate PCI quirks in initcall_debug style While diagnosing some boot time issues on a platform, all that I could see in the bootgraph/dmesg was that the system was spending a lot of time in applying one or more PCI quirks... which was virtually undebuggable. This patch adds printk's in "initcall_debug" style to the dmesg, which are added when the user asks for the initcall_debug (the nr one tool to use when debugging boot hangs or boot time issues) kernel command line option. v2: add #includes so quirks can build on non-x86 Signed-off-by: Arjan van de Ven Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 64765474676f..f5d09f4066f3 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -26,6 +26,8 @@ #include #include #include +#include +#include #include /* isa_dma_bridge_buggy */ #include "pci.h" @@ -2906,6 +2908,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); + +static void do_one_fixup_debug(void (*fn)(struct pci_dev *dev), struct pci_dev *dev) +{ + ktime_t calltime, delta, rettime; + unsigned long long duration; + + printk(KERN_DEBUG "calling %pF @ %i\n", fn, task_pid_nr(current)); + calltime = ktime_get(); + fn(dev); + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + printk(KERN_DEBUG "pci fixup %pF returned after %lld usecs\n", fn, + duration); +} + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { @@ -2913,7 +2931,10 @@ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) && (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) { dev_dbg(&dev->dev, "calling %pF\n", f->hook); - f->hook(dev); + if (initcall_debug) + do_one_fixup_debug(f->hook, dev); + else + f->hook(dev); } f++; } -- cgit v1.2.3-58-ga151 From f67fd55fa96f7d7295b43ffbc4a97d8f55e473aa Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Wed, 7 Dec 2011 22:08:11 +0100 Subject: PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs Some BIOS implementations leave the Intel GPU interrupts enabled, even though no one is handling them (f.e. i915 driver is never loaded). Additionally the interrupt destination is not set up properly and the interrupt ends up -somewhere-. These spurious interrupts are "sticky" and the kernel disables the (shared) interrupt line after 100.000+ generated interrupts. Fix it by disabling the still enabled interrupts. This resolves crashes often seen on monitor unplug. Tested on the following boards: - Intel DH61CR: Affected - Intel DH67BL: Affected - Intel S1200KP server board: Affected - Asus P8H61-M LE: Affected, but system does not crash. Probably the IRQ ends up somewhere unnoticed. According to reports on the net, the Intel DH61WW board is also affected. Many thanks to Jesse Barnes from Intel for helping with the register configuration and to Intel in general for providing public hardware documentation. Signed-off-by: Thomas Jarosch Tested-by: Charlie Suffin Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f5d09f4066f3..fb544d6d29f6 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2924,6 +2924,40 @@ static void do_one_fixup_debug(void (*fn)(struct pci_dev *dev), struct pci_dev * duration); } +/* + * Some BIOS implementations leave the Intel GPU interrupts enabled, + * even though no one is handling them (f.e. i915 driver is never loaded). + * Additionally the interrupt destination is not set up properly + * and the interrupt ends up -somewhere-. + * + * These spurious interrupts are "sticky" and the kernel disables + * the (shared) interrupt line after 100.000+ generated interrupts. + * + * Fix it by disabling the still enabled interrupts. + * This resolves crashes often seen on monitor unplug. + */ +#define I915_DEIER_REG 0x4400c +static void __devinit disable_igfx_irq(struct pci_dev *dev) +{ + void __iomem *regs = pci_iomap(dev, 0, 0); + if (regs == NULL) { + dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n"); + return; + } + + /* Check if any interrupt line is still enabled */ + if (readl(regs + I915_DEIER_REG) != 0) { + dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; " + "disabling\n"); + + writel(0, regs + I915_DEIER_REG); + } + + pci_iounmap(dev, regs); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { -- cgit v1.2.3-58-ga151 From ad71c96213a68dfe6d761e3ff7ac7ac267fd612a Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 3 Feb 2012 10:18:13 -0500 Subject: PCI: pcie: Add support for setting default ASPM policy Distributions may wish to provide different defaults for PCIE ASPM depending on their target audience. Provide a configuration option for choosing the default policy. Signed-off-by: Matthew Garrett Signed-off-by: Jesse Barnes --- drivers/pci/pcie/Kconfig | 25 +++++++++++++++++++++++++ drivers/pci/pcie/aspm.c | 8 ++++++++ 2 files changed, 33 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 72962cc92e0a..6c8bc5809787 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -55,6 +55,31 @@ config PCIEASPM_DEBUG This enables PCI Express ASPM debug support. It will add per-device interface to control ASPM. +choice + prompt "Default ASPM policy" + default PCIEASPM_DEFAULT + depends on PCIEASPM + +config PCIEASPM_DEFAULT + bool "BIOS default" + depends on PCIEASPM + help + Use the BIOS defaults for PCI Express ASPM. + +config PCIEASPM_POWERSAVE + bool "Powersave" + depends on PCIEASPM + help + Enable PCI Express ASPM L0s and L1 where possible, even if the + BIOS did not. + +config PCIEASPM_PERFORMANCE + bool "Performance" + depends on PCIEASPM + help + Disable PCI Express ASPM L0s and L1, even if the BIOS enabled them. +endchoice + config PCIE_PME def_bool y depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 1cfbf228fbb1..a0de5e123046 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -76,7 +76,15 @@ static LIST_HEAD(link_list); #define POLICY_DEFAULT 0 /* BIOS default setting */ #define POLICY_PERFORMANCE 1 /* high performance */ #define POLICY_POWERSAVE 2 /* high power saving */ + +#ifdef CONFIG_PCIEASPM_PERFORMANCE +static int aspm_policy = POLICY_PERFORMANCE; +#elif defined CONFIG_PCIEASPM_POWERSAVE +static int aspm_policy = POLICY_POWERSAVE; +#else static int aspm_policy; +#endif + static const char *policy_str[] = { [POLICY_DEFAULT] = "default", [POLICY_PERFORMANCE] = "performance", -- cgit v1.2.3-58-ga151 From 09cedbef4428580a09b342a7a92a262cfb5cbf25 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 4 Feb 2012 22:55:01 -0800 Subject: PCI: Fix /sys warning when sriov enabled and card is hot removed sysfs is a bit stricter now and emits warnings in more cases. For SRIOV hotplug, we are calling pci_stop_dev() for each VF first (after we update pci_stop_bus_devices) which remove each VF subdir. So double check the VF dir in /sys before trying to remove the physfn link. Signed-of-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/iov.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index 0dab5ecf61bb..687b3c8e8e3b 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -173,7 +173,13 @@ static void virtfn_remove(struct pci_dev *dev, int id, int reset) sprintf(buf, "virtfn%u", id); sysfs_remove_link(&dev->dev.kobj, buf); - sysfs_remove_link(&virtfn->dev.kobj, "physfn"); + /* + * pci_stop_dev() could have been called for this virtfn already, + * so the directory for the virtfn may have been removed before. + * Double check to avoid spurious sysfs warnings. + */ + if (virtfn->dev.kobj.sd) + sysfs_remove_link(&virtfn->dev.kobj, "physfn"); mutex_lock(&iov->dev->sriov->lock); pci_remove_bus_device(virtfn); -- cgit v1.2.3-58-ga151 From 5b415f1e79e0c09366f26e3eabe751642059285a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 7 Feb 2012 00:50:35 +0100 Subject: PCI / PM: Disable wakeup during shutdown for devices not enabled to wake up If a PCI device is enabled to generate wakeup signals (PME) when put into a low-power state by runtime PM, it will be still enabled to generate those signals after the system shutdown, unless its driver's .shutdown() callback takes care of the wakeup signals generation setting. Moreover, there are devices that are not enabled to wake up the system and that are configured by runtime PM to generate wakeup signals so that (runtime) remote wakeup works with them. Those devices should be reconfigured during system shutdown so that they don't generate wakeup signals, but at least some drivers don't do that. However, that very well may be done by the PCI core so that drivers don't have to worry about it. For this reason, modify pci_device_shutdown() to disable the generation of wakeup events for devices not supposed to wake up the system. References: https://bugzilla.kernel.org/show_bug.cgi?id=37952 Reported-and-tested-by: Kamil Iskra Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 3623d65f8b86..5d19695c771a 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -430,6 +430,16 @@ static void pci_device_shutdown(struct device *dev) drv->shutdown(pci_dev); pci_msi_shutdown(pci_dev); pci_msix_shutdown(pci_dev); + + /* + * Devices may be enabled to wake up by runtime PM, but they need not + * be supposed to wake up the system from its "power off" state (e.g. + * ACPI S5). Therefore disable wakeup for all devices that aren't + * supposed to wake up the system at this point. The state argument + * will be ignored by pci_enable_wake(). + */ + if (!device_may_wakeup(dev)) + pci_enable_wake(pci_dev, PCI_UNKNOWN, false); } #ifdef CONFIG_PM -- cgit v1.2.3-58-ga151 From dcef0d06b34a80071da4496556e85f9bf3b3c0bf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 10 Feb 2012 15:33:46 -0800 Subject: PCI: Disable cardbus bridge MEM1 prefetchable bit Some BIOSes enable prefetch on both MEM0 and MEM1. But the cardbus code assumes MEM1 is non-pref... Discussion could be found at: https://lkml.org/lkml/2012/1/12/1 https://bugzilla.kernel.org/show_bug.cgi?id=41622#c23 Signed-off-by: Yinghai Lu Tested-by: Dominik Brodowski Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 090217afb4e1..d5897c32f669 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -914,6 +914,14 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, if (realloc_head) add_to_list(realloc_head, bridge, b_res+1, pci_cardbus_io_size, 0 /* dont care */); + /* MEM1 must not be pref mmio */ + pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl); + if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM1) { + ctrl &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1; + pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl); + pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl); + } + /* * Check whether prefetchable memory is supported * by this bridge. -- cgit v1.2.3-58-ga151 From 1184893439b1a7532b579a85a354db12bbf1b277 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 10 Feb 2012 15:33:47 -0800 Subject: PCI: Fix "cardbus bridge resources as optional" size handling We should not set the requested size to -2; that will confuse the resource list sorting with align when SIZEALIGN is used. Change to STARTALIGN and pass align from start; we are safe to do that just as we do that regular pci bridge. In the long run, we should just treat cardbus like a regular pci bridge. Also fix the case when realloc_head is not passed: we should keep the requested size. Signed-off-by: Yinghai Lu Tested-by: Dominik Brodowski Acked-by: Ram Pai Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 65 ++++++++++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index d5897c32f669..3b3932a6465f 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -898,21 +898,30 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, { struct pci_dev *bridge = bus->self; struct resource *b_res = &bridge->resource[PCI_BRIDGE_RESOURCES]; + resource_size_t b_res_3_size = pci_cardbus_mem_size * 2; u16 ctrl; /* * Reserve some resources for CardBus. We reserve * a fixed amount of bus space for CardBus bridges. */ - b_res[0].start = 0; - b_res[0].flags |= IORESOURCE_IO | IORESOURCE_SIZEALIGN; - if (realloc_head) - add_to_list(realloc_head, bridge, b_res, pci_cardbus_io_size, 0 /* dont care */); + b_res[0].start = pci_cardbus_io_size; + b_res[0].end = b_res[0].start + pci_cardbus_io_size - 1; + b_res[0].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN; + if (realloc_head) { + b_res[0].end -= pci_cardbus_io_size; + add_to_list(realloc_head, bridge, b_res, pci_cardbus_io_size, + pci_cardbus_io_size); + } - b_res[1].start = 0; - b_res[1].flags |= IORESOURCE_IO | IORESOURCE_SIZEALIGN; - if (realloc_head) - add_to_list(realloc_head, bridge, b_res+1, pci_cardbus_io_size, 0 /* dont care */); + b_res[1].start = pci_cardbus_io_size; + b_res[1].end = b_res[1].start + pci_cardbus_io_size - 1; + b_res[1].