From abad398337f038f5822e53c55eff5b0820ef7efe Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Wed, 8 Apr 2015 18:26:12 +0300 Subject: iio: pressure: bmp280: fix temp compensation Temperature reads on bmp280 device always return 0, due to a missing step in the compensation formula (data->tfine is never initialized). Initialize data->tfine value so we get correct temperature and pressure values. Signed-off-by: Irina Tirdea Reviewed-by: Vlad Dogaru Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c index 7c623e2bd633..a2602d8dd6d5 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280.c @@ -172,6 +172,7 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data, var2 = (((((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1]))) * ((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) * ((s32)(s16)le16_to_cpu(buf[T3]))) >> 14; + data->t_fine = var1 + var2; return (data->t_fine * 5 + 128) >> 8; } -- cgit v1.2.3-58-ga151 From d0716b0ea4ce11a13477163c14b26e180922ba51 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Mon, 6 Apr 2015 11:38:20 -0700 Subject: iio/axp288_adc: add missing channel info mask Commit 65de7654d39c70c2b ("iio: iio: Fix iio_channel_read return if channel havn't info") added a check for valid info masks. This patch adds missing channel info masks for all ADC channels. Otherwise, iio_read_channel_raw() would return -EINVAL when called by consumer drivers. Note that the change of _processed to _raw actually fixes an ABI abuse in the original driver where it was used to avoid some special handling rather than because it was correct. Signed-off-by: Jacob Pan Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/axp288_adc.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 08bcfb061ca5..56008a86b78f 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -53,39 +53,42 @@ static const struct iio_chan_spec const axp288_adc_channels[] = { .channel = 0, .address = AXP288_TS_ADC_H, .datasheet_name = "TS_PIN", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_TEMP, .channel = 1, .address = AXP288_PMIC_ADC_H, .datasheet_name = "PMIC_TEMP", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_TEMP, .channel = 2, .address = AXP288_GP_ADC_H, .datasheet_name = "GPADC", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_CURRENT, .channel = 3, .address = AXP20X_BATT_CHRG_I_H, .datasheet_name = "BATT_CHG_I", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_CURRENT, .channel = 4, .address = AXP20X_BATT_DISCHRG_I_H, .datasheet_name = "BATT_DISCHRG_I", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_VOLTAGE, .channel = 5, .address = AXP20X_BATT_V_H, .datasheet_name = "BATT_V", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, }; @@ -151,9 +154,6 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev, chan->address)) dev_err(&indio_dev->dev, "TS pin restore\n"); break; - case IIO_CHAN_INFO_PROCESSED: - ret = axp288_adc_read_channel(val, chan->address, info->regmap); - break; default: ret = -EINVAL; } -- cgit v1.2.3-58-ga151 From 937125aca00e0478c4024afe58bc620a7bbe2a93 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Fri, 17 Apr 2015 17:51:08 +0300 Subject: iio: adc: spmi-vadc: Fix overflow in output value normalization With 'dx' equal to 0.625V and 15 bit ADC, calculations overflow when difference against GND is ~20% of the ADC range. Fix this. Signed-off-by: Ivan T. Ivanov Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/qcom-spmi-vadc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c index 3211729bcb0b..0c4618b4d515 100644 --- a/drivers/iio/adc/qcom-spmi-vadc.c +++ b/drivers/iio/adc/qcom-spmi-vadc.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -471,11 +472,11 @@ static s32 vadc_calibrate(struct vadc_priv *vadc, const struct vadc_channel_prop *prop, u16 adc_code) { const struct vadc_prescale_ratio *prescale; - s32 voltage; + s64 voltage; voltage = adc_code - vadc->graph[prop->calibration].gnd; voltage *= vadc->graph[prop->calibration].dx; - voltage = voltage / vadc->graph[prop->calibration].dy; + voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy); if (prop->calibration == VADC_CALIB_ABSOLUTE) voltage += vadc->graph[prop->calibration].dx; @@ -487,7 +488,7 @@ static s32 vadc_calibrate(struct vadc_priv *vadc, voltage = voltage * prescale->den; - return voltage / prescale->num; + return div64_s64(voltage, prescale->num); } static int vadc_decimation_from_dt(u32 value) -- cgit v1.2.3-58-ga151 From c2aab3d58b96002555a3e70004f593b043830248 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 14 Apr 2015 14:53:22 -0700 Subject: iio: light: hid-sensor-prox: Fix modifier Currently in_proximity_(null)_raw is getting presented as raw sysfs attribute. Same with the scan_elements. The modifier doesn't apply to this channel. Signed-off-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-prox.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index 3ecf79ed08ac..88f21bbe947c 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -43,8 +43,6 @@ struct prox_state { static const struct iio_chan_spec prox_channels[] = { { .type = IIO_PROXIMITY, - .modified = 1, - .channel2 = IIO_NO_MOD, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | -- cgit v1.2.3-58-ga151 From 964e2255f1d73fc0136bc206a78a1f86bdad72a7 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 14 Apr 2015 14:54:18 -0700 Subject: iio: pressure: hid-sensor-press: Fix modifier Fix "null" in the raw attribute and scan elements. Signed-off-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hid-sensor-press.