From 0a90448ead4a7683f9064852a8bb4150639d0fd2 Mon Sep 17 00:00:00 2001 From: Florian Echtler Date: Thu, 8 Feb 2018 03:43:03 -0500 Subject: media: add missing blob structure field for tag id The SUR40 can recognize specific printed patterns directly in hardware; this information (i.e. the pattern id) is present but currently unused in the blob structure. Signed-off-by: Florian Echtler Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/input/touchscreen/sur40.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index f16f8358c70a..8375b06ba837 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -81,7 +81,10 @@ struct sur40_blob { __le32 area; /* size in pixels/pressure (?) */ - u8 padding[32]; + u8 padding[24]; + + __le32 tag_id; /* valid when type == 0x04 (SUR40_TAG) */ + __le32 unknown; } __packed; -- cgit v1.2.3-58-ga151 From 4e6c55814897e7048c6d5dd0bb07725a4051d633 Mon Sep 17 00:00:00 2001 From: Florian Echtler Date: Thu, 8 Feb 2018 03:43:04 -0500 Subject: media: add default settings and module parameters for video controls This patch adds parameter definitions and module parameters for the four userspace controls that the SUR40 can currently provide. Signed-off-by: Florian Echtler Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/input/touchscreen/sur40.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index 8375b06ba837..45ad5746aad8 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -149,6 +149,40 @@ struct sur40_image_header { #define SUR40_TOUCH 0x02 #define SUR40_TAG 0x04 +/* video controls */ +#define SUR40_BRIGHTNESS_MAX 0xff +#define SUR40_BRIGHTNESS_MIN 0x00 +#define SUR40_BRIGHTNESS_DEF 0xff + +#define SUR40_CONTRAST_MAX 0x0f +#define SUR40_CONTRAST_MIN 0x00 +#define SUR40_CONTRAST_DEF 0x0a + +#define SUR40_GAIN_MAX 0x09 +#define SUR40_GAIN_MIN 0x00 +#define SUR40_GAIN_DEF 0x08 + +#define SUR40_BACKLIGHT_MAX 0x01 +#define SUR40_BACKLIGHT_MIN 0x00 +#define SUR40_BACKLIGHT_DEF 0x01 + +#define sur40_str(s) #s +#define SUR40_PARAM_RANGE(lo, hi) " (range " sur40_str(lo) "-" sur40_str(hi) ")" + +/* module parameters */ +static uint brightness = SUR40_BRIGHTNESS_DEF; +module_param(brightness, uint, 0644); +MODULE_PARM_DESC(brightness, "set initial brightness" + SUR40_PARAM_RANGE(SUR40_BRIGHTNESS_MIN, SUR40_BRIGHTNESS_MAX)); +static uint contrast = SUR40_CONTRAST_DEF; +module_param(contrast, uint, 0644); +MODULE_PARM_DESC(contrast, "set initial contrast" + SUR40_PARAM_RANGE(SUR40_CONTRAST_MIN, SUR40_CONTRAST_MAX)); +static uint gain = SUR40_GAIN_DEF; +module_param(gain, uint, 0644); +MODULE_PARM_DESC(gain, "set initial gain" + SUR40_PARAM_RANGE(SUR40_GAIN_MIN, SUR40_GAIN_MAX)); + static const struct v4l2_pix_format sur40_pix_format[] = { { .pixelformat = V4L2_TCH_FMT_TU08, -- cgit v1.2.3-58-ga151 From bbc0c4eb6b6b6bd5f5a83caa99d221a85f3063eb Mon Sep 17 00:00:00 2001 From: Florian Echtler Date: Thu, 8 Feb 2018 03:43:05 -0500 Subject: media: add panel register access functions These functions provide write access to the internal LCD panel registers which also control the sensor. They can be used to disable the preprocessor, set the illumination brightness, and adjust gain/contrast (which are stored together in one register internally called "vsvideo"). Signed-off-by: Florian Echtler Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/input/touchscreen/sur40.c | 75 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index 45ad5746aad8..3b56f7d05ec5 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -257,6 +257,81 @@ static int sur40_command(struct sur40_state *dev, 0x00, index, buffer, size, 1000); } +/* poke a byte in the panel register space */ +static int sur40_poke(struct sur40_state *dev, u8 offset, u8 value) +{ + int result; + u8 index = 0x96; // 0xae for permanent write + + result = usb_control_msg(dev->usbdev, usb_sndctrlpipe(dev->usbdev, 0), + SUR40_POKE, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x32, index, NULL, 0, 1000); + if (result < 0) + goto error; + msleep(5); + + result = usb_control_msg(dev->usbdev, usb_sndctrlpipe(dev->usbdev, 0), + SUR40_POKE, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x72, offset, NULL, 0, 1000); + if (result < 0) + goto error; + msleep(5); + + result = usb_control_msg(dev->usbdev, usb_sndctrlpipe(dev->usbdev, 0), + SUR40_POKE, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0xb2, value, NULL, 0, 1000); + if (result < 0) + goto error; + msleep(5); + +error: + return result; +} + +static int sur40_set_preprocessor(struct sur40_state *dev, u8 value) +{ + u8 setting_07[2] = { 0x01, 0x00 }; + u8 setting_17[2] = { 0x85, 0x80 }; + int result; + + if (value > 1) + return -ERANGE; + + result = usb_control_msg(dev->usbdev, usb_sndctrlpipe(dev->usbdev, 0), + SUR40_POKE, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x07, setting_07[value], NULL, 0, 1000); + if (result < 0) + goto error; + msleep(5); + + result = usb_control_msg(dev->usbdev, usb_sndctrlpipe(dev->usbdev, 0), + SUR40_POKE, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x17, setting_17[value], NULL, 0, 1000); + if (result < 0) + goto error; + msleep(5); + +error: + return result; +} + +static void sur40_set_vsvideo(struct sur40_state *handle, u8 value) +{ + int i; + + for (i = 0; i < 4; i++) + sur40_poke(handle, 0x1c+i, value); + handle->vsvideo = value; +} + +static void sur40_set_irlevel(struct sur40_state *handle, u8 value) +{ + int i; + + for (i = 0; i < 8; i++) + sur40_poke(handle, 0x08+(2*i), value); +} + /* Initialization routine, called from sur40_open */ static int sur40_init(struct sur40_state *dev) { -- cgit v1.2.3-58-ga151 From cee1e3e2ef39cc3184710c164503143f0e4dcdd4 Mon Sep 17 00:00:00 2001 From: Florian Echtler Date: Thu, 8 Feb 2018 03:43:06 -0500 Subject: media: add video control handlers using V4L2 control framework This patch registers four standard control handlers using the corresponding V4L2 framework. Signed-off-by: Florian Echtler [hans.verkuil@cisco.com: lower-cased 0x0F and 0xF0] Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/input/touchscreen/sur40.c | 64 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index 3b56f7d05ec5..894843a7ec7b 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -215,6 +216,7 @@ struct sur40_state { struct video_device vdev; struct mutex lock; struct v4l2_pix_format pix_fmt; + struct v4l2_ctrl_handler hdl; struct vb2_queue queue; struct list_head buf_list; @@ -224,6 +226,7 @@ struct sur40_state { struct sur40_data *bulk_in_buffer; size_t bulk_in_size; u8 bulk_in_epaddr; + u8 vsvideo; char phys[64]; }; @@ -237,6 +240,11 @@ struct sur40_buffer { static const struct video_device sur40_video_device; static const struct vb2_queue sur40_queue; static void sur40_process_video(struct sur40_state *sur40); +static int sur40_s_ctrl(struct v4l2_ctrl *ctrl); + +static const struct v4l2_ctrl_ops sur40_ctrl_ops = { + .s_ctrl = sur40_s_ctrl, +}; /* * Note: an earlier, non-public version of this driver used USB_RECIP_ENDPOINT @@ -743,6 +751,36 @@ static int sur40_probe(struct usb_interface *interface, sur40->vdev.queue = &sur40->queue; video_set_drvdata(&sur40->vdev, sur40); + /* initialize the control handler for 4 controls */ + v4l2_ctrl_handler_init(&sur40->hdl, 4); + sur40->v4l2.ctrl_handler = &sur40->hdl; + sur40->vsvideo = (SUR40_CONTRAST_DEF << 4) | SUR40_GAIN_DEF; + + v4l2_ctrl_new_std(&sur40->hdl, &sur40_ctrl_ops, V4L2_CID_BRIGHTNESS, + SUR40_BRIGHTNESS_MIN, SUR40_BRIGHTNESS_MAX, 1, clamp(brightness, + (uint)SUR40_BRIGHTNESS_MIN, (uint)SUR40_BRIGHTNESS_MAX)); + + v4l2_ctrl_new_std(&sur40->hdl, &sur40_ctrl_ops, V4L2_CID_CONTRAST, + SUR40_CONTRAST_MIN, SUR40_CONTRAST_MAX, 1, clamp(contrast, + (uint)SUR40_CONTRAST_MIN, (uint)SUR40_CONTRAST_MAX)); + + v4l2_ctrl_new_std(&sur40->hdl, &sur40_ctrl_ops, V4L2_CID_GAIN, + SUR40_GAIN_MIN, SUR40_GAIN_MAX, 1, clamp(gain, + (uint)SUR40_GAIN_MIN, (uint)SUR40_GAIN_MAX)); + + v4l2_ctrl_new_std(&sur40->hdl, &sur40_ctrl_ops, + V4L2_CID_BACKLIGHT_COMPENSATION, SUR40_BACKLIGHT_MIN, + SUR40_BACKLIGHT_MAX, 1, SUR40_BACKLIGHT_DEF); + + v4l2_ctrl_handler_setup(&sur40->hdl); + + if (sur40->hdl.error) { + dev_err(&interface->dev, + "Unable to register video controls."); + v4l2_ctrl_handler_free(&sur40->hdl); + goto err_unreg_v4l2; + } + error = video_register_device(&sur40->vdev, VFL_TYPE_TOUCH, -1); if (error) { dev_err(&interface->dev, @@ -775,6 +813,7 @@ static void sur40_disconnect(struct usb_interface *interface) { struct sur40_state *sur40 = usb_get_intfdata(interface); + v4l2_ctrl_handler_free(&sur40->hdl); video_unregister_device(&sur40->vdev); v4l2_device_unregister(&sur40->v4l2); @@ -968,6 +1007,31 @@ static int sur40_vidioc_g_fmt(struct file *file, void *priv, return 0; } +static int sur40_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct sur40_state *sur40 = container_of(ctrl->handler, + struct sur40_state, hdl); + u8 value = sur40->vsvideo; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + sur40_set_irlevel(sur40, ctrl->val); + break; + case V4L2_CID_CONTRAST: + value = (value & 0x0f) | (ctrl->val << 4); + sur40_set_vsvideo(sur40, value); + break; + case V4L2_CID_GAIN: + value = (value & 0xf0) | (ctrl->val); + sur40_set_vsvideo(sur40, value); + break; + case V4L2_CID_BACKLIGHT_COMPENSATION: + sur40_set_preprocessor(sur40, ctrl->val); + break; + } + return 0; +} + static int sur40_ioctl_parm(struct file *file, void *priv, struct v4l2_streamparm *p) { -- cgit v1.2.3-58-ga151 From b56af54ac78c54a519d82813836f305d7f76ef27 Mon Sep 17 00:00:00 2001 From: Dennis Wassenberg Date: Thu, 8 Mar 2018 15:32:09 -0800 Subject: Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list Reset i8042 before probing because of insufficient BIOS initialisation of the i8042 serial controller. This makes Synaptics touchpad detection possible. Without resetting the Synaptics touchpad is not detected because there are always NACK messages from AUX port. Signed-off-by: Dennis Wassenberg Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 6cbbdc6e9687..6ca00f9ef224 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -620,6 +620,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "20046"), }, }, + { + /* Lenovo ThinkPad L460 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L460"), + }, + }, { /* Clevo P650RS, 650RP6, Sager NP8152-S, and others */ .matches = { -- cgit v1.2.3-58-ga151 From 739d875dd6982618020d30f58f8acf10f6076e6d Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 8 Mar 2018 09:48:46 +0000 Subject: mn10300: Remove the architecture Remove the MN10300 arch as the hardware is defunct. Suggested-by: Arnd Bergmann Signed-off-by: David Howells cc: Masahiro Yamada cc: linux-am33-list@redhat.com Signed-off-by: Arnd Bergmann --- Documentation/00-INDEX | 2 - .../features/core/BPF-JIT/arch-support.txt | 1 - .../core/generic-idle-thread/arch-support.txt | 1 - .../features/core/jump-labels/arch-support.txt | 1 - .../features/core/tracehook/arch-support.txt | 1 - .../features/debug/KASAN/arch-support.txt | 1 - .../debug/gcov-profile-all/arch-support.txt | 1 - Documentation/features/debug/kgdb/arch-support.txt | 1 - .../debug/kprobes-on-ftrace/arch-support.txt | 1 - .../features/debug/kprobes/arch-support.txt | 1 - .../features/debug/kretprobes/arch-support.txt | 1 - .../features/debug/optprobes/arch-support.txt | 1 - .../features/debug/stackprotector/arch-support.txt | 1 - .../features/debug/uprobes/arch-support.txt | 1 - .../debug/user-ret-profiler/arch-support.txt | 1 - .../features/io/dma-api-debug/arch-support.txt | 1 - .../features/io/dma-contiguous/arch-support.txt | 1 - .../features/io/sg-chain/arch-support.txt | 1 - .../features/lib/strncasecmp/arch-support.txt | 1 - .../locking/cmpxchg-local/arch-support.txt | 1 - .../features/locking/lockdep/arch-support.txt | 1 - .../locking/queued-rwlocks/arch-support.txt | 1 - .../locking/queued-spinlocks/arch-support.txt | 1 - .../locking/rwsem-optimized/arch-support.txt | 1 - .../features/perf/kprobes-event/arch-support.txt | 1 - .../features/perf/perf-regs/arch-support.txt | 1 - .../features/perf/perf-stackdump/arch-support.txt | 1 - .../sched/membarrier-sync-core/arch-support.txt | 1 - .../features/sched/numa-balancing/arch-support.txt | 1 - .../seccomp/seccomp-filter/arch-support.txt | 1 - .../time/arch-tick-broadcast/arch-support.txt | 1 - .../features/time/clockevents/arch-support.txt | 1 - .../time/context-tracking/arch-support.txt | 1 - .../features/time/irq-time-acct/arch-support.txt | 1 - .../time/modern-timekeeping/arch-support.txt | 1 - .../features/time/virt-cpuacct/arch-support.txt | 1 - .../features/vm/ELF-ASLR/arch-support.txt | 1 - .../features/vm/PG_uncached/arch-support.txt | 1 - Documentation/features/vm/THP/arch-support.txt | 1 - Documentation/features/vm/TLB/arch-support.txt | 1 - .../features/vm/huge-vmap/arch-support.txt | 1 - .../features/vm/ioremap_prot/arch-support.txt | 1 - .../features/vm/numa-memblock/arch-support.txt | 1 - .../features/vm/pte_special/arch-support.txt | 1 - Documentation/mn10300/ABI.txt | 149 -- Documentation/mn10300/compartmentalisation.txt | 60 - MAINTAINERS | 8 - arch/mn10300/Kconfig | 499 ----- arch/mn10300/Kconfig.debug | 156 -- arch/mn10300/Makefile | 99 - arch/mn10300/boot/.gitignore | 1 - arch/mn10300/boot/Makefile | 28 - arch/mn10300/boot/compressed/Makefile | 22 - arch/mn10300/boot/compressed/head.S | 151 -- arch/mn10300/boot/compressed/misc.c | 393 ---- arch/mn10300/boot/compressed/misc.h | 18 - arch/mn10300/boot/compressed/vmlinux.lds | 9 - arch/mn10300/boot/install.sh | 67 - arch/mn10300/boot/tools/build.c | 191 -- arch/mn10300/configs/asb2303_defconfig | 67 - arch/mn10300/configs/asb2364_defconfig | 87 - arch/mn10300/include/asm/Kbuild | 13 - arch/mn10300/include/asm/asm-offsets.h | 1 - arch/mn10300/include/asm/atomic.h | 161 -- arch/mn10300/include/asm/bitops.h | 232 --- arch/mn10300/include/asm/bug.h | 37 - arch/mn10300/include/asm/bugs.h | 20 - arch/mn10300/include/asm/busctl-regs.h | 151 -- arch/mn10300/include/asm/cache.h | 60 - arch/mn10300/include/asm/cacheflush.h | 164 -- arch/mn10300/include/asm/checksum.h | 79 - arch/mn10300/include/asm/cmpxchg.h | 115 -- arch/mn10300/include/asm/cpu-regs.h | 353 ---- arch/mn10300/include/asm/current.h | 37 - arch/mn10300/include/asm/debugger.h | 43 - arch/mn10300/include/asm/delay.h | 19 - arch/mn10300/include/asm/div64.h | 115 -- arch/mn10300/include/asm/dma-mapping.h | 21 - arch/mn10300/include/asm/dma.h | 117 -- arch/mn10300/include/asm/dmactl-regs.h | 16 - arch/mn10300/include/asm/elf.h | 153 -- arch/mn10300/include/asm/emergency-restart.h | 1 - arch/mn10300/include/asm/exceptions.h | 121 -- arch/mn10300/include/asm/fpu.h | 132 -- arch/mn10300/include/asm/frame.inc | 97 - arch/mn10300/include/asm/ftrace.h | 1 - arch/mn10300/include/asm/futex.h | 1 - arch/mn10300/include/asm/gdb-stub.h | 182 -- arch/mn10300/include/asm/hardirq.h | 49 - arch/mn10300/include/asm/highmem.h | 131 -- arch/mn10300/include/asm/hw_irq.h | 14 - arch/mn10300/include/asm/intctl-regs.h | 71 - arch/mn10300/include/asm/io.h | 325 ---- arch/mn10300/include/asm/irq.h | 40 - arch/mn10300/include/asm/irq_regs.h | 28 - arch/mn10300/include/asm/irqflags.h | 215 --- arch/mn10300/include/asm/kdebug.h | 22 - arch/mn10300/include/asm/kgdb.h | 81 - arch/mn10300/include/asm/kmap_types.h | 7 - arch/mn10300/include/asm/kprobes.h | 55 - arch/mn10300/include/asm/linkage.h | 20 - arch/mn10300/include/asm/local.h | 1 - arch/mn10300/include/asm/local64.h | 1 - arch/mn10300/include/asm/mc146818rtc.h | 1 - arch/mn10300/include/asm/mmu.h | 20 - arch/mn10300/include/asm/mmu_context.h | 163 -- arch/mn10300/include/asm/module.h | 22 - arch/mn10300/include/asm/nmi.h | 16 - arch/mn10300/include/asm/page.h | 130 -- arch/mn10300/include/asm/page_offset.h | 12 - arch/mn10300/include/asm/pci.h | 84 - arch/mn10300/include/asm/percpu.h | 1 - arch/mn10300/include/asm/pgalloc.h | 56 - arch/mn10300/include/asm/pgtable.h | 494 ----- arch/mn10300/include/asm/pio-regs.h | 233 --- arch/mn10300/include/asm/processor.h | 171 -- arch/mn10300/include/asm/ptrace.h | 26 - arch/mn10300/include/asm/reset-regs.h | 60 - arch/mn10300/include/asm/rtc-regs.h | 86 - arch/mn10300/include/asm/rtc.h | 28 - arch/mn10300/include/asm/rwlock.h | 125 -- arch/mn10300/include/asm/serial-regs.h | 191 -- arch/mn10300/include/asm/serial.h | 36 - arch/mn10300/include/asm/setup.h | 18 - arch/mn10300/include/asm/shmparam.h | 7 - arch/mn10300/include/asm/signal.h | 33 - arch/mn10300/include/asm/smp.h | 109 -- arch/mn10300/include/asm/smsc911x.h | 1 - arch/mn10300/include/asm/spinlock.h | 180 -- arch/mn10300/include/asm/spinlock_types.h | 21 - arch/mn10300/include/asm/string.h | 32 - arch/mn10300/include/asm/switch_to.h | 49 - arch/mn10300/include/asm/syscall.h | 117 -- arch/mn10300/include/asm/termios.h | 14 - arch/mn10300/include/asm/thread_info.h | 160 -- arch/mn10300/include/asm/timer-regs.h | 452 ----- arch/mn10300/include/asm/timex.h | 34 - arch/mn10300/include/asm/tlb.h | 34 - arch/mn10300/include/asm/tlbflush.h | 154 -- arch/mn10300/include/asm/topology.h | 1 - arch/mn10300/include/asm/types.h | 22 - arch/mn10300/include/asm/uaccess.h | 297 --- arch/mn10300/include/asm/ucontext.h | 22 - arch/mn10300/include/asm/unaligned.h | 20 - arch/mn10300/include/asm/unistd.h | 47 - arch/mn10300/include/asm/user.h | 53 - arch/mn10300/include/asm/vga.h | 17 - arch/mn10300/include/asm/xor.h | 1 - arch/mn10300/include/uapi/asm/Kbuild | 6 - arch/mn10300/include/uapi/asm/auxvec.h | 4 - arch/mn10300/include/uapi/asm/bitsperlong.h | 2 - arch/mn10300/include/uapi/asm/byteorder.h | 7 - arch/mn10300/include/uapi/asm/errno.h | 2 - arch/mn10300/include/uapi/asm/fcntl.h | 2 - arch/mn10300/include/uapi/asm/ioctl.h | 2 - arch/mn10300/include/uapi/asm/ioctls.h | 7 - arch/mn10300/include/uapi/asm/ipcbuf.h | 2 - arch/mn10300/include/uapi/asm/kvm_para.h | 2 - arch/mn10300/include/uapi/asm/mman.h | 7 - arch/mn10300/include/uapi/asm/msgbuf.h | 32 - arch/mn10300/include/uapi/asm/param.h | 19 - arch/mn10300/include/uapi/asm/posix_types.h | 46 - arch/mn10300/include/uapi/asm/ptrace.h | 85 - arch/mn10300/include/uapi/asm/resource.h | 2 - arch/mn10300/include/uapi/asm/sembuf.h | 26 - arch/mn10300/include/uapi/asm/setup.h | 5 - arch/mn10300/include/uapi/asm/shmbuf.h | 43 - arch/mn10300/include/uapi/asm/sigcontext.h | 53 - arch/mn10300/include/uapi/asm/signal.h | 126 -- arch/mn10300/include/uapi/asm/socket.h | 108 -- arch/mn10300/include/uapi/asm/sockios.h | 14 - arch/mn10300/include/uapi/asm/stat.h | 79 - arch/mn10300/include/uapi/asm/statfs.h | 1 - arch/mn10300/include/uapi/asm/swab.h | 43 - arch/mn10300/include/uapi/asm/termbits.h | 202 -- arch/mn10300/include/uapi/asm/termios.h | 84 - arch/mn10300/include/uapi/asm/types.h | 12 - arch/mn10300/include/uapi/asm/unistd.h | 355 ---- arch/mn10300/kernel/Makefile | 29 - arch/mn10300/kernel/asm-offsets.c | 108 -- arch/mn10300/kernel/cevt-mn10300.c | 137 -- arch/mn10300/kernel/csrc-mn10300.c | 34 - arch/mn10300/kernel/entry.S | 772 -------- arch/mn10300/kernel/fpu-low.S | 258 --- arch/mn10300/kernel/fpu-nofpu-low.S | 39 - arch/mn10300/kernel/fpu-nofpu.c | 31 - arch/mn10300/kernel/fpu.c | 177 -- arch/mn10300/kernel/gdb-io-serial-low.S | 91 - arch/mn10300/kernel/gdb-io-serial.c | 174 -- arch/mn10300/kernel/gdb-io-ttysm-low.S | 93 - arch/mn10300/kernel/gdb-io-ttysm.c | 303 --- arch/mn10300/kernel/gdb-low.S | 115 -- arch/mn10300/kernel/gdb-stub.c | 1924 -------------------- arch/mn10300/kernel/head.S | 442 ----- arch/mn10300/kernel/internal.h | 40 - arch/mn10300/kernel/io.c | 30 - arch/mn10300/kernel/irq.c | 356 ---- arch/mn10300/kernel/kgdb.c | 502 ----- arch/mn10300/kernel/kprobes.c | 656 ------- arch/mn10300/kernel/mn10300-debug.c | 58 - arch/mn10300/kernel/mn10300-serial-low.S | 194 -- arch/mn10300/kernel/mn10300-serial.c | 1790 ------------------ arch/mn10300/kernel/mn10300-serial.h | 130 -- arch/mn10300/kernel/mn10300-watchdog-low.S | 66 - arch/mn10300/kernel/mn10300-watchdog.c | 205 --- arch/mn10300/kernel/mn10300_ksyms.c | 39 - arch/mn10300/kernel/module.c | 156 -- arch/mn10300/kernel/process.c | 175 -- arch/mn10300/kernel/profile-low.S | 72 - arch/mn10300/kernel/profile.c | 51 - arch/mn10300/kernel/ptrace.c | 386 ---- arch/mn10300/kernel/rtc.c | 46 - arch/mn10300/kernel/setup.c | 283 --- arch/mn10300/kernel/sigframe.h | 33 - arch/mn10300/kernel/signal.c | 431 ----- arch/mn10300/kernel/smp-low.S | 97 - arch/mn10300/kernel/smp.c | 1186 ------------ arch/mn10300/kernel/switch_to.S | 179 -- arch/mn10300/kernel/sys_mn10300.c | 33 - arch/mn10300/kernel/time.c | 125 -- arch/mn10300/kernel/traps.c | 615 ------- arch/mn10300/kernel/vmlinux.lds.S | 94 - arch/mn10300/lib/Makefile | 7 - arch/mn10300/lib/__ashldi3.S | 51 - arch/mn10300/lib/__ashrdi3.S | 52 - arch/mn10300/lib/__lshrdi3.S | 52 - arch/mn10300/lib/__ucmpdi2.S | 43 - arch/mn10300/lib/ashrdi3.c | 61 - arch/mn10300/lib/bitops.c | 50 - arch/mn10300/lib/checksum.c | 100 - arch/mn10300/lib/delay.c | 51 - arch/mn10300/lib/do_csum.S | 157 -- arch/mn10300/lib/internal.h | 15 - arch/mn10300/lib/lshrdi3.c | 60 - arch/mn10300/lib/memcpy.S | 135 -- arch/mn10300/lib/memmove.S | 160 -- arch/mn10300/lib/memset.S | 121 -- arch/mn10300/lib/negdi2.c | 57 - arch/mn10300/lib/usercopy.c | 142 -- arch/mn10300/mm/Kconfig.cache | 148 -- arch/mn10300/mm/Makefile | 32 - arch/mn10300/mm/cache-dbg-flush-by-reg.S | 160 -- arch/mn10300/mm/cache-dbg-flush-by-tag.S | 114 -- arch/mn10300/mm/cache-dbg-inv-by-reg.S | 69 - arch/mn10300/mm/cache-dbg-inv-by-tag.S | 120 -- arch/mn10300/mm/cache-dbg-inv.S | 47 - arch/mn10300/mm/cache-disabled.c | 21 - arch/mn10300/mm/cache-flush-by-reg.S | 308 ---- arch/mn10300/mm/cache-flush-by-tag.S | 250 --- arch/mn10300/mm/cache-flush-icache.c | 155 -- arch/mn10300/mm/cache-inv-by-reg.S | 350 ---- arch/mn10300/mm/cache-inv-by-tag.S | 276 --- arch/mn10300/mm/cache-inv-icache.c | 129 -- arch/mn10300/mm/cache-smp-flush.c | 156 -- arch/mn10300/mm/cache-smp-inv.c | 153 -- arch/mn10300/mm/cache-smp.c | 105 -- arch/mn10300/mm/cache-smp.h | 69 - arch/mn10300/mm/cache.c | 54 - arch/mn10300/mm/cache.inc | 133 -- arch/mn10300/mm/dma-alloc.c | 128 -- arch/mn10300/mm/extable.c | 26 - arch/mn10300/mm/fault.c | 414 ----- arch/mn10300/mm/init.c | 136 -- arch/mn10300/mm/misalignment.c | 966 ---------- arch/mn10300/mm/mmu-context.c | 62 - arch/mn10300/mm/pgtable.c | 174 -- arch/mn10300/mm/tlb-mn10300.S | 220 --- arch/mn10300/mm/tlb-smp.c | 213 --- arch/mn10300/oprofile/Makefile | 14 - arch/mn10300/oprofile/op_model_null.c | 22 - arch/mn10300/proc-mn103e010/Makefile | 5 - arch/mn10300/proc-mn103e010/include/proc/cache.h | 43 - arch/mn10300/proc-mn103e010/include/proc/clock.h | 16 - .../proc-mn103e010/include/proc/dmactl-regs.h | 102 -- .../proc-mn103e010/include/proc/intctl-regs.h | 30 - arch/mn10300/proc-mn103e010/include/proc/irq.h | 34 - arch/mn10300/proc-mn103e010/include/proc/proc.h | 18 - arch/mn10300/proc-mn103e010/proc-init.c | 115 -- arch/mn10300/proc-mn2ws0050/Makefile | 5 - arch/mn10300/proc-mn2ws0050/include/proc/cache.h | 49 - arch/mn10300/proc-mn2ws0050/include/proc/clock.h | 20 - .../proc-mn2ws0050/include/proc/dmactl-regs.h | 103 -- .../proc-mn2ws0050/include/proc/intctl-regs.h | 30 - arch/mn10300/proc-mn2ws0050/include/proc/irq.h | 49 - .../proc-mn2ws0050/include/proc/nand-regs.h | 120 -- arch/mn10300/proc-mn2ws0050/include/proc/proc.h | 18 - .../mn10300/proc-mn2ws0050/include/proc/smp-regs.h | 51 - arch/mn10300/proc-mn2ws0050/proc-init.c | 134 -- arch/mn10300/unit-asb2303/Makefile | 6 - arch/mn10300/unit-asb2303/flash.c | 99 - arch/mn10300/unit-asb2303/include/unit/clock.h | 24 - arch/mn10300/unit-asb2303/include/unit/leds.h | 43 - arch/mn10300/unit-asb2303/include/unit/serial.h | 141 -- arch/mn10300/unit-asb2303/include/unit/smc91111.h | 50 - arch/mn10300/unit-asb2303/include/unit/timex.h | 146 -- arch/mn10300/unit-asb2303/leds.c | 52 - arch/mn10300/unit-asb2303/smc91111.c | 53 - arch/mn10300/unit-asb2303/unit-init.c | 68 - arch/mn10300/unit-asb2305/Makefile | 8 - arch/mn10300/unit-asb2305/include/unit/clock.h | 24 - arch/mn10300/unit-asb2305/include/unit/leds.h | 51 - arch/mn10300/unit-asb2305/include/unit/serial.h | 125 -- arch/mn10300/unit-asb2305/include/unit/timex.h | 146 -- arch/mn10300/unit-asb2305/leds.c | 124 -- arch/mn10300/unit-asb2305/pci-asb2305.c | 212 --- arch/mn10300/unit-asb2305/pci-asb2305.h | 65 - arch/mn10300/unit-asb2305/pci-irq.c | 46 - arch/mn10300/unit-asb2305/pci.c | 505 ----- arch/mn10300/unit-asb2305/unit-init.c | 63 - arch/mn10300/unit-asb2364/Makefile | 12 - arch/mn10300/unit-asb2364/include/unit/clock.h | 29 - arch/mn10300/unit-asb2364/include/unit/fpga-regs.h | 53 - arch/mn10300/unit-asb2364/include/unit/irq.h | 35 - arch/mn10300/unit-asb2364/include/unit/leds.h | 54 - arch/mn10300/unit-asb2364/include/unit/serial.h | 151 -- arch/mn10300/unit-asb2364/include/unit/smsc911x.h | 171 -- arch/mn10300/unit-asb2364/include/unit/timex.h | 155 -- arch/mn10300/unit-asb2364/irq-fpga.c | 108 -- arch/mn10300/unit-asb2364/leds.c | 98 - arch/mn10300/unit-asb2364/smsc911x.c | 58 - arch/mn10300/unit-asb2364/unit-init.c | 132 -- crypto/sha3_generic.c | 2 +- drivers/input/joystick/analog.c | 2 +- drivers/net/ethernet/smsc/Kconfig | 6 +- drivers/net/ethernet/smsc/smc91x.h | 8 - drivers/rtc/Kconfig | 2 +- drivers/rtc/rtc-cmos.c | 2 +- drivers/staging/speakup/Kconfig | 2 +- drivers/video/console/Kconfig | 2 +- include/asm-generic/atomic.h | 2 - include/asm-generic/barrier.h | 2 +- include/asm-generic/exec.h | 2 +- include/asm-generic/io.h | 2 +- include/asm-generic/pci_iomap.h | 2 +- include/asm-generic/switch_to.h | 2 +- include/linux/ide.h | 2 +- init/Kconfig | 2 +- lib/Kconfig.debug | 2 +- lib/test_user_copy.c | 1 - scripts/mod/modpost.c | 7 +- tools/arch/mn10300/include/uapi/asm/bitsperlong.h | 1 - tools/arch/mn10300/include/uapi/asm/mman.h | 7 - tools/include/asm-generic/barrier.h | 2 +- 343 files changed, 21 insertions(+), 34163 deletions(-) delete mode 100644 Documentation/mn10300/ABI.txt delete mode 100644 Documentation/mn10300/compartmentalisation.txt delete mode 100644 arch/mn10300/Kconfig delete mode 100644 arch/mn10300/Kconfig.debug delete mode 100644 arch/mn10300/Makefile delete mode 100644 arch/mn10300/boot/.gitignore delete mode 100644 arch/mn10300/boot/Makefile delete mode 100644 arch/mn10300/boot/compressed/Makefile delete mode 100644 arch/mn10300/boot/compressed/head.S delete mode 100644 arch/mn10300/boot/compressed/misc.c delete mode 100644 arch/mn10300/boot/compressed/misc.h delete mode 100644 arch/mn10300/boot/compressed/vmlinux.lds delete mode 100644 arch/mn10300/boot/install.sh delete mode 100644 arch/mn10300/boot/tools/build.c delete mode 100644 arch/mn10300/configs/asb2303_defconfig delete mode 100644 arch/mn10300/configs/asb2364_defconfig delete mode 100644 arch/mn10300/include/asm/Kbuild delete mode 100644 arch/mn10300/include/asm/asm-offsets.h delete mode 100644 arch/mn10300/include/asm/atomic.h delete mode 100644 arch/mn10300/include/asm/bitops.h delete mode 100644 arch/mn10300/include/asm/bug.h delete mode 100644 arch/mn10300/include/asm/bugs.h delete mode 100644 arch/mn10300/include/asm/busctl-regs.h delete mode 100644 arch/mn10300/include/asm/cache.h delete mode 100644 arch/mn10300/include/asm/cacheflush.h delete mode 100644 arch/mn10300/include/asm/checksum.h delete mode 100644 arch/mn10300/include/asm/cmpxchg.h delete mode 100644 arch/mn10300/include/asm/cpu-regs.h delete mode 100644 arch/mn10300/include/asm/current.h delete mode 100644 arch/mn10300/include/asm/debugger.h delete mode 100644 arch/mn10300/include/asm/delay.h delete mode 100644 arch/mn10300/include/asm/div64.h delete mode 100644 arch/mn10300/include/asm/dma-mapping.h delete mode 100644 arch/mn10300/include/asm/dma.h delete mode 100644 arch/mn10300/include/asm/dmactl-regs.h delete mode 100644 arch/mn10300/include/asm/elf.h delete mode 100644 arch/mn10300/include/asm/emergency-restart.h delete mode 100644 arch/mn10300/include/asm/exceptions.h delete mode 100644 arch/mn10300/include/asm/fpu.h delete mode 100644 arch/mn10300/include/asm/frame.inc delete mode 100644 arch/mn10300/include/asm/ftrace.h delete mode 100644 arch/mn10300/include/asm/futex.h delete mode 100644 arch/mn10300/include/asm/gdb-stub.h delete mode 100644 arch/mn10300/include/asm/hardirq.h delete mode 100644 arch/mn10300/include/asm/highmem.h delete mode 100644 arch/mn10300/include/asm/hw_irq.h delete mode 100644 arch/mn10300/include/asm/intctl-regs.h delete mode 100644 arch/mn10300/include/asm/io.h delete mode 100644 arch/mn10300/include/asm/irq.h delete mode 100644 arch/mn10300/include/asm/irq_regs.h delete mode 100644 arch/mn10300/include/asm/irqflags.h delete mode 100644 arch/mn10300/include/asm/kdebug.h delete mode 100644 arch/mn10300/include/asm/kgdb.h delete mode 100644 arch/mn10300/include/asm/kmap_types.h delete mode 100644 arch/mn10300/include/asm/kprobes.h delete mode 100644 arch/mn10300/include/asm/linkage.h delete mode 100644 arch/mn10300/include/asm/local.h delete mode 100644 arch/mn10300/include/asm/local64.h delete mode 100644 arch/mn10300/include/asm/mc146818rtc.h delete mode 100644 arch/mn10300/include/asm/mmu.h delete mode 100644 arch/mn10300/include/asm/mmu_context.h delete mode 100644 arch/mn10300/include/asm/module.h delete mode 100644 arch/mn10300/include/asm/nmi.h delete mode 100644 arch/mn10300/include/asm/page.h delete mode 100644 arch/mn10300/include/asm/page_offset.h delete mode 100644 arch/mn10300/include/asm/pci.h delete mode 100644 arch/mn10300/include/asm/percpu.h delete mode 100644 arch/mn10300/include/asm/pgalloc.h delete mode 100644 arch/mn10300/include/asm/pgtable.h delete mode 100644 arch/mn10300/include/asm/pio-regs.h delete mode 100644 arch/mn10300/include/asm/processor.h delete mode 100644 arch/mn10300/include/asm/ptrace.h delete mode 100644 arch/mn10300/include/asm/reset-regs.h delete mode 100644 arch/mn10300/include/asm/rtc-regs.h delete mode 100644 arch/mn10300/include/asm/rtc.h delete mode 100644 arch/mn10300/include/asm/rwlock.h delete mode 100644 arch/mn10300/include/asm/serial-regs.h delete mode 100644 arch/mn10300/include/asm/serial.h delete mode 100644 arch/mn10300/include/asm/setup.h delete mode 100644 arch/mn10300/include/asm/shmparam.h delete mode 100644 arch/mn10300/include/asm/signal.h delete mode 100644 arch/mn10300/include/asm/smp.h delete mode 100644 arch/mn10300/include/asm/smsc911x.h delete mode 100644 arch/mn10300/include/asm/spinlock.h delete mode 100644 arch/mn10300/include/asm/spinlock_types.h delete mode 100644 arch/mn10300/include/asm/string.h delete mode 100644 arch/mn10300/include/asm/switch_to.h delete mode 100644 arch/mn10300/include/asm/syscall.h delete mode 100644 arch/mn10300/include/asm/termios.h delete mode 100644 arch/mn10300/include/asm/thread_info.h delete mode 100644 arch/mn10300/include/asm/timer-regs.h delete mode 100644 arch/mn10300/include/asm/timex.h delete mode 100644 arch/mn10300/include/asm/tlb.h delete mode 100644 arch/mn10300/include/asm/tlbflush.h delete mode 100644 arch/mn10300/include/asm/topology.h delete mode 100644 arch/mn10300/include/asm/types.h delete mode 100644 arch/mn10300/include/asm/uaccess.h delete mode 100644 arch/mn10300/include/asm/ucontext.h delete mode 100644 arch/mn10300/include/asm/unaligned.h delete mode 100644 arch/mn10300/include/asm/unistd.h delete mode 100644 arch/mn10300/include/asm/user.h delete mode 100644 arch/mn10300/include/asm/vga.h delete mode 100644 arch/mn10300/include/asm/xor.h delete mode 100644 arch/mn10300/include/uapi/asm/Kbuild delete mode 100644 arch/mn10300/include/uapi/asm/auxvec.h delete mode 100644 arch/mn10300/include/uapi/asm/bitsperlong.h delete mode 100644 arch/mn10300/include/uapi/asm/byteorder.h delete mode 100644 arch/mn10300/include/uapi/asm/errno.h delete mode 100644 arch/mn10300/include/uapi/asm/fcntl.h delete mode 100644 arch/mn10300/include/uapi/asm/ioctl.h delete mode 100644 arch/mn10300/include/uapi/asm/ioctls.h delete mode 100644 arch/mn10300/include/uapi/asm/ipcbuf.h delete mode 100644 arch/mn10300/include/uapi/asm/kvm_para.h delete mode 100644 arch/mn10300/include/uapi/asm/mman.h delete mode 100644 arch/mn10300/include/uapi/asm/msgbuf.h delete mode 100644 arch/mn10300/include/uapi/asm/param.h delete mode 100644 arch/mn10300/include/uapi/asm/posix_types.h delete mode 100644 arch/mn10300/include/uapi/asm/ptrace.h delete mode 100644 arch/mn10300/include/uapi/asm/resource.h delete mode 100644 arch/mn10300/include/uapi/asm/sembuf.h delete mode 100644 arch/mn10300/include/uapi/asm/setup.h delete mode 100644 arch/mn10300/include/uapi/asm/shmbuf.h delete mode 100644 arch/mn10300/include/uapi/asm/sigcontext.h delete mode 100644 arch/mn10300/include/uapi/asm/signal.h delete mode 100644 arch/mn10300/include/uapi/asm/socket.h delete mode 100644 arch/mn10300/include/uapi/asm/sockios.h delete mode 100644 arch/mn10300/include/uapi/asm/stat.h delete mode 100644 arch/mn10300/include/uapi/asm/statfs.h delete mode 100644 arch/mn10300/include/uapi/asm/swab.h delete mode 100644 arch/mn10300/include/uapi/asm/termbits.h delete mode 100644 arch/mn10300/include/uapi/asm/termios.h delete mode 100644 arch/mn10300/include/uapi/asm/types.h delete mode 100644 arch/mn10300/include/uapi/asm/unistd.h delete mode 100644 arch/mn10300/kernel/Makefile delete mode 100644 arch/mn10300/kernel/asm-offsets.c delete mode 100644 arch/mn10300/kernel/cevt-mn10300.c delete mode 100644 arch/mn10300/kernel/csrc-mn10300.c delete mode 100644 arch/mn10300/kernel/entry.S delete mode 100644 arch/mn10300/kernel/fpu-low.S delete mode 100644 arch/mn10300/kernel/fpu-nofpu-low.S delete mode 100644 arch/mn10300/kernel/fpu-nofpu.c delete mode 100644 arch/mn10300/kernel/fpu.c delete mode 100644 arch/mn10300/kernel/gdb-io-serial-low.S delete mode 100644 arch/mn10300/kernel/gdb-io-serial.c delete mode 100644 arch/mn10300/kernel/gdb-io-ttysm-low.S delete mode 100644 arch/mn10300/kernel/gdb-io-ttysm.c delete mode 100644 arch/mn10300/kernel/gdb-low.S delete mode 100644 arch/mn10300/kernel/gdb-stub.c delete mode 100644 arch/mn10300/kernel/head.S delete mode 100644 arch/mn10300/kernel/internal.h delete mode 100644 arch/mn10300/kernel/io.c delete mode 100644 arch/mn10300/kernel/irq.c delete mode 100644 arch/mn10300/kernel/kgdb.c delete mode 100644 arch/mn10300/kernel/kprobes.c delete mode 100644 arch/mn10300/kernel/mn10300-debug.c delete mode 100644 arch/mn10300/kernel/mn10300-serial-low.S delete mode 100644 arch/mn10300/kernel/mn10300-serial.c delete mode 100644 arch/mn10300/kernel/mn10300-serial.h delete mode 100644 arch/mn10300/kernel/mn10300-watchdog-low.S delete mode 100644 arch/mn10300/kernel/mn10300-watchdog.c delete mode 100644 arch/mn10300/kernel/mn10300_ksyms.c delete mode 100644 arch/mn10300/kernel/module.c delete mode 100644 arch/mn10300/kernel/process.c delete mode 100644 arch/mn10300/kernel/profile-low.S delete mode 100644 arch/mn10300/kernel/profile.c delete mode 100644 arch/mn10300/kernel/ptrace.c delete mode 100644 arch/mn10300/kernel/rtc.c delete mode 100644 arch/mn10300/kernel/setup.c delete mode 100644 arch/mn10300/kernel/sigframe.h delete mode 100644 arch/mn10300/kernel/signal.c delete mode 100644 arch/mn10300/kernel/smp-low.S delete mode 100644 arch/mn10300/kernel/smp.c delete mode 100644 arch/mn10300/kernel/switch_to.S delete mode 100644 arch/mn10300/kernel/sys_mn10300.c delete mode 100644 arch/mn10300/kernel/time.c delete mode 100644 arch/mn10300/kernel/traps.c delete mode 100644 arch/mn10300/kernel/vmlinux.lds.S delete mode 100644 arch/mn10300/lib/Makefile delete mode 100644 arch/mn10300/lib/__ashldi3.S delete mode 100644 arch/mn10300/lib/__ashrdi3.S delete mode 100644 arch/mn10300/lib/__lshrdi3.S delete mode 100644 arch/mn10300/lib/__ucmpdi2.S delete mode 100644 arch/mn10300/lib/ashrdi3.c delete mode 100644 arch/mn10300/lib/bitops.c delete mode 100644 arch/mn10300/lib/checksum.c delete mode 100644 arch/mn10300/lib/delay.c delete mode 100644 arch/mn10300/lib/do_csum.S delete mode 100644 arch/mn10300/lib/internal.h delete mode 100644 arch/mn10300/lib/lshrdi3.c delete mode 100644 arch/mn10300/lib/memcpy.S delete mode 100644 arch/mn10300/lib/memmove.S delete mode 100644 arch/mn10300/lib/memset.S delete mode 100644 arch/mn10300/lib/negdi2.c delete mode 100644 arch/mn10300/lib/usercopy.c delete mode 100644 arch/mn10300/mm/Kconfig.cache delete mode 100644 arch/mn10300/mm/Makefile delete mode 100644 arch/mn10300/mm/cache-dbg-flush-by-reg.S delete mode 100644 arch/mn10300/mm/cache-dbg-flush-by-tag.S delete mode 100644 arch/mn10300/mm/cache-dbg-inv-by-reg.S delete mode 100644 arch/mn10300/mm/cache-dbg-inv-by-tag.S delete mode 100644 arch/mn10300/mm/cache-dbg-inv.S delete mode 100644 arch/mn10300/mm/cache-disabled.c delete mode 100644 arch/mn10300/mm/cache-flush-by-reg.S delete mode 100644 arch/mn10300/mm/cache-flush-by-tag.S delete mode 100644 arch/mn10300/mm/cache-flush-icache.c delete mode 100644 arch/mn10300/mm/cache-inv-by-reg.S delete mode 100644 arch/mn10300/mm/cache-inv-by-tag.S delete mode 100644 arch/mn10300/mm/cache-inv-icache.c delete mode 100644 arch/mn10300/mm/cache-smp-flush.c delete mode 100644 arch/mn10300/mm/cache-smp-inv.c delete mode 100644 arch/mn10300/mm/cache-smp.c delete mode 100644 arch/mn10300/mm/cache-smp.h delete mode 100644 arch/mn10300/mm/cache.c delete mode 100644 arch/mn10300/mm/cache.inc delete mode 100644 arch/mn10300/mm/dma-alloc.c delete mode 100644 arch/mn10300/mm/extable.c delete mode 100644 arch/mn10300/mm/fault.c delete mode 100644 arch/mn10300/mm/init.c delete mode 100644 arch/mn10300/mm/misalignment.c delete mode 100644 arch/mn10300/mm/mmu-context.c delete mode 100644 arch/mn10300/mm/pgtable.c delete mode 100644 arch/mn10300/mm/tlb-mn10300.S delete mode 100644 arch/mn10300/mm/tlb-smp.c delete mode 100644 arch/mn10300/oprofile/Makefile delete mode 100644 arch/mn10300/oprofile/op_model_null.c delete mode 100644 arch/mn10300/proc-mn103e010/Makefile delete mode 100644 arch/mn10300/proc-mn103e010/include/proc/cache.h delete mode 100644 arch/mn10300/proc-mn103e010/include/proc/clock.h delete mode 100644 arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h delete mode 100644 arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h delete mode 100644 arch/mn10300/proc-mn103e010/include/proc/irq.h delete mode 100644 arch/mn10300/proc-mn103e010/include/proc/proc.h delete mode 100644 arch/mn10300/proc-mn103e010/proc-init.c delete mode 100644 arch/mn10300/proc-mn2ws0050/Makefile delete mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/cache.h delete mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/clock.h delete mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h delete mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h delete mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/irq.h delete mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h delete mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/proc.h delete mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h delete mode 100644 arch/mn10300/proc-mn2ws0050/proc-init.c delete mode 100644 arch/mn10300/unit-asb2303/Makefile delete mode 100644 arch/mn10300/unit-asb2303/flash.c delete mode 100644 arch/mn10300/unit-asb2303/include/unit/clock.h delete mode 100644 arch/mn10300/unit-asb2303/include/unit/leds.h delete mode 100644 arch/mn10300/unit-asb2303/include/unit/serial.h delete mode 100644 arch/mn10300/unit-asb2303/include/unit/smc91111.h delete mode 100644 arch/mn10300/unit-asb2303/include/unit/timex.h delete mode 100644 arch/mn10300/unit-asb2303/leds.c delete mode 100644 arch/mn10300/unit-asb2303/smc91111.c delete mode 100644 arch/mn10300/unit-asb2303/unit-init.c delete mode 100644 arch/mn10300/unit-asb2305/Makefile delete mode 100644 arch/mn10300/unit-asb2305/include/unit/clock.h delete mode 100644 arch/mn10300/unit-asb2305/include/unit/leds.h delete mode 100644 arch/mn10300/unit-asb2305/include/unit/serial.h delete mode 100644 arch/mn10300/unit-asb2305/include/unit/timex.h delete mode 100644 arch/mn10300/unit-asb2305/leds.c delete mode 100644 arch/mn10300/unit-asb2305/pci-asb2305.c delete mode 100644 arch/mn10300/unit-asb2305/pci-asb2305.h delete mode 100644 arch/mn10300/unit-asb2305/pci-irq.c delete mode 100644 arch/mn10300/unit-asb2305/pci.c delete mode 100644 arch/mn10300/unit-asb2305/unit-init.c delete mode 100644 arch/mn10300/unit-asb2364/Makefile delete mode 100644 arch/mn10300/unit-asb2364/include/unit/clock.h delete mode 100644 arch/mn10300/unit-asb2364/include/unit/fpga-regs.h delete mode 100644 arch/mn10300/unit-asb2364/include/unit/irq.h delete mode 100644 arch/mn10300/unit-asb2364/include/unit/leds.h delete mode 100644 arch/mn10300/unit-asb2364/include/unit/serial.h delete mode 100644 arch/mn10300/unit-asb2364/include/unit/smsc911x.h delete mode 100644 arch/mn10300/unit-asb2364/include/unit/timex.h delete mode 100644 arch/mn10300/unit-asb2364/irq-fpga.c delete mode 100644 arch/mn10300/unit-asb2364/leds.c delete mode 100644 arch/mn10300/unit-asb2364/smsc911x.c delete mode 100644 arch/mn10300/unit-asb2364/unit-init.c delete mode 100644 tools/arch/mn10300/include/uapi/asm/bitsperlong.h delete mode 100644 tools/arch/mn10300/include/uapi/asm/mman.h (limited to 'drivers/input') diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index eae1e7193f50..bd7e2d08d790 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -284,8 +284,6 @@ misc-devices/ - directory with info about devices using the misc dev subsystem mmc/ - directory with info about the MMC subsystem -mn10300/ - - directory with info about the mn10300 architecture port mtd/ - directory with info about memory technology devices (flash) namespaces/ diff --git a/Documentation/features/core/BPF-JIT/arch-support.txt b/Documentation/features/core/BPF-JIT/arch-support.txt index b0634ec01881..544eb1dd5fe1 100644 --- a/Documentation/features/core/BPF-JIT/arch-support.txt +++ b/Documentation/features/core/BPF-JIT/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index e2a1a385efd3..c7f8626faca2 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | ok | diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index dafcea38fe5e..647b0ab5a78d 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index 3d7886fcb6a9..c95ba6d79cee 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | ok | | nios2: | ok | | openrisc: | ok | | parisc: | ok | diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index 63598b0e8ea6..fbb5afe45848 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index 13b3b3dfe7f2..a35c5057585b 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | ok | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt index cb4792cf0f98..afb31a2505cb 100644 --- a/Documentation/features/debug/kgdb/arch-support.txt +++ b/Documentation/features/debug/kgdb/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | ok | | mips: | ok | - | mn10300: | ok | | nios2: | ok | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index 2046539489fe..4144979bc022 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt index bfb3546a70d0..7ec1a185e713 100644 --- a/Documentation/features/debug/kprobes/arch-support.txt +++ b/Documentation/features/debug/kprobes/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt index cb2213bfadc5..fa9009c08b1f 100644 --- a/Documentation/features/debug/kretprobes/arch-support.txt +++ b/Documentation/features/debug/kretprobes/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt index 219aa64ca3f5..38adefbe2edf 100644 --- a/Documentation/features/debug/optprobes/arch-support.txt +++ b/Documentation/features/debug/optprobes/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt index 904864c3f18c..2965ae0ca139 100644 --- a/Documentation/features/debug/stackprotector/arch-support.txt +++ b/Documentation/features/debug/stackprotector/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt index d092f000e6bb..5da0bc2e7e1e 100644 --- a/Documentation/features/debug/uprobes/arch-support.txt +++ b/Documentation/features/debug/uprobes/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt index 9e9e195b6d30..a45ced203f32 100644 --- a/Documentation/features/debug/user-ret-profiler/arch-support.txt +++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/io/dma-api-debug/arch-support.txt b/Documentation/features/io/dma-api-debug/arch-support.txt index ba9e169859c4..411ec941e46c 100644 --- a/Documentation/features/io/dma-api-debug/arch-support.txt +++ b/Documentation/features/io/dma-api-debug/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | ok | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt index 35b501f2c117..3b65953a96a9 100644 --- a/Documentation/features/io/dma-contiguous/arch-support.txt +++ b/Documentation/features/io/dma-contiguous/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/io/sg-chain/arch-support.txt b/Documentation/features/io/sg-chain/arch-support.txt index 42c078dff18b..65e9368c69a7 100644 --- a/Documentation/features/io/sg-chain/arch-support.txt +++ b/Documentation/features/io/sg-chain/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/lib/strncasecmp/arch-support.txt b/Documentation/features/lib/strncasecmp/arch-support.txt index b10c21f14739..cee48bd07b08 100644 --- a/Documentation/features/lib/strncasecmp/arch-support.txt +++ b/Documentation/features/lib/strncasecmp/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt index 3b87fd37bae8..a83465dc0db5 100644 --- a/Documentation/features/locking/cmpxchg-local/arch-support.txt +++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt index cefcd720f04e..e5d51c585a90 100644 --- a/Documentation/features/locking/lockdep/arch-support.txt +++ b/Documentation/features/locking/lockdep/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | ok | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt index da6c7e37141c..5cae3a63a44e 100644 --- a/Documentation/features/locking/queued-rwlocks/arch-support.txt +++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt index 1e5dbcdd1c76..cb227de0bbf9 100644 --- a/Documentation/features/locking/queued-spinlocks/arch-support.txt +++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/locking/rwsem-optimized/arch-support.txt b/Documentation/features/locking/rwsem-optimized/arch-support.txt index b79e92288112..ee70c9c52627 100644 --- a/Documentation/features/locking/rwsem-optimized/arch-support.txt +++ b/Documentation/features/locking/rwsem-optimized/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt index 6418ccc6fc34..52f54e64e993 100644 --- a/Documentation/features/perf/kprobes-event/arch-support.txt +++ b/Documentation/features/perf/kprobes-event/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index 3b3392ac6466..e4294aed38bf 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index 4594cb28fbc8..b12117a9aa4d 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index 42eaab4d439d..0f419ecfbce6 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -44,7 +44,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt index 4e67833aae66..045418673368 100644 --- a/Documentation/features/sched/numa-balancing/arch-support.txt +++ b/Documentation/features/sched/numa-balancing/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | .. | | microblaze: | .. | | mips: | TODO | - | mn10300: | .. | | nios2: | .. | | openrisc: | .. | | parisc: | .. | diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt index c5d8b397a693..c08a330e51d2 100644 --- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt +++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt index 9e4999136881..da91b576ede8 100644 --- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt +++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt index f90cb64c640b..d76322a76668 100644 --- a/Documentation/features/time/clockevents/arch-support.txt +++ b/Documentation/features/time/clockevents/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | ok | | microblaze: | ok | | mips: | ok | - | mn10300: | ok | | nios2: | ok | | openrisc: | ok | | parisc: | TODO | diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt index eb4e5d32a2e9..09582d171c84 100644 --- a/Documentation/features/time/context-tracking/arch-support.txt +++ b/Documentation/features/time/context-tracking/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt index 02b7441f360f..5df0285b6fc4 100644 --- a/Documentation/features/time/irq-time-acct/arch-support.txt +++ b/Documentation/features/time/irq-time-acct/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | .. | diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt index b3eb6fe6bc27..0f8c7e4084b0 100644 --- a/Documentation/features/time/modern-timekeeping/arch-support.txt +++ b/Documentation/features/time/modern-timekeeping/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | ok | | mips: | ok | - | mn10300: | ok | | nios2: | ok | | openrisc: | ok | | parisc: | ok | diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt index a1bd77fd723a..c0af0a37444d 100644 --- a/Documentation/features/time/virt-cpuacct/arch-support.txt +++ b/Documentation/features/time/virt-cpuacct/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | ok | diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt index 3f926177833c..72c3124ffd1f 100644 --- a/Documentation/features/vm/ELF-ASLR/arch-support.txt +++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt index 4c8f65d525d7..46c62a1d7dda 100644 --- a/Documentation/features/vm/PG_uncached/arch-support.txt +++ b/Documentation/features/vm/PG_uncached/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt index d121dc2e3e5e..eaace2054bb4 100644 --- a/Documentation/features/vm/THP/arch-support.txt +++ b/Documentation/features/vm/THP/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | .. | | microblaze: | .. | | mips: | ok | - | mn10300: | .. | | nios2: | .. | | openrisc: | .. | | parisc: | TODO | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index af233d2d82cf..b1088eaaff3f 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | .. | | microblaze: | .. | | mips: | TODO | - | mn10300: | TODO | | nios2: | .. | | openrisc: | .. | | parisc: | TODO | diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt index 45c74fbe6805..6e4e5295ee2a 100644 --- a/Documentation/features/vm/huge-vmap/arch-support.txt +++ b/Documentation/features/vm/huge-vmap/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 6cd436af0cc8..185e0654389f 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/features/vm/numa-memblock/arch-support.txt b/Documentation/features/vm/numa-memblock/arch-support.txt index 2db895856da6..de7f891fb2a8 100644 --- a/Documentation/features/vm/numa-memblock/arch-support.txt +++ b/Documentation/features/vm/numa-memblock/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | .. | | microblaze: | ok | | mips: | ok | - | mn10300: | TODO | | nios2: | .. | | openrisc: | .. | | parisc: | .. | diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt index ccb15b6da42f..8587fe975fea 100644 --- a/Documentation/features/vm/pte_special/arch-support.txt +++ b/Documentation/features/vm/pte_special/arch-support.txt @@ -21,7 +21,6 @@ | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt deleted file mode 100644 index d3507bad428d..000000000000 --- a/Documentation/mn10300/ABI.txt +++ /dev/null @@ -1,149 +0,0 @@ - ========================= - MN10300 FUNCTION CALL ABI - ========================= - -======= -GENERAL -======= - -The MN10300/AM33 kernel runs in little-endian mode; big-endian mode is not -supported. - -The stack grows downwards, and should always be 32-bit aligned. There are -separate stack pointer registers for userspace and the kernel. - - -================ -ARGUMENT PASSING -================ - -The first two arguments (assuming up to 32-bits per argument) to a function are -passed in the D0 and D1 registers respectively; all other arguments are passed -on the stack. - -If 64-bit arguments are being passed, then they are never split between -registers and the stack. If the first argument is a 64-bit value, it will be -passed in D0:D1. If the first argument is not a 64-bit value, but the second -is, the second will be passed entirely on the stack and D1 will be unused. - -Arguments smaller than 32-bits are not coalesced within a register or a stack -word. For example, two byte-sized arguments will always be passed in separate -registers or word-sized stack slots. - - -================= -CALLING FUNCTIONS -================= - -The caller must allocate twelve bytes on the stack for the callee's use before -it inserts a CALL instruction. The CALL instruction will write into the TOS -word, but won't actually modify the stack pointer; similarly, the RET -instruction reads from the TOS word of the stack, but doesn't move the stack -pointer beyond it. - - - Stack: - | | - | | - |---------------| SP+20 - | 4th Arg | - |---------------| SP+16 - | 3rd Arg | - |---------------| SP+12 - | D1 Save Slot | - |---------------| SP+8 - | D0 Save Slot | - |---------------| SP+4 - | Return Addr | - |---------------| SP - | | - | | - - -The caller must leave space on the stack (hence an allocation of twelve bytes) -in which the callee may store the first two arguments. - - -============ -RETURN VALUE -============ - -The return value is passed in D0 for an integer (or D0:D1 for a 64-bit value), -or A0 for a pointer. - -If the return value is a value larger than 64-bits, or is a structure or an -array, then a hidden first argument will be passed to the callee by the caller: -this will point to a piece of memory large enough to hold the result of the -function. In this case, the callee will return the value in that piece of -memory, and no value will be returned in D0 or A0. - - -=================== -REGISTER CLOBBERING -=================== - -The values in certain registers may be clobbered by the callee, and other -values must be saved: - - Clobber: D0-D1, A0-A1, E0-E3 - Save: D2-D3, A2-A3, E4-E7, SP - -All other non-supervisor-only registers are clobberable (such as MDR, MCRL, -MCRH). - - -================= -SPECIAL REGISTERS -================= - -Certain ordinary registers may carry special usage for the compiler: - - A3: Frame pointer - E2: TLS pointer - - -========== -KERNEL ABI -========== - -The kernel may use a slightly different ABI internally. - - (*) E2 - - If CONFIG_MN10300_CURRENT_IN_E2 is defined, then the current task pointer - will be kept in the E2 register, and that register will be marked - unavailable for the compiler to use as a scratch register. - - Normally the kernel uses something like: - - MOV SP,An - AND 0xFFFFE000,An - MOV (An),Rm // Rm holds current - MOV (yyy,Rm) // Access current->yyy - - To find the address of current; but since this option permits current to - be carried globally in an register, it can use: - - MOV (yyy,E2) // Access current->yyy - - instead. - - -=============== -SYSTEM CALL ABI -=============== - -System calls are called with the following convention: - - REGISTER ENTRY EXIT - =============== ======================= ======================= - D0 Syscall number Return value - A0 1st syscall argument Saved - D1 2nd syscall argument Saved - A3 3rd syscall argument Saved - A2 4th syscall argument Saved - D3 5th syscall argument Saved - D2 6th syscall argument Saved - -All other registers are saved. The layout is a consequence of the way the MOVM -instruction stores registers onto the stack. diff --git a/Documentation/mn10300/compartmentalisation.txt b/Documentation/mn10300/compartmentalisation.txt deleted file mode 100644 index 8958b51dac4b..000000000000 --- a/Documentation/mn10300/compartmentalisation.txt +++ /dev/null @@ -1,60 +0,0 @@ - ========================================= - PART-SPECIFIC SOURCE COMPARTMENTALISATION - ========================================= - -The sources for various parts are compartmentalised at two different levels: - - (1) Processor level - - The "processor level" is a CPU core plus the other on-silicon - peripherals. - - Processor-specific header files are divided among directories in a similar - way to the CPU level: - - (*) include/asm-mn10300/proc-mn103e010/ - - Support for the AM33v2 CPU core. - - The appropriate processor is selected by a CONFIG_MN10300_PROC_YYYY option - from the "Processor support" choice menu in the arch/mn10300/Kconfig file. - - - (2) Unit level - - The "unit level" is a processor plus all the external peripherals - controlled by that processor. - - Unit-specific header files are divided among directories in a similar way - to the CPU level; not only that, but specific sources may also be - segregated into separate directories under the arch directory: - - (*) include/asm-mn10300/unit-asb2303/ - (*) arch/mn10300/unit-asb2303/ - - Support for the ASB2303 board with an ASB2308 daughter board. - - (*) include/asm-mn10300/unit-asb2305/ - (*) arch/mn10300/unit-asb2305/ - - Support for the ASB2305 board. - - The appropriate processor is selected by a CONFIG_MN10300_UNIT_ZZZZ option - from the "Unit type" choice menu in the arch/mn10300/Kconfig file. - - -============ -COMPILE TIME -============ - -When the kernel is compiled, symbolic links will be made in the asm header file -directory for this arch: - - include/asm-mn10300/proc => include/asm-mn10300/proc-YYYY/ - include/asm-mn10300/unit => include/asm-mn10300/unit-ZZZZ/ - -So that the header files contained in those directories can be accessed without -lots of #ifdef-age. - -The appropriate arch/mn10300/unit-ZZZZ directory will also be entered by the -compilation process; all other unit-specific directories will be ignored. diff --git a/MAINTAINERS b/MAINTAINERS index 313754bf39e1..69123be5bb64 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10394,14 +10394,6 @@ L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/panasonic-laptop.c -PANASONIC MN10300/AM33/AM34 PORT -M: David Howells -L: linux-am33-list@redhat.com (moderated for non-subscribers) -W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/ -S: Maintained -F: Documentation/mn10300/ -F: arch/mn10300/ - PARALLEL LCD/KEYPAD PANEL DRIVER M: Willy Tarreau M: Ksenija Stanojevic diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig deleted file mode 100644 index e9d8d60bd28b..000000000000 --- a/arch/mn10300/Kconfig +++ /dev/null @@ -1,499 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config MN10300 - def_bool y - select HAVE_EXIT_THREAD - select HAVE_OPROFILE - select HAVE_UID16 - select GENERIC_IRQ_SHOW - select ARCH_WANT_IPC_PARSE_VERSION - select HAVE_ARCH_TRACEHOOK - select HAVE_ARCH_KGDB - select GENERIC_ATOMIC64 - select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER - select VIRT_TO_BUS - select GENERIC_CLOCKEVENTS - select MODULES_USE_ELF_RELA - select OLD_SIGSUSPEND3 - select OLD_SIGACTION - select HAVE_DEBUG_STACKOVERFLOW - select ARCH_NO_COHERENT_DMA_MMAP - -config AM33_2 - def_bool n - -config AM33_3 - def_bool n - -config AM34_2 - def_bool n - select MN10300_HAS_ATOMIC_OPS_UNIT - select MN10300_HAS_CACHE_SNOOP - -config ERRATUM_NEED_TO_RELOAD_MMUCTR - def_bool y if AM33_3 || AM34_2 - -config MMU - def_bool y - -config HIGHMEM - def_bool n - -config NUMA - def_bool n - -config RWSEM_GENERIC_SPINLOCK - def_bool y - -config RWSEM_XCHGADD_ALGORITHM - bool - -config GENERIC_CALIBRATE_DELAY - def_bool y - -config GENERIC_HWEIGHT - def_bool y - -config GENERIC_BUG - def_bool y - depends on BUG - -config QUICKLIST - def_bool y - -config ARCH_HAS_ILOG2_U32 - def_bool y - -config HOTPLUG_CPU - def_bool n - -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - - -menu "Panasonic MN10300 system setup" - -choice - prompt "Unit type" - default MN10300_UNIT_ASB2303 - help - This option specifies board for which the kernel will be - compiled. It affects the external peripherals catered for. - -config MN10300_UNIT_ASB2303 - bool "ASB2303" - -config MN10300_UNIT_ASB2305 - bool "ASB2305" - -config MN10300_UNIT_ASB2364 - bool "ASB2364" - select SMSC911X_ARCH_HOOKS if SMSC911X - -endchoice - -choice - prompt "Processor support" - default MN10300_PROC_MN103E010 - help - This option specifies the processor for which the kernel will be - compiled. It affects the on-chip peripherals catered for. - -config MN10300_PROC_MN103E010 - bool "MN103E010" - depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305 - select AM33_2 - select MN10300_PROC_HAS_TTYSM0 - select MN10300_PROC_HAS_TTYSM1 - select MN10300_PROC_HAS_TTYSM2 - -config MN10300_PROC_MN2WS0050 - bool "MN2WS0050" - depends on MN10300_UNIT_ASB2364 - select AM34_2 - select MN10300_PROC_HAS_TTYSM0 - select MN10300_PROC_HAS_TTYSM1 - select MN10300_PROC_HAS_TTYSM2 - -endchoice - -config MN10300_HAS_ATOMIC_OPS_UNIT - def_bool n - help - This should be enabled if the processor has an atomic ops unit - capable of doing LL/SC equivalent operations. - -config FPU - bool "FPU present" - default y - depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 - -config LAZY_SAVE_FPU - bool "Save FPU state lazily" - default y - depends on FPU && !SMP - help - Enable this to be lazy in the saving of the FPU state to the owning - task's thread struct. This is useful if most tasks on the system - don't use the FPU as only those tasks that use it will pass it - between them, and the state needn't be saved for a task that isn't - using it. - - This can't be so easily used on SMP as the process that owns the FPU - state on a CPU may be currently running on another CPU, so for the - moment, it is disabled. - -source "arch/mn10300/mm/Kconfig.cache" - -config MN10300_TLB_USE_PIDR - def_bool y - -menu "Memory layout options" - -config KERNEL_RAM_BASE_ADDRESS - hex "Base address of kernel RAM" - default "0x90000000" - -config INTERRUPT_VECTOR_BASE - hex "Base address of vector table" - default "0x90000000" - help - The base address of the vector table will be programmed into - the TBR register. It must be on 16MiB address boundary. - -config KERNEL_TEXT_ADDRESS - hex "Base address of kernel" - default "0x90001000" - -config KERNEL_ZIMAGE_BASE_ADDRESS - hex "Base address of compressed vmlinux image" - default "0x50700000" - -config BOOT_STACK_OFFSET - hex - default "0xF00" if SMP - default "0xFF0" if !SMP - -config BOOT_STACK_SIZE - hex - depends on SMP - default "0x100" -endmenu - -config SMP - bool "Symmetric multi-processing support" - default y - depends on MN10300_PROC_MN2WS0050 - ---help--- - This enables support for systems with more than one CPU. If you have - a system with only one CPU, say N. If you have a system with more - than one CPU, say Y. - - If you say N here, the kernel will run on uni- and multiprocessor - machines, but will use only one CPU of a multiprocessor machine. If - you say Y here, the kernel will run on many, but not all, - uniprocessor machines. On a uniprocessor machine, the kernel - will run faster if you say N here. - - See also , - and the SMP-HOWTO available at - . - - If you don't know what to do here, say N. - -config NR_CPUS - int - depends on SMP - default "2" - -source "kernel/Kconfig.preempt" - -config MN10300_CURRENT_IN_E2 - bool "Hold current task address in E2 register" - depends on !SMP - default y - help - This option removes the E2/R2 register from the set available to gcc - for normal use and instead uses it to store the address of the - current process's task_struct whilst in the kernel. - - This means the kernel doesn't need to calculate the address each time - "current" is used (take SP, AND with mask and dereference pointer - just to get the address), and instead can just use E2+offset - addressing each time. - - This has no effect on userspace. - -config MN10300_USING_JTAG - bool "Using JTAG to debug kernel" - default y - help - This options indicates that JTAG will be used to debug the kernel. It - suppresses the use of certain hardware debugging features, such as - single-stepping, which are taken over completely by the JTAG unit. - -source "kernel/Kconfig.hz" - -config MN10300_RTC - bool "Using MN10300 RTC" - depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 - select RTC_CLASS - select RTC_DRV_CMOS - select RTC_SYSTOHC - default n - help - This option enables support for the RTC, thus enabling time to be - tracked, even when system is powered down. This is available on-chip - on the MN103E010. - -config MN10300_WD_TIMER - bool "Using MN10300 watchdog timer" - default y - help - This options indicates that the watchdog timer will be used. - -config PCI - bool "Use PCI" - depends on MN10300_UNIT_ASB2305 - default y - select GENERIC_PCI_IOMAP - help - Some systems (such as the ASB2305) have PCI onboard. If you have one - of these boards and you wish to use the PCI facilities, say Y here. - - The PCI-HOWTO, available from - , contains valuable - information about which PCI hardware does work under Linux and which - doesn't. - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -menu "MN10300 internal serial options" - -config MN10300_PROC_HAS_TTYSM0 - bool - default n - -config MN10300_PROC_HAS_TTYSM1 - bool - default n - -config MN10300_PROC_HAS_TTYSM2 - bool - default n - -config MN10300_TTYSM - bool "Support for ttySM serial ports" - depends on MN10300 - default y - select SERIAL_CORE - help - This option enables support for the on-chip serial ports that the - MN10300 has available. - -config MN10300_TTYSM_CONSOLE - bool "Support for console on ttySM serial ports" - depends on MN10300_TTYSM - select SERIAL_CORE_CONSOLE - help - This option enables support for a console on the on-chip serial ports - that the MN10300 has available. - -# -# /dev/ttySM0 -# -config MN10300_TTYSM0 - bool "Enable SIF0 (/dev/ttySM0)" - depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0 - help - Enable access to SIF0 through /dev/ttySM0 or gdb-stub - -choice - prompt "Select the timer to supply the clock for SIF0" - default MN10300_TTYSM0_TIMER8 - depends on MN10300_TTYSM0 - -config MN10300_TTYSM0_TIMER8 - bool "Use timer 8 (16-bit)" - -config MN10300_TTYSM0_TIMER2 - bool "Use timer 2 (8-bit)" - -endchoice - -# -# /dev/ttySM1 -# -config MN10300_TTYSM1 - bool "Enable SIF1 (/dev/ttySM1)" - depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1 - help - Enable access to SIF1 through /dev/ttySM1 or gdb-stub - -choice - prompt "Select the timer to supply the clock for SIF1" - default MN10300_TTYSM1_TIMER12 \ - if !(AM33_2 || AM33_3) - default MN10300_TTYSM1_TIMER9 \ - if AM33_2 || AM33_3 - depends on MN10300_TTYSM1 - -config MN10300_TTYSM1_TIMER12 - bool "Use timer 12 (16-bit)" - depends on !(AM33_2 || AM33_3) - -config MN10300_TTYSM1_TIMER9 - bool "Use timer 9 (16-bit)" - depends on AM33_2 || AM33_3 - -config MN10300_TTYSM1_TIMER3 - bool "Use timer 3 (8-bit)" - depends on AM33_2 || AM33_3 - -endchoice - -# -# /dev/ttySM2 -# -config MN10300_TTYSM2 - bool "Enable SIF2 (/dev/ttySM2)" - depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2 - help - Enable access to SIF2 through /dev/ttySM2 or gdb-stub - -choice - prompt "Select the timer to supply the clock for SIF2" - default MN10300_TTYSM2_TIMER3 \ - if !(AM33_2 || AM33_3) - default MN10300_TTYSM2_TIMER10 \ - if AM33_2 || AM33_3 - depends on MN10300_TTYSM2 - -config MN10300_TTYSM2_TIMER9 - bool "Use timer 9 (16-bit)" - depends on !(AM33_2 || AM33_3) - -config MN10300_TTYSM2_TIMER1 - bool "Use timer 1 (8-bit)" - depends on !(AM33_2 || AM33_3) - -config MN10300_TTYSM2_TIMER3 - bool "Use timer 3 (8-bit)" - depends on !