From c81396f3da22aa8f1e8fbf7943616a0839c4d63d Mon Sep 17 00:00:00 2001 From: Cathy Luo Date: Thu, 21 Jul 2016 16:30:24 +0530 Subject: mwifiex: fix large amsdu packets causing firmware hang Sometimes host prepares and downloads a large amsdu packet to firmware which leads to a memory corruption in firmware. The reason is __dev_alloc_skb() may allocate larger buffer than required size. This patch solves the problem by checking "adapter->tx_buf_size" instead of relying on skb_tailroom(). Signed-off-by: Cathy Luo Signed-off-by: Amitkumar Karwar Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/11n_aggr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/marvell/mwifiex/11n_aggr.c b/drivers/net/wireless/marvell/mwifiex/11n_aggr.c index dc49c3de1f25..c47d6366875d 100644 --- a/drivers/net/wireless/marvell/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/marvell/mwifiex/11n_aggr.c @@ -205,7 +205,8 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, do { /* Check if AMSDU can accommodate this MSDU */ - if (skb_tailroom(skb_aggr) < (skb_src->len + LLC_SNAP_LEN)) + if ((skb_aggr->len + skb_src->len + LLC_SNAP_LEN) > + adapter->tx_buf_size) break; skb_src = skb_dequeue(&pra_list->skb_head); -- cgit v1.2.3-58-ga151 From 05860bed491b114a9f2d7a4f6e09fb02c0b69056 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 19 Aug 2016 13:37:38 +0300 Subject: ath9k: fix client mode beacon configuration For pure station mode, iter_data.primary_beacon_vif was used and passed to ath_beacon_config, but not set to the station vif. This was causing the following warning: [ 100.310919] ------------[ cut here ]------------ [ 100.315683] WARNING: CPU: 0 PID: 7 at compat-wireless-2016-06-20/drivers/net/wireless/ath/ath9k/beacon.c:642 ath9k_calculate_summary_state+0x250/0x60c [ath9k]() [ 100.402028] CPU: 0 PID: 7 Comm: kworker/u2:1 Tainted: G W 4.4.15 #5 [ 100.409676] Workqueue: phy0 ieee80211_ibss_leave [mac80211] [ 100.415351] Stack : 8736e98c 870b4b20 87a25b54 800a6800 8782a080 80400d63 8039b96c 00000007 [ 100.415351] 803c5edc 87875914 80400000 800a47cc 87a25b54 800a6800 803a0fd8 80400000 [ 100.415351] 00000003 87875914 80400000 80094ae0 87a25b54 8787594c 00000000 801ef308 [ 100.415351] 803ffe70 801ef300 87193d58 87b3a400 87b3ad00 70687930 00000000 00000000 [ 100.415351] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 100.415351] ... [ 100.451703] Call Trace: [ 100.454235] [<800a6800>] vprintk_default+0x24/0x30 [ 100.459110] [<800a47cc>] printk+0x2c/0x38 [ 100.463190] [<800a6800>] vprintk_default+0x24/0x30 [ 100.468072] [<80094ae0>] print_worker_info+0x148/0x174 [ 100.473378] [<801ef308>] serial8250_console_putchar+0x0/0x44 [ 100.479122] [<801ef300>] wait_for_xmitr+0xc4/0xcc [ 100.484014] [<87193d58>] ieee80211_ibss_leave+0xb90/0x1900 [mac80211] [ 100.490590] [<80081604>] warn_slowpath_common+0xa0/0xd0 [ 100.495922] [<801a359c>] dump_stack+0x14/0x28 [ 100.500350] [<80071a00>] show_stack+0x50/0x84 [ 100.504784] [<80081604>] warn_slowpath_common+0xa0/0xd0 [ 100.510106] [<87024c60>] ath9k_calculate_summary_state+0x250/0x60c [ath9k] [ 100.517105] [<800816b8>] warn_slowpath_null+0x18/0x24 [ 100.522256] [<87024c60>] ath9k_calculate_summary_state+0x250/0x60c [ath9k] [ 100.529273] [<87025418>] ath9k_set_txpower+0x148/0x498 [ath9k] [ 100.535302] [<871d2c64>] cleanup_module+0xa74/0xd4c [mac80211] [ 100.541237] [<801ef308>] serial8250_console_putchar+0x0/0x44 [ 100.547042] [<800a5d18>] wake_up_klogd+0x54/0x68 [ 100.551730] [<800a6650>] vprintk_emit+0x404/0x43c [ 100.556623] [<871b9db8>] ieee80211_sta_rx_notify+0x258/0x32c [mac80211] [ 100.563475] [<871ba6a4>] ieee80211_sta_rx_queued_mgmt+0x63c/0x734 [mac80211] [ 100.570693] [<871aa49c>] ieee80211_tx_prepare_skb+0x210/0x230 [mac80211] [ 100.577609] [<800af5d4>] mod_timer+0x15c/0x190 [ 100.582220] [<871ba8b8>] ieee80211_sta_work+0xfc/0xe1c [mac80211] [ 100.588539] [<871940b4>] ieee80211_ibss_leave+0xeec/0x1900 [mac80211] [ 100.595122] [<8009ec84>] dequeue_task_fair+0x44/0x130 [ 100.600281] [<80092a34>] process_one_work+0x1f8/0x334 [ 100.605454] [<80093830>] worker_thread+0x2b4/0x408 [ 100.610317] [<8009357c>] worker_thread+0x0/0x408 [ 100.615019] [<8009357c>] worker_thread+0x0/0x408 [ 100.619705] [<80097b68>] kthread+0xdc/0xe8 [ 100.623886] [<80097a8c>] kthread+0x0/0xe8 [ 100.627961] [<80060878>] ret_from_kernel_thread+0x14/0x1c [ 100.633448] [ 100.634956] ---[ end trace aafbe57e9ae6862f ]--- Fixes: cfda2d8e2314 ("ath9k: Fix beacon configuration for addition/removal of interfaces") Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index a394622c9022..098745dc683b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1154,6 +1154,7 @@ void ath9k_calculate_summary_state(struct ath_softc *sc, bool changed = (iter_data.primary_sta != ctx->primary_sta); if (iter_data.primary_sta) { + iter_data.primary_beacon_vif = iter_data.primary_sta; iter_data.beacons = true; ath9k_set_assoc_state(sc, iter_data.primary_sta, changed); -- cgit v1.2.3-58-ga151 From 7711aaf08ad3fc4d0e937eec1de0a63620444ce7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 19 Aug 2016 13:37:46 +0300 Subject: ath9k: fix using sta->drv_priv before initializing it A station pointer can be passed to the driver on tx, before it has been marked as associated. Since ath9k_sta_state was initializing the entry too late, it resulted in some spurious crashes. Fixes: df3c6eb34da5 ("ath9k: Use sta_state() callback") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 098745dc683b..6ca4337a98c4 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1564,13 +1564,13 @@ static int ath9k_sta_state(struct ieee80211_hw *hw, struct ath_common *common = ath9k_hw_common(sc->sc_ah); int ret = 0; - if (old_state == IEEE80211_STA_AUTH && - new_state == IEEE80211_STA_ASSOC) { + if (old_state == IEEE80211_STA_NOTEXIST && + new_state == IEEE80211_STA_NONE) { ret = ath9k_sta_add(hw, vif, sta); ath_dbg(common, CONFIG, "Add station: %pM\n", sta->addr); - } else if (old_state == IEEE80211_STA_ASSOC && - new_state == IEEE80211_STA_AUTH) { + } else if (old_state == IEEE80211_STA_NONE && + new_state == IEEE80211_STA_NOTEXIST) { ret = ath9k_sta_remove(hw, vif, sta); ath_dbg(common, CONFIG, "Remove station: %pM\n", sta->addr); -- cgit v1.2.3-58-ga151 From 15dacf880e49ce3ecee05eb1a0c6b8e363dbacdc Mon Sep 17 00:00:00 2001 From: "mhiramat@kernel.org" Date: Mon, 15 Aug 2016 18:40:57 +0900 Subject: brcmfmac: Check rtnl_lock is locked when removing interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Check rtnl_lock is locked in brcmf_p2p_ifp_removed() by passing rtnl_locked flag. Actually the caller brcmf_del_if() checks whether the rtnl_lock is locked, but doesn't pass it to brcmf_p2p_ifp_removed(). Without this fix, wpa_supplicant goes softlockup with rtnl_lock holding (this means all other process using netlink are locked up too) e.g. [ 4495.876627] INFO: task wpa_supplicant:7307 blocked for more than 10 seconds. [ 4495.876632] Tainted: G W 4.8.0-rc1+ #8 [ 4495.876635] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4495.876638] wpa_supplicant D ffff974c647b39a0 0 7307 1 0x00000000 [ 4495.876644] ffff974c647b39a0 0000000000000000 ffff974c00000000 ffff974c7dc59c58 [ 4495.876651] ffff974c6b7417c0 ffff974c645017c0 ffff974c647b4000 ffffffff86f16c08 [ 4495.876657] ffff974c645017c0 0000000000000246 00000000ffffffff ffff974c647b39b8 [ 4495.876664] Call Trace: [ 4495.876671] [] schedule+0x3c/0x90 [ 4495.876676] [] schedule_preempt_disabled+0x15/0x20 [ 4495.876682] [] mutex_lock_nested+0x176/0x3b0 [ 4495.876686] [] ? rtnl_lock+0x17/0x20 [ 4495.876690] [] rtnl_lock+0x17/0x20 [ 4495.876720] [] brcmf_p2p_ifp_removed+0x4d/0x70 [brcmfmac] [ 4495.876741] [] brcmf_remove_interface+0x196/0x1b0 [brcmfmac] [ 4495.876760] [] brcmf_p2p_del_vif+0x111/0x220 [brcmfmac] [ 4495.876777] [] brcmf_cfg80211_del_iface+0x21b/0x270 [brcmfmac] [ 4495.876820] [] nl80211_del_interface+0xfe/0x3a0 [cfg80211] [ 4495.876825] [] genl_family_rcv_msg+0x1b5/0x370 [ 4495.876832] [] ? trace_hardirqs_on+0xd/0x10 [ 4495.876836] [] genl_rcv_msg+0x7d/0xb0 [ 4495.876839] [] ? genl_family_rcv_msg+0x370/0x370 [ 4495.876846] [] netlink_rcv_skb+0x97/0xb0 [ 4495.876849] [] genl_rcv+0x28/0x40 [ 4495.876854] [] netlink_unicast+0x1d3/0x2f0 [ 4495.876860] [] ? netlink_unicast+0x14b/0x2f0 [ 4495.876866] [] netlink_sendmsg+0x2eb/0x3a0 [ 4495.876870] [] sock_sendmsg+0x38/0x50 [ 4495.876874] [] ___sys_sendmsg+0x27f/0x290 [ 4495.876882] [] ? mntput_no_expire+0x5/0x3f0 [ 4495.876888] [] ? mntput_no_expire+0x8e/0x3f0 [ 4495.876894] [] ? mntput_no_expire+0x5/0x3f0 [ 4495.876899] [] ? mntput+0x24/0x40 [ 4495.876904] [] ? __fput+0x190/0x200 [ 4495.876909] [] __sys_sendmsg+0x45/0x80 [ 4495.876914] [] SyS_sendmsg+0x12/0x20 [ 4495.876918] [] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 4495.876924] [] ? trace_hardirqs_off_caller+0x1f/0xc0 Signed-off-by: Masami Hiramatsu Acked-by: Rafał Miłecki Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 8 +++++--- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h | 2 +- 3 files changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index 8d16f0204985..65e8c8766441 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -743,7 +743,7 @@ static void brcmf_del_if(struct brcmf_pub *drvr, s32 bsscfgidx, * serious troublesome side effects. The p2p module will clean * up the ifp if needed. */ - brcmf_p2p_ifp_removed(ifp); + brcmf_p2p_ifp_removed(ifp, rtnl_locked); kfree(ifp); } } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c index 66f942f7448e..de19c7c92bc6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c @@ -2297,7 +2297,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) return err; } -void brcmf_p2p_ifp_removed(struct brcmf_if *ifp) +void brcmf_p2p_ifp_removed(struct brcmf_if *ifp, bool rtnl_locked) { struct brcmf_cfg80211_info *cfg; struct brcmf_cfg80211_vif *vif; @@ -2306,9 +2306,11 @@ void brcmf_p2p_ifp_removed(struct brcmf_if *ifp) vif = ifp->vif; cfg = wdev_to_cfg(&vif->wdev); cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; - rtnl_lock(); + if (!rtnl_locked) + rtnl_lock(); cfg80211_unregister_wdev(&vif->wdev); - rtnl_unlock(); + if (!rtnl_locked) + rtnl_unlock(); brcmf_free_vif(vif); } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h index a3bd18c2360b..8ce9447533ef 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h @@ -155,7 +155,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, enum brcmf_fil_p2p_if_types if_type); -void brcmf_p2p_ifp_removed(struct brcmf_if *ifp); +void brcmf_p2p_ifp_removed(struct brcmf_if *ifp, bool rtnl_locked); int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_scan_prep(struct wiphy *wiphy, -- cgit v1.2.3-58-ga151 From b64abcb7dae6060c67ab0e548da3ef923c49641d Mon Sep 17 00:00:00 2001 From: "mhiramat@kernel.org" Date: Mon, 15 Aug 2016 18:41:12 +0900 Subject: brcmfmac: Change vif_event_lock to spinlock Change vif_event_lock to spinlock from mutex, since this lock is used in wait_event_timeout() via vif_event_equals(). This caused a warning report as below. As far as I can see, this lock protects regions where updating structure members, not function calls. Also, since those regions are not called from interrupt handlers (of course, it was a mutex), spin_lock is used instead of spin_lock_irqsave. [ 186.678550] ------------[ cut here ]------------ [ 186.678556] WARNING: CPU: 2 PID: 7140 at /home/mhiramat/ksrc/linux/kernel/sched/core.c:7545 __might_sleep+0x7c/0x80 [ 186.678560] do not call blocking ops when !TASK_RUNNING; state=2 set at [] prepare_to_wait_event+0x60/0x100 [ 186.678560] Modules linked in: brcmfmac xt_CHECKSUM rfcomm ipt_MASQUERADE nf_nat_masquerade_ipv4 xt_addrtype br_netfilter xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_raw ip6table_security ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_filter ip6_tables iptable_raw iptable_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_filter ip_tables x_tables bnep nls_iso8859_1 i2c_designware_platform i2c_designware_core snd_hda_codec_hdmi snd_hda_codec_realtek dcdbas snd_hda_codec_generic snd_hda_intel snd_hda_codec intel_rapl snd_hda_core x86_pkg_temp_thermal intel_powerclamp coretemp [ 186.678594] snd_pcm crct10dif_pclmul crc32_pclmul aesni_intel aes_x86_64 joydev glue_helper snd_hwdep lrw gf128mul uvcvideo ablk_helper snd_seq_midi cryptd snd_seq_midi_event snd_rawmidi videobuf2_vmalloc videobuf2_memops snd_seq input_leds videobuf2_v4l2 cfg80211 videobuf2_core snd_timer videodev serio_raw btusb snd_seq_device media btrtl rtsx_pci_ms snd mei_me memstick hid_multitouch mei soundcore brcmutil idma64 virt_dma intel_lpss_pci processor_thermal_device intel_soc_dts_iosf hci_uart btbcm btqca btintel bluetooth int3403_thermal dell_smo8800 intel_lpss_acpi intel_lpss int3402_thermal int340x_thermal_zone intel_hid mac_hid int3400_thermal shpchp sparse_keymap acpi_pad acpi_thermal_rel acpi_als kfifo_buf industrialio kvm_intel kvm irqbypass parport_pc ppdev lp parport autofs4 btrfs xor raid6_pq [ 186.678631] usbhid nouveau ttm i915 rtsx_pci_sdmmc mxm_wmi i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops psmouse drm ahci rtsx_pci nvme nvme_core libahci i2c_hid hid pinctrl_sunrisepoint video wmi pinctrl_intel fjes [last unloaded: brcmfmac] [ 186.678646] CPU: 2 PID: 7140 Comm: wpa_supplicant Not tainted 4.8.0-rc1+ #8 [ 186.678647] Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 [ 186.678648] 0000000000000000 ffff9d8c64b5b900 ffffffff98442f23 ffff9d8c64b5b950 [ 186.678651] 0000000000000000 ffff9d8c64b5b940 ffffffff9808b22b 00001d790000000d [ 186.678653] ffffffff98c75e78 000000000000026c 0000000000000000 ffff9d8c2706d058 [ 186.678655] Call Trace: [ 186.678659] [] dump_stack+0x85/0xc2 [ 186.678666] [] __warn+0xcb/0xf0 [ 186.678668] [] warn_slowpath_fmt+0x4f/0x60 [ 186.678671] [] ? prepare_to_wait_event+0x60/0x100 [ 186.678672] [] ? prepare_to_wait_event+0x60/0x100 [ 186.678674] [] __might_sleep+0x7c/0x80 [ 186.678680] [] mutex_lock_nested+0x33/0x3b0 [ 186.678682] [] ? trace_hardirqs_on+0xd/0x10 [ 186.678689] [] brcmf_cfg80211_wait_vif_event+0xcd/0x130 [brcmfmac] [ 186.678691] [] ? wake_atomic_t_function+0x60/0x60 [ 186.678697] [] brcmf_p2p_del_vif+0xf9/0x220 [brcmfmac] [ 186.678702] [] brcmf_cfg80211_del_iface+0x21b/0x270 [brcmfmac] [ 186.678716] [] nl80211_del_interface+0xfe/0x3a0 [cfg80211] [ 186.678718] [] genl_family_rcv_msg+0x1b5/0x370 [ 186.678720] [] ? trace_hardirqs_on+0xd/0x10 [ 186.678721] [] genl_rcv_msg+0x7d/0xb0 [ 186.678722] [] ? genl_family_rcv_msg+0x370/0x370 [ 186.678724] [] netlink_rcv_skb+0x97/0xb0 [ 186.678726] [] genl_rcv+0x28/0x40 [ 186.678727] [] netlink_unicast+0x1d3/0x2f0 [ 186.678729] [] ? netlink_unicast+0x14b/0x2f0 [ 186.678731] [] netlink_sendmsg+0x2eb/0x3a0 [ 186.678733] [] sock_sendmsg+0x38/0x50 [ 186.678734] [] ___sys_sendmsg+0x27f/0x290 [ 186.678737] [] ? mntput_no_expire+0x5/0x3f0 [ 186.678739] [] ? mntput_no_expire+0x8e/0x3f0 [ 186.678741] [] ? mntput_no_expire+0x5/0x3f0 [ 186.678743] [] ? mntput+0x24/0x40 [ 186.678744] [] ? __fput+0x190/0x200 [ 186.678746] [] __sys_sendmsg+0x45/0x80 [ 186.678748] [] SyS_sendmsg+0x12/0x20 [ 186.678749] [] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 186.678751] [] ? trace_hardirqs_off_caller+0x1f/0xc0 [ 186.678752] ---[ end trace e224d66c5d8408b5 ]--- Signed-off-by: Masami Hiramatsu Acked-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 26 +++++++++++----------- .../broadcom/brcm80211/brcmfmac/cfg80211.h | 2 +- 2 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 2628d5e12c64..5db56a74e7df 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -5635,7 +5635,7 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, ifevent->action, ifevent->flags, ifevent->ifidx, ifevent->bsscfgidx); - mutex_lock(&event->vif_event_lock); + spin_lock(&event->vif_event_lock); event->action = ifevent->action; vif = event->vif; @@ -5643,7 +5643,7 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, case BRCMF_E_IF_ADD: /* waiting process may have timed out */ if (!cfg->vif_event.vif) { - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); return -EBADF; } @@ -5654,24 +5654,24 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, ifp->ndev->ieee80211_ptr = &vif->wdev; SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy)); } - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); wake_up(&event->vif_wq); return 0; case BRCMF_E_IF_DEL: - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) wake_up(&event->vif_wq); return 0; case BRCMF_E_IF_CHANGE: - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); wake_up(&event->vif_wq); return 0; default: - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); break; } return -EINVAL; @@ -5792,7 +5792,7 @@ static void wl_deinit_priv(struct brcmf_cfg80211_info *cfg) static void init_vif_event(struct brcmf_cfg80211_vif_event *event) { init_waitqueue_head(&event->vif_wq); - mutex_init(&event->vif_event_lock); + spin_lock_init(&event->vif_event_lock); } static s32 brcmf_dongle_roam(struct brcmf_if *ifp) @@ -6691,9 +6691,9 @@ static inline bool vif_event_equals(struct brcmf_cfg80211_vif_event *event, { u8 evt_action; - mutex_lock(&event->vif_event_lock); + spin_lock(&event->vif_event_lock); evt_action = event->action; - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); return evt_action == action; } @@ -6702,10 +6702,10 @@ void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, { struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; - mutex_lock(&event->vif_event_lock); + spin_lock(&event->vif_event_lock); event->vif = vif; event->action = 0; - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); } bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg) @@ -6713,9 +6713,9 @@ bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg) struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; bool armed; - mutex_lock(&event->vif_event_lock); + spin_lock(&event->vif_event_lock); armed = event->vif != NULL; - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); return armed; } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h index 7d77f869b7f1..8889832c17e0 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h @@ -227,7 +227,7 @@ struct escan_info { */ struct brcmf_cfg80211_vif_event { wait_queue_head_t vif_wq; - struct mutex vif_event_lock; + spinlock_t vif_event_lock; u8 action; struct brcmf_cfg80211_vif *vif; }; -- cgit v1.2.3-58-ga151 From 360647959323ec066cc55d82133df73e30530824 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 11 Jul 2016 09:25:45 +0300 Subject: iwlwifi: mvm: consider P2p device type for firmware dump triggers When the user really wanted a dump on P2P Client, he coudln't get it because we checked vif->type but didn't take vif->p2p into account. Fix that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h index f7dff7612c9c..e9f1be9da7d4 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h @@ -105,7 +105,8 @@ iwl_fw_dbg_trigger_vif_match(struct iwl_fw_dbg_trigger_tlv *trig, { u32 trig_vif = le32_to_cpu(trig->vif_type); - return trig_vif == IWL_FW_DBG_CONF_VIF_ANY || vif->type == trig_vif; + return trig_vif == IWL_FW_DBG_CONF_VIF_ANY || + ieee80211_vif_type_p2p(vif) == trig_vif; } static inline bool -- cgit v1.2.3-58-ga151 From bdc98b13716eafc454457e068d6c8aaffaaa71e4 Mon Sep 17 00:00:00 2001 From: Sharon Dvir Date: Mon, 25 Jul 2016 16:11:05 +0300 Subject: iwlwifi: mvm: check if vif is NULL before using it wdev_to_ieee80211_vif() might return NULL. Check that vif != NULL before dereferencing it. Signed-off-by: Sharon Dvir Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index b4fc86d5d7ef..6a615bb73042 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -467,6 +467,8 @@ struct iwl_mvm_vif { static inline struct iwl_mvm_vif * iwl_mvm_vif_from_mac80211(struct ieee80211_vif *vif) { + if (!vif) + return NULL; return (void *)vif->drv_priv; } -- cgit v1.2.3-58-ga151 From ff6e58e648ed5f3cc43891767811d5c3c88bbd41 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Aug 2016 22:06:43 +0300 Subject: iwlwifi: mvm: don't use ret when not initialised fw-dbg code return ret but that variable was either 0 or not initialised. Return 0 always. Signed-off-by: Emmanuel Grumbach Fixes: 6a95126763fb ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c index 1abcabb9b6cd..46b52bf705fb 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c @@ -960,5 +960,6 @@ int iwl_mvm_start_fw_dbg_conf(struct iwl_mvm *mvm, u8 conf_id) } mvm->fw_dbg_conf = conf_id; - return ret; + + return 0; } -- cgit v1.2.3-58-ga151 From a904a08b5fee5317ff0f7b8212aa5d0776795a52 Mon Sep 17 00:00:00 2001 From: "Peer, Ilan" Date: Wed, 10 Aug 2016 13:48:35 +0300 Subject: iwlwifi: mvm: Advertise support for AP channel width change The iwlmvm driver supports channel width change in AP mode. Add the proper flag. Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 6d6064534d59..5dd77e336617 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -624,6 +624,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN | NL80211_FEATURE_LOW_PRIORITY_SCAN | NL80211_FEATURE_P2P_GO_OPPPS | + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE | NL80211_FEATURE_DYNAMIC_SMPS | NL80211_FEATURE_STATIC_SMPS | NL80211_FEATURE_SUPPORTS_WMM_ADMISSION; -- cgit v1.2.3-58-ga151 From 237e15dfd5d651868726111c3a9d828bec700490 Mon Sep 17 00:00:00 2001 From: Ashok Raj Nagarajan Date: Fri, 19 Aug 2016 13:37:37 +0300 Subject: ath10k: fix get rx_status from htt context On handling amsdu on rx path, get the rx_status from htt context. Without this fix, we are seeing warnings when running DBDC traffic like this. WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4105 ieee80211_rx_napi+0x88/0x7d8 [mac80211]() [ 1715.878248] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.18.21 #1 [ 1715.878273] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 1715.878293] [] (show_stack) from [] (dump_stack+0x70/0xbc) [ 1715.878315] [] (dump_stack) from [] (warn_slowpath_common+0x64/0x88) [ 1715.878339] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x18/0x20) [ 1715.878395] [] (warn_slowpath_null) from [] (ieee80211_rx_napi+0x88/0x7d8 [mac80211]) [ 1715.878474] [] (ieee80211_rx_napi [mac80211]) from [] (ath10k_htt_t2h_msg_handler+0xb48/0xbfc [ath10k_core]) [ 1715.878535] [] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [] (ath10k_htt_t2h_msg_handler+0xbf8/0xbfc [ath10k_core]) [ 1715.878597] [] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [] (ath10k_htt_txrx_compl_task+0xa54/0x1170 [ath10k_core]) [ 1715.878639] [] (ath10k_htt_txrx_compl_task [ath10k_core]) from [] (tasklet_action+0xb4/0x130) [ 1715.878659] [] (tasklet_action) from [] (__do_softirq+0xe0/0x210) [ 1715.878678] [] (__do_softirq) from [] (irq_exit+0x84/0xe0) [ 1715.878700] [] (irq_exit) from [] (__handle_domain_irq+0x98/0xd0) [ 1715.878722] [] (__handle_domain_irq) from [] (gic_handle_irq+0x38/0x5c) [ 1715.878741] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 1715.878753] Exception stack(0xc05f9f50 to 0xc05f9f98) [ 1715.878767] 9f40: ffffffed 00000000 00399e1e c000a220 [ 1715.878786] 9f60: 00000000 c05f6780 c05f8000 00000000 c05f5db8 ffffffed c05f8000 c04d1980 [ 1715.878802] 9f80: 00000000 c05f9f98 c0018110 c0018114 60000013 ffffffff [ 1715.878822] [] (__irq_svc) from [] (arch_cpu_idle+0x2c/0x50) [ 1715.878844] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x108/0x234) [ 1715.878866] [] (cpu_startup_entry) from [] (start_kernel+0x33c/0x3b8) [ 1715.878879] ---[ end trace 6d5e1cc0fef8ed6a ]--- [ 1715.878899] ------------[ cut here ]------------ Fixes: 18235664e7f9 ("ath10k: cleanup amsdu processing for rx indication") Signed-off-by: Ashok Raj Nagarajan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/htt_rx.