From 94a78b79cb5f14c09a42522738d6694c6a1cdd20 Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Mon, 27 Apr 2009 03:27:43 -0700 Subject: bnx2x: Separated FW from the source. >From now on FW will be downloaded from the binary file using request_firmware. There will be different files for every supported chip. Currently 57710 (e1) and 57711 (e1h). File names have the following format: bnx2x--.fw. ihex versions of current FW files are submitted in the next patch. Each binary file has a header in the following format: struct bnx2x_fw_file_section { __be32 len; __be32 offset; } struct bnx2x_fw_file_hdr { struct bnx2x_fw_file_section init_ops; struct bnx2x_fw_file_section init_ops_offsets; struct bnx2x_fw_file_section init_data; struct bnx2x_fw_file_section tsem_int_table_data; struct bnx2x_fw_file_section tsem_pram_data; struct bnx2x_fw_file_section usem_int_table_data; struct bnx2x_fw_file_section usem_pram_data; struct bnx2x_fw_file_section csem_int_table_data; struct bnx2x_fw_file_section csem_pram_data; struct bnx2x_fw_file_section xsem_int_table_data; struct bnx2x_fw_file_section xsem_pram_data; struct bnx2x_fw_file_section fw_version; } Each bnx2x_fw_file_section contains the length and the offset of the appropriate section in the binary file. Values are stored in the big endian format. Data types of arrays: init_data __be32 init_ops_offsets __be16 XXsem_pram_data u8 XXsem_int_table_data u8 init_ops struct raw_op { u8 op; __be24 offset; __be32 data; } fw_version u8 >From now boundaries of a specific initialization stage are stored in init_ops_offsets array instead of being defined by separate macroes. The index in init_ops_offsets is calculated by BLOCK_OPS_IDX macro: #define BLOCK_OPS_IDX(block, stage, end) \ (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end)) Security: In addition to sanity check of array boundaries bnx2x will check a FW version. Additional checks might be added in the future. Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_init_ops.h | 442 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 442 insertions(+) create mode 100644 drivers/net/bnx2x_init_ops.h (limited to 'drivers/net/bnx2x_init_ops.h') diff --git a/drivers/net/bnx2x_init_ops.h b/drivers/net/bnx2x_init_ops.h new file mode 100644 index 000000000000..32552b9366cb --- /dev/null +++ b/drivers/net/bnx2x_init_ops.h @@ -0,0 +1,442 @@ +/* bnx2x_init_ops.h: Broadcom Everest network driver. + * Static functions needed during the initialization. + * This file is "included" in bnx2x_main.c. + * + * Copyright (c) 2007-2009 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Eilon Greenstein + * Written by: Vladislav Zolotarov + */ +#ifndef BNX2X_INIT_OPS_H +#define BNX2X_INIT_OPS_H + +static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val); +static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len); + +static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data, + u32 len) +{ + int i; + + for (i = 0; i < len; i++) { + REG_WR(bp, addr + i*4, data[i]); + if (!(i % 10000)) { + touch_softlockup_watchdog(); + cpu_relax(); + } + } +} + +static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data, + u16 len) +{ + int i; + + for (i = 0; i < len; i++) { + REG_WR_IND(bp, addr + i*4, data[i]); + if (!(i % 10000)) { + touch_softlockup_watchdog(); + cpu_relax(); + } + } +} + +static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len) +{ + int offset = 0; + + if (bp->dmae_ready) { + while (len > DMAE_LEN32_WR_MAX) { + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, DMAE_LEN32_WR_MAX); + offset += DMAE_LEN32_WR_MAX * 4; + len -= DMAE_LEN32_WR_MAX; + } + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, len); + } else + bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len); +} + +static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) +{ + u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4)); + u32 buf_len32 = buf_len / 4; + int i; + + memset(bp->gunzip_buf, fill, buf_len); + + for (i = 0; i < len; i += buf_len32) { + u32 cur_len = min(buf_len32, len - i); + + bnx2x_write_big_buf(bp, addr + i * 4, cur_len); + } +} + +static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data, + u32 len64) +{ + u32 buf_len32 = FW_BUF_SIZE / 4; + u32 len = len64 * 2; + u64 data64 = 0; + int i; + + /* 64 bit value is in a blob: first low DWORD, then high DWORD */ + data64 = HILO_U64((*(data + 1)), (*data)); + len64 = min((u32)(FW_BUF_SIZE/8), len64); + for (i = 0; i < len64; i++) { + u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i; + + *pdata = data64; + } + + for (i = 0; i < len; i += buf_len32) { + u32 cur_len = min(buf_len32, len - i); + + bnx2x_write_big_buf(bp, addr + i * 4, cur_len); + } +} + +/********************************************************* + There are different blobs for each PRAM section. + In