(AM33_2 || AM33_3) - -config MN10300_TTYSM2_TIMER10 - bool "Use timer 10 (16-bit)" - depends on AM33_2 || AM33_3 - -endchoice - -config MN10300_TTYSM2_CTS - bool "Enable the use of the CTS line /dev/ttySM2" - depends on MN10300_TTYSM2 && AM33_2 - -endmenu - -menu "Interrupt request priority options" - -comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)" - -comment "____Non-maskable interrupt levels____" -comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial" - -config DEBUGGER_IRQ_LEVEL - int "DEBUGGER interrupt priority" - depends on KERNEL_DEBUGGER - range 0 1 if LINUX_CLI_LEVEL = 2 - range 0 2 if LINUX_CLI_LEVEL = 3 - range 0 3 if LINUX_CLI_LEVEL = 4 - range 0 4 if LINUX_CLI_LEVEL = 5 - range 0 5 if LINUX_CLI_LEVEL = 6 - default 0 - -comment "The following must be set to a higher priority than local_irq_disable()" - -config MN10300_SERIAL_IRQ_LEVEL - int "MN10300 on-chip serial interrupt priority" - depends on MN10300_TTYSM - range 1 1 if LINUX_CLI_LEVEL = 2 - range 1 2 if LINUX_CLI_LEVEL = 3 - range 1 3 if LINUX_CLI_LEVEL = 4 - range 1 4 if LINUX_CLI_LEVEL = 5 - range 1 5 if LINUX_CLI_LEVEL = 6 - default 1 - -comment "-" -comment "____Maskable interrupt levels____" - -config LINUX_CLI_LEVEL - int "The highest interrupt priority excluded by local_irq_disable() (2-6)" - range 2 6 - default 2 - help - local_irq_disable() doesn't actually disable maskable interrupts - - what it does is restrict the levels of interrupt which are permitted - (a lower level indicates a higher priority) by lowering the value in - EPSW.IM from 7. Any interrupt is permitted for which the level is - lower than EPSW.IM. - - Certain interrupts, such as DEBUGGER and virtual MN10300 on-chip - serial DMA interrupts are allowed to interrupt normal disabled - sections. - -comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL" - -config TIMER_IRQ_LEVEL - int "Kernel timer interrupt priority" - range LINUX_CLI_LEVEL 6 - default 4 - -config PCI_IRQ_LEVEL - int "PCI interrupt priority" - depends on PCI - range LINUX_CLI_LEVEL 6 - default 5 - -config ETHERNET_IRQ_LEVEL - int "Ethernet interrupt priority" - depends on SMC91X || SMC911X || SMSC911X - range LINUX_CLI_LEVEL 6 - default 6 - -config EXT_SERIAL_IRQ_LEVEL - int "External serial port interrupt priority" - depends on SERIAL_8250 - range LINUX_CLI_LEVEL 6 - default 6 - -endmenu - -source "mm/Kconfig" - -menu "Power management options" -source kernel/power/Kconfig -endmenu - -endmenu - - -menu "Executable formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/mn10300/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug deleted file mode 100644 index 37ada651f756..000000000000 --- a/arch/mn10300/Kconfig.debug +++ /dev/null @@ -1,156 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config DEBUG_DECOMPRESS_KERNEL - bool "Using serial port during decompressing kernel" - depends on DEBUG_KERNEL - default n - help - If you say Y here you will confirm the start and the end of - decompressing Linux seeing "Uncompressing Linux... " and - "Ok, booting the kernel.\n" on console. - -config TEST_MISALIGNMENT_HANDLER - bool "Run tests on the misalignment handler" - depends on DEBUG_KERNEL - default n - help - If you say Y here the kernel will execute a list of misaligned memory - accesses to make sure the misalignment handler deals them with - correctly. If it does not, the kernel will throw a BUG. - -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - -config GDBSTUB - bool "Remote GDB kernel debugging" - depends on DEBUG_KERNEL && DEPRECATED - select DEBUG_INFO - select FRAME_POINTER - help - If you say Y here, it will be possible to remotely debug the kernel - using gdb. This enlarges your kernel ELF image disk size by several - megabytes and requires a machine with more than 16 MB, better 32 MB - RAM to avoid excessive linking time. This is only useful for kernel - hackers. If unsure, say N. - - This is deprecated in favour of KGDB and will be removed in a later - version. - -config GDBSTUB_IMMEDIATE - bool "Break into GDB stub immediately" - depends on GDBSTUB - help - If you say Y here, GDB stub will break into the program as soon as - possible, leaving the program counter at the beginning of - start_kernel() in init/main.c. - -config GDBSTUB_ALLOW_SINGLE_STEP - bool "Allow software single-stepping in GDB stub" - depends on GDBSTUB && !SMP && !PREEMPT - help - Allow GDB stub to perform software single-stepping through the - kernel. This doesn't work very well on SMP or preemptible kernels as - it uses temporary breakpoints to emulate single-stepping. - -config GDB_CONSOLE - bool "Console output to GDB" - depends on GDBSTUB - help - If you are using GDB for remote debugging over a serial port and - would like kernel messages to be formatted into GDB $O packets so - that GDB prints them as program output, say 'Y'. - -config GDBSTUB_DEBUGGING - bool "Debug GDB stub by messages to serial port" - depends on GDBSTUB - help - This causes debugging messages to be displayed at various points - during execution of the GDB stub routines. Such messages will be - displayed on ttyS0 if that isn't the GDB stub's port, or ttySM0 - otherwise. - -config GDBSTUB_DEBUG_ENTRY - bool "Debug GDB stub entry" - depends on GDBSTUB_DEBUGGING - help - This option causes information to be displayed about entry to or exit - from the main GDB stub routine. - -config GDBSTUB_DEBUG_PROTOCOL - bool "Debug GDB stub protocol" - depends on GDBSTUB_DEBUGGING - help - This option causes information to be displayed about the GDB remote - protocol messages generated exchanged with GDB. - -config GDBSTUB_DEBUG_IO - bool "Debug GDB stub I/O" - depends on GDBSTUB_DEBUGGING - help - This option causes information to be displayed about GDB stub's - low-level I/O. - -config GDBSTUB_DEBUG_BREAKPOINT - bool "Debug GDB stub breakpoint management" - depends on GDBSTUB_DEBUGGING - help - This option causes information to be displayed about GDB stub's - breakpoint management. - -choice - prompt "GDB stub port" - default GDBSTUB_ON_TTYSM0 - depends on GDBSTUB - help - Select the serial port used for GDB-stub. - -config GDBSTUB_ON_TTYSM0 - bool "/dev/ttySM0 [SIF0]" - depends on MN10300_TTYSM0 - select GDBSTUB_ON_TTYSMx - -config GDBSTUB_ON_TTYSM1 - bool "/dev/ttySM1 [SIF1]" - depends on MN10300_TTYSM1 - select GDBSTUB_ON_TTYSMx - -config GDBSTUB_ON_TTYSM2 - bool "/dev/ttySM2 [SIF2]" - depends on MN10300_TTYSM2 - select GDBSTUB_ON_TTYSMx - -config GDBSTUB_ON_TTYS0 - bool "/dev/ttyS0" - select GDBSTUB_ON_TTYSx - -config GDBSTUB_ON_TTYS1 - bool "/dev/ttyS1" - select GDBSTUB_ON_TTYSx - -endchoice - -config GDBSTUB_ON_TTYSMx - bool - depends on GDBSTUB_ON_TTYSM0 || GDBSTUB_ON_TTYSM1 || GDBSTUB_ON_TTYSM2 - default y - -config GDBSTUB_ON_TTYSx - bool - depends on GDBSTUB_ON_TTYS0 || GDBSTUB_ON_TTYS1 - default y - -endmenu - -config KERNEL_DEBUGGER - def_bool y - depends on GDBSTUB || KGDB diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile deleted file mode 100644 index 3f1ea5ddc402..000000000000 --- a/arch/mn10300/Makefile +++ /dev/null @@ -1,99 +0,0 @@ -############################################################################### -# -# MN10300 Kernel makefile system specifications -# -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Modified by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### - -KBUILD_DEFCONFIG := asb2303_defconfig - -CCSPECS := $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-) -CCDIR := $(strip $(patsubst %/specs,%,$(CCSPECS))) -KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include - -LDFLAGS := -OBJCOPYFLAGS := -O binary -R .note -R .comment -R .GCC-command-line -R .note.gnu.build-id -S -#LDFLAGS_vmlinux := -Map linkmap.txt -CHECKFLAGS += - -PROCESSOR := unset -UNIT := unset - -KBUILD_CFLAGS += -mam33 -DCPU=AM33 $(call cc-option,-mmem-funcs,) -KBUILD_AFLAGS += -mam33 -DCPU=AM33 - -ifeq ($(CONFIG_MN10300_CURRENT_IN_E2),y) -KBUILD_CFLAGS += -ffixed-e2 -fcall-saved-e5 -endif - -ifeq ($(CONFIG_MN10300_PROC_MN103E010),y) -PROCESSOR := mn103e010 -endif -ifeq ($(CONFIG_MN10300_PROC_MN2WS0050),y) -PROCESSOR := mn2ws0050 -endif - -ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y) -UNIT := asb2303 -endif -ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y) -UNIT := asb2305 -endif -ifeq ($(CONFIG_MN10300_UNIT_ASB2364),y) -UNIT := asb2364 -endif - - -head-y := arch/mn10300/kernel/head.o - -core-y += arch/mn10300/kernel/ arch/mn10300/mm/ - -ifneq ($(PROCESSOR),unset) -core-y += arch/mn10300/proc-$(PROCESSOR)/ -endif -ifneq ($(UNIT),unset) -core-y += arch/mn10300/unit-$(UNIT)/ -endif -libs-y += arch/mn10300/lib/ - -drivers-$(CONFIG_OPROFILE) += arch/mn10300/oprofile/ - -boot := arch/mn10300/boot - -.PHONY: zImage - -KBUILD_IMAGE := $(boot)/zImage -CLEAN_FILES += $(boot)/zImage -CLEAN_FILES += $(boot)/compressed/vmlinux -CLEAN_FILES += $(boot)/compressed/vmlinux.bin -CLEAN_FILES += $(boot)/compressed/vmlinux.bin.gz - -zImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -all: zImage - -bootstrap: - $(Q)$(MAKEBOOT) bootstrap - -archclean: - $(Q)$(MAKE) $(clean)=arch/mn10300/proc-mn103e010 - $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2303 - $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2305 - -define archhelp - echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' -endef - -# -# include the appropriate processor- and unit-specific headers -# -KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/proc-$(PROCESSOR)/include -KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/unit-$(UNIT)/include diff --git a/arch/mn10300/boot/.gitignore b/arch/mn10300/boot/.gitignore deleted file mode 100644 index b6718de23693..000000000000 --- a/arch/mn10300/boot/.gitignore +++ /dev/null @@ -1 +0,0 @@ -zImage diff --git a/arch/mn10300/boot/Makefile b/arch/mn10300/boot/Makefile deleted file mode 100644 index 36c9caf8ea0a..000000000000 --- a/arch/mn10300/boot/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# MN10300 kernel compressor and wrapper -# -# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# - -targets := vmlinux.bin zImage - -subdir- := compressed - -# --------------------------------------------------------------------------- - - -$(obj)/zImage: $(obj)/compressed/vmlinux FORCE - $(call if_changed,objcopy) - @echo 'Kernel: $@ is ready' - -$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE - $(call if_changed,objcopy) - -$(obj)/compressed/vmlinux: FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ diff --git a/arch/mn10300/boot/compressed/Makefile b/arch/mn10300/boot/compressed/Makefile deleted file mode 100644 index 9b9a48fc8e53..000000000000 --- a/arch/mn10300/boot/compressed/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Create a compressed vmlinux image from the original vmlinux -# - -targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o - -LDFLAGS_vmlinux := -Ttext $(CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS) -e startup_32 - -$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE - $(call if_changed,ld) - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) - -LDFLAGS_piggy.o := -r --format binary --oformat elf32-am33lin -T - -$(obj)/piggy.o: $(obj)/vmlinux.lds $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S deleted file mode 100644 index 7b50345b9e84..000000000000 --- a/arch/mn10300/boot/compressed/head.S +++ /dev/null @@ -1,151 +0,0 @@ -/* Boot entry point for a compressed MN10300 kernel - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - .section .text - -#define DEBUG - -#include -#include -#include -#ifdef CONFIG_SMP -#include -#endif - - .globl startup_32 -startup_32: -#ifdef CONFIG_SMP - # - # Secondary CPUs jump directly to the kernel entry point - # - # Must save primary CPU's D0-D2 registers as they hold boot parameters - # - mov (CPUID), d3 - and CPUID_MASK,d3 - beq startup_primary - mov CONFIG_KERNEL_TEXT_ADDRESS,a0 - jmp (a0) - -startup_primary: -#endif /* CONFIG_SMP */ - - # first save parameters from bootloader - mov param_save_area,a0 - mov d0,(a0) - mov d1,(4,a0) - mov d2,(8,a0) - - mov sp,a3 - mov decomp_stack+0x2000-4,a0 - mov a0,sp - - # invalidate and enable both of the caches - mov CHCTR,a0 - clr d0 - movhu d0,(a0) # turn off first - mov CHCTR_ICINV|CHCTR_DCINV,d0 - movhu d0,(a0) - setlb - mov (a0),d0 - btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy - lne - -#ifdef CONFIG_MN10300_CACHE_ENABLED -#ifdef CONFIG_MN10300_CACHE_WBACK - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 -#endif /* WBACK */ - movhu d0,(a0) # enable -#endif /* !ENABLED */ - - # clear the BSS area - mov __bss_start,a0 - mov _end,a1 - clr d0 -bssclear: - cmp a1,a0 - bge bssclear_end - movbu d0,(a0) - inc a0 - bra bssclear -bssclear_end: - - # decompress the kernel - call decompress_kernel[],0 -#ifdef CONFIG_MN10300_CACHE_WBACK - call mn10300_dcache_flush_inv[],0 -#endif - - # disable caches again - mov CHCTR,a0 - clr d0 - movhu d0,(a0) - setlb - mov (a0),d0 - btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy - lne - - mov param_save_area,a0 - mov (a0),d0 - mov (4,a0),d1 - mov (8,a0),d2 - - # jump to the kernel proper entry point - mov a3,sp - mov CONFIG_KERNEL_TEXT_ADDRESS,a0 - jmp (a0) - - -############################################################################### -# -# Cache flush routines -# -############################################################################### -#ifdef CONFIG_MN10300_CACHE_WBACK -mn10300_dcache_flush_inv: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_dcache_flush_inv_end - - mov L1_CACHE_NENTRIES,d1 - clr a1 - -mn10300_dcache_flush_inv_loop: - mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge - mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge - mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge - mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge - - add L1_CACHE_BYTES,a1 - add -1,d1 - bne mn10300_dcache_flush_inv_loop - -mn10300_dcache_flush_inv_end: - ret [],0 -#endif /* CONFIG_MN10300_CACHE_WBACK */ - - -############################################################################### -# -# Data areas -# -############################################################################### - .data - .align 4 -param_save_area: - .rept 3 - .word 0 - .endr - - .section .bss - .align 4 -decomp_stack: - .space 0x2000 diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c deleted file mode 100644 index 42cbd77bd439..000000000000 --- a/arch/mn10300/boot/compressed/misc.c +++ /dev/null @@ -1,393 +0,0 @@ -/* MN10300 Miscellaneous helper routines for kernel decompressor - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - Derived from arch/x86/boot/compressed/misc_32.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include "misc.h" - -#ifndef CONFIG_GDBSTUB_ON_TTYSx -/* display 'Uncompressing Linux... ' messages on ttyS0 or ttyS1 */ -#if 1 /* ttyS0 */ -#define CYG_DEV_BASE 0xA6FB0000 -#else /* ttyS1 */ -#define CYG_DEV_BASE 0xA6FC0000 -#endif - -#define CYG_DEV_THR (*((volatile __u8*)(CYG_DEV_BASE + 0x00))) -#define CYG_DEV_MCR (*((volatile __u8*)(CYG_DEV_BASE + 0x10))) -#define SIO_MCR_DTR 0x01 -#define SIO_MCR_RTS 0x02 -#define CYG_DEV_LSR (*((volatile __u8*)(CYG_DEV_BASE + 0x14))) -#define SIO_LSR_THRE 0x20 /* transmitter holding register empty */ -#define SIO_LSR_TEMT 0x40 /* transmitter register empty */ -#define CYG_DEV_MSR (*((volatile __u8*)(CYG_DEV_BASE + 0x18))) -#define SIO_MSR_CTS 0x10 /* clear to send */ -#define SIO_MSR_DSR 0x20 /* data set ready */ - -#define LSR_WAIT_FOR(STATE) \ - do { while (!(CYG_DEV_LSR & SIO_LSR_##STATE)) {} } while (0) -#define FLOWCTL_QUERY(LINE) \ - ({ CYG_DEV_MSR & SIO_MSR_##LINE; }) -#define FLOWCTL_WAIT_FOR(LINE) \ - do { while (!(CYG_DEV_MSR & SIO_MSR_##LINE)) {} } while (0) -#define FLOWCTL_CLEAR(LINE) \ - do { CYG_DEV_MCR &= ~SIO_MCR_##LINE; } while (0) -#define FLOWCTL_SET(LINE) \ - do { CYG_DEV_MCR |= SIO_MCR_##LINE; } while (0) -#endif - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -#undef memset -#undef memcpy - -static inline void *memset(const void *s, int c, size_t n) -{ - int i; - char *ss = (char *) s; - - for (i = 0; i < n; i++) - ss[i] = c; - return (void *)s; -} - -#define memzero(s, n) memset((s), 0, (n)) - -static inline void *memcpy(void *__dest, const void *__src, size_t __n) -{ - int i; - const char *s = __src; - char *d = __dest; - - for (i = 0; i < __n; i++) - d[i] = s[i]; - return __dest; -} - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, and a power of - * two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* sliding window buffer */ - -static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to be processed in inbuf */ -static unsigned outcnt; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond, msg) { if (!(cond)) error(msg); } -# define Trace(x) fprintf x -# define Tracev(x) { if (verbose) fprintf x ; } -# define Tracevv(x) { if (verbose > 1) fprintf x ; } -# define Tracec(c, x) { if (verbose && (c)) fprintf x ; } -# define Tracecv(c, x) { if (verbose > 1 && (c)) fprintf x ; } -#else -# define Assert(cond, msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c, x) -# define Tracecv(c, x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); -static void error(const char *) __attribute__((noreturn)); -static void kputs(const char *); - -static inline unsigned char get_byte(void) -{ - unsigned char ch = inptr < insize ? inbuf[inptr++] : fill_inbuf(); - -#if 0 - char hex[3]; - hex[0] = ((ch & 0x0f) > 9) ? - ((ch & 0x0f) + 'A' - 0xa) : ((ch & 0x0f) + '0'); - hex[1] = ((ch >> 4) > 9) ? - ((ch >> 4) + 'A' - 0xa) : ((ch >> 4) + '0'); - hex[2] = 0; - kputs(hex); -#endif - return ch; -} - -/* - * This is set up by the setup-routine at boot-time - */ -#define EXT_MEM_K (*(unsigned short *)0x90002) -#ifndef STANDARD_MEMORY_BIOS_CALL -#define ALT_MEM_K (*(unsigned long *) 0x901e0) -#endif -#define SCREEN_INFO (*(struct screen_info *)0x90000) - -static long bytes_out; -static uch *output_data; -static unsigned long output_ptr; - - -static unsigned long free_mem_ptr = (unsigned long) &end; -static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000; - -#define INPLACE_MOVE_ROUTINE 0x1000 -#define LOW_BUFFER_START 0x2000 -#define LOW_BUFFER_END 0x90000 -#define LOW_BUFFER_SIZE (LOW_BUFFER_END - LOW_BUFFER_START) -#define HEAP_SIZE 0x3000 -static int high_loaded; -static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/; - -static char *vidmem = (char *)0xb8000; -static int lines, cols; - -#define BOOTLOADER_INFLATE -#include "../../../../lib/inflate.c" - -static inline void scroll(void) -{ - int i; - - memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2); - for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2) - vidmem[i] = ' '; -} - -static inline void kputchar(unsigned char ch) -{ -#ifdef CONFIG_MN10300_UNIT_ASB2305 - while (SC0STR & SC01STR_TBF) - continue; - - if (ch == 0x0a) { - SC0TXB = 0x0d; - while (SC0STR & SC01STR_TBF) - continue; - } - - SC0TXB = ch; - -#else - while (SC1STR & SC01STR_TBF) - continue; - - if (ch == 0x0a) { - SC1TXB = 0x0d; - while (SC1STR & SC01STR_TBF) - continue; - } - - SC1TXB = ch; - -#endif -} - -static void kputs(const char *s) -{ -#ifdef CONFIG_DEBUG_DECOMPRESS_KERNEL -#ifndef CONFIG_GDBSTUB_ON_TTYSx - char ch; - - FLOWCTL_SET(DTR); - - while (*s) { - LSR_WAIT_FOR(THRE); - - ch = *s++; - if (ch == 0x0a) { - CYG_DEV_THR = 0x0d; - LSR_WAIT_FOR(THRE); - } - CYG_DEV_THR = ch; - } - - FLOWCTL_CLEAR(DTR); -#else - - for (; *s; s++) - kputchar(*s); - -#endif -#endif /* CONFIG_DEBUG_DECOMPRESS_KERNEL */ -} - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -static int fill_inbuf() -{ - if (insize != 0) - error("ran out of input data\n"); - - inbuf = input_data; - insize = input_len; - inptr = 1; - return inbuf[0]; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void flush_window_low(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void flush_window_high(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, ch; - in = window; - for (n = 0; n < outcnt; n++) { - ch = *output_data++ = *in++; - if ((ulg) output_data == LOW_BUFFER_END) - output_data = high_buffer_start; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - outcnt = 0; -} - -static void flush_window(void) -{ - if (high_loaded) - flush_window_high(); - else - flush_window_low(); -} - -static void error(const char *x) -{ - kputs("\n\n"); - kputs(x); - kputs("\n\n -- System halted"); - - while (1) - /* Halt */; -} - -#define STACK_SIZE (4096) - -long user_stack[STACK_SIZE]; - -struct { - long *a; - short b; -} stack_start = { &user_stack[STACK_SIZE], 0 }; - -void setup_normal_output_buffer(void) -{ -#ifdef STANDARD_MEMORY_BIOS_CALL - if (EXT_MEM_K < 1024) - error("Less than 2MB of memory.\n"); -#else - if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024) - error("Less than 2MB of memory.\n"); -#endif - output_data = (char *) 0x100000; /* Points to 1M */ -} - -struct moveparams { - uch *low_buffer_start; - int lcount; - uch *high_buffer_start; - int hcount; -}; - -void setup_output_buffer_if_we_run_high(struct moveparams *mv) -{ - high_buffer_start = (uch *)(((ulg) &end) + HEAP_SIZE); -#ifdef STANDARD_MEMORY_BIOS_CALL - if (EXT_MEM_K < (3 * 1024)) - error("Less than 4MB of memory.\n"); -#else - if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3 * 1024)) - error("Less than 4MB of memory.\n"); -#endif - mv->low_buffer_start = output_data = (char *) LOW_BUFFER_START; - high_loaded = 1; - free_mem_end_ptr = (long) high_buffer_start; - if (0x100000 + LOW_BUFFER_SIZE > (ulg) high_buffer_start) { - high_buffer_start = (uch *)(0x100000 + LOW_BUFFER_SIZE); - mv->hcount = 0; /* say: we need not to move high_buffer */ - } else { - mv->hcount = -1; - } - mv->high_buffer_start = high_buffer_start; -} - -void close_output_buffer_if_we_run_high(struct moveparams *mv) -{ - mv->lcount = bytes_out; - if (bytes_out > LOW_BUFFER_SIZE) { - mv->lcount = LOW_BUFFER_SIZE; - if (mv->hcount) - mv->hcount = bytes_out - LOW_BUFFER_SIZE; - } else { - mv->hcount = 0; - } -} - -#undef DEBUGFLAG -#ifdef DEBUGFLAG -int debugflag; -#endif - -int decompress_kernel(struct moveparams *mv) -{ -#ifdef DEBUGFLAG - while (!debugflag) - barrier(); -#endif - - output_data = (char *) CONFIG_KERNEL_TEXT_ADDRESS; - - makecrc(); - kputs("Uncompressing Linux... "); - gunzip(); - kputs("Ok, booting the kernel.\n"); - return 0; -} diff --git a/arch/mn10300/boot/compressed/misc.h b/arch/mn10300/boot/compressed/misc.h deleted file mode 100644 index da921cd172fb..000000000000 --- a/arch/mn10300/boot/compressed/misc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* Internal definitions for the MN10300 kernel decompressor - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -extern int end; - -/* - * vmlinux.lds - */ -extern char input_data[]; -extern int input_len; diff --git a/arch/mn10300/boot/compressed/vmlinux.lds b/arch/mn10300/boot/compressed/vmlinux.lds deleted file mode 100644 index a084903603fe..000000000000 --- a/arch/mn10300/boot/compressed/vmlinux.lds +++ /dev/null @@ -1,9 +0,0 @@ -SECTIONS -{ - .data : { - input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - input_data_end = .; - } -} diff --git a/arch/mn10300/boot/install.sh b/arch/mn10300/boot/install.sh deleted file mode 100644 index abba30971191..000000000000 --- a/arch/mn10300/boot/install.sh +++ /dev/null @@ -1,67 +0,0 @@ -#!/bin/sh -# -# arch/mn10300/boot/install -c.sh -# -# This file is subject to the terms and conditions of the GNU General Public -# Licence. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1995 by Linus Torvalds -# -# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin -# -# "make install -c" script for i386 architecture -# -# Arguments: -# $1 - kernel version -# $2 - kernel image file -# $3 - kernel map file -# $4 - default install -c path (blank if root directory) -# $5 - boot rom file -# - -# User may have a custom install -c script - -rm -fr $4/../usr/include/linux $4/../usr/include/asm -install -c -m 0755 $2 $4/vmlinuz -install -c -m 0755 $5 $4/boot.rom -install -c -m 0755 -d $4/../usr/include/linux -cd ${srctree}/include/linux -for i in `find . -maxdepth 1 -name '*.h' -print`; do - install -c -m 0644 $i $4/../usr/include/linux -done -install -c -m 0755 -d $4/../usr/include/linux/byteorder -cd ${srctree}/include/linux/byteorder -for i in `find . -name '*.h' -print`; do - install -c -m 0644 $i $4/../usr/include/linux/byteorder -done -install -c -m 0755 -d $4/../usr/include/linux/lockd -cd ${srctree}/include/linux/lockd -for i in `find . -name '*.h' -print`; do - install -c -m 0644 $i $4/../usr/include/linux/lockd -done -install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4 -cd ${srctree}/include/linux/netfilter_ipv4 -for i in `find . -name '*.h' -print`; do - install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4 -done -install -c -m 0755 -d $4/../usr/include/linux/nfsd -cd ${srctree}/include/linux/nfsd -for i in `find . -name '*.h' -print`; do - install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i -done -install -c -m 0755 -d $4/../usr/include/linux/raid -cd ${srctree}/include/linux/raid -for i in `find . -name '*.h' -print`; do - install -c -m 0644 $i $4/../usr/include/linux/raid -done -install -c -m 0755 -d $4/../usr/include/linux/sunrpc -cd ${srctree}/include/linux/sunrpc -for i in `find . -name '*.h' -print`; do - install -c -m 0644 $i $4/../usr/include/linux/sunrpc -done -install -c -m 0755 -d $4/../usr/include/asm -cd ${srctree}/include/asm -for i in `find . -name '*.h' -print`; do - install -c -m 0644 $i $4/../usr/include/asm -done diff --git a/arch/mn10300/boot/tools/build.c b/arch/mn10300/boot/tools/build.c deleted file mode 100644 index 3ce158fe07b0..000000000000 --- a/arch/mn10300/boot/tools/build.c +++ /dev/null @@ -1,191 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 1997 Martin Mares - */ - -/* - * This file builds a disk-image from three different files: - * - * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest - * - setup: 8086 machine code, sets up system parm - * - system: 80386 code for actual system - * - * It does some checking that all files are of the correct type, and - * just writes the result to stdout, removing headers and padding to - * the right amount. It also writes some system data to stderr. - */ - -/* - * Changes by tytso to allow root device specification - * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 - * Cross compiling fixes by Gertjan van Wingerde, July 1996 - * Rewritten by Martin Mares, April 1997 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEFAULT_MAJOR_ROOT 0 -#define DEFAULT_MINOR_ROOT 0 - -/* Minimal number of setup sectors (see also bootsect.S) */ -#define SETUP_SECTS 4 - -uint8_t buf[1024]; -int fd; -int is_big_kernel; - -__attribute__((noreturn)) -void die(const char *str, ...) -{ - va_list args; - va_start(args, str); - vfprintf(stderr, str, args); - fputc('\n', stderr); - exit(1); -} - -void file_open(const char *name) -{ - fd = open(name, O_RDONLY, 0); - if (fd < 0) - die("Unable to open `%s': %m", name); -} - -__attribute__((noreturn)) -void usage(void) -{ - die("Usage: build [-b] bootsect setup system [rootdev] [> image]"); -} - -int main(int argc, char **argv) -{ - unsigned int i, c, sz, setup_sectors; - uint32_t sys_size; - uint8_t major_root, minor_root; - struct stat sb; - - if (argc > 2 && !strcmp(argv[1], "-b")) { - is_big_kernel = 1; - argc--, argv++; - } - if ((argc < 4) || (argc > 5)) - usage(); - if (argc > 4) { - if (!strcmp(argv[4], "CURRENT")) { - if (stat("/", &sb)) { - perror("/"); - die("Couldn't stat /"); - } - major_root = major(sb.st_dev); - minor_root = minor(sb.st_dev); - } else if (strcmp(argv[4], "FLOPPY")) { - if (stat(argv[4], &sb)) { - perror(argv[4]); - die("Couldn't stat root device."); - } - major_root = major(sb.st_rdev); - minor_root = minor(sb.st_rdev); - } else { - major_root = 0; - minor_root = 0; - } - } else { - major_root = DEFAULT_MAJOR_ROOT; - minor_root = DEFAULT_MINOR_ROOT; - } - fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root); - - file_open(argv[1]); - i = read(fd, buf, sizeof(buf)); - fprintf(stderr, "Boot sector %d bytes.\n", i); - if (i != 512) - die("Boot block must be exactly 512 bytes"); - if (buf[510] != 0x55 || buf[511] != 0xaa) - die("Boot block hasn't got boot flag (0xAA55)"); - buf[508] = minor_root; - buf[509] = major_root; - if (write(1, buf, 512) != 512) - die("Write call failed"); - close(fd); - - /* Copy the setup code */ - file_open(argv[2]); - for (i = 0; (c = read(fd, buf, sizeof(buf))) > 0; i += c) - if (write(1, buf, c) != c) - die("Write call failed"); - if (c != 0) - die("read-error on `setup'"); - close(fd); - - /* Pad unused space with zeros */ - setup_sectors = (i + 511) / 512; - /* for compatibility with ancient versions of LILO. */ - if (setup_sectors < SETUP_SECTS) - setup_sectors = SETUP_SECTS; - fprintf(stderr, "Setup is %d bytes.\n", i); - memset(buf, 0, sizeof(buf)); - while (i < setup_sectors * 512) { - c = setup_sectors * 512 - i; - if (c > sizeof(buf)) - c = sizeof(buf); - if (write(1, buf, c) != c) - die("Write call failed"); - i += c; - } - - file_open(argv[3]); - if (fstat(fd, &sb)) - die("Unable to stat `%s': %m", argv[3]); - sz = sb.st_size; - fprintf(stderr, "System is %d kB\n", sz / 1024); - sys_size = (sz + 15) / 16; - /* 0x28000*16 = 2.5 MB, conservative estimate for the current maximum */ - if (sys_size > (is_big_kernel ? 0x28000 : DEF_SYSSIZE)) - die("System is too big. Try using %smodules.", - is_big_kernel ? "" : "bzImage or "); - if (sys_size > 0xffff) - fprintf(stderr, - "warning: kernel is too big for standalone boot " - "from floppy\n"); - while (sz > 0) { - int l, n; - - l = (sz > sizeof(buf)) ? sizeof(buf) : sz; - n = read(fd, buf, l); - if (n != l) { - if (n < 0) - die("Error reading %s: %m", argv[3]); - else - die("%s: Unexpected EOF", argv[3]); - } - if (write(1, buf, l) != l) - die("Write failed"); - sz -= l; - } - close(fd); - - /* Write sizes to the bootsector */ - if (lseek(1, 497, SEEK_SET) != 497) - die("Output: seek failed"); - buf[0] = setup_sectors; - if (write(1, buf, 1) != 1) - die("Write of setup sector count failed"); - if (lseek(1, 500, SEEK_SET) != 500) - die("Output: seek failed"); - buf[0] = (sys_size & 0xff); - buf[1] = ((sys_size >> 8) & 0xff); - if (write(1, buf, 2) != 2) - die("Write of image length failed"); - - return 0; -} diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig deleted file mode 100644 index d06dae131139..000000000000 --- a/arch/mn10300/configs/asb2303_defconfig +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -CONFIG_PROFILING=y -# CONFIG_BLOCK is not set -CONFIG_PREEMPT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MN10300_RTC=y -CONFIG_MN10300_TTYSM_CONSOLE=y -CONFIG_MN10300_TTYSM0=y -CONFIG_MN10300_TTYSM1=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CFI_I4=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_WLAN is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_HW_RANDOM is not set -CONFIG_RTC=y -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_PROC_KCORE=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_STRIP_ASM_SYMS=y diff --git a/arch/mn10300/configs/asb2364_defconfig b/arch/mn10300/configs/asb2364_defconfig deleted file mode 100644 index a84c3153f22a..000000000000 --- a/arch/mn10300/configs/asb2364_defconfig +++ /dev/null @@ -1,87 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CGROUPS=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLOCK is not set -CONFIG_MN10300_UNIT_ASB2364=y -CONFIG_PREEMPT=y -# CONFIG_MN10300_USING_JTAG is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MN10300_TTYSM_CONSOLE=y -CONFIG_MN10300_TTYSM0=y -CONFIG_MN10300_TTYSM0_TIMER2=y -CONFIG_MN10300_TTYSM1=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CFI_I4=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_PROC_KCORE=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild deleted file mode 100644 index 509c45a75d1f..000000000000 --- a/arch/mn10300/include/asm/Kbuild +++ /dev/null @@ -1,13 +0,0 @@ - -generic-y += barrier.h -generic-y += device.h -generic-y += exec.h -generic-y += extable.h -generic-y += fb.h -generic-y += irq_work.h -generic-y += mcs_spinlock.h -generic-y += mm-arch-hooks.h -generic-y += preempt.h -generic-y += sections.h -generic-y += trace_clock.h -generic-y += word-at-a-time.h diff --git a/arch/mn10300/include/asm/asm-offsets.h b/arch/mn10300/include/asm/asm-offsets.h deleted file mode 100644 index d370ee36a182..000000000000 --- a/arch/mn10300/include/asm/asm-offsets.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h deleted file mode 100644 index 36389efd45e8..000000000000 --- a/arch/mn10300/include/asm/atomic.h +++ /dev/null @@ -1,161 +0,0 @@ -/* MN10300 Atomic counter operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_ATOMIC_H -#define _ASM_ATOMIC_H - -#include -#include -#include - -#ifndef CONFIG_SMP -#include -#else - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ - -/** - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. Note that the guaranteed - */ -#define atomic_read(v) READ_ONCE((v)->counter) - -/** - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. Note that the guaranteed - */ -#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i)) - -#define ATOMIC_OP(op) \ -static inline void atomic_##op(int i, atomic_t *v) \ -{ \ - int retval, status; \ - \ - asm volatile( \ - "1: mov %4,(_AAR,%3) \n" \ - " mov (_ADR,%3),%1 \n" \ - " " #op " %5,%1 \n" \ - " mov %1,(_ADR,%3) \n" \ - " mov (_ADR,%3),%0 \n" /* flush */ \ - " mov (_ASR,%3),%0 \n" \ - " or %0,%0 \n" \ - " bne 1b \n" \ - : "=&r"(status), "=&r"(retval), "=m"(v->counter) \ - : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) \ - : "memory", "cc"); \ -} - -#define ATOMIC_OP_RETURN(op) \ -static inline int atomic_##op##_return(int i, atomic_t *v) \ -{ \ - int retval, status; \ - \ - asm volatile( \ - "1: mov %4,(_AAR,%3) \n" \ - " mov (_ADR,%3),%1 \n" \ - " " #op " %5,%1 \n" \ - " mov %1,(_ADR,%3) \n" \ - " mov (_ADR,%3),%0 \n" /* flush */ \ - " mov (_ASR,%3),%0 \n" \ - " or %0,%0 \n" \ - " bne 1b \n" \ - : "=&r"(status), "=&r"(retval), "=m"(v->counter) \ - : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) \ - : "memory", "cc"); \ - return retval; \ -} - -#define ATOMIC_FETCH_OP(op) \ -static inline int atomic_fetch_##op(int i, atomic_t *v) \ -{ \ - int retval, status; \ - \ - asm volatile( \ - "1: mov %4,(_AAR,%3) \n" \ - " mov (_ADR,%3),%1 \n" \ - " mov %1,%0 \n" \ - " " #op " %5,%0 \n" \ - " mov %0,(_ADR,%3) \n" \ - " mov (_ADR,%3),%0 \n" /* flush */ \ - " mov (_ASR,%3),%0 \n" \ - " or %0,%0 \n" \ - " bne 1b \n" \ - : "=&r"(status), "=&r"(retval), "=m"(v->counter) \ - : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) \ - : "memory", "cc"); \ - return retval; \ -} - -#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op) - -ATOMIC_OPS(add) -ATOMIC_OPS(sub) - -#undef ATOMIC_OPS -#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op) - -ATOMIC_OPS(and) -ATOMIC_OPS(or) -ATOMIC_OPS(xor) - -#undef ATOMIC_OPS -#undef ATOMIC_FETCH_OP -#undef ATOMIC_OP_RETURN -#undef ATOMIC_OP - -static inline int atomic_add_negative(int i, atomic_t *v) -{ - return atomic_add_return(i, v) < 0; -} - -static inline void atomic_inc(atomic_t *v) -{ - atomic_add_return(1, v); -} - -static inline void atomic_dec(atomic_t *v) -{ - atomic_sub_return(1, v); -} - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) - -#define __atomic_add_unless(v, a, u) \ -({ \ - int c, old; \ - c = atomic_read(v); \ - while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ - c = old; \ - c; \ -}) - -#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) - -#endif /* __KERNEL__ */ -#endif /* CONFIG_SMP */ -#endif /* _ASM_ATOMIC_H */ diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h deleted file mode 100644 index fe6f8e2c3617..000000000000 --- a/arch/mn10300/include/asm/bitops.h +++ /dev/null @@ -1,232 +0,0 @@ -/* MN10300 bit operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * These have to be done with inline assembly: that way the bit-setting - * is guaranteed to be atomic. All bit operations return 0 if the bit - * was cleared before the operation and != 0 if it was not. - * - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ -#ifndef __ASM_BITOPS_H -#define __ASM_BITOPS_H - -#include -#include - -/* - * set bit - */ -#define __set_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - _a += (nr) >> 3; \ - \ - asm volatile("bset %2,(%1) # set_bit reg" \ - : "=m"(*_a) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ -}) - -#define set_bit(nr, addr) __set_bit((nr), (addr)) - -/* - * clear bit - */ -#define ___clear_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - _a += (nr) >> 3; \ - \ - asm volatile("bclr %2,(%1) # clear_bit reg" \ - : "=m"(*_a) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ -}) - -#define clear_bit(nr, addr) ___clear_bit((nr), (addr)) - - -static inline void __clear_bit(unsigned long nr, volatile void *addr) -{ - unsigned int *a = (unsigned int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a &= ~mask; -} - -/* - * test bit - */ -static inline int test_bit(unsigned long nr, const volatile void *addr) -{ - return 1UL & (((const volatile unsigned int *) addr)[nr >> 5] >> (nr & 31)); -} - -/* - * change bit - */ -static inline void __change_bit(unsigned long nr, volatile void *addr) -{ - int mask; - unsigned int *a = (unsigned int *) addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a ^= mask; -} - -extern void change_bit(unsigned long nr, volatile void *addr); - -/* - * test and set bit - */ -#define __test_and_set_bit(nr,addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - unsigned epsw; \ - _a += (nr) >> 3; \ - \ - asm volatile("bset %3,(%2) # test_set_bit reg\n" \ - "mov epsw,%1" \ - : "=m"(*_a), "=d"(epsw) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ - \ - !(epsw & EPSW_FLAG_Z); \ -}) - -#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr)) - -/* - * test and clear bit - */ -#define __test_and_clear_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - unsigned epsw; \ - _a += (nr) >> 3; \ - \ - asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \ - "mov epsw,%1" \ - : "=m"(*_a), "=d"(epsw) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ - \ - !(epsw & EPSW_FLAG_Z); \ -}) - -#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr)) - -/* - * test and change bit - */ -static inline int __test_and_change_bit(unsigned long nr, volatile void *addr) -{ - int mask, retval; - unsigned int *a = (unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a ^= mask; - - return retval; -} - -extern int test_and_change_bit(unsigned long nr, volatile void *addr); - -#include - -#ifdef __KERNEL__ - -/** - * __ffs - find first bit set - * @x: the word to search - * - * - return 31..0 to indicate bit 31..0 most least significant bit set - * - if no bits are set in x, the result is undefined - */ -static inline __attribute__((const)) -unsigned long __ffs(unsigned long x) -{ - int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x) : "cc"); - return bit; -} - -/* - * special slimline version of fls() for calculating ilog2_u32() - * - note: no protection against n == 0 - */ -static inline __attribute__((const)) -int __ilog2_u32(u32 n) -{ - int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n) : "cc"); - return bit; -} - -/** - * fls - find last bit set - * @x: the word to search - * - * This is defined the same way as ffs: - * - return 32..1 to indicate bit 31..0 most significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int fls(int x) -{ - return (x != 0) ? __ilog2_u32(x) + 1 : 0; -} - -/** - * __fls - find last (most-significant) set bit in a long word - * @word: the word to search - * - * Undefined if no set bit exists, so code should check against 0 first. - */ -static inline unsigned long __fls(unsigned long word) -{ - return __ilog2_u32(word); -} - -/** - * ffs - find first bit set - * @x: the word to search - * - * - return 32..1 to indicate bit 31..0 most least significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int ffs(int x) -{ - /* Note: (x & -x) gives us a mask that is the least significant - * (rightmost) 1-bit of the value in x. - */ - return fls(x & -x); -} - -#include -#include -#include -#include -#include -#include -#include - -#endif /* __KERNEL__ */ -#endif /* __ASM_BITOPS_H */ diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h deleted file mode 100644 index 811414fb002d..000000000000 --- a/arch/mn10300/include/asm/bug.h +++ /dev/null @@ -1,37 +0,0 @@ -/* MN10300 Kernel bug reporting - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_BUG_H -#define _ASM_BUG_H - -#ifdef CONFIG_BUG - -/* - * Tell the user there is some problem. - */ -#define BUG() \ -do { \ - asm volatile( \ - " syscall 15 \n" \ - "0: \n" \ - " .section __bug_table,\"aw\" \n" \ - " .long 0b,%0,%1 \n" \ - " .previous \n" \ - : \ - : "i"(__FILE__), "i"(__LINE__) \ - ); \ -} while (1) - -#define HAVE_ARCH_BUG -#endif /* CONFIG_BUG */ - -#include - -#endif /* _ASM_BUG_H */ diff --git a/arch/mn10300/include/asm/bugs.h b/arch/mn10300/include/asm/bugs.h deleted file mode 100644 index 31c8bc592b47..000000000000 --- a/arch/mn10300/include/asm/bugs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Checks for architecture-dependent bugs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_BUGS_H -#define _ASM_BUGS_H - -#include - -static inline void __init check_bugs(void) -{ -} - -#endif /* _ASM_BUGS_H */ diff --git a/arch/mn10300/include/asm/busctl-regs.h b/arch/mn10300/include/asm/busctl-regs.h deleted file mode 100644 index 1632aef73401..000000000000 --- a/arch/mn10300/include/asm/busctl-regs.h +++ /dev/null @@ -1,151 +0,0 @@ -/* AM33v2 on-board bus controller registers - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_BUSCTL_REGS_H -#define _ASM_BUSCTL_REGS_H - -#include - -#ifdef __KERNEL__ - -/* bus controller registers */ -#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */ -#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */ -#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */ -#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */ -#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */ -#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */ -#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */ -#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */ -#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */ -#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */ -#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */ -#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */ -#define BCCR_API 0x00070000 /* bus arbitration priority */ -#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */ -#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */ -#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */ -#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */ -#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */ -#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */ -#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */ -#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */ -#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */ -#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */ -#define BCCR_TMON 0x03000000 /* timeout value settings */ -#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */ -#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */ -#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */ -#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */ -#define BCCR_TMOE 0x10000000 /* timeout detection enable */ - -#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */ -#define BCBERR_BESB 0x0000001f /* erroneous access destination space */ -#define BCBERR_BESB_MON 0x00000001 /* - monitor space */ -#define BCBERR_BESB_IO 0x00000002 /* - IO bus */ -#define BCBERR_BESB_EX 0x00000004 /* - EX bus */ -#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */ -#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */ -#define BCBERR_BERW 0x00000100 /* type of access */ -#define BCBERR_BERW_WRITE 0x00000000 /* - write */ -#define BCBERR_BERW_READ 0x00000100 /* - read */ -#define BCBERR_BESD 0x00000200 /* error detector */ -#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */ -#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */ -#define BCBERR_BEBST 0x00000400 /* type of access */ -#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */ -#define BCBERR_BEBST_BURST 0x00000400 /* - burst */ -#define BCBERR_BEME 0x00000800 /* multiple bus error flag */ -#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */ -#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */ -#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */ -#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */ -#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */ - -#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */ - -/* system bus controller registers */ -#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */ -#define SBBASE_BE 0x00000001 /* bank enable */ -#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */ -#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */ - -#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */ -#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */ -#define SBCNTRL0_REH 0x0000f000 /* read enable hold */ -#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */ -#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */ -#define SBCNTRL0_DAH 0x0f000000 /* data hold */ -#define SBCNTRL0_ADH 0xf0000000 /* address hold */ - -#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */ -#define SBCNTRL1_WED 0x00000f00 /* write enable delay */ -#define SBCNTRL1_RED 0x0000f000 /* read enable delay */ -#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */ -#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */ -#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */ -#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */ - -#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */ -#define SBCNTRL2_WC 0x000000ff /* wait count */ -#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */ -#define SBCNTRL2_WM 0x01000000 /* wait mode setting */ -#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */ -#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */ -#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */ -#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */ -#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */ -#define SBCNTRL2_BW 0x04000000 /* bus width */ -#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */ -#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */ -#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */ -#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */ -#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */ -#define SBCNTRL2_BT 0x70000000 /* bus type setting */ -#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */ -#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */ -#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */ -#define SBCNTRL2_BTSE 0x80000000 /* burst enable */ - -/* memory bus controller */ -#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */ -#define SDBASE_CE 0x00000001 /* chip enable */ -#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */ -#define SDBASE_CBAM_SHIFT 16 -#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */ - -#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */ -#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */ -#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */ -#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */ -#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */ -#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */ -#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */ -#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */ -#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */ -#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */ -#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */ -#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */ -#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */ -#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */ -#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */ -#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */ -#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */ -#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */ - -#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */ -#define SDREFCNT_PERI 0x00000fff /* refresh period */ - -#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h deleted file mode 100644 index f29cde2cfc91..000000000000 --- a/arch/mn10300/include/asm/cache.h +++ /dev/null @@ -1,60 +0,0 @@ -/* MN10300 cache management registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_CACHE_H -#define _ASM_CACHE_H - -#include -#include - -#ifndef __ASSEMBLY__ -#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES) -#else -#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES -#endif - -#define ARCH_DMA_MINALIGN L1_CACHE_BYTES - -/* data cache purge registers - * - read from the register to unconditionally purge that cache line - * - write address & 0xffffff00 to conditionally purge that cache line - * - clear LSB to request invalidation as well - */ -#define DCACHE_PURGE(WAY, ENTRY) \ - __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \ - (ENTRY) * L1_CACHE_BYTES, u32) - -#define DCACHE_PURGE_WAY0(ENTRY) \ - __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY1(ENTRY) \ - __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY2(ENTRY) \ - __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY3(ENTRY) \ - __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) - -/* instruction cache access registers */ -#define ICACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + \ - (ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32) -#define ICACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + \ - (ENTRY) * L1_CACHE_BYTES, u32) - -/* data cache access registers */ -#define DCACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + \ - (ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32) -#define DCACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + \ - (ENTRY) * L1_CACHE_BYTES, u32) - -#endif /* _ASM_CACHE_H */ diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h deleted file mode 100644 index 6d6df839948f..000000000000 --- a/arch/mn10300/include/asm/cacheflush.h +++ /dev/null @@ -1,164 +0,0 @@ -/* MN10300 Cache flushing - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CACHEFLUSH_H -#define _ASM_CACHEFLUSH_H - -#ifndef __ASSEMBLY__ - -/* Keep includes the same across arches. */ -#include - -/* - * Primitive routines - */ -#ifdef CONFIG_MN10300_CACHE_ENABLED -extern void mn10300_local_icache_inv(void); -extern void mn10300_local_icache_inv_page(unsigned long start); -extern void mn10300_local_icache_inv_range(unsigned long start, unsigned long end); -extern void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size); -extern void mn10300_local_dcache_inv(void); -extern void mn10300_local_dcache_inv_page(unsigned long start); -extern void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end); -extern void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size); -extern void mn10300_icache_inv(void); -extern void mn10300_icache_inv_page(unsigned long start); -extern void mn10300_icache_inv_range(unsigned long start, unsigned long end); -extern void mn10300_icache_inv_range2(unsigned long start, unsigned long size); -extern void mn10300_dcache_inv(void); -extern void mn10300_dcache_inv_page(unsigned long start); -extern void mn10300_dcache_inv_range(unsigned long start, unsigned long end); -extern void mn10300_dcache_inv_range2(unsigned long start, unsigned long size); -#ifdef CONFIG_MN10300_CACHE_WBACK -extern void mn10300_local_dcache_flush(void); -extern void mn10300_local_dcache_flush_page(unsigned long start); -extern void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end); -extern void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size); -extern void mn10300_local_dcache_flush_inv(void); -extern void mn10300_local_dcache_flush_inv_page(unsigned long start); -extern void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end); -extern void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size); -extern void mn10300_dcache_flush(void); -extern void mn10300_dcache_flush_page(unsigned long start); -extern void mn10300_dcache_flush_range(unsigned long start, unsigned long end); -extern void mn10300_dcache_flush_range2(unsigned long start, unsigned long size); -extern void mn10300_dcache_flush_inv(void); -extern void mn10300_dcache_flush_inv_page(unsigned long start); -extern void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end); -extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size); -#else -#define mn10300_local_dcache_flush() do {} while (0) -#define mn10300_local_dcache_flush_page(start) do {} while (0) -#define mn10300_local_dcache_flush_range(start, end) do {} while (0) -#define mn10300_local_dcache_flush_range2(start, size) do {} while (0) -#define mn10300_local_dcache_flush_inv() \ - mn10300_local_dcache_inv() -#define mn10300_local_dcache_flush_inv_page(start) \ - mn10300_local_dcache_inv_page(start) -#define mn10300_local_dcache_flush_inv_range(start, end) \ - mn10300_local_dcache_inv_range(start, end) -#define mn10300_local_dcache_flush_inv_range2(start, size) \ - mn10300_local_dcache_inv_range2(start, size) -#define mn10300_dcache_flush() do {} while (0) -#define mn10300_dcache_flush_page(start) do {} while (0) -#define mn10300_dcache_flush_range(start, end) do {} while (0) -#define mn10300_dcache_flush_range2(start, size) do {} while (0) -#define mn10300_dcache_flush_inv() mn10300_dcache_inv() -#define mn10300_dcache_flush_inv_page(start) \ - mn10300_dcache_inv_page((start)) -#define mn10300_dcache_flush_inv_range(start, end) \ - mn10300_dcache_inv_range((start), (end)) -#define mn10300_dcache_flush_inv_range2(start, size) \ - mn10300_dcache_inv_range2((start), (size)) -#endif /* CONFIG_MN10300_CACHE_WBACK */ -#else -#define mn10300_local_icache_inv() do {} while (0) -#define mn10300_local_icache_inv_page(start) do {} while (0) -#define mn10300_local_icache_inv_range(start, end) do {} while (0) -#define mn10300_local_icache_inv_range2(start, size) do {} while (0) -#define mn10300_local_dcache_inv() do {} while (0) -#define mn10300_local_dcache_inv_page(start) do {} while (0) -#define mn10300_local_dcache_inv_range(start, end) do {} while (0) -#define mn10300_local_dcache_inv_range2(start, size) do {} while (0) -#define mn10300_local_dcache_flush() do {} while (0) -#define mn10300_local_dcache_flush_inv_page(start) do {} while (0) -#define mn10300_local_dcache_flush_inv() do {} while (0) -#define mn10300_local_dcache_flush_inv_range(start, end)do {} while (0) -#define mn10300_local_dcache_flush_inv_range2(start, size) do {} while (0) -#define mn10300_local_dcache_flush_page(start) do {} while (0) -#define mn10300_local_dcache_flush_range(start, end) do {} while (0) -#define mn10300_local_dcache_flush_range2(start, size) do {} while (0) -#define mn10300_icache_inv() do {} while (0) -#define mn10300_icache_inv_page(start) do {} while (0) -#define mn10300_icache_inv_range(start, end) do {} while (0) -#define mn10300_icache_inv_range2(start, size) do {} while (0) -#define mn10300_dcache_inv() do {} while (0) -#define mn10300_dcache_inv_page(start) do {} while (0) -#define mn10300_dcache_inv_range(start, end) do {} while (0) -#define mn10300_dcache_inv_range2(start, size) do {} while (0) -#define mn10300_dcache_flush() do {} while (0) -#define mn10300_dcache_flush_inv_page(start) do {} while (0) -#define mn10300_dcache_flush_inv() do {} while (0) -#define mn10300_dcache_flush_inv_range(start, end) do {} while (0) -#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0) -#define mn10300_dcache_flush_page(start) do {} while (0) -#define mn10300_dcache_flush_range(start, end) do {} while (0) -#define mn10300_dcache_flush_range2(start, size) do {} while (0) -#endif /* CONFIG_MN10300_CACHE_ENABLED */ - -/* - * Virtually-indexed cache management (our cache is physically indexed) - */ -#define flush_cache_all() do {} while (0) -#define flush_cache_mm(mm) do {} while (0) -#define flush_cache_dup_mm(mm) do {} while (0) -#define flush_cache_range(mm, start, end) do {} while (0) -#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) -#define flush_cache_vmap(start, end) do {} while (0) -#define flush_cache_vunmap(start, end) do {} while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do {} while (0) -#define flush_dcache_mmap_lock(mapping) do {} while (0) -#define flush_dcache_mmap_unlock(mapping) do {} while (0) - -/* - * Physically-indexed cache management - */ -#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) -extern void flush_icache_page(struct vm_area_struct *vma, struct page *page); -extern void flush_icache_range(unsigned long start, unsigned long end); -#elif defined(CONFIG_MN10300_CACHE_INV_ICACHE) -static inline void flush_icache_page(struct vm_area_struct *vma, - struct page *page) -{ - mn10300_icache_inv_page(page_to_phys(page)); -} -extern void flush_icache_range(unsigned long start, unsigned long end); -#else -#define flush_icache_range(start, end) do {} while (0) -#define flush_icache_page(vma, pg) do {} while (0) -#endif - - -#define flush_icache_user_range(vma, pg, adr, len) \ - flush_icache_range(adr, adr + len) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_icache_page(vma, page); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/mn10300/include/asm/checksum.h b/arch/mn10300/include/asm/checksum.h deleted file mode 100644 index c80df5b504ac..000000000000 --- a/arch/mn10300/include/asm/checksum.h +++ /dev/null @@ -1,79 +0,0 @@ -/* MN10300 Optimised checksumming code - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CHECKSUM_H -#define _ASM_CHECKSUM_H - -extern __wsum csum_partial(const void *buff, int len, __wsum sum); -extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); -extern __wsum csum_partial_copy_from_user(const void *src, void *dst, - int len, __wsum sum, - int *err_ptr); -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); -extern __wsum csum_partial(const void *buff, int len, __wsum sum); -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define csum_partial_copy_fromuser csum_partial_copy -extern __wsum csum_partial_copy(const void *src, void *dst, int len, - __wsum sum); - -static inline __sum16 csum_fold(__wsum sum) -{ - asm( - " add %1,%0 \n" - " addc 0xffff,%0 \n" - : "=r" (sum) - : "r" (sum << 16), "0" (sum & 0xffff0000) - : "cc" - ); - return (~sum) >> 16; -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - __u32 len, __u8 proto, - __wsum sum) -{ - __wsum tmp = (__wsum)((len + proto) << 8); - - asm( - " add %1,%0 \n" - " addc %2,%0 \n" - " addc %3,%0 \n" - " addc 0,%0 \n" - : "=r" (sum) - : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum) - : "cc" - ); - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - __u32 len, __u8 proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -#undef _HAVE_ARCH_IPV6_CSUM - -/* - * Copy and checksum to user - */ -#define HAVE_CSUM_COPY_USER -extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len, - __wsum sum, int *err_ptr); - - -#endif /* _ASM_CHECKSUM_H */ diff --git a/arch/mn10300/include/asm/cmpxchg.h b/arch/mn10300/include/asm/cmpxchg.h deleted file mode 100644 index 97a4aaf387a6..000000000000 --- a/arch/mn10300/include/asm/cmpxchg.h +++ /dev/null @@ -1,115 +0,0 @@ -/* MN10300 Atomic xchg/cmpxchg operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CMPXCHG_H -#define _ASM_CMPXCHG_H - -#include - -#ifdef CONFIG_SMP -#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT -static inline -unsigned long __xchg(volatile unsigned long *m, unsigned long val) -{ - unsigned long status; - unsigned long oldval; - - asm volatile( - "1: mov %4,(_AAR,%3) \n" - " mov (_ADR,%3),%1 \n" - " mov %5,(_ADR,%3) \n" - " mov (_ADR,%3),%0 \n" /* flush */ - " mov (_ASR,%3),%0 \n" - " or %0,%0 \n" - " bne 1b \n" - : "=&r"(status), "=&r"(oldval), "=m"(*m) - : "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), "r"(val) - : "memory", "cc"); - - return oldval; -} - -static inline unsigned long __cmpxchg(volatile unsigned long *m, - unsigned long old, unsigned long new) -{ - unsigned long status; - unsigned long oldval; - - asm volatile( - "1: mov %4,(_AAR,%3) \n" - " mov (_ADR,%3),%1 \n" - " cmp %5,%1 \n" - " bne 2f \n" - " mov %6,(_ADR,%3) \n" - "2: mov (_ADR,%3),%0 \n" /* flush */ - " mov (_ASR,%3),%0 \n" - " or %0,%0 \n" - " bne 1b \n" - : "=&r"(status), "=&r"(oldval), "=m"(*m) - : "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), - "r"(old), "r"(new) - : "memory", "cc"); - - return oldval; -} -#else /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ -#error "No SMP atomic operation support!" -#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ - -#else /* CONFIG_SMP */ - -/* - * Emulate xchg for non-SMP MN10300 - */ -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -static inline -unsigned long __xchg(volatile unsigned long *m, unsigned long val) -{ - unsigned long oldval; - unsigned long flags; - - flags = arch_local_cli_save(); - oldval = *m; - *m = val; - arch_local_irq_restore(flags); - return oldval; -} - -/* - * Emulate cmpxchg for non-SMP MN10300 - */ -static inline unsigned long __cmpxchg(volatile unsigned long *m, - unsigned long old, unsigned long new) -{ - unsigned long oldval; - unsigned long flags; - - flags = arch_local_cli_save(); - oldval = *m; - if (oldval == old) - *m = new; - arch_local_irq_restore(flags); - return oldval; -} - -#endif /* CONFIG_SMP */ - -#define xchg(ptr, v) \ - ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ - (unsigned long)(v))) - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ - (unsigned long)(o), \ - (unsigned long)(n))) - -#endif /* _ASM_CMPXCHG_H */ diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h deleted file mode 100644 index c54effae2202..000000000000 --- a/arch/mn10300/include/asm/cpu-regs.h +++ /dev/null @@ -1,353 +0,0 @@ -/* MN10300 Core system registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CPU_REGS_H -#define _ASM_CPU_REGS_H - -#ifndef __ASSEMBLY__ -#include -#endif - -/* we tell the compiler to pretend to be AM33 so that it doesn't try and use - * the FP regs, but tell the assembler that we're actually allowed AM33v2 - * instructions */ -#ifndef __ASSEMBLY__ -asm(" .am33_2\n"); -#else -.am33_2 -#endif - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR)) -#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR)) -#else -#define __SYSREG(ADDR, TYPE) ADDR -#define __SYSREGC(ADDR, TYPE) ADDR -#endif - -/* CPU registers */ -#define EPSW_FLAG_Z 0x00000001 /* zero flag */ -#define EPSW_FLAG_N 0x00000002 /* negative flag */ -#define EPSW_FLAG_C 0x00000004 /* carry flag */ -#define EPSW_FLAG_V 0x00000008 /* overflow flag */ -#define EPSW_IM 0x00000700 /* interrupt mode */ -#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */ -#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */ -#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */ -#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */ -#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */ -#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */ -#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */ -#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */ -#define EPSW_IE 0x00000800 /* interrupt enable */ -#define EPSW_S 0x00003000 /* software auxiliary bits */ -#define EPSW_T 0x00008000 /* trace enable */ -#define EPSW_nSL 0x00010000 /* not supervisor level */ -#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */ -#define EPSW_nAR 0x00040000 /* register bank control */ -#define EPSW_ML 0x00080000 /* monitor level */ -#define EPSW_FE 0x00100000 /* FPU enable */ -#define EPSW_IM_SHIFT 8 /* EPSW_IM_SHIFT determines the interrupt mode */ - -#define NUM2EPSW_IM(num) ((num) << EPSW_IM_SHIFT) - -/* FPU registers */ -#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ -#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */ -#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */ -#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */ -#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */ -#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */ -#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */ -#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */ -#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */ -#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */ -#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */ -#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */ -#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */ -#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */ -#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */ -#define FPCR_RM 0x00030000 /* rounding mode */ -#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */ -#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */ -#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */ -#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */ -#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */ -#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */ - -/* CPU control registers */ -#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */ -#define CPUP_DWBD 0x0020 /* write buffer disable flag */ -#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */ -#define CPUP_EXM 0x0080 /* exception operation mode */ -#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */ -#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */ - -#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */ -#define CPUM_SLEEP 0x0004 /* set to enter sleep state */ -#define CPUM_HALT 0x0008 /* set to enter halt state */ -#define CPUM_STOP 0x0010 /* set to enter stop state */ - -#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ -#define CPUREV_TYPE 0x0000000f /* CPU type */ -#define CPUREV_TYPE_S 0 -#define CPUREV_TYPE_AM33_1 0x00000000 /* - AM33-1 core, AM33/1.00 arch */ -#define CPUREV_TYPE_AM33_2 0x00000001 /* - AM33-2 core, AM33/2.00 arch */ -#define CPUREV_TYPE_AM34_1 0x00000002 /* - AM34-1 core, AM33/2.00 arch */ -#define CPUREV_TYPE_AM33_3 0x00000003 /* - AM33-3 core, AM33/2.00 arch */ -#define CPUREV_TYPE_AM34_2 0x00000004 /* - AM34-2 core, AM33/3.00 arch */ -#define CPUREV_REVISION 0x000000f0 /* CPU revision */ -#define CPUREV_REVISION_S 4 -#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ -#define CPUREV_ICWAY_S 8 -#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */ -#define CPUREV_ICSIZE_S 12 -#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */ -#define CPUREV_DCWAY_S 16 -#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */ -#define CPUREV_DCSIZE_S 20 -#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */ -#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */ -#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */ - -#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */ - -/* interrupt/exception control registers */ -#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */ -#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */ -#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */ -#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */ -#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */ -#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */ -#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */ - -#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */ -#define TBR_TB 0xff000000 /* table base address bits 31-24 */ -#define TBR_INT_CODE 0x00ffffff /* interrupt code */ - -#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */ - -#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */ -#define sISR_IRQICE 0x00000001 /* ICE interrupt */ -#define sISR_ISTEP 0x00000002 /* single step interrupt */ -#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */ -#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */ -#define sISR_PIEXE 0x00000010 /* program interrupt */ -#define sISR_MEMERR 0x00000020 /* illegal memory access fault */ -#define sISR_IBREAK 0x00000040 /* instraction break interrupt */ -#define sISR_DBSRL 0x00000080 /* debug serial interrupt */ -#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */ -#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */ -#define sISR_OBREAK 0x00000400 /* operand break interrupt */ -#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */ -#define sISR_BUSERR 0x00001000 /* bus error fault */ -#define sISR_DBLFT 0x00002000 /* double fault */ -#define sISR_DBG 0x00008000 /* debug reserved interrupt */ -#define sISR_ITMISS 0x00010000 /* instruction TLB miss */ -#define sISR_DTMISS 0x00020000 /* data TLB miss */ -#define sISR_ITEX 0x00040000 /* instruction TLB access exception */ -#define sISR_DTEX 0x00080000 /* data TLB access exception */ -#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */ -#define sISR_ILGDA 0x00200000 /* illegal data access exception */ -#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */ -#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */ -#define sISR_PRIDA 0x01000000 /* privileged space data access excep */ -#define sISR_DISA 0x02000000 /* data space instruction access excep */ -#define sISR_SYSC 0x04000000 /* system call instruction excep */ -#define sISR_FPUD 0x08000000 /* FPU disabled excep */ -#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */ -#define sISR_FPUOP 0x20000000 /* FPU operation excep */ -#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */ - -/* cache control registers */ -#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */ -#define CHCTR_ICEN 0x0001 /* instruction cache enable */ -#define CHCTR_DCEN 0x0002 /* data cache enable */ -#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */ -#define CHCTR_DCBUSY 