From c955a0cc8a286e5da1ebb88c19201e9bab8c2422 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 18 May 2021 18:27:52 +0200 Subject: spi: spi-mem: add automatic poll status functions With STM32 QSPI, it is possible to poll the status register of the device. This could be done to offload the CPU during an operation (erase or program a SPI NAND for example). spi_mem_poll_status API has been added to handle this feature. This new function take care of the offload/non-offload cases. For the non-offload case, use read_poll_timeout() to poll the status in order to release CPU during this phase. For example, previously, when erasing large area, in non-offload case, CPU load can reach ~50%, now it decrease to ~35%. Signed-off-by: Patrice Chotard Signed-off-by: Christophe Kerello Reviewed-by: Boris Brezillon Link: https://lore.kernel.org/r/20210518162754.15940-2-patrice.chotard@foss.st.com Signed-off-by: Mark Brown --- drivers/spi/spi-mem.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 1513553e4080..177b3e21febf 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -6,6 +6,7 @@ * Author: Boris Brezillon */ #include +#include #include #include #include @@ -743,6 +744,91 @@ static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv) return container_of(drv, struct spi_mem_driver, spidrv.driver); } +static int spi_mem_read_status(struct spi_mem *mem, + const struct spi_mem_op *op, + u16 *status) +{ + const u8 *bytes = (u8 *)op->data.buf.in; + int ret; + + ret = spi_mem_exec_op(mem, op); + if (ret) + return ret; + + if (op->data.nbytes > 1) + *status = ((u16)bytes[0] << 8) | bytes[1]; + else + *status = bytes[0]; + + return 0; +} + +/** + * spi_mem_poll_status() - Poll memory device status + * @mem: SPI memory device + * @op: the memory operation to execute + * @mask: status bitmask to ckeck + * @match: (status & mask) expected value + * @initial_delay_us: delay in us before starting to poll + * @polling_delay_us: time to sleep between reads in us + * @timeout_ms: timeout in milliseconds + * + * This function polls a status register and returns when + * (status & mask) == match or when the timeout has expired. + * + * Return: 0 in case of success, -ETIMEDOUT in case of error, + * -EOPNOTSUPP if not supported. + */ +int spi_mem_poll_status(struct spi_mem *mem, + const struct spi_mem_op *op, + u16 mask, u16 match, + unsigned long initial_delay_us, + unsigned long polling_delay_us, + u16 timeout_ms) +{ + struct spi_controller *ctlr = mem->spi->controller; + int ret = -EOPNOTSUPP; + int read_status_ret; + u16 status; + + if (op->data.nbytes < 1 || op->data.nbytes > 2 || + op->data.dir != SPI_MEM_DATA_IN) + return -EINVAL; + + if (ctlr->mem_ops && ctlr->mem_ops->poll_status) { + ret = spi_mem_access_start(mem); + if (ret) + return ret; + + ret = ctlr->mem_ops->poll_status(mem, op, mask, match, + initial_delay_us, polling_delay_us, + timeout_ms); + + spi_mem_access_end(mem); + } + + if (ret == -EOPNOTSUPP) { + if (!spi_mem_supports_op(mem, op)) + return ret; + + if (initial_delay_us < 10) + udelay(initial_delay_us); + else + usleep_range((initial_delay_us >> 2) + 1, + initial_delay_us); + + ret = read_poll_timeout(spi_mem_read_status, read_status_ret, + (read_status_ret || ((status) & mask) == match), + polling_delay_us, timeout_ms * 1000, false, mem, + op, &status); + if (read_status_ret) + return read_status_ret; + } + + return ret; +} +EXPORT_SYMBOL_GPL(spi_mem_poll_status); + static int spi_mem_probe(struct spi_device *spi) { struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver); -- cgit v1.2.3-58-ga151