From 24c7a381720843f17efb42de81f7e85aefd6f616 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 28 May 2013 06:22:32 +0000 Subject: thermal: cpu_cooling: fix 'descend' check in get_property() The variable 'descend' is initialized as -1 in function get_property(), and will never get any chance to be updated by the following code. if (freq != CPUFREQ_ENTRY_INVALID && descend != -1) descend = !!(freq > table[i].frequency); This makes function get_property() return the wrong frequency for given cooling level if the frequency table is sorted in ascending. Fix it by correcting the 'descend' check in if-condition to 'descend == -1'. Signed-off-by: Shawn Guo Signed-off-by: Zhang Rui --- drivers/thermal/cpu_cooling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/thermal') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index c94bf2e5de62..82e15dbb3ac7 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -167,7 +167,7 @@ static int get_property(unsigned int cpu, unsigned long input, continue; /* get the frequency order */ - if (freq != CPUFREQ_ENTRY_INVALID && descend != -1) + if (freq != CPUFREQ_ENTRY_INVALID && descend == -1) descend = !!(freq > table[i].frequency); freq = table[i].frequency; -- cgit v1.2.3-58-ga151 From 359836e1de4d32a647bf2c1f99d84d2ff0a098bd Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Wed, 29 May 2013 15:07:41 +0000 Subject: thermal: ti-soc-thermal: remove external heat while extrapolating hotspot For boards that provide a PCB sensor close to SoC junction temperature, it is possible to remove the cumulative heat reported by the SoC temperature sensor. This patch changes the extrapolation computation to consider an external sensor in the extrapolation equations. Cc: Zhang Rui Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 30 ++++++++++++++-------- 1 file changed, 20 insertions(+), 10 deletions(-) (limited to 'drivers/thermal') diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index e3c5e677eaa5..8e67ebf98404 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -38,6 +38,7 @@ /* common data structures */ struct ti_thermal_data { struct thermal_zone_device *ti_thermal; + struct thermal_zone_device *pcb_tz; struct thermal_cooling_device *cool_dev; struct ti_bandgap *bgp; enum thermal_device_mode mode; @@ -77,10 +78,12 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c) static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, unsigned long *temp) { + struct thermal_zone_device *pcb_tz = NULL; struct ti_thermal_data *data = thermal->devdata; struct ti_bandgap *bgp; const struct ti_temp_sensor *s; - int ret, tmp, pcb_temp, slope, constant; + int ret, tmp, slope, constant; + unsigned long pcb_temp; if (!data) return 0; @@ -92,16 +95,22 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, if (ret) return ret; - pcb_temp = 0; - /* TODO: Introduce pcb temperature lookup */ + /* Default constants */ + slope = s->slope; + constant = s->constant; + + pcb_tz = data->pcb_tz; /* In case pcb zone is available, use the extrapolation rule with it */ - if (pcb_temp) { - tmp -= pcb_temp; - slope = s->slope_pcb; - constant = s->constant_pcb; - } else { - slope = s->slope; - constant = s->constant; + if (!IS_ERR_OR_NULL(pcb_tz)) { + ret = thermal_zone_get_temp(pcb_tz, &pcb_temp); + if (!ret) { + tmp -= pcb_temp; /* got a valid PCB temp */ + slope = s->slope_pcb; + constant = s->constant_pcb; + } else { + dev_err(bgp->dev, + "Failed to read PCB state. Using defaults\n"); + } } *temp = ti_thermal_hotspot_temperature(tmp, slope, constant); @@ -273,6 +282,7 @@ static struct ti_thermal_data data->sensor_id = id; data->bgp = bgp; data->mode = THERMAL_DEVICE_ENABLED; + data->pcb_tz = thermal_zone_get_zone_by_name("pcb"); INIT_WORK(&data->thermal_wq, ti_thermal_work); return data; -- cgit v1.2.3-58-ga151 From ba0049eacc59831f4018060dc30fb7c818421a75 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Fri, 7 Jun 2013 19:13:13 +0000 Subject: thermal: ti-soc-thermal: freeze FSM while computing trend In order to read the history buffer, it is required to freeze BG FSM. This patch adds the missing piece of code to freeze the FSM and also a contention area to avoid other parts of the code to access the DTEMPs. Cc: Zhang Rui Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/thermal') diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index f20c1cfe9800..219c051d2e68 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -992,9 +992,12 @@ int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend) goto exit; } + spin_lock(&bgp->lock); + tsr = bgp->conf->sensors[id].registers; /* Freeze and read the last 2 valid readings */ + RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1); reg1 = tsr->ctrl_dtemp_1; reg2 = tsr->ctrl_dtemp_2; @@ -1008,22 +1011,25 @@ int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend) /* Convert from adc values to mCelsius temperature */ ret = ti_bandgap_adc_to_mcelsius(bgp, temp1, &t1); if (ret) - goto exit; + goto unfreeze; ret = ti_bandgap_adc_to_mcelsius(bgp, temp2, &t2); if (ret) - goto exit; + goto unfreeze; /* Fetch the update interval */ ret = ti_bandgap_read_update_interval(bgp, id, &interval); if (ret || !interval) - goto exit; + goto unfreeze; *trend = (t1 - t2) / interval; dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n", t1, t2, *trend); +unfreeze: + RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0); + spin_unlock(&bgp->lock); exit: return ret; } -- cgit v1.2.3-58-ga151 From 0c12b5ac82fbae6903237997677c228089569ace Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Wed, 29 May 2013 15:07:43 +0000 Subject: thermal: ti-soc-thermal: remove usage of IS_ERR_OR_NULL This patch changes the driver to avoid the usage of IS_ERR_OR_NULL() macro. This macro can lead to dangerous results, like returning success (0) during a failure scenario (NULL pointer handling). For this reason this patch is changing the driver after revisiting the code. These are the cases: i. For cases in which IS_ERR_OR_NULL() is used for checking return values of functions that returns either PTR_ERR() or a valid pointer, it has been translated to IS_ERR() check only. ii. For cases that a NULL check is still needed, it has been translated to if (!ptr || IS_ERR(ptr)). Cc: Zhang Rui Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 10 ++++++---- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 15 ++++++++------- 2 files changed, 14 insertions(+), 11 deletions(-) (limited to 'drivers/thermal') diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 219c051d2e68..3f3c512445bb 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -469,7 +469,7 @@ static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id) { int ret = 0; - if (IS_ERR_OR_NULL(bgp)) { + if (!bgp || IS_ERR(bgp)) { pr_err("%s: invalid bandgap pointer\n", __func__); ret = -EINVAL; goto exit; @@ -1197,7 +1197,7 @@ int ti_bandgap_probe(struct platform_device *pdev) int clk_rate, ret = 0, i; bgp = ti_bandgap_build(pdev); - if (IS_ERR_OR_NULL(bgp)) { + if (IS_ERR(bgp)) { dev_err(&pdev->dev, "failed to fetch platform data\n"); return PTR_ERR(bgp); } @@ -1213,17 +1213,19 @@ int ti_bandgap_probe(struct platform_device *pdev) } bgp->fclock = clk_get(NULL, bgp->conf->fclock_name); - ret = IS_ERR_OR_NULL(bgp->fclock); + ret = IS_ERR(bgp->fclock); if (ret) { dev_err(&pdev->dev, "failed to request fclock reference\n"); + ret = PTR_ERR(bgp->fclock); goto free_irqs; } bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name); - ret = IS_ERR_OR_NULL(bgp->div_clk); + ret = IS_ERR(bgp->div_clk); if (ret) { dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n"); + ret = PTR_ERR(bgp->div_clk); goto free_irqs; } diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 8e67ebf98404..4c5f55c37349 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -101,7 +101,7 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, pcb_tz = data->pcb_tz; /* In case pcb zone is available, use the extrapolation rule with it */ - if (!IS_ERR_OR_NULL(pcb_tz)) { + if (!IS_ERR(pcb_tz)) { ret = thermal_zone_get_temp(pcb_tz, &pcb_temp); if (!ret) { tmp -= pcb_temp; /* got a valid PCB temp */ @@ -124,7 +124,7 @@ static int ti_thermal_bind(struct thermal_zone_device *thermal, struct ti_thermal_data *data = thermal->devdata; int id; - if (IS_ERR_OR_NULL(data)) + if (!data || IS_ERR(data)) return -ENODEV; /* check if this is the cooling device we registered */ @@ -146,7 +146,7 @@ static int ti_thermal_unbind(struct thermal_zone_device *thermal, { struct ti_thermal_data *data = thermal->devdata; - if (IS_ERR_OR_NULL(data)) + if (!data || IS_ERR(data)) return -ENODEV; /* check if this is the cooling device we registered */ @@ -282,6 +282,7 @@ static struct ti_thermal_data data->sensor_id = id; data->bgp = bgp; data->mode = THERMAL_DEVICE_ENABLED; + /* pcb_tz will be either valid or PTR_ERR() */ data->pcb_tz = thermal_zone_get_zone_by_name("pcb"); INIT_WORK(&data->thermal_wq, ti_thermal_work); @@ -295,7 +296,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, data = ti_bandgap_get_sensor_data(bgp, id); - if (IS_ERR_OR_NULL(data)) + if (!data || IS_ERR(data)) data = ti_thermal_build_data(bgp, id); if (!data) @@ -306,7 +307,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops, NULL, FAST_TEMP_MONITORING_RATE, FAST_TEMP_MONITORING_RATE); - if (IS_ERR_OR_NULL(data->ti_thermal)) { + if (IS_ERR(data->ti_thermal)) { dev_err(bgp->dev, "thermal zone device is NULL\n"); return PTR_ERR(data->ti_thermal); } @@ -343,7 +344,7 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) struct ti_thermal_data *data; data = ti_bandgap_get_sensor_data(bgp, id); - if (IS_ERR_OR_NULL(data)) + if (!data || IS_ERR(data)) data = ti_thermal_build_data(bgp, id); if (!data) @@ -356,7 +357,7 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) /* Register cooling device */ data->cool_dev = cpufreq_cooling_register(cpu_present_mask); - if (IS_ERR_OR_NULL(data->cool_dev)) { + if (IS_ERR(data->cool_dev)) { dev_err(bgp->dev, "Failed to register cpufreq cooling device\n"); return PTR_ERR(data->cool_dev); -- cgit v1.2.3-58-ga151 From 8926fa4f9b6160b1953ca44852d6044b58a829e1 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Mon, 3 Jun 2013 20:31:55 +0000 Subject: thermal: ti-soc-thermal: add thermal data for DRA752 chips This patch adds the thermal data for TI DRA752 chips. In this change it includes (autogen): . Register offset definitions . Bitfields and masks for all registers . Conversion table Also, the thermal limits, thresholds and extrapolation rules are included. The extrapolation rule is simply add +2C as margin. All 5 sensors, MPU, GPU, CORE, DSPEVE and IVA, are defined and exposed. Only MPU has cooling device. Cc: Zhang Rui Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- drivers/thermal/ti-soc-thermal/Kconfig | 12 + drivers/thermal/ti-soc-thermal/Makefile | 1 + drivers/thermal/ti-soc-thermal/dra752-bandgap.h | 280 ++++++++++++ .../thermal/ti-soc-thermal/dra752-thermal-data.c | 476 +++++++++++++++++++++ drivers/thermal/ti-soc-thermal/ti-thermal.h | 6 + 5 files changed, 775 insertions(+) create mode 100644 drivers/thermal/ti-soc-thermal/dra752-bandgap.h create mode 100644 drivers/thermal/ti-soc-thermal/dra752-thermal-data.c (limited to 'drivers/thermal') diff --git a/drivers/thermal/ti-soc-thermal/Kconfig b/drivers/thermal/ti-soc-thermal/Kconfig index e81375fb2155..bd4c7beba679 100644 --- a/drivers/thermal/ti-soc-thermal/Kconfig +++ b/drivers/thermal/ti-soc-thermal/Kconfig @@ -46,3 +46,15 @@ config OMAP5_THERMAL This includes alert interrupts generation and also the TSHUT support. + +config DRA752_THERMAL + bool "Texas Instruments DRA752 thermal support" + depends on TI_SOC_THERMAL + depends on SOC_DRA7XX + help + If you say yes here you get thermal support for the Texas Instruments + DRA752 SoC family. The current chip supported are: + - DRA752 + + This includes alert interrupts generation and also the TSHUT + support. diff --git a/drivers/thermal/ti-soc-thermal/Makefile b/drivers/thermal/ti-soc-thermal/Makefile index 0ca034fb419d..1226b2484e55 100644 --- a/drivers/thermal/ti-soc-thermal/Makefile +++ b/drivers/thermal/ti-soc-thermal/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal.o ti-soc-thermal-y := ti-bandgap.o ti-soc-thermal-$(CONFIG_TI_THERMAL) += ti-thermal-common.o +ti-soc-thermal-$(CONFIG_DRA752_THERMAL) += dra752-thermal-data.o ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o diff --git a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h new file mode 100644 index 000000000000..6b0f2b1160f7 --- /dev/null +++ b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h @@ -0,0 +1,280 @@ +/* + * DRA752 bandgap registers, bitfields and temperature definitions + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Contact: + * Eduardo Valentin + * Tero Kristo + * + * This is an auto generated file. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#ifndef __DRA752_BANDGAP_H +#define __DRA752_BANDGAP_H + +/** + * *** DRA752 *** + * + * Below, in sequence, are the Register definitions, + * the bitfields and the temperature definitions for DRA752. + */ + +/** + * DRA752 register definitions + * + * Registers are defined as offsets. The offsets are + * relative to FUSE_OPP_BGAP_GPU on DRA752. + * DRA752_BANDGAP_BASE 0x4a0021e0 + * + * Register below are grouped by domain (not necessarily in offset order) + */ + + +/* DRA752.common register offsets */ +#define DRA752_BANDGAP_CTRL_1_OFFSET 0x1a0 +#define DRA752_BANDGAP_STATUS_1_OFFSET 0x1c8 +#define DRA752_BANDGAP_CTRL_2_OFFSET 0x39c +#define DRA752_BANDGAP_STATUS_2_OFFSET 0x3b8 + +/* DRA752.core register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET 0x8 +#define DRA752_TEMP_SENSOR_CORE_OFFSET 0x154 +#define DRA752_BANDGAP_THRESHOLD_CORE_OFFSET 0x1ac +#define DRA752_BANDGAP_TSHUT_CORE_OFFSET 0x1b8 +#define DRA752_BANDGAP_CUMUL_DTEMP_CORE_OFFSET 0x1c4 +#define DRA752_DTEMP_CORE_0_OFFSET 0x208 +#define DRA752_DTEMP_CORE_1_OFFSET 0x20c +#define DRA752_DTEMP_CORE_2_OFFSET 0x210 +#define DRA752_DTEMP_CORE_3_OFFSET 0x214 +#define DRA752_DTEMP_CORE_4_OFFSET 0x218 + +/* DRA752.iva register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET 0x388 +#define DRA752_TEMP_SENSOR_IVA_OFFSET 0x398 +#define DRA752_BANDGAP_THRESHOLD_IVA_OFFSET 0x3a4 +#define DRA752_BANDGAP_TSHUT_IVA_OFFSET 0x3ac +#define DRA752_BANDGAP_CUMUL_DTEMP_IVA_OFFSET 0x3b4 +#define DRA752_DTEMP_IVA_0_OFFSET 0x3d0 +#define DRA752_DTEMP_IVA_1_OFFSET 0x3d4 +#define DRA752_DTEMP_IVA_2_OFFSET 0x3d8 +#define DRA752_DTEMP_IVA_3_OFFSET 0x3dc +#define DRA752_DTEMP_IVA_4_OFFSET 0x3e0 + +/* DRA752.mpu register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET 0x4 +#define DRA752_TEMP_SENSOR_MPU_OFFSET 0x14c +#define DRA752_BANDGAP_THRESHOLD_MPU_OFFSET 0x1a4 +#define DRA752_BANDGAP_TSHUT_MPU_OFFSET 0x1b0 +#define DRA752_BANDGAP_CUMUL_DTEMP_MPU_OFFSET 