From 4b859db2c60692560afbfef1b030d0ddef57b7ee Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sat, 28 Jul 2018 10:19:14 +0200 Subject: spi: spi-gpio: add SPI_3WIRE support Add SPI_3WIRE support to spi-gpio controller introducing set_line_direction function pointer in spi_bitbang data structure. Spi-gpio controller has been tested using hts221 temp/rh iio sensor running in 3wire mode and lsm6dsm running in 4wire mode Signed-off-by: Lorenzo Bianconi Signed-off-by: Mark Brown --- drivers/spi/spi-gpio.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers/spi/spi-gpio.c') diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index be68298cbd9c..0626e6e3ea0c 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -121,7 +121,10 @@ static inline int getmiso(const struct spi_device *spi) { struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi); - return !!gpiod_get_value_cansleep(spi_gpio->miso); + if (spi->mode & SPI_3WIRE) + return !!gpiod_get_value_cansleep(spi_gpio->mosi); + else + return !!gpiod_get_value_cansleep(spi_gpio->miso); } /* @@ -250,6 +253,16 @@ static int spi_gpio_setup(struct spi_device *spi) return status; } +static int spi_gpio_set_direction(struct spi_device *spi, bool output) +{ + struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi); + + if (output) + return gpiod_direction_output(spi_gpio->mosi, 1); + else + return gpiod_direction_input(spi_gpio->mosi); +} + static void spi_gpio_cleanup(struct spi_device *spi) { spi_bitbang_cleanup(spi); @@ -395,6 +408,7 @@ static int spi_gpio_probe(struct platform_device *pdev) return status; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); + master->mode_bits = SPI_3WIRE | SPI_CPHA | SPI_CPOL; master->flags = master_flags; master->bus_num = pdev->id; /* The master needs to think there is a chipselect even if not connected */ @@ -407,6 +421,7 @@ static int spi_gpio_probe(struct platform_device *pdev) spi_gpio->bitbang.master = master; spi_gpio->bitbang.chipselect = spi_gpio_chipselect; + spi_gpio->bitbang.set_line_direction = spi_gpio_set_direction; if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) { spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0; -- cgit v1.2.3-58-ga151