From 5ae8f9a3757e4010c7ea9c07c047088fb812335e Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 26 May 2011 15:51:11 -0300
Subject: [media] mceusb: add and use mce_dbg printk macro

Using dev_dbg is more complexity than many users are able to deal with.
Make it easier to get debug spew feedback from them by adding an mce_dbg
printk macro that spews using dev_info when debug=1 is set for the
mceusb module.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 44 +++++++++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 19 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index ad927fcaa020..10ec54b93d26 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -108,6 +108,12 @@ static int debug = 1;
 static int debug;
 #endif
 
+#define mce_dbg(dev, fmt, ...)					\
+	do {							\
+		if (debug)					\
+			dev_info(dev, fmt, ## __VA_ARGS__);	\
+	} while (0)
+
 /* general constants */
 #define SEND_FLAG_IN_PROGRESS	1
 #define SEND_FLAG_COMPLETE	2
@@ -606,7 +612,7 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
 	if (ir) {
 		len = urb->actual_length;
 
-		dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
+		mce_dbg(ir->dev, "callback called (status=%d len=%d)\n",
 			urb->status, len);
 
 		mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
@@ -655,17 +661,17 @@ static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data,
 		return;
 	}
 
-	dev_dbg(dev, "receive request called (size=%#x)\n", size);
+	mce_dbg(dev, "receive request called (size=%#x)\n", size);
 
 	async_urb->transfer_buffer_length = size;
 	async_urb->dev = ir->usbdev;
 
 	res = usb_submit_urb(async_urb, GFP_ATOMIC);
 	if (res) {
-		dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
+		mce_dbg(dev, "receive request FAILED! (res=%d)\n", res);
 		return;
 	}
-	dev_dbg(dev, "receive request complete (res=%d)\n", res);
+	mce_dbg(dev, "receive request complete (res=%d)\n", res);
 }
 
 static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
@@ -794,7 +800,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 			ir->carrier = carrier;
 			cmdbuf[2] = MCE_CMD_SIG_END;
 			cmdbuf[3] = MCE_IRDATA_TRAILER;
-			dev_dbg(ir->dev, "%s: disabling carrier "
+			mce_dbg(ir->dev, "%s: disabling carrier "
 				"modulation\n", __func__);
 			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
 			return carrier;
@@ -806,7 +812,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 				ir->carrier = carrier;
 				cmdbuf[2] = prescaler;
 				cmdbuf[3] = divisor;
-				dev_dbg(ir->dev, "%s: requesting %u HZ "
+				mce_dbg(ir->dev, "%s: requesting %u HZ "
 					"carrier\n", __func__, carrier);
 
 				/* Transmit new carrier to mce device */
@@ -879,7 +885,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
 					 * US_TO_NS(MCE_TIME_UNIT);
 
-			dev_dbg(ir->dev, "Storing %s with duration %d\n",
+			mce_dbg(ir->dev, "Storing %s with duration %d\n",
 				rawir.pulse ? "pulse" : "space",
 				rawir.duration);
 
@@ -911,7 +917,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 		if (ir->parser_state != CMD_HEADER && !ir->rem)
 			ir->parser_state = CMD_HEADER;
 	}
-	dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
+	mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
 	ir_raw_event_handle(ir->rc);
 }
 
@@ -933,7 +939,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
 		ir->send_flags = SEND_FLAG_COMPLETE;
-		dev_dbg(ir->dev, "setup answer received %d bytes\n",
+		mce_dbg(ir->dev, "setup answer received %d bytes\n",
 			buf_len);
 	}
 
@@ -951,7 +957,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	case -EPIPE:
 	default:
-		dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
+		mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
 		break;
 	}
 
@@ -978,8 +984,8 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
 			      data, USB_CTRL_MSG_SZ, HZ * 3);
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
-	dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
+	mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
 		__func__, data[0], data[1]);
 
 	/* set feature: bit rate 38400 bps */
@@ -987,19 +993,19 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
 			      0xc04e, 0x0000, NULL, 0, HZ * 3);
 
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
 
 	/* bRequest 4: set char length to 8 bits */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      4, USB_TYPE_VENDOR,
 			      0x0808, 0x0000, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - retB = %d\n", __func__, ret);
 
 	/* bRequest 2: set handshaking to use DTR/DSR */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      2, USB_TYPE_VENDOR,
 			      0x0000, 0x0100, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - retC = %d\n", __func__, ret);
 
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
@@ -1122,7 +1128,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	bool tx_mask_normal;
 	int ir_intfnum;
 
-	dev_dbg(&intf->dev, "%s called\n", __func__);
+	mce_dbg(&intf->dev, "%s called\n", __func__);
 
 	idesc  = intf->cur_altsetting;
 
@@ -1150,7 +1156,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_in = ep;
 			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_in->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable inbound endpoint "
+			mce_dbg(&intf->dev, "acceptable inbound endpoint "
 				"found\n");
 		}
 
@@ -1165,12 +1171,12 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_out = ep;
 			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_out->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable outbound endpoint "
+			mce_dbg(&intf->dev, "acceptable outbound endpoint "
 				"found\n");
 		}
 	}
 	if (ep_in == NULL) {
-		dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
+		mce_dbg(&intf->dev, "inbound and/or endpoint not found\n");
 		return -ENODEV;
 	}
 
-- 
cgit v1.2.3-58-ga151


From b825fe1b1bb5927402c3d3084641355946ef05f8 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 26 May 2011 16:03:17 -0300
Subject: [media] mceusb: support I-O Data GV-MC7/RCKIT

There's an SMK-device-id remote kit from I-O Data avaiable primarily in
Japan, which appears to have no tx hardware, but has rx functionality
that works with the mceusb driver by simply adding its device ID.

Reported-by: Jeremy Kwok <jeremykwok@desu.ca>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 10ec54b93d26..650b2f479519 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -252,6 +252,9 @@ static struct usb_device_id mceusb_dev_table[] = {
 	  .driver_info = MCE_GEN2_TX_INV },
 	/* SMK eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_SMK, 0x0338) },
+	/* SMK/I-O Data GV-MC7/RCKIT Receiver */
+	{ USB_DEVICE(VENDOR_SMK, 0x0353),
+	  .driver_info = MCE_GEN2_NO_TX },
 	/* Tatung eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
 	/* Shuttle eHome Infrared Transceiver */
-- 
cgit v1.2.3-58-ga151


From 3a918aa69daf001910640cc910ea4053ba840a6e Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 26 May 2011 14:23:18 -0300
Subject: [media] mceusb: mce_sync_in is brain-dead

Aside from the initial "hey, lets make sure we've flushed any
pre-existing data on the device" call to mce_sync_in, every other one of
the calls was entirely superfluous. Ergo, remove them all, and rename
the one and only (questionably) useful one to reflect what it really
does. Verified on both gen2 and gen3 hardware to make zero difference.
Well, except that you no longer get a bunch of urb submit failures from
the unneeded mce_sync_in calls. Oh. And move that flush to a point
*after* we've wired up the inbound urb, or it won't do squat. I have
half a mind to just remove it entirely, but someone thought it was
necessary at some point, and it doesn't seem to hurt, so lets leave it
for the time being.

This excercise took place due to insightful questions asked by Hans
Petter Selasky, about the possible reuse of the inbound urb before it
was actually availble by mce_sync_in, so thanks to him for motivating
this cleanup.

Reported-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 30 +++++++-----------------------
 1 file changed, 7 insertions(+), 23 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 650b2f479519..6cf22012079a 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -682,9 +682,9 @@ static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
 	mce_request_packet(ir, data, size, MCEUSB_TX);
 }
 
-static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
+static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
 {
-	mce_request_packet(ir, data, size, MCEUSB_RX);
+	mce_request_packet(ir, NULL, size, MCEUSB_RX);
 }
 
 /* Send data out the IR blaster port(s) */
@@ -970,7 +970,6 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 static void mceusb_gen1_init(struct mceusb_dev *ir)
 {
 	int ret;
-	int maxp = ir->len_in;
 	struct device *dev = ir->dev;
 	char *data;
 
@@ -1012,55 +1011,40 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get hw/sw revision? */
 	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
 
 	kfree(data);
 };
 
 static void mceusb_gen2_init(struct mceusb_dev *ir)
 {
-	int maxp = ir->len_in;
-
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get hw/sw revision? */
 	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* unknown what the next two actually return... */
 	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
-	mce_sync_in(ir, NULL, maxp);
 	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
-	mce_sync_in(ir, NULL, maxp);
 }
 
 static void mceusb_get_parameters(struct mceusb_dev *ir)
 {
-	int maxp = ir->len_in;
-
 	/* get the carrier and frequency */
 	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
-	mce_sync_in(ir, NULL, maxp);
 
-	if (!ir->flags.no_tx) {
+	if (!ir->flags.no_tx)
 		/* get the transmitter bitmask */
 		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
-		mce_sync_in(ir, NULL, maxp);
-	}
 
 	/* get receiver timeout value */
 	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get receiver sensor setting */
 	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
-	mce_sync_in(ir, NULL, maxp);
 }
 
 static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
@@ -1224,16 +1208,16 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	if (!ir->rc)
 		goto rc_dev_fail;
 
-	/* flush buffers on the device */
-	mce_sync_in(ir, NULL, maxp);
-	mce_sync_in(ir, NULL, maxp);
-
 	/* wire up inbound data handler */
 	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
 		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
 	ir->urb_in->transfer_dma = ir->dma_in;
 	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
+	/* flush buffers on the device */
+	mce_dbg(&intf->dev, "Flushing receive buffers\n");
+	mce_flush_rx_buffer(ir, maxp);
+
 	/* initialize device */
 	if (ir->flags.microsoft_gen1)
 		mceusb_gen1_init(ir);
-- 
cgit v1.2.3-58-ga151


From 8de111e27688798623b9e9062235bb0cac29f599 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Fri, 27 May 2011 16:56:50 -0300
Subject: [media] lirc_dev: store cdev in irctl, up maxdevs

Store the cdev pointer in struct irctl, allocated dynamically as needed,
rather than having a static array. At the same time, recycle some of the
saved memory to nudge the maximum number of lirc devices supported up a
ways -- its not that uncommon these days, now that we have the rc-core
lirc bridge driver, to see a system with at least 4 raw IR receivers.
(consider a mythtv backend with several video capture devices and the
possible need for IR transmit hardware).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/lirc_dev.c | 37 +++++++++++++++++++++++++++----------
 include/media/lirc_dev.h    |  2 +-
 2 files changed, 28 insertions(+), 11 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index fd237ab120bb..27997a9ceb0d 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -55,6 +55,8 @@ struct irctl {
 	struct lirc_buffer *buf;
 	unsigned int chunk_size;
 
+	struct cdev *cdev;
+
 	struct task_struct *task;
 	long jiffies_to_wait;
 };
@@ -62,7 +64,6 @@ struct irctl {
 static DEFINE_MUTEX(lirc_dev_lock);
 
 static struct irctl *irctls[MAX_IRCTL_DEVICES];
-static struct cdev cdevs[MAX_IRCTL_DEVICES];
 
 /* Only used for sysfs but defined to void otherwise */
 static struct class *lirc_class;
@@ -167,9 +168,13 @@ static struct file_operations lirc_dev_fops = {
 
 static int lirc_cdev_add(struct irctl *ir)
 {
-	int retval;
+	int retval = -ENOMEM;
 	struct lirc_driver *d = &ir->d;
-	struct cdev *cdev = &cdevs[d->minor];
+	struct cdev *cdev;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		goto err_out;
 
 	if (d->fops) {
 		cdev_init(cdev, d->fops);
@@ -180,12 +185,20 @@ static int lirc_cdev_add(struct irctl *ir)
 	}
 	retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
 	if (retval)
-		return retval;
+		goto err_out;
 
 	retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
-	if (retval)
+	if (retval) {
 		kobject_put(&cdev->kobj);
+		goto err_out;
+	}
+
+	ir->cdev = cdev;
+
+	return 0;
 
+err_out:
+	kfree(cdev);
 	return retval;
 }
 
@@ -214,7 +227,7 @@ int lirc_register_driver(struct lirc_driver *d)
 	if (MAX_IRCTL_DEVICES <= d->minor) {
 		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
 			"\"minor\" must be between 0 and %d (%d)!\n",
-			MAX_IRCTL_DEVICES-1, d->minor);
+			MAX_IRCTL_DEVICES - 1, d->minor);
 		err = -EBADRQC;
 		goto out;
 	}
@@ -369,7 +382,7 @@ int lirc_unregister_driver(int minor)
 
 	if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
 		printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
-		       "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1);
+		       "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES - 1);
 		return -EBADRQC;
 	}
 
@@ -380,7 +393,7 @@ int lirc_unregister_driver(int minor)
 		return -ENOENT;
 	}
 
-	cdev = &cdevs[minor];
+	cdev = ir->cdev;
 
 	mutex_lock(&lirc_dev_lock);
 
@@ -410,6 +423,7 @@ int lirc_unregister_driver(int minor)
 	} else {
 		lirc_irctl_cleanup(ir);
 		cdev_del(cdev);
+		kfree(cdev);
 		kfree(ir);
 		irctls[minor] = NULL;
 	}
@@ -453,7 +467,7 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
 		goto error;
 	}
 
-	cdev = &cdevs[iminor(inode)];
+	cdev = ir->cdev;
 	if (try_module_get(cdev->owner)) {
 		ir->open++;
 		retval = ir->d.set_use_inc(ir->d.data);
@@ -484,13 +498,15 @@ EXPORT_SYMBOL(lirc_dev_fop_open);
 int lirc_dev_fop_close(struct inode *inode, struct file *file)
 {
 	struct irctl *ir = irctls[iminor(inode)];
-	struct cdev *cdev = &cdevs[iminor(inode)];
+	struct cdev *cdev;
 
 	if (!ir) {
 		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
 		return -EINVAL;
 	}
 
+	cdev = ir->cdev;
+
 	dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
 
 	WARN_ON(mutex_lock_killable(&lirc_dev_lock));
@@ -503,6 +519,7 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file)
 		lirc_irctl_cleanup(ir);
 		cdev_del(cdev);
 		irctls[ir->d.minor] = NULL;
+		kfree(cdev);
 		kfree(ir);
 	}
 
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 630e702c9511..168dd0b1bae2 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -9,7 +9,7 @@
 #ifndef _LINUX_LIRC_DEV_H
 #define _LINUX_LIRC_DEV_H
 
-#define MAX_IRCTL_DEVICES 4
+#define MAX_IRCTL_DEVICES 8
 #define BUFLEN            16
 
 #define mod(n, div) ((n) % (div))
-- 
cgit v1.2.3-58-ga151


From 0ae90252d0b28265bc16cf272e72d62281f7baf1 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Fri, 27 May 2011 17:14:51 -0300
Subject: [media] fintek-cir: make suspend with active IR more reliable

There was a missing lock in fintek_suspend. Without the lock, its
possible the system will be in the middle of receiving IR (draining the
RX buffer) when we try to disable CIR interrupts.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/fintek-cir.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c
index 8fa539dde1b4..7f7079b12f23 100644
--- a/drivers/media/rc/fintek-cir.c
+++ b/drivers/media/rc/fintek-cir.c
@@ -597,12 +597,17 @@ static void __devexit fintek_remove(struct pnp_dev *pdev)
 static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
 {
 	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	unsigned long flags;
 
 	fit_dbg("%s called", __func__);
 
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+
 	/* disable all CIR interrupts */
 	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
 
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
 	fintek_config_mode_enable(fintek);
 
 	/* disable cir logical dev */
-- 
cgit v1.2.3-58-ga151


From 589e116062d8b5fd1809dfff4c9b7694ce6c2318 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 24 May 2011 14:19:23 -0300
Subject: [media] nuvoton-cir: in_use isn't actually in use, remove it

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/nuvoton-cir.c | 2 --
 drivers/media/rc/nuvoton-cir.h | 1 -
 2 files changed, 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index bf3060ea6107..565f24c20d77 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -991,7 +991,6 @@ static int nvt_open(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = true;
 	nvt_enable_cir(nvt);
 	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
 
@@ -1004,7 +1003,6 @@ static void nvt_close(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = false;
 	nvt_disable_cir(nvt);
 	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
 }
diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
index 379795d61ea7..1241fc89a36c 100644
--- a/drivers/media/rc/nuvoton-cir.h
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -70,7 +70,6 @@ struct nvt_dev {
 	struct ir_raw_event rawir;
 
 	spinlock_t nvt_lock;
-	bool in_use;
 
 	/* for rx */
 	u8 buf[RX_BUF_LEN];
-- 
cgit v1.2.3-58-ga151


From 0b43fcdff6495958c39e3575848edef4b685ddef Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 24 May 2011 16:44:54 -0300
Subject: [media] mceusb: plug memory leak on data transmit

Hans Petter Selasky pointed out to me that we're leaking urbs when
mce_async_out is called. Its used both for configuring the hardware and
for transmitting IR data. In the tx case, mce_request_packet actually
allocates both a urb and the transfer buffer, neither of which was being
torn down. Do that in the tx callback.

