From 32f47179833b63de72427131169809065db6745e Mon Sep 17 00:00:00 2001 From: Aditya Pakki Date: Mon, 18 Mar 2019 18:50:56 -0500 Subject: serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference of_match_device on failure to find a matching device can return a NULL pointer. The patch checks for such a scenrio and passes the error upstream. Signed-off-by: Aditya Pakki Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mvebu-uart.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 231f751d1ef4..7e7b1559fa36 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -810,6 +810,9 @@ static int mvebu_uart_probe(struct platform_device *pdev) return -EINVAL; } + if (!match) + return -ENODEV; + /* Assume that all UART ports have a DT alias or none has */ id = of_alias_get_id(pdev->dev.of_node, "serial"); if (!pdev->dev.of_node || id < 0) -- cgit v1.2.3-58-ga151 From 3a10e3dd52e80b9a97a3346020024d17b2c272d6 Mon Sep 17 00:00:00 2001 From: Aditya Pakki Date: Mon, 18 Mar 2019 18:44:14 -0500 Subject: serial: max310x: Fix to avoid potential NULL pointer dereference of_match_device can return a NULL pointer when matching device is not found. This patch avoids a scenario causing NULL pointer derefernce. Signed-off-by: Aditya Pakki Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/max310x.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index f5bdde405627..450ba6d7996c 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1415,6 +1415,8 @@ static int max310x_spi_probe(struct spi_device *spi) if (spi->dev.of_node) { const struct of_device_id *of_id = of_match_device(max310x_dt_ids, &spi->dev); + if (!of_id) + return -ENODEV; devtype = (struct max310x_devtype *)of_id->data; } else { -- cgit v1.2.3-58-ga151 From c85be041065c0be8bc48eda4c45e0319caf1d0e5 Mon Sep 17 00:00:00 2001 From: Kangjie Lu Date: Fri, 15 Mar 2019 12:16:06 -0500 Subject: tty: atmel_serial: fix a potential NULL pointer dereference In case dmaengine_prep_dma_cyclic fails, the fix returns a proper error code to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu Fixes: 34df42f59a60 ("serial: at91: add rx dma support") Acked-by: Richard Genoud Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 05147fe24343..41b728d223d1 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1288,6 +1288,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port) sg_dma_len(&atmel_port->sg_rx)/2, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(port->dev, "Preparing DMA cyclic failed\n"); + goto chan_err; + } desc->callback = atmel_complete_rx_dma; desc->callback_param = port; atmel_port->desc_rx = desc; -- cgit v1.2.3-58-ga151 From 6734330654dac550f12e932996b868c6d0dcb421 Mon Sep 17 00:00:00 2001 From: Kangjie Lu Date: Thu, 14 Mar 2019 02:21:51 -0500 Subject: tty: mxs-auart: fix a potential NULL pointer dereference In case ioremap fails, the fix returns -ENOMEM to avoid NULL pointer dereferences. Multiple places use port.membase. Signed-off-by: Kangjie Lu Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 27235a526cce..4c188f4079b3 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1686,6 +1686,10 @@ static int mxs_auart_probe(struct platform_device *pdev) s->port.mapbase = r->start; s->port.membase = ioremap(r->start, resource_size(r)); + if (!s->port.membase) { + ret = -ENOMEM; + goto out_disable_clks; + } s->port.ops = &mxs_auart_ops; s->port.iotype = UPIO_MEM; s->port.fifosize = MXS_AUART_FIFO_SIZE; -- cgit v1.2.3-58-ga151 From ac0cdb3d990108df795b676cd0d0e65ac34b2273 Mon Sep 17 00:00:00 2001 From: Mao Wenan Date: Fri, 8 Mar 2019 22:08:31 +0800 Subject: sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() Add the missing uart_unregister_driver() and i2c_del_driver() before return from sc16is7xx_init() in the error handling case. Signed-off-by: Mao Wenan Reviewed-by: Vladimir Zapolskiy Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sc16is7xx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 635178cf3eed..09a183dfc526 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1507,7 +1507,7 @@ static int __init sc16is7xx_init(void) ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver); if (ret < 