0x0008 /* data cache busy */ -#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */ -#define CHCTR_DCINV 0x0020 /* data cache invalidate */ -#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */ -#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */ -#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */ -#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */ -#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ -#define CHCTR_DCWMD 0xf000 /* data cache way mode */ - -#ifdef CONFIG_AM34_2 -#define ICIVCR __SYSREG(0xc0000c00, u32) /* icache area invalidate control */ -#define ICIVCR_ICIVBSY 0x00000008 /* icache area invalidate busy */ -#define ICIVCR_ICI 0x00000001 /* icache area invalidate */ - -#define ICIVMR __SYSREG(0xc0000c04, u32) /* icache area invalidate mask */ - -#define DCPGCR __SYSREG(0xc0000c10, u32) /* data cache area purge control */ -#define DCPGCR_DCPGBSY 0x00000008 /* data cache area purge busy */ -#define DCPGCR_DCP 0x00000002 /* data cache area purge */ -#define DCPGCR_DCI 0x00000001 /* data cache area invalidate */ - -#define DCPGMR __SYSREG(0xc0000c14, u32) /* data cache area purge mask */ -#endif /* CONFIG_AM34_2 */ - -/* MMU control registers */ -#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ -#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ -#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */ -#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */ -#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */ -#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */ -#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */ -#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */ -#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */ -#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */ -#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */ -#define MMUCTR_CE 0x00008000 /* cacheable bit enable */ -#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */ -#define MMUCTR_DTE 0x00400000 /* data TLB enable */ -#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */ -#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */ -#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */ -#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */ -#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */ -#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ -#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ -#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ -#ifdef CONFIG_AM34_2 -#define MMUCTR_WTE 0x80000000 /* write-through cache TLB entry bit enable */ -#endif - -#define PIDR __SYSREG(0xc0000094, u16) /* PID register */ -#define PIDR_PID 0x00ff /* process identifier */ - -#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */ - -#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */ -#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */ -#define xPTEL_V 0x00000001 /* TLB entry valid */ -#define xPTEL_UNUSED1 0x00000002 /* unused bit */ -#define xPTEL_UNUSED2 0x00000004 /* unused bit */ -#define xPTEL_C 0x00000008 /* cached if set */ -#define xPTEL_PV 0x00000010 /* page valid */ -#define xPTEL_D 0x00000020 /* dirty */ -#define xPTEL_PR 0x000001c0 /* page protection */ -#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */ -#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */ -#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */ -#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */ -#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */ -#define xPTEL_G 0x00000200 /* global (use PID if 0) */ -#define xPTEL_PS 0x00000c00 /* page size */ -#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */ -#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */ -#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */ -#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ -#define xPTEL_PPN 0xfffff006 /* physical page number */ - -#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ -#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ -#define xPTEU_VPN 0xfffffc00 /* virtual page number */ -#define xPTEU_PID 0x000000ff /* process identifier to which applicable */ - -#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */ -#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */ -#define xPTEL2_V 0x00000001 /* TLB entry valid */ -#define xPTEL2_C 0x00000002 /* cacheable */ -#define xPTEL2_PV 0x00000004 /* page valid */ -#define xPTEL2_D 0x00000008 /* dirty */ -#define xPTEL2_PR 0x00000070 /* page protection */ -#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */ -#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */ -#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */ -#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */ -#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */ -#define xPTEL2_G 0x00000080 /* global (use PID if 0) */ -#define xPTEL2_PS 0x00000300 /* page size */ -#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */ -#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ -#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ -#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ -#define xPTEL2_CWT 0x00000400 /* cacheable write-through */ -#define xPTEL2_UNUSED1 0x00000800 /* unused bit (broadcast mask) */ -#define xPTEL2_PPN 0xfffff000 /* physical page number */ - -#define xPTEL2_V_BIT 0 /* bit numbers corresponding to above masks */ -#define xPTEL2_C_BIT 1 -#define xPTEL2_PV_BIT 2 -#define xPTEL2_D_BIT 3 -#define xPTEL2_G_BIT 7 -#define xPTEL2_UNUSED1_BIT 11 - -#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ -#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ -#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */ -#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */ -#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */ -#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */ -#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */ -#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */ -#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */ -#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */ -#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */ -#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */ -#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */ -#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */ -#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */ -#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */ -#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */ -#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */ -#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ -#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ - -#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT -/* atomic operation registers */ -#define AAR __SYSREG(0xc0000a00, u32) /* cacheable address */ -#define AAR2 __SYSREG(0xc0000a04, u32) /* uncacheable address */ -#define ADR __SYSREG(0xc0000a08, u32) /* data */ -#define ASR __SYSREG(0xc0000a0c, u32) /* status */ -#define AARU __SYSREG(0xd400aa00, u32) /* user address */ -#define ADRU __SYSREG(0xd400aa08, u32) /* user data */ -#define ASRU __SYSREG(0xd400aa0c, u32) /* user status */ - -#define ASR_RW 0x00000008 /* read */ -#define ASR_BW 0x00000004 /* bus error */ -#define ASR_IW 0x00000002 /* interrupt */ -#define ASR_LW 0x00000001 /* bus lock */ - -#define ASRU_RW ASR_RW /* read */ -#define ASRU_BW ASR_BW /* bus error */ -#define ASRU_IW ASR_IW /* interrupt */ -#define ASRU_LW ASR_LW /* bus lock */ - -/* in inline ASM, we stick the base pointer in to a reg and use offsets from - * it */ -#define ATOMIC_OPS_BASE_ADDR 0xc0000a00 -#ifndef __ASSEMBLY__ -asm( - "_AAR = 0\n" - "_AAR2 = 4\n" - "_ADR = 8\n" - "_ASR = 12\n"); -#else -#define _AAR 0 -#define _AAR2 4 -#define _ADR 8 -#define _ASR 12 -#endif - -/* physical page address for userspace atomic operations registers */ -#define USER_ATOMIC_OPS_PAGE_ADDR 0xd400a000 - -#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_CPU_REGS_H */ diff --git a/arch/mn10300/include/asm/current.h b/arch/mn10300/include/asm/current.h deleted file mode 100644 index ca6027d83743..000000000000 --- a/arch/mn10300/include/asm/current.h +++ /dev/null @@ -1,37 +0,0 @@ -/* MN10300 Current task structure accessor - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CURRENT_H -#define _ASM_CURRENT_H - -#include - -/* - * dedicate E2 to keeping the current task pointer - */ -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - -register struct task_struct *const current asm("e2") __attribute__((used)); - -#define get_current() current - -extern struct task_struct *__current; - -#else -static inline __attribute__((const)) -struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() -#endif - -#endif /* _ASM_CURRENT_H */ diff --git a/arch/mn10300/include/asm/debugger.h b/arch/mn10300/include/asm/debugger.h deleted file mode 100644 index e1d3b083696c..000000000000 --- a/arch/mn10300/include/asm/debugger.h +++ /dev/null @@ -1,43 +0,0 @@ -/* Kernel debugger for MN10300 - * - * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_DEBUGGER_H -#define _ASM_DEBUGGER_H - -#if defined(CONFIG_KERNEL_DEBUGGER) - -extern int debugger_intercept(enum exception_code, int, int, struct pt_regs *); -extern int at_debugger_breakpoint(struct pt_regs *); - -#ifndef CONFIG_MN10300_DEBUGGER_CACHE_NO_FLUSH -extern void debugger_local_cache_flushinv(void); -extern void debugger_local_cache_flushinv_one(u8 *); -#else -static inline void debugger_local_cache_flushinv(void) {} -static inline void debugger_local_cache_flushinv_one(u8 *addr) {} -#endif - -#else /* CONFIG_KERNEL_DEBUGGER */ - -static inline int debugger_intercept(enum exception_code excep, - int signo, int si_code, - struct pt_regs *regs) -{ - return 0; -} - -static inline int at_debugger_breakpoint(struct pt_regs *regs) -{ - return 0; -} - -#endif /* CONFIG_KERNEL_DEBUGGER */ -#endif /* _ASM_DEBUGGER_H */ diff --git a/arch/mn10300/include/asm/delay.h b/arch/mn10300/include/asm/delay.h deleted file mode 100644 index 34517b359399..000000000000 --- a/arch/mn10300/include/asm/delay.h +++ /dev/null @@ -1,19 +0,0 @@ -/* MN10300 Uninterruptible delay routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DELAY_H -#define _ASM_DELAY_H - -extern void __udelay(unsigned long usecs); -extern void __delay(unsigned long loops); - -#define udelay(n) __udelay(n) - -#endif /* _ASM_DELAY_H */ diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h deleted file mode 100644 index 503efab2a516..000000000000 --- a/arch/mn10300/include/asm/div64.h +++ /dev/null @@ -1,115 +0,0 @@ -/* MN10300 64-bit division - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DIV64 -#define _ASM_DIV64 - -#include - -extern void ____unhandled_size_in_do_div___(void); - -/* - * Beginning with gcc 4.6, the MDR register is represented explicitly. We - * must, therefore, at least explicitly clobber the register when we make - * changes to it. The following assembly fragments *could* be rearranged in - * order to leave the moves to/from the MDR register to the compiler, but the - * gains would be minimal at best. - */ -#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6) -# define CLOBBER_MDR_CC "mdr", "cc" -#else -# define CLOBBER_MDR_CC "cc" -#endif - -/* - * divide n by base, leaving the result in n and returning the remainder - * - we can do this quite efficiently on the MN10300 by cascading the divides - * through the MDR register - */ -#define do_div(n, base) \ -({ \ - unsigned __rem = 0; \ - if (sizeof(n) <= 4) { \ - asm("mov %1,mdr \n" \ - "divu %2,%0 \n" \ - "mov mdr,%1 \n" \ - : "+r"(n), "=d"(__rem) \ - : "r"(base), "1"(__rem) \ - : CLOBBER_MDR_CC \ - ); \ - } else if (sizeof(n) <= 8) { \ - union { \ - unsigned long long l; \ - u32 w[2]; \ - } __quot; \ - __quot.l = n; \ - asm("mov %0,mdr \n" /* MDR = 0 */ \ - "divu %3,%1 \n" \ - /* __quot.MSL = __div.MSL / base, */ \ - /* MDR = MDR:__div.MSL % base */ \ - "divu %3,%2 \n" \ - /* __quot.LSL = MDR:__div.LSL / base, */ \ - /* MDR = MDR:__div.LSL % base */ \ - "mov mdr,%0 \n" \ - : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \ - : "r"(base), "0"(__rem), "1"(__quot.w[1]), \ - "2"(__quot.w[0]) \ - : CLOBBER_MDR_CC \ - ); \ - n = __quot.l; \ - } else { \ - ____unhandled_size_in_do_div___(); \ - } \ - __rem; \ -}) - -/* - * do an unsigned 32-bit multiply and divide with intermediate 64-bit product - * so as not to lose accuracy - * - we use the MDR register to hold the MSW of the product - */ -static inline __attribute__((const)) -unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div) -{ - unsigned result; - - asm("mulu %2,%0 \n" /* MDR:val = val*mult */ - "divu %3,%0 \n" /* val = MDR:val/div; - * MDR = MDR:val%div */ - : "=r"(result) - : "0"(val), "ir"(mult), "r"(div) - : CLOBBER_MDR_CC - ); - - return result; -} - -/* - * do a signed 32-bit multiply and divide with intermediate 64-bit product so - * as not to lose accuracy - * - we use the MDR register to hold the MSW of the product - */ -static inline __attribute__((const)) -signed __muldiv64s(signed val, signed mult, signed div) -{ - signed result; - - asm("mul %2,%0 \n" /* MDR:val = val*mult */ - "div %3,%0 \n" /* val = MDR:val/div; - * MDR = MDR:val%div */ - : "=r"(result) - : "0"(val), "ir"(mult), "r"(div) - : CLOBBER_MDR_CC - ); - - return result; -} - -#endif /* _ASM_DIV64 */ diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h deleted file mode 100644 index 439e474ed6d7..000000000000 --- a/arch/mn10300/include/asm/dma-mapping.h +++ /dev/null @@ -1,21 +0,0 @@ -/* DMA mapping routines for the MN10300 arch - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H - -extern const struct dma_map_ops mn10300_dma_ops; - -static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) -{ - return &mn10300_dma_ops; -} - -#endif diff --git a/arch/mn10300/include/asm/dma.h b/arch/mn10300/include/asm/dma.h deleted file mode 100644 index 10b77d4628c2..000000000000 --- a/arch/mn10300/include/asm/dma.h +++ /dev/null @@ -1,117 +0,0 @@ -/* MN10300 ISA DMA handlers and definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -#include -#include -#include - -#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */ -#define MAX_DMA_ADDRESS 0xbfffffff - -extern spinlock_t dma_spin_lock; - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static inline void enable_dma(unsigned int dmanr) -{ -} - -static inline void disable_dma(unsigned int dmanr) -{ -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static inline void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static inline void set_dma_mode(unsigned int dmanr, char mode) -{ -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static inline void set_dma_page(unsigned int dmanr, char pagenr) -{ -} - - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static inline void set_dma_addr(unsigned int dmanr, unsigned int a) -{ -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static inline void set_dma_count(unsigned int dmanr, unsigned int count) -{ -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static inline int get_dma_residue(unsigned int dmanr) -{ - return 0; -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char *device_id); -extern void free_dma(unsigned int dmanr); - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_DMA_H */ diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h deleted file mode 100644 index 80337b339c90..000000000000 --- a/arch/mn10300/include/asm/dmactl-regs.h +++ /dev/null @@ -1,16 +0,0 @@ -/* MN10300 on-board DMA controller registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMACTL_REGS_H -#define _ASM_DMACTL_REGS_H - -#include - -#endif /* _ASM_DMACTL_REGS_H */ diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h deleted file mode 100644 index f592d7a9f032..000000000000 --- a/arch/mn10300/include/asm/elf.h +++ /dev/null @@ -1,153 +0,0 @@ -/* MN10300 ELF constant and register definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_ELF_H -#define _ASM_ELF_H - -#include -#include -#include - -/* - * AM33 relocations - */ -#define R_MN10300_NONE 0 /* No reloc. */ -#define R_MN10300_32 1 /* Direct 32 bit. */ -#define R_MN10300_16 2 /* Direct 16 bit. */ -#define R_MN10300_8 3 /* Direct 8 bit. */ -#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */ -#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */ -#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ -#define R_MN10300_24 9 /* Direct 24 bit. */ -#define R_MN10300_RELATIVE 23 /* Adjust by program base. */ -#define R_MN10300_SYM_DIFF 33 /* Adjustment when relaxing. */ -#define R_MN10300_ALIGN 34 /* Alignment requirement. */ - -/* - * AM33/AM34 HW Capabilities - */ -#define HWCAP_MN10300_ATOMIC_OP_UNIT 1 /* Has AM34 Atomic Operations */ - - -/* - * ELF register definitions.. - */ -typedef unsigned long elf_greg_t; - -#define ELF_NGREG ((sizeof(struct pt_regs) / sizeof(elf_greg_t)) - 1) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -#define ELF_NFPREG 32 -typedef float elf_fpreg_t; - -typedef struct { - elf_fpreg_t fpregs[ELF_NFPREG]; - u_int32_t fpcr; -} elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture - */ -#define elf_check_arch(x) \ - (((x)->e_machine == EM_CYGNUS_MN10300) || \ - ((x)->e_machine == EM_MN10300)) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2LSB -#define ELF_ARCH EM_MN10300 - -/* - * ELF process initialiser - */ -#define ELF_PLAT_INIT(_r, load_addr) \ -do { \ - struct pt_regs *_ur = current->thread.uregs; \ - _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \ - _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \ - _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \ - _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \ - _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \ - _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \ -} while (0) - -#define CORE_DUMP_USE_REGSET -#define ELF_EXEC_PAGESIZE 4096 - -/* - * This is the location that an ET_DYN program is loaded if exec'ed. Typical - * use of this is to invoke "./ld.so someprog" to test out a new version of - * the loader. We need to make sure that it is out of the way of the program - * that it will "exec", and that there is sufficient room for the brk. - * - must clear the VMALLOC area - */ -#define ELF_ET_DYN_BASE 0x04000000 - -/* - * regs is struct pt_regs, pr_reg is elf_gregset_t (which is - * now struct user_regs, they are different) - * - ELF_CORE_COPY_REGS has been guessed, and may be wrong - */ -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ -do { \ - pr_reg[0] = regs->a3; \ - pr_reg[1] = regs->a2; \ - pr_reg[2] = regs->d3; \ - pr_reg[3] = regs->d2; \ - pr_reg[4] = regs->mcvf; \ - pr_reg[5] = regs->mcrl; \ - pr_reg[6] = regs->mcrh; \ - pr_reg[7] = regs->mdrq; \ - pr_reg[8] = regs->e1; \ - pr_reg[9] = regs->e0; \ - pr_reg[10] = regs->e7; \ - pr_reg[11] = regs->e6; \ - pr_reg[12] = regs->e5; \ - pr_reg[13] = regs->e4; \ - pr_reg[14] = regs->e3; \ - pr_reg[15] = regs->e2; \ - pr_reg[16] = regs->sp; \ - pr_reg[17] = regs->lar; \ - pr_reg[18] = regs->lir; \ - pr_reg[19] = regs->mdr; \ - pr_reg[20] = regs->a1; \ - pr_reg[21] = regs->a0; \ - pr_reg[22] = regs->d1; \ - pr_reg[23] = regs->d0; \ - pr_reg[24] = regs->orig_d0; \ - pr_reg[25] = regs->epsw; \ - pr_reg[26] = regs->pc; \ -} while (0); - -/* - * This yields a mask that user programs can use to figure out what - * instruction set this CPU supports. This could be done in user space, - * but it's not easy, and we've already done it here. - */ -#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT -#define ELF_HWCAP (HWCAP_MN10300_ATOMIC_OP_UNIT) -#else -#define ELF_HWCAP (0) -#endif - -/* - * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - * - * For the moment, we have only optimizations for the Intel generations, - * but that could change... - */ -#define ELF_PLATFORM (NULL) - -#endif /* _ASM_ELF_H */ diff --git a/arch/mn10300/include/asm/emergency-restart.h b/arch/mn10300/include/asm/emergency-restart.h deleted file mode 100644 index 3711bd9d50bd..000000000000 --- a/arch/mn10300/include/asm/emergency-restart.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h deleted file mode 100644 index 95a4d42c3a06..000000000000 --- a/arch/mn10300/include/asm/exceptions.h +++ /dev/null @@ -1,121 +0,0 @@ -/* MN10300 Microcontroller core exceptions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_EXCEPTIONS_H -#define _ASM_EXCEPTIONS_H - -#include - -/* - * define the breakpoint instruction opcode to use - * - note that the JTAG unit steals 0xFF, so you can't use JTAG and GDBSTUB at - * the same time. - */ -#define GDBSTUB_BKPT 0xFF - -#ifndef __ASSEMBLY__ - -/* - * enumeration of exception codes (as extracted from TBR MSW) - */ -enum exception_code { - EXCEP_RESET = 0x000000, /* reset */ - - /* MMU exceptions */ - EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */ - EXCEP_DTLBMISS = 0x000108, /* data TLB miss */ - EXCEP_IAERROR = 0x000110, /* instruction address */ - EXCEP_DAERROR = 0x000118, /* data address */ - - /* system exceptions */ - EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */ - EXCEP_ISTEP = 0x000130, /* single step */ - EXCEP_IBREAK = 0x000150, /* instruction breakpoint */ - EXCEP_OBREAK = 0x000158, /* operand breakpoint */ - EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */ - EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */ - EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */ - EXCEP_MEMERR = 0x000178, /* illegal memory access */ - EXCEP_MISALIGN = 0x000180, /* misalignment */ - EXCEP_BUSERROR = 0x000188, /* bus error */ - EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */ - EXCEP_ILLDATACC = 0x000198, /* illegal data access */ - EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */ - EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */ - EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */ - EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */ - EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */ - - /* FPU exceptions */ - EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */ - EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */ - EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */ - - /* interrupts */ - EXCEP_WDT = 0x000240, /* watchdog timer overflow */ - EXCEP_NMI = 0x000248, /* non-maskable interrupt */ - EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */ - EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */ - EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */ - EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */ - EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */ - EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */ - EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */ - - /* system calls */ - EXCEP_SYSCALL0 = 0x000300, /* system call 0 */ - EXCEP_SYSCALL1 = 0x000308, /* system call 1 */ - EXCEP_SYSCALL2 = 0x000310, /* system call 2 */ - EXCEP_SYSCALL3 = 0x000318, /* system call 3 */ - EXCEP_SYSCALL4 = 0x000320, /* system call 4 */ - EXCEP_SYSCALL5 = 0x000328, /* system call 5 */ - EXCEP_SYSCALL6 = 0x000330, /* system call 6 */ - EXCEP_SYSCALL7 = 0x000338, /* system call 7 */ - EXCEP_SYSCALL8 = 0x000340, /* system call 8 */ - EXCEP_SYSCALL9 = 0x000348, /* system call 9 */ - EXCEP_SYSCALL10 = 0x000350, /* system call 10 */ - EXCEP_SYSCALL11 = 0x000358, /* system call 11 */ - EXCEP_SYSCALL12 = 0x000360, /* system call 12 */ - EXCEP_SYSCALL13 = 0x000368, /* system call 13 */ - EXCEP_SYSCALL14 = 0x000370, /* system call 14 */ - EXCEP_SYSCALL15 = 0x000378, /* system call 15 */ -}; - -extern void __set_intr_stub(enum exception_code code, void *handler); -extern void set_intr_stub(enum exception_code code, void *handler); - -struct pt_regs; - -extern asmlinkage void __common_exception(void); -extern asmlinkage void itlb_miss(void); -extern asmlinkage void dtlb_miss(void); -extern asmlinkage void itlb_aerror(void); -extern asmlinkage void dtlb_aerror(void); -extern asmlinkage void raw_bus_error(void); -extern asmlinkage void double_fault(void); -extern asmlinkage int system_call(struct pt_regs *); -extern asmlinkage void nmi(struct pt_regs *, enum exception_code); -extern asmlinkage void uninitialised_exception(struct pt_regs *, - enum exception_code); -extern asmlinkage void irq_handler(void); -extern asmlinkage void profile_handler(void); -extern asmlinkage void nmi_handler(void); -extern asmlinkage void misalignment(struct pt_regs *, enum exception_code); - -extern void die(const char *, struct pt_regs *, enum exception_code) - __noreturn; - -extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); - -#define NUM2EXCEP_IRQ_LEVEL(num) (EXCEP_IRQ_LEVEL0 + (num) * 8) - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_EXCEPTIONS_H */ diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h deleted file mode 100644 index a47e995d45f3..000000000000 --- a/arch/mn10300/include/asm/fpu.h +++ /dev/null @@ -1,132 +0,0 @@ -/* MN10300 FPU definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_FPU_H -#define _ASM_FPU_H - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -#ifdef __KERNEL__ - -extern asmlinkage void fpu_disabled(void); - -#ifdef CONFIG_FPU - -#ifdef CONFIG_LAZY_SAVE_FPU -/* the task that currently owns the FPU state */ -extern struct task_struct *fpu_state_owner; -#endif - -#if (THREAD_USING_FPU & ~0xff) -#error THREAD_USING_FPU must be smaller than 0x100. -#endif - -static inline void set_using_fpu(struct task_struct *tsk) -{ - asm volatile( - "bset %0,(0,%1)" - : - : "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags) - : "memory", "cc"); -} - -static inline void clear_using_fpu(struct task_struct *tsk) -{ - asm volatile( - "bclr %0,(0,%1)" - : - : "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags) - : "memory", "cc"); -} - -#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) - -extern asmlinkage void fpu_kill_state(struct task_struct *); -extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); -extern asmlinkage void fpu_init_state(void); -extern asmlinkage void fpu_save(struct fpu_state_struct *); -extern int fpu_setup_sigcontext(struct fpucontext *buf); -extern int fpu_restore_sigcontext(struct fpucontext *buf); - -static inline void unlazy_fpu(struct task_struct *tsk) -{ - preempt_disable(); -#ifndef CONFIG_LAZY_SAVE_FPU - if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { - fpu_save(&tsk->thread.fpu_state); - tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; - tsk->thread.uregs->epsw &= ~EPSW_FE; - } -#else - if (fpu_state_owner == tsk) - fpu_save(&tsk->thread.fpu_state); -#endif - preempt_enable(); -} - -static inline void exit_fpu(struct task_struct *tsk) -{ -#ifdef CONFIG_LAZY_SAVE_FPU - preempt_disable(); - if (fpu_state_owner == tsk) - fpu_state_owner = NULL; - preempt_enable(); -#endif -} - -static inline void flush_fpu(void) -{ - struct task_struct *tsk = current; - - preempt_disable(); -#ifndef CONFIG_LAZY_SAVE_FPU - if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { - tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; - tsk->thread.uregs->epsw &= ~EPSW_FE; - } -#else - if (fpu_state_owner == tsk) { - fpu_state_owner = NULL; - tsk->thread.uregs->epsw &= ~EPSW_FE; - } -#endif - preempt_enable(); - clear_using_fpu(tsk); -} - -#else /* CONFIG_FPU */ - -extern asmlinkage -void unexpected_fpu_exception(struct pt_regs *, enum exception_code); -#define fpu_exception unexpected_fpu_exception - -struct task_struct; -struct fpu_state_struct; -static inline bool is_using_fpu(struct task_struct *tsk) { return false; } -static inline void set_using_fpu(struct task_struct *tsk) {} -static inline void clear_using_fpu(struct task_struct *tsk) {} -static inline void fpu_init_state(void) {} -static inline void fpu_save(struct fpu_state_struct *s) {} -static inline void fpu_kill_state(struct task_struct *tsk) {} -static inline void unlazy_fpu(struct task_struct *tsk) {} -static inline void exit_fpu(struct task_struct *tsk) {} -static inline void flush_fpu(void) {} -static inline int fpu_setup_sigcontext(struct fpucontext *buf) { return 0; } -static inline int fpu_restore_sigcontext(struct fpucontext *buf) { return 0; } -#endif /* CONFIG_FPU */ - -#endif /* __KERNEL__ */ -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_FPU_H */ diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc deleted file mode 100644 index 1c3eb4fda958..000000000000 --- a/arch/mn10300/include/asm/frame.inc +++ /dev/null @@ -1,97 +0,0 @@ -/* MN10300 Microcontroller core system register definitions -*- asm -*- - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_FRAME_INC -#define _ASM_FRAME_INC - -#ifndef __ASSEMBLY__ -#error not for use in C files -#endif - -#ifndef __ASM_OFFSETS_H__ -#include -#endif -#include - -#define pi break - -#define fp a3 - -############################################################################### -# -# build a stack frame from the registers -# - the caller has subtracted 4 from SP before coming here -# -############################################################################### -.macro SAVE_ALL - add -4,sp # next exception frame ptr save area - movm [other],(sp) - mov usp,a1 - mov a1,(sp) # USP in MOVM[other] dummy slot - movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) - mov sp,fp # FRAME pointer in A3 - add -12,sp # allow for calls to be made - - # push the exception frame onto the front of the list - GET_THREAD_INFO a1 - mov (TI_frame,a1),a0 - mov a0,(REG_NEXT,fp) - mov fp,(TI_frame,a1) - - # disable the FPU inside the kernel - and ~EPSW_FE,epsw - - # we may be holding current in E2 -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - mov (__current),e2 -#endif -.endm - -############################################################################### -# -# restore the registers from a stack frame -# -############################################################################### -.macro RESTORE_ALL - # peel back the stack to the calling frame - # - we need that when returning from interrupts to kernel mode - GET_THREAD_INFO a0 - mov (TI_frame,a0),fp - mov fp,sp - mov (REG_NEXT,fp),d0 - mov d0,(TI_frame,a0) # userspace has regs->next == 0 - -#ifndef CONFIG_MN10300_USING_JTAG - mov (REG_EPSW,fp),d0 - btst EPSW_T,d0 - beq 99f - - or EPSW_NMID,epsw - movhu (DCR),d1 - or 0x0001, d1 - movhu d1,(DCR) - -99: -#endif - movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother] - - # must restore usp even if returning to kernel space, - # when CONFIG_PREEMPT is enabled. - mov (sp),a1 # USP in MOVM[other] dummy slot - mov a1,usp - - movm (sp),[other] - add 8,sp - rti - -.endm - - -#endif /* _ASM_FRAME_INC */ diff --git a/arch/mn10300/include/asm/ftrace.h b/arch/mn10300/include/asm/ftrace.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/mn10300/include/asm/ftrace.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/mn10300/include/asm/futex.h b/arch/mn10300/include/asm/futex.h deleted file mode 100644 index 0b745828f42b..000000000000 --- a/arch/mn10300/include/asm/futex.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h deleted file mode 100644 index f5495ad82b77..000000000000 --- a/arch/mn10300/include/asm/gdb-stub.h +++ /dev/null @@ -1,182 +0,0 @@ -/* MN10300 Kernel GDB stub definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_GDB_STUB_H -#define _ASM_GDB_STUB_H - -#include - -/* - * register ID numbers in GDB remote protocol - */ - -#define GDB_REGID_PC 9 -#define GDB_REGID_FP 7 -#define GDB_REGID_SP 8 - -/* - * virtual stack layout for the GDB exception handler - */ -#define NUMREGS 64 - -#define GDB_FR_D0 (0 * 4) -#define GDB_FR_D1 (1 * 4) -#define GDB_FR_D2 (2 * 4) -#define GDB_FR_D3 (3 * 4) -#define GDB_FR_A0 (4 * 4) -#define GDB_FR_A1 (5 * 4) -#define GDB_FR_A2 (6 * 4) -#define GDB_FR_A3 (7 * 4) - -#define GDB_FR_SP (8 * 4) -#define GDB_FR_PC (9 * 4) -#define GDB_FR_MDR (10 * 4) -#define GDB_FR_EPSW (11 * 4) -#define GDB_FR_LIR (12 * 4) -#define GDB_FR_LAR (13 * 4) -#define GDB_FR_MDRQ (14 * 4) - -#define GDB_FR_E0 (15 * 4) -#define GDB_FR_E1 (16 * 4) -#define GDB_FR_E2 (17 * 4) -#define GDB_FR_E3 (18 * 4) -#define GDB_FR_E4 (19 * 4) -#define GDB_FR_E5 (20 * 4) -#define GDB_FR_E6 (21 * 4) -#define GDB_FR_E7 (22 * 4) - -#define GDB_FR_SSP (23 * 4) -#define GDB_FR_MSP (24 * 4) -#define GDB_FR_USP (25 * 4) -#define GDB_FR_MCRH (26 * 4) -#define GDB_FR_MCRL (27 * 4) -#define GDB_FR_MCVF (28 * 4) - -#define GDB_FR_FPCR (29 * 4) -#define GDB_FR_DUMMY0 (30 * 4) -#define GDB_FR_DUMMY1 (31 * 4) - -#define GDB_FR_FS0 (32 * 4) - -#define GDB_FR_SIZE (NUMREGS * 4) - -#ifndef __ASSEMBLY__ - -/* - * This is the same as above, but for the high-level - * part of the GDB stub. - */ - -struct gdb_regs { - /* saved main processor registers */ - u32 d0, d1, d2, d3, a0, a1, a2, a3; - u32 sp, pc, mdr, epsw, lir, lar, mdrq; - u32 e0, e1, e2, e3, e4, e5, e6, e7; - u32 ssp, msp, usp, mcrh, mcrl, mcvf; - - /* saved floating point registers */ - u32 fpcr, _dummy0, _dummy1; - u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7; - u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15; - u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23; - u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31; -}; - -/* - * Prototypes - */ -extern void show_registers_only(struct pt_regs *regs); - -extern asmlinkage void gdbstub_init(void); -extern asmlinkage void gdbstub_exit(int status); -extern asmlinkage void gdbstub_io_init(void); -extern asmlinkage void gdbstub_io_set_baud(unsigned baud); -extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock); -extern asmlinkage void gdbstub_io_tx_char(unsigned char ch); -extern asmlinkage void gdbstub_io_tx_flush(void); - -extern asmlinkage void gdbstub_io_rx_handler(void); -extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code); -extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code); -extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code); -extern asmlinkage void __gdbstub_bug_trap(void); -extern asmlinkage void __gdbstub_pause(void); - -#ifdef CONFIG_MN10300_CACHE_ENABLED -extern asmlinkage void gdbstub_purge_cache(void); -#else -#define gdbstub_purge_cache() do {} while (0) -#endif - -/* Used to prevent crashes in memory access */ -extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *); -extern asmlinkage int gdbstub_read_word(const u8 *, u8 *); -extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *); -extern asmlinkage int gdbstub_write_byte(u32, u8 *); -extern asmlinkage int gdbstub_write_word(u32, u8 *); -extern asmlinkage int gdbstub_write_dword(u32, u8 *); - -extern asmlinkage void gdbstub_read_byte_guard(void); -extern asmlinkage void gdbstub_read_byte_cont(void); -extern asmlinkage void gdbstub_read_word_guard(void); -extern asmlinkage void gdbstub_read_word_cont(void); -extern asmlinkage void gdbstub_read_dword_guard(void); -extern asmlinkage void gdbstub_read_dword_cont(void); -extern asmlinkage void gdbstub_write_byte_guard(void); -extern asmlinkage void gdbstub_write_byte_cont(void); -extern asmlinkage void gdbstub_write_word_guard(void); -extern asmlinkage void gdbstub_write_word_cont(void); -extern asmlinkage void gdbstub_write_dword_guard(void); -extern asmlinkage void gdbstub_write_dword_cont(void); - -extern u8 gdbstub_rx_buffer[PAGE_SIZE]; -extern u32 gdbstub_rx_inp; -extern u32 gdbstub_rx_outp; -extern u8 gdbstub_rx_overflow; -extern u8 gdbstub_busy; -extern u8 gdbstub_rx_unget; - -#ifdef CONFIG_GDBSTUB_DEBUGGING -extern void gdbstub_printk(const char *fmt, ...) - __attribute__((format(printf, 1, 2))); -#else -static inline __attribute__((format(printf, 1, 2))) -void gdbstub_printk(const char *fmt, ...) -{ -} -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY -#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_entry(FMT, ...) no_printk(FMT, ##__VA_ARGS__) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL -#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_proto(FMT, ...) no_printk(FMT, ##__VA_ARGS__) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_IO -#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_io(FMT, ...) no_printk(FMT, ##__VA_ARGS__) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT -#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_bkpt(FMT, ...) no_printk(FMT, ##__VA_ARGS__) -#endif - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_GDB_STUB_H */ diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h deleted file mode 100644 index 0000d650b55f..000000000000 --- a/arch/mn10300/include/asm/hardirq.h +++ /dev/null @@ -1,49 +0,0 @@ -/* MN10300 Hardware IRQ statistics and management - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HARDIRQ_H -#define _ASM_HARDIRQ_H - -#include -#include -#include - -/* assembly code in softirq.h is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; -#ifdef CONFIG_MN10300_WD_TIMER - unsigned int __nmi_count; /* arch dependent */ - unsigned int __irq_count; /* arch dependent */ -#endif -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -extern void ack_bad_irq(int irq); - -/* - * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table - * - these should jump to __common_exception in entry.S unless there's a good - * reason to do otherwise (see trap_preinit() in traps.c) - */ -typedef void (*intr_stub_fnx)(struct pt_regs *regs, - enum exception_code intcode); - -/* - * manipulate pointers in the Exception table (see entry.S) - * - these are indexed by decoding the lower 24 bits of the TBR register - * - note that the MN103E010 doesn't always trap through the correct vector, - * but does always set the TBR correctly - */ -extern asmlinkage void set_excp_vector(enum exception_code code, - intr_stub_fnx handler); - -#endif /* _ASM_HARDIRQ_H */ diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h deleted file mode 100644 index 1ddea5afba09..000000000000 --- a/arch/mn10300/include/asm/highmem.h +++ /dev/null @@ -1,131 +0,0 @@ -/* MN10300 Virtual kernel memory mappings for high memory - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-i386/highmem.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* undef for production */ -#undef HIGHMEM_DEBUG - -/* declarations for highmem.c */ -extern unsigned long highstart_pfn, highend_pfn; - -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - -extern void __init kmap_init(void); - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define PKMAP_BASE 0xfe000000UL -#define LAST_PKMAP 1024 -#define LAST_PKMAP_MASK (LAST_PKMAP - 1) -#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -extern unsigned long kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -static inline unsigned long kmap(struct page *page) -{ - if (in_interrupt()) - BUG(); - if (page < highmem_start_page) - return page_address(page); - return kmap_high(page); -} - -static inline void kunmap(struct page *page) -{ - if (in_interrupt()) - BUG(); - if (page < highmem_start_page) - return; - kunmap_high(page); -} - -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -static inline void *kmap_atomic(struct page *page) -{ - unsigned long vaddr; - int idx, type; - - preempt_disable(); - pagefault_disable(); - if (page < highmem_start_page) - return page_address(page); - - type = kmap_atomic_idx_push(); - idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); -#if HIGHMEM_DEBUG - if (!pte_none(*(kmap_pte - idx))) - BUG(); -#endif - set_pte(kmap_pte - idx, mk_pte(page, kmap_prot)); - local_flush_tlb_one(vaddr); - - return (void *)vaddr; -} - -static inline void __kunmap_atomic(unsigned long vaddr) -{ - int type; - - if (vaddr < FIXADDR_START) { /* FIXME */ - pagefault_enable(); - preempt_enable(); - return; - } - - type = kmap_atomic_idx(); - -#if HIGHMEM_DEBUG - { - unsigned int idx; - idx = type + KM_TYPE_NR * smp_processor_id(); - - if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)) - BUG(); - - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(kmap_pte - idx); - local_flush_tlb_one(vaddr); - } -#endif - - kmap_atomic_idx_pop(); - pagefault_enable(); - preempt_enable(); -} -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/mn10300/include/asm/hw_irq.h b/arch/mn10300/include/asm/hw_irq.h deleted file mode 100644 index 70619901098e..000000000000 --- a/arch/mn10300/include/asm/hw_irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* MN10300 Hardware interrupt definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -#endif /* _ASM_HW_IRQ_H */ diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h deleted file mode 100644 index d65bbeebe50a..000000000000 --- a/arch/mn10300/include/asm/intctl-regs.h +++ /dev/null @@ -1,71 +0,0 @@ -/* MN10300 On-board interrupt controller registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_INTCTL_REGS_H -#define _ASM_INTCTL_REGS_H - -#include - -#ifdef __KERNEL__ - -/* - * Interrupt controller registers - * - Registers 64-191 are at addresses offset from the main array - */ -#define GxICR(X) \ - __SYSREG(0xd4000000 + (X) * 4 + \ - (((X) >= 64) && ((X) < 192)) * 0xf00, u16) - -#define GxICR_u8(X) \ - __SYSREG(0xd4000000 + (X) * 4 + \ - (((X) >= 64) && ((X) < 192)) * 0xf00, u8) - -#include - -#define XIRQ_TRIGGER_LOWLEVEL 0 -#define XIRQ_TRIGGER_HILEVEL 1 -#define XIRQ_TRIGGER_NEGEDGE 2 -#define XIRQ_TRIGGER_POSEDGE 3 - -/* non-maskable interrupt control */ -#define NMIIRQ 0 -#define NMICR GxICR(NMIIRQ) /* NMI control register */ -#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */ -#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */ -#define NMICR_ABUSERR 0x0008 /* async bus error flag */ - -/* maskable interrupt control */ -#define GxICR_DETECT 0x0001 /* interrupt detect flag */ -#define GxICR_REQUEST 0x0010 /* interrupt request flag */ -#define GxICR_ENABLE 0x0100 /* interrupt enable flag */ -#define GxICR_LEVEL 0x7000 /* interrupt priority level */ -#define GxICR_LEVEL_0 0x0000 /* - level 0 */ -#define GxICR_LEVEL_1 0x1000 /* - level 1 */ -#define GxICR_LEVEL_2 0x2000 /* - level 2 */ -#define GxICR_LEVEL_3 0x3000 /* - level 3 */ -#define GxICR_LEVEL_4 0x4000 /* - level 4 */ -#define GxICR_LEVEL_5 0x5000 /* - level 5 */ -#define GxICR_LEVEL_6 0x6000 /* - level 6 */ -#define GxICR_LEVEL_SHIFT 12 -#define GxICR_NMI 0x8000 /* nmi request flag */ - -#define NUM2GxICR_LEVEL(num) ((num) << GxICR_LEVEL_SHIFT) - -#ifndef __ASSEMBLY__ -extern void set_intr_level(int irq, u16 level); -extern void mn10300_set_lateack_irq_type(int irq); -#endif - -/* external interrupts */ -#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_INTCTL_REGS_H */ diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h deleted file mode 100644 index 62189353d2f6..000000000000 --- a/arch/mn10300/include/asm/io.h +++ /dev/null @@ -1,325 +0,0 @@ -/* MN10300 I/O port emulation and memory-mapped I/O - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IO_H -#define _ASM_IO_H - -#include /* I/O is all done through memory accesses */ -#include -#include -#include - -#define mmiowb() do {} while (0) - -/*****************************************************************************/ -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ -static inline u8 readb(const volatile void __iomem *addr) -{ - return *(const volatile u8 *) addr; -} - -static inline u16 readw(const volatile void __iomem *addr) -{ - return *(const volatile u16 *) addr; -} - -static inline u32 readl(const volatile void __iomem *addr) -{ - return *(const volatile u32 *) addr; -} - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -static inline void writeb(u8 b, volatile void __iomem *addr) -{ - *(volatile u8 *) addr = b; -} - -static inline void writew(u16 b, volatile void __iomem *addr) -{ - *(volatile u16 *) addr = b; -} - -static inline void writel(u32 b, volatile void __iomem *addr) -{ - *(volatile u32 *) addr = b; -} - -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -#define writeb_relaxed writeb -#define writew_relaxed writew -#define writel_relaxed writel - -/*****************************************************************************/ -/* - * traditional input/output functions - */ -static inline u8 inb_local(unsigned long addr) -{ - return readb((volatile void __iomem *) addr); -} - -static inline void outb_local(u8 b, unsigned long addr) -{ - return writeb(b, (volatile void __iomem *) addr); -} - -static inline u8 inb(unsigned long addr) -{ - return readb((volatile void __iomem *) addr); -} - -static inline u16 inw(unsigned long addr) -{ - return readw((volatile void __iomem *) addr); -} - -static inline u32 inl(unsigned long addr) -{ - return readl((volatile void __iomem *) addr); -} - -static inline void outb(u8 b, unsigned long addr) -{ - return writeb(b, (volatile void __iomem *) addr); -} - -static inline void outw(u16 b, unsigned long addr) -{ - return writew(b, (volatile void __iomem *) addr); -} - -static inline void outl(u32 b, unsigned long addr) -{ - return writel(b, (volatile void __iomem *) addr); -} - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x, addr) outb((x), (addr)) -#define outw_p(x, addr) outw((x), (addr)) -#define outl_p(x, addr) outl((x), (addr)) - -static inline void insb(unsigned long addr, void *buffer, int count) -{ - if (count) { - u8 *buf = buffer; - do { - u8 x = inb(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void insw(unsigned long addr, void *buffer, int count) -{ - if (count) { - u16 *buf = buffer; - do { - u16 x = inw(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void insl(unsigned long addr, void *buffer, int count) -{ - if (count) { - u32 *buf = buffer; - do { - u32 x = inl(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void outsb(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u8 *buf = buffer; - do { - outb(*buf++, addr); - } while (--count); - } -} - -static inline void outsw(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u16 *buf = buffer; - do { - outw(*buf++, addr); - } while (--count); - } -} - -extern void __outsl(unsigned long addr, const void *buffer, int count); -static inline void outsl(unsigned long addr, const void *buffer, int count) -{ - if ((unsigned long) buffer & 0x3) - return __outsl(addr, buffer, count); - - if (count) { - const u32 *buf = buffer; - do { - outl(*buf++, addr); - } while (--count); - } -} - -#define ioread8(addr) readb(addr) -#define ioread16(addr) readw(addr) -#define ioread32(addr) readl(addr) - -#define iowrite8(v, addr) writeb((v), (addr)) -#define iowrite16(v, addr) writew((v), (addr)) -#define iowrite32(v, addr) writel((v), (addr)) - -#define ioread16be(addr) be16_to_cpu(readw(addr)) -#define ioread32be(addr) be32_to_cpu(readl(addr)) -#define iowrite16be(v, addr) writew(cpu_to_be16(v), (addr)) -#define iowrite32be(v, addr) writel(cpu_to_be32(v), (addr)) - -#define ioread8_rep(p, dst, count) \ - insb((unsigned long) (p), (dst), (count)) -#define ioread16_rep(p, dst, count) \ - insw((unsigned long) (p), (dst), (count)) -#define ioread32_rep(p, dst, count) \ - insl((unsigned long) (p), (dst), (count)) - -#define iowrite8_rep(p, src, count) \ - outsb((unsigned long) (p), (src), (count)) -#define iowrite16_rep(p, src, count) \ - outsw((unsigned long) (p), (src), (count)) -#define iowrite32_rep(p, src, count) \ - outsl((unsigned long) (p), (src), (count)) - -#define readsb(p, dst, count) \ - insb((unsigned long) (p), (dst), (count)) -#define readsw(p, dst, count) \ - insw((unsigned long) (p), (dst), (count)) -#define readsl(p, dst, count) \ - insl((unsigned long) (p), (dst), (count)) - -#define writesb(p, src, count) \ - outsb((unsigned long) (p), (src), (count)) -#define writesw(p, src, count) \ - outsw((unsigned long) (p), (src), (count)) -#define writesl(p, src, count) \ - outsl((unsigned long) (p), (src), (count)) - -#define IO_SPACE_LIMIT 0xffffffff - -#ifdef __KERNEL__ - -#include -#define __io_virt(x) ((void *) (x)) - -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -struct pci_dev; -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) -{ -} - -/* - * Change virtual addresses to physical addresses and vv. - * These are pretty trivial - */ -static inline unsigned long virt_to_phys(volatile void *address) -{ - return __pa(address); -} - -static inline void *phys_to_virt(unsigned long address) -{ - return __va(address); -} - -/* - * Change "struct page" to physical address. - */ -static inline void __iomem *__ioremap(unsigned long offset, unsigned long size, - unsigned long flags) -{ - return (void __iomem *) offset; -} - -static inline void __iomem *ioremap(unsigned long offset, unsigned long size) -{ - return (void __iomem *)(offset & ~0x20000000); -} - -/* - * This one maps high address device memory and turns off caching for that - * area. it's useful if some control registers are in such an area and write - * combining or read caching is not desirable: - */ -static inline void __iomem *ioremap_nocache(unsigned long offset, unsigned long size) -{ - return (void __iomem *) (offset | 0x20000000); -} - -#define ioremap_wc ioremap_nocache -#define ioremap_wt ioremap_nocache -#define ioremap_uc ioremap_nocache - -static inline void iounmap(void __iomem *addr) -{ -} - -static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - return (void __iomem *) port; -} - -static inline void ioport_unmap(void __iomem *p) -{ -} - -#define xlate_dev_kmem_ptr(p) ((void *) (p)) -#define xlate_dev_mem_ptr(p) ((void *) (p)) - -/* - * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff - */ -static inline unsigned long virt_to_bus(volatile void *address) -{ - return ((unsigned long) address) & ~0x20000000; -} - -static inline void *bus_to_virt(unsigned long address) -{ - return (void *) address; -} - -#define page_to_bus page_to_phys - -#define memset_io(a, b, c) memset(__io_virt(a), (b), (c)) -#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c)) -#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c)) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IO_H */ diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h deleted file mode 100644 index 1a73fb3f60c6..000000000000 --- a/arch/mn10300/include/asm/irq.h +++ /dev/null @@ -1,40 +0,0 @@ -/* MN10300 Hardware interrupt definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - Derived from include/asm-i386/irq.h: - * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -#include -#include -#include - -/* this number is used when no interrupt has been assigned */ -#define NO_IRQ INT_MAX - -/* - * hardware irq numbers - * - the ASB2364 has an FPGA with an IRQ multiplexer on it - */ -#ifdef CONFIG_MN10300_UNIT_ASB2364 -#include -#else -#define NR_CPU_IRQS GxICR_NUM_IRQS -#define NR_IRQS NR_CPU_IRQS -#endif - -/* external hardware irq numbers */ -#define NR_XIRQS GxICR_NUM_XIRQS - -#define irq_canonicalize(IRQ) (IRQ) - -#endif /* _ASM_IRQ_H */ diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h deleted file mode 100644 index 97d0cb5af807..000000000000 --- a/arch/mn10300/include/asm/irq_regs.h +++ /dev/null @@ -1,28 +0,0 @@ -/* MN10300 IRQ registers pointer definition - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IRQ_REGS_H -#define _ASM_IRQ_REGS_H - -/* - * Per-cpu current frame pointer - the location of the last exception frame on - * the stack - */ -#define ARCH_HAS_OWN_IRQ_REGS - -#ifndef __ASSEMBLY__ -static inline __attribute__((const)) -struct pt_regs *get_irq_regs(void) -{ - return current_frame(); -} -#endif - -#endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h deleted file mode 100644 index 8730c0a3c37d..000000000000 --- a/arch/mn10300/include/asm/irqflags.h +++ /dev/null @@ -1,215 +0,0 @@ -/* MN10300 IRQ flag handling - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_IRQFLAGS_H -#define _ASM_IRQFLAGS_H - -#include -/* linux/smp.h <- linux/irqflags.h needs asm/smp.h first */ -#include - -/* - * interrupt control - * - "disabled": run in IM1/2 - * - level 0 - kernel debugger - * - level 1 - virtual serial DMA (if present) - * - level 5 - normal interrupt priority - * - level 6 - timer interrupt - * - "enabled": run in IM7 - */ -#define MN10300_CLI_LEVEL (CONFIG_LINUX_CLI_LEVEL << EPSW_IM_SHIFT) - -#ifndef __ASSEMBLY__ - -static inline unsigned long arch_local_save_flags(void) -{ - unsigned long flags; - - asm volatile("mov epsw,%0" : "=d"(flags)); - return flags; -} - -static inline void arch_local_irq_disable(void) -{ - asm volatile( - " and %0,epsw \n" - " or %1,epsw \n" - " nop \n" - " nop \n" - " nop \n" - : - : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) - : "memory"); -} - -static inline unsigned long arch_local_irq_save(void) -{ - unsigned long flags; - - flags = arch_local_save_flags(); - arch_local_irq_disable(); - return flags; -} - -/* - * we make sure arch_irq_enable() doesn't cause priority inversion - */ -extern unsigned long __mn10300_irq_enabled_epsw[]; - -static inline void arch_local_irq_enable(void) -{ - unsigned long tmp; - int cpu = raw_smp_processor_id(); - - asm volatile( - " mov epsw,%0 \n" - " and %1,%0 \n" - " or %2,%0 \n" - " mov %0,epsw \n" - : "=&d"(tmp) - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu]) - : "memory", "cc"); -} - -static inline void arch_local_irq_restore(unsigned long flags) -{ - asm volatile( - " mov %0,epsw \n" - " nop \n" - " nop \n" - " nop \n" - : - : "d"(flags) - : "memory", "cc"); -} - -static inline bool arch_irqs_disabled_flags(unsigned long flags) -{ - return (flags & (EPSW_IE | EPSW_IM)) != (EPSW_IE | EPSW_IM_7); -} - -static inline bool arch_irqs_disabled(void) -{ - return arch_irqs_disabled_flags(arch_local_save_flags()); -} - -/* - * Hook to save power by halting the CPU - * - called from the idle loop - * - must reenable interrupts (which takes three instruction cycles to complete) - */ -static inline void arch_safe_halt(void) -{ -#ifdef CONFIG_SMP - arch_local_irq_enable(); -#else - asm volatile( - " or %0,epsw \n" - " nop \n" - " nop \n" - " bset %2,(%1) \n" - : - : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP) - : "cc"); -#endif -} - -#define __sleep_cpu() \ -do { \ - asm volatile( \ - " bset %1,(%0)\n" \ - "1: btst %1,(%0)\n" \ - " bne 1b\n" \ - : \ - : "i"(&CPUM), "i"(CPUM_SLEEP) \ - : "cc" \ - ); \ -} while (0) - -static inline void arch_local_cli(void) -{ - asm volatile( - " and %0,epsw \n" - " nop \n" - " nop \n" - " nop \n" - : - : "i"(~EPSW_IE) - : "memory" - ); -} - -static inline unsigned long arch_local_cli_save(void) -{ - unsigned long flags = arch_local_save_flags(); - arch_local_cli(); - return flags; -} - -static inline void arch_local_sti(void) -{ - asm volatile( - " or %0,epsw \n" - : - : "i"(EPSW_IE) - : "memory"); -} - -static inline void arch_local_change_intr_mask_level(unsigned long level) -{ - asm volatile( - " and %0,epsw \n" - " or %1,epsw \n" - : - : "i"(~EPSW_IM), "i"(EPSW_IE | level) - : "cc", "memory"); -} - -#else /* !__ASSEMBLY__ */ - -#define LOCAL_SAVE_FLAGS(reg) \ - mov epsw,reg - -#define LOCAL_IRQ_DISABLE \ - and ~EPSW_IM,epsw; \ - or EPSW_IE|MN10300_CLI_LEVEL,epsw; \ - nop; \ - nop; \ - nop - -#define LOCAL_IRQ_ENABLE \ - or EPSW_IE|EPSW_IM_7,epsw - -#define LOCAL_IRQ_RESTORE(reg) \ - mov reg,epsw - -#define LOCAL_CLI_SAVE(reg) \ - mov epsw,reg; \ - and ~EPSW_IE,epsw; \ - nop; \ - nop; \ - nop - -#define LOCAL_CLI \ - and ~EPSW_IE,epsw; \ - nop; \ - nop; \ - nop - -#define LOCAL_STI \ - or EPSW_IE,epsw - -#define LOCAL_CHANGE_INTR_MASK_LEVEL(level) \ - and ~EPSW_IM,epsw; \ - or EPSW_IE|(level),epsw - -#endif /* __ASSEMBLY__ */ -#endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/mn10300/include/asm/kdebug.h b/arch/mn10300/include/asm/kdebug.h deleted file mode 100644 index 0f47e112190c..000000000000 --- a/arch/mn10300/include/asm/kdebug.h +++ /dev/null @@ -1,22 +0,0 @@ -/* MN10300 In-kernel death knells - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_KDEBUG_H -#define _ASM_KDEBUG_H - -/* Grossly misnamed. */ -enum die_val { - DIE_OOPS = 1, - DIE_BREAKPOINT, - DIE_GPF, -}; - -#endif /* _ASM_KDEBUG_H */ diff --git a/arch/mn10300/include/asm/kgdb.h b/arch/mn10300/include/asm/kgdb.h deleted file mode 100644 index eb245f18a708..000000000000 --- a/arch/mn10300/include/asm/kgdb.h +++ /dev/null @@ -1,81 +0,0 @@ -/* Kernel debugger for MN10300 - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_KGDB_H -#define _ASM_KGDB_H - -/* - * BUFMAX defines the maximum number of characters in inbound/outbound - * buffers at least NUMREGBYTES*2 are needed for register packets - * Longer buffer is needed to list all threads - */ -#define BUFMAX 1024 - -/* - * Note that this register image is in a different order than the register - * image that Linux produces at interrupt time. - */ -enum regnames { - GDB_FR_D0 = 0, - GDB_FR_D1 = 1, - GDB_FR_D2 = 2, - GDB_FR_D3 = 3, - GDB_FR_A0 = 4, - GDB_FR_A1 = 5, - GDB_FR_A2 = 6, - GDB_FR_A3 = 7, - - GDB_FR_SP = 8, - GDB_FR_PC = 9, - GDB_FR_MDR = 10, - GDB_FR_EPSW = 11, - GDB_FR_LIR = 12, - GDB_FR_LAR = 13, - GDB_FR_MDRQ = 14, - - GDB_FR_E0 = 15, - GDB_FR_E1 = 16, - GDB_FR_E2 = 17, - GDB_FR_E3 = 18, - GDB_FR_E4 = 19, - GDB_FR_E5 = 20, - GDB_FR_E6 = 21, - GDB_FR_E7 = 22, - - GDB_FR_SSP = 23, - GDB_FR_MSP = 24, - GDB_FR_USP = 25, - GDB_FR_MCRH = 26, - GDB_FR_MCRL = 27, - GDB_FR_MCVF = 28, - - GDB_FR_FPCR = 29, - GDB_FR_DUMMY0 = 30, - GDB_FR_DUMMY1 = 31, - - GDB_FR_FS0 = 32, - - GDB_FR_SIZE = 64, -}; - -#define GDB_ORIG_D0 41 -#define NUMREGBYTES (GDB_FR_SIZE*4) - -static inline void arch_kgdb_breakpoint(void) -{ - asm(".globl __arch_kgdb_breakpoint; __arch_kgdb_breakpoint: break"); -} -extern u8 __arch_kgdb_breakpoint; - -#define BREAK_INSTR_SIZE 1 -#define CACHE_FLUSH_IS_SAFE 1 - -#endif /* _ASM_KGDB_H */ diff --git a/arch/mn10300/include/asm/kmap_types.h b/arch/mn10300/include/asm/kmap_types.h deleted file mode 100644 index f444d7ffa766..000000000000 --- a/arch/mn10300/include/asm/kmap_types.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -#include - -#endif /* _ASM_KMAP_TYPES_H */ diff --git a/arch/mn10300/include/asm/kprobes.h b/arch/mn10300/include/asm/kprobes.h deleted file mode 100644 index 7abea0bdb549..000000000000 --- a/arch/mn10300/include/asm/kprobes.h +++ /dev/null @@ -1,55 +0,0 @@ -/* MN10300 Kernel Probes support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public Licence as published by - * the Free Software Foundation; either version 2 of the Licence, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public Licence for more details. - * - * You should have received a copy of the GNU General Public Licence - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ -#ifndef _ASM_KPROBES_H -#define _ASM_KPROBES_H - -#include - -#define BREAKPOINT_INSTRUCTION 0xff - -#ifdef CONFIG_KPROBES -#include -#include - -struct kprobe; - -typedef unsigned char kprobe_opcode_t; -#define MAX_INSN_SIZE 8 -#define MAX_STACK_SIZE 128 - -/* Architecture specific copy of original instruction */ -struct arch_specific_insn { - /* copy of original instruction - */ - kprobe_opcode_t insn[MAX_INSN_SIZE]; -}; - -extern const int kretprobe_blacklist_size; - -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -#define flush_insn_slot(p) do {} while (0) - -extern void arch_remove_kprobe(struct kprobe *p); - -#endif /* CONFIG_KPROBES */ -#endif /* _ASM_KPROBES_H */ diff --git a/arch/mn10300/include/asm/linkage.h b/arch/mn10300/include/asm/linkage.h deleted file mode 100644 index dda3002a5dfa..000000000000 --- a/arch/mn10300/include/asm/linkage.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Linkage and calling-convention overrides - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_LINKAGE_H -#define _ASM_LINKAGE_H - -/* don't override anything */ -#define asmlinkage - -#define __ALIGN .align 4,0xcb -#define __ALIGN_STR ".align 4,0xcb" - -#endif diff --git a/arch/mn10300/include/asm/local.h b/arch/mn10300/include/asm/local.h deleted file mode 100644 index c11c530f74d0..000000000000 --- a/arch/mn10300/include/asm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/local64.h b/arch/mn10300/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/mn10300/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/mc146818rtc.h b/arch/mn10300/include/asm/mc146818rtc.h deleted file mode 100644 index df6bc6e0e8c6..000000000000 --- a/arch/mn10300/include/asm/mc146818rtc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/mmu.h b/arch/mn10300/include/asm/mmu.h deleted file mode 100644 index b9d6d41adace..000000000000 --- a/arch/mn10300/include/asm/mmu.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* MN10300 Memory management context - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-frv/mmu.h - */ - -#ifndef _ASM_MMU_H -#define _ASM_MMU_H - -/* - * MMU context - */ -typedef struct { - unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on - * each CPU */ -} mm_context_t; - -#endif /* _ASM_MMU_H */ diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h deleted file mode 100644 index d2034f5e6eda..000000000000 --- a/arch/mn10300/include/asm/mmu_context.h +++ /dev/null @@ -1,163 +0,0 @@ -/* MN10300 MMU context management - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - Derived from include/asm-m32r/mmu_context.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * - * This implements an algorithm to provide TLB PID mappings to provide - * selective access to the TLB for processes, thus reducing the number of TLB - * flushes required. - * - * Note, however, that the M32R algorithm is technically broken as it does not - * handle version wrap-around, and could, theoretically, have a problem with a - * very long lived program that sleeps long enough for the version number to - * wrap all the way around so that its TLB mappings appear valid once again. - */ -#ifndef _ASM_MMU_CONTEXT_H -#define _ASM_MMU_CONTEXT_H - -#include -#include - -#include -#include -#include - -#define MMU_CONTEXT_TLBPID_NR 256 -#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL -#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL -#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL -#define MMU_NO_CONTEXT 0x00000000UL -#define MMU_CONTEXT_TLBPID_LOCK_NR 0 - -#define enter_lazy_tlb(mm, tsk) do {} while (0) - -static inline void cpu_ran_vm(int cpu, struct mm_struct *mm) -{ -#ifdef CONFIG_SMP - cpumask_set_cpu(cpu, mm_cpumask(mm)); -#endif -} - -static inline bool cpu_maybe_ran_vm(int cpu, struct mm_struct *mm) -{ -#ifdef CONFIG_SMP - return cpumask_test_and_set_cpu(cpu, mm_cpumask(mm)); -#else - return true; -#endif -} - -#ifdef CONFIG_MN10300_TLB_USE_PIDR -extern unsigned long mmu_context_cache[NR_CPUS]; -#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) - -/** - * allocate_mmu_context - Allocate storage for the arch-specific MMU data - * @mm: The userspace VM context being set up - */ -static inline unsigned long allocate_mmu_context(struct mm_struct *mm) -{ - unsigned long *pmc = &mmu_context_cache[smp_processor_id()]; - unsigned long mc = ++(*pmc); - - if (!(mc & MMU_CONTEXT_TLBPID_MASK)) { - /* we exhausted the TLB PIDs of this version on this CPU, so we - * flush this CPU's TLB in its entirety and start new cycle */ - local_flush_tlb_all(); - - /* fix the TLB version if needed (we avoid version #0 so as to - * distinguish MMU_NO_CONTEXT) */ - if (!mc) - *pmc = mc = MMU_CONTEXT_FIRST_VERSION; - } - mm_context(mm) = mc; - return mc; -} - -/* - * get an MMU context if one is needed - */ -static inline unsigned long get_mmu_context(struct mm_struct *mm) -{ - unsigned long mc = MMU_NO_CONTEXT, cache; - - if (mm) { - cache = mmu_context_cache[smp_processor_id()]; - mc = mm_context(mm); - - /* if we have an old version of the context, replace it */ - if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK) - mc = allocate_mmu_context(mm); - } - return mc; -} - -/* - * initialise the context related info for a new mm_struct instance - */ -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - int num_cpus = NR_CPUS, i; - - for (i = 0; i < num_cpus; i++) - mm->context.tlbpid[i] = MMU_NO_CONTEXT; - return 0; -} - -/* - * after we have set current->mm to a new value, this activates the context for - * the new mm so we see the new mappings. - */ -static inline void activate_context(struct mm_struct *mm) -{ - PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK; -} -#else /* CONFIG_MN10300_TLB_USE_PIDR */ - -#define init_new_context(tsk, mm) (0) -#define activate_context(mm) local_flush_tlb() - -#endif /* CONFIG_MN10300_TLB_USE_PIDR */ - -/** - * destroy_context - Destroy mm context information - * @mm: The MM being destroyed. - * - * Destroy context related info for an mm_struct that is about to be put to - * rest - */ -#define destroy_context(mm) do {} while (0) - -/** - * switch_mm - Change between userspace virtual memory contexts - * @prev: The outgoing MM context. - * @next: The incoming MM context. - * @tsk: The incoming task. - */ -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - int cpu = smp_processor_id(); - - if (prev != next) { -#ifdef CONFIG_SMP - per_cpu(cpu_tlbstate, cpu).active_mm = next; -#endif - cpu_ran_vm(cpu, next); - PTBR = (unsigned long) next->pgd; - activate_context(next); - } -} - -#define deactivate_mm(tsk, mm) do {} while (0) -#define activate_mm(prev, next) switch_mm((prev), (next), NULL) - -#endif /* _ASM_MMU_CONTEXT_H */ diff --git a/arch/mn10300/include/asm/module.h b/arch/mn10300/include/asm/module.h deleted file mode 100644 index 6571103b0518..000000000000 --- a/arch/mn10300/include/asm/module.h +++ /dev/null @@ -1,22 +0,0 @@ -/* MN10300 Arch-specific module definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * Derived from include/asm-i386/module.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_MODULE_H -#define _ASM_MODULE_H - -#include - -/* - * Include the MN10300 architecture version. - */ -#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " - -#endif /* _ASM_MODULE_H */ diff --git a/arch/mn10300/include/asm/nmi.h b/arch/mn10300/include/asm/nmi.h deleted file mode 100644 index b05627597b1b..000000000000 --- a/arch/mn10300/include/asm/nmi.h +++ /dev/null @@ -1,16 +0,0 @@ -/* MN10300 NMI handling - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_NMI_H -#define _ASM_NMI_H - -extern void arch_touch_nmi_watchdog(void); - -#endif /* _ASM_NMI_H */ diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h deleted file mode 100644 index dfe730a5ede0..000000000000 --- a/arch/mn10300/include/asm/page.h +++ /dev/null @@ -1,130 +0,0 @@ -/* MN10300 Page table definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PAGE_H -#define _ASM_PAGE_H - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 - -#ifndef __ASSEMBLY__ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE - 1)) -#else -#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an - * immediate val not an addr */ -#define PAGE_MASK +(~(PAGE_SIZE - 1)) -#endif - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) -#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) - -#define clear_user_page(addr, vaddr, page) clear_page(addr) -#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define PTE_MASK PAGE_MASK -#define HPAGE_SHIFT 22 - -#ifdef CONFIG_HUGETLB_PAGE -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -#endif - -#define pte_val(x) ((x).pte) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) }) -#define __pgd(x) ((pgd_t) { (x) }) -#define __pgprot(x) ((pgprot_t) { (x) }) - -#define __ARCH_USE_5LEVEL_HACK -#include - -#endif /* !__ASSEMBLY__ */ - -/* - * This handles the memory map.. We could make this a config - * option, but too many people screw it up, and too few need - * it. - * - * A __PAGE_OFFSET of 0xC0000000 means that the kernel has - * a virtual address space of one gigabyte, which limits the - * amount of physical memory you can use to about 950MB. - */ - -#ifndef __ASSEMBLY__ - -/* Pure 2^n version of get_order */ -static inline int get_order(unsigned long size) __attribute__((const)); -static inline int get_order(unsigned long size) -{ - int order; - - size = (size - 1) >> (PAGE_SHIFT - 1); - order = -1; - do { - size >>= 1; - order++; - } while (size); - return order; -} - -#endif /* __ASSEMBLY__ */ - -#include - -#define __PAGE_OFFSET (PAGE_OFFSET_RAW) -#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET) - -/* - * main RAM and kernel working space are coincident at 0x90000000, but to make - * life more interesting, there's also an uncached virtual shadow at 0xb0000000 - * - these mappings are fixed in the MMU - */ -#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT) - -#define __pa(x) ((unsigned long)(x)) -#define __va(x) ((void *)(unsigned long)(x)) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp)) -#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp) -#define __pfn_to_phys(pfn) PFN_PHYS(pfn) - -#define pfn_valid(pfn) \ -({ \ - unsigned long __pfn = (pfn) - __pfn_disp; \ - __pfn < max_mapnr; \ -}) - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS \ - (VM_READ | VM_WRITE | \ - ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PAGE_H */ diff --git a/arch/mn10300/include/asm/page_offset.h b/arch/mn10300/include/asm/page_offset.h deleted file mode 100644 index 1e869aa09418..000000000000 --- a/arch/mn10300/include/asm/page_offset.