From 093a9e2a20ebc414f8ca0d31709dab1040fa2886 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 31 Dec 2013 20:49:42 +0400 Subject: serial: clps711x: Enable driver compilation with COMPILE_TEST This helps increasing build testing coverage. To do this, read{write}_relaxed() functions was be replaced with simple read{write}() variants. Potential "uninitialized variable" warnings was be fixed if driver compiled without MFD_SYSCON. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 3 +-- drivers/tty/serial/clps711x.c | 40 ++++++++++++++++++++++------------------ 2 files changed, 23 insertions(+), 20 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 7fbbbadea2dd..441ada489874 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -181,9 +181,8 @@ config SERIAL_KS8695_CONSOLE config SERIAL_CLPS711X tristate "CLPS711X serial port support" - depends on ARCH_CLPS711X + depends on ARCH_CLPS711X || COMPILE_TEST select SERIAL_CORE - default y help This enables the driver for the on-chip UARTs of the Cirrus Logic EP711x/EP721x/EP731x processors. diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index 5a931f97aa7c..b0eacb83f831 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -99,15 +99,16 @@ static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id) struct uart_port *port = dev_id; struct clps711x_port *s = dev_get_drvdata(port->dev); unsigned int status, flg; - u32 sysflg; u16 ch; for (;;) { + u32 sysflg = 0; + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); if (sysflg & SYSFLG_URXFE) break; - ch = readw_relaxed(port->membase + UARTDR_OFFSET); + ch = readw(port->membase + UARTDR_OFFSET); status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR); ch &= 0xff; @@ -151,10 +152,9 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) struct uart_port *port = dev_id; struct clps711x_port *s = dev_get_drvdata(port->dev); struct circ_buf *xmit = &port->state->xmit; - u32 sysflg; if (port->x_char) { - writew_relaxed(port->x_char, port->membase + UARTDR_OFFSET); + writew(port->x_char, port->membase + UARTDR_OFFSET); port->icount.tx++; port->x_char = 0; return IRQ_HANDLED; @@ -169,8 +169,9 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) } while (!uart_circ_empty(xmit)) { - writew_relaxed(xmit->buf[xmit->tail], - port->membase + UARTDR_OFFSET); + u32 sysflg = 0; + + writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; @@ -188,7 +189,7 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) static unsigned int uart_clps711x_tx_empty(struct uart_port *port) { struct clps711x_port *s = dev_get_drvdata(port->dev); - u32 sysflg; + u32 sysflg = 0; regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); @@ -199,9 +200,10 @@ static unsigned int uart_clps711x_get_mctrl(struct uart_port *port) { struct clps711x_port *s = dev_get_drvdata(port->dev); unsigned int result = 0; - u32 sysflg; if (s->use_ms) { + u32 sysflg = 0; + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); if (sysflg & SYSFLG1_DCD) result |= TIOCM_CAR; @@ -224,12 +226,12 @@ static void uart_clps711x_break_ctl(struct uart_port *port, int break_state) { unsigned int ubrlcr; - ubrlcr = readl_relaxed(port->membase + UBRLCR_OFFSET); + ubrlcr = readl(port->membase + UBRLCR_OFFSET); if (break_state) ubrlcr |= UBRLCR_BREAK; else ubrlcr &= ~UBRLCR_BREAK; - writel_relaxed(ubrlcr, port->membase + UBRLCR_OFFSET); + writel(ubrlcr, port->membase + UBRLCR_OFFSET); } static void uart_clps711x_set_ldisc(struct uart_port *port, int ld) @@ -247,8 +249,8 @@ static int uart_clps711x_startup(struct uart_port *port) struct clps711x_port *s = dev_get_drvdata(port->dev); /* Disable break */ - writel_relaxed(readl_relaxed(port->membase + UBRLCR_OFFSET) & - ~UBRLCR_BREAK, port->membase + UBRLCR_OFFSET); + writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK, + port->membase + UBRLCR_OFFSET); /* Enable the port */ return regmap_update_bits(s->syscon, SYSCON_OFFSET, @@ -320,7 +322,7 @@ static void uart_clps711x_set_termios(struct uart_port *port, uart_update_timeout(port, termios->c_cflag, baud); - writel_relaxed(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET); + writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET); } static const char *uart_clps711x_type(struct uart_port *port) @@ -366,13 +368,13 @@ static const struct uart_ops uart_clps711x_ops = { static void uart_clps711x_console_putchar(struct uart_port *port, int ch) { struct clps711x_port *s = dev_get_drvdata(port->dev); - u32 sysflg; + u32 sysflg = 0; do { regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); } while (sysflg & SYSFLG_UTXFF); - writew_relaxed(ch, port->membase + UARTDR_OFFSET); + writew(ch, port->membase + UARTDR_OFFSET); } static void uart_clps711x_console_write(struct console *co, const char *c, @@ -380,7 +382,7 @@ static void uart_clps711x_console_write(struct console *co, const char *c, { struct uart_port *port = clps711x_uart.state[co->index].uart_port; struct clps711x_port *s = dev_get_drvdata(port->dev); - u32 sysflg; + u32 sysflg = 0; uart_console_write(port, c, n, uart_clps711x_console_putchar); @@ -396,8 +398,8 @@ static int uart_clps711x_console_setup(struct console *co, char *options) int ret, index = co->index; struct clps711x_port *s; struct uart_port *port; - u32 ubrlcr, syscon; unsigned int quot; + u32 ubrlcr; if (index < 0 || index >= UART_CLPS711X_NR) return -EINVAL; @@ -409,9 +411,11 @@ static int uart_clps711x_console_setup(struct console *co, char *options) s = dev_get_drvdata(port->dev); if (!options) { + u32 syscon = 0; + regmap_read(s->syscon, SYSCON_OFFSET, &syscon); if (syscon & SYSCON_UARTEN) { - ubrlcr = readl_relaxed(port->membase + UBRLCR_OFFSET); + ubrlcr = readl(port->membase + UBRLCR_OFFSET); if (ubrlcr & UBRLCR_PRTEN) { if (ubrlcr & UBRLCR_EVENPRT) -- cgit v1.2.3-58-ga151