From 89a3681041507773dfee1b88c1c90c8a811a79d3 Mon Sep 17 00:00:00 2001 From: Anil Ravindranath Date: Tue, 25 Aug 2009 17:35:18 -0700 Subject: [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller Signed-off-by: Anil Ravindranath Signed-off-by: James Bottomley --- drivers/scsi/pmcraid.h | 1029 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1029 insertions(+) create mode 100644 drivers/scsi/pmcraid.h (limited to 'drivers/scsi/pmcraid.h') diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h new file mode 100644 index 000000000000..614b3a764fed --- /dev/null +++ b/drivers/scsi/pmcraid.h @@ -0,0 +1,1029 @@ +/* + * pmcraid.h -- PMC Sierra MaxRAID controller driver header file + * + * Copyright (C) 2008, 2009 PMC Sierra Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PMCRAID_H +#define _PMCRAID_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +/* + * Driver name : string representing the driver name + * Device file : /dev file to be used for management interfaces + * Driver version: version string in major_version.minor_version.patch format + * Driver date : date information in "Mon dd yyyy" format + */ +#define PMCRAID_DRIVER_NAME "PMC MaxRAID" +#define PMCRAID_DEVFILE "pmcsas" +#define PMCRAID_DRIVER_VERSION "1.0.2" +#define PMCRAID_DRIVER_DATE __DATE__ + +/* Maximum number of adapters supported by current version of the driver */ +#define PMCRAID_MAX_ADAPTERS 1024 + +/* Bit definitions as per firmware, bit position [0][1][2].....[31] */ +#define PMC_BIT8(n) (1 << (7-n)) +#define PMC_BIT16(n) (1 << (15-n)) +#define PMC_BIT32(n) (1 << (31-n)) + +/* PMC PCI vendor ID and device ID values */ +#define PCI_VENDOR_ID_PMC 0x11F8 +#define PCI_DEVICE_ID_PMC_MAXRAID 0x5220 + +/* + * MAX_CMD : maximum commands that can be outstanding with IOA + * MAX_IO_CMD : command blocks available for IO commands + * MAX_HCAM_CMD : command blocks avaibale for HCAMS + * MAX_INTERNAL_CMD : command blocks avaible for internal commands like reset + */ +#define PMCRAID_MAX_CMD 1024 +#define PMCRAID_MAX_IO_CMD 1020 +#define PMCRAID_MAX_HCAM_CMD 2 +#define PMCRAID_MAX_INTERNAL_CMD 2 + +/* MAX_IOADLS : max number of scatter-gather lists supported by IOA + * IOADLS_INTERNAL : number of ioadls included as part of IOARCB. + * IOADLS_EXTERNAL : number of ioadls allocated external to IOARCB + */ +#define PMCRAID_IOADLS_INTERNAL 27 +#define PMCRAID_IOADLS_EXTERNAL 37 +#define PMCRAID_MAX_IOADLS PMCRAID_IOADLS_INTERNAL + +/* HRRQ_ENTRY_SIZE : size of hrrq buffer + * IOARCB_ALIGNMENT : alignment required for IOARCB + * IOADL_ALIGNMENT : alignment requirement for IOADLs + * MSIX_VECTORS : number of MSIX vectors supported + */ +#define HRRQ_ENTRY_SIZE sizeof(__le32) +#define PMCRAID_IOARCB_ALIGNMENT 32 +#define PMCRAID_IOADL_ALIGNMENT 16 +#define PMCRAID_IOASA_ALIGNMENT 4 +#define PMCRAID_NUM_MSIX_VECTORS 1 + +/* various other limits */ +#define PMCRAID_VENDOR_ID_LEN 8 +#define PMCRAID_PRODUCT_ID_LEN 16 +#define PMCRAID_SERIAL_NUM_LEN 8 +#define PMCRAID_LUN_LEN 8 +#define PMCRAID_MAX_CDB_LEN 16 +#define PMCRAID_DEVICE_ID_LEN 8 +#define PMCRAID_SENSE_DATA_LEN 256 +#define PMCRAID_ADD_CMD_PARAM_LEN 48 + +#define PMCRAID_MAX_BUS_TO_SCAN 1 +#define PMCRAID_MAX_NUM_TARGETS_PER_BUS 256 +#define PMCRAID_MAX_NUM_LUNS_PER_TARGET 8 + +/* IOA bus/target/lun number of IOA resources */ +#define PMCRAID_IOA_BUS_ID 0xfe +#define PMCRAID_IOA_TARGET_ID 0xff +#define PMCRAID_IOA_LUN_ID 0xff +#define PMCRAID_VSET_BUS_ID 0x1 +#define PMCRAID_VSET_LUN_ID 0x0 +#define PMCRAID_PHYS_BUS_ID 0x0 +#define PMCRAID_VIRTUAL_ENCL_BUS_ID 0x8 +#define PMCRAID_MAX_VSET_TARGETS 240 +#define PMCRAID_MAX_VSET_LUNS_PER_TARGET 8 + +#define PMCRAID_IOA_MAX_SECTORS 32767 +#define PMCRAID_VSET_MAX_SECTORS 512 +#define PMCRAID_MAX_CMD_PER_LUN 254 + +/* Number of configuration table entries (resources) */ +#define PMCRAID_MAX_NUM_OF_VSETS 240 + +/* Todo : Check max limit for Phase 1 */ +#define PMCRAID_MAX_NUM_OF_PHY_DEVS 256 + +/* MAX_NUM_OF_DEVS includes 1 FP, 1 Dummy Enclosure device */ +#define PMCRAID_MAX_NUM_OF_DEVS \ + (PMCRAID_MAX_NUM_OF_VSETS + PMCRAID_MAX_NUM_OF_PHY_DEVS + 2) + +#define PMCRAID_MAX_RESOURCES PMCRAID_MAX_NUM_OF_DEVS + +/* Adapter Commands used by driver */ +#define PMCRAID_QUERY_RESOURCE_STATE 0xC2 +#define PMCRAID_RESET_DEVICE 0xC3 +/* options to select reset target */ +#define ENABLE_RESET_MODIFIER 0x80 +#define RESET_DEVICE_LUN 0x40 +#define RESET_DEVICE_TARGET 0x20 +#define RESET_DEVICE_BUS 0x10 + +#define PMCRAID_IDENTIFY_HRRQ 0xC4 +#define PMCRAID_QUERY_IOA_CONFIG 0xC5 +#define PMCRAID_QUERY_CMD_STATUS 0xCB +#define PMCRAID_ABORT_CMD 0xC7 + +/* CANCEL ALL command, provides option for setting SYNC_COMPLETE + * on the target resources for which commands got cancelled + */ +#define PMCRAID_CANCEL_ALL_REQUESTS 0xCE +#define PMCRAID_SYNC_COMPLETE_AFTER_CANCEL PMC_BIT8(0) + +/* HCAM command and types of HCAM supported by IOA */ +#define PMCRAID_HOST_CONTROLLED_ASYNC 0xCF +#define PMCRAID_HCAM_CODE_CONFIG_CHANGE 0x01 +#define PMCRAID_HCAM_CODE_LOG_DATA 0x02 + +/* IOA shutdown command and various shutdown types */ +#define PMCRAID_IOA_SHUTDOWN 0xF7 +#define PMCRAID_SHUTDOWN_NORMAL 0x00 +#define PMCRAID_SHUTDOWN_PREPARE_FOR_NORMAL 0x40 +#define PMCRAID_SHUTDOWN_NONE 0x100 +#define PMCRAID_SHUTDOWN_ABBREV 0x80 + +/* SET SUPPORTED DEVICES command and the option to select all the + * devices to be supported + */ +#define PMCRAID_SET_SUPPORTED_DEVICES 0xFB +#define ALL_DEVICES_SUPPORTED PMC_BIT8(0) + +/* This option is used with SCSI WRITE_BUFFER command */ +#define PMCRAID_WR_BUF_DOWNLOAD_AND_SAVE 0x05 + +/* IOASC Codes used by driver */ +#define PMCRAID_IOASC_SENSE_MASK 0xFFFFFF00 +#define PMCRAID_IOASC_SENSE_KEY(ioasc) ((ioasc) >> 24) +#define PMCRAID_IOASC_SENSE_CODE(ioasc) (((ioasc) & 0x00ff0000) >> 16) +#define PMCRAID_IOASC_SENSE_QUAL(ioasc) (((ioasc) & 0x0000ff00) >> 8) +#define PMCRAID_IOASC_SENSE_STATUS(ioasc) ((ioasc) & 0x000000ff) + +#define PMCRAID_IOASC_GOOD_COMPLETION 0x00000000 +#define PMCRAID_IOASC_NR_INIT_CMD_REQUIRED 0x02040200 +#define PMCRAID_IOASC_NR_IOA_RESET_REQUIRED 0x02048000 +#define PMCRAID_IOASC_NR_SYNC_REQUIRED 0x023F0000 +#define PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC 0x03110C00 +#define PMCRAID_IOASC_HW_CANNOT_COMMUNICATE 0x04050000 +#define PMCRAID_IOASC_HW_DEVICE_TIMEOUT 0x04080100 +#define PMCRAID_IOASC_HW_DEVICE_BUS_STATUS_ERROR 0x04448500 +#define PMCRAID_IOASC_HW_IOA_RESET_REQUIRED 0x04448600 +#define PMCRAID_IOASC_IR_INVALID_RESOURCE_HANDLE 0x05250000 +#define PMCRAID_IOASC_AC_TERMINATED_BY_HOST 0x0B5A0000 +#define PMCRAID_IOASC_UA_BUS_WAS_RESET 0x06290000 +#define PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER 0x06298000 + +/* Driver defined IOASCs */ +#define PMCRAID_IOASC_IOA_WAS_RESET 0x10000001 +#define PMCRAID_IOASC_PCI_ACCESS_ERROR 0x10000002 + +/* Various timeout values (in milliseconds) used. If any of these are chip + * specific, move them to pmcraid_chip_details structure. + */ +#define PMCRAID_PCI_DEASSERT_TIMEOUT 2000 +#define PMCRAID_BIST_TIMEOUT 2000 +#define PMCRAID_AENWAIT_TIMEOUT 5000 +#define PMCRAID_TRANSOP_TIMEOUT 60000 + +#define PMCRAID_RESET_TIMEOUT (2 * HZ) +#define PMCRAID_CHECK_FOR_RESET_TIMEOUT ((HZ / 10)) +#define PMCRAID_VSET_IO_TIMEOUT (60 * HZ) +#define PMCRAID_INTERNAL_TIMEOUT (60 * HZ) +#define PMCRAID_SHUTDOWN_TIMEOUT (150 * HZ) +#define PMCRAID_RESET_BUS_TIMEOUT (60 * HZ) +#define PMCRAID_RESET_HOST_TIMEOUT (150 * HZ) +#define PMCRAID_REQUEST_SENSE_TIMEOUT (30 * HZ) +#define PMCRAID_SET_SUP_DEV_TIMEOUT (2 * 60 * HZ) + +/* structure to represent a scatter-gather element (IOADL descriptor) */ +struct pmcraid_ioadl_desc { + __le64 address; + __le32 data_len; + __u8 reserved[3]; + __u8 flags; +} __attribute__((packed, aligned(PMCRAID_IOADL_ALIGNMENT))); + +/* pmcraid_ioadl_desc.flags values */ +#define IOADL_FLAGS_CHAINED PMC_BIT8(0) +#define IOADL_FLAGS_LAST_DESC PMC_BIT8(1) +#define IOADL_FLAGS_READ_LAST PMC_BIT8(1) +#define IOADL_FLAGS_WRITE_LAST PMC_BIT8(1) + + +/* additional IOARCB data which can be CDB or additional request parameters + * or list of IOADLs. Firmware supports max of 512 bytes for IOARCB, hence then + * number of IOADLs are limted to 27. In case they are more than 27, they will + * be used in chained form + */ +struct pmcraid_ioarcb_add_data { + union { + struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_INTERNAL]; + __u8 add_cmd_params[PMCRAID_ADD_CMD_PARAM_LEN]; + } u; +}; + +/* + * IOA Request Control Block + */ +struct pmcraid_ioarcb { + __le64 ioarcb_bus_addr; + __le32 resource_handle; + __le32 response_handle; + __le64 ioadl_bus_addr; + __le32 ioadl_length; + __le32 data_transfer_length; + __le64 ioasa_bus_addr; + __le16 ioasa_len; + __le16 cmd_timeout; + __le16 add_cmd_param_offset; + __le16 add_cmd_param_length; + __le32 