From cdb8c2a6d848deb9eeefffff42974478fbb51b8c Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 2 Apr 2006 21:57:43 +0200 Subject: [SCSI] dc395x: dynamically map scatter-gather for PIO The current dc395x driver uses PIO to transfer up to 4 bytes which do not get transferred by DMA (under unclear circumstances). For this the driver uses page_address() which is broken on highmem. Apart from this the actual calculation of the virtual address is wrong (even without highmem). So, e.g., for reading it reads bytes from the driver to a wrong address and returns wrong data, I guess, for writing it would just output random data to the device. The proper fix, as suggested by many, is to dynamically map data using kmap_atomic(page, KM_BIO_SRC_IRQ) / kunmap_atomic(virt). The reason why it has not been done until now, although I've done some preliminary patches more than a year ago was that nobody interested in fixing this problem was able to reliably reproduce it. Now it changed - with the help from Sebastian Frei (CC'ed) I was able to trigger the PIO path. Thus, I was also able to test and debug it. There are 4 cases when PIO is used in dc395x - data-in / -out with and without scatter-gather. I was able to reproduce and test only data-in with and without SG. So, the data-out path is still untested, but it is also somewhat simpler than the data-in. Fredrik Roubert (also CC'ed) also had PIO triggering on his system, and in his case it was data-out without SG. It would be great if he could test the attached patch on his system, but even if he cannot, I would still request to apply the patch and just wait if anybody cries... Implementation: I put 2 new functions in scsi_lib.c and their declarations in scsi_cmnd.h. I exported them without _GPL, although, I don't feel strongly about that - not many drivers are likely to use them. But there is at least one more - I want to use them in tmscsim.c. Whether these are the right files for the functions and their declarations - not sure either. Actually, they are not scsi-specific, so, might go somewhere around other scattergather magic? They are not platform specific either, and most SG functions are defined under arch/*/... As these issues were discussed previously there were some more routines suggested to manipulate scattergather buffers, I think, some of them were needed around crypto code... So, might be a common place reasonable, like lib/scattergather.c? I am open here. Signed-off-by: James Bottomley --- drivers/scsi/dc395x.c | 217 ++++++++++++++++++++++++++------------------------ 1 file changed, 115 insertions(+), 102 deletions(-) (limited to 'drivers/scsi/dc395x.c') diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index cbf825263f3b..0c56095f8140 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -230,13 +230,12 @@ struct ScsiReqBlk { struct scsi_cmnd *cmd; struct SGentry *segment_x; /* Linear array of hw sg entries (up to 64 entries) */ - u32 sg_bus_addr; /* Bus address of sg list (ie, of segment_x) */ + dma_addr_t sg_bus_addr; /* Bus address of sg list (ie, of segment_x) */ u8 sg_count; /* No of HW sg entries for this request */ u8 sg_index; /* Index of HW sg entry for this request */ - u32 total_xfer_length; /* Total number of bytes remaining to be transfered */ - unsigned char *virt_addr; /* Virtual address of current transfer position */ - + size_t total_xfer_length; /* Total number of bytes remaining to be transfered */ + size_t request_length; /* Total number of bytes in this request */ /* * The sense buffer handling function, request_sense, uses * the first hw sg entry (segment_x[0]) and the transfer @@ -246,8 +245,7 @@ struct ScsiReqBlk { * total_xfer_length in xferred. These values are restored in * pci_unmap_srb_sense. This is the only place xferred is used. */ - unsigned char *virt_addr_req; /* Saved virtual address of the request buffer */ - u32 xferred; /* Saved copy of total_xfer_length */ + size_t xferred; /* Saved copy of total_xfer_length */ u16 state; @@ -977,17 +975,6 @@ static void send_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb) } } -static inline void pio_trigger(void) -{ - static int feedback_requested; - - if (!feedback_requested) { - feedback_requested = 1; - printk(KERN_WARNING "%s: Please, contact " - "to help improve support for your system.