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* MN10300 Kernel base address - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - */ -#ifndef _ASM_PAGE_OFFSET_H -#define _ASM_PAGE_OFFSET_H - -#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS - -#endif diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h deleted file mode 100644 index 5b75a1b2c4f6..000000000000 --- a/arch/mn10300/include/asm/pci.h +++ /dev/null @@ -1,84 +0,0 @@ -/* MN10300 PCI definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PCI_H -#define _ASM_PCI_H - -#ifdef __KERNEL__ -#include /* for struct page */ - -#if 0 -#define __pcbdebug(FMT, ADDR, ...) \ - printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \ - (u32)(ADDR), ##__VA_ARGS__) - -#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \ -do { \ - printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \ - (BUS)->number, \ - PCI_SLOT(DEVFN), \ - PCI_FUNC(DEVFN), \ - (u32)(WHERE), ##__VA_ARGS__); \ -} while (0) - -#else -#define __pcbdebug(FMT, ADDR, ...) do {} while (0) -#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0) -#endif - -/* Can be used to override the logic in pci_scan_bus for skipping - * already-configured bus numbers - to be used for buggy BIOSes or - * architectures with incomplete PCI setup by the loader */ - -#ifdef CONFIG_PCI -#define pcibios_assign_all_busses() 1 -extern void unit_pci_init(void); -#else -#define pcibios_assign_all_busses() 0 -#endif - -#define PCIBIOS_MIN_IO 0xBE000004 -#define PCIBIOS_MIN_MEM 0xB8000000 - -/* Dynamic DMA mapping stuff. - * i386 has everything mapped statically. - */ - -#include -#include -#include -#include -#include - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -/* Return the index of the PCI controller for device. */ -static inline int pci_controller_num(struct pci_dev *dev) -{ - return 0; -} - -#define HAVE_PCI_MMAP -#define ARCH_GENERIC_PCI_MMAP_RESOURCE - -#endif /* __KERNEL__ */ - -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - return channel ? 15 : 14; -} - -#include - -#endif /* _ASM_PCI_H */ diff --git a/arch/mn10300/include/asm/percpu.h b/arch/mn10300/include/asm/percpu.h deleted file mode 100644 index 06a959d67234..000000000000 --- a/arch/mn10300/include/asm/percpu.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h deleted file mode 100644 index 0f25d5fa86f3..000000000000 --- a/arch/mn10300/include/asm/pgalloc.h +++ /dev/null @@ -1,56 +0,0 @@ -/* MN10300 Page and page table/directory allocation - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PGALLOC_H -#define _ASM_PGALLOC_H - -#include -#include -#include /* for struct page */ - -struct mm_struct; -struct page; - -/* attach a page table to a PMD entry */ -#define pmd_populate_kernel(mm, pmd, pte) \ - set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE)) - -static inline -void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte) -{ - set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE)); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * Allocate and free page tables. - */ - -extern pgd_t *pgd_alloc(struct mm_struct *); -extern void pgd_free(struct mm_struct *, pgd_t *); - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); -extern struct page *pte_alloc_one(struct mm_struct *, unsigned long); - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long) pte); -} - -static inline void pte_free(struct mm_struct *mm, struct page *pte) -{ - pgtable_page_dtor(pte); - __free_page(pte); -} - - -#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte)) - -#endif /* _ASM_PGALLOC_H */ diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h deleted file mode 100644 index 96d3f9deb59c..000000000000 --- a/arch/mn10300/include/asm/pgtable.h +++ /dev/null @@ -1,494 +0,0 @@ -/* MN10300 Page table manipulators and constants - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * - * The Linux memory management assumes a three-level page table setup. On - * the i386, we use that, but "fold" the mid level into the top-level page - * table, so that we physically have the same two-level page table as the - * i386 mmu expects. - * - * This file contains the functions and defines necessary to modify and use - * the i386 page table tree for the purposes of the MN10300 TLB handler - * functions. - */ -#ifndef _ASM_PGTABLE_H -#define _ASM_PGTABLE_H - -#include - -#ifndef __ASSEMBLY__ -#include -#include -#include - -#include - -#include -#include -#include - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) -extern unsigned long empty_zero_page[1024]; -extern spinlock_t pgd_lock; -extern struct page *pgd_list; - -extern void pmd_ctor(void *, struct kmem_cache *, unsigned long); -extern void pgtable_cache_init(void); -extern void paging_init(void); - -#endif /* !__ASSEMBLY__ */ - -/* - * The Linux mn10300 paging architecture only implements both the traditional - * 2-level page tables - */ -#define PGDIR_SHIFT 22 -#define PTRS_PER_PGD 1024 -#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */ -#define __PAGETABLE_PUD_FOLDED -#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */ -#define __PAGETABLE_PMD_FOLDED -#define PTRS_PER_PTE 1024 - -#define PGD_SIZE PAGE_SIZE -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE - 1)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0UL - -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) - -#define TWOLEVEL_PGDIR_SHIFT 22 -#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) -#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS) - -#ifndef __ASSEMBLY__ -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -#endif - -/* - * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM - * area has to be in the lower half of the virtual address range (the upper - * half is not translated through the TLB). - * - * So in this case, the vmalloc area goes at the bottom of the address map - * (leaving a hole at the very bottom to catch addressing errors), and - * userspace starts immediately above. - * - * The vmalloc() routines also leaves a hole of 4kB between each vmalloced - * area to catch addressing errors. - */ -#ifndef __ASSEMBLY__ -#define VMALLOC_OFFSET (8UL * 1024 * 1024) -#define VMALLOC_START (0x70000000UL) -#define VMALLOC_END (0x7C000000UL) -#else -#define VMALLOC_OFFSET (8 * 1024 * 1024) -#define VMALLOC_START (0x70000000) -#define VMALLOC_END (0x7C000000) -#endif - -#ifndef __ASSEMBLY__ -extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; -#endif - -/* IPTEL2/DPTEL2 bit assignments */ -#define _PAGE_BIT_VALID xPTEL2_V_BIT -#define _PAGE_BIT_CACHE xPTEL2_C_BIT -#define _PAGE_BIT_PRESENT xPTEL2_PV_BIT -#define _PAGE_BIT_DIRTY xPTEL2_D_BIT -#define _PAGE_BIT_GLOBAL xPTEL2_G_BIT -#define _PAGE_BIT_ACCESSED xPTEL2_UNUSED1_BIT /* mustn't be loaded into IPTEL2/DPTEL2 */ - -#define _PAGE_VALID xPTEL2_V -#define _PAGE_CACHE xPTEL2_C -#define _PAGE_PRESENT xPTEL2_PV -#define _PAGE_DIRTY xPTEL2_D -#define _PAGE_PROT xPTEL2_PR -#define _PAGE_PROT_RKNU xPTEL2_PR_ROK -#define _PAGE_PROT_WKNU xPTEL2_PR_RWK -#define _PAGE_PROT_RKRU xPTEL2_PR_ROK_ROU -#define _PAGE_PROT_WKRU xPTEL2_PR_RWK_ROU -#define _PAGE_PROT_WKWU xPTEL2_PR_RWK_RWU -#define _PAGE_GLOBAL xPTEL2_G -#define _PAGE_PS_MASK xPTEL2_PS -#define _PAGE_PS_4Kb xPTEL2_PS_4Kb -#define _PAGE_PS_128Kb xPTEL2_PS_128Kb -#define _PAGE_PS_1Kb xPTEL2_PS_1Kb -#define _PAGE_PS_4Mb xPTEL2_PS_4Mb -#define _PAGE_PSE xPTEL2_PS_4Mb /* 4MB page */ -#define _PAGE_CACHE_WT xPTEL2_CWT -#define _PAGE_ACCESSED xPTEL2_UNUSED1 -#define _PAGE_NX 0 /* no-execute bit */ - -/* If _PAGE_VALID is clear, we use these: */ -#define _PAGE_PROTNONE 0x000 /* If not present */ - -#define __PAGE_PROT_UWAUX 0x010 -#define __PAGE_PROT_USER 0x020 -#define __PAGE_PROT_WRITE 0x040 - -#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID) - -#ifndef __ASSEMBLY__ - -#define VMALLOC_VMADDR(x) ((unsigned long)(x)) - -#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) - -#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX) -#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX) -#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX) -#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX) -#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED) -#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY) -#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY) -#define PAGE_COPY PAGE_COPY_NOEXEC -#define PAGE_READONLY PAGE_READONLY_NOEXEC -#define PAGE_SHARED PAGE_SHARED_EXEC - -#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL) - -#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX) -#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX) -#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX) -#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX) -#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE) -#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) - -#define PAGE_KERNEL __pgprot(__PAGE_KERNEL) -#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO) -#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC) -#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE) -#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) -#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) - -#define __PAGE_USERIO (__PAGE_KERNEL_BASE | _PAGE_PROT_WKWU | _PAGE_NX) -#define PAGE_USERIO __pgprot(__PAGE_USERIO) - -/* - * Whilst the MN10300 can do page protection for execute (given separate data - * and insn TLBs), we are not supporting it at the moment. Write permission, - * however, always implies read permission (but not execute permission). - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY_NOEXEC -#define __P010 PAGE_COPY_NOEXEC -#define __P011 PAGE_COPY_NOEXEC -#define __P100 PAGE_READONLY_EXEC -#define __P101 PAGE_READONLY_EXEC -#define __P110 PAGE_COPY_EXEC -#define __P111 PAGE_COPY_EXEC - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY_NOEXEC -#define __S010 PAGE_SHARED_NOEXEC -#define __S011 PAGE_SHARED_NOEXEC -#define __S100 PAGE_READONLY_EXEC -#define __S101 PAGE_READONLY_EXEC -#define __S110 PAGE_SHARED_EXEC -#define __S111 PAGE_SHARED_EXEC - -/* - * Define this to warn about kernel memory accesses that are - * done without a 'verify_area(VERIFY_WRITE,..)' - */ -#undef TEST_VERIFY_AREA - -#define pte_present(x) (pte_val(x) & _PAGE_VALID) -#define pte_clear(mm, addr, xp) \ -do { \ - set_pte_at((mm), (addr), (xp), __pte(0)); \ -} while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (!pmd_none(x)) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) 0 - - -#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) - -#ifndef __ASSEMBLY__ - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } -static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; } -static inline int pte_special(pte_t pte){ return 0; } - -static inline pte_t pte_rdprotect(pte_t pte) -{ - pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte; -} -static inline pte_t pte_exprotect(pte_t pte) -{ - pte_val(pte) |= _PAGE_NX; return pte; -} - -static inline pte_t pte_wrprotect(pte_t pte) -{ - pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte; -} - -static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } -static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; } - -static inline pte_t pte_mkread(pte_t pte) -{ - pte_val(pte) |= __PAGE_PROT_USER; - if (pte_write(pte)) - pte_val(pte) |= __PAGE_PROT_UWAUX; - return pte; -} -static inline pte_t pte_mkwrite(pte_t pte) -{ - pte_val(pte) |= __PAGE_PROT_WRITE; - if (pte_val(pte) & __PAGE_PROT_USER) - pte_val(pte) |= __PAGE_PROT_UWAUX; - return pte; -} - -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -#define pte_ERROR(e) \ - printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ - __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ - __FILE__, __LINE__, pgd_val(e)) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -#define pgd_clear(xp) do { } while (0) - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval)) -#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval)) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -#define ptep_get_and_clear(mm, addr, ptep) \ - __pte(xchg(&(ptep)->pte, 0)) -#define pte_same(a, b) (pte_val(a) == pte_val(b)) -#define pte_page(x) pfn_to_page(pte_pfn(x)) -#define pte_none(x) (!pte_val(x)) -#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT)) -#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot)) - -/* - * All present user pages are user-executable: - */ -static inline int pte_exec(pte_t pte) -{ - return pte_user(pte); -} - -/* - * All present pages are kernel-executable: - */ -static inline int pte_exec_kernel(pte_t pte) -{ - return 1; -} - -/* Encode and de-code a swap entry */ -#define __swp_type(x) (((x).val >> 1) & 0x3f) -#define __swp_offset(x) ((x).val >> 7) -#define __swp_entry(type, offset) \ - ((swp_entry_t) { ((type) << 1) | ((offset) << 7) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) __pte((x).val) - -static inline -int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep) -{ - if (!pte_dirty(*ptep)) - return 0; - return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte); -} - -static inline -int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep) -{ - if (!pte_young(*ptep)) - return 0; - return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte); -} - -static inline -void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); -} - -static inline void ptep_mkdirty(pte_t *ptep) -{ - set_bit(_PAGE_BIT_DIRTY, &ptep->pte); -} - -/* - * Macro to mark a page protection value as "uncacheable". On processors which - * do not support it, this is a no-op. - */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHE) - -/* - * Macro to mark a page protection value as "Write-Through". - * On processors which do not support it, this is a no-op. - */ -#define pgprot_through(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE_WT) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) -#define mk_pte_huge(entry) \ - ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) &= _PAGE_CHG_MASK; - pte_val(pte) |= pgprot_val(newprot); - return pte; -} - -#define page_pte(page) page_pte_prot((page), __pgprot(0)) - -#define pmd_page_kernel(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) - -#define pmd_large(pmd) \ - ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \ - (_PAGE_PSE | _PAGE_PRESENT)) - -/* - * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD] - * - * this macro returns the index of the entry in the pgd page which would - * control the given virtual address - */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) - -/* - * pgd_offset() returns a (pgd_t *) - * pgd_index() is used get the offset into the pgd page's array of pgd_t's; - */ -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* - * a shortcut which implies the use of the kernel's pgd, instead - * of a process's - */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD] - * - * this macro returns the index of the entry in the pmd page which would - * control the given virtual address - */ -#define pmd_index(address) \ - (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) - -/* - * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] - * - * this macro returns the index of the entry in the pte page which would - * control the given virtual address - */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address)) - -/* - * Make a given kernel text page executable/non-executable. - * Returns the previous executability setting of that page (which - * is used to restore the previous state). Used by the SMP bootup code. - * NOTE: this is an __init function for security reasons. - */ -static inline int set_kernel_exec(unsigned long vaddr, int enable) -{ - return 0; -} - -#define pte_offset_map(dir, address) \ - ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address)) -#define pte_unmap(pte) do {} while (0) - -/* - * The MN10300 has external MMU info in the form of a TLB: this is adapted from - * the kernel page tables containing the necessary information by tlb-mn10300.S - */ -extern void update_mmu_cache(struct vm_area_struct *vma, - unsigned long address, pte_t *ptep); - -#endif /* !__ASSEMBLY__ */ - -#define kern_addr_valid(addr) (1) - -#define MK_IOSPACE_PFN(space, pfn) (pfn) -#define GET_IOSPACE(pfn) 0 -#define GET_PFN(pfn) (pfn) - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTEP_MKDIRTY -#define __HAVE_ARCH_PTE_SAME -#include - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_PGTABLE_H */ diff --git a/arch/mn10300/include/asm/pio-regs.h b/arch/mn10300/include/asm/pio-regs.h deleted file mode 100644 index 96bc8182d0ba..000000000000 --- a/arch/mn10300/include/asm/pio-regs.h +++ /dev/null @@ -1,233 +0,0 @@ -/* MN10300 On-board I/O port module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PIO_REGS_H -#define _ASM_PIO_REGS_H - -#include -#include - -#ifdef __KERNEL__ - -/* I/O port 0 */ -#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */ -#define P0MD_0 0x0003 /* mask */ -#define P0MD_0_IN 0x0000 /* input mode */ -#define P0MD_0_OUT 0x0001 /* output mode */ -#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */ -#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */ -#define P0MD_1 0x000c -#define P0MD_1_IN 0x0000 -#define P0MD_1_OUT 0x0004 -#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */ -#define P0MD_1_EYED 0x000c /* test signal output (data) */ -#define P0MD_2 0x0030 -#define P0MD_2_IN 0x0000 -#define P0MD_2_OUT 0x0010 -#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */ -#define P0MD_3 0x00c0 -#define P0MD_3_IN 0x0000 -#define P0MD_3_OUT 0x0040 -#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */ -#define P0MD_4 0x0300 -#define P0MD_4_IN 0x0000 -#define P0MD_4_OUT 0x0100 -#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */ -#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */ -#define P0MD_5 0x0c00 -#define P0MD_5_IN 0x0000 -#define P0MD_5_OUT 0x0400 -#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */ -#define P0MD_6 0x3000 -#define P0MD_6_IN 0x0000 -#define P0MD_6_OUT 0x1000 -#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */ -#define P0MD_7 0xc000 -#define P0MD_7_IN 0x0000 -#define P0MD_7_OUT 0x4000 -#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */ - -#define P0IN __SYSREG(0xdb000004, u8) /* in reg */ -#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */ - -#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */ -#define P0TMIO_TM0_IN 0x00 -#define P0TMIO_TM0_OUT 0x01 -#define P0TMIO_TM1_IN 0x00 -#define P0TMIO_TM1_OUT 0x02 -#define P0TMIO_TM2_IN 0x00 -#define P0TMIO_TM2_OUT 0x04 -#define P0TMIO_TM3_IN 0x00 -#define P0TMIO_TM3_OUT 0x08 -#define P0TMIO_TM4_IN 0x00 -#define P0TMIO_TM4_OUT 0x10 -#define P0TMIO_TM5_IN 0x00 -#define P0TMIO_TM5_OUT 0x20 -#define P0TMIO_TM6A_IN 0x00 -#define P0TMIO_TM6A_OUT 0x40 -#define P0TMIO_TM6B_IN 0x00 -#define P0TMIO_TM6B_OUT 0x80 - -/* I/O port 1 */ -#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */ -#define P1MD_0 0x0003 /* mask */ -#define P1MD_0_IN 0x0000 /* input mode */ -#define P1MD_0_OUT 0x0001 /* output mode */ -#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */ -#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */ -#define P1MD_1 0x000c -#define P1MD_1_IN 0x0000 -#define P1MD_1_OUT 0x0004 -#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */ -#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */ -#define P1MD_2 0x0030 -#define P1MD_2_IN 0x0000 -#define P1MD_2_OUT 0x0010 -#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */ -#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */ -#define P1MD_3 0x00c0 -#define P1MD_3_IN 0x0000 -#define P1MD_3_OUT 0x0040 -#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */ -#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */ -#define P1MD_4 0x0300 -#define P1MD_4_IN 0x0000 -#define P1MD_4_OUT 0x0100 -#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */ -#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */ - -#define P1IN __SYSREG(0xdb000104, u8) /* in reg */ -#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */ -#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */ -#define P1TMIO_TM11_IN 0x00 -#define P1TMIO_TM11_OUT 0x01 -#define P1TMIO_TM10_IN 0x00 -#define P1TMIO_TM10_OUT 0x02 -#define P1TMIO_TM9_IN 0x00 -#define P1TMIO_TM9_OUT 0x04 -#define P1TMIO_TM8_IN 0x00 -#define P1TMIO_TM8_OUT 0x08 -#define P1TMIO_TM7_IN 0x00 -#define P1TMIO_TM7_OUT 0x10 - -/* I/O port 2 */ -#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */ -#define P2MD_0 0x0003 /* mask */ -#define P2MD_0_IN 0x0000 /* input mode */ -#define P2MD_0_OUT 0x0001 /* output mode */ -#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */ -#define P2MD_1 0x000c -#define P2MD_1_IN 0x0000 -#define P2MD_1_OUT 0x0004 -#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */ -#define P2MD_2 0x0030 -#define P2MD_2_IN 0x0000 -#define P2MD_2_OUT 0x0010 -#define P2MD_3 0x00c0 -#define P2MD_3_IN 0x0000 -#define P2MD_3_OUT 0x0040 -#define P2MD_3_CKIO 0x00c0 /* mode */ -#define P2MD_4 0x0300 -#define P2MD_4_IN 0x0000 -#define P2MD_4_OUT 0x0100 -#define P2MD_4_CMOD 0x0300 /* mode */ - -#define P2IN __SYSREG(0xdb000204, u8) /* in reg */ -#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */ -#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */ - -/* I/O port 3 */ -#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */ -#define P3MD_0 0x0003 /* mask */ -#define P3MD_0_IN 0x0000 /* input mode */ -#define P3MD_0_OUT 0x0001 /* output mode */ -#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */ -#define P3MD_1 0x000c -#define P3MD_1_IN 0x0000 -#define P3MD_1_OUT 0x0004 -#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */ -#define P3MD_2 0x0030 -#define P3MD_2_IN 0x0000 -#define P3MD_2_OUT 0x0010 -#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */ -#define P3MD_3 0x00c0 -#define P3MD_3_IN 0x0000 -#define P3MD_3_OUT 0x0040 -#define P3MD_3_AFFS 0x0080 /* AFR interface mode */ -#define P3MD_4 0x0300 -#define P3MD_4_IN 0x0000 -#define P3MD_4_OUT 0x0100 -#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */ - -#define P3IN __SYSREG(0xdb000304, u8) /* in reg */ -#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */ - -/* I/O port 4 */ -#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */ -#define P4MD_0 0x0003 /* mask */ -#define P4MD_0_IN 0x0000 /* input mode */ -#define P4MD_0_OUT 0x0001 /* output mode */ -#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */ -#define P4MD_1 0x000c -#define P4MD_1_IN 0x0000 -#define P4MD_1_OUT 0x0004 -#define P4MD_1_SDA0 0x0008 -#define P4MD_2 0x0030 -#define P4MD_2_IN 0x0000 -#define P4MD_2_OUT 0x0010 -#define P4MD_2_SCL1 0x0020 -#define P4MD_3 0x00c0 -#define P4MD_3_IN 0x0000 -#define P4MD_3_OUT 0x0040 -#define P4MD_3_SDA1 0x0080 -#define P4MD_4 0x0300 -#define P4MD_4_IN 0x0000 -#define P4MD_4_OUT 0x0100 -#define P4MD_4_SBO0 0x0200 -#define P4MD_5 0x0c00 -#define P4MD_5_IN 0x0000 -#define P4MD_5_OUT 0x0400 -#define P4MD_5_SBO1 0x0800 -#define P4MD_6 0x3000 -#define P4MD_6_IN 0x0000 -#define P4MD_6_OUT 0x1000 -#define P4MD_6_SBT0 0x2000 -#define P4MD_7 0xc000 -#define P4MD_7_IN 0x0000 -#define P4MD_7_OUT 0x4000 -#define P4MD_7_SBT1 0x8000 - -#define P4IN __SYSREG(0xdb000404, u8) /* in reg */ -#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */ - -/* I/O port 5 */ -#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */ -#define P5MD_0 0x0003 /* mask */ -#define P5MD_0_IN 0x0000 /* input mode */ -#define P5MD_0_OUT 0x0001 /* output mode */ -#define P5MD_0_IRTXD 0x0002 /* IrDA mode */ -#define P5MD_0_SOUT 0x0004 /* serial mode */ -#define P5MD_1 0x000c -#define P5MD_1_IN 0x0000 -#define P5MD_1_OUT 0x0004 -#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */ -#define P5MD_1_SIN 0x000c /* serial mode */ -#define P5MD_2 0x0030 -#define P5MD_2_IN 0x0000 -#define P5MD_2_OUT 0x0010 -#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */ - -#define P5IN __SYSREG(0xdb000504, u8) /* in reg */ -#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */ - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PIO_REGS_H */ diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h deleted file mode 100644 index 3ae479117b42..000000000000 --- a/arch/mn10300/include/asm/processor.h +++ /dev/null @@ -1,171 +0,0 @@ -/* MN10300 Processor specifics - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROCESSOR_H -#define _ASM_PROCESSOR_H - -#include -#include -#include -#include -#include -#include - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() \ -({ \ - void *__pc; \ - asm("mov pc,%0" : "=a"(__pc)); \ - __pc; \ -}) - -extern void get_mem_info(unsigned long *mem_base, unsigned long *mem_size); - -extern void show_registers(struct pt_regs *regs); - -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * Members of this structure are referenced in head.S, so think twice - * before touching them. [mj] - */ - -struct mn10300_cpuinfo { - int type; - unsigned long loops_per_jiffy; - char hard_math; -}; - -extern struct mn10300_cpuinfo boot_cpu_data; - -#ifdef CONFIG_SMP -#if CONFIG_NR_CPUS < 2 || CONFIG_NR_CPUS > 8 -# error Sorry, NR_CPUS should be 2 to 8 -#endif -extern struct mn10300_cpuinfo cpu_data[]; -#define current_cpu_data cpu_data[smp_processor_id()] -#else /* CONFIG_SMP */ -#define cpu_data &boot_cpu_data -#define current_cpu_data boot_cpu_data -#endif /* CONFIG_SMP */ - -extern void identify_cpu(struct mn10300_cpuinfo *); -extern void print_cpu_info(struct mn10300_cpuinfo *); -extern void dodgy_tsc(void); - -#define cpu_relax() barrier() - -/* - * User space process size: 1.75GB (default). - */ -#define TASK_SIZE 0x70000000 - -/* - * Where to put the userspace stack by default - */ -#define STACK_TOP 0x70000000 -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE 0x30000000 - -struct fpu_state_struct { - unsigned long fs[32]; /* fpu registers */ - unsigned long fpcr; /* fpu control register */ -}; - -struct thread_struct { - struct pt_regs *uregs; /* userspace register frame */ - unsigned long pc; /* kernel PC */ - unsigned long sp; /* kernel SP */ - unsigned long a3; /* kernel FP */ - unsigned long wchan; - unsigned long usp; - unsigned long fpu_flags; -#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ -#define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */ - struct fpu_state_struct fpu_state; -}; - -#define INIT_THREAD \ -{ \ - .uregs = init_uregs, \ - .pc = 0, \ - .sp = 0, \ - .a3 = 0, \ - .wchan = 0, \ -} - -#define INIT_MMAP \ -{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \ - NULL, NULL } - -/* - * do necessary setup to start up a newly executed thread - */ -static inline void start_thread(struct pt_regs *regs, - unsigned long new_pc, unsigned long new_sp) -{ - regs->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; - regs->pc = new_pc; - regs->sp = new_sp; -} - - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -unsigned long get_wchan(struct task_struct *p); - -#define task_pt_regs(task) ((task)->thread.uregs) -#define KSTK_EIP(task) (task_pt_regs(task)->pc) -#define KSTK_ESP(task) (task_pt_regs(task)->sp) - -#define KSTK_TOP(info) \ -({ \ - (unsigned long)(info) + THREAD_SIZE; \ -}) - -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW - -static inline void prefetch(const void *x) -{ -#ifdef CONFIG_MN10300_CACHE_ENABLED -#ifdef CONFIG_MN10300_PROC_MN103E010 - asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); -#else - asm volatile ("dcpf (%0)" : : "r"(x)); -#endif -#endif -} - -static inline void prefetchw(const void *x) -{ -#ifdef CONFIG_MN10300_CACHE_ENABLED -#ifdef CONFIG_MN10300_PROC_MN103E010 - asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); -#else - asm volatile ("dcpf (%0)" : : "r"(x)); -#endif -#endif -} - -#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h deleted file mode 100644 index 838a3830010e..000000000000 --- a/arch/mn10300/include/asm/ptrace.h +++ /dev/null @@ -1,26 +0,0 @@ -/* MN10300 Exception frame layout and ptrace constants - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PTRACE_H -#define _ASM_PTRACE_H - -#include - - -#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) -#define instruction_pointer(regs) ((regs)->pc) -#define user_stack_pointer(regs) ((regs)->sp) -#define current_pt_regs() current_frame() - -#define arch_has_single_step() (1) - -#define profile_pc(regs) ((regs)->pc) - -#endif /* _ASM_PTRACE_H */ diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h deleted file mode 100644 index 8ca2a42d365b..000000000000 --- a/arch/mn10300/include/asm/reset-regs.h +++ /dev/null @@ -1,60 +0,0 @@ -/* MN10300 Reset controller and watchdog timer definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_RESET_REGS_H -#define _ASM_RESET_REGS_H - -#include -#include - -#ifdef __KERNEL__ - -/* - * watchdog timer registers - */ -#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */ - -#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */ -#define WDCTR_WDCK 0x07 /* clock source selection */ -#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */ -#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */ -#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */ -#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */ -#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */ -#define WDCTR_WDRST 0x40 /* binary counter reset */ -#define WDCTR_WDCNE 0x80 /* watchdog timer enable */ - -#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */ -#define RSTCTR_CHIPRST 0x01 /* chip reset */ -#define RSTCTR_DBFRST 0x02 /* double fault reset flag */ -#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */ -#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */ - -#ifndef __ASSEMBLY__ - -static inline void mn10300_proc_hard_reset(void) -{ - RSTCTR &= ~RSTCTR_CHIPRST; - RSTCTR |= RSTCTR_CHIPRST; -} - -extern unsigned int watchdog_alert_counter[]; - -extern void watchdog_go(void); -extern asmlinkage void watchdog_handler(void); -extern asmlinkage -void watchdog_interrupt(struct pt_regs *, enum exception_code); - -#endif - -#endif /* __KERNEL__ */ - -#endif /* _ASM_RESET_REGS_H */ diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h deleted file mode 100644 index c81cacecb6e3..000000000000 --- a/arch/mn10300/include/asm/rtc-regs.h +++ /dev/null @@ -1,86 +0,0 @@ -/* MN10300 on-chip Real-Time Clock registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_RTC_REGS_H -#define _ASM_RTC_REGS_H - -#include - -#ifdef __KERNEL__ - -#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */ -#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */ -#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */ -#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */ -#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */ -#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */ -#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */ -#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */ -#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */ -#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */ - -#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */ -#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */ -#define RTCRA_RS_NONE 0x00 /* - off */ -#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */ -#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */ -#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */ -#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */ -#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */ -#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */ -#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */ -#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */ -#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */ -#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */ -#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */ -#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */ -#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */ -#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */ -#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */ -#define RTCRA_DVR 0x40 /* divider reset */ -#define RTCRA_UIP 0x80 /* clock update flag */ - -#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */ -#define RTCRB_DSE 0x01 /* daylight savings time enable */ -#define RTCRB_TM 0x02 /* time format */ -#define RTCRB_TM_12HR 0x00 /* - 12 hour format */ -#define RTCRB_TM_24HR 0x02 /* - 24 hour format */ -#define RTCRB_DM 0x04 /* numeric value format */ -#define RTCRB_DM_BCD 0x00 /* - BCD */ -#define RTCRB_DM_BINARY 0x04 /* - binary */ -#define RTCRB_UIE 0x10 /* update interrupt disable */ -#define RTCRB_AIE 0x20 /* alarm interrupt disable */ -#define RTCRB_PIE 0x40 /* periodic interrupt disable */ -#define RTCRB_SET 0x80 /* clock update enable */ - -#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */ -#define RTSRC_UF 0x10 /* update end interrupt flag */ -#define RTSRC_AF 0x20 /* alarm interrupt flag */ -#define RTSRC_PF 0x40 /* periodic interrupt flag */ -#define RTSRC_IRQF 0x80 /* interrupt flag */ - -#define RTIRQ 32 -#define RTICR GxICR(RTIRQ) - -/* - * MC146818 RTC compatibility defs for the MN10300 on-chip RTC - */ -#define RTC_PORT(x) 0xd8600000 -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ - -#define CMOS_READ(addr) __SYSREG(0xd8600000 + (u32)(addr), u8) -#define CMOS_WRITE(val, addr) \ - do { __SYSREG(0xd8600000 + (u32)(addr), u8) = val; } while (0) - -#define RTC_IRQ RTIRQ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_RTC_REGS_H */ diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h deleted file mode 100644 index 07dc87656197..000000000000 --- a/arch/mn10300/include/asm/rtc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* MN10300 Real time clock definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_RTC_H -#define _ASM_RTC_H - -#ifdef CONFIG_MN10300_RTC - -#include - -extern void __init calibrate_clock(void); - -#else /* !CONFIG_MN10300_RTC */ - -static inline void calibrate_clock(void) -{ -} - -#endif /* !CONFIG_MN10300_RTC */ - -#endif /* _ASM_RTC_H */ diff --git a/arch/mn10300/include/asm/rwlock.h b/arch/mn10300/include/asm/rwlock.h deleted file mode 100644 index 6d594d4a0e10..000000000000 --- a/arch/mn10300/include/asm/rwlock.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Helpers used by both rw spinlocks and rw semaphores. - * - * Based in part on code from semaphore.h and - * spinlock.h Copyright 1996 Linus Torvalds. - * - * Copyright 1999 Red Hat, Inc. - * - * Written by Benjamin LaHaise. - * - * Modified by Matsushita Electric Industrial Co., Ltd. - * Modifications: - * 13-Nov-2006 MEI Temporarily delete lock functions for SMP support. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ -#ifndef _ASM_RWLOCK_H -#define _ASM_RWLOCK_H - -#define RW_LOCK_BIAS 0x01000000 - -#ifndef CONFIG_SMP - -typedef struct { unsigned long a[100]; } __dummy_lock_t; -#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock)) - -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __build_read_lock_ptr(rw, helper) \ - do { \ - asm volatile( \ - " mov (%0),d3 \n" \ - " sub 1,d3 \n" \ - " mov d3,(%0) \n" \ - " blt 1f \n" \ - " bra 2f \n" \ - "1: jmp 3f \n" \ - "2: \n" \ - " .section .text.lock,\"ax\" \n" \ - "3: call "helper"[],0 \n" \ - " jmp 2b \n" \ - " .previous" \ - : \ - : "d" (rw) \ - : "memory", "d3", "cc"); \ - } while (0) - -#define __build_read_lock_const(rw, helper) \ - do { \ - asm volatile( \ - " mov (%0),d3 \n" \ - " sub 1,d3 \n" \ - " mov d3,(%0) \n" \ - " blt 1f \n" \ - " bra 2f \n" \ - "1: jmp 3f \n" \ - "2: \n" \ - " .section .text.lock,\"ax\" \n" \ - "3: call "helper"[],0 \n" \ - " jmp 2b \n" \ - " .previous" \ - : \ - : "d" (rw) \ - : "memory", "d3", "cc"); \ - } while (0) - -#define __build_read_lock(rw, helper) \ - do { \ - if (__builtin_constant_p(rw)) \ - __build_read_lock_const(rw, helper); \ - else \ - __build_read_lock_ptr(rw, helper); \ - } while (0) - -#define __build_write_lock_ptr(rw, helper) \ - do { \ - asm volatile( \ - " mov (%0),d3 \n" \ - " sub 1,d3 \n" \ - " mov d3,(%0) \n" \ - " blt 1f \n" \ - " bra 2f \n" \ - "1: jmp 3f \n" \ - "2: \n" \ - " .section .text.lock,\"ax\" \n" \ - "3: call "helper"[],0 \n" \ - " jmp 2b \n" \ - " .previous" \ - : \ - : "d" (rw) \ - : "memory", "d3", "cc"); \ - } while (0) - -#define __build_write_lock_const(rw, helper) \ - do { \ - asm volatile( \ - " mov (%0),d3 \n" \ - " sub 1,d3 \n" \ - " mov d3,(%0) \n" \ - " blt 1f \n" \ - " bra 2f \n" \ - "1: jmp 3f \n" \ - "2: \n" \ - " .section .text.lock,\"ax\" \n" \ - "3: call "helper"[],0 \n" \ - " jmp 2b \n" \ - " .previous" \ - : \ - : "d" (rw) \ - : "memory", "d3", "cc"); \ - } while (0) - -#define __build_write_lock(rw, helper) \ - do { \ - if (__builtin_constant_p(rw)) \ - __build_write_lock_const(rw, helper); \ - else \ - __build_write_lock_ptr(rw, helper); \ - } while (0) - -#endif /* CONFIG_SMP */ -#endif /* _ASM_RWLOCK_H */ diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h deleted file mode 100644 index 8320cda32f5a..000000000000 --- a/arch/mn10300/include/asm/serial-regs.h +++ /dev/null @@ -1,191 +0,0 @@ -/* MN10300 on-board serial port module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_SERIAL_REGS_H -#define _ASM_SERIAL_REGS_H - -#include -#include - -#ifdef __KERNEL__ - -/* serial port 0 */ -#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ -#define SC01CTR_CK 0x0007 /* clock source select */ -#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ -#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ -#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ -#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ -#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) -#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ -#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ -#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ -#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ -#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ -#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 1 only) */ -#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ -#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ -#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ -#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ -#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM12UFLOW_8 0x0000 /* - 1/8 timer 12 underflow (serial port 1 only) */ -#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ -#define SC01CTR_STB 0x0008 /* stop bit select */ -#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ -#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ -#define SC01CTR_PB 0x0070 /* parity bit select */ -#define SC01CTR_PB_NONE 0x0000 /* - no parity */ -#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ -#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ -#define SC01CTR_PB_EVEN 0x0060 /* - even parity */ -#define SC01CTR_PB_ODD 0x0070 /* - odd parity */ -#define SC01CTR_CLN 0x0080 /* character length */ -#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ -#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ -#define SC01CTR_TOE 0x0100 /* T input output enable */ -#define SC01CTR_OD 0x0200 /* bit order select */ -#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */ -#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */ -#define SC01CTR_MD 0x0c00 /* mode select */ -#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */ -#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */ -#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */ -#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */ -#define SC01CTR_IIC 0x1000 /* I2C mode select */ -#define SC01CTR_BKE 0x2000 /* break transmit enable */ -#define SC01CTR_RXE 0x4000 /* receive enable */ -#define SC01CTR_TXE 0x8000 /* transmit enable */ - -#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */ -#define SC01ICR_DMD 0x80 /* output data mode */ -#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */ -#define SC01ICR_TI 0x10 /* transmit interrupt cause */ -#define SC01ICR_RES 0x04 /* receive error select */ -#define SC01ICR_RI 0x01 /* receive interrupt cause */ - -#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */ -#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */ - -#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */ -#define SC01STR_OEF 0x0001 /* overrun error found */ -#define SC01STR_PEF 0x0002 /* parity error found */ -#define SC01STR_FEF 0x0004 /* framing error found */ -#define SC01STR_RBF 0x0010 /* receive buffer status */ -#define SC01STR_TBF 0x0020 /* transmit buffer status */ -#define SC01STR_RXF 0x0040 /* receive status */ -#define SC01STR_TXF 0x0080 /* transmit status */ -#define SC01STR_STF 0x0100 /* I2C start sequence found */ -#define SC01STR_SPF 0x0200 /* I2C stop sequence found */ - -#define SC0RXIRQ 20 /* timer 0 Receive IRQ */ -#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */ - -#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */ -#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */ - -/* serial port 1 */ -#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */ -#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */ -#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */ - -#define SC1RXIRQ 22 /* timer 1 Receive IRQ */ -#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */ - -#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */ -#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */ - -/* serial port 2 */ -#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ -#ifdef CONFIG_AM33_2 -#define SC2CTR_CK 0x0003 /* clock source select */ -#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ -#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ -#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ -#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ -#else /* CONFIG_AM33_2 */ -#define SC2CTR_CK 0x0007 /* clock source select */ -#define SC2CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow */ -#define SC2CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ -#define SC2CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ -#define SC2CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow */ -#define SC2CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow */ -#define SC2CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow */ -#define SC2CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ -#define SC2CTR_CK_EXTERN 0x0007 /* - external closk */ -#endif /* CONFIG_AM33_2 */ -#define SC2CTR_STB 0x0008 /* stop bit select */ -#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ -#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ -#define SC2CTR_PB 0x0070 /* parity bit select */ -#define SC2CTR_PB_NONE 0x0000 /* - no parity */ -#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ -#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ -#define SC2CTR_PB_EVEN 0x0060 /* - even parity */ -#define SC2CTR_PB_ODD 0x0070 /* - odd parity */ -#define SC2CTR_CLN 0x0080 /* character length */ -#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ -#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ -#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */ -#define SC2CTR_OD 0x0200 /* bit order select */ -#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */ -#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */ -#define SC2CTR_TWS 0x1000 /* transmit wait select */ -#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */ -#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */ -#define SC2CTR_BKE 0x2000 /* break transmit enable */ -#define SC2CTR_RXE 0x4000 /* receive enable */ -#define SC2CTR_TXE 0x8000 /* transmit enable */ - -#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */ -#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */ -#define SC2ICR_TI 0x10 /* transmit interrupt cause */ -#define SC2ICR_RES 0x04 /* receive error select */ -#define SC2ICR_RI 0x01 /* receive interrupt cause */ - -#define SC2TXB __SYSREG(0xd4002028, u8) /* transmit buffer reg */ -#define SC2RXB __SYSREG(0xd4002029, u8) /* receive buffer reg */ - -#ifdef CONFIG_AM33_2 -#define SC2STR __SYSREG(0xd400202c, u8) /* status reg */ -#else /* CONFIG_AM33_2 */ -#define SC2STR __SYSREG(0xd400202c, u16) /* status reg */ -#endif /* CONFIG_AM33_2 */ -#define SC2STR_OEF 0x0001 /* overrun error found */ -#define SC2STR_PEF 0x0002 /* parity error found */ -#define SC2STR_FEF 0x0004 /* framing error found */ -#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */ -#define SC2STR_RBF 0x0010 /* receive buffer status */ -#define SC2STR_TBF 0x0020 /* transmit buffer status */ -#define SC2STR_RXF 0x0040 /* receive status */ -#define SC2STR_TXF 0x0080 /* transmit status */ - -#ifdef CONFIG_AM33_2 -#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ -#endif - -#ifdef CONFIG_AM33_2 -#define SC2RXIRQ 24 /* serial 2 Receive IRQ */ -#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ -#else /* CONFIG_AM33_2 */ -#define SC2RXIRQ 68 /* serial 2 Receive IRQ */ -#define SC2TXIRQ 69 /* serial 2 Transmit IRQ */ -#endif /* CONFIG_AM33_2 */ - -#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ -#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SERIAL_REGS_H */ diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h deleted file mode 100644 index 594ebff15d3f..000000000000 --- a/arch/mn10300/include/asm/serial.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Standard UART definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_8250_DETECT_IRQ -#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ) -#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ) -#else -#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) -#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF -#endif - -#ifdef CONFIG_SERIAL_8250_MANY_PORTS -#define FOURPORT_FLAGS UPF_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE -#endif - -#include - -#endif /* _ASM_SERIAL_H */ diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h deleted file mode 100644 index fb024555d2a9..000000000000 --- a/arch/mn10300/include/asm/setup.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN10300 Setup declarations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SETUP_H -#define _ASM_SETUP_H - -#include - -extern void __init unit_setup(void); -extern void __init unit_init_IRQ(void); -#endif /* _ASM_SETUP_H */ diff --git a/arch/mn10300/include/asm/shmparam.h b/arch/mn10300/include/asm/shmparam.h deleted file mode 100644 index 3a31faaa4353..000000000000 --- a/arch/mn10300/include/asm/shmparam.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_SHMPARAM_H -#define _ASM_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_SHMPARAM_H */ diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h deleted file mode 100644 index 214ff5e9fe60..000000000000 --- a/arch/mn10300/include/asm/signal.h +++ /dev/null @@ -1,33 +0,0 @@ -/* MN10300 Signal definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SIGNAL_H -#define _ASM_SIGNAL_H - -#include - -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#define __ARCH_HAS_SA_RESTORER - -#include - -#endif /* _ASM_SIGNAL_H */ diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h deleted file mode 100644 index 56c42417d428..000000000000 --- a/arch/mn10300/include/asm/smp.h +++ /dev/null @@ -1,109 +0,0 @@ -/* MN10300 SMP support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * Modified by Matsushita Electric Industrial Co., Ltd. - * Modifications: - * 13-Nov-2006 MEI Define IPI-IRQ number and add inline/macro function - * for SMP support. - * 22-Jan-2007 MEI Add the define related to SMP_BOOT_IRQ. - * 23-Feb-2007 MEI Add the define related to SMP icahce invalidate. - * 23-Jun-2008 MEI Delete INTC_IPI. - * 22-Jul-2008 MEI Add smp_nmi_call_function and related defines. - * 04-Aug-2008 MEI Delete USE_DOIRQ_CACHE_IPI. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SMP_H -#define _ASM_SMP_H - -#ifndef __ASSEMBLY__ -#include -#include -#include -#endif - -#ifdef CONFIG_SMP -#include - -#define RESCHEDULE_IPI 63 -#define CALL_FUNC_SINGLE_IPI 192 -#define LOCAL_TIMER_IPI 193 -#define FLUSH_CACHE_IPI 194 -#define CALL_FUNCTION_NMI_IPI 195 -#define DEBUGGER_NMI_IPI 196 - -#define SMP_BOOT_IRQ 195 - -#define RESCHEDULE_GxICR_LV GxICR_LEVEL_6 -#define CALL_FUNCTION_GxICR_LV GxICR_LEVEL_4 -#define LOCAL_TIMER_GxICR_LV GxICR_LEVEL_4 -#define FLUSH_CACHE_GxICR_LV GxICR_LEVEL_0 -#define SMP_BOOT_GxICR_LV GxICR_LEVEL_0 -#define DEBUGGER_GxICR_LV CONFIG_DEBUGGER_IRQ_LEVEL - -#define TIME_OUT_COUNT_BOOT_IPI 100 -#define DELAY_TIME_BOOT_IPI 75000 - - -#ifndef __ASSEMBLY__ - -/** - * raw_smp_processor_id - Determine the raw CPU ID of the CPU running it - * - * What we really want to do is to use the CPUID hardware CPU register to get - * this information, but accesses to that aren't cached, and run at system bus - * speed, not CPU speed. A copy of this value is, however, stored in the - * thread_info struct, and that can be cached. - * - * An alternate way of dealing with this could be to use the EPSW.S bits to - * cache this information for systems with up to four CPUs. - */ -#define arch_smp_processor_id() (CPUID) -#if 0 -#define raw_smp_processor_id() (arch_smp_processor_id()) -#else -#define raw_smp_processor_id() (current_thread_info()->cpu) -#endif - -static inline int cpu_logical_map(int cpu) -{ - return cpu; -} - -static inline int cpu_number_map(int cpu) -{ - return cpu; -} - - -extern cpumask_t cpu_boot_map; - -extern void smp_init_cpus(void); -extern void smp_cache_interrupt(void); -extern void send_IPI_allbutself(int irq); -extern int smp_nmi_call_function(void (*func)(void *), void *info, int wait); - -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); - -#ifdef CONFIG_HOTPLUG_CPU -extern int __cpu_disable(void); -extern void __cpu_die(unsigned int cpu); -#endif /* CONFIG_HOTPLUG_CPU */ - -#endif /* __ASSEMBLY__ */ -#else /* CONFIG_SMP */ -#ifndef __ASSEMBLY__ - -static inline void smp_init_cpus(void) {} -#define raw_smp_processor_id() 0 - -#endif /* __ASSEMBLY__ */ -#endif /* CONFIG_SMP */ - -#endif /* _ASM_SMP_H */ diff --git a/arch/mn10300/include/asm/smsc911x.h b/arch/mn10300/include/asm/smsc911x.h deleted file mode 100644 index 2fcd1080322b..000000000000 --- a/arch/mn10300/include/asm/smsc911x.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h deleted file mode 100644 index 879cd0df53ba..000000000000 --- a/arch/mn10300/include/asm/spinlock.h +++ /dev/null @@ -1,180 +0,0 @@ -/* MN10300 spinlock support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SPINLOCK_H -#define _ASM_SPINLOCK_H - -#include -#include -#include -#include -#include - -/* - * Simple spin lock operations. There are two variants, one clears IRQ's - * on the local processor, one does not. - * - * We make no fairness assumptions. They have a cost. - */ - -#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0) - -static inline void arch_spin_unlock(arch_spinlock_t *lock) -{ - asm volatile( - " bclr 1,(0,%0) \n" - : - : "a"(&lock->slock) - : "memory", "cc"); -} - -static inline int arch_spin_trylock(arch_spinlock_t *lock) -{ - int ret; - - asm volatile( - " mov 1,%0 \n" - " bset %0,(%1) \n" - " bne 1f \n" - " clr %0 \n" - "1: xor 1,%0 \n" - : "=d"(ret) - : "a"(&lock->slock) - : "memory", "cc"); - - return ret; -} - -static inline void arch_spin_lock(arch_spinlock_t *lock) -{ - asm volatile( - "1: bset 1,(0,%0) \n" - " bne 1b \n" - : - : "a"(&lock->slock) - : "memory", "cc"); -} - -static inline void arch_spin_lock_flags(arch_spinlock_t *lock, - unsigned long flags) -{ - int temp; - - asm volatile( - "1: bset 1,(0,%2) \n" - " beq 3f \n" - " mov %1,epsw \n" - "2: mov (0,%2),%0 \n" - " or %0,%0 \n" - " bne 2b \n" - " mov %3,%0 \n" - " mov %0,epsw \n" - " nop \n" - " nop \n" - " bra 1b\n" - "3: \n" - : "=&d" (temp) - : "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL) - : "memory", "cc"); -} -#define arch_spin_lock_flags arch_spin_lock_flags - -#ifdef __KERNEL__ - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * NOTE! it is quite common to have readers in interrupts - * but no interrupt writers. For those circumstances we - * can "mix" irq-safe locks - any writer needs to get a - * irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - */ - -/* - * On mn10300, we implement read-write locks as a 32-bit counter - * with the high bit (sign) being the "contended" bit. - */ -static inline void arch_read_lock(arch_rwlock_t *rw) -{ -#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT - __build_read_lock(rw, "__read_lock_failed"); -#else - { - atomic_t *count = (atomic_t *)rw; - while (atomic_dec_return(count) < 0) - atomic_inc(count); - } -#endif -} - -static inline void arch_write_lock(arch_rwlock_t *rw) -{ -#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT - __build_write_lock(rw, "__write_lock_failed"); -#else - { - atomic_t *count = (atomic_t *)rw; - while (!atomic_sub_and_test(RW_LOCK_BIAS, count)) - atomic_add(RW_LOCK_BIAS, count); - } -#endif -} - -static inline void arch_read_unlock(arch_rwlock_t *rw) -{ -#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT - __build_read_unlock(rw); -#else - { - atomic_t *count = (atomic_t *)rw; - atomic_inc(count); - } -#endif -} - -static inline void arch_write_unlock(arch_rwlock_t *rw) -{ -#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT - __build_write_unlock(rw); -#else - { - atomic_t *count = (atomic_t *)rw; - atomic_add(RW_LOCK_BIAS, count); - } -#endif -} - -static inline int arch_read_trylock(arch_rwlock_t *lock) -{ - atomic_t *count = (atomic_t *)lock; - atomic_dec(count); - if (atomic_read(count) >= 0) - return 1; - atomic_inc(count); - return 0; -} - -static inline int arch_write_trylock(arch_rwlock_t *lock) -{ - atomic_t *count = (atomic_t *)lock; - if (atomic_sub_and_test(RW_LOCK_BIAS, count)) - return 1; - atomic_add(RW_LOCK_BIAS, count); - return 0; -} - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* __KERNEL__ */ -#endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mn10300/include/asm/spinlock_types.h b/arch/mn10300/include/asm/spinlock_types.h deleted file mode 100644 index 32abdc89bbc7..000000000000 --- a/arch/mn10300/include/asm/spinlock_types.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_SPINLOCK_TYPES_H -#define _ASM_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct arch_spinlock { - unsigned int slock; -} arch_spinlock_t; - -#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - unsigned int lock; -} arch_rwlock_t; - -#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } - -#endif /* _ASM_SPINLOCK_TYPES_H */ diff --git a/arch/mn10300/include/asm/string.h b/arch/mn10300/include/asm/string.h deleted file mode 100644 index 47dbd4346c32..000000000000 --- a/arch/mn10300/include/asm/string.h +++ /dev/null @@ -1,32 +0,0 @@ -/* MN10300 Optimised string functions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_STRING_H -#define _ASM_STRING_H - -#define __HAVE_ARCH_MEMSET -#define __HAVE_ARCH_MEMCPY -#define __HAVE_ARCH_MEMMOVE - -extern void *memset(void *dest, int ch, size_t count); -extern void *memcpy(void *dest, const void *src, size_t count); -extern void *memmove(void *dest, const void *src, size_t count); - - -extern void __struct_cpy_bug(void); -#define struct_cpy(x, y) \ -({ \ - if (sizeof(*(x)) != sizeof(*(y))) \ - __struct_cpy_bug; \ - memcpy(x, y, sizeof(*(x))); \ -}) - -#endif /* _ASM_STRING_H */ diff --git a/arch/mn10300/include/asm/switch_to.h b/arch/mn10300/include/asm/switch_to.h deleted file mode 100644 index 67e333aa7629..000000000000 --- a/arch/mn10300/include/asm/switch_to.h +++ /dev/null @@ -1,49 +0,0 @@ -/* MN10300 task switching definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SWITCH_TO_H -#define _ASM_SWITCH_TO_H - -#include - -struct task_struct; -struct thread_struct; - -#if defined(CONFIG_FPU) && !defined(CONFIG_LAZY_SAVE_FPU) -struct fpu_state_struct; -extern asmlinkage void fpu_save(struct fpu_state_struct *); -#define switch_fpu(prev, next) \ - do { \ - if ((prev)->thread.fpu_flags & THREAD_HAS_FPU) { \ - (prev)->thread.fpu_flags &= ~THREAD_HAS_FPU; \ - (prev)->thread.uregs->epsw &= ~EPSW_FE; \ - fpu_save(&(prev)->thread.fpu_state); \ - } \ - } while (0) -#else -#define switch_fpu(prev, next) do {} while (0) -#endif - -/* context switching is now performed out-of-line in switch_to.S */ -extern asmlinkage -struct task_struct *__switch_to(struct thread_struct *prev, - struct thread_struct *next, - struct task_struct *prev_task); - -#define switch_to(prev, next, last) \ -do { \ - switch_fpu(prev, next); \ - current->thread.wchan = (u_long) __builtin_return_address(0); \ - (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ - mb(); \ - current->thread.wchan = 0; \ -} while (0) - -#endif /* _ASM_SWITCH_TO_H */ diff --git a/arch/mn10300/include/asm/syscall.h b/arch/mn10300/include/asm/syscall.h deleted file mode 100644 index b44b0bb75a01..000000000000 --- a/arch/mn10300/include/asm/syscall.h +++ /dev/null @@ -1,117 +0,0 @@ -/* Access to user system call parameters and results - * - * See asm-generic/syscall.h for function descriptions. - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_SYSCALL_H -#define _ASM_SYSCALL_H - -#include -#include - -extern const unsigned long sys_call_table[]; - -static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs) -{ - return regs->orig_d0; -} - -static inline void syscall_rollback(struct task_struct *task, - struct pt_regs *regs) -{ - regs->d0 = regs->orig_d0; -} - -static inline long syscall_get_error(struct task_struct *task, - struct pt_regs *regs) -{ - unsigned long error = regs->d0; - return IS_ERR_VALUE(error) ? error : 0; -} - -static inline long syscall_get_return_value(struct task_struct *task, - struct pt_regs *regs) -{ - return regs->d0; -} - -static inline void syscall_set_return_value(struct task_struct *task, - struct pt_regs *regs, - int error, long val) -{ - regs->d0 = (long) error ?: val; -} - -static inline void syscall_get_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - unsigned long *args) -{ - switch (i) { - case 0: - if (!n--) break; - *args++ = regs->a0; - case 1: - if (!n--) break; - *args++ = regs->d1; - case 2: - if (!n--) break; - *args++ = regs->a3; - case 3: - if (!n--) break; - *args++ = regs->a2; - case 4: - if (!n--) break; - *args++ = regs->d3; - case 5: - if (!n--) break; - *args++ = regs->d2; - case 6: - if (!n--) break; - default: - BUG(); - break; - } -} - -static inline void syscall_set_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - const unsigned long *args) -{ - switch (i) { - case 0: - if (!n--) break; - regs->a0 = *args++; - case 1: - if (!n--) break; - regs->d1 = *args++; - case 2: - if (!n--) break; - regs->a3 = *args++; - case 3: - if (!n--) break; - regs->a2 = *args++; - case 4: - if (!n--) break; - regs->d3 = *args++; - case 5: - if (!n--) break; - regs->d2 = *args++; - case 6: - if (!n--) break; - default: - BUG(); - break; - } -} - -#endif /* _ASM_SYSCALL_H */ diff --git a/arch/mn10300/include/asm/termios.h b/arch/mn10300/include/asm/termios.h deleted file mode 100644 index 4010edcaa08e..000000000000 --- a/arch/mn10300/include/asm/termios.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_TERMIOS_H -#define _ASM_TERMIOS_H - -#include - -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif /* _ASM_TERMIOS_H */ diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h deleted file mode 100644 index 1748a7b25bf8..000000000000 --- a/arch/mn10300/include/asm/thread_info.h +++ /dev/null @@ -1,160 +0,0 @@ -/* MN10300 Low-level thread information - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include - -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (4096) -#define THREAD_SIZE_ORDER (0) -#else -#define THREAD_SIZE (8192) -#define THREAD_SIZE_ORDER (1) -#endif - -#define STACK_WARN (THREAD_SIZE / 8) - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants - * must also be changed - */ -#ifndef __ASSEMBLY__ -typedef struct { - unsigned long seg; -} mm_segment_t; - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct pt_regs *frame; /* current exception frame */ - unsigned long flags; /* low level flags */ - __u32 cpu; /* current CPU */ - __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ - - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF for user-thead - 0-0xFFFFFFFF for kernel-thread - */ - - __u8 supervisor_stack[0]; -}; - -#define thread_info_to_uregs(ti) \ - ((struct pt_regs *) \ - ((unsigned long)ti + THREAD_SIZE - sizeof(struct pt_regs))) - -#else /* !__ASSEMBLY__ */ - -#ifndef __ASM_OFFSETS_H__ -#include -#endif - -#endif - -/* - * macros/functions for gaining access to the thread information structure - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = INIT_PREEMPT_COUNT, \ - .addr_limit = KERNEL_DS, \ -} - -#define init_uregs \ - ((struct pt_regs *) \ - ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs))) - -extern struct thread_info *__current_ti; - -/* how to get the thread information struct from C */ -static inline __attribute__((const)) -struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - asm("mov sp,%0\n" - "and %1,%0\n" - : "=d" (ti) - : "i" (~(THREAD_SIZE - 1)) - : "cc"); - return ti; -} - -static inline __attribute__((const)) -struct pt_regs *current_frame(void) -{ - return current_thread_info()->frame; -} - -/* how to get the current stack pointer from C */ -static inline unsigned long current_stack_pointer(void) -{ - unsigned long sp; - asm("mov sp,%0; ":"=r" (sp)); - return sp; -} - -#ifndef CONFIG_KGDB -void arch_release_thread_stack(unsigned long *stack); -#endif -#define get_thread_info(ti) get_task_struct((ti)->task) -#define put_thread_info(ti) put_task_struct((ti)->task) - -#else /* !