reserved1[2]; + __le32 reserved2; + __u8 request_type; + __u8 request_flags0; + __u8 request_flags1; + __u8 hrrq_id; + __u8 cdb[PMCRAID_MAX_CDB_LEN]; + struct pmcraid_ioarcb_add_data add_data; +} __attribute__((packed, aligned(PMCRAID_IOARCB_ALIGNMENT))); + +/* well known resource handle values */ +#define PMCRAID_IOA_RES_HANDLE 0xffffffff +#define PMCRAID_INVALID_RES_HANDLE 0 + +/* pmcraid_ioarcb.request_type values */ +#define REQ_TYPE_SCSI 0x00 +#define REQ_TYPE_IOACMD 0x01 +#define REQ_TYPE_HCAM 0x02 + +/* pmcraid_ioarcb.flags0 values */ +#define TRANSFER_DIR_WRITE PMC_BIT8(0) +#define INHIBIT_UL_CHECK PMC_BIT8(2) +#define SYNC_OVERRIDE PMC_BIT8(3) +#define SYNC_COMPLETE PMC_BIT8(4) +#define NO_LINK_DESCS PMC_BIT8(5) + +/* pmcraid_ioarcb.flags1 values */ +#define DELAY_AFTER_RESET PMC_BIT8(0) +#define TASK_TAG_SIMPLE 0x10 +#define TASK_TAG_ORDERED 0x20 +#define TASK_TAG_QUEUE_HEAD 0x30 + +/* toggle bit offset in response handle */ +#define HRRQ_TOGGLE_BIT 0x01 +#define HRRQ_RESPONSE_BIT 0x02 + +/* IOA Status Area */ +struct pmcraid_ioasa_vset { + __le32 failing_lba_hi; + __le32 failing_lba_lo; + __le32 reserved; +} __attribute__((packed, aligned(4))); + +struct pmcraid_ioasa { + __le32 ioasc; + __le16 returned_status_length; + __le16 available_status_length; + __le32 residual_data_length; + __le32 ilid; + __le32 fd_ioasc; + __le32 fd_res_address; + __le32 fd_res_handle; + __le32 reserved; + + /* resource specific sense information */ + union { + struct pmcraid_ioasa_vset vset; + } u; + + /* IOA autosense data */ + __le16 auto_sense_length; + __le16 error_data_length; + __u8 sense_data[PMCRAID_SENSE_DATA_LEN]; +} __attribute__((packed, aligned(4))); + +#define PMCRAID_DRIVER_ILID 0xffffffff + +/* Config Table Entry per Resource */ +struct pmcraid_config_table_entry { + __u8 resource_type; + __u8 bus_protocol; + __le16 array_id; + __u8 common_flags0; + __u8 common_flags1; + __u8 unique_flags0; + __u8 unique_flags1; /*also used as vset target_id */ + __le32 resource_handle; + __le32 resource_address; + __u8 device_id[PMCRAID_DEVICE_ID_LEN]; + __u8 lun[PMCRAID_LUN_LEN]; +} __attribute__((packed, aligned(4))); + +/* resource types (config_table_entry.resource_type values) */ +#define RES_TYPE_AF_DASD 0x00 +#define RES_TYPE_GSCSI 0x01 +#define RES_TYPE_VSET 0x02 +#define RES_TYPE_IOA_FP 0xFF + +#define RES_IS_IOA(res) ((res).resource_type == RES_TYPE_IOA_FP) +#define RES_IS_GSCSI(res) ((res).resource_type == RES_TYPE_GSCSI) +#define RES_IS_VSET(res) ((res).resource_type == RES_TYPE_VSET) +#define RES_IS_AFDASD(res) ((res).resource_type == RES_TYPE_AF_DASD) + +/* bus_protocol values used by driver */ +#define RES_TYPE_VENCLOSURE 0x8 + +/* config_table_entry.common_flags0 */ +#define MULTIPATH_RESOURCE PMC_BIT32(0) + +/* unique_flags1 */ +#define IMPORT_MODE_MANUAL PMC_BIT8(0) + +/* well known resource handle values */ +#define RES_HANDLE_IOA 0xFFFFFFFF +#define RES_HANDLE_NONE 0x00000000 + +/* well known resource address values */ +#define RES_ADDRESS_IOAFP 0xFEFFFFFF +#define RES_ADDRESS_INVALID 0xFFFFFFFF + +/* BUS/TARGET/LUN values from resource_addrr */ +#define RES_BUS(res_addr) (le32_to_cpu(res_addr) & 0xFF) +#define RES_TARGET(res_addr) ((le32_to_cpu(res_addr) >> 16) & 0xFF) +#define RES_LUN(res_addr) 0x0 + +/* configuration table structure */ +struct pmcraid_config_table { + __le16 num_entries; + __u8 table_format; + __u8 reserved1; + __u8 flags; + __u8 reserved2[11]; + struct pmcraid_config_table_entry entries[PMCRAID_MAX_RESOURCES]; +} __attribute__((packed, aligned(4))); + +/* config_table.flags value */ +#define MICROCODE_UPDATE_REQUIRED PMC_BIT32(0) + +/* + * HCAM format + */ +#define PMCRAID_HOSTRCB_LDNSIZE 4056 + +/* Error log notification format */ +struct pmcraid_hostrcb_error { + __le32 fd_ioasc; + __le32 fd_ra; + __le32 fd_rh; + __le32 prc; + union { + __u8 data[PMCRAID_HOSTRCB_LDNSIZE]; + } u; +} __attribute__ ((packed, aligned(4))); + +struct pmcraid_hcam_hdr { + __u8 op_code; + __u8 notification_type; + __u8 notification_lost; + __u8 flags; + __u8 overlay_id; + __u8 reserved1[3]; + __le32 ilid; + __le32 timestamp1; + __le32 timestamp2; + __le32 data_len; +} __attribute__((packed, aligned(4))); + +#define PMCRAID_AEN_GROUP 0x3 + +struct pmcraid_hcam_ccn { + struct pmcraid_hcam_hdr header; + struct pmcraid_config_table_entry cfg_entry; +} __attribute__((packed, aligned(4))); + +struct