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index 1af314926ebd..476a7d03d2ce 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -47,8 +47,6 @@ struct press_state { static const struct iio_chan_spec press_channels[] = { { .type = IIO_PRESSURE, - .modified = 1, - .channel2 = IIO_NO_MOD, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | -- cgit v1.2.3-58-ga151 From 3960d2c0c4aafe98da47a4a2eb64dfa8e88d8df5 Mon Sep 17 00:00:00 2001 From: Thomas Betker Date: Wed, 15 Apr 2015 21:11:47 +0200 Subject: iio: adc: xilinx: Fix register addresses Define the register addresses for MIN_VCCPINT, MIN_VCCPAUX, MIN_VCCO_DDR correctly. Signed-off-by: Thomas Betker Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h index c7487e8d7f80..54adc5087210 100644 --- a/drivers/iio/adc/xilinx-xadc.h +++ b/drivers/iio/adc/xilinx-xadc.h @@ -145,9 +145,9 @@ static inline int xadc_write_adc_reg(struct xadc *xadc, unsigned int reg, #define XADC_REG_MAX_VCCPINT 0x28 #define XADC_REG_MAX_VCCPAUX 0x29 #define XADC_REG_MAX_VCCO_DDR 0x2a -#define XADC_REG_MIN_VCCPINT 0x2b -#define XADC_REG_MIN_VCCPAUX 0x2c -#define XADC_REG_MIN_VCCO_DDR 0x2d +#define XADC_REG_MIN_VCCPINT 0x2c +#define XADC_REG_MIN_VCCPAUX 0x2d +#define XADC_REG_MIN_VCCO_DDR 0x2e #define XADC_REG_CONF0 0x40 #define XADC_REG_CONF1 0x41 -- cgit v1.2.3-58-ga151 From d6c96c42283601e311a7a1a3d7e51cde9d7fdb6e Mon Sep 17 00:00:00 2001 From: Thomas Betker Date: Wed, 15 Apr 2015 21:11:48 +0200 Subject: iio: adc: xilinx: Fix "vccaux" channel .address For the "vccaux" channel, read the VCCAUX register, not VCCINT. Signed-off-by: Thomas Betker Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index a221f7329b79..0ad7b502c593 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -1008,7 +1008,7 @@ static const struct iio_event_spec xadc_voltage_events[] = { static const struct iio_chan_spec xadc_channels[] = { XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP), XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true), - XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCINT, "vccaux", true), + XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCAUX, "vccaux", true), XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true), XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true), XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true), -- cgit v1.2.3-58-ga151 From 00db4e52f4541965f7fda225eb458a75f892017b Mon Sep 17 00:00:00 2001 From: Thomas Betker Date: Wed, 15 Apr 2015 21:11:49 +0200 Subject: iio: adc: xilinx: Fix VREFP scale The scaling factor for VREFP is 3.0/4096, not 1.0/4096; fix this to get correct readings. Signed-off-by: Thomas Betker Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 0ad7b502c593..6fa629b3c168 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -856,6 +856,7 @@ static int xadc_read_raw(struct iio_dev *indio_dev, switch (chan->address) { case XADC_REG_VCCINT: case XADC_REG_VCCAUX: + case XADC_REG_VREFP: case XADC_REG_VCCBRAM: case XADC_REG_VCCPINT: case XADC_REG_VCCPAUX: -- cgit v1.2.3-58-ga151 From 97ffae1d30c3f6ceee67d5b0d3e540c08c13c744 Mon Sep 17 00:00:00 2001 From: Thomas Betker Date: Wed, 15 Apr 2015 21:11:50 +0200 Subject: iio: adc: xilinx: Fix VREFN sign The VREFN channel is bipolar, not unipolar. Small negative values do occur (e.g., -1mV), and unsigned conversion maps them incorrectly to large positive values (about +1V), so fix this. Signed-off-by: Thomas Betker Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 6fa629b3c168..ce93bd8e3f68 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -997,7 +997,7 @@ static const struct iio_event_spec xadc_voltage_events[] = { .num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \ .scan_index = (_scan_index), \ .scan_type = { \ - .sign = 'u', \ + .sign = ((_addr) == XADC_REG_VREFN) ? 's' : 'u', \ .realbits = 12, \ .storagebits = 16, \ .shift = 4, \ -- cgit v1.2.3-58-ga151 From 8e71c04f863a1754f21b27fb8ecb773d680a0a80 Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Mon, 20 Apr 2015 13:57:18 +0200 Subject: iio:st_sensors: Fix oops when probing SPI devices In SPI mode the transfer buffer is locked with a mutex. However this mutex is only initilized after the probe, but some transfer needs to be done in the probe. To fix this bug we move the mutex initialization at the beginning of the device probe. Signed-off-by: Alban Bedel Acked-by: Denis Ciocca Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 1 + drivers/iio/common/st_sensors/st_sensors_core.c | 2 -- drivers/iio/gyro/st_gyro_core.c | 1 + drivers/iio/magnetometer/st_magn_core.c | 1 + drivers/iio/pressure/st_pressure_core.c | 1 + 5 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 58d1d13d552a..211b13271c61 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -546,6 +546,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &accel_info; + mutex_init(&adata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index edd13d2b4121..8dd0477e201c 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -304,8 +304,6 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, struct st_sensors_platform_data *of_pdata; int err = 0; - mutex_init(&sdata->tb.buf_lock); - /* If OF/DT pdata exists, it will take precedence of anything else */ of_pdata = st_sensors_of_probe(indio_dev->dev.parent, pdata); if (of_pdata) diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 