From 75d886a9938432364ef1051f4f3d22d6d9788d8c Mon Sep 17 00:00:00 2001 From: Saurav Girepunje Date: Fri, 1 Nov 2019 18:05:03 +0530 Subject: scsi: ibmvscsi_tgt: Remove unneeded variable rc Variable rc is not modified in ibmvscsis_srp_i_logout function. So remove unneeded variable rc. Issue found using coccicheck tool. Link: https://lore.kernel.org/r/20191101120407.GA9369@saurav Signed-off-by: Saurav Girepunje Reviewed-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen --- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c index a929fe76102b..54b8c6f9daf4 100644 --- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c @@ -2354,7 +2354,6 @@ static long ibmvscsis_srp_i_logout(struct scsi_info *vscsi, { struct iu_entry *iue = cmd->iue; struct srp_i_logout *log_out = &vio_iu(iue)->srp.i_logout; - long rc = ADAPT_SUCCESS; if ((vscsi->debit > 0) || !list_empty(&vscsi->schedule_q) || !list_empty(&vscsi->waiting_rsp)) { @@ -2370,7 +2369,7 @@ static long ibmvscsis_srp_i_logout(struct scsi_info *vscsi, ibmvscsis_post_disconnect(vscsi, WAIT_IDLE, 0); } - return rc; + return ADAPT_SUCCESS; } /* Called with intr lock held */ -- cgit v1.2.3-58-ga151 From eede4970fb6c29f2056d7d016a3764c90e9d8a65 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 21 Nov 2019 09:55:56 -0800 Subject: scsi: lpfc: size cpu map by last cpu id set Currently the lpfc driver sizes its cpu_map array based on num_possible_cpus(). However, that can be a value that is less than the highest cpu id bit that is set. As such, if a thread runs on a cpu with a larger cpu id, or for_each_possible_cpu() is used, the driver could index off the end of the array and return garbage or GPF. The driver maintains its own internal copy of the "num_possible" cpu value and sizes arrays by it. Fix by setting the driver's value to the value of the last cpu id bit set in the possible_mask - plus 1. Thus cpu_map will be sized to allow access by any cpu id possible. Link: https://lore.kernel.org/r/20191121175556.18953-1-jsmart2021@gmail.com Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e9323889f199..cd83617354a1 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -6460,7 +6460,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) u32 if_fam; phba->sli4_hba.num_present_cpu = lpfc_present_cpu; - phba->sli4_hba.num_possible_cpu = num_possible_cpus(); + phba->sli4_hba.num_possible_cpu = cpumask_last(cpu_possible_mask) + 1; phba->sli4_hba.curr_disp_cpu = 0; lpfc_cpumask_of_node_init(phba); -- cgit v1.2.3-58-ga151 From 82ea3e0e129e2ab913dd6684bab7a6e5e9896dee Mon Sep 17 00:00:00 2001 From: John Garry Date: Wed, 20 Nov 2019 17:39:15 +0800 Subject: scsi: scsi_transport_sas: Fix memory leak when removing devices Removing a non-host rphy causes a memory leak: root@(none)$ echo 0 > /sys/devices/platform/HISI0162:01/host0/port-0:0/expander-0:0/port-0:0:10/phy-0:0:10/sas_phy/phy-0:0:10/enable [ 79.857888] hisi_sas_v2_hw HISI0162:01: dev[7:1] is gone root@(none)$ echo scan > /sys/kernel/debug/kmemleak [ 131.656603] kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) root@(none)$ more /sys/kernel/debug/kmemleak unreferenced object 0xffff041da5c66000 (size 256): comm "kworker/u128:1", pid 549, jiffies 4294898543 (age 113.728s) hex dump (first 32 bytes): 00 5e c6 a5 1d 04 ff ff 01 00 00 00 00 00 00 00 .^.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] kmem_cache_alloc+0x188/0x260 [<(____ptrval____)>] bsg_setup_queue+0x48/0x1a8 [<(____ptrval____)>] sas_rphy_add+0x108/0x2d0 [<(____ptrval____)>] sas_probe_devices+0x168/0x208 [<(____ptrval____)>] sas_discover_domain+0x660/0x9c8 [<(____ptrval____)>] process_one_work+0x3f8/0x690 [<(____ptrval____)>] worker_thread+0x70/0x6a0 [<(____ptrval____)>] kthread+0x1b8/0x1c0 [<(____ptrval____)>] ret_from_fork+0x10/0x18 unreferenced object 0xffff041d8c075400 (size 128): comm "kworker/u128:1", pid 549, jiffies 4294898543 (age 113.728s) hex dump (first 32 bytes): 00 40 25 97 1d 00 ff ff 00 00 00 00 00 00 00 00 .@%............