pmcraid_hcam_ldn { + struct pmcraid_hcam_hdr header; + struct pmcraid_hostrcb_error error_log; +} __attribute__((packed, aligned(4))); + +/* pmcraid_hcam.op_code values */ +#define HOSTRCB_TYPE_CCN 0xE1 +#define HOSTRCB_TYPE_LDN 0xE2 + +/* pmcraid_hcam.notification_type values */ +#define NOTIFICATION_TYPE_ENTRY_CHANGED 0x0 +#define NOTIFICATION_TYPE_ENTRY_NEW 0x1 +#define NOTIFICATION_TYPE_ENTRY_DELETED 0x2 +#define NOTIFICATION_TYPE_ERROR_LOG 0x10 +#define NOTIFICATION_TYPE_INFORMATION_LOG 0x11 + +#define HOSTRCB_NOTIFICATIONS_LOST PMC_BIT8(0) + +/* pmcraid_hcam.flags values */ +#define HOSTRCB_INTERNAL_OP_ERROR PMC_BIT8(0) +#define HOSTRCB_ERROR_RESPONSE_SENT PMC_BIT8(1) + +/* pmcraid_hcam.overlay_id values */ +#define HOSTRCB_OVERLAY_ID_08 0x08 +#define HOSTRCB_OVERLAY_ID_09 0x09 +#define HOSTRCB_OVERLAY_ID_11 0x11 +#define HOSTRCB_OVERLAY_ID_12 0x12 +#define HOSTRCB_OVERLAY_ID_13 0x13 +#define HOSTRCB_OVERLAY_ID_14 0x14 +#define HOSTRCB_OVERLAY_ID_16 0x16 +#define HOSTRCB_OVERLAY_ID_17 0x17 +#define HOSTRCB_OVERLAY_ID_20 0x20 +#define HOSTRCB_OVERLAY_ID_FF 0xFF + +/* Implementation specific card details */ +struct pmcraid_chip_details { + /* hardware register offsets */ + unsigned long ioastatus; + unsigned long ioarrin; + unsigned long mailbox; + unsigned long global_intr_mask; + unsigned long ioa_host_intr; + unsigned long ioa_host_intr_clr; + unsigned long ioa_host_mask; + unsigned long ioa_host_mask_clr; + unsigned long host_ioa_intr; + unsigned long host_ioa_intr_clr; + + /* timeout used during transitional to operational state */ + unsigned long transop_timeout; +}; + +/* IOA to HOST doorbells (interrupts) */ +#define INTRS_TRANSITION_TO_OPERATIONAL PMC_BIT32(0) +#define INTRS_IOARCB_TRANSFER_FAILED PMC_BIT32(3) +#define INTRS_IOA_UNIT_CHECK PMC_BIT32(4) +#define INTRS_NO_HRRQ_FOR_CMD_RESPONSE PMC_BIT32(5) +#define INTRS_CRITICAL_OP_IN_PROGRESS PMC_BIT32(6) +#define INTRS_IO_DEBUG_ACK PMC_BIT32(7) +#define INTRS_IOARRIN_LOST PMC_BIT32(27) +#define INTRS_SYSTEM_BUS_MMIO_ERROR PMC_BIT32(28) +#define INTRS_IOA_PROCESSOR_ERROR PMC_BIT32(29) +#define INTRS_HRRQ_VALID PMC_BIT32(30) +#define INTRS_OPERATIONAL_STATUS PMC_BIT32(0) + +/* Host to IOA Doorbells */ +#define DOORBELL_RUNTIME_RESET PMC_BIT32(1) +#define DOORBELL_IOA_RESET_ALERT PMC_BIT32(7) +#define DOORBELL_IOA_DEBUG_ALERT PMC_BIT32(9) +#define DOORBELL_ENABLE_DESTRUCTIVE_DIAGS PMC_BIT32(8) +#define DOORBELL_IOA_START_BIST PMC_BIT32(23) +#define DOORBELL_RESET_IOA PMC_BIT32(31) + +/* Global interrupt mask register value */ +#define GLOBAL_INTERRUPT_MASK 0x4ULL + +#define PMCRAID_ERROR_INTERRUPTS (INTRS_IOARCB_TRANSFER_FAILED | \ + INTRS_IOA_UNIT_CHECK | \ + INTRS_NO_HRRQ_FOR_CMD_RESPONSE | \ + INTRS_IOARRIN_LOST | \ + INTRS_SYSTEM_BUS_MMIO_ERROR | \ + INTRS_IOA_PROCESSOR_ERROR) + +#define PMCRAID_PCI_INTERRUPTS (PMCRAID_ERROR_INTERRUPTS | \ + INTRS_HRRQ_VALID | \ + INTRS_CRITICAL_OP_IN_PROGRESS |\ + INTRS_TRANSITION_TO_OPERATIONAL) + +/* control_block, associated with each of the commands contains IOARCB, IOADLs + * memory for IOASA. Additional 3 * 16 bytes are allocated in order to support + * additional request parameters (of max size 48) any command. + */ +struct pmcraid_control_block { + struct pmcraid_ioarcb ioarcb; + struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_EXTERNAL + 3]; + struct pmcraid_ioasa ioasa; +} __attribute__ ((packed, aligned(PMCRAID_IOARCB_ALIGNMENT))); + +/* pmcraid_sglist - Scatter-gather list allocated for passthrough ioctls + */ +struct pmcraid_sglist { + u32 order; + u32 num_sg; + u32 num_dma_sg; + u32 buffer_len; + struct scatterlist scatterlist[1]; +}; + +/* pmcraid_cmd - LLD representation of SCSI command */ +struct pmcraid_cmd { + + /* Ptr and bus address of DMA.able control block for this command */ + struct pmcraid_control_block *ioa_cb; + dma_addr_t ioa_cb_bus_addr; + + /* sense buffer for REQUEST SENSE command if firmware is not sending + * auto sense data + */ + dma_addr_t sense_buffer_dma; + dma_addr_t dma_handle; + u8 *sense_buffer; + + /* pointer to mid layer structure of SCSI commands */ + struct scsi_cmnd *scsi_cmd; + + struct list_head free_list; + struct completion wait_for_completion; + struct timer_list timer; /* needed for internal commands */ + u32 timeout; /* current timeout value */ + u32 index; /* index into the command list */ + u8 completion_req; /* for