21395f26d227..ffe96642b6d0 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -400,6 +400,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &gyro_info; + mutex_init(&gdata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 8ade473f99fe..2e56f812a644 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -369,6 +369,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &magn_info; + mutex_init(&mdata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 97baf40d424b..e881fa6291e9 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -417,6 +417,7 @@ int st_press_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &press_info; + mutex_init(&press_data->tb.buf_lock); st_sensors_power_enable(indio_dev); -- cgit v1.2.3-58-ga151 From cd62322a9767f9a0bcf855123c478187e38a10f4 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Mon, 13 Apr 2015 18:40:48 +0300 Subject: iio: accel: mma9553: fix endianness issue when reading status Refactor code for simplicity and clarity. This also fixes an endianness issue with the original code. When reading multiple registers, the received buffer of 16-bytes words is little endian (status, step count). On big endian machines, casting them to u32 would result in reversed order in the buffer (step count, status) leading to incorrect values for step count and activity. Signed-off-by: Irina Tirdea Reported-by: Hartmut Knaack Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9553.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 2df1af7d43fc..607dbfcb49ab 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -316,22 +316,19 @@ static int mma9553_set_config(struct mma9553_data *data, u16 reg, static int mma9553_read_activity_stepcnt(struct mma9553_data *data, u8 *activity, u16 *stepcnt) { - u32 status_stepcnt; - u16 status; + u16 buf[2]; int ret; ret = mma9551_read_status_words(data->client, MMA9551_APPID_PEDOMETER, - MMA9553_REG_STATUS, sizeof(u32), - (u16 *) &status_stepcnt); + MMA9553_REG_STATUS, sizeof(u32), buf); if (ret < 0) { dev_err(&data->client->dev, "error reading status and stepcnt\n"); return ret; } - status = status_stepcnt & MMA9553_MASK_CONF_WORD; - *activity = mma9553_get_bits(status, MMA9553_MASK_STATUS_ACTIVITY); - *stepcnt = status_stepcnt >> 16; + *activity = mma9553_get_bits(buf[0], MMA9553_MASK_STATUS_ACTIVITY); + *stepcnt = buf[1]; return 0; } -- cgit v1.2.3-58-ga151 From 2a4d20322d1c619ae2f07378d5b360e85f562c98 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Mon, 13 Apr 2015 18:40:50 +0300 Subject: iio: accel: mma9551_core: prevent buffer overrun The mma9551 functions that read/write word arrays from the device have a limit for the buffer size given by the device specifications. Check that the requested buffer length is within required limits when transferring word arrays. This will prevent buffer overrun in the mma9551_read/write_*_words functions and also in the mma9551_transfer call when writing into the MBOX response/request structure. Signed-off-by: Irina Tirdea Reported-by: Hartmut Knaack Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9551_core.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c index 7f55a6d7cd03..c6d5a3a40b60 100644 --- a/drivers/iio/accel/mma9551_core.c +++ b/drivers/iio/accel/mma9551_core.c @@ -389,7 +389,12 @@ int mma9551_read_config_words(struct i2c_client *client, u8 app_id, { int ret, i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, reg, NULL, 0, (u8 *) be_buf, len); @@ -424,7 +429,12 @@ int mma9551_read_status_words(struct i2c_client *client, u8 app_id, { int ret, i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, reg, NULL, 0, (u8 *) be_buf, len); @@ -459,7 +469,12 @@ int mma9551_write_config_words(struct i2c_client *client, u8 app_id, { int i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[(MMA9551_MAX_MAILBOX_DATA_REGS - 1) / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } for (i = 0; i < len_words; i++) be_buf[i] = cpu_to_be16(buf[i]); -- cgit v1.2.3-58-ga151 From ae2ec9597c9329fdf503af264966bc7e421daa58 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Mon, 13 Apr 2015 18:40:51 +0300 Subject: iio: accel: mma9553: add enable channel for activity Add an enable channel for activity, so it can also be polled independently of events or other channels. Signed-off-by: Irina Tirdea Reported-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9553.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 607dbfcb49ab..1a256055a6f7 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -968,7 +968,8 @@ static const struct iio_chan_spec_ext_info mma9553_ext_info[] = { .modified = 1, \ .channel2 = _chan2, \ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT) | \ + BIT(IIO_CHAN_INFO_ENABLE), \ .event_spec = mma9553_activity_events, \ .num_event_specs = ARRAY_SIZE(mma9553_activity_events), \ .ext_info = mma9553_ext_info, \ -- cgit v1.2.3-58-ga151 From 1d93353da536d3403ac291dc96070f434f6cf285 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Mon, 13 Apr 2015 18:40:49 +0300 Subject: iio: accel: mma9553: check input value for activity period When setting the activity period, the value introduced by the user in sysfs is not checked for validity. Add a boundary check so that only allowed values are reported as successfully written to device. Signed-off-by: Irina Tirdea Reported-by: Hartmut Knaack Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9553.