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] __kmalloc_node+0x1a8/0x2c8 [<(____ptrval____)>] blk_mq_realloc_tag_set_tags.part.70+0x48/0xd8 [<(____ptrval____)>] blk_mq_alloc_tag_set+0x1dc/0x530 [<(____ptrval____)>] bsg_setup_queue+0xe8/0x1a8 [<(____ptrval____)>] sas_rphy_add+0x108/0x2d0 [<(____ptrval____)>] sas_probe_devices+0x168/0x208 [<(____ptrval____)>] sas_discover_domain+0x660/0x9c8 [<(____ptrval____)>] process_one_work+0x3f8/0x690 [<(____ptrval____)>] worker_thread+0x70/0x6a0 [<(____ptrval____)>] kthread+0x1b8/0x1c0 [<(____ptrval____)>] ret_from_fork+0x10/0x18 unreferenced object 0xffff041da5c65e00 (size 256): comm "kworker/u128:1", pid 549, jiffies 4294898543 (age 113.728s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] __kmalloc_node+0x1a8/0x2c8 [<(____ptrval____)>] blk_mq_alloc_tag_set+0x254/0x530 [<(____ptrval____)>] bsg_setup_queue+0xe8/0x1a8 [<(____ptrval____)>] sas_rphy_add+0x108/0x2d0 [<(____ptrval____)>] sas_probe_devices+0x168/0x208 [<(____ptrval____)>] sas_discover_domain+0x660/0x9c8 [<(____ptrval____)>] process_one_work+0x3f8/0x690 [<(____ptrval____)>] worker_thread+0x70/0x6a0 [<(____ptrval____)>] kthread+0x1b8/0x1c0 [<(____ptrval____)>] ret_from_fork+0x10/0x18 root@(none)$ It turns out that we don't clean up the request queue fully for bsg devices, as the blk mq tags for the request queue are not freed. Fix by doing the queue removal in one place - in sas_rphy_remove() - instead of unregistering the queue in sas_rphy_remove() and finally cleaning up the queue in calling blk_cleanup_queue() from sas_end_device_release() or sas_expander_release(). Function bsg_remove_queue() can handle a NULL pointer q, so remove the precheck in sas_rphy_remove(). Fixes: 651a013649943 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough") Link: https://lore.kernel.org/r/1574242755-94156-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_sas.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index ef138c57e2a6..182fd25c7c43 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -1391,9 +1391,6 @@ static void sas_expander_release(struct device *dev) struct sas_rphy *rphy = dev_to_rphy(dev); struct sas_expander_device *edev = rphy_to_expander_device(rphy); - if (rphy->q) - blk_cleanup_queue(rphy->q); - put_device(dev->parent); kfree(edev); } @@ -1403,9 +1400,6 @@ static void sas_end_device_release(struct device *dev) struct sas_rphy *rphy = dev_to_rphy(dev); struct sas_end_device *edev = rphy_to_end_device(rphy); - if (rphy->q) - blk_cleanup_queue(rphy->q); - put_device(dev->parent); kfree(edev); } @@ -1634,8 +1628,7 @@ sas_rphy_remove(struct sas_rphy *rphy) } sas_rphy_unlink(rphy); - if (rphy->q) - bsg_unregister_queue(rphy->q); + bsg_remove_queue(rphy->q); transport_remove_device(dev); device_del(dev); } -- cgit v1.2.3-58-ga151 From 0e7c353e1828819eb92af0a64fc9b2f4f778b76e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 20 Nov 2019 13:50:31 +0000 Subject: scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 The condition (reg_val != 2) || (reg_val != 3) will always be true because reg_val cannot be equal to two different values at the same time. Fix this by replacing the || operator with && so that the loop will loop if reg_val is not a 2 and not a 3 as was originally intended. Fixes: 50dc2f221455 ("scsi: pm80xx: Modified the logic to collect fatal dump") Link: https://lore.kernel.org/r/20191120135031.270708-1-colin.king@canonical.com Addresses-Coverity: ("Constant expression result") Signed-off-by: Colin Ian King Acked-by: Jack Wang Signed-off-by: Martin K. Petersen --- drivers/scsi/pm8001/pm80xx_hwi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 19601138e889..d41908b23760 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -348,7 +348,7 @@ moreData: do { reg_val = pm8001_mr32(fatal_table_address, MPI_FATAL_EDUMP_TABLE_STATUS); - } while (((reg_val != 2) || (reg_val != 3)) && + } while (((reg_val != 2) && (reg_val != 3)) && time_before(jiffies, start)); if (reg_val < 2) { -- cgit v1.2.3-58-ga151 From 69b41f141dc4e465e2f5e98efa3b38f022dfbd4a Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 22 Nov 2019 02:09:11 +0000 Subject: scsi: pm80xx: Remove unused include of linux/version.h Remove #include . Don't need it. Link: https://lore.kernel.org/r/20191122020911.33269-1-yuehaibing@huawei.com Signed-off-by: YueHaibing Acked-by: Jack Wang Signed-off-by: Martin K. Petersen --- drivers/scsi/pm8001/pm80xx_hwi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index d41908b23760..98dcdbd146d5 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -37,7 +37,6 @@ * POSSIBILITY OF SUCH DAMAGES. * */ - #include #include #include "pm8001_sas.h" #include "pm80xx_hwi.h" -- cgit v1.2.3-58-ga151 From d341e9a8f2cffe4000c610225c629f62c7489c74 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Fri, 22 Nov 2019 22:19:22 +0000 Subject: scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan In qla2x00_find_all_fabric_devs(), fcport->flags & FCF_LOGIN_NEEDED is a necessary condition for logging into new rports, but not for dropping lost ones. Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Link: https://lore.kernel.org/r/20191122221912.20100-2-martin.wilck@suse.com Tested-by: David Bond Signed-off-by: Martin Wilck Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 1dbee8800218..6c28f38f8021 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -5898,8 +5898,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha) if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) break; - if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 || - (fcport->flags & FCF_LOGIN_NEEDED) == 0) + if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) continue; if (fcport->scan_state == QLA_FCPORT_SCAN) { @@ -5922,7 +5921,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha) } } - if (fcport->scan_state == QLA_FCPORT_FOUND) + if (fcport->scan_state == QLA_FCPORT_FOUND && + (fcport->flags & FCF_LOGIN_NEEDED) != 0) qla24xx_fcport_handle_login(vha, fcport); } return (rval); -- cgit v1.2.3-58-ga151 From c8a347931869bf4373bfd4036d297b8e11ab48ab Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Fri, 22 Nov 2019 22:19:24 +0000 Subject: scsi: qla2xxx: unregister ports after GPN_FT failure When ports are lost due to unzoning them, and the initiator port is not part of any more zones, the GPN_FT command used for the fabric scan may fail. In this case, the current code simply gives up after a few retries. But if the zone is gone, all rports should actually be marked as lost. Fix this by jumping to the code that handles logout after GNN_FT after scan retries are exhausted. Fixes: f352eeb75419 ("scsi: qla2xxx: Add ability to use GPNFT/GNNFT for RSCN handling") Link: https://lore.kernel.org/r/20191122221912.20100-3-martin.wilck@suse.com Tested-by: Jason Orendorf Signed-off-by: Martin Wilck Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_gs.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 67230688b05e..446a9d6ba255 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -3587,12 +3587,23 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp) if (vha->scan.scan_retry < MAX_SCAN_RETRIES) { set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); + goto out; } else { - ql_dbg(ql_dbg_disc + ql_dbg_verbose, vha, 0xffff, + ql_dbg(ql_dbg_disc, vha, 0xffff, "%s: Fabric scan failed for %d retries.\n", __func__, vha->scan.scan_retry); + /* + * Unable to scan any rports. logout loop below + * will unregister all sessions. + */ + list_for_each_entry(fcport, &vha->vp_fcports, list) { + if ((fcport->flags & FCF_FABRIC_DEVICE) != 0) { + fcport->scan_state = QLA_FCPORT_SCAN; + fcport->logout_on_delete = 0; + } + } + goto login_logout; } - goto out; } vha->scan.scan_retry = 0; @@ -3670,6 +3681,7 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp) dup_cnt); } +login_logout: /* * Logout all previous fabric dev marked lost, except FCP2 devices. */ -- cgit v1.2.3-58-ga151 From 45dc8f2d9c94ed74a5e31e63e9136a19a7e16081 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Thu, 21 Nov 2019 13:40:47 +0800 Subject: scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI Commit 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/ pci_free_irq_vectors calls.") use pci_alloc_irq_vectors() to replace pci_enable_msi() but it didn't handle the return value correctly. This bug make qla2x00 always fail to setup MSI if MSI-X fail, so fix it. BTW, improve the log message of return value in qla2x00_request_irqs() to avoid confusion. Fixes: 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.") Cc: Michael Hernandez Link: https://lore.kernel.org/r/1574314847-14280-1-git-send-email-chenhc@lemote.com Signed-off-by: Huacai Chen Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_isr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 1b8f297449cf..2601d7673c37 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -3650,7 +3650,7 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp) skip_msix: ql_log(ql_log_info, vha, 0x0037, - "Falling back-to MSI mode -%d.\n", ret); + "Falling back-to MSI mode -- ret=%d.\n", ret); if (!IS_QLA24XX(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) && !IS_QLA8001(ha) && !IS_P3P_TYPE(ha) && !IS_QLAFX00(ha) && @@ -3658,13 +3658,13 @@ skip_msix: goto skip_msi; ret = pci_alloc_irq_vectors(ha->pdev, 1, 1, PCI_IRQ_MSI); - if (!ret) { + if (ret > 0) { ql_dbg(ql_dbg_init, vha, 0x0038, "MSI: Enabled.