handling internal commands */ + u8 release; /* for handling completions */ + + void (*cmd_done) (struct pmcraid_cmd *); + struct pmcraid_instance *drv_inst; + + struct pmcraid_sglist *sglist; /* used for passthrough IOCTLs */ + + /* scratch used during reset sequence */ + union { + unsigned long time_left; + struct pmcraid_resource_entry *res; + } u; +}; + +/* + * Interrupt registers of IOA + */ +struct pmcraid_interrupts { + void __iomem *ioa_host_interrupt_reg; + void __iomem *ioa_host_interrupt_clr_reg; + void __iomem *ioa_host_interrupt_mask_reg; + void __iomem *ioa_host_interrupt_mask_clr_reg; + void __iomem *global_interrupt_mask_reg; + void __iomem *host_ioa_interrupt_reg; + void __iomem *host_ioa_interrupt_clr_reg; +}; + +/* ISR parameters LLD allocates (one for each MSI-X if enabled) vectors */ +struct pmcraid_isr_param { + u8 hrrq_id; /* hrrq entry index */ + u16 vector; /* allocated msi-x vector */ + struct pmcraid_instance *drv_inst; +}; + +/* AEN message header sent as part of event data to applications */ +struct pmcraid_aen_msg { + u32 hostno; + u32 length; + u8 reserved[8]; + u8 data[0]; +}; + +struct pmcraid_hostrcb { + struct pmcraid_instance *drv_inst; + struct pmcraid_aen_msg *msg; + struct pmcraid_hcam_hdr *hcam; /* pointer to hcam buffer */ + struct pmcraid_cmd *cmd; /* pointer to command block used */ + dma_addr_t baddr; /* system address of hcam buffer */ + atomic_t ignore; /* process HCAM response ? */ +}; + +#define PMCRAID_AEN_HDR_SIZE sizeof(struct pmcraid_aen_msg) + + + +/* + * Per adapter structure maintained by LLD + */ +struct pmcraid_instance { + /* Array of allowed-to-be-exposed resources, initialized from + * Configutation Table, later updated with CCNs + */ + struct pmcraid_resource_entry *res_entries; + + struct list_head free_res_q; /* res_entries lists for easy lookup */ + struct list_head used_res_q; /* List of to be exposed resources */ + spinlock_t resource_lock; /* spinlock to protect resource list */ + + void __iomem *mapped_dma_addr; + void __iomem *ioa_status; /* Iomapped IOA status register */ + void __iomem *mailbox; /* Iomapped mailbox register */ + void __iomem *ioarrin; /* IOmapped IOARR IN register */ + + struct pmcraid_interrupts int_regs; + struct pmcraid_chip_details *chip_cfg; + + /* HostRCBs needed for HCAM */ + struct pmcraid_hostrcb ldn; + struct pmcraid_hostrcb ccn; + + + /* Bus address of start of HRRQ */ + dma_addr_t hrrq_start_bus_addr[PMCRAID_NUM_MSIX_VECTORS]; + + /* Pointer to 1st entry of HRRQ */ + __be32 *hrrq_start[PMCRAID_NUM_MSIX_VECTORS]; + + /* Pointer to last entry of HRRQ */ + __be32 *hrrq_end[PMCRAID_NUM_MSIX_VECTORS]; + + /* Pointer to current pointer of hrrq */ + __be32 *hrrq_curr[PMCRAID_NUM_MSIX_VECTORS]; + + /* Lock for HRRQ access */ + spinlock_t hrrq_lock[PMCRAID_NUM_MSIX_VECTORS]; + + /* Expected toggle bit at host */ + u8 host_toggle_bit[PMCRAID_NUM_MSIX_VECTORS]; + + /* No of Reset IOA retries . IOA marked dead if threshold exceeds */ + u8 ioa_reset_attempts; +#define PMCRAID_RESET_ATTEMPTS 3 + + /* Wait Q for threads to wait for Reset IOA completion */ + wait_queue_head_t reset_wait_q; + struct pmcraid_cmd *reset_cmd; + + /* structures for supporting SIGIO based AEN. */ + struct fasync_struct *aen_queue; + struct mutex aen_queue_lock; /* lock for aen subscribers list */ + struct cdev cdev; + + struct Scsi_Host *host; /* mid layer interface structure handle */ + struct pci_dev *pdev; /* PCI device structure handle */ + + u8 current_log_level; /* default level for logging IOASC errors */ + + u8 num_hrrq; /* Number of interrupt vectors allocated */ + dev_t dev; /* Major-Minor numbers for Char device */ + + /* Used as ISR handler argument */ + struct pmcraid_isr_param hrrq_vector[PMCRAID_NUM_MSIX_VECTORS]; + + /* configuration table */ + struct pmcraid_config_table *cfg_table; + dma_addr_t cfg_table_bus_addr; + + /* structures related to command blocks */ + struct kmem_cache *cmd_cachep; /* cache for cmd blocks */ + struct pci_pool *control_pool; /* pool for control blocks */ + char cmd_pool_name[64]; /* name of cmd cache */ + char ctl_pool_name[64]; /* name of control cache */ + + struct pmcraid_cmd *cmd_list[PMCRAID_MAX_CMD]; + + struct list_head free_cmd_pool; + struct list_head pending_cmd_pool; + spinlock_t free_pool_lock; /* free pool lock */ + spinlock_t pending_pool_lock; /* pending pool lock */ + + /* No of IO commands pending with FW */ + atomic_t outstanding_cmds; + + /* should add/delete resources to mid-layer now ?