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 1a256055a6f7..365a109aaaef 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -54,6 +54,7 @@ #define MMA9553_MASK_CONF_STEPCOALESCE GENMASK(7, 0) #define MMA9553_REG_CONF_ACTTHD 0x0E +#define MMA9553_MAX_ACTTHD GENMASK(15, 0) /* Pedometer status registers (R-only) */ #define MMA9553_REG_STATUS 0x00 @@ -869,6 +870,9 @@ static int mma9553_write_event_value(struct iio_dev *indio_dev, case IIO_EV_INFO_PERIOD: switch (chan->type) { case IIO_ACTIVITY: + if (val < 0 || val > MMA9553_ACTIVITY_THD_TO_SEC( + MMA9553_MAX_ACTTHD)) + return -EINVAL; mutex_lock(&data->mutex); ret = mma9553_set_config(data, MMA9553_REG_CONF_ACTTHD, &data->conf.actthd, -- cgit v1.2.3-58-ga151 From 0e81bc99a0826db4cd2d6ba9a982579b1467a79f Mon Sep 17 00:00:00 2001 From: Michael Welling Date: Wed, 6 May 2015 11:49:17 -0500 Subject: iio: mcp320x: Fix occasional incorrect readings Without the cacheline alignment, the readings will occasionally incorrectly return 0. Signed-off-by: Michael Welling Signed-off-by: Jonathan Cameron --- drivers/iio/adc/mcp320x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index efbfd12a4bfd..8d9c9b9215dd 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -60,12 +60,12 @@ struct mcp320x { struct spi_message msg; struct spi_transfer transfer[2]; - u8 tx_buf; - u8 rx_buf[2]; - struct regulator *reg; struct mutex lock; const struct mcp320x_chip_info *chip_info; + + u8 tx_buf ____cacheline_aligned; + u8 rx_buf[2]; }; static int mcp320x_channel_to_tx_data(int device_index, -- cgit v1.2.3-58-ga151 From e5f1efb9ae71bbb79629d660dc19b51ce7b95439 Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sat, 2 May 2015 14:31:16 +0200 Subject: iio: kfifo: Set update_needed to false only if a buffer was allocated Check whether the allocation of a new kfifo buffer failed or not before setting the update_needed flag to false. This will make iio_request_update_kfifo() try to allocate a new buffer the next time a buffer update is requested. Signed-off-by: Gabriele Mazzotta Signed-off-by: Jonathan Cameron --- drivers/iio/kfifo_buf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c index 847ca561afe0..55c267bbfd2f 100644 --- a/drivers/iio/kfifo_buf.c +++ b/drivers/iio/kfifo_buf.c @@ -38,7 +38,8 @@ static int iio_request_update_kfifo(struct iio_buffer *r) kfifo_free(&buf->kf); ret = __iio_allocate_kfifo(buf, buf->buffer.bytes_per_datum, buf->buffer.length); - buf->update_needed = false; + if (ret >= 0) + buf->update_needed = false; } else { kfifo_reset_out(&buf->kf); } -- cgit v1.2.3-58-ga151 From bb6ce8b28d97f39c591e94322e3ad28ff22649b2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 11 Apr 2015 00:03:19 +0200 Subject: staging: sm750: remove incorrect __exit annotation The lynxfb_pci_remove function is used as the 'remove' callback of the driver, and must not be discarded: lynxfb_pci_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o This removes the extraneous annotation. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sm750fb/sm750.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c index 3c7ea95dd9f9..dbbb2f879a29 100644 --- a/drivers/staging/sm750fb/sm750.c +++ b/drivers/staging/sm750fb/sm750.c @@ -1250,7 +1250,7 @@ err_enable: return -ENODEV; } -static void __exit lynxfb_pci_remove(struct pci_dev *pdev) +static void lynxfb_pci_remove(struct pci_dev *pdev) { struct fb_info *info; struct lynx_share *share; -- cgit v1.2.3-58-ga151 From b5eed730bd3f216dd172d2d699686000f8cb9b38 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 8 Apr 2015 14:19:00 +0300 Subject: staging: rtl8712: freeing an ERR_PTR If memdup_user() fails then "pparmbuf" is an error pointer and we can't pass it to kfree(). I changed the "goto _r871x_mp_ioctl_hdl_exit" to a direct return. I changed the earlier goto to a direct return as well for consistency and removed the "pparmbuf = NULL" initializer since it's no longer needed. Fixes: 45de432775d6 ('Staging: rtl8712: Use memdup_user() instead of copy_from_user()') Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c index 42fba3f5b593..cb0b6387789f 100644 --- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c +++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c @@ -1900,23 +1900,20 @@ static int r871x_mp_ioctl_hdl(struct net_device *dev, struct mp_ioctl_handler *phandler; struct mp_ioctl_param *poidparam; unsigned long BytesRead, BytesWritten, BytesNeeded; - u8 *pparmbuf = NULL, bset; + u8 *pparmbuf, bset; u16 len; uint status; int ret = 0; - if ((!p->length) || (!p->pointer)) { - ret = -EINVAL; - goto _r871x_mp_ioctl_hdl_exit; - } + if ((!p->length) || (!p->pointer)) + return -EINVAL; + bset = (u8)(p->flags & 0xFFFF); len = p->length; - pparmbuf = NULL; pparmbuf = memdup_user(p->pointer, len); - if (IS_ERR(pparmbuf)) { - ret = PTR_ERR(pparmbuf); - goto _r871x_mp_ioctl_hdl_exit; - } + if (IS_ERR(pparmbuf)) + return PTR_ERR(pparmbuf); + poidparam = (struct mp_ioctl_param *)pparmbuf; if (poidparam->subcode >= MAX_MP_IOCTL_SUBCODE) { ret = -EINVAL; -- cgit v1.2.3-58-ga151 From b23f14302e86628625ac3982a6d23e35888755f2 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Sat, 4 Apr 2015 20:49:10 +0100 Subject: staging: vt6656: use ieee80211_tx_info to select packet type. Information for packet type is in ieee80211_tx_info band IEEE80211_BAND_5GHZ for PK_TYPE_11A. IEEE80211_TX_RC_USE_CTS_PROTECT via tx_rate flags selects PK_TYPE_11GB This ensures that the packet is always the right type. Signed-off-by: Malcolm Priestley Cc: # v3.17+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/rxtx.