From 89d1efc1fd0aceef8c668e8172aa470477b2784a Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sat, 29 Sep 2012 11:03:49 +0530 Subject: mtd: onenand: omap: cleanup gpmc dependency requesting, freeing gpmc cs is now handled fully by gpmc, remove left out gpmc dependency as well as unnecessary include of gpmc.h Signed-off-by: Afzal Mohammed --- drivers/mtd/onenand/omap2.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 1961be985171..d7ef2c947daa 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -38,7 +38,6 @@ #include #include -#include #include #include @@ -803,7 +802,6 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) } iounmap(c->onenand.base); release_mem_region(c->phys_base, c->mem_size); - gpmc_cs_free(c->gpmc_cs); kfree(c); return 0; -- cgit v1.2.3-58-ga151 From 48b51d4dda3195320ec95b3393f44bfb060653c1 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sat, 29 Sep 2012 11:14:47 +0530 Subject: mtd: nand: omap: free region as per resource size memory as is now obtained via resource, upon freeing use resource size. This also helps get rid of one macro. Signed-off-by: Afzal Mohammed --- drivers/mtd/nand/omap2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 5b3138620646..4c331356a882 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1513,7 +1513,7 @@ static int omap_nand_remove(struct platform_device *pdev) /* Release NAND device, its internal structures and partitions */ nand_release(&info->mtd); iounmap(info->nand.IO_ADDR_R); - release_mem_region(info->phys_base, NAND_IO_SIZE); + release_mem_region(info->phys_base, info->mem_size); kfree(info); return 0; } -- cgit v1.2.3-58-ga151 From 4ea1e4ba7bec0a3d490a846376140643e4860536 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sat, 29 Sep 2012 11:22:21 +0530 Subject: mtd: nand: omap: read nand using register address Now that gpmc-nand registers are available in driver, use it to read nand data. "65b97cf mtd: nand: omap2: handle nand on gpmc" modified all other instances. After initial versions of that patch, a new change added reading nand data using gpmc exposed function. In the final version this change was not taken care. Signed-off-by: Afzal Mohammed --- drivers/mtd/nand/omap2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 4c331356a882..abfc602c4cfc 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -996,7 +996,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) cond_resched(); } - status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA); + status = readb(info->reg.gpmc_nand_data); return status; } -- cgit v1.2.3-58-ga151 From b7754452b3e27716347a528b47b0a1083af32520 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Fri, 5 Oct 2012 11:43:19 +0530 Subject: mtd: onenand: omap: use pdata info instead of cpu_is platform data now contains a field to indicate whether soc belongs to omap34xx family, use it instead of cpu_is_* check. This helps in removing dependency of platform specific header file - cpu.h Signed-off-by: Afzal Mohammed --- drivers/mtd/onenand/omap2.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index d7ef2c947daa..959f465a0aa1 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -42,7 +42,6 @@ #include #include -#include #define DRIVER_NAME "omap2-onenand" @@ -62,6 +61,7 @@ struct omap2_onenand { int freq; int (*setup)(void __iomem *base, int *freq_ptr); struct regulator *regulator; + u8 flags; }; static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data) @@ -154,7 +154,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state) if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) { syscfg |= ONENAND_SYS_CFG1_IOBE; write_reg(c, syscfg, ONENAND_REG_SYS_CFG1); - if (cpu_is_omap34xx()) + if (c->flags & ONENAND_IN_OMAP34XX) /* Add a delay to let GPIO settle */ syscfg = read_reg(c, ONENAND_REG_SYS_CFG1); } @@ -638,6 +638,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) init_completion(&c->irq_done); init_completion(&c->dma_done); + c->flags = pdata->flags; c->gpmc_cs = pdata->cs; c->gpio_irq = pdata->gpio_irq; c->dma_channel = pdata->dma_channel; @@ -728,7 +729,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) this = &c->onenand; if (c->dma_channel >= 0) { this->wait = omap2_onenand_wait; - if (cpu_is_omap34xx()) { + if (c->flags & ONENAND_IN_OMAP34XX) { this->read_bufferram = omap3_onenand_read_bufferram; this->write_bufferram = omap3_onenand_write_bufferram; } else { -- cgit v1.2.3-58-ga151 From 47f88af4ed80ac9ca593543e21ebf86a31d7e8ba Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sat, 29 Sep 2012 18:20:11 +0530 Subject: mtd: nand: omap: bring in gpmc nand macros Bring onto driver the macros defined in gpmc.h that are not necessary outside driver, helps in removing inclusion of gpmc.h too. Also remove GPMC prefix on those macros to make clear it's independence with gpmc header. Signed-off-by: Afzal Mohammed --- drivers/mtd/nand/omap2.