*/ + atomic_t expose_resources; + + /* Tasklet to handle deferred processing */ + struct tasklet_struct isr_tasklet[PMCRAID_NUM_MSIX_VECTORS]; + + /* Work-queue (Shared) for deferred reset processing */ + struct work_struct worker_q; + + + u32 ioa_state:4; /* For IOA Reset sequence FSM */ +#define IOA_STATE_OPERATIONAL 0x0 +#define IOA_STATE_UNKNOWN 0x1 +#define IOA_STATE_DEAD 0x2 +#define IOA_STATE_IN_SOFT_RESET 0x3 +#define IOA_STATE_IN_HARD_RESET 0x4 +#define IOA_STATE_IN_RESET_ALERT 0x5 +#define IOA_STATE_IN_BRINGDOWN 0x6 +#define IOA_STATE_IN_BRINGUP 0x7 + + u32 ioa_reset_in_progress:1; /* true if IOA reset is in progress */ + u32 ioa_hard_reset:1; /* TRUE if Hard Reset is needed */ + u32 ioa_unit_check:1; /* Indicates Unit Check condition */ + u32 ioa_bringdown:1; /* whether IOA needs to be brought down */ + u32 force_ioa_reset:1; /* force adapter reset ? */ + u32 reinit_cfg_table:1; /* reinit config table due to lost CCN */ + u32 ioa_shutdown_type:2;/* shutdown type used during reset */ +#define SHUTDOWN_NONE 0x0 +#define SHUTDOWN_NORMAL 0x1 +#define SHUTDOWN_ABBREV 0x2 + +}; + +/* LLD maintained resource entry structure */ +struct pmcraid_resource_entry { + struct list_head queue; /* link to "to be exposed" resources */ + struct pmcraid_config_table_entry cfg_entry; + struct scsi_device *scsi_dev; /* Link scsi_device structure */ + atomic_t read_failures; /* count of failed READ commands */ + atomic_t write_failures; /* count of failed WRITE commands */ + + /* To indicate add/delete/modify during CCN */ + u8 change_detected; +#define RES_CHANGE_ADD 0x1 /* add this to mid-layer */ +#define RES_CHANGE_DEL 0x2 /* remove this from mid-layer */ + + u8 reset_progress; /* Device is resetting */ + + /* + * When IOA asks for sync (i.e. IOASC = Not Ready, Sync Required), this + * flag will be set, mid layer will be asked to retry. In the next + * attempt, this flag will be checked in queuecommand() to set + * SYNC_COMPLETE flag in IOARCB (flag_0). + */ + u8 sync_reqd; + + /* target indicates the mapped target_id assigned to this resource if + * this is VSET resource. For non-VSET resources this will be un-used + * or zero + */ + u8 target; +}; + +/* Data structures used in IOASC error code logging */ +struct pmcraid_ioasc_error { + u32 ioasc_code; /* IOASC code */ + u8 log_level; /* default log level assignment. */ + char *error_string; +}; + +/* Initial log_level assignments for various IOASCs */ +#define IOASC_LOG_LEVEL_NONE 0x0 /* no logging */ +#define IOASC_LOG_LEVEL_MUST 0x1 /* must log: all high-severity errors */ +#define IOASC_LOG_LEVEL_HARD 0x2 /* optional – low severity errors */ + +/* Error information maintained by LLD. LLD initializes the pmcraid_error_table + * statically. + */ +static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { + {0x01180600, IOASC_LOG_LEVEL_MUST, + "Recovered Error, soft media error, sector reassignment suggested"}, + {0x015D0000, IOASC_LOG_LEVEL_MUST, + "Recovered Error, failure prediction thresold exceeded"}, + {0x015D9200, IOASC_LOG_LEVEL_MUST, + "Recovered Error, soft Cache Card Battery error thresold"}, + {0x015D9200, IOASC_LOG_LEVEL_MUST, + "Recovered Error, soft Cache Card Battery error thresold"}, + {0x02048000, IOASC_LOG_LEVEL_MUST, + "Not Ready, IOA Reset Required"}, + {0x02408500, IOASC_LOG_LEVEL_MUST, + "Not Ready, IOA microcode download required"}, + {0x03110B00, IOASC_LOG_LEVEL_MUST, + "Medium Error, data unreadable, reassignment suggested"}, + {0x03110C00, IOASC_LOG_LEVEL_MUST, + "Medium Error, data unreadable do not reassign"}, + {0x03310000, IOASC_LOG_LEVEL_MUST, + "Medium Error, media corrupted"}, + {0x04050000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, IOA can't communicate with device"}, + {0x04080000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, device bus error"}, + {0x04080000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, device bus is not functioning"}, + {0x04118000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, IOA reserved area data check"}, + {0x04118100, IOASC_LOG_LEVEL_MUST, + "Hardware Error, IOA reserved area invalid data pattern"}, + {0x04118200, IOASC_LOG_LEVEL_MUST, + "Hardware Error, IOA reserved area LRC error"}, + {0x04320000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, reassignment