From 96129a0eaa3f5232f433812972c7bf38004ebf6b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 11 May 2015 13:58:08 +0100 Subject: mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode The low power sleep mode on wm5110 requires that the LDO1 regulator be set to 1.175V prior to entering sleep, then returned to 1.2V after exiting sleep mode. This patch apply these regulator settings. Signed-off-by: Charles Keepax Acked-by: Mark Brown Signed-off-by: Lee Jones --- drivers/mfd/arizona-core.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'drivers/mfd/arizona-core.c') diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index c80ab7910615..93024acc145e 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -478,6 +478,37 @@ static int arizona_runtime_resume(struct device *dev) goto err; } break; + case WM5110: + case WM8280: + ret = arizona_wait_for_boot(arizona); + if (ret) + goto err; + + if (arizona->external_dcvdd) { + ret = regmap_update_bits(arizona->regmap, + ARIZONA_ISOLATION_CONTROL, + ARIZONA_ISOLATE_DCVDD1, 0); + if (ret) { + dev_err(arizona->dev, + "Failed to connect DCVDD: %d\n", ret); + goto err; + } + } else { + /* + * As this is only called for the internal regulator + * (where we know voltage ranges available) it is ok + * to request an exact range. + */ + ret = regulator_set_voltage(arizona->dcvdd, + 1200000, 1200000); + if (ret < 0) { + dev_err(arizona->dev, + "Failed to set resume voltage: %d\n", + ret); + goto err; + } + } + break; default: ret = arizona_wait_for_boot(arizona); if (ret != 0) { @@ -528,6 +559,27 @@ static int arizona_runtime_suspend(struct device *dev) ret); return ret; } + } else { + switch (arizona->type) { + case WM5110: + case WM8280: + /* + * As this is only called for the internal regulator + * (where we know voltage ranges available) it is ok + * to request an exact range. + */ + ret = regulator_set_voltage(arizona->dcvdd, + 1175000, 1175000); + if (ret < 0) { + dev_err(arizona->dev, + "Failed to set suspend voltage: %d\n", + ret); + return ret; + } + break; + default: + break; + } } regcache_cache_only(arizona->regmap, true); -- cgit v1.2.3-58-ga151