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index abfc602c4cfc..f0a1b1d69d32 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -110,6 +110,11 @@ #define ECC1RESULTSIZE 0x1 #define ECCCLEAR 0x100 #define ECC1 0x1 +#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 +#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) +#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) +#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) +#define STATUS_BUFF_EMPTY 0x00000001 /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; @@ -269,7 +274,7 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len) /* wait until buffer is available for write */ do { status = readl(info->reg.gpmc_status) & - GPMC_STATUS_BUFF_EMPTY; + STATUS_BUFF_EMPTY; } while (!status); } } @@ -307,7 +312,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) /* wait until buffer is available for write */ do { status = readl(info->reg.gpmc_status) & - GPMC_STATUS_BUFF_EMPTY; + STATUS_BUFF_EMPTY; } while (!status); } } @@ -348,7 +353,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) } else { do { r_count = readl(info->reg.gpmc_prefetch_status); - r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count); + r_count = PREFETCH_STATUS_FIFO_CNT(r_count); r_count = r_count >> 2; ioread32_rep(info->nand.IO_ADDR_R, p, r_count); p += r_count; @@ -395,7 +400,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd, } else { while (len) { w_count = readl(info->reg.gpmc_prefetch_status); - w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count); + w_count = PREFETCH_STATUS_FIFO_CNT(w_count); w_count = w_count >> 1; for (i = 0; (i < w_count) && len; i++, len -= 2) iowrite16(*p++, info->nand.IO_ADDR_W); @@ -407,7 +412,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd, do { cpu_relax(); val = readl(info->reg.gpmc_prefetch_status); - val = GPMC_PREFETCH_STATUS_COUNT(val); + val = PREFETCH_STATUS_COUNT(val); } while (val && (tim++ < limit)); /* disable and stop the PFPW engine */ @@ -493,7 +498,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, do { cpu_relax(); val = readl(info->reg.gpmc_prefetch_status); - val = GPMC_PREFETCH_STATUS_COUNT(val); + val = PREFETCH_STATUS_COUNT(val); } while (val && (tim++ < limit)); /* disable and stop the PFPW engine */ @@ -556,7 +561,7 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev) u32 bytes; bytes = readl(info->reg.gpmc_prefetch_status); - bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes); + bytes = PREFETCH_STATUS_FIFO_CNT(bytes); bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */ if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */ if (this_irq == info->gpmc_irq_count) @@ -682,7 +687,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd, limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS)); do { val = readl(info->reg.gpmc_prefetch_status); - val = GPMC_PREFETCH_STATUS_COUNT(val); + val = PREFETCH_STATUS_COUNT(val); cpu_relax(); } while (val && (tim++ < limit)); -- cgit v1.2.3-58-ga151 From 2ef9f3ddec55f1b77615613d4aab418f073220bb Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Thu, 4 Oct 2012 19:03:06 +0530 Subject: mtd: nand: omap: handle gpmc bch[48] gpmc-nand bch registers are now available in driver, make use of it to handle bch[48] instead of relying on gpmc exported functions. And so nand driver no longer needs gpmc header, remove it. Signed-off-by: Afzal Mohammed --- drivers/mtd/nand/omap2.c | 100 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 89 insertions(+), 11 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index f0a1b1d69d32..3282b151aa03 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -28,7 +28,6 @@ #endif #include -#include #include #define DRIVER_NAME "omap2-nand" @@ -106,6 +105,7 @@ #define CS_MASK 0x7 #define ENABLE_PREFETCH (0x1 << 7) #define DMA_MPU_MODE_SHIFT 2 +#define ECCSIZE0_SHIFT 12 #define ECCSIZE1_SHIFT 22 #define ECC1RESULTSIZE 0x1 #define ECCCLEAR 0x100 @@ -1034,19 +1034,45 @@ static int omap_dev_ready(struct mtd_info *mtd) static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) { int nerrors; - unsigned int