space exhausted"}, + {0x04330000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, data transfer underlength error"}, + {0x04330000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, data transfer overlength error"}, + {0x04418000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, PCI bus error"}, + {0x04440000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, device error"}, + {0x04448300, IOASC_LOG_LEVEL_MUST, + "Hardware Error, undefined device response"}, + {0x04448400, IOASC_LOG_LEVEL_MUST, + "Hardware Error, IOA microcode error"}, + {0x04448600, IOASC_LOG_LEVEL_MUST, + "Hardware Error, IOA reset required"}, + {0x04449200, IOASC_LOG_LEVEL_MUST, + "Hardware Error, hard Cache Fearuee Card Battery error"}, + {0x0444A000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, failed device altered"}, + {0x0444A200, IOASC_LOG_LEVEL_MUST, + "Hardware Error, data check after reassignment"}, + {0x0444A300, IOASC_LOG_LEVEL_MUST, + "Hardware Error, LRC error after reassignment"}, + {0x044A0000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, device bus error (msg/cmd phase)"}, + {0x04670400, IOASC_LOG_LEVEL_MUST, + "Hardware Error, new device can't be used"}, + {0x04678000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, invalid multiadapter configuration"}, + {0x04678100, IOASC_LOG_LEVEL_MUST, + "Hardware Error, incorrect connection between enclosures"}, + {0x04678200, IOASC_LOG_LEVEL_MUST, + "Hardware Error, connections exceed IOA design limits"}, + {0x04678300, IOASC_LOG_LEVEL_MUST, + "Hardware Error, incorrect multipath connection"}, + {0x04679000, IOASC_LOG_LEVEL_MUST, + "Hardware Error, command to LUN failed"}, + {0x064C8000, IOASC_LOG_LEVEL_HARD, + "Unit Attention, cache exists for missing/failed device"}, + {0x06670100, IOASC_LOG_LEVEL_HARD, + "Unit Attention, incompatible exposed mode device"}, + {0x06670600, IOASC_LOG_LEVEL_HARD, + "Unit Attention, attachment of logical unit failed"}, + {0x06678000, IOASC_LOG_LEVEL_MUST, + "Unit Attention, cables exceed connective design limit"}, + {0x06678300, IOASC_LOG_LEVEL_MUST, + "Unit Attention, incomplete multipath connection between" \ + "IOA and enclosure"}, + {0x06678400, IOASC_LOG_LEVEL_MUST, + "Unit Attention, incomplete multipath connection between" \ + "device and enclosure"}, + {0x06678500, IOASC_LOG_LEVEL_MUST, + "Unit Attention, incomplete multipath connection between" \ + "IOA and remote IOA"}, + {0x06678600, IOASC_LOG_LEVEL_HARD, + "Unit Attention, missing remote IOA"}, + {0x06679100, IOASC_LOG_LEVEL_HARD, + "Unit Attention, enclosure doesn't support required multipath" \ + "function"}, + {0x06698200, IOASC_LOG_LEVEL_HARD, + "Unit Attention, corrupt array parity detected on device"}, + {0x066B0200, IOASC_LOG_LEVEL_MUST, + "Unit Attention, array exposed"}, + {0x066B8200, IOASC_LOG_LEVEL_HARD, + "Unit Attention, exposed array is still protected"}, + {0x066B9200, IOASC_LOG_LEVEL_MUST, + "Unit Attention, Multipath redundancy level got worse"}, + {0x07270000, IOASC_LOG_LEVEL_HARD, + "Data Protect, device is read/write protected by IOA"}, + {0x07278000, IOASC_LOG_LEVEL_HARD, + "Data Protect, IOA doesn't support device attribute"}, + {0x07278100, IOASC_LOG_LEVEL_HARD, + "Data Protect, NVRAM mirroring prohibited"}, + {0x07278400, IOASC_LOG_LEVEL_MUST, + "Data Protect, array is short 2 or more devices"}, + {0x07278600, IOASC_LOG_LEVEL_MUST, + "Data Protect, exposed array is short a required device"}, + {0x07278700, IOASC_LOG_LEVEL_MUST, + "Data Protect, array members not at required addresses"}, + {0x07278800, IOASC_LOG_LEVEL_MUST, + "Data Protect, exposed mode device resource address conflict"}, + {0x07278900, IOASC_LOG_LEVEL_MUST, + "Data Protect, incorrect resource address of exposed mode device"}, + {0x07278A00, IOASC_LOG_LEVEL_MUST, + "Data Protect, Array is missing a device and parity is out of sync"}, + {0x07278B00, IOASC_LOG_LEVEL_MUST, + "Data Protect, maximum number of arrays already exist"}, + {0x07278C00, IOASC_LOG_LEVEL_HARD, + "Data Protect, cannot locate cache data for device"}, + {0x07278D00, IOASC_LOG_LEVEL_HARD, + "Data Protect, cache data exits for a changed device"}, + {0x07279100, IOASC_LOG_LEVEL_MUST, + "Data Protect, detection of a device requiring format"}, + {0x07279200, IOASC_LOG_LEVEL_MUST, + "Data Protect, IOA exceeds maximum number of devices"}, + {0x07279600, IOASC_LOG_LEVEL_MUST, + "Data