\n"); ha->flags.msi_enabled = 1; } else ql_log(ql_log_warn, vha, 0x0039, - "Falling back-to INTa mode -- %d.\n", ret); + "Falling back-to INTa mode -- ret=%d.\n", ret); skip_msi: /* Skip INTx on ISP82xx. */ -- cgit v1.2.3-58-ga151 From a35989a0723c53b0364322e39c7a9495336ff7e6 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Mon, 25 Nov 2019 16:05:18 +0900 Subject: scsi: sd_zbc: Improve report zones error printout In the case of a report zones command failure, instead of simply printing the host_byte and driver_byte values returned, print a message that is more human readable and useful, adding sense codes too. To do so, use the already defined sd_print_sense_hdr() and sd_print_result() functions by moving the declaration of these functions into sd.h. Link: https://lore.kernel.org/r/20191125070518.951717-1-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 9 ++------- drivers/scsi/sd.h | 3 +++ drivers/scsi/sd_zbc.c | 8 +++++--- 3 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 326e2877f169..93edccb1a737 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -122,8 +122,6 @@ static void sd_eh_reset(struct scsi_cmnd *); static int sd_eh_action(struct scsi_cmnd *, int); static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer); static void scsi_disk_release(struct device *cdev); -static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *); -static void sd_print_result(const struct scsi_disk *, const char *, int); static DEFINE_IDA(sd_index_ida); @@ -3704,15 +3702,13 @@ static void __exit exit_sd(void) module_init(init_sd); module_exit(exit_sd); -static void sd_print_sense_hdr(struct scsi_disk *sdkp, - struct scsi_sense_hdr *sshdr) +void sd_print_sense_hdr(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr) { scsi_print_sense_hdr(sdkp->device, sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr); } -static void sd_print_result(const struct scsi_disk *sdkp, const char *msg, - int result) +void sd_print_result(const struct scsi_disk *sdkp, const char *msg, int result) { const char *hb_string = scsi_hostbyte_string(result); const char *db_string = scsi_driverbyte_string(result); @@ -3727,4 +3723,3 @@ static void sd_print_result(const struct scsi_disk *sdkp, const char *msg, "%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n", msg, host_byte(result), driver_byte(result)); } - diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 1eab779f812b..43dc0228f1ce 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -239,4 +239,7 @@ static inline void sd_zbc_complete(struct scsi_cmnd *cmd, #endif /* CONFIG_BLK_DEV_ZONED */ +void sd_print_sense_hdr(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr); +void sd_print_result(const struct scsi_disk *sdkp, const char *msg, int result); + #endif /* _SCSI_DISK_H */ diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index de4019dc0f0b..71db972bf71f 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -87,9 +87,11 @@ static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf, timeout, SD_MAX_RETRIES, NULL); if (result) { sd_printk(KERN_ERR, sdkp, - "REPORT ZONES lba %llu failed with %d/%d\n", - (unsigned long long)lba, - host_byte(result), driver_byte(result)); + "REPORT ZONES start lba %llu failed\n", lba); + sd_print_result(sdkp, "REPORT ZONES", result); + if (driver_byte(result) == DRIVER_SENSE && + scsi_sense_valid(&sshdr)) + sd_print_sense_hdr(sdkp, &sshdr); return -EIO; } -- cgit v1.2.3-58-ga151 From 73374b39b01e91b90ff683dc259b89f528c4f367 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Mon, 25 Nov 2019 22:44:54 +0800 Subject: scsi: megaraid_sas: Make poll_aen_lock static Fix sparse warning: drivers/scsi/megaraid/megaraid_sas_base.c:187:12: warning: symbol 'poll_aen_lock' was not declared. Should it be static? Link: https://lore.kernel.org/r/20191125144454.22680-1-yuehaibing@huawei.com Reported-by: Hulk Robot Signed-off-by: YueHaibing Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index c40fbea06cc5..a4bc81479284 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -199,7 +199,7 @@ static bool support_nvme_encapsulation; static bool support_pci_lane_margining; /* define lock for aen poll */ -spinlock_t poll_aen_lock; +static spinlock_t poll_aen_lock; extern struct dentry *megasas_debugfs_root; extern void megasas_init_debugfs(void); -- cgit v1.2.3-58-ga151