From bc5d81b8012ce51e0ed137500d92c6b146e45732 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Wed, 13 Mar 2024 09:19:32 +0000 Subject: usb: dwc2: Add new parameter eusb2_disc Added new parameter eusb2_disc to list of core parameters which specify whether eUSB2 PHY disconnect support flow applicable or no. Set to false as default value and checked core version if set to true. This parameter applicable in device mode of HSOTG and HS IOT cores v5.00 or higher. Added print this parameter in show parameters of debugfs. Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/e77cc4312bda797d1ddaa4351d86c65a69c8b926.1708948356.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/core.h | 6 ++++++ drivers/usb/dwc2/debugfs.c | 1 + drivers/usb/dwc2/params.c | 22 ++++++++++++++++++++++ 3 files changed, 29 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 0c10bd0c32fd..16d6ac97f23b 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -288,6 +288,11 @@ enum dwc2_ep0_state { * core has been configured to work at either data path * width. * 8 or 16 (default 16 if available) + * @eusb2_disc: Specifies whether eUSB2 PHY disconnect support flow + * applicable or no. Applicable in device mode of HSOTG + * and HS IOT cores v5.00 or higher. + * 0 - eUSB2 PHY disconnect support flow not applicable + * 1 - eUSB2 PHY disconnect support flow applicable * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single * data rate. This parameter is only applicable if phy_type * is ULPI. @@ -442,6 +447,7 @@ struct dwc2_core_params { #define DWC2_SPEED_PARAM_LOW 2 u8 phy_utmi_width; + bool eusb2_disc; bool phy_ulpi_ddr; bool phy_ulpi_ext_vbus; bool enable_dynamic_fifo; diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c index 1d72ece9cfe4..7c82ab590401 100644 --- a/drivers/usb/dwc2/debugfs.c +++ b/drivers/usb/dwc2/debugfs.c @@ -686,6 +686,7 @@ static int params_show(struct seq_file *seq, void *v) print_param(seq, p, host_channels); print_param(seq, p, phy_type); print_param(seq, p, phy_utmi_width); + print_param(seq, p, eusb2_disc); print_param(seq, p, phy_ulpi_ddr); print_param(seq, p, phy_ulpi_ext_vbus); print_param(seq, p, i2c_enable); diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index eb677c3cfd0b..c47524483f48 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -475,6 +475,7 @@ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) dwc2_set_param_lpm(hsotg); p->phy_ulpi_ddr = false; p->phy_ulpi_ext_vbus = false; + p->eusb2_disc = false; p->enable_dynamic_fifo = hw->enable_dynamic_fifo; p->en_multiple_tx_fifo = hw->en_multiple_tx_fifo; @@ -737,6 +738,25 @@ static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) } } +static void dwc2_check_param_eusb2_disc(struct dwc2_hsotg *hsotg) +{ + u32 gsnpsid; + + if (!hsotg->params.eusb2_disc) + return; + gsnpsid = dwc2_readl(hsotg, GSNPSID); + /* + * eusb2_disc not supported by FS IOT devices. + * For other cores, it supported starting from version 5.00a + */ + if ((gsnpsid & ~DWC2_CORE_REV_MASK) == DWC2_FS_IOT_ID || + (gsnpsid & DWC2_CORE_REV_MASK) < + (DWC2_CORE_REV_5_00a & DWC2_CORE_REV_MASK)) { + hsotg->params.eusb2_disc = false; + return; + } +} + #define CHECK_RANGE(_param, _min, _max, _def) do { \ if ((int)(hsotg->params._param) < (_min) || \ (hsotg->params._param) > (_max)) { \ @@ -765,6 +785,8 @@ static void dwc2_check_params(struct dwc2_hsotg *hsotg) dwc2_check_param_speed(hsotg); dwc2_check_param_phy_utmi_width(hsotg); dwc2_check_param_power_down(hsotg); + dwc2_check_param_eusb2_disc(hsotg); + CHECK_BOOL(enable_dynamic_fifo, hw->enable_dynamic_fifo); CHECK_BOOL(en_multiple_tx_fifo, hw->en_multiple_tx_fifo); CHECK_BOOL(i2c_enable, hw->i2c_enable); -- cgit v1.2.3-58-ga151