0x1bc +#define DRA752_DTEMP_MPU_0_OFFSET 0x1e0 +#define DRA752_DTEMP_MPU_1_OFFSET 0x1e4 +#define DRA752_DTEMP_MPU_2_OFFSET 0x1e8 +#define DRA752_DTEMP_MPU_3_OFFSET 0x1ec +#define DRA752_DTEMP_MPU_4_OFFSET 0x1f0 + +/* DRA752.dspeve register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET 0x384 +#define DRA752_TEMP_SENSOR_DSPEVE_OFFSET 0x394 +#define DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET 0x3a0 +#define DRA752_BANDGAP_TSHUT_DSPEVE_OFFSET 0x3a8 +#define DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_OFFSET 0x3b0 +#define DRA752_DTEMP_DSPEVE_0_OFFSET 0x3bc +#define DRA752_DTEMP_DSPEVE_1_OFFSET 0x3c0 +#define DRA752_DTEMP_DSPEVE_2_OFFSET 0x3c4 +#define DRA752_DTEMP_DSPEVE_3_OFFSET 0x3c8 +#define DRA752_DTEMP_DSPEVE_4_OFFSET 0x3cc + +/* DRA752.gpu register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET 0x0 +#define DRA752_TEMP_SENSOR_GPU_OFFSET 0x150 +#define DRA752_BANDGAP_THRESHOLD_GPU_OFFSET 0x1a8 +#define DRA752_BANDGAP_TSHUT_GPU_OFFSET 0x1b4 +#define DRA752_BANDGAP_CUMUL_DTEMP_GPU_OFFSET 0x1c0 +#define DRA752_DTEMP_GPU_0_OFFSET 0x1f4 +#define DRA752_DTEMP_GPU_1_OFFSET 0x1f8 +#define DRA752_DTEMP_GPU_2_OFFSET 0x1fc +#define DRA752_DTEMP_GPU_3_OFFSET 0x200 +#define DRA752_DTEMP_GPU_4_OFFSET 0x204 + +/** + * Register bitfields for DRA752 + * + * All the macros bellow define the required bits for + * controlling temperature on DRA752. Bit defines are + * grouped by register. + */ + +/* DRA752.BANDGAP_STATUS_1 */ +#define DRA752_BANDGAP_STATUS_1_ALERT_MASK BIT(31) +#define DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK BIT(5) +#define DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK BIT(4) +#define DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK BIT(3) +#define DRA752_BANDGAP_STATUS_1_COLD_GPU_MASK BIT(2) +#define DRA752_BANDGAP_STATUS_1_HOT_MPU_MASK BIT(1) +#define DRA752_BANDGAP_STATUS_1_COLD_MPU_MASK BIT(0) + +/* DRA752.BANDGAP_CTRL_2 */ +#define DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK BIT(22) +#define DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK BIT(21) +#define DRA752_BANDGAP_CTRL_2_CLEAR_IVA_MASK BIT(19) +#define DRA752_BANDGAP_CTRL_2_CLEAR_DSPEVE_MASK BIT(18) +#define DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_IVA_MASK BIT(16) +#define DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_DSPEVE_MASK BIT(15) +#define DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK BIT(3) +#define DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK BIT(2) +#define DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK BIT(1) +#define DRA752_BANDGAP_CTRL_2_MASK_COLD_DSPEVE_MASK BIT(0) + +/* DRA752.BANDGAP_STATUS_2 */ +#define DRA752_BANDGAP_STATUS_2_HOT_IVA_MASK BIT(3) +#define DRA752_BANDGAP_STATUS_2_COLD_IVA_MASK BIT(2) +#define DRA752_BANDGAP_STATUS_2_HOT_DSPEVE_MASK BIT(1) +#define DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK BIT(0) + +/* DRA752.BANDGAP_CTRL_1 */ +#define DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK (0x3 << 30) +#define DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK (0x7 << 27) +#define DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK BIT(23) +#define DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK BIT(22) +#define DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK BIT(21) +#define DRA752_BANDGAP_CTRL_1_CLEAR_CORE_MASK BIT(20) +#define DRA752_BANDGAP_CTRL_1_CLEAR_GPU_MASK BIT(19) +#define DRA752_BANDGAP_CTRL_1_CLEAR_MPU_MASK BIT(18) +#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_CORE_MASK BIT(17) +#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_GPU_MASK BIT(16) +#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_MPU_MASK BIT(15) +#define DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK BIT(5) +#define DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK BIT(4) +#define DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK BIT(3) +#define DRA752_BANDGAP_CTRL_1_MASK_COLD_GPU_MASK BIT(2) +#define DRA752_BANDGAP_CTRL_1_MASK_HOT_MPU_MASK BIT(1) +#define DRA752_BANDGAP_CTRL_1_MASK_COLD_MPU_MASK BIT(0) + +/* DRA752.TEMP_SENSOR */ +#define DRA752_TEMP_SENSOR_TMPSOFF_MASK BIT(11) +#define DRA752_TEMP_SENSOR_EOCZ_MASK BIT(10) +#define DRA752_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0) + +/* DRA752.BANDGAP_THRESHOLD */ +#define DRA752_BANDGAP_THRESHOLD_HOT_MASK (0x3ff << 16) +#define DRA752_BANDGAP_THRESHOLD_COLD_MASK (0x3ff << 0) + +/* DRA752.TSHUT_THRESHOLD */ +#define DRA752_TSHUT_THRESHOLD_MUXCTRL_MASK BIT(31) +#define DRA752_TSHUT_THRESHOLD_HOT_MASK (0x3ff << 16) +#define DRA752_TSHUT_THRESHOLD_COLD_MASK (0x3ff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_CORE */ +#define DRA752_BANDGAP_CUMUL_DTEMP_CORE_MASK (0xffffffff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_IVA */ +#define DRA752_BANDGAP_CUMUL_DTEMP_IVA_MASK (0xffffffff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_MPU */ +#define DRA752_BANDGAP_CUMUL_DTEMP_MPU_MASK (0xffffffff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_DSPEVE */ +#define DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_MASK (0xffffffff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_GPU */ +#define DRA752_BANDGAP_CUMUL_DTEMP_GPU_MASK (0xffffffff << 0) + +/** + * Temperature limits and thresholds for DRA752 + * + * All the macros bellow are definitions for handling the + * ADC conversions and representation of temperature limits + * and thresholds for DRA752. Definitions are grouped + * by temperature domain. + */ + +/* DRA752.common temperature definitions */ +/* ADC conversion table limits */ +#define DRA752_ADC_START_VALUE 540 +#define DRA752_ADC_END_VALUE 945 + +/* DRA752.GPU temperature definitions */ +/* bandgap clock limits */ +#define DRA752_GPU_MAX_FREQ 1500000 +#define DRA752_GPU_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_GPU_MIN_TEMP -40000 +#define DRA752_GPU_MAX_TEMP 125000 +#define DRA752_GPU_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_GPU_TSHUT_HOT 915 +#define DRA752_GPU_TSHUT_COLD 900 +#define DRA752_GPU_T_HOT 800 +#define DRA752_GPU_T_COLD 795 + +/* DRA752.MPU temperature definitions */ +/* bandgap clock limits */ +#define DRA752_MPU_MAX_FREQ 1500000 +#define DRA752_MPU_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_MPU_MIN_TEMP -40000 +#define DRA752_MPU_MAX_TEMP 125000 +#define DRA752_MPU_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_MPU_TSHUT_HOT 915 +#define DRA752_MPU_TSHUT_COLD 900 +#define DRA752_MPU_T_HOT 800 +#define DRA752_MPU_T_COLD 795 + +/* DRA752.CORE temperature definitions */ +/* bandgap clock limits */ +#define DRA752_CORE_MAX_FREQ 1500000 +#define DRA752_CORE_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_CORE_MIN_TEMP -40000 +#define DRA752_CORE_MAX_TEMP 125000 +#define DRA752_CORE_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_CORE_TSHUT_HOT 915 +#define DRA752_CORE_TSHUT_COLD 900 +#define DRA752_CORE_T_HOT 800 +#define DRA752_CORE_T_COLD 795 + +/* DRA752.DSPEVE temperature definitions */ +/* bandgap clock limits */ +#define DRA752_DSPEVE_MAX_FREQ 1500000 +#define DRA752_DSPEVE_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_DSPEVE_MIN_TEMP -40000 +#define DRA752_DSPEVE_MAX_TEMP 125000 +#define DRA752_DSPEVE_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_DSPEVE_TSHUT_HOT 915 +#define DRA752_DSPEVE_TSHUT_COLD 900 +#define DRA752_DSPEVE_T_HOT 800 +#define DRA752_DSPEVE_T_COLD 795 + +/* DRA752.IVA temperature definitions */ +/* bandgap clock limits */ +#define DRA752_IVA_MAX_FREQ 1500000 +#define DRA752_IVA_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_IVA_MIN_TEMP -40000 +#define DRA752_IVA_MAX_TEMP 125000 +#define DRA752_IVA_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_IVA_TSHUT_HOT 915 +#define DRA752_IVA_TSHUT_COLD 900 +#define DRA752_IVA_T_HOT 800 +#define DRA752_IVA_T_COLD 795 + +#endif /* __DRA752_BANDGAP_H */ diff --git a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c new file mode 100644 index 000000000000..e5d8326a54d6 --- /dev/null +++ b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c @@ -0,0 +1,476 @@ +/* + * DRA752 thermal data. + * + * Copyright (C) 2013 Texas Instruments Inc. + * Contact: + * Eduardo Valentin + * Tero Kristo + * + * This file is partially autogenerated. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "ti-thermal.h" +#include "ti-bandgap.h" +#include "dra752-bandgap.h" + +/* + * DRA752 has five instances of thermal sensor: MPU, GPU, CORE, + * IVA and DSPEVE need to describe the individual registers and + * bit fields. + */ + +/* + * DRA752 CORE thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_core_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_CORE_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_CORE_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_CORE_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_CORE_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_CORE_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_CORE_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_CORE_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_CORE_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_CORE_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_CORE_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_CORE_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET, +}; + +/* + * DRA752 IVA thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_iva_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_IVA_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_2_CLEAR_IVA_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_IVA_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_IVA_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_IVA_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_IVA_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_IVA_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_IVA_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_IVA_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_IVA_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_IVA_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_IVA_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_IVA_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET, +}; + +/* + * DRA752 