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c index f6c2cf8590c4..5c589962a1e8 100644 --- a/drivers/staging/vt6656/rxtx.c +++ b/drivers/staging/vt6656/rxtx.c @@ -805,10 +805,18 @@ int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb) vnt_schedule_command(priv, WLAN_CMD_SETPOWER); } - if (current_rate > RATE_11M) - pkt_type = priv->packet_type; - else + if (current_rate > RATE_11M) { + if (info->band == IEEE80211_BAND_5GHZ) { + pkt_type = PK_TYPE_11A; + } else { + if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT) + pkt_type = PK_TYPE_11GB; + else + pkt_type = PK_TYPE_11GA; + } + } else { pkt_type = PK_TYPE_11B; + } spin_lock_irqsave(&priv->lock, flags); -- cgit v1.2.3-58-ga151 From 3fa0917beb29d886550fcf61a6378563d1ce9684 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 9 Apr 2015 20:53:43 +0100 Subject: staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe TD_FLAGS_NETIF_SKB is only for data. Fixes issue of ack frames not being reported. Signed-off-by: Malcolm Priestley Cc: # v3.19+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 4bb4f8ee4132..7cd548428a8f 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -989,10 +989,8 @@ static void device_free_tx_buf(struct vnt_private *pDevice, PSTxDesc pDesc) skb->len, DMA_TO_DEVICE); } - if (pTDInfo->byFlags & TD_FLAGS_NETIF_SKB) + if (skb) ieee80211_tx_status_irqsafe(pDevice->hw, skb); - else - dev_kfree_skb_irq(skb); pTDInfo->skb_dma = 0; pTDInfo->skb = NULL; -- cgit v1.2.3-58-ga151 From 6e44dc4be009eef60a1744e4a4b830131f6b9a8e Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 9 Apr 2015 20:53:44 +0100 Subject: staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED Make use of this macro for non ack frames. Signed-off-by: Malcolm Priestley Cc: # v4.0 Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 7cd548428a8f..6d3df9514088 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -912,7 +912,11 @@ static int vnt_int_report_rate(struct vnt_private *priv, if (!(tsr1 & TSR1_TERR)) { info->status.rates[0].idx = idx; - info->flags |= IEEE80211_TX_STAT_ACK; + + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED; + else + info->flags |= IEEE80211_TX_STAT_ACK; } return 0; -- cgit v1.2.3-58-ga151 From ad3fee9b17b90b8f1ac94b615111b2f14dd90adb Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Sat, 11 Apr 2015 20:29:41 +0100 Subject: staging: vt6655: Fix 80211 control and management status reporting. Currently only TD_FLAGS_NETIF_SKB are reported back to mac80211. Move vnt_int_report_rate to report all frame types. Signed-off-by: Malcolm Priestley Cc: # v3.19+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 6d3df9514088..c81776363d8e 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -941,9 +941,6 @@ static int device_tx_srv(struct vnt_private *pDevice, unsigned int uIdx) /* Only the status of first TD in the chain is correct */ if (pTD->m_td1TD1.byTCR & TCR_STP) { if ((pTD->pTDInfo->byFlags & TD_FLAGS_NETIF_SKB) != 0) { - - vnt_int_report_rate(pDevice, pTD->pTDInfo, byTsr0, byTsr1); - if (!(byTsr1 & TSR1_TERR)) { if (byTsr0 != 0) { pr_debug(" Tx[%d] OK but has error. tsr1[%02X] tsr0[%02X]\n", @@ -962,6 +959,9 @@ static int device_tx_srv(struct vnt_private *pDevice, unsigned int uIdx) (int)uIdx, byTsr1, byTsr0); } } + + vnt_int_report_rate(pDevice, pTD->pTDInfo, byTsr0, byTsr1); + device_free_tx_buf(pDevice, pTD); pDevice->iTDUsed[uIdx]--; } -- cgit v1.2.3-58-ga151 From d65d2b25d2761153390df8026cca1a528d9b6c5a Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Tue, 21 Apr 2015 22:33:00 +0100 Subject: staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC The state of m_td0TD0.f1Owner should change after the buff_addr has been filled otherwise the device grabs the buffer too early. m_td0TD0.f1Owner is protected by memory barriers on both sides of change. iTDUsed is best incremented after MACvTransmit. It appears that f1Owner actually polls to do the memory transfer. A back port patch will be needed for v3.19 Signed-off-by: Malcolm Priestley Cc: # v4.0+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index c81776363d8e..930bbbebc102 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -1206,14 +1206,6 @@ static int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb) if (dma_idx == TYPE_AC0DMA) head_td->pTDInfo->byFlags = TD_FLAGS_NETIF_SKB; - priv->iTDUsed[dma_idx]++; - - /* Take ownership */ - wmb(); - head_td->m_td0TD0.f1Owner = OWNED_BY_NIC; - - /* get Next */ - wmb(); priv->apCurrTD[dma_idx] = head_td->next; spin_unlock_irqrestore(&priv->lock, flags); @@ -1234,11 +1226,18 @@ static int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb) head_td->buff_addr = cpu_to_le32(head_td->pTDInfo->skb_dma); + /* Poll Transmit the adapter */ + wmb(); + head_td->m_td0TD0.f1Owner = OWNED_BY_NIC; + wmb(); /* second memory barrier */ + if (head_td->pTDInfo->byFlags & TD_FLAGS_NETIF_SKB) MACvTransmitAC0(priv->PortOffset); else MACvTransmit0(priv->PortOffset); + priv->iTDUsed[dma_idx]++; + spin_unlock_irqrestore(&priv->lock, flags); return 0; -- cgit v1.2.3-58-ga151 From 032ed34a84263cdb396e4318fed6a92ed50add26 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Tue, 21 Apr 2015 22:33:01 +0100 Subject: staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value. The TSF counter is not set correctly. Use sync_tsf for last beacon value and