dev_width; + unsigned int dev_width, nsectors; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); struct nand_chip *chip = mtd->priv; + u32 val; nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4; dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; + nsectors = 1; /* * Program GPMC to perform correction on one 512-byte sector at a time. * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and * gives a slight (5%) performance gain (but requires additional code). */ - (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors); + + writel(ECC1, info->reg.gpmc_ecc_control); + + /* + * When using BCH, sector size is hardcoded to 512 bytes. + * Here we are using wrapping mode 6 both for reading and writing, with: + * size0 = 0 (no additional protected byte in spare area) + * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) + */ + val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT); + writel(val, info->reg.gpmc_ecc_size_config); + + /* BCH configuration */ + val = ((1 << 16) | /* enable BCH */ + (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ + (0x06 << 8) | /* wrap mode = 6 */ + (dev_width << 7) | /* bus width */ + (((nsectors-1) & 0x7) << 4) | /* number of sectors */ + (info->gpmc_cs << 1) | /* ECC CS */ + (0x1)); /* enable ECC */ + + writel(val, info->reg.gpmc_ecc_config); + + /* clear ecc and enable bits */ + writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control); } /** @@ -1060,7 +1086,32 @@ static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat, { struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code); + unsigned long nsectors, val1, val2; + int i; + + nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; + + for (i = 0; i < nsectors; i++) { + + /* Read hw-computed remainder */ + val1 = readl(info->reg.gpmc_bch_result0[i]); + val2 = readl(info->reg.gpmc_bch_result1[i]); + + /* + * Add constant polynomial to remainder, in order to get an ecc + * sequence of 0xFFs for a buffer filled with 0xFFs; and + * left-justify the resulting polynomial. + */ + *ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF); + *ecc_code++ = 0x13 ^ ((val2 >> 4) & 0xFF); + *ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); + *ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF); + *ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF); + *ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF); + *ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4); + } + + return 0; } /** @@ -1074,7 +1125,39 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat, { struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code); + unsigned long nsectors, val1, val2, val3, val4; + int i; + + nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; + + for (i = 0; i < nsectors; i++) { + + /* Read hw-computed remainder */ + val1 = readl(info->reg.gpmc_bch_result0[i]); + val2 = readl(info->reg.gpmc_bch_result1[i]); + val3 = readl(info->reg.gpmc_bch_result2[i]); + val4 = readl(info->reg.gpmc_bch_result3[i]); + + /* + * Add constant polynomial to remainder, in order to get an ecc + * sequence of 0xFFs for a buffer filled with 0xFFs. + */ + *ecc_code++ = 0xef ^ (val4 & 0xFF); + *ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF); + *ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF); + *ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF); + *ecc_code++ = 0xed ^ (val3 & 0xFF); + *ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF); + *ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF); + *ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF); + *ecc_code++ = 0x97 ^ (val2 & 0xFF); + *ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF); + *ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF); + *ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF); + *ecc_code++ = 0xb5 ^ (val1 & 0xFF); + } + + return 0; } /** @@ -1130,7 +1213,7 @@ static void omap3_free_bch(struct mtd_info *mtd) */ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) { - int ret, max_errors; + int max_errors; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); #ifdef CONFIG_MTD_NAND_OMAP_BCH8 @@ -1147,11 +1230,6 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) goto fail; } - /* initialize GPMC BCH engine */ - ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors); - if (ret) - goto fail; - /* software bch library is only used to detect and locate errors */ info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */); if (!info->bch) -- cgit v1.2.3-58-ga151