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN; + if (realloc_head) { + b_res[1].end -= pci_cardbus_io_size; + add_to_list(realloc_head, bridge, b_res+1, pci_cardbus_io_size, + pci_cardbus_io_size); + } /* MEM1 must not be pref mmio */ pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl); @@ -939,28 +948,28 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, * twice the size. */ if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0) { - b_res[2].start = 0; - b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH | IORESOURCE_SIZEALIGN; - if (realloc_head) - add_to_list(realloc_head, bridge, b_res+2, pci_cardbus_mem_size, 0 /* dont care */); - - b_res[3].start = 0; - b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_SIZEALIGN; - if (realloc_head) - add_to_list(realloc_head, bridge, b_res+3, pci_cardbus_mem_size, 0 /* dont care */); - } else { - b_res[3].start = 0; - b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_SIZEALIGN; - if (realloc_head) - add_to_list(realloc_head, bridge, b_res+3, pci_cardbus_mem_size * 2, 0 /* dont care */); + b_res[2].start = pci_cardbus_mem_size; + b_res[2].end = b_res[2].start + pci_cardbus_mem_size - 1; + b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH | + IORESOURCE_STARTALIGN; + if (realloc_head) { + b_res[2].end -= pci_cardbus_mem_size; + add_to_list(realloc_head, bridge, b_res+2, + pci_cardbus_mem_size, pci_cardbus_mem_size); + } + + /* reduce that to half */ + b_res_3_size = pci_cardbus_mem_size; } - /* set the size of the resource to zero, so that the resource does not - * get assigned during required-resource allocation cycle but gets assigned - * during the optional-resource allocation cycle. - */ - b_res[0].start = b_res[1].start = b_res[2].start = b_res[3].start = 1; - b_res[0].end = b_res[1].end = b_res[2].end = b_res[3].end = 0; + b_res[3].start = pci_cardbus_mem_size; + b_res[3].end = b_res[3].start + b_res_3_size - 1; + b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_STARTALIGN; + if (realloc_head) { + b_res[3].end -= b_res_3_size; + add_to_list(realloc_head, bridge, b_res+3, b_res_3_size, + pci_cardbus_mem_size); + } } void __ref __pci_bus_size_bridges(struct pci_bus *bus, -- cgit v1.2.3-58-ga151 From 3796f1e2ca38deebd30aa755ea52562b6926c73e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 10 Feb 2012 15:33:48 -0800 Subject: PCI: Skip cardbus assigned resource reset during pci bus rescan Otherwise when rescan is used for cardbus, assigned resources will get cleared. Signed-off-by: Yinghai Lu Tested-by: Dominik Brodowski Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 3b3932a6465f..2991a8975064 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -901,6 +901,8 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, resource_size_t b_res_3_size = pci_cardbus_mem_size * 2; u16 ctrl; + if (b_res[0].parent) + goto handle_b_res_1; /* * Reserve some resources for CardBus. We reserve * a fixed amount of bus space for CardBus bridges. @@ -914,6 +916,9 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, pci_cardbus_io_size); } +handle_b_res_1: + if (b_res[1].parent) + goto handle_b_res_2; b_res[1].start = pci_cardbus_io_size; b_res[1].end = b_res[1].start + pci_cardbus_io_size - 1; b_res[1].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN; @@ -923,6 +928,7 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, pci_cardbus_io_size); } +handle_b_res_2: /* MEM1 must not be pref mmio */ pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl); if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM1) { @@ -942,6 +948,8 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl); } + if (b_res[2].parent) + goto handle_b_res_3; /* * If we have prefetchable memory support, allocate * two regions. Otherwise, allocate one region of @@ -962,6 +970,9 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, b_res_3_size = pci_cardbus_mem_size; } +handle_b_res_3: + if (b_res[3].parent) + goto handle_done; b_res[3].start = pci_cardbus_mem_size; b_res[3].end = b_res[3].start + b_res_3_size - 1; b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_STARTALIGN; @@ -970,6 +981,9 @@ static void pci_bus_size_cardbus(struct pci_bus *bus, add_to_list(realloc_head, bridge, b_res+3, b_res_3_size, pci_cardbus_mem_size); } + +handle_done: + ; } void __ref __pci_bus_size_bridges(struct pci_bus *bus, -- cgit v1.2.3-58-ga151 From 2dd8ba921d570fcd016f8038c63fa9668892d16b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 19 Feb 2012 14:50:12 -0800 Subject: PCI: Fix device class print out Found debug print of class is shifted. | pci 0000:f8:15.2: [8086:2b56] type 0 class 0x000600 Code is trying to print class with 6 digits, but use shifted class with 4 digits valid value as variable. Change to original dev->class directly. Also remove not needed calculating of local variable class, because it will be updated after pci_fixup_device(pci_fixup_early...) Also unify type print out when class and header is not matched. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 9f2ff8c5dc2f..aa9b1dec0d3e 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -926,12 +926,10 @@ int pci_setup_device(struct pci_dev *dev) pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); dev->revision = class & 0xff; - class >>= 8; /* upper 3 bytes */ - dev->class = class; - class >>= 8; + dev->class = class >> 8; /* upper 3 bytes */ - dev_printk(KERN_DEBUG, &dev->dev, "[%04x:%04x] type %d class %#08x\n", - dev->vendor, dev->device, dev->hdr_type, class); + dev_printk(KERN_DEBUG, &dev->dev, "[%04x:%04x] type %02x class %#08x\n", + dev->vendor, dev->device, dev->hdr_type, dev->class); /* need to have dev->class ready */ dev->cfg_size = pci_cfg_space_size(dev); @@ -1013,8 +1011,8 @@ int pci_setup_device(struct pci_dev *dev) return -EIO; bad: - dev_err(&dev->dev, "ignoring class %02x (doesn't match header " - "type %02x)\n", class, dev->hdr_type); + dev_err(&dev->dev, "ignoring class %#08x (doesn't match header " + "type %02x)\n", dev->class, dev->hdr_type); dev->class = PCI_CLASS_NOT_DEFINED; } -- cgit v1.2.3-58-ga151 From f796841e49fe086176e27ed0e1f3f7a1123a4a6b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 11 Feb 2012 00:18:30 -0800 Subject: PCI: fix memleak for pci dev removing during hotplug unreferenced object 0xffff880276d17700 (size 64): comm "swapper/0", pid 1, jiffies 4294897182 (age 3976.028s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 18 f9 de 76 02 88 ff ff ...........v.... 10 00 00 00 0e 00 00 00 0f 28 40 00 00 00 00 00 .........(@..... backtrace: [] kmemleak_alloc+0x26/0x43 [] __kmalloc+0x121/0x183 [] pci_add_cap_save_buffer+0x35/0x7c [] pci_allocate_cap_save_buffers+0x1d/0x65 [] pci_device_add+0x92/0xf1 [] pci_scan_single_device+0x9f/0xa1 [] pci_scan_slot.part.20+0x21/0x106 [] pci_scan_slot+0x2b/0x35 [] __pci_scan_child_bus+0x51/0x107 [] pci_scan_bridge+0x376/0x6ae [] __pci_scan_child_bus+0xcd/0x107 [] pci_scan_child_bus+0x11/0x2a [] pci_acpi_scan_root+0x18b/0x21c [] acpi_pci_root_add+0x1e1/0x42a [] acpi_device_probe+0x50/0x190 [] really_probe+0x99/0x126 Need to free saved_buffer for capabilities. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 9 +++++++++ drivers/pci/pci.h | 1 + drivers/pci/probe.c | 1 + 3 files changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 9c89447e7b21..e7dfcd447571 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1916,6 +1916,15 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) "unable to preallocate PCI-X save buffer\n"); } +void pci_free_cap_save_buffers(struct pci_dev *dev) +{ + struct pci_cap_saved_state *tmp; + struct hlist_node *pos, *n; + + hlist_for_each_entry_safe(tmp, pos, n, &dev->saved_cap_space, next) + kfree(tmp); +} + /** * pci_enable_ari - enable ARI forwarding if hardware support it * @dev: the PCI device diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index aaf7ff8c517f..586ac9b097e4 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -73,6 +73,7 @@ extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); +void pci_free_cap_save_buffers(struct pci_dev *dev); static inline void pci_wakeup_event(struct pci_dev *dev) { diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index aa9b1dec0d3e..dc904bd4b569 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1024,6 +1024,7 @@ static void pci_release_capabilities(struct pci_dev *dev) { pci_vpd_release(dev); pci_iov_release(dev); + pci_free_cap_save_buffers(dev); } /** -- cgit v1.2.3-58-ga151 From 34a4876e3071ddebf3c98c99ba01c14b059a1361 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 11 Feb 2012 00:18:41 -0800 Subject: PCI: move pci_find_saved_cap out of linux/pci.h Only one user in driver/pci/pci.c, so we don't need to put it in global pci.h Reviewed-by: Bjorn Helgaas Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 19 +++++++++++++++++++ include/linux/pci.h | 19 ------------------- 2 files changed, 19 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e7dfcd447571..8f30736dbf3f 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -825,6 +825,19 @@ EXPORT_SYMBOL(pci_choose_state); #define pcie_cap_has_sltctl2(type, flags) \ ((flags & PCI_EXP_FLAGS_VERS) > 1) +static struct pci_cap_saved_state *pci_find_saved_cap( + struct pci_dev *pci_dev, char cap) +{ + struct pci_cap_saved_state *tmp; + struct hlist_node *pos; + + hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) { + if (tmp->cap.cap_nr == cap) + return tmp; + } + return NULL; +} + static int pci_save_pcie_state(struct pci_dev *dev) { int pos, i = 0; @@ -1869,6 +1882,12 @@ void platform_pci_wakeup_init(struct pci_dev *dev) platform_pci_sleep_wake(dev, false); } +static void pci_add_saved_cap(struct pci_dev *pci_dev, + struct pci_cap_saved_state *new_cap) +{ + hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); +} + /** * pci_add_save_buffer - allocate buffer for saving given capability registers * @dev: the PCI device diff --git a/include/linux/pci.h b/include/linux/pci.h index f8caaab4b3fc..bcaa51ca7858 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -368,25 +368,6 @@ static inline int pci_channel_offline(struct pci_dev *pdev) return (pdev->error_state != pci_channel_io_normal); } -static inline struct pci_cap_saved_state *pci_find_saved_cap( - struct pci_dev *pci_dev, char cap) -{ - struct pci_cap_saved_state *tmp; - struct hlist_node *pos; - - hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) { - if (tmp->cap.cap_nr == cap) - return tmp; - } - return NULL; -} - -static inline void pci_add_saved_cap(struct pci_dev *pci_dev, - struct pci_cap_saved_state *new_cap) -{ - hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); -} - /* * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond * to P2P or CardBus bridge windows) go in a table. Additional ones (for -- cgit v1.2.3-58-ga151 From 7570a333d8b00e7fd4b05d898e353000a70210ce Mon Sep 17 00:00:00 2001 From: MUNEDA Takahiro Date: Thu, 2 Feb 2012 11:09:22 -0500 Subject: PCI: Add pcie_hp=nomsi to disable MSI/MSI-X for pciehp driver Add a parameter to avoid using MSI/MSI-X for PCIe native hotplug; it's known to be buggy on some platforms. In my environment, while shutting down, following stack trace is shown sometimes. irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 1081, comm: reboot Not tainted 3.2.0 #1 Call Trace: [] __report_bad_irq+0x3d/0xe0 [] note_interrupt+0x15c/0x210 [] handle_irq_event_percpu+0xb5/0x210 [] handle_irq_event+0x41/0x70 [] handle_fasteoi_irq+0x55/0xc0 [] handle_irq+0x46/0xb0 [] do_IRQ+0x5d/0xe0 [] common_interrupt+0x6e/0x6e [] ? __do_softirq+0x60/0x210 [] ? hrtimer_interrupt+0x151/0x240 [] call_softirq+0x1c/0x30 [] do_softirq+0x65/0xa0 [] irq_exit+0xbd/0xe0 [] smp_apic_timer_interrupt+0x6e/0x99 [] apic_timer_interrupt+0x6e/0x80 [] ? _raw_spin_unlock_irqrestore+0x11/0x20 [] pci_bus_write_config_word+0x6c/0x80 [] pci_intx+0x52/0xa0 [] pci_intx_for_msi+0x1d/0x30 [] pci_msi_shutdown+0x7b/0x110 [] pci_device_shutdown+0x34/0x50 [] device_shutdown+0x2f/0x140 [] kernel_restart_prepare+0x31/0x40 [] kernel_restart+0x16/0x60 [] sys_reboot+0x1ad/0x220 [] ? do_page_fault+0x1e0/0x460 [] ? __sync_filesystem+0x90/0x90 [] ? __cond_resched+0x2a/0x40 [] ? _cond_resched+0x30/0x40 [] ? iterate_supers+0xb7/0xd0 [] system_call_fastpath+0x16/0x1b handlers: [] usb_hcd_irq [] usb_hcd_irq [] usb_hcd_irq Disabling IRQ #16 An un-wanted interrupt is generated when PCI driver switches from MSI/MSI-X to INTx while shutting down the device. The interrupt does not happen if MSI/MSI-X is not used on the device. I confirmed that this problem does not happen if pcie_hp=nomsi was specified and hotplug operation worked fine as usual. v2: Automatically disable MSI/MSI-X against following device: PCI bridge: Integrated Device Technology, Inc. Device 807f (rev 02) v3: Based on the review comment, combile the if statements. v4: Removed module parameter. Move some code to build pciehp as a module. Move device specific code to driver/pci/quirks.c. v5: Drop a device specific code until getting a vendor statement. Reviewed-by: Kenji Kaneshige Signed-off-by: MUNEDA Takahiro Signed-off-by: Jesse Barnes --- Documentation/kernel-parameters.txt | 4 ++++ drivers/pci/pcie/portdrv.h | 12 ++++++++++++ drivers/pci/pcie/portdrv_core.c | 16 ++++++++++++++-- 3 files changed, 30 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 033d4e69b43b..7fb7a4b161ff 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2118,6 +2118,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. force Enable ASPM even on devices that claim not to support it. WARNING: Forcing ASPM on may cause system lockups. + pcie_hp= [PCIE] PCI Express Hotplug driver options: + nomsi Do not use MSI for PCI Express Native Hotplug (this + makes all PCIe ports use INTx for hotplug services). + pcie_ports= [PCIE] PCIe ports handling: auto Ask the BIOS whether or not to use native PCIe services associated with PCIe ports (PME, hot-plug, AER). Use diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index bd00a01aef14..eea2ca2375e6 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -34,6 +34,18 @@ struct pci_dev; extern void pcie_clear_root_pme_status(struct pci_dev *dev); +#ifdef CONFIG_HOTPLUG_PCI_PCIE +extern bool pciehp_msi_disabled; + +static inline bool pciehp_no_msi(void) +{ + return pciehp_msi_disabled; +} + +#else /* !CONFIG_HOTPLUG_PCI_PCIE */ +static inline bool pciehp_no_msi(void) { return false; } +#endif /* !CONFIG_HOTPLUG_PCI_PCIE */ + #ifdef CONFIG_PCIE_PME extern bool pcie_pme_msi_disabled; diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 595654a1a6a6..2f589a54f9bd 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -19,6 +19,17 @@ #include "../pci.h" #include "portdrv.h" +bool pciehp_msi_disabled; + +static int __init pciehp_setup(char *str) +{ + if (!strncmp(str, "nomsi", 5)) + pciehp_msi_disabled = true; + + return 1; +} +__setup("pcie_hp=", pciehp_setup); + /** * release_pcie_device - free PCI Express port service device structure * @dev: Port service device to release @@ -189,8 +200,9 @@ static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask) { int i, irq = -1; - /* We have to use INTx if MSI cannot be used for PCIe PME. */ - if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) { + /* We have to use INTx if MSI cannot be used for PCIe PME or pciehp. */ + if (((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) || + ((mask & PCIE_PORT_SERVICE_HP) && pciehp_no_msi())) { if (dev->pin) irq = dev->irq; goto no_msi; -- cgit v1.2.3-58-ga151 From 47087700ce3ccb2bf69f4dcb6ad7f59764e51308 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 14:29:23 -0700 Subject: PCI: make pci_flags always available If we move resource assignment functions into the core, we'll still need a way for architectures to prevent reassignment, e.g., the "pci_probe_only" functionality, and we'll need a generic, always available way the core can test for that. The "pci_flags" arrangement used by several architectures seems like a convenient way to do this. Signed-off-by: Bjorn Helgaas --- drivers/pci/setup-bus.