__ASSEMBLY__ */ - -#ifndef __VMLINUX_LDS__ -/* how to get the thread information struct from ASM */ -.macro GET_THREAD_INFO reg - mov sp,\reg - and -THREAD_SIZE,\reg -.endm -#endif -#endif - -/* - * thread information flags - * - these are process state flags that various assembly files may need to - * access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ -#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ -#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ - -#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE) -#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME) -#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP) -#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG) - -#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ -#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h deleted file mode 100644 index c634977caf66..000000000000 --- a/arch/mn10300/include/asm/timer-regs.h +++ /dev/null @@ -1,452 +0,0 @@ -/* AM33v2 on-board timer module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_TIMER_REGS_H -#define _ASM_TIMER_REGS_H - -#include -#include - -#ifdef __KERNEL__ - -/* - * Timer prescalar control - */ -#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ -#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ -#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ - -/* - * 8-bit timers - */ -#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ -#define TM0MD_SRC 0x07 /* timer source */ -#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ -#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ -#endif /* CONFIG_AM33_2 */ -#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */ -#define TM1MD_SRC 0x07 /* timer source */ -#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ -#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ -#endif /* CONFIG_AM33_2 */ -#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */ -#define TM2MD_SRC 0x07 /* timer source */ -#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ -#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#if defined(CONFIG_AM33_2) -#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ -#endif /* CONFIG_AM33_2 */ -#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */ -#define TM3MD_SRC 0x07 /* timer source */ -#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM3MD_SRC_TM2CASCADE 0x03 /* - cascade with timer 2 */ -#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ -#endif /* CONFIG_AM33_2 */ -#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */ - -#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */ -#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */ -#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */ -#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */ -#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */ - -#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */ -#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */ -#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */ -#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */ -#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */ - -#define TM0IRQ 2 /* timer 0 IRQ */ -#define TM1IRQ 3 /* timer 1 IRQ */ -#define TM2IRQ 4 /* timer 2 IRQ */ -#define TM3IRQ 5 /* timer 3 IRQ */ - -#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */ -#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */ -#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ -#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ - -/* - * 16-bit timers 4,5 & 7-15 - */ -#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ -#define TM4MD_SRC 0x07 /* timer source */ -#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ -#endif /* CONFIG_AM33_2 */ -#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */ -#define TM5MD_SRC 0x07 /* timer source */ -#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */ -#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ -#else /* !CONFIG_AM33_2 */ -#define TM5MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#endif /* CONFIG_AM33_2 */ -#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */ -#define TM7MD_SRC 0x07 /* timer source */ -#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ -#endif /* CONFIG_AM33_2 */ -#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */ -#define TM8MD_SRC 0x07 /* timer source */ -#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ -#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ -#else /* !CONFIG_AM33_2 */ -#define TM8MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#endif /* CONFIG_AM33_2 */ -#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */ -#define TM9MD_SRC 0x07 /* timer source */ -#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */ -#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ -#else /* !CONFIG_AM33_2 */ -#define TM9MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#endif /* CONFIG_AM33_2 */ -#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */ -#define TM10MD_SRC 0x07 /* timer source */ -#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */ -#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ -#else /* !CONFIG_AM33_2 */ -#define TM10MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#endif /* CONFIG_AM33_2 */ -#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */ -#define TM11MD_SRC 0x07 /* timer source */ -#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ -#else /* !CONFIG_AM33_2 */ -#define TM11MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#endif /* CONFIG_AM33_2 */ -#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#if defined(CONFIG_AM34_2) -#define TM12MD __SYSREG(0xd4003180, u8) /* timer 11 mode register */ -#define TM12MD_SRC 0x07 /* timer source */ -#define TM12MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM12MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM12MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM12MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM12MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM12MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM12MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#define TM12MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM12MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM13MD __SYSREG(0xd4003182, u8) /* timer 11 mode register */ -#define TM13MD_SRC 0x07 /* timer source */ -#define TM13MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM13MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM13MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM13MD_SRC_TM12CASCADE 0x03 /* - cascade with timer 12 */ -#define TM13MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM13MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM13MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM13MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#define TM13MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM13MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM14MD __SYSREG(0xd4003184, u8) /* timer 11 mode register */ -#define TM14MD_SRC 0x07 /* timer source */ -#define TM14MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM14MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM14MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM14MD_SRC_TM13CASCADE 0x03 /* - cascade with timer 13 */ -#define TM14MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM14MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM14MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM14MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#define TM14MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM14MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM15MD __SYSREG(0xd4003186, u8) /* timer 11 mode register */ -#define TM15MD_SRC 0x07 /* timer source */ -#define TM15MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM15MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM15MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM15MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM15MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM15MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM15MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ -#define TM15MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM15MD_COUNT_ENABLE 0x80 /* timer count enable */ -#endif /* CONFIG_AM34_2 */ - - -#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ -#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ -#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ -#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ -#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ -#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ -#define TM89BR __SYSREG(0xd4003098, u32) /* timer 8:9 base register */ -#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ -#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ -#if defined(CONFIG_AM34_2) -#define TM12BR __SYSREG(0xd4003190, u16) /* timer 12 base register */ -#define TM13BR __SYSREG(0xd4003192, u16) /* timer 13 base register */ -#define TM14BR __SYSREG(0xd4003194, u16) /* timer 14 base register */ -#define TM15BR __SYSREG(0xd4003196, u16) /* timer 15 base register */ -#endif /* CONFIG_AM34_2 */ - -#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ -#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ -#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ -#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ -#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ -#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ -#define TM89BC __SYSREG(0xd40030a8, u32) /* timer 8:9 binary counter */ -#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ -#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ -#if defined(CONFIG_AM34_2) -#define TM12BC __SYSREG(0xd40031a0, u16) /* timer 12 binary counter */ -#define TM13BC __SYSREG(0xd40031a2, u16) /* timer 13 binary counter */ -#define TM14BC __SYSREG(0xd40031a4, u16) /* timer 14 binary counter */ -#define TM15BC __SYSREG(0xd40031a6, u16) /* timer 15 binary counter */ -#endif /* CONFIG_AM34_2 */ - -#define TM4IRQ 6 /* timer 4 IRQ */ -#define TM5IRQ 7 /* timer 5 IRQ */ -#define TM7IRQ 11 /* timer 7 IRQ */ -#define TM8IRQ 12 /* timer 8 IRQ */ -#define TM9IRQ 13 /* timer 9 IRQ */ -#define TM10IRQ 14 /* timer 10 IRQ */ -#define TM11IRQ 15 /* timer 11 IRQ */ -#if defined(CONFIG_AM34_2) -#define TM12IRQ 64 /* timer 12 IRQ */ -#define TM13IRQ 65 /* timer 13 IRQ */ -#define TM14IRQ 66 /* timer 14 IRQ */ -#define TM15IRQ 67 /* timer 15 IRQ */ -#endif /* CONFIG_AM34_2 */ - -#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ -#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ -#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */ -#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */ -#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ -#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ -#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ -#if defined(CONFIG_AM34_2) -#define TM12ICR GxICR(TM12IRQ) /* timer 12 uflow intr ctrl reg */ -#define TM13ICR GxICR(TM13IRQ) /* timer 13 uflow intr ctrl reg */ -#define TM14ICR GxICR(TM14IRQ) /* timer 14 uflow intr ctrl reg */ -#define TM15ICR GxICR(TM15IRQ) /* timer 15 uflow intr ctrl reg */ -#endif /* CONFIG_AM34_2 */ - -/* - * 16-bit timer 6 - */ -#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ -#define TM6MD_SRC 0x0007 /* timer source */ -#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ -#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */ -#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ -#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ -#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ -#define TM6MD_SRC_TM2UFLOW 0x0006 /* - timer 2 underflow */ -#if defined(CONFIG_AM33_2) -/* #define TM6MD_SRC_TM6IOB_BOTH 0x0006 */ /* - TM6IOB pin input (both edges) */ -#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ -#endif /* CONFIG_AM33_2 */ -#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ -#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ -#if defined(CONFIG_AM33_2) -#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ -#define TM6MD_PWM 0x3800 /* PWM output mode */ -#define TM6MD_PWM_DIS 0x0000 /* - disabled */ -#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */ -#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ -#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ -#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ -#endif /* CONFIG_AM33_2 */ - -#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ -#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ - -#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ -#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ -#if defined(CONFIG_AM33_2) -#define TM6MDA_OUT 0x07 /* output select */ -#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ -#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ -#define TM6MDA_OUT_SETA 0x02 /* - set at match A */ -#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ -#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ -#define TM6MDA_MODE 0xc0 /* compare A register mode */ -#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ -#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ -#define TM6MDA_EDGE 0x20 /* compare A edge select */ -#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ -#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ -#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ -#else /* !CONFIG_AM33_2 */ -#define TM6MDA_MODE 0x40 /* compare A register mode */ -#endif /* CONFIG_AM33_2 */ - -#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ -#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ -#if defined(CONFIG_AM33_2) -#define TM6MDB_OUT 0x07 /* output select */ -#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ -#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ -#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ -#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ -#define TM6MDB_MODE 0xc0 /* compare B register mode */ -#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ -#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ -#define TM6MDB_EDGE 0x20 /* compare B edge select */ -#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ -#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ -#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ -#else /* !CONFIG_AM33_2 */ -#define TM6MDB_MODE 0x40 /* compare B register mode */ -#endif /* CONFIG_AM33_2 */ - -#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ -#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ -#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */ - -#define TM6IRQ 6 /* timer 6 IRQ */ -#define TM6AIRQ 9 /* timer 6A IRQ */ -#define TM6BIRQ 10 /* timer 6B IRQ */ - -#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */ -#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ -#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ - -#if defined(CONFIG_AM34_2) -/* - * MTM: OS Tick-Timer - */ -#define TMTMD __SYSREG(0xd4004100, u8) /* Tick Timer mode register */ -#define TMTMD_TMTLDE 0x40 /* initialize TMTBC = TMTBR */ -#define TMTMD_TMTCNE 0x80 /* timer count enable */ - -#define TMTBR __SYSREG(0xd4004110, u32) /* Tick Timer mode reg */ -#define TMTBC __SYSREG(0xd4004120, u32) /* Tick Timer mode reg */ - -/* - * MTM: OS Timestamp-Timer - */ -#define TMSMD __SYSREG(0xd4004140, u8) /* Tick Timer mode register */ -#define TMSMD_TMSLDE 0x40 /* initialize TMSBC = TMSBR */ -#define TMSMD_TMSCNE 0x80 /* timer count enable */ - -#define TMSBR __SYSREG(0xd4004150, u32) /* Tick Timer mode register */ -#define TMSBC __SYSREG(0xd4004160, u32) /* Tick Timer mode register */ - -#define TMTIRQ 119 /* OS Tick timer IRQ */ -#define TMSIRQ 120 /* Timestamp timer IRQ */ - -#define TMTICR GxICR(TMTIRQ) /* OS Tick timer uflow intr ctrl reg */ -#define TMSICR GxICR(TMSIRQ) /* Timestamp timer uflow intr ctrl reg */ -#endif /* CONFIG_AM34_2 */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h deleted file mode 100644 index f8e66425cbf8..000000000000 --- a/arch/mn10300/include/asm/timex.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN10300 Architecture time management specifications - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TIMEX_H -#define _ASM_TIMEX_H - -#include - -#define TICK_SIZE (tick_nsec / 1000) - -#define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */ - -#ifdef __KERNEL__ - -extern cycles_t cacheflush_time; - -static inline cycles_t get_cycles(void) -{ - return read_timestamp_counter(); -} - -extern int init_clockevents(void); -extern int init_clocksource(void); - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/include/asm/tlb.h b/arch/mn10300/include/asm/tlb.h deleted file mode 100644 index 65d232b96613..000000000000 --- a/arch/mn10300/include/asm/tlb.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN10300 TLB definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_TLB_H -#define _ASM_TLB_H - -#include - -extern void check_pgt_cache(void); - -/* - * we don't need any special per-pte or per-vma handling... - */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -/* - * .. because we flush the whole mm when it fills up - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -/* for now, just use the generic stuff */ -#include - -#endif /* _ASM_TLB_H */ diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h deleted file mode 100644 index efddd6e1adea..000000000000 --- a/arch/mn10300/include/asm/tlbflush.h +++ /dev/null @@ -1,154 +0,0 @@ -/* MN10300 TLB flushing functions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TLBFLUSH_H -#define _ASM_TLBFLUSH_H - -#include -#include - -struct tlb_state { - struct mm_struct *active_mm; - int state; -}; -DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); - -/** - * local_flush_tlb - Flush the current MM's entries from the local CPU's TLBs - */ -static inline void local_flush_tlb(void) -{ - int w; - asm volatile( - " mov %1,%0 \n" - " or %2,%0 \n" - " mov %0,%1 \n" - : "=d"(w) - : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) - : "cc", "memory"); -} - -/** - * local_flush_tlb_all - Flush all entries from the local CPU's TLBs - */ -static inline void local_flush_tlb_all(void) -{ - local_flush_tlb(); -} - -/** - * local_flush_tlb_one - Flush one entry from the local CPU's TLBs - */ -static inline void local_flush_tlb_one(unsigned long addr) -{ - local_flush_tlb(); -} - -/** - * local_flush_tlb_page - Flush a page's entry from the local CPU's TLBs - * @mm: The MM to flush for - * @addr: The address of the target page in RAM (not its page struct) - */ -static inline -void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr) -{ - unsigned long pteu, flags, cnx; - - addr &= PAGE_MASK; - - local_irq_save(flags); - - cnx = 1; -#ifdef CONFIG_MN10300_TLB_USE_PIDR - cnx = mm->context.tlbpid[smp_processor_id()]; -#endif - if (cnx) { - pteu = addr; -#ifdef CONFIG_MN10300_TLB_USE_PIDR - pteu |= cnx & xPTEU_PID; -#endif - IPTEU = pteu; - DPTEU = pteu; - if (IPTEL & xPTEL_V) - IPTEL = 0; - if (DPTEL & xPTEL_V) - DPTEL = 0; - } - local_irq_restore(flags); -} - -/* - * TLB flushing: - * - * - flush_tlb() flushes the current mm struct TLBs - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(mm, start, end) flushes a range of pages - * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables - */ -#ifdef CONFIG_SMP - -#include - -extern void flush_tlb_all(void); -extern void flush_tlb_current_task(void); -extern void flush_tlb_mm(struct mm_struct *); -extern void flush_tlb_page(struct vm_area_struct *, unsigned long); - -#define flush_tlb() flush_tlb_current_task() - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - flush_tlb_mm(vma->vm_mm); -} - -#else /* CONFIG_SMP */ - -static inline void flush_tlb_all(void) -{ - preempt_disable(); - local_flush_tlb_all(); - preempt_enable(); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - preempt_disable(); - local_flush_tlb_all(); - preempt_enable(); -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - preempt_disable(); - local_flush_tlb_all(); - preempt_enable(); -} - -#define flush_tlb_page(vma, addr) local_flush_tlb_page((vma)->vm_mm, addr) -#define flush_tlb() flush_tlb_all() - -#endif /* CONFIG_SMP */ - -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ - flush_tlb_all(); -} - -static inline void flush_tlb_pgtables(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ -} - -#endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/mn10300/include/asm/topology.h b/arch/mn10300/include/asm/topology.h deleted file mode 100644 index 5428f333a02c..000000000000 --- a/arch/mn10300/include/asm/topology.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h deleted file mode 100644 index 3d6e48311bef..000000000000 --- a/arch/mn10300/include/asm/types.h +++ /dev/null @@ -1,22 +0,0 @@ -/* MN10300 Basic type definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TYPES_H -#define _ASM_TYPES_H - -#include - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ - -#define BITS_PER_LONG 32 - -#endif /* _ASM_TYPES_H */ diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h deleted file mode 100644 index 5af468fd1359..000000000000 --- a/arch/mn10300/include/asm/uaccess.h +++ /dev/null @@ -1,297 +0,0 @@ -/* MN10300 userspace access functions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) -#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF) -#define USER_DS MAKE_MM_SEG(TASK_SIZE) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * check that a range of addresses falls within the current address limit - */ -static inline int ___range_ok(unsigned long addr, unsigned int size) -{ - int flag = 1, tmp; - - asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */ - " bcs 0f \n" - " cmp %4,%1 \n" /* jump if addr+size>limit (error) */ - " bhi 0f \n" - " clr %0 \n" /* mark okay */ - "0: \n" - : "=r"(flag), "=&r"(tmp) - : "1"(addr), "ir"(size), - "r"(current_thread_info()->addr_limit.seg), "0"(flag) - : "cc" - ); - - return flag; -} - -#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size)) - -#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0) - -#include - -#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: { \ - unsigned char __gu_val; \ - __get_user_asm("bu"); \ - (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ - break; \ - } \ - case 2: { \ - unsigned short __gu_val; \ - __get_user_asm("hu"); \ - (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ - break; \ - } \ - case 4: { \ - unsigned int __gu_val; \ - __get_user_asm(""); \ - (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ - break; \ - } \ - default: \ - __get_user_unknown(); \ - break; \ - } \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - const __typeof__(*(ptr))* __guc_ptr = (ptr); \ - int _e; \ - if (likely(__access_ok((unsigned long) __guc_ptr, (size)))) \ - _e = __get_user_nocheck((x), __guc_ptr, (size)); \ - else { \ - _e = -EFAULT; \ - (x) = (__typeof__(x))0; \ - } \ - _e; \ -}) - -#define __get_user_asm(INSN) \ -({ \ - asm volatile( \ - "1:\n" \ - " mov"INSN" %2,%1\n" \ - " mov 0,%0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n\t" \ - " mov 0,%1\n" \ - " mov %3,%0\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "=&r" (__gu_err), "=&r" (__gu_val) \ - : "m" (__m(__gu_addr)), "i" (-EFAULT)); \ -}) - -extern int __get_user_unknown(void); - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - union { \ - __typeof__(*(ptr)) val; \ - u32 bits[2]; \ - } __pu_val; \ - unsigned long __pu_addr; \ - int __pu_err; \ - __pu_val.val = (x); \ - __pu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __put_user_asm("bu"); break; \ - case 2: __put_user_asm("hu"); break; \ - case 4: __put_user_asm("" ); break; \ - case 8: __put_user_asm8(); break; \ - default: __pu_err = __put_user_unknown(); break; \ - } \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - union { \ - __typeof__(*(ptr)) val; \ - u32 bits[2]; \ - } __pu_val; \ - unsigned long __pu_addr; \ - int __pu_err; \ - __pu_val.val = (x); \ - __pu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__pu_addr, size))) { \ - switch (size) { \ - case 1: __put_user_asm("bu"); break; \ - case 2: __put_user_asm("hu"); break; \ - case 4: __put_user_asm("" ); break; \ - case 8: __put_user_asm8(); break; \ - default: __pu_err = __put_user_unknown(); break; \ - } \ - } \ - else { \ - __pu_err = -EFAULT; \ - } \ - __pu_err; \ -}) - -#define __put_user_asm(INSN) \ -({ \ - asm volatile( \ - "1:\n" \ - " mov"INSN" %1,%2\n" \ - " mov 0,%0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n" \ - " mov %3,%0\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "=&r" (__pu_err) \ - : "r" (__pu_val.val), "m" (__m(__pu_addr)), \ - "i" (-EFAULT) \ - ); \ -}) - -#define __put_user_asm8() \ -({ \ - asm volatile( \ - "1: mov %1,%3 \n" \ - "2: mov %2,%4 \n" \ - " mov 0,%0 \n" \ - "3: \n" \ - " .section .fixup,\"ax\" \n" \ - "4: \n" \ - " mov %5,%0 \n" \ - " jmp 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4 \n" \ - " .long 1b, 4b \n" \ - " .long 2b, 4b \n" \ - " .previous \n" \ - : "=&r" (__pu_err) \ - : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \ - "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \ - "i" (-EFAULT) \ - ); \ -}) - -extern int __put_user_unknown(void); - - -/* - * Copy To/From Userspace - */ -/* Generic arbitrary sized copy. */ -#define __copy_user(to, from, size) \ -do { \ - if (size) { \ - void *__to = to; \ - const void *__from = from; \ - int w; \ - asm volatile( \ - "0: movbu (%0),%3;\n" \ - "1: movbu %3,(%1);\n" \ - " inc %0;\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 0b;\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - " .previous\n" \ - : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ - : "0"(__from), "1"(__to), "2"(size) \ - : "cc", "memory"); \ - } \ -} while (0) - -static inline unsigned long -raw_copy_from_user(void *to, const void __user *from, unsigned long n) -{ - __copy_user(to, from, n); - return n; -} - -static inline unsigned long -raw_copy_to_user(void __user *to, const void *from, unsigned long n) -{ - __copy_user(to, from, n); - return n; -} - -extern long strncpy_from_user(char *dst, const char __user *src, long count); -extern long strnlen_user(const char __user *str, long n); -extern unsigned long clear_user(void __user *mem, unsigned long len); -extern unsigned long __clear_user(void __user *mem, unsigned long len); - -#endif /* _ASM_UACCESS_H */ diff --git a/arch/mn10300/include/asm/ucontext.h b/arch/mn10300/include/asm/ucontext.h deleted file mode 100644 index fcab5c1d8e18..000000000000 --- a/arch/mn10300/include/asm/ucontext.h +++ /dev/null @@ -1,22 +0,0 @@ -/* MN10300 User context - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UCONTEXT_H -#define _ASM_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_UCONTEXT_H */ diff --git a/arch/mn10300/include/asm/unaligned.h b/arch/mn10300/include/asm/unaligned.h deleted file mode 100644 index 0df671318ae4..000000000000 --- a/arch/mn10300/include/asm/unaligned.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Unaligned memory access handling - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_MN10300_UNALIGNED_H -#define _ASM_MN10300_UNALIGNED_H - -#include -#include - -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le - -#endif /* _ASM_MN10300_UNALIGNED_H */ diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h deleted file mode 100644 index 0522468f488b..000000000000 --- a/arch/mn10300/include/asm/unistd.h +++ /dev/null @@ -1,47 +0,0 @@ -/* MN10300 System call number list - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNISTD_H -#define _ASM_UNISTD_H - -#include - - -#define NR_syscalls 340 - -/* - * specify the deprecated syscalls we want to support on this arch - */ -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_IPC -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLD_SELECT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_FORK -#define __ARCH_WANT_SYS_VFORK -#define __ARCH_WANT_SYS_CLONE - -#endif /* _ASM_UNISTD_H */ diff --git a/arch/mn10300/include/asm/user.h b/arch/mn10300/include/asm/user.h deleted file mode 100644 index e1193908b78c..000000000000 --- a/arch/mn10300/include/asm/user.h +++ /dev/null @@ -1,53 +0,0 @@ -/* MN10300 User process data - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_USER_H -#define _ASM_USER_H - -#include -#include - -#ifndef __ASSEMBLY__ -/* - * When the kernel dumps core, it starts by dumping the user struct - this will - * be used by gdb to figure out where the data and stack segments are within - * the file, and what virtual addresses to use. - */ -struct user { - /* We start with the registers, to mimic the way that "memory" is - * returned from the ptrace(3,...) function. - */ - struct pt_regs regs; /* Where the registers are actually stored */ - - /* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */ - - /* the registers */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; -#endif - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR +(u.start_code) -#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG) - -#endif /* _ASM_USER_H */ diff --git a/arch/mn10300/include/asm/vga.h b/arch/mn10300/include/asm/vga.h deleted file mode 100644 index 0163e50a3459..000000000000 --- a/arch/mn10300/include/asm/vga.h +++ /dev/null @@ -1,17 +0,0 @@ -/* MN10300 VGA register definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_VGA_H -#define _ASM_VGA_H - - - -#endif /* _ASM_VGA_H */ diff --git a/arch/mn10300/include/asm/xor.h b/arch/mn10300/include/asm/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/arch/mn10300/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/uapi/asm/Kbuild b/arch/mn10300/include/uapi/asm/Kbuild deleted file mode 100644 index b04fd1632051..000000000000 --- a/arch/mn10300/include/uapi/asm/Kbuild +++ /dev/null @@ -1,6 +0,0 @@ -# UAPI Header export list -include include/uapi/asm-generic/Kbuild.asm - -generic-y += bpf_perf_event.h -generic-y += poll.h -generic-y += siginfo.h diff --git a/arch/mn10300/include/uapi/asm/auxvec.h b/arch/mn10300/include/uapi/asm/auxvec.h deleted file mode 100644 index 4fdb60b2ae39..000000000000 --- a/arch/mn10300/include/uapi/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_AUXVEC_H -#define _ASM_AUXVEC_H - -#endif diff --git a/arch/mn10300/include/uapi/asm/bitsperlong.h b/arch/mn10300/include/uapi/asm/bitsperlong.h deleted file mode 100644 index 76da34b10f59..000000000000 --- a/arch/mn10300/include/uapi/asm/bitsperlong.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include diff --git a/arch/mn10300/include/uapi/asm/byteorder.h b/arch/mn10300/include/uapi/asm/byteorder.h deleted file mode 100644 index 3467df91216c..000000000000 --- a/arch/mn10300/include/uapi/asm/byteorder.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_BYTEORDER_H -#define _ASM_BYTEORDER_H - -#include - -#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/mn10300/include/uapi/asm/errno.h b/arch/mn10300/include/uapi/asm/errno.h deleted file mode 100644 index 9addba592646..000000000000 --- a/arch/mn10300/include/uapi/asm/errno.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include diff --git a/arch/mn10300/include/uapi/asm/fcntl.h b/arch/mn10300/include/uapi/asm/fcntl.h deleted file mode 100644 index a77648c505d1..000000000000 --- a/arch/mn10300/include/uapi/asm/fcntl.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include diff --git a/arch/mn10300/include/uapi/asm/ioctl.h b/arch/mn10300/include/uapi/asm/ioctl.h deleted file mode 100644 index b809c4566e5f..000000000000 --- a/arch/mn10300/include/uapi/asm/ioctl.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include diff --git a/arch/mn10300/include/uapi/asm/ioctls.h b/arch/mn10300/include/uapi/asm/ioctls.h deleted file mode 100644 index 0955d4f854e9..000000000000 --- a/arch/mn10300/include/uapi/asm/ioctls.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_IOCTLS_H -#define _ASM_IOCTLS_H - -#include - -#endif /* _ASM_IOCTLS_H */ diff --git a/arch/mn10300/include/uapi/asm/ipcbuf.h b/arch/mn10300/include/uapi/asm/ipcbuf.h deleted file mode 100644 index 90d6445a14df..000000000000 --- a/arch/mn10300/include/uapi/asm/ipcbuf.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include diff --git a/arch/mn10300/include/uapi/asm/kvm_para.h b/arch/mn10300/include/uapi/asm/kvm_para.h deleted file mode 100644 index baacc4996d18..000000000000 --- a/arch/mn10300/include/uapi/asm/kvm_para.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include diff --git a/arch/mn10300/include/uapi/asm/mman.h b/arch/mn10300/include/uapi/asm/mman.h deleted file mode 100644 index eb7f4798c036..000000000000 --- a/arch/mn10300/include/uapi/asm/mman.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include - -#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */ - -#define arch_mmap_check(addr, len, flags) \ - (((flags) & MAP_FIXED && (addr) < MIN_MAP_ADDR) ? -EINVAL : 0) diff --git a/arch/mn10300/include/uapi/asm/msgbuf.h b/arch/mn10300/include/uapi/asm/msgbuf.h deleted file mode 100644 index 5982def83355..000000000000 --- a/arch/mn10300/include/uapi/asm/msgbuf.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_MSGBUF_H -#define _ASM_MSGBUF_H - -/* - * The msqid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MSGBUF_H */ diff --git a/arch/mn10300/include/uapi/asm/param.h b/arch/mn10300/include/uapi/asm/param.h deleted file mode 100644 index e0020d7742bd..000000000000 --- a/arch/mn10300/include/uapi/asm/param.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* MN10300 Kernel parameters - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PARAM_H -#define _ASM_PARAM_H - -#include - -#define COMMAND_LINE_SIZE 256 - -#endif /* _ASM_PARAM_H */ diff --git a/arch/mn10300/include/uapi/asm/posix_types.h b/arch/mn10300/include/uapi/asm/posix_types.h deleted file mode 100644 index 6b4cfc7136e9..000000000000 --- a/arch/mn10300/include/uapi/asm/posix_types.h +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* MN10300 POSIX types - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_POSIX_TYPES_H -#define _ASM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t - -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t - -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -#define __kernel_uid_t __kernel_uid_t - -#if __GNUC__ == 4 -typedef unsigned int __kernel_size_t; -typedef signed int __kernel_ssize_t; -#else -typedef unsigned long __kernel_size_t; -typedef signed long __kernel_ssize_t; -#endif -typedef int __kernel_ptrdiff_t; -#define __kernel_size_t __kernel_size_t - -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif /* _ASM_POSIX_TYPES_H */ diff --git a/arch/mn10300/include/uapi/asm/ptrace.h b/arch/mn10300/include/uapi/asm/ptrace.h deleted file mode 100644 index f485c481a266..000000000000 --- a/arch/mn10300/include/uapi/asm/ptrace.h +++ /dev/null @@ -1,85 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* MN10300 Exception frame layout and ptrace constants - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _UAPI_ASM_PTRACE_H -#define _UAPI_ASM_PTRACE_H - -#define PT_A3 0 -#define PT_A2 1 -#define PT_D3 2 -#define PT_D2 3 -#define PT_MCVF 4 -#define PT_MCRL 5 -#define PT_MCRH 6 -#define PT_MDRQ 7 -#define PT_E1 8 -#define PT_E0 9 -#define PT_E7 10 -#define PT_E6 11 -#define PT_E5 12 -#define PT_E4 13 -#define PT_E3 14 -#define PT_E2 15 -#define PT_SP 16 -#define PT_LAR 17 -#define PT_LIR 18 -#define PT_MDR 19 -#define PT_A1 20 -#define PT_A0 21 -#define PT_D1 22 -#define PT_D0 23 -#define PT_ORIG_D0 24 -#define PT_EPSW 25 -#define PT_PC 26 -#define NR_PTREGS 27 - -/* - * This defines the way registers are stored in the event of an exception - * - the strange order is due to the MOVM instruction - */ -struct pt_regs { - unsigned long a3; /* syscall arg 3 */ - unsigned long a2; /* syscall arg 4 */ - unsigned long d3; /* syscall arg 5 */ - unsigned long d2; /* syscall arg 6 */ - unsigned long mcvf; - unsigned long mcrl; - unsigned long mcrh; - unsigned long mdrq; - unsigned long e1; - unsigned long e0; - unsigned long e7; - unsigned long e6; - unsigned long e5; - unsigned long e4; - unsigned long e3; - unsigned long e2; - unsigned long sp; - unsigned long lar; - unsigned long lir; - unsigned long mdr; - unsigned long a1; - unsigned long a0; /* syscall arg 1 */ - unsigned long d1; /* syscall arg 2 */ - unsigned long d0; /* syscall ret */ - struct pt_regs *next; /* next frame pointer */ - unsigned long orig_d0; /* syscall number */ - unsigned long epsw; - unsigned long pc; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -#endif /* _UAPI_ASM_PTRACE_H */ diff --git a/arch/mn10300/include/uapi/asm/resource.h b/arch/mn10300/include/uapi/asm/resource.h deleted file mode 100644 index 49a81fbab43d..000000000000 --- a/arch/mn10300/include/uapi/asm/resource.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include diff --git a/arch/mn10300/include/uapi/asm/sembuf.h b/arch/mn10300/include/uapi/asm/sembuf.h deleted file mode 100644 index ef44c42c7e0f..000000000000 --- a/arch/mn10300/include/uapi/asm/sembuf.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SEMBUF_H -#define _ASM_SEMBUF_H - -/* - * The semid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SEMBUF_H */ diff --git a/arch/mn10300/include/uapi/asm/setup.h b/arch/mn10300/include/uapi/asm/setup.h deleted file mode 100644 index 043dd4b92026..000000000000 --- a/arch/mn10300/include/uapi/asm/setup.h +++ /dev/null @@ -1,5 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * There isn't anything here anymore, but the file must not be empty or patch - * will delete it. - */ diff --git a/arch/mn10300/include/uapi/asm/shmbuf.h b/arch/mn10300/include/uapi/asm/shmbuf.h deleted file mode 100644 index 6e81f74f51c6..000000000000 --- a/arch/mn10300/include/uapi/asm/shmbuf.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SHMBUF_H -#define _ASM_SHMBUF_H - -/* - * The shmid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SHMBUF_H */ diff --git a/arch/mn10300/include/uapi/asm/sigcontext.h b/arch/mn10300/include/uapi/asm/sigcontext.h deleted file mode 100644 index 1c361fabb977..000000000000 --- a/arch/mn10300/include/uapi/asm/sigcontext.h +++ /dev/null @@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* MN10300 Userspace signal context - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SIGCONTEXT_H -#define _ASM_SIGCONTEXT_H - -struct fpucontext { - /* Regular FPU environment */ - unsigned long fs[32]; /* fpu registers */ - unsigned long fpcr; /* fpu control register */ -}; - -struct sigcontext { - unsigned long d0; - unsigned long d1; - unsigned long d2; - unsigned long d3; - unsigned long a0; - unsigned long a1; - unsigned long a2; - unsigned long a3; - unsigned long e0; - unsigned long e1; - unsigned long e2; - unsigned long e3; - unsigned long e4; - unsigned long e5; - unsigned long e6; - unsigned long e7; - unsigned long lar; - unsigned long lir; - unsigned long mdr; - unsigned long mcvf; - unsigned long mcrl; - unsigned long mcrh; - unsigned long mdrq; - unsigned long sp; - unsigned long epsw; - unsigned long pc; - struct fpucontext *fpucontext; - unsigned long oldmask; -}; - - -#endif /* _ASM_SIGCONTEXT_H */ diff --git a/arch/mn10300/include/uapi/asm/signal.h b/arch/mn10300/include/uapi/asm/signal.h deleted file mode 100644 index 566cb199d5ac..000000000000 --- a/arch/mn10300/include/uapi/asm/signal.h +++ /dev/null @@ -1,126 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* MN10300 Signal definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _UAPI_ASM_SIGNAL_H -#define _UAPI_ASM_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifndef __KERNEL__ -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001U -#define SA_NOCLDWAIT 0x00000002U -#define SA_SIGINFO 0x00000004U -#define SA_ONSTACK 0x08000000U -#define SA_RESTART 0x10000000U -#define SA_NODEFER 0x40000000U -#define SA_RESETHAND 0x80000000U - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifndef __KERNEL__ -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - - -#endif /* _UAPI_ASM_SIGNAL_H */ diff --git a/arch/mn10300/include/uapi/asm/socket.h b/arch/mn10300/include/uapi/asm/socket.h deleted file mode 100644 index b35eee132142..000000000000 --- a/arch/mn10300/include/uapi/asm/socket.h +++ /dev/null @@ -1,108 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -#define SO_REUSEPORT 15 -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 -#define SO_GET_FILTER SO_ATTACH_FILTER - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#define SO_LOCK_FILTER 44 - -#define SO_SELECT_ERR_QUEUE 45 - -#define SO_BUSY_POLL 46 - -#define SO_MAX_PACING_RATE 47 - -#define SO_BPF_EXTENSIONS 48 - -#define SO_INCOMING_CPU 49 - -#define SO_ATTACH_BPF 50 -#define SO_DETACH_BPF SO_DETACH_FILTER - -#define SO_ATTACH_REUSEPORT_CBPF 51 -#define SO_ATTACH_REUSEPORT_EBPF 52 - -#define SO_CNX_ADVICE 53 - -#define SCM_TIMESTAMPING_OPT_STATS 54 - -#define SO_MEMINFO 55 - -#define SO_INCOMING_NAPI_ID 56 - -#define SO_COOKIE 57 - -#define SCM_TIMESTAMPING_PKTINFO 58 - -#define SO_PEERGROUPS 59 - -#define SO_ZEROCOPY 60 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/mn10300/include/uapi/asm/sockios.h b/arch/mn10300/include/uapi/asm/sockios.h deleted file mode 100644 index 5706baa3cd0d..000000000000 --- a/arch/mn10300/include/uapi/asm/sockios.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SOCKIOS_H -#define _ASM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_SOCKIOS_H */ diff --git a/arch/mn10300/include/uapi/asm/stat.h b/arch/mn10300/include/uapi/asm/stat.h deleted file mode 100644 index 769f5f8829d4..000000000000 --- a/arch/mn10300/include/uapi/asm/stat.h +++ /dev/null @@ -1,79 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_STAT_H -#define _ASM_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned int st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#define STAT_HAVE_NSEC 1 - -#endif /* _ASM_STAT_H */ diff --git a/arch/mn10300/include/uapi/asm/statfs.h b/arch/mn10300/include/uapi/asm/statfs.h deleted file mode 100644 index 0b91fe198c20..000000000000 --- a/arch/mn10300/include/uapi/asm/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/mn10300/include/uapi/asm/swab.h b/arch/mn10300/include/uapi/asm/swab.h deleted file mode 100644 index d2284dd27ad4..000000000000 --- a/arch/mn10300/include/uapi/asm/swab.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* MN10300 Byte-order primitive construction - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SWAB_H -#define _ASM_SWAB_H - -#include - -#ifdef __GNUC__ - -static inline __attribute__((const)) -__u32 __arch_swab32(__u32 x) -{ - __u32 ret; - asm("swap %1,%0" : "=r" (ret) : "r" (x)); - return ret; -} -#define __arch_swab32 __arch_swab32 - -static inline __attribute__((const)) -__u16 __arch_swab16(__u16 x) -{ - __u16 ret; - asm("swaph %1,%0" : "=r" (ret) : "r" (x)); - return ret; -} -#define __arch_swab32 __arch_swab32 - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#endif /* __GNUC__ */ - -#endif /* _ASM_SWAB_H */ diff --git a/arch/mn10300/include/uapi/asm/termbits.h b/arch/mn10300/include/uapi/asm/termbits.h deleted file mode 100644 index fca82ea2ca2c..000000000000 --- a/arch/mn10300/include/uapi/asm/termbits.h +++ /dev/null @@ -1,202 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_TERMBITS_H -#define _ASM_TERMBITS_H - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ -#define CTVB 004000000000 /* VisioBraille Terminal flow control */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_TERMBITS_H */ diff --git a/arch/mn10300/include/uapi/asm/termios.h b/arch/mn10300/include/uapi/asm/termios.h deleted file mode 100644 index 25981aadb8cd..000000000000 --- a/arch/mn10300/include/uapi/asm/termios.h +++ /dev/null @@ -1,84 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_ASM_TERMIOS_H -#define _UAPI_ASM_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp, &(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) \ - copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) \ - copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) \ - copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) \ - copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _UAPI_ASM_TERMIOS_H */ diff --git a/arch/mn10300/include/uapi/asm/types.h b/arch/mn10300/include/uapi/asm/types.h deleted file mode 100644 index 7d2a697e2937..000000000000 --- a/arch/mn10300/include/uapi/asm/types.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* MN10300 Basic type definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include diff --git a/arch/mn10300/include/uapi/asm/unistd.h b/arch/mn10300/include/uapi/asm/unistd.h deleted file mode 100644 index c0c96b650692..000000000000 --- a/arch/mn10300/include/uapi/asm/unistd.h +++ /dev/null @@ -1,355 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* MN10300 System call number list - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _UAPI_ASM_UNISTD_H -#define _UAPI_ASM_UNISTD_H - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_madvise1 219 /* delete when C lib stub is removed */ -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -/* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_cacheflush 289 -#define __NR_ioprio_set 290 -#define __NR_ioprio_get 291 -#define __NR_inotify_init 292 -#define __NR_inotify_add_watch 293 -#define __NR_inotify_rm_watch 294 -#define __NR_migrate_pages 295 -#define __NR_openat 296 -#define __NR_mkdirat 297 -#define __NR_mknodat 298 -#define __NR_fchownat 299 -#define __NR_futimesat 300 -#define __NR_fstatat64 301 -#define __NR_unlinkat 302 -#define __NR_renameat 303 -#define __NR_linkat 304 -#define __NR_symlinkat 305 -#define __NR_readlinkat 306 -#define __NR_fchmodat 307 -#define __NR_faccessat 308 -#define __NR_pselect6 309 -#define __NR_ppoll 310 -#define __NR_unshare 311 -#define __NR_set_robust_list 312 -#define __NR_get_robust_list 313 -#define __NR_splice 314 -#define __NR_sync_file_range 315 -#define __NR_tee 316 -#define __NR_vmsplice 317 -#define __NR_move_pages 318 -#define __NR_getcpu 319 -#define __NR_epoll_pwait 320 -#define __NR_utimensat 321 -#define __NR_signalfd 322 -#define __NR_timerfd_create 323 -#define __NR_eventfd 324 -#define __NR_fallocate 325 -#define __NR_timerfd_settime 326 -#define __NR_timerfd_gettime 327 -#define __NR_signalfd4 328 -#define __NR_eventfd2 329 -#define __NR_epoll_create1 330 -#define __NR_dup3 331 -#define __NR_pipe2 332 -#define __NR_inotify_init1 333 -#define __NR_preadv 334 -#define __NR_pwritev 335 -#define __NR_rt_tgsigqueueinfo 336 -#define __NR_perf_event_open 337 -#define __NR_recvmmsg 338 -#define __NR_setns 339 - -#endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile deleted file mode 100644 index de32af0e4b6e..000000000000 --- a/arch/mn10300/kernel/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the MN10300-specific core kernel code -# -extra-y := head.o vmlinux.lds - -fpu-obj-y := fpu-nofpu.o fpu-nofpu-low.o -fpu-obj-$(CONFIG_FPU) := fpu.o fpu-low.o - -obj-y := process.o signal.o entry.o traps.o irq.o \ - ptrace.o setup.o time.o sys_mn10300.o io.o \ - switch_to.o mn10300_ksyms.o $(fpu-obj-y) \ - csrc-mn10300.o cevt-mn10300.o - -obj-$(CONFIG_SMP) += smp.o smp-low.o - -obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o - -obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \ - mn10300-debug.o -obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o -obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o -obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o - -obj-$(CONFIG_MN10300_RTC) += rtc.o -obj-$(CONFIG_PROFILE) += profile.o profile-low.o -obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_KPROBES) += kprobes.o -obj-$(CONFIG_KGDB) += kgdb.o diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c deleted file mode 100644 index 57e6cc96267b..000000000000 --- a/arch/mn10300/kernel/asm-offsets.c +++ /dev/null @@ -1,108 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed - * to extract and format the required data. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "sigframe.h" -#include "mn10300-serial.h" - -void foo(void) -{ - OFFSET(SIGCONTEXT_d0, sigcontext, d0); - OFFSET(SIGCONTEXT_d1, sigcontext, d1); - BLANK(); - - OFFSET(TI_task, thread_info, task); - OFFSET(TI_frame, thread_info, frame); - OFFSET(TI_flags, thread_info, flags); - OFFSET(TI_cpu, thread_info, cpu); - OFFSET(TI_preempt_count, thread_info, preempt_count); - OFFSET(TI_addr_limit, thread_info, addr_limit); - BLANK(); - - OFFSET(REG_D0, pt_regs, d0); - OFFSET(REG_D1, pt_regs, d1); - OFFSET(REG_D2, pt_regs, d2); - OFFSET(REG_D3, pt_regs, d3); - OFFSET(REG_A0, pt_regs, a0); - OFFSET(REG_A1, pt_regs, a1); - OFFSET(REG_A2, pt_regs, a2); - OFFSET(REG_A3, pt_regs, a3); - OFFSET(REG_E0, pt_regs, e0); - OFFSET(REG_E1, pt_regs, e1); - OFFSET(REG_E2, pt_regs, e2); - OFFSET(REG_E3, pt_regs, e3); - OFFSET(REG_E4, pt_regs, e4); - OFFSET(REG_E5, pt_regs, e5); - OFFSET(REG_E6, pt_regs, e6); - OFFSET(REG_E7, pt_regs, e7); - OFFSET(REG_SP, pt_regs, sp); - OFFSET(REG_EPSW, pt_regs, epsw); - OFFSET(REG_PC, pt_regs, pc); - OFFSET(REG_LAR, pt_regs, lar); - OFFSET(REG_LIR, pt_regs, lir); - OFFSET(REG_MDR, pt_regs, mdr); - OFFSET(REG_MCVF, pt_regs, mcvf); - OFFSET(REG_MCRL, pt_regs, mcrl); - OFFSET(REG_MCRH, pt_regs, mcrh); - OFFSET(REG_MDRQ, pt_regs, mdrq); - OFFSET(REG_ORIG_D0, pt_regs, orig_d0); - OFFSET(REG_NEXT, pt_regs, next); - DEFINE(REG__END, sizeof(struct pt_regs)); - BLANK(); - - OFFSET(THREAD_UREGS, thread_struct, uregs); - OFFSET(THREAD_PC, thread_struct, pc); - OFFSET(THREAD_SP, thread_struct, sp); - OFFSET(THREAD_A3, thread_struct, a3); - OFFSET(THREAD_USP, thread_struct, usp); -#ifdef CONFIG_FPU - OFFSET(THREAD_FPU_FLAGS, thread_struct, fpu_flags); - OFFSET(THREAD_FPU_STATE, thread_struct, fpu_state); - DEFINE(__THREAD_USING_FPU, THREAD_USING_FPU); - DEFINE(__THREAD_HAS_FPU, THREAD_HAS_FPU); -#endif /* CONFIG_FPU */ - BLANK(); - - OFFSET(TASK_THREAD, task_struct, thread); - BLANK(); - - DEFINE(CLONE_VM_asm, CLONE_VM); - DEFINE(CLONE_FS_asm, CLONE_FS); - DEFINE(CLONE_FILES_asm, CLONE_FILES); - DEFINE(CLONE_SIGHAND_asm, CLONE_SIGHAND); - DEFINE(CLONE_UNTRACED_asm, CLONE_UNTRACED); - DEFINE(SIGCHLD_asm, SIGCHLD); - BLANK(); - - OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext); - - DEFINE(PAGE_SIZE_asm, PAGE_SIZE); - - OFFSET(__rx_buffer, mn10300_serial_port, rx_buffer); - OFFSET(__rx_inp, mn10300_serial_port, rx_inp); - OFFSET(__rx_outp, mn10300_serial_port, rx_outp); - OFFSET(__uart_state, mn10300_serial_port, uart.state); - OFFSET(__tx_xchar, mn10300_serial_port, tx_xchar); - OFFSET(__tx_flags, mn10300_serial_port, tx_flags); - OFFSET(__intr_flags, mn10300_serial_port, intr_flags); - OFFSET(__rx_icr, mn10300_serial_port, rx_icr); - OFFSET(__tx_icr, mn10300_serial_port, tx_icr); - OFFSET(__tm_icr, mn10300_serial_port, _tmicr); - OFFSET(__iobase, mn10300_serial_port, _iobase); - - DEFINE(__UART_XMIT_SIZE, UART_XMIT_SIZE); - OFFSET(__xmit_buffer, uart_state, xmit.buf); - OFFSET(__xmit_head, uart_state, xmit.head); - OFFSET(__xmit_tail, uart_state, xmit.tail); -} diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c deleted file mode 100644 index 2b21bbc9efa4..000000000000 --- a/arch/mn10300/kernel/cevt-mn10300.c +++ /dev/null @@ -1,137 +0,0 @@ -/* MN10300 clockevents - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include "internal.h" - -#ifdef CONFIG_SMP -#if (CONFIG_NR_CPUS > 2) && !defined(CONFIG_GEENERIC_CLOCKEVENTS_BROADCAST) -#error "This doesn't scale well! Need per-core local timers." -#endif -#else /* CONFIG_SMP */ -#define stop_jiffies_counter1() -#define reload_jiffies_counter1(x) -#define TMJC1IRQ TMJCIRQ -#endif - - -static int next_event(unsigned long delta, - struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - - if (cpu == 0) { - stop_jiffies_counter(); - reload_jiffies_counter(delta - 1); - } else { - stop_jiffies_counter1(); - reload_jiffies_counter1(delta - 1); - } - return 0; -} - -static DEFINE_PER_CPU(struct clock_event_device, mn10300_clockevent_device); -static DEFINE_PER_CPU(struct irqaction, timer_irq); - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *cd; - unsigned int cpu = smp_processor_id(); - - if (cpu == 0) - stop_jiffies_counter(); - else - stop_jiffies_counter1(); - - cd = &per_cpu(mn10300_clockevent_device, cpu); - cd->event_handler(cd); - - return IRQ_HANDLED; -} - -static void event_handler(struct clock_event_device *dev) -{ -} - -static inline void setup_jiffies_interrupt(int irq, - struct irqaction *action) -{ - u16 tmp; - setup_irq(irq, action); - set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); - GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - tmp = GxICR(irq); -} - -int __init init_clockevents(void) -{ - struct clock_event_device *cd; - struct irqaction *iact; - unsigned int cpu = smp_processor_id(); - - cd = &per_cpu(mn10300_clockevent_device, cpu); - - if (cpu == 0) { - stop_jiffies_counter(); - cd->irq = TMJCIRQ; - } else { - stop_jiffies_counter1(); - cd->irq = TMJC1IRQ; - } - - cd->name = "Timestamp"; - cd->features = CLOCK_EVT_FEAT_ONESHOT; - - /* Calculate shift/mult. We want to spawn at least 1 second */ - clockevents_calc_mult_shift(cd, MN10300_JCCLK, 1); - - /* Calculate the min / max delta */ - cd->max_delta_ns = clockevent_delta2ns(TMJCBR_MAX, cd); - cd->max_delta_ticks = TMJCBR_MAX; - cd->min_delta_ns = clockevent_delta2ns(100, cd); - cd->min_delta_ticks = 100; - - cd->rating = 200; - cd->cpumask = cpumask_of(smp_processor_id()); - cd->event_handler = event_handler; - cd->set_next_event = next_event; - - iact = &per_cpu(timer_irq, cpu); - iact->flags = IRQF_SHARED | IRQF_TIMER; - iact->handler = timer_interrupt; - - clockevents_register_device(cd); - -#if defined(CONFIG_SMP) && !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) - /* setup timer irq affinity so it only runs on this cpu */ - { - struct irq_data *data; - data = irq_get_irq_data(cd->irq); - cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu)); - iact->flags |= IRQF_NOBALANCING; - } -#endif - - if (cpu == 0) { - reload_jiffies_counter(MN10300_JC_PER_HZ - 1); - iact->name = "CPU0 Timer"; - } else { - reload_jiffies_counter1(MN10300_JC_PER_HZ - 1); - iact->name = "CPU1 Timer"; - } - - setup_jiffies_interrupt(cd->irq, iact); - - return 0; -} diff --git a/arch/mn10300/kernel/csrc-mn10300.c b/arch/mn10300/kernel/csrc-mn10300.c deleted file mode 100644 index 6b74df3661f2..000000000000 --- a/arch/mn10300/kernel/csrc-mn10300.c +++ /dev/null @@ -1,34 +0,0 @@ -/* MN10300 clocksource - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include "internal.h" - -static u64 mn10300_read(struct clocksource *cs) -{ - return read_timestamp_counter(); -} - -static struct clocksource clocksource_mn10300 = { - .name = "TSC", - .rating = 200, - .read = mn10300_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -int __init init_clocksource(void) -{ - startup_timestamp_counter(); - clocksource_register_hz(&clocksource_mn10300, MN10300_TSCCLK); - return 0; -} diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S deleted file mode 100644 index 177d61de51c9..000000000000 --- a/arch/mn10300/kernel/entry.S +++ /dev/null @@ -1,772 +0,0 @@ -############################################################################### -# -# MN10300 Exception and interrupt entry points -# -# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Modified by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_SMP) && defined(CONFIG_GDBSTUB) -#include -#endif /* CONFIG_SMP && CONFIG_GDBSTUB */ - -#ifdef CONFIG_PREEMPT -#define preempt_stop LOCAL_IRQ_DISABLE -#else -#define preempt_stop -#define resume_kernel restore_all -#endif - - .am33_2 - -############################################################################### -# -# the return path for a forked child -# - on entry, D0 holds the address of the previous task to run -# -############################################################################### -ENTRY(ret_from_fork) - call schedule_tail[],0 - GET_THREAD_INFO a2 - - # return 0 to indicate child process - clr d0 - mov d0,(REG_D0,fp) - jmp syscall_exit - -ENTRY(ret_from_kernel_thread) - call schedule_tail[],0 - mov (REG_D0,fp),d0 - mov (REG_A0,fp),a0 - calls (a0) - GET_THREAD_INFO a2 # A2 must be set on return from sys_exit() - clr d0 - mov d0,(REG_D0,fp) - jmp syscall_exit - -############################################################################### -# -# system call handler -# -############################################################################### -ENTRY(system_call) - add -4,sp - SAVE_ALL - mov d0,(REG_ORIG_D0,fp) - GET_THREAD_INFO a2 - cmp nr_syscalls,d0 - bcc syscall_badsys - btst _TIF_SYSCALL_TRACE,(TI_flags,a2) - bne syscall_entry_trace -syscall_call: - add d0,d0,a1 - add a1,a1 - mov (REG_A0,fp),d0 - mov (sys_call_table,a1),a0 - calls (a0) - mov d0,(REG_D0,fp) -syscall_exit: - # make sure we don't miss an interrupt setting need_resched or - # sigpending between sampling and the rti - LOCAL_IRQ_DISABLE - mov (TI_flags,a2),d2 - btst _TIF_ALLWORK_MASK,d2 - bne syscall_exit_work -restore_all: - RESTORE_ALL - -############################################################################### -# -# perform work that needs to be done immediately before resumption and syscall -# tracing -# -############################################################################### - ALIGN -syscall_exit_work: - mov (REG_EPSW,fp),d0 - and EPSW_nSL,d0 - beq resume_kernel # returning to supervisor mode - - LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call - # schedule() instead - btst _TIF_SYSCALL_TRACE,d2 - beq work_pending - mov fp,d0 - call syscall_trace_exit[],0 # do_syscall_trace(regs) - jmp resume_userspace - - ALIGN -work_pending: - btst _TIF_NEED_RESCHED,d2 - beq work_notifysig - -work_resched: - call schedule[],0 - -resume_userspace: - # make sure we don't miss an interrupt setting need_resched or - # sigpending between sampling and the rti - LOCAL_IRQ_DISABLE - - # is there any work to be done other than syscall tracing? - mov (TI_flags,a2),d2 - btst _TIF_WORK_MASK,d2 - beq restore_all - - LOCAL_IRQ_ENABLE - btst _TIF_NEED_RESCHED,d2 - bne work_resched - - # deal with pending signals and notify-resume requests -work_notifysig: - mov fp,d0 - mov d2,d1 - call do_notify_resume[],0 - jmp resume_userspace - - # perform syscall entry tracing -syscall_entry_trace: - mov -ENOSYS,d0 - mov d0,(REG_D0,fp) - mov fp,d0 - call syscall_trace_entry[],0 # returns the syscall number to actually use - mov (REG_D1,fp),d1 - cmp nr_syscalls,d0 - bcs syscall_call - jmp syscall_exit - -syscall_badsys: - mov -ENOSYS,d0 - mov d0,(REG_D0,fp) - jmp resume_userspace - - # userspace resumption stub bypassing syscall exit tracing - .globl ret_from_exception, ret_from_intr - ALIGN -ret_from_exception: - preempt_stop -ret_from_intr: - GET_THREAD_INFO a2 - mov (REG_EPSW,fp),d0 # need to deliver signals before - # returning to userspace - and EPSW_nSL,d0 - bne resume_userspace # returning to userspace - -#ifdef CONFIG_PREEMPT -resume_kernel: - LOCAL_IRQ_DISABLE - mov (TI_preempt_count,a2),d0 # non-zero preempt_count ? - cmp 0,d0 - bne restore_all - -need_resched: - btst _TIF_NEED_RESCHED,(TI_flags,a2) - beq restore_all - mov (REG_EPSW,fp),d0 - and EPSW_IM,d0 - cmp EPSW_IM_7,d0 # interrupts off (exception path) ? - bne restore_all - call preempt_schedule_irq[],0 - jmp need_resched -#else - jmp resume_kernel -#endif - - -############################################################################### -# -# IRQ handler entry point -# - intended to be entered at multiple priorities -# -############################################################################### -ENTRY(irq_handler) - add -4,sp - SAVE_ALL - - # it's not a syscall - mov 0xffffffff,d0 - mov d0,(REG_ORIG_D0,fp) - - mov fp,d0 - call do_IRQ[],0 # do_IRQ(regs) - - jmp ret_from_intr - -############################################################################### -# -# Double Fault handler entry point -# - note that there will not be a stack, D0/A0 will hold EPSW/PC as were -# -############################################################################### - .section .bss - .balign THREAD_SIZE - .space THREAD_SIZE -__df_stack: - .previous - -ENTRY(double_fault) - mov a0,(__df_stack-4) # PC as was - mov d0,(__df_stack-8) # EPSW as was - mn10300_set_dbfleds # display 'db-f' on the LEDs - mov 0xaa55aa55,d0 - mov d0,(__df_stack-12) # no ORIG_D0 - mov sp,a0 # save corrupted SP - mov __df_stack-12,sp # emergency supervisor stack - SAVE_ALL - mov a0,(REG_A0,fp) # save corrupted SP as A0 (which got - # clobbered by the CPU) - mov fp,d0 - calls do_double_fault -double_fault_loop: - bra double_fault_loop - -############################################################################### -# -# Bus Error handler entry point -# - handle external (async) bus errors separately -# -############################################################################### -ENTRY(raw_bus_error) - add -4,sp - mov d0,(sp) -#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) - mov (MMUCTR),d0 - mov d0,(MMUCTR) -#endif - mov (BCBERR),d0 # what - btst BCBERR_BEMR_DMA,d0 # see if it was an external bus error - beq __common_exception_aux # it wasn't - - SAVE_ALL - mov (BCBEAR),d1 # destination of erroneous access - - mov (REG_ORIG_D0,fp),d2 - mov d2,(REG_D0,fp) - mov -1,d2 - mov d2,(REG_ORIG_D0,fp) - - add -4,sp - mov fp,(12,sp) # frame pointer - call io_bus_error[],0 - jmp restore_all - -############################################################################### -# -# NMI exception entry points -# -# This is used by ordinary interrupt channels that have the GxICR_NMI bit set -# in addition to the main NMI and Watchdog channels. SMP NMI IPIs use this -# facility. -# -############################################################################### -ENTRY(nmi_handler) - add -4,sp - mov d0,(sp) - mov (TBR),d0 - -#ifdef CONFIG_SMP - add -4,sp - mov d0,(sp) # save d0(TBR) - movhu (NMIAGR),d0 - and NMIAGR_GN,d0 - lsr 0x2,d0 - cmp CALL_FUNCTION_NMI_IPI,d0 - bne nmi_not_smp_callfunc # if not call function, jump - - # function call nmi ipi - add 4,sp # no need to store TBR - mov GxICR_DETECT,d0 # clear NMI request - movbu d0,(GxICR(CALL_FUNCTION_NMI_IPI)) - movhu (GxICR(CALL_FUNCTION_NMI_IPI)),d0 - and ~EPSW_NMID,epsw # enable NMI - - mov (sp),d0 # restore d0 - SAVE_ALL - call smp_nmi_call_function_interrupt[],0 - RESTORE_ALL - -nmi_not_smp_callfunc: -#ifdef CONFIG_KERNEL_DEBUGGER - cmp DEBUGGER_NMI_IPI,d0 - bne nmi_not_debugger # if not kernel debugger NMI IPI, jump - - # kernel debugger NMI IPI - add 4,sp # no need to store TBR - mov GxICR_DETECT,d0 # clear NMI - movbu d0,(GxICR(DEBUGGER_NMI_IPI)) - movhu (GxICR(DEBUGGER_NMI_IPI)),d0 - and ~EPSW_NMID,epsw # enable NMI - - mov (sp),d0 - SAVE_ALL - mov fp,d0 # arg 0: stacked register file - mov a2,d1 # arg 1: exception number - call debugger_nmi_interrupt[],0 - RESTORE_ALL - -nmi_not_debugger: -#endif /* CONFIG_KERNEL_DEBUGGER */ - mov (sp),d0 # restore TBR to d0 - add 4,sp -#endif /* CONFIG_SMP */ - - bra __common_exception_nonmi - -############################################################################### -# -# General exception entry point -# -############################################################################### -ENTRY(__common_exception) - add -4,sp - mov d0,(sp) -#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) - mov (MMUCTR),d0 - mov d0,(MMUCTR) -#endif - -__common_exception_aux: - mov (TBR),d0 - and ~EPSW_NMID,epsw # turn NMIs back on if not NMI - or EPSW_IE,epsw - -__common_exception_nonmi: - and 0x0000FFFF,d0 # turn the exception code into a vector - # table index - - btst 0x00000007,d0 - bne 1f - cmp 0x00000400,d0 - bge 1f - - SAVE_ALL # build the stack frame - - mov (REG_D0,fp),a2 # get the exception number - mov (REG_ORIG_D0,fp),d0 - mov d0,(REG_D0,fp) - mov -1,d0 - mov d0,(REG_ORIG_D0,fp) - -#ifdef CONFIG_GDBSTUB -#ifdef CONFIG_SMP - call gdbstub_busy_check[],0 - and d0,d0 # check return value - beq 2f -#else /* CONFIG_SMP */ - btst 0x01,(gdbstub_busy) - beq 2f -#endif /* CONFIG_SMP */ - and ~EPSW_IE,epsw - mov fp,d0 - mov a2,d1 - call gdbstub_exception[],0 # gdbstub itself caused an exception - bra restore_all -2: -#endif /* CONFIG_GDBSTUB */ - - mov fp,d0 # arg 0: stacked register file - mov a2,d1 # arg 1: exception number - lsr 1,a2 - - mov (exception_table,a2),a2 - calls (a2) - jmp ret_from_exception - -1: pi # BUG() equivalent - -############################################################################### -# -# Exception handler functions table -# -############################################################################### - .data -ENTRY(exception_table) - .rept 0x400>>1 - .long uninitialised_exception - .endr - .previous - -############################################################################### -# -# Change an entry in the exception table -# - D0 exception code, D1 handler -# -############################################################################### -ENTRY(set_excp_vector) - lsr 1,d0 - add exception_table,d0 - mov d1,(d0) - mov 4,d1 - ret [],0 - -############################################################################### -# -# System call table -# -############################################################################### - .data -ENTRY(sys_call_table) - .long sys_restart_syscall /* 0 */ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_lchown16 - .long sys_ni_syscall /* old break syscall holder */ - .long sys_stat - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_setuid16 - .long sys_getuid16 - .long sys_stime /* 25 */ - .long sys_ptrace - .long sys_alarm - .long sys_fstat - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ - .long sys_access - .long sys_nice - .long sys_ni_syscall /* 35 - old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_setgid16 - .long sys_getgid16 - .long sys_signal - .long sys_geteuid16 - .long sys_getegid16 /* 50 */ - .long sys_acct - .long sys_umount /* recycled never used phys() */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* old sys_olduname */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_sigaction - .long sys_sgetmask - .long sys_ssetmask - .long sys_setreuid16 /* 70 */ - .long sys_setregid16 - .long sys_sigsuspend - .long sys_sigpending - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_old_getrlimit - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_getgroups16 /* 80 */ - .long sys_setgroups16 - .long sys_old_select - .long sys_symlink - .long sys_lstat - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long sys_old_readdir - .long old_mmap /* 90 */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_fchown16 /* 95 */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm */ - .long sys_socketcall - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_ni_syscall /* old sys_uname */ - .long sys_ni_syscall /* 110 - iopl */ - .long sys_vhangup - .long sys_ni_syscall /* old "idle" system call */ - .long sys_ni_syscall /* vm86old */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc - .long sys_fsync - .long sys_sigreturn - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall /* modify_ldt */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130: old "get_kernel_syms" */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* reserved for afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_ni_syscall /* vm86 */ - .long sys_ni_syscall /* Old sys_query_module */ - .long sys_poll - .long sys_ni_syscall /* was nfsservctl */ - .long sys_setresgid16 /* 170 */ - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread64 /* 180 */ - .long sys_pwrite64 - .long sys_chown16 - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* reserved for streams1 */ - .long sys_ni_syscall /* reserved for streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap_pgoff - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - .long sys_getdents64 /* 220 */ - .long sys_fcntl64 - .long sys_ni_syscall /* reserved for TUX */ - .long sys_ni_syscall - .long sys_gettid - .long sys_readahead /* 225 */ - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr /* 230 */ - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr /* 235 */ - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_tkill - .long sys_sendfile64 - .long sys_futex /* 240 */ - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_ni_syscall /* sys_set_thread_area */ - .long sys_ni_syscall /* sys_get_thread_area */ - .long sys_io_setup /* 245 */ - .long sys_io_destroy - .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 /* 250 */ - .long sys_ni_syscall - .long sys_exit_group - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl /* 255 */ - .long sys_epoll_wait - .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ - .long sys_utimes - .long sys_fadvise64_64 - .long sys_ni_syscall /* sys_vserver */ - .long sys_mbind - .long sys_get_mempolicy /* 275 */ - .long sys_set_mempolicy - .long sys_mq_open - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive /* 280 */ - .long sys_mq_notify - .long sys_mq_getsetattr - .long sys_kexec_load - .long sys_waitid - .long sys_ni_syscall /* 285 */ /* available */ - .long sys_add_key - .long sys_request_key - .long sys_keyctl - .long sys_cacheflush - .long sys_ioprio_set /* 290 */ - .long sys_ioprio_get - .long sys_inotify_init - .long sys_inotify_add_watch - .long sys_inotify_rm_watch - .long sys_migrate_pages /* 295 */ - .long sys_openat - .long sys_mkdirat - .long sys_mknodat - .long sys_fchownat - .long sys_futimesat /* 300 */ - .long sys_fstatat64 - .long sys_unlinkat - .long sys_renameat - .long sys_linkat - .long sys_symlinkat /* 305 */ - .long sys_readlinkat - .long sys_fchmodat - .long sys_faccessat - .long sys_pselect6 - .long sys_ppoll /* 310 */ - .long sys_unshare - .long sys_set_robust_list - .long sys_get_robust_list - .long sys_splice - .long sys_sync_file_range /* 315 */ - .long sys_tee - .long sys_vmsplice - .long sys_move_pages - .long sys_getcpu - .long sys_epoll_pwait /* 320 */ - .long sys_utimensat - .long sys_signalfd - .long sys_timerfd_create - .long sys_eventfd - .long sys_fallocate /* 325 */ - .long sys_timerfd_settime - .long sys_timerfd_gettime - .long sys_signalfd4 - .long sys_eventfd2 - .long sys_epoll_create1 /* 330 */ - .long sys_dup3 - .long sys_pipe2 - .long sys_inotify_init1 - .long sys_preadv - .long sys_pwritev /* 335 */ - .long sys_rt_tgsigqueueinfo - .long sys_perf_event_open - .long sys_recvmmsg - .long sys_setns - - -nr_syscalls=(.-sys_call_table)/4 diff --git a/arch/mn10300/kernel/fpu-low.S b/arch/mn10300/kernel/fpu-low.S deleted file mode 100644 index 78df25cfae29..000000000000 --- a/arch/mn10300/kernel/fpu-low.S +++ /dev/null @@ -1,258 +0,0 @@ -/* MN10300 Low level FPU management operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include - -.macro FPU_INIT_STATE_ALL - fmov 0,fs0 - fmov fs0,fs1 - fmov fs0,fs2 - fmov fs0,fs3 - fmov fs0,fs4 - fmov fs0,fs5 - fmov fs0,fs6 - fmov fs0,fs7 - fmov fs0,fs8 - fmov fs0,fs9 - fmov fs0,fs10 - fmov fs0,fs11 - fmov fs0,fs12 - fmov fs0,fs13 - fmov fs0,fs14 - fmov fs0,fs15 - fmov fs0,fs16 - fmov fs0,fs17 - fmov fs0,fs18 - fmov fs0,fs19 - fmov fs0,fs20 - fmov fs0,fs21 - fmov fs0,fs22 - fmov fs0,fs23 - fmov fs0,fs24 - fmov fs0,fs25 - fmov fs0,fs26 - fmov fs0,fs27 - fmov fs0,fs28 - fmov fs0,fs29 - fmov fs0,fs30 - fmov fs0,fs31 - fmov FPCR_INIT,fpcr -.endm - -.macro FPU_SAVE_ALL areg,dreg - fmov fs0,(\areg+) - fmov fs1,(\areg+) - fmov fs2,(\areg+) - fmov fs3,(\areg+) - fmov fs4,(\areg+) - fmov fs5,(\areg+) - fmov fs6,(\areg+) - fmov fs7,(\areg+) - fmov fs8,(\areg+) - fmov fs9,(\areg+) - fmov fs10,(\areg+) - fmov fs11,(\areg+) - fmov fs12,(\areg+) - fmov fs13,(\areg+) - fmov fs14,(\areg+) - fmov fs15,(\areg+) - fmov fs16,(\areg+) - fmov fs17,(\areg+) - fmov fs18,(\areg+) - fmov fs19,(\areg+) - fmov fs20,(\areg+) - fmov fs21,(\areg+) - fmov fs22,(\areg+) - fmov fs23,(\areg+) - fmov fs24,(\areg+) - fmov fs25,(\areg+) - fmov fs26,(\areg+) - fmov fs27,(\areg+) - fmov fs28,(\areg+) - fmov fs29,(\areg+) - fmov fs30,(\areg+) - fmov fs31,(\areg+) - fmov fpcr,\dreg - mov \dreg,(\areg) -.endm - -.macro FPU_RESTORE_ALL areg,dreg - fmov (\areg+),fs0 - fmov (\areg+),fs1 - fmov (\areg+),fs2 - fmov (\areg+),fs3 - fmov (\areg+),fs4 - fmov (\areg+),fs5 - fmov (\areg+),fs6 - fmov (\areg+),fs7 - fmov (\areg+),fs8 - fmov (\areg+),fs9 - fmov (\areg+),fs10 - fmov (\areg+),fs11 - fmov (\areg+),fs12 - fmov (\areg+),fs13 - fmov (\areg+),fs14 - fmov (\areg+),fs15 - fmov (\areg+),fs16 - fmov (\areg+),fs17 - fmov (\areg+),fs18 - fmov (\areg+),fs19 - fmov (\areg+),fs20 - fmov (\areg+),fs21 - fmov (\areg+),fs22 - fmov (\areg+),fs23 - fmov (\areg+),fs24 - fmov (\areg+),fs25 - fmov (\areg+),fs26 - fmov (\areg+),fs27 - fmov (\areg+),fs28 - fmov (\areg+),fs29 - fmov (\areg+),fs30 - fmov (\areg+),fs31 - mov (\areg),\dreg - fmov \dreg,fpcr -.endm - -############################################################################### -# -# void fpu_init_state(void) -# - initialise the FPU -# -############################################################################### - .globl fpu_init_state - .type fpu_init_state,@function -fpu_init_state: - mov epsw,d0 - or EPSW_FE,epsw - -#ifdef CONFIG_MN10300_PROC_MN103E010 - nop - nop - nop -#endif - FPU_INIT_STATE_ALL -#ifdef CONFIG_MN10300_PROC_MN103E010 - nop - nop - nop -#endif - mov d0,epsw - ret [],0 - - .size fpu_init_state,.-fpu_init_state - -############################################################################### -# -# void fpu_save(struct fpu_state_struct *) -# - save the fpu state -# - note that an FPU Operational exception might occur during this process -# -############################################################################### - .globl fpu_save - .type fpu_save,@function -fpu_save: - mov epsw,d1 - or EPSW_FE,epsw /* enable the FPU so we can access it */ - -#ifdef CONFIG_MN10300_PROC_MN103E010 - nop - nop -#endif - mov d0,a0 - FPU_SAVE_ALL a0,d0 -#ifdef CONFIG_MN10300_PROC_MN103E010 - nop - nop -#endif - - mov d1,epsw - ret [],0 - - .size fpu_save,.-fpu_save - -############################################################################### -# -# void fpu_disabled(void) -# - handle an exception due to the FPU being disabled -# when CONFIG_FPU is enabled -# -############################################################################### - .type fpu_disabled,@function - .globl fpu_disabled -fpu_disabled: - or EPSW_nAR|EPSW_FE,epsw - nop - nop - nop - - mov sp,a1 - mov (a1),d1 /* get epsw of user context */ - and ~(THREAD_SIZE-1),a1 /* a1: (thread_info *ti) */ - mov (TI_task,a1),a2 /* a2: (task_struct *tsk) */ - btst EPSW_nSL,d1 - beq fpu_used_in_kernel - - or EPSW_FE,d1 - mov d1,(sp) - mov (TASK_THREAD+THREAD_FPU_FLAGS,a2),d1 -#ifndef CONFIG_LAZY_SAVE_FPU - or __THREAD_HAS_FPU,d1 - mov d1,(TASK_THREAD+THREAD_FPU_FLAGS,a2) -#else /* !CONFIG_LAZY_SAVE_FPU */ - mov (fpu_state_owner),a0 - cmp 0,a0 - beq fpu_regs_save_end - - mov (TASK_THREAD+THREAD_UREGS,a0),a1 - add TASK_THREAD+THREAD_FPU_STATE,a0 - FPU_SAVE_ALL a0,d0 - - mov (REG_EPSW,a1),d0 - and ~EPSW_FE,d0 - mov d0,(REG_EPSW,a1) - -fpu_regs_save_end: - mov a2,(fpu_state_owner) -#endif /* !CONFIG_LAZY_SAVE_FPU */ - - btst __THREAD_USING_FPU,d1 - beq fpu_regs_init - add TASK_THREAD+THREAD_FPU_STATE,a2 - FPU_RESTORE_ALL a2,d0 - rti - -fpu_regs_init: - FPU_INIT_STATE_ALL - add TASK_THREAD+THREAD_FPU_FLAGS,a2 - bset __THREAD_USING_FPU,(0,a2) - rti - -fpu_used_in_kernel: - and ~(EPSW_nAR|EPSW_FE),epsw - nop - nop - - add -4,sp - SAVE_ALL - mov -1,d0 - mov d0,(REG_ORIG_D0,fp) - - and ~EPSW_NMID,epsw - - mov fp,d0 - call fpu_disabled_in_kernel[],0 - jmp ret_from_exception - - .size fpu_disabled,.