CC: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 6cf22012079a..06dfe0957b5e 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -621,6 +621,9 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
 		mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
 	}
 
+	/* the transfer buffer and urb were allocated in mce_request_packet */
+	kfree(urb->transfer_buffer);
+	usb_free_urb(urb);
 }
 
 /* request incoming or send outgoing usb packet - used to initialize remote */
-- 
cgit v1.2.3-58-ga151


From 443b391900469f2c5ec5a354ce305000096a94b7 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Sat, 4 Jun 2011 14:00:54 -0300
Subject: [media] imon: support for 0x46 0xffdc imon vfd

Courtesy of information from Andreas Dick on the lirc list.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/imon.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 3f3c70716268..43344fd67130 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -307,6 +307,14 @@ static const struct {
 	/* 0xffdc iMON MCE VFD */
 	{ 0x00010000ffffffeell, KEY_VOLUMEUP },
 	{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
+	{ 0x00000001ffffffeell, KEY_MUTE },
+	{ 0x0000000fffffffeell, KEY_MEDIA },
+	{ 0x00000012ffffffeell, KEY_UP },
+	{ 0x00000013ffffffeell, KEY_DOWN },
+	{ 0x00000014ffffffeell, KEY_LEFT },
+	{ 0x00000015ffffffeell, KEY_RIGHT },
+	{ 0x00000016ffffffeell, KEY_ENTER },
+	{ 0x00000017ffffffeell, KEY_ESC },
 	/* iMON Knob values */
 	{ 0x000100ffffffffeell, KEY_VOLUMEUP },
 	{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
@@ -1740,6 +1748,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
 		break;
 	/* iMON VFD, MCE IR */
+	case 0x46:
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-- 
cgit v1.2.3-58-ga151


From 94215ccd99eb6e3c8a035c06984630bd7479d963 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Sat, 4 Jun 2011 14:14:41 -0300
Subject: [media] imon: fix initial panel key repeat suppression

As pointed out on the lirc list by Andreas Dick, initial panel key
repeat suppression wasn't working, as we had no timevals accumulated
until after the first repeat. Also add a missing locking call.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/imon.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 43344fd67130..7136582a8573 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1590,16 +1590,16 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	/* Only panel type events left to process now */
 	spin_lock_irqsave(&ictx->kc_lock, flags);
 
+	do_gettimeofday(&t);
 	/* KEY_MUTE repeats from knob need to be suppressed */
 	if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
-		do_gettimeofday(&t);
 		msec = tv2int(&t, &prev_time);
-		prev_time = t;
 		if (msec < ictx->idev->rep[REP_DELAY]) {
 			spin_unlock_irqrestore(&ictx->kc_lock, flags);
 			return;
 		}
 	}
+	prev_time = t;
 	kc = ictx->kc;
 
 	spin_unlock_irqrestore(&ictx->kc_lock, flags);
@@ -1611,7 +1611,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	input_report_key(ictx->idev, kc, 0);
 	input_sync(ictx->idev);
 
+	spin_lock_irqsave(&ictx->kc_lock, flags);
 	ictx->last_keycode = kc;
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
 
 	return;
 
-- 
cgit v1.2.3-58-ga151


From cfd77310a93aac6de7077335b2b73c19531043e4 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Thu, 2 Jun 2011 06:18:34 -0300
Subject: [media] s5p-fimc: Fix possible memory leak during capture devnode
 registration

Add missing kfree on the error path.

Reported-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-capture.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index d142b40ea64e..7e66455be0da 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -903,6 +903,7 @@ err_vd_reg:
 err_v4l2_reg:
 	v4l2_device_unregister(v4l2_dev);
 err_info:
+	kfree(ctx);
 	dev_err(&fimc->pdev->dev, "failed to install\n");
 	return ret;
 }
-- 
cgit v1.2.3-58-ga151


From 6ba8d13b0cff80ea6da18563fc2aa2cde2771be4 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Wed, 18 May 2011 14:14:56 -0300
Subject: [media] s5p-fimc: Fix V4L2_PIX_FMT_RGB565X description

Remove V4L2_MBUS_FMT_RGB565_2X8_BE media code entry as
camera interface supports only packed YUYV formats.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index dc91a8511af6..f1c7119c0977 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -42,7 +42,6 @@ static struct fimc_fmt fimc_formats[] = {
 		.color		= S5P_FIMC_RGB565,
 		.memplanes	= 1,
 		.colplanes	= 1,
-		.mbus_code	= V4L2_MBUS_FMT_RGB565_2X8_BE,
 		.flags		= FMT_FLAGS_M2M,
 	}, {
 		.name		= "BGR666",
-- 
cgit v1.2.3-58-ga151


From 3495dcefeb3b5ab825788206d5b696be14f4de19 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Fri, 20 May 2011 06:14:59 -0300
Subject: [media] s5p-fimc: Fix data structures documentation and cleanup debug
 trace

Correct inconsistencies in data structures' documentation.
Remove meaningless debug traces.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-capture.c |  9 ---------
 drivers/media/video/s5p-fimc/fimc-core.c    |  6 ------
 drivers/media/video/s5p-fimc/fimc-core.h    | 25 ++++++++++++-------------
 3 files changed, 12 insertions(+), 28 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 7e66455be0da..44fc26f5b05a 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -262,12 +262,7 @@ static unsigned int get_plane_size(struct fimc_frame *fr, unsigned int plane)
 {
 	if (!fr || plane >= fr->fmt->memplanes)
 		return 0;
-
-	dbg("%s: w: %d. h: %d. depth[%d]: %d",
-	    __func__, fr->width, fr->height, plane, fr->fmt->depth[plane]);
-
 	return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8;
-
 }
 
 static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
@@ -283,12 +278,8 @@ static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 
 	*num_planes = fmt->memplanes;
 
-	dbg("%s, buffer count=%d, plane count=%d",
-	    __func__, *num_buffers, *num_planes);
-
 	for (i = 0; i < fmt->memplanes; i++) {
 		sizes[i] = get_plane_size(&ctx->d_frame, i);
-		dbg("plane: %u, plane_size: %lu", i, sizes[i]);
 		allocators[i] = ctx->fimc_dev->alloc_ctx;
 	}
 
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index f1c7119c0977..c427edd3cd5e 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -231,11 +231,7 @@ static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift)
 			return 0;
 		}
 	}
-
 	*shift = 0, *ratio = 1;
-
-	dbg("s: %d, t: %d, shift: %d, ratio: %d",
-	    src, tar, *shift, *ratio);
 	return 0;
 }
 
@@ -267,10 +263,8 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx)
 		err("invalid source size: %d x %d", sx, sy);
 		return -EINVAL;
 	}
-
 	sc->real_width = sx;
 	sc->real_height = sy;
-	dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty);
 
 	ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor);
 	if (ret)
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index 3beb1e5320ce..8f0f168a9ac3 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -135,9 +135,10 @@ enum fimc_color_fmt {
  * @name: format description
  * @fourcc: the fourcc code for this format, 0 if not applicable
  * @color: the corresponding fimc_color_fmt
- * @depth: per plane driver's private 'number of bits per pixel'
  * @memplanes: number of physically non-contiguous data planes
  * @colplanes: number of physically contiguous data planes
+ * @depth: per plane driver's private 'number of bits per pixel'
+ * @flags: flags indicating which operation mode format applies to
  */
 struct fimc_fmt {
 	enum v4l2_mbus_pixelcode mbus_code;
@@ -171,7 +172,7 @@ struct fimc_dma_offset {
 };
 
 /**
- * struct fimc_effect - the configuration data for the "Arbitrary" image effect
+ * struct fimc_effect - color effect information
  * @type:	effect type
  * @pat_cb:	cr value when type is "arbitrary"
  * @pat_cr:	cr value when type is "arbitrary"
@@ -184,7 +185,6 @@ struct fimc_effect {
 
 /**
  * struct fimc_scaler - the configuration data for FIMC inetrnal scaler
- *
  * @scaleup_h:		flag indicating scaling up horizontally
  * @scaleup_v:		flag indicating scaling up vertically
  * @copy_mode:		flag indicating transparent DMA transfer (no scaling
@@ -220,7 +220,6 @@ struct fimc_scaler {
 
 /**
  * struct fimc_addr - the FIMC physical address set for DMA
- *
  * @y:	 luminance plane physical address
  * @cb:	 Cb plane physical address
  * @cr:	 Cr plane physical address
@@ -234,6 +233,7 @@ struct fimc_addr {
 /**
  * struct fimc_vid_buffer - the driver's video buffer
  * @vb:    v4l videobuf buffer
+ * @list:  linked list structure for buffer queue
  * @paddr: precalculated physical address set
  * @index: buffer index for the output DMA engine
  */
@@ -254,11 +254,10 @@ struct fimc_vid_buffer {
  * @offs_v:	image vertical pixel offset
  * @width:	image pixel width
  * @height:	image pixel weight
- * @paddr:	image frame buffer physical addresses
- * @buf_cnt:	number of buffers depending on a color format
  * @payload:	image size in bytes (w x h x bpp)
- * @color:	color format
+ * @paddr:	image frame buffer physical addresses
  * @dma_offset:	DMA offset in bytes
+ * @fmt:	fimc color format pointer
  */
 struct fimc_frame {
 	u32	f_width;
@@ -390,21 +389,22 @@ struct fimc_ctx;
 
 /**
  * struct fimc_dev - abstraction for FIMC entity
- *
  * @slock:	the spinlock protecting this data structure
  * @lock:	the mutex protecting this data structure
  * @pdev:	pointer to the FIMC platform device
  * @pdata:	pointer to the device platform data
+ * @variant:	the IP variant information
  * @id:		FIMC device index (0..FIMC_MAX_DEVS)
  * @num_clocks: the number of clocks managed by this device instance
- * @clock[]:	the clocks required for FIMC operation
+ * @clock:	clocks required for FIMC operation
  * @regs:	the mapped hardware registers
  * @regs_res:	the resource claimed for IO registers
- * @irq:	interrupt number of the FIMC subdevice
- * @irq_queue:
+ * @irq:	FIMC interrupt number
+ * @irq_queue:	interrupt handler waitqueue
  * @m2m:	memory-to-memory V4L2 device information
  * @vid_cap:	camera capture device information
  * @state:	flags used to synchronize m2m and capture mode operation
+ * @alloc_ctx:	videobuf2 memory allocator context
  */
 struct fimc_dev {
 	spinlock_t			slock;
@@ -427,8 +427,7 @@ struct fimc_dev {
 
 /**
  * fimc_ctx - the device context data
- *
- * @lock:		mutex protecting this data structure
+ * @slock:		spinlock protecting this data structure
  * @s_frame:		source frame properties
  * @d_frame:		destination frame properties
  * @out_order_1p:	output 1-plane YCBCR order
-- 
cgit v1.2.3-58-ga151


From a629f86b4aa1669ddf2afaa3ded66d5a59d60b77 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Mon, 23 May 2011 09:15:05 -0300
Subject: [media] s5p-fimc: Fix wrong buffer size in queue_setup

Avoid dereferencing of NULL f->fmt. Correct size of the allocated
buffer in case the crop rectangle is smaller than the bounds
rectangle (configured with S_FMT). Also remove redundant check
for *num_buffer == 0 as this case is handled in videobuf2.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-core.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index c427edd3cd5e..85b47a328a5d 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -704,22 +704,18 @@ static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 	f = ctx_get_frame(ctx, vq->type);
 	if (IS_ERR(f))
 		return PTR_ERR(f);
-
 	/*
 	 * Return number of non-contigous planes (plane buffers)
 	 * depending on the configured color format.
 	 */
-	if (f->fmt)
-		*num_planes = f->fmt->memplanes;
+	if (!f->fmt)
+		return -EINVAL;
 
+	*num_planes = f->fmt->memplanes;
 	for (i = 0; i < f->fmt->memplanes; i++) {
-		sizes[i] = (f->width * f->height * f->fmt->depth[i]) >> 3;
+		sizes[i] = (f->f_width * f->f_height * f->fmt->depth[i]) / 8;
 		allocators[i] = ctx->fimc_dev->alloc_ctx;
 	}
-
-	if (*num_buffers == 0)
-		*num_buffers = 1;
-
 	return 0;
 }
 
-- 
cgit v1.2.3-58-ga151


From dbdd0dfb89ca45895f2063db8b31085cf32aa81d Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Mon, 23 May 2011 09:15:17 -0300
Subject: [media] s5p-fimc: Remove empty buf_init operation

The buf_init buffer queue operation is optional and
buffer_init() does nothing, remove it.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-capture.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 44fc26f5b05a..69016436fffc 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -286,12 +286,6 @@ static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 	return 0;
 }
 
-static int buffer_init(struct vb2_buffer *vb)
-{
-	/* TODO: */
-	return 0;
-}
-
 static int buffer_prepare(struct vb2_buffer *vb)
 {
 	struct vb2_queue *vq = vb->vb2_queue;
@@ -371,7 +365,6 @@ static struct vb2_ops fimc_capture_qops = {
 	.queue_setup		= queue_setup,
 	.buf_prepare		= buffer_prepare,
 	.buf_queue		= buffer_queue,
-	.buf_init		= buffer_init,
 	.wait_prepare		= fimc_unlock,
 	.wait_finish		= fimc_lock,
 	.start_streaming	= start_streaming,
-- 
cgit v1.2.3-58-ga151


From ba0545e328390b9e5589c14876b3940fbe647d0c Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Fri, 20 May 2011 14:02:11 -0300
Subject: [media] s5p-fimc: Use pix_mp for the color format lookup

With multi-planar formats fmt.pix_mp member of struct v4l2_format
should be used rather than fmt.pix. Fix find_fmt() function to do
the right thing.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 85b47a328a5d..873a879dc770 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -841,7 +841,7 @@ struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask)
 
 	for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
 		fmt = &fimc_formats[i];
-		if (fmt->fourcc == f->fmt.pix.pixelformat &&
+		if (fmt->fourcc == f->fmt.pix_mp.pixelformat &&
 		   (fmt->flags & mask))
 			break;
 	}
-- 
cgit v1.2.3-58-ga151


From 3a3f94497aa236d9a4f47f0f4f8dc84e531ffa22 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Thu, 28 Apr 2011 09:06:19 -0300
Subject: [media] s5p-fimc: Update copyright notices

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-capture.c | 4 ++--
 drivers/media/video/s5p-fimc/fimc-core.c    | 7 +++----
 drivers/media/video/s5p-fimc/fimc-core.h    | 4 +---
 3 files changed, 6 insertions(+), 9 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 69016436fffc..81b4a826ee5e 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -1,7 +1,7 @@
 /*
- * Samsung S5P SoC series camera interface (camera capture) driver
+ * Samsung S5P/EXYNOS4 SoC series camera interface (camera capture) driver
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
  * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 873a879dc770..bdf19ada9172 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -1,9 +1,8 @@
 /*
- * S5P camera interface (video postprocessor) driver
+ * Samsung S5P/EXYNOS4 SoC series camera interface (video postprocessor) driver
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
- *
- * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index 8f0f168a9ac3..1f70772daaf0 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -1,7 +1,5 @@
 /*
- * Copyright (c) 2010 Samsung Electronics
- *
- * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
-- 
cgit v1.2.3-58-ga151


From bbe66edc607425acc47d7ad69ba7ad7193ec05b4 Mon Sep 17 00:00:00 2001
From: "HeungJun, Kim" <riverful.kim@samsung.com>
Date: Tue, 31 May 2011 02:27:53 -0300
Subject: [media] m5mols: Fix capture image size register definition

The main capture and the thumbnail image size registers were
erroneously defined to have 1 byte width, resulting in wrong
reported image size. Fix this by changing the registers width
to correct value.

Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/m5mols/m5mols_reg.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h
index b83e36fc6ac6..8260f5030c7e 100644
--- a/drivers/media/video/m5mols/m5mols_reg.h
+++ b/drivers/media/video/m5mols/m5mols_reg.h
@@ -382,8 +382,8 @@
 #define REG_CAP_START_MAIN	0x01
 #define REG_CAP_START_THUMB	0x03
 
-#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1)
-#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1)
+#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4)
+#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4)
 
 /*
  * Category F - Flash
-- 
cgit v1.2.3-58-ga151


From 57644f56234a154afffd0f4d53becf8ff4a55b41 Mon Sep 17 00:00:00 2001
From: "HeungJun, Kim" <riverful.kim@samsung.com>
Date: Tue, 31 May 2011 03:44:19 -0300
Subject: [media] m5mols: add m5mols_read_u8/u16/u32() according to I2C byte
 width

For now, the m5mols_read() share in case of I2C packet 1, 2, 4 byte(s) width.
So, this commit adds 3 functions - m5mols_read_u8/u16/u32() according to byte
width of I2C packet. And, the u32 variables in spite of u8 or u16 for fitting
to m5mols_read() having no choice, is replaced to have original byte width
like u8, u16, u32 as same reason.

Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/m5mols/m5mols.h          | 52 +++++++--------
 drivers/media/video/m5mols/m5mols_capture.c  | 18 +++---
 drivers/media/video/m5mols/m5mols_controls.c |  2 +-
 drivers/media/video/m5mols/m5mols_core.c     | 96 +++++++++++++++++++---------
 4 files changed, 104 insertions(+), 64 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
index 10b55c854487..dbe8928855de 100644
--- a/drivers/media/video/m5mols/m5mols.h
+++ b/drivers/media/video/m5mols/m5mols.h
@@ -106,23 +106,23 @@ struct m5mols_capture {
  * The each value according to each scenemode is recommended in the documents.
  */
 struct m5mols_scenemode {
-	u32 metering;
-	u32 ev_bias;
-	u32 wb_mode;
-	u32 wb_preset;
-	u32 chroma_en;
-	u32 chroma_lvl;
-	u32 edge_en;
-	u32 edge_lvl;
-	u32 af_range;
-	u32 fd_mode;
-	u32 mcc;
-	u32 light;
-	u32 flash;
-	u32 tone;
-	u32 iso;
-	u32 capt_mode;
-	u32 wdr;
+	u8 metering;
+	u8 ev_bias;
+	u8 wb_mode;
+	u8 wb_preset;
+	u8 chroma_en;
+	u8 chroma_lvl;
+	u8 edge_en;
+	u8 edge_lvl;
+	u8 af_range;
+	u8 fd_mode;
+	u8 mcc;
+	u8 light;
+	u8 flash;
+	u8 tone;
+	u8 iso;
+	u8 capt_mode;
+	u8 wdr;
 };
 
 /**
@@ -216,9 +216,9 @@ struct m5mols_info {
 	bool lock_ae;
 	bool lock_awb;
 	u8 resolution;
-	u32 interrupt;
-	u32 mode;
-	u32 mode_save;
+	u8 interrupt;
+	u8 mode;
+	u8 mode_save;
 	int (*set_power)(struct device *dev, int on);
 };
 
@@ -256,9 +256,11 @@ struct m5mols_info {
  *   +-------+---+----------+-----+------+------+------+------+
  *   - d[0..3]: according to size1
  */
-int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val);
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val);
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
 int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 value);
 
 /*
  * Mode operation of the M-5MOLS
@@ -280,12 +282,12 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
  * The available executing order between each modes are as follows:
  *   PARAMETER <---> MONITOR <---> CAPTURE
  */
-int m5mols_mode(struct m5mols_info *info, u32 mode);
+int m5mols_mode(struct m5mols_info *info, u8 mode);
 
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg);
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg);
 int m5mols_sync_controls(struct m5mols_info *info);
 int m5mols_start_capture(struct m5mols_info *info);
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode);
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode);
 int m5mols_lock_3a(struct m5mols_info *info, bool lock);
 int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
 
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
index d71a3903b60f..751f4593da9b 100644
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ b/drivers/media/video/m5mols/m5mols_capture.c
@@ -58,9 +58,9 @@ static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
 {
 	u32 num, den;
 
-	int ret = m5mols_read(sd, addr_num, &num);
+	int ret = m5mols_read_u32(sd, addr_num, &num);
 	if (!ret)
-		ret = m5mols_read(sd, addr_den, &den);
+		ret = m5mols_read_u32(sd, addr_den, &den);
 	if (ret)
 		return ret;
 	*val = den == 0 ? 0 : num / den;
@@ -99,20 +99,20 @@ static int m5mols_capture_info(struct m5mols_info *info)
 	if (ret)
 		return ret;
 
-	ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed);
+	ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash);
+		ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr);
+		ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval);
+		ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
 	if (ret)
 		return ret;
 
 	if (!ret)
-		ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main);
+		ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
 	if (!ret)
-		ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
+		ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
 	if (!ret)
 		info->cap.total = info->cap.main + info->cap.thumb;
 
@@ -122,7 +122,7 @@ static int m5mols_capture_info(struct m5mols_info *info)
 int m5mols_start_capture(struct m5mols_info *info)
 {
 	struct v4l2_subdev *sd = &info->sd;
-	u32 resolution = info->resolution;
+	u8 resolution = info->resolution;
 	int timeout;
 	int ret;
 
diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c
index 817c16fec368..d392c83fbf05 100644
--- a/drivers/media/video/m5mols/m5mols_controls.c
+++ b/drivers/media/video/m5mols/m5mols_controls.c
@@ -130,7 +130,7 @@ static struct m5mols_scenemode m5mols_default_scenemode[] = {
  *
  * WARNING: The execution order is important. Do not change the order.
  */
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode)
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode];
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 76eac26e84ae..2b1f23f8d063 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -133,13 +133,13 @@ static u32 m5mols_swap_byte(u8 *data, u8 length)
 /**
  * m5mols_read -  I2C read function
  * @reg: combination of size, category and command for the I2C packet
+ * @size: desired size of I2C packet
  * @val: read value
  */
-int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
+static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
-	u8 size = I2C_SIZE(reg);
 	u8 category = I2C_CATEGORY(reg);
 	u8 cmd = I2C_COMMAND(reg);
 	struct i2c_msg msg[2];
@@ -149,11 +149,6 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
 	if (!client->adapter)
 		return -ENODEV;
 
-	if (size != 1 && size != 2 && size != 4) {
-		v4l2_err(sd, "Wrong data size\n");
-		return -EINVAL;
-	}
-
 	msg[0].addr = client->addr;
 	msg[0].flags = 0;
 	msg[0].len = 5;
@@ -184,6 +179,52 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
 	return 0;
 }
 
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val)
+{
+	u32 val_32;
+	int ret;
+
+	if (I2C_SIZE(reg) != 1) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+	if (ret)
+		return ret;
+
+	*val = (u8)val_32;
+	return ret;
+}
+
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val)
+{
+	u32 val_32;
+	int ret;
+
+	if (I2C_SIZE(reg) != 2) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+	if (ret)
+		return ret;
+
+	*val = (u16)val_32;
+	return ret;
+}
+
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val)
+{
+	if (I2C_SIZE(reg) != 4) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	return m5mols_read(sd, I2C_SIZE(reg), reg, val);
+}
+
 /**
  * m5mols_write - I2C command write function
  * @reg: combination of size, category and command for the I2C packet
@@ -231,13 +272,14 @@ int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
 	return 0;
 }
 
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 mask)
 {
-	u32 busy, i;
+	u8 busy;
+	int i;
 	int ret;
 
 	for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) {
-		ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy);
+		ret = m5mols_read_u8(sd, I2C_REG(category, cmd, 1), &busy);
 		if (ret < 0)
 			return ret;
 		if ((busy & mask) == mask)
@@ -252,14 +294,14 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
  * Before writing desired interrupt value the INT_FACTOR register should
  * be read to clear pending interrupts.
  */
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg)
 {
 	struct m5mols_info *info = to_m5mols(sd);
-	u32 mask = is_available_af(info) ? REG_INT_AF : 0;
-	u32 dummy;
+	u8 mask = is_available_af(info) ? REG_INT_AF : 0;
+	u8 dummy;
 	int ret;
 
-	ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy);
+	ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy);
 	if (!ret)
 		ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
 	return ret;
@@ -271,7 +313,7 @@ int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
  * It always accompanies a little delay changing the M-5MOLS mode, so it is
  * needed checking current busy status to guarantee right mode.
  */
-static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
+static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode)
 {
 	int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode);
 
@@ -286,16 +328,16 @@ static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
  * can be guaranteed only when the sensor is operating in mode which which
  * a command belongs to.
  */
-int m5mols_mode(struct m5mols_info *info, u32 mode)
+int m5mols_mode(struct m5mols_info *info, u8 mode)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	int ret = -EINVAL;
-	u32 reg;
+	u8 reg;
 
 	if (mode < REG_PARAMETER && mode > REG_CAPTURE)
 		return ret;
 
-	ret = m5mols_read(sd, SYSTEM_SYSMODE, &reg);
+	ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, &reg);
 	if ((!ret && reg == mode) || ret)
 		return ret;
 
@@ -348,28 +390,24 @@ static int m5mols_get_version(struct v4l2_subdev *sd)
 		struct m5mols_version ver;
 		u8 bytes[VERSION_SIZE];
 	} version;
-	u32 *value;
 	u8 cmd = CAT0_VER_CUSTOMER;
 	int ret;
 
 	do {
-		value = (u32 *)&version.bytes[cmd];
-		ret = m5mols_read(sd, SYSTEM_CMD(cmd), value);
+		ret = m5mols_read_u8(sd, SYSTEM_CMD(cmd), &version.bytes[cmd]);
 		if (ret)
 			return ret;
 	} while (cmd++ != CAT0_VER_AWB);
 
 	do {
-		value = (u32 *)&version.bytes[cmd];
-		ret = m5mols_read(sd, SYSTEM_VER_STRING, value);
+		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &version.bytes[cmd]);
 		if (ret)
 			return ret;
 		if (cmd >= VERSION_SIZE - 1)
 			return -EINVAL;
 	} while (version.bytes[cmd++]);
 
-	value = (u32 *)&version.bytes[cmd];
-	ret = m5mols_read(sd, AF_VERSION, value);
+	ret = m5mols_read_u8(sd, AF_VERSION, &version.bytes[cmd]);
 	if (ret)
 		return ret;
 
@@ -722,7 +760,7 @@ static int m5mols_init_controls(struct m5mols_info *info)
 	int ret;
 
 	/* Determine value's range & step of controls for various FW version */
-	ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure);
+	ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &max_exposure);
 	if (!ret)
 		step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1;
 	if (ret)
@@ -842,18 +880,18 @@ static void m5mols_irq_work(struct work_struct *work)
 	struct m5mols_info *info =
 		container_of(work, struct m5mols_info, work_irq);
 	struct v4l2_subdev *sd = &info->sd;
-	u32 reg;
+	u8 reg;
 	int ret;
 
 	if (!is_powered(info) ||
-			m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt))
+			m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &info->interrupt))
 		return;
 
 	switch (info->interrupt & REG_INT_MASK) {
 	case REG_INT_AF:
 		if (!is_available_af(info))
 			break;
-		ret = m5mols_read(sd, AF_STATUS, &reg);
+		ret = m5mols_read_u8(sd, AF_STATUS, &reg);
 		v4l2_dbg(2, m5mols_debug, sd, "AF %s\n",
 			 reg == REG_AF_FAIL ? "Failed" :
 			 reg == REG_AF_SUCCESS ? "Success" :
-- 
cgit v1.2.3-58-ga151


From a6354d2e5da646926ce492b66b527a1efc39cd27 Mon Sep 17 00:00:00 2001
From: "HeungJun, Kim" <riverful.kim@samsung.com>
Date: Tue, 7 Jun 2011 01:59:44 -0300
Subject: [media] m5mols: remove union in the m5mols_get_version(), and
 VERSION_SIZE

Remove union version in the m5mols_get_version(), and read version information
directly. Also remove VERSION_SIZE.

Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/m5mols/m5mols.h      |  1 -
 drivers/media/video/m5mols/m5mols_core.c | 50 ++++++++++++++++----------------
 drivers/media/video/m5mols/m5mols_reg.h  | 13 ++++++++-
 3 files changed, 37 insertions(+), 27 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
index dbe8928855de..9ae170935871 100644
--- a/drivers/media/video/m5mols/m5mols.h
+++ b/drivers/media/video/m5mols/m5mols.h
@@ -154,7 +154,6 @@ struct m5mols_version {
 	u8	str[VERSION_STRING_SIZE];
 	u8	af;
 };
-#define VERSION_SIZE sizeof(struct m5mols_version)
 
 /**
  * struct m5mols_info - M-5MOLS driver data structure
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 2b1f23f8d063..9815f2c75e83 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -386,37 +386,37 @@ int m5mols_mode(struct m5mols_info *info, u8 mode)
 static int m5mols_get_version(struct v4l2_subdev *sd)
 {
 	struct m5mols_info *info = to_m5mols(sd);
-	union {
-		struct m5mols_version ver;
-		u8 bytes[VERSION_SIZE];
-	} version;
-	u8 cmd = CAT0_VER_CUSTOMER;
+	struct m5mols_version *ver = &info->ver;
+	u8 *str = ver->str;
+	int i;
 	int ret;
 
-	do {
-		ret = m5mols_read_u8(sd, SYSTEM_CMD(cmd), &version.bytes[cmd]);
-		if (ret)
-			return ret;
-	} while (cmd++ != CAT0_VER_AWB);
+	ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer);
+	if (!ret)
+		ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb);
+	if (!ret)
+		ret = m5mols_read_u8(sd, AF_VERSION, &ver->af);
+	if (ret)
+		return ret;
 
-	do {
-		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &version.bytes[cmd]);
+	for (i = 0; i < VERSION_STRING_SIZE; i++) {
+		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]);
 		if (ret)
 			return ret;
-		if (cmd >= VERSION_SIZE - 1)
-			return -EINVAL;
-	} while (version.bytes[cmd++]);
-
-	ret = m5mols_read_u8(sd, AF_VERSION, &version.bytes[cmd]);
-	if (ret)
-		return ret;
+	}
 
-	/* store version information swapped for being readable */
-	info->ver	= version.ver;
-	info->ver.fw	= be16_to_cpu(info->ver.fw);
-	info->ver.hw	= be16_to_cpu(info->ver.hw);
-	info->ver.param	= be16_to_cpu(info->ver.param);
-	info->ver.awb	= be16_to_cpu(info->ver.awb);
+	ver->fw = be16_to_cpu(ver->fw);
+	ver->hw = be16_to_cpu(ver->hw);
+	ver->param = be16_to_cpu(ver->param);
+	ver->awb = be16_to_cpu(ver->awb);
 
 	v4l2_info(sd, "Manufacturer\t[%s]\n",
 			is_manufacturer(info, REG_SAMSUNG_ELECTRO) ?
diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h
index 8260f5030c7e..5f5bdcf608b6 100644
--- a/drivers/media/video/m5mols/m5mols_reg.h
+++ b/drivers/media/video/m5mols/m5mols_reg.h
@@ -56,13 +56,24 @@
  * more specific contents, see definition if file m5mols.h.
  */
 #define CAT0_VER_CUSTOMER	0x00	/* customer version */
-#define CAT0_VER_AWB		0x09	/* Auto WB version */
+#define CAT0_VER_PROJECT	0x01	/* project version */
+#define CAT0_VER_FIRMWARE	0x02	/* Firmware version */
+#define CAT0_VER_HARDWARE	0x04	/* Hardware version */
+#define CAT0_VER_PARAMETER	0x06	/* Parameter version */
+#define CAT0_VER_AWB		0x08	/* Auto WB version */
 #define CAT0_VER_STRING		0x0a	/* string including M-5MOLS */
 #define CAT0_SYSMODE		0x0b	/* SYSTEM mode register */
 #define CAT0_STATUS		0x0c	/* SYSTEM mode status register */
 #define CAT0_INT_FACTOR		0x10	/* interrupt pending register */
 #define CAT0_INT_ENABLE		0x11	/* interrupt enable register */
 
+#define SYSTEM_VER_CUSTOMER	I2C_REG(CAT_SYSTEM, CAT0_VER_CUSTOMER, 1)
+#define SYSTEM_VER_PROJECT	I2C_REG(CAT_SYSTEM, CAT0_VER_PROJECT, 1)
+#define SYSTEM_VER_FIRMWARE	I2C_REG(CAT_SYSTEM, CAT0_VER_FIRMWARE, 2)
+#define SYSTEM_VER_HARDWARE	I2C_REG(CAT_SYSTEM, CAT0_VER_HARDWARE, 2)
+#define SYSTEM_VER_PARAMETER	I2C_REG(CAT_SYSTEM, CAT0_VER_PARAMETER, 2)
+#define SYSTEM_VER_AWB		I2C_REG(CAT_SYSTEM, CAT0_VER_AWB, 2)
+
 #define SYSTEM_SYSMODE		I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1)
 #define REG_SYSINIT		0x00	/* SYSTEM mode */
 #define REG_PARAMETER		0x01	/* PARAMETER mode */
-- 
cgit v1.2.3-58-ga151


From c30701130cf7bff4f97a148b1bc96f878c046a40 Mon Sep 17 00:00:00 2001
From: "HeungJun, Kim" <riverful.kim@samsung.com>
Date: Tue, 7 Jun 2011 02:00:58 -0300
Subject: [media] m5mols: Use proper email address format

Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/m5mols/m5mols.h          | 4 ++--
 drivers/media/video/m5mols/m5mols_capture.c  | 4 ++--
 drivers/media/video/m5mols/m5mols_controls.c | 4 ++--
 drivers/media/video/m5mols/m5mols_core.c     | 4 ++--
 drivers/media/video/m5mols/m5mols_reg.h      | 4 ++--
 include/media/m5mols.h                       | 4 ++--
 6 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
index 9ae170935871..89d09a8914f8 100644
--- a/drivers/media/video/m5mols/m5mols.h
+++ b/drivers/media/video/m5mols/m5mols.h
@@ -2,10 +2,10 @@
  * Header for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
index 751f4593da9b..d9471928369d 100644
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ b/drivers/media/video/m5mols/m5mols_capture.c
@@ -2,10 +2,10 @@
  * The Capture code for Fujitsu M-5MOLS ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c
index d392c83fbf05..d135d20d09cf 100644
--- a/drivers/media/video/m5mols/m5mols_controls.c
+++ b/drivers/media/video/m5mols/m5mols_controls.c
@@ -2,10 +2,10 @@
  * Controls for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 9815f2c75e83..43c68f51c5ce 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -2,10 +2,10 @@
  * Driver for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h
index 5f5bdcf608b6..c755bd6edfe9 100644
--- a/drivers/media/video/m5mols/m5mols_reg.h
+++ b/drivers/media/video/m5mols/m5mols_reg.h
@@ -2,10 +2,10 @@
  * Register map for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/include/media/m5mols.h b/include/media/m5mols.h
index 2d7e7ca2313d..aac2c0e06d5e 100644
--- a/include/media/m5mols.h
+++ b/include/media/m5mols.h
@@ -2,10 +2,10 @@
  * Driver header for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
-- 
cgit v1.2.3-58-ga151


From 9a7b2d1f0eb0a6b674726c9a9d77ce83fd0b27fe Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 6 Jun 2011 14:43:39 -0300
Subject: [media] pwc: better usb disconnect handling

Unplugging a pwc cam while an app has the /dev/video# node open leads
to an oops in pwc_video_close when the app closes the node, because
the disconnect handler has free-ed the pdev struct pwc_video_close
tries to use. Instead of adding some sort of bandaid for this.
fix it properly using the v4l2 core's new(ish) behavior of keeping the
v4l2_dev structure around until both unregister has been called, and
all file handles referring  to it have been closed:

Embed the v4l2_dev structure in the pdev structure and define a v4l2 dev
release callback releasing the pdev structure (and thus also the embedded
v4l2 dev structure.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/pwc/pwc-ctrl.c |   2 +-
 drivers/media/video/pwc/pwc-if.c   | 152 ++++++++++++-------------------------
 drivers/media/video/pwc/pwc.h      |   4 +-
 3 files changed, 50 insertions(+), 108 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 1593f8deb810..760b4de13adf 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -1414,7 +1414,7 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	{
 		ARG_DEF(struct pwc_probe, probe)
 
-		strcpy(ARGR(probe).name, pdev->vdev->name);
+		strcpy(ARGR(probe).name, pdev->vdev.name);
 		ARGR(probe).type = pdev->type;
 		ARG_OUT(probe)
 		break;
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 356cd42b593b..b0bde5a87c8a 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -40,7 +40,7 @@
    Oh yes, convention: to disctinguish between all the various pointers to
    device-structures, I use these names for the pointer variables:
    udev: struct usb_device *
-   vdev: struct video_device *
+   vdev: struct video_device (member of pwc_dev)
    pdev: struct pwc_devive *
 */
 
@@ -152,6 +152,7 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
 			  size_t count, loff_t *ppos);
 static unsigned int pwc_video_poll(struct file *file, poll_table *wait);
 static int  pwc_video_mmap(struct file *file, struct vm_area_struct *vma);
+static void pwc_video_release(struct video_device *vfd);
 
 static const struct v4l2_file_operations pwc_fops = {
 	.owner =	THIS_MODULE,
@@ -164,41 +165,11 @@ static const struct v4l2_file_operations pwc_fops = {
 };
 static struct video_device pwc_template = {
 	.name =		"Philips Webcam",	/* Filled in later */
-	.release =	video_device_release,
+	.release =	pwc_video_release,
 	.fops =         &pwc_fops,
+	.ioctl_ops =	&pwc_ioctl_ops,
 };
 