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 2991a8975064..6db307fa20f5 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -25,8 +25,11 @@ #include #include #include +#include #include "pci.h" +unsigned int __weak pci_flags; + struct pci_dev_resource { struct list_head list; struct resource *res; -- cgit v1.2.3-58-ga151 From 844393f4c5e309dd262b27796471c47e348b57a8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:18:59 -0700 Subject: PCI: make pci_flags non-weak No architecture defines its own pci_flags, so the core symbol does not need to be weak. Signed-off-by: Bjorn Helgaas --- drivers/pci/setup-bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 6db307fa20f5..e241f2fd6cbf 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -28,7 +28,7 @@ #include #include "pci.h" -unsigned int __weak pci_flags; +unsigned int pci_flags; struct pci_dev_resource { struct list_head list; -- cgit v1.2.3-58-ga151 From a5390aa6dc3646b08bed421944cef0daf78ab994 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:18:59 -0700 Subject: PCI: don't publish new root bus until it's fully initialized When pci_create_root_bus() adds the new struct pci_bus to the global pci_root_buses list, the bus becomes visible to other parts of the kernel, so it should be fully initialized. This patch delays adding the bus to the pci_root_buses list until after all the struct pci_bus initialization is finished. Signed-off-by: Bjorn Helgaas --- drivers/pci/probe.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index dc904bd4b569..e4c0d1c6324d 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1569,10 +1569,6 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, goto err_out; } - down_write(&pci_bus_sem); - list_add_tail(&b->node, &pci_root_buses); - up_write(&pci_bus_sem); - dev->parent = parent; dev->release = pci_release_bus_bridge_dev; dev_set_name(dev, "pci%04x:%02x", pci_domain_nr(b), bus); @@ -1612,6 +1608,10 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, dev_info(&b->dev, "root bus resource %pR\n", res); } + down_write(&pci_bus_sem); + list_add_tail(&b->node, &pci_root_buses); + up_write(&pci_bus_sem); + return b; class_dev_reg_err: -- cgit v1.2.3-58-ga151 From 5a21d70dbd33d20713fb735ad9381711b0ae2c9b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:18:59 -0700 Subject: PCI: add struct pci_host_bridge and a list of all bridges found This adds a list of all PCI host bridges we find and a way to look up the host bridge from a pci_dev. Signed-off-by: Bjorn Helgaas --- drivers/pci/probe.c | 39 ++++++++++++++++++++++++++++++++++----- include/linux/pci.h | 5 +++++ 2 files changed, 39 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e4c0d1c6324d..3a30023a123c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -15,6 +15,8 @@ #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */ #define CARDBUS_RESERVE_BUSNR 3 +static LIST_HEAD(pci_host_bridges); + /* Ugh. Need to stop exporting this to modules. */ LIST_HEAD(pci_root_buses); EXPORT_SYMBOL(pci_root_buses); @@ -42,6 +44,23 @@ int no_pci_devices(void) } EXPORT_SYMBOL(no_pci_devices); +static struct pci_host_bridge *pci_host_bridge(struct pci_dev *dev) +{ + struct pci_bus *bus; + struct pci_host_bridge *bridge; + + bus = dev->bus; + while (bus->parent) + bus = bus->parent; + + list_for_each_entry(bridge, &pci_host_bridges, list) { + if (bridge->bus == bus) + return bridge; + } + + return NULL; +} + /* * PCI Bus Class */ @@ -1544,20 +1563,23 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources) { int error, i; + struct pci_host_bridge *bridge; struct pci_bus *b, *b2; struct device *dev; struct pci_bus_resource *bus_res, *n; struct resource *res; + bridge = kzalloc(sizeof(*bridge), GFP_KERNEL); + if (!bridge) + return NULL; + b = pci_alloc_bus(); if (!b) - return NULL; + goto err_bus; dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - kfree(b); - return NULL; - } + if (!dev) + goto err_dev; b->sysdata = sysdata; b->ops = ops; @@ -1594,6 +1616,8 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, b->number = b->secondary = bus; + bridge->bus = b; + /* Add initial resources to the bus */ list_for_each_entry_safe(bus_res, n, resources, list) list_move_tail(&bus_res->list, &b->resources); @@ -1609,6 +1633,7 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, } down_write(&pci_bus_sem); + list_add_tail(&bridge->list, &pci_host_bridges); list_add_tail(&b->node, &pci_root_buses); up_write(&pci_bus_sem); @@ -1618,11 +1643,15 @@ class_dev_reg_err: device_unregister(dev); dev_reg_err: down_write(&pci_bus_sem); + list_del(&bridge->list); list_del(&b->node); up_write(&pci_bus_sem); err_out: kfree(dev); +err_dev: kfree(b); +err_bus: + kfree(bridge); return NULL; } diff --git a/include/linux/pci.h b/include/linux/pci.h index bcaa51ca7858..2c946b3bbf77 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -368,6 +368,11 @@ static inline int pci_channel_offline(struct pci_dev *pdev) return (pdev->error_state != pci_channel_io_normal); } +struct pci_host_bridge { + struct list_head list; + struct pci_bus *bus; /* root bus */ +}; + /* * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond * to P2P or CardBus bridge windows) go in a table. Additional ones (for -- cgit v1.2.3-58-ga151 From 0efd5aab41e18a1175f72641696cfda154ba6c87 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:19:00 -0700 Subject: PCI: add struct pci_host_bridge_window with CPU/bus address offset Some PCI host bridges apply an address offset, so bus addresses on PCI are different from CPU addresses. This patch adds a way for architectures to tell the PCI core about this offset. For example: LIST_HEAD(resources); pci_add_resource_offset(&resources, host->io_space, host->io_offset); pci_add_resource_offset(&resources, host->mem_space, host->mem_offset); pci_scan_root_bus(parent, bus, ops, sysdata, &resources); Signed-off-by: Bjorn Helgaas --- drivers/pci/bus.c | 30 +++++++++++++++++++----------- drivers/pci/probe.c | 32 +++++++++++++++++++++++--------- include/linux/pci.h | 9 +++++++++ 3 files changed, 51 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 398f5d859791..4ce5ef2f2826 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -18,28 +18,36 @@ #include "pci.h" -void pci_add_resource(struct list_head *resources, struct resource *res) +void pci_add_resource_offset(struct list_head *resources, struct resource *res, + resource_size_t offset) { - struct pci_bus_resource *bus_res; + struct pci_host_bridge_window *window; - bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL); - if (!bus_res) { - printk(KERN_ERR "PCI: can't add bus resource %pR\n", res); + window = kzalloc(sizeof(struct pci_host_bridge_window), GFP_KERNEL); + if (!window) { + printk(KERN_ERR "PCI: can't add host bridge window %pR\n", res); return; } - bus_res->res = res; - list_add_tail(&bus_res->list, resources); + window->res = res; + window->offset = offset; + list_add_tail(&window->list, resources); +} +EXPORT_SYMBOL(pci_add_resource_offset); + +void pci_add_resource(struct list_head *resources, struct resource *res) +{ + pci_add_resource_offset(resources, res, 0); } EXPORT_SYMBOL(pci_add_resource); void pci_free_resource_list(struct list_head *resources) { - struct pci_bus_resource *bus_res, *tmp; + struct pci_host_bridge_window *window, *tmp; - list_for_each_entry_safe(bus_res, tmp, resources, list) { - list_del(&bus_res->list); - kfree(bus_res); + list_for_each_entry_safe(window, tmp, resources, list) { + list_del(&window->list); + kfree(window); } } EXPORT_SYMBOL(pci_free_resource_list); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 3a30023a123c..3f07cb6bae32 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1562,12 +1562,15 @@ unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus) struct pci_bus *pci_create_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources) { - int error, i; + int error; struct pci_host_bridge *bridge; struct pci_bus *b, *b2; struct device *dev; - struct pci_bus_resource *bus_res, *n; + struct pci_host_bridge_window *window, *n; struct resource *res; + resource_size_t offset; + char bus_addr[64]; + char *fmt; bridge = kzalloc(sizeof(*bridge), GFP_KERNEL); if (!bridge) @@ -1617,19 +1620,30 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, b->number = b->secondary = bus; bridge->bus = b; - - /* Add initial resources to the bus */ - list_for_each_entry_safe(bus_res, n, resources, list) - list_move_tail(&bus_res->list, &b->resources); + INIT_LIST_HEAD(&bridge->windows); if (parent) dev_info(parent, "PCI host bridge to bus %s\n", dev_name(&b->dev)); else printk(KERN_INFO "PCI host bridge to bus %s\n", dev_name(&b->dev)); - pci_bus_for_each_resource(b, res, i) { - if (res) - dev_info(&b->dev, "root bus resource %pR\n", res); + /* Add initial resources to the bus */ + list_for_each_entry_safe(window, n, resources, list) { + list_move_tail(&window->list, &bridge->windows); + res = window->res; + offset = window->offset; + pci_bus_add_resource(b, res, 0); + if (offset) { + if (resource_type(res) == IORESOURCE_IO) + fmt = " (bus address [%#06llx-%#06llx])"; + else + fmt = " (bus address [%#010llx-%#010llx])"; + snprintf(bus_addr, sizeof(bus_addr), fmt, + (unsigned long long) (res->start - offset), + (unsigned long long) (res->end - offset)); + } else + bus_addr[0] = '\0'; + dev_info(&b->dev, "root bus resource %pR%s\n", res, bus_addr); } down_write(&pci_bus_sem); diff --git a/include/linux/pci.h b/include/linux/pci.h index 2c946b3bbf77..419f78f96375 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -368,9 +368,16 @@ static inline int pci_channel_offline(struct pci_dev *pdev) return (pdev->error_state != pci_channel_io_normal); } +struct pci_host_bridge_window { + struct list_head list; + struct resource *res; /* host bridge aperture (CPU address) */ + resource_size_t offset; /* bus address + offset = CPU address */ +}; + struct pci_host_bridge { struct list_head list; struct pci_bus *bus; /* root bus */ + struct list_head windows; /* pci_host_bridge_windows */ }; /* @@ -901,6 +908,8 @@ void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ void pci_add_resource(struct list_head *resources, struct resource *res); +void pci_add_resource_offset(struct list_head *resources, struct resource *res, + resource_size_t offset); void pci_free_resource_list(struct list_head *resources); void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags); struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n); -- cgit v1.2.3-58-ga151 From 5bfa14ed9f3ca21fcecbcfbf4a848c002b740c41 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:19:00 -0700 Subject: PCI: convert bus addresses to resource when reading BARs Some PCI host bridges translate CPU addresses to PCI bus addresses. Previously, we initialized pci_dev resources with PCI bus addresses, then converted them to CPU addresses later in arch-specific code (pcibios_fixup_resources()), which leaves a window of time where the pci_dev resources are incorrect. This patch adds support in the core for this address translation. When the arch creates the root bus, it can supply the host bridge address translation information, and the core can use it to set the pci_dev resources correctly from the beginning. This gives us a way to fix the problem that quirks that run between device discovery and pcibios_fixup_resources() fail because they use pci_dev resources that haven't been converted. The reference below is to one such problem that affected ARM and ia64. Note that this patch has no effect until an arch starts using pci_add_resource_offset() with a non-zero offset: before that, all all host bridge windows have a zero offset and pci_bus_to_resource() copies the pci_bus_region directly to the struct resource. Reference: https://lkml.org/lkml/2009/10/12/405 Signed-off-by: Bjorn Helgaas --- drivers/pci/probe.c | 129 ++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 104 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 3f07cb6bae32..3539171d8a98 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -61,6 +61,63 @@ static struct pci_host_bridge *pci_host_bridge(struct pci_dev *dev) return NULL; } +static bool resource_contains(struct resource *res1, struct resource *res2) +{ + return res1->start <= res2->start && res1->end >= res2->end; +} + +void pci_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_host_bridge *bridge = pci_host_bridge(dev); + struct pci_host_bridge_window *window; + resource_size_t offset = 0; + + list_for_each_entry(window, &bridge->windows, list) { + if (resource_type(res) != resource_type(window->res)) + continue; + + if (resource_contains(window->res, res)) { + offset = window->offset; + break; + } + } + + region->start = res->start - offset; + region->end = res->end - offset; +} + +static bool region_contains(struct pci_bus_region *region1, + struct pci_bus_region *region2) +{ + return region1->start <= region2->start && region1->end >= region2->end; +} + +void pci_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_host_bridge *bridge = pci_host_bridge(dev); + struct pci_host_bridge_window *window; + struct pci_bus_region bus_region; + resource_size_t offset = 0; + + list_for_each_entry(window, &bridge->windows, list) { + if (resource_type(res) != resource_type(window->res)) + continue; + + bus_region.start = window->res->start - window->offset; + bus_region.end = window->res->end - window->offset; + + if (region_contains(&bus_region, region)) { + offset = window->offset; + break; + } + } + + res->start = region->start + offset; + res->end = region->end + offset; +} + /* * PCI Bus Class */ @@ -154,6 +211,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, { u32 l, sz, mask; u16 orig_cmd; + struct pci_bus_region region; mask = type ? PCI_ROM_ADDRESS_MASK : ~0; @@ -233,11 +291,13 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, /* Address above 32-bit boundary; disable the BAR */ pci_write_config_dword(dev, pos, 0); pci_write_config_dword(dev, pos + 4, 0); - res->start = 0; - res->end = sz64; + region.start = 0; + region.end = sz64; + pci_bus_to_resource(dev, res, ®ion); } else { - res->start = l64; - res->end = l64 + sz64; + region.start = l64; + region.end = l64 + sz64; + pci_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } @@ -247,8 +307,9 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, if (!sz) goto fail; - res->start = l; - res->end = l + sz; + region.start = l; + region.end = l + sz; + pci_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } @@ -285,7 +346,8 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child) struct pci_dev *dev = child->self; u8 io_base_lo, io_limit_lo; unsigned long base, limit; - struct resource *res; + struct pci_bus_region region; + struct resource *res, res2; res = child->resource[0]; pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); @@ -303,10 +365,13 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child) if (base && base <= limit) { res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; + region.start = base; + region.end = limit + 0xfff; + pci_bus_to_resource(dev, &res2, ®ion); if (!res->start) - res->start = base; + res->start = res2.start; if (!res->end) - res->end = limit + 0xfff; + res->end = res2.end; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } } @@ -316,6 +381,7 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child) struct pci_dev *dev = child->self; u16 mem_base_lo, mem_limit_lo; unsigned long base, limit; + struct pci_bus_region region; struct resource *res; res = child->resource[1]; @@ -325,8 +391,9 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child) limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; if (base && base <= limit) { res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; - res->start = base; - res->end = limit + 0xfffff; + region.start = base; + region.end = limit + 0xfffff; + pci_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } } @@ -336,6 +403,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) struct pci_dev *dev = child->self; u16 mem_base_lo, mem_limit_lo; unsigned long base, limit; + struct pci_bus_region region; struct resource *res; res = child->resource[2]; @@ -372,8 +440,9 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) IORESOURCE_MEM | IORESOURCE_PREFETCH; if (res->flags & PCI_PREF_RANGE_TYPE_64) res->flags |= IORESOURCE_MEM_64; - res->start = base; - res->end = limit + 0xfffff; + region.start = base; + region.end = limit + 0xfffff; + pci_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } } @@ -919,6 +988,8 @@ int pci_setup_device(struct pci_dev *dev) u8 hdr_type; struct pci_slot *slot; int pos = 0; + struct pci_bus_region region; + struct resource *res; if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type)) return -EIO; @@ -980,20 +1051,28 @@ int pci_setup_device(struct pci_dev *dev) u8 progif; pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); if ((progif & 1) == 0) { - dev->resource[0].start = 0x1F0; - dev->resource[0].end = 0x1F7; - dev->resource[0].flags = LEGACY_IO_RESOURCE; - dev->resource[1].start = 0x3F6; - dev->resource[1].end = 0x3F6; - dev->resource[1].flags = LEGACY_IO_RESOURCE; + region.start = 0x1F0; + region.end = 0x1F7; + res = &dev->resource[0]; + res->flags = LEGACY_IO_RESOURCE; + pci_bus_to_resource(dev, res, ®ion); + region.start = 0x3F6; + region.end = 0x3F6; + res = &dev->resource[1]; + res->flags = LEGACY_IO_RESOURCE; + pci_bus_to_resource(dev, res, ®ion); } if ((progif & 4) == 0) { - dev->resource[2].start = 0x170; - dev->resource[2].end = 0x177; - dev->resource[2].flags = LEGACY_IO_RESOURCE; - dev->resource[3].start = 0x376; - dev->resource[3].end = 0x376; - dev->resource[3].flags = LEGACY_IO_RESOURCE; + region.start = 0x170; + region.end = 0x177; + res = &dev->resource[2]; + res->flags = LEGACY_IO_RESOURCE; + pci_bus_to_resource(dev, res, ®ion); + region.start = 0x376; + region.end = 0x376; + res = &dev->resource[3]; + res->flags = LEGACY_IO_RESOURCE; + pci_bus_to_resource(dev, res, ®ion); } } break; -- cgit v1.2.3-58-ga151 From 36a66cd6fd0a70ac6848d740d9cf7a4360b5776a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:19:00 -0700 Subject: PCI: add generic pcibios_resource_to_bus() This replaces the generic versions of pcibios_resource_to_bus() and pcibios_bus_to_resource() in asm-generic/pci.h with versions that use pci_resource_to_bus() and pci_bus_to_resource(). The replacements are equivalent except that they can apply host bridge window offsets when the arch has supplied them by using pci_add_resource_offset(). Each arch can convert to using pci_add_resource_offset() individually by removing its device resource fixups from pcibios_fixup_bus() and supplying ARCH_HAS_GENERIC_PCI_OFFSETS. ARCH_HAS_GENERIC_PCI_OFFSETS can be removed after all have converted. Signed-off-by: Bjorn Helgaas --- drivers/pci/probe.c | 16 ++++++++++++++++ include/asm-generic/pci.h | 24 +----------------------- include/linux/pci.h | 4 ++++ 3 files changed, 21 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 3539171d8a98..a677b1e995de 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -118,6 +118,22 @@ void pci_bus_to_resource(struct pci_dev *dev, struct resource *res, res->end = region->end + offset; } +#ifdef ARCH_HAS_GENERIC_PCI_OFFSETS +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + pci_resource_to_bus(dev, region, res); +} +EXPORT_SYMBOL(pcibios_resource_to_bus); + +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + pci_bus_to_resource(dev, res, region); +} +EXPORT_SYMBOL(pcibios_bus_to_resource); +#endif + /* * PCI Bus Class */ diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h index 26373cff4546..0410346e2cf6 100644 --- a/include/asm-generic/pci.h +++ b/include/asm-generic/pci.h @@ -6,29 +6,7 @@ #ifndef _ASM_GENERIC_PCI_H #define _ASM_GENERIC_PCI_H -/** - * pcibios_resource_to_bus - convert resource to PCI bus address - * @dev: device which owns this resource - * @region: converted bus-centric region (start,end) - * @res: resource to convert - * - * Convert a resource to a PCI device bus address or bus window. - */ -static inline void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - region->start = res->start; - region->end = res->end; -} - -static inline void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - res->start = region->start; - res->end = region->end; -} +#define ARCH_HAS_GENERIC_PCI_OFFSETS static inline struct resource * pcibios_select_root(struct pci_dev *pdev, struct resource *res) diff --git a/include/linux/pci.h b/include/linux/pci.h index 419f78f96375..be58a51706cc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -648,6 +648,10 @@ void pci_fixup_cardbus(struct pci_bus *); /* Generic PCI functions used internally */ +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res); +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); void pcibios_scan_specific_bus(int busn); extern struct pci_bus *pci_find_bus(int domain, int busnr); void pci_bus_add_devices(const struct pci_bus *bus); -- cgit v1.2.3-58-ga151 From 39c2462e163448c7df466c7262109ec6a24d5f88 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:19:03 -0700 Subject: parisc/PCI: get rid of device resource fixups Tell the PCI core about host bridge address translation so it can take care of bus-to-resource conversion for us. CC: linux-parisc@vger.kernel.org Signed-off-by: Bjorn Helgaas --- arch/parisc/include/asm/pci.h | 38 +------------------------------ arch/parisc/kernel/pci.c | 52 ------------------------------------------- drivers/parisc/dino.c | 27 +++++----------------- drivers/parisc/lba_pci.c | 31 +++++--------------------- 4 files changed, 13 insertions(+), 135 deletions(-) (limited to 'drivers') diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h index 2242a5c636c2..a8b591fdd564 100644 --- a/arch/parisc/include/asm/pci.h +++ b/arch/parisc/include/asm/pci.h @@ -82,38 +82,8 @@ struct pci_hba_data { #ifdef CONFIG_64BIT #define PCI_F_EXTEND 0xffffffff00000000UL -#define PCI_IS_LMMIO(hba,a) pci_is_lmmio(hba,a) - -/* We need to know if an address is LMMMIO or GMMIO. - * LMMIO requires mangling and GMMIO we must use as-is. - */ -static __inline__ int pci_is_lmmio(struct pci_hba_data *hba, unsigned long a) -{ - return(((a) & PCI_F_EXTEND) == PCI_F_EXTEND); -} - -/* -** Convert between PCI (IO_VIEW) addresses and processor (PA_VIEW) addresses. -** See pci.c for more conversions used by Generic PCI code. -** -** Platform characteristics/firmware guarantee that -** (1) PA_VIEW - IO_VIEW = lmmio_offset for both LMMIO and ELMMIO -** (2) PA_VIEW == IO_VIEW for GMMIO -*/ -#define PCI_BUS_ADDR(hba,a) (PCI_IS_LMMIO(hba,a) \ - ? ((a) - hba->lmmio_space_offset) /* mangle LMMIO */ \ - : (a)) /* GMMIO */ -#define PCI_HOST_ADDR(hba,a) (((a) & PCI_F_EXTEND) == 0 \ - ? (a) + hba->lmmio_space_offset \ - : (a)) - #else /* !CONFIG_64BIT */ - -#define PCI_BUS_ADDR(hba,a) (a) -#define PCI_HOST_ADDR(hba,a) (a) #define PCI_F_EXTEND 0UL -#define PCI_IS_LMMIO(hba,a) (1) /* 32-bit doesn't support GMMIO */ - #endif /* !CONFIG_64BIT */ /* @@ -245,13 +215,7 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, } #endif -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res); - -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); +#define ARCH_HAS_GENERIC_PCI_OFFSETS static inline void pcibios_penalize_isa_irq(int irq, int active) { diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 9efd97405317..74d544b1cd22 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -195,58 +195,6 @@ void __init pcibios_init_bus(struct pci_bus *bus) pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl); } -/* called by drivers/pci/setup-bus.c:pci_setup_bridge(). */ -void __devinit pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, struct resource *res) -{ -#ifdef CONFIG_64BIT - struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data); -#endif - - if (res->flags & IORESOURCE_IO) { - /* - ** I/O space may see busnumbers here. Something - ** in the form of 0xbbxxxx where bb is the bus num - ** and xxxx is the I/O port space address. - ** Remaining address translation are done in the - ** PCI Host adapter specific code - ie dino_out8. - */ - region->start = PCI_PORT_ADDR(res->start); - region->end = PCI_PORT_ADDR(res->end); - } else if (res->flags & IORESOURCE_MEM) { - /* Convert MMIO addr to PCI addr (undo global virtualization) */ - region->start = PCI_BUS_ADDR(hba, res->start); - region->end = PCI_BUS_ADDR(hba, res->end); - } - - DBG_RES("pcibios_resource_to_bus(%02x %s [%lx,%lx])\n", - dev->bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM", - region->start, region->end); -} - -void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ -#ifdef CONFIG_64BIT - struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data); -#endif - - if (res->flags & IORESOURCE_MEM) { - res->start = PCI_HOST_ADDR(hba, region->start); - res->end = PCI_HOST_ADDR(hba, region->end); - } - - if (res->flags & IORESOURCE_IO) { - res->start = region->start; - res->end = region->end; - } -} - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_resource_to_bus); -EXPORT_SYMBOL(pcibios_bus_to_resource); -#endif - /* * pcibios align resources() is called every time generic PCI code * wants to generate a new address. The process of looking for diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 7ff10c1e8664..0610e91bceb2 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -553,7 +553,6 @@ dino_fixup_bus(struct pci_bus *bus) struct list_head *ln; struct pci_dev *dev; struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge)); - int port_base = HBA_PORT_BASE(dino_dev->hba.hba_num); DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n", __func__, bus, bus->secondary, @@ -599,8 +598,6 @@ dino_fixup_bus(struct pci_bus *bus) list_for_each(ln, &bus->devices) { - int i; - dev = pci_dev_b(ln); if (is_card_dino(&dino_dev->hba.dev->id)) dino_card_fixup(dev); @@ -612,21 +609,6 @@ dino_fixup_bus(struct pci_bus *bus) if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) continue; - /* Adjust the I/O Port space addresses */ - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource *res = &dev->resource[i]; - if (res->flags & IORESOURCE_IO) { - res->start |= port_base; - res->end |= port_base; - } -#ifdef __LP64__ - /* Sign Extend MMIO addresses */ - else if (res->flags & IORESOURCE_MEM) { - res->start |= F_EXTEND(0UL); - res->end |= F_EXTEND(0UL); - } -#endif - } /* null out the ROM resource if there is one (we don't * care about an expansion rom on parisc, since it * usually contains (x86) bios code) */ @@ -991,11 +973,14 @@ static int __init dino_probe(struct parisc_device *dev) dev->dev.platform_data = dino_dev; - pci_add_resource(&resources, &dino_dev->hba.io_space); + pci_add_resource_offset(&resources, &dino_dev->hba.io_space, + HBA_PORT_BASE(dino_dev->hba.hba_num)); if (dino_dev->hba.lmmio_space.flags) - pci_add_resource(&resources, &dino_dev->hba.lmmio_space); + pci_add_resource_offset(&resources, &dino_dev->hba.lmmio_space, + dino_dev->hba.lmmio_space_offset); if (dino_dev->hba.elmmio_space.flags) - pci_add_resource(&resources, &dino_dev->hba.elmmio_space); + pci_add_resource_offset(&resources, &dino_dev->hba.elmmio_space, + dino_dev->hba.lmmio_space_offset); if (dino_dev->hba.gmmio_space.flags) pci_add_resource(&resources, &dino_dev->hba.gmmio_space); diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index d5f3d753a108..e8857647e210 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -635,7 +635,6 @@ lba_fixup_bus(struct pci_bus *bus) u16 status; #endif struct lba_device *ldev = LBA_DEV(parisc_walk_tree(bus->bridge)); - int lba_portbase = HBA_PORT_BASE(ldev->hba.hba_num); DBG("lba_fixup_bus(0x%p) bus %d platform_data 0x%p\n", bus, bus->secondary, bus->bridge->platform_data); @@ -726,27 +725,6 @@ lba_fixup_bus(struct pci_bus *bus) if (!res->start) continue; - if (res->flags & IORESOURCE_IO) { - DBG("lba_fixup_bus() I/O Ports [%lx/%lx] -> ", - res->start, res->end); - res->start |= lba_portbase; - res->end |= lba_portbase; - DBG("[%lx/%lx]\n", res->start, res->end); - } else