get tsf local value. Remove qwLocalTSF variable and call CARDbGetCurrentTSF. Signed-off-by: Malcolm Priestley Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/card.c | 10 +++++++--- drivers/staging/vt6655/card.h | 2 +- drivers/staging/vt6655/device_main.c | 2 +- 3 files changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vt6655/card.c b/drivers/staging/vt6655/card.c index 1cdcf49b2445..e00c0605d154 100644 --- a/drivers/staging/vt6655/card.c +++ b/drivers/staging/vt6655/card.c @@ -362,12 +362,16 @@ bool CARDbSetPhyParameter(struct vnt_private *pDevice, u8 bb_type) * Return Value: none */ bool CARDbUpdateTSF(struct vnt_private *pDevice, unsigned char byRxRate, - u64 qwBSSTimestamp, u64 qwLocalTSF) + u64 qwBSSTimestamp) { + u64 local_tsf; u64 qwTSFOffset = 0; - if (qwBSSTimestamp != qwLocalTSF) { - qwTSFOffset = CARDqGetTSFOffset(byRxRate, qwBSSTimestamp, qwLocalTSF); + CARDbGetCurrentTSF(pDevice, &local_tsf); + + if (qwBSSTimestamp != local_tsf) { + qwTSFOffset = CARDqGetTSFOffset(byRxRate, qwBSSTimestamp, + local_tsf); /* adjust TSF, HW's TSF add TSF Offset reg */ VNSvOutPortD(pDevice->PortOffset + MAC_REG_TSFOFST, (u32)qwTSFOffset); VNSvOutPortD(pDevice->PortOffset + MAC_REG_TSFOFST + 4, (u32)(qwTSFOffset >> 32)); diff --git a/drivers/staging/vt6655/card.h b/drivers/staging/vt6655/card.h index 2dfc41952271..16cca49e680a 100644 --- a/drivers/staging/vt6655/card.h +++ b/drivers/staging/vt6655/card.h @@ -83,7 +83,7 @@ bool CARDbRadioPowerOff(struct vnt_private *); bool CARDbRadioPowerOn(struct vnt_private *); bool CARDbSetPhyParameter(struct vnt_private *, u8); bool CARDbUpdateTSF(struct vnt_private *, unsigned char byRxRate, - u64 qwBSSTimestamp, u64 qwLocalTSF); + u64 qwBSSTimestamp); bool CARDbSetBeaconPeriod(struct vnt_private *, unsigned short wBeaconInterval); #endif /* __CARD_H__ */ diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 930bbbebc102..b3860477eceb 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -1478,7 +1478,7 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_ASSOC && priv->op_mode != NL80211_IFTYPE_AP) { if (conf->assoc) { CARDbUpdateTSF(priv, conf->beacon_rate->hw_value, - conf->sync_device_ts, conf->sync_tsf); + conf->sync_tsf); CARDbSetBeaconPeriod(priv, conf->beacon_int); -- cgit v1.2.3-58-ga151 From 664a5c1d1e33cd89cb7883e8c74638cc482b5da7 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Tue, 21 Apr 2015 22:33:02 +0100 Subject: staging: vt6655: lock MACvWriteBSSIDAddress. This function selects page 1 and cause intermittent problems on interrupt handler. lock call with spin_lock_irqsave. Signed-off-by: Malcolm Priestley Cc: # v3.19+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index b3860477eceb..0343ae386f03 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -1417,9 +1417,16 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw, priv->current_aid = conf->aid; - if (changed & BSS_CHANGED_BSSID) + if (changed & BSS_CHANGED_BSSID) { + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + MACvWriteBSSIDAddress(priv->PortOffset, (u8 *)conf->bssid); + spin_unlock_irqrestore(&priv->lock, flags); + } + if (changed & BSS_CHANGED_BASIC_RATES) { priv->basic_rates = conf->basic_rates; -- cgit v1.2.3-58-ga151 From 13415a998adb1802b5bd6bd5a336331589e866a1 Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Thu, 7 May 2015 18:22:17 -0300 Subject: iio: adc: cc10001: Fix the channel number mapping When some of the ADC channels are reserved for remote CPUs, the scan index and the corresponding channel number doesn't match. This leads to convesion on the incorrect channel during triggered capture. Fix this by using a scan index to channel mapping encoded in the iio_chan_spec for this purpose while starting conversion on a particular ADC channel in trigger handler. Also, the channel_map is not really used anywhere but in probe(), so no need to keep track of it. Remove it from device structure. While here, add 1 to number of channels to register timestamp channel with the IIO core. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/cc10001_adc.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index 51e2a83c9404..357e6c213784 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -62,7 +62,6 @@ struct cc10001_adc_device { u16 *buf; struct mutex lock; - unsigned long channel_map; unsigned int start_delay_ns; unsigned int eoc_delay_ns; }; @@ -129,6 +128,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) struct iio_dev *indio_dev; unsigned int delay_ns; unsigned int channel; + unsigned int scan_idx; bool sample_invalid; u16 *data; int i; @@ -150,9 +150,10 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) i = 0; sample_invalid = false; - for_each_set_bit(channel, indio_dev->active_scan_mask, + for_each_set_bit(scan_idx, indio_dev->active_scan_mask, indio_dev->masklength) { + channel = indio_dev->channels[scan_idx].channel; cc10001_adc_start(adc_dev, channel); data[i] = cc10001_adc_poll_done(indio_dev, channel, delay_ns); @@ -255,22 +256,22 @@ static const struct iio_info cc10001_adc_info = { .update_scan_mode = &cc10001_update_scan_mode, }; -static int cc10001_adc_channel_init(struct iio_dev *indio_dev) +static int cc10001_adc_channel_init(struct iio_dev *indio_dev, + unsigned long channel_map) { - struct cc10001_adc_device *adc_dev = iio_priv(indio_dev); struct iio_chan_spec *chan_array, *timestamp; unsigned int bit, idx = 0; - indio_dev->num_channels = bitmap_weight(&adc_dev->channel_map, - CC10001_ADC_NUM_CHANNELS); + indio_dev->num_channels = bitmap_weight(&channel_map, + CC10001_ADC_NUM_CHANNELS) + 1; - chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels + 1, + chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels, sizeof(struct iio_chan_spec), GFP_KERNEL); if (!chan_array) return -ENOMEM; - for_each_set_bit(bit, &adc_dev->channel_map, CC10001_ADC_NUM_CHANNELS) { + for_each_set_bit(bit, &channel_map, CC10001_ADC_NUM_CHANNELS) { struct iio_chan_spec *chan = &chan_array[idx]; chan->type = IIO_VOLTAGE; @@ -305,6 +306,7 @@ static int cc10001_adc_probe(struct platform_device *pdev) unsigned long adc_clk_rate; struct resource *res; struct iio_dev *indio_dev; + unsigned long channel_map; int ret; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev)); @@ -313,9 +315,9 @@ static int cc10001_adc_probe(struct platform_device *pdev) adc_dev = iio_priv(indio_dev); - adc_dev->channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0); + channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0); if (!of_property_read_u32(node, "adc-reserved-channels", &ret)) - adc_dev->channel_map &= ~ret; + channel_map &= ~ret; adc_dev->reg = devm_regulator_get(&pdev->dev, "vref"); if (IS_ERR(adc_dev->reg)) @@ -361,7 +363,7 @@ static int cc10001_adc_probe(struct platform_device *pdev) adc_dev->start_delay_ns = adc_dev->eoc_delay_ns * CC10001_WAIT_CYCLES; /* Setup the ADC channels available on the device */ - ret = cc10001_adc_channel_init(indio_dev); + ret = cc10001_adc_channel_init(indio_dev, channel_map); if (ret < 0) goto err_disable_clk; -- cgit v1.2.3-58-ga151 From 892c89d5d7ffd1bb794fe54d86c0eef18d215fab Mon Sep 17 00:00:00 2001 From: Sławomir Demeszko Date: Tue, 5 May 2015 17:49:54 +0200 Subject: staging: gdm724x: Correction of variable usage after applying ALIGN() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix regression introduced by commit <29ef8a53542a>. After it writing AT commands to /dev/GCT-ATM0 is unsuccessful (no echo, no response) and dmesg show "gdmtty: invalid payload : 1 16 f011". Before that commit value of dummy_cnt was only a padding size. After using ALIGN() this value is increased by its first argument. So the following usage of this variable needs correction. Signed-off-by: Sławomir Demeszko Cc: stable # 3.14+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/gdm724x/gdm_mux.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/gdm724x/gdm_mux.c b/drivers/staging/gdm724x/gdm_mux.c index 8199b0a697bb..1cf24e4edf25 100644 --- a/drivers/staging/gdm724x/gdm_mux.c +++ b/drivers/staging/gdm724x/gdm_mux.c @@ -158,7 +158,7 @@ static int up_to_host(struct mux_rx *r) unsigned int start_flag; unsigned int payload_size; unsigned short packet_type; - int dummy_cnt; + int total_len; u32 packet_size_sum = r->offset; int index; int ret = TO_HOST_INVALID_PACKET; @@ -176,10 +176,10 @@ static int up_to_host(struct mux_rx *r) break; } - dummy_cnt = ALIGN(MUX_HEADER_SIZE + payload_size, 4); + total_len = ALIGN(MUX_HEADER_SIZE + payload_size, 4); if (len - packet_size_sum < - MUX_HEADER_SIZE + payload_size + dummy_cnt) { + total_len) { pr_err("invalid payload : %d %d %04x\n", payload_size, len, packet_type); break; @@ -202,7 +202,7 @@ static int up_to_host(struct mux_rx *r) break; } - packet_size_sum += MUX_HEADER_SIZE + payload_size + dummy_cnt; + packet_size_sum += total_len; if (len - packet_size_sum <= MUX_HEADER_SIZE + 2) { ret = r->callback(NULL, 0, @@ -361,7 +361,6 @@ static int gdm_mux_send(void *priv_dev, void *data, int len, int tty_index, struct mux_pkt_header *mux_header; struct mux_tx *t = NULL; static u32 seq_num = 1; - int dummy_cnt; int total_len; int ret; unsigned long flags; @@ -374,9 +373,7 @@ static int gdm_mux_send(void *priv_dev, void *data, int len, int tty_index, spin_lock_irqsave(&mux_dev->write_lock, flags); - dummy_cnt = ALIGN(MUX_HEADER_SIZE + len, 4); - - total_len = len + MUX_HEADER_SIZE + dummy_cnt; + total_len = ALIGN(MUX_HEADER_SIZE + len, 4); t = alloc_mux_tx(total_len); if (!t) { @@ -392,7 +389,8 @@ static int gdm_mux_send(void *priv_dev, void *data, int len, int tty_index, mux_header->packet_type = __cpu_to_le16(packet_type[tty_index]); memcpy(t->buf+MUX_HEADER_SIZE, data, len); - memset(t->buf+MUX_HEADER_SIZE+len, 0, dummy_cnt); + memset(t->buf+MUX_HEADER_SIZE+len, 0, total_len - MUX_HEADER_SIZE - + len); t->len = total_len; t->callback = cb; -- cgit v1.2.3-58-ga151 From 713276ea88a295a79aa6633ba639ed47692a8de4 Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Thu, 7 May 2015 18:22:18 -0300 Subject: iio: adc: cc10001: Fix incorrect use of power-up/power-down register At present we are incorrectly setting the register to 0x1 to power up the ADC. Since it is an active high power down register, we need to set the register to 0x0 to actually power up. Conversely, writing 0x1 to the register powers it down. This commit adds a couple of helpers to make the code clearer and then use them to do the power-up/power-down properly. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/cc10001_adc.