addition, each blob write operation is divided into a few operations + in order to decrease the amount of phys. contiguous buffer needed. + Thus, when we select a blob the address may be with some offset + from the beginning of PRAM section. + The same holds for the INT_TABLE sections. +**********************************************************/ +#define IF_IS_INT_TABLE_ADDR(base, addr) \ + if (((base) <= (addr)) && ((base) + 0x400 >= (addr))) + +#define IF_IS_PRAM_ADDR(base, addr) \ + if (((base) <= (addr)) && ((base) + 0x40000 >= (addr))) + +static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, const u8 *data) +{ + IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr) + data = bp->tsem_int_table_data; + else IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr) + data = bp->csem_int_table_data; + else IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr) + data = bp->usem_int_table_data; + else IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr) + data = bp->xsem_int_table_data; + else IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr) + data = bp->tsem_pram_data; + else IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr) + data = bp->csem_pram_data; + else IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr) + data = bp->usem_pram_data; + else IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr) + data = bp->xsem_pram_data; + + return data; +} + +static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len) +{ + int offset = 0; + + if (bp->dmae_ready) { + while (len > DMAE_LEN32_WR_MAX) { + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, DMAE_LEN32_WR_MAX); + offset += DMAE_LEN32_WR_MAX * 4; + len -= DMAE_LEN32_WR_MAX; + } + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, len); + } else + bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len); +} + +static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data, + u32 len) +{ + /* This is needed for NO_ZIP mode, currently supported + in little endian mode only */ + data = (const u32*)bnx2x_sel_blob(bp, addr, (const u8*)data); + + if ((len * 4) > FW_BUF_SIZE) { + BNX2X_ERR("LARGE DMAE OPERATION ! " + "addr 0x%x len 0x%x\n", addr, len*4); + return; + } + memcpy(bp->gunzip_buf, data, len * 4); + + bnx2x_write_big_buf_wb(bp, addr, len); +} + +static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr, + u32 len, u32 blob_off) +{ + int rc, i; + const u8 *data = NULL; + + data = bnx2x_sel_blob(bp, addr, data) + 4*blob_off; + + if (data == NULL) { + panic("Blob not found for addr 0x%x\n", addr); + return; + } + + rc = bnx2x_gunzip(bp, data, len); + if (rc) { + BNX2X_ERR("gunzip failed ! addr 0x%x rc %d\n", addr, rc); + BNX2X_ERR("blob_offset=0x%x\n", blob_off); + return; + } + + /* gunzip_outlen is in dwords */ + len = bp->gunzip_outlen; + for (i = 0; i < len; i++) + ((u32 *)bp->gunzip_buf)[i] = + cpu_to_le32(((u32 *)bp->gunzip_buf)[i]); + + bnx2x_write_big_buf_wb(bp, addr, len); +} + +static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage) +{ + int hw_wr, i; + u16 op_start = + bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_START)]; + u16 op_end = + bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_END)]; + union init_op *op; + u32 op_type, addr, len; + const u32 *data, *data_base; + + /* If empty block */ + if (op_start == op_end) + return; + + if (CHIP_REV_IS_FPGA(bp)) + hw_wr = OP_WR_FPGA; + else if (CHIP_REV_IS_EMUL(bp)) + hw_wr = OP_WR_EMUL; + else + hw_wr = OP_WR_ASIC; + + data_base = bp->init_data; + + for (i = op_start; i < op_end; i++) { + + op = (union init_op *)&(bp->init_ops[i]); + + op_type = op->str_wr.op; + addr = op->str_wr.offset; + len = op->str_wr.data_len; + data = data_base + op->str_wr.data_off; + + /* HW/EMUL specific */ + if (unlikely((op_type > OP_WB) && (op_type == hw_wr))) + op_type = OP_WR; + + switch (op_type) { + case OP_RD: + REG_RD(bp, addr); + break; + case OP_WR: + REG_WR(bp, addr, op->write.val); + break; + case OP_SW: + bnx2x_init_str_wr(bp, addr, data, len); + break; + case OP_WB: + bnx2x_init_wr_wb(bp, addr, data, len); + break; + case OP_SI: + bnx2x_init_ind_wr(bp, addr, data, len); + break; + case OP_ZR: + bnx2x_init_fill(bp, addr, 0, op->zero.len); + break; + case OP_ZP: + bnx2x_init_wr_zp(bp, addr, len, + op->str_wr.data_off); + break; + case OP_WR_64: + bnx2x_init_wr_64(bp, addr, data, len); + break; + default: + /* happens whenever an op is of a diff HW */ +#if 0 + DP(NETIF_MSG_HW, "skipping init operation " + "index %d[%d:%d]: type %d addr 0x%x " + "len %d(0x%x)\n", + i, op_start, op_end, op_type, addr, len, len); +#endif + break; + } + } +} + +/* PXP */ +static void bnx2x_init_pxp(struct bnx2x *bp) +{ + u16 devctl; + int r_order, w_order; + u32 val, i; + + pci_read_config_word(bp->pdev, + bp->pcie_cap + PCI_EXP_DEVCTL, &devctl); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); + w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); + if (bp->mrrs == -1) + r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); + else { + DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); + r_order = bp->mrrs; + } + + if (r_order > MAX_RD_ORD) { + DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n", + r_order, MAX_RD_ORD); + r_order = MAX_RD_ORD; + } + if (w_order > MAX_WR_ORD) { + DP(NETIF_MSG_HW, "write order of %d order adjusted to %d\n", + w_order, MAX_WR_ORD); + w_order = MAX_WR_ORD; + } + if (CHIP_REV_IS_FPGA(bp)) { + DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n"); + w_order = 0; + } + DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order); + + for (i = 0; i < NUM_RD_Q-1; i++) { + REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l); + REG_WR(bp, read_arb_addr[i].add, + read_arb_data[i][r_order].add); + REG_WR(bp, read_arb_addr[i].ubound, + read_arb_data[i][r_order].ubound); + } + + for (i = 0; i < NUM_WR_Q-1; i++) { + if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) || + (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) { + + REG_WR(bp, write_arb_addr[i].l, + write_arb_data[i][w_order].l); + + REG_WR(bp, write_arb_addr[i].add, + write_arb_data[i][w_order].add); + + REG_WR(bp, write_arb_addr[i].ubound, + write_arb_data[i][w_order].ubound); + } else { + + val = REG_RD(bp, write_arb_addr[i].l); + REG_WR(bp, write_arb_addr[i].l, + val | (write_arb_data[i][w_order].l << 10)); + + val = REG_RD(bp, write_arb_addr[i].add); + REG_WR(bp, write_arb_addr[i].add, + val | (write_arb_data[i][w_order].add << 10)); + + val = REG_RD(bp, write_arb_addr[i].ubound); + REG_WR(bp, write_arb_addr[i].ubound, + val | (write_arb_data[i][w_order].ubound << 7)); + } + } + + val = write_arb_data[NUM_WR_Q-1][w_order].add; + val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10; + val += write_arb_data[NUM_WR_Q-1][w_order].l << 17; + REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val); + + val = read_arb_data[NUM_RD_Q-1][r_order].add; + val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10; + val += read_arb_data[NUM_RD_Q-1][r_order].l << 17; + REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val); + + REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order); + REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order); + + if (r_order == MAX_RD_ORD) + REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); + + REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); + + if (CHIP_IS_E1H(bp)) { + val = ((w_order == 0) ? 2 : 3); + REG_WR(bp, PXP2_REG_WR_HC_MPS, val); + REG_WR(bp, PXP2_REG_WR_USDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_QM_MPS, val); + REG_WR(bp, PXP2_REG_WR_TM_MPS, val); + REG_WR(bp, PXP2_REG_WR_SRC_MPS, val); + REG_WR(bp, PXP2_REG_WR_DBG_MPS, val); + REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */ + REG_WR(bp, PXP2_REG_WR_CDU_MPS, val); + } +} + +/***************************************************************************** + * Description: + * Calculates crc 8 on a word value: polynomial 0-1-2-8 + * Code was translated from Verilog. + ****************************************************************************/ +static u8 calc_crc8(u32 data, u8 crc) +{ + u8 D[32]; + u8 NewCRC[8]; + u8 C[8]; + u8 crc_res; + u8 i; + + /* split the data into 31 bits */ + for (i = 0; i < 32; i++) { + D[i] = data & 1; + data = data >> 1; + } + + /* split the crc into 8 bits */ + for (i = 0; i < 8; i++) { + C[i] = crc & 1; + crc = crc >> 1; + } + + NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^ + D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^ + C[6] ^ C[7]; + NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^ + D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^ + D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6]; + NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^ + D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^ + C[0] ^ C[1] ^ C[4] ^ C[5]; + NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^ + D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^ + C[1] ^ C[2] ^ C[5] ^ C[6]; + NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^ + D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^ + C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7]; + NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^ + D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^ + C[3] ^ C[4] ^ C[7]; + NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^ + D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^ + C[5]; + NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^ + D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^ + C[6]; + + crc_res = 0; + for (i = 0; i < 8; i++) + crc_res |= (NewCRC[i] << i); + + return crc_res; +} + +#endif /* BNX2X_INIT_OPS_H */ -- cgit v1.2.3-58-ga151