if (res->flags & IORESOURCE_MEM) { - /* - ** Convert PCI (IO_VIEW) addresses to - ** processor (PA_VIEW) addresses - */ - DBG("lba_fixup_bus() MMIO [%lx/%lx] -> ", - res->start, res->end); - res->start = PCI_HOST_ADDR(HBA_DATA(ldev), res->start); - res->end = PCI_HOST_ADDR(HBA_DATA(ldev), res->end); - DBG("[%lx/%lx]\n", res->start, res->end); - } else { - DBG("lba_fixup_bus() WTF? 0x%lx [%lx/%lx] XXX", - res->flags, res->start, res->end); - } - /* ** FIXME: this will result in whinging for devices ** that share expansion ROMs (think quad tulip), but @@ -1514,11 +1492,14 @@ lba_driver_probe(struct parisc_device *dev) lba_dev->hba.lmmio_space.flags = 0; } - pci_add_resource(&resources, &lba_dev->hba.io_space); + pci_add_resource_offset(&resources, &lba_dev->hba.io_space, + HBA_PORT_BASE(lba_dev->hba.hba_num)); if (lba_dev->hba.elmmio_space.start) - pci_add_resource(&resources, &lba_dev->hba.elmmio_space); + pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space, + lba_dev->hba.lmmio_space_offset); if (lba_dev->hba.lmmio_space.flags) - pci_add_resource(&resources, &lba_dev->hba.lmmio_space); + pci_add_resource_offset(&resources, &lba_dev->hba.lmmio_space, + lba_dev->hba.lmmio_space_offset); if (lba_dev->hba.gmmio_space.flags) pci_add_resource(&resources, &lba_dev->hba.gmmio_space); -- cgit v1.2.3-58-ga151 From fb127cb9de791d62fb393d6e65fa9869bddd2460 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:19:04 -0700 Subject: PCI: collapse pcibios_resource_to_bus Everybody uses the generic pcibios_resource_to_bus() supplied by the core now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion. Signed-off-by: Bjorn Helgaas --- arch/alpha/include/asm/pci.h | 2 -- arch/arm/include/asm/pci.h | 2 -- arch/ia64/include/asm/pci.h | 2 -- arch/microblaze/include/asm/pci.h | 2 -- arch/mips/include/asm/pci.h | 2 -- arch/mn10300/include/asm/pci.h | 2 -- arch/parisc/include/asm/pci.h | 2 -- arch/powerpc/include/asm/pci.h | 2 -- arch/sh/include/asm/pci.h | 2 -- arch/sparc/include/asm/pci_32.h | 2 -- arch/sparc/include/asm/pci_64.h | 2 -- drivers/pci/probe.c | 44 +++++++++++++-------------------------- include/asm-generic/pci.h | 2 -- 13 files changed, 15 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h index 121c797eb14f..d01afb78919c 100644 --- a/arch/alpha/include/asm/pci.h +++ b/arch/alpha/include/asm/pci.h @@ -100,8 +100,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } -#define ARCH_HAS_GENERIC_PCI_OFFSETS - #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index static inline int pci_proc_domain(struct pci_bus *bus) diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 4748a75ed112..a98a2e112fae 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -57,8 +57,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); -#define ARCH_HAS_GENERIC_PCI_OFFSETS - /* * Dummy implementation; always return 0. */ diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h index 519bb5ce3075..b22e5f5fa593 100644 --- a/arch/ia64/include/asm/pci.h +++ b/arch/ia64/include/asm/pci.h @@ -108,8 +108,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) return (pci_domain_nr(bus) != 0); } -#define ARCH_HAS_GENERIC_PCI_OFFSETS - static inline struct resource * pcibios_select_root(struct pci_dev *pdev, struct resource *res) { diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 8db01f705b3c..a0da88bf70c5 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -94,8 +94,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus, */ #define PCI_DMA_BUS_IS_PHYS (1) -#define ARCH_HAS_GENERIC_PCI_OFFSETS - static inline struct resource *pcibios_select_root(struct pci_dev *pdev, struct resource *res) { diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index 6420e8df4e45..fcd4060f6421 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -113,8 +113,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, } #endif -#define ARCH_HAS_GENERIC_PCI_OFFSETS - #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index static inline int pci_proc_domain(struct pci_bus *bus) diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index dfe1581c0c9d..8137c25c4e15 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -85,8 +85,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, /* implement the pci_ DMA API in terms of the generic device dma_ one */ #include -#define ARCH_HAS_GENERIC_PCI_OFFSETS - static inline struct resource * pcibios_select_root(struct pci_dev *pdev, struct resource *res) { diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h index a8b591fdd564..3234f492d575 100644 --- a/arch/parisc/include/asm/pci.h +++ b/arch/parisc/include/asm/pci.h @@ -215,8 +215,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, } #endif -#define ARCH_HAS_GENERIC_PCI_OFFSETS - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't need to penalize isa irq's */ diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 839178bf2776..201e352d488d 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -154,8 +154,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus, #endif /* CONFIG_PPC64 */ -#define ARCH_HAS_GENERIC_PCI_OFFSETS - extern void pcibios_claim_one_bus(struct pci_bus *b); extern void pcibios_finish_adding_to_bus(struct pci_bus *bus); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 3b5b6abb3aea..bff96c2e7d25 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -114,8 +114,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, /* Board-specific fixup routines. */ int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin); -#define ARCH_HAS_GENERIC_PCI_OFFSETS - #define pci_domain_nr(bus) ((struct pci_channel *)(bus)->sysdata)->index static inline int pci_proc_domain(struct pci_bus *bus) diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h index 6384f30429bb..dc503297481f 100644 --- a/arch/sparc/include/asm/pci_32.h +++ b/arch/sparc/include/asm/pci_32.h @@ -52,8 +52,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, * 64Kbytes by the Host controller. */ -#define ARCH_HAS_GENERIC_PCI_OFFSETS - static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) { return PCI_IRQ_NONE; diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h index 2918bd12c19b..1633b718d3bc 100644 --- a/arch/sparc/include/asm/pci_64.h +++ b/arch/sparc/include/asm/pci_64.h @@ -73,8 +73,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); -#define ARCH_HAS_GENERIC_PCI_OFFSETS - static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) { return PCI_IRQ_NONE; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index a677b1e995de..36c22032ea14 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -66,8 +66,8 @@ static bool resource_contains(struct resource *res1, struct resource *res2) return res1->start <= res2->start && res1->end >= res2->end; } -void pci_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) { struct pci_host_bridge *bridge = pci_host_bridge(dev); struct pci_host_bridge_window *window; @@ -86,6 +86,7 @@ void pci_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->start = res->start - offset; region->end = res->end - offset; } +EXPORT_SYMBOL(pcibios_resource_to_bus); static bool region_contains(struct pci_bus_region *region1, struct pci_bus_region *region2) @@ -93,8 +94,8 @@ static bool region_contains(struct pci_bus_region *region1, return region1->start <= region2->start && region1->end >= region2->end; } -void pci_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) { struct pci_host_bridge *bridge = pci_host_bridge(dev); struct pci_host_bridge_window *window; @@ -117,22 +118,7 @@ void pci_bus_to_resource(struct pci_dev *dev, struct resource *res, res->start = region->start + offset; res->end = region->end + offset; } - -#ifdef ARCH_HAS_GENERIC_PCI_OFFSETS -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - pci_resource_to_bus(dev, region, res); -} -EXPORT_SYMBOL(pcibios_resource_to_bus); - -void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - pci_bus_to_resource(dev, res, region); -} EXPORT_SYMBOL(pcibios_bus_to_resource); -#endif /* * PCI Bus Class @@ -309,11 +295,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pci_write_config_dword(dev, pos + 4, 0); region.start = 0; region.end = sz64; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); } else { region.start = l64; region.end = l64 + sz64; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } @@ -325,7 +311,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, region.start = l; region.end = l + sz; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } @@ -383,7 +369,7 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child) res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; region.start = base; region.end = limit + 0xfff; - pci_bus_to_resource(dev, &res2, ®ion); + pcibios_bus_to_resource(dev, &res2, ®ion); if (!res->start) res->start = res2.start; if (!res->end) @@ -409,7 +395,7 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; region.start = base; region.end = limit + 0xfffff; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } } @@ -458,7 +444,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) res->flags |= IORESOURCE_MEM_64; region.start = base; region.end = limit + 0xfffff; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } } @@ -1071,24 +1057,24 @@ int pci_setup_device(struct pci_dev *dev) region.end = 0x1F7; res = &dev->resource[0]; res->flags = LEGACY_IO_RESOURCE; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); region.start = 0x3F6; region.end = 0x3F6; res = &dev->resource[1]; res->flags = LEGACY_IO_RESOURCE; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); } if ((progif & 4) == 0) { region.start = 0x170; region.end = 0x177; res = &dev->resource[2]; res->flags = LEGACY_IO_RESOURCE; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); region.start = 0x376; region.end = 0x376; res = &dev->resource[3]; res->flags = LEGACY_IO_RESOURCE; - pci_bus_to_resource(dev, res, ®ion); + pcibios_bus_to_resource(dev, res, ®ion); } } break; diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h index 0410346e2cf6..e80a0495e5b0 100644 --- a/include/asm-generic/pci.h +++ b/include/asm-generic/pci.h @@ -6,8 +6,6 @@ #ifndef _ASM_GENERIC_PCI_H #define _ASM_GENERIC_PCI_H -#define ARCH_HAS_GENERIC_PCI_OFFSETS - static inline struct resource * pcibios_select_root(struct pci_dev *pdev, struct resource *res) { -- cgit v1.2.3-58-ga151 From 0c5be0cb0edfe3b5c4b62eac68aa2aa15ec681af Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 19:23:29 -0800 Subject: PCI: Retry on IORESOURCE_IO type allocations When enabling pci reallocation for a pci bridge, we clear the small size in in bridge and re-assign with requested + optional size for first several tries, but Ram mention could have problem with one case: https://bugzilla.kernel.org/show_bug.cgi?id=15960 After checking the booting log in https://lkml.org/lkml/2010/4/19/44 [regression, bisected] Xonar DX invalid PCI I/O range since 977d17bb174 We should not stop too early for io ports. Apr 19 10:19:38 [kernel] pci 0000:04:00.0: BAR 7: can't assign io (size 0x4000) Apr 19 10:19:38 [kernel] pci 0000:05:01.0: BAR 8: assigned [mem 0x80400000-0x805fffff] Apr 19 10:19:38 [kernel] pci 0000:05:01.0: BAR 7: can't assign io (size 0x2000) Apr 19 10:19:38 [kernel] pci 0000:05:02.0: BAR 7: can't assign io (size 0x1000) Apr 19 10:19:38 [kernel] pci 0000:05:03.0: BAR 7: can't assign io (size 0x1000) Apr 19 10:19:38 [kernel] pci 0000:08:00.0: BAR 7: can't assign io (size 0x1000) Apr 19 10:19:38 [kernel] pci 0000:09:04.0: BAR 0: can't assign io (size 0x100) and clear 00:1c.0 to retry again. This patch removes IORESOUCE_IO checking, and tries one more time. It gives us a chance to get an allocation for the 00:1c.0 io port range because the range from 0x4000 to 0x8000 will be freed and we can use it. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 2991a8975064..162edfb356b6 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1292,7 +1292,6 @@ pci_assign_unassigned_resources(void) struct pci_dev_resource *fail_res; unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; - unsigned long failed_type; int pci_try_num = 1; /* don't realloc if asked to do so */ @@ -1327,16 +1326,7 @@ again: if (list_empty(&fail_head)) goto enable_and_dump; - failed_type = 0; - list_for_each_entry(fail_res, &fail_head, list) - failed_type |= fail_res->flags; - - /* - * io port are tight, don't try extra - * or if reach the limit, don't want to try more - */ - failed_type &= type_mask; - if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) { + if (tried_times >= pci_try_num) { free_list(&fail_head); goto enable_and_dump; } -- cgit v1.2.3-58-ga151 From b55438fdd5173a367659a7e200acea6c9f77b8cb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 19:23:30 -0800 Subject: PCI: prepare pci=realloc for multiple options Let the user could enable and disable with pci=realloc=on or pci=realloc=off Also 1. move variable and functions near the place they are used. 2. change macro to function 3. change related functions and variable to static and _init 4. update parameter description accordingly. This will let us add a config option to control default behavior, and still allow the user to turn off automatic reallocation if it fails on their platform until a permanent solution is found. -v2: still honor pci=realloc, and treat it as pci=realloc=on also use enum instead of ... -v3: update kernel-paramenters.txt according to Jesse. Signed-off-by: Yinghai Lu Acked-by: Jesse Barnes Signed-off-by: Jesse Barnes --- Documentation/kernel-parameters.txt | 9 +++++++-- drivers/pci/pci.c | 4 +++- drivers/pci/pci.h | 2 +- drivers/pci/setup-bus.c | 34 +++++++++++++++++++++++++++------- 4 files changed, 38 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7fb7a4b161ff..7dc523e082a2 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2109,8 +2109,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. the default. off: Turn ECRC off on: Turn ECRC on. - realloc reallocate PCI resources if allocations done by BIOS - are erroneous. + realloc= Enable/disable reallocating PCI bridge resources + if allocations done by BIOS are too small to + accommodate resources required by all child + devices. + off: Turn realloc off + on: Turn realloc on + realloc same as realloc=on pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power Management. diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8f30736dbf3f..e9f9dc183cfc 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3772,8 +3772,10 @@ static int __init pci_setup(char *str) pci_no_msi(); } else if (!strcmp(str, "noaer")) { pci_no_aer(); + } else if (!strncmp(str, "realloc=", 8)) { + pci_realloc_get_opt(str + 8); } else if (!strncmp(str, "realloc", 7)) { - pci_realloc(); + pci_realloc_get_opt("on"); } else if (!strcmp(str, "nodomains")) { pci_no_domains(); } else if (!strncmp(str, "cbiosize=", 9)) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 586ac9b097e4..1fc63b39f83f 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -149,7 +149,7 @@ static inline void pci_no_msi(void) { } static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } #endif -extern void pci_realloc(void); +void pci_realloc_get_opt(char *); static inline int pci_no_d1d2(struct pci_dev *dev) { diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 162edfb356b6..219722df68d6 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -48,13 +48,6 @@ static void free_list(struct list_head *head) } } -int pci_realloc_enable = 0; -#define pci_realloc_enabled() pci_realloc_enable -void pci_realloc(void) -{ - pci_realloc_enable = 1; -} - /** * add_to_list() - add a new resource tracker to the list * @head: Head of the list @@ -1273,6 +1266,33 @@ static int __init pci_get_max_depth(void) return depth; } +/* + * -1: undefined, will auto detect later + * 0: disabled by user + * 1: disabled by auto detect + * 2: enabled by user + * 3: enabled by auto detect + */ +enum enable_type { + undefined = -1, + user_disabled, + auto_disabled, + user_enabled, + auto_enabled, +}; + +static enum enable_type pci_realloc_enable __initdata = undefined; +void __init pci_realloc_get_opt(char *str) +{ + if (!strncmp(str, "off", 3)) + pci_realloc_enable = user_disabled; + else if (!strncmp(str, "on", 2)) + pci_realloc_enable = user_enabled; +} +static bool __init pci_realloc_enabled(void) +{ + return pci_realloc_enable >= user_enabled; +} /* * first try will not touch pci bridge res -- cgit v1.2.3-58-ga151 From eb572e7c76f154d75f90a783924f88afc34d5fec Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 19:23:31 -0800 Subject: PCI: print out suggestion about using pci=realloc let user know they could try if pci=realloc could help. -v2: update suggestion text. Suggested-by: Jesse Barnes Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 219722df68d6..e21e1c237301 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1347,6 +1347,9 @@ again: goto enable_and_dump; if (tried_times >= pci_try_num) { + if (pci_realloc_enable == undefined) + printk(KERN_INFO "Some PCI device resources are unassigned, try booting with pci=realloc\n"); + free_list(&fail_head); goto enable_and_dump; } -- cgit v1.2.3-58-ga151 From b07f2ebc109b607789f648dedcff4b125f9afec6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 19:23:32 -0800 Subject: PCI: add a PCI resource reallocation config option Add a new config option, PCI_REALLOC_ENABLE_AUTO, which will automatically try to re-allocate PCI resources if PCI_IOV support is enabled and the SR-IOV resources are unassigned. Behavior can still be controlled using the pci=realloc= parameter. -v2: According to Jesse, adding one CONFIG option for distribution to disable it or enable it. -v3: update Kconfig text (jbarnes) Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/Kconfig | 13 +++++++++++++ drivers/pci/setup-bus.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 37856f7c7781..848bfb84c04c 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -31,6 +31,19 @@ config PCI_DEBUG When in doubt, say N. +config PCI_REALLOC_ENABLE_AUTO + bool "Enable PCI resource re-allocation detection" + depends on PCI + help + Say Y here if you want the PCI core to detect if PCI resource + re-allocation needs to be enabled. You can always use pci=realloc=on + or pci=realloc=off to override it. Note this feature is a no-op + unless PCI_IOV support is also enabled; in that case it will + automatically re-allocate PCI resources if SR-IOV BARs have not + been allocated by the BIOS. + + When in doubt, say N. + config PCI_STUB tristate "PCI Stub driver" depends on PCI diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index e21e1c237301..c9214a14b49b 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1294,6 +1294,31 @@ static bool __init pci_realloc_enabled(void) return pci_realloc_enable >= user_enabled; } +static void __init pci_realloc_detect(void) +{ +#if defined(CONFIG_PCI_IOV) && defined(CONFIG_PCI_REALLOC_ENABLE_AUTO) + struct pci_dev *dev = NULL; + + if (pci_realloc_enable != undefined) + return; + + for_each_pci_dev(dev) { + int i; + + for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) { + struct resource *r = &dev->resource[i]; + + /* Not assigned, or rejected by kernel ? */ + if (r->flags && !r->start) { + pci_realloc_enable = auto_enabled; + + return; + } + } + } +#endif +} + /* * first try will not touch pci bridge res * second and later try will clear small leaf bridge res @@ -1315,6 +1340,7 @@ pci_assign_unassigned_resources(void) int pci_try_num = 1; /* don't realloc if asked to do so */ + pci_realloc_detect(); if (pci_realloc_enabled()) { int max_depth = pci_get_max_depth(); @@ -1349,6 +1375,8 @@ again: if (tried_times >= pci_try_num) { if (pci_realloc_enable == undefined) printk(KERN_INFO "Some PCI device resources are unassigned, try booting with pci=realloc\n"); + else if (pci_realloc_enable == auto_enabled) + printk(KERN_INFO "Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off\n"); free_list(&fail_head); goto enable_and_dump; -- cgit v1.2.3-58-ga151 From f4ca5c6a56278ca5421bc2e40422e4155b6735d8 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 23:46:49 -0800 Subject: PCI: Add class support in quirk handling Recently added support to allow quirks to report duration also make the boot log very crowded when initcall_debug is specified. One thing we can to do mitigate this is to not call quirks unnecessarily by adding a new quirk declaration macro that takes a class argument. The new macro takes a class value and a class shift value (since it can vary) so that quirks will be limited to certain device classes, greatly reducing the number we call on every PCI device addition. -v2: fix v1 that left over of sparated patch. -v3: according to Jesse, change cls to class, cls_shift, to class_shift. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 12 +++++----- include/linux/pci.h | 63 +++++++++++++++++++++++++++++++++++++++++++--------- 2 files changed, 59 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index fb544d6d29f6..2b4b1ea158cf 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2961,17 +2961,19 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { - while (f < end) { - if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) && - (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) { + for (; f < end; f++) + if ((f->class == (u32) (dev->class >> f->class_shift) || + f->class == (u32) PCI_ANY_ID) && + (f->vendor == dev->vendor || + f->vendor == (u16) PCI_ANY_ID) && + (f->device == dev->device || + f->device == (u16) PCI_ANY_ID)) { dev_dbg(&dev->dev, "calling %pF\n", f->hook); if (initcall_debug) do_one_fixup_debug(f->hook, dev); else f->hook(dev); } - f++; - } } extern struct pci_fixup __start_pci_fixups_early[]; diff --git a/include/linux/pci.h b/include/linux/pci.h index be58a51706cc..74a20bdc93f6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1382,7 +1382,10 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar, */ struct pci_fixup { - u16 vendor, device; /* You can use PCI_ANY_ID here of course */ + u16 vendor; /* You can use PCI_ANY_ID here of course */ + u16 device; /* You can use PCI_ANY_ID here of course */ + u32 class; /* You can use PCI_ANY_ID here too */ + unsigned int class_shift; /* should be 0, 8, 16 */ void (*hook)(struct pci_dev *dev); }; @@ -1397,30 +1400,68 @@ enum pci_fixup_pass { }; /* Anonymous variables would be nice... */ -#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \ - static const struct pci_fixup __pci_fixup_##name __used \ - __attribute__((__section__(#section))) = { vendor, device, hook }; +#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \ + class_shift, hook) \ + static const struct pci_fixup const __pci_fixup_##name __used \ + __attribute__((__section__(#section), aligned((sizeof(void *))))) \ + = { vendor, device, class, class_shift, hook }; + +#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ + resume##vendor##device##hook, vendor, device, class, \ + class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ + resume_early##vendor##device##hook, vendor, device, \ + class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ + suspend##vendor##device##hook, vendor, device, class, \ + class_shift, hook) + #define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ - resume##vendor##device##hook, vendor, device, hook) + resume##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ - resume_early##vendor##device##hook, vendor, device, hook) + resume_early##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ - suspend##vendor##device##hook, vendor, device, hook) + suspend##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); -- cgit v1.2.3-58-ga151 From 52d21b5ef4bfc676944a3f214ac05c0406e3966f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 23:46:53 -0800 Subject: PCI: Use class for quirk for host bridge mmio_always_on Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 2b4b1ea158cf..007abec4328f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -102,10 +102,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment); */ static void __devinit quirk_mmio_always_on(struct pci_dev *dev) { - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) - dev->mmio_always_on = 1; + dev->mmio_always_on = 1; } -DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_mmio_always_on); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); /* The Mellanox Tavor device gives false positive parity errors * Mark this device with a broken_parity_status, to allow -- cgit v1.2.3-58-ga151 From ae9de56bdda2d27d11df8d2dcde81f429ac348ee Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 23:46:54 -0800 Subject: PCI: Use class for quirk for cardbus_legacy Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 007abec4328f..f41e00d6f2c3 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1004,12 +1004,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt */ static void quirk_cardbus_legacy(struct pci_dev *dev) { - if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class) - return; pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); } -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); +DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); /* * Following the PCI ordering rules is optional on the AMD762. I'm not -- cgit v1.2.3-58-ga151 From faa738bba5a0fcca93c5818eecbaad63ed2b6948 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 23:46:55 -0800 Subject: PCI: Use class for quirk for legacy ATA NO_D3 Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f41e00d6f2c3..a86081299633 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1166,17 +1166,20 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, qui static void __devinit quirk_no_ata_d3(struct pci_dev *pdev) { - /* Quirk the legacy ATA devices only. The AHCI ones are ok */ - if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) - pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; + pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3); +/* Quirk the legacy ATA devices only. The AHCI ones are ok */ +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); /* ALi loses some register settings that we cannot then restore */ -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); /* VIA comes back fine but we need to keep it alive or ACPI GTM failures occur when mode detecting */ -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. -- cgit v1.2.3-58-ga151 From 08803efe849ebe81d1ca5bb5e443415d035087a0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 23:46:56 -0800 Subject: PCI: Use class for quirk for netmos class fixup Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a86081299633..03e455a1d1a9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1878,8 +1878,7 @@ static void __devinit quirk_netmos(struct pci_dev *dev) case PCI_DEVICE_ID_NETMOS_9745: case PCI_DEVICE_ID_NETMOS_9845: case PCI_DEVICE_ID_NETMOS_9855: - if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL && - num_parallel) { + if (num_parallel) { dev_info(&dev->dev, "Netmos %04x (%u parallel, " "%u serial); changing class SERIAL to OTHER " "(use parport_serial)\n", @@ -1889,7 +1888,8 @@ static void __devinit quirk_netmos(struct pci_dev *dev) } } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); +DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); static void __devinit quirk_e100_interrupt(struct pci_dev *dev) { -- cgit v1.2.3-58-ga151 From 4c5b28e26d3621e188288293ccfe82ea1177499f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 23:46:57 -0800 Subject: PCI: Use class for quirk for intel e100 interrupt fixup Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 03e455a1d1a9..91733a29a28a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1957,7 +1957,8 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev) iounmap(csr); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); /* * The 82575 and 82598 may experience data corruption issues when transitioning -- cgit v1.2.3-58-ga151 From 40c96236bdab60b5879a277270ee209b87fc846f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 23:46:58 -0800 Subject: PCI: Use class for quirk for ti816x class fixup Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 91733a29a28a..e198589d0990 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2822,12 +2822,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); static void __devinit fixup_ti816x_class(struct pci_dev* dev) { /* TI 816x devices do not have class code set when in PCIe boot mode */ - if (dev->class == PCI_CLASS_NOT_DEFINED) { - dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n"); - dev->class = PCI_CLASS_MULTIMEDIA_VIDEO; - } + dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n"); + dev->class = PCI_CLASS_MULTIMEDIA_VIDEO; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, + PCI_CLASS_NOT_DEFINED, 0, fixup_ti816x_class); /* Some PCIe devices do not work reliably with the claimed maximum * payload size supported. -- cgit v1.2.3-58-ga151 From 8474ecd9231434d71a39cd1ba118629e1b036137 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 23 Feb 2012 23:46:59 -0800 Subject: PCI: Use class for quirk for usb host controller fixup Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/usb/host/pci-quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index caf87428ca43..30f3aa0a6e98 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -876,4 +876,5 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI) quirk_usb_handoff_xhci(pdev); } -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); -- cgit v1.2.3-58-ga151 From 2069ecfbe14ebd71a6f98e8a00724e9adf4fe4ee Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 15 Feb 2012 21:40:31 -0800 Subject: PCI: Move "pci reassigndev resource alignment" out of quirks.c This isn't really a quirk; calling it directly from pci_add_device makes more sense. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci.h | 5 +--- drivers/pci/probe.c | 3 +++ drivers/pci/quirks.c | 63 ------------------------------------------------- drivers/pci/setup-res.c | 4 ---- 5 files changed, 66 insertions(+), 71 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e9f9dc183cfc..b832f0fece97 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3694,6 +3694,68 @@ int pci_is_reassigndev(struct pci_dev *dev) return (pci_specified_resource_alignment(dev) != 0); } +/* + * This function disables memory decoding and releases memory resources + * of the device specified by kernel's boot parameter 'pci=resource_alignment='. + * It also rounds up size to specified alignment. + * Later on, the kernel will assign page-aligned memory resource back + * to the device. + */ +void pci_reassigndev_resource_alignment(struct pci_dev *dev) +{ + int i; + struct resource *r; + resource_size_t align, size; + u16 command; + + if (!pci_is_reassigndev(dev)) + return; + + if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL && + (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { + dev_warn(&dev->dev, + "Can't reassign resources to host bridge.\n"); + return; + } + + dev_info(&dev->dev, + "Disabling memory decoding and releasing memory resources.\n"); + pci_read_config_word(dev, PCI_COMMAND, &command); + command &= ~PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, command); + + align = pci_specified_resource_alignment(dev); + for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) { + r = &dev->resource[i]; + if (!(r->flags & IORESOURCE_MEM)) + continue; + size = resource_size(r); + if (size < align) { + size = align; + dev_info(&dev->dev, + "Rounding up size of resource #%d to %#llx.\n", + i, (unsigned long long)size); + } + r->end = size - 1; + r->start = 0; + } + /* Need to disable bridge's resource window, + * to enable the kernel to reassign new resource + * window later on. + */ + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) { + r = &dev->resource[i]; + if (!(r->flags & IORESOURCE_MEM)) + continue; + r->end = resource_size(r) - 1; + r->start = 0; + } + pci_disable_bridge_window(dev); + } +} + ssize_t pci_set_resource_alignment_param(const char *buf, size_t count) { if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1) diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 1fc63b39f83f..e4943479b234 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -228,11 +228,8 @@ static inline int pci_ari_enabled(struct pci_bus *bus) return bus->self && bus->self->ari_enabled; } -#ifdef CONFIG_PCI_QUIRKS -extern int pci_is_reassigndev(struct pci_dev *dev); -resource_size_t pci_specified_resource_alignment(struct pci_dev *dev); +void pci_reassigndev_resource_alignment(struct pci_dev *dev); extern void pci_disable_bridge_window(struct pci_dev *dev); -#endif /* Single Root I/O Virtualization */ struct pci_sriov { diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 36c22032ea14..944e05a66b97 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1325,6 +1325,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) /* Fix up broken headers */ pci_fixup_device(pci_fixup_header, dev); + /* moved out from quirk header fixup code */ + pci_reassigndev_resource_alignment(dev); + /* Clear the state_saved flag. */ dev->state_saved = false; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e198589d0990..f8f81d4f29ff 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -31,69 +31,6 @@ #include /* isa_dma_bridge_buggy */ #include "pci.h" -/* - * This quirk function disables memory decoding and releases memory resources - * of the device specified by kernel's boot parameter 'pci=resource_alignment='. - * It also rounds up size to specified alignment. - * Later on, the kernel will assign page-aligned memory resource back - * to the device. - */ -static void __devinit quirk_resource_alignment(struct pci_dev *dev) -{ - int i; - struct resource *r; - resource_size_t align, size; - u16 command; - - if (!pci_is_reassigndev(dev)) - return; - - if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL && - (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { - dev_warn(&dev->dev, - "Can't reassign resources to host bridge.\n"); - return; - } - - dev_info(&dev->dev, - "Disabling memory decoding and releasing memory resources.\n"); - pci_read_config_word(dev, PCI_COMMAND, &command); - command &= ~PCI_COMMAND_MEMORY; - pci_write_config_word(dev, PCI_COMMAND, command); - - align = pci_specified_resource_alignment(dev); - for (i=0; i < PCI_BRIDGE_RESOURCES; i++) { - r = &dev->resource[i]; - if (!(r->flags & IORESOURCE_MEM)) - continue; - size = resource_size(r); - if (size < align) { - size = align; - dev_info(&dev->dev, - "Rounding up size of resource #%d to %#llx.\n", - i, (unsigned long long)size); - } - r->end = size - 1; - r->start = 0; - } - /* Need to disable bridge's resource window, - * to enable the kernel to reassign new resource - * window later on. - */ - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && - (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { - for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) { - r = &dev->resource[i]; - if (!(r->flags & IORESOURCE_MEM)) - continue; - r->end = resource_size(r) - 1; - r->start = 0; - } - pci_disable_bridge_window(dev); - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment); - /* * Decoding should be disabled for a PCI device during BAR sizing to avoid * conflict. But doing so may cause problems on host bridge and perhaps other diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index f968185aa192..eea85dafc763 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -114,7 +114,6 @@ int pci_claim_resource(struct pci_dev *dev, int resource) } EXPORT_SYMBOL(pci_claim_resource); -#ifdef CONFIG_PCI_QUIRKS void pci_disable_bridge_window(struct pci_dev *dev) { dev_info(&dev->dev, "disabling bridge mem windows\n"); @@ -127,9 +126,6 @@ void pci_disable_bridge_window(struct pci_dev *dev) pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0x0000fff0); pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0xffffffff); } -#endif /* CONFIG_PCI_QUIRKS */ - - static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev, int resno, resource_size_t size, resource_size_t align) -- cgit v1.2.3-58-ga151 From 3cf8b64380af6fd515740b010606ada4637818c5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 15 Feb 2012 21:40:32 -0800 Subject: PCI: print out PCI device info along with duration Makes it a little easier to figure out which device may have caused a slow quirk. Signed-off-by: Yinghai Lu Cc: Arjan van de Ven Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f8f81d4f29ff..7ef41832b833 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2854,14 +2854,15 @@ static void do_one_fixup_debug(void (*fn)(struct pci_dev *dev), struct pci_dev * ktime_t calltime, delta, rettime; unsigned long long duration; - printk(KERN_DEBUG "calling %pF @ %i\n", fn, task_pid_nr(current)); + printk(KERN_DEBUG "calling %pF @ %i for %s\n", + fn, task_pid_nr(current), dev_name(&dev->dev)); calltime = ktime_get(); fn(dev); rettime = ktime_get(); delta = ktime_sub(rettime, calltime); duration = (unsigned long long) ktime_to_ns(delta) >> 10; - printk(KERN_DEBUG "pci fixup %pF returned after %lld usecs\n", fn, - duration); + printk(KERN_DEBUG "pci fixup %pF returned after %lld usecs for %s\n", + fn, duration, dev_name(&dev->dev)); } /* -- cgit v1.2.3-58-ga151 From 210647af897af8ef2d00828aa2a6b1b42206aae6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 25 Feb 2012 13:54:20 -0800 Subject: PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device The old pci_remove_bus_device actually did stop and remove. Make the name reflect that to reduce confusion. This patch is done by sed scripts and changes back some incorrect __pci_remove_bus_device changes. Suggested-by: Jesse Barnes Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- arch/arm/mach-ixp2000/ixdp2400.c | 4 ++-- arch/arm/mach-ixp2000/ixdp2800.c | 4 ++-- arch/arm/mach-ixp2000/ixdp2x00.c | 4 ++-- arch/powerpc/platforms/pseries/pci_dlpar.c | 2 +- drivers/message/fusion/mptbase.c | 2 +- drivers/pci/hotplug/acpiphp_glue.c | 4 ++-- drivers/pci/hotplug/cpci_hotplug_pci.c | 2 +- drivers/pci/hotplug/cpqphp_pci.c | 2 +- drivers/pci/hotplug/fakephp.c | 2 +- drivers/pci/hotplug/ibmphp_core.c | 2 +- drivers/pci/hotplug/pciehp_pci.c | 2 +- drivers/pci/hotplug/rpadlpar_core.c | 2 +- drivers/pci/hotplug/sgi_hotplug.c | 2 +- drivers/pci/hotplug/shpchp_pci.c | 2 +- drivers/pci/iov.c | 4 ++-- drivers/pci/pci-sysfs.c | 2 +- drivers/pci/remove.c | 8 ++++---- drivers/pci/xen-pcifront.c | 4 ++-- drivers/platform/x86/asus-wmi.c | 2 +- drivers/platform/x86/eeepc-laptop.c | 2 +- drivers/scsi/mpt2sas/mpt2sas_base.c | 2 +- include/linux/pci.h | 2 +- 22 files changed, 31 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index f53e911ec94a..d519944653ad 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -134,11 +134,11 @@ static void ixdp2400_pci_postinit(void) if (ixdp2x00_master_npu()) { dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } else { dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); ixdp2x00_slave_pci_postinit(); diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index a2e7c393e74f..b415febd2025 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -262,14 +262,14 @@ int __init ixdp2800_pci_init(void) pci_common_init(&ixdp2800_pci); if (ixdp2x00_master_npu()) { dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); ixdp2800_master_enable_slave(); ixdp2800_master_wait_for_slave_bus_scan(); } else { dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 634b6c852f68..dd9838299068 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -239,12 +239,12 @@ void ixdp2x00_slave_pci_postinit(void) * Remove PMC device is there is one */ if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) { - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 55d4ec1bd1ac..200a1ca2528e 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -84,7 +84,7 @@ void pcibios_remove_pci_devices(struct pci_bus *bus) list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { pr_debug(" * Removing %s...\n", pci_name(dev)); eeh_remove_bus_device(dev); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); } } EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices); diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index a7dc4672d996..a5c591ffe395 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -346,7 +346,7 @@ static int mpt_remove_dead_ioc_func(void *arg) if ((pdev == NULL)) return -1; - pci_remove_bus_device(pdev); + pci_stop_and_remove_bus_device(pdev); return 0; } diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 12d070ca7674..fdc34b599e7b 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -910,7 +910,7 @@ static int disable_device(struct acpiphp_slot *slot) disable_bridges(pdev->subordinate); pci_disable_device(pdev); } - pci_remove_bus_device(pdev); + pci_stop_and_remove_bus_device(pdev); pci_dev_put(pdev); } } @@ -1067,7 +1067,7 @@ static void acpiphp_sanitize_bus(struct pci_bus *bus) res->end) { /* Could not assign a required resources * for this device, remove it */ - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); break; } } diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 829c327cfb5e..ae853ccd0cd5 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -341,7 +341,7 @@ int cpci_unconfigure_slot(struct slot* slot) dev = pci_get_slot(slot->bus, PCI_DEVFN(PCI_SLOT(slot->devfn), i)); if (dev) { - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } } diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c index 6173b9a4544e..1c8494021a42 100644 --- a/drivers/pci/hotplug/cpqphp_pci.c +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -127,7 +127,7 @@ int cpqhp_unconfigure_device(struct pci_func* func) struct pci_dev* temp = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, j)); if (temp) { pci_dev_put(temp); - pci_remove_bus_device(temp); + pci_stop_and_remove_bus_device(temp); } } return 0; diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 17d10e2e8fb6..a019c9a712be 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -40,7 +40,7 @@ static ssize_t legacy_show(struct kobject *kobj, struct attribute *attr, static void remove_callback(void *data) { - pci_remove_bus_device((struct pci_dev *)data); + pci_stop_and_remove_bus_device((struct pci_dev *)data); } static ssize_t legacy_store(struct kobject *kobj, struct attribute *attr, diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 5506e0e8fbc0..4fda7e6a86a7 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -721,7 +721,7 @@ static void ibm_unconfigure_device(struct pci_func *func) for (j = 0; j < 0x08; j++) { temp = pci_get_bus_and_slot(func->busno, (func->device << 3) | j); if (temp) { - pci_remove_bus_device(temp); + pci_stop_and_remove_bus_device(temp); pci_dev_put(temp); } } diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index a4031dfe938e..47d9dc06b109 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -141,7 +141,7 @@ int pciehp_unconfigure_device(struct slot *p_slot) break; } } - pci_remove_bus_device(temp); + pci_stop_and_remove_bus_device(temp); /* * Ensure that no new Requests will be generated from * the device. diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index c56a9413e1af..1e117c2a3cad 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -389,7 +389,7 @@ int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn) BUG_ON(!bus->self); pr_debug("PCI: Now removing bridge device %s\n", pci_name(bus->self)); eeh_remove_bus_device(bus->self); - pci_remove_bus_device(bus->self); + pci_stop_and_remove_bus_device(bus->self); return 0; } diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index 72d507b6a2aa..de573113c102 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -554,7 +554,7 @@ static int disable_slot(struct hotplug_slot *bss_hotplug_slot) PCI_FUNC(func))); if (dev) { sn_bus_free_data(dev); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } } diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index a2ccfcd3c298..df7e4bfadae3 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -124,7 +124,7 @@ int shpchp_unconfigure_device(struct slot *p_slot) break; } } - pci_remove_bus_device(temp); + pci_stop_and_remove_bus_device(temp); pci_dev_put(temp); } return rc; diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index 687b3c8e8e3b..6554e1a0f634 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -142,7 +142,7 @@ failed2: failed1: pci_dev_put(dev); mutex_lock(&iov->dev->sriov->lock); - pci_remove_bus_device(virtfn); + pci_stop_and_remove_bus_device(virtfn); virtfn_remove_bus(dev->bus, virtfn_bus(dev, id)); mutex_unlock(&iov->dev->sriov->lock); @@ -182,7 +182,7 @@ static void virtfn_remove(struct pci_dev *dev, int id, int reset) sysfs_remove_link(&virtfn->dev.kobj, "physfn"); mutex_lock(&iov->dev->sriov->lock); - pci_remove_bus_device(virtfn); + pci_stop_and_remove_bus_device(virtfn); virtfn_remove_bus(dev->bus, virtfn_bus(dev, id)); mutex_unlock(&iov->dev->sriov->lock); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index d9723039e99a..a55e248618cd 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -330,7 +330,7 @@ static void remove_callback(struct device *dev) struct pci_dev *pdev = to_pci_dev(dev); mutex_lock(&pci_remove_rescan_mutex); - pci_remove_bus_device(pdev); + pci_stop_and_remove_bus_device(pdev); mutex_unlock(&pci_remove_rescan_mutex); } diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 82f8ae572703..7abe67b45cc8 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -79,7 +79,7 @@ EXPORT_SYMBOL(pci_remove_bus); static void __pci_remove_behind_bridge(struct pci_dev *dev); /** - * pci_remove_bus_device - remove a PCI device and any children + * pci_stop_and_remove_bus_device - remove a PCI device and any children * @dev: the device to remove * * Remove a PCI device from the device lists, informing the drivers @@ -102,7 +102,7 @@ static void __pci_remove_bus_device(struct pci_dev *dev) pci_destroy_dev(dev); } -void pci_remove_bus_device(struct pci_dev *dev) +void pci_stop_and_remove_bus_device(struct pci_dev *dev) { pci_stop_bus_device(dev); __pci_remove_bus_device(dev); @@ -145,7 +145,7 @@ static void pci_stop_bus_devices(struct pci_bus *bus) struct list_head *l, *n; /* - * VFs could be removed by pci_remove_bus_device() in the + * VFs could be removed by pci_stop_and_remove_bus_device() in the * pci_stop_bus_devices() code path for PF. * aka, bus->devices get updated in the process. * but VFs are inserted after PFs when SRIOV is enabled for PF, @@ -174,6 +174,6 @@ void pci_stop_bus_device(struct pci_dev *dev) pci_stop_dev(dev); } -EXPORT_SYMBOL(pci_remove_bus_device); +EXPORT_SYMBOL(pci_stop_and_remove_bus_device); EXPORT_SYMBOL(pci_remove_behind_bridge); EXPORT_SYMBOL_GPL(pci_stop_bus_device); diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index 7cf3d2fcf56a..fb8a39c7c3d6 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -544,7 +544,7 @@ static void free_root_bus_devs(struct pci_bus *bus) dev = container_of(bus->devices.next, struct pci_dev, bus_list); dev_dbg(&dev->dev, "removing device\n"); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); } } @@ -1045,7 +1045,7 @@ static int pcifront_detach_devices(struct pcifront_device *pdev) domain, bus, slot, func); continue; } - pci_remove_bus_device(pci_dev); + pci_stop_and_remove_bus_device(pci_dev); pci_dev_put(pci_dev); dev_dbg(&pdev->xdev->dev, diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 72d731c21d45..9929246895de 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -571,7 +571,7 @@ static void asus_rfkill_hotplug(struct asus_wmi *asus) } else { dev = pci_get_slot(bus, 0); if (dev) { - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } } diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index ea44abd8df48..d9a9e2bedb30 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -646,7 +646,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) } else { dev = pci_get_slot(bus, 0); if (dev) { - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } } diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 0b2c95583660..c7d5a921a430 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -132,7 +132,7 @@ static int mpt2sas_remove_dead_ioc_func(void *arg) pdev = ioc->pdev; if ((pdev == NULL)) return -1; - pci_remove_bus_device(pdev); + pci_stop_and_remove_bus_device(pdev); return 0; } diff --git a/include/linux/pci.h b/include/linux/pci.h index 74a20bdc93f6..a4c552d9908e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -686,7 +686,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); -extern void pci_remove_bus_device(struct pci_dev *dev); +extern void pci_stop_and_remove_bus_device(struct pci_dev *dev); extern void pci_stop_bus_device(struct pci_dev *dev); void pci_setup_cardbus(struct pci_bus *bus); extern void pci_sort_breadthfirst(void); -- cgit v1.2.3-58-ga151 From 6754b9e9c33502223db066de50dda8a876f70c2c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 25 Feb 2012 13:54:22 -0800 Subject: PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge The old pci_remove_behind_bridge actually do stop and remove. Make the name reflect that to reduce confusion. Suggested-by: Jesse Barnes Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/remove.c | 7 ++++--- drivers/pcmcia/cardbus.c | 2 +- include/linux/pci.h | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 7abe67b45cc8..bd2be1c4c668 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -127,14 +127,15 @@ static void pci_stop_behind_bridge(struct pci_dev *dev) } /** - * pci_remove_behind_bridge - remove all devices behind a PCI bridge + * pci_stop_and_remove_behind_bridge - stop and remove all devices behind + * a PCI bridge * @dev: PCI bridge device * * Remove all devices on the bus, except for the parent bridge. * This also removes any child buses, and any devices they may * contain in a depth-first manner. */ -void pci_remove_behind_bridge(struct pci_dev *dev) +void pci_stop_and_remove_behind_bridge(struct pci_dev *dev) { pci_stop_behind_bridge(dev); __pci_remove_behind_bridge(dev); @@ -175,5 +176,5 @@ void pci_stop_bus_device(struct pci_dev *dev) } EXPORT_SYMBOL(pci_stop_and_remove_bus_device); -EXPORT_SYMBOL(pci_remove_behind_bridge); +EXPORT_SYMBOL(pci_stop_and_remove_behind_bridge); EXPORT_SYMBOL_GPL(pci_stop_bus_device); diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c index 9a58862f1401..6e75153c5b4f 100644 --- a/drivers/pcmcia/cardbus.c +++ b/drivers/pcmcia/cardbus.c @@ -108,5 +108,5 @@ void cb_free(struct pcmcia_socket *s) struct pci_dev *bridge = s->cb_dev; if (bridge) - pci_remove_behind_bridge(bridge); + pci_stop_and_remove_behind_bridge(bridge); } diff --git a/include/linux/pci.h b/include/linux/pci.h index a4c552d9908e..073ae9d97ad6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -946,7 +946,7 @@ int __must_check __pci_register_driver(struct pci_driver *, struct module *, __pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME) void pci_unregister_driver(struct pci_driver *dev); -void pci_remove_behind_bridge(struct pci_dev *dev); +void pci_stop_and_remove_behind_bridge(struct pci_dev *dev); struct pci_driver *pci_dev_driver(const struct pci_dev *dev); int pci_add_dynid(struct pci_driver *drv, unsigned int vendor, unsigned int device, -- cgit v1.2.3-58-ga151 From 6b22cf3f35fd332e4cc2c1b27056920b3643667a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 25 Feb 2012 13:54:21 -0800 Subject: PCI: export __pci_remove_bus_device Don't switch to pci_remove_bus_device yet, keep the __ prefix for now (the behavior is still the same: remove without stopping first). This allows other out of tree users or pending patches to get notified from compiler warning. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/remove.c | 4 +++- include/linux/pci.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index bd2be1c4c668..fd77e2bde2e8 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -90,7 +90,7 @@ static void __pci_remove_behind_bridge(struct pci_dev *dev); * device lists, remove the /proc entry, and notify userspace * (/sbin/hotplug). */ -static void __pci_remove_bus_device(struct pci_dev *dev) +void __pci_remove_bus_device(struct pci_dev *dev) { if (dev->subordinate) { struct pci_bus *b = dev->subordinate; @@ -102,6 +102,8 @@ static void __pci_remove_bus_device(struct pci_dev *dev) pci_destroy_dev(dev); } +EXPORT_SYMBOL(__pci_remove_bus_device); + void pci_stop_and_remove_bus_device(struct pci_dev *dev) { pci_stop_bus_device(dev); diff --git a/include/linux/pci.h b/include/linux/pci.h index 073ae9d97ad6..5584aac96e28 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -686,6 +686,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); +extern void __pci_remove_bus_device(struct pci_dev *dev); extern void pci_stop_and_remove_bus_device(struct pci_dev *dev); extern void pci_stop_bus_device(struct pci_dev *dev); void pci_setup_cardbus(struct pci_bus *bus); -- cgit v1.2.3-58-ga151 From f6330c3178112a7b7f18e7f51f1cbb89fa1174c7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 25 Feb 2012 13:54:23 -0800 Subject: PCI: make acpihp use __pci_remove_bus_device instead pci_stop_bus_device gets called before in the same loop. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index fdc34b599e7b..806c44fa645a 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -910,7 +910,7 @@ static int disable_device(struct acpiphp_slot *slot) disable_bridges(pdev->subordinate); pci_disable_device(pdev); } - pci_stop_and_remove_bus_device(pdev); + __pci_remove_bus_device(pdev); pci_dev_put(pdev); } } -- cgit v1.2.3-58-ga151 From 6748dcc269e52925993e0d68447858b41b88b4be Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 1 Mar 2012 00:06:33 +0100 Subject: PCI / PCIe: Introduce command line option to disable ARI There are PCIe devices on the market that report ARI support but then fail to initialize correctly when ARI is actually used. This leads to situations in which kernels 2.6.34 and newer fail to handle systems where the previous kernels worked without any apparent problems. Unfortunately, it is currently unknown how many such devices are there. For this reason, introduce a new kernel command line option, pci=noari, allowing users to disable PCIe ARI altogether if they see problems with PCIe device initialization. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- Documentation/kernel-parameters.txt | 1 + drivers/pci/pci.c | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7dc523e082a2..3d153e5723b4 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2116,6 +2116,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. off: Turn realloc off on: Turn realloc on realloc same as realloc=on + noari do not use PCIe ARI. pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power Management. diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index b832f0fece97..815674415267 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -94,6 +94,9 @@ u8 pci_cache_line_size; */ unsigned int pcibios_max_latency = 255; +/* If set, the PCIe ARI capability will not be used. */ +static bool pcie_ari_disabled; + /** * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children * @bus: pointer to PCI bus structure to search @@ -1955,7 +1958,7 @@ void pci_enable_ari(struct pci_dev *dev) u16 flags, ctrl; struct pci_dev *bridge; - if (!pci_is_pcie(dev) || dev->devfn) + if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn) return; pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); @@ -3840,6 +3843,8 @@ static int __init pci_setup(char *str) pci_realloc_get_opt("on"); } else if (!strcmp(str, "nodomains")) { pci_no_domains(); + } else if (!strncmp(str, "noari", 5)) { + pcie_ari_disabled = true; } else if (!strncmp(str, "cbiosize=", 9)) { pci_cardbus_io_size = memparse(str + 9, &str); } else if (!strncmp(str, "cbmemsize=", 10)) { -- cgit v1.2.3-58-ga151 From cf48fb6a2bf2e59990e1438d0dedc706df911996 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 16 Mar 2012 17:47:59 -0600 Subject: PCI: fix bridge I/O window bus-to-resource conversion In 5bfa14ed9f3c, I forgot to initialize res2.flags before calling pcibios_bus_to_resource(), which depends on the resource type to locate the correct aperture. This bug won't hurt x86, which currently never has an offset between bus and CPU addresses, but will affect other architectures. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 944e05a66b97..5e1ca3c58a7d 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -367,6 +367,7 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child) if (base && base <= limit) { res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; + res2.flags = res->flags; region.start = base; region.end = limit + 0xfff; pcibios_bus_to_resource(dev, &res2, ®ion); -- cgit v1.2.3-58-ga151