-/***************************************************************************/
-
-/* Okay, this is some magic that I worked out and the reasoning behind it...
-
-   The biggest problem with any USB device is of course: "what to do
-   when the user unplugs the device while it is in use by an application?"
-   We have several options:
-   1) Curse them with the 7 plagues when they do (requires divine intervention)
-   2) Tell them not to (won't work: they'll do it anyway)
-   3) Oops the kernel (this will have a negative effect on a user's uptime)
-   4) Do something sensible.
-
-   Of course, we go for option 4.
-
-   It happens that this device will be linked to two times, once from
-   usb_device and once from the video_device in their respective 'private'
-   pointers. This is done when the device is probed() and all initialization
-   succeeded. The pwc_device struct links back to both structures.
-
-   When a device is unplugged while in use it will be removed from the
-   list of known USB devices; I also de-register it as a V4L device, but
-   unfortunately I can't free the memory since the struct is still in use
-   by the file descriptor. This free-ing is then deferend until the first
-   opportunity. Crude, but it works.
-
-   A small 'advantage' is that if a user unplugs the cam and plugs it back
-   in, it should get assigned the same video device minor, but unfortunately
-   it's non-trivial to re-link the cam back to the video device... (that
-   would surely be magic! :))
-*/
-
 /***************************************************************************/
 /* Private functions */
 
@@ -1016,16 +987,15 @@ static ssize_t show_snapshot_button_status(struct device *class_dev,
 static DEVICE_ATTR(button, S_IRUGO | S_IWUSR, show_snapshot_button_status,
 		   NULL);
 
-static int pwc_create_sysfs_files(struct video_device *vdev)
+static int pwc_create_sysfs_files(struct pwc_device *pdev)
 {
-	struct pwc_device *pdev = video_get_drvdata(vdev);
 	int rc;
 
-	rc = device_create_file(&vdev->dev, &dev_attr_button);
+	rc = device_create_file(&pdev->vdev.dev, &dev_attr_button);
 	if (rc)
 		goto err;
 	if (pdev->features & FEATURE_MOTOR_PANTILT) {
-		rc = device_create_file(&vdev->dev, &dev_attr_pan_tilt);
+		rc = device_create_file(&pdev->vdev.dev, &dev_attr_pan_tilt);
 		if (rc)
 			goto err_button;
 	}
@@ -1033,19 +1003,17 @@ static int pwc_create_sysfs_files(struct video_device *vdev)
 	return 0;
 
 err_button:
-	device_remove_file(&vdev->dev, &dev_attr_button);
+	device_remove_file(&pdev->vdev.dev, &dev_attr_button);
 err:
 	PWC_ERROR("Could not create sysfs files.\n");
 	return rc;
 }
 
-static void pwc_remove_sysfs_files(struct video_device *vdev)
+static void pwc_remove_sysfs_files(struct pwc_device *pdev)
 {
-	struct pwc_device *pdev = video_get_drvdata(vdev);
-
 	if (pdev->features & FEATURE_MOTOR_PANTILT)
-		device_remove_file(&vdev->dev, &dev_attr_pan_tilt);
-	device_remove_file(&vdev->dev, &dev_attr_button);
+		device_remove_file(&pdev->vdev.dev, &dev_attr_pan_tilt);
+	device_remove_file(&pdev->vdev.dev, &dev_attr_button);
 }
 
 #ifdef CONFIG_USB_PWC_DEBUG
@@ -1106,7 +1074,7 @@ static int pwc_video_open(struct file *file)
 		if (ret >= 0)
 		{
 			PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n",
-					pdev->vdev->name,
+					pdev->vdev.name,
 					pwc_sensor_type_to_string(i), i);
 		}
 	}
@@ -1180,16 +1148,15 @@ static int pwc_video_open(struct file *file)
 	return 0;
 }
 
-
-static void pwc_cleanup(struct pwc_device *pdev)
+static void pwc_video_release(struct video_device *vfd)
 {
-	pwc_remove_sysfs_files(pdev->vdev);
-	video_unregister_device(pdev->vdev);
+	struct pwc_device *pdev = container_of(vfd, struct pwc_device, vdev);
+	int hint;
 
-#ifdef CONFIG_USB_PWC_INPUT_EVDEV
-	if (pdev->button_dev)
-		input_unregister_device(pdev->button_dev);
-#endif
+	/* search device_hint[] table if we occupy a slot, by any chance */
+	for (hint = 0; hint < MAX_DEV_HINTS; hint++)
+		if (device_hint[hint].pdev == pdev)
+			device_hint[hint].pdev = NULL;
 
 	kfree(pdev);
 }
@@ -1199,7 +1166,7 @@ static int pwc_video_close(struct file *file)
 {
 	struct video_device *vdev = file->private_data;
 	struct pwc_device *pdev;
-	int i, hint;
+	int i;
 
 	PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev);
 
@@ -1234,12 +1201,6 @@ static int pwc_video_close(struct file *file)
 		}
 		pdev->vopen--;
 		PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen);
-	} else {
-		pwc_cleanup(pdev);
-		/* search device_hint[] table if we occupy a slot, by any chance */
-		for (hint = 0; hint < MAX_DEV_HINTS; hint++)
-			if (device_hint[hint].pdev == pdev)
-				device_hint[hint].pdev = NULL;
 	}
 
 	return 0;
@@ -1715,19 +1676,12 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	init_waitqueue_head(&pdev->frameq);
 	pdev->vcompression = pwc_preferred_compression;
 
-	/* Allocate video_device structure */
-	pdev->vdev = video_device_alloc();
-	if (!pdev->vdev) {
-		PWC_ERROR("Err, cannot allocate video_device struture. Failing probe.");
-		rc = -ENOMEM;
-		goto err_free_mem;
-	}
-	memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
-	pdev->vdev->parent = &intf->dev;
-	pdev->vdev->lock = &pdev->modlock;
-	pdev->vdev->ioctl_ops = &pwc_ioctl_ops;
-	strcpy(pdev->vdev->name, name);
-	video_set_drvdata(pdev->vdev, pdev);
+	/* Init video_device structure */
+	memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template));
+	pdev->vdev.parent = &intf->dev;
+	pdev->vdev.lock = &pdev->modlock;
+	strcpy(pdev->vdev.name, name);
+	video_set_drvdata(&pdev->vdev, pdev);
 
 	pdev->release = le16_to_cpu(udev->descriptor.bcdDevice);
 	PWC_DEBUG_PROBE("Release: %04x\n", pdev->release);
@@ -1746,8 +1700,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		}
 	}
 
-	pdev->vdev->release = video_device_release;
-
 	/* occupy slot */
 	if (hint < MAX_DEV_HINTS)
 		device_hint[hint].pdev = pdev;
@@ -1759,16 +1711,16 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	pwc_set_leds(pdev, 0, 0);
 	pwc_camera_power(pdev, 0);
 
-	rc = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr);
+	rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr);
 	if (rc < 0) {
 		PWC_ERROR("Failed to register as video device (%d).\n", rc);
-		goto err_video_release;
+		goto err_free_mem;
 	}
-	rc = pwc_create_sysfs_files(pdev->vdev);
+	rc = pwc_create_sysfs_files(pdev);
 	if (rc)
 		goto err_video_unreg;
 
-	PWC_INFO("Registered as %s.\n", video_device_node_name(pdev->vdev));
+	PWC_INFO("Registered as %s.\n", video_device_node_name(&pdev->vdev));
 
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 	/* register webcam snapshot button input device */
@@ -1776,7 +1728,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	if (!pdev->button_dev) {
 		PWC_ERROR("Err, insufficient memory for webcam snapshot button device.");
 		rc = -ENOMEM;
-		pwc_remove_sysfs_files(pdev->vdev);
+		pwc_remove_sysfs_files(pdev);
 		goto err_video_unreg;
 	}
 
@@ -1794,7 +1746,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	if (rc) {
 		input_free_device(pdev->button_dev);
 		pdev->button_dev = NULL;
-		pwc_remove_sysfs_files(pdev->vdev);
+		pwc_remove_sysfs_files(pdev);
 		goto err_video_unreg;
 	}
 #endif
@@ -1804,10 +1756,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 err_video_unreg:
 	if (hint < MAX_DEV_HINTS)
 		device_hint[hint].pdev = NULL;
-	video_unregister_device(pdev->vdev);
-	pdev->vdev = NULL;	/* So we don't try to release it below */
-err_video_release:
-	video_device_release(pdev->vdev);
+	video_unregister_device(&pdev->vdev);
 err_free_mem:
 	kfree(pdev);
 	return rc;
@@ -1816,10 +1765,8 @@ err_free_mem:
 /* The user yanked out the cable... */
 static void usb_pwc_disconnect(struct usb_interface *intf)
 {
-	struct pwc_device *pdev;
-	int hint;
+	struct pwc_device *pdev  = usb_get_intfdata(intf);
 
-	pdev = usb_get_intfdata (intf);
 	mutex_lock(&pdev->modlock);
 	usb_set_intfdata (intf, NULL);
 	if (pdev == NULL) {
@@ -1836,30 +1783,25 @@ static void usb_pwc_disconnect(struct usb_interface *intf)
 	}
 
 	/* We got unplugged; this is signalled by an EPIPE error code */
-	if (pdev->vopen) {
-		PWC_INFO("Disconnected while webcam is in use!\n");
-		pdev->error_status = EPIPE;
-	}
+	pdev->error_status = EPIPE;
+	pdev->unplugged = 1;
 
 	/* Alert waiting processes */
 	wake_up_interruptible(&pdev->frameq);
-	/* Wait until device is closed */
-	if (pdev->vopen) {
-		pdev->unplugged = 1;
-		pwc_iso_stop(pdev);
-	} else {
-		/* Device is closed, so we can safely unregister it */
-		PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n");
 
-disconnect_out:
-		/* search device_hint[] table if we occupy a slot, by any chance */
-		for (hint = 0; hint < MAX_DEV_HINTS; hint++)
-			if (device_hint[hint].pdev == pdev)
-				device_hint[hint].pdev = NULL;
-	}
+	/* No need to keep the urbs around after disconnection */
+	pwc_isoc_cleanup(pdev);
 
+disconnect_out:
 	mutex_unlock(&pdev->modlock);
-	pwc_cleanup(pdev);
+
+	pwc_remove_sysfs_files(pdev);
+	video_unregister_device(&pdev->vdev);
+
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+	if (pdev->button_dev)
+		input_unregister_device(pdev->button_dev);
+#endif
 }
 
 
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index e947766337d6..083f8b15df73 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -162,9 +162,9 @@ struct pwc_imgbuf
 
 struct pwc_device
 {
-   struct video_device *vdev;
+	struct video_device vdev;
 
-   /* Pointer to our usb_device */
+   /* Pointer to our usb_device, may be NULL after unplug */
    struct usb_device *udev;
 
    int type;                    /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
-- 
cgit v1.2.3-58-ga151


From a52a82fc3a397261ecbcbd441498be58997379c8 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed, 1 Jun 2011 12:57:37 -0300
Subject: [media] media: vb2: add __GFP_NOWARN to dma-sg allocator

Add __GFP_NOWARN parameter to videobuf2 dma-sg allocator to prevent
kernel warning and stack dump if there is not enough memory available.
Videobuf2 and drivers should correctly handle no memory case, so there
is no need for stack dump and extensive log.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/videobuf2-dma-sg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c
index b2d9485aac75..10a20d9509d9 100644
--- a/drivers/media/video/videobuf2-dma-sg.c
+++ b/drivers/media/video/videobuf2-dma-sg.c
@@ -62,7 +62,7 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size)
 		goto fail_pages_array_alloc;
 
 	for (i = 0; i < buf->sg_desc.num_pages; ++i) {
-		buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO);
+		buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN);
 		if (NULL == buf->pages[i])
 			goto fail_pages_alloc;
 		sg_set_page(&buf->sg_desc.sglist[i],
-- 
cgit v1.2.3-58-ga151


From bf7b73efb7f52abf56b512546c3bbc35001dd696 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed, 8 Jun 2011 06:15:05 -0300
Subject: [media] Revert "[media] v4l2: vb2: one more fix for REQBUFS()"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This reverts commit 31901a078af29c33c736dcbf815656920e904632.

Queue should be reinitialized on each REQBUFS() call even if the memory
access method and buffer count have not been changed. The user might have
changed the format and if we go the short path introduced in that commit,
the memory buffer will not be reallocated to fit with new format.

The previous patch was just over-engineered optimization, which just
introduced a bug to videobuf2.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/videobuf2-core.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 6ba1461d51ef..6489aa26e788 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -492,13 +492,6 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
 		return -EINVAL;
 	}
 
-	/*
-	 * If the same number of buffers and memory access method is requested
-	 * then return immediately.
-	 */
-	if (q->memory == req->memory && req->count == q->num_buffers)
-		return 0;
-
 	if (req->count == 0 || q->num_buffers != 0 || q->memory != req->memory) {
 		/*
 		 * We already have buffers allocated, so first check if they
-- 
cgit v1.2.3-58-ga151


From afdea8bac5e80362459940e18e705d792e677a57 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Fri, 10 Jun 2011 08:58:42 -0300
Subject: [media] media: vb2: reset queued_count value during queue
 reinitialization
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

queued_count variable was left untouched during the queue reinitialization
in __vb2_queue_cancel, what might lead to mismatch between the real number
of queued buffers and queued_count variable.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/videobuf2-core.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 6489aa26e788..84f03b25aedb 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -1189,6 +1189,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
 	 * has not already dequeued before initiating cancel.
 	 */
 	INIT_LIST_HEAD(&q->done_list);
+	atomic_set(&q->queued_count, 0);
 	wake_up_all(&q->done_wq);
 
 	/*
-- 
cgit v1.2.3-58-ga151


From 66072d4fa7cb644f1f064e290f8fddfbd8ccd478 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Tue, 28 Jun 2011 08:29:02 -0300
Subject: [media] media: vb2: fix allocation failure check

__vb2_queue_alloc function returns the number of successfully allocated
buffers. There is no point in checking if the returned value is negative.
If this function returns 0, videobuf2 should just return -ENOMEM to
userspace, because no driver can work without memory buffers.

Reported-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/videobuf2-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 84f03b25aedb..3015e6000946 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -532,9 +532,9 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
 	/* Finally, allocate buffers and video memory */
 	ret = __vb2_queue_alloc(q, req->memory, num_buffers, num_planes,
 				plane_sizes);
-	if (ret < 0) {
-		dprintk(1, "Memory allocation failed with error: %d\n", ret);
-		return ret;
+	if (ret == 0) {
+		dprintk(1, "Memory allocation failed\n");
+		return -ENOMEM;
 	}
 
 	/*
-- 
cgit v1.2.3-58-ga151


From ca4186f06fecbf2b692a42cdea54b7ef23b2496c Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Wed, 1 Jun 2011 13:39:46 -0300
Subject: [media] media: omap3isp: fix a potential NULL deref

Fix a potential NULL pointer dereference by skipping registration of
external entities in case none are provided.

This is useful at least when testing mere memory-to-memory scenarios.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap3isp/isp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index c9fd04ee70a8..94b6ed89e195 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -1748,7 +1748,7 @@ static int isp_register_entities(struct isp_device *isp)
 		goto done;
 
 	/* Register external entities */
-	for (subdevs = pdata->subdevs; subdevs->subdevs; ++subdevs) {
+	for (subdevs = pdata->subdevs; subdevs && subdevs->subdevs; ++subdevs) {
 		struct v4l2_subdev *sensor;
 		struct media_entity *input;
 		unsigned int flags;
-- 
cgit v1.2.3-58-ga151


From c064b8eac8da5d494fd221f14219c4f39502deb2 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 15 Jun 2011 05:20:34 -0300
Subject: [media] v4l: Don't access media entity after is has been destroyed

Entities associated with video device nodes are unregistered in
video_unregister_device(). This destroys the entity even though it can
still be accessed through open video device nodes.

Move the media_device_unregister_entity() call from
video_unregister_device() to v4l2_device_release() to ensure that the
entity isn't unregistered until the last reference to the video device
is released.