Protect, missing array, volume set is not functional"}, + {0x07279700, IOASC_LOG_LEVEL_MUST, + "Data Protect, single device for a volume set"}, + {0x07279800, IOASC_LOG_LEVEL_MUST, + "Data Protect, missing multiple devices for a volume set"}, + {0x07279900, IOASC_LOG_LEVEL_HARD, + "Data Protect, maximum number of volument sets already exists"}, + {0x07279A00, IOASC_LOG_LEVEL_MUST, + "Data Protect, other volume set problem"}, +}; + +/* macros to help in debugging */ +#define pmcraid_err(...) \ + printk(KERN_ERR "MaxRAID: "__VA_ARGS__) + +#define pmcraid_info(...) \ + if (pmcraid_debug_log) \ + printk(KERN_INFO "MaxRAID: "__VA_ARGS__) + +/* check if given command is a SCSI READ or SCSI WRITE command */ +#define SCSI_READ_CMD 0x1 /* any of SCSI READ commands */ +#define SCSI_WRITE_CMD 0x2 /* any of SCSI WRITE commands */ +#define SCSI_CMD_TYPE(opcode) \ +({ u8 op = opcode; u8 __type = 0;\ + if (op == READ_6 || op == READ_10 || op == READ_12 || op == READ_16)\ + __type = SCSI_READ_CMD;\ + else if (op == WRITE_6 || op == WRITE_10 || op == WRITE_12 || \ + op == WRITE_16)\ + __type = SCSI_WRITE_CMD;\ + __type;\ +}) + +#define IS_SCSI_READ_WRITE(opcode) \ +({ u8 __type = SCSI_CMD_TYPE(opcode); \ + (__type == SCSI_READ_CMD || __type == SCSI_WRITE_CMD) ? 1 : 0;\ +}) + + +/* + * pmcraid_ioctl_header - definition of header structure that preceeds all the + * buffers given as ioctl arguements. + * + * .signature : always ASCII string, "PMCRAID" + * .reserved : not used + * .buffer_length : length of the buffer following the header + */ +struct pmcraid_ioctl_header { + u8 signature[8]; + u32 reserved; + u32 buffer_length; +}; + +#define PMCRAID_IOCTL_SIGNATURE "PMCRAID" + + +/* + * pmcraid_event_details - defines AEN details that apps can retrieve from LLD + * + * .rcb_ccn - complete RCB of CCN + * .rcb_ldn - complete RCB of CCN + */ +struct pmcraid_event_details { + struct pmcraid_hcam_ccn rcb_ccn; + struct pmcraid_hcam_ldn rcb_ldn; +}; + +/* + * pmcraid_driver_ioctl_buffer - structure passed as argument to most of the + * PMC driver handled ioctls. + */ +struct pmcraid_driver_ioctl_buffer { + struct pmcraid_ioctl_header ioctl_header; + struct pmcraid_event_details event_details; +}; + +/* + * pmcraid_passthrough_ioctl_buffer - structure given as argument to + * passthrough(or firmware handled) IOCTL commands. Note that ioarcb requires + * 32-byte alignment so, it is necessary to pack this structure to avoid any + * holes between ioctl_header and passthrough buffer + * + * .ioactl_header : ioctl header + * .ioarcb : filled-up ioarcb buffer, driver always reads this buffer + * .ioasa : buffer for ioasa, driver fills this with IOASA from firmware + * .request_buffer: The I/O buffer (flat), driver reads/writes to this based on + * the transfer directions passed in ioarcb.flags0. Contents + * of this buffer are valid only when ioarcb.data_transfer_len + * is not zero. + */ +struct pmcraid_passthrough_ioctl_buffer { + struct pmcraid_ioctl_header ioctl_header; + struct pmcraid_ioarcb ioarcb; + struct pmcraid_ioasa ioasa; + u8 request_buffer[1]; +} __attribute__ ((packed)); + +/* + * keys to differentiate between driver handled IOCTLs and passthrough + * IOCTLs passed to IOA. driver determines the ioctl type using macro + * _IOC_TYPE + */ +#define PMCRAID_DRIVER_IOCTL 'D' +#define PMCRAID_PASSTHROUGH_IOCTL 'F' + +#define DRV_IOCTL(n, size) \ + _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_DRIVER_IOCTL, (n), (size)) + +#define FMW_IOCTL(n, size) \ + _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_PASSTHROUGH_IOCTL, (n), (size)) + +/* + * _ARGSIZE: macro that gives size of the argument type passed to an IOCTL cmd. + * This is to facilitate applications avoiding un-necessary memory allocations. + * For example, most of driver handled ioctls do not require ioarcb, ioasa. + */ +#define _ARGSIZE(arg) (sizeof(struct pmcraid_ioctl_header) + sizeof(arg)) + +/* Driver handled IOCTL command definitions */ + +#define PMCRAID_IOCTL_RESET_ADAPTER \ + DRV_IOCTL(5, sizeof(struct pmcraid_ioctl_header)) + +/* passthrough/firmware handled commands */ +#define PMCRAID_IOCTL_PASSTHROUGH_COMMAND \ + FMW_IOCTL(1, sizeof(struct pmcraid_passthrough_ioctl_buffer)) + +#define PMCRAID_IOCTL_DOWNLOAD_MICROCODE \ + FMW_IOCTL(2, sizeof(struct pmcraid_passthrough_ioctl_buffer)) + + +#endif /* _PMCRAID_H */ -- cgit v1.2.3-58-ga151