-fpu_disabled diff --git a/arch/mn10300/kernel/fpu-nofpu-low.S b/arch/mn10300/kernel/fpu-nofpu-low.S deleted file mode 100644 index 7ea087a549f4..000000000000 --- a/arch/mn10300/kernel/fpu-nofpu-low.S +++ /dev/null @@ -1,39 +0,0 @@ -/* MN10300 Low level FPU management operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include - -############################################################################### -# -# void fpu_disabled(void) -# - handle an exception due to the FPU being disabled -# when CONFIG_FPU is disabled -# -############################################################################### - .type fpu_disabled,@function - .globl fpu_disabled -fpu_disabled: - add -4,sp - SAVE_ALL - mov -1,d0 - mov d0,(REG_ORIG_D0,fp) - - and ~EPSW_NMID,epsw - - mov fp,d0 - call unexpected_fpu_exception[],0 - jmp ret_from_exception - - .size fpu_disabled,.-fpu_disabled diff --git a/arch/mn10300/kernel/fpu-nofpu.c b/arch/mn10300/kernel/fpu-nofpu.c deleted file mode 100644 index 8d0e041aa798..000000000000 --- a/arch/mn10300/kernel/fpu-nofpu.c +++ /dev/null @@ -1,31 +0,0 @@ -/* MN10300 FPU management - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include - -/* - * handle an FPU operational exception - * - there's a possibility that if the FPU is asynchronous, the signal might - * be meant for a process other than the current one - */ -asmlinkage -void unexpected_fpu_exception(struct pt_regs *regs, enum exception_code code) -{ - panic("An FPU exception was received, but there's no FPU enabled."); -} - -/* - * fill in the FPU structure for a core dump - */ -int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg) -{ - return 0; /* not valid */ -} diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c deleted file mode 100644 index 50ce7b447fed..000000000000 --- a/arch/mn10300/kernel/fpu.c +++ /dev/null @@ -1,177 +0,0 @@ -/* MN10300 FPU management - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include - -#include -#include -#include - -#ifdef CONFIG_LAZY_SAVE_FPU -struct task_struct *fpu_state_owner; -#endif - -/* - * error functions in FPU disabled exception - */ -asmlinkage void fpu_disabled_in_kernel(struct pt_regs *regs) -{ - die_if_no_fixup("An FPU Disabled exception happened in kernel space\n", - regs, EXCEP_FPU_DISABLED); -} - -/* - * handle an FPU operational exception - * - there's a possibility that if the FPU is asynchronous, the signal might - * be meant for a process other than the current one - */ -asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code) -{ - struct task_struct *tsk = current; - siginfo_t info; - u32 fpcr; - - if (!user_mode(regs)) - die_if_no_fixup("An FPU Operation exception happened in" - " kernel space\n", - regs, code); - - if (!is_using_fpu(tsk)) - die_if_no_fixup("An FPU Operation exception happened," - " but the FPU is not in use", - regs, code); - - info.si_signo = SIGFPE; - info.si_errno = 0; - info.si_addr = (void *) tsk->thread.uregs->pc; - info.si_code = FPE_FLTINV; - - unlazy_fpu(tsk); - - fpcr = tsk->thread.fpu_state.fpcr; - - if (fpcr & FPCR_EC_Z) - info.si_code = FPE_FLTDIV; - else if (fpcr & FPCR_EC_O) - info.si_code = FPE_FLTOVF; - else if (fpcr & FPCR_EC_U) - info.si_code = FPE_FLTUND; - else if (fpcr & FPCR_EC_I) - info.si_code = FPE_FLTRES; - - force_sig_info(SIGFPE, &info, tsk); -} - -/* - * save the FPU state to a signal context - */ -int fpu_setup_sigcontext(struct fpucontext *fpucontext) -{ - struct task_struct *tsk = current; - - if (!is_using_fpu(tsk)) - return 0; - - /* transfer the current FPU state to memory and cause fpu_init() to be - * triggered by the next attempted FPU operation by the current - * process. - */ - preempt_disable(); - -#ifndef CONFIG_LAZY_SAVE_FPU - if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { - fpu_save(&tsk->thread.fpu_state); - tsk->thread.uregs->epsw &= ~EPSW_FE; - tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; - } -#else /* !CONFIG_LAZY_SAVE_FPU */ - if (fpu_state_owner == tsk) { - fpu_save(&tsk->thread.fpu_state); - fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE; - fpu_state_owner = NULL; - } -#endif /* !CONFIG_LAZY_SAVE_FPU */ - - preempt_enable(); - - /* we no longer have a valid current FPU state */ - clear_using_fpu(tsk); - - /* transfer the saved FPU state onto the userspace stack */ - if (copy_to_user(fpucontext, - &tsk->thread.fpu_state, - min(sizeof(struct fpu_state_struct), - sizeof(struct fpucontext)))) - return -1; - - return 1; -} - -/* - * kill a process's FPU state during restoration after signal handling - */ -void fpu_kill_state(struct task_struct *tsk) -{ - /* disown anything left in the FPU */ - preempt_disable(); - -#ifndef CONFIG_LAZY_SAVE_FPU - if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { - tsk->thread.uregs->epsw &= ~EPSW_FE; - tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; - } -#else /* !CONFIG_LAZY_SAVE_FPU */ - if (fpu_state_owner == tsk) { - fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE; - fpu_state_owner = NULL; - } -#endif /* !CONFIG_LAZY_SAVE_FPU */ - - preempt_enable(); - - /* we no longer have a valid current FPU state */ - clear_using_fpu(tsk); -} - -/* - * restore the FPU state from a signal context - */ -int fpu_restore_sigcontext(struct fpucontext *fpucontext) -{ - struct task_struct *tsk = current; - int ret; - - /* load up the old FPU state */ - ret = copy_from_user(&tsk->thread.fpu_state, fpucontext, - min(sizeof(struct fpu_state_struct), - sizeof(struct fpucontext))); - if (!ret) - set_using_fpu(tsk); - - return ret; -} - -/* - * fill in the FPU structure for a core dump - */ -int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg) -{ - struct task_struct *tsk = current; - int fpvalid; - - fpvalid = is_using_fpu(tsk); - if (fpvalid) { - unlazy_fpu(tsk); - memcpy(fpreg, &tsk->thread.fpu_state, sizeof(*fpreg)); - } - - return fpvalid; -} diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S deleted file mode 100644 index b1d0152e96cb..000000000000 --- a/arch/mn10300/kernel/gdb-io-serial-low.S +++ /dev/null @@ -1,91 +0,0 @@ -############################################################################### -# -# 16550 serial Rx interrupt handler for gdbstub I/O -# -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#include -#include -#include -#include -#include - - .text - -############################################################################### -# -# GDB stub serial receive interrupt entry point -# - intended to run at interrupt priority 0 -# -############################################################################### - .globl gdbstub_io_rx_handler - .type gdbstub_io_rx_handler,@function -gdbstub_io_rx_handler: - movm [d2,d3,a2,a3],(sp) - -#if 1 - movbu (GDBPORT_SERIAL_IIR),d2 -#endif - - mov (gdbstub_rx_inp),a3 -gdbstub_io_rx_more: - mov a3,a2 - add 2,a3 - and 0x00000fff,a3 - mov (gdbstub_rx_outp),d3 - cmp a3,d3 - beq gdbstub_io_rx_overflow - - movbu (GDBPORT_SERIAL_LSR),d3 - btst UART_LSR_DR,d3 - beq gdbstub_io_rx_done - movbu (GDBPORT_SERIAL_RX),d2 - movbu d3,(gdbstub_rx_buffer+1,a2) - movbu d2,(gdbstub_rx_buffer,a2) - mov a3,(gdbstub_rx_inp) - bra gdbstub_io_rx_more - -gdbstub_io_rx_done: - mov GxICR_DETECT,d2 - movbu d2,(XIRQxICR(GDBPORT_SERIAL_IRQ)) # ACK the interrupt - movhu (XIRQxICR(GDBPORT_SERIAL_IRQ)),d2 # flush - movm (sp),[d2,d3,a2,a3] - bset 0x01,(gdbstub_busy) - beq gdbstub_io_rx_enter - rti - -gdbstub_io_rx_overflow: - bset 0x01,(gdbstub_rx_overflow) - bra gdbstub_io_rx_done - -gdbstub_io_rx_enter: - LOCAL_CHANGE_INTR_MASK_LEVEL(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL+1)) - add -4,sp - SAVE_ALL - - mov 0xffffffff,d0 - mov d0,(REG_ORIG_D0,fp) - mov 0x280,d1 - - mov fp,d0 - call gdbstub_rx_irq[],0 # gdbstub_rx_irq(regs,excep) - - LOCAL_CLI - bclr 0x01,(gdbstub_busy) - - .globl gdbstub_return -gdbstub_return: - RESTORE_ALL - - .size gdbstub_io_rx_handler,.-gdbstub_io_rx_handler diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c deleted file mode 100644 index df51242744cc..000000000000 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ /dev/null @@ -1,174 +0,0 @@ -/* 16550 serial driver for gdbstub I/O - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -/* - * initialise the GDB stub - */ -void gdbstub_io_init(void) -{ - u16 tmp; - - /* set up the serial port */ - GDBPORT_SERIAL_LCR = UART_LCR_WLEN8; /* 1N8 */ - GDBPORT_SERIAL_FCR = (UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - - FLOWCTL_CLEAR(DTR); - FLOWCTL_SET(RTS); - - gdbstub_io_set_baud(115200); - - /* we want to get serial receive interrupts */ - XIRQxICR(GDBPORT_SERIAL_IRQ) = 0; - tmp = XIRQxICR(GDBPORT_SERIAL_IRQ); - -#if CONFIG_GDBSTUB_IRQ_LEVEL == 0 - IVAR0 = EXCEP_IRQ_LEVEL0; -#elif CONFIG_GDBSTUB_IRQ_LEVEL == 1 - IVAR1 = EXCEP_IRQ_LEVEL1; -#elif CONFIG_GDBSTUB_IRQ_LEVEL == 2 - IVAR2 = EXCEP_IRQ_LEVEL2; -#elif CONFIG_GDBSTUB_IRQ_LEVEL == 3 - IVAR3 = EXCEP_IRQ_LEVEL3; -#elif CONFIG_GDBSTUB_IRQ_LEVEL == 4 - IVAR4 = EXCEP_IRQ_LEVEL4; -#elif CONFIG_GDBSTUB_IRQ_LEVEL == 5 - IVAR5 = EXCEP_IRQ_LEVEL5; -#else -#error "Unknown irq level for gdbstub." -#endif - - set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL), - gdbstub_io_rx_handler); - - XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST; - XIRQxICR(GDBPORT_SERIAL_IRQ) = - GxICR_ENABLE | NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL); - tmp = XIRQxICR(GDBPORT_SERIAL_IRQ); - - GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI; - - /* permit level 0 IRQs to take place */ - arch_local_change_intr_mask_level( - NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); -} - -/* - * set up the GDB stub serial port baud rate timers - */ -void gdbstub_io_set_baud(unsigned baud) -{ - unsigned value; - u8 lcr; - - value = 18432000 / 16 / baud; - - lcr = GDBPORT_SERIAL_LCR; - GDBPORT_SERIAL_LCR |= UART_LCR_DLAB; - GDBPORT_SERIAL_DLL = value & 0xff; - GDBPORT_SERIAL_DLM = (value >> 8) & 0xff; - GDBPORT_SERIAL_LCR = lcr; -} - -/* - * wait for a character to come from the debugger - */ -int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) -{ - unsigned ix; - u8 ch, st; -#if defined(CONFIG_MN10300_WD_TIMER) - int cpu; -#endif - - *_ch = 0xff; - - if (gdbstub_rx_unget) { - *_ch = gdbstub_rx_unget; - gdbstub_rx_unget = 0; - return 0; - } - - try_again: - /* pull chars out of the buffer */ - ix = gdbstub_rx_outp; - barrier(); - if (ix == gdbstub_rx_inp) { - if (nonblock) - return -EAGAIN; -#ifdef CONFIG_MN10300_WD_TIMER - for (cpu = 0; cpu < NR_CPUS; cpu++) - watchdog_alert_counter[cpu] = 0; -#endif - goto try_again; - } - - ch = gdbstub_rx_buffer[ix++]; - st = gdbstub_rx_buffer[ix++]; - barrier(); - gdbstub_rx_outp = ix & 0x00000fff; - - if (st & UART_LSR_BI) { - gdbstub_proto("### GDB Rx Break Detected ###\n"); - return -EINTR; - } else if (st & (UART_LSR_FE | UART_LSR_OE | UART_LSR_PE)) { - gdbstub_proto("### GDB Rx Error (st=%02x) ###\n", st); - return -EIO; - } else { - gdbstub_proto("### GDB Rx %02x (st=%02x) ###\n", ch, st); - *_ch = ch & 0x7f; - return 0; - } -} - -/* - * send a character to the debugger - */ -void gdbstub_io_tx_char(unsigned char ch) -{ - FLOWCTL_SET(DTR); - LSR_WAIT_FOR(THRE); - /* FLOWCTL_WAIT_FOR(CTS); */ - - if (ch == 0x0a) { - GDBPORT_SERIAL_TX = 0x0d; - LSR_WAIT_FOR(THRE); - /* FLOWCTL_WAIT_FOR(CTS); */ - } - GDBPORT_SERIAL_TX = ch; - - FLOWCTL_CLEAR(DTR); -} - -/* - * send a character to the debugger - */ -void gdbstub_io_tx_flush(void) -{ - LSR_WAIT_FOR(TEMT); - LSR_WAIT_FOR(THRE); - FLOWCTL_CLEAR(DTR); -} diff --git a/arch/mn10300/kernel/gdb-io-ttysm-low.S b/arch/mn10300/kernel/gdb-io-ttysm-low.S deleted file mode 100644 index 060b7cca735d..000000000000 --- a/arch/mn10300/kernel/gdb-io-ttysm-low.S +++ /dev/null @@ -1,93 +0,0 @@ -############################################################################### -# -# MN10300 On-chip serial Rx interrupt handler for GDB stub I/O -# -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#include -#include -#include -#include -#include "mn10300-serial.h" - - .text - -############################################################################### -# -# GDB stub serial receive interrupt entry point -# - intended to run at interrupt priority 0 -# -############################################################################### - .globl gdbstub_io_rx_handler - .type gdbstub_io_rx_handler,@function -gdbstub_io_rx_handler: - movm [d2,d3,a2,a3],(sp) - - mov (gdbstub_rx_inp),a3 -gdbstub_io_rx_more: - mov a3,a2 - add 2,a3 - and PAGE_SIZE_asm-1,a3 - mov (gdbstub_rx_outp),d3 - cmp a3,d3 - beq gdbstub_io_rx_overflow - - movbu (SCgSTR),d3 - btst SC01STR_RBF,d3 - beq gdbstub_io_rx_done - movbu (SCgRXB),d2 - movbu d3,(gdbstub_rx_buffer+1,a2) - movbu d2,(gdbstub_rx_buffer,a2) - mov a3,(gdbstub_rx_inp) - bra gdbstub_io_rx_more - -gdbstub_io_rx_done: - mov GxICR_DETECT,d2 - movbu d2,(GxICR(SCgRXIRQ)) # ACK the interrupt - movhu (GxICR(SCgRXIRQ)),d2 # flush - - movm (sp),[d2,d3,a2,a3] - bset 0x01,(gdbstub_busy) - beq gdbstub_io_rx_enter - rti - -gdbstub_io_rx_overflow: - bset 0x01,(gdbstub_rx_overflow) - bra gdbstub_io_rx_done - -############################################################################### -# -# debugging interrupt - enter the GDB stub proper -# -############################################################################### -gdbstub_io_rx_enter: - or EPSW_IE|EPSW_IM_1,epsw - add -4,sp - SAVE_ALL - - mov 0xffffffff,d0 - mov d0,(REG_ORIG_D0,fp) - mov 0x280,d1 - - mov fp,d0 - call gdbstub_rx_irq[],0 # gdbstub_io_rx_irq(regs,excep) - - and ~EPSW_IE,epsw - bclr 0x01,(gdbstub_busy) - - .globl gdbstub_return -gdbstub_return: - RESTORE_ALL - - .size gdbstub_io_rx_handler,.-gdbstub_io_rx_handler diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c deleted file mode 100644 index caae8cac9db1..000000000000 --- a/arch/mn10300/kernel/gdb-io-ttysm.c +++ /dev/null @@ -1,303 +0,0 @@ -/* MN10300 On-chip serial driver for gdbstub I/O - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "mn10300-serial.h" - -#if defined(CONFIG_GDBSTUB_ON_TTYSM0) -struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif0; -#elif defined(CONFIG_GDBSTUB_ON_TTYSM1) -struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif1; -#else -struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif2; -#endif - - -/* - * initialise the GDB stub I/O routines - */ -void __init gdbstub_io_init(void) -{ - uint16_t scxctr; - int tmp; - - switch (gdbstub_port->clock_src) { - case MNSCx_CLOCK_SRC_IOCLK: - gdbstub_port->ioclk = MN10300_IOCLK; - break; - -#ifdef MN10300_IOBCLK - case MNSCx_CLOCK_SRC_IOBCLK: - gdbstub_port->ioclk = MN10300_IOBCLK; - break; -#endif - default: - BUG(); - } - - /* set up the serial port */ - gdbstub_io_set_baud(115200); - - /* we want to get serial receive interrupts */ - set_intr_level(gdbstub_port->rx_irq, - NUM2GxICR_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL)); - set_intr_level(gdbstub_port->tx_irq, - NUM2GxICR_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL)); - set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL), - gdbstub_io_rx_handler); - - *gdbstub_port->rx_icr |= GxICR_ENABLE; - tmp = *gdbstub_port->rx_icr; - - /* enable the device */ - scxctr = SC01CTR_CLN_8BIT; /* 1N8 */ - switch (gdbstub_port->div_timer) { - case MNSCx_DIV_TIMER_16BIT: - scxctr |= SC0CTR_CK_TM8UFLOW_8; /* == SC1CTR_CK_TM9UFLOW_8 - == SC2CTR_CK_TM10UFLOW_8 */ - break; - - case MNSCx_DIV_TIMER_8BIT: - scxctr |= SC0CTR_CK_TM2UFLOW_8; - break; - } - - scxctr |= SC01CTR_TXE | SC01CTR_RXE; - - *gdbstub_port->_control = scxctr; - tmp = *gdbstub_port->_control; - - /* permit level 0 IRQs only */ - arch_local_change_intr_mask_level( - NUM2EPSW_IM(CONFIG_DEBUGGER_IRQ_LEVEL + 1)); -} - -/* - * set up the GDB stub serial port baud rate timers - */ -void gdbstub_io_set_baud(unsigned baud) -{ - const unsigned bits = 10; /* 1 [start] + 8 [data] + 0 [parity] + - * 1 [stop] */ - unsigned long ioclk = gdbstub_port->ioclk; - unsigned xdiv, tmp; - uint16_t tmxbr; - uint8_t tmxmd; - - if (!baud) { - baud = 9600; - } else if (baud == 134) { - baud = 269; /* 134 is really 134.5 */ - xdiv = 2; - } - -try_alternative: - xdiv = 1; - - switch (gdbstub_port->div_timer) { - case MNSCx_DIV_TIMER_16BIT: - tmxmd = TM8MD_SRC_IOCLK; - tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 65535) - goto timer_okay; - - tmxmd = TM8MD_SRC_IOCLK_8; - tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 65535) - goto timer_okay; - - tmxmd = TM8MD_SRC_IOCLK_32; - tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 65535) - goto timer_okay; - - break; - - case MNSCx_DIV_TIMER_8BIT: - tmxmd = TM2MD_SRC_IOCLK; - tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 255) - goto timer_okay; - - tmxmd = TM2MD_SRC_IOCLK_8; - tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 255) - goto timer_okay; - - tmxmd = TM2MD_SRC_IOCLK_32; - tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 255) - goto timer_okay; - break; - } - - /* as a last resort, if the quotient is zero, default to 9600 bps */ - baud = 9600; - goto try_alternative; - -timer_okay: - gdbstub_port->uart.timeout = (2 * bits * HZ) / baud; - gdbstub_port->uart.timeout += HZ / 50; - - /* set the timer to produce the required baud rate */ - switch (gdbstub_port->div_timer) { - case MNSCx_DIV_TIMER_16BIT: - *gdbstub_port->_tmxmd = 0; - *gdbstub_port->_tmxbr = tmxbr; - *gdbstub_port->_tmxmd = TM8MD_INIT_COUNTER; - *gdbstub_port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE; - break; - - case MNSCx_DIV_TIMER_8BIT: - *gdbstub_port->_tmxmd = 0; - *(volatile u8 *) gdbstub_port->_tmxbr = (u8)tmxbr; - *gdbstub_port->_tmxmd = TM2MD_INIT_COUNTER; - *gdbstub_port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE; - break; - } -} - -/* - * wait for a character to come from the debugger - */ -int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) -{ - unsigned ix; - u8 ch, st; -#if defined(CONFIG_MN10300_WD_TIMER) - int cpu; -#endif - - *_ch = 0xff; - - if (gdbstub_rx_unget) { - *_ch = gdbstub_rx_unget; - gdbstub_rx_unget = 0; - return 0; - } - -try_again: - /* pull chars out of the buffer */ - ix = gdbstub_rx_outp; - barrier(); - if (ix == gdbstub_rx_inp) { - if (nonblock) - return -EAGAIN; -#ifdef CONFIG_MN10300_WD_TIMER - for (cpu = 0; cpu < NR_CPUS; cpu++) - watchdog_alert_counter[cpu] = 0; -#endif - goto try_again; - } - - ch = gdbstub_rx_buffer[ix++]; - st = gdbstub_rx_buffer[ix++]; - barrier(); - gdbstub_rx_outp = ix & (PAGE_SIZE - 1); - - st &= SC01STR_RXF | SC01STR_RBF | SC01STR_FEF | SC01STR_PEF | - SC01STR_OEF; - - /* deal with what we've got - * - note that the UART doesn't do BREAK-detection for us - */ - if (st & SC01STR_FEF && ch == 0) { - switch (gdbstub_port->rx_brk) { - case 0: gdbstub_port->rx_brk = 1; goto try_again; - case 1: gdbstub_port->rx_brk = 2; goto try_again; - case 2: - gdbstub_port->rx_brk = 3; - gdbstub_proto("### GDB MNSERIAL Rx Break Detected" - " ###\n"); - return -EINTR; - default: - goto try_again; - } - } else if (st & SC01STR_FEF) { - if (gdbstub_port->rx_brk) - goto try_again; - - gdbstub_proto("### GDB MNSERIAL Framing Error ###\n"); - return -EIO; - } else if (st & SC01STR_OEF) { - if (gdbstub_port->rx_brk) - goto try_again; - - gdbstub_proto("### GDB MNSERIAL Overrun Error ###\n"); - return -EIO; - } else if (st & SC01STR_PEF) { - if (gdbstub_port->rx_brk) - goto try_again; - - gdbstub_proto("### GDB MNSERIAL Parity Error ###\n"); - return -EIO; - } else { - /* look for the tail-end char on a break run */ - if (gdbstub_port->rx_brk == 3) { - switch (ch) { - case 0xFF: - case 0xFE: - case 0xFC: - case 0xF8: - case 0xF0: - case 0xE0: - case 0xC0: - case 0x80: - case 0x00: - gdbstub_port->rx_brk = 0; - goto try_again; - default: - break; - } - } - - gdbstub_port->rx_brk = 0; - gdbstub_io("### GDB Rx %02x (st=%02x) ###\n", ch, st); - *_ch = ch & 0x7f; - return 0; - } -} - -/* - * send a character to the debugger - */ -void gdbstub_io_tx_char(unsigned char ch) -{ - while (*gdbstub_port->_status & SC01STR_TBF) - continue; - - if (ch == 0x0a) { - *(u8 *) gdbstub_port->_txb = 0x0d; - while (*gdbstub_port->_status & SC01STR_TBF) - continue; - } - - *(u8 *) gdbstub_port->_txb = ch; -} - -/* - * flush the transmission buffers - */ -void gdbstub_io_tx_flush(void) -{ - while (*gdbstub_port->_status & (SC01STR_TBF | SC01STR_TXF)) - continue; -} diff --git a/arch/mn10300/kernel/gdb-low.S b/arch/mn10300/kernel/gdb-low.S deleted file mode 100644 index e2725552cd82..000000000000 --- a/arch/mn10300/kernel/gdb-low.S +++ /dev/null @@ -1,115 +0,0 @@ -############################################################################### -# -# MN10300 Low-level gdbstub routines -# -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#include -#include -#include -#include - - .text - -############################################################################### -# -# GDB stub read memory with guard -# - D0 holds the memory address to read -# - D1 holds the address to store the byte into -# -############################################################################### - .globl gdbstub_read_byte_guard - .globl gdbstub_read_byte_cont -ENTRY(gdbstub_read_byte) - mov d0,a0 - mov d1,a1 - clr d0 -gdbstub_read_byte_guard: - movbu (a0),d1 -gdbstub_read_byte_cont: - movbu d1,(a1) - ret [],0 - - .globl gdbstub_read_word_guard - .globl gdbstub_read_word_cont -ENTRY(gdbstub_read_word) - mov d0,a0 - mov d1,a1 - clr d0 -gdbstub_read_word_guard: - movhu (a0),d1 -gdbstub_read_word_cont: - movhu d1,(a1) - ret [],0 - - .globl gdbstub_read_dword_guard - .globl gdbstub_read_dword_cont -ENTRY(gdbstub_read_dword) - mov d0,a0 - mov d1,a1 - clr d0 -gdbstub_read_dword_guard: - mov (a0),d1 -gdbstub_read_dword_cont: - mov d1,(a1) - ret [],0 - -############################################################################### -# -# GDB stub write memory with guard -# - D0 holds the byte to store -# - D1 holds the memory address to write -# -############################################################################### - .globl gdbstub_write_byte_guard - .globl gdbstub_write_byte_cont -ENTRY(gdbstub_write_byte) - mov d0,a0 - mov d1,a1 - clr d0 -gdbstub_write_byte_guard: - movbu a0,(a1) -gdbstub_write_byte_cont: - ret [],0 - - .globl gdbstub_write_word_guard - .globl gdbstub_write_word_cont -ENTRY(gdbstub_write_word) - mov d0,a0 - mov d1,a1 - clr d0 -gdbstub_write_word_guard: - movhu a0,(a1) -gdbstub_write_word_cont: - ret [],0 - - .globl gdbstub_write_dword_guard - .globl gdbstub_write_dword_cont -ENTRY(gdbstub_write_dword) - mov d0,a0 - mov d1,a1 - clr d0 -gdbstub_write_dword_guard: - mov a0,(a1) -gdbstub_write_dword_cont: - ret [],0 - -############################################################################### -# -# GDB stub BUG() trap -# -############################################################################### -ENTRY(__gdbstub_bug_trap) - .byte 0xF7,0xF7 # don't use 0xFF as the JTAG unit preempts that - ret [],0 diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c deleted file mode 100644 index 3399d5699804..000000000000 --- a/arch/mn10300/kernel/gdb-stub.c +++ /dev/null @@ -1,1924 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* MN10300 GDB stub - * - * Originally written by Glenn Engel, Lake Stevens Instrument Division - * - * Contributed by HP Systems - * - * Modified for SPARC by Stu Grossman, Cygnus Support. - * - * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse - * Send complaints, suggestions etc. to - * - * Copyright (C) 1995 Andreas Busse - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified for Linux/mn10300 by David Howells - */ - -/* - * To enable debugger support, two things need to happen. One, a - * call to set_debug_traps() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This - * is most easily accomplished by a call to breakpoint(). Breakpoint() - * simulates a breakpoint by executing a BREAK instruction. - * - * - * The following gdb commands are supported: - * - * command function Return value - * - * g return the value of the CPU registers hex data or ENN - * G set the value of the CPU registers OK or ENN - * - * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN - * - * c Resume at current address SNN ( signal NN) - * cAA..AA Continue at address AA..AA SNN - * - * s Step one instruction SNN - * sAA..AA Step one instruction from AA..AA SNN - * - * k kill - * - * ? What was the last sigval ? SNN (signal NN) - * - * bBB..BB Set baud rate to BB..BB OK or BNN, then sets - * baud rate - * - * All commands and responses are sent with a packet which includes a - * checksum. A packet consists of - * - * $#. - * - * where - * :: - * :: < two hex digits computed as modulo 256 sum of > - * - * When a packet is received, it is first acknowledged with either '+' or '-'. - * '+' indicates a successful transfer. '-' indicates a failed transfer. - * - * Example: - * - * Host: Reply: - * $m0,10#2a +$00010203040506070809101112131415#42 - * - * - * ============== - * MORE EXAMPLES: - * ============== - * - * For reference -- the following are the steps that one - * company took (RidgeRun Inc) to get remote gdb debugging - * going. In this scenario the host machine was a PC and the - * target platform was a Galileo EVB64120A MIPS evaluation - * board. - * - * Step 1: - * First download gdb-5.0.tar.gz from the internet. - * and then build/install the package. - * - * Example: - * $ tar zxf gdb-5.0.tar.gz - * $ cd gdb-5.0 - * $ ./configure --target=am33_2.0-linux-gnu - * $ make - * $ install - * am33_2.0-linux-gnu-gdb - * - * Step 2: - * Configure linux for remote debugging and build it. - * - * Example: - * $ cd ~/linux - * $ make menuconfig - * $ make dep; make vmlinux - * - * Step 3: - * Download the kernel to the remote target and start - * the kernel running. It will promptly halt and wait - * for the host gdb session to connect. It does this - * since the "Kernel Hacking" option has defined - * CONFIG_REMOTE_DEBUG which in turn enables your calls - * to: - * set_debug_traps(); - * breakpoint(); - * - * Step 4: - * Start the gdb session on the host. - * - * Example: - * $ am33_2.0-linux-gnu-gdb vmlinux - * (gdb) set remotebaud 115200 - * (gdb) target remote /dev/ttyS1 - * ...at this point you are connected to - * the remote target and can use gdb - * in the normal fasion. Setting - * breakpoints, single stepping, - * printing variables, etc. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -/* define to use F7F7 rather than FF which is subverted by JTAG debugger */ -#undef GDBSTUB_USE_F7F7_AS_BREAKPOINT - -/* - * BUFMAX defines the maximum number of characters in inbound/outbound buffers - * at least NUMREGBYTES*2 are needed for register packets - */ -#define BUFMAX 2048 - -static const char gdbstub_banner[] = - "Linux/MN10300 GDB Stub (c) RedHat 2007\n"; - -u8 gdbstub_rx_buffer[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE))); -u32 gdbstub_rx_inp; -u32 gdbstub_rx_outp; -u8 gdbstub_busy; -u8 gdbstub_rx_overflow; -u8 gdbstub_rx_unget; - -static u8 gdbstub_flush_caches; -static char input_buffer[BUFMAX]; -static char output_buffer[BUFMAX]; -static char trans_buffer[BUFMAX]; - -struct gdbstub_bkpt { - u8 *addr; /* address of breakpoint */ - u8 len; /* size of breakpoint */ - u8 origbytes[7]; /* original bytes */ -}; - -static struct gdbstub_bkpt gdbstub_bkpts[256]; - -/* - * local prototypes - */ -static void getpacket(char *buffer); -static int putpacket(char *buffer); -static int computeSignal(enum exception_code excep); -static int hex(unsigned char ch); -static int hexToInt(char **ptr, int *intValue); -static unsigned char *mem2hex(const void *mem, char *buf, int count, - int may_fault); -static const char *hex2mem(const char *buf, void *_mem, int count, - int may_fault); - -/* - * Convert ch from a hex digit to an int - */ -static int hex(unsigned char ch) -{ - if (ch >= 'a' && ch <= 'f') - return ch - 'a' + 10; - if (ch >= '0' && ch <= '9') - return ch - '0'; - if (ch >= 'A' && ch <= 'F') - return ch - 'A' + 10; - return -1; -} - -#ifdef CONFIG_GDBSTUB_DEBUGGING - -void debug_to_serial(const char *p, int n) -{ - __debug_to_serial(p, n); - /* gdbstub_console_write(NULL, p, n); */ -} - -void gdbstub_printk(const char *fmt, ...) -{ - va_list args; - int len; - - /* Emit the output into the temporary buffer */ - va_start(args, fmt); - len = vsnprintf(trans_buffer, sizeof(trans_buffer), fmt, args); - va_end(args); - debug_to_serial(trans_buffer, len); -} - -#endif - -static inline char *gdbstub_strcpy(char *dst, const char *src) -{ - int loop = 0; - while ((dst[loop] = src[loop])) - loop++; - return dst; -} - -/* - * scan for the sequence $# - */ -static void getpacket(char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - unsigned char ch; - int count, i, ret, error; - - for (;;) { - /* - * wait around for the start character, - * ignore all other characters - */ - do { - gdbstub_io_rx_char(&ch, 0); - } while (ch != '$'); - - checksum = 0; - xmitcsum = -1; - count = 0; - error = 0; - - /* - * now, read until a # or end of buffer is found - */ - while (count < BUFMAX) { - ret = gdbstub_io_rx_char(&ch, 0); - if (ret < 0) - error = ret; - - if (ch == '#') - break; - checksum += ch; - buffer[count] = ch; - count++; - } - - if (error == -EIO) { - gdbstub_proto("### GDB Rx Error - Skipping packet" - " ###\n"); - gdbstub_proto("### GDB Tx NAK\n"); - gdbstub_io_tx_char('-'); - continue; - } - - if (count >= BUFMAX || error) - continue; - - buffer[count] = 0; - - /* read the checksum */ - ret = gdbstub_io_rx_char(&ch, 0); - if (ret < 0) - error = ret; - xmitcsum = hex(ch) << 4; - - ret = gdbstub_io_rx_char(&ch, 0); - if (ret < 0) - error = ret; - xmitcsum |= hex(ch); - - if (error) { - if (error == -EIO) - gdbstub_io("### GDB Rx Error -" - " Skipping packet\n"); - gdbstub_io("### GDB Tx NAK\n"); - gdbstub_io_tx_char('-'); - continue; - } - - /* check the checksum */ - if (checksum != xmitcsum) { - gdbstub_io("### GDB Tx NAK\n"); - gdbstub_io_tx_char('-'); /* failed checksum */ - continue; - } - - gdbstub_proto("### GDB Rx '$%s#%02x' ###\n", buffer, checksum); - gdbstub_io("### GDB Tx ACK\n"); - gdbstub_io_tx_char('+'); /* successful transfer */ - - /* - * if a sequence char is present, - * reply the sequence ID - */ - if (buffer[2] == ':') { - gdbstub_io_tx_char(buffer[0]); - gdbstub_io_tx_char(buffer[1]); - - /* - * remove sequence chars from buffer - */ - count = 0; - while (buffer[count]) - count++; - for (i = 3; i <= count; i++) - buffer[i - 3] = buffer[i]; - } - - break; - } -} - -/* - * send the packet in buffer. - * - return 0 if successfully ACK'd - * - return 1 if abandoned due to new incoming packet - */ -static int putpacket(char *buffer) -{ - unsigned char checksum; - unsigned char ch; - int count; - - /* - * $#. - */ - gdbstub_proto("### GDB Tx $'%s'#?? ###\n", buffer); - - do { - gdbstub_io_tx_char('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count]) != 0) { - gdbstub_io_tx_char(ch); - checksum += ch; - count += 1; - } - - gdbstub_io_tx_char('#'); - gdbstub_io_tx_char(hex_asc_hi(checksum)); - gdbstub_io_tx_char(hex_asc_lo(checksum)); - - } while (gdbstub_io_rx_char(&ch, 0), - ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0), - ch != '-' && ch != '+' && - (gdbstub_io("### GDB Rx ??? %02x\n", ch), 0), - ch != '+' && ch != '$'); - - if (ch == '+') { - gdbstub_io("### GDB Rx ACK\n"); - return 0; - } - - gdbstub_io("### GDB Tx Abandoned\n"); - gdbstub_rx_unget = ch; - return 1; -} - -/* - * While we find nice hex chars, build an int. - * Return number of chars processed. - */ -static int hexToInt(char **ptr, int *intValue) -{ - int numChars = 0; - int hexValue; - - *intValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *intValue = (*intValue << 4) | hexValue; - numChars++; - - (*ptr)++; - } - - return (numChars); -} - -#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP -/* - * We single-step by setting breakpoints. When an exception - * is handled, we need to restore the instructions hoisted - * when the breakpoints were set. - * - * This is where we save the original instructions. - */ -static struct gdb_bp_save { - u8 *addr; - u8 opcode[2]; -} step_bp[2]; - -static const unsigned char gdbstub_insn_sizes[256] = -{ - /* 1 2 3 4 5 6 7 8 9 a b c d e f */ - 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */ - 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */ - 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */ - 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */ - 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */ - 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */ -}; - -static int __gdbstub_mark_bp(u8 *addr, int ix) -{ - /* vmalloc area */ - if (((u8 *) VMALLOC_START <= addr) && (addr < (u8 *) VMALLOC_END)) - goto okay; - /* SRAM, SDRAM */ - if (((u8 *) 0x80000000UL <= addr) && (addr < (u8 *) 0xa0000000UL)) - goto okay; - return 0; - -okay: - if (gdbstub_read_byte(addr + 0, &step_bp[ix].opcode[0]) < 0 || - gdbstub_read_byte(addr + 1, &step_bp[ix].opcode[1]) < 0) - return 0; - - step_bp[ix].addr = addr; - return 1; -} - -static inline void __gdbstub_restore_bp(void) -{ -#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT - if (step_bp[0].addr) { - gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0); - gdbstub_write_byte(step_bp[0].opcode[1], step_bp[0].addr + 1); - } - if (step_bp[1].addr) { - gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0); - gdbstub_write_byte(step_bp[1].opcode[1], step_bp[1].addr + 1); - } -#else - if (step_bp[0].addr) - gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0); - if (step_bp[1].addr) - gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0); -#endif - - gdbstub_flush_caches = 1; - - step_bp[0].addr = NULL; - step_bp[0].opcode[0] = 0; - step_bp[0].opcode[1] = 0; - step_bp[1].addr = NULL; - step_bp[1].opcode[0] = 0; - step_bp[1].opcode[1] = 0; -} - -/* - * emulate single stepping by means of breakpoint instructions - */ -static int gdbstub_single_step(struct pt_regs *regs) -{ - unsigned size; - uint32_t x; - uint8_t cur, *pc, *sp; - - step_bp[0].addr = NULL; - step_bp[0].opcode[0] = 0; - step_bp[0].opcode[1] = 0; - step_bp[1].addr = NULL; - step_bp[1].opcode[0] = 0; - step_bp[1].opcode[1] = 0; - x = 0; - - pc = (u8 *) regs->pc; - sp = (u8 *) (regs + 1); - if (gdbstub_read_byte(pc, &cur) < 0) - return -EFAULT; - - gdbstub_bkpt("Single Step from %p { %02x }\n", pc, cur); - - gdbstub_flush_caches = 1; - - size = gdbstub_insn_sizes[cur]; - if (size > 0) { - if (!__gdbstub_mark_bp(pc + size, 0)) - goto fault; - } else { - switch (cur) { - /* Bxx (d8,PC) */ - case 0xc0 ... 0xca: - if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0) - goto fault; - if (!__gdbstub_mark_bp(pc + 2, 0)) - goto fault; - if ((x < 0 || x > 2) && - !__gdbstub_mark_bp(pc + (s8) x, 1)) - goto fault; - break; - - /* LXX (d8,PC) */ - case 0xd0 ... 0xda: - if (!__gdbstub_mark_bp(pc + 1, 0)) - goto fault; - if (regs->pc != regs->lar && - !__gdbstub_mark_bp((u8 *) regs->lar, 1)) - goto fault; - break; - - /* SETLB - loads the next for bytes into the LIR - * register */ - case 0xdb: - if (!__gdbstub_mark_bp(pc + 1, 0)) - goto fault; - break; - - /* JMP (d16,PC) or CALL (d16,PC) */ - case 0xcc: - case 0xcd: - if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 || - gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0) - goto fault; - if (!__gdbstub_mark_bp(pc + (s16) x, 0)) - goto fault; - break; - - /* JMP (d32,PC) or CALL (d32,PC) */ - case 0xdc: - case 0xdd: - if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 || - gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0 || - gdbstub_read_byte(pc + 3, ((u8 *) &x) + 2) < 0 || - gdbstub_read_byte(pc + 4, ((u8 *) &x) + 3) < 0) - goto fault; - if (!__gdbstub_mark_bp(pc + (s32) x, 0)) - goto fault; - break; - - /* RETF */ - case 0xde: - if (!__gdbstub_mark_bp((u8 *) regs->mdr, 0)) - goto fault; - break; - - /* RET */ - case 0xdf: - if (gdbstub_read_byte(pc + 2, (u8 *) &x) < 0) - goto fault; - sp += (s8)x; - if (gdbstub_read_byte(sp + 0, ((u8 *) &x) + 0) < 0 || - gdbstub_read_byte(sp + 1, ((u8 *) &x) + 1) < 0 || - gdbstub_read_byte(sp + 2, ((u8 *) &x) + 2) < 0 || - gdbstub_read_byte(sp + 3, ((u8 *) &x) + 3) < 0) - goto fault; - if (!__gdbstub_mark_bp((u8 *) x, 0)) - goto fault; - break; - - case 0xf0: - if (gdbstub_read_byte(pc + 1, &cur) < 0) - goto fault; - - if (cur >= 0xf0 && cur <= 0xf7) { - /* JMP (An) / CALLS (An) */ - switch (cur & 3) { - case 0: x = regs->a0; break; - case 1: x = regs->a1; break; - case 2: x = regs->a2; break; - case 3: x = regs->a3; break; - } - if (!__gdbstub_mark_bp((u8 *) x, 0)) - goto fault; - } else if (cur == 0xfc) { - /* RETS */ - if (gdbstub_read_byte( - sp + 0, ((u8 *) &x) + 0) < 0 || - gdbstub_read_byte( - sp + 1, ((u8 *) &x) + 1) < 0 || - gdbstub_read_byte( - sp + 2, ((u8 *) &x) + 2) < 0 || - gdbstub_read_byte( - sp + 3, ((u8 *) &x) + 3) < 0) - goto fault; - if (!__gdbstub_mark_bp((u8 *) x, 0)) - goto fault; - } else if (cur == 0xfd) { - /* RTI */ - if (gdbstub_read_byte( - sp + 4, ((u8 *) &x) + 0) < 0 || - gdbstub_read_byte( - sp + 5, ((u8 *) &x) + 1) < 0 || - gdbstub_read_byte( - sp + 6, ((u8 *) &x) + 2) < 0 || - gdbstub_read_byte( - sp + 7, ((u8 *) &x) + 3) < 0) - goto fault; - if (!__gdbstub_mark_bp((u8 *) x, 0)) - goto fault; - } else { - if (!__gdbstub_mark_bp(pc + 2, 0)) - goto fault; - } - - break; - - /* potential 3-byte conditional branches */ - case 0xf8: - if (gdbstub_read_byte(pc + 1, &cur) < 0) - goto fault; - if (!__gdbstub_mark_bp(pc + 3, 0)) - goto fault; - - if (cur >= 0xe8 && cur <= 0xeb) { - if (gdbstub_read_byte( - pc + 2, ((u8 *) &x) + 0) < 0) - goto fault; - if ((x < 0 || x > 3) && - !__gdbstub_mark_bp(pc + (s8) x, 1)) - goto fault; - } - break; - - case 0xfa: - if (gdbstub_read_byte(pc + 1, &cur) < 0) - goto fault; - - if (cur == 0xff) { - /* CALLS (d16,PC) */ - if (gdbstub_read_byte( - pc + 2, ((u8 *) &x) + 0) < 0 || - gdbstub_read_byte( - pc + 3, ((u8 *) &x) + 1) < 0) - goto fault; - if (!__gdbstub_mark_bp(pc + (s16) x, 0)) - goto fault; - } else { - if (!__gdbstub_mark_bp(pc + 4, 0)) - goto fault; - } - break; - - case 0xfc: - if (gdbstub_read_byte(pc + 1, &cur) < 0) - goto fault; - if (cur == 0xff) { - /* CALLS (d32,PC) */ - if (gdbstub_read_byte( - pc + 2, ((u8 *) &x) + 0) < 0 || - gdbstub_read_byte( - pc + 3, ((u8 *) &x) + 1) < 0 || - gdbstub_read_byte( - pc + 4, ((u8 *) &x) + 2) < 0 || - gdbstub_read_byte( - pc + 5, ((u8 *) &x) + 3) < 0) - goto fault; - if (!__gdbstub_mark_bp( - pc + (s32) x, 0)) - goto fault; - } else { - if (!__gdbstub_mark_bp( - pc + 6, 0)) - goto fault; - } - break; - - } - } - - gdbstub_bkpt("Step: %02x at %p; %02x at %p\n", - step_bp[0].opcode[0], step_bp[0].addr, - step_bp[1].opcode[0], step_bp[1].addr); - - if (step_bp[0].addr) { -#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT - if (gdbstub_write_byte(0xF7, step_bp[0].addr + 0) < 0 || - gdbstub_write_byte(0xF7, step_bp[0].addr + 1) < 0) - goto fault; -#else - if (gdbstub_write_byte(0xFF, step_bp[0].addr + 0) < 0) - goto fault; -#endif - } - - if (step_bp[1].addr) { -#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT - if (gdbstub_write_byte(0xF7, step_bp[1].addr + 0) < 0 || - gdbstub_write_byte(0xF7, step_bp[1].addr + 1) < 0) - goto fault; -#else - if (gdbstub_write_byte(0xFF, step_bp[1].addr + 0) < 0) - goto fault; -#endif - } - - return 0; - - fault: - /* uh-oh - silly address alert, try and restore things */ - __gdbstub_restore_bp(); - return -EFAULT; -} -#endif /* CONFIG_GDBSTUB_ALLOW_SINGLE_STEP */ - -#ifdef CONFIG_GDBSTUB_CONSOLE - -void gdbstub_console_write(struct console *con, const char *p, unsigned n) -{ - static const char gdbstub_cr[] = { 0x0d }; - char outbuf[26]; - int qty; - u8 busy; - - busy = gdbstub_busy; - gdbstub_busy = 1; - - outbuf[0] = 'O'; - - while (n > 0) { - qty = 1; - - while (n > 0 && qty < 20) { - mem2hex(p, outbuf + qty, 2, 0); - qty += 2; - if (*p == 0x0a) { - mem2hex(gdbstub_cr, outbuf + qty, 2, 0); - qty += 2; - } - p++; - n--; - } - - outbuf[qty] = 0; - putpacket(outbuf); - } - - gdbstub_busy = busy; -} - -static kdev_t gdbstub_console_dev(struct console *con) -{ - return MKDEV(1, 3); /* /dev/null */ -} - -static struct console gdbstub_console = { - .name = "gdb", - .write = gdbstub_console_write, - .device = gdbstub_console_dev, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -#endif - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * - if successful, return a pointer to the last char put in buf (NUL) - * - in case of mem fault, return NULL - * may_fault is non-zero if we are reading from arbitrary memory, but is - * currently not used. - */ -static -unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) -{ - const u8 *mem = _mem; - u8 ch[4]; - - if ((u32) mem & 1 && count >= 1) { - if (gdbstub_read_byte(mem, ch) != 0) - return 0; - buf = hex_byte_pack(buf, ch[0]); - mem++; - count--; - } - - if ((u32) mem & 3 && count >= 2) { - if (gdbstub_read_word(mem, ch) != 0) - return 0; - buf = hex_byte_pack(buf, ch[0]); - buf = hex_byte_pack(buf, ch[1]); - mem += 2; - count -= 2; - } - - while (count >= 4) { - if (gdbstub_read_dword(mem, ch) != 0) - return 0; - buf = hex_byte_pack(buf, ch[0]); - buf = hex_byte_pack(buf, ch[1]); - buf = hex_byte_pack(buf, ch[2]); - buf = hex_byte_pack(buf, ch[3]); - mem += 4; - count -= 4; - } - - if (count >= 2) { - if (gdbstub_read_word(mem, ch) != 0) - return 0; - buf = hex_byte_pack(buf, ch[0]); - buf = hex_byte_pack(buf, ch[1]); - mem += 2; - count -= 2; - } - - if (count >= 1) { - if (gdbstub_read_byte(mem, ch) != 0) - return 0; - buf = hex_byte_pack(buf, ch[0]); - } - - *buf = 0; - return buf; -} - -/* - * convert the hex array pointed to by buf into binary to be placed in mem - * return a pointer to the character AFTER the last byte written - * may_fault is non-zero if we are reading from arbitrary memory, but is - * currently not used. - */ -static -const char *hex2mem(const char *buf, void *_mem, int count, int may_fault) -{ - u8 *mem = _mem; - union { - u32 val; - u8 b[4]; - } ch; - - if ((u32) mem & 1 && count >= 1) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - if (gdbstub_write_byte(ch.val, mem) != 0) - return 0; - mem++; - count--; - } - - if ((u32) mem & 3 && count >= 2) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - ch.b[1] = hex(*buf++) << 4; - ch.b[1] |= hex(*buf++); - if (gdbstub_write_word(ch.val, mem) != 0) - return 0; - mem += 2; - count -= 2; - } - - while (count >= 4) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - ch.b[1] = hex(*buf++) << 4; - ch.b[1] |= hex(*buf++); - ch.b[2] = hex(*buf++) << 4; - ch.b[2] |= hex(*buf++); - ch.b[3] = hex(*buf++) << 4; - ch.b[3] |= hex(*buf++); - if (gdbstub_write_dword(ch.val, mem) != 0) - return 0; - mem += 4; - count -= 4; - } - - if (count >= 2) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - ch.b[1] = hex(*buf++) << 4; - ch.b[1] |= hex(*buf++); - if (gdbstub_write_word(ch.val, mem) != 0) - return 0; - mem += 2; - count -= 2; - } - - if (count >= 1) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - if (gdbstub_write_byte(ch.val, mem) != 0) - return 0; - } - - return buf; -} - -/* - * This table contains the mapping between MN10300 exception codes, and - * signals, which are primarily what GDB understands. It also indicates - * which hardware traps we need to commandeer when initializing the stub. - */ -static const struct excep_to_sig_map { - enum exception_code excep; /* MN10300 exception code */ - unsigned char signo; /* Signal that we map this into */ -} excep_to_sig_map[] = { - { EXCEP_ITLBMISS, SIGSEGV }, - { EXCEP_DTLBMISS, SIGSEGV }, - { EXCEP_TRAP, SIGTRAP }, - { EXCEP_ISTEP, SIGTRAP }, - { EXCEP_IBREAK, SIGTRAP }, - { EXCEP_OBREAK, SIGTRAP }, - { EXCEP_UNIMPINS, SIGILL }, - { EXCEP_UNIMPEXINS, SIGILL }, - { EXCEP_MEMERR, SIGSEGV }, - { EXCEP_MISALIGN, SIGSEGV }, - { EXCEP_BUSERROR, SIGBUS }, - { EXCEP_ILLINSACC, SIGSEGV }, - { EXCEP_ILLDATACC, SIGSEGV }, - { EXCEP_IOINSACC, SIGSEGV }, - { EXCEP_PRIVINSACC, SIGSEGV }, - { EXCEP_PRIVDATACC, SIGSEGV }, - { EXCEP_FPU_DISABLED, SIGFPE }, - { EXCEP_FPU_UNIMPINS, SIGFPE }, - { EXCEP_FPU_OPERATION, SIGFPE }, - { EXCEP_WDT, SIGALRM }, - { EXCEP_NMI, SIGQUIT }, - { EXCEP_IRQ_LEVEL0, SIGINT }, - { EXCEP_IRQ_LEVEL1, SIGINT }, - { EXCEP_IRQ_LEVEL2, SIGINT }, - { EXCEP_IRQ_LEVEL3, SIGINT }, - { EXCEP_IRQ_LEVEL4, SIGINT }, - { EXCEP_IRQ_LEVEL5, SIGINT }, - { EXCEP_IRQ_LEVEL6, SIGINT }, - { 0, 0} -}; - -/* - * convert the MN10300 exception code into a UNIX signal number - */ -static int computeSignal(enum exception_code excep) -{ - const struct excep_to_sig_map *map; - - for (map = excep_to_sig_map; map->signo; map++) - if (map->excep == excep) - return map->signo; - - return SIGHUP; /* default for things we don't know about */ -} - -static u32 gdbstub_fpcr, gdbstub_fpufs_array[32]; - -/* - * - */ -static void gdbstub_store_fpu(void) -{ -#ifdef CONFIG_FPU - - asm volatile( - "or %2,epsw\n" -#ifdef CONFIG_MN10300_PROC_MN103E010 - "nop\n" - "nop\n" -#endif - "mov %1, a1\n" - "fmov fs0, (a1+)\n" - "fmov fs1, (a1+)\n" - "fmov fs2, (a1+)\n" - "fmov fs3, (a1+)\n" - "fmov fs4, (a1+)\n" - "fmov fs5, (a1+)\n" - "fmov fs6, (a1+)\n" - "fmov fs7, (a1+)\n" - "fmov fs8, (a1+)\n" - "fmov fs9, (a1+)\n" - "fmov fs10, (a1+)\n" - "fmov fs11, (a1+)\n" - "fmov fs12, (a1+)\n" - "fmov fs13, (a1+)\n" - "fmov fs14, (a1+)\n" - "fmov fs15, (a1+)\n" - "fmov fs16, (a1+)\n" - "fmov fs17, (a1+)\n" - "fmov fs18, (a1+)\n" - "fmov fs19, (a1+)\n" - "fmov fs20, (a1+)\n" - "fmov fs21, (a1+)\n" - "fmov fs22, (a1+)\n" - "fmov fs23, (a1+)\n" - "fmov fs24, (a1+)\n" - "fmov fs25, (a1+)\n" - "fmov fs26, (a1+)\n" - "fmov fs27, (a1+)\n" - "fmov fs28, (a1+)\n" - "fmov fs29, (a1+)\n" - "fmov fs30, (a1+)\n" - "fmov fs31, (a1+)\n" - "fmov fpcr, %0\n" - : "=d"(gdbstub_fpcr) - : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE) - : "a1" - ); -#endif -} - -/* - * - */ -static void gdbstub_load_fpu(void) -{ -#ifdef CONFIG_FPU - - asm volatile( - "or %1,epsw\n" -#ifdef CONFIG_MN10300_PROC_MN103E010 - "nop\n" - "nop\n" -#endif - "mov %0, a1\n" - "fmov (a1+), fs0\n" - "fmov (a1+), fs1\n" - "fmov (a1+), fs2\n" - "fmov (a1+), fs3\n" - "fmov (a1+), fs4\n" - "fmov (a1+), fs5\n" - "fmov (a1+), fs6\n" - "fmov (a1+), fs7\n" - "fmov (a1+), fs8\n" - "fmov (a1+), fs9\n" - "fmov (a1+), fs10\n" - "fmov (a1+), fs11\n" - "fmov (a1+), fs12\n" - "fmov (a1+), fs13\n" - "fmov (a1+), fs14\n" - "fmov (a1+), fs15\n" - "fmov (a1+), fs16\n" - "fmov (a1+), fs17\n" - "fmov (a1+), fs18\n" - "fmov (a1+), fs19\n" - "fmov (a1+), fs20\n" - "fmov (a1+), fs21\n" - "fmov (a1+), fs22\n" - "fmov (a1+), fs23\n" - "fmov (a1+), fs24\n" - "fmov (a1+), fs25\n" - "fmov (a1+), fs26\n" - "fmov (a1+), fs27\n" - "fmov (a1+), fs28\n" - "fmov (a1+), fs29\n" - "fmov (a1+), fs30\n" - "fmov (a1+), fs31\n" - "fmov %2, fpcr\n" - : - : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE), "d"(gdbstub_fpcr) - : "a1" - ); -#endif -} - -/* - * set a software breakpoint - */ -int gdbstub_set_breakpoint(u8 *addr, int len) -{ - int bkpt, loop, xloop; - -#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT - len = (len + 1) & ~1; -#endif - - gdbstub_bkpt("setbkpt(%p,%d)\n", addr, len); - - for (bkpt = 255; bkpt >= 0; bkpt--) - if (!gdbstub_bkpts[bkpt].addr) - break; - if (bkpt < 0) - return -ENOSPC; - - for (loop = 0; loop < len; loop++) - if (gdbstub_read_byte(&addr[loop], - &gdbstub_bkpts[bkpt].origbytes[loop] - ) < 0) - return -EFAULT; - - gdbstub_flush_caches = 1; - -#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT - for (loop = 0; loop < len; loop++) - if (gdbstub_write_byte(0xF7, &addr[loop]) < 0) - goto restore; -#else - for (loop = 0; loop < len; loop++) - if (gdbstub_write_byte(0xFF, &addr[loop]) < 0) - goto restore; -#endif - - gdbstub_bkpts[bkpt].addr = addr; - gdbstub_bkpts[bkpt].len = len; - - gdbstub_bkpt("Set BKPT[%02x]: %p-%p {%02x%02x%02x%02x%02x%02x%02x}\n", - bkpt, - gdbstub_bkpts[bkpt].addr, - gdbstub_bkpts[bkpt].addr + gdbstub_bkpts[bkpt].len - 1, - gdbstub_bkpts[bkpt].origbytes[0], - gdbstub_bkpts[bkpt].origbytes[1], - gdbstub_bkpts[bkpt].origbytes[2], - gdbstub_bkpts[bkpt].origbytes[3], - gdbstub_bkpts[bkpt].origbytes[4], - gdbstub_bkpts[bkpt].origbytes[5], - gdbstub_bkpts[bkpt].origbytes[6] - ); - - return 0; - -restore: - for (xloop = 0; xloop < loop; xloop++) - gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[xloop], - addr + xloop); - return -EFAULT; -} - -/* - * clear a software breakpoint - */ -int gdbstub_clear_breakpoint(u8 *addr, int len) -{ - int bkpt, loop; - -#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT - len = (len + 1) & ~1; -#endif - - gdbstub_bkpt("clearbkpt(%p,%d)\n", addr, len); - - for (bkpt = 255; bkpt >= 0; bkpt--) - if (gdbstub_bkpts[bkpt].addr == addr && - gdbstub_bkpts[bkpt].len == len) - break; - if (bkpt < 0) - return -ENOENT; - - gdbstub_bkpts[bkpt].addr = NULL; - - gdbstub_flush_caches = 1; - - for (loop = 0; loop < len; loop++) - if (gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[loop], - addr + loop) < 0) - return -EFAULT; - - return 0; -} - -/* - * This function does all command processing for interfacing to gdb - * - returns 0 if the exception should be skipped, -ERROR otherwise. - */ -static int gdbstub(struct pt_regs *regs, enum exception_code excep) -{ - unsigned long *stack; - unsigned long epsw, mdr; - uint32_t zero, ssp; - uint8_t broke; - char *ptr; - int sigval; - int addr; - int length; - int loop; - - if (excep == EXCEP_FPU_DISABLED) - return -ENOTSUPP; - - gdbstub_flush_caches = 0; - - mn10300_set_gdbleds(1); - - asm volatile("mov mdr,%0" : "=d"(mdr)); - local_save_flags(epsw); - arch_local_change_intr_mask_level( - NUM2EPSW_IM(CONFIG_DEBUGGER_IRQ_LEVEL + 1)); - - gdbstub_store_fpu(); - -#ifdef CONFIG_GDBSTUB_IMMEDIATE - /* skip the initial pause loop */ - if (regs->pc == (unsigned long) __gdbstub_pause) - regs->pc = (unsigned long) start_kernel; -#endif - - /* if we were single stepping, restore the opcodes hoisted for the - * breakpoint[s] */ - broke = 0; -#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP - if ((step_bp[0].addr && step_bp[0].addr == (u8 *) regs->pc) || - (step_bp[1].addr && step_bp[1].addr == (u8 *) regs->pc)) - broke = 1; - - __gdbstub_restore_bp(); -#endif - - if (gdbstub_rx_unget) { - sigval = SIGINT; - if (gdbstub_rx_unget != 3) - goto packet_waiting; - gdbstub_rx_unget = 0; - } - - stack = (unsigned long *) regs->sp; - sigval = broke ? SIGTRAP : computeSignal(excep); - - /* send information about a BUG() */ - if (!user_mode(regs) && excep == EXCEP_SYSCALL15) { - const struct bug_entry *bug; - - bug = find_bug(regs->pc); - if (bug) - goto found_bug; - length = snprintf(trans_buffer, sizeof(trans_buffer), - "BUG() at address %lx\n", regs->pc); - goto send_bug_pkt; - - found_bug: - length = snprintf(trans_buffer, sizeof(trans_buffer), - "BUG() at address %lx (%s:%d)\n", - regs->pc, bug->file, bug->line); - - send_bug_pkt: - ptr = output_buffer; - *ptr++ = 'O'; - ptr = mem2hex(trans_buffer, ptr, length, 0); - *ptr = 0; - putpacket(output_buffer); - - regs->pc -= 2; - sigval = SIGABRT; - } else if (regs->pc == (unsigned long) __gdbstub_bug_trap) { - regs->pc = regs->mdr; - sigval = SIGABRT; - } - - /* - * send a message to the debugger's user saying what happened if it may - * not be clear cut (we can't map exceptions onto signals properly) - */ - if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) { - static const char title[] = "Excep ", tbcberr[] = "BCBERR "; - static const char crlf[] = "\r\n"; - char hx; - u32 bcberr = BCBERR; - - ptr = output_buffer; - *ptr++ = 'O'; - ptr = mem2hex(title, ptr, sizeof(title) - 1, 0); - - hx = hex_asc_hi(excep >> 8); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(excep >> 8); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_hi(excep); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(excep); - ptr = hex_byte_pack(ptr, hx); - - ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); - *ptr = 0; - putpacket(output_buffer); /* send it off... */ - - /* BCBERR */ - ptr = output_buffer; - *ptr++ = 'O'; - ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0); - - hx = hex_asc_hi(bcberr >> 24); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(bcberr >> 24); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_hi(bcberr >> 16); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(bcberr >> 16); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_hi(bcberr >> 8); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(bcberr >> 8); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_hi(bcberr); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(bcberr); - ptr = hex_byte_pack(ptr, hx); - - ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); - *ptr = 0; - putpacket(output_buffer); /* send it off... */ - } - - /* - * tell the debugger that an exception has occurred - */ - ptr = output_buffer; - - /* - * Send trap type (converted to signal) - */ - *ptr++ = 'T'; - ptr = hex_byte_pack(ptr, sigval); - - /* - * Send Error PC - */ - ptr = hex_byte_pack(ptr, GDB_REGID_PC); - *ptr++ = ':'; - ptr = mem2hex(®s->pc, ptr, 4, 0); - *ptr++ = ';'; - - /* - * Send frame pointer - */ - ptr = hex_byte_pack(ptr, GDB_REGID_FP); - *ptr++ = ':'; - ptr = mem2hex(®s->a3, ptr, 4, 0); - *ptr++ = ';'; - - /* - * Send stack pointer - */ - ssp = (unsigned long) (regs + 1); - ptr = hex_byte_pack(ptr, GDB_REGID_SP); - *ptr++ = ':'; - ptr = mem2hex(&ssp, ptr, 4, 0); - *ptr++ = ';'; - - *ptr++ = 0; - putpacket(output_buffer); /* send it off... */ - -packet_waiting: - /* - * Wait for input from remote GDB - */ - while (1) { - output_buffer[0] = 0; - getpacket(input_buffer); - - switch (input_buffer[0]) { - /* request repeat of last signal number */ - case '?': - output_buffer[0] = 'S'; - output_buffer[1] = hex_asc_hi(sigval); - output_buffer[2] = hex_asc_lo(sigval); - output_buffer[3] = 0; - break; - - case 'd': - /* toggle debug flag */ - break; - - /* - * Return the value of the CPU registers - */ - case 'g': - zero = 0; - ssp = (u32) (regs + 1); - ptr = output_buffer; - ptr = mem2hex(®s->d0, ptr, 4, 0); - ptr = mem2hex(®s->d1, ptr, 4, 0); - ptr = mem2hex(®s->d2, ptr, 4, 0); - ptr = mem2hex(®s->d3, ptr, 4, 0); - ptr = mem2hex(®s->a0, ptr, 4, 0); - ptr = mem2hex(®s->a1, ptr, 4, 0); - ptr = mem2hex(®s->a2, ptr, 4, 0); - ptr = mem2hex(®s->a3, ptr, 4, 0); - - ptr = mem2hex(&ssp, ptr, 4, 0); /* 8 */ - ptr = mem2hex(®s->pc, ptr, 4, 0); - ptr = mem2hex(®s->mdr, ptr, 4, 0); - ptr = mem2hex(®s->epsw, ptr, 4, 0); - ptr = mem2hex(®s->lir, ptr, 4, 0); - ptr = mem2hex(®s->lar, ptr, 4, 0); - ptr = mem2hex(®s->mdrq, ptr, 4, 0); - - ptr = mem2hex(®s->e0, ptr, 4, 0); /* 15 */ - ptr = mem2hex(®s->e1, ptr, 4, 0); - ptr = mem2hex(®s->e2, ptr, 4, 0); - ptr = mem2hex(®s->e3, ptr, 4, 0); - ptr = mem2hex(®s->e4, ptr, 4, 0); - ptr = mem2hex(®s->e5, ptr, 4, 0); - ptr = mem2hex(®s->e6, ptr, 4, 0); - ptr = mem2hex(®s->e7, ptr, 4, 0); - - ptr = mem2hex(&ssp, ptr, 4, 0); - ptr = mem2hex(®s, ptr, 4, 0); - ptr = mem2hex(®s->sp, ptr, 4, 0); - ptr = mem2hex(®s->mcrh, ptr, 4, 0); /* 26 */ - ptr = mem2hex(®s->mcrl, ptr, 4, 0); - ptr = mem2hex(®s->mcvf, ptr, 4, 0); - - ptr = mem2hex(&gdbstub_fpcr, ptr, 4, 0); /* 29 - FPCR */ - ptr = mem2hex(&zero, ptr, 4, 0); - ptr = mem2hex(&zero, ptr, 4, 0); - for (loop = 0; loop < 32; loop++) - ptr = mem2hex(&gdbstub_fpufs_array[loop], - ptr, 4, 0); /* 32 - FS0-31 */ - - break; - - /* - * set the value of the CPU registers - return OK - */ - case 'G': - { - const char *ptr; - - ptr = &input_buffer[1]; - ptr = hex2mem(ptr, ®s->d0, 4, 0); - ptr = hex2mem(ptr, ®s->d1, 4, 0); - ptr = hex2mem(ptr, ®s->d2, 4, 0); - ptr = hex2mem(ptr, ®s->d3, 4, 0); - ptr = hex2mem(ptr, ®s->a0, 4, 0); - ptr = hex2mem(ptr, ®s->a1, 4, 0); - ptr = hex2mem(ptr, ®s->a2, 4, 0); - ptr = hex2mem(ptr, ®s->a3, 4, 0); - - ptr = hex2mem(ptr, &ssp, 4, 0); /* 8 */ - ptr = hex2mem(ptr, ®s->pc, 4, 0); - ptr = hex2mem(ptr, ®s->mdr, 4, 0); - ptr = hex2mem(ptr, ®s->epsw, 4, 0); - ptr = hex2mem(ptr, ®s->lir, 4, 0); - ptr = hex2mem(ptr, ®s->lar, 4, 0); - ptr = hex2mem(ptr, ®s->mdrq, 4, 0); - - ptr = hex2mem(ptr, ®s->e0, 4, 0); /* 15 */ - ptr = hex2mem(ptr, ®s->e1, 4, 0); - ptr = hex2mem(ptr, ®s->e2, 4, 0); - ptr = hex2mem(ptr, ®s->e3, 4, 0); - ptr = hex2mem(ptr, ®s->e4, 4, 0); - ptr = hex2mem(ptr, ®s->e5, 4, 0); - ptr = hex2mem(ptr, ®s->e6, 4, 0); - ptr = hex2mem(ptr, ®s->e7, 4, 0); - - ptr = hex2mem(ptr, &ssp, 4, 0); - ptr = hex2mem(ptr, &zero, 4, 0); - ptr = hex2mem(ptr, ®s->sp, 4, 0); - ptr = hex2mem(ptr, ®s->mcrh, 4, 0); /* 26 */ - ptr = hex2mem(ptr, ®s->mcrl, 4, 0); - ptr = hex2mem(ptr, ®s->mcvf, 4, 0); - - ptr = hex2mem(ptr, &zero, 4, 0); /* 29 - FPCR */ - ptr = hex2mem(ptr, &zero, 4, 0); - ptr = hex2mem(ptr, &zero, 4, 0); - for (loop = 0; loop < 32; loop++) /* 32 - FS0-31 */ - ptr = hex2mem(ptr, &zero, 4, 0); - -#if 0 - /* - * See if the stack pointer has moved. If so, then copy - * the saved locals and ins to the new location. - */ - unsigned long *newsp = (unsigned long *) registers[SP]; - if (sp != newsp) - sp = memcpy(newsp, sp, 16 * 4); -#endif - - gdbstub_strcpy(output_buffer, "OK"); - } - break; - - /* - * mAA..AA,LLLL Read LLLL bytes at address AA..AA - */ - case 'm': - ptr = &input_buffer[1]; - - if (hexToInt(&ptr, &addr) && - *ptr++ == ',' && - hexToInt(&ptr, &length) - ) { - if (mem2hex((char *) addr, output_buffer, - length, 1)) - break; - gdbstub_strcpy(output_buffer, "E03"); - } else { - gdbstub_strcpy(output_buffer, "E01"); - } - break; - - /* - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA - * return OK - */ - case 'M': - ptr = &input_buffer[1]; - - if (hexToInt(&ptr, &addr) && - *ptr++ == ',' && - hexToInt(&ptr, &length) && - *ptr++ == ':' - ) { - if (hex2mem(ptr, (char *) addr, length, 1)) - gdbstub_strcpy(output_buffer, "OK"); - else - gdbstub_strcpy(output_buffer, "E03"); - - gdbstub_flush_caches = 1; - } else { - gdbstub_strcpy(output_buffer, "E02"); - } - break; - - /* - * cAA..AA Continue at address AA..AA(optional) - */ - case 'c': - /* try to read optional parameter, pc unchanged if no - * parm */ - - ptr = &input_buffer[1]; - if (hexToInt(&ptr, &addr)) - regs->pc = addr; - goto done; - - /* - * kill the program - */ - case 'k' : - goto done; /* just continue */ - - /* - * Reset the whole machine (FIXME: system dependent) - */ - case 'r': - break; - - /* - * Step to next instruction - */ - case 's': - /* Using the T flag doesn't seem to perform single - * stepping (it seems to wind up being caught by the - * JTAG unit), so we have to use breakpoints and - * continue instead. - */ -#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP - if (gdbstub_single_step(regs) < 0) - /* ignore any fault error for now */ - gdbstub_printk("unable to set single-step" - " bp\n"); - goto done; -#else - gdbstub_strcpy(output_buffer, "E01"); - break; -#endif - - /* - * Set baud rate (bBB) - */ - case 'b': - do { - int baudrate; - - ptr = &input_buffer[1]; - if (!hexToInt(&ptr, &baudrate)) { - gdbstub_strcpy(output_buffer, "B01"); - break; - } - - if (baudrate) { - /* ACK before changing speed */ - putpacket("OK"); - gdbstub_io_set_baud(baudrate); - } - } while (0); - break; - - /* - * Set breakpoint - */ - case 'Z': - ptr = &input_buffer[1]; - - if (!hexToInt(&ptr, &loop) || *ptr++ != ',' || - !hexToInt(&ptr, &addr) || *ptr++ != ',' || - !hexToInt(&ptr, &length) - ) { - gdbstub_strcpy(output_buffer, "E01"); - break; - } - - /* only support software breakpoints */ - gdbstub_strcpy(output_buffer, "E03"); - if (loop != 0 || - length < 1 || - length > 7 || - (unsigned long) addr < 4096) - break; - - if (gdbstub_set_breakpoint((u8 *) addr, length) < 0) - break; - - gdbstub_strcpy(output_buffer, "OK"); - break; - - /* - * Clear breakpoint - */ - case 'z': - ptr = &input_buffer[1]; - - if (!hexToInt(&ptr, &loop) || *ptr++ != ',' || - !hexToInt(&ptr, &addr) || *ptr++ != ',' || - !hexToInt(&ptr, &length) - ) { - gdbstub_strcpy(output_buffer, "E01"); - break; - } - - /* only support software breakpoints */ - gdbstub_strcpy(output_buffer, "E03"); - if (loop != 0 || - length < 1 || - length > 7 || - (unsigned long) addr < 4096) - break; - - if (gdbstub_clear_breakpoint((u8 *) addr, length) < 0) - break; - - gdbstub_strcpy(output_buffer, "OK"); - break; - - default: - gdbstub_proto("### GDB Unsupported Cmd '%s'\n", - input_buffer); - break; - } - - /* reply to the request */ - putpacket(output_buffer); - } - -done: - /* - * Need to flush the instruction cache here, as we may - * have deposited a breakpoint, and the icache probably - * has no way of knowing that a data ref to some location - * may have changed something that is in the instruction - * cache. - * NB: We flush both caches, just to be sure... - */ - if (gdbstub_flush_caches) - debugger_local_cache_flushinv(); - - gdbstub_load_fpu(); - mn10300_set_gdbleds(0); - if (excep == EXCEP_NMI) - NMICR = NMICR_NMIF; - - touch_softlockup_watchdog(); - - local_irq_restore(epsw); - return 0; -} - -/* - * Determine if we hit a debugger special breakpoint that needs skipping over - * automatically. - */ -int at_debugger_breakpoint(struct pt_regs *regs) -{ - return 0; -} - -/* - * handle event interception - */ -asmlinkage int debugger_intercept(enum exception_code excep, - int signo, int si_code, struct pt_regs *regs) -{ - static u8 notfirst = 1; - int ret; - - if (gdbstub_busy) - gdbstub_printk("--> gdbstub reentered itself\n"); - gdbstub_busy = 1; - - if (notfirst) { - unsigned long mdr; - asm("mov mdr,%0" : "=d"(mdr)); - - gdbstub_entry( - "--> debugger_intercept(%p,%04x) [MDR=%lx PC=%lx]\n", - regs, excep, mdr, regs->pc); - - gdbstub_entry( - "PC: %08lx EPSW: %08lx SSP: %08lx mode: %s\n", - regs->pc, regs->epsw, (unsigned long) &ret, - user_mode(regs) ? "User" : "Super"); - gdbstub_entry( - "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", - regs->d0, regs->d1, regs->d2, regs->d3); - gdbstub_entry( - "a0: %08lx a1: %08lx a2: %08lx a3: %08lx\n", - regs->a0, regs->a1, regs->a2, regs->a3); - gdbstub_entry( - "e0: %08lx e1: %08lx e2: %08lx e3: %08lx\n", - regs->e0, regs->e1, regs->e2, regs->e3); - gdbstub_entry( - "e4: %08lx e5: %08lx e6: %08lx e7: %08lx\n", - regs->e4, regs->e5, regs->e6, regs->e7); - gdbstub_entry( - "lar: %08lx lir: %08lx mdr: %08lx usp: %08lx\n", - regs->lar, regs->lir, regs->mdr, regs->sp); - gdbstub_entry( - "cvf: %08lx crl: %08lx crh: %08lx drq: %08lx\n", - regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq); - gdbstub_entry( - "threadinfo=%p task=%p)\n", - current_thread_info(), current); - } else { - notfirst = 1; - } - - ret = gdbstub(regs, excep); - - gdbstub_entry("<-- debugger_intercept()\n"); - gdbstub_busy = 0; - return ret; -} - -/* - * handle the GDB stub itself causing an exception - */ -asmlinkage void gdbstub_exception(struct pt_regs *regs, - enum exception_code excep) -{ - unsigned long mdr; - - asm("mov mdr,%0" : "=d"(mdr)); - gdbstub_entry("--> gdbstub exception({%p},%04x) [MDR=%lx]\n", - regs, excep, mdr); - - while ((unsigned long) regs == 0xffffffff) {} - - /* handle guarded memory accesses where we know it might fault */ - if (regs->pc == (unsigned) gdbstub_read_byte_guard) { - regs->pc = (unsigned) gdbstub_read_byte_cont; - goto fault; - } - - if (regs->pc == (unsigned) gdbstub_read_word_guard) { - regs->pc = (unsigned) gdbstub_read_word_cont; - goto fault; - } - - if (regs->pc == (unsigned) gdbstub_read_dword_guard) { - regs->pc = (unsigned) gdbstub_read_dword_cont; - goto fault; - } - - if (regs->pc == (unsigned) gdbstub_write_byte_guard) { - regs->pc = (unsigned) gdbstub_write_byte_cont; - goto fault; - } - - if (regs->pc == (unsigned) gdbstub_write_word_guard) { - regs->pc = (unsigned) gdbstub_write_word_cont; - goto fault; - } - - if (regs->pc == (unsigned) gdbstub_write_dword_guard) { - regs->pc = (unsigned) gdbstub_write_dword_cont; - goto fault; - } - - gdbstub_printk("\n### GDB stub caused an exception ###\n"); - - /* something went horribly wrong */ - console_verbose(); - show_registers(regs); - - panic("GDB Stub caused an unexpected exception - can't continue\n"); - - /* we caught an attempt by the stub to access silly memory */ -fault: - gdbstub_entry("<-- gdbstub exception() = EFAULT\n"); - regs->d0 = -EFAULT; - return; -} - -/* - * send an exit message to GDB - */ -void gdbstub_exit(int status) -{ - unsigned char checksum; - unsigned char ch; - int count; - - gdbstub_busy = 1; - output_buffer[0] = 'W'; - output_buffer[1] = hex_asc_hi(status); - output_buffer[2] = hex_asc_lo(status); - output_buffer[3] = 0; - - gdbstub_io_tx_char('$'); - checksum = 0; - count = 0; - - while ((ch = output_buffer[count]) != 0) { - gdbstub_io_tx_char(ch); - checksum += ch; - count += 1; - } - - gdbstub_io_tx_char('#'); - gdbstub_io_tx_char(hex_asc_hi(checksum)); - gdbstub_io_tx_char(hex_asc_lo(checksum)); - - /* make sure the output is flushed, or else RedBoot might clobber it */ - gdbstub_io_tx_flush(); - - gdbstub_busy = 0; -} - -/* - * initialise the GDB stub - */ -asmlinkage void __init gdbstub_init(void) -{ -#ifdef CONFIG_GDBSTUB_IMMEDIATE - unsigned char ch; - int ret; -#endif - - gdbstub_busy = 1; - - printk(KERN_INFO "%s", gdbstub_banner); - - gdbstub_io_init(); - - gdbstub_entry("--> gdbstub_init\n"); - - /* try to talk to GDB (or anyone insane enough to want to type GDB - * protocol by hand) */ - gdbstub_io("### GDB Tx ACK\n"); - gdbstub_io_tx_char('+'); /* 'hello world' */ - -#ifdef CONFIG_GDBSTUB_IMMEDIATE - gdbstub_printk("GDB Stub waiting for packet\n"); - - /* in case GDB is started before us, ACK any packets that are already - * sitting there (presumably "$?