\n", __FILE__); - } -} - /* Prepare SRB for being sent to Device DCB w/ command *cmd */ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb) @@ -1001,7 +988,6 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb, srb->sg_count = 0; srb->total_xfer_length = 0; srb->sg_bus_addr = 0; - srb->virt_addr = NULL; srb->sg_index = 0; srb->adapter_status = 0; srb->target_status = 0; @@ -1032,7 +1018,6 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb, reqlen, cmd->request_buffer, cmd->use_sg, srb->sg_count); - srb->virt_addr = page_address(sl->page); for (i = 0; i < srb->sg_count; i++) { u32 busaddr = (u32)sg_dma_address(&sl[i]); u32 seglen = (u32)sl[i].length; @@ -1077,12 +1062,14 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb, srb->total_xfer_length++; srb->segment_x[0].length = srb->total_xfer_length; - srb->virt_addr = cmd->request_buffer; + dprintkdbg(DBG_0, "build_srb: [1] len=%d buf=%p use_sg=%d map=%08x\n", srb->total_xfer_length, cmd->request_buffer, cmd->use_sg, srb->segment_x[0].address); } + + srb->request_length = srb->total_xfer_length; } @@ -1414,10 +1401,10 @@ static int dc395x_eh_abort(struct scsi_cmnd *cmd) } srb = find_cmd(cmd, &dcb->srb_going_list); if (srb) { - dprintkl(KERN_DEBUG, "eh_abort: Command in progress"); + dprintkl(KERN_DEBUG, "eh_abort: Command in progress\n"); /* XXX: Should abort the command here */ } else { - dprintkl(KERN_DEBUG, "eh_abort: Command not found"); + dprintkl(KERN_DEBUG, "eh_abort: Command not found\n"); } return FAILED; } @@ -1976,14 +1963,11 @@ static void sg_verify_length(struct ScsiReqBlk *srb) /* * Compute the next Scatter Gather list index and adjust its length - * and address if necessary; also compute virt_addr + * and address if necessary */ static void sg_update_list(struct ScsiReqBlk *srb, u32 left) { u8 idx; - struct scatterlist *sg; - struct scsi_cmnd *cmd = srb->cmd; - int segment = cmd->use_sg; u32 xferred = srb->total_xfer_length - left; /* bytes transfered */ struct SGentry *psge = srb->segment_x + srb->sg_index; @@ -2016,29 +2000,6 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left) psge++; } sg_verify_length(srb); - - /* we need the corresponding virtual address */ - if (!segment || (srb->flag & AUTO_REQSENSE)) { - srb->virt_addr += xferred; - return; - } - - /* We have to walk the scatterlist to find it */ - sg = (struct scatterlist *)cmd->request_buffer; - while (segment--) { - unsigned long mask = - ~((unsigned long)sg->length - 1) & PAGE_MASK; - if ((sg_dma_address(sg) & mask) == (psge->address & mask)) { - srb->virt_addr = (page_address(sg->page) - + psge->address - - (psge->address & PAGE_MASK)); - return; - } - ++sg; - } - - dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n"); - srb->virt_addr = NULL; } @@ -2050,15 +2011,7 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left) */ static void sg_subtract_one(struct ScsiReqBlk *srb) { - srb->total_xfer_length--; - srb->segment_x[srb->sg_index].length--; - if (srb->total_xfer_length && - !srb->segment_x[srb->sg_index].length) { - if (debug_enabled(DBG_PIO)) - printk(" (next segment)"); - srb->sg_index++; - sg_update_list(srb, srb->total_xfer_length); - } + sg_update_list(srb, srb->total_xfer_length - 1); } @@ -2118,7 +2071,7 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, * If we need more data, the DMA SG list will be freshly set up, anyway */ dprintkdbg(DBG_PIO, "data_out_phase0: " - "DMA{fifcnt=0x%02x fifostat=0x%02x} " + "DMA{fifocnt=0x%02x fifostat=0x%02x} " "SCSI{fifocnt=0x%02x cnt=0x%06x status=0x%04x} total=0x%06x\n", DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT), DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT), @@ -2239,12 +2192,11 @@ static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, data_io_transfer(acb, srb, XFERDATAOUT); } - static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, u16 *pscsi_status) { u16 scsi_status = *pscsi_status; - u32 d_left_counter = 0; + dprintkdbg(DBG_0, "data_in_phase0: (pid#%li) <%02i-%i>\n", srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun); @@ -2262,6 +2214,9 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, * seem to be a bad idea, actually. */ if (!(srb->state & SRB_XFERPAD)) { + u32 d_left_counter; + unsigned int sc, fc; + if (scsi_status & PARITYERROR) { dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) " "Parity Error\n", srb->cmd->pid); @@ -2298,18 +2253,19 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT)); } /* Now: Check remainig data: The SCSI counters should tell us ... */ - d_left_counter = DC395x_read32(acb, TRM_S1040_SCSI_COUNTER) - + ((DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f) + sc = DC395x_read32(acb, TRM_S1040_SCSI_COUNTER); + fc = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT); + d_left_counter = sc + ((fc & 0x1f) << ((srb->dcb->sync_period & WIDE_SYNC) ? 