MPU thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_mpu_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_MPU_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_MPU_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_MPU_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_MPU_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_MPU_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_MPU_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_MPU_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_MPU_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_MPU_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_MPU_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_MPU_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_MPU_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_MPU_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_MPU_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_MPU_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET, +}; + +/* + * DRA752 DSPEVE thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_dspeve_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_DSPEVE_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_DSPEVE_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_2_CLEAR_DSPEVE_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_DSPEVE_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_DSPEVE_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_DSPEVE_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_DSPEVE_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_DSPEVE_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_DSPEVE_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_DSPEVE_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_DSPEVE_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET, +}; + +/* + * DRA752 GPU thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_gpu_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_GPU_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_GPU_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_GPU_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_GPU_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_GPU_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_GPU_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_GPU_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_GPU_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_GPU_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_GPU_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_GPU_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_GPU_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_GPU_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET, +}; + +/* Thresholds and limits for DRA752 MPU temperature sensor */ +static struct temp_sensor_data dra752_mpu_temp_sensor_data = { + .tshut_hot = DRA752_MPU_TSHUT_HOT, + .tshut_cold = DRA752_MPU_TSHUT_COLD, + .t_hot = DRA752_MPU_T_HOT, + .t_cold = DRA752_MPU_T_COLD, + .min_freq = DRA752_MPU_MIN_FREQ, + .max_freq = DRA752_MPU_MAX_FREQ, + .max_temp = DRA752_MPU_MAX_TEMP, + .min_temp = DRA752_MPU_MIN_TEMP, + .hyst_val = DRA752_MPU_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* Thresholds and limits for DRA752 GPU temperature sensor */ +static struct temp_sensor_data dra752_gpu_temp_sensor_data = { + .tshut_hot = DRA752_GPU_TSHUT_HOT, + .tshut_cold = DRA752_GPU_TSHUT_COLD, + .t_hot = DRA752_GPU_T_HOT, + .t_cold = DRA752_GPU_T_COLD, + .min_freq = DRA752_GPU_MIN_FREQ, + .max_freq = DRA752_GPU_MAX_FREQ, + .max_temp = DRA752_GPU_MAX_TEMP, + .min_temp = DRA752_GPU_MIN_TEMP, + .hyst_val = DRA752_GPU_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* Thresholds and limits for DRA752 CORE temperature sensor */ +static struct temp_sensor_data dra752_core_temp_sensor_data = { + .tshut_hot = DRA752_CORE_TSHUT_HOT, + .tshut_cold = DRA752_CORE_TSHUT_COLD, + .t_hot = DRA752_CORE_T_HOT, + .t_cold = DRA752_CORE_T_COLD, + .min_freq = DRA752_CORE_MIN_FREQ, + .max_freq = DRA752_CORE_MAX_FREQ, + .max_temp = DRA752_CORE_MAX_TEMP, + .min_temp = DRA752_CORE_MIN_TEMP, + .hyst_val = DRA752_CORE_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* Thresholds and limits for DRA752 DSPEVE temperature sensor */ +static struct temp_sensor_data dra752_dspeve_temp_sensor_data = { + .tshut_hot = DRA752_DSPEVE_TSHUT_HOT, + .tshut_cold = DRA752_DSPEVE_TSHUT_COLD, + .t_hot = DRA752_DSPEVE_T_HOT, + .t_cold = DRA752_DSPEVE_T_COLD, + .min_freq = DRA752_DSPEVE_MIN_FREQ, + .max_freq = DRA752_DSPEVE_MAX_FREQ, + .max_temp = DRA752_DSPEVE_MAX_TEMP, + .min_temp = DRA752_DSPEVE_MIN_TEMP, + .hyst_val = DRA752_DSPEVE_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* Thresholds and limits for DRA752 IVA temperature sensor */ +static struct temp_sensor_data dra752_iva_temp_sensor_data = { + .tshut_hot = DRA752_IVA_TSHUT_HOT, + .tshut_cold = DRA752_IVA_TSHUT_COLD, + .t_hot = DRA752_IVA_T_HOT, + .t_cold = DRA752_IVA_T_COLD, + .min_freq = DRA752_IVA_MIN_FREQ, + .max_freq = DRA752_IVA_MAX_FREQ, + .max_temp = DRA752_IVA_MAX_TEMP, + .min_temp = DRA752_IVA_MIN_TEMP, + .hyst_val = DRA752_IVA_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* + * DRA752 : Temperature values in milli degree celsius + * ADC code values from 540 to 945 + */ +static +int dra752_adc_to_temp[DRA752_ADC_END_VALUE - DRA752_ADC_START_VALUE + 1] = { + /* Index 540 - 549 */ + -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200, + -37800, + /* Index 550 - 559 */ + -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200, -33800, + -33400, + /* Index 560 - 569 */ + -33000, -32600, -32200, -31800, -31400, -31000, -30600, -30200, -29800, + -29400, + /* Index 570 - 579 */ + -29000, -28600, -28200, -27700, -27100, -26600, -26200, -25800, -25400, + -25000, + /* Index 580 - 589 */ + -24600, -24200, -23800, -23400, -23000, -22600, -22200, -21800, -21400, + -21000, + /* Index 590 - 599 */ + -20500, -19900, -19400, -19000, -18600, -18200, -17800, -17400, -17000, + -16600, + /* Index 600 - 609 */ + -16200, -15800, -15400, -15000, -14600, -14200, -13800, -13400, -13000, + -12500, + /* Index 610 - 619 */ + -11900, -11400, -11000, -10600, -10200, -9800, -9400, -9000, -8600, + -8200, + /* Index 620 - 629 */ + -7800, -7400, -7000, -6600, -6200, -5800, -5400, -5000, -4500, + -3900, + /* Index 630 - 639 */ + -3400, -3000, -2600, -2200, -1800, -1400, -1000, -600, -200, + 200, + /* Index 640 - 649 */ + 600, 1000, 1400, 1800, 2200, 2600, 3000, 3400, 3900, + 4500, + /* Index 650 - 659 */ + 5000, 5400, 5800, 6200, 6600, 7000, 7400, 7800, 8200, + 8600, + /* Index 660 - 669 */ + 9000, 9400, 9800, 10200, 10600, 11000, 11400, 11800, 12200, + 12700, + /* Index 670 - 679 */ + 13300, 13800, 14200, 14600, 15000, 15400, 15800, 16200, 16600, + 17000, + /* Index 680 - 689 */ + 17400, 17800, 18200, 18600, 19000, 19400, 19800, 20200, 20600, + 21000, + /* Index 690 - 699 */ + 21400, 21900, 22500, 23000, 23400, 23800, 24200, 24600, 25000, + 25400, + /* Index 700 - 709 */ + 25800, 26200, 26600, 27000, 27400, 27800, 28200, 28600, 29000, + 29400, + /* Index 710 - 719 */ + 29800, 30200, 30600, 31000, 31400, 31900, 32500, 33000, 33400, + 33800, + /* Index 720 - 729 */ + 34200, 34600, 35000, 35400, 35800, 36200, 36600, 37000, 37400, + 37800, + /* Index 730 - 739 */ + 38200, 38600, 39000, 39400, 39800, 40200, 40600, 41000, 41400, + 41800, + /* Index 740 - 749 */ + 42200, 42600, 43100, 43700, 44200, 44600, 45000, 45400, 45800, + 46200, + /* Index 750 - 759 */ + 46600, 47000, 47400, 47800, 48200, 48600, 49000, 49400, 49800, + 50200, + /* Index 760 - 769 */ + 50600, 51000, 51400, 51800, 52200, 52600, 53000, 53400, 53800, + 54200, + /* Index 770 - 779 */ + 54600, 55000, 55400, 55900, 56500, 57000, 57400, 57800, 58200, + 58600, + /* Index 780 - 789 */ + 59000, 59400, 59800, 60200, 60600, 61000, 61400, 61800, 62200, + 62600, + /* Index 790 - 799 */ + 63000, 63400, 63800, 64200, 64600, 65000, 65400, 65800, 66200, + 66600, + /* Index 800 - 809 */ + 67000, 67400, 67800, 68200, 68600, 69000, 69400, 69800, 70200, + 70600, + /* Index 810 - 819 */ + 71000, 71500, 72100, 72600, 73000, 73400, 73800, 74200, 74600, + 75000, + /* Index 820 - 829 */ + 75400, 75800, 76200, 76600, 77000, 77400, 77800, 78200, 78600, + 79000, + /* Index 830 - 839 */ + 79400, 79800, 80200, 80600, 81000, 81400, 81800, 82200, 82600, + 83000, + /* Index 840 - 849 */ + 83400, 83800, 84200, 84600, 85000, 85400, 85800, 86200, 86600, + 87000, + /* Index 850 - 859 */ + 87400, 87800, 88200, 88600, 89000, 89400, 89800, 90200, 90600, + 91000, + /* Index 860 - 869 */ + 91400, 91800, 92200, 92600, 93000, 93400, 93800, 94200, 94600, + 95000, + /* Index 870 - 879 */ + 95400, 95800, 96200, 96600, 97000, 97500, 98100, 98600, 99000, + 99400, + /* Index 880 - 889 */ + 99800, 100200, 100600, 101000, 101400, 101800, 102200, 102600, 103000, + 103400, + /* Index 890 - 899 */ + 103800, 104200, 104600, 105000, 105400, 105800, 106200, 106600, 107000, + 107400, + /* Index 900 - 909 */ + 107800, 108200, 108600, 109000, 109400, 109800, 110200, 110600, 111000, + 111400, + /* Index 910 - 919 */ + 111800, 112200, 112600, 113000, 113400, 113800, 114200, 114600, 115000, + 115400, + /* Index 920 - 929 */ + 115800, 116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, + 119400, + /* Index 930 - 939 */ + 119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000, + 123400, + /* Index 940 - 945 */ + 123800, 124200, 124600, 124900, 125000, 125000, +}; + +/* DRA752 data */ +const struct ti_bandgap_data dra752_data = { + .features = TI_BANDGAP_FEATURE_TSHUT_CONFIG | + TI_BANDGAP_FEATURE_FREEZE_BIT | + TI_BANDGAP_FEATURE_TALERT | + TI_BANDGAP_FEATURE_COUNTER_DELAY | + TI_BANDGAP_FEATURE_HISTORY_BUFFER, + .fclock_name = "l3instr_ts_gclk_div", + .div_ck_name = "l3instr_ts_gclk_div", + .conv_table = dra752_adc_to_temp, + .adc_start_val = DRA752_ADC_START_VALUE, + .adc_end_val = DRA752_ADC_END_VALUE, + .expose_sensor = ti_thermal_expose_sensor, + .remove_sensor = ti_thermal_remove_sensor, + .sensors = { + { + .registers = &dra752_mpu_temp_sensor_registers, + .ts_data = &dra752_mpu_temp_sensor_data, + .domain = "cpu", + .register_cooling = ti_thermal_register_cpu_cooling, + .unregister_cooling = ti_thermal_unregister_cpu_cooling, + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + { + .registers = &dra752_gpu_temp_sensor_registers, + .ts_data = &dra752_gpu_temp_sensor_data, + .domain = "gpu", + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + { + .registers = &dra752_core_temp_sensor_registers, + .ts_data = &dra752_core_temp_sensor_data, + .domain = "core", + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + { + .registers = &dra752_dspeve_temp_sensor_registers, + .ts_data = &dra752_dspeve_temp_sensor_data, + .domain = "dspeve", + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + { + .registers = &dra752_iva_temp_sensor_registers, + .ts_data = &dra752_iva_temp_sensor_data, + .domain = "iva", + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + }, + .sensor_count = 5, +}; diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal.h b/drivers/thermal/ti-soc-thermal/ti-thermal.h index 5055777727cc..f8b7ffea6194 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal.h +++ b/drivers/thermal/ti-soc-thermal/ti-thermal.h @@ -38,6 +38,9 @@ #define OMAP_GRADIENT_SLOPE_5430_GPU 117 #define OMAP_GRADIENT_CONST_5430_GPU -2992 +#define DRA752_GRADIENT_SLOPE 0 +#define DRA752_GRADIENT_CONST 2000 + /* PCB sensor calculation constants */ #define OMAP_GRADIENT_SLOPE_W_PCB_4430 0 #define OMAP_GRADIENT_CONST_W_PCB_4430 20000 @@ -51,6 +54,9 @@ #define OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU 464 #define OMAP_GRADIENT_CONST_W_PCB_5430_GPU -5102 +#define DRA752_GRADIENT_SLOPE_W_PCB 0 +#define DRA752_GRADIENT_CONST_W_PCB 2000 + /* trip points of interest in milicelsius (at hotspot level) */ #define OMAP_TRIP_COLD 100000 #define OMAP_TRIP_HOT 110000 -- cgit v1.2.3-58-ga151 From 25870e623476ac210f914d6a0a33bea8baa9eadb Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Wed, 29 May 2013 15:07:45 +0000 Subject: thermal: ti-soc-thermal: add dra752 chip to device table Add support to TI dra752 chips by adapting the driver device table. Cc: Zhang Rui Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 6 ++++++ drivers/thermal/ti-soc-thermal/ti-bandgap.h | 5 +++++ 2 files changed, 11 insertions(+) (limited to 'drivers/thermal') diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 3f3c512445bb..7c0b3ebcf83a 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -1530,6 +1530,12 @@ static const struct of_device_id of_ti_bandgap_match[] = { .compatible = "ti,omap5430-bandgap", .data = (void *)&omap5430_data, }, +#endif +#ifdef CONFIG_DRA752_THERMAL + { + .compatible = "ti,dra752-bandgap", + .data = (void *)&dra752_data, + }, #endif /* Sentinel */ { }, diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index 5f4794abf583..b3adf72f252d 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -400,4 +400,9 @@ extern const struct ti_bandgap_data omap5430_data; #define omap5430_data NULL #endif +#ifdef CONFIG_DRA752_THERMAL +extern const struct ti_bandgap_data dra752_data; +#else +#define dra752_data NULL +#endif #endif -- cgit v1.2.3-58-ga151 From 0c872507d84a6193cd769a808e65d34e1514b083 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Wed, 29 May 2013 21:37:00 +0000 Subject: thermal: consider emul_temperature while computing trend In case emulated temperature is in use, using the trend provided by driver layer can lead to bogus situation. In this case, debugger user would set a temperature value, but the trend would be from driver computation. To avoid this situation, this patch changes the get_tz_trend() to consider the emulated temperature whenever that is in use. Cc: Zhang Rui Cc: Amit Daniel Kachhap Cc: Durgadoss R Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- drivers/thermal/thermal_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/thermal') diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index d755440791b7..c00dc9275fc0 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -155,7 +155,8 @@ int get_tz_trend(struct thermal_zone_device *tz, int trip) { enum thermal_trend trend; - if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) { + if (tz->emul_temperature || !tz->ops->get_trend || + tz->ops->get_trend(tz, trip, &trend)) { if (tz->temperature > tz->last_temperature) trend = THERMAL_TREND_RAISING; else if (tz->temperature < tz->last_temperature) -- cgit v1.2.3-58-ga151