#xx") - */ - do { gdbstub_io_rx_char(&ch, 0); } while (ch != '$'); - do { gdbstub_io_rx_char(&ch, 0); } while (ch != '#'); - /* eat first csum byte */ - do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0); - /* eat second csum byte */ - do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0); - - gdbstub_io("### GDB Tx NAK\n"); - gdbstub_io_tx_char('-'); /* NAK it */ - -#else - printk("GDB Stub ready\n"); -#endif - - gdbstub_busy = 0; - gdbstub_entry("<-- gdbstub_init\n"); -} - -/* - * register the console at a more appropriate time - */ -#ifdef CONFIG_GDBSTUB_CONSOLE -static int __init gdbstub_postinit(void) -{ - printk(KERN_NOTICE "registering console\n"); - register_console(&gdbstub_console); - return 0; -} - -__initcall(gdbstub_postinit); -#endif - -/* - * handle character reception on GDB serial port - * - jump into the GDB stub if BREAK is detected on the serial line - */ -asmlinkage void gdbstub_rx_irq(struct pt_regs *regs, enum exception_code excep) -{ - char ch; - int ret; - - gdbstub_entry("--> gdbstub_rx_irq\n"); - - do { - ret = gdbstub_io_rx_char(&ch, 1); - if (ret != -EIO && ret != -EAGAIN) { - if (ret != -EINTR) - gdbstub_rx_unget = ch; - gdbstub(regs, excep); - } - } while (ret != -EAGAIN); - - gdbstub_entry("<-- gdbstub_rx_irq\n"); -} diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S deleted file mode 100644 index 0b15f759e0d2..000000000000 --- a/arch/mn10300/kernel/head.S +++ /dev/null @@ -1,442 +0,0 @@ -/* Boot entry point for MN10300 kernel - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SMP -#include -#include -#include -#include -#endif /* CONFIG_SMP */ - - __HEAD - -############################################################################### -# -# bootloader entry point -# -############################################################################### - .globl _start - .type _start,@function -_start: -#ifdef CONFIG_SMP - # - # If this is a secondary CPU (AP), then deal with that elsewhere - # - mov (CPUID),d3 - and CPUID_MASK,d3 - bne startup_secondary - - # - # We're dealing with the primary CPU (BP) here, then. - # Keep BP's D0,D1,D2 register for boot check. - # - - # Set up the Boot IPI for each secondary CPU - mov 0x1,a0 -loop_set_secondary_icr: - mov a0,a1 - asl CROSS_ICR_CPU_SHIFT,a1 - add CROSS_GxICR(SMP_BOOT_IRQ,0),a1 - movhu (a1),d3 - or GxICR_ENABLE|GxICR_LEVEL_0,d3 - movhu d3,(a1) - movhu (a1),d3 # flush - inc a0 - cmp NR_CPUS,a0 - bne loop_set_secondary_icr -#endif /* CONFIG_SMP */ - - # save commandline pointer - mov d0,a3 - - # preload the PGD pointer register - mov swapper_pg_dir,d0 - mov d0,(PTBR) - clr d0 - movbu d0,(PIDR) - - # turn on the TLBs - mov MMUCTR_IIV|MMUCTR_DIV,d0 - mov d0,(MMUCTR) -#ifdef CONFIG_AM34_2 - mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 -#else - mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 -#endif - mov d0,(MMUCTR) - - # turn on AM33v2 exception handling mode and set the trap table base - movhu (CPUP),d0 - or CPUP_EXM_AM33V2,d0 - movhu d0,(CPUP) - mov CONFIG_INTERRUPT_VECTOR_BASE,d0 - mov d0,(TBR) - - # invalidate and enable both of the caches -#ifdef CONFIG_SMP - mov ECHCTR,a0 - clr d0 - mov d0,(a0) -#endif - mov CHCTR,a0 - clr d0 - movhu d0,(a0) # turn off first - mov CHCTR_ICINV|CHCTR_DCINV,d0 - movhu d0,(a0) - setlb - mov (a0),d0 - btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy - lne - -#ifdef CONFIG_MN10300_CACHE_ENABLED -#ifdef CONFIG_MN10300_CACHE_WBACK -#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 -#endif /* NOWRALLOC */ -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 -#endif /* WBACK */ - movhu d0,(a0) # enable -#endif /* ENABLED */ - - # turn on RTS on the debug serial port if applicable -#ifdef CONFIG_MN10300_UNIT_ASB2305 - bset UART_MCR_RTS,(ASB2305_DEBUG_MCR) -#endif - - # clear the BSS area - mov __bss_start,a0 - mov __bss_stop,a1 - clr d0 -bssclear: - cmp a1,a0 - bge bssclear_end - mov d0,(a0) - inc4 a0 - bra bssclear -bssclear_end: - - # retrieve the parameters (including command line) before we overwrite - # them - cmp 0xabadcafe,d1 - bne __no_parameters - -__copy_parameters: - mov redboot_command_line,a0 - mov a0,a1 - add COMMAND_LINE_SIZE,a1 -1: - movbu (a3),d0 - inc a3 - movbu d0,(a0) - inc a0 - cmp a1,a0 - blt 1b - - mov redboot_platform_name,a0 - mov a0,a1 - add COMMAND_LINE_SIZE,a1 - mov d2,a3 -1: - movbu (a3),d0 - inc a3 - movbu d0,(a0) - inc a0 - cmp a1,a0 - blt 1b - -__no_parameters: - - # set up the registers with recognisable rubbish in them - mov init_thread_union+THREAD_SIZE-12,sp - - mov 0xea01eaea,d0 - mov d0,(4,sp) # EPSW save area - mov 0xea02eaea,d0 - mov d0,(8,sp) # PC save area - - mov 0xeb0060ed,d0 - mov d0,mdr - mov 0xeb0061ed,d0 - mov d0,mdrq - mov 0xeb0062ed,d0 - mov d0,mcrh - mov 0xeb0063ed,d0 - mov d0,mcrl - mov 0xeb0064ed,d0 - mov d0,mcvf - mov 0xed0065ed,a3 - mov a3,usp - - mov 0xed00e0ed,e0 - mov 0xed00e1ed,e1 - mov 0xed00e2ed,e2 - mov 0xed00e3ed,e3 - mov 0xed00e4ed,e4 - mov 0xed00e5ed,e5 - mov 0xed00e6ed,e6 - mov 0xed00e7ed,e7 - - mov 0xed00d0ed,d0 - mov 0xed00d1ed,d1 - mov 0xed00d2ed,d2 - mov 0xed00d3ed,d3 - mov 0xed00a0ed,a0 - mov 0xed00a1ed,a1 - mov 0xed00a2ed,a2 - mov 0,a3 - - # set up the initial kernel stack - SAVE_ALL - mov 0xffffffff,d0 - mov d0,(REG_ORIG_D0,fp) - - # put different recognisable rubbish in the regs - mov 0xfb0060ed,d0 - mov d0,mdr - mov 0xfb0061ed,d0 - mov d0,mdrq - mov 0xfb0062ed,d0 - mov d0,mcrh - mov 0xfb0063ed,d0 - mov d0,mcrl - mov 0xfb0064ed,d0 - mov d0,mcvf - mov 0xfd0065ed,a0 - mov a0,usp - - mov 0xfd00e0ed,e0 - mov 0xfd00e1ed,e1 - mov 0xfd00e2ed,e2 - mov 0xfd00e3ed,e3 - mov 0xfd00e4ed,e4 - mov 0xfd00e5ed,e5 - mov 0xfd00e6ed,e6 - mov 0xfd00e7ed,e7 - - mov 0xfd00d0ed,d0 - mov 0xfd00d1ed,d1 - mov 0xfd00d2ed,d2 - mov 0xfd00d3ed,d3 - mov 0xfd00a0ed,a0 - mov 0xfd00a1ed,a1 - mov 0xfd00a2ed,a2 - - # we may be holding current in E2 -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - mov init_task,e2 -#endif - - # initialise the processor and the unit - call processor_init[],0 - call unit_init[],0 - -#ifdef CONFIG_SMP - # mark the primary CPU in cpu_boot_map - mov cpu_boot_map,a0 - mov 0x1,d0 - mov d0,(a0) - - # signal each secondary CPU to begin booting - mov 0x1,d2 # CPU ID - -loop_request_boot_secondary: - mov d2,a0 - # send SMP_BOOT_IPI to secondary CPU - asl CROSS_ICR_CPU_SHIFT,a0 - add CROSS_GxICR(SMP_BOOT_IRQ,0),a0 - movhu (a0),d0 - or GxICR_REQUEST|GxICR_DETECT,d0 - movhu d0,(a0) - movhu (a0),d0 # flush - - # wait up to 100ms for AP's IPI to be received - clr d3 -wait_on_secondary_boot: - mov DELAY_TIME_BOOT_IPI,d0 - call __delay[],0 - inc d3 - mov cpu_boot_map,a0 - mov (a0),d0 - lsr d2,d0 - btst 0x1,d0 - bne 1f - cmp TIME_OUT_COUNT_BOOT_IPI,d3 - bne wait_on_secondary_boot -1: - inc d2 - cmp NR_CPUS,d2 - bne loop_request_boot_secondary -#endif /* CONFIG_SMP */ - -#ifdef CONFIG_GDBSTUB - call gdbstub_init[],0 - -#ifdef CONFIG_GDBSTUB_IMMEDIATE - .globl __gdbstub_pause -__gdbstub_pause: - bra __gdbstub_pause -#endif -#endif - - jmp start_kernel - .size _start,.-_start - -############################################################################### -# -# Secondary CPU boot point -# -############################################################################### -#ifdef CONFIG_SMP -startup_secondary: - # preload the PGD pointer register - mov swapper_pg_dir,d0 - mov d0,(PTBR) - clr d0 - movbu d0,(PIDR) - - # turn on the TLBs - mov MMUCTR_IIV|MMUCTR_DIV,d0 - mov d0,(MMUCTR) -#ifdef CONFIG_AM34_2 - mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 -#else - mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 -#endif - mov d0,(MMUCTR) - - # turn on AM33v2 exception handling mode and set the trap table base - movhu (CPUP),d0 - or CPUP_EXM_AM33V2,d0 - movhu d0,(CPUP) - - # set the interrupt vector table - mov CONFIG_INTERRUPT_VECTOR_BASE,d0 - mov d0,(TBR) - - # invalidate and enable both of the caches - mov ECHCTR,a0 - clr d0 - mov d0,(a0) - mov CHCTR,a0 - clr d0 - movhu d0,(a0) # turn off first - mov CHCTR_ICINV|CHCTR_DCINV,d0 - movhu d0,(a0) - setlb - mov (a0),d0 - btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) - lne - -#ifdef CONFIG_MN10300_CACHE_ENABLED -#ifdef CONFIG_MN10300_CACHE_WBACK -#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 -#endif /* !NOWRALLOC */ -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 -#endif /* WBACK */ - movhu d0,(a0) # enable -#endif /* ENABLED */ - - # Clear the boot IPI interrupt for this CPU - movhu (GxICR(SMP_BOOT_IRQ)),d0 - and ~GxICR_REQUEST,d0 - movhu d0,(GxICR(SMP_BOOT_IRQ)) - movhu (GxICR(SMP_BOOT_IRQ)),d0 # flush - - /* get stack */ - mov CONFIG_INTERRUPT_VECTOR_BASE + CONFIG_BOOT_STACK_OFFSET,a0 - mov (CPUID),d0 - and CPUID_MASK,d0 - mulu CONFIG_BOOT_STACK_SIZE,d0 - sub d0,a0 - mov a0,sp - - # init interrupt for AP - call smp_prepare_cpu_init[],0 - - # mark this secondary CPU in cpu_boot_map - mov (CPUID),d0 - mov 0x1,d1 - asl d0,d1 - mov cpu_boot_map,a0 - bset d1,(a0) - - or EPSW_IE|EPSW_IM_1,epsw # permit level 0 interrupts - nop - nop -#ifdef CONFIG_MN10300_CACHE_WBACK - # flush the local cache if it's in writeback mode - call mn10300_local_dcache_flush_inv[],0 - setlb - mov (CHCTR),d0 - btst CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) - lne -#endif - - # now sleep waiting for further instructions -secondary_sleep: - mov CPUM_SLEEP,d0 - movhu d0,(CPUM) - nop - nop - bra secondary_sleep - .size startup_secondary,.-startup_secondary -#endif /* CONFIG_SMP */ - -############################################################################### -# -# -# -############################################################################### -ENTRY(__head_end) - -/* - * This is initialized to disallow all access to the low 2G region - * - the high 2G region is managed directly by the MMU - * - range 0x70000000-0x7C000000 are initialised for use by VMALLOC - */ - .section .bss - .balign PAGE_SIZE -ENTRY(swapper_pg_dir) - .space PTRS_PER_PGD*4 - -/* - * The page tables are initialized to only 8MB here - the final page - * tables are set up later depending on memory size. - */ - - .balign PAGE_SIZE -ENTRY(empty_zero_page) - .space PAGE_SIZE - - .balign PAGE_SIZE -ENTRY(large_page_table) - .space PAGE_SIZE - - .balign PAGE_SIZE -ENTRY(kernel_vmalloc_ptes) - .space ((VMALLOC_END-VMALLOC_START)/PAGE_SIZE)*4 diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h deleted file mode 100644 index 561785581f6c..000000000000 --- a/arch/mn10300/kernel/internal.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Internal definitions for the arch part of the core kernel - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include - -struct clocksource; -struct clock_event_device; - -/* - * entry.S - */ -extern void ret_from_fork(struct task_struct *) __attribute__((noreturn)); -extern void ret_from_kernel_thread(struct task_struct *) __attribute__((noreturn)); - -/* - * smp-low.S - */ -#ifdef CONFIG_SMP -extern void mn10300_low_ipi_handler(void); -#endif - -/* - * smp.c - */ -#ifdef CONFIG_SMP -extern void smp_jump_to_debugger(void); -#endif - -/* - * time.c - */ -extern irqreturn_t local_timer_interrupt(void); diff --git a/arch/mn10300/kernel/io.c b/arch/mn10300/kernel/io.c deleted file mode 100644 index e96fdf6bb542..000000000000 --- a/arch/mn10300/kernel/io.c +++ /dev/null @@ -1,30 +0,0 @@ -/* MN10300 Misaligned multibyte-word I/O - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include - -/* - * output data from a potentially misaligned buffer - */ -void __outsl(unsigned long addr, const void *buffer, int count) -{ - const unsigned char *buf = buffer; - unsigned long val; - - while (count--) { - memcpy(&val, buf, 4); - outl(val, addr); - buf += 4; - } -} -EXPORT_SYMBOL(__outsl); diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c deleted file mode 100644 index c716437baa2c..000000000000 --- a/arch/mn10300/kernel/irq.c +++ /dev/null @@ -1,356 +0,0 @@ -/* MN10300 Arch-specific interrupt handling - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include - -unsigned long __mn10300_irq_enabled_epsw[NR_CPUS] __cacheline_aligned_in_smp = { - [0 ... NR_CPUS - 1] = EPSW_IE | EPSW_IM_7 -}; -EXPORT_SYMBOL(__mn10300_irq_enabled_epsw); - -#ifdef CONFIG_SMP -static char irq_affinity_online[NR_IRQS] = { - [0 ... NR_IRQS - 1] = 0 -}; - -#define NR_IRQ_WORDS ((NR_IRQS + 31) / 32) -static unsigned long irq_affinity_request[NR_IRQ_WORDS] = { - [0 ... NR_IRQ_WORDS - 1] = 0 -}; -#endif /* CONFIG_SMP */ - -atomic_t irq_err_count; - -/* - * MN10300 interrupt controller operations - */ -static void mn10300_cpupic_ack(struct irq_data *d) -{ - unsigned int irq = d->irq; - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - GxICR_u8(irq) = GxICR_DETECT; - tmp = GxICR(irq); - arch_local_irq_restore(flags); -} - -static void __mask_and_set_icr(unsigned int irq, - unsigned int mask, unsigned int set) -{ - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - tmp = GxICR(irq); - GxICR(irq) = (tmp & mask) | set; - tmp = GxICR(irq); - arch_local_irq_restore(flags); -} - -static void mn10300_cpupic_mask(struct irq_data *d) -{ - __mask_and_set_icr(d->irq, GxICR_LEVEL, 0); -} - -static void mn10300_cpupic_mask_ack(struct irq_data *d) -{ - unsigned int irq = d->irq; -#ifdef CONFIG_SMP - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - - if (!test_and_clear_bit(irq, irq_affinity_request)) { - tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = GxICR(irq); - } else { - u16 tmp2; - tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL); - tmp2 = GxICR(irq); - - irq_affinity_online[irq] = - cpumask_any_and(irq_data_get_affinity_mask(d), - cpu_online_mask); - CROSS_GxICR(irq, irq_affinity_online[irq]) = - (tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT; - tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); - } - - arch_local_irq_restore(flags); -#else /* CONFIG_SMP */ - __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_DETECT); -#endif /* CONFIG_SMP */ -} - -static void mn10300_cpupic_unmask(struct irq_data *d) -{ - __mask_and_set_icr(d->irq, GxICR_LEVEL, GxICR_ENABLE); -} - -static void mn10300_cpupic_unmask_clear(struct irq_data *d) -{ - unsigned int irq = d->irq; - /* the MN10300 PIC latches its interrupt request bit, even after the - * device has ceased to assert its interrupt line and the interrupt - * channel has been disabled in the PIC, so for level-triggered - * interrupts we need to clear the request bit when we re-enable */ -#ifdef CONFIG_SMP - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - - if (!test_and_clear_bit(irq, irq_affinity_request)) { - tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; - tmp = GxICR(irq); - } else { - tmp = GxICR(irq); - - irq_affinity_online[irq] = cpumask_any_and(irq_data_get_affinity_mask(d), - cpu_online_mask); - CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; - tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); - } - - arch_local_irq_restore(flags); -#else /* CONFIG_SMP */ - __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE | GxICR_DETECT); -#endif /* CONFIG_SMP */ -} - -#ifdef CONFIG_SMP -static int -mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask, - bool force) -{ - unsigned long flags; - - flags = arch_local_cli_save(); - set_bit(d->irq, irq_affinity_request); - arch_local_irq_restore(flags); - return 0; -} -#endif /* CONFIG_SMP */ - -/* - * MN10300 PIC level-triggered IRQ handling. - * - * The PIC has no 'ACK' function per se. It is possible to clear individual - * channel latches, but each latch relatches whether or not the channel is - * masked, so we need to clear the latch when we unmask the channel. - * - * Also for this reason, we don't supply an ack() op (it's unused anyway if - * mask_ack() is provided), and mask_ack() just masks. - */ -static struct irq_chip mn10300_cpu_pic_level = { - .name = "cpu_l", - .irq_disable = mn10300_cpupic_mask, - .irq_enable = mn10300_cpupic_unmask_clear, - .irq_ack = NULL, - .irq_mask = mn10300_cpupic_mask, - .irq_mask_ack = mn10300_cpupic_mask, - .irq_unmask = mn10300_cpupic_unmask_clear, -#ifdef CONFIG_SMP - .irq_set_affinity = mn10300_cpupic_setaffinity, -#endif -}; - -/* - * MN10300 PIC edge-triggered IRQ handling. - * - * We use the latch clearing function of the PIC as the 'ACK' function. - */ -static struct irq_chip mn10300_cpu_pic_edge = { - .name = "cpu_e", - .irq_disable = mn10300_cpupic_mask, - .irq_enable = mn10300_cpupic_unmask, - .irq_ack = mn10300_cpupic_ack, - .irq_mask = mn10300_cpupic_mask, - .irq_mask_ack = mn10300_cpupic_mask_ack, - .irq_unmask = mn10300_cpupic_unmask, -#ifdef CONFIG_SMP - .irq_set_affinity = mn10300_cpupic_setaffinity, -#endif -}; - -/* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. - */ -void ack_bad_irq(int irq) -{ - printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq); -} - -/* - * change the level at which an IRQ executes - * - must not be called whilst interrupts are being processed! - */ -void set_intr_level(int irq, u16 level) -{ - BUG_ON(in_interrupt()); - - __mask_and_set_icr(irq, GxICR_ENABLE, level); -} - -/* - * mark an interrupt to be ACK'd after interrupt handlers have been run rather - * than before - */ -void mn10300_set_lateack_irq_type(int irq) -{ - irq_set_chip_and_handler(irq, &mn10300_cpu_pic_level, - handle_level_irq); -} - -/* - * initialise the interrupt system - */ -void __init init_IRQ(void) -{ - int irq; - - for (irq = 0; irq < NR_IRQS; irq++) - if (irq_get_chip(irq) == &no_irq_chip) - /* due to the PIC latching interrupt requests, even - * when the IRQ is disabled, IRQ_PENDING is superfluous - * and we can use handle_level_irq() for edge-triggered - * interrupts */ - irq_set_chip_and_handler(irq, &mn10300_cpu_pic_edge, - handle_level_irq); - - unit_init_IRQ(); -} - -/* - * handle normal device IRQs - */ -asmlinkage void do_IRQ(void) -{ - unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw; - unsigned int cpu_id = smp_processor_id(); - int irq; - - sp = current_stack_pointer(); - BUG_ON(sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN); - - /* make sure local_irq_enable() doesn't muck up the interrupt priority - * setting in EPSW */ - old_irq_enabled_epsw = __mn10300_irq_enabled_epsw[cpu_id]; - local_save_flags(epsw); - __mn10300_irq_enabled_epsw[cpu_id] = EPSW_IE | (EPSW_IM & epsw); - irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL; - -#ifdef CONFIG_MN10300_WD_TIMER - __IRQ_STAT(cpu_id, __irq_count)++; -#endif - - irq_enter(); - - for (;;) { - /* ask the interrupt controller for the next IRQ to process - * - the result we get depends on EPSW.IM - */ - irq = IAGR & IAGR_GN; - if (!irq) - break; - - local_irq_restore(irq_disabled_epsw); - - generic_handle_irq(irq >> 2); - - /* restore IRQ controls for IAGR access */ - local_irq_restore(epsw); - } - - __mn10300_irq_enabled_epsw[cpu_id] = old_irq_enabled_epsw; - - irq_exit(); -} - -/* - * Display interrupt management information through /proc/interrupts - */ -int arch_show_interrupts(struct seq_file *p, int prec) -{ -#ifdef CONFIG_MN10300_WD_TIMER - int j; - - seq_printf(p, "%*s: ", prec, "NMI"); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", nmi_count(j)); - seq_putc(p, '\n'); -#endif - - seq_printf(p, "%*s: ", prec, "ERR"); - seq_printf(p, "%10u\n", atomic_read(&irq_err_count)); - return 0; -} - -#ifdef CONFIG_HOTPLUG_CPU -void migrate_irqs(void) -{ - int irq; - unsigned int self, new; - unsigned long flags; - - self = smp_processor_id(); - for (irq = 0; irq < NR_IRQS; irq++) { - struct irq_data *data = irq_get_irq_data(irq); - struct cpumask *mask = irq_data_get_affinity_mask(data); - - if (irqd_is_per_cpu(data)) - continue; - - if (cpumask_test_cpu(self, mask) && - !cpumask_intersects(&irq_affinity[irq], cpu_online_mask)) { - int cpu_id; - cpu_id = cpumask_first(cpu_online_mask); - cpumask_set_cpu(cpu_id, mask); - } - /* We need to operate irq_affinity_online atomically. */ - arch_local_cli_save(flags); - if (irq_affinity_online[irq] == self) { - u16 x, tmp; - - x = GxICR(irq); - GxICR(irq) = x & GxICR_LEVEL; - tmp = GxICR(irq); - - new = cpumask_any_and(mask, cpu_online_mask); - irq_affinity_online[irq] = new; - - CROSS_GxICR(irq, new) = - (x & GxICR_LEVEL) | GxICR_DETECT; - tmp = CROSS_GxICR(irq, new); - - x &= GxICR_LEVEL | GxICR_ENABLE; - if (GxICR(irq) & GxICR_REQUEST) - x |= GxICR_REQUEST | GxICR_DETECT; - CROSS_GxICR(irq, new) = x; - tmp = CROSS_GxICR(irq, new); - } - arch_local_irq_restore(flags); - } -} -#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mn10300/kernel/kgdb.c b/arch/mn10300/kernel/kgdb.c deleted file mode 100644 index 2d7986c386fe..000000000000 --- a/arch/mn10300/kernel/kgdb.c +++ /dev/null @@ -1,502 +0,0 @@ -/* kgdb support for MN10300 - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "internal.h" - -/* - * Software single-stepping breakpoint save (used by __switch_to()) - */ -static struct thread_info *kgdb_sstep_thread; -u8 *kgdb_sstep_bp_addr[2]; -u8 kgdb_sstep_bp[2]; - -/* - * Copy kernel exception frame registers to the GDB register file - */ -void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) -{ - unsigned long ssp = (unsigned long) (regs + 1); - - gdb_regs[GDB_FR_D0] = regs->d0; - gdb_regs[GDB_FR_D1] = regs->d1; - gdb_regs[GDB_FR_D2] = regs->d2; - gdb_regs[GDB_FR_D3] = regs->d3; - gdb_regs[GDB_FR_A0] = regs->a0; - gdb_regs[GDB_FR_A1] = regs->a1; - gdb_regs[GDB_FR_A2] = regs->a2; - gdb_regs[GDB_FR_A3] = regs->a3; - gdb_regs[GDB_FR_SP] = (regs->epsw & EPSW_nSL) ? regs->sp : ssp; - gdb_regs[GDB_FR_PC] = regs->pc; - gdb_regs[GDB_FR_MDR] = regs->mdr; - gdb_regs[GDB_FR_EPSW] = regs->epsw; - gdb_regs[GDB_FR_LIR] = regs->lir; - gdb_regs[GDB_FR_LAR] = regs->lar; - gdb_regs[GDB_FR_MDRQ] = regs->mdrq; - gdb_regs[GDB_FR_E0] = regs->e0; - gdb_regs[GDB_FR_E1] = regs->e1; - gdb_regs[GDB_FR_E2] = regs->e2; - gdb_regs[GDB_FR_E3] = regs->e3; - gdb_regs[GDB_FR_E4] = regs->e4; - gdb_regs[GDB_FR_E5] = regs->e5; - gdb_regs[GDB_FR_E6] = regs->e6; - gdb_regs[GDB_FR_E7] = regs->e7; - gdb_regs[GDB_FR_SSP] = ssp; - gdb_regs[GDB_FR_MSP] = 0; - gdb_regs[GDB_FR_USP] = regs->sp; - gdb_regs[GDB_FR_MCRH] = regs->mcrh; - gdb_regs[GDB_FR_MCRL] = regs->mcrl; - gdb_regs[GDB_FR_MCVF] = regs->mcvf; - gdb_regs[GDB_FR_DUMMY0] = 0; - gdb_regs[GDB_FR_DUMMY1] = 0; - gdb_regs[GDB_FR_FS0] = 0; -} - -/* - * Extracts kernel SP/PC values understandable by gdb from the values - * saved by switch_to(). - */ -void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) -{ - gdb_regs[GDB_FR_SSP] = p->thread.sp; - gdb_regs[GDB_FR_PC] = p->thread.pc; - gdb_regs[GDB_FR_A3] = p->thread.a3; - gdb_regs[GDB_FR_USP] = p->thread.usp; - gdb_regs[GDB_FR_FPCR] = p->thread.fpu_state.fpcr; -} - -/* - * Fill kernel exception frame registers from the GDB register file - */ -void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) -{ - regs->d0 = gdb_regs[GDB_FR_D0]; - regs->d1 = gdb_regs[GDB_FR_D1]; - regs->d2 = gdb_regs[GDB_FR_D2]; - regs->d3 = gdb_regs[GDB_FR_D3]; - regs->a0 = gdb_regs[GDB_FR_A0]; - regs->a1 = gdb_regs[GDB_FR_A1]; - regs->a2 = gdb_regs[GDB_FR_A2]; - regs->a3 = gdb_regs[GDB_FR_A3]; - regs->sp = gdb_regs[GDB_FR_SP]; - regs->pc = gdb_regs[GDB_FR_PC]; - regs->mdr = gdb_regs[GDB_FR_MDR]; - regs->epsw = gdb_regs[GDB_FR_EPSW]; - regs->lir = gdb_regs[GDB_FR_LIR]; - regs->lar = gdb_regs[GDB_FR_LAR]; - regs->mdrq = gdb_regs[GDB_FR_MDRQ]; - regs->e0 = gdb_regs[GDB_FR_E0]; - regs->e1 = gdb_regs[GDB_FR_E1]; - regs->e2 = gdb_regs[GDB_FR_E2]; - regs->e3 = gdb_regs[GDB_FR_E3]; - regs->e4 = gdb_regs[GDB_FR_E4]; - regs->e5 = gdb_regs[GDB_FR_E5]; - regs->e6 = gdb_regs[GDB_FR_E6]; - regs->e7 = gdb_regs[GDB_FR_E7]; - regs->sp = gdb_regs[GDB_FR_SSP]; - /* gdb_regs[GDB_FR_MSP]; */ - // regs->usp = gdb_regs[GDB_FR_USP]; - regs->mcrh = gdb_regs[GDB_FR_MCRH]; - regs->mcrl = gdb_regs[GDB_FR_MCRL]; - regs->mcvf = gdb_regs[GDB_FR_MCVF]; - /* gdb_regs[GDB_FR_DUMMY0]; */ - /* gdb_regs[GDB_FR_DUMMY1]; */ - - // regs->fpcr = gdb_regs[GDB_FR_FPCR]; - // regs->fs0 = gdb_regs[GDB_FR_FS0]; -} - -struct kgdb_arch arch_kgdb_ops = { - .gdb_bpt_instr = { 0xff }, - .flags = KGDB_HW_BREAKPOINT, -}; - -static const unsigned char mn10300_kgdb_insn_sizes[256] = -{ - /* 1 2 3 4 5 6 7 8 9 a b c d e f */ - 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */ - 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */ - 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */ - 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */ - 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */ - 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */ -}; - -/* - * Attempt to emulate single stepping by means of breakpoint instructions. - * Although there is a single-step trace flag in EPSW, its use is not - * sufficiently documented and is only intended for use with the JTAG debugger. - */ -static int kgdb_arch_do_singlestep(struct pt_regs *regs) -{ - unsigned long arg; - unsigned size; - u8 *pc = (u8 *)regs->pc, *sp = (u8 *)(regs + 1), cur; - u8 *x = NULL, *y = NULL; - int ret; - - ret = probe_kernel_read(&cur, pc, 1); - if (ret < 0) - return ret; - - size = mn10300_kgdb_insn_sizes[cur]; - if (size > 0) { - x = pc + size; - goto set_x; - } - - switch (cur) { - /* Bxx (d8,PC) */ - case 0xc0 ... 0xca: - ret = probe_kernel_read(&arg, pc + 1, 1); - if (ret < 0) - return ret; - x = pc + 2; - if (arg >= 0 && arg <= 2) - goto set_x; - y = pc + (s8)arg; - goto set_x_and_y; - - /* LXX (d8,PC) */ - case 0xd0 ... 0xda: - x = pc + 1; - if (regs->pc == regs->lar) - goto set_x; - y = (u8 *)regs->lar; - goto set_x_and_y; - - /* SETLB - loads the next four bytes into the LIR register - * (which mustn't include a breakpoint instruction) */ - case 0xdb: - x = pc + 5; - goto set_x; - - /* JMP (d16,PC) or CALL (d16,PC) */ - case 0xcc: - case 0xcd: - ret = probe_kernel_read(&arg, pc + 1, 2); - if (ret < 0) - return ret; - x = pc + (s16)arg; - goto set_x; - - /* JMP (d32,PC) or CALL (d32,PC) */ - case 0xdc: - case 0xdd: - ret = probe_kernel_read(&arg, pc + 1, 4); - if (ret < 0) - return ret; - x = pc + (s32)arg; - goto set_x; - - /* RETF */ - case 0xde: - x = (u8 *)regs->mdr; - goto set_x; - - /* RET */ - case 0xdf: - ret = probe_kernel_read(&arg, pc + 2, 1); - if (ret < 0) - return ret; - ret = probe_kernel_read(&x, sp + (s8)arg, 4); - if (ret < 0) - return ret; - goto set_x; - - case 0xf0: - ret = probe_kernel_read(&cur, pc + 1, 1); - if (ret < 0) - return ret; - - if (cur >= 0xf0 && cur <= 0xf7) { - /* JMP (An) / CALLS (An) */ - switch (cur & 3) { - case 0: x = (u8 *)regs->a0; break; - case 1: x = (u8 *)regs->a1; break; - case 2: x = (u8 *)regs->a2; break; - case 3: x = (u8 *)regs->a3; break; - } - goto set_x; - } else if (cur == 0xfc) { - /* RETS */ - ret = probe_kernel_read(&x, sp, 4); - if (ret < 0) - return ret; - goto set_x; - } else if (cur == 0xfd) { - /* RTI */ - ret = probe_kernel_read(&x, sp + 4, 4); - if (ret < 0) - return ret; - goto set_x; - } else { - x = pc + 2; - goto set_x; - } - break; - - /* potential 3-byte conditional branches */ - case 0xf8: - ret = probe_kernel_read(&cur, pc + 1, 1); - if (ret < 0) - return ret; - x = pc + 3; - - if (cur >= 0xe8 && cur <= 0xeb) { - ret = probe_kernel_read(&arg, pc + 2, 1); - if (ret < 0) - return ret; - if (arg >= 0 && arg <= 3) - goto set_x; - y = pc + (s8)arg; - goto set_x_and_y; - } - goto set_x; - - case 0xfa: - ret = probe_kernel_read(&cur, pc + 1, 1); - if (ret < 0) - return ret; - - if (cur == 0xff) { - /* CALLS (d16,PC) */ - ret = probe_kernel_read(&arg, pc + 2, 2); - if (ret < 0) - return ret; - x = pc + (s16)arg; - goto set_x; - } - - x = pc + 4; - goto set_x; - - case 0xfc: - ret = probe_kernel_read(&cur, pc + 1, 1); - if (ret < 0) - return ret; - - if (cur == 0xff) { - /* CALLS (d32,PC) */ - ret = probe_kernel_read(&arg, pc + 2, 4); - if (ret < 0) - return ret; - x = pc + (s32)arg; - goto set_x; - } - - x = pc + 6; - goto set_x; - } - - return 0; - -set_x: - kgdb_sstep_bp_addr[0] = x; - kgdb_sstep_bp_addr[1] = NULL; - ret = probe_kernel_read(&kgdb_sstep_bp[0], x, 1); - if (ret < 0) - return ret; - ret = probe_kernel_write(x, &arch_kgdb_ops.gdb_bpt_instr, 1); - if (ret < 0) - return ret; - kgdb_sstep_thread = current_thread_info(); - debugger_local_cache_flushinv_one(x); - return ret; - -set_x_and_y: - kgdb_sstep_bp_addr[0] = x; - kgdb_sstep_bp_addr[1] = y; - ret = probe_kernel_read(&kgdb_sstep_bp[0], x, 1); - if (ret < 0) - return ret; - ret = probe_kernel_read(&kgdb_sstep_bp[1], y, 1); - if (ret < 0) - return ret; - ret = probe_kernel_write(x, &arch_kgdb_ops.gdb_bpt_instr, 1); - if (ret < 0) - return ret; - ret = probe_kernel_write(y, &arch_kgdb_ops.gdb_bpt_instr, 1); - if (ret < 0) { - probe_kernel_write(kgdb_sstep_bp_addr[0], - &kgdb_sstep_bp[0], 1); - } else { - kgdb_sstep_thread = current_thread_info(); - } - debugger_local_cache_flushinv_one(x); - debugger_local_cache_flushinv_one(y); - return ret; -} - -/* - * Remove emplaced single-step breakpoints, returning true if we hit one of - * them. - */ -static bool kgdb_arch_undo_singlestep(struct pt_regs *regs) -{ - bool hit = false; - u8 *x = kgdb_sstep_bp_addr[0], *y = kgdb_sstep_bp_addr[1]; - u8 opcode; - - if (kgdb_sstep_thread == current_thread_info()) { - if (x) { - if (x == (u8 *)regs->pc) - hit = true; - if (probe_kernel_read(&opcode, x, - 1) < 0 || - opcode != 0xff) - BUG(); - probe_kernel_write(x, &kgdb_sstep_bp[0], 1); - debugger_local_cache_flushinv_one(x); - } - if (y) { - if (y == (u8 *)regs->pc) - hit = true; - if (probe_kernel_read(&opcode, y, - 1) < 0 || - opcode != 0xff) - BUG(); - probe_kernel_write(y, &kgdb_sstep_bp[1], 1); - debugger_local_cache_flushinv_one(y); - } - } - - kgdb_sstep_bp_addr[0] = NULL; - kgdb_sstep_bp_addr[1] = NULL; - kgdb_sstep_thread = NULL; - return hit; -} - -/* - * Catch a single-step-pending thread being deleted and make sure the global - * single-step state is cleared. At this point the breakpoints should have - * been removed by __switch_to(). - */ -void arch_release_thread_stack(unsigned long *stack) -{ - struct thread_info *ti = (void *)stack; - if (kgdb_sstep_thread == ti) { - kgdb_sstep_thread = NULL; - - /* However, we may now be running in degraded mode, with most - * of the CPUs disabled until such a time as KGDB is reentered, - * so force immediate reentry */ - kgdb_breakpoint(); - } -} - -/* - * Handle unknown packets and [CcsDk] packets - * - at this point breakpoints have been installed - */ -int kgdb_arch_handle_exception(int vector, int signo, int err_code, - char *remcom_in_buffer, char *remcom_out_buffer, - struct pt_regs *regs) -{ - long addr; - char *ptr; - - switch (remcom_in_buffer[0]) { - case 'c': - case 's': - /* try to read optional parameter, pc unchanged if no parm */ - ptr = &remcom_in_buffer[1]; - if (kgdb_hex2long(&ptr, &addr)) - regs->pc = addr; - case 'D': - case 'k': - atomic_set(&kgdb_cpu_doing_single_step, -1); - - if (remcom_in_buffer[0] == 's') { - kgdb_arch_do_singlestep(regs); - kgdb_single_step = 1; - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); - } - return 0; - } - return -1; /* this means that we do not want to exit from the handler */ -} - -/* - * Handle event interception - * - returns 0 if the exception should be skipped, -ERROR otherwise. - */ -int debugger_intercept(enum exception_code excep, int signo, int si_code, - struct pt_regs *regs) -{ - int ret; - - if (kgdb_arch_undo_singlestep(regs)) { - excep = EXCEP_TRAP; - signo = SIGTRAP; - si_code = TRAP_TRACE; - } - - ret = kgdb_handle_exception(excep, signo, si_code, regs); - - debugger_local_cache_flushinv(); - - return ret; -} - -/* - * Determine if we've hit a debugger special breakpoint - */ -int at_debugger_breakpoint(struct pt_regs *regs) -{ - return regs->pc == (unsigned long)&__arch_kgdb_breakpoint; -} - -/* - * Initialise kgdb - */ -int kgdb_arch_init(void) -{ - return 0; -} - -/* - * Do something, perhaps, but don't know what. - */ -void kgdb_arch_exit(void) -{ -} - -#ifdef CONFIG_SMP -void debugger_nmi_interrupt(struct pt_regs *regs, enum exception_code code) -{ - kgdb_nmicallback(arch_smp_processor_id(), regs); - debugger_local_cache_flushinv(); -} - -void kgdb_roundup_cpus(unsigned long flags) -{ - smp_jump_to_debugger(); -} -#endif diff --git a/arch/mn10300/kernel/kprobes.c b/arch/mn10300/kernel/kprobes.c deleted file mode 100644 index 0311a7fcea16..000000000000 --- a/arch/mn10300/kernel/kprobes.c +++ /dev/null @@ -1,656 +0,0 @@ -/* MN10300 Kernel probes implementation - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public Licence as published by - * the Free Software Foundation; either version 2 of the Licence, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public Licence for more details. - * - * You should have received a copy of the GNU General Public Licence - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include - -struct kretprobe_blackpoint kretprobe_blacklist[] = { { NULL, NULL } }; -const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist); - -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 - -static struct kprobe *cur_kprobe; -static unsigned long cur_kprobe_orig_pc; -static unsigned long cur_kprobe_next_pc; -static int cur_kprobe_ss_flags; -static unsigned long kprobe_status; -static kprobe_opcode_t cur_kprobe_ss_buf[MAX_INSN_SIZE + 2]; -static unsigned long cur_kprobe_bp_addr; - -DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; - - -/* singlestep flag bits */ -#define SINGLESTEP_BRANCH 1 -#define SINGLESTEP_PCREL 2 - -#define READ_BYTE(p, valp) \ - do { *(u8 *)(valp) = *(u8 *)(p); } while (0) - -#define READ_WORD16(p, valp) \ - do { \ - READ_BYTE((p), (valp)); \ - READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1); \ - } while (0) - -#define READ_WORD32(p, valp) \ - do { \ - READ_BYTE((p), (valp)); \ - READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1); \ - READ_BYTE((u8 *)(p) + 2, (u8 *)(valp) + 2); \ - READ_BYTE((u8 *)(p) + 3, (u8 *)(valp) + 3); \ - } while (0) - - -static const u8 mn10300_insn_sizes[256] = -{ - /* 1 2 3 4 5 6 7 8 9 a b c d e f */ - 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */ - 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */ - 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */ - 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */ - 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */ - 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */ - 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */ -}; - -#define LT (1 << 0) -#define GT (1 << 1) -#define GE (1 << 2) -#define LE (1 << 3) -#define CS (1 << 4) -#define HI (1 << 5) -#define CC (1 << 6) -#define LS (1 << 7) -#define EQ (1 << 8) -#define NE (1 << 9) -#define RA (1 << 10) -#define VC (1 << 11) -#define VS (1 << 12) -#define NC (1 << 13) -#define NS (1 << 14) - -static const u16 cond_table[] = { - /* V C N Z */ - /* 0 0 0 0 */ (NE | NC | CC | VC | GE | GT | HI), - /* 0 0 0 1 */ (EQ | NC | CC | VC | GE | LE | LS), - /* 0 0 1 0 */ (NE | NS | CC | VC | LT | LE | HI), - /* 0 0 1 1 */ (EQ | NS | CC | VC | LT | LE | LS), - /* 0 1 0 0 */ (NE | NC | CS | VC | GE | GT | LS), - /* 0 1 0 1 */ (EQ | NC | CS | VC | GE | LE | LS), - /* 0 1 1 0 */ (NE | NS | CS | VC | LT | LE | LS), - /* 0 1 1 1 */ (EQ | NS | CS | VC | LT | LE | LS), - /* 1 0 0 0 */ (NE | NC | CC | VS | LT | LE | HI), - /* 1 0 0 1 */ (EQ | NC | CC | VS | LT | LE | LS), - /* 1 0 1 0 */ (NE | NS | CC | VS | GE | GT | HI), - /* 1 0 1 1 */ (EQ | NS | CC | VS | GE | LE | LS), - /* 1 1 0 0 */ (NE | NC | CS | VS | LT | LE | LS), - /* 1 1 0 1 */ (EQ | NC | CS | VS | LT | LE | LS), - /* 1 1 1 0 */ (NE | NS | CS | VS | GE | GT | LS), - /* 1 1 1 1 */ (EQ | NS | CS | VS | GE | LE | LS), -}; - -/* - * Calculate what the PC will be after executing next instruction - */ -static unsigned find_nextpc(struct pt_regs *regs, int *flags) -{ - unsigned size; - s8 x8; - s16 x16; - s32 x32; - u8 opc, *pc, *sp, *next; - - next = 0; - *flags = SINGLESTEP_PCREL; - - pc = (u8 *) regs->pc; - sp = (u8 *) (regs + 1); - opc = *pc; - - size = mn10300_insn_sizes[opc]; - if (size > 0) { - next = pc + size; - } else { - switch (opc) { - /* Bxx (d8,PC) */ - case 0xc0 ... 0xca: - x8 = 2; - if (cond_table[regs->epsw & 0xf] & (1 << (opc & 0xf))) - x8 = (s8)pc[1]; - next = pc + x8; - *flags |= SINGLESTEP_BRANCH; - break; - - /* JMP (d16,PC) or CALL (d16,PC) */ - case 0xcc: - case 0xcd: - READ_WORD16(pc + 1, &x16); - next = pc + x16; - *flags |= SINGLESTEP_BRANCH; - break; - - /* JMP (d32,PC) or CALL (d32,PC) */ - case 0xdc: - case 0xdd: - READ_WORD32(pc + 1, &x32); - next = pc + x32; - *flags |= SINGLESTEP_BRANCH; - break; - - /* RETF */ - case 0xde: - next = (u8 *)regs->mdr; - *flags &= ~SINGLESTEP_PCREL; - *flags |= SINGLESTEP_BRANCH; - break; - - /* RET */ - case 0xdf: - sp += pc[2]; - READ_WORD32(sp, &x32); - next = (u8 *)x32; - *flags &= ~SINGLESTEP_PCREL; - *flags |= SINGLESTEP_BRANCH; - break; - - case 0xf0: - next = pc + 2; - opc = pc[1]; - if (opc >= 0xf0 && opc <= 0xf7) { - /* JMP (An) / CALLS (An) */ - switch (opc & 3) { - case 0: - next = (u8 *)regs->a0; - break; - case 1: - next = (u8 *)regs->a1; - break; - case 2: - next = (u8 *)regs->a2; - break; - case 3: - next = (u8 *)regs->a3; - break; - } - *flags &= ~SINGLESTEP_PCREL; - *flags |= SINGLESTEP_BRANCH; - } else if (opc == 0xfc) { - /* RETS */ - READ_WORD32(sp, &x32); - next = (u8 *)x32; - *flags &= ~SINGLESTEP_PCREL; - *flags |= SINGLESTEP_BRANCH; - } else if (opc == 0xfd) { - /* RTI */ - READ_WORD32(sp + 4, &x32); - next = (u8 *)x32; - *flags &= ~SINGLESTEP_PCREL; - *flags |= SINGLESTEP_BRANCH; - } - break; - - /* potential 3-byte conditional branches */ - case 0xf8: - next = pc + 3; - opc = pc[1]; - if (opc >= 0xe8 && opc <= 0xeb && - (cond_table[regs->epsw & 0xf] & - (1 << ((opc & 0xf) + 3))) - ) { - READ_BYTE(pc+2, &x8); - next = pc + x8; - *flags |= SINGLESTEP_BRANCH; - } - break; - - case 0xfa: - if (pc[1] == 0xff) { - /* CALLS (d16,PC) */ - READ_WORD16(pc + 2, &x16); - next = pc + x16; - } else - next = pc + 4; - *flags |= SINGLESTEP_BRANCH; - break; - - case 0xfc: - x32 = 6; - if (pc[1] == 0xff) { - /* CALLS (d32,PC) */ - READ_WORD32(pc + 2, &x32); - } - next = pc + x32; - *flags |= SINGLESTEP_BRANCH; - break; - /* LXX (d8,PC) */ - /* SETLB - loads the next four bytes into the LIR reg */ - case 0xd0 ... 0xda: - case 0xdb: - panic("Can't singlestep Lxx/SETLB\n"); - break; - } - } - return (unsigned)next; - -} - -/* - * set up out of place singlestep of some branching instructions - */ -static unsigned __kprobes singlestep_branch_setup(struct pt_regs *regs) -{ - u8 opc, *pc, *sp, *next; - - next = NULL; - pc = (u8 *) regs->pc; - sp = (u8 *) (regs + 1); - - switch (pc[0]) { - case 0xc0 ... 0xca: /* Bxx (d8,PC) */ - case 0xcc: /* JMP (d16,PC) */ - case 0xdc: /* JMP (d32,PC) */ - case 0xf8: /* Bxx (d8,PC) 3-byte version */ - /* don't really need to do anything except cause trap */ - next = pc; - break; - - case 0xcd: /* CALL (d16,PC) */ - pc[1] = 5; - pc[2] = 0; - next = pc + 5; - break; - - case 0xdd: /* CALL (d32,PC) */ - pc[1] = 7; - pc[2] = 0; - pc[3] = 0; - pc[4] = 0; - next = pc + 7; - break; - - case 0xde: /* RETF */ - next = pc + 3; - regs->mdr = (unsigned) next; - break; - - case 0xdf: /* RET */ - sp += pc[2]; - next = pc + 3; - *(unsigned *)sp = (unsigned) next; - break; - - case 0xf0: - next = pc + 2; - opc = pc[1]; - if (opc >= 0xf0 && opc <= 0xf3) { - /* CALLS (An) */ - /* use CALLS (d16,PC) to avoid mucking with An */ - pc[0] = 0xfa; - pc[1] = 0xff; - pc[2] = 4; - pc[3] = 0; - next = pc + 4; - } else if (opc >= 0xf4 && opc <= 0xf7) { - /* JMP (An) */ - next = pc; - } else if (opc == 0xfc) { - /* RETS */ - next = pc + 2; - *(unsigned *) sp = (unsigned) next; - } else if (opc == 0xfd) { - /* RTI */ - next = pc + 2; - *(unsigned *)(sp + 4) = (unsigned) next; - } - break; - - case 0xfa: /* CALLS (d16,PC) */ - pc[2] = 4; - pc[3] = 0; - next = pc + 4; - break; - - case 0xfc: /* CALLS (d32,PC) */ - pc[2] = 6; - pc[3] = 0; - pc[4] = 0; - pc[5] = 0; - next = pc + 6; - break; - - case 0xd0 ... 0xda: /* LXX (d8,PC) */ - case 0xdb: /* SETLB */ - panic("Can't singlestep Lxx/SETLB\n"); - } - - return (unsigned) next; -} - -int __kprobes arch_prepare_kprobe(struct kprobe *p) -{ - return 0; -} - -void __kprobes arch_copy_kprobe(struct kprobe *p) -{ - memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE); -} - -void __kprobes arch_arm_kprobe(struct kprobe *p) -{ - *p->addr = BREAKPOINT_INSTRUCTION; - flush_icache_range((unsigned long) p->addr, - (unsigned long) p->addr + sizeof(kprobe_opcode_t)); -} - -void __kprobes arch_disarm_kprobe(struct kprobe *p) -{ -#ifndef CONFIG_MN10300_CACHE_SNOOP - mn10300_dcache_flush(); - mn10300_icache_inv(); -#endif -} - -void arch_remove_kprobe(struct kprobe *p) -{ -} - -static inline -void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs) -{ - *p->addr = p->opcode; - regs->pc = (unsigned long) p->addr; -#ifndef CONFIG_MN10300_CACHE_SNOOP - mn10300_dcache_flush(); - mn10300_icache_inv(); -#endif -} - -static inline -void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) -{ - unsigned long nextpc; - - cur_kprobe_orig_pc = regs->pc; - memcpy(cur_kprobe_ss_buf, &p->ainsn.insn[0], MAX_INSN_SIZE); - regs->pc = (unsigned long) cur_kprobe_ss_buf; - - nextpc = find_nextpc(regs, &cur_kprobe_ss_flags); - if (cur_kprobe_ss_flags & SINGLESTEP_PCREL) - cur_kprobe_next_pc = cur_kprobe_orig_pc + (nextpc - regs->pc); - else - cur_kprobe_next_pc = nextpc; - - /* branching instructions need special handling */ - if (cur_kprobe_ss_flags & SINGLESTEP_BRANCH) - nextpc = singlestep_branch_setup(regs); - - cur_kprobe_bp_addr = nextpc; - - *(u8 *) nextpc = BREAKPOINT_INSTRUCTION; - mn10300_dcache_flush_range2((unsigned) cur_kprobe_ss_buf, - sizeof(cur_kprobe_ss_buf)); - mn10300_icache_inv(); -} - -static inline int __kprobes kprobe_handler(struct pt_regs *regs) -{ - struct kprobe *p; - int ret = 0; - unsigned int *addr = (unsigned int *) regs->pc; - - /* We're in an interrupt, but this is clear and BUG()-safe. */ - preempt_disable(); - - /* Check we're not actually recursing */ - if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ - p = get_kprobe(addr); - if (p) { - disarm_kprobe(p, regs); - ret = 1; - } else { - p = cur_kprobe; - if (p->break_handler && p->break_handler(p, regs)) - goto ss_probe; - } - /* If it's not ours, can't be delete race, (we hold lock). */ - goto no_kprobe; - } - - p = get_kprobe(addr); - if (!p) { - if (*addr != BREAKPOINT_INSTRUCTION) { - /* The breakpoint instruction was removed right after - * we hit it. Another cpu has removed either a - * probepoint or a debugger breakpoint at this address. - * In either case, no further handling of this - * interrupt is appropriate. - */ - ret = 1; - } - /* Not one of ours: let kernel handle it */ - goto no_kprobe; - } - - kprobe_status = KPROBE_HIT_ACTIVE; - cur_kprobe = p; - if (p->pre_handler(p, regs)) { - /* handler has already set things up, so skip ss setup */ - return 1; - } - -ss_probe: - prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; - return 1; - -no_kprobe: - preempt_enable_no_resched(); - return ret; -} - -/* - * Called after single-stepping. p->addr is the address of the - * instruction whose first byte has been replaced by the "breakpoint" - * instruction. To avoid the SMP problems that can occur when we - * temporarily put back the original opcode to single-step, we - * single-stepped a copy of the instruction. The address of this - * copy is p->ainsn.insn. - */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) -{ - /* we may need to fixup regs/stack after singlestepping a call insn */ - if (cur_kprobe_ss_flags & SINGLESTEP_BRANCH) { - regs->pc = cur_kprobe_orig_pc; - switch (p->ainsn.insn[0]) { - case 0xcd: /* CALL (d16,PC) */ - *(unsigned *) regs->sp = regs->mdr = regs->pc + 5; - break; - case 0xdd: /* CALL (d32,PC) */ - /* fixup mdr and return address on stack */ - *(unsigned *) regs->sp = regs->mdr = regs->pc + 7; - break; - case 0xf0: - if (p->ainsn.insn[1] >= 0xf0 && - p->ainsn.insn[1] <= 0xf3) { - /* CALLS (An) */ - /* fixup MDR and return address on stack */ - regs->mdr = regs->pc + 2; - *(unsigned *) regs->sp = regs->mdr; - } - break; - - case 0xfa: /* CALLS (d16,PC) */ - /* fixup MDR and return address on stack */ - *(unsigned *) regs->sp = regs->mdr = regs->pc + 4; - break; - - case 0xfc: /* CALLS (d32,PC) */ - /* fixup MDR and return address on stack */ - *(unsigned *) regs->sp = regs->mdr = regs->pc + 6; - break; - } - } - - regs->pc = cur_kprobe_next_pc; - cur_kprobe_bp_addr = 0; -} - -static inline int __kprobes post_kprobe_handler(struct pt_regs *regs) -{ - if (!kprobe_running()) - return 0; - - if (cur_kprobe->post_handler) - cur_kprobe->post_handler(cur_kprobe, regs, 0); - - resume_execution(cur_kprobe, regs); - reset_current_kprobe(); - preempt_enable_no_resched(); - return 1; -} - -/* Interrupts disabled, kprobe_lock held. */ -static inline -int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) -{ - if (cur_kprobe->fault_handler && - cur_kprobe->fault_handler(cur_kprobe, regs, trapnr)) - return 1; - - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur_kprobe, regs); - reset_current_kprobe(); - preempt_enable_no_resched(); - } - return 0; -} - -/* - * Wrapper routine to for handling exceptions. - */ -int __kprobes kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data) -{ - struct die_args *args = data; - - switch (val) { - case DIE_BREAKPOINT: - if (cur_kprobe_bp_addr != args->regs->pc) { - if (kprobe_handler(args->regs)) - return NOTIFY_STOP; - } else { - if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; - } - break; - case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; - default: - break; - } - return NOTIFY_DONE; -} - -/* Jprobes support. */ -static struct pt_regs jprobe_saved_regs; -static struct pt_regs *jprobe_saved_regs_location; -static kprobe_opcode_t jprobe_saved_stack[MAX_STACK_SIZE]; - -int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct jprobe *jp = container_of(p, struct jprobe, kp); - - jprobe_saved_regs_location = regs; - memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs)); - - /* Save a whole stack frame, this gets arguments - * pushed onto the stack after using up all the - * arg registers. - */ - memcpy(&jprobe_saved_stack, regs + 1, sizeof(jprobe_saved_stack)); - - /* setup return addr to the jprobe handler routine */ - regs->pc = (unsigned long) jp->entry; - return 1; -} - -void __kprobes jprobe_return(void) -{ - void *orig_sp = jprobe_saved_regs_location + 1; - - preempt_enable_no_resched(); - asm volatile(" mov %0,sp\n" - ".globl jprobe_return_bp_addr\n" - "jprobe_return_bp_addr:\n\t" - " .byte 0xff\n" - : : "d" (orig_sp)); -} - -extern void jprobe_return_bp_addr(void); - -int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) -{ - u8 *addr = (u8 *) regs->pc; - - if (addr == (u8 *) jprobe_return_bp_addr) { - if (jprobe_saved_regs_location != regs) { - printk(KERN_ERR"JPROBE:" - " Current regs (%p) does not match saved regs" - " (%p).\n", - regs, jprobe_saved_regs_location); - BUG(); - } - - /* Restore old register state. - */ - memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); - - memcpy(regs + 1, &jprobe_saved_stack, - sizeof(jprobe_saved_stack)); - return 1; - } - return 0; -} - -int __init arch_init_kprobes(void) -{ - return 0; -} diff --git a/arch/mn10300/kernel/mn10300-debug.c b/arch/mn10300/kernel/mn10300-debug.c deleted file mode 100644 index bd8196478cbc..000000000000 --- a/arch/mn10300/kernel/mn10300-debug.c +++ /dev/null @@ -1,58 +0,0 @@ -/* Debugging stuff for the MN10300-based processors - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include - -#undef MN10300_CONSOLE_ON_SERIO - -/* - * write a string directly through one of the serial ports on-board the MN10300 - */ -#ifdef MN10300_CONSOLE_ON_SERIO -void debug_to_serial_mnser(const char *p, int n) -{ - char ch; - - for (; n > 0; n--) { - ch = *p++; - -#if MN10300_CONSOLE_ON_SERIO == 0 - while (SC0STR & (SC01STR_TBF)) continue; - SC0TXB = ch; - while (SC0STR & (SC01STR_TBF)) continue; - if (ch == 0x0a) { - SC0TXB = 0x0d; - while (SC0STR & (SC01STR_TBF)) continue; - } - -#elif MN10300_CONSOLE_ON_SERIO == 1 - while (SC1STR & (SC01STR_TBF)) continue; - SC1TXB = ch; - while (SC1STR & (SC01STR_TBF)) continue; - if (ch == 0x0a) { - SC1TXB = 0x0d; - while (SC1STR & (SC01STR_TBF)) continue; - } - -#elif MN10300_CONSOLE_ON_SERIO == 2 - while (SC2STR & (SC2STR_TBF)) continue; - SC2TXB = ch; - while (SC2STR & (SC2STR_TBF)) continue; - if (ch == 0x0a) { - SC2TXB = 0x0d; - while (SC2STR & (SC2STR_TBF)) continue; - } - -#endif - } -} -#endif - diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S deleted file mode 100644 index b95e76caf4fa..000000000000 --- a/arch/mn10300/kernel/mn10300-serial-low.S +++ /dev/null @@ -1,194 +0,0 @@ -############################################################################### -# -# Virtual DMA driver for MN10300 serial ports -# -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "mn10300-serial.h" - -#define SCxCTR 0x00 -#define SCxICR 0x04 -#define SCxTXB 0x08 -#define SCxRXB 0x09 -#define SCxSTR 0x0c -#define SCxTIM 0x0d - - .text - -############################################################################### -# -# serial port interrupt virtual DMA entry point -# - intended to run at interrupt priority 1 (not affected by local_irq_disable) -# -############################################################################### - .balign L1_CACHE_BYTES -ENTRY(mn10300_serial_vdma_interrupt) -# or EPSW_IE,psw # permit overriding by - # debugging interrupts - movm [d2,d3,a2,a3,exreg0],(sp) - - movhu (IAGR),a2 # see if which interrupt is - # pending - and IAGR_GN,a2 - add a2,a2 - add mn10300_serial_int_tbl,a2 - - mov (a2+),a3 - mov (__iobase,a3),e2 - mov (a2),a2 - jmp (a2) - -############################################################################### -# -# serial port receive interrupt virtual DMA entry point -# - intended to run at interrupt priority 1 (not affected by local_irq_disable) -# - stores data/status byte pairs in the ring buffer -# - induces a scheduler tick timer interrupt when done, which we then subvert -# on entry: -# A3 struct mn10300_serial_port * -# E2 I/O port base -# -############################################################################### -ENTRY(mn10300_serial_vdma_rx_handler) - mov (__rx_icr,a3),e3 - mov GxICR_DETECT,d2 - movbu d2,(e3) # ACK the interrupt - movhu (e3),d2 # flush - - mov (__rx_inp,a3),d3 - mov d3,a2 - add 2,d3 - and MNSC_BUFFER_SIZE-1,d3 - mov (__rx_outp,a3),d2 - cmp d3,d2 - beq mnsc_vdma_rx_overflow - - mov (__rx_buffer,a3),d2 - add d2,a2 - movhu (SCxSTR,e2),d2 - movbu d2,(1,a2) - movbu (SCxRXB,e2),d2 - movbu d2,(a2) - mov d3,(__rx_inp,a3) - bset MNSCx_RX_AVAIL,(__intr_flags,a3) - -mnsc_vdma_rx_done: - mov (__tm_icr,a3),a2 - mov GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2 - movhu d2,(a2) # request a slow interrupt - movhu (a2),d2 # flush - - movm (sp),[d2,d3,a2,a3,exreg0] - rti - -mnsc_vdma_rx_overflow: - bset MNSCx_RX_OVERF,(__intr_flags,a3) - bra mnsc_vdma_rx_done - -############################################################################### -# -# serial port transmit interrupt virtual DMA entry point -# - intended to run at interrupt priority 1 (not affected by local_irq_disable) -# - retrieves data bytes from the ring buffer and passes them to the serial port -# - induces a scheduler tick timer interrupt when done, which we then subvert -# A3 struct mn10300_serial_port * -# E2 I/O port base -# -############################################################################### - .balign L1_CACHE_BYTES -ENTRY(mn10300_serial_vdma_tx_handler) - mov (__tx_icr,a3),e3 - mov GxICR_DETECT,d2 - movbu d2,(e3) # ACK the interrupt - movhu (e3),d2 # flush - - btst 0xFF,(__tx_flags,a3) # handle transmit flags - bne mnsc_vdma_tx_flags - - movbu (SCxSTR,e2),d2 # don't try and transmit a char if the - # buffer is not empty - btst SC01STR_TBF,d2 # (may have tried to jumpstart) - bne mnsc_vdma_tx_noint - - movbu (__tx_xchar,a3),d2 # handle hi-pri XON/XOFF - or d2,d2 - bne mnsc_vdma_tx_xchar - - mov (__uart_state,a3),a2 # see if the TTY Tx queue has anything in it - mov (__xmit_tail,a2),d3 - mov (__xmit_head,a2),d2 - cmp d3,d2 - beq mnsc_vdma_tx_empty - - mov (__xmit_buffer,a2),d2 # get a char from the buffer and - # transmit it - movbu (d3,d2),d2 - movbu d2,(SCxTXB,e2) # Tx - - inc d3 # advance the buffer pointer - and __UART_XMIT_SIZE-1,d3 - mov (__xmit_head,a2),d2 - mov d3,(__xmit_tail,a2) - - sub d3,d2 # see if we've written everything - beq mnsc_vdma_tx_empty - - and __UART_XMIT_SIZE-1,d2 # see if we just made a hole - cmp __UART_XMIT_SIZE-2,d2 - beq mnsc_vdma_tx_made_hole - -mnsc_vdma_tx_done: - mov (__tm_icr,a3),a2 - mov GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2 - movhu d2,(a2) # request a slow interrupt - movhu (a2),d2 # flush - -mnsc_vdma_tx_noint: - movm (sp),[d2,d3,a2,a3,exreg0] - rti - -mnsc_vdma_tx_empty: - mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2 - movhu d2,(e3) # disable the interrupt - movhu (e3),d2 # flush - - bset MNSCx_TX_EMPTY,(__intr_flags,a3) - bra mnsc_vdma_tx_done - -mnsc_vdma_tx_flags: - btst MNSCx_TX_STOP,(__tx_flags,a3) - bne mnsc_vdma_tx_stop - movhu (SCxCTR,e2),d2 # turn on break mode - or SC01CTR_BKE,d2 - movhu d2,(SCxCTR,e2) -mnsc_vdma_tx_stop: - mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2 - movhu d2,(e3) # disable transmit interrupts on this - # channel - movhu (e3),d2 # flush - bra mnsc_vdma_tx_noint - -mnsc_vdma_tx_xchar: - bclr 0xff,(__tx_xchar,a3) - movbu d2,(SCxTXB,e2) - bra mnsc_vdma_tx_done - -mnsc_vdma_tx_made_hole: - bset MNSCx_TX_SPACE,(__intr_flags,a3) - bra mnsc_vdma_tx_done diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c deleted file mode 100644 index 4994b570dfd9..000000000000 --- a/arch/mn10300/kernel/mn10300-serial.c +++ /dev/null @@ -1,1790 +0,0 @@ -/* MN10300 On-chip serial port UART driver - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -static const char serial_name[] = "MN10300 Serial driver"; -static const char serial_version[] = "mn10300_serial-1.0"; -static const char serial_revdate[] = "2007-11-06"; - -#if defined(CONFIG_MN10300_TTYSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include "mn10300-serial.h" - -#ifdef CONFIG_SMP -#undef GxICR -#define GxICR(X) CROSS_GxICR(X, 0) -#endif /* CONFIG_SMP */ - -#define kenter(FMT, ...) \ - printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__) -#define _enter(FMT, ...) \ - no_printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__) -#define kdebug(FMT, ...) \ - printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__) -#define _debug(FMT, ...) \ - no_printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__) -#define kproto(FMT, ...) \ - printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__) -#define _proto(FMT, ...) \ - no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__) - -#ifndef CODMSB -/* c_cflag bit meaning */ -#define CODMSB 004000000000 /* change Transfer bit-order */ -#endif - -#define NR_UARTS 3 - -#ifdef CONFIG_MN10300_TTYSM_CONSOLE -static void mn10300_serial_console_write(struct console *co, - const char *s, unsigned count); -static int __init mn10300_serial_console_setup(struct console *co, - char *options); - -static struct uart_driver mn10300_serial_driver; -static struct console mn10300_serial_console = { - .name = "ttySM", - .write = mn10300_serial_console_write, - .device = uart_console_device, - .setup = mn10300_serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &mn10300_serial_driver, -}; -#endif - -static struct uart_driver mn10300_serial_driver = { - .owner = NULL, - .driver_name = "mn10300-serial", - .dev_name = "ttySM", - .major = TTY_MAJOR, - .minor = 128, - .nr = NR_UARTS, -#ifdef CONFIG_MN10300_TTYSM_CONSOLE - .cons = &mn10300_serial_console, -#endif -}; - -static unsigned int mn10300_serial_tx_empty(struct uart_port *); -static void mn10300_serial_set_mctrl(struct uart_port *, unsigned int mctrl); -static unsigned int mn10300_serial_get_mctrl(struct uart_port *); -static void mn10300_serial_stop_tx(struct uart_port *); -static void mn10300_serial_start_tx(struct uart_port *); -static void mn10300_serial_send_xchar(struct uart_port *, char ch); -static void mn10300_serial_stop_rx(struct uart_port *); -static void mn10300_serial_enable_ms(struct uart_port *); -static void mn10300_serial_break_ctl(struct uart_port *, int ctl); -static int mn10300_serial_startup(struct uart_port *); -static void mn10300_serial_shutdown(struct uart_port *); -static void mn10300_serial_set_termios(struct uart_port *, - struct ktermios *new, - struct ktermios *old); -static const char *mn10300_serial_type(struct uart_port *); -static void mn10300_serial_release_port(struct uart_port *); -static int mn10300_serial_request_port(struct uart_port *); -static void mn10300_serial_config_port(struct uart_port *, int); -static int mn10300_serial_verify_port(struct uart_port *, - struct serial_struct *); -#ifdef CONFIG_CONSOLE_POLL -static void mn10300_serial_poll_put_char(struct uart_port *, unsigned char); -static int mn10300_serial_poll_get_char(struct uart_port *); -#endif - -static const struct uart_ops mn10300_serial_ops = { - .tx_empty = mn10300_serial_tx_empty, - .set_mctrl = mn10300_serial_set_mctrl, - .get_mctrl = mn10300_serial_get_mctrl, - .stop_tx = mn10300_serial_stop_tx, - .start_tx = mn10300_serial_start_tx, - .send_xchar = mn10300_serial_send_xchar, - .stop_rx = mn10300_serial_stop_rx, - .enable_ms = mn10300_serial_enable_ms, - .break_ctl = mn10300_serial_break_ctl, - .startup = mn10300_serial_startup, - .shutdown = mn10300_serial_shutdown, - .set_termios = mn10300_serial_set_termios, - .type = mn10300_serial_type, - .release_port = mn10300_serial_release_port, - .request_port = mn10300_serial_request_port, - .config_port = mn10300_serial_config_port, - .verify_port = mn10300_serial_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_put_char = mn10300_serial_poll_put_char, - .poll_get_char = mn10300_serial_poll_get_char, -#endif -}; - -static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id); - -/* - * the first on-chip serial port: ttySM0 (aka SIF0) - */ -#ifdef CONFIG_MN10300_TTYSM0 -struct mn10300_serial_port mn10300_serial_port_sif0 = { - .uart.ops = &mn10300_serial_ops, - .uart.membase = (void __iomem *) &SC0CTR, - .uart.mapbase = (unsigned long) &SC0CTR, - .uart.iotype = UPIO_MEM, - .uart.irq = 0, - .uart.uartclk = 0, /* MN10300_IOCLK, */ - .uart.fifosize = 1, - .uart.flags = UPF_BOOT_AUTOCONF, - .uart.line = 0, - .uart.type = PORT_MN10300, - .uart.lock = - __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif0.uart.lock), - .name = "ttySM0", - ._iobase = &SC0CTR, - ._control = &SC0CTR, - ._status = (volatile u8 *)&SC0STR, - ._intr = &SC0ICR, - ._rxb = &SC0RXB, - ._txb = &SC0TXB, - .rx_name = "ttySM0:Rx", - .tx_name = "ttySM0:Tx", -#if defined(CONFIG_MN10300_TTYSM0_TIMER8) - .tm_name = "ttySM0:Timer8", - ._tmxmd = &TM8MD, - ._tmxbr = &TM8BR, - ._tmicr = &TM8ICR, - .tm_irq = TM8IRQ, - .div_timer = MNSCx_DIV_TIMER_16BIT, -#elif defined(CONFIG_MN10300_TTYSM0_TIMER0) - .tm_name = "ttySM0:Timer0", - ._tmxmd = &TM0MD, - ._tmxbr = (volatile u16 *)&TM0BR, - ._tmicr = &TM0ICR, - .tm_irq = TM0IRQ, - .div_timer = MNSCx_DIV_TIMER_8BIT, -#elif defined(CONFIG_MN10300_TTYSM0_TIMER2) - .tm_name = "ttySM0:Timer2", - ._tmxmd = &TM2MD, - ._tmxbr = (volatile u16 *)&TM2BR, - ._tmicr = &TM2ICR, - .tm_irq = TM2IRQ, - .div_timer = MNSCx_DIV_TIMER_8BIT, -#else -#error "Unknown config for ttySM0" -#endif - .rx_irq = SC0RXIRQ, - .tx_irq = SC0TXIRQ, - .rx_icr = &GxICR(SC0RXIRQ), - .tx_icr = &GxICR(SC0TXIRQ), - .clock_src = MNSCx_CLOCK_SRC_IOCLK, - .options = 0, -#ifdef CONFIG_GDBSTUB_ON_TTYSM0 - .gdbstub = 1, -#endif -}; -#endif /* CONFIG_MN10300_TTYSM0 */ - -/* - * the second on-chip serial port: ttySM1 (aka SIF1) - */ -#ifdef CONFIG_MN10300_TTYSM1 -struct mn10300_serial_port mn10300_serial_port_sif1 = { - .uart.ops = &mn10300_serial_ops, - .uart.membase = (void __iomem *) &SC1CTR, - .uart.mapbase = (unsigned long) &SC1CTR, - .uart.iotype = UPIO_MEM, - .uart.irq = 0, - .uart.uartclk = 0, /* MN10300_IOCLK, */ - .uart.fifosize = 1, - .uart.flags = UPF_BOOT_AUTOCONF, - .uart.line = 1, - .uart.type = PORT_MN10300, - .uart.lock = - __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif1.uart.lock), - .name = "ttySM1", - ._iobase = &SC1CTR, - ._control = &SC1CTR, - ._status = (volatile u8 *)&SC1STR, - ._intr = &SC1ICR, - ._rxb = &SC1RXB, - ._txb = &SC1TXB, - .rx_name = "ttySM1:Rx", - .tx_name = "ttySM1:Tx", -#if defined(CONFIG_MN10300_TTYSM1_TIMER9) - .tm_name = "ttySM1:Timer9", - ._tmxmd = &TM9MD, - ._tmxbr = &TM9BR, - ._tmicr = &TM9ICR, - .tm_irq = TM9IRQ, - .div_timer = MNSCx_DIV_TIMER_16BIT, -#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) - .tm_name = "ttySM1:Timer3", - ._tmxmd = &TM3MD, - ._tmxbr = (volatile u16 *)&TM3BR, - ._tmicr = &TM3ICR, - .tm_irq = TM3IRQ, - .div_timer = MNSCx_DIV_TIMER_8BIT, -#elif defined(CONFIG_MN10300_TTYSM1_TIMER12) - .tm_name = "ttySM1/Timer12", - ._tmxmd = &TM12MD, - ._tmxbr = &TM12BR, - ._tmicr = &TM12ICR, - .tm_irq = TM12IRQ, - .div_timer = MNSCx_DIV_TIMER_16BIT, -#else -#error "Unknown config for ttySM1" -#endif - .rx_irq = SC1RXIRQ, - .tx_irq = SC1TXIRQ, - .rx_icr = &GxICR(SC1RXIRQ), - .tx_icr = &GxICR(SC1TXIRQ), - .clock_src = MNSCx_CLOCK_SRC_IOCLK, - .options = 0, -#ifdef CONFIG_GDBSTUB_ON_TTYSM1 - .gdbstub = 1, -#endif -}; -#endif /* CONFIG_MN10300_TTYSM1 */ - -/* - * the third on-chip serial port: ttySM2 (aka SIF2) - */ -#ifdef CONFIG_MN10300_TTYSM2 -struct mn10300_serial_port mn10300_serial_port_sif2 = { - .uart.ops = &mn10300_serial_ops, - .uart.membase = (void __iomem *) &SC2CTR, - .uart.mapbase = (unsigned long) &SC2CTR, - .uart.iotype = UPIO_MEM, - .uart.irq = 0, - .uart.uartclk = 0, /* MN10300_IOCLK, */ - .uart.fifosize = 1, - .uart.flags = UPF_BOOT_AUTOCONF, - .uart.line = 2, -#ifdef CONFIG_MN10300_TTYSM2_CTS - .uart.type = PORT_MN10300_CTS, -#else - .uart.type = PORT_MN10300, -#endif - .uart.lock = - __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock), - .name = "ttySM2", - ._iobase = &SC2CTR, - ._control = &SC2CTR, - ._status = (volatile u8 *)&SC2STR, - ._intr = &SC2ICR, - ._rxb = &SC2RXB, - ._txb = &SC2TXB, - .rx_name = "ttySM2:Rx", - .tx_name = "ttySM2:Tx", -#if defined(CONFIG_MN10300_TTYSM2_TIMER10) - .tm_name = "ttySM2/Timer10", - ._tmxmd = &TM10MD, - ._tmxbr = &TM10BR, - ._tmicr = &TM10ICR, - .tm_irq = TM10IRQ, - .div_timer = MNSCx_DIV_TIMER_16BIT, -#elif defined(CONFIG_MN10300_TTYSM2_TIMER9) - .tm_name = "ttySM2/Timer9", - ._tmxmd = &TM9MD, - ._tmxbr = &TM9BR, - ._tmicr = &TM9ICR, - .tm_irq = TM9IRQ, - .div_timer = MNSCx_DIV_TIMER_16BIT, -#elif defined(CONFIG_MN10300_TTYSM2_TIMER1) - .tm_name = "ttySM2/Timer1", - ._tmxmd = &TM1MD, - ._tmxbr = (volatile u16 *)&TM1BR, - ._tmicr = &TM1ICR, - .tm_irq = TM1IRQ, - .div_timer = MNSCx_DIV_TIMER_8BIT, -#elif defined(CONFIG_MN10300_TTYSM2_TIMER3) - .tm_name = "ttySM2/Timer3", - ._tmxmd = &TM3MD, - ._tmxbr = (volatile u16 *)&TM3BR, - ._tmicr = &TM3ICR, - .tm_irq = TM3IRQ, - .div_timer = MNSCx_DIV_TIMER_8BIT, -#else -#error "Unknown config for ttySM2" -#endif - .rx_irq = SC2RXIRQ, - .tx_irq = SC2TXIRQ, - .rx_icr = &GxICR(SC2RXIRQ), - .tx_icr = &GxICR(SC2TXIRQ), - .clock_src = MNSCx_CLOCK_SRC_IOCLK, -#ifdef CONFIG_MN10300_TTYSM2_CTS - .options = MNSCx_OPT_CTS, -#else - .options = 0, -#endif -#ifdef CONFIG_GDBSTUB_ON_TTYSM2 - .gdbstub = 1, -#endif -}; -#endif /* CONFIG_MN10300_TTYSM2 */ - - -/* - * list of available serial ports - */ -struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = { -#ifdef CONFIG_MN10300_TTYSM0 - [0] = &mn10300_serial_port_sif0, -#endif -#ifdef CONFIG_MN10300_TTYSM1 - [1] = &mn10300_serial_port_sif1, -#endif -#ifdef CONFIG_MN10300_TTYSM2 - [2] = &mn10300_serial_port_sif2, -#endif - [NR_UARTS] = NULL, -}; - - -/* - * we abuse the serial ports' baud timers' interrupt lines to get the ability - * to deliver interrupts to userspace as we use the ports' interrupt lines to - * do virtual DMA on account of the ports having no hardware FIFOs - * - * we can generate an interrupt manually in the assembly stubs by writing to - * the enable and detect bits in the interrupt control register, so all we need - * to do here is disable the interrupt line - * - * note that we can't just leave the line enabled as the baud rate timer *also* - * generates interrupts - */ -static void mn10300_serial_mask_ack(unsigned int irq) -{ - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - GxICR(irq) = GxICR_LEVEL_6; - tmp = GxICR(irq); /* flush write buffer */ - arch_local_irq_restore(flags); -} - -static void mn10300_serial_chip_mask_ack(struct irq_data *d) -{ - mn10300_serial_mask_ack(d->irq); -} - -static void mn10300_serial_nop(struct irq_data *d) -{ -} - -static struct irq_chip mn10300_serial_pic = { - .name = "mnserial", - .irq_ack = mn10300_serial_chip_mask_ack, - .irq_mask = mn10300_serial_chip_mask_ack, - .irq_mask_ack = mn10300_serial_chip_mask_ack, - .irq_unmask = mn10300_serial_nop, -}; - -static void mn10300_serial_low_mask(struct irq_data *d) -{ - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - GxICR(d->irq) = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); - tmp = GxICR(d->irq); /* flush write buffer */ - arch_local_irq_restore(flags); -} - -static void mn10300_serial_low_unmask(struct irq_data *d) -{ - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - GxICR(d->irq) = - NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | GxICR_ENABLE; - tmp = GxICR(d->irq); /* flush write buffer */ - arch_local_irq_restore(flags); -} - -static struct irq_chip mn10300_serial_low_pic = { - .name = "mnserial-low", - .irq_mask = mn10300_serial_low_mask, - .irq_unmask = mn10300_serial_low_unmask, -}; - -/* - * serial virtual DMA interrupt jump table - */ -struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS]; - -static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port) -{ - int retries = 100; - u16 x; - - /* nothing to do if irq isn't set up */ - if (!mn10300_serial_int_tbl[port->tx_irq].port) - return; - - port->tx_flags |= MNSCx_TX_STOP; - mb(); - - /* - * Here we wait for the irq to be disabled. Either it already is - * disabled or we wait some number of retries for the VDMA handler - * to disable it. The retries give the VDMA handler enough time to - * run to completion if it was already in progress. If the VDMA IRQ - * is enabled but the handler is not yet running when arrive here, - * the STOP flag will prevent the handler from conflicting with the - * driver code following this loop. - */ - while ((*port->tx_icr & GxICR_ENABLE) && retries-- > 0) - ; - if (retries <= 0) { - *port->tx_icr = - NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); - x = *port->tx_icr; - } -} - -static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port) -{ - u16 x; - - /* nothing to do if irq isn't set up */ - if (!mn10300_serial_int_tbl[port->tx_irq].port) - return; - - /* stop vdma irq if not already stopped */ - if (!(port->tx_flags & MNSCx_TX_STOP)) - mn10300_serial_dis_tx_intr(port); - - port->tx_flags &= ~MNSCx_TX_STOP; - mb(); - - *port->tx_icr = - NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | - GxICR_ENABLE | GxICR_REQUEST | GxICR_DETECT; - x = *port->tx_icr; -} - -static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port) -{ - unsigned long flags; - u16 x; - - flags = arch_local_cli_save(); - *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); - x = *port->rx_icr; - arch_local_irq_restore(flags); -} - -/* - * multi-bit equivalent of test_and_clear_bit() - */ -static int mask_test_and_clear(volatile u8 *ptr, u8 mask) -{ - u32 epsw; - asm volatile(" bclr %1,(%2) \n" - " mov epsw,%0 \n" - : "=d"(epsw) : "d"(mask), "a"(ptr) - : "cc", "memory"); - return !(epsw & EPSW_FLAG_Z); -} - -/* - * receive chars from the ring buffer for this serial port - * - must do break detection here (not done in the UART) - */ -static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port) -{ - struct uart_icount *icount = &port->uart.icount; - struct tty_port *tport = &port->uart.state->port; - unsigned ix; - int count; - u8 st, ch, push, status, overrun; - - _enter("%s", port->name); - - push = 0; - - count = CIRC_CNT(port->rx_inp, port->rx_outp, MNSC_BUFFER_SIZE); - count = tty_buffer_request_room(tport, count); - if (count == 0) { - if (!tport->low_latency) - tty_flip_buffer_push(tport); - return; - } - -try_again: - /* pull chars out of the hat */ - ix = READ_ONCE(port->rx_outp); - if (CIRC_CNT(port->rx_inp, ix, MNSC_BUFFER_SIZE) == 0) { - if (push && !tport->low_latency) - tty_flip_buffer_push(tport); - return; - } - - /* READ_ONCE() enforces dependency, but dangerous through integer!!! */ - ch = port->rx_buffer[ix++]; - st = port->rx_buffer[ix++]; - smp_mb(); - port->rx_outp = ix & (MNSC_BUFFER_SIZE - 1); - port->uart.icount.rx++; - - st &= SC01STR_FEF | SC01STR_PEF | SC01STR_OEF; - status = 0; - overrun = 0; - - /* the UART doesn't detect BREAK, so we have to do that ourselves - * - it starts as a framing error on a NUL character - * - then we count another two NUL characters before issuing TTY_BREAK - * - then we end on a normal char or one that has all the bottom bits - * zero and the top bits set - */ - switch (port->rx_brk) { - case 0: - /* not breaking at the moment */ - break; - - case 1: - if (st & SC01STR_FEF && ch == 0) { - port->rx_brk = 2; - goto try_again; - } - goto not_break; - - case 2: - if (st & SC01STR_FEF && ch == 0) { - port->rx_brk = 3; - _proto("Rx Break Detected"); - icount->brk++; - if (uart_handle_break(&port->uart)) - goto ignore_char; - status |= 1 << TTY_BREAK; - goto insert; - } - goto not_break; - - default: - if (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF)) - goto try_again; /* still breaking */ - - port->rx_brk = 0; /* end of the break */ - - switch (ch) { - case 0xFF: - case 0xFE: - case 0xFC: - case 0xF8: - case 0xF0: - case 0xE0: - case 0xC0: - case 0x80: - case 0x00: - /* discard char at probable break end */ - goto try_again; - } - break; - } - -process_errors: - /* handle framing error */ - if (st & SC01STR_FEF) { - if (ch == 0) { - /* framing error with NUL char is probably a BREAK */ - port->rx_brk = 1; - goto try_again; - } - - _proto("Rx Framing Error"); - icount->frame++; - status |= 1 << TTY_FRAME; - } - - /* handle parity error */ - if (st & SC01STR_PEF) { - _proto("Rx Parity Error"); - icount->parity++; - status = TTY_PARITY; - } - - /* handle normal char */ - if (status == 0) { - if (uart_handle_sysrq_char(&port->uart, ch)) - goto ignore_char; - status = (1 << TTY_NORMAL); - } - - /* handle overrun error */ - if (st & SC01STR_OEF) { - if (port->rx_brk) - goto try_again; - - _proto("Rx Overrun Error"); - icount->overrun++; - overrun = 1; - } - -insert: - status &= port->uart.read_status_mask; - - if (!overrun && !