From 5957e444d2aa01705749190c32ae88fc4a029156 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 10 Sep 2013 16:48:07 +0530 Subject: regulator: palmas: configure enable time for LDOs As per datasheet (Referred TPS65913), the on-time for LDO is 500micro second. If LDO6 is in vibrator mode then the on-time is 2000us. Set the enable_time on regulator descriptor accordingly. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/regulator/palmas-regulator.c') diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 3c08e1b5b289..76ce09c6b594 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -1127,6 +1127,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].min_uV = 900000; pmic->desc[id].uV_step = 50000; pmic->desc[id].linear_min_sel = 1; + pmic->desc[id].enable_time = 500; pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, palmas_regs_info[id].vsel_addr); @@ -1145,6 +1146,11 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].min_uV = 450000; pmic->desc[id].uV_step = 25000; } + + /* LOD6 in vibrator mode will have enable time 2000us */ + if (pdata && pdata->ldo6_vibrator && + (id == PALMAS_REG_LDO6)) + pmic->desc[id].enable_time = 2000; } else { pmic->desc[id].n_voltages = 1; if (reg_init && reg_init->roof_floor) -- cgit v1.2.3-58-ga151