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index 357e6c213784..e7810ac8e295 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -35,8 +35,9 @@ #define CC10001_ADC_EOC_SET BIT(0) #define CC10001_ADC_CHSEL_SAMPLED 0x0c -#define CC10001_ADC_POWER_UP 0x10 -#define CC10001_ADC_POWER_UP_SET BIT(0) +#define CC10001_ADC_POWER_DOWN 0x10 +#define CC10001_ADC_POWER_DOWN_SET BIT(0) + #define CC10001_ADC_DEBUG 0x14 #define CC10001_ADC_DATA_COUNT 0x20 @@ -78,6 +79,18 @@ static inline u32 cc10001_adc_read_reg(struct cc10001_adc_device *adc_dev, return readl(adc_dev->reg_base + reg); } +static void cc10001_adc_power_up(struct cc10001_adc_device *adc_dev) +{ + cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, 0); + ndelay(adc_dev->start_delay_ns); +} + +static void cc10001_adc_power_down(struct cc10001_adc_device *adc_dev) +{ + cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, + CC10001_ADC_POWER_DOWN_SET); +} + static void cc10001_adc_start(struct cc10001_adc_device *adc_dev, unsigned int channel) { @@ -139,11 +152,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) mutex_lock(&adc_dev->lock); - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, - CC10001_ADC_POWER_UP_SET); - - /* Wait for 8 (6+2) clock cycles before activating START */ - ndelay(adc_dev->start_delay_ns); + cc10001_adc_power_up(adc_dev); /* Calculate delay step for eoc and sampled data */ delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT; @@ -167,7 +176,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) } done: - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0); + cc10001_adc_power_down(adc_dev); mutex_unlock(&adc_dev->lock); @@ -186,11 +195,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev, unsigned int delay_ns; u16 val; - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, - CC10001_ADC_POWER_UP_SET); - - /* Wait for 8 (6+2) clock cycles before activating START */ - ndelay(adc_dev->start_delay_ns); + cc10001_adc_power_up(adc_dev); /* Calculate delay step for eoc and sampled data */ delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT; @@ -199,7 +204,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev, val = cc10001_adc_poll_done(indio_dev, chan->channel, delay_ns); - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0); + cc10001_adc_power_down(adc_dev); return val; } -- cgit v1.2.3-58-ga151 From 65a761bf8d55fdcf8ecc4642382a4e76c086e44c Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Thu, 7 May 2015 18:22:19 -0300 Subject: iio: adc: cc10001: Fix regulator_get_voltage() return value check regulator_get_voltage() returns a non-negative value in case of success, and a negative error in case of error. Let's fix this. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Signed-off-by: Jonathan Cameron --- drivers/iio/adc/cc10001_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index e7810ac8e295..fb7c5d2cc61a 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -230,7 +230,7 @@ static int cc10001_adc_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: ret = regulator_get_voltage(adc_dev->reg); - if (ret) + if (ret < 0) return ret; *val = ret / 1000; -- cgit v1.2.3-58-ga151 From f29b212edb9e253cafcb4a2ab7842a890989f1a5 Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Thu, 7 May 2015 18:22:20 -0300 Subject: iio: adc: cc10001: Add delay before setting START bit According to hardware team there should be some delay after setting channel number, start mode and before setting START. Add a one microsecond delay for this purpose. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/cc10001_adc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index fb7c5d2cc61a..115f6e99a7fa 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -100,6 +100,7 @@ static void cc10001_adc_start(struct cc10001_adc_device *adc_dev, val = (channel & CC10001_ADC_CH_MASK) | CC10001_ADC_MODE_SINGLE_CONV; cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val); + udelay(1); val = cc10001_adc_read_reg(adc_dev, CC10001_ADC_CONFIG); val = val | CC10001_ADC_START_CONV; cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val); -- cgit v1.2.3-58-ga151 From f0828ba96d02d4d4b197c531b34c662ee3c928df Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 7 May 2015 20:32:04 -0300 Subject: iio: light: hid-sensor-prox: Fix memory leak in probe() 'channels' is allocated via kmemdup and it is never freed. Use 'indio_dev->channels' directly instead, so that we avoid such memory leak problem. Reported-by: Alexey Khoroshilov Signed-off-by: Fabio Estevam Reviewed-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-prox.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index 88f21bbe947c..36a2de35e525 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -250,7 +250,6 @@ static int hid_prox_probe(struct platform_device *pdev) struct iio_dev *indio_dev; struct prox_state *prox_state; struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; - struct iio_chan_spec *channels; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct prox_state)); @@ -269,20 +268,21 @@ static int hid_prox_probe(struct platform_device *pdev) return ret; } - channels = kmemdup(prox_channels, sizeof(prox_channels), GFP_KERNEL); - if (!channels) { + indio_dev->channels = kmemdup(prox_channels, sizeof(prox_channels), + GFP_KERNEL); + if (!indio_dev->channels) { dev_err(&pdev->dev, "failed to duplicate channels\n"); return -ENOMEM; } - ret = prox_parse_report(pdev, hsdev, channels, + ret = prox_parse_report(pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, HID_USAGE_SENSOR_PROX, prox_state); if (ret) { dev_err(&pdev->dev, "failed to setup attributes\n"); goto error_free_dev_mem; } - indio_dev->channels = channels; indio_dev->num_channels = ARRAY_SIZE(prox_channels); indio_dev->dev.parent = &pdev->dev; -- cgit v1.2.3-58-ga151