Also remove the media_entity_get()/put() calls from v4l2-dev.c. Those
functions were designed for subdevs, to avoid a parent module from being
removed while still accessible through board code. They're not currently
needed for video device nodes, and will oops when a hotpluggable device
is disconnected during streaming, as media_entity_put() called in
v4l2_device_release() tries to access entity->parent->dev->driver which
is set to NULL when the device is disconnected.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-dev.c | 39 +++++++--------------------------------
 1 file changed, 7 insertions(+), 32 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 19d5ae293780..06f14008b346 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -167,6 +167,12 @@ static void v4l2_device_release(struct device *cd)
 
 	mutex_unlock(&videodev_lock);
 
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
+	    vdev->vfl_type != VFL_TYPE_SUBDEV)
+		media_device_unregister_entity(&vdev->entity);
+#endif
+
 	/* Release video_device and perform other
 	   cleanups as needed. */
 	vdev->release(vdev);
@@ -389,9 +395,6 @@ static int v4l2_mmap(struct file *filp, struct vm_area_struct *vm)
 static int v4l2_open(struct inode *inode, struct file *filp)
 {
 	struct video_device *vdev;
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	struct media_entity *entity = NULL;
-#endif
 	int ret = 0;
 
 	/* Check if the video device is available */
@@ -405,17 +408,6 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 	/* and increase the device refcount */
 	video_get(vdev);
 	mutex_unlock(&videodev_lock);
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
-	    vdev->vfl_type != VFL_TYPE_SUBDEV) {
-		entity = media_entity_get(&vdev->entity);
-		if (!entity) {
-			ret = -EBUSY;
-			video_put(vdev);
-			return ret;
-		}
-	}
-#endif
 	if (vdev->fops->open) {
 		if (vdev->lock && mutex_lock_interruptible(vdev->lock)) {
 			ret = -ERESTARTSYS;
@@ -431,14 +423,8 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 
 err:
 	/* decrease the refcount in case of an error */
-	if (ret) {
-#if defined(CONFIG_MEDIA_CONTROLLER)
-		if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
-		    vdev->vfl_type != VFL_TYPE_SUBDEV)
-			media_entity_put(entity);
-#endif
+	if (ret)
 		video_put(vdev);
-	}
 	return ret;
 }
 
@@ -455,11 +441,6 @@ static int v4l2_release(struct inode *inode, struct file *filp)
 		if (vdev->lock)
 			mutex_unlock(vdev->lock);
 	}
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
-	    vdev->vfl_type != VFL_TYPE_SUBDEV)
-		media_entity_put(&vdev->entity);
-#endif
 	/* decrease the refcount unconditionally since the release()
 	   return value is ignored. */
 	video_put(vdev);
@@ -754,12 +735,6 @@ void video_unregister_device(struct video_device *vdev)
 	if (!vdev || !video_is_registered(vdev))
 		return;
 
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
-	    vdev->vfl_type != VFL_TYPE_SUBDEV)
-		media_device_unregister_entity(&vdev->entity);
-#endif
-
 	mutex_lock(&videodev_lock);
 	/* This must be in a critical section to prevent a race with v4l2_open.
 	 * Once this bit has been cleared video_get may never be called again.
-- 
cgit v1.2.3-58-ga151


From a96aa5342d575980e5b572cde88036f3a878ebee Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 28 Jun 2011 18:17:48 -0300
Subject: [media] uvcvideo: Ignore entities for terminals with no supported
 format

If a streaming interface has no supported format, the driver won't
create a video device for the associated terminal. Fix an oops by
ignoring that terminal when creating links between entities.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_entity.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c
index c3ab0c813be2..48fea373c25a 100644
--- a/drivers/media/video/uvc/uvc_entity.c
+++ b/drivers/media/video/uvc/uvc_entity.c
@@ -27,14 +27,20 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain,
 	struct uvc_entity *entity)
 {
 	const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE;
-	struct uvc_entity *remote;
+	struct media_entity *sink;
 	unsigned int i;
-	u8 remote_pad;
-	int ret = 0;
+	int ret;
+
+	sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
+	     ? (entity->vdev ? &entity->vdev->entity : NULL)
+	     : &entity->subdev.entity;
+	if (sink == NULL)
+		return 0;
 
 	for (i = 0; i < entity->num_pads; ++i) {
 		struct media_entity *source;
-		struct media_entity *sink;
+		struct uvc_entity *remote;
+		u8 remote_pad;
 
 		if (!(entity->pads[i].flags & MEDIA_PAD_FL_SINK))
 			continue;
@@ -43,10 +49,11 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain,
 		if (remote == NULL)
 			return -EINVAL;
 
-		source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING)
-		       ? &remote->vdev->entity : &remote->subdev.entity;
-		sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
-		     ? &entity->vdev->entity : &entity->subdev.entity;
+		source = (UVC_ENTITY_TYPE(remote) != UVC_TT_STREAMING)
+		       ? (remote->vdev ? &remote->vdev->entity : NULL)
+		       : &remote->subdev.entity;
+		if (source == NULL)
+			continue;
 
 		remote_pad = remote->num_pads - 1;
 		ret = media_entity_create_link(source, remote_pad,
@@ -55,11 +62,10 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain,
 			return ret;
 	}
 
-	if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING)
-		ret = v4l2_device_register_subdev(&chain->dev->vdev,
-						  &entity->subdev);
+	if (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
+		return 0;
 
-	return ret;
+	return v4l2_device_register_subdev(&chain->dev->vdev, &entity->subdev);
 }
 
 static struct v4l2_subdev_ops uvc_subdev_ops = {
@@ -84,9 +90,11 @@ static int uvc_mc_init_entity(struct uvc_entity *entity)
 
 		ret = media_entity_init(&entity->subdev.entity,
 					entity->num_pads, entity->pads, 0);
-	} else
+	} else if (entity->vdev != NULL) {
 		ret = media_entity_init(&entity->vdev->entity,
 					entity->num_pads, entity->pads, 0);
+	} else
+		ret = 0;
 
 	return ret;
 }
-- 
cgit v1.2.3-58-ga151


From 8ca2c80b170c47eeb55f0c2a0f2b8edf85f35d49 Mon Sep 17 00:00:00 2001
From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Date: Tue, 24 May 2011 12:22:03 -0300
Subject: [media] uvcvideo: Remove buffers from the queues when freeing

When freeing memory for the video buffers also remove them from the
irq & main queues.

This fixes an oops when doing the following:

open ("/dev/video", ..)
VIDIOC_REQBUFS
VIDIOC_QBUF
VIDIOC_REQBUFS
close ()

As the second VIDIOC_REQBUFS will cause the list entries of the buffers
to be cleared while they still hang around on the main and irc queues

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_queue.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index 109a06384a8f..f90ce9fce539 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -104,6 +104,8 @@ static int __uvc_free_buffers(struct uvc_video_queue *queue)
 	}
 
 	if (queue->count) {
+		uvc_queue_cancel(queue, 0);
+		INIT_LIST_HEAD(&queue->mainqueue);
 		vfree(queue->mem);
 		queue->count = 0;
 	}
-- 
cgit v1.2.3-58-ga151


From aa122d424b14b4a4c5ba302e668366717e9cac7b Mon Sep 17 00:00:00 2001
From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Date: Mon, 30 May 2011 15:02:00 -0300
Subject: [media] uvcvideo: Disable the queue when failing to start

When failing to start the camera we should disable the queue again, to
rollback into the same initial state. Otherwise re-trying will always
hit -EBUSY

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_video.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index fc766b9f24c5..49994793cc77 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -1255,8 +1255,10 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable)
 
 	/* Commit the streaming parameters. */
 	ret = uvc_commit_video(stream, &stream->ctrl);
-	if (ret < 0)
+	if (ret < 0) {
+		uvc_queue_enable(&stream->queue, 0);
 		return ret;
+	}
 
 	return uvc_init_video(stream, GFP_KERNEL);
 }
-- 
cgit v1.2.3-58-ga151


From e8bb10b82f3d9fff79751ee392c1c499e3d68365 Mon Sep 17 00:00:00 2001
From: Vladimir Pantelic <vladoman@gmail.com>
Date: Tue, 26 Apr 2011 04:28:11 -0300
Subject: [media] OMAP_VOUTLIB: Fix wrong resizer calculation

The omap_vout_new_crop() function has possible bug, uses uninitialized
variable "crop.width/height" which is actually output of the function.
Instead we should be using "try_crop.width/height" to calculate the
resizer value.

Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap/omap_voutlib.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c
index 2aa6a76c5e59..8ae74817a110 100644
--- a/drivers/media/video/omap/omap_voutlib.c
+++ b/drivers/media/video/omap/omap_voutlib.c
@@ -193,7 +193,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 		return -EINVAL;
 
 	if (cpu_is_omap24xx()) {
-		if (crop->height != win->w.height) {
+		if (try_crop.height != win->w.height) {
 			/* If we're resizing vertically, we can't support a
 			 * crop width wider than 768 pixels.
 			 */
@@ -202,7 +202,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 		}
 	}
 	/* vertical resizing */
-	vresize = (1024 * crop->height) / win->w.height;
+	vresize = (1024 * try_crop.height) / win->w.height;
 	if (cpu_is_omap24xx() && (vresize > 2048))
 		vresize = 2048;
 	else if (cpu_is_omap34xx() && (vresize > 4096))
@@ -221,7 +221,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 			try_crop.height = 2;
 	}
 	/* horizontal resizing */
-	hresize = (1024 * crop->width) / win->w.width;
+	hresize = (1024 * try_crop.width) / win->w.width;
 	if (cpu_is_omap24xx() && (hresize > 2048))
 		hresize = 2048;
 	else if (cpu_is_omap34xx() && (hresize > 4096))
-- 
cgit v1.2.3-58-ga151


From 8f3a307b9afd8c2ebde46ef317df4df3813301a7 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Thu, 16 Jun 2011 15:32:07 -0300
Subject: [media] OMAP_VOUT: Change hardcoded device node number to -1

With addition of media-controller framework, now we have various
device nodes (/dev/videoX) getting created, so hardcoding
minor number in video_register_device() is not recommended.

So let V4L2 framework choose free minor number for the device.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap/omap_vout.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 4ada9be1d430..eb16607358d0 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -2391,7 +2391,7 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 		/* Register the Video device with V4L2
 		 */
 		vfd = vout->vfd;
-		if (video_register_device(vfd, VFL_TYPE_GRABBER, k + 1) < 0) {
+		if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) {
 			dev_err(&pdev->dev, ": Could not register "
 					"Video for Linux device\n");
 			vfd->minor = -1;
-- 
cgit v1.2.3-58-ga151


From 383e4f69879d11c86ebdd38b3356f6d0690fb4cc Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Thu, 14 Apr 2011 13:42:34 -0300
Subject: [media] omap_vout: Added check in reqbuf & mmap for buf_size
 allocation

The usecase where, user allocates small size of buffer
through bootargs (video1_bufsize/video2_bufsize) and later from application
tries to set the format which requires larger buffer size, driver doesn't
check for insufficient buffer size and allows application to map extra buffer.
This leads to kernel crash, when user application tries to access memory
beyond the allocation size.

Added check in both mmap and reqbuf call back function,
and return error if the size of the buffer allocated by user through
bootargs is less than the S_FMT size.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap/omap_vout.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index eb16607358d0..4d07c5844402 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -982,6 +982,14 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 	startindex = (vout->vid == OMAP_VIDEO1) ?
 		video1_numbuffers : video2_numbuffers;
 
+	/* Check the size of the buffer */
+	if (*size > vout->buffer_size) {
+		v4l2_err(&vout->vid_dev->v4l2_dev,
+				"buffer allocation mismatch [%u] [%u]\n",
+				*size, vout->buffer_size);
+		return -ENOMEM;
+	}
+
 	for (i = startindex; i < *count; i++) {
 		vout->buffer_size = *size;
 
@@ -1228,6 +1236,14 @@ static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma)
 				(vma->vm_pgoff << PAGE_SHIFT));
 		return -EINVAL;
 	}
+	/* Check the size of the buffer */
+	if (size > vout->buffer_size) {
+		v4l2_err(&vout->vid_dev->v4l2_dev,
+				"insufficient memory [%lu] [%u]\n",
+				size, vout->buffer_size);
+		return -ENOMEM;
+	}
+
 	q->bufs[i]->baddr = vma->vm_start;
 
 	vma->vm_flags |= VM_RESERVED;
-- 
cgit v1.2.3-58-ga151


From 258c05637d6b6df2478a2808a3d2350c3c6782d6 Mon Sep 17 00:00:00 2001
From: Andre Bartke <andre.bartke@gmail.com>
Date: Fri, 10 Jun 2011 07:57:54 -0300
Subject: [media] V4L: mx1-camera: fix uninitialized variable

mx1_camera_add_device() can return an uninitialized value of ret.

Signed-off-by: Andre Bartke <andre.bartke@gmail.com>
[g.liakhovetski@gmx.de: modified the fix to remove "ret" completely]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mx1_camera.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index bc0c23a1009c..63f8a0cc33d8 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -444,12 +444,9 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
-	int ret;
 
-	if (pcdev->icd) {
-		ret = -EBUSY;
-		goto ebusy;
-	}
+	if (pcdev->icd)
+		return -EBUSY;
 
 	dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n",
 		 icd->devnum);
@@ -458,8 +455,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-ebusy:
-	return ret;
+	return 0;
 }
 
 static void mx1_camera_remove_device(struct soc_camera_device *icd)
-- 
cgit v1.2.3-58-ga151


From 35d136c8dab034ee14aa00d6082229b4b74607da Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 7 Jun 2011 18:45:17 -0300
Subject: [media] ite-cir: 8709 needs to use pnp resource 2
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Thanks to the intrepid testing and debugging of Matthijs van Drunen, it
was uncovered that at least some variants of the ITE8709 need to use pnp
resource 2, rather than 0, for things to function properly. Resource 0
has a length of only 1, and if you try to bypass the pnp_port_len check
and use it anyway (with either a length of 1 or 2), the system in
question's trackpad ceased to function.

The circa lirc 0.8.7 lirc_ite8709 driver used resource 2, but the value
was (amusingly) changed to 0 by way of a patch from ITE themselves, so I
don't know if there may be variants where 0 actually *is* correct, but
at least in this case and in the original lirc_ite8709 driver author's
case, it sure looks like 2 is the right value.

This fix should probably be applied to all stable kernels with the
ite-cir driver, lest we nuke more people's trackpads.

Tested-by: Matthijs van Drunen
CC: Juan Jesús García de Soria <skandalfo@gmail.com>
CC: stable@kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/ite-cir.c | 12 +++++++++---
 drivers/media/rc/ite-cir.h |  3 +++
 2 files changed, 12 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index e716b931cf7e..ecd3d0280768 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -1347,6 +1347,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 0: ITE8704 */
 	       .model = "ITE8704 CIR transceiver",
 	       .io_region_size = IT87_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1371,6 +1372,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 1: ITE8713 */
 	       .model = "ITE8713 CIR transceiver",
 	       .io_region_size = IT87_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1395,6 +1397,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 2: ITE8708 */
 	       .model = "ITE8708 CIR transceiver",
 	       .io_region_size = IT8708_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1420,6 +1423,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 3: ITE8709 */
 	       .model = "ITE8709 CIR transceiver",
 	       .io_region_size = IT8709_IOREG_LENGTH,
+	       .io_rsrc_no = 2,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1461,6 +1465,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 	struct rc_dev *rdev = NULL;
 	int ret = -ENOMEM;
 	int model_no;
+	int io_rsrc_no;
 
 	ite_dbg("%s called", __func__);
 
@@ -1490,10 +1495,11 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 
 	/* get the description for the device */
 	dev_desc = &ite_dev_descs[model_no];
+	io_rsrc_no = dev_desc->io_rsrc_no;
 
 	/* validate pnp resources */
-	if (!pnp_port_valid(pdev, 0) ||
-	    pnp_port_len(pdev, 0) != dev_desc->io_region_size) {
+	if (!pnp_port_valid(pdev, io_rsrc_no) ||
+	    pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) {
 		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
 		goto failure;
 	}
@@ -1504,7 +1510,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 	}
 
 	/* store resource values */
-	itdev->cir_addr = pnp_port_start(pdev, 0);
+	itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no);
 	itdev->cir_irq = pnp_irq(pdev, 0);
 
 	/* initialize spinlocks */
diff --git a/drivers/media/rc/ite-cir.h b/drivers/media/rc/ite-cir.h
index 16a19f5fd718..aa899a0b9750 100644
--- a/drivers/media/rc/ite-cir.h
+++ b/drivers/media/rc/ite-cir.h
@@ -57,6 +57,9 @@ struct ite_dev_params {
 	/* size of the I/O region */
 	int io_region_size;
 
+	/* IR pnp I/O resource number */
+	int io_rsrc_no;
+
 	/* true if the hardware supports transmission */
 	bool hw_tx_capable;
 
-- 
cgit v1.2.3-58-ga151


From 1ba9268c2bfeebfd70193145685e12faeae92882 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Wed, 8 Jun 2011 15:00:01 -0300
Subject: [media] keymaps: fix table for pinnacle pctv hd devices

Both consumers of RC_MAP_PINNACLE_PCTV_HD send along full RC-5
scancodes, so this update makes this keymap actually *have* full
scancodes, heisted from rc-dib0700-rc5.c. This should fix out of the box
remote functionality for the Pinnacle PCTV HD 800i (cx88 pci card) and
PCTV HD Pro 801e (em28xx usb stick).

CC: stable@kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c | 58 ++++++++++++--------------
 1 file changed, 27 insertions(+), 31 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index bb10ffe086b4..8d558ae63456 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -15,43 +15,39 @@
 /* Pinnacle PCTV HD 800i mini remote */
 
 static struct rc_map_table pinnacle_pctv_hd[] = {
-
-	{ 0x0f, KEY_1 },
-	{ 0x15, KEY_2 },
-	{ 0x10, KEY_3 },
-	{ 0x18, KEY_4 },
-	{ 0x1b, KEY_5 },
-	{ 0x1e, KEY_6 },
-	{ 0x11, KEY_7 },
-	{ 0x21, KEY_8 },
-	{ 0x12, KEY_9 },
-	{ 0x27, KEY_0 },
-
-	{ 0x24, KEY_ZOOM },
-	{ 0x2a, KEY_SUBTITLE },
-
-	{ 0x00, KEY_MUTE },
-	{ 0x01, KEY_ENTER },	/* Pinnacle Logo */
-	{ 0x39, KEY_POWER },
-
-	{ 0x03, KEY_VOLUMEUP },
-	{ 0x09, KEY_VOLUMEDOWN },
-	{ 0x06, KEY_CHANNELUP },
-	{ 0x0c, KEY_CHANNELDOWN },
-
-	{ 0x2d, KEY_REWIND },
-	{ 0x30, KEY_PLAYPAUSE },
-	{ 0x33, KEY_FASTFORWARD },
-	{ 0x3c, KEY_STOP },
-	{ 0x36, KEY_RECORD },
-	{ 0x3f, KEY_EPG },	/* Labeled "?" */
+	/* Key codes for the tiny Pinnacle remote*/
+	{ 0x0700, KEY_MUTE },
+	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
+	{ 0x0739, KEY_POWER },
+	{ 0x0703, KEY_VOLUMEUP },
+	{ 0x0709, KEY_VOLUMEDOWN },
+	{ 0x0706, KEY_CHANNELUP },
+	{ 0x070c, KEY_CHANNELDOWN },
+	{ 0x070f, KEY_1 },
+	{ 0x0715, KEY_2 },
+	{ 0x0710, KEY_3 },
+	{ 0x0718, KEY_4 },
+	{ 0x071b, KEY_5 },
+	{ 0x071e, KEY_6 },
+	{ 0x0711, KEY_7 },
+	{ 0x0721, KEY_8 },
+	{ 0x0712, KEY_9 },
+	{ 0x0727, KEY_0 },
+	{ 0x0724, KEY_ZOOM }, /* 'Square' key */
+	{ 0x072a, KEY_SUBTITLE },   /* 'T' key */
+	{ 0x072d, KEY_REWIND },
+	{ 0x0730, KEY_PLAYPAUSE },
+	{ 0x0733, KEY_FASTFORWARD },
+	{ 0x0736, KEY_RECORD },
+	{ 0x073c, KEY_STOP },
+	{ 0x073f, KEY_HELP }, /* '?' key */
 };
 
 static struct rc_map_list pinnacle_pctv_hd_map = {
 	.map = {
 		.scan    = pinnacle_pctv_hd,
 		.size    = ARRAY_SIZE(pinnacle_pctv_hd),
-		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_PINNACLE_PCTV_HD,
 	}
 };
-- 
cgit v1.2.3-58-ga151


From 3f5c4c73322e4d6f3d40b697dac3073d2adffe41 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 16 Jun 2011 16:18:37 -0300
Subject: [media] rc: fix ghost keypresses with certain hw

With hardware that has to use ir_raw_event_store_edge to collect IR
sample durations, we were not doing an event reset unless
IR_MAX_DURATION had passed. That's around 4 seconds. So if someone
presses up, then down, with less than 4 seconds in between, they'd get
the initial up, then up and down upon pressing down.