1 : 0)); dprintkdbg(DBG_KG, "data_in_phase0: " "SCSI{fifocnt=0x%02x%s ctr=0x%08x} " "DMA{fifocnt=0x%02x fifostat=0x%02x ctr=0x%08x} " "Remain{totxfer=%i scsi_fifo+ctr=%i}\n", - DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT), + fc, (srb->dcb->sync_period & WIDE_SYNC) ? "words" : "bytes", - DC395x_read32(acb, TRM_S1040_SCSI_COUNTER), - DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT), + sc, + fc, DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT), DC395x_read32(acb, TRM_S1040_DMA_CXCNT), srb->total_xfer_length, d_left_counter); @@ -2317,40 +2273,79 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, /* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */ if (d_left_counter && srb->total_xfer_length <= DC395x_LASTPIO) { + size_t left_io = srb->total_xfer_length; + /*u32 addr = (srb->segment_x[srb->sg_index].address); */ /*sg_update_list (srb, d_left_counter); */ - dprintkdbg(DBG_PIO, "data_in_phase0: PIO (%i %s) to " - "%p for remaining %i bytes:", - DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f, + dprintkdbg(DBG_PIO, "data_in_phase0: PIO (%i %s) " + "for remaining %i bytes:", + fc & 0x1f, (srb->dcb->sync_period & WIDE_SYNC) ? "words" : "bytes", - srb->virt_addr, srb->total_xfer_length); if (srb->dcb->sync_period & WIDE_SYNC) DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, CFG2_WIDEFIFO); - while (DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) != 0x40) { - u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); - pio_trigger(); - *(srb->virt_addr)++ = byte; - if (debug_enabled(DBG_PIO)) - printk(" %02x", byte); - d_left_counter--; - sg_subtract_one(srb); - } - if (srb->dcb->sync_period & WIDE_SYNC) { -#if 1 - /* Read the last byte ... */ - if (srb->total_xfer_length > 0) { - u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); - pio_trigger(); - *(srb->virt_addr)++ = byte; - srb->total_xfer_length--; + while (left_io) { + unsigned char *virt, *base = NULL; + unsigned long flags = 0; + size_t len = left_io; + + if (srb->cmd->use_sg) { + size_t offset = srb->request_length - left_io; + local_irq_save(flags); + /* Assumption: it's inside one page as it's at most 4 bytes and + I just assume it's on a 4-byte boundary */ + base = scsi_kmap_atomic_sg((struct scatterlist *)srb->cmd->request_buffer, + srb->sg_count, &offset, &len); + virt = base + offset; + } else { + virt = srb->cmd->request_buffer + srb->cmd->request_bufflen - left_io; + len = left_io; + } + left_io -= len; + + while (len) { + u8 byte; + byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); + *virt++ = byte; + if (debug_enabled(DBG_PIO)) printk(" %02x", byte); + + d_left_counter--; + sg_subtract_one(srb); + + len--; + + fc = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT); + + if (fc == 0x40) { + left_io = 0; + break; + } + } + + WARN_ON((fc != 0x40) == !d_left_counter); + + if (fc == 0x40 && (srb->dcb->sync_period & WIDE_SYNC)) { + /* Read the last byte ... */ + if (srb->total_xfer_length > 0) { + u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); + + *virt++ = byte; + srb->total_xfer_length--; + if (debug_enabled(DBG_PIO)) + printk(" %02x", byte); + } + + DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0); + } + + if (srb->cmd->use_sg) { + scsi_kunmap_atomic_sg(base); + local_irq_restore(flags); } -#endif - DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0); } /*printk(" %08x", *(u32*)(bus_to_virt (addr))); */ /*srb->total_xfer_length = 0; */ @@ -2509,22 +2504,43 @@ static void data_io_transfer(struct AdapterCtlBlk *acb, SCMD_FIFO_IN); } else { /* write */ int ln = srb->total_xfer_length; + size_t left_io = srb->total_xfer_length; + if (srb->dcb->sync_period & WIDE_SYNC) DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, CFG2_WIDEFIFO); - dprintkdbg(DBG_PIO, - "data_io_transfer: PIO %i bytes from %p:", - srb->total_xfer_length, srb->virt_addr); - while (srb->total_xfer_length) { - if (debug_enabled(DBG_PIO)) - printk(" %02x", (unsigned char) *(srb->virt_addr)); + while (left_io) { + unsigned char *virt, *base = NULL; + unsigned long flags = 0; + size_t len = left_io; + + if (srb->cmd->use_sg) { + size_t offset = srb->request_length - left_io; + local_irq_save(flags); + /* Again, max 4 bytes */ + base = scsi_kmap_atomic_sg((struct scatterlist *)srb->cmd->request_buffer, + srb->sg_count, &offset, &len); + virt = base + offset; + } else { + virt = srb->cmd->request_buffer + srb->cmd->request_bufflen - left_io; + len = left_io; + } + left_io -= len; + + while (len--) { + if (debug_enabled(DBG_PIO)) + printk(" %02x", *virt); - pio_trigger(); - DC395x_write8(acb, TRM_S1040_SCSI_FIFO, - *(srb->virt_addr)++); + DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *virt++); - sg_subtract_one(srb); + sg_subtract_one(srb); + } + + if (srb->cmd->use_sg) { + scsi_kunmap_atomic_sg(base); + local_irq_restore(flags); + } } if (srb->dcb->sync_period & WIDE_SYNC) { if (ln % 2) { @@ -3319,7 +3335,6 @@ static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb, srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address; srb->segment_x[0].length = srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length; - srb->virt_addr = srb->virt_addr_req; } @@ -3713,8 +3728,6 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, srb->xferred = srb->total_xfer_length; /* srb->segment_x : a one entry of S/G list table */ srb->total_xfer_length = sizeof(cmd->sense_buffer); - srb->virt_addr_req = srb->virt_addr; - srb->virt_addr = cmd->sense_buffer; srb->segment_x[0].length = sizeof(cmd->sense_buffer); /* Map sense buffer */ srb->segment_x[0].address = -- cgit v1.2.3-58-ga151