0) { pr_err("failed to init sc16is7xx i2c --> %d\n", ret); - return ret; + goto err_i2c; } #endif @@ -1515,10 +1515,18 @@ static int __init sc16is7xx_init(void) ret = spi_register_driver(&sc16is7xx_spi_uart_driver); if (ret < 0) { pr_err("failed to init sc16is7xx spi --> %d\n", ret); - return ret; + goto err_spi; } #endif return ret; + +err_spi: +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C + i2c_del_driver(&sc16is7xx_i2c_uart_driver); +#endif +err_i2c: + uart_unregister_driver(&sc16is7xx_uart); + return ret; } module_init(sc16is7xx_init); -- cgit v1.2.3-58-ga151 From c5cbc78acf693f5605d4a85b1327fa7933daf092 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 8 Mar 2019 11:37:44 -0700 Subject: tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup When building with -Wsometimes-uninitialized, Clang warns: drivers/tty/serial/qcom_geni_serial.c:1079:6: warning: variable 'baud' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] It's not wrong; when options is NULL, baud has no default value. Use 9600 as that is a sane default. Link: https://github.com/ClangBuiltLinux/linux/issues/395 Suggested-by: Greg Kroah-Hartman Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/qcom_geni_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 3bcec1c20219..35e5f9c5d5be 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1050,7 +1050,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options) { struct uart_port *uport; struct qcom_geni_serial_port *port; - int baud; + int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; -- cgit v1.2.3-58-ga151 From 72ff51d8dd262d1fef25baedc2ac35116435be47 Mon Sep 17 00:00:00 2001 From: Petr Štetiar Date: Wed, 6 Mar 2019 17:54:03 +0100 Subject: serial: ar933x_uart: Fix build failure with disabled console MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Andrey has reported on OpenWrt's bug tracking system[1], that he currently can't use ar93xx_uart as pure serial UART without console (CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined), because compilation ends with following error: ar933x_uart.c: In function 'ar933x_uart_console_write': ar933x_uart.c:550:14: error: 'struct uart_port' has no member named 'sysrq' So this patch moves all the code related to console handling behind series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2152 Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Andrey Batyiev Reported-by: Andrey Batyiev Tested-by: Andrey Batyiev Signed-off-by: Petr Štetiar Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ar933x_uart.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index db5df3d54818..3bdd56a1021b 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -49,11 +49,6 @@ struct ar933x_uart_port { struct clk *clk; }; -static inline bool ar933x_uart_console_enabled(void) -{ - return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE); -} - static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, int offset) { @@ -508,6 +503,7 @@ static const struct uart_ops ar933x_uart_ops = { .verify_port = ar933x_uart_verify_port, }; +#ifdef CONFIG_SERIAL_AR933X_CONSOLE static struct ar933x_uart_port * ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; @@ -604,14 +600,7 @@ static struct console ar933x_uart_console = { .index = -1, .data = &ar933x_uart_driver, }; - -static void ar933x_uart_add_console_port(struct ar933x_uart_port *up) -{ - if (!ar933x_uart_console_enabled()) - return; - - ar933x_console_ports[up->port.line] = up; -} +#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ static struct uart_driver ar933x_uart_driver = { .owner = THIS_MODULE, @@ -700,7 +689,9 @@ static int ar933x_uart_probe(struct platform_device *pdev) baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP); up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD); - ar933x_uart_add_console_port(up); +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + ar933x_console_ports[up->port.line] = up; +#endif ret = uart_add_one_port(&ar933x_uart_driver, &up->port); if (ret) @@ -749,8 +740,9 @@ static int __init ar933x_uart_init(void) { int ret; - if (ar933x_uart_console_enabled()) - ar933x_uart_driver.cons = &ar933x_uart_console; +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + ar933x_uart_driver.cons = &ar933x_uart_console; +#endif ret = uart_register_driver(&ar933x_uart_driver); if (ret) -- cgit v1.2.3-58-ga151 From 93bcefd4c6bad4c69dbc4edcd3fbf774b24d930d Mon Sep 17 00:00:00 2001 From: Hoan Nguyen An Date: Mon, 18 Mar 2019 18:26:32 +0900 Subject: serial: sh-sci: Fix setting SCSCR_TIE while transferring data We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted (if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer, re-enable the SCSCR_TIE bit, which was done at sci_start_tx(). This is unnecessary processing, wasting CPU operation if the data transmission length is large. And further, transmit end, FIFO empty bits disabling have also been performed in the step above. Signed-off-by: Hoan Nguyen An Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 060fcd42b6d5..2d1c626312cd 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -838,19 +838,9 @@ static void sci_transmit_chars(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_empty(xmit)) { + if (uart_circ_empty(xmit)) sci_stop_tx(port); - } else { - ctrl = serial_port_in(port, SCSCR); - - if (port->type != PORT_SCI) { - serial_port_in(port, SCxSR); /* Dummy read */ - sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port)); - } - ctrl |= SCSCR_TIE; - serial_port_out(port, SCSCR, ctrl); - } } /* On SH3, SCIF may read end-of-break as a space->mark char */ -- cgit v1.2.3-58-ga151 From f3040983132bf3477acd45d2452a906e67c2fec9 Mon Sep 17 00:00:00 2001 From: Razvan Stefanescu Date: Tue, 19 Mar 2019 15:20:34 +0200 Subject: tty/serial: atmel: Add is_half_duplex helper Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable Signed-off-by: Razvan Stefanescu Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 41b728d223d1..55ca3416113f 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -231,6 +231,13 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value) __raw_writeb(value, port->membase + ATMEL_US_THR); } +static inline int atmel_uart_is_half_duplex(struct uart_port *port) +{ + return ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || + (port->iso7816.flags & SER_ISO7816_ENABLED); +} + #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { @@ -608,10 +615,9 @@ static void atmel_stop_tx(struct uart_port *port) /* Disable interrupts */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); - if (((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || - port->iso7816.flags & SER_ISO7816_ENABLED) + if (atmel_uart_is_half_duplex(port)) atmel_start_rx(port); + } /* @@ -628,9 +634,7 @@ static void atmel_start_tx(struct uart_port *port) return; if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port)) - if (((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || - port->iso7816.flags & SER_ISO7816_ENABLED) + if (atmel_uart_is_half_duplex(port)) atmel_stop_rx(port); if (atmel_use_pdc_tx(port)) @@ -928,9 +932,7 @@ static void atmel_complete_tx_dma(void *arg) */ if (!uart_circ_empty(xmit)) atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); - else if (((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || - port->iso7816.flags & SER_ISO7816_ENABLED) { + else if (atmel_uart_is_half_duplex(port)) { /* DMA done, stop TX, start RX for RS485 */ atmel_start_rx(port); } @@ -1512,9 +1514,7 @@ static void atmel_tx_pdc(struct uart_port *port) atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); } else { - if (((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || - port->iso7816.flags & SER_ISO7816_ENABLED) { + if (atmel_uart_is_half_duplex(port)) { /* DMA done, stop TX, start RX for RS485 */ atmel_start_rx(port); } -- cgit v1.2.3-58-ga151 From 69646d7a3689fbe1a65ae90397d22ac3f1b8d40f Mon Sep 17 00:00:00 2001 From: Razvan Stefanescu Date: Tue, 19 Mar 2019 15:20:35 +0200 Subject: tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped In half-duplex operation, RX should be started after TX completes. If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet. Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by: Razvan Stefanescu Acked-by: Richard Genoud Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 55ca3416113f..0b4f36905321 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -166,6 +166,8 @@ struct atmel_uart_port { unsigned int pending_status; spinlock_t lock_suspended; + bool hd_start_rx; /* can start RX during half-duplex operation */ + /* ISO7816 */ unsigned int fidi_min; unsigned int fidi_max; @@ -933,8 +935,13 @@ static void atmel_complete_tx_dma(void *arg) if (!uart_circ_empty(xmit)) atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); else if (atmel_uart_is_half_duplex(port)) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); + /* + * DMA done, re-enable TXEMPTY and signal that we can stop + * TX and start RX for RS485 + */ + atmel_port->hd_start_rx = true; + atmel_uart_writel(port, ATMEL_US_IER, + atmel_port->tx_done_mask); } spin_unlock_irqrestore(&port->lock, flags); @@ -1382,9 +1389,20 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending) struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); if (pending & atmel_port->tx_done_mask) { - /* Either PDC or interrupt transmission */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); + + /* Start RX if flag was set and FIFO is empty */ + if (atmel_port->hd_start_rx) { + if (!(atmel_uart_readl(port, ATMEL_US_CSR) + & ATMEL_US_TXEMPTY)) + dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n"); + + atmel_port->hd_start_rx = false; + atmel_start_rx(port); + return; + } + atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); } } -- cgit v1.2.3-58-ga151 From 3ec8002951ea173e24b466df1ea98c56b7920e63 Mon Sep 17 00:00:00 2001 From: Wentao Wang Date: Wed, 20 Mar 2019 15:30:39 +0000 Subject: Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Signed-off-by: Wentao Wang Cc: stable Acked-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/kgdboc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index 6fb312e7af71..bfe5e9e034ec 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -148,8 +148,10 @@ static int configure_kgdboc(void) char *cptr = config; struct console *cons; - if (!strlen(config) || isspace(config[0])) + if (!strlen(config) || isspace(config[0])) { + err = 0; goto noconfig; + } kgdboc_io_ops.is_console = 0; kgdb_tty_driver = NULL; -- cgit v1.2.3-58-ga151 From f4e68d58cf2b20a581759bbc7228052534652673 Mon Sep 17 00:00:00 2001 From: Fabien Dessenne Date: Thu, 21 Mar 2019 16:43:26 +0100 Subject: tty: fix NULL pointer issue when tty_port ops is not set Unlike 'client_ops' which is initialized to 'default_client_ops', the port operations 'ops' may be left to NULL. Check the 'ops' value before checking the 'ops->x' value. Signed-off-by: Fabien Dessenne Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_port.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 044c3cbdcfa4..a9e12b3bc31d 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -325,7 +325,7 @@ static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty) if (tty && C_HUPCL(tty)) tty_port_lower_dtr_rts(port); - if (port->ops->shutdown) + if (port->ops && port->ops->shutdown) port->ops->shutdown(port); } out: @@ -398,7 +398,7 @@ EXPORT_SYMBOL_GPL(tty_port_tty_wakeup); */ int tty_port_carrier_raised(struct tty_port *port) { - if (port->ops->carrier_raised == NULL) + if (!port->ops || !port->ops->carrier_raised) return 1; return port->ops->carrier_raised(port); } @@ -414,7 +414,7 @@ EXPORT_SYMBOL(tty_port_carrier_raised); */ void tty_port_raise_dtr_rts(struct tty_port *port) { - if (port->ops->dtr_rts) + if (port->ops && port->ops->dtr_rts) port->ops->dtr_rts(port, 1); } EXPORT_SYMBOL(tty_port_raise_dtr_rts); @@ -429,7 +429,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts); */ void tty_port_lower_dtr_rts(struct tty_port *port) { - if (port->ops->dtr_rts) + if (port->ops && port->ops->dtr_rts) port->ops->dtr_rts(port, 0); } EXPORT_SYMBOL(tty_port_lower_dtr_rts); @@ -684,7 +684,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, if (!tty_port_initialized(port)) { clear_bit(TTY_IO_ERROR, &tty->flags); - if (port->ops->activate) { + if (port->ops && port->ops->activate) { int retval = port->ops->activate(port, tty); if (retval) { mutex_unlock(&port->mutex); -- cgit v1.2.3-58-ga151