To fix this, I've lowered the "send a reset event" logic's threshold to
the input device's REP_DELAY (defaults to 500ms), and with an
saa7134-based GPIO-driven IR receiver in a Hauppauge HVR-1150, I get
*much* better behavior out of the remote now. Special thanks to Devin
for providing the hardware to investigate this issue.

CC: stable@kernel.org
CC: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/ir-raw.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 11c19d8d0ee0..423ed45d6c55 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -114,18 +114,20 @@ int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
 	s64			delta; /* ns */
 	DEFINE_IR_RAW_EVENT(ev);
 	int			rc = 0;
+	int			delay;
 
 	if (!dev->raw)
 		return -EINVAL;
 
 	now = ktime_get();
 	delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
+	delay = MS_TO_NS(dev->input_dev->rep[REP_DELAY]);
 
 	/* Check for a long duration since last event or if we're
 	 * being called for the first time, note that delta can't
 	 * possibly be negative.
 	 */
-	if (delta > IR_MAX_DURATION || !dev->raw->last_type)
+	if (delta > delay || !dev->raw->last_type)
 		type |= IR_START_EVENT;
 	else
 		ev.duration = delta;
-- 
cgit v1.2.3-58-ga151


From 9800b5b619cd9a013a6f0c7d5da0dbbc17a5af30 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 16 Jun 2011 17:30:48 -0300
Subject: [media] saa7134: fix raw IR timeout value

The comment says "wait 15ms", but the code says jiffies_to_msecs(15)
instead of msecs_to_jiffies(15). Fix that. Tested, works fine with both
rc5 and rc6 decode, in-kernel and via lirc userspace, with an HVR-1150.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index ff6c0e97563e..d4ee24bf6928 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -963,7 +963,7 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 	 * to work with other protocols.
 	 */
 	if (!ir->active) {
-		timeout = jiffies + jiffies_to_msecs(15);
+		timeout = jiffies + msecs_to_jiffies(15);
 		mod_timer(&ir->timer, timeout);
 		ir->active = true;
 	}
-- 
cgit v1.2.3-58-ga151


From 842071c9ea021a42256386cb0cbe3735af33c4db Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Mon, 20 Jun 2011 00:04:05 -0300
Subject: [media] imon: auto-config ffdc 7e device

Another device with the 0xffdc device id, this one with 0x7e in the
config byte. Its an iMON VFD + RC6 IR, in a CoolerMaster 260 case.

Reported-by: Filip Streibl <filip@streibl.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/imon.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 7136582a8573..ba480325851b 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1751,6 +1751,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		break;
 	/* iMON VFD, MCE IR */
 	case 0x46:
+	case 0x7e:
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-- 
cgit v1.2.3-58-ga151


From 372b4249243d1e7c12a0f2b67e7badc608fcff45 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Mon, 20 Jun 2011 00:07:13 -0300
Subject: [media] imon: allow either proto on unknown 0xffdc

While 0xffdc devices have their IR protocol hard-coded into the firmware
of the device, we have no known way of telling what it is if we don't
have the device's config byte already in the driver. Unknown devices
default to the imon native protocol, but might actually be rc6, so we
should set the driver up such that the user can load the rc6 keytable
from userspace and still have a working device ahead of its config byte
being added to the driver.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/imon.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index ba480325851b..6bc35eeb653b 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1767,6 +1767,9 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		dev_info(ictx->dev, "Unknown 0xffdc device, "
 			 "defaulting to VFD and iMON IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
+		/* We don't know which one it is, allow user to set the
+		 * RC6 one from userspace if OTHER wasn't correct. */
+		allowed_protos |= RC_TYPE_RC6;
 		break;
 	}
 
-- 
cgit v1.2.3-58-ga151


From 98c32bcded0e249fd48726930ae9f393e0e318b4 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 23 Jun 2011 10:40:55 -0300
Subject: [media] rc: call input_sync after scancode reports

Due to commit cdda911c34006f1089f3c87b1a1f31ab3a4722f2, evdev only
becomes readable when the buffer contains an EV_SYN/SYN_REPORT event. If
we get a repeat or a scancode we don't have a mapping for, we never call
input_sync, and thus those events don't get reported in a timely
fashion.

For example, take an mceusb transceiver with a default rc6 keymap. Press
buttons on an rc5 remote while monitoring with ir-keytable, and you'll
see nothing. Now press a button on the rc6 remote matching the keymap.
You'll suddenly get the rc5 key scancodes, the rc6 scancode and the rc6
key spit out all at the same time.

Pressing and holding a button on a remote we do have a keymap for also
works rather unreliably right now, due to repeat events also happening
without a call to input_sync (we bail from ir_do_keydown before getting
to the point where it calls input_sync).

Easy fix though, just add two strategically placed input_sync calls
right after our input_event calls for EV_MSC, and all is well again.
Technically, we probably should have been doing this all along, its just
that it never caused any functional difference until the referenced
change went into the input layer.

input_sync once per IR signal. There was another hidden bug in the code
where we were calling input_report_key using last_keycode instead of our
just discovered keycode, which manifested with the reordering of calling
input_report_key and setting last_keycode.

Reported-by: Stephan Raue <sraue@openelec.tv>
CC: Stephan Raue <sraue@openelec.tv>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Jeff Brown <jeffbrown@android.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/rc-main.c | 48 ++++++++++++++++++++++++----------------------
 1 file changed, 25 insertions(+), 23 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index f57cd5677ac2..3186ac7c2c10 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -522,18 +522,20 @@ EXPORT_SYMBOL_GPL(rc_g_keycode_from_table);
 /**
  * ir_do_keyup() - internal function to signal the release of a keypress
  * @dev:	the struct rc_dev descriptor of the device
+ * @sync:	whether or not to call input_sync
  *
  * This function is used internally to release a keypress, it must be
  * called with keylock held.
  */
-static void ir_do_keyup(struct rc_dev *dev)
+static void ir_do_keyup(struct rc_dev *dev, bool sync)
 {
 	if (!dev->keypressed)
 		return;
 
 	IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode);
 	input_report_key(dev->input_dev, dev->last_keycode, 0);
-	input_sync(dev->input_dev);
+	if (sync)
+		input_sync(dev->input_dev);
 	dev->keypressed = false;
 }
 
@@ -549,7 +551,7 @@ void rc_keyup(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->keylock, flags);
-	ir_do_keyup(dev);
+	ir_do_keyup(dev, true);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(rc_keyup);
@@ -578,7 +580,7 @@ static void ir_timer_keyup(unsigned long cookie)
 	 */
 	spin_lock_irqsave(&dev->keylock, flags);
 	if (time_is_before_eq_jiffies(dev->keyup_jiffies))
-		ir_do_keyup(dev);
+		ir_do_keyup(dev, true);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 
@@ -597,6 +599,7 @@ void rc_repeat(struct rc_dev *dev)
 	spin_lock_irqsave(&dev->keylock, flags);
 
 	input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode);
+	input_sync(dev->input_dev);
 
 	if (!dev->keypressed)
 		goto out;
@@ -622,29 +625,28 @@ EXPORT_SYMBOL_GPL(rc_repeat);
 static void ir_do_keydown(struct rc_dev *dev, int scancode,
 			  u32 keycode, u8 toggle)
 {
-	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
-
-	/* Repeat event? */
-	if (dev->keypressed &&
-	    dev->last_scancode == scancode &&
-	    dev->last_toggle == toggle)
-		return;
+	bool new_event = !dev->keypressed ||
+			 dev->last_scancode != scancode ||
+			 dev->last_toggle != toggle;
 
-	/* Release old keypress */
-	ir_do_keyup(dev);
+	if (new_event && dev->keypressed)
+		ir_do_keyup(dev, false);
 
-	dev->last_scancode = scancode;
-	dev->last_toggle = toggle;
-	dev->last_keycode = keycode;
+	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
 
-	if (keycode == KEY_RESERVED)
-		return;
+	if (new_event && keycode != KEY_RESERVED) {
+		/* Register a keypress */
+		dev->keypressed = true;
+		dev->last_scancode = scancode;
+		dev->last_toggle = toggle;
+		dev->last_keycode = keycode;
+
+		IR_dprintk(1, "%s: key down event, "
+			   "key 0x%04x, scancode 0x%04x\n",
+			   dev->input_name, keycode, scancode);
+		input_report_key(dev->input_dev, keycode, 1);
+	}
 
-	/* Register a keypress */
-	dev->keypressed = true;
-	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
-		   dev->input_name, keycode, scancode);
-	input_report_key(dev->input_dev, dev->last_keycode, 1);
 	input_sync(dev->input_dev);
 }
 
-- 
cgit v1.2.3-58-ga151


From 4e4a31fb95d88518180517bae3098a23ebde9f9c Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Tue, 14 Jun 2011 03:56:09 -0300
Subject: [media] tuner-core: fix s_std and s_tuner

Both s_std and s_tuner are broken because set_mode_freq is called before the
new std (for s_std) and audmode (for s_tuner) are set.

This patch splits set_mode_freq in a set_mode and a set_freq and in s_std/s_tuner
first calls set_mode, and if that returns 0 (i.e. the mode is supported)
then they set t->std/t->audmode and call set_freq.

This fixes a bug where changing std or audmode would actually change it to
the previous value.

Discovered while testing analog TV standards for cx18 with a tda18271 tuner.

Cc: stable@kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tuner-core.c | 59 +++++++++++++++++++++-------------------
 1 file changed, 31 insertions(+), 28 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 9363ed91a4cb..48797045321b 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -724,19 +724,15 @@ static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode)
 }
 
 /**
- * set_mode_freq - Switch tuner to other mode.
- * @client:	struct i2c_client pointer
+ * set_mode - Switch tuner to other mode.
  * @t:		a pointer to the module's internal struct_tuner
  * @mode:	enum v4l2_type (radio or TV)
- * @freq:	frequency to set (0 means to use the previous one)
  *
  * If tuner doesn't support the needed mode (radio or TV), prints a
  * debug message and returns -EINVAL, changing its state to standby.
- * Otherwise, changes the state and sets frequency to the last value, if
- * the tuner can sleep or if it supports both Radio and TV.
+ * Otherwise, changes the mode and returns 0.
  */
-static int set_mode_freq(struct i2c_client *client, struct tuner *t,
-			 enum v4l2_tuner_type mode, unsigned int freq)
+static int set_mode(struct tuner *t, enum v4l2_tuner_type mode)
 {
 	struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
 
@@ -752,17 +748,27 @@ static int set_mode_freq(struct i2c_client *client, struct tuner *t,
 		t->mode = mode;
 		tuner_dbg("Changing to mode %d\n", mode);
 	}
+	return 0;
+}
+
+/**
+ * set_freq - Set the tuner to the desired frequency.
+ * @t:		a pointer to the module's internal struct_tuner
+ * @freq:	frequency to set (0 means to use the current frequency)
+ */
+static void set_freq(struct tuner *t, unsigned int freq)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&t->sd);
+
 	if (t->mode == V4L2_TUNER_RADIO) {
-		if (freq)
-			t->radio_freq = freq;
-		set_radio_freq(client, t->radio_freq);
+		if (!freq)
+			freq = t->radio_freq;
+		set_radio_freq(client, freq);
 	} else {
-		if (freq)
-			t->tv_freq = freq;
-		set_tv_freq(client, t->tv_freq);
+		if (!freq)
+			freq = t->tv_freq;
+		set_tv_freq(client, freq);
 	}
-
-	return 0;
 }
 
 /*
@@ -1058,10 +1064,9 @@ static void tuner_status(struct dvb_frontend *fe)
 static int tuner_s_radio(struct v4l2_subdev *sd)
 {
 	struct tuner *t = to_tuner(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-	if (set_mode_freq(client, t, V4L2_TUNER_RADIO, 0) == -EINVAL)
-		return 0;
+	if (set_mode(t, V4L2_TUNER_RADIO) == 0)
+		set_freq(t, 0);
 	return 0;
 }
 
@@ -1093,25 +1098,22 @@ static int tuner_s_power(struct v4l2_subdev *sd, int on)
 static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 {
 	struct tuner *t = to_tuner(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-	if (set_mode_freq(client, t, V4L2_TUNER_ANALOG_TV, 0) == -EINVAL)
+	if (set_mode(t, V4L2_TUNER_ANALOG_TV))
 		return 0;
 
 	t->std = std;
 	tuner_fixup_std(t);
-
+	set_freq(t, 0);
 	return 0;
 }
 
 static int tuner_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
 {
 	struct tuner *t = to_tuner(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (set_mode_freq(client, t, f->type, f->frequency) == -EINVAL)
-		return 0;
 
+	if (set_mode(t, f->type) == 0)
+		set_freq(t, f->frequency);
 	return 0;
 }
 
@@ -1180,13 +1182,13 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 static int tuner_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 {
 	struct tuner *t = to_tuner(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-	if (set_mode_freq(client, t, vt->type, 0) == -EINVAL)
+	if (set_mode(t, vt->type))
 		return 0;
 
 	if (t->mode == V4L2_TUNER_RADIO)
 		t->audmode = vt->audmode;
+	set_freq(t, 0);
 
 	return 0;
 }
@@ -1221,7 +1223,8 @@ static int tuner_resume(struct i2c_client *c)
 	tuner_dbg("resume\n");
 
 	if (!t->standby)
-		set_mode_freq(c, t, t->type, 0);
+		if (set_mode(t, t->type) == 0)
+			set_freq(t, 0);
 
 	return 0;
 }
-- 
cgit v1.2.3-58-ga151


From 9bf0ef060ebae452c07cf5b0616247780740bb50 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon, 13 Jun 2011 09:21:56 -0300
Subject: [media] tuner-core: fix tuner_resume: use t->mode instead of t->type

set_mode is called with t->type, which is the tuner type. Instead, use
t->mode which is the actual tuner mode (i.e. radio vs tv).

Cc: stable@kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tuner-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 48797045321b..1843fc293322 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1223,7 +1223,7 @@ static int tuner_resume(struct i2c_client *c)
 	tuner_dbg("resume\n");
 
 	if (!t->standby)
-		if (set_mode(t, t->type) == 0)
+		if (set_mode(t, t->mode) == 0)
 			set_freq(t, 0);
 
 	return 0;
-- 
cgit v1.2.3-58-ga151


From 227690df75382e46a4f6ea1bbc5df855a674b47f Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Sun, 12 Jun 2011 06:36:41 -0300
Subject: [media] v4l2-ioctl.c: prefill tuner type for g_frequency and
 g/s_tuner

The subdevs are supposed to receive a valid tuner type for the g_frequency
and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill
this in v4l2-ioctl.c based on whether the device node from which this is
called is a radio node or not.

The spec does not require applications to fill in the type, and if they
leave it at 0 then the 'check_mode' call in tuner-core.c will return
an error and the ioctl does nothing.

Cc: stable@kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-ioctl.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 506edcc2ddeb..a2e442ab8a5b 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1822,6 +1822,8 @@ static long __video_do_ioctl(struct file *file,
 		if (!ops->vidioc_g_tuner)
 			break;
 
+		p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		ret = ops->vidioc_g_tuner(file, fh, p);
 		if (!ret)
 			dbgarg(cmd, "index=%d, name=%s, type=%d, "
@@ -1840,6 +1842,8 @@ static long __video_do_ioctl(struct file *file,
 
 		if (!ops->vidioc_s_tuner)
 			break;
+		p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		dbgarg(cmd, "index=%d, name=%s, type=%d, "
 				"capability=0x%x, rangelow=%d, "
 				"rangehigh=%d, signal=%d, afc=%d, "
@@ -1858,6 +1862,8 @@ static long __video_do_ioctl(struct file *file,
 		if (!ops->vidioc_g_frequency)
 			break;
 
+		p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		ret = ops->vidioc_g_frequency(file, fh, p);
 		if (!ret)
 			dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
-- 
cgit v1.2.3-58-ga151


From 50e9efd60b213ce43ad6979bfc18e25eec2d8413 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Sun, 12 Jun 2011 06:39:52 -0300
Subject: [media] pvrusb2: fix g/s_tuner support

The tuner-core subdev requires that the type field of v4l2_tuner is
filled in correctly. This is done in v4l2-ioctl.c, but pvrusb2 doesn't
use that yet, so we have to do it manually based on whether the current
input is radio or not.

Tested with my pvrusb2.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mike Isely <isely@pobox.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/pvrusb2/pvrusb2-hdw.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 9d0dd08f57f8..e98d38212791 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -3046,6 +3046,8 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw)
 	if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) {
 		struct v4l2_tuner vt;
 		memset(&vt, 0, sizeof(vt));
+		vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		vt.audmode = hdw->audiomode_val;
 		v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt);
 	}
@@ -5171,6 +5173,8 @@ void pvr2_hdw_status_poll(struct pvr2_hdw *hdw)
 {
 	struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
 	memset(vtp, 0, sizeof(*vtp));
+	vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+		V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 	hdw->tuner_signal_stale = 0;
 	/* Note: There apparently is no replacement for VIDIOC_CROPCAP
 	   using v4l2-subdev - therefore we can't support that AT ALL right
-- 
cgit v1.2.3-58-ga151


From a024c1a6b274e11596d124619e43c25560f64c01 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Sun, 12 Jun 2011 07:02:43 -0300
Subject: [media] bttv: fix s_tuner for radio

Fix typo: g_tuner should have been s_tuner.

Tested with a bttv card.

Cc: stable@kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/bt8xx/bttv-driver.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a97cf2750bd9..834a48394bce 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3474,7 +3474,7 @@ static int radio_s_tuner(struct file *file, void *priv,
 	if (0 != t->index)
 		return -EINVAL;
 
-	bttv_call_all(btv, tuner, g_tuner, t);
+	bttv_call_all(btv, tuner, s_tuner, t);
 	return 0;
 }
 
-- 
cgit v1.2.3-58-ga151


From 338e9e1ad541cbb2a3fa5839376ff6c138d40301 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon, 13 Jun 2011 09:35:56 -0300
Subject: [media] tuner-core/v4l2-subdev: document that the type field has to
 be filled in

The tuner ops g_frequency, g_tuner and s_tuner require that the tuner type
field is filled in. Document this.

The tuner-core doc is based on a patch from Mauro Carvalho Chehab <mchehab@redhat.com>.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tuner-core.c | 29 +++++++++++++++++++++++++++++
 include/media/v4l2-subdev.h      |  7 +++++++
 2 files changed, 36 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 1843fc293322..6c007aa00236 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1117,6 +1117,16 @@ static int tuner_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
 	return 0;
 }
 
+/**
+ * tuner_g_frequency - Get the tuned frequency for the tuner
+ * @sd: pointer to struct v4l2_subdev
+ * @f: pointer to struct v4l2_frequency
+ *
+ * At return, the structure f will be filled with tuner frequency
+ * if the tuner matches the f->type.
+ * Note: f->type should be initialized before calling it.
+ * This is done by either video_ioctl2 or by the bridge driver.
+ */
 static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
 {
 	struct tuner *t = to_tuner(sd);
@@ -1139,6 +1149,16 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
 	return 0;
 }
 
+/**
+ * tuner_g_tuner - Fill in tuner information
+ * @sd: pointer to struct v4l2_subdev
+ * @vt: pointer to struct v4l2_tuner
+ *
+ * At return, the structure vt will be filled with tuner information
+ * if the tuner matches vt->type.
+ * Note: vt->type should be initialized before calling it.
+ * This is done by either video_ioctl2 or by the bridge driver.
+ */
 static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 {
 	struct tuner *t = to_tuner(sd);
@@ -1179,6 +1199,15 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 	return 0;
 }
 
+/**
+ * tuner_s_tuner - Set the tuner's audio mode
+ * @sd: pointer to struct v4l2_subdev
+ * @vt: pointer to struct v4l2_tuner
+ *
+ * Sets the audio mode if the tuner matches vt->type.
+ * Note: vt->type should be initialized before calling it.
+ * This is done by either video_ioctl2 or by the bridge driver.
+ */
 static int tuner_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 {
 	struct tuner *t = to_tuner(sd);
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 224502067c43..2884e3e69cb1 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -175,6 +175,13 @@ struct v4l2_subdev_core_ops {
 
 /* s_radio: v4l device was opened in radio mode.
 
+   g_frequency: freq->type must be filled in. Normally done by video_ioctl2
+	or the bridge driver.
+
+   g_tuner:
+   s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the
+	bridge driver.
+
    s_type_addr: sets tuner type and its I2C addr.
 
    s_config: sets tda9887 specific stuff, like port1, port2 and qss
-- 
cgit v1.2.3-58-ga151


From 487833018eb2b969f20457fcf1956b3c6dbfad51 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon, 13 Jun 2011 09:47:56 -0300
Subject: [media] tuner-core: simplify the standard fixup

Get rid of a number of unnecessary tuner_dbg messages by simplifying
the std fixup function.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tuner-core.c | 93 ++++++++++++----------------------------
 1 file changed, 28 insertions(+), 65 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 6c007aa00236..1e7505eb32e9 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -823,7 +823,8 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq)
 /**
  * tuner_fixup_std - force a given video standard variant
  *
- * @t:	tuner internal struct
+ * @t: tuner internal struct
+ * @std:	TV standard
  *
  * A few devices or drivers have problem to detect some standard variations.
  * On other operational systems, the drivers generally have a per-country
@@ -833,57 +834,39 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq)
  * to distinguish all video standard variations, a modprobe parameter can
  * be used to force a video standard match.
  */
-static int tuner_fixup_std(struct tuner *t)
+static v4l2_std_id tuner_fixup_std(struct tuner *t, v4l2_std_id std)
 {
-	if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) {
+	if (pal[0] != '-' && (std & V4L2_STD_PAL) == V4L2_STD_PAL) {
 		switch (pal[0]) {
 		case '6':
-			tuner_dbg("insmod fixup: PAL => PAL-60\n");
-			t->std = V4L2_STD_PAL_60;
-			break;
+			return V4L2_STD_PAL_60;
 		case 'b':
 		case 'B':
 		case 'g':
 		case 'G':
-			tuner_dbg("insmod fixup: PAL => PAL-BG\n");
-			t->std = V4L2_STD_PAL_BG;
-			break;
+			return V4L2_STD_PAL_BG;
 		case 'i':
 		case 'I':
-			tuner_dbg("insmod fixup: PAL => PAL-I\n");
-			t->std = V4L2_STD_PAL_I;
-			break;
+			return V4L2_STD_PAL_I;
 		case 'd':
 		case 'D':
 		case 'k':
 		case 'K':
-			tuner_dbg("insmod fixup: PAL => PAL-DK\n");
-			t->std = V4L2_STD_PAL_DK;
-			break;
+			return V4L2_STD_PAL_DK;
 		case 'M':
 		case 'm':
-			tuner_dbg("insmod fixup: PAL => PAL-M\n");
-			t->std = V4L2_STD_PAL_M;
-			break;
+			return V4L2_STD_PAL_M;
 		case 'N':
 		case 'n':
-			if (pal[1] == 'c' || pal[1] == 'C') {
-				tuner_dbg("insmod fixup: PAL => PAL-Nc\n");
-				t->std = V4L2_STD_PAL_Nc;
-			} else {
-				tuner_dbg("insmod fixup: PAL => PAL-N\n");
-				t->std = V4L2_STD_PAL_N;
-			}
-			break;
-		case '-':
-			/* default parameter, do nothing */
-			break;
+			if (pal[1] == 'c' || pal[1] == 'C')
+				return V4L2_STD_PAL_Nc;
+			return V4L2_STD_PAL_N;
 		default:
 			tuner_warn("pal= argument not recognised\n");
 			break;
 		}
 	}
-	if ((t->std & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
+	if (secam[0] != '-' && (std & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
 		switch (secam[0]) {
 		case 'b':
 		case 'B':
@@ -891,63 +874,42 @@ static int tuner_fixup_std(struct tuner *t)
 		case 'G':
 		case 'h':
 		case 'H':
-			tuner_dbg("insmod fixup: SECAM => SECAM-BGH\n");
-			t->std = V4L2_STD_SECAM_B |
-				 V4L2_STD_SECAM_G |
-				 V4L2_STD_SECAM_H;
-			break;
+			return V4L2_STD_SECAM_B |
+			       V4L2_STD_SECAM_G |
+			       V4L2_STD_SECAM_H;
 		case 'd':
 		case 'D':
 		case 'k':
 		case 'K':
-			tuner_dbg("insmod fixup: SECAM => SECAM-DK\n");
-			t->std = V4L2_STD_SECAM_DK;
-			break;
+			return V4L2_STD_SECAM_DK;
 		case 'l':
 		case 'L':
-			if ((secam[1] == 'C') || (secam[1] == 'c')) {
-				tuner_dbg("insmod fixup: SECAM => SECAM-L'\n");
-				t->std = V4L2_STD_SECAM_LC;
-			} else {
-				tuner_dbg("insmod fixup: SECAM => SECAM-L\n");
-				t->std = V4L2_STD_SECAM_L;
-			}
-			break;
-		case '-':
-			/* default parameter, do nothing */
-			break;
+			if ((secam[1] == 'C') || (secam[1] == 'c'))
+				return V4L2_STD_SECAM_LC;
+			return V4L2_STD_SECAM_L;
 		default:
 			tuner_warn("secam= argument not recognised\n");
 			break;
 		}
 	}
 
-	if ((t->std & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
+	if (ntsc[0] != '-' && (std & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
 		switch (ntsc[0]) {
 		case 'm':
 		case 'M':
-			tuner_dbg("insmod fixup: NTSC => NTSC-M\n");
-			t->std = V4L2_STD_NTSC_M;
-			break;
+			return V4L2_STD_NTSC_M;
 		case 'j':
 		case 'J':
-			tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
-			t->std = V4L2_STD_NTSC_M_JP;
-			break;
+			return V4L2_STD_NTSC_M_JP;
 		case 'k':
 		case 'K':
-			tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
-			t->std = V4L2_STD_NTSC_M_KR;
-			break;
-		case '-':
-			/* default parameter, do nothing */
-			break;
+			return V4L2_STD_NTSC_M_KR;
 		default:
 			tuner_info("ntsc= argument not recognised\n");
 			break;
 		}
 	}
-	return 0;
+	return std;
 }
 
 /*
@@ -1102,8 +1064,9 @@ static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 	if (set_mode(t, V4L2_TUNER_ANALOG_TV))
 		return 0;
 
-	t->std = std;
-	tuner_fixup_std(t);
+	t->std = tuner_fixup_std(t, std);
+	if (t->std != std)
+		tuner_dbg("Fixup standard %llx to %llx\n", std, t->std);
 	set_freq(t, 0);
 	return 0;
 }
-- 
cgit v1.2.3-58-ga151


From a6cf90a91551c767bed78a4418c26f41aed60cde Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Tue, 14 Jun 2011 04:03:26 -0300
Subject: [media] v4l2-ioctl.c: check for valid tuner type in S_HW_FREQ_SEEK

Prohibit attempts to change the tuner to a type that is different
from the device node the ioctl is called from. I.e. the type must
be RADIO for a radio node and ANALOG_TV for a video/vbi node.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-ioctl.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index a2e442ab8a5b..69e8c6ffcc49 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1946,13 +1946,19 @@ static long __video_do_ioctl(struct file *file,
 	case VIDIOC_S_HW_FREQ_SEEK:
 	{
 		struct v4l2_hw_freq_seek *p = arg;
+		enum v4l2_tuner_type type;
 
 		if (!ops->vidioc_s_hw_freq_seek)
 			break;
+		type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		dbgarg(cmd,
-			"tuner=%d, type=%d, seek_upward=%d, wrap_around=%d\n",
-			p->tuner, p->type, p->seek_upward, p->wrap_around);
-		ret = ops->vidioc_s_hw_freq_seek(file, fh, p);
+			"tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u\n",
+			p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing);
+		if (p->type != type)
+			ret = -EINVAL;
+		else
+			ret = ops->vidioc_s_hw_freq_seek(file, fh, p);
 		break;
 	}
 	case VIDIOC_ENUM_FRAMESIZES:
-- 
cgit v1.2.3-58-ga151


From d16625e788b8871163ad991851ffba5f64c06d43 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Sat, 25 Jun 2011 10:24:49 -0300
Subject: [media] tuner-core: power up tuner when called with s_power(1)

Drivers must be able to rely on s_power to power up subdevices.

Note that at this moment no driver attempts to power up tuners. This probably
isn't surprising since s_power(1) was never implemented in tuner-core.c until
now.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tuner-core.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 1e7505eb32e9..39af999112f9 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1039,16 +1039,20 @@ static int tuner_s_radio(struct v4l2_subdev *sd)
 /**
  * tuner_s_power - controls the power state of the tuner
  * @sd: pointer to struct v4l2_subdev
- * @on: a zero value puts the tuner to sleep
+ * @on: a zero value puts the tuner to sleep, non-zero wakes it up
  */
 static int tuner_s_power(struct v4l2_subdev *sd, int on)
 {
 	struct tuner *t = to_tuner(sd);
 	struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
 
-	/* FIXME: Why this function don't wake the tuner if on != 0 ? */
-	if (on)
+	if (on) {
+		if (t->standby && set_mode(t, t->mode) == 0) {
+			tuner_dbg("Waking up tuner\n");
+			set_freq(t, 0);
+		}
 		return 0;
+	}
 
 	tuner_dbg("Putting tuner to sleep\n");
 	t->standby = true;
-- 
cgit v1.2.3-58-ga151


From d118e294e27000bfd728308d7b74ba67350e779c Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Sat, 25 Jun 2011 10:28:21 -0300
Subject: [media] cx18/ivtv: fix g_tuner support

The driver shouldn't override vt->type, and the tuner name should be
based on vt->type as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-ioctl.c | 8 ++------
 drivers/media/video/ivtv/ivtv-ioctl.c | 8 ++------
 2 files changed, 4 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 1933d4d11bf2..e80134f52ef5 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -695,14 +695,10 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
 
 	cx18_call_all(cx, tuner, g_tuner, vt);
 
-	if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
+	if (vt->type == V4L2_TUNER_RADIO)
 		strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name));
-		vt->type = V4L2_TUNER_RADIO;
-	} else {
+	else
 		strlcpy(vt->name, "cx18 TV Tuner", sizeof(vt->name));
-		vt->type = V4L2_TUNER_ANALOG_TV;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index f9e347dae739..120c7d8e0895 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -1184,14 +1184,10 @@ static int ivtv_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
 
 	ivtv_call_all(itv, tuner, g_tuner, vt);
 
-	if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) {
+	if (vt->type == V4L2_TUNER_RADIO)
 		strlcpy(vt->name, "ivtv Radio Tuner", sizeof(vt->name));
-		vt->type = V4L2_TUNER_RADIO;
-	} else {
+	else
 		strlcpy(vt->name, "ivtv TV Tuner", sizeof(vt->name));
-		vt->type = V4L2_TUNER_ANALOG_TV;
-	}
-
 	return 0;
 }
 
-- 
cgit v1.2.3-58-ga151


From 5ad339a29858db6544052f98973d235129f9f49c Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Sun, 26 Jun 2011 05:35:34 -0300
Subject: [media] tuner-core.c: don't change type field in g_tuner or
 g_frequency

The tuner core should not silently change the type field in g_tuner and
g_frequency. If the tuner is in a different mode than the one that was
requested, then just fill in what you can and don't attempt to read afc,
signal or rxsubchans values.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tuner-core.c | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 39af999112f9..cfa9f7efe93d 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1101,8 +1101,7 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
 
 	if (check_mode(t, f->type) == -EINVAL)
 		return 0;
-	f->type = t->mode;
-	if (fe_tuner_ops->get_frequency && !t->standby) {
+	if (f->type == t->mode && fe_tuner_ops->get_frequency && !t->standby) {
 		u32 abs_freq;
 
 		fe_tuner_ops->get_frequency(&t->fe, &abs_freq);
@@ -1110,7 +1109,7 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
 			DIV_ROUND_CLOSEST(abs_freq * 2, 125) :
 			DIV_ROUND_CLOSEST(abs_freq, 62500);
 	} else {
-		f->frequency = (V4L2_TUNER_RADIO == t->mode) ?
+		f->frequency = (V4L2_TUNER_RADIO == f->type) ?
 			t->radio_freq : t->tv_freq;
 	}
 	return 0;
@@ -1134,32 +1133,33 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 
 	if (check_mode(t, vt->type) == -EINVAL)
 		return 0;
-	vt->type = t->mode;
-	if (analog_ops->get_afc)
+	if (vt->type == t->mode && analog_ops->get_afc)
 		vt->afc = analog_ops->get_afc(&t->fe);
-	if (t->mode == V4L2_TUNER_ANALOG_TV)
+	if (vt->type == V4L2_TUNER_ANALOG_TV)
 		vt->capability |= V4L2_TUNER_CAP_NORM;
-	if (t->mode != V4L2_TUNER_RADIO) {
+	if (vt->type != V4L2_TUNER_RADIO) {
 		vt->rangelow = tv_range[0] * 16;
 		vt->rangehigh = tv_range[1] * 16;
 		return 0;
 	}
 
 	/* radio mode */
-	vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
-	if (fe_tuner_ops->get_status) {
-		u32 tuner_status;
-
-		fe_tuner_ops->get_status(&t->fe, &tuner_status);
-		vt->rxsubchans =
-			(tuner_status & TUNER_STATUS_STEREO) ?
-			V4L2_TUNER_SUB_STEREO :
-			V4L2_TUNER_SUB_MONO;
+	if (vt->type == t->mode) {
+		vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
+		if (fe_tuner_ops->get_status) {
+			u32 tuner_status;
+
+			fe_tuner_ops->get_status(&t->fe, &tuner_status);
+			vt->rxsubchans =
+				(tuner_status & TUNER_STATUS_STEREO) ?
+				V4L2_TUNER_SUB_STEREO :
+				V4L2_TUNER_SUB_MONO;
+		}
+		if (analog_ops->has_signal)
+			vt->signal = analog_ops->has_signal(&t->fe);
+		vt->audmode = t->audmode;
 	}
-	if (analog_ops->has_signal)
-		vt->signal = analog_ops->has_signal(&t->fe);
 	vt->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
-	vt->audmode = t->audmode;
 	vt->rangelow = radio_range[0] * 16000;
 	vt->rangehigh = radio_range[1] * 16000;
 
-- 
cgit v1.2.3-58-ga151


From ddc6ff31cc22720c46c1547a5310ea260a968ae9 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Sun, 26 Jun 2011 06:16:03 -0300
Subject: [media] msp3400: fill in v4l2_tuner based on vt->type field

The vt->type field determines how the msp3400 should fill in the
tuner data, not whether the msp3400 is in radio mode or not.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/msp3400-driver.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index de5d481b0328..c43c81f5f978 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -480,12 +480,14 @@ static int msp_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 	struct msp_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-	if (state->radio)
+	if (vt->type != V4L2_TUNER_ANALOG_TV)
 		return 0;
-	if (state->opmode == OPMODE_AUTOSELECT)
-		msp_detect_stereo(client);
-	vt->audmode    = state->audmode;
-	vt->rxsubchans = state->rxsubchans;
+	if (!state->radio) {
+		if (state->opmode == OPMODE_AUTOSELECT)
+			msp_detect_stereo(client);
+		vt->rxsubchans = state->rxsubchans;
+	}
+	vt->audmode = state->audmode;
 	vt->capability |= V4L2_TUNER_CAP_STEREO |
 		V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
 	return 0;
-- 
cgit v1.2.3-58-ga151


From d7515b8866b60c9526d2d7af37ebcd16c3c5ed97 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Wed, 29 Jun 2011 18:36:19 -0300
Subject: [media] Revert "V4L/DVB: cx23885: Enable Message Signaled
 Interrupts(MSI)"

This reverts commit e38030f3ff02684eb9e25e983a03ad318a10a2ea.

MSI flat-out doesn't work right on cx2388x devices yet. There are now
multiple reports of cards that hard-lock systems when MSI is enabled,
including my own HVR-1250 when trying to use its built-in IR receiver.
Disable MSI and it works just fine. Similar for another user's HVR-1270.
Issues have also been reported with the HVR-1850 when MSI is enabled,
and the 1850 behavior sounds similar to an as-yet-undiagnosed issue I've
seen with an 1800.

CC: stable@kernel.org
CC: Steven Toth <stoth@kernellabs.com>
CC: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cx23885-core.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 64d9b2136ff6..419777a832ee 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -2060,12 +2060,8 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
 		goto fail_irq;
 	}
 
-	if (!pci_enable_msi(pci_dev))
-		err = request_irq(pci_dev->irq, cx23885_irq,
-				  IRQF_DISABLED, dev->name, dev);
-	else
-		err = request_irq(pci_dev->irq, cx23885_irq,
-				  IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+	err = request_irq(pci_dev->irq, cx23885_irq,
+			  IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
 	if (err < 0) {
 		printk(KERN_ERR "%s: can't get IRQ %d\n",
 		       dev->name, pci_dev->irq);
@@ -2114,7 +2110,6 @@ static void __devexit cx23885_finidev(struct pci_dev *pci_dev)
 
 	/* unregister stuff */
 	free_irq(pci_dev->irq, dev);
-	pci_disable_msi(pci_dev);
 
 	cx23885_dev_unregister(dev);
 	v4l2_device_unregister(v4l2_dev);
-- 
cgit v1.2.3-58-ga151


From f3e456cb899304bed183247ed3228f7ff855eebd Mon Sep 17 00:00:00 2001
From: Rafi Rubin <rafi@seas.upenn.edu>
Date: Sun, 3 Jul 2011 17:13:52 -0300
Subject: [media] mceusb: Timeout unit corrections

Unit missmatch in mceusb_handle_command.  It should be converting to us,
not 1/10th of ms.

mceusb_dev_printdata 100us/ms -> 1000us/ms

Alter format of fix slightly and update comment to match proper reality.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 06dfe0957b5e..b928a61736d7 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -558,9 +558,10 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
 				 inout, data1);
 			break;
 		case MCE_CMD_S_TIMEOUT:
-			/* value is in units of 50us, so x*50/100 or x/2 ms */
+			/* value is in units of 50us, so x*50/1000 ms */
 			dev_info(dev, "%s receive timeout of %d ms\n",
-				 inout, ((data1 << 8) | data2) / 2);
+				 inout,
+				 ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000);
 			break;
 		case MCE_CMD_G_TIMEOUT:
 			dev_info(dev, "Get receive timeout\n");
@@ -847,7 +848,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index)
 	switch (ir->buf_in[index]) {
 	/* 2-byte return value commands */
 	case MCE_CMD_S_TIMEOUT:
-		ir->rc->timeout = US_TO_NS((hi << 8 | lo) / 2);
+		ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT);
 		break;
 
 	/* 1-byte return value commands */
-- 
cgit v1.2.3-58-ga151


From 9824ae4aff2793947ea78c4c8147bb6c59efdcba Mon Sep 17 00:00:00 2001
From: Rafi Rubin <rafi@seas.upenn.edu>
Date: Sun, 3 Jul 2011 17:13:53 -0300
Subject: [media] mceusb: increase default timeout to 100ms

This matches the typical timeout advertised by hardware, once we're
actually interpreting it correctly.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index b928a61736d7..ec972dc25790 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1079,7 +1079,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 	rc->priv = ir;
 	rc->driver_type = RC_DRIVER_IR_RAW;
 	rc->allowed_protos = RC_TYPE_ALL;
-	rc->timeout = US_TO_NS(1000);
+	rc->timeout = MS_TO_NS(100);
 	if (!ir->flags.no_tx) {
 		rc->s_tx_mask = mceusb_set_tx_mask;
 		rc->s_tx_carrier = mceusb_set_tx_carrier;
-- 
cgit v1.2.3-58-ga151


From d7b290a1056c5564eec8a1b169c6e84ff3f54c13 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Mon, 11 Jul 2011 12:09:00 -0300
Subject: [media] nuvoton-cir: make idle timeout more sane

The nuvoton-cir inherited an insanely low idle timeout value from the
mceusb driver. We're fixing mceusb, should fix this driver too.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/nuvoton-cir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 565f24c20d77..ce595f9ab4c7 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -1110,7 +1110,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
 	rdev->dev.parent = &pdev->dev;
 	rdev->driver_name = NVT_DRIVER_NAME;
 	rdev->map_name = RC_MAP_RC6_MCE;
-	rdev->timeout = US_TO_NS(1000);
+	rdev->timeout = MS_TO_NS(100);
 	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
 	rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
 #if 0
-- 
cgit v1.2.3-58-ga151


From 4756fc64ecd628efa6f8296711d7dbcefabf25dd Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Fri, 24 Jun 2011 10:30:09 -0300
Subject: [media] MEDIA: Fix non-ISA_DMA_API link failure of sound code
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

sound/isa/es18xx.c: In function ‘snd_es18xx_playback1_prepare’:
sound/isa/es18xx.c:501:9: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
sound/isa/es18xx.c: In function ‘snd_es18xx_playback_pointer’:
sound/isa/es18xx.c:818:3: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [sound/isa/es18xx.o] Error 1
sound/isa/sscape.c: In function ‘upload_dma_data’:
sound/isa/sscape.c:481:3: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [sound/isa/sscape.o] Error 1
sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_playback_prepare’:
sound/isa/ad1816a/ad1816a_lib.c:244:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_playback_pointer’:
sound/isa/ad1816a/ad1816a_lib.c:302:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration]
sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_free’:
sound/isa/ad1816a/ad1816a_lib.c:544:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [sound/isa/ad1816a/ad1816a_lib.o] Error 1
make[3]: Target `__build' not remade because of errors.
make[2]: *** [sound/isa/ad1816a] Error 2
sound/isa/es1688/es1688_lib.c: In function ‘snd_es1688_playback_prepare’:
sound/isa/es1688/es1688_lib.c:417:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
sound/isa/es1688/es1688_lib.c: In function ‘snd_es1688_playback_pointer’:
sound/isa/es1688/es1688_lib.c:509:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [sound/isa/es1688/es1688_lib.o] Error 1
make[3]: Target `__build' not remade because of errors.
make[2]: *** [sound/isa/es1688] Error 2
sound/isa/gus/gus_dma.c: In function ‘snd_gf1_dma_program’:
sound/isa/gus/gus_dma.c:79:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
sound/isa/gus/gus_dma.c: In function ‘snd_gf1_dma_done’:
sound/isa/gus/gus_dma.c:177:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [sound/isa/gus/gus_dma.o] Error 1
sound/isa/gus/gus_pcm.c: In function ‘snd_gf1_pcm_capture_prepare’:
sound/isa/gus/gus_pcm.c:591:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
sound/isa/gus/gus_pcm.c: In function ‘snd_gf1_pcm_capture_pointer’:
sound/isa/gus/gus_pcm.c:619:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [sound/isa/gus/gus_pcm.o] Error 1
make[3]: Target `__build' not remade because of errors.
make[2]: *** [sound/isa/gus] Error 2
sound/isa/sb/sb16_csp.c: In function ‘snd_sb_csp_ioctl’:
sound/isa/sb/sb16_csp.c:228:227: error: case label does not reduce to an integer constant
make[3]: *** [sound/isa/sb/sb16_csp.o] Error 1
sound/isa/sb/sb16_main.c: In function ‘snd_sb16_playback_prepare’:
sound/isa/sb/sb16_main.c:276:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
sound/isa/sb/sb16_main.c: In function ‘snd_sb16_playback_pointer’:
sound/isa/sb/sb16_main.c:456:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [sound/isa/sb/sb16_main.o] Error 1
sound/isa/sb/sb8_main.c: In function ‘snd_sb8_playback_prepare’:
sound/isa/sb/sb8_main.c:172:3: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
sound/isa/sb/sb8_main.c: In function ‘snd_sb8_playback_pointer’:
sound/isa/sb/sb8_main.c:425:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [sound/isa/sb/sb8_main.o] Error 1
make[3]: Target `__build' not remade because of errors.
make[2]: *** [sound/isa/sb] Error 2
sound/isa/wss/wss_lib.c: In function ‘snd_wss_playback_prepare’:
sound/isa/wss/wss_lib.c:1025:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration]
sound/isa/wss/wss_lib.c: In function ‘snd_wss_playback_pointer’:
sound/isa/wss/wss_lib.c:1160:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration]
sound/isa/wss/wss_lib.c: In function ‘snd_wss_free’:
sound/isa/wss/wss_lib.c:1695:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [sound/isa/wss/wss_lib.o] Error 1
warning: (RADIO_MIROPCM20) selects SND_ISA which has unmet direct dependencies (SOUND && !M68K && SND && ISA && ISA_DMA_API)

A build with ISA && ISA_DMA && !ISA_DMA_API results in:
  CC      sound/isa/es18xx.o
  CC      sound/isa/sscape.o
  CC      sound/isa/ad1816a/ad1816a_lib.o
  CC      sound/isa/es1688/es1688_lib.o
  CC      sound/isa/gus/gus_dma.o
  CC      sound/isa/gus/gus_pcm.o
  CC      sound/isa/sb/sb16_csp.o
  CC      sound/isa/sb/sb16_main.o
  CC      sound/isa/sb/sb8_main.o
  CC      sound/isa/wss/wss_lib.o

The root cause for this is hidden in this Kconfig warning:

Adding a dependency on ISA_DMA_API to RADIO_MIROPCM20 fixes these issues.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index e4c97fd6f05a..0aeed28e54fd 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -168,7 +168,7 @@ config RADIO_MAXIRADIO
 
 config RADIO_MIROPCM20
 	tristate "miroSOUND PCM20 radio"
-	depends on ISA && VIDEO_V4L2 && SND
+	depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
 	select SND_ISA
 	select SND_MIRO
 	---help---
-- 
cgit v1.2.3-58-ga151


From 42a741dcf1472cea55193ea8611db3d67808ce22 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 30 Jun 2011 14:31:04 -0300
Subject: [media] media: fix radio-sf16fmr2 build when SND is not enabled

When CONFIG_SND is not enabled, radio-sf16fmr2 build fails with:

so make this driver depend on SND.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 0aeed28e54fd..52798a111e16 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -201,7 +201,7 @@ config RADIO_SF16FMI
 
 config RADIO_SF16FMR2
 	tristate "SF16FMR2 Radio"
-	depends on ISA && VIDEO_V4L2
+	depends on ISA && VIDEO_V4L2 && SND
 	---help---
 	  Choose Y here if you have one of these FM radio cards.
 
-- 
cgit v1.2.3-58-ga151


From 2d1969312d6319d28ae9609a84f969b6933bd51c Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Mon, 4 Jul 2011 21:55:01 -0300
Subject: [media] dvb_frontend: fix race condition in stopping/starting
 frontend

Attached is a patch which addresses a race condition in the DVB core
related to closing/reopening the DVB frontend device in quick
succession.  This is the reason that devices such as the HVR-1300,
HVR-3000, and HVR-4000 have been failing to scan properly under MythTV
and w_scan.

The gory details of the race are described in the patch.

Devin

There is a race condition exhibited when channel scanners such as w_scan and
MythTV quickly close and then reopen the frontend device node.

Under normal conditions, the behavior is as follows:

1.  Application closes the device node
2.  DVB frontend ioctl calls dvb_frontend_release which sets
    fepriv->release_jiffies
3.  DVB frontend thread *eventually* calls dvb_frontend_is_exiting() which
    compares fepriv->release_jiffies, and shuts down the thread if timeout has
    expired
4.  Thread goes away
5.  Application opens frontend device
6.  DVB frontend ioctl() calls ts_bus_ctrl(1)
7.  DVB frontend ioctl() creates new frontend thread, which calls
    dvb_frontend_init(), which has demod driver init() routine setup initial
    register state for demod chip.
8.  Tuning request is issued.

The race occurs when the application in step 5 performs the new open() call
before the frontend thread is shutdown.  In this case the ts_bus_ctrl() call
is made, which strobes the RESET pin on the demodulator, but the
dvb_frontend_init() function never gets called because the frontend thread
hasn't gone away yet.  As a result, the initial register config for the demod
is *never* setup, causing subsequent tuning requests to fail.

If there is time between the close and open (enough for the dvb frontend
thread to be torn down), then in that case the new frontend thread is created
and thus the dvb_frontend_init() function does get called.

The fix is to set the flag which forces reinitialization if we did in fact
call ts_bus_ctrl().

This problem has been seen on the HVR-1300, HVR-3000, and HVR-4000, and is
likely occuring on other designs as well where ts_bus_ctrl() actually strobes
the reset pin on the demodulator.

Note that this patch should supercede any patches submitted for the
1300/3000/4000 which remove the code that removes GPIO code in
cx8802_dvb_advise_acquire(), which have been circulating by users for some
time now...

Canonical tracking this issue in Launchpad 439163:

Thanks to Jon Sayers from Hauppauge and Florent Audebert from Anevia S.A. for
providing hardware to test/debug with.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Jon Sayers <j.sayers@hauppauge.co.uk>
Cc: Florent Audebert <florent.audebert@anevia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-core/dvb_frontend.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 98278041d75f..5b6b451d4694 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1988,6 +1988,14 @@ static int dvb_frontend_open(struct inode *inode, struct file *file)
 	if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) {
 		if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0)
 			goto err0;
+
+		/* If we took control of the bus, we need to force
+		   reinitialization.  This is because many ts_bus_ctrl()
+		   functions strobe the RESET pin on the demod, and if the
+		   frontend thread already exists then the dvb_init() routine
+		   won't get called (which is what usually does initial
+		   register configuration). */
+		fepriv->reinitialise = 1;
 	}
 
 	if ((ret = dvb_generic_open (inode, file)) < 0)
-- 
cgit v1.2.3-58-ga151


From a1ad5ec7f520c559becab2e989a397f1d6ac5eb0 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 13 Jul 2011 01:23:11 -0300
Subject: [media] tuner-core: fix a 2.6.39 regression with mt20xx

As Simon reported, digital TV broke with mt20xx tuner due to
commit ad020dc2fe9039628cf6cef42cd1b76531ee8411.

The mt20xx tuner passes V4L2_TUNER_DIGITAL_TV to tuner core. However, the
check_mode code now doesn't handle it well. Change the logic there to
avoid the breakage, and fix a test for analog-only at g_tuner.

Reported-by: Simon Arlott <simon@fire.lp0.eu>
Tested-by: Simon Arlott <simon@fire.lp0.eu>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tuner-core.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index cfa9f7efe93d..a03945ab9f08 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -714,10 +714,19 @@ static int tuner_remove(struct i2c_client *client)
  * returns 0.
  * This function is needed for boards that have a separate tuner for
  * radio (like devices with tea5767).
+ * NOTE: mt20xx uses V4L2_TUNER_DIGITAL_TV and calls set_tv_freq to
+ *       select a TV frequency. So, t_mode = T_ANALOG_TV could actually
+ *	 be used to represent a Digital TV too.
  */
 static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode)
 {
-	if ((1 << mode & t->mode_mask) == 0)
+	int t_mode;
+	if (mode == V4L2_TUNER_RADIO)
+		t_mode = T_RADIO;
+	else
+		t_mode = T_ANALOG_TV;
+
+	if ((t_mode & t->mode_mask) == 0)
 		return -EINVAL;
 
 	return 0;
@@ -984,7 +993,7 @@ static void tuner_status(struct dvb_frontend *fe)
 	case V4L2_TUNER_RADIO:
 		p = "radio";
 		break;
-	case V4L2_TUNER_DIGITAL_TV:
+	case V4L2_TUNER_DIGITAL_TV: /* Used by mt20xx */
 		p = "digital TV";
 		break;
 	case V4L2_TUNER_ANALOG_TV:
@@ -1135,9 +1144,8 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 		return 0;
 	if (vt->type == t->mode && analog_ops->get_afc)
 		vt->afc = analog_ops->get_afc(&t->fe);
-	if (vt->type == V4L2_TUNER_ANALOG_TV)
+	if (t->mode != V4L2_TUNER_RADIO) {
 		vt->capability |= V4L2_TUNER_CAP_NORM;
-	if (vt->type != V4L2_TUNER_RADIO) {
 		vt->rangelow = tv_range[0] * 16;
 		vt->rangehigh = tv_range[1] * 16;
 		return 0;
-- 
cgit v1.2.3-58-ga151


From dc6b845044ccb7e9e6f3b7e71bd179b3cf0223b6 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 17 Jul 2011 00:24:37 -0300
Subject: si4713-i2c: avoid potential buffer overflow on si4713
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

While compiling it with Fedora 15, I noticed this issue:

  inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24:
  arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct

Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Reviewed-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/media/radio/si4713-i2c.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index deca2e06ff22..c9f4a8e65dc4 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -1033,7 +1033,7 @@ static int si4713_write_econtrol_string(struct si4713_device *sdev,
 		char ps_name[MAX_RDS_PS_NAME + 1];
 
 		len = control->size - 1;
-		if (len > MAX_RDS_PS_NAME) {
+		if (len < 0 || len > MAX_RDS_PS_NAME) {
 			rval = -ERANGE;
 			goto exit;
 		}
@@ -1057,7 +1057,7 @@ static int si4713_write_econtrol_string(struct si4713_device *sdev,
 		char radio_text[MAX_RDS_RADIO_TEXT + 1];
 
 		len = control->size - 1;
-		if (len > MAX_RDS_RADIO_TEXT) {
+		if (len < 0 || len > MAX_RDS_RADIO_TEXT) {
 			rval = -ERANGE;
 			goto exit;
 		}
-- 
cgit v1.2.3-58-ga151