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 78db5d679f19..24c8d65bcf34 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1525,7 +1525,7 @@ static void ath10k_htt_rx_h_filter(struct ath10k *ar, static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt) { struct ath10k *ar = htt->ar; - static struct ieee80211_rx_status rx_status; + struct ieee80211_rx_status *rx_status = &htt->rx_status; struct sk_buff_head amsdu; int ret; @@ -1549,11 +1549,11 @@ static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt) return ret; } - ath10k_htt_rx_h_ppdu(ar, &amsdu, &rx_status, 0xffff); + ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff); ath10k_htt_rx_h_unchain(ar, &amsdu, ret > 0); - ath10k_htt_rx_h_filter(ar, &amsdu, &rx_status); - ath10k_htt_rx_h_mpdu(ar, &amsdu, &rx_status); - ath10k_htt_rx_h_deliver(ar, &amsdu, &rx_status); + ath10k_htt_rx_h_filter(ar, &amsdu, rx_status); + ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status); + ath10k_htt_rx_h_deliver(ar, &amsdu, rx_status); return 0; } -- cgit v1.2.3-58-ga151 From 4e80ffab0e722911842b59299dbf8033709673e5 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 19 Aug 2016 13:37:37 +0300 Subject: ath10k: Remove driver log suggesting QCA9887 support is experimental Support for QCA9887 is no longer experimental and if there are any issues we need to address them Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/pci.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 9a22c478dd1b..07933c51a850 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -3162,7 +3162,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev, pci_hard_reset = ath10k_pci_qca988x_chip_reset; break; case QCA9887_1_0_DEVICE_ID: - dev_warn(&pdev->dev, "QCA9887 support is still experimental, there are likely bugs. You have been warned.\n"); hw_rev = ATH10K_HW_QCA9887; pci_ps = false; pci_soft_reset = ath10k_pci_warm_reset; -- cgit v1.2.3-58-ga151 From c6f1dc4d9ce275c1bd9d90b5630f36ca6abccc97 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:27 +0800 Subject: net: ethernet: mediatek: fix fails from TX housekeeping due to incorrect port setup which net device the SKB is complete for depends on the forward port on txd4 on the corresponding TX descriptor, but the information isn't set up well in case of SKB fragments that would lead to watchdog timeout from the upper layer, so fix it up. Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index f1609542adf1..7fc2ff0c5bf0 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -588,14 +588,15 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, dma_addr_t mapped_addr; unsigned int nr_frags; int i, n_desc = 1; - u32 txd4 = 0; + u32 txd4 = 0, fport; itxd = ring->next_free; if (itxd == ring->last_free) return -ENOMEM; /* set the forward port */ - txd4 |= (mac->id + 1) << TX_DMA_FPORT_SHIFT; + fport = (mac->id + 1) << TX_DMA_FPORT_SHIFT; + txd4 |= fport; tx_buf = mtk_desc_to_tx_buf(ring, itxd); memset(tx_buf, 0, sizeof(*tx_buf)); @@ -653,7 +654,7 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, WRITE_ONCE(txd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(frag_map_size) | last_frag * TX_DMA_LS0)); - WRITE_ONCE(txd->txd4, 0); + WRITE_ONCE(txd->txd4, fport); tx_buf->skb = (struct sk_buff *)MTK_DMA_DUMMY_DESC; tx_buf = mtk_desc_to_tx_buf(ring, txd); -- cgit v1.2.3-58-ga151 From 549e5495467ac2a76489f1304e2b4a7ad85e1644 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:28 +0800 Subject: net: ethernet: mediatek: fix incorrect return value of devm_clk_get with EPROBE_DEFER 1) If the return value of devm_clk_get is EPROBE_DEFER, we should defer probing the driver. The change is verified and works based on 4.8-rc1 staying with the latest clk-next code for MT7623. 2) Changing with the usage of loops to work out if all clocks required are fine Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 39 ++++++++++++++++------------- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 22 ++++++++++------ 2 files changed, 36 insertions(+), 25 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 7fc2ff0c5bf0..a5dcf5741495 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -50,6 +50,10 @@ static const struct mtk_ethtool_stats { MTK_ETHTOOL_STAT(rx_flow_control_packets), }; +static const char * const mtk_clks_source_name[] = { + "ethif", "esw", "gp1", "gp2" +}; + void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg) { __raw_writel(val, eth->base + reg); @@ -1814,6 +1818,7 @@ static int mtk_probe(struct platform_device *pdev) if (!eth) return -ENOMEM; + eth->dev = &pdev->dev; eth->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(eth->base)) return PTR_ERR(eth->base); @@ -1848,21 +1853,21 @@ static int mtk_probe(struct platform_device *pdev) return -ENXIO; } } + for (i = 0; i < ARRAY_SIZE(eth->clks); i++) { + eth->clks[i] = devm_clk_get(eth->dev, + mtk_clks_source_name[i]); + if (IS_ERR(eth->clks[i])) { + if (PTR_ERR(eth->clks[i]) == -EPROBE_DEFER) + return -EPROBE_DEFER; + return -ENODEV; + } + } - eth->clk_ethif = devm_clk_get(&pdev->dev, "ethif"); - eth->clk_esw = devm_clk_get(&pdev->dev, "esw"); - eth->clk_gp1 = devm_clk_get(&pdev->dev, "gp1"); - eth->clk_gp2 = devm_clk_get(&pdev->dev, "gp2"); - if (IS_ERR(eth->clk_esw) || IS_ERR(eth->clk_gp1) || - IS_ERR(eth->clk_gp2) || IS_ERR(eth->clk_ethif)) - return -ENODEV; - - clk_prepare_enable(eth->clk_ethif); - clk_prepare_enable(eth->clk_esw); - clk_prepare_enable(eth->clk_gp1); - clk_prepare_enable(eth->clk_gp2); + clk_prepare_enable(eth->clks[MTK_CLK_ETHIF]); + clk_prepare_enable(eth->clks[MTK_CLK_ESW]); + clk_prepare_enable(eth->clks[MTK_CLK_GP1]); + clk_prepare_enable(eth->clks[MTK_CLK_GP2]); - eth->dev = &pdev->dev; eth->msg_enable = netif_msg_init(mtk_msg_level, MTK_DEFAULT_MSG_ENABLE); INIT_WORK(ð->pending_work, mtk_pending_work); @@ -1905,10 +1910,10 @@ static int mtk_remove(struct platform_device *pdev) { struct mtk_eth *eth = platform_get_drvdata(pdev); - clk_disable_unprepare(eth->clk_ethif); - clk_disable_unprepare(eth->clk_esw); - clk_disable_unprepare(eth->clk_gp1); - clk_disable_unprepare(eth->clk_gp2); + clk_disable_unprepare(eth->clks[MTK_CLK_ETHIF]); + clk_disable_unprepare(eth->clks[MTK_CLK_ESW]); + clk_disable_unprepare(eth->clks[MTK_CLK_GP1]); + clk_disable_unprepare(eth->clks[MTK_CLK_GP2]); netif_napi_del(ð->tx_napi); netif_napi_del(ð->rx_napi); diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index f82e3acb947b..6e1ade7a25c5 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -290,6 +290,17 @@ enum mtk_tx_flags { MTK_TX_FLAGS_PAGE0 = 0x02, }; +/* This enum allows us to identify how the clock is defined on the array of the + * clock in the order + */ +enum mtk_clks_map { + MTK_CLK_ETHIF, + MTK_CLK_ESW, + MTK_CLK_GP1, + MTK_CLK_GP2, + MTK_CLK_MAX +}; + /* struct mtk_tx_buf - This struct holds the pointers to the memory pointed at * by the TX descriptor s * @skb: The SKB pointer of the packet being sent @@ -370,10 +381,7 @@ struct mtk_rx_ring { * @scratch_ring: Newer SoCs need memory for a second HW managed TX ring * @phy_scratch_ring: physical address of scratch_ring * @scratch_head: The scratch memory that scratch_ring points to. - * @clk_ethif: The ethif clock - * @clk_esw: The switch clock - * @clk_gp1: The gmac1 clock - * @clk_gp2: The gmac2 clock + * @clks: clock array for all clocks required * @mii_bus: If there is a bus we need to create an instance for it * @pending_work: The workqueue used to reset the dma ring */ @@ -400,10 +408,8 @@ struct mtk_eth { struct mtk_tx_dma *scratch_ring; dma_addr_t phy_scratch_ring; void *scratch_head; - struct clk *clk_ethif; - struct clk *clk_esw; - struct clk *clk_gp1; - struct clk *clk_gp2; + struct clk *clks[MTK_CLK_MAX]; + struct mii_bus *mii_bus; struct work_struct pending_work; }; -- cgit v1.2.3-58-ga151 From 1b43079906367d4d6e1ad00f04fff525a32e26c4 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:29 +0800 Subject: net: ethernet: mediatek: fix API usage with skb_free_frag use skb_free_frag() instead of legacy put_page() Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index a5dcf5741495..c9e25a753524 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -870,7 +870,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, /* receive data */ skb = build_skb(data, ring->frag_size); if (unlikely(!skb)) { - put_page(virt_to_head_page(new_data)); + skb_free_frag(new_data); netdev->stats.rx_dropped++; goto release_desc; } -- cgit v1.2.3-58-ga151 From d3bd1ce4db8e843dce421e2f8f123e5251a9c7d3 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:30 +0800 Subject: net: ethernet: mediatek: remove redundant free_irq for devm_request_irq allocated irq these irqs are not used for shared irq and disabled during ethernet stops. irq requested by devm_request_irq is safe to be freed automatically on driver detach. Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index c9e25a753524..1ffde919174d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1513,8 +1513,6 @@ static void mtk_uninit(struct net_device *dev) phy_disconnect(mac->phy_dev); mtk_mdio_cleanup(eth); mtk_irq_disable(eth, ~0); - free_irq(eth->irq[1], dev); - free_irq(eth->irq[2], dev); } static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -- cgit v1.2.3-58-ga151 From 7c6b0d76fa02213393815e3b6d5e4a415bf3f0e2 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:31 +0800 Subject: net: ethernet: mediatek: fix logic unbalance between probe and remove original mdio_cleanup is not in the symmetric place against where mdio_init is, so relocate mdio_cleanup to the right one. Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 1ffde919174d..bf5b7e1d9450 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1511,7 +1511,6 @@ static void mtk_uninit(struct net_device *dev) struct mtk_eth *eth = mac->hw; phy_disconnect(mac->phy_dev); - mtk_mdio_cleanup(eth); mtk_irq_disable(eth, ~0); } @@ -1916,6 +1915,7 @@ static int mtk_remove(struct platform_device *pdev) netif_napi_del(ð->tx_napi); netif_napi_del(ð->rx_napi); mtk_cleanup(eth); + mtk_mdio_cleanup(eth); platform_set_drvdata(pdev, NULL); return 0; -- cgit v1.2.3-58-ga151 From 79e9a41438527a4cc2b426a2dfb92cd0825d7d29 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:32 +0800 Subject: net: ethernet: mediatek: fix issue of driver removal with interface is up mtk_stop() must be called to stop for freeing DMA resources acquired and restoring state changed by mtk_open() firstly when module removal. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index bf5b7e1d9450..556951e66978 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1906,6 +1906,14 @@ err_free_dev: static int mtk_remove(struct platform_device *pdev) { struct mtk_eth *eth = platform_get_drvdata(pdev); + int i; + + /* stop all devices to make sure that dma is properly shut down */ + for (i = 0; i < MTK_MAC_COUNT; i++) { + if (!eth->netdev[i]) + continue; + mtk_stop(eth->netdev[i]); + } clk_disable_unprepare(eth->clks[MTK_CLK_ETHIF]); clk_disable_unprepare(eth->clks[MTK_CLK_ESW]); -- cgit v1.2.3-58-ga151 From b5776f01bf1f36a6c89c6dc407dda6509002e0d7 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:33 +0800 Subject: net: ethernet: mediatek: fix the missing of_node_put() after node is used done inside mtk_mdio_init This patch adds the missing of_node_put() after finishing the usage of of_get_child_by_name. Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 556951e66978..409efcf9b5c8 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -324,6 +324,7 @@ static int mtk_mdio_init(struct mtk_eth *eth) err = of_mdiobus_register(eth->mii_bus, mii_np); if (err) goto err_free_bus; + of_node_put(mii_np); return 0; -- cgit v1.2.3-58-ga151 From 1e515b7fdbaeef29b1025c09b50ebbb132a39208 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:34 +0800 Subject: net: ethernet: mediatek: use devm_mdiobus_alloc instead of mdiobus_alloc inside mtk_mdio_init a lot of parts in the driver uses devm_* APIs to gain benefits from the device resource management, so devm_mdiobus_alloc is also used instead of mdiobus_alloc to have more elegant code flow. Using common code provided by the devm_* helps to 1) have simplified the code flow as [1] says 2) decrease the risk of incorrect error handling by human 3) only a few drivers used it since it was proposed on linux 3.16, so just hope to promote for this. Ref: [1] https://patchwork.ozlabs.org/patch/344093/ Signed-off-by: Sean Wang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 409efcf9b5c8..0367f510f81a 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -295,7 +295,7 @@ err_phy: static int mtk_mdio_init(struct mtk_eth *eth) { struct device_node *mii_np; - int err; + int ret; mii_np = of_get_child_by_name(eth->dev->of_node, "mdio-bus"); if (!mii_np) { @@ -304,13 +304,13 @@ static int mtk_mdio_init(struct mtk_eth *eth) } if (!of_device_is_available(mii_np)) { - err = 0; + ret = 0; goto err_put_node; } - eth->mii_bus = mdiobus_alloc(); + eth->mii_bus = devm_mdiobus_alloc(eth->dev); if (!eth->mii_bus) { - err = -ENOMEM; + ret = -ENOMEM; goto err_put_node; } @@ -321,20 +321,11 @@ static int mtk_mdio_init(struct mtk_eth *eth) eth->mii_bus->parent = eth->dev; snprintf(eth->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name); - err = of_mdiobus_register(eth->mii_bus, mii_np); - if (err) - goto err_free_bus; - of_node_put(mii_np); - - return 0; - -err_free_bus: - mdiobus_free(eth->mii_bus); + ret = of_mdiobus_register(eth->mii_bus, mii_np); err_put_node: of_node_put(mii_np); - eth->mii_bus = NULL; - return err; + return ret; } static void mtk_mdio_cleanup(struct mtk_eth *eth) @@ -343,8 +334,6 @@ static void mtk_mdio_cleanup(struct mtk_eth *eth) return; mdiobus_unregister(eth->mii_bus); - of_node_put(eth->mii_bus->dev.of_node); - mdiobus_free(eth->mii_bus); } static inline void mtk_irq_disable(struct mtk_eth *eth, u32 mask) -- cgit v1.2.3-58-ga151 From aa6e8a54f653daaf34ff7fdceb2d992d714eea7c Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:35 +0800 Subject: net: ethernet: mediatek: fix error handling inside mtk_mdio_init Return -ENODEV if the MDIO bus is disabled in the device tree. Signed-off-by: Sean Wang Acked-by: John Crispin Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 0367f510f81a..d9199151a83e 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -304,7 +304,7 @@ static int mtk_mdio_init(struct mtk_eth *eth) } if (!of_device_is_available(mii_np)) { - ret = 0; + ret = -ENODEV; goto err_put_node; } -- cgit v1.2.3-58-ga151 From 5fe118c9fd6b8e129788c88a10ac0af82b255f81 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 29 Aug 2016 08:29:52 -0400 Subject: qed*: Disallow dcbx configuration for VF interfaces. Dcbx configuration is not supported for VF interfaces. Hence don't populate the callbacks for VFs and also fail the dcbx-query for VFs. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 4 ++++ drivers/net/ethernet/qlogic/qede/qede_main.c | 3 ++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 226cb08cc055..7ad1667ee354 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -19,6 +19,7 @@ #include "qed_dcbx.h" #include "qed_hsi.h" #include "qed_sp.h" +#include "qed_sriov.h" #ifdef CONFIG_DCB #include #endif @@ -945,6 +946,9 @@ static int qed_dcbx_query_params(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt; int rc; + if (IS_VF(p_hwfn->cdev)) + return -EINVAL; + p_ptt = qed_ptt_acquire(p_hwfn); if (!p_ptt) return -EBUSY; diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index a6eb6af8cbe8..9544e4c41359 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -2520,7 +2520,8 @@ static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level, edev->ops->register_ops(cdev, &qede_ll_ops, edev); #ifdef CONFIG_DCB - qede_set_dcbnl_ops(edev->ndev); + if (!IS_VF(edev)) + qede_set_dcbnl_ops(edev->ndev); #endif INIT_DELAYED_WORK(&edev->sp_task, qede_sp_task); -- cgit v1.2.3-58-ga151 From 5ec5dfa4d29448002bb05018ba12620e7fafffd1 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 29 Aug 2016 08:29:53 -0400 Subject: qed: Set selection-field while configuring the app entry in ieee mode. Management firmware requires the selection-field (SF) to be set for configuring the application/protocol entry in IEEE mode. Without this setting, the app entry will be configured incorrectly in MFW. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 7ad1667ee354..192a886edfe9 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -1063,23 +1063,31 @@ qed_dcbx_set_app_data(struct qed_hwfn *p_hwfn, for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { entry = &p_app->app_pri_tbl[i].entry; if (ieee) { - *entry &= ~DCBX_APP_SF_IEEE_MASK; + *entry &= ~(DCBX_APP_SF_IEEE_MASK | DCBX_APP_SF_MASK); switch (p_params->app_entry[i].sf_ieee) { case QED_DCBX_SF_IEEE_ETHTYPE: *entry |= ((u32)DCBX_APP_SF_IEEE_ETHTYPE << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_ETHTYPE << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_TCP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_TCP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_UDP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_UDP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_TCP_UDP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_TCP_UDP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; } } else { -- cgit v1.2.3-58-ga151 From c5e801dac4daff972013613ae3edae6668b2aa7c Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 29 Aug 2016 08:29:54 -0400 Subject: qed: Clear dcbx memory buffers before the usage. This patch takes care of clearing the uninitialized buffer before using it. 1. pfc pri-enable bitmap need to be cleared before setting the requested enable bits. Without this, the un-touched values will be merged with requested values and sent to MFW. 2. The data in app-entry field need to be cleared before using it. 3. Clear the output data buffer used in qed_dcbx_query_params(). Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 192a886edfe9..ad023fe7d156 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -988,6 +988,7 @@ qed_dcbx_set_pfc_data(struct qed_hwfn *p_hwfn, if (p_params->pfc.prio[i]) pfc_map |= BIT(i); + *pfc &= ~DCBX_PFC_PRI_EN_BITMAP_MASK; *pfc |= (pfc_map << DCBX_PFC_PRI_EN_BITMAP_SHIFT); DP_VERBOSE(p_hwfn, QED_MSG_DCB, "pfc = 0x%x\n", *pfc); @@ -1062,6 +1063,7 @@ qed_dcbx_set_app_data(struct qed_hwfn *p_hwfn, for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { entry = &p_app->app_pri_tbl[i].entry; + *entry = 0; if (ieee) { *entry &= ~(DCBX_APP_SF_IEEE_MASK | DCBX_APP_SF_MASK); switch (p_params->app_entry[i].sf_ieee) { @@ -1193,6 +1195,7 @@ int qed_dcbx_get_config_params(struct qed_hwfn *p_hwfn, return -ENOMEM; } + memset(dcbx_info, 0, sizeof(*dcbx_info)); rc = qed_dcbx_query_params(p_hwfn, dcbx_info, QED_DCBX_OPERATIONAL_MIB); if (rc) { kfree(dcbx_info); @@ -1230,6 +1233,7 @@ static struct qed_dcbx_get *qed_dcbnl_get_dcbx(struct qed_hwfn *hwfn, return NULL; } + memset(dcbx_info, 0, sizeof(*dcbx_info)); if (qed_dcbx_query_params(hwfn, dcbx_info, type)) { kfree(dcbx_info); return NULL; -- cgit v1.2.3-58-ga151 From 5b004412e2b7894105ea6043d380b7ab21f244ef Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 1 Sep 2016 10:37:40 +0200 Subject: mlxsw: spectrum_router: Fix failure caused by double fib removal from HW In mlxsw we squash tables 254 and 255 together into HW. Kernel adds/dels /32 ip to/from both 254 and 255. On del path, that causes the same prefix being removed twice. Fix this by introducing reference counting for private mlxsw fib entries. That required a bit of code reshuffle. Also put dev into fib entry key so the same prefix could be represented once per every router interface. Fixes: 61c503f976b5 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 126 +++++++++++++++------ 1 file changed, 92 insertions(+), 34 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 917ddd1e422f..ed618144fed4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -107,6 +107,7 @@ mlxsw_sp_prefix_usage_clear(struct mlxsw_sp_prefix_usage *prefix_usage, } struct mlxsw_sp_fib_key { + struct net_device *dev; unsigned char addr[sizeof(struct in6_addr)]; unsigned char prefix_len; }; @@ -123,6 +124,7 @@ struct mlxsw_sp_fib_entry { struct rhash_head ht_node; struct mlxsw_sp_fib_key key; enum mlxsw_sp_fib_entry_type type; + unsigned int ref_count; u8 added:1; u16 rif; /* used for action local */ struct mlxsw_sp_vr *vr; @@ -171,13 +173,15 @@ static void mlxsw_sp_fib_entry_remove(struct mlxsw_sp_fib *fib, static struct mlxsw_sp_fib_entry * mlxsw_sp_fib_entry_create(struct mlxsw_sp_fib *fib, const void *addr, - size_t addr_len, unsigned char prefix_len) + size_t addr_len, unsigned char prefix_len, + struct net_device *dev) { struct mlxsw_sp_fib_entry *fib_entry; fib_entry = kzalloc(sizeof(*fib_entry), GFP_KERNEL); if (!fib_entry) return NULL; + fib_entry->key.dev = dev; memcpy(fib_entry->key.addr, addr, addr_len); fib_entry->key.prefix_len = prefix_len; return fib_entry; @@ -190,10 +194,13 @@ static void mlxsw_sp_fib_entry_destroy(struct mlxsw_sp_fib_entry *fib_entry) static struct mlxsw_sp_fib_entry * mlxsw_sp_fib_entry_lookup(struct mlxsw_sp_fib *fib, const void *addr, - size_t addr_len, unsigned char prefix_len) + size_t addr_len, unsigned char prefix_len, + struct net_device *dev) { - struct mlxsw_sp_fib_key key = {{ 0 } }; + struct mlxsw_sp_fib_key key; + memset(&key, 0, sizeof(key)); + key.dev = dev; memcpy(key.addr, addr, addr_len); key.prefix_len = prefix_len; return rhashtable_lookup_fast(&fib->ht, &key, mlxsw_sp_fib_ht_params); @@ -1695,34 +1702,93 @@ mlxsw_sp_router_fib4_entry_fini(struct mlxsw_sp *mlxsw_sp, mlxsw_sp_nexthop_group_put(mlxsw_sp, fib_entry); } -static int -mlxsw_sp_router_fib4_add_prepare(struct mlxsw_sp_port *mlxsw_sp_port, - const struct switchdev_obj_ipv4_fib *fib4, - struct switchdev_trans *trans) +static struct mlxsw_sp_fib_entry * +mlxsw_sp_fib_entry_get(struct mlxsw_sp *mlxsw_sp, + const struct switchdev_obj_ipv4_fib *fib4) { - struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; - struct mlxsw_sp_router_fib4_add_info *info; struct mlxsw_sp_fib_entry *fib_entry; + struct fib_info *fi = fib4->fi; struct mlxsw_sp_vr *vr; int err; vr = mlxsw_sp_vr_get(mlxsw_sp, fib4->dst_len, fib4->tb_id, MLXSW_SP_L3_PROTO_IPV4); if (IS_ERR(vr)) - return PTR_ERR(vr); + return ERR_CAST(vr); + fib_entry = mlxsw_sp_fib_entry_lookup(vr->fib, &fib4->dst, + sizeof(fib4->dst), + fib4->dst_len, fi->fib_dev); + if (fib_entry) { + /* Already exists, just take a reference */ + fib_entry->ref_count++; + return fib_entry; + } fib_entry = mlxsw_sp_fib_entry_create(vr->fib, &fib4->dst, - sizeof(fib4->dst), fib4->dst_len); + sizeof(fib4->dst), + fib4->dst_len, fi->fib_dev); if (!fib_entry) { err = -ENOMEM; goto err_fib_entry_create; } fib_entry->vr = vr; + fib_entry->ref_count = 1; err = mlxsw_sp_router_fib4_entry_init(mlxsw_sp, fib4, fib_entry); if (err) goto err_fib4_entry_init; + return fib_entry; + +err_fib4_entry_init: + mlxsw_sp_fib_entry_destroy(fib_entry); +err_fib_entry_create: + mlxsw_sp_vr_put(mlxsw_sp, vr); + + return ERR_PTR(err); +} + +static struct mlxsw_sp_fib_entry * +mlxsw_sp_fib_entry_find(struct mlxsw_sp *mlxsw_sp, + const struct switchdev_obj_ipv4_fib *fib4) +{ + struct mlxsw_sp_vr *vr; + + vr = mlxsw_sp_vr_find(mlxsw_sp, fib4->tb_id, MLXSW_SP_L3_PROTO_IPV4); + if (!vr) + return NULL; + + return mlxsw_sp_fib_entry_lookup(vr->fib, &fib4->dst, + sizeof(fib4->dst), fib4->dst_len, + fib4->fi->fib_dev); +} + +void mlxsw_sp_fib_entry_put(struct mlxsw_sp *mlxsw_sp, + struct mlxsw_sp_fib_entry *fib_entry) +{ + struct mlxsw_sp_vr *vr = fib_entry->vr; + + if (--fib_entry->ref_count == 0) { + mlxsw_sp_router_fib4_entry_fini(mlxsw_sp, fib_entry); + mlxsw_sp_fib_entry_destroy(fib_entry); + } + mlxsw_sp_vr_put(mlxsw_sp, vr); +} + +static int +mlxsw_sp_router_fib4_add_prepare(struct mlxsw_sp_port *mlxsw_sp_port, + const struct switchdev_obj_ipv4_fib *fib4, + struct switchdev_trans *trans) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + struct mlxsw_sp_router_fib4_add_info *info; + struct mlxsw_sp_fib_entry *fib_entry; + int err; + + fib_entry = mlxsw_sp_fib_entry_get(mlxsw_sp, fib4); + if (IS_ERR(fib_entry)) + return PTR_ERR(fib_entry); + info = kmalloc(sizeof(*info), GFP_KERNEL); if (!info) { err = -ENOMEM; @@ -1736,11 +1802,7 @@ mlxsw_sp_router_fib4_add_prepare(struct mlxsw_sp_port *mlxsw_sp_port, return 0; err_alloc_info: - mlxsw_sp_router_fib4_entry_fini(mlxsw_sp, fib_entry); -err_fib4_entry_init: - mlxsw_sp_fib_entry_destroy(fib_entry); -err_fib_entry_create: - mlxsw_sp_vr_put(mlxsw_sp, vr); + mlxsw_sp_fib_entry_put(mlxsw_sp, fib_entry); return err; } @@ -1759,11 +1821,14 @@ mlxsw_sp_router_fib4_add_commit(struct mlxsw_sp_port *mlxsw_sp_port, fib_entry = info->fib_entry; kfree(info); + if (fib_entry->ref_count != 1) + return 0; + vr = fib_entry->vr; - err = mlxsw_sp_fib_entry_insert(fib_entry->vr->fib, fib_entry); + err = mlxsw_sp_fib_entry_insert(vr->fib, fib_entry); if (err) goto err_fib_entry_insert; - err = mlxsw_sp_fib_entry_update(mlxsw_sp, fib_entry); + err = mlxsw_sp_fib_entry_update(mlxsw_sp_port->mlxsw_sp, fib_entry); if (err) goto err_fib_entry_add; return 0; @@ -1771,9 +1836,7 @@ mlxsw_sp_router_fib4_add_commit(struct mlxsw_sp_port *mlxsw_sp_port, err_fib_entry_add: mlxsw_sp_fib_entry_remove(vr->fib, fib_entry); err_fib_entry_insert: - mlxsw_sp_router_fib4_entry_fini(mlxsw_sp, fib_entry); - mlxsw_sp_fib_entry_destroy(fib_entry); - mlxsw_sp_vr_put(mlxsw_sp, vr); + mlxsw_sp_fib_entry_put(mlxsw_sp, fib_entry); return err; } @@ -1793,23 +1856,18 @@ int mlxsw_sp_router_fib4_del(struct mlxsw_sp_port *mlxsw_sp_port, { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; struct mlxsw_sp_fib_entry *fib_entry; - struct mlxsw_sp_vr *vr; - vr = mlxsw_sp_vr_find(mlxsw_sp, fib4->tb_id, MLXSW_SP_L3_PROTO_IPV4); - if (!vr) { - dev_warn(mlxsw_sp->bus_info->dev, "Failed to find virtual router for FIB4 entry being removed.