From 3732b68f22857201fa09cb82b128f295096a2375 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Fri, 2 Apr 2010 17:56:08 +0200 Subject: m68knommu: fix coldfire tcdrain Fix tcdrain on coldfire uarts. Currently with coldfire uarts tcdrain returns without waiting for txempty, because (tx)fifosize is 0. Fix that and call uart_update_timeout when setting the baud rate, otherwise tcdrain will wait for an half our :) Also constify mcf_uart_ops. Signed-off-by: Philippe De Muyter Signed-off-by: Greg Ungerer --- drivers/serial/mcf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index 7bb5fee639e3..b9f7dfe6c5d5 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -263,6 +263,7 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, } spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); @@ -379,6 +380,7 @@ static irqreturn_t mcf_interrupt(int irq, void *data) static void mcf_config_port(struct uart_port *port, int flags) { port->type = PORT_MCF; + port->fifosize = MCFUART_TXFIFOSIZE; /* Clear mask, so no surprise interrupts. */ writeb(0, port->membase + MCFUART_UIMR); @@ -424,7 +426,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /* * Define the basic serial functions we support. */ -static struct uart_ops mcf_uart_ops = { +static const struct uart_ops mcf_uart_ops = { .tx_empty = mcf_tx_empty, .get_mctrl = mcf_get_mctrl, .set_mctrl = mcf_set_mctrl, -- cgit v1.2.3-58-ga151