From 9962444f592a53c08ce439b6dc362bba7ce5fd7e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 1 Sep 2011 22:26:25 +0300 Subject: usb: dwc3: omap: distinguish between SW and HW modes The OMAP wrapper allows us to either control internal OTG signals via SW or HW. Different boards might wish to use one or the other mode of operation. Let's have have that information passed via platform_data for now. After DT conversion is finished for OMAP, we can easily convert this to a DT attribute. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-omap.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/usb/dwc3') diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 17d1822f7687..ddbf38a94017 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -193,6 +194,7 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) static int __devinit dwc3_omap_probe(struct platform_device *pdev) { + struct dwc3_omap_data *pdata = pdev->dev.platform_data; struct platform_device *dwc3; struct dwc3_omap *omap; struct resource *res; @@ -258,6 +260,26 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) omap->base = base; omap->dwc3 = dwc3; + reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + + if (!pdata) { + dev_dbg(&pdev->dev, "missing platform data\n"); + } else { + switch (pdata->utmi_mode) { + case DWC3_OMAP_UTMI_MODE_SW: + reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + case DWC3_OMAP_UTMI_MODE_HW: + reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + default: + dev_dbg(&pdev->dev, "UNKNOWN utmi mode %d\n", + pdata->utmi_mode); + } + } + + dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); + /* check the DMA Status */ reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG); omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); -- cgit v1.2.3-58-ga151