From cd149eff8d2201a63c074a6d9d03e52926aa535d Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 9 Feb 2022 15:27:04 +0300 Subject: mtd: spi-nor: intel-spi: Disable write protection only if asked Currently the driver tries to disable the BIOS write protection automatically even if this is not what the user wants. For this reason modify the driver so that by default it does not touch the write protection. Only if specifically asked by the user (setting writeable=1 command line parameter) the driver tries to disable the BIOS write protection. Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Reviewed-by: Mauro Lima Reviewed-by: Tudor Ambarus Acked-by: Lee Jones Link: https://lore.kernel.org/r/20220209122706.42439-2-mika.westerberg@linux.intel.com Signed-off-by: Mark Brown --- drivers/mtd/spi-nor/controllers/intel-spi-pci.c | 29 +++++++++++------ drivers/mtd/spi-nor/controllers/intel-spi.c | 41 ++++++++++++------------- 2 files changed, 38 insertions(+), 32 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/spi-nor/controllers/intel-spi-pci.c b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c index 1bc53b8bb88a..508f7ca098ef 100644 --- a/drivers/mtd/spi-nor/controllers/intel-spi-pci.c +++ b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c @@ -16,12 +16,30 @@ #define BCR 0xdc #define BCR_WPD BIT(0) +static bool intel_spi_pci_set_writeable(void __iomem *base, void *data) +{ + struct pci_dev *pdev = data; + u32 bcr; + + /* Try to make the chip read/write */ + pci_read_config_dword(pdev, BCR, &bcr); + if (!(bcr & BCR_WPD)) { + bcr |= BCR_WPD; + pci_write_config_dword(pdev, BCR, bcr); + pci_read_config_dword(pdev, BCR, &bcr); + } + + return bcr & BCR_WPD; +} + static const struct intel_spi_boardinfo bxt_info = { .type = INTEL_SPI_BXT, + .set_writeable = intel_spi_pci_set_writeable, }; static const struct intel_spi_boardinfo cnl_info = { .type = INTEL_SPI_CNL, + .set_writeable = intel_spi_pci_set_writeable, }; static int intel_spi_pci_probe(struct pci_dev *pdev, @@ -29,7 +47,6 @@ static int intel_spi_pci_probe(struct pci_dev *pdev, { struct intel_spi_boardinfo *info; struct intel_spi *ispi; - u32 bcr; int ret; ret = pcim_enable_device(pdev); @@ -41,15 +58,7 @@ static int intel_spi_pci_probe(struct pci_dev *pdev, if (!info) return -ENOMEM; - /* Try to make the chip read/write */ - pci_read_config_dword(pdev, BCR, &bcr); - if (!(bcr & BCR_WPD)) { - bcr |= BCR_WPD; - pci_write_config_dword(pdev, BCR, bcr); - pci_read_config_dword(pdev, BCR, &bcr); - } - info->writeable = !!(bcr & BCR_WPD); - + info->data = pdev; ispi = intel_spi_probe(&pdev->dev, &pdev->resource[0], info); if (IS_ERR(ispi)) return PTR_ERR(ispi); diff --git a/drivers/mtd/spi-nor/controllers/intel-spi.c b/drivers/mtd/spi-nor/controllers/intel-spi.c index a413892ff449..f35597cbea0c 100644 --- a/drivers/mtd/spi-nor/controllers/intel-spi.c +++ b/drivers/mtd/spi-nor/controllers/intel-spi.c @@ -131,7 +131,6 @@ * @sregs: Start of software sequencer registers * @nregions: Maximum number of regions * @pr_num: Maximum number of protected range registers - * @writeable: Is the chip writeable * @locked: Is SPI setting locked * @swseq_reg: Use SW sequencer in register reads/writes * @swseq_erase: Use SW sequencer in erase operation @@ -149,7 +148,6 @@ struct intel_spi { void __iomem *sregs; size_t nregions; size_t pr_num; - bool writeable; bool locked; bool swseq_reg; bool swseq_erase; @@ -304,6 +302,14 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi) INTEL_SPI_TIMEOUT * 1000); } +static bool intel_spi_set_writeable(struct intel_spi *ispi) +{ + if (!ispi->info->set_writeable) + return false; + + return ispi->info->set_writeable(ispi->base, ispi->info->data); +} + static int intel_spi_init(struct intel_spi *ispi) { u32 opmenu0, opmenu1, lvscc, uvscc, val; @@ -316,19 +322,6 @@ static int intel_spi_init(struct intel_spi *ispi) ispi->nregions = BYT_FREG_NUM; ispi->pr_num = BYT_PR_NUM; ispi->swseq_reg = true; - - if (writeable) { - /* Disable write protection */ - val = readl(ispi->base + BYT_BCR); - if (!(val & BYT_BCR_WPD)) { - val |= BYT_BCR_WPD; - writel(val, ispi->base + BYT_BCR); - val = readl(ispi->base + BYT_BCR); - } - - ispi->writeable = !!(val & BYT_BCR_WPD); - } - break; case INTEL_SPI_LPT: @@ -358,6 +351,12 @@ static int intel_spi_init(struct intel_spi *ispi) return -EINVAL; } + /* Try to disable write protection if user asked to do so */ + if (writeable && !intel_spi_set_writeable(ispi)) { + dev_warn(ispi->dev, "can't disable chip write protection\n"); + writeable = false; + } + /* Disable #SMI generation from HW sequencer */ val = readl(ispi->base + HSFSTS_CTL); val &= ~HSFSTS_CTL_FSMIE; @@ -884,9 +883,12 @@ static void intel_spi_fill_partition(struct intel_spi *ispi, /* * If any of the regions have protection bits set, make the * whole partition read-only to be on the safe side. + * + * Also if the user did not ask the chip to be writeable + * mask the bit too. */ - if (intel_spi_is_protected(ispi, base, limit)) - ispi->writeable = false; + if (!writeable || intel_spi_is_protected(ispi, base, limit)) + part->mask_flags |= MTD_WRITEABLE; end = (limit << 12) + 4096; if (end > part->size) @@ -927,7 +929,6 @@ struct intel_spi *intel_spi_probe(struct device *dev, ispi->dev = dev; ispi->info = info; - ispi->writeable = info->writeable; ret = intel_spi_init(ispi); if (ret) @@ -945,10 +946,6 @@ struct intel_spi *intel_spi_probe(struct device *dev, intel_spi_fill_partition(ispi, &part); - /* Prevent writes if not explicitly enabled */ - if (!ispi->writeable || !writeable) - ispi->nor.mtd.flags &= ~MTD_WRITEABLE; - ret = mtd_device_register(&ispi->nor.mtd, &part, 1); if (ret) return ERR_PTR(ret); -- cgit v1.2.3-58-ga151