\n"); - return -ENOENT; - } - fib_entry = mlxsw_sp_fib_entry_lookup(vr->fib, &fib4->dst, - sizeof(fib4->dst), fib4->dst_len); + fib_entry = mlxsw_sp_fib_entry_find(mlxsw_sp, fib4); if (!fib_entry) { dev_warn(mlxsw_sp->bus_info->dev, "Failed to find FIB4 entry being removed.\n"); return -ENOENT; } - mlxsw_sp_fib_entry_del(mlxsw_sp_port->mlxsw_sp, fib_entry); - mlxsw_sp_fib_entry_remove(vr->fib, fib_entry); - mlxsw_sp_router_fib4_entry_fini(mlxsw_sp, fib_entry); - mlxsw_sp_fib_entry_destroy(fib_entry); - mlxsw_sp_vr_put(mlxsw_sp, vr); + + if (fib_entry->ref_count == 1) { + mlxsw_sp_fib_entry_del(mlxsw_sp, fib_entry); + mlxsw_sp_fib_entry_remove(fib_entry->vr->fib, fib_entry); + } + + mlxsw_sp_fib_entry_put(mlxsw_sp, fib_entry); return 0; } -- cgit v1.2.3-58-ga151 From 7146da31817aa21b19d7a01e95b94686c3f4bd97 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 1 Sep 2016 10:37:41 +0200 Subject: mlxsw: spectrum_router: Fix fib entry update path Originally, I expected that there would be needed to call update operation in case RALUE record action is changed. However, that is not needed since write operation takes care of that nicely. Remove prepared construct and always call the write operation. Fixes: 61c503f976b5 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index ed618144fed4..49f4e06e5842 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -125,7 +125,6 @@ struct mlxsw_sp_fib_entry { struct mlxsw_sp_fib_key key; enum mlxsw_sp_fib_entry_type type; unsigned int ref_count; - u8 added:1; u16 rif; /* used for action local */ struct mlxsw_sp_vr *vr; struct list_head nexthop_group_node; @@ -1633,11 +1632,8 @@ static int mlxsw_sp_fib_entry_op(struct mlxsw_sp *mlxsw_sp, static int mlxsw_sp_fib_entry_update(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_fib_entry *fib_entry) { - enum mlxsw_reg_ralue_op op; - - op = !fib_entry->added ? MLXSW_REG_RALUE_OP_WRITE_WRITE : - MLXSW_REG_RALUE_OP_WRITE_UPDATE; - return mlxsw_sp_fib_entry_op(mlxsw_sp, fib_entry, op); + return mlxsw_sp_fib_entry_op(mlxsw_sp, fib_entry, + MLXSW_REG_RALUE_OP_WRITE_WRITE); } static int mlxsw_sp_fib_entry_del(struct mlxsw_sp *mlxsw_sp, -- cgit v1.2.3-58-ga151 From de7d62952b01755f9885bbe945b141d9d4338e55 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 1 Sep 2016 10:37:42 +0200 Subject: mlxsw: spectrum: Fix error path in mlxsw_sp_module_init Add forgotten notifier unregister. Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 7291f2c4b0c7..ec1f7d88948f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -4553,6 +4553,7 @@ static int __init mlxsw_sp_module_init(void) return 0; err_core_driver_register: + unregister_inetaddr_notifier(&mlxsw_sp_inetaddr_nb); unregister_netdevice_notifier(&mlxsw_sp_netdevice_nb); return err; } -- cgit v1.2.3-58-ga151 From e73226384948e9b35823150cadd9a3ea4ca9fc97 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 1 Sep 2016 10:37:43 +0200 Subject: mlxsw: spectrum_router: Fix netevent notifier registration Currently the notifier is registered for every asic instance, however the same block. Fix this by moving the registration to module init. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 9 +++++++++ drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 2 ++ drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 17 ++--------------- 3 files changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index ec1f7d88948f..e16b34718c8c 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -56,6 +56,7 @@ #include #include #include +#include #include "spectrum.h" #include "core.h" @@ -4541,18 +4542,25 @@ static struct notifier_block mlxsw_sp_inetaddr_nb __read_mostly = { .priority = 10, /* Must be called before FIB notifier block */ }; +static struct notifier_block mlxsw_sp_router_netevent_nb __read_mostly = { + .notifier_call = mlxsw_sp_router_netevent_event, +}; + static int __init mlxsw_sp_module_init(void) { int err; register_netdevice_notifier(&mlxsw_sp_netdevice_nb); register_inetaddr_notifier(&mlxsw_sp_inetaddr_nb); + register_netevent_notifier(&mlxsw_sp_router_netevent_nb); + err = mlxsw_core_driver_register(&mlxsw_sp_driver); if (err) goto err_core_driver_register; return 0; err_core_driver_register: + unregister_netevent_notifier(&mlxsw_sp_router_netevent_nb); unregister_inetaddr_notifier(&mlxsw_sp_inetaddr_nb); unregister_netdevice_notifier(&mlxsw_sp_netdevice_nb); return err; @@ -4561,6 +4569,7 @@ err_core_driver_register: static void __exit mlxsw_sp_module_exit(void) { mlxsw_core_driver_unregister(&mlxsw_sp_driver); + unregister_netevent_notifier(&mlxsw_sp_router_netevent_nb); unregister_inetaddr_notifier(&mlxsw_sp_inetaddr_nb); unregister_netdevice_notifier(&mlxsw_sp_netdevice_nb); } diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index ab3feb81bd43..ac48abebe904 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -587,6 +587,8 @@ int mlxsw_sp_router_neigh_construct(struct net_device *dev, struct neighbour *n); void mlxsw_sp_router_neigh_destroy(struct net_device *dev, struct neighbour *n); +int mlxsw_sp_router_netevent_event(struct notifier_block *unused, + unsigned long event, void *ptr); int mlxsw_sp_kvdl_alloc(struct mlxsw_sp *mlxsw_sp, unsigned int entry_count); void mlxsw_sp_kvdl_free(struct mlxsw_sp *mlxsw_sp, int entry_index); diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 49f4e06e5842..352259b3c38a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -944,8 +944,8 @@ static void mlxsw_sp_router_neigh_update_hw(struct work_struct *work) mlxsw_sp_port_dev_put(mlxsw_sp_port); } -static int mlxsw_sp_router_netevent_event(struct notifier_block *unused, - unsigned long event, void *ptr) +int mlxsw_sp_router_netevent_event(struct notifier_block *unused, + unsigned long event, void *ptr) { struct mlxsw_sp_neigh_entry *neigh_entry; struct mlxsw_sp_port *mlxsw_sp_port; @@ -1015,10 +1015,6 @@ static int mlxsw_sp_router_netevent_event(struct notifier_block *unused, return NOTIFY_DONE; } -static struct notifier_block mlxsw_sp_router_netevent_nb __read_mostly = { - .notifier_call = mlxsw_sp_router_netevent_event, -}; - static int mlxsw_sp_neigh_init(struct mlxsw_sp *mlxsw_sp) { int err; @@ -1033,10 +1029,6 @@ static int mlxsw_sp_neigh_init(struct mlxsw_sp *mlxsw_sp) */ mlxsw_sp_router_neighs_update_interval_init(mlxsw_sp); - err = register_netevent_notifier(&mlxsw_sp_router_netevent_nb); - if (err) - goto err_register_netevent_notifier; - /* Create the delayed works for the activity_update */ INIT_DELAYED_WORK(&mlxsw_sp->router.neighs_update.dw, mlxsw_sp_router_neighs_update_work); @@ -1045,17 +1037,12 @@ static int mlxsw_sp_neigh_init(struct mlxsw_sp *mlxsw_sp) mlxsw_core_schedule_dw(&mlxsw_sp->router.neighs_update.dw, 0); mlxsw_core_schedule_dw(&mlxsw_sp->router.nexthop_probe_dw, 0); return 0; - -err_register_netevent_notifier: - rhashtable_destroy(&mlxsw_sp->router.neigh_ht); - return err; } static void mlxsw_sp_neigh_fini(struct mlxsw_sp *mlxsw_sp) { cancel_delayed_work_sync(&mlxsw_sp->router.neighs_update.dw); cancel_delayed_work_sync(&mlxsw_sp->router.nexthop_probe_dw); - unregister_netevent_notifier(&mlxsw_sp_router_netevent_nb); rhashtable_destroy(&mlxsw_sp->router.neigh_ht); } -- cgit v1.2.3-58-ga151 From f1de7a28d53cfde8fa290d6c535eb690a4e1b5d5 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 1 Sep 2016 10:37:44 +0200 Subject: mlxsw: spectrum: Don't take multiple references on a FID In commit 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") I added a per-FID struct, which member ports can take a reference on upon VLAN membership configuration. However, sometimes only the VLAN flags (e.g. egress untagged) are toggled without changing the VLAN membership. In these cases we shouldn't take another reference on the FID. Fixes: 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index d1b59cdfacc1..e0d95c419634 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -460,6 +460,9 @@ static int __mlxsw_sp_port_fid_join(struct mlxsw_sp_port *mlxsw_sp_port, { struct mlxsw_sp_fid *f; + if (test_bit(fid, mlxsw_sp_port->active_vlans)) + return 0; + f = mlxsw_sp_fid_find(mlxsw_sp_port->mlxsw_sp, fid); if (!f) { f = mlxsw_sp_fid_create(mlxsw_sp_port->mlxsw_sp, fid); -- cgit v1.2.3-58-ga151 From aad8b6bae7c63fcf860c4c7ce693cb8ac5d4a511 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 1 Sep 2016 10:37:45 +0200 Subject: mlxsw: spectrum: Use existing flood setup when adding VLANs When a VLAN is added on a bridge port we should use the existing unicast flood configuration of the port instead of assuming it's enabled. Fixes: 0293038e0c36 ("mlxsw: spectrum: Add support for flood control") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 25 ++++++++-------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index e0d95c419634..7b654c517b91 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -167,8 +167,8 @@ static int mlxsw_sp_port_attr_stp_state_set(struct mlxsw_sp_port *mlxsw_sp_port, } static int __mlxsw_sp_port_flood_set(struct mlxsw_sp_port *mlxsw_sp_port, - u16 idx_begin, u16 idx_end, bool set, - bool only_uc) + u16 idx_begin, u16 idx_end, bool uc_set, + bool bm_set) { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; u16 local_port = mlxsw_sp_port->local_port; @@ -187,28 +187,22 @@ static int __mlxsw_sp_port_flood_set(struct mlxsw_sp_port *mlxsw_sp_port, return -ENOMEM; mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_UC, idx_begin, - table_type, range, local_port, set); + table_type, range, local_port, uc_set); err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); if (err) goto buffer_out; - /* Flooding control allows one to decide whether a given port will - * flood unicast traffic for which there is no FDB entry. - */ - if (only_uc) - goto buffer_out; - mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_BM, idx_begin, - table_type, range, local_port, set); + table_type, range, local_port, bm_set); err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); if (err) goto err_flood_bm_set; - else - goto buffer_out; + + goto buffer_out; err_flood_bm_set: mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_UC, idx_begin, - table_type, range, local_port, !set); + table_type, range, local_port, !uc_set); mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); buffer_out: kfree(sftr_pl); @@ -257,8 +251,7 @@ int mlxsw_sp_vport_flood_set(struct mlxsw_sp_port *mlxsw_sp_vport, u16 fid, * the start of the vFIDs range. */ vfid = mlxsw_sp_fid_to_vfid(fid); - return __mlxsw_sp_port_flood_set(mlxsw_sp_vport, vfid, vfid, set, - false); + return __mlxsw_sp_port_flood_set(mlxsw_sp_vport, vfid, vfid, set, set); } static int mlxsw_sp_port_attr_br_flags_set(struct mlxsw_sp_port *mlxsw_sp_port, @@ -520,7 +513,7 @@ static int mlxsw_sp_port_fid_join(struct mlxsw_sp_port *mlxsw_sp_port, } err = __mlxsw_sp_port_flood_set(mlxsw_sp_port, fid_begin, fid_end, - true, false); + mlxsw_sp_port->uc_flood, true); if (err) goto err_port_flood_set; -- cgit v1.2.3-58-ga151 From 561ed23331dfefea4c8eec616463ee4d0c8fa4b7 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Thu, 1 Sep 2016 14:45:12 +0800 Subject: qed: fix kzalloc-simple.cocci warnings drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1230:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1192:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset Use kzalloc rather than kmalloc followed by memset with 0 This considers some simple cases that are common and easy to validate Note in particular that there are no ...s in the rule, so all of the matched code has to be contiguous Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci CC: Sudarsana Reddy Kalluru Signed-off-by: Fengguang Wu Acked-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index ad023fe7d156..3656d2fd673d 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -1189,13 +1189,12 @@ int qed_dcbx_get_config_params(struct qed_hwfn *p_hwfn, return 0; } - dcbx_info = kmalloc(sizeof(*dcbx_info), GFP_KERNEL); + dcbx_info = kzalloc(sizeof(*dcbx_info), GFP_KERNEL); if (!dcbx_info) { DP_ERR(p_hwfn, "Failed to allocate struct qed_dcbx_info\n"); return -ENOMEM; } - memset(dcbx_info, 0, sizeof(*dcbx_info)); rc = qed_dcbx_query_params(p_hwfn, dcbx_info, QED_DCBX_OPERATIONAL_MIB); if (rc) { kfree(dcbx_info); @@ -1227,13 +1226,12 @@ static struct qed_dcbx_get *qed_dcbnl_get_dcbx(struct qed_hwfn *hwfn, { struct qed_dcbx_get *dcbx_info; - dcbx_info = kmalloc(sizeof(*dcbx_info), GFP_KERNEL); + dcbx_info = kzalloc(sizeof(*dcbx_info), GFP_KERNEL); if (!dcbx_info) { DP_ERR(hwfn->cdev, "Failed to allocate memory for dcbx_info\n"); return NULL; } - memset(dcbx_info, 0, sizeof(*dcbx_info)); if (qed_dcbx_query_params(hwfn, dcbx_info, type)) { kfree(dcbx_info); return NULL; -- cgit v1.2.3-58-ga151 From aabdd09d535073c35f746e46c3a5d3286088be3a Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 1 Sep 2016 11:28:59 +0200 Subject: tg3: Fix for disallow tx coalescing time to be 0 The recent commit 087d7a8c9174 "tg3: Fix for diasllow rx coalescing time to be 0" disallow to set Rx coalescing time to be 0 as this stops generating interrupts for the incoming packets. I found the zero Tx coalescing time stops generating interrupts for outgoing packets as well and fires Tx watchdog later. To avoid this, don't allow to set Tx coalescing time to 0 and also remove subsequent checks that become senseless. Cc: satish.baddipadige@broadcom.com Cc: siva.kallam@broadcom.com Cc: michael.chan@broadcom.com Signed-off-by: Ivan Vecera Acked-by: Siva Reddy Kallam Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 659261218d9f..a2551bcd1027 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14012,6 +14012,7 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) if ((ec->rx_coalesce_usecs > MAX_RXCOL_TICKS) || (!ec->rx_coalesce_usecs) || (ec->tx_coalesce_usecs > MAX_TXCOL_TICKS) || + (!ec->tx_coalesce_usecs) || (ec->rx_max_coalesced_frames > MAX_RXMAX_FRAMES) || (ec->tx_max_coalesced_frames > MAX_TXMAX_FRAMES) || (ec->rx_coalesce_usecs_irq > max_rxcoal_tick_int) || @@ -14022,16 +14023,6 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) (ec->stats_block_coalesce_usecs < min_stat_coal_ticks)) return -EINVAL; - /* No rx interrupts will be generated if both are zero */ - if ((ec->rx_coalesce_usecs == 0) && - (ec->rx_max_coalesced_frames == 0)) - return -EINVAL; - - /* No tx interrupts will be generated if both are zero */ - if ((ec->tx_coalesce_usecs == 0) && - (ec->tx_max_coalesced_frames == 0)) - return -EINVAL; - /* Only copy relevant parameters, ignore all others. */ tp->coal.rx_coalesce_usecs = ec->rx_coalesce_usecs; tp->coal.tx_coalesce_usecs = ec->tx_coalesce_usecs; -- cgit v1.2.3-58-ga151 From a036244c068612a43fa8c0f33a0eb4daa4d8dba0 Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Mon, 29 Aug 2016 17:38:26 -0700 Subject: i40e: Fix kernel panic on enable/disable LLDP If DCB is configured on the link partner switch with an unsupported traffic class configuration (e.g. non-contiguous TCs), the driver is flagging DCB as disabled. But, for future DCB LLDPDUs, the driver was checking if the interface was DCB capable instead of enabled. This was causing a kernel panic when LLDP was enabled/disabled on the link partner switch. This patch corrects the situation by having the LLDP event handler check the correct flag in the pf structure. It also cleans up the setting and clearing of the enabled flag for other checks. Signed-off-by: Dave Ertman Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_main.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 828ed28c3c14..d0b3a1bb82ca 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5113,9 +5113,13 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf) DCB_CAP_DCBX_VER_IEEE; pf->flags |= I40E_FLAG_DCB_CAPABLE; - /* Enable DCB tagging only when more than one TC */ + /* Enable DCB tagging only when more than one TC + * or explicitly disable if only one TC + */ if (i40e_dcb_get_num_tc(&hw->local_dcbx_config) > 1) pf->flags |= I40E_FLAG_DCB_ENABLED; + else + pf->flags &= ~I40E_FLAG_DCB_ENABLED; dev_dbg(&pf->pdev->dev, "DCBX offload is supported for this PF.\n"); } @@ -5716,7 +5720,7 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf, u8 type; /* Not DCB capable or capability disabled */ - if (!(pf->flags & I40E_FLAG_DCB_CAPABLE)) + if (!(pf->flags & I40E_FLAG_DCB_ENABLED)) return ret; /* Ignore if event is not for Nearest Bridge */ @@ -7896,6 +7900,7 @@ static int i40e_init_interrupt_scheme(struct i40e_pf *pf) #endif I40E_FLAG_RSS_ENABLED | I40E_FLAG_DCB_CAPABLE | + I40E_FLAG_DCB_ENABLED | I40E_FLAG_SRIOV_ENABLED | I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED | @@ -10502,6 +10507,7 @@ static void i40e_determine_queue_usage(struct i40e_pf *pf) I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED | I40E_FLAG_DCB_CAPABLE | + I40E_FLAG_DCB_ENABLED | I40E_FLAG_SRIOV_ENABLED | I40E_FLAG_VMDQ_ENABLED); } else if (!(pf->flags & (I40E_FLAG_RSS_ENABLED | @@ -10525,7 +10531,8 @@ static void i40e_determine_queue_usage(struct i40e_pf *pf) /* Not enough queues for all TCs */ if ((pf->flags & I40E_FLAG_DCB_CAPABLE) && (queues_left < I40E_MAX_TRAFFIC_CLASS)) { - pf->flags &= ~I40E_FLAG_DCB_CAPABLE; + pf->flags &= ~(I40E_FLAG_DCB_CAPABLE | + I40E_FLAG_DCB_ENABLED); dev_info(&pf->pdev->dev, "not enough queues for DCB. DCB is disabled.\n"); } pf->num_lan_qps = max_t(int, pf->rss_size_max, @@ -10922,7 +10929,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = i40e_init_pf_dcb(pf); if (err) { dev_info(&pdev->dev, "DCB init failed %d, disabled\n", err); - pf->flags &= ~I40E_FLAG_DCB_CAPABLE; + pf->flags &= ~(I40E_FLAG_DCB_CAPABLE & I40E_FLAG_DCB_ENABLED); /* Continue without DCB enabled */ } #endif /* CONFIG_I40E_DCB */ -- cgit v1.2.3-58-ga151 From 57e81d44b0e1aa4dcb479ff8de8fc34cf635d0e8 Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Tue, 30 Aug 2016 11:36:26 +0530 Subject: net: thunderx: Fix for HW issue while padding TSO packet There is a issue in HW where-in while sending GSO sized pkts as part of TSO, if pkt len falls below configured min packet size i.e 60, NIC will zero PAD packet and also updates IP total length. Hence set this value to lessthan min pkt size of MAC + IP + TCP headers, BGX will anyway do the padding to transmit 64 byte pkt including FCS. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic_main.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 16ed20357c5c..85cc782b9060 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -251,9 +251,14 @@ static void nic_set_tx_pkt_pad(struct nicpf *nic, int size) int lmac; u64 lmac_cfg; - /* Max value that can be set is 60 */ - if (size > 60) - size = 60; + /* There is a issue in HW where-in while sending GSO sized + * pkts as part of TSO, if pkt len falls below this size + * NIC will zero PAD packet and also updates IP total length. + * Hence set this value to lessthan min pkt size of MAC+IP+TCP + * headers, BGX will do the padding to transmit 64 byte pkt. + */ + if (size > 52) + size = 52; for (lmac = 0; lmac < (MAX_BGX_PER_CN88XX * MAX_LMAC_PER_BGX); lmac++) { lmac_cfg = nic_reg_read(nic, NIC_PF_LMAC_0_7_CFG | (lmac << 3)); -- cgit v1.2.3-58-ga151 From 7ceb8a1319ec64954459d474dd4a8c3c60ff0999 Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Tue, 30 Aug 2016 11:36:27 +0530 Subject: net: thunderx: Fix for issues with multiple CQEs posted for a TSO packet On ThunderX 88xx pass 2.x chips when TSO is offloaded to HW, HW posts a CQE for every TSO segment transmitted. Current code does handles this, but is prone to issues when segment sizes are small resulting in SW processing too many CQEs and also at times frees a SKB which is not yet transmitted. This patch handles the errata in a different way and eliminates issues with earlier approach, TSO packet is submitted to HW with post_cqe=0, so that no CQE is posted upon completion of transmission of TSO packet but a additional HDR + IMMEDIATE descriptors are added to SQ due to which a CQE is posted and will have required info to be used while cleanup in napi. This way only one CQE is posted for a TSO packet. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic.h | 1 + drivers/net/ethernet/cavium/thunder/nicvf_main.c | 20 +++++-- drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 64 +++++++++++++++++++--- 3 files changed, 73 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h index 83025bb4737c..e29815d9e6f4 100644 --- a/drivers/net/ethernet/cavium/thunder/nic.h +++ b/drivers/net/ethernet/cavium/thunder/nic.h @@ -279,6 +279,7 @@ struct nicvf { u8 sqs_id; bool sqs_mode; bool hw_tso; + bool t88; /* Receive buffer alloc */ u32 rb_page_offset; diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c index a19e73f11d73..3240349615bd 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c @@ -513,6 +513,7 @@ static void nicvf_snd_pkt_handler(struct net_device *netdev, struct nicvf *nic = netdev_priv(netdev); struct snd_queue *sq; struct sq_hdr_subdesc *hdr; + struct sq_hdr_subdesc *tso_sqe; sq = &nic->qs->sq[cqe_tx->sq_idx]; @@ -527,17 +528,21 @@ static void nicvf_snd_pkt_handler(struct net_device *netdev, nicvf_check_cqe_tx_errs(nic, cq, cqe_tx); skb = (struct sk_buff *)sq->skbuff[cqe_tx->sqe_ptr]; - /* For TSO offloaded packets only one SQE will have a valid SKB */ if (skb) { + /* Check for dummy descriptor used for HW TSO offload on 88xx */ + if (hdr->dont_send) { + /* Get actual TSO descriptors and free them */ + tso_sqe = + (struct sq_hdr_subdesc *)GET_SQ_DESC(sq, hdr->rsvd2); + nicvf_put_sq_desc(sq, tso_sqe->subdesc_cnt + 1); + } nicvf_put_sq_desc(sq, hdr->subdesc_cnt + 1); prefetch(skb); dev_consume_skb_any(skb); sq->skbuff[cqe_tx->sqe_ptr] = (u64)NULL; } else { - /* In case of HW TSO, HW sends a CQE for each segment of a TSO - * packet instead of a single CQE for the whole TSO packet - * transmitted. Each of this CQE points to the same SQE, so - * avoid freeing same SQE multiple times. + /* In case of SW TSO on 88xx, only last segment will have + * a SKB attached, so just free SQEs here. */ if (!nic->hw_tso) nicvf_put_sq_desc(sq, hdr->subdesc_cnt + 1); @@ -1502,6 +1507,7 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct net_device *netdev; struct nicvf *nic; int err, qcount; + u16 sdevid; err = pci_enable_device(pdev); if (err) { @@ -1575,6 +1581,10 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!pass1_silicon(nic->pdev)) nic->hw_tso = true; + pci_read_config_word(nic->pdev, PCI_SUBSYSTEM_ID, &sdevid); + if (sdevid == 0xA134) + nic->t88 = true; + /* Check if this VF is in QS only mode */ if (nic->sqs_mode) return 0; diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index 0ff8e60deccb..dda3ea3f3bb6 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -938,6 +938,8 @@ static int nicvf_tso_count_subdescs(struct sk_buff *skb) return num_edescs + sh->gso_segs; } +#define POST_CQE_DESC_COUNT 2 + /* Get the number of SQ descriptors needed to xmit this skb */ static int nicvf_sq_subdesc_required(struct nicvf *nic, struct sk_buff *skb) { @@ -948,6 +950,10 @@ static int nicvf_sq_subdesc_required(struct nicvf *nic, struct sk_buff *skb) return subdesc_cnt; } + /* Dummy descriptors to get TSO pkt completion notification */ + if (nic->t88 && nic->hw_tso && skb_shinfo(skb)->gso_size) + subdesc_cnt += POST_CQE_DESC_COUNT; + if (skb_shinfo(skb)->nr_frags) subdesc_cnt += skb_shinfo(skb)->nr_frags; @@ -965,14 +971,21 @@ nicvf_sq_add_hdr_subdesc(struct nicvf *nic, struct snd_queue *sq, int qentry, struct sq_hdr_subdesc *hdr; hdr = (struct sq_hdr_subdesc *)GET_SQ_DESC(sq, qentry); - sq->skbuff[qentry] = (u64)skb; - memset(hdr, 0, SND_QUEUE_DESC_SIZE); hdr->subdesc_type = SQ_DESC_TYPE_HEADER; - /* Enable notification via CQE after processing SQE */ - hdr->post_cqe = 1; - /* No of subdescriptors following this */ - hdr->subdesc_cnt = subdesc_cnt; + + if (nic->t88 && nic->hw_tso && skb_shinfo(skb)->gso_size) { + /* post_cqe = 0, to avoid HW posting a CQE for every TSO + * segment transmitted on 88xx. + */ + hdr->subdesc_cnt = subdesc_cnt - POST_CQE_DESC_COUNT; + } else { + sq->skbuff[qentry] = (u64)skb; + /* Enable notification via CQE after processing SQE */ + hdr->post_cqe = 1; + /* No of subdescriptors following this */ + hdr->subdesc_cnt = subdesc_cnt; + } hdr->tot_len = len; /* Offload checksum calculation to HW */ @@ -1023,6 +1036,37 @@ static inline void nicvf_sq_add_gather_subdesc(struct snd_queue *sq, int qentry, gather->addr = data; } +/* Add HDR + IMMEDIATE subdescriptors right after descriptors of a TSO + * packet so that a CQE is posted as a notifation for transmission of + * TSO packet. + */ +static inline void nicvf_sq_add_cqe_subdesc(struct snd_queue *sq, int qentry, + int tso_sqe, struct sk_buff *skb) +{ + struct sq_imm_subdesc *imm; + struct sq_hdr_subdesc *hdr; + + sq->skbuff[qentry] = (u64)skb; + + hdr = (struct sq_hdr_subdesc *)GET_SQ_DESC(sq, qentry); + memset(hdr, 0, SND_QUEUE_DESC_SIZE); + hdr->subdesc_type = SQ_DESC_TYPE_HEADER; + /* Enable notification via CQE after processing SQE */ + hdr->post_cqe = 1; + /* There is no packet to transmit here */ + hdr->dont_send = 1; + hdr->subdesc_cnt = POST_CQE_DESC_COUNT - 1; + hdr->tot_len = 1; + /* Actual TSO header SQE index, needed for cleanup */ + hdr->rsvd2 = tso_sqe; + + qentry = nicvf_get_nxt_sqentry(sq, qentry); + imm = (struct sq_imm_subdesc *)GET_SQ_DESC(sq, qentry); + memset(imm, 0, SND_QUEUE_DESC_SIZE); + imm->subdesc_type = SQ_DESC_TYPE_IMMEDIATE; + imm->len = 1; +} + /* Segment a TSO packet into 'gso_size' segments and append * them to SQ for transfer */ @@ -1096,7 +1140,7 @@ static int nicvf_sq_append_tso(struct nicvf *nic, struct snd_queue *sq, int nicvf_sq_append_skb(struct nicvf *nic, struct sk_buff *skb) { int i, size; - int subdesc_cnt; + int subdesc_cnt, tso_sqe = 0; int sq_num, qentry; struct queue_set *qs; struct snd_queue *sq; @@ -1131,6 +1175,7 @@ int nicvf_sq_append_skb(struct nicvf *nic, struct sk_buff *skb) /* Add SQ header subdesc */ nicvf_sq_add_hdr_subdesc(nic, sq, qentry, subdesc_cnt - 1, skb, skb->len); + tso_sqe = qentry; /* Add SQ gather subdescs */ qentry = nicvf_get_nxt_sqentry(sq, qentry); @@ -1154,6 +1199,11 @@ int nicvf_sq_append_skb(struct nicvf *nic, struct sk_buff *skb) } doorbell: + if (nic->t88 && skb_shinfo(skb)->gso_size) { + qentry = nicvf_get_nxt_sqentry(sq, qentry); + nicvf_sq_add_cqe_subdesc(sq, qentry, tso_sqe, skb); + } + /* make sure all memory stores are done before ringing doorbell */ smp_wmb(); -- cgit v1.2.3-58-ga151 From b44e108b6f322eb5f20aa6eba39b468a1ffc10ff Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Wed, 31 Aug 2016 12:11:57 -0300 Subject: bnx2x: don't reset chip on cleanup if PCI function is offline When PCI error is detected, in some architectures (like PowerPC) a slot reset is performed - the driver's error handlers are in charge of "disable" device before the reset, and re-enable it after a successful slot reset. There are two cases though that another path is taken on the code: if the slot reset is not successful or if too many errors already happened in the specific adapter (meaning that possibly the device is experiencing a HW failure that slot reset is not able to solve), the core PCI error mechanism (called EEH in PowerPC) will remove the adapter from the system, since it will consider this as a permanent failure on device. In this case, a path is taken that leads to bnx2x_chip_cleanup() calling bnx2x_reset_hw(), which then tries to perform a HW reset on chip. This reset won't succeed since the HW is in a fault state, which can be seen by multiple messages on kernel log like below: bnx2x: [bnx2x_issue_dmae_with_comp:552(eth1)]DMAE timeout! bnx2x: [bnx2x_write_dmae:600(eth1)]DMAE returned failure -1 After some time, the PCI error mechanism gives up on waiting the driver's correct removal procedure and forcibly remove the adapter from the system. We can see soft lockup while core PCI error mechanism is waiting for driver to accomplish the right removal process. This patch adds a verification to avoid a chip reset whenever the function is in PCI error state - since this case is only reached when we have a device being removed because of a permanent failure, the HW chip reset is not expected to work fine neither is necessary. Also, as a minor improvement in error path, we avoid the MCP information dump in case of non-recoverable PCI error (when adapter is about to be removed), since it will certainly fail. Reported-by: Harsha Thyagaraja Signed-off-by: Guilherme G. Piccoli Acked-By: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 97e892511666..fa3386bb14f7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -772,6 +772,11 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) (bp->common.bc_ver & 0xff00) >> 8, (bp->common.bc_ver & 0xff)); + if (pci_channel_offline(bp->pdev)) { + BNX2X_ERR("Cannot dump MCP info while in PCI error\n"); + return; + } + val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER); if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER)) BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val); @@ -9415,10 +9420,16 @@ unload_error: /* Release IRQs */ bnx2x_free_irq(bp); - /* Reset the chip */ - rc = bnx2x_reset_hw(bp, reset_code); - if (rc) - BNX2X_ERR("HW_RESET failed\n"); + /* Reset the chip, unless PCI function is offline. If we reach this + * point following a PCI error handling, it means device is really + * in a bad state and we're about to remove it, so reset the chip + * is not a good idea. + */ + if (!pci_channel_offline(bp->pdev)) { + rc = bnx2x_reset_hw(bp, reset_code); + if (rc) + BNX2X_ERR("HW_RESET failed\n"); + } /* Report UNLOAD_DONE to MCP */ bnx2x_send_unload_done(bp, keep_link); -- cgit v1.2.3-58-ga151 From db7b542e4a789156a4fb61278f2074795fe2eb9c Mon Sep 17 00:00:00 2001 From: Miaoqing Pan Date: Thu, 4 Aug 2016 15:48:34 +0800 Subject: ath9k: fix AR5416 access GPIO warning The warning was seen on AR5416 chip, which invoke ath9k_hw_gio_get() before the GPIO initialized correctly. WARNING: CPU: 1 PID: 1159 at ~/drivers/net/wireless/ath/ath9k/hw.c:2776 ath9k_hw_gpio_get+0x148/0x1a0 [ath9k_hw] ... CPU: 1 PID: 1159 Comm: systemd-udevd Not tainted 4.7.0-rc7-aptosid-amd64 #1 aptosid 4.7~rc7-1~git92.slh.3 Hardware name: /DH67CL, BIOS BLH6710H.86A.0160.2012.1204.1156 12/04/2012 0000000000000286 00000000f912d633 ffffffff81290fd3 0000000000000000 0000000000000000 ffffffff81063fd4 ffff88040c6dc018 0000000000000000 0000000000000002 0000000000000000 0000000000000100 ffff88040c6dc018 Call Trace: [] ? dump_stack+0x5c/0x79 [] ? __warn+0xb4/0xd0 [] ? ath9k_hw_gpio_get+0x148/0x1a0 [ath9k_hw] Signed-off-by: Miaoqing Pan Reported-by: Stefan Lippers-Hollmann Tested-by: Stefan Lippers-Hollmann Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/hw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index d1d0c06d627c..14b13f07cd1f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2482,6 +2482,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) return -EINVAL; } + ath9k_gpio_cap_init(ah); + if (AR_SREV_9485(ah) || AR_SREV_9285(ah) || AR_SREV_9330(ah) || @@ -2531,8 +2533,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) else pCap->hw_caps &= ~ATH9K_HW_CAP_HT; - ath9k_gpio_cap_init(ah); - if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah)) pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX; else -- cgit v1.2.3-58-ga151 From 1358bd5a7477b346dfb6b502051d61f29b11a200 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 1 Sep 2016 15:15:06 -0500 Subject: net: smsc911x: Remove multiple exit points from smsc911x_open Rework the error handling in smsc911x open in preparation for the mdio startup being moved here. Signed-off-by: Jeremy Linton Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index ca3134540d2d..c9b0e055c62f 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1520,17 +1520,20 @@ static int smsc911x_open(struct net_device *dev) unsigned int timeout; unsigned int temp; unsigned int intcfg; + int retval; /* if the phy is not yet registered, retry later*/ if (!dev->phydev) { SMSC_WARN(pdata, hw, "phy_dev is NULL"); - return -EAGAIN; + retval = -EAGAIN; + goto out; } /* Reset the LAN911x */ - if (smsc911x_soft_reset(pdata)) { + retval = smsc911x_soft_reset(pdata); + if (retval) { SMSC_WARN(pdata, hw, "soft reset failed"); - return -EIO; + goto out; } smsc911x_reg_write(pdata, HW_CFG, 0x00050000); @@ -1600,7 +1603,8 @@ static int smsc911x_open(struct net_device *dev) if (!pdata->software_irq_signal) { netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", dev->irq); - return -ENODEV; + retval = -ENODEV; + goto out; } SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", dev->irq); @@ -1646,6 +1650,8 @@ static int smsc911x_open(struct net_device *dev) netif_start_queue(dev); return 0; +out: + return retval; } /* Entry point for stopping the interface */ -- cgit v1.2.3-58-ga151 From aea95dd52db436f406f3f45a455a710774a3a210 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 1 Sep 2016 15:15:07 -0500 Subject: net: smsc911x: Fix register_netdev, phy startup, driver unload ordering Move phy startup/shutdown into the smsc911x_open/stop routines. This allows the module to be unloaded because phy_connect_direct is no longer always holding the module use count. This one change also resolves a number of other problems. The link status of a downed interface no longer reflects a stale state. Errors caused by the net device being opened before the mdio/phy was configured. There is also a potential power savings as the phy's don't remain powered when the interface isn't running. Signed-off-by: Jeremy Linton Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 48 ++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index c9b0e055c62f..823ad3f3716d 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1099,15 +1099,8 @@ static int smsc911x_mii_init(struct platform_device *pdev, goto err_out_free_bus_2; } - if (smsc911x_mii_probe(dev) < 0) { - SMSC_WARN(pdata, probe, "Error registering mii bus"); - goto err_out_unregister_bus_3; - } - return 0; -err_out_unregister_bus_3: - mdiobus_unregister(pdata->mii_bus); err_out_free_bus_2: mdiobus_free(pdata->mii_bus); err_out_1: @@ -1522,18 +1515,20 @@ static int smsc911x_open(struct net_device *dev) unsigned int intcfg; int retval; - /* if the phy is not yet registered, retry later*/ + /* find and start the given phy */ if (!dev->phydev) { - SMSC_WARN(pdata, hw, "phy_dev is NULL"); - retval = -EAGAIN; - goto out; + retval = smsc911x_mii_probe(dev); + if (retval < 0) { + SMSC_WARN(pdata, probe, "Error starting phy"); + goto out; + } } /* Reset the LAN911x */ retval = smsc911x_soft_reset(pdata); if (retval) { SMSC_WARN(pdata, hw, "soft reset failed"); - goto out; + goto mii_free_out; } smsc911x_reg_write(pdata, HW_CFG, 0x00050000); @@ -1604,7 +1599,7 @@ static int smsc911x_open(struct net_device *dev) netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", dev->irq); retval = -ENODEV; - goto out; + goto mii_free_out; } SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", dev->irq); @@ -1650,6 +1645,10 @@ static int smsc911x_open(struct net_device *dev) netif_start_queue(dev); return 0; + +mii_free_out: + phy_disconnect(dev->phydev); + dev->phydev = NULL; out: return retval; } @@ -1674,8 +1673,12 @@ static int smsc911x_stop(struct net_device *dev) smsc911x_tx_update_txcounters(dev); /* Bring the PHY down */ - if (dev->phydev) + if (dev->phydev) { phy_stop(dev->phydev); + phy_disconnect(dev->phydev); + dev->phydev = NULL; + } + netif_carrier_off(dev); SMSC_TRACE(pdata, ifdown, "Interface stopped"); return 0; @@ -2297,11 +2300,10 @@ static int smsc911x_drv_remove(struct platform_device *pdev) pdata = netdev_priv(dev); BUG_ON(!pdata); BUG_ON(!pdata->ioaddr); - BUG_ON(!dev->phydev); + WARN_ON(dev->phydev); SMSC_TRACE(pdata, ifdown, "Stopping driver"); - phy_disconnect(dev->phydev); mdiobus_unregister(pdata->mii_bus); mdiobus_free(pdata->mii_bus); @@ -2500,6 +2502,12 @@ static int smsc911x_drv_probe(struct platform_device *pdev) netif_carrier_off(dev); + retval = smsc911x_mii_init(pdev, dev); + if (retval) { + SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); + goto out_free_irq; + } + retval = register_netdev(dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i registering device", retval); @@ -2509,12 +2517,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev) "Network interface: \"%s\"", dev->name); } - retval = smsc911x_mii_init(pdev, dev); - if (retval) { - SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); - goto out_unregister_netdev_5; - } - spin_lock_irq(&pdata->mac_lock); /* Check if mac address has been specified when bringing interface up */ @@ -2550,8 +2552,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev) return 0; -out_unregister_netdev_5: - unregister_netdev(dev); out_free_irq: free_irq(dev->irq, dev); out_disable_resources: -- cgit v1.2.3-58-ga151 From a85f00c36ef53ea3cb5ebf3dee4ce9cc6726671f Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 1 Sep 2016 15:15:08 -0500 Subject: net: smsc911x: Move interrupt handler before open In preparation for the allocating/enabling interrupts in the ndo_open routine move the irq handler before it. Signed-off-by: Jeremy Linton Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 122 +++++++++++++++++------------------ 1 file changed, 61 insertions(+), 61 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 823ad3f3716d..c2e56f06713a 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1507,6 +1507,67 @@ static void smsc911x_disable_irq_chip(struct net_device *dev) smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); } +static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct smsc911x_data *pdata = netdev_priv(dev); + u32 intsts = smsc911x_reg_read(pdata, INT_STS); + u32 inten = smsc911x_reg_read(pdata, INT_EN); + int serviced = IRQ_NONE; + u32 temp; + + if (unlikely(intsts & inten & INT_STS_SW_INT_)) { + temp = smsc911x_reg_read(pdata, INT_EN); + temp &= (~INT_EN_SW_INT_EN_); + smsc911x_reg_write(pdata, INT_EN, temp); + smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); + pdata->software_irq_signal = 1; + smp_wmb(); + serviced = IRQ_HANDLED; + } + + if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { + /* Called when there is a multicast update scheduled and + * it is now safe to complete the update */ + SMSC_TRACE(pdata, intr, "RX Stop interrupt"); + smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); + if (pdata->multicast_update_pending) + smsc911x_rx_multicast_update_workaround(pdata); + serviced = IRQ_HANDLED; + } + + if (intsts & inten & INT_STS_TDFA_) { + temp = smsc911x_reg_read(pdata, FIFO_INT); + temp |= FIFO_INT_TX_AVAIL_LEVEL_; + smsc911x_reg_write(pdata, FIFO_INT, temp); + smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); + netif_wake_queue(dev); + serviced = IRQ_HANDLED; + } + + if (unlikely(intsts & inten & INT_STS_RXE_)) { + SMSC_TRACE(pdata, intr, "RX Error interrupt"); + smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); + serviced = IRQ_HANDLED; + } + + if (likely(intsts & inten & INT_STS_RSFL_)) { + if (likely(napi_schedule_prep(&pdata->napi))) { + /* Disable Rx interrupts */ + temp = smsc911x_reg_read(pdata, INT_EN); + temp &= (~INT_EN_RSFL_EN_); + smsc911x_reg_write(pdata, INT_EN, temp); + /* Schedule a NAPI poll */ + __napi_schedule(&pdata->napi); + } else { + SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed"); + } + serviced = IRQ_HANDLED; + } + + return serviced; +} + static int smsc911x_open(struct net_device *dev) { struct smsc911x_data *pdata = netdev_priv(dev); @@ -1820,67 +1881,6 @@ static void smsc911x_set_multicast_list(struct net_device *dev) spin_unlock_irqrestore(&pdata->mac_lock, flags); } -static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct smsc911x_data *pdata = netdev_priv(dev); - u32 intsts = smsc911x_reg_read(pdata, INT_STS); - u32 inten = smsc911x_reg_read(pdata, INT_EN); - int serviced = IRQ_NONE; - u32 temp; - - if (unlikely(intsts & inten & INT_STS_SW_INT_)) { - temp = smsc911x_reg_read(pdata, INT_EN); - temp &= (~INT_EN_SW_INT_EN_); - smsc911x_reg_write(pdata, INT_EN, temp); - smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); - pdata->software_irq_signal = 1; - smp_wmb(); - serviced = IRQ_HANDLED; - } - - if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { - /* Called when there is a multicast update scheduled and - * it is now safe to complete the update */ - SMSC_TRACE(pdata, intr, "RX Stop interrupt"); - smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); - if (pdata->multicast_update_pending) - smsc911x_rx_multicast_update_workaround(pdata); - serviced = IRQ_HANDLED; - } - - if (intsts & inten & INT_STS_TDFA_) { - temp = smsc911x_reg_read(pdata, FIFO_INT); - temp |= FIFO_INT_TX_AVAIL_LEVEL_; - smsc911x_reg_write(pdata, FIFO_INT, temp); - smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); - netif_wake_queue(dev); - serviced = IRQ_HANDLED; - } - - if (unlikely(intsts & inten & INT_STS_RXE_)) { - SMSC_TRACE(pdata, intr, "RX Error interrupt"); - smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); - serviced = IRQ_HANDLED; - } - - if (likely(intsts & inten & INT_STS_RSFL_)) { - if (likely(napi_schedule_prep(&pdata->napi))) { - /* Disable Rx interrupts */ - temp = smsc911x_reg_read(pdata, INT_EN); - temp &= (~INT_EN_RSFL_EN_); - smsc911x_reg_write(pdata, INT_EN, temp); - /* Schedule a NAPI poll */ - __napi_schedule(&pdata->napi); - } else { - SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed"); - } - serviced = IRQ_HANDLED; - } - - return serviced; -} - #ifdef CONFIG_NET_POLL_CONTROLLER static void smsc911x_poll_controller(struct net_device *dev) { -- cgit v1.2.3-58-ga151 From f252974eaa64f64b940894f24bfa162a8e7f6b0d Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 1 Sep 2016 15:15:09 -0500 Subject: net: smsc911x: Move interrupt allocation to open/stop The /proc/irq/xx information is incorrect for smsc911x because the request_irq is happening before the register_netdev has the proper device name. Moving it to the open also fixes the case of when the device is renamed. Reported-by: Will Deacon Signed-off-by: Jeremy Linton Tested-by: Will Deacon Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 47 ++++++++++++++---------------------- 1 file changed, 18 insertions(+), 29 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index c2e56f06713a..4f8910b7db2e 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1575,6 +1575,7 @@ static int smsc911x_open(struct net_device *dev) unsigned int temp; unsigned int intcfg; int retval; + int irq_flags; /* find and start the given phy */ if (!dev->phydev) { @@ -1645,6 +1646,15 @@ static int smsc911x_open(struct net_device *dev) pdata->software_irq_signal = 0; smp_wmb(); + irq_flags = irq_get_trigger_type(dev->irq); + retval = request_irq(dev->irq, smsc911x_irqhandler, + irq_flags | IRQF_SHARED, dev->name, dev); + if (retval) { + SMSC_WARN(pdata, probe, + "Unable to claim requested irq: %d", dev->irq); + goto mii_free_out; + } + temp = smsc911x_reg_read(pdata, INT_EN); temp |= INT_EN_SW_INT_EN_; smsc911x_reg_write(pdata, INT_EN, temp); @@ -1660,7 +1670,7 @@ static int smsc911x_open(struct net_device *dev) netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", dev->irq); retval = -ENODEV; - goto mii_free_out; + goto irq_stop_out; } SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", dev->irq); @@ -1707,6 +1717,8 @@ static int smsc911x_open(struct net_device *dev) netif_start_queue(dev); return 0; +irq_stop_out: + free_irq(dev->irq, dev); mii_free_out: phy_disconnect(dev->phydev); dev->phydev = NULL; @@ -1733,6 +1745,8 @@ static int smsc911x_stop(struct net_device *dev) dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); smsc911x_tx_update_txcounters(dev); + free_irq(dev->irq, dev); + /* Bring the PHY down */ if (dev->phydev) { phy_stop(dev->phydev); @@ -2308,7 +2322,6 @@ static int smsc911x_drv_remove(struct platform_device *pdev) mdiobus_free(pdata->mii_bus); unregister_netdev(dev); - free_irq(dev->irq, dev); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smsc911x-memory"); if (!res) @@ -2393,8 +2406,7 @@ static int smsc911x_drv_probe(struct platform_device *pdev) struct smsc911x_data *pdata; struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev); struct resource *res; - unsigned int intcfg = 0; - int res_size, irq, irq_flags; + int res_size, irq; int retval; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -2433,7 +2445,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev) pdata = netdev_priv(dev); dev->irq = irq; - irq_flags = irq_get_trigger_type(irq); pdata->ioaddr = ioremap_nocache(res->start, res_size); pdata->dev = dev; @@ -2480,38 +2491,18 @@ static int smsc911x_drv_probe(struct platform_device *pdev) if (retval < 0) goto out_disable_resources; - /* configure irq polarity and type before connecting isr */ - if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) - intcfg |= INT_CFG_IRQ_POL_; - - if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) - intcfg |= INT_CFG_IRQ_TYPE_; - - smsc911x_reg_write(pdata, INT_CFG, intcfg); - - /* Ensure interrupts are globally disabled before connecting ISR */ - smsc911x_disable_irq_chip(dev); - - retval = request_irq(dev->irq, smsc911x_irqhandler, - irq_flags | IRQF_SHARED, dev->name, dev); - if (retval) { - SMSC_WARN(pdata, probe, - "Unable to claim requested irq: %d", dev->irq); - goto out_disable_resources; - } - netif_carrier_off(dev); retval = smsc911x_mii_init(pdev, dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); - goto out_free_irq; + goto out_disable_resources; } retval = register_netdev(dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i registering device", retval); - goto out_free_irq; + goto out_disable_resources; } else { SMSC_TRACE(pdata, probe, "Network interface: \"%s\"", dev->name); @@ -2552,8 +2543,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev) return 0; -out_free_irq: - free_irq(dev->irq, dev); out_disable_resources: pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); -- cgit v1.2.3-58-ga151 From 24b27fc4cdf9e10c5e79e5923b6b7c2c5c95096c Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Thu, 1 Sep 2016 22:18:34 -0700 Subject: bonding: Fix bonding crash Following few steps will crash kernel - (a) Create bonding master > modprobe bonding miimon=50 (b) Create macvlan bridge on eth2 > ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \ type macvlan (c) Now try adding eth2 into the bond > echo +eth2 > /sys/class/net/bond0/bonding/slaves Bonding does lots of things before checking if the device enslaved is busy or not. In this case when the notifier call-chain sends notifications, the bond_netdev_event() assumes that the rx_handler /rx_handler_data is registered while the bond_enslave() hasn't progressed far enough to register rx_handler for the new slave. This patch adds a rx_handler check that can be performed right at the beginning of the enslave code to avoid getting into this situation. Signed-off-by: Mahesh Bandewar Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 7 ++++--- include/linux/netdevice.h | 1 + net/core/dev.c | 16 ++++++++++++++++ 3 files changed, 21 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 217e8da0628c..9599ed6f1213 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1341,9 +1341,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) slave_dev->name); } - /* already enslaved */ - if (slave_dev->flags & IFF_SLAVE) { - netdev_dbg(bond_dev, "Error: Device was already enslaved\n"); + /* already in-use? */ + if (netdev_is_rx_handler_busy(slave_dev)) { + netdev_err(bond_dev, + "Error: Device is in use and cannot be enslaved\n"); return -EBUSY; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3a788bf0affd..e8d79d4ebcfe 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3267,6 +3267,7 @@ static inline void napi_free_frags(struct napi_struct *napi) napi->skb = NULL; } +bool netdev_is_rx_handler_busy(struct net_device *dev); int netdev_rx_handler_register(struct net_device *dev, rx_handler_func_t *rx_handler, void *rx_handler_data); diff --git a/net/core/dev.c b/net/core/dev.c index dd6ce598de89..ea6312057a71 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3974,6 +3974,22 @@ sch_handle_ingress(struct sk_buff *skb, struct packet_type **pt_prev, int *ret, return skb; } +/** + * netdev_is_rx_handler_busy - check if receive handler is registered + * @dev: device to check + * + * Check if a receive handler is already registered for a given device. + * Return true if there one. + * + * The caller must hold the rtnl_mutex. + */ +bool netdev_is_rx_handler_busy(struct net_device *dev) +{ + ASSERT_RTNL(); + return dev && rtnl_dereference(dev->rx_handler); +} +EXPORT_SYMBOL_GPL(netdev_is_rx_handler_busy); + /** * netdev_rx_handler_register - register receive handler * @dev: device to register a handler for -- cgit v1.2.3-58-ga151 From 9b4cdd516dadc1b68c55ba24520194a06adff10c Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Fri, 2 Sep 2016 13:37:11 +0200 Subject: vxlan: reject multicast destination without an interface Currently, kernel accepts configurations such as: ip l a type vxlan dstport 4789 id 1 group 239.192.0.1 ip l a type vxlan dstport 4789 id 1 group ff0e::110 However, neither of those really works. In the IPv4 case, the interface cannot be brought up ("RTNETLINK answers: No such device"). This is because multicast join will be rejected without the interface being specified. In the IPv6 case, multicast wil be joined on the first interface found. This is not what the user wants as it depends on random factors (order of interfaces). Note that it's possible to add a local address but it doesn't solve anything. For IPv4, it's not considered in the multicast join (thus the same error as above is returned on ifup). This could be added but it wouldn't help for IPv6 anyway. For IPv6, we do need the interface. Just reject a configuration that sets multicast address and does not provide an interface. Nobody can depend on the previous behavior as it never worked. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index c0dda6fc0921..6358e35d74b7 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2842,6 +2842,9 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, dev->mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM); needed_headroom = lowerdev->hard_header_len; + } else if (vxlan_addr_multicast(&dst->remote_ip)) { + pr_info("multicast destination requires interface to be specified\n"); + return -EINVAL; } if (conf->mtu) { -- cgit v1.2.3-58-ga151 From 3555621de7fcceb79c4850f3d07d1ae4f652acf6 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Fri, 2 Sep 2016 13:37:12 +0200 Subject: vxlan: fix duplicated and wrong error messages vxlan_dev_configure outputs error messages before returning, no need to print again the same mesages in vxlan_newlink. Also, vxlan_dev_configure may return a particular error code for a different reason than vxlan_newlink thinks. Move the remaining error messages into vxlan_dev_configure and let vxlan_newlink just pass on the error code. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 35 +++++++++-------------------------- 1 file changed, 9 insertions(+), 26 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 6358e35d74b7..6e65832051d6 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2782,14 +2782,15 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, struct net_device *lowerdev = NULL; if (conf->flags & VXLAN_F_GPE) { - if (conf->flags & ~VXLAN_F_ALLOWED_GPE) - return -EINVAL; /* For now, allow GPE only together with COLLECT_METADATA. * This can be relaxed later; in such case, the other side * of the PtP link will have to be provided. */ - if (!(conf->flags & VXLAN_F_COLLECT_METADATA)) + if ((conf->flags & ~VXLAN_F_ALLOWED_GPE) || + !(conf->flags & VXLAN_F_COLLECT_METADATA)) { + pr_info("unsupported combination of extensions\n"); return -EINVAL; + } vxlan_raw_setup(dev); } else { @@ -2877,8 +2878,10 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, tmp->cfg.saddr.sa.sa_family == AF_INET6) == use_ipv6 && tmp->cfg.dst_port == vxlan->cfg.dst_port && (tmp->flags & VXLAN_F_RCV_FLAGS) == - (vxlan->flags & VXLAN_F_RCV_FLAGS)) - return -EEXIST; + (vxlan->flags & VXLAN_F_RCV_FLAGS)) { + pr_info("duplicate VNI %u\n", be32_to_cpu(conf->vni)); + return -EEXIST; + } } dev->ethtool_ops = &vxlan_ethtool_ops; @@ -2912,7 +2915,6 @@ static int vxlan_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct vxlan_config conf; - int err; memset(&conf, 0, sizeof(conf)); @@ -3021,26 +3023,7 @@ static int vxlan_newlink(struct net *src_net, struct net_device *dev, if (tb[IFLA_MTU]) conf.mtu = nla_get_u32(tb[IFLA_MTU]); - err = vxlan_dev_configure(src_net, dev, &conf); - switch (err) { - case -ENODEV: - pr_info("ifindex %d does not exist\n", conf.remote_ifindex); - break; - - case -EPERM: - pr_info("IPv6 is disabled via sysctl\n"); - break; - - case -EEXIST: - pr_info("duplicate VNI %u\n", be32_to_cpu(conf.vni)); - break; - - case -EINVAL: - pr_info("unsupported combination of extensions\n"); - break; - } - - return err; + return vxlan_dev_configure(src_net, dev, &conf); } static void vxlan_dellink(struct net_device *dev, struct list_head *head) -- cgit v1.2.3-58-ga151 From 007e4ba3ee137f4700f39aa6dbaf01a71047c5f6 Mon Sep 17 00:00:00 2001 From: Helmut Buchsbaum Date: Sun, 4 Sep 2016 18:09:47 +0200 Subject: net: macb: initialize checksum when using checksum offloading I'm still struggling to get this fix right.. Changes since v2: - do not blindly modify SKB contents according to Dave's legitimate objection Changes since v1: - dropped disabling HW checksum offload for Zynq - initialize checksum similar to net/ethernet/freescale/fec_main.c -- >8 -- MACB/GEM needs the checksum field initialized to 0 to get correct results on transmit in all cases, e.g. on Zynq, UDP packets with payload <= 2 otherwise contain a wrong checksums. Signed-off-by: Helmut Buchsbaum Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 89c0cfa9719f..d954a97b0b0b 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1323,6 +1323,24 @@ dma_error: return 0; } +static inline int macb_clear_csum(struct sk_buff *skb) +{ + /* no change for packets without checksum offloading */ + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + /* make sure we can modify the header */ + if (unlikely(skb_cow_head(skb, 0))) + return -1; + + /* initialize checksum field + * This is required - at least for Zynq, which otherwise calculates + * wrong UDP header checksums for UDP packets with UDP data len <=2 + */ + *(__sum16 *)(skb_checksum_start(skb) + skb->csum_offset) = 0; + return 0; +} + static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) { u16 queue_index = skb_get_queue_mapping(skb); @@ -1362,6 +1380,11 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_BUSY; } + if (macb_clear_csum(skb)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + /* Map socket buffer for DMA transfer */ if (!macb_tx_map(bp, queue, skb)) { dev_kfree_skb_any(skb); -- cgit v1.2.3-58-ga151 From daa7ee8dfa64233789221685e73a6ef8159f80de Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Sun, 4 Sep 2016 23:02:21 +0530 Subject: net: smsc: remove build warning of duplicate definition The build of m32r was giving warning: In file included from drivers/net/ethernet/smsc/smc91x.c:92:0: drivers/net/ethernet/smsc/smc91x.h:448:0: warning: "SMC_inb" redefined #define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) drivers/net/ethernet/smsc/smc91x.h:106:0: note: this is the location of the previous definition #define SMC_inb(a, r) inb(((u32)a) + (r)) drivers/net/ethernet/smsc/smc91x.h:449:0: warning: "SMC_outb" redefined #define SMC_outb(x, ioaddr, reg) BUG() drivers/net/ethernet/smsc/smc91x.h:108:0: note: this is the location of the previous definition #define SMC_outb(v, a, r) outb(v, ((u32)a) + (r)) Signed-off-by: Sudip Mukherjee Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index e17671c9d1b0..ea8465467469 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -470,7 +470,9 @@ smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, #endif #if ! SMC_CAN_USE_8BIT +#undef SMC_inb #define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) +#undef SMC_outb #define SMC_outb(x, ioaddr, reg) BUG() #define SMC_insb(a, r, p, l) BUG() #define SMC_outsb(a, r, p, l) BUG() -- cgit v1.2.3-58-ga151 From 9d13744bb75078175ab49408f2abb980e4dbccc9 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 5 Sep 2016 01:57:35 -0400 Subject: bnxt_en: Fix TX push operation on ARM64. There is a code path where we are calling __iowrite64_copy() on an address that is not 64-bit aligned. This causes an exception on some architectures such as arm64. Fix that code path by using __iowrite32_copy(). Reported-by: JD Zheng Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 2cf79100c9cb..228c964e709a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -353,8 +353,8 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev) push_len = (length + sizeof(*tx_push) + 7) / 8; if (push_len > 16) { __iowrite64_copy(txr->tx_doorbell, tx_push_buf, 16); - __iowrite64_copy(txr->tx_doorbell + 4, tx_push_buf + 1, - push_len - 16); + __iowrite32_copy(txr->tx_doorbell + 4, tx_push_buf + 1, + (push_len - 16) << 1); } else { __iowrite64_copy(txr->tx_doorbell, tx_push_buf, push_len); -- cgit v1.2.3-58-ga151 From e34f2ff40e0339f6a379e1ecf49e8f2759056453 Mon Sep 17 00:00:00 2001 From: Giedrius Statkevičius Date: Thu, 1 Sep 2016 20:47:02 +0300 Subject: ath9k: bring back direction setting in ath9k_{start_stop} MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup led_pin initial") that broken the WLAN status led on my laptop with AR9287 after suspending and resuming. Steps to reproduce: * Suspend (laptop) * Resume (laptop) * Observe that the WLAN led no longer turns ON/OFF depending on the status and is always red Even though for my case it only needs to be set to OUT in ath9k_start but for consistency bring back the IN direction setting as well. Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial") Cc: Miaoqing Pan Cc: Kalle Valo Cc: # 4.7+ Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711 Signed-off-by: Giedrius Statkevičius [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6ca4337a98c4..7cb65c303f8d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -718,9 +718,12 @@ static int ath9k_start(struct ieee80211_hw *hw) if (!ath_complete_reset(sc, false)) ah->reset_power_on = false; - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 1 : 0); + ath9k_hw_gpio_request_out(ah, ah->led_pin, NULL, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + } /* * Reset key cache to sane defaults (all entries cleared) instead of @@ -864,9 +867,11 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_lock_bh(&sc->sc_pcu_lock); - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 0 : 1); + ath9k_hw_gpio_request_in(ah, ah->led_pin, NULL); + } ath_prepare_reset(sc); -- cgit v1.2.3-58-ga151 From ded89912156b1a47d940a0c954c43afbabd0c42c Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Mon, 5 Sep 2016 10:45:47 +0100 Subject: brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap() User-space can choose to omit NL80211_ATTR_SSID and only provide raw IE TLV data. When doing so it can provide SSID IE with length exceeding the allowed size. The driver further processes this IE copying it into a local variable without checking the length. Hence stack can be corrupted and used as exploit. Cc: stable@vger.kernel.org # v4.7 Reported-by: Daxing Guo Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 5db56a74e7df..b8aec5e5ef93 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -4527,7 +4527,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, (u8 *)&settings->beacon.head[ie_offset], settings->beacon.head_len - ie_offset, WLAN_EID_SSID); - if (!ssid_ie) + if (!ssid_ie || ssid_ie->len > IEEE80211_MAX_SSID_LEN) return -EINVAL; memcpy(ssid_le.SSID, ssid_ie->data, ssid_ie->len); -- cgit v1.2.3-58-ga151 From 0dbf657c3993a269fa0cd7dabbb9c02741d4aefa Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Wed, 7 Sep 2016 19:07:57 +0300 Subject: net/mlx5e: Fix xmit_more counter race issue Update the xmit_more counter before notifying the HW, to prevent a possible use-after-free of the skb. Fixes: c8cf78fe100b ("net/mlx5e: Add ethtool counter for TX xmit_more") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 988eca99ee0f..eb0e72537f10 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -356,6 +356,7 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) sq->stats.stopped++; } + sq->stats.xmit_more += skb->xmit_more; if (!skb->xmit_more || netif_xmit_stopped(sq->txq)) { int bf_sz = 0; @@ -375,7 +376,6 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) sq->stats.packets++; sq->stats.bytes += num_bytes; - sq->stats.xmit_more += skb->xmit_more; return NETDEV_TX_OK; dma_unmap_wqe_err: -- cgit v1.2.3-58-ga151 From 7abc2110779b133e54ce681a4d0be3d89304eda1 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 7 Sep 2016 19:07:59 +0300 Subject: net/mlx5e: Prevent casting overflow On 64 bits architectures unsigned long is longer than u32, casting to unsigned long will result in overflow. We need to first allocate an unsigned long variable, then assign the wanted value. Fixes: 665bc53969d7 ('net/mlx5e: Use new ethtool get/set link ksettings API') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index d0cf8fa22659..98e1a4a44268 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -659,9 +659,10 @@ out: static void ptys2ethtool_supported_link(unsigned long *supported_modes, u32 eth_proto_cap) { + unsigned long proto_cap = eth_proto_cap; int proto; - for_each_set_bit(proto, (unsigned long *)ð_proto_cap, MLX5E_LINK_MODES_NUMBER) + for_each_set_bit(proto, &proto_cap, MLX5E_LINK_MODES_NUMBER) bitmap_or(supported_modes, supported_modes, ptys2ethtool_table[proto].supported, __ETHTOOL_LINK_MODE_MASK_NBITS); @@ -670,9 +671,10 @@ static void ptys2ethtool_supported_link(unsigned long *supported_modes, static void ptys2ethtool_adver_link(unsigned long *advertising_modes, u32 eth_proto_cap) { + unsigned long proto_cap = eth_proto_cap; int proto; - for_each_set_bit(proto, (unsigned long *)ð_proto_cap, MLX5E_LINK_MODES_NUMBER) + for_each_set_bit(proto, &proto_cap, MLX5E_LINK_MODES_NUMBER) bitmap_or(advertising_modes, advertising_modes, ptys2ethtool_table[proto].advertised, __ETHTOOL_LINK_MODE_MASK_NBITS); -- cgit v1.2.3-58-ga151 From 4e39883d9c7426f8246ef86a32dc6a6f06f5aace Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 7 Sep 2016 19:08:00 +0300 Subject: net/mlx5e: Fix global PFC counters replication Currently when reading global PFC statistics we left the counter iterator out of the equation and we ended up reading the same counter over and over again. Instead of reading the counter at index 0 on every iteration we now read the counter at index (i). Fixes: e989d5a532ce ('net/mlx5e: Expose flow control counters to ethtool') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 98e1a4a44268..7a346bb2ed00 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -331,7 +331,7 @@ static void mlx5e_get_ethtool_stats(struct net_device *dev, if (mlx5e_query_global_pause_combined(priv)) { for (i = 0; i < NUM_PPORT_PER_PRIO_PFC_COUNTERS; i++) { data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.per_prio_counters[0], - pport_per_prio_pfc_stats_desc, 0); + pport_per_prio_pfc_stats_desc, i); } } -- cgit v1.2.3-58-ga151 From cd17d230dd060a12f7451c0caeedb3fd5158eaf9 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 7 Sep 2016 19:08:01 +0300 Subject: net/mlx5e: Fix parsing of vlan packets when updating lro header Currently vlan tagged packets were not parsed correctly and assumed to be regular IPv4/IPv6 packets. We should check for 802.1Q/802.1ad tags and update the lro header accordingly. This fixes the use case where LRO is on and rxvlan is off (vlan stripping is off). Fixes: e586b3b0baee ('net/mlx5: Ethernet Datapath files') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index b6f8ebbdb487..e7c969df3dad 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -637,24 +637,32 @@ bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq) static void mlx5e_lro_update_hdr(struct sk_buff *skb, struct mlx5_cqe64 *cqe, u32 cqe_bcnt) { - struct ethhdr *eth = (struct ethhdr *)(skb->data); - struct iphdr *ipv4 = (struct iphdr *)(skb->data + ETH_HLEN); - struct ipv6hdr *ipv6 = (struct ipv6hdr *)(skb->data + ETH_HLEN); + struct ethhdr *eth = (struct ethhdr *)(skb->data); + struct iphdr *ipv4; + struct ipv6hdr *ipv6; struct tcphdr *tcp; + int network_depth = 0; + __be16 proto; + u16 tot_len; u8 l4_hdr_type = get_cqe_l4_hdr_type(cqe); int tcp_ack = ((CQE_L4_HDR_TYPE_TCP_ACK_NO_DATA == l4_hdr_type) || (CQE_L4_HDR_TYPE_TCP_ACK_AND_DATA == l4_hdr_type)); - u16 tot_len = cqe_bcnt - ETH_HLEN; + skb->mac_len = ETH_HLEN; + proto = __vlan_get_protocol(skb, eth->h_proto, &network_depth); - if (eth->h_proto == htons(ETH_P_IP)) { - tcp = (struct tcphdr *)(skb->data + ETH_HLEN + + ipv4 = (struct iphdr *)(skb->data + network_depth); + ipv6 = (struct ipv6hdr *)(skb->data + network_depth); + tot_len = cqe_bcnt - network_depth; + + if (proto == htons(ETH_P_IP)) { + tcp = (struct tcphdr *)(skb->data + network_depth + sizeof(struct iphdr)); ipv6 = NULL; skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; } else { - tcp = (struct tcphdr *)(skb->data + ETH_HLEN + + tcp = (struct tcphdr *)(skb->data + network_depth + sizeof(struct ipv6hdr)); ipv4 = NULL; skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; -- cgit v1.2.3-58-ga151 From 312fada1f9f87fb55ace4b5a55a70a9eea5100fd Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 7 Sep 2016 19:45:35 +0100 Subject: nfp: remove linux/version.h includes Remove unnecessary version.h includes. Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Reviewed-by: Dinan Gunawardena Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 1 - drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 1 - drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c | 1 - 3 files changed, 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 88678c172b19..e4fe0f080f34 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -41,7 +41,6 @@ * Chris Telfer */ -#include #include #include #include diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c index 7d7933d00b8f..4c9897220969 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c @@ -40,7 +40,6 @@ * Brad Petrus */ -#include #include #include #include diff --git a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c index 37abef016a0a..6f22b0e12ac7 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c @@ -38,7 +38,6 @@ * Rolf Neugebauer */ -#include #include #include #include -- cgit v1.2.3-58-ga151 From 313b345cbff566340022c82267a377e1e493ef90 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 7 Sep 2016 19:45:36 +0100 Subject: nfp: drop support for old firmware ABIs Be more strict about FW versions. Drop support for old transitional revisions which were never used in production. Dropping support for FW ABI version 0.0.0.0 is particularly useful because 0 could just be uninitialized memory. Signed-off-by: Jakub Kicinski Reviewed-by: Dinan Gunawardena Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c index 6f22b0e12ac7..f7062cb648e1 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c @@ -133,7 +133,7 @@ static int nfp_netvf_pci_probe(struct pci_dev *pdev, } nfp_net_get_fw_version(&fw_ver, ctrl_bar); - if (fw_ver.class != NFP_NET_CFG_VERSION_CLASS_GENERIC) { + if (fw_ver.resv || fw_ver.class != NFP_NET_CFG_VERSION_CLASS_GENERIC) { dev_err(&pdev->dev, "Unknown Firmware ABI %d.%d.%d.%d\n", fw_ver.resv, fw_ver.class, fw_ver.major, fw_ver.minor); err = -EINVAL; @@ -141,9 +141,7 @@ static int nfp_netvf_pci_probe(struct pci_dev *pdev, } /* Determine stride */ - if (nfp_net_fw_ver_eq(&fw_ver, 0, 0, 0, 0) || - nfp_net_fw_ver_eq(&fw_ver, 0, 0, 0, 1) || - nfp_net_fw_ver_eq(&fw_ver, 0, 0, 0x12, 0x48)) { + if (nfp_net_fw_ver_eq(&fw_ver, 0, 0, 0, 1)) { stride = 2; tx_bar_no = NFP_NET_Q0_BAR; rx_bar_no = NFP_NET_Q1_BAR; -- cgit v1.2.3-58-ga151 From ebecefc820ec791a216382a68b937577bb69d3f7 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 7 Sep 2016 19:45:37 +0100 Subject: nfp: don't pad frames on receive There is no need to pad frames to ETH_ZLEN on RX. Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Reviewed-by: Dinan Gunawardena Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index e4fe0f080f34..252e4924de0f 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -1440,10 +1440,6 @@ static int nfp_net_rx(struct nfp_net_rx_ring *rx_ring, int budget) nfp_net_set_hash(nn->netdev, skb, rxd); - /* Pad small frames to minimum */ - if (skb_put_padto(skb, 60)) - break; - /* Stats update */ u64_stats_update_begin(&r_vec->rx_sync); r_vec->rx_pkts++; -- cgit v1.2.3-58-ga151 From 40d259045500c6431633f215516c1f94bac8c62f Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 8 Sep 2016 08:16:01 +0200 Subject: mlxsw: spectrum_router: Fix error path in mlxsw_sp_router_init When neigh_init fails, we have to do proper cleanup including router_fini call. Fixes: 6cf3c971dc84cb ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Jiri Pirko Acked-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 352259b3c38a..3f5c51da6d3e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1517,7 +1517,14 @@ int mlxsw_sp_router_init(struct mlxsw_sp *mlxsw_sp) return err; mlxsw_sp_lpm_init(mlxsw_sp); mlxsw_sp_vrs_init(mlxsw_sp); - return mlxsw_sp_neigh_init(mlxsw_sp); + err = mlxsw_sp_neigh_init(mlxsw_sp); + if (err) + goto err_neigh_init; + return 0; + +err_neigh_init: + __mlxsw_sp_router_fini(mlxsw_sp); + return err; } void mlxsw_sp_router_fini(struct mlxsw_sp *mlxsw_sp) -- cgit v1.2.3-58-ga151 From 3247ff2b318f3eeaaf32163ce39ddaac23e9a6f9 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 8 Sep 2016 08:16:02 +0200 Subject: mlxsw: spectrum: Set port type before setting its address During port init, we currently set the port's type to Ethernet after setting its MAC address. However, the hardware documentation states this should be the other way around. Align the driver with the hardware documentation and set the port's MAC address after setting its type. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index e16b34718c8c..d48873bcbddf 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2106,6 +2106,13 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, dev->netdev_ops = &mlxsw_sp_port_netdev_ops; dev->ethtool_ops = &mlxsw_sp_port_ethtool_ops; + err = mlxsw_sp_port_swid_set(mlxsw_sp_port, 0); + if (err) { + dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set SWID\n", + mlxsw_sp_port->local_port); + goto err_port_swid_set; + } + err = mlxsw_sp_port_dev_addr_init(mlxsw_sp_port); if (err) { dev_err(mlxsw_sp->bus_info->dev, "Port %d: Unable to init port mac address\n", @@ -2131,13 +2138,6 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, goto err_port_system_port_mapping_set; } - err = mlxsw_sp_port_swid_set(mlxsw_sp_port, 0); - if (err) { - dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set SWID\n", - mlxsw_sp_port->local_port); - goto err_port_swid_set; - } - err = mlxsw_sp_port_speed_by_width_set(mlxsw_sp_port, width); if (err) { dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to enable speeds\n", @@ -2219,10 +2219,10 @@ err_port_buffers_init: err_port_admin_status_set: err_port_mtu_set: err_port_speed_by_width_set: - mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT); -err_port_swid_set: err_port_system_port_mapping_set: err_dev_addr_init: + mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT); +err_port_swid_set: free_percpu(mlxsw_sp_port->pcpu_stats); err_alloc_stats: kfree(mlxsw_sp_port->untagged_vlans); -- cgit v1.2.3-58-ga151 From 47b02f7294a483387772a46931da942b2ca9d845 Mon Sep 17 00:00:00 2001 From: Lars Persson Date: Thu, 8 Sep 2016 13:24:21 +0200 Subject: dwc_eth_qos: do not register semi-initialized device We move register_netdev() to the end of dwceqos_probe() to close any races where the netdev callbacks are called before the initialization has finished. Reported-by: Pavel Andrianov Signed-off-by: Lars Persson Signed-off-by: David S. Miller --- drivers/net/ethernet/synopsys/dwc_eth_qos.c | 38 ++++++++++++++--------------- 1 file changed, 18 insertions(+), 20 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/synopsys/dwc_eth_qos.c b/drivers/net/ethernet/synopsys/dwc_eth_qos.c index 5a3941bf250f..4490ebaed127 100644 --- a/drivers/net/ethernet/synopsys/dwc_eth_qos.c +++ b/drivers/net/ethernet/synopsys/dwc_eth_qos.c @@ -1246,7 +1246,7 @@ static int dwceqos_mii_init(struct net_local *lp) lp->mii_bus->read = &dwceqos_mdio_read; lp->mii_bus->write = &dwceqos_mdio_write; lp->mii_bus->priv = lp; - lp->mii_bus->parent = &lp->ndev->dev; + lp->mii_bus->parent = &lp->pdev->dev; of_address_to_resource(lp->pdev->dev.of_node, 0, &res); snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%.8llx", @@ -2853,25 +2853,17 @@ static int dwceqos_probe(struct platform_device *pdev) ndev->features = ndev->hw_features; - netif_napi_add(ndev, &lp->napi, dwceqos_rx_poll, NAPI_POLL_WEIGHT); - - ret = register_netdev(ndev); - if (ret) { - dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); - goto err_out_clk_dis_aper; - } - lp->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref_clk"); if (IS_ERR(lp->phy_ref_clk)) { dev_err(&pdev->dev, "phy_ref_clk clock not found.\n"); ret = PTR_ERR(lp->phy_ref_clk); - goto err_out_unregister_netdev; + goto err_out_clk_dis_aper; } ret = clk_prepare_enable(lp->phy_ref_clk); if (ret) { dev_err(&pdev->dev, "Unable to enable device clock.\n"); - goto err_out_unregister_netdev; + goto err_out_clk_dis_aper; } lp->phy_node = of_parse_phandle(lp->pdev->dev.of_node, @@ -2880,7 +2872,7 @@ static int dwceqos_probe(struct platform_device *pdev) ret = of_phy_register_fixed_link(lp->pdev->dev.of_node); if (ret < 0) { dev_err(&pdev->dev, "invalid fixed-link"); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } lp->phy_node = of_node_get(lp->pdev->dev.of_node); @@ -2889,7 +2881,7 @@ static int dwceqos_probe(struct platform_device *pdev) ret = of_get_phy_mode(lp->pdev->dev.of_node); if (ret < 0) { dev_err(&lp->pdev->dev, "error in getting phy i/f\n"); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } lp->phy_interface = ret; @@ -2897,14 +2889,14 @@ static int dwceqos_probe(struct platform_device *pdev) ret = dwceqos_mii_init(lp); if (ret) { dev_err(&lp->pdev->dev, "error in dwceqos_mii_init\n"); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } ret = dwceqos_mii_probe(ndev); if (ret != 0) { netdev_err(ndev, "mii_probe fail.\n"); ret = -ENXIO; - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } dwceqos_set_umac_addr(lp, lp->ndev->dev_addr, 0); @@ -2922,7 +2914,7 @@ static int dwceqos_probe(struct platform_device *pdev) if (ret) { dev_err(&lp->pdev->dev, "Unable to retrieve DT, error %d\n", ret); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } dev_info(&lp->pdev->dev, "pdev->id %d, baseaddr 0x%08lx, irq %d\n", pdev->id, ndev->base_addr, ndev->irq); @@ -2932,18 +2924,24 @@ static int dwceqos_probe(struct platform_device *pdev) if (ret) { dev_err(&lp->pdev->dev, "Unable to request IRQ %d, error %d\n", ndev->irq, ret); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } if (netif_msg_probe(lp)) netdev_dbg(ndev, "net_local@%p\n", lp); + netif_napi_add(ndev, &lp->napi, dwceqos_rx_poll, NAPI_POLL_WEIGHT); + + ret = register_netdev(ndev); + if (ret) { + dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); + goto err_out_clk_dis_phy; + } + return 0; -err_out_unregister_clk_notifier: +err_out_clk_dis_phy: clk_disable_unprepare(lp->phy_ref_clk); -err_out_unregister_netdev: - unregister_netdev(ndev); err_out_clk_dis_aper: clk_disable_unprepare(lp->apb_pclk); err_out_free_netdev: -- cgit v1.2.3-58-ga151 From c2f57fb97da5730509a50e316f353d3da17f6c25 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 8 Sep 2016 16:25:15 +0200 Subject: drivers: net: phy: mdio-xgene: Add hardware dependency The mdio-xgene driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare Cc: Iyappan Subramanian Cc: David S. Miller Acked-by: Iyappan Subramanian Signed-off-by: David S. Miller --- drivers/net/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 47a64342cc16..b4863e4e522b 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -303,6 +303,7 @@ config MDIO_HISI_FEMAC config MDIO_XGENE tristate "APM X-Gene SoC MDIO bus controller" + depends on ARCH_XGENE || COMPILE_TEST help This module provides a driver for the MDIO busses found in the APM X-Gene SoC's. -- cgit v1.2.3-58-ga151 From e1487888eccc83e9eb5a3659955f79b039dc7945 Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Wed, 7 Sep 2016 14:57:09 -0400 Subject: net: ethernet: renesas: sh_eth: add POST registers for rz Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers were not documented and left out of the driver for RZ/A making the CAM feature non-operational. Additionally, when the offset values for POST1-4 are left blank, the driver attempts to set them using an offset of 0xFFFF which can cause a memory corruption or panic. This patch fixes the panic and properly enables CAM. Reported-by: Daniel Palmer Signed-off-by: Chris Brandt Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 799d58d86e6d..054e795df90f 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -201,9 +201,14 @@ static const u16 sh_eth_offset_fast_rz[SH_ETH_MAX_REGISTER_OFFSET] = { [ARSTR] = 0x0000, [TSU_CTRST] = 0x0004, + [TSU_FWSLC] = 0x0038, [TSU_VTAG0] = 0x0058, [TSU_ADSBSY] = 0x0060, [TSU_TEN] = 0x0064, + [TSU_POST1] = 0x0070, + [TSU_POST2] = 0x0074, + [TSU_POST3] = 0x0078, + [TSU_POST4] = 0x007c, [TSU_ADRH0] = 0x0100, [TXNLCR0] = 0x0080, @@ -2786,6 +2791,8 @@ static void sh_eth_tsu_init(struct sh_eth_private *mdp) { if (sh_eth_is_rz_fast_ether(mdp)) { sh_eth_tsu_write(mdp, 0, TSU_TEN); /* Disable all CAM entry */ + sh_eth_tsu_write(mdp, TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, + TSU_FWSLC); /* Enable POST registers */ return; } -- cgit v1.2.3-58-ga151 From 74a9e9054456658f047bf71d9108844defde793d Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Sun, 11 Sep 2016 10:56:17 +0300 Subject: net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all() mlx4_en_dcbnl_set_all() returns u8, so return value can't be negative in case of failure. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib Signed-off-by: Rana Shahout Reported-by: Dan Carpenter Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 99c6bbdff501..97081e5bafd1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -158,10 +158,9 @@ static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) struct mlx4_en_priv *priv = netdev_priv(netdev); struct mlx4_en_dev *mdev = priv->mdev; struct mlx4_en_cee_config *dcb_cfg = &priv->cee_params.dcb_cfg; - int err = 0; if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) - return -EINVAL; + return 1; if (dcb_cfg->pfc_state) { int tc; @@ -199,15 +198,17 @@ static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) en_dbg(DRV, priv, "Set pfc off\n"); } - err = mlx4_SET_PORT_general(mdev->dev, priv->port, - priv->rx_skb_size + ETH_FCS_LEN, - priv->prof->tx_pause, - priv->prof->tx_ppp, - priv->prof->rx_pause, - priv->prof->rx_ppp); - if (err) + if (mlx4_SET_PORT_general(mdev->dev, priv->port, + priv->rx_skb_size + ETH_FCS_LEN, + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp)) { en_err(priv, "Failed setting pause params\n"); - return err; + return 1; + } + + return 0; } static u8 mlx4_en_dcbnl_get_state(struct net_device *dev) -- cgit v1.2.3-58-ga151 From c677071741343381f4f555867c04af7ec4a90869 Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Sun, 11 Sep 2016 10:56:18 +0300 Subject: net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state() mlx4_en_dcbnl_set_state() returns u8, the return value from mlx4_en_setup_tc() could be negative in case of failure, so fix that. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 97081e5bafd1..316a70714434 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -239,7 +239,10 @@ static u8 mlx4_en_dcbnl_set_state(struct net_device *dev, u8 state) priv->flags &= ~MLX4_EN_FLAG_DCB_ENABLED; } - return mlx4_en_setup_tc(dev, num_tcs); + if (mlx4_en_setup_tc(dev, num_tcs)) + return 1; + + return 0; } /* On success returns a non-zero 802.1p user priority bitmap -- cgit v1.2.3-58-ga151 From 564ed9b187082da79726a2f25bb88a58ebeec7e8 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 11 Sep 2016 10:56:19 +0300 Subject: net/mlx4_en: Fixes for DCBX This patch adds a capability check before enabling DCBX. In addition, it re-organizes the relevant data structures, and fixes a typo in a define. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 31 +++++++++++++------------- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 21 +++++++---------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 15 +++---------- drivers/net/ethernet/mellanox/mlx4/port.c | 4 ++-- 4 files changed, 28 insertions(+), 43 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 316a70714434..b04760a5034b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -94,7 +94,7 @@ static u8 mlx4_en_dcbnl_getcap(struct net_device *dev, int capid, u8 *cap) *cap = true; break; case DCB_CAP_ATTR_DCBX: - *cap = priv->cee_params.dcbx_cap; + *cap = priv->dcbx_cap; break; case DCB_CAP_ATTR_PFC_TCS: *cap = 1 << mlx4_max_tc(priv->mdev->dev); @@ -111,14 +111,14 @@ static u8 mlx4_en_dcbnl_getpfcstate(struct net_device *netdev) { struct mlx4_en_priv *priv = netdev_priv(netdev); - return priv->cee_params.dcb_cfg.pfc_state; + return priv->cee_config.pfc_state; } static void mlx4_en_dcbnl_setpfcstate(struct net_device *netdev, u8 state) { struct mlx4_en_priv *priv = netdev_priv(netdev); - priv->cee_params.dcb_cfg.pfc_state = state; + priv->cee_config.pfc_state = state; } static void mlx4_en_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, @@ -126,7 +126,7 @@ static void mlx4_en_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, { struct mlx4_en_priv *priv = netdev_priv(netdev); - *setting = priv->cee_params.dcb_cfg.tc_config[priority].dcb_pfc; + *setting = priv->cee_config.dcb_pfc[priority]; } static void mlx4_en_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority, @@ -134,8 +134,8 @@ static void mlx4_en_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority, { struct mlx4_en_priv *priv = netdev_priv(netdev); - priv->cee_params.dcb_cfg.tc_config[priority].dcb_pfc = setting; - priv->cee_params.dcb_cfg.pfc_state = true; + priv->cee_config.dcb_pfc[priority] = setting; + priv->cee_config.pfc_state = true; } static int mlx4_en_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) @@ -157,12 +157,11 @@ static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) { struct mlx4_en_priv *priv = netdev_priv(netdev); struct mlx4_en_dev *mdev = priv->mdev; - struct mlx4_en_cee_config *dcb_cfg = &priv->cee_params.dcb_cfg; - if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return 1; - if (dcb_cfg->pfc_state) { + if (priv->cee_config.pfc_state) { int tc; priv->prof->rx_pause = 0; @@ -170,7 +169,7 @@ static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) for (tc = 0; tc < CEE_DCBX_MAX_PRIO; tc++) { u8 tc_mask = 1 << tc; - switch (dcb_cfg->tc_config[tc].dcb_pfc) { + switch (priv->cee_config.dcb_pfc[tc]) { case pfc_disabled: priv->prof->tx_ppp &= ~tc_mask; priv->prof->rx_ppp &= ~tc_mask; @@ -226,7 +225,7 @@ static u8 mlx4_en_dcbnl_set_state(struct net_device *dev, u8 state) struct mlx4_en_priv *priv = netdev_priv(dev); int num_tcs = 0; - if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return 1; if (!!(state) == !!(priv->flags & MLX4_EN_FLAG_DCB_ENABLED)) @@ -256,7 +255,7 @@ static int mlx4_en_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id) .selector = idtype, .protocol = id, }; - if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return 0; return dcb_getapp(netdev, &app); @@ -268,7 +267,7 @@ static int mlx4_en_dcbnl_setapp(struct net_device *netdev, u8 idtype, struct mlx4_en_priv *priv = netdev_priv(netdev); struct dcb_app app; - if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return -EINVAL; memset(&app, 0, sizeof(struct dcb_app)); @@ -437,7 +436,7 @@ static u8 mlx4_en_dcbnl_getdcbx(struct net_device *dev) { struct mlx4_en_priv *priv = netdev_priv(dev); - return priv->cee_params.dcbx_cap; + return priv->dcbx_cap; } static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode) @@ -446,7 +445,7 @@ static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode) struct ieee_ets ets = {0}; struct ieee_pfc pfc = {0}; - if (mode == priv->cee_params.dcbx_cap) + if (mode == priv->dcbx_cap) return 0; if ((mode & DCB_CAP_DCBX_LLD_MANAGED) || @@ -455,7 +454,7 @@ static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode) !(mode & DCB_CAP_DCBX_HOST)) goto err; - priv->cee_params.dcbx_cap = mode; + priv->dcbx_cap = mode; ets.ets_cap = IEEE_8021QAZ_MAX_TCS; pfc.pfc_cap = IEEE_8021QAZ_MAX_TCS; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 4198e9bf89d0..fedb829276f4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -71,10 +71,11 @@ int mlx4_en_setup_tc(struct net_device *dev, u8 up) #ifdef CONFIG_MLX4_EN_DCB if (!mlx4_is_slave(priv->mdev->dev)) { if (up) { - priv->flags |= MLX4_EN_FLAG_DCB_ENABLED; + if (priv->dcbx_cap) + priv->flags |= MLX4_EN_FLAG_DCB_ENABLED; } else { priv->flags &= ~MLX4_EN_FLAG_DCB_ENABLED; - priv->cee_params.dcb_cfg.pfc_state = false; + priv->cee_config.pfc_state = false; } } #endif /* CONFIG_MLX4_EN_DCB */ @@ -3048,9 +3049,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, struct mlx4_en_priv *priv; int i; int err; -#ifdef CONFIG_MLX4_EN_DCB - struct tc_configuration *tc; -#endif dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv), MAX_TX_RINGS, MAX_RX_RINGS); @@ -3117,16 +3115,13 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, priv->msg_enable = MLX4_EN_MSG_LEVEL; #ifdef CONFIG_MLX4_EN_DCB if (!mlx4_is_slave(priv->mdev->dev)) { - priv->cee_params.dcbx_cap = DCB_CAP_DCBX_VER_CEE | - DCB_CAP_DCBX_HOST | - DCB_CAP_DCBX_VER_IEEE; + priv->dcbx_cap = DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_HOST | + DCB_CAP_DCBX_VER_IEEE; priv->flags |= MLX4_EN_DCB_ENABLED; - priv->cee_params.dcb_cfg.pfc_state = false; + priv->cee_config.pfc_state = false; - for (i = 0; i < MLX4_EN_NUM_UP; i++) { - tc = &priv->cee_params.dcb_cfg.tc_config[i]; - tc->dcb_pfc = pfc_disabled; - } + for (i = 0; i < MLX4_EN_NUM_UP; i++) + priv->cee_config.dcb_pfc[i] = pfc_disabled; if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ETS_CFG) { dev->dcbnl_ops = &mlx4_en_dcbnl_ops; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 2c2913dcae98..9099dbd04951 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -482,20 +482,10 @@ enum dcb_pfc_type { pfc_enabled_rx }; -struct tc_configuration { - enum dcb_pfc_type dcb_pfc; -}; - struct mlx4_en_cee_config { bool pfc_state; - struct tc_configuration tc_config[MLX4_EN_NUM_UP]; + enum dcb_pfc_type dcb_pfc[MLX4_EN_NUM_UP]; }; - -struct mlx4_en_cee_params { - u8 dcbx_cap; - struct mlx4_en_cee_config dcb_cfg; -}; - #endif struct ethtool_flow_id { @@ -624,7 +614,8 @@ struct mlx4_en_priv { struct ieee_ets ets; u16 maxrate[IEEE_8021QAZ_MAX_TCS]; enum dcbnl_cndd_states cndd_state[IEEE_8021QAZ_MAX_TCS]; - struct mlx4_en_cee_params cee_params; + struct mlx4_en_cee_config cee_config; + u8 dcbx_cap; #endif #ifdef CONFIG_RFS_ACCEL spinlock_t filters_lock; diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c index 3d2095e5c61c..c5b2064297a1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -52,7 +52,7 @@ #define MLX4_FLAG_V_IGNORE_FCS_MASK 0x2 #define MLX4_IGNORE_FCS_MASK 0x1 -#define MLNX4_TX_MAX_NUMBER 8 +#define MLX4_TC_MAX_NUMBER 8 void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table) { @@ -2022,7 +2022,7 @@ int mlx4_max_tc(struct mlx4_dev *dev) u8 num_tc = dev->caps.max_tc_eth; if (!num_tc) - num_tc = MLNX4_TX_MAX_NUMBER; + num_tc = MLX4_TC_MAX_NUMBER; return num_tc; } -- cgit v1.2.3-58-ga151 From 7a61fc86af4a0c957c5b8c5777ab21d5cc286748 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Sun, 11 Sep 2016 10:56:20 +0300 Subject: net/mlx4_en: Fix panic on xmit while port is down When port is down, tx drop counter update is not needed. Updating the counter in this case can cause a kernel panic as when the port is down, ring can be NULL. Fixes: 63a664b7e92b ("net/mlx4_en: fix tx_dropped bug") Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 9df87ca0515a..e2509bba3e7c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -818,7 +818,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) real_size = get_real_size(skb, shinfo, dev, &lso_header_size, &inline_ok, &fragptr); if (unlikely(!real_size)) - goto tx_drop; + goto tx_drop_count; /* Align descriptor to TXBB size */ desc_size = ALIGN(real_size, TXBB_SIZE); @@ -826,7 +826,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(nr_txbb > MAX_DESC_TXBBS)) { if (netif_msg_tx_err(priv)) en_warn(priv, "Oversized header or SG list\n"); - goto tx_drop; + goto tx_drop_count; } bf_ok = ring->bf_enabled; @@ -1071,9 +1071,10 @@ tx_drop_unmap: PCI_DMA_TODEVICE); } +tx_drop_count: + ring->tx_dropped++; tx_drop: dev_kfree_skb_any(skb); - ring->tx_dropped++; return NETDEV_TX_OK; } @@ -1106,7 +1107,7 @@ netdev_tx_t mlx4_en_xmit_frame(struct mlx4_en_rx_alloc *frame, goto tx_drop; if (mlx4_en_is_tx_ring_full(ring)) - goto tx_drop; + goto tx_drop_count; /* fetch ring->cons far ahead before needing it to avoid stall */ ring_cons = READ_ONCE(ring->cons); @@ -1176,7 +1177,8 @@ netdev_tx_t mlx4_en_xmit_frame(struct mlx4_en_rx_alloc *frame, return NETDEV_TX_OK; -tx_drop: +tx_drop_count: ring->tx_dropped++; +tx_drop: return NETDEV_TX_BUSY; } -- cgit v1.2.3-58-ga151 From 3e1be7ad2d38c6bd6aeef96df9bd0a7822f4e51c Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 9 Sep 2016 22:43:12 +0800 Subject: bnx2: Reset device during driver initialization When system enters into kdump kernel because of kernel panic, it won't shutdown devices. On-flight DMA will continue transferring data until device driver initializes. All devices are supposed to reset during driver initialization. And this property is used to fix the kdump failure in system with intel iommu. Other systems with hardware iommu should be similar. Please check commit 091d42e ("iommu/vt-d: Copy translation tables from old kernel") and those commits around. But bnx2 driver doesn't reset device during driver initialization. The device resetting is deferred to net device up stage. This will cause hardware iommu handling failure on bnx2 device. And its resetting relies on firmware. So in this patch move the firmware requesting code to earlier bnx2_init_one(), then next call bnx2_reset_chip to reset device. Signed-off-by: Baoquan He Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 8fc3f3c137f8..505ceaf451e2 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -6356,10 +6356,6 @@ bnx2_open(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); int rc; - rc = bnx2_request_firmware(bp); - if (rc < 0) - goto out; - netif_carrier_off(dev); bnx2_disable_int(bp); @@ -6428,7 +6424,6 @@ open_err: bnx2_free_irq(bp); bnx2_free_mem(bp); bnx2_del_napi(bp); - bnx2_release_firmware(bp); goto out; } @@ -8575,6 +8570,12 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); + rc = bnx2_request_firmware(bp); + if (rc < 0) + goto error; + + + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | @@ -8607,6 +8608,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: + bnx2_release_firmware(bp); pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit v1.2.3-58-ga151 From 440f895aa97f81a2bdc02993da5360a1f6da2fb5 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Sun, 11 Sep 2016 21:43:34 +0200 Subject: drivers: net: phy: xgene: Fix 'remove' function If 'IS_ERR(pdata->clk)' is true, then 'clk_disable_unprepare(pdata->clk)' will do nothing. It is likely that 'if (!IS_ERR(pdata->clk))' was expected here. In fact, the test can even be removed because 'clk_disable_unprepare' already handles such cases. Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/phy/mdio-xgene.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/mdio-xgene.c b/drivers/net/phy/mdio-xgene.c index 775674808249..92af182951be 100644 --- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -424,10 +424,8 @@ static int xgene_mdio_remove(struct platform_device *pdev) mdiobus_unregister(mdio_bus); mdiobus_free(mdio_bus); - if (dev->of_node) { - if (IS_ERR(pdata->clk)) - clk_disable_unprepare(pdata->clk); - } + if (dev->of_node) + clk_disable_unprepare(pdata->clk); return 0; } -- cgit v1.2.3-58-ga151 From 54c5ef2e93ea002dc5dd63349298b2778fe59edb Mon Sep 17 00:00:00 2001 From: Beni Lev Date: Wed, 10 Aug 2016 17:03:43 +0300 Subject: iwlwifi: mvm: update TX queue before making a copy of the skb Off-channel action frames (such as ANQP frames) must be sent either on the AUX queue or on the offchannel queue, otherwise the firmware will cause a SYSASSERT. In the current implementation, the queue to be used is correctly set in the original skb, but this is done after it is copied. Thus the copy remains with the original, incorrect queue. Fix this by setting the queue in the original skb before copying it. Fixes: commit 5c08b0f5026f ("iwlwifi: mvm: don't override the rate with the AMSDU len") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Beni Lev Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index c6585ab48df3..b3a87a31de30 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -513,6 +513,15 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) int hdrlen = ieee80211_hdrlen(hdr->frame_control); int queue; + /* IWL_MVM_OFFCHANNEL_QUEUE is used for ROC packets that can be used + * in 2 different types of vifs, P2P & STATION. P2P uses the offchannel + * queue. STATION (HS2.0) uses the auxiliary context of the FW, + * and hence needs to be sent on the aux queue + */ + if (IEEE80211_SKB_CB(skb)->hw_queue == IWL_MVM_OFFCHANNEL_QUEUE && + skb_info->control.vif->type == NL80211_IFTYPE_STATION) + IEEE80211_SKB_CB(skb)->hw_queue = mvm->aux_queue; + memcpy(&info, skb->cb, sizeof(info)); if (WARN_ON_ONCE(info.flags & IEEE80211_TX_CTL_AMPDU)) @@ -526,16 +535,6 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) /* This holds the amsdu headers length */ skb_info->driver_data[0] = (void *)(uintptr_t)0; - /* - * IWL_MVM_OFFCHANNEL_QUEUE is used for ROC packets that can be used - * in 2 different types of vifs, P2P & STATION. P2P uses the offchannel - * queue. STATION (HS2.0) uses the auxiliary context of the FW, - * and hence needs to be sent on the aux queue - */ - if (IEEE80211_SKB_CB(skb)->hw_queue == IWL_MVM_OFFCHANNEL_QUEUE && - info.control.vif->type == NL80211_IFTYPE_STATION) - IEEE80211_SKB_CB(skb)->hw_queue = mvm->aux_queue; - queue = info.hw_queue; /* -- cgit v1.2.3-58-ga151 From 2a292822f00f7409fc0bd6b2d09efc5b8e6c9c5d Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 14 Sep 2016 13:09:24 +0200 Subject: net/mlx4_en: fix off by one in error handling If an error occurs in mlx4_init_eq_table the index used in the err_out_unmap label is one too big which results in a panic in mlx4_free_eq. This patch fixes the index in the error path. Signed-off-by: Sebastian Ott Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/eq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index f613977455e0..cf8f8a72a801 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -1305,8 +1305,8 @@ int mlx4_init_eq_table(struct mlx4_dev *dev) return 0; err_out_unmap: - while (i >= 0) - mlx4_free_eq(dev, &priv->eq_table.eq[i--]); + while (i > 0) + mlx4_free_eq(dev, &priv->eq_table.eq[--i]); #ifdef CONFIG_RFS_ACCEL for (i = 1; i <= dev->caps.num_ports; i++) { if (mlx4_priv(dev)->port[i].rmap) { -- cgit v1.2.3-58-ga151 From 7077dc415b113ac17a6696c432bad2d66574e4fb Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 14 Sep 2016 21:29:34 +0800 Subject: net: ethernet: mediatek: fix module loading automatically based on MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries for example will be added to modules.alias: alias of:N*T*Cmediatek,mt7623-ethC* mtk_eth_soc Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index d9199151a83e..3743af8f1ded 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1923,6 +1923,7 @@ const struct of_device_id of_mtk_match[] = { { .compatible = "mediatek,mt7623-eth" }, {}, }; +MODULE_DEVICE_TABLE(of, of_mtk_match); static struct platform_driver mtk_driver = { .probe = mtk_probe, -- cgit v1.2.3-58-ga151 From 01afd972a737879c1466a12f696601a2ce91ea84 Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 14 Sep 2016 19:06:44 +0300 Subject: net/ibm/emac: add set mac addr callback add realization for mac address set and remove dummy callback. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 4c9771d57d6e..2dfc60308648 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -980,6 +980,33 @@ static void emac_set_multicast_list(struct net_device *ndev) __emac_set_multicast_list(dev); } +static int emac_set_mac_address(struct net_device *ndev, void *sa) +{ + struct emac_instance *dev = netdev_priv(ndev); + struct sockaddr *addr = sa; + struct emac_regs __iomem *p = dev->emacp; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + mutex_lock(&dev->link_lock); + + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + + emac_rx_disable(dev); + emac_tx_disable(dev); + out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); + out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | + (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | + ndev->dev_addr[5]); + emac_tx_enable(dev); + emac_rx_enable(dev); + + mutex_unlock(&dev->link_lock); + + return 0; +} + static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu) { int rx_sync_size = emac_rx_sync_size(new_mtu); @@ -2686,7 +2713,7 @@ static const struct net_device_ops emac_netdev_ops = { .ndo_do_ioctl = emac_ioctl, .ndo_tx_timeout = emac_tx_timeout, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = emac_set_mac_address, .ndo_start_xmit = emac_start_xmit, .ndo_change_mtu = eth_change_mtu, }; @@ -2699,7 +2726,7 @@ static const struct net_device_ops emac_gige_netdev_ops = { .ndo_do_ioctl = emac_ioctl, .ndo_tx_timeout = emac_tx_timeout, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = emac_set_mac_address, .ndo_start_xmit = emac_start_xmit_sg, .ndo_change_mtu = emac_change_mtu, }; -- cgit v1.2.3-58-ga151 From 7106a069f45b15e63d14484e72969e64798e641c Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 14 Sep 2016 19:06:45 +0300 Subject: net/ibm/emac: add mutex to 'set multicast list' for preventing race conditions within ioctl calls. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 2dfc60308648..7af09cbc53f0 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -977,7 +977,10 @@ static void emac_set_multicast_list(struct net_device *ndev) dev->mcast_pending = 1; return; } + + mutex_lock(&dev->link_lock); __emac_set_multicast_list(dev); + mutex_unlock(&dev->link_lock); } static int emac_set_mac_address(struct net_device *ndev, void *sa) -- cgit v1.2.3-58-ga151 From bc6c03fa3cacd31b873e36ca16ef9678269deae6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 15 Sep 2016 03:45:07 +0000 Subject: nfp: fix error return code in nfp_net_netdev_open() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 73725d9dfd99 ("nfp: allocate ring SW structs dynamically") Signed-off-by: Wei Yongjun Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 252e4924de0f..39dadfca84ef 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -2044,12 +2044,16 @@ static int nfp_net_netdev_open(struct net_device *netdev) nn->rx_rings = kcalloc(nn->num_rx_rings, sizeof(*nn->rx_rings), GFP_KERNEL); - if (!nn->rx_rings) + if (!nn->rx_rings) { + err = -ENOMEM; goto err_free_lsc; + } nn->tx_rings = kcalloc(nn->num_tx_rings, sizeof(*nn->tx_rings), GFP_KERNEL); - if (!nn->tx_rings) + if (!nn->tx_rings) { + err = -ENOMEM; goto err_free_rx_rings; + } for (r = 0; r < nn->num_r_vecs; r++) { err = nfp_net_prepare_vector(nn, &nn->r_vecs[r], r); -- cgit v1.2.3-58-ga151 From cce94483e47e8e3d74cf4475dea33f9fd4b6ad9f Mon Sep 17 00:00:00 2001 From: Filipe Manco Date: Thu, 15 Sep 2016 17:10:46 +0200 Subject: xen-netback: fix error handling on netback_probe() In case of error during netback_probe() (e.g. an entry missing on the xenstore) netback_remove() is called on the new device, which will set the device backend state to XenbusStateClosed by calling set_backend_state(). However, the backend state wasn't initialized by netback_probe() at this point, which will cause and invalid transaction and set_backend_state() to BUG(). Initialize the backend state at the beginning of netback_probe() to XenbusStateInitialising, and create two new valid state transitions on set_backend_state(), from XenbusStateInitialising to XenbusStateClosed, and from XenbusStateInitialising to XenbusStateInitWait. Signed-off-by: Filipe Manco Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 46 ++++++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index 6a31f2610c23..daf4c7867102 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -271,6 +271,11 @@ static int netback_probe(struct xenbus_device *dev, be->dev = dev; dev_set_drvdata(&dev->dev, be); + be->state = XenbusStateInitialising; + err = xenbus_switch_state(dev, XenbusStateInitialising); + if (err) + goto fail; + sg = 1; do { @@ -383,11 +388,6 @@ static int netback_probe(struct xenbus_device *dev, be->hotplug_script = script; - err = xenbus_switch_state(dev, XenbusStateInitWait); - if (err) - goto fail; - - be->state = XenbusStateInitWait; /* This kicks hotplug scripts, so do it immediately. */ err = backend_create_xenvif(be); @@ -492,20 +492,20 @@ static inline void backend_switch_state(struct backend_info *be, /* Handle backend state transitions: * - * The backend state starts in InitWait and the following transitions are + * The backend state starts in Initialising and the following transitions are * allowed. * - * InitWait -> Connected - * - * ^ \ | - * | \ | - * | \ | - * | \ | - * | \ | - * | \ | - * | V V + * Initialising -> InitWait -> Connected + * \ + * \ ^ \ | + * \ | \ | + * \ | \ | + * \ | \ | + * \ | \ | + * \ | \ | + * V | V V * - * Closed <-> Closing + * Closed <-> Closing * * The state argument specifies the eventual state of the backend and the * function transitions to that state via the shortest path. @@ -515,6 +515,20 @@ static void set_backend_state(struct backend_info *be, { while (be->state != state) { switch (be->state) { + case XenbusStateInitialising: + switch (state) { + case XenbusStateInitWait: + case XenbusStateConnected: + case XenbusStateClosing: + backend_switch_state(be, XenbusStateInitWait); + break; + case XenbusStateClosed: + backend_switch_state(be, XenbusStateClosed); + break; + default: + BUG(); + } + break; case XenbusStateClosed: switch (state) { case XenbusStateInitWait: -- cgit v1.2.3-58-ga151 From 2835d2d9e366a2985b24051d228333bfba82f3a7 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 15 Sep 2016 22:47:51 +0200 Subject: bna: add missing per queue ethtool stat Commit ba5ca784 "bna: check for dma mapping errors" added besides other things a statistic that counts number of DMA buffer mapping failures per each Rx queue. This counter is not included in ethtool stats output. Fixes: ba5ca784 "bna: check for dma mapping errors" Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c index 0e4fdc3dd729..5671353fc7bc 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c +++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c @@ -31,7 +31,7 @@ #define BNAD_NUM_TXF_COUNTERS 12 #define BNAD_NUM_RXF_COUNTERS 10 #define BNAD_NUM_CQ_COUNTERS (3 + 5) -#define BNAD_NUM_RXQ_COUNTERS 6 +#define BNAD_NUM_RXQ_COUNTERS 7 #define BNAD_NUM_TXQ_COUNTERS 5 #define BNAD_ETHTOOL_STATS_NUM \ @@ -658,6 +658,8 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 *string) string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_allocbuf_failed", q_num); string += ETH_GSTRING_LEN; + sprintf(string, "rxq%d_mapbuf_failed", q_num); + string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_producer_index", q_num); string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_consumer_index", q_num); @@ -678,6 +680,9 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 *string) sprintf(string, "rxq%d_allocbuf_failed", q_num); string += ETH_GSTRING_LEN; + sprintf(string, "rxq%d_mapbuf_failed", + q_num); + string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_producer_index", q_num); string += ETH_GSTRING_LEN; -- cgit v1.2.3-58-ga151 From 37dd348270c1a48f0234354a06c0ce052b6c85b1 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 15 Sep 2016 22:47:52 +0200 Subject: bna: fix crash in bnad_get_strings() Commit 6e7333d "net: add rx_nohandler stat counter" added the new entry rx_nohandler into struct rtnl_link_stats64. Unfortunately the bna driver foolishly depends on the structure. It uses part of it for ethtool statistics and it's not bad but the driver assumes its size is constant as it defines string for each existing entry. The problem occurs when the structure is extended because you need to modify bna driver as well. If not any attempt to retrieve ethtool statistics results in crash in bnad_get_strings(). The patch changes BNAD_ETHTOOL_STATS_NUM so it counts real number of strings in the array and also removes rtnl_link_stats64 entries that are not used in output and are always zero. Fixes: 6e7333d "net: add rx_nohandler stat counter" Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 50 ++++++++++++------------- 1 file changed, 23 insertions(+), 27 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c index 5671353fc7bc..31f61a744d66 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c +++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c @@ -34,12 +34,7 @@ #define BNAD_NUM_RXQ_COUNTERS 7 #define BNAD_NUM_TXQ_COUNTERS 5 -#define BNAD_ETHTOOL_STATS_NUM \ - (sizeof(struct rtnl_link_stats64) / sizeof(u64) + \ - sizeof(struct bnad_drv_stats) / sizeof(u64) + \ - offsetof(struct bfi_enet_stats, rxf_stats[0]) / sizeof(u64)) - -static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { +static const char *bnad_net_stats_strings[] = { "rx_packets", "tx_packets", "rx_bytes", @@ -50,22 +45,10 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { "tx_dropped", "multicast", "collisions", - "rx_length_errors", - "rx_over_errors", "rx_crc_errors", "rx_frame_errors", - "rx_fifo_errors", - "rx_missed_errors", - - "tx_aborted_errors", - "tx_carrier_errors", "tx_fifo_errors", - "tx_heartbeat_errors", - "tx_window_errors", - - "rx_compressed", - "tx_compressed", "netif_queue_stop", "netif_queue_wakeup", @@ -254,6 +237,8 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { "fc_tx_fid_parity_errors", }; +#define BNAD_ETHTOOL_STATS_NUM ARRAY_SIZE(bnad_net_stats_strings) + static int bnad_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) { @@ -859,9 +844,9 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, u64 *buf) { struct bnad *bnad = netdev_priv(netdev); - int i, j, bi; + int i, j, bi = 0; unsigned long flags; - struct rtnl_link_stats64 *net_stats64; + struct rtnl_link_stats64 net_stats64; u64 *stats64; u32 bmap; @@ -876,14 +861,25 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, * under the same lock */ spin_lock_irqsave(&bnad->bna_lock, flags); - bi = 0; - memset(buf, 0, stats->n_stats * sizeof(u64)); - - net_stats64 = (struct rtnl_link_stats64 *)buf; - bnad_netdev_qstats_fill(bnad, net_stats64); - bnad_netdev_hwstats_fill(bnad, net_stats64); - bi = sizeof(*net_stats64) / sizeof(u64); + memset(&net_stats64, 0, sizeof(net_stats64)); + bnad_netdev_qstats_fill(bnad, &net_stats64); + bnad_netdev_hwstats_fill(bnad, &net_stats64); + + buf[bi++] = net_stats64.rx_packets; + buf[bi++] = net_stats64.tx_packets; + buf[bi++] = net_stats64.rx_bytes; + buf[bi++] = net_stats64.tx_bytes; + buf[bi++] = net_stats64.rx_errors; + buf[bi++] = net_stats64.tx_errors; + buf[bi++] = net_stats64.rx_dropped; + buf[bi++] = net_stats64.tx_dropped; + buf[bi++] = net_stats64.multicast; + buf[bi++] = net_stats64.collisions; + buf[bi++] = net_stats64.rx_length_errors; + buf[bi++] = net_stats64.rx_crc_errors; + buf[bi++] = net_stats64.rx_frame_errors; + buf[bi++] = net_stats64.tx_fifo_errors; /* Get netif_queue_stopped from stack */ bnad->stats.drv_stats.netif_queue_stopped = netif_queue_stopped(netdev); -- cgit v1.2.3-58-ga151 From 19cd120319ef5390404a5d9c829c3a7962f184a8 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Fri, 16 Sep 2016 10:50:13 +0200 Subject: stmmac: fix PWRDWN into the PMT register for global unicast. MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status register to generate power management events. So this patch is to properly set the RWKPKTEN [BIT(2)] inside the PMT register (needed in case of global unicast). Reported-by: Aditi SHARMA Signed-off-by: Giuseppe Cavallaro Cc: Alexandre TORGUE Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index cbefe9e2207c..885a5e64519d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -261,7 +261,7 @@ static void dwmac1000_pmt(struct mac_device_info *hw, unsigned long mode) } if (mode & WAKE_UCAST) { pr_debug("GMAC: WOL on global unicast\n"); - pmt |= global_unicast; + pmt |= power_down | global_unicast | wake_up_frame_en; } writel(pmt, ioaddr + GMAC_PMT); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index df5580dcdfed..51019b794be5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -102,7 +102,7 @@ static void dwmac4_pmt(struct mac_device_info *hw, unsigned long mode) } if (mode & WAKE_UCAST) { pr_debug("GMAC: WOL on global unicast\n"); - pmt |= global_unicast; + pmt |= power_down | global_unicast | wake_up_frame_en; } writel(pmt, ioaddr + GMAC_PMT); -- cgit v1.2.3-58-ga151 From 4de349e786a3a2d51bd02d56f3de151bbc3c3df9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 17 Aug 2016 12:41:08 -0300 Subject: can: flexcan: fix resume function On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 41c0fc9f3b14..16f7cadda5c3 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1268,11 +1268,10 @@ static int __maybe_unused flexcan_suspend(struct device *device) struct flexcan_priv *priv = netdev_priv(dev); int err; - err = flexcan_chip_disable(priv); - if (err) - return err; - if (netif_running(dev)) { + err = flexcan_chip_disable(priv); + if (err) + return err; netif_stop_queue(dev); netif_device_detach(dev); } @@ -1285,13 +1284,17 @@ static int __maybe_unused flexcan_resume(struct device *device) { struct net_device *dev = dev_get_drvdata(device); struct flexcan_priv *priv = netdev_priv(dev); + int err; priv->can.state = CAN_STATE_ERROR_ACTIVE; if (netif_running(dev)) { netif_device_attach(dev); netif_start_queue(dev); + err = flexcan_chip_enable(priv); + if (err) + return err; } - return flexcan_chip_enable(priv); + return 0; } static SIMPLE_DEV_PM_OPS(flexcan_pm_ops, flexcan_suspend, flexcan_resume); -- cgit v1.2.3-58-ga151 From babd6134a54d70efe875fa5661a20eaecb63f278 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Sun, 18 Sep 2016 18:20:27 +0300 Subject: net/mlx5: Fix flow counter bulk command out mailbox allocation The FW command output length should be only the length of struct mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy call which is invoked later in the driver to write over wrong memory address and corrupt kernel memory which results in random crashes. This bug was found using the kernel address sanitizer (kasan). Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Roi Dayan Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c index 9134010e2921..287ade151ec8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c @@ -425,11 +425,11 @@ struct mlx5_cmd_fc_bulk * mlx5_cmd_fc_bulk_alloc(struct mlx5_core_dev *dev, u16 id, int num) { struct mlx5_cmd_fc_bulk *b; - int outlen = sizeof(*b) + + int outlen = MLX5_ST_SZ_BYTES(query_flow_counter_out) + MLX5_ST_SZ_BYTES(traffic_counter) * num; - b = kzalloc(outlen, GFP_KERNEL); + b = kzalloc(sizeof(*b) + outlen, GFP_KERNEL); if (!b) return NULL; -- cgit v1.2.3-58-ga151 From 4eea37d7b92076fdeac2a21e5f4dbd92d286719d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 18 Sep 2016 18:20:28 +0300 Subject: net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code When enablement of the SRIOV e-switch in certain mode (switchdev or legacy) fails, we must set the mode to none. Otherwise, we'll run into double free based crashes when further attempting to deal with the e-switch (such as when disabling sriov or unloading the driver). Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 8b78f156214e..b247949df135 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1554,6 +1554,7 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) abort: esw_enable_vport(esw, 0, UC_ADDR_CHANGE); + esw->mode = SRIOV_NONE; return err; } -- cgit v1.2.3-58-ga151 From 6c419ba8e2580ab17c164db6e918e163d3537ec1 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 18 Sep 2016 18:20:29 +0300 Subject: net/mlx5: E-Switch, Handle mode change failures E-switch mode changes involve creating HW tables, potentially allocating netdevices, etc, and things can fail. Add an attempt to rollback to the existing mode when changing to the new mode fails. Only if rollback fails, getting proper SRIOV functionality requires module unload or sriov disablement/enablement. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 3dc83a9459a4..7de40e6b0c25 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -446,7 +446,7 @@ out: static int esw_offloads_start(struct mlx5_eswitch *esw) { - int err, num_vfs = esw->dev->priv.sriov.num_vfs; + int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs; if (esw->mode != SRIOV_LEGACY) { esw_warn(esw->dev, "Can't set offloads mode, SRIOV legacy not enabled\n"); @@ -455,8 +455,12 @@ static int esw_offloads_start(struct mlx5_eswitch *esw) mlx5_eswitch_disable_sriov(esw); err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_OFFLOADS); - if (err) - esw_warn(esw->dev, "Failed set eswitch to offloads, err %d\n", err); + if (err) { + esw_warn(esw->dev, "Failed setting eswitch to offloads, err %d\n", err); + err1 = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY); + if (err1) + esw_warn(esw->dev, "Failed setting eswitch back to legacy, err %d\n", err); + } return err; } @@ -508,12 +512,16 @@ create_ft_err: static int esw_offloads_stop(struct mlx5_eswitch *esw) { - int err, num_vfs = esw->dev->priv.sriov.num_vfs; + int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs; mlx5_eswitch_disable_sriov(esw); err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY); - if (err) - esw_warn(esw->dev, "Failed set eswitch legacy mode. err %d\n", err); + if (err) { + esw_warn(esw->dev, "Failed setting eswitch to legacy, err %d\n", err); + err1 = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_OFFLOADS); + if (err1) + esw_warn(esw->dev, "Failed setting eswitch back to offloads, err %d\n", err); + } return err; } -- cgit v1.2.3-58-ga151 From 67a99b7061c07b190ac6c39f136afedbb7aa86e9 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 19 Sep 2016 17:47:41 +0300 Subject: qed: Fix stack corruption on probe Commit fe56b9e6a8d95 ("qed: Add module with basic common support") has introduced a stack corruption during probe, where filling a local struct with data to be sent to management firmware is incorrectly filled; The data is written outside of the struct and corrupts the stack. Changes from v1: ---------------- - Correct the value written [Caught by David Laight] Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index a240f26344a4..f776a77794c5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1153,8 +1153,8 @@ qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn, p_drv_version = &union_data.drv_version; p_drv_version->version = p_ver->version; - for (i = 0; i < MCP_DRV_VER_STR_SIZE - 1; i += 4) { - val = cpu_to_be32(p_ver->name[i]); + for (i = 0; i < (MCP_DRV_VER_STR_SIZE - 4) / sizeof(u32); i++) { + val = cpu_to_be32(*((u32 *)&p_ver->name[i * sizeof(u32)])); *(__be32 *)&p_drv_version->name[i * sizeof(u32)] = val; } -- cgit v1.2.3-58-ga151 From 9b86a8d19bd6406a10de5f924bf2a003a502d427 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Tue, 20 Sep 2016 12:00:52 +0530 Subject: cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 4 ++-- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 15 +++++++++++++-- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 7 ++++++- drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 6 ++++++ drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h | 15 +++++++++++---- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 9 +++++++-- 6 files changed, 45 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 2e2aa9fec9bb..edd23386b47d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -419,8 +419,8 @@ struct link_config { unsigned short supported; /* link capabilities */ unsigned short advertising; /* advertised capabilities */ unsigned short lp_advertising; /* peer advertised capabilities */ - unsigned short requested_speed; /* speed user has requested */ - unsigned short speed; /* actual link speed */ + unsigned int requested_speed; /* speed user has requested */ + unsigned int speed; /* actual link speed */ unsigned char requested_fc; /* flow control user has requested */ unsigned char fc; /* actual link flow control */ unsigned char autoneg; /* autonegotiating? */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index c762a8c8c954..3ceafb55d6da 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -4305,10 +4305,17 @@ static const struct pci_error_handlers cxgb4_eeh = { .resume = eeh_resume, }; +/* Return true if the Link Configuration supports "High Speeds" (those greater + * than 1Gb/s). + */ static inline bool is_x_10g_port(const struct link_config *lc) { - return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 || - (lc->supported & FW_PORT_CAP_SPEED_40G) != 0; + unsigned int speeds, high_speeds; + + speeds = FW_PORT_CAP_SPEED_V(FW_PORT_CAP_SPEED_G(lc->supported)); + high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G); + + return high_speeds != 0; } static inline void init_rspq(struct adapter *adap, struct sge_rspq *q, @@ -4756,8 +4763,12 @@ static void print_port_info(const struct net_device *dev) bufp += sprintf(bufp, "1000/"); if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G) bufp += sprintf(bufp, "10G/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_25G) + bufp += sprintf(bufp, "25G/"); if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G) bufp += sprintf(bufp, "40G/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100G) + bufp += sprintf(bufp, "100G/"); if (bufp != buf) --bufp; sprintf(bufp, "BASE-%s", t4_get_port_type_description(pi->port_type)); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index dc92c80a75f4..660204bff726 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -3627,7 +3627,8 @@ void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf) } #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ - FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_25G | \ + FW_PORT_CAP_SPEED_40G | FW_PORT_CAP_SPEED_100G | \ FW_PORT_CAP_ANEG) /** @@ -7196,8 +7197,12 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) speed = 1000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) + speed = 25000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) + speed = 100000; lc = &pi->link_cfg; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index a89b30720e38..30507d44422c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -2265,6 +2265,12 @@ enum fw_port_cap { FW_PORT_CAP_802_3_ASM_DIR = 0x8000, }; +#define FW_PORT_CAP_SPEED_S 0 +#define FW_PORT_CAP_SPEED_M 0x3f +#define FW_PORT_CAP_SPEED_V(x) ((x) << FW_PORT_CAP_SPEED_S) +#define FW_PORT_CAP_SPEED_G(x) \ + (((x) >> FW_PORT_CAP_SPEED_S) & FW_PORT_CAP_SPEED_M) + enum fw_port_mdi { FW_PORT_CAP_MDI_UNCHANGED, FW_PORT_CAP_MDI_AUTO, diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h index 8ee541431e8b..17a2bbcf93f0 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h @@ -108,8 +108,8 @@ struct link_config { unsigned int supported; /* link capabilities */ unsigned int advertising; /* advertised capabilities */ unsigned short lp_advertising; /* peer advertised capabilities */ - unsigned short requested_speed; /* speed user has requested */ - unsigned short speed; /* actual link speed */ + unsigned int requested_speed; /* speed user has requested */ + unsigned int speed; /* actual link speed */ unsigned char requested_fc; /* flow control user has requested */ unsigned char fc; /* actual link flow control */ unsigned char autoneg; /* autonegotiating? */ @@ -271,10 +271,17 @@ static inline bool is_10g_port(const struct link_config *lc) return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0; } +/* Return true if the Link Configuration supports "High Speeds" (those greater + * than 1Gb/s). + */ static inline bool is_x_10g_port(const struct link_config *lc) { - return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 || - (lc->supported & FW_PORT_CAP_SPEED_40G) != 0; + unsigned int speeds, high_speeds; + + speeds = FW_PORT_CAP_SPEED_V(FW_PORT_CAP_SPEED_G(lc->supported)); + high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G); + + return high_speeds != 0; } static inline unsigned int core_ticks_per_usec(const struct adapter *adapter) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 427bfa71388b..b5622b1689e9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -314,8 +314,9 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, } #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ - FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ - FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG) + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_25G | \ + FW_PORT_CAP_SPEED_40G | FW_PORT_CAP_SPEED_100G | \ + FW_PORT_CAP_ANEG) /** * init_link_config - initialize a link's SW state @@ -1712,8 +1713,12 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) speed = 1000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) + speed = 25000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) + speed = 100000; /* * Scan all of our "ports" (Virtual Interfaces) looking for -- cgit v1.2.3-58-ga151 From e6449539828ac3b7c74b648793291640bcca8259 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:05 +0800 Subject: r8152: move some functions Move the following functions forward. r8152_mmd_indirect() r8152_mmd_read() r8152_mmd_write() r8152_eee_en() r8152b_enable_eee() r8153_eee_en() r8153_enable_eee() r8152b_enable_fc() r8153_aldps_en() Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 224 ++++++++++++++++++++++++------------------------ 1 file changed, 112 insertions(+), 112 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index f41a8ad4740e..ae7db460baa2 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2552,6 +2552,77 @@ static void r8152_aldps_en(struct r8152 *tp, bool enable) } } +static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg) +{ + ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev); + ocp_reg_write(tp, OCP_EEE_DATA, reg); + ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev); +} + +static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg) +{ + u16 data; + + r8152_mmd_indirect(tp, dev, reg); + data = ocp_reg_read(tp, OCP_EEE_DATA); + ocp_reg_write(tp, OCP_EEE_AR, 0x0000); + + return data; +} + +static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data) +{ + r8152_mmd_indirect(tp, dev, reg); + ocp_reg_write(tp, OCP_EEE_DATA, data); + ocp_reg_write(tp, OCP_EEE_AR, 0x0000); +} + +static void r8152_eee_en(struct r8152 *tp, bool enable) +{ + u16 config1, config2, config3; + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); + config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask; + config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2); + config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask; + + if (enable) { + ocp_data |= EEE_RX_EN | EEE_TX_EN; + config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN; + config1 |= sd_rise_time(1); + config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN; + config3 |= fast_snr(42); + } else { + ocp_data &= ~(EEE_RX_EN | EEE_TX_EN); + config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | + RX_QUIET_EN); + config1 |= sd_rise_time(7); + config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN); + config3 |= fast_snr(511); + } + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); + ocp_reg_write(tp, OCP_EEE_CONFIG1, config1); + ocp_reg_write(tp, OCP_EEE_CONFIG2, config2); + ocp_reg_write(tp, OCP_EEE_CONFIG3, config3); +} + +static void r8152b_enable_eee(struct r8152 *tp) +{ + r8152_eee_en(tp, true); + r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX); +} + +static void r8152b_enable_fc(struct r8152 *tp) +{ + u16 anar; + + anar = r8152_mdio_read(tp, MII_ADVERTISE); + anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + r8152_mdio_write(tp, MII_ADVERTISE, anar); +} + static void rtl8152_disable(struct r8152 *tp) { r8152_aldps_en(tp, false); @@ -2701,6 +2772,47 @@ static void r8152b_enter_oob(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); } +static void r8153_aldps_en(struct r8152 *tp, bool enable) +{ + u16 data; + + data = ocp_reg_read(tp, OCP_POWER_CFG); + if (enable) { + data |= EN_ALDPS; + ocp_reg_write(tp, OCP_POWER_CFG, data); + } else { + data &= ~EN_ALDPS; + ocp_reg_write(tp, OCP_POWER_CFG, data); + msleep(20); + } +} + +static void r8153_eee_en(struct r8152 *tp, bool enable) +{ + u32 ocp_data; + u16 config; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); + config = ocp_reg_read(tp, OCP_EEE_CFG); + + if (enable) { + ocp_data |= EEE_RX_EN | EEE_TX_EN; + config |= EEE10_EN; + } else { + ocp_data &= ~(EEE_RX_EN | EEE_TX_EN); + config &= ~EEE10_EN; + } + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); + ocp_reg_write(tp, OCP_EEE_CFG, config); +} + +static void r8153_enable_eee(struct r8152 *tp) +{ + r8153_eee_en(tp, true); + ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); +} + static void r8153_hw_phy_cfg(struct r8152 *tp) { u32 ocp_data; @@ -2866,21 +2978,6 @@ static void r8153_enter_oob(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); } -static void r8153_aldps_en(struct r8152 *tp, bool enable) -{ - u16 data; - - data = ocp_reg_read(tp, OCP_POWER_CFG); - if (enable) { - data |= EN_ALDPS; - ocp_reg_write(tp, OCP_POWER_CFG, data); - } else { - data &= ~EN_ALDPS; - ocp_reg_write(tp, OCP_POWER_CFG, data); - msleep(20); - } -} - static void rtl8153_disable(struct r8152 *tp) { r8153_aldps_en(tp, false); @@ -3246,103 +3343,6 @@ static int rtl8152_close(struct net_device *netdev) return res; } -static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg) -{ - ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev); - ocp_reg_write(tp, OCP_EEE_DATA, reg); - ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev); -} - -static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg) -{ - u16 data; - - r8152_mmd_indirect(tp, dev, reg); - data = ocp_reg_read(tp, OCP_EEE_DATA); - ocp_reg_write(tp, OCP_EEE_AR, 0x0000); - - return data; -} - -static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data) -{ - r8152_mmd_indirect(tp, dev, reg); - ocp_reg_write(tp, OCP_EEE_DATA, data); - ocp_reg_write(tp, OCP_EEE_AR, 0x0000); -} - -static void r8152_eee_en(struct r8152 *tp, bool enable) -{ - u16 config1, config2, config3; - u32 ocp_data; - - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); - config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask; - config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2); - config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask; - - if (enable) { - ocp_data |= EEE_RX_EN | EEE_TX_EN; - config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN; - config1 |= sd_rise_time(1); - config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN; - config3 |= fast_snr(42); - } else { - ocp_data &= ~(EEE_RX_EN | EEE_TX_EN); - config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | - RX_QUIET_EN); - config1 |= sd_rise_time(7); - config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN); - config3 |= fast_snr(511); - } - - ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); - ocp_reg_write(tp, OCP_EEE_CONFIG1, config1); - ocp_reg_write(tp, OCP_EEE_CONFIG2, config2); - ocp_reg_write(tp, OCP_EEE_CONFIG3, config3); -} - -static void r8152b_enable_eee(struct r8152 *tp) -{ - r8152_eee_en(tp, true); - r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX); -} - -static void r8153_eee_en(struct r8152 *tp, bool enable) -{ - u32 ocp_data; - u16 config; - - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); - config = ocp_reg_read(tp, OCP_EEE_CFG); - - if (enable) { - ocp_data |= EEE_RX_EN | EEE_TX_EN; - config |= EEE10_EN; - } else { - ocp_data &= ~(EEE_RX_EN | EEE_TX_EN); - config &= ~EEE10_EN; - } - - ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); - ocp_reg_write(tp, OCP_EEE_CFG, config); -} - -static void r8153_enable_eee(struct r8152 *tp) -{ - r8153_eee_en(tp, true); - ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); -} - -static void r8152b_enable_fc(struct r8152 *tp) -{ - u16 anar; - - anar = r8152_mdio_read(tp, MII_ADVERTISE); - anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; - r8152_mdio_write(tp, MII_ADVERTISE, anar); -} - static void rtl_tally_reset(struct r8152 *tp) { u32 ocp_data; -- cgit v1.2.3-58-ga151 From 2dd436daac7848dbf3fe799cf59c1408871a14e3 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:06 +0800 Subject: r8152: move enabling PHY Move enabling PHY to init(), otherwise some other settings may fail. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 43 +++++++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 18 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ae7db460baa2..dbf11ba9d91c 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2632,14 +2632,6 @@ static void rtl8152_disable(struct r8152 *tp) static void r8152b_hw_phy_cfg(struct r8152 *tp) { - u16 data; - - data = r8152_mdio_read(tp, MII_BMCR); - if (data & BMCR_PDOWN) { - data &= ~BMCR_PDOWN; - r8152_mdio_write(tp, MII_BMCR, data); - } - set_bit(PHY_RESET, &tp->flags); } @@ -2818,16 +2810,6 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) u32 ocp_data; u16 data; - if (tp->version == RTL_VER_03 || tp->version == RTL_VER_04 || - tp->version == RTL_VER_05) - ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L); - - data = r8152_mdio_read(tp, MII_BMCR); - if (data & BMCR_PDOWN) { - data &= ~BMCR_PDOWN; - r8152_mdio_write(tp, MII_BMCR, data); - } - if (tp->version == RTL_VER_03) { data = ocp_reg_read(tp, OCP_EEE_CFG); data &= ~CTAP_SHORT_EN; @@ -3355,10 +3337,17 @@ static void rtl_tally_reset(struct r8152 *tp) static void r8152b_init(struct r8152 *tp) { u32 ocp_data; + u16 data; if (test_bit(RTL8152_UNPLUG, &tp->flags)) return; + data = r8152_mdio_read(tp, MII_BMCR); + if (data & BMCR_PDOWN) { + data &= ~BMCR_PDOWN; + r8152_mdio_write(tp, MII_BMCR, data); + } + r8152_aldps_en(tp, false); if (tp->version == RTL_VER_01) { @@ -3394,6 +3383,7 @@ static void r8152b_init(struct r8152 *tp) static void r8153_init(struct r8152 *tp) { u32 ocp_data; + u16 data; int i; if (test_bit(RTL8152_UNPLUG, &tp->flags)) @@ -3416,6 +3406,23 @@ static void r8153_init(struct r8152 *tp) msleep(20); } + if (tp->version == RTL_VER_03 || tp->version == RTL_VER_04 || + tp->version == RTL_VER_05) + ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L); + + data = r8152_mdio_read(tp, MII_BMCR); + if (data & BMCR_PDOWN) { + data &= ~BMCR_PDOWN; + r8152_mdio_write(tp, MII_BMCR, data); + } + + for (i = 0; i < 500; i++) { + ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK; + if (ocp_data == PHY_STAT_LAN_ON) + break; + msleep(20); + } + usb_disable_lpm(tp->udev); r8153_u2p3en(tp, false); -- cgit v1.2.3-58-ga151 From ef39df8eaba48c0de779440f41a648b17a560953 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:07 +0800 Subject: r8152: move PHY settings to hw_phy_cfg Move the PHY relative settings together to hw_phy_cfg(). Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index dbf11ba9d91c..9ce5bd549482 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2632,6 +2632,10 @@ static void rtl8152_disable(struct r8152 *tp) static void r8152b_hw_phy_cfg(struct r8152 *tp) { + r8152b_enable_eee(tp); + r8152_aldps_en(tp, true); + r8152b_enable_fc(tp); + set_bit(PHY_RESET, &tp->flags); } @@ -2839,6 +2843,10 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) sram_write(tp, SRAM_10M_AMP1, 0x00af); sram_write(tp, SRAM_10M_AMP2, 0x0208); + r8153_enable_eee(tp); + r8153_aldps_en(tp, true); + r8152b_enable_fc(tp); + set_bit(PHY_RESET, &tp->flags); } @@ -3369,9 +3377,6 @@ static void r8152b_init(struct r8152 *tp) SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK; ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data); - r8152b_enable_eee(tp); - r8152_aldps_en(tp, true); - r8152b_enable_fc(tp); rtl_tally_reset(tp); /* enable rx aggregation */ @@ -3490,9 +3495,6 @@ static void r8153_init(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); - r8153_enable_eee(tp); - r8153_aldps_en(tp, true); - r8152b_enable_fc(tp); rtl_tally_reset(tp); r8153_u2p3en(tp, true); } -- cgit v1.2.3-58-ga151 From af0287ec10c62c84cc5cd1bad4fd37644a1ac41d Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:08 +0800 Subject: r8152: remove r8153_enable_eee Remove r8153_enable_eee(). Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 9ce5bd549482..e7a05dd2be97 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2803,12 +2803,6 @@ static void r8153_eee_en(struct r8152 *tp, bool enable) ocp_reg_write(tp, OCP_EEE_CFG, config); } -static void r8153_enable_eee(struct r8152 *tp) -{ - r8153_eee_en(tp, true); - ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); -} - static void r8153_hw_phy_cfg(struct r8152 *tp) { u32 ocp_data; @@ -2843,7 +2837,9 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) sram_write(tp, SRAM_10M_AMP1, 0x00af); sram_write(tp, SRAM_10M_AMP2, 0x0208); - r8153_enable_eee(tp); + r8153_eee_en(tp, true); + ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); + r8153_aldps_en(tp, true); r8152b_enable_fc(tp); -- cgit v1.2.3-58-ga151 From d768c61bc353a0e0de3f839e1de99eee7d4eca10 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:09 +0800 Subject: r8152: disable ALDPS and EEE before setting PHY Disable ALDPS and EEE to avoid the possible failure when setting the PHY. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index e7a05dd2be97..c254248863d4 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -32,7 +32,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "5" +#define NET_VERSION "6" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -2808,6 +2808,13 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) u32 ocp_data; u16 data; + /* disable ALDPS before updating the PHY parameters */ + r8153_aldps_en(tp, false); + + /* disable EEE before updating the PHY parameters */ + r8153_eee_en(tp, false); + ocp_reg_write(tp, OCP_EEE_ADV, 0); + if (tp->version == RTL_VER_03) { data = ocp_reg_read(tp, OCP_EEE_CFG); data &= ~CTAP_SHORT_EN; @@ -3390,7 +3397,6 @@ static void r8153_init(struct r8152 *tp) if (test_bit(RTL8152_UNPLUG, &tp->flags)) return; - r8153_aldps_en(tp, false); r8153_u1u2en(tp, false); for (i = 0; i < 500; i++) { -- cgit v1.2.3-58-ga151 From 8d58790b832e13d6006d842037732304af357c3c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 19 Sep 2016 21:34:01 +0200 Subject: net: can: ifi: Configure transmitter delay Configure the transmitter delay register at +0x1c to correctly handle the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample point) to a proper offset, so that the TDC mechanism works and won't generate error frames on the CAN link. Signed-off-by: Marek Vasut Cc: Marc Kleine-Budde Cc: Mark Rutland Cc: Oliver Hartkopp Cc: Wolfgang Grandegger Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ifi_canfd/ifi_canfd.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/ifi_canfd/ifi_canfd.c b/drivers/net/can/ifi_canfd/ifi_canfd.c index 2d1d22eec750..368bb0710d8f 100644 --- a/drivers/net/can/ifi_canfd/ifi_canfd.c +++ b/drivers/net/can/ifi_canfd/ifi_canfd.c @@ -81,6 +81,10 @@ #define IFI_CANFD_TIME_SET_TIMEA_4_12_6_6 BIT(15) #define IFI_CANFD_TDELAY 0x1c +#define IFI_CANFD_TDELAY_DEFAULT 0xb +#define IFI_CANFD_TDELAY_MASK 0x3fff +#define IFI_CANFD_TDELAY_ABS BIT(14) +#define IFI_CANFD_TDELAY_EN BIT(15) #define IFI_CANFD_ERROR 0x20 #define IFI_CANFD_ERROR_TX_OFFSET 0 @@ -641,7 +645,7 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev) struct ifi_canfd_priv *priv = netdev_priv(ndev); const struct can_bittiming *bt = &priv->can.bittiming; const struct can_bittiming *dbt = &priv->can.data_bittiming; - u16 brp, sjw, tseg1, tseg2; + u16 brp, sjw, tseg1, tseg2, tdc; /* Configure bit timing */ brp = bt->brp - 2; @@ -664,6 +668,11 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev) (brp << IFI_CANFD_TIME_PRESCALE_OFF) | (sjw << IFI_CANFD_TIME_SJW_OFF_7_9_8_8), priv->base + IFI_CANFD_FTIME); + + /* Configure transmitter delay */ + tdc = (dbt->brp * (dbt->phase_seg1 + 1)) & IFI_CANFD_TDELAY_MASK; + writel(IFI_CANFD_TDELAY_EN | IFI_CANFD_TDELAY_ABS | tdc, + priv->base + IFI_CANFD_TDELAY); } static void ifi_canfd_set_filter(struct net_device *ndev, const u32 id, -- cgit v1.2.3-58-ga151 From fba1296624bf95fc07057da1e26beee8a733180c Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Tue, 20 Sep 2016 14:55:31 +0300 Subject: net/mlx4_core: Fix to clean devlink resources This patch cleans devlink resources by calling devlink_port_unregister() to avoid the following issues: - Kernel panic when triggering reset flow. - Memory leak due to unfreed resources in mlx4_init_port_info(). Fixes: 09d4d087cd48 ("mlx4: Implement devlink interface") Signed-off-by: Kamal Heib Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 75dd2e3d3059..7183ac4135d2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -2970,6 +2970,7 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port) mlx4_err(dev, "Failed to create mtu file for port %d\n", port); device_remove_file(&info->dev->persist->pdev->dev, &info->port_attr); + devlink_port_unregister(&info->devlink_port); info->port = -1; } @@ -2984,6 +2985,8 @@ static void mlx4_cleanup_port_info(struct mlx4_port_info *info) device_remove_file(&info->dev->persist->pdev->dev, &info->port_attr); device_remove_file(&info->dev->persist->pdev->dev, &info->port_mtu_attr); + devlink_port_unregister(&info->devlink_port); + #ifdef CONFIG_RFS_ACCEL free_irq_cpu_rmap(info->rmap); info->rmap = NULL; -- cgit v1.2.3-58-ga151