(status & port->uart.ignore_status_mask)) { - int flag; - - if (status & (1 << TTY_BREAK)) - flag = TTY_BREAK; - else if (status & (1 << TTY_PARITY)) - flag = TTY_PARITY; - else if (status & (1 << TTY_FRAME)) - flag = TTY_FRAME; - else - flag = TTY_NORMAL; - - tty_insert_flip_char(tport, ch, flag); - } - - /* overrun is special, since it's reported immediately, and doesn't - * affect the current character - */ - if (overrun) - tty_insert_flip_char(tport, 0, TTY_OVERRUN); - - count--; - if (count <= 0) { - if (!tport->low_latency) - tty_flip_buffer_push(tport); - return; - } - -ignore_char: - push = 1; - goto try_again; - -not_break: - port->rx_brk = 0; - goto process_errors; -} - -/* - * handle an interrupt from the serial transmission "virtual DMA" driver - * - note: the interrupt routine will disable its own interrupts when the Tx - * buffer is empty - */ -static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port) -{ - _enter("%s", port->name); - - if (!port->uart.state || !port->uart.state->port.tty) { - mn10300_serial_dis_tx_intr(port); - return; - } - - if (uart_tx_stopped(&port->uart) || - uart_circ_empty(&port->uart.state->xmit)) - mn10300_serial_dis_tx_intr(port); - - if (uart_circ_chars_pending(&port->uart.state->xmit) < WAKEUP_CHARS) - uart_write_wakeup(&port->uart); -} - -/* - * deal with a change in the status of the CTS line - */ -static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st) -{ - u16 ctr; - - port->tx_cts = st; - port->uart.icount.cts++; - - /* flip the CTS state selector flag to interrupt when it changes - * back */ - ctr = *port->_control; - ctr ^= SC2CTR_TWS; - *port->_control = ctr; - - uart_handle_cts_change(&port->uart, st & SC2STR_CTS); - wake_up_interruptible(&port->uart.state->port.delta_msr_wait); -} - -/* - * handle a virtual interrupt generated by the lower level "virtual DMA" - * routines (irq is the baud timer interrupt) - */ -static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id) -{ - struct mn10300_serial_port *port = dev_id; - u8 st; - - spin_lock(&port->uart.lock); - - if (port->intr_flags) { - _debug("INT %s: %x", port->name, port->intr_flags); - - if (mask_test_and_clear(&port->intr_flags, MNSCx_RX_AVAIL)) - mn10300_serial_receive_interrupt(port); - - if (mask_test_and_clear(&port->intr_flags, - MNSCx_TX_SPACE | MNSCx_TX_EMPTY)) - mn10300_serial_transmit_interrupt(port); - } - - /* the only modem control line amongst the whole lot is CTS on - * serial port 2 */ - if (port->type == PORT_MN10300_CTS) { - st = *port->_status; - if ((port->tx_cts ^ st) & SC2STR_CTS) - mn10300_serial_cts_changed(port, st); - } - - spin_unlock(&port->uart.lock); - - return IRQ_HANDLED; -} - -/* - * return indication of whether the hardware transmit buffer is empty - */ -static unsigned int mn10300_serial_tx_empty(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s", port->name); - - return (*port->_status & (SC01STR_TXF | SC01STR_TBF)) ? - 0 : TIOCSER_TEMT; -} - -/* - * set the modem control lines (we don't have any) - */ -static void mn10300_serial_set_mctrl(struct uart_port *_port, - unsigned int mctrl) -{ - struct mn10300_serial_port *port __attribute__ ((unused)) = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s,%x", port->name, mctrl); -} - -/* - * get the modem control line statuses - */ -static unsigned int mn10300_serial_get_mctrl(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s", port->name); - - if (port->type == PORT_MN10300_CTS && !(*port->_status & SC2STR_CTS)) - return TIOCM_CAR | TIOCM_DSR; - - return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR; -} - -/* - * stop transmitting characters - */ -static void mn10300_serial_stop_tx(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s", port->name); - - /* disable the virtual DMA */ - mn10300_serial_dis_tx_intr(port); -} - -/* - * start transmitting characters - * - jump-start transmission if it has stalled - * - enable the serial Tx interrupt (used by the virtual DMA controller) - * - force an interrupt to happen if necessary - */ -static void mn10300_serial_start_tx(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s{%lu}", - port->name, - CIRC_CNT(&port->uart.state->xmit.head, - &port->uart.state->xmit.tail, - UART_XMIT_SIZE)); - - /* kick the virtual DMA controller */ - mn10300_serial_en_tx_intr(port); - - _debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx", - *port->_control, *port->_intr, *port->_status, - *port->_tmxmd, - (port->div_timer == MNSCx_DIV_TIMER_8BIT) ? - *(volatile u8 *)port->_tmxbr : *port->_tmxbr, - *port->tx_icr); -} - -/* - * transmit a high-priority XON/XOFF character - */ -static void mn10300_serial_send_xchar(struct uart_port *_port, char ch) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - unsigned long flags; - - _enter("%s,%02x", port->name, ch); - - if (likely(port->gdbstub)) { - port->tx_xchar = ch; - if (ch) { - spin_lock_irqsave(&port->uart.lock, flags); - mn10300_serial_en_tx_intr(port); - spin_unlock_irqrestore(&port->uart.lock, flags); - } - } -} - -/* - * stop receiving characters - * - called whilst the port is being closed - */ -static void mn10300_serial_stop_rx(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - u16 ctr; - - _enter("%s", port->name); - - ctr = *port->_control; - ctr &= ~SC01CTR_RXE; - *port->_control = ctr; - - mn10300_serial_dis_rx_intr(port); -} - -/* - * enable modem status interrupts - */ -static void mn10300_serial_enable_ms(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - u16 ctr, cts; - - _enter("%s", port->name); - - if (port->type == PORT_MN10300_CTS) { - /* want to interrupt when CTS goes low if CTS is now high and - * vice versa - */ - port->tx_cts = *port->_status; - - cts = (port->tx_cts & SC2STR_CTS) ? - SC2CTR_TWE : SC2CTR_TWE | SC2CTR_TWS; - - ctr = *port->_control; - ctr &= ~SC2CTR_TWS; - ctr |= cts; - *port->_control = ctr; - - mn10300_serial_en_tx_intr(port); - } -} - -/* - * transmit or cease transmitting a break signal - */ -static void mn10300_serial_break_ctl(struct uart_port *_port, int ctl) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - unsigned long flags; - - _enter("%s,%d", port->name, ctl); - - spin_lock_irqsave(&port->uart.lock, flags); - if (ctl) { - /* tell the virtual DMA handler to assert BREAK */ - port->tx_flags |= MNSCx_TX_BREAK; - mn10300_serial_en_tx_intr(port); - } else { - port->tx_flags &= ~MNSCx_TX_BREAK; - *port->_control &= ~SC01CTR_BKE; - mn10300_serial_en_tx_intr(port); - } - spin_unlock_irqrestore(&port->uart.lock, flags); -} - -/* - * grab the interrupts and enable the port for reception - */ -static int mn10300_serial_startup(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - struct mn10300_serial_int *pint; - - _enter("%s{%d}", port->name, port->gdbstub); - - if (unlikely(port->gdbstub)) - return -EBUSY; - - /* allocate an Rx buffer for the virtual DMA handler */ - port->rx_buffer = kmalloc(MNSC_BUFFER_SIZE, GFP_KERNEL); - if (!port->rx_buffer) - return -ENOMEM; - - port->rx_inp = port->rx_outp = 0; - port->tx_flags = 0; - - /* finally, enable the device */ - *port->_intr = SC01ICR_TI; - *port->_control |= SC01CTR_TXE | SC01CTR_RXE; - - pint = &mn10300_serial_int_tbl[port->rx_irq]; - pint->port = port; - pint->vdma = mn10300_serial_vdma_rx_handler; - pint = &mn10300_serial_int_tbl[port->tx_irq]; - pint->port = port; - pint->vdma = mn10300_serial_vdma_tx_handler; - - irq_set_chip(port->rx_irq, &mn10300_serial_low_pic); - irq_set_chip(port->tx_irq, &mn10300_serial_low_pic); - irq_set_chip(port->tm_irq, &mn10300_serial_pic); - - if (request_irq(port->rx_irq, mn10300_serial_interrupt, - IRQF_NOBALANCING, - port->rx_name, port) < 0) - goto error; - - if (request_irq(port->tx_irq, mn10300_serial_interrupt, - IRQF_NOBALANCING, - port->tx_name, port) < 0) - goto error2; - - if (request_irq(port->tm_irq, mn10300_serial_interrupt, - IRQF_NOBALANCING, - port->tm_name, port) < 0) - goto error3; - mn10300_serial_mask_ack(port->tm_irq); - - return 0; - -error3: - free_irq(port->tx_irq, port); -error2: - free_irq(port->rx_irq, port); -error: - kfree(port->rx_buffer); - port->rx_buffer = NULL; - return -EBUSY; -} - -/* - * shutdown the port and release interrupts - */ -static void mn10300_serial_shutdown(struct uart_port *_port) -{ - unsigned long flags; - u16 x; - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s", port->name); - - spin_lock_irqsave(&_port->lock, flags); - mn10300_serial_dis_tx_intr(port); - - *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); - x = *port->rx_icr; - port->tx_flags = 0; - spin_unlock_irqrestore(&_port->lock, flags); - - /* disable the serial port and its baud rate timer */ - *port->_control &= ~(SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE); - *port->_tmxmd = 0; - - if (port->rx_buffer) { - void *buf = port->rx_buffer; - port->rx_buffer = NULL; - kfree(buf); - } - - /* disable all intrs */ - free_irq(port->tm_irq, port); - free_irq(port->rx_irq, port); - free_irq(port->tx_irq, port); - - mn10300_serial_int_tbl[port->tx_irq].port = NULL; - mn10300_serial_int_tbl[port->rx_irq].port = NULL; -} - -/* - * this routine is called to set the UART divisor registers to match the - * specified baud rate for a serial port. - */ -static void mn10300_serial_change_speed(struct mn10300_serial_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned long flags; - unsigned long ioclk = port->ioclk; - unsigned cflag; - int baud, bits, xdiv, tmp; - u16 tmxbr, scxctr; - u8 tmxmd, battempt; - u8 div_timer = port->div_timer; - - _enter("%s{%lu}", port->name, ioclk); - - /* byte size and parity */ - cflag = new->c_cflag; - switch (cflag & CSIZE) { - case CS7: scxctr = SC01CTR_CLN_7BIT; bits = 9; break; - case CS8: scxctr = SC01CTR_CLN_8BIT; bits = 10; break; - default: scxctr = SC01CTR_CLN_8BIT; bits = 10; break; - } - - if (cflag & CSTOPB) { - scxctr |= SC01CTR_STB_2BIT; - bits++; - } - - if (cflag & PARENB) { - bits++; - if (cflag & PARODD) - scxctr |= SC01CTR_PB_ODD; -#ifdef CMSPAR - else if (cflag & CMSPAR) - scxctr |= SC01CTR_PB_FIXED0; -#endif - else - scxctr |= SC01CTR_PB_EVEN; - } - - /* Determine divisor based on baud rate */ - battempt = 0; - - switch (port->uart.line) { -#ifdef CONFIG_MN10300_TTYSM0 - case 0: /* ttySM0 */ -#if defined(CONFIG_MN10300_TTYSM0_TIMER8) - scxctr |= SC0CTR_CK_TM8UFLOW_8; -#elif defined(CONFIG_MN10300_TTYSM0_TIMER0) - scxctr |= SC0CTR_CK_TM0UFLOW_8; -#elif defined(CONFIG_MN10300_TTYSM0_TIMER2) - scxctr |= SC0CTR_CK_TM2UFLOW_8; -#else -#error "Unknown config for ttySM0" -#endif - break; -#endif /* CONFIG_MN10300_TTYSM0 */ - -#ifdef CONFIG_MN10300_TTYSM1 - case 1: /* ttySM1 */ -#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) -#if defined(CONFIG_MN10300_TTYSM1_TIMER9) - scxctr |= SC1CTR_CK_TM9UFLOW_8; -#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) - scxctr |= SC1CTR_CK_TM3UFLOW_8; -#else -#error "Unknown config for ttySM1" -#endif -#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ -#if defined(CONFIG_MN10300_TTYSM1_TIMER12) - scxctr |= SC1CTR_CK_TM12UFLOW_8; -#else -#error "Unknown config for ttySM1" -#endif -#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ - break; -#endif /* CONFIG_MN10300_TTYSM1 */ - -#ifdef CONFIG_MN10300_TTYSM2 - case 2: /* ttySM2 */ -#if defined(CONFIG_AM33_2) -#if defined(CONFIG_MN10300_TTYSM2_TIMER10) - scxctr |= SC2CTR_CK_TM10UFLOW; -#else -#error "Unknown config for ttySM2" -#endif -#else /* CONFIG_AM33_2 */ -#if defined(CONFIG_MN10300_TTYSM2_TIMER9) - scxctr |= SC2CTR_CK_TM9UFLOW_8; -#elif defined(CONFIG_MN10300_TTYSM2_TIMER1) - scxctr |= SC2CTR_CK_TM1UFLOW_8; -#elif defined(CONFIG_MN10300_TTYSM2_TIMER3) - scxctr |= SC2CTR_CK_TM3UFLOW_8; -#else -#error "Unknown config for ttySM2" -#endif -#endif /* CONFIG_AM33_2 */ - break; -#endif /* CONFIG_MN10300_TTYSM2 */ - - default: - break; - } - -try_alternative: - baud = uart_get_baud_rate(&port->uart, new, old, 0, - port->ioclk / 8); - - _debug("ALT %d [baud %d]", battempt, baud); - - if (!baud) - baud = 9600; /* B0 transition handled in rs_set_termios */ - xdiv = 1; - if (baud == 134) { - baud = 269; /* 134 is really 134.5 */ - xdiv = 2; - } - - if (baud == 38400 && - (port->uart.flags & UPF_SPD_MASK) == UPF_SPD_CUST - ) { - _debug("CUSTOM %u", port->uart.custom_divisor); - - if (div_timer == MNSCx_DIV_TIMER_16BIT) { - if (port->uart.custom_divisor <= 65535) { - tmxmd = TM8MD_SRC_IOCLK; - tmxbr = port->uart.custom_divisor; - port->uart.uartclk = ioclk; - goto timer_okay; - } - if (port->uart.custom_divisor / 8 <= 65535) { - tmxmd = TM8MD_SRC_IOCLK_8; - tmxbr = port->uart.custom_divisor / 8; - port->uart.custom_divisor = tmxbr * 8; - port->uart.uartclk = ioclk / 8; - goto timer_okay; - } - if (port->uart.custom_divisor / 32 <= 65535) { - tmxmd = TM8MD_SRC_IOCLK_32; - tmxbr = port->uart.custom_divisor / 32; - port->uart.custom_divisor = tmxbr * 32; - port->uart.uartclk = ioclk / 32; - goto timer_okay; - } - - } else if (div_timer == MNSCx_DIV_TIMER_8BIT) { - if (port->uart.custom_divisor <= 255) { - tmxmd = TM2MD_SRC_IOCLK; - tmxbr = port->uart.custom_divisor; - port->uart.uartclk = ioclk; - goto timer_okay; - } - if (port->uart.custom_divisor / 8 <= 255) { - tmxmd = TM2MD_SRC_IOCLK_8; - tmxbr = port->uart.custom_divisor / 8; - port->uart.custom_divisor = tmxbr * 8; - port->uart.uartclk = ioclk / 8; - goto timer_okay; - } - if (port->uart.custom_divisor / 32 <= 255) { - tmxmd = TM2MD_SRC_IOCLK_32; - tmxbr = port->uart.custom_divisor / 32; - port->uart.custom_divisor = tmxbr * 32; - port->uart.uartclk = ioclk / 32; - goto timer_okay; - } - } - } - - switch (div_timer) { - case MNSCx_DIV_TIMER_16BIT: - port->uart.uartclk = ioclk; - tmxmd = TM8MD_SRC_IOCLK; - tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 65535) - goto timer_okay; - - port->uart.uartclk = ioclk / 8; - tmxmd = TM8MD_SRC_IOCLK_8; - tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 65535) - goto timer_okay; - - port->uart.uartclk = ioclk / 32; - tmxmd = TM8MD_SRC_IOCLK_32; - tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 65535) - goto timer_okay; - break; - - case MNSCx_DIV_TIMER_8BIT: - port->uart.uartclk = ioclk; - tmxmd = TM2MD_SRC_IOCLK; - tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 255) - goto timer_okay; - - port->uart.uartclk = ioclk / 8; - tmxmd = TM2MD_SRC_IOCLK_8; - tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 255) - goto timer_okay; - - port->uart.uartclk = ioclk / 32; - tmxmd = TM2MD_SRC_IOCLK_32; - tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1; - if (tmp > 0 && tmp <= 255) - goto timer_okay; - break; - - default: - BUG(); - return; - } - - /* refuse to change to a baud rate we can't support */ - _debug("CAN'T SUPPORT"); - - switch (battempt) { - case 0: - if (old) { - new->c_cflag &= ~CBAUD; - new->c_cflag |= (old->c_cflag & CBAUD); - battempt = 1; - goto try_alternative; - } - - case 1: - /* as a last resort, if the quotient is zero, default to 9600 - * bps */ - new->c_cflag &= ~CBAUD; - new->c_cflag |= B9600; - battempt = 2; - goto try_alternative; - - default: - /* hmmm... can't seem to support 9600 either - * - we could try iterating through the speeds we know about to - * find the lowest - */ - new->c_cflag &= ~CBAUD; - new->c_cflag |= B0; - - if (div_timer == MNSCx_DIV_TIMER_16BIT) - tmxmd = TM8MD_SRC_IOCLK_32; - else if (div_timer == MNSCx_DIV_TIMER_8BIT) - tmxmd = TM2MD_SRC_IOCLK_32; - tmxbr = 1; - - port->uart.uartclk = ioclk / 32; - break; - } -timer_okay: - - _debug("UARTCLK: %u / %hu", port->uart.uartclk, tmxbr); - - /* make the changes */ - spin_lock_irqsave(&port->uart.lock, flags); - - uart_update_timeout(&port->uart, new->c_cflag, baud); - - /* set the timer to produce the required baud rate */ - switch (div_timer) { - case MNSCx_DIV_TIMER_16BIT: - *port->_tmxmd = 0; - *port->_tmxbr = tmxbr; - *port->_tmxmd = TM8MD_INIT_COUNTER; - *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE; - break; - - case MNSCx_DIV_TIMER_8BIT: - *port->_tmxmd = 0; - *(volatile u8 *) port->_tmxbr = (u8) tmxbr; - *port->_tmxmd = TM2MD_INIT_COUNTER; - *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE; - break; - } - - /* CTS flow control flag and modem status interrupts */ - scxctr &= ~(SC2CTR_TWE | SC2CTR_TWS); - - if (port->type == PORT_MN10300_CTS && cflag & CRTSCTS) { - /* want to interrupt when CTS goes low if CTS is now - * high and vice versa - */ - port->tx_cts = *port->_status; - - if (port->tx_cts & SC2STR_CTS) - scxctr |= SC2CTR_TWE; - else - scxctr |= SC2CTR_TWE | SC2CTR_TWS; - } - - /* set up parity check flag */ - port->uart.read_status_mask = (1 << TTY_NORMAL) | (1 << TTY_OVERRUN); - if (new->c_iflag & INPCK) - port->uart.read_status_mask |= - (1 << TTY_PARITY) | (1 << TTY_FRAME); - if (new->c_iflag & (BRKINT | PARMRK)) - port->uart.read_status_mask |= (1 << TTY_BREAK); - - /* characters to ignore */ - port->uart.ignore_status_mask = 0; - if (new->c_iflag & IGNPAR) - port->uart.ignore_status_mask |= - (1 << TTY_PARITY) | (1 << TTY_FRAME); - if (new->c_iflag & IGNBRK) { - port->uart.ignore_status_mask |= (1 << TTY_BREAK); - /* - * If we're ignoring parity and break indicators, - * ignore overruns to (for real raw support). - */ - if (new->c_iflag & IGNPAR) - port->uart.ignore_status_mask |= (1 << TTY_OVERRUN); - } - - /* Ignore all characters if CREAD is not set */ - if ((new->c_cflag & CREAD) == 0) - port->uart.ignore_status_mask |= (1 << TTY_NORMAL); - - scxctr |= SC01CTR_TXE | SC01CTR_RXE; - scxctr |= *port->_control & SC01CTR_BKE; - *port->_control = scxctr; - - spin_unlock_irqrestore(&port->uart.lock, flags); -} - -/* - * set the terminal I/O parameters - */ -static void mn10300_serial_set_termios(struct uart_port *_port, - struct ktermios *new, - struct ktermios *old) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s,%p,%p", port->name, new, old); - - mn10300_serial_change_speed(port, new, old); - - /* handle turning off CRTSCTS */ - if (!(new->c_cflag & CRTSCTS)) { - u16 ctr = *port->_control; - ctr &= ~SC2CTR_TWE; - *port->_control = ctr; - } - - /* change Transfer bit-order (LSB/MSB) */ - if (new->c_cflag & CODMSB) - *port->_control |= SC01CTR_OD_MSBFIRST; /* MSB MODE */ - else - *port->_control &= ~SC01CTR_OD_MSBFIRST; /* LSB MODE */ -} - -/* - * return description of port type - */ -static const char *mn10300_serial_type(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - if (port->uart.type == PORT_MN10300_CTS) - return "MN10300 SIF_CTS"; - - return "MN10300 SIF"; -} - -/* - * release I/O and memory regions in use by port - */ -static void mn10300_serial_release_port(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s", port->name); - - release_mem_region((unsigned long) port->_iobase, 16); -} - -/* - * request I/O and memory regions for port - */ -static int mn10300_serial_request_port(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s", port->name); - - request_mem_region((unsigned long) port->_iobase, 16, port->name); - return 0; -} - -/* - * configure the type and reserve the ports - */ -static void mn10300_serial_config_port(struct uart_port *_port, int type) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - - _enter("%s", port->name); - - port->uart.type = PORT_MN10300; - - if (port->options & MNSCx_OPT_CTS) - port->uart.type = PORT_MN10300_CTS; - - mn10300_serial_request_port(_port); -} - -/* - * verify serial parameters are suitable for this port type - */ -static int mn10300_serial_verify_port(struct uart_port *_port, - struct serial_struct *ss) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - void *mapbase = (void *) (unsigned long) port->uart.mapbase; - - _enter("%s", port->name); - - /* these things may not be changed */ - if (ss->irq != port->uart.irq || - ss->port != port->uart.iobase || - ss->io_type != port->uart.iotype || - ss->iomem_base != mapbase || - ss->iomem_reg_shift != port->uart.regshift || - ss->hub6 != port->uart.hub6 || - ss->xmit_fifo_size != port->uart.fifosize) - return -EINVAL; - - /* type may be changed on a port that supports CTS */ - if (ss->type != port->uart.type) { - if (!(port->options & MNSCx_OPT_CTS)) - return -EINVAL; - - if (ss->type != PORT_MN10300 && - ss->type != PORT_MN10300_CTS) - return -EINVAL; - } - - return 0; -} - -/* - * initialise the MN10300 on-chip UARTs - */ -static int __init mn10300_serial_init(void) -{ - struct mn10300_serial_port *port; - int ret, i; - - printk(KERN_INFO "%s version %s (%s)\n", - serial_name, serial_version, serial_revdate); - -#if defined(CONFIG_MN10300_TTYSM2) && defined(CONFIG_AM33_2) - { - int tmp; - SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */ - tmp = SC2TIM; - } -#endif - - set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL), - mn10300_serial_vdma_interrupt); - - ret = uart_register_driver(&mn10300_serial_driver); - if (!ret) { - for (i = 0 ; i < NR_PORTS ; i++) { - port = mn10300_serial_ports[i]; - if (!port || port->gdbstub) - continue; - - switch (port->clock_src) { - case MNSCx_CLOCK_SRC_IOCLK: - port->ioclk = MN10300_IOCLK; - break; - -#ifdef MN10300_IOBCLK - case MNSCx_CLOCK_SRC_IOBCLK: - port->ioclk = MN10300_IOBCLK; - break; -#endif - default: - BUG(); - } - - ret = uart_add_one_port(&mn10300_serial_driver, - &port->uart); - - if (ret < 0) { - _debug("ERROR %d", -ret); - break; - } - } - - if (ret) - uart_unregister_driver(&mn10300_serial_driver); - } - - return ret; -} - -__initcall(mn10300_serial_init); - - -#ifdef CONFIG_MN10300_TTYSM_CONSOLE - -/* - * print a string to the serial port without disturbing the real user of the - * port too much - * - the console must be locked by the caller - */ -static void mn10300_serial_console_write(struct console *co, - const char *s, unsigned count) -{ - struct mn10300_serial_port *port; - unsigned i; - u16 scxctr; - u8 tmxmd; - unsigned long flags; - int locked = 1; - - port = mn10300_serial_ports[co->index]; - - local_irq_save(flags); - if (port->uart.sysrq) { - /* mn10300_serial_interrupt() already took the lock */ - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->uart.lock); - } else - spin_lock(&port->uart.lock); - - /* firstly hijack the serial port from the "virtual DMA" controller */ - mn10300_serial_dis_tx_intr(port); - - /* the transmitter may be disabled */ - scxctr = *port->_control; - if (!(scxctr & SC01CTR_TXE)) { - /* restart the UART clock */ - tmxmd = *port->_tmxmd; - - switch (port->div_timer) { - case MNSCx_DIV_TIMER_16BIT: - *port->_tmxmd = 0; - *port->_tmxmd = TM8MD_INIT_COUNTER; - *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE; - break; - - case MNSCx_DIV_TIMER_8BIT: - *port->_tmxmd = 0; - *port->_tmxmd = TM2MD_INIT_COUNTER; - *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE; - break; - } - - /* enable the transmitter */ - *port->_control = (scxctr & ~SC01CTR_BKE) | SC01CTR_TXE; - - } else if (scxctr & SC01CTR_BKE) { - /* stop transmitting BREAK */ - *port->_control = (scxctr & ~SC01CTR_BKE); - } - - /* send the chars into the serial port (with LF -> LFCR conversion) */ - for (i = 0; i < count; i++) { - char ch = *s++; - - while (*port->_status & SC01STR_TBF) - continue; - *port->_txb = ch; - - if (ch == 0x0a) { - while (*port->_status & SC01STR_TBF) - continue; - *port->_txb = 0xd; - } - } - - /* can't let the transmitter be turned off if it's actually - * transmitting */ - while (*port->_status & (SC01STR_TXF | SC01STR_TBF)) - continue; - - /* disable the transmitter if we re-enabled it */ - if (!(scxctr & SC01CTR_TXE)) - *port->_control = scxctr; - - mn10300_serial_en_tx_intr(port); - - if (locked) - spin_unlock(&port->uart.lock); - local_irq_restore(flags); -} - -/* - * set up a serial port as a console - * - construct a cflag setting for the first rs_open() - * - initialize the serial port - * - return non-zero if we didn't find a serial port. - */ -static int __init mn10300_serial_console_setup(struct console *co, - char *options) -{ - struct mn10300_serial_port *port; - int i, parity = 'n', baud = 9600, bits = 8, flow = 0; - - for (i = 0 ; i < NR_PORTS ; i++) { - port = mn10300_serial_ports[i]; - if (port && !port->gdbstub && port->uart.line == co->index) - goto found_device; - } - - return -ENODEV; - -found_device: - switch (port->clock_src) { - case MNSCx_CLOCK_SRC_IOCLK: - port->ioclk = MN10300_IOCLK; - break; - -#ifdef MN10300_IOBCLK - case MNSCx_CLOCK_SRC_IOBCLK: - port->ioclk = MN10300_IOBCLK; - break; -#endif - default: - BUG(); - } - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&port->uart, co, baud, parity, bits, flow); -} - -/* - * register console - */ -static int __init mn10300_serial_console_init(void) -{ - register_console(&mn10300_serial_console); - return 0; -} - -console_initcall(mn10300_serial_console_init); -#endif - -#ifdef CONFIG_CONSOLE_POLL -/* - * Polled character reception for the kernel debugger - */ -static int mn10300_serial_poll_get_char(struct uart_port *_port) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - unsigned ix; - u8 st, ch; - - _enter("%s", port->name); - - if (mn10300_serial_int_tbl[port->rx_irq].port != NULL) { - do { - /* pull chars out of the hat */ - ix = READ_ONCE(port->rx_outp); - if (CIRC_CNT(port->rx_inp, ix, MNSC_BUFFER_SIZE) == 0) - return NO_POLL_CHAR; - - /* - * READ_ONCE() enforces dependency, but dangerous - * through integer!!! - */ - ch = port->rx_buffer[ix++]; - st = port->rx_buffer[ix++]; - smp_mb(); - port->rx_outp = ix & (MNSC_BUFFER_SIZE - 1); - - } while (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF)); - } else { - do { - st = *port->_status; - if (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF)) - continue; - } while (!(st & SC01STR_RBF)); - - ch = *port->_rxb; - } - - return ch; -} - - -/* - * Polled character transmission for the kernel debugger - */ -static void mn10300_serial_poll_put_char(struct uart_port *_port, - unsigned char ch) -{ - struct mn10300_serial_port *port = - container_of(_port, struct mn10300_serial_port, uart); - u8 intr, tmp; - - /* wait for the transmitter to finish anything it might be doing (and - * this includes the virtual DMA handler, so it might take a while) */ - while (*port->_status & (SC01STR_TBF | SC01STR_TXF)) - continue; - - /* disable the Tx ready interrupt */ - intr = *port->_intr; - *port->_intr = intr & ~SC01ICR_TI; - tmp = *port->_intr; - - if (ch == 0x0a) { - *port->_txb = 0x0d; - while (*port->_status & SC01STR_TBF) - continue; - } - - *port->_txb = ch; - while (*port->_status & SC01STR_TBF) - continue; - - /* restore the Tx interrupt flag */ - *port->_intr = intr; - tmp = *port->_intr; -} - -#endif /* CONFIG_CONSOLE_POLL */ diff --git a/arch/mn10300/kernel/mn10300-serial.h b/arch/mn10300/kernel/mn10300-serial.h deleted file mode 100644 index 01791c68ea1f..000000000000 --- a/arch/mn10300/kernel/mn10300-serial.h +++ /dev/null @@ -1,130 +0,0 @@ -/* MN10300 On-chip serial port driver definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _MN10300_SERIAL_H -#define _MN10300_SERIAL_H - -#ifndef __ASSEMBLY__ -#include -#include -#endif - -#include -#include - -#define NR_PORTS 3 /* should be set 3 or 9 or 16 */ - -#define MNSC_BUFFER_SIZE +(PAGE_SIZE / 2) - -/* intr_flags bits */ -#define MNSCx_RX_AVAIL 0x01 -#define MNSCx_RX_OVERF 0x02 -#define MNSCx_TX_SPACE 0x04 -#define MNSCx_TX_EMPTY 0x08 - -/* tx_flags bits */ -#define MNSCx_TX_BREAK 0x01 -#define MNSCx_TX_STOP 0x02 - -#ifndef __ASSEMBLY__ - -struct mn10300_serial_port { - char *rx_buffer; /* reception buffer base */ - unsigned rx_inp; /* pointer to rx input offset */ - unsigned rx_outp; /* pointer to rx output offset */ - u8 tx_xchar; /* high-priority XON/XOFF buffer */ - u8 tx_flags; /* transmit break/stop request */ - u8 intr_flags; /* interrupt flags */ - volatile u16 *rx_icr; /* Rx interrupt control register */ - volatile u16 *tx_icr; /* Tx interrupt control register */ - int rx_irq; /* reception IRQ */ - int tx_irq; /* transmission IRQ */ - int tm_irq; /* timer IRQ */ - - const char *name; /* name of serial port */ - const char *rx_name; /* Rx interrupt handler name of serial port */ - const char *tx_name; /* Tx interrupt handler name of serial port */ - const char *tm_name; /* Timer interrupt handler name */ - unsigned short type; /* type of serial port */ - unsigned char isconsole; /* T if it's a console */ - volatile void *_iobase; /* pointer to base of I/O control regs */ - volatile u16 *_control; /* control register pointer */ - volatile u8 *_status; /* status register pointer */ - volatile u8 *_intr; /* interrupt register pointer */ - volatile u8 *_rxb; /* receive buffer register pointer */ - volatile u8 *_txb; /* transmit buffer register pointer */ - volatile u16 *_tmicr; /* timer interrupt control register */ - volatile u8 *_tmxmd; /* baud rate timer mode register */ - volatile u16 *_tmxbr; /* baud rate timer base register */ - - /* this must come down here so that assembly can use BSET to access the - * above fields */ - struct uart_port uart; - - unsigned short rx_brk; /* current break reception status */ - u16 tx_cts; /* current CTS status */ - int gdbstub; /* preemptively stolen by GDB stub */ - - u8 clock_src; /* clock source */ -#define MNSCx_CLOCK_SRC_IOCLK 0 -#define MNSCx_CLOCK_SRC_IOBCLK 1 - - u8 div_timer; /* timer used as divisor */ -#define MNSCx_DIV_TIMER_16BIT 0 -#define MNSCx_DIV_TIMER_8BIT 1 - - u16 options; /* options */ -#define MNSCx_OPT_CTS 0x0001 - - unsigned long ioclk; /* base clock rate */ -}; - -#ifdef CONFIG_MN10300_TTYSM0 -extern struct mn10300_serial_port mn10300_serial_port_sif0; -#endif - -#ifdef CONFIG_MN10300_TTYSM1 -extern struct mn10300_serial_port mn10300_serial_port_sif1; -#endif - -#ifdef CONFIG_MN10300_TTYSM2 -extern struct mn10300_serial_port mn10300_serial_port_sif2; -#endif - -extern struct mn10300_serial_port *mn10300_serial_ports[]; - -struct mn10300_serial_int { - struct mn10300_serial_port *port; - asmlinkage void (*vdma)(void); -}; - -extern struct mn10300_serial_int mn10300_serial_int_tbl[]; - -extern asmlinkage void mn10300_serial_vdma_interrupt(void); -extern asmlinkage void mn10300_serial_vdma_rx_handler(void); -extern asmlinkage void mn10300_serial_vdma_tx_handler(void); - -#endif /* __ASSEMBLY__ */ - -#if defined(CONFIG_GDBSTUB_ON_TTYSM0) -#define SCgSTR SC0STR -#define SCgRXB SC0RXB -#define SCgRXIRQ SC0RXIRQ -#elif defined(CONFIG_GDBSTUB_ON_TTYSM1) -#define SCgSTR SC1STR -#define SCgRXB SC1RXB -#define SCgRXIRQ SC1RXIRQ -#elif defined(CONFIG_GDBSTUB_ON_TTYSM2) -#define SCgSTR SC2STR -#define SCgRXB SC2RXB -#define SCgRXIRQ SC2RXIRQ -#endif - -#endif /* _MN10300_SERIAL_H */ diff --git a/arch/mn10300/kernel/mn10300-watchdog-low.S b/arch/mn10300/kernel/mn10300-watchdog-low.S deleted file mode 100644 index 34f8773de7d0..000000000000 --- a/arch/mn10300/kernel/mn10300-watchdog-low.S +++ /dev/null @@ -1,66 +0,0 @@ -############################################################################### -# -# MN10300 Watchdog interrupt handler -# -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#include -#include - - .text - -############################################################################### -# -# Watchdog handler entry point -# - special non-maskable interrupt -# -############################################################################### - .globl watchdog_handler - .type watchdog_handler,@function -watchdog_handler: - add -4,sp - SAVE_ALL - - mov 0xffffffff,d0 - mov d0,(REG_ORIG_D0,fp) - - mov fp,d0 - lsr 2,d1 - call watchdog_interrupt[],0 # watchdog_interrupt(regs,irq) - - jmp ret_from_intr - - .size watchdog_handler,.-watchdog_handler - -############################################################################### -# -# Watchdog touch entry point -# - kept to absolute minimum (unfortunately, it's prototyped in linux/nmi.h so -# we can't inline it) -# -############################################################################### - .globl arch_touch_nmi_watchdog - .type arch_touch_nmi_watchdog,@function -arch_touch_nmi_watchdog: - clr d0 - clr d1 - mov watchdog_alert_counter, a0 - setlb - mov d0, (a0+) - inc d1 - cmp NR_CPUS, d1 - lne - ret [],0 - - .size arch_touch_nmi_watchdog,.-arch_touch_nmi_watchdog diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c deleted file mode 100644 index 0d5641beadf5..000000000000 --- a/arch/mn10300/kernel/mn10300-watchdog.c +++ /dev/null @@ -1,205 +0,0 @@ -/* MN10300 Watchdog timer - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/i386/kernel/nmi.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static DEFINE_SPINLOCK(watchdog_print_lock); -static unsigned int watchdog; -static unsigned int watchdog_hz = 1; -unsigned int watchdog_alert_counter[NR_CPUS]; - -EXPORT_SYMBOL(arch_touch_nmi_watchdog); - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check its timer makes IRQ counts. If they are not - * changing then that CPU has some problem. - * - * since NMIs dont listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up - * here too!] - */ -static unsigned int last_irq_sums[NR_CPUS]; - -int __init check_watchdog(void) -{ - irq_cpustat_t tmp[1]; - - printk(KERN_INFO "Testing Watchdog... "); - - memcpy(tmp, irq_stat, sizeof(tmp)); - local_irq_enable(); - mdelay((10 * 1000) / watchdog_hz); /* wait 10 ticks */ - local_irq_disable(); - - if (nmi_count(0) - tmp[0].__nmi_count <= 5) { - printk(KERN_WARNING "CPU#%d: Watchdog appears to be stuck!\n", - 0); - return -1; - } - - printk(KERN_INFO "OK.\n"); - - /* now that we know it works we can reduce NMI frequency to something - * more reasonable; makes a difference in some configs - */ - watchdog_hz = 1; - - return 0; -} - -static int __init setup_watchdog(char *str) -{ - unsigned tmp; - int opt; - u8 ctr; - - get_option(&str, &opt); - if (opt != 1) - return 0; - - watchdog = opt; - if (watchdog) { - set_intr_stub(EXCEP_WDT, watchdog_handler); - ctr = WDCTR_WDCK_65536th; - WDCTR = WDCTR_WDRST | ctr; - WDCTR = ctr; - tmp = WDCTR; - - tmp = __muldiv64u(1 << (16 + ctr * 2), 1000000, MN10300_WDCLK); - tmp = 1000000000 / tmp; - watchdog_hz = (tmp + 500) / 1000; - } - - return 1; -} - -__setup("watchdog=", setup_watchdog); - -void __init watchdog_go(void) -{ - u8 wdt; - - if (watchdog) { - printk(KERN_INFO "Watchdog: running at %uHz\n", watchdog_hz); - wdt = WDCTR & ~WDCTR_WDCNE; - WDCTR = wdt | WDCTR_WDRST; - wdt = WDCTR; - WDCTR = wdt | WDCTR_WDCNE; - wdt = WDCTR; - - check_watchdog(); - } -} - -#ifdef CONFIG_SMP -static void watchdog_dump_register(void *dummy) -{ - printk(KERN_ERR "--- Register Dump (CPU%d) ---\n", CPUID); - show_registers(current_frame()); -} -#endif - -asmlinkage -void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) -{ - /* - * Since current-> is always on the stack, and we always switch - * the stack NMI-atomically, it's safe to use smp_processor_id(). - */ - int sum, cpu; - int irq = NMIIRQ; - u8 wdt, tmp; - - wdt = WDCTR & ~WDCTR_WDCNE; - WDCTR = wdt; - tmp = WDCTR; - NMICR = NMICR_WDIF; - - nmi_count(smp_processor_id())++; - kstat_incr_irq_this_cpu(irq); - - for_each_online_cpu(cpu) { - - sum = irq_stat[cpu].__irq_count; - - if ((last_irq_sums[cpu] == sum) -#if defined(CONFIG_GDBSTUB) && defined(CONFIG_SMP) - && !(CHK_GDBSTUB_BUSY() - || atomic_read(&cpu_doing_single_step)) -#endif - ) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - watchdog_alert_counter[cpu]++; - if (watchdog_alert_counter[cpu] == 5 * watchdog_hz) { - spin_lock(&watchdog_print_lock); - /* - * We are in trouble anyway, lets at least try - * to get a message out. - */ - bust_spinlocks(1); - printk(KERN_ERR - "NMI Watchdog detected LOCKUP on CPU%d," - " pc %08lx, registers:\n", - cpu, regs->pc); -#ifdef CONFIG_SMP - printk(KERN_ERR - "--- Register Dump (CPU%d) ---\n", - CPUID); -#endif - show_registers(regs); -#ifdef CONFIG_SMP - smp_nmi_call_function(watchdog_dump_register, - NULL, 1); -#endif - printk(KERN_NOTICE "console shuts up ...\n"); - console_silent(); - spin_unlock(&watchdog_print_lock); - bust_spinlocks(0); -#ifdef CONFIG_GDBSTUB - if (CHK_GDBSTUB_BUSY_AND_ACTIVE()) - gdbstub_exception(regs, excep); - else - gdbstub_intercept(regs, excep); -#endif - do_exit(SIGSEGV); - } - } else { - last_irq_sums[cpu] = sum; - watchdog_alert_counter[cpu] = 0; - } - } - - WDCTR = wdt | WDCTR_WDRST; - tmp = WDCTR; - WDCTR = wdt | WDCTR_WDCNE; - tmp = WDCTR; -} diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c deleted file mode 100644 index 66fb68d0ca8a..000000000000 --- a/arch/mn10300/kernel/mn10300_ksyms.c +++ /dev/null @@ -1,39 +0,0 @@ -/* MN10300 Miscellaneous and library kernel exports - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include - - -EXPORT_SYMBOL(empty_zero_page); - -EXPORT_SYMBOL(change_bit); -EXPORT_SYMBOL(test_and_change_bit); - -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memset); - -EXPORT_SYMBOL(strncpy_from_user); -EXPORT_SYMBOL(clear_user); -EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(strnlen_user); - -extern u64 __ashrdi3(u64, unsigned); -extern u64 __ashldi3(u64, unsigned); -extern u64 __lshrdi3(u64, unsigned); -extern s64 __negdi2(s64); -extern int __ucmpdi2(u64, u64); -EXPORT_SYMBOL(__ashrdi3); -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(__negdi2); -EXPORT_SYMBOL(__ucmpdi2); diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c deleted file mode 100644 index 216ad23c9570..000000000000 --- a/arch/mn10300/kernel/module.c +++ /dev/null @@ -1,156 +0,0 @@ -/* MN10300 Kernel module helper routines - * - * Copyright (C) 2007, 2008, 2009 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * - Derived from arch/i386/kernel/module.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public Licence as published by - * the Free Software Foundation; either version 2 of the Licence, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public Licence for more details. - * - * You should have received a copy of the GNU General Public Licence - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include - -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt, ...) -#endif - -static void reloc_put16(uint8_t *p, uint32_t val) -{ - p[0] = val & 0xff; - p[1] = (val >> 8) & 0xff; -} - -static void reloc_put24(uint8_t *p, uint32_t val) -{ - reloc_put16(p, val); - p[2] = (val >> 16) & 0xff; -} - -static void reloc_put32(uint8_t *p, uint32_t val) -{ - reloc_put16(p, val); - reloc_put16(p+2, val >> 16); -} - -/* - * apply a RELA relocation - */ -int apply_relocate_add(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i, sym_diff_seen = 0; - Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - Elf32_Addr relocation, sym_diff_val = 0; - uint8_t *location; - uint32_t value; - - DEBUGP("Applying relocate section %u to %u\n", - relsec, sechdrs[relsec].sh_info); - - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* this is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - - /* this is the symbol the relocation is referring to (note that - * all undefined symbols have been resolved by the caller) */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rel[i].r_info); - - /* this is the adjustment to be made */ - relocation = sym->st_value + rel[i].r_addend; - - if (sym_diff_seen) { - switch (ELF32_R_TYPE(rel[i].r_info)) { - case R_MN10300_32: - case R_MN10300_24: - case R_MN10300_16: - case R_MN10300_8: - relocation -= sym_diff_val; - sym_diff_seen = 0; - break; - default: - printk(KERN_ERR "module %s: Unexpected SYM_DIFF relocation: %u\n", - me->name, ELF32_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - - switch (ELF32_R_TYPE(rel[i].r_info)) { - /* for the first four relocation types, we simply - * store the adjustment at the location given */ - case R_MN10300_32: - reloc_put32(location, relocation); - break; - case R_MN10300_24: - reloc_put24(location, relocation); - break; - case R_MN10300_16: - reloc_put16(location, relocation); - break; - case R_MN10300_8: - *location = relocation; - break; - - /* for the next three relocation types, we write the - * adjustment with the address subtracted over the - * value at the location given */ - case R_MN10300_PCREL32: - value = relocation - (uint32_t) location; - reloc_put32(location, value); - break; - case R_MN10300_PCREL16: - value = relocation - (uint32_t) location; - reloc_put16(location, value); - break; - case R_MN10300_PCREL8: - *location = relocation - (uint32_t) location; - break; - - case R_MN10300_SYM_DIFF: - /* This is used to adjust the next reloc as required - * by relaxation. */ - sym_diff_seen = 1; - sym_diff_val = sym->st_value; - break; - - case R_MN10300_ALIGN: - /* Just ignore the ALIGN relocs. - * Only interesting if kernel performed relaxation. */ - continue; - - default: - printk(KERN_ERR "module %s: Unknown relocation: %u\n", - me->name, ELF32_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - if (sym_diff_seen) { - printk(KERN_ERR "module %s: Nothing follows SYM_DIFF relocation: %u\n", - me->name, ELF32_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - return 0; -} diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c deleted file mode 100644 index 7c475fd99c46..000000000000 --- a/arch/mn10300/kernel/process.c +++ /dev/null @@ -1,175 +0,0 @@ -/* MN10300 Process handling code - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "internal.h" - -/* - * power off function, if any - */ -void (*pm_power_off)(void); -EXPORT_SYMBOL(pm_power_off); - -/* - * On SMP it's slightly faster (but much more power-consuming!) - * to poll the ->work.need_resched flag instead of waiting for the - * cross-CPU IPI to arrive. Use this option with caution. - * - * tglx: No idea why this depends on HOTPLUG_CPU !?! - */ -#if !defined(CONFIG_SMP) || defined(CONFIG_HOTPLUG_CPU) -void arch_cpu_idle(void) -{ - safe_halt(); -} -#endif - -void machine_restart(char *cmd) -{ -#ifdef CONFIG_KERNEL_DEBUGGER - gdbstub_exit(0); -#endif - -#ifdef mn10300_unit_hard_reset - mn10300_unit_hard_reset(); -#else - mn10300_proc_hard_reset(); -#endif -} - -void machine_halt(void) -{ -#ifdef CONFIG_KERNEL_DEBUGGER - gdbstub_exit(0); -#endif -} - -void machine_power_off(void) -{ -#ifdef CONFIG_KERNEL_DEBUGGER - gdbstub_exit(0); -#endif -} - -void show_regs(struct pt_regs *regs) -{ - show_regs_print_info(KERN_DEFAULT); -} - -/* - * free current thread data structures etc.. - */ -void exit_thread(struct task_struct *tsk) -{ - exit_fpu(tsk); -} - -void flush_thread(void) -{ - flush_fpu(); -} - -void release_thread(struct task_struct *dead_task) -{ -} - -/* - * this gets called so that we can store lazy state into memory and copy the - * current task into the new thread. - */ -int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) -{ - unlazy_fpu(src); - *dst = *src; - return 0; -} - -/* - * set up the kernel stack for a new thread and copy arch-specific thread - * control information - */ -int copy_thread(unsigned long clone_flags, - unsigned long c_usp, unsigned long ustk_size, - struct task_struct *p) -{ - struct thread_info *ti = task_thread_info(p); - struct pt_regs *c_regs; - unsigned long c_ksp; - - c_ksp = (unsigned long) task_stack_page(p) + THREAD_SIZE; - - /* allocate the userspace exception frame and set it up */ - c_ksp -= sizeof(struct pt_regs); - c_regs = (struct pt_regs *) c_ksp; - c_ksp -= 12; /* allocate function call ABI slack */ - - /* set up things up so the scheduler can start the new task */ - p->thread.uregs = c_regs; - ti->frame = c_regs; - p->thread.a3 = (unsigned long) c_regs; - p->thread.sp = c_ksp; - p->thread.wchan = p->thread.pc; - p->thread.usp = c_usp; - - if (unlikely(p->flags & PF_KTHREAD)) { - memset(c_regs, 0, sizeof(struct pt_regs)); - c_regs->a0 = c_usp; /* function */ - c_regs->d0 = ustk_size; /* argument */ - local_save_flags(c_regs->epsw); - c_regs->epsw |= EPSW_IE | EPSW_IM_7; - p->thread.pc = (unsigned long) ret_from_kernel_thread; - return 0; - } - *c_regs = *current_pt_regs(); - if (c_usp) - c_regs->sp = c_usp; - c_regs->epsw &= ~EPSW_FE; /* my FPU */ - - /* the new TLS pointer is passed in as arg #5 to sys_clone() */ - if (clone_flags & CLONE_SETTLS) - c_regs->e2 = current_frame()->d3; - - p->thread.pc = (unsigned long) ret_from_fork; - - return 0; -} - -unsigned long get_wchan(struct task_struct *p) -{ - return p->thread.wchan; -} diff --git a/arch/mn10300/kernel/profile-low.S b/arch/mn10300/kernel/profile-low.S deleted file mode 100644 index 94ffac12d02d..000000000000 --- a/arch/mn10300/kernel/profile-low.S +++ /dev/null @@ -1,72 +0,0 @@ -############################################################################### -# -# Fast profiling interrupt handler -# -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#include -#include - -#define pi break - - .balign 4 -counter: - .long -1 - -############################################################################### -# -# Profiling interrupt entry point -# - intended to run at interrupt priority 1 -# -############################################################################### -ENTRY(profile_handler) - movm [d2,d3,a2],(sp) - - # ignore userspace - mov (12,sp),d2 - and EPSW_nSL,d2 - bne out - - # do nothing if there's no buffer - mov (prof_buffer),a2 - and a2,a2 - beq out - or 0x20000000,a2 - - # calculate relative position in text segment - mov (16,sp),d2 - sub _stext,d2 - mov (prof_shift),d3 - lsr d3,d2 - mov (prof_len),d3 - cmp d3,d2 - bcc outside_text - - # increment the appropriate profile bucket -do_inc: - asl2 d2 - mov (a2,d2),d3 - inc d3 - mov d3,(a2,d2) -out: - mov GxICR_DETECT,d2 - movbu d2,(TM11ICR) # ACK the interrupt - movbu (TM11ICR),d2 - movm (sp),[d2,d3,a2] - rti - -outside_text: - sub 1,d3 - mov d3,d2 - bra do_inc diff --git a/arch/mn10300/kernel/profile.c b/arch/mn10300/kernel/profile.c deleted file mode 100644 index 4f342f75d00c..000000000000 --- a/arch/mn10300/kernel/profile.c +++ /dev/null @@ -1,51 +0,0 @@ -/* MN10300 Profiling setup - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -/* - * initialise the profiling if enabled - * - using with gdbstub will give anomalous results - * - can't be used with gdbstub if running at IRQ priority 0 - */ -static __init int profile_init(void) -{ - u16 tmp; - - if (!prof_buffer) - return 0; - - /* use timer 11 to drive the profiling interrupts */ - set_intr_stub(EXCEP_IRQ_LEVEL0, profile_handler); - - /* set IRQ priority at which to run */ - set_intr_level(TM11IRQ, GxICR_LEVEL_0); - - /* set up timer 11 - * - source: (IOCLK 33MHz)*2 = 66MHz - * - frequency: (33330000*2) / 8 / 20625 = 202Hz - */ - TM11BR = 20625 - 1; - TM11MD = TM8MD_SRC_IOCLK_8; - TM11MD |= TM8MD_INIT_COUNTER; - TM11MD &= ~TM8MD_INIT_COUNTER; - TM11MD |= TM8MD_COUNT_ENABLE; - - TM11ICR |= GxICR_ENABLE; - tmp = TM11ICR; - - printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n", - MN10300_IOCLK / 8 / (TM11BR + 1)); - printk(KERN_INFO "Profile histogram stored %p-%p\n", - prof_buffer, (u8 *)(prof_buffer + prof_len) - 1); - - return 0; -} - -__initcall(profile_init); diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c deleted file mode 100644 index 8009876a7ac4..000000000000 --- a/arch/mn10300/kernel/ptrace.c +++ /dev/null @@ -1,386 +0,0 @@ -/* MN10300 Process tracing - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * translate ptrace register IDs into struct pt_regs offsets - */ -static const u8 ptrace_regid_to_frame[] = { - [PT_A3 << 2] = REG_A3, - [PT_A2 << 2] = REG_A2, - [PT_D3 << 2] = REG_D3, - [PT_D2 << 2] = REG_D2, - [PT_MCVF << 2] = REG_MCVF, - [PT_MCRL << 2] = REG_MCRL, - [PT_MCRH << 2] = REG_MCRH, - [PT_MDRQ << 2] = REG_MDRQ, - [PT_E1 << 2] = REG_E1, - [PT_E0 << 2] = REG_E0, - [PT_E7 << 2] = REG_E7, - [PT_E6 << 2] = REG_E6, - [PT_E5 << 2] = REG_E5, - [PT_E4 << 2] = REG_E4, - [PT_E3 << 2] = REG_E3, - [PT_E2 << 2] = REG_E2, - [PT_SP << 2] = REG_SP, - [PT_LAR << 2] = REG_LAR, - [PT_LIR << 2] = REG_LIR, - [PT_MDR << 2] = REG_MDR, - [PT_A1 << 2] = REG_A1, - [PT_A0 << 2] = REG_A0, - [PT_D1 << 2] = REG_D1, - [PT_D0 << 2] = REG_D0, - [PT_ORIG_D0 << 2] = REG_ORIG_D0, - [PT_EPSW << 2] = REG_EPSW, - [PT_PC << 2] = REG_PC, -}; - -static inline int get_stack_long(struct task_struct *task, int offset) -{ - return *(unsigned long *) - ((unsigned long) task->thread.uregs + offset); -} - -static inline -int put_stack_long(struct task_struct *task, int offset, unsigned long data) -{ - unsigned long stack; - - stack = (unsigned long) task->thread.uregs + offset; - *(unsigned long *) stack = data; - return 0; -} - -/* - * retrieve the contents of MN10300 userspace general registers - */ -static int genregs_get(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) -{ - const struct pt_regs *regs = task_pt_regs(target); - int ret; - - /* we need to skip regs->next */ - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - regs, 0, PT_ORIG_D0 * sizeof(long)); - if (ret < 0) - return ret; - - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - ®s->orig_d0, PT_ORIG_D0 * sizeof(long), - NR_PTREGS * sizeof(long)); - if (ret < 0) - return ret; - - return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, - NR_PTREGS * sizeof(long), -1); -} - -/* - * update the contents of the MN10300 userspace general registers - */ -static int genregs_set(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - const void *kbuf, const void __user *ubuf) -{ - struct pt_regs *regs = task_pt_regs(target); - unsigned long tmp; - int ret; - - /* we need to skip regs->next */ - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - regs, 0, PT_ORIG_D0 * sizeof(long)); - if (ret < 0) - return ret; - - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - ®s->orig_d0, PT_ORIG_D0 * sizeof(long), - PT_EPSW * sizeof(long)); - if (ret < 0) - return ret; - - /* we need to mask off changes to EPSW */ - tmp = regs->epsw; - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - &tmp, PT_EPSW * sizeof(long), - PT_PC * sizeof(long)); - tmp &= EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N | EPSW_FLAG_Z; - tmp |= regs->epsw & ~(EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N | - EPSW_FLAG_Z); - regs->epsw = tmp; - - if (ret < 0) - return ret; - - /* and finally load the PC */ - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - ®s->pc, PT_PC * sizeof(long), - NR_PTREGS * sizeof(long)); - - if (ret < 0) - return ret; - - return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, - NR_PTREGS * sizeof(long), -1); -} - -/* - * retrieve the contents of MN10300 userspace FPU registers - */ -static int fpuregs_get(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) -{ - const struct fpu_state_struct *fpregs = &target->thread.fpu_state; - int ret; - - unlazy_fpu(target); - - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - fpregs, 0, sizeof(*fpregs)); - if (ret < 0) - return ret; - - return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, - sizeof(*fpregs), -1); -} - -/* - * update the contents of the MN10300 userspace FPU registers - */ -static int fpuregs_set(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - const void *kbuf, const void __user *ubuf) -{ - struct fpu_state_struct fpu_state = target->thread.fpu_state; - int ret; - - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - &fpu_state, 0, sizeof(fpu_state)); - if (ret < 0) - return ret; - - fpu_kill_state(target); - target->thread.fpu_state = fpu_state; - set_using_fpu(target); - - return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, - sizeof(fpu_state), -1); -} - -/* - * determine if the FPU registers have actually been used - */ -static int fpuregs_active(struct task_struct *target, - const struct user_regset *regset) -{ - return is_using_fpu(target) ? regset->n : 0; -} - -/* - * Define the register sets available on the MN10300 under Linux - */ -enum mn10300_regset { - REGSET_GENERAL, - REGSET_FPU, -}; - -static const struct user_regset mn10300_regsets[] = { - /* - * General register format is: - * A3, A2, D3, D2, MCVF, MCRL, MCRH, MDRQ - * E1, E0, E7...E2, SP, LAR, LIR, MDR - * A1, A0, D1, D0, ORIG_D0, EPSW, PC - */ - [REGSET_GENERAL] = { - .core_note_type = NT_PRSTATUS, - .n = ELF_NGREG, - .size = sizeof(long), - .align = sizeof(long), - .get = genregs_get, - .set = genregs_set, - }, - /* - * FPU register format is: - * FS0-31, FPCR - */ - [REGSET_FPU] = { - .core_note_type = NT_PRFPREG, - .n = sizeof(struct fpu_state_struct) / sizeof(long), - .size = sizeof(long), - .align = sizeof(long), - .get = fpuregs_get, - .set = fpuregs_set, - .active = fpuregs_active, - }, -}; - -static const struct user_regset_view user_mn10300_native_view = { - .name = "mn10300", - .e_machine = EM_MN10300, - .regsets = mn10300_regsets, - .n = ARRAY_SIZE(mn10300_regsets), -}; - -const struct user_regset_view *task_user_regset_view(struct task_struct *task) -{ - return &user_mn10300_native_view; -} - -/* - * set the single-step bit - */ -void user_enable_single_step(struct task_struct *child) -{ -#ifndef CONFIG_MN10300_USING_JTAG - struct user *dummy = NULL; - long tmp; - - tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw); - tmp |= EPSW_T; - put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp); -#endif -} - -/* - * make sure the single-step bit is not set - */ -void user_disable_single_step(struct task_struct *child) -{ -#ifndef CONFIG_MN10300_USING_JTAG - struct user *dummy = NULL; - long tmp; - - tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw); - tmp &= ~EPSW_T; - put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp); -#endif -} - -void ptrace_disable(struct task_struct *child) -{ - user_disable_single_step(child); -} - -/* - * handle the arch-specific side of process tracing - */ -long arch_ptrace(struct task_struct *child, long request, - unsigned long addr, unsigned long data) -{ - unsigned long tmp; - int ret; - unsigned long __user *datap = (unsigned long __user *) data; - - switch (request) { - /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: - ret = -EIO; - if ((addr & 3) || addr > sizeof(struct user) - 3) - break; - - tmp = 0; /* Default return condition */ - if (addr < NR_PTREGS << 2) - tmp = get_stack_long(child, - ptrace_regid_to_frame[addr]); - ret = put_user(tmp, datap); - break; - - /* write the word at location addr in the USER area */ - case PTRACE_POKEUSR: - ret = -EIO; - if ((addr & 3) || addr > sizeof(struct user) - 3) - break; - - ret = 0; - if (addr < NR_PTREGS << 2) - ret = put_stack_long(child, ptrace_regid_to_frame[addr], - data); - break; - - case PTRACE_GETREGS: /* Get all integer regs from the child. */ - return copy_regset_to_user(child, &user_mn10300_native_view, - REGSET_GENERAL, - 0, NR_PTREGS * sizeof(long), - datap); - - case PTRACE_SETREGS: /* Set all integer regs in the child. */ - return copy_regset_from_user(child, &user_mn10300_native_view, - REGSET_GENERAL, - 0, NR_PTREGS * sizeof(long), - datap); - - case PTRACE_GETFPREGS: /* Get the child FPU state. */ - return copy_regset_to_user(child, &user_mn10300_native_view, - REGSET_FPU, - 0, sizeof(struct fpu_state_struct), - datap); - - case PTRACE_SETFPREGS: /* Set the child FPU state. */ - return copy_regset_from_user(child, &user_mn10300_native_view, - REGSET_FPU, - 0, sizeof(struct fpu_state_struct), - datap); - - default: - ret = ptrace_request(child, request, addr, data); - break; - } - - return ret; -} - -/* - * handle tracing of system call entry - * - return the revised system call number or ULONG_MAX to cause ENOSYS - */ -asmlinkage unsigned long syscall_trace_entry(struct pt_regs *regs) -{ - if (tracehook_report_syscall_entry(regs)) - /* tracing decided this syscall should not happen, so - * We'll return a bogus call number to get an ENOSYS - * error, but leave the original number in - * regs->orig_d0 - */ - return ULONG_MAX; - - return regs->orig_d0; -} - -/* - * handle tracing of system call exit - */ -asmlinkage void syscall_trace_exit(struct pt_regs *regs) -{ - tracehook_report_syscall_exit(regs, 0); -} diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c deleted file mode 100644 index f81f37025072..000000000000 --- a/arch/mn10300/kernel/rtc.c +++ /dev/null @@ -1,46 +0,0 @@ -/* MN10300 RTC management - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include - -#include -#include - -DEFINE_SPINLOCK(rtc_lock); -EXPORT_SYMBOL(rtc_lock); - -static const __initdata struct resource res[] = { - DEFINE_RES_IO(RTC_PORT(0), RTC_IO_EXTENT), - DEFINE_RES_IRQ(RTC_IRQ), -}; - -/* - * calibrate the TSC clock against the RTC - */ -void __init calibrate_clock(void) -{ - unsigned char status; - - /* make sure the RTC is running and is set to operate in 24hr mode */ - status = RTSRC; - RTCRB |= RTCRB_SET; - RTCRB |= RTCRB_TM_24HR; - RTCRB &= ~RTCRB_DM_BINARY; - RTCRA |= RTCRA_DVR; - RTCRA &= ~RTCRA_DVR; - RTCRB &= ~RTCRB_SET; - - platform_device_register_simple("rtc_cmos", -1, res, ARRAY_SIZE(res)); -} diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c deleted file mode 100644 index 1b3d80d8a171..000000000000 --- a/arch/mn10300/kernel/setup.c +++ /dev/null @@ -1,283 +0,0 @@ -/* MN10300 Arch-specific initialisation - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct mn10300_cpuinfo boot_cpu_data; - -static char __initdata cmd_line[COMMAND_LINE_SIZE]; -char redboot_command_line[COMMAND_LINE_SIZE] = - "console=ttyS0,115200 root=/dev/mtdblock3 rw"; - -char __initdata redboot_platform_name[COMMAND_LINE_SIZE]; - -static struct resource code_resource = { - .start = 0x100000, - .end = 0, - .name = "Kernel code", -}; - -static struct resource data_resource = { - .start = 0, - .end = 0, - .name = "Kernel data", -}; - -static unsigned long __initdata phys_memory_base; -static unsigned long __initdata phys_memory_end; -static unsigned long __initdata memory_end; -unsigned long memory_size; - -struct thread_info *__current_ti = &init_thread_union.thread_info; -struct task_struct *__current = &init_task; - -#define mn10300_known_cpus 5 -static const char *const mn10300_cputypes[] = { - "am33-1", - "am33-2", - "am34-1", - "am33-3", - "am34-2", - "unknown" -}; - -/* - * Pick out the memory size. We look for mem=size, - * where size is "size[KkMm]" - */ -static int __init early_mem(char *p) -{ - memory_size = memparse(p, &p); - - if (memory_size == 0) - panic("Memory size not known\n"); - - return 0; -} -early_param("mem", early_mem); - -/* - * architecture specific setup - */ -void __init setup_arch(char **cmdline_p) -{ - unsigned long bootmap_size; - unsigned long kstart_pfn, start_pfn, free_pfn, end_pfn; - - cpu_init(); - unit_setup(); - smp_init_cpus(); - - /* save unparsed command line copy for /proc/cmdline */ - strlcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE); - - /* populate cmd_line too for later use, preserving boot_command_line */ - strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); - *cmdline_p = cmd_line; - - parse_early_param(); - - memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS + - memory_size; - if (memory_end > phys_memory_end) - memory_end = phys_memory_end; - - init_mm.start_code = (unsigned long)&_text; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; - init_mm.brk = (unsigned long) &_end; - - code_resource.start = virt_to_bus(&_text); - code_resource.end = virt_to_bus(&_etext)-1; - data_resource.start = virt_to_bus(&_etext); - data_resource.end = virt_to_bus(&_edata)-1; - - start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT); - kstart_pfn = PFN_UP(__pa(&_text)); - free_pfn = PFN_UP(__pa(&_end)); - end_pfn = PFN_DOWN(__pa(memory_end)); - - bootmap_size = init_bootmem_node(&contig_page_data, - free_pfn, - start_pfn, - end_pfn); - - if (kstart_pfn > start_pfn) - free_bootmem(PFN_PHYS(start_pfn), - PFN_PHYS(kstart_pfn - start_pfn)); - - free_bootmem(PFN_PHYS(free_pfn), - PFN_PHYS(end_pfn - free_pfn)); - - /* If interrupt vector table is in main ram, then we need to - reserve the page it is occupying. */ - if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS && - CONFIG_INTERRUPT_VECTOR_BASE < memory_end) - reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, PAGE_SIZE, - BOOTMEM_DEFAULT); - - reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size, - BOOTMEM_DEFAULT); - -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif - - paging_init(); -} - -/* - * perform CPU initialisation - */ -void __init cpu_init(void) -{ - unsigned long cpurev = CPUREV, type; - - type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S; - if (type > mn10300_known_cpus) - type = mn10300_known_cpus; - - printk(KERN_INFO "Panasonic %s, rev %ld\n", - mn10300_cputypes[type], - (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S); - - get_mem_info(&phys_memory_base, &memory_size); - phys_memory_end = phys_memory_base + memory_size; - - fpu_init_state(); -} - -static struct cpu cpu_devices[NR_CPUS]; - -static int __init topology_init(void) -{ - int i; - - for_each_present_cpu(i) - register_cpu(&cpu_devices[i], i); - - return 0; -} - -subsys_initcall(topology_init); - -/* - * Get CPU information for use by the procfs. - */ -static int show_cpuinfo(struct seq_file *m, void *v) -{ -#ifdef CONFIG_SMP - struct mn10300_cpuinfo *c = v; - unsigned long cpu_id = c - cpu_data; - unsigned long cpurev = c->type, type, icachesz, dcachesz; -#else /* CONFIG_SMP */ - unsigned long cpu_id = 0; - unsigned long cpurev = CPUREV, type, icachesz, dcachesz; -#endif /* CONFIG_SMP */ - -#ifdef CONFIG_SMP - if (!cpu_online(cpu_id)) - return 0; -#endif - - type = (cpurev & CPUREV_TYPE) >> CPUREV_TYPE_S; - if (type > mn10300_known_cpus) - type = mn10300_known_cpus; - - icachesz = - ((cpurev & CPUREV_ICWAY ) >> CPUREV_ICWAY_S) * - ((cpurev & CPUREV_ICSIZE) >> CPUREV_ICSIZE_S) * - 1024; - - dcachesz = - ((cpurev & CPUREV_DCWAY ) >> CPUREV_DCWAY_S) * - ((cpurev & CPUREV_DCSIZE) >> CPUREV_DCSIZE_S) * - 1024; - - seq_printf(m, - "processor : %ld\n" - "vendor_id : " PROCESSOR_VENDOR_NAME "\n" - "cpu core : %s\n" - "cpu rev : %lu\n" - "model name : " PROCESSOR_MODEL_NAME "\n" - "icache size: %lu\n" - "dcache size: %lu\n", - cpu_id, - mn10300_cputypes[type], - (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S, - icachesz, - dcachesz - ); - - seq_printf(m, - "ioclk speed: %lu.%02luMHz\n" - "bogomips : %lu.%02lu\n\n", - MN10300_IOCLK / 1000000, - (MN10300_IOCLK / 10000) % 100, -#ifdef CONFIG_SMP - c->loops_per_jiffy / (500000 / HZ), - (c->loops_per_jiffy / (5000 / HZ)) % 100 -#else /* CONFIG_SMP */ - loops_per_jiffy / (500000 / HZ), - (loops_per_jiffy / (5000 / HZ)) % 100 -#endif /* CONFIG_SMP */ - ); - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos < NR_CPUS ? cpu_data + *pos : NULL; -} - -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} - -static void c_stop(struct seq_file *m, void *v) -{ -} - -const struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; diff --git a/arch/mn10300/kernel/sigframe.h b/arch/mn10300/kernel/sigframe.h deleted file mode 100644 index 0decba28ae84..000000000000 --- a/arch/mn10300/kernel/sigframe.h +++ /dev/null @@ -1,33 +0,0 @@ -/* MN10300 Signal frame definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -struct sigframe -{ - void (*pretcode)(void); - int sig; - struct sigcontext *psc; - struct sigcontext sc; - struct fpucontext fpuctx; - unsigned long extramask[_NSIG_WORDS-1]; - char retcode[8]; -}; - -struct rt_sigframe -{ - void (*pretcode)(void); - int sig; - struct siginfo *pinfo; - void *puc; - struct siginfo info; - struct ucontext uc; - struct fpucontext fpuctx; - char retcode[8]; -}; diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c deleted file mode 100644 index 2f3cb5734235..000000000000 --- a/arch/mn10300/kernel/signal.c +++ /dev/null @@ -1,431 +0,0 @@ -/* MN10300 Signal handling - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "sigframe.h" - -#define DEBUG_SIG 0 - -/* - * do a signal return; undo the signal stack. - */ -static int restore_sigcontext(struct pt_regs *regs, - struct sigcontext __user *sc, long *_d0) -{ - unsigned int err = 0; - - /* Always make any pending restarted system calls return -EINTR */ - current->restart_block.fn = do_no_restart_syscall; - - if (is_using_fpu(current)) - fpu_kill_state(current); - -#define COPY(x) err |= __get_user(regs->x, &sc->x) - COPY(d1); COPY(d2); COPY(d3); - COPY(a0); COPY(a1); COPY(a2); COPY(a3); - COPY(e0); COPY(e1); COPY(e2); COPY(e3); - COPY(e4); COPY(e5); COPY(e6); COPY(e7); - COPY(lar); COPY(lir); - COPY(mdr); COPY(mdrq); - COPY(mcvf); COPY(mcrl); COPY(mcrh); - COPY(sp); COPY(pc); -#undef COPY - - { - unsigned int tmpflags; -#ifndef CONFIG_MN10300_USING_JTAG -#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \ - EPSW_T | EPSW_nAR) -#else -#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \ - EPSW_nAR) -#endif - err |= __get_user(tmpflags, &sc->epsw); - regs->epsw = (regs->epsw & ~USER_EPSW) | - (tmpflags & USER_EPSW); - regs->orig_d0 = -1; /* disable syscall checks */ - } - - { - struct fpucontext *buf; - err |= __get_user(buf, &sc->fpucontext); - if (buf) { - if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) - goto badframe; - err |= fpu_restore_sigcontext(buf); - } - } - - err |= __get_user(*_d0, &sc->d0); - return err; - -badframe: - return 1; -} - -/* - * standard signal return syscall - */ -asmlinkage long sys_sigreturn(void) -{ - struct sigframe __user *frame; - sigset_t set; - long d0; - - frame = (struct sigframe __user *) current_frame()->sp; - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - if (__get_user(set.sig[0], &frame->sc.oldmask)) - goto badframe; - - if (_NSIG_WORDS > 1 && - __copy_from_user(&set.sig[1], &frame->extramask, - sizeof(frame->extramask))) - goto badframe; - - set_current_blocked(&set); - - if (restore_sigcontext(current_frame(), &frame->sc, &d0)) - goto badframe; - - return d0; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -/* - * realtime signal return syscall - */ -asmlinkage long sys_rt_sigreturn(void) -{ - struct rt_sigframe __user *frame; - sigset_t set; - long d0; - - frame = (struct rt_sigframe __user *) current_frame()->sp; - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) - goto badframe; - - set_current_blocked(&set); - - if (restore_sigcontext(current_frame(), &frame->uc.uc_mcontext, &d0)) - goto badframe; - - if (restore_altstack(&frame->uc.uc_stack)) - goto badframe; - - return d0; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -/* - * store the userspace context into a signal frame - */ -static int setup_sigcontext(struct sigcontext __user *sc, - struct fpucontext *fpuctx, - struct pt_regs *regs, - unsigned long mask) -{ - int tmp, err = 0; - -#define COPY(x) err |= __put_user(regs->x, &sc->x) - COPY(d0); COPY(d1); COPY(d2); COPY(d3); - COPY(a0); COPY(a1); COPY(a2); COPY(a3); - COPY(e0); COPY(e1); COPY(e2); COPY(e3); - COPY(e4); COPY(e5); COPY(e6); COPY(e7); - COPY(lar); COPY(lir); - COPY(mdr); COPY(mdrq); - COPY(mcvf); COPY(mcrl); COPY(mcrh); - COPY(sp); COPY(epsw); COPY(pc); -#undef COPY - - tmp = fpu_setup_sigcontext(fpuctx); - if (tmp < 0) - err = 1; - else - err |= __put_user(tmp ? fpuctx : NULL, &sc->fpucontext); - - /* non-iBCS2 extensions.. */ - err |= __put_user(mask, &sc->oldmask); - - return err; -} - -/* - * determine which stack to use.. - */ -static inline void __user *get_sigframe(struct ksignal *ksig, - struct pt_regs *regs, - size_t frame_size) -{ - unsigned long sp = sigsp(regs->sp, ksig); - - return (void __user *) ((sp - frame_size) & ~7UL); -} - -/* - * set up a normal signal frame - */ -static int setup_frame(struct ksignal *ksig, sigset_t *set, - struct pt_regs *regs) -{ - struct sigframe __user *frame; - int sig = ksig->sig; - - frame = get_sigframe(ksig, regs, sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - return -EFAULT; - - if (__put_user(sig, &frame->sig) < 0 || - __put_user(&frame->sc, &frame->psc) < 0) - return -EFAULT; - - if (setup_sigcontext(&frame->sc, &frame->fpuctx, regs, set->sig[0])) - return -EFAULT; - - if (_NSIG_WORDS > 1) { - if (__copy_to_user(frame->extramask, &set->sig[1], - sizeof(frame->extramask))) - return -EFAULT; - } - - /* set up to return from userspace. If provided, use a stub already in - * userspace */ - if (ksig->ka.sa.sa_flags & SA_RESTORER) { - if (__put_user(ksig->ka.sa.sa_restorer, &frame->pretcode)) - return -EFAULT; - } else { - if (__put_user((void (*)(void))frame->retcode, - &frame->pretcode)) - return -EFAULT; - /* this is mov $,d0; syscall 0 */ - if (__put_user(0x2c, (char *)(frame->retcode + 0)) || - __put_user(__NR_sigreturn, (char *)(frame->retcode + 1)) || - __put_user(0x00, (char *)(frame->retcode + 2)) || - __put_user(0xf0, (char *)(frame->retcode + 3)) || - __put_user(0xe0, (char *)(frame->retcode + 4))) - return -EFAULT; - flush_icache_range((unsigned long) frame->retcode, - (unsigned long) frame->retcode + 5); - } - - /* set up registers for signal handler */ - regs->sp = (unsigned long) frame; - regs->pc = (unsigned long) ksig->ka.sa.sa_handler; - regs->d0 = sig; - regs->d1 = (unsigned long) &frame->sc; - -#if DEBUG_SIG - printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n", - sig, current->comm, current->pid, frame, regs->pc, - frame->pretcode); -#endif - - return 0; -} - -/* - * set up a realtime signal frame - */ -static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, - struct pt_regs *regs) -{ - struct rt_sigframe __user *frame; - int sig = ksig->sig; - - frame = get_sigframe(ksig, regs, sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - return -EFAULT; - - if (__put_user(sig, &frame->sig) || - __put_user(&frame->info, &frame->pinfo) || - __put_user