From d825a49259a272d2451f0bfb0f789534377ac478 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 15 Jul 2007 19:58:24 -0400 Subject: [ISDN] HiSax bkm_a4t: split setup into two smaller functions No behavior changes, just code movement. Prep for PCI hotplug API. Well, CONFIG_PCI useless ifdef was removed. Signed-off-by: Jeff Garzik --- drivers/isdn/hisax/bkm_a4t.c | 108 +++++++++++++++++++++++++------------------ 1 file changed, 63 insertions(+), 45 deletions(-) (limited to 'drivers/isdn/hisax') diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c index 871310d56a6e..3d1bdc8431ad 100644 --- a/drivers/isdn/hisax/bkm_a4t.c +++ b/drivers/isdn/hisax/bkm_a4t.c @@ -255,54 +255,38 @@ BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg) return (0); } -static struct pci_dev *dev_a4t __devinitdata = NULL; +static int __devinit a4t_pci_probe(struct pci_dev *dev_a4t, + struct IsdnCardState *cs, + u_int *found, + u_int *pci_memaddr) +{ + u16 sub_sys; + u16 sub_vendor; + + sub_vendor = dev_a4t->subsystem_vendor; + sub_sys = dev_a4t->subsystem_device; + if ((sub_sys == PCI_DEVICE_ID_BERKOM_A4T) && (sub_vendor == PCI_VENDOR_ID_BERKOM)) { + if (pci_enable_device(dev_a4t)) + return (0); /* end loop & function */ + *found = 1; + *pci_memaddr = pci_resource_start(dev_a4t, 0); + cs->irq = dev_a4t->irq; + return (1); /* end loop */ + } -int __devinit -setup_bkm_a4t(struct IsdnCard *card) + return (-1); /* continue looping */ +} + +static int __devinit a4t_cs_init(struct IsdnCard *card, + struct IsdnCardState *cs, + u_int pci_memaddr) { - struct IsdnCardState *cs = card->cs; - char tmp[64]; - u_int pci_memaddr = 0, found = 0; I20_REGISTER_FILE *pI20_Regs; -#ifdef CONFIG_PCI -#endif - - strcpy(tmp, bkm_a4t_revision); - printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp)); - if (cs->typ == ISDN_CTYPE_BKM_A4T) { - cs->subtyp = BKM_A4T; - } else - return (0); -#ifdef CONFIG_PCI - while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN, - PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) { - u16 sub_sys; - u16 sub_vendor; - - sub_vendor = dev_a4t->subsystem_vendor; - sub_sys = dev_a4t->subsystem_device; - if ((sub_sys == PCI_DEVICE_ID_BERKOM_A4T) && (sub_vendor == PCI_VENDOR_ID_BERKOM)) { - if (pci_enable_device(dev_a4t)) - return(0); - found = 1; - pci_memaddr = pci_resource_start(dev_a4t, 0); - cs->irq = dev_a4t->irq; - break; - } - } - if (!found) { - printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]); - return (0); - } if (!cs->irq) { /* IRQ range check ?? */ printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]); return (0); } - if (!pci_memaddr) { - printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]); - return (0); - } cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096); /* Check suspecious address */ pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base); @@ -317,11 +301,7 @@ setup_bkm_a4t(struct IsdnCard *card) cs->hw.ax.jade_adr = cs->hw.ax.base + PO_OFFSET; cs->hw.ax.isac_ale = GCS_1; cs->hw.ax.jade_ale = GCS_3; -#else - printk(KERN_WARNING "HiSax: %s: NO_PCI_BIOS\n", CardType[card->typ]); - printk(KERN_WARNING "HiSax: %s: unable to configure\n", CardType[card->typ]); - return (0); -#endif /* CONFIG_PCI */ + printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n", CardType[card->typ], cs->hw.ax.base, cs->irq); @@ -339,5 +319,43 @@ setup_bkm_a4t(struct IsdnCard *card) ISACVersion(cs, "Telekom A4T:"); /* Jade version */ JadeVersion(cs, "Telekom A4T:"); + return (1); } + +static struct pci_dev *dev_a4t __devinitdata = NULL; + +int __devinit +setup_bkm_a4t(struct IsdnCard *card) +{ + struct IsdnCardState *cs = card->cs; + char tmp[64]; + u_int pci_memaddr = 0, found = 0; + int ret; + + strcpy(tmp, bkm_a4t_revision); + printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp)); + if (cs->typ == ISDN_CTYPE_BKM_A4T) { + cs->subtyp = BKM_A4T; + } else + return (0); + + while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN, + PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) { + ret = a4t_pci_probe(dev_a4t, cs, &found, &pci_memaddr); + if (!ret) + return (0); + if (ret > 0) + break; + } + if (!found) { + printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]); + return (0); + } + if (!pci_memaddr) { + printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]); + return (0); + } + + return a4t_cs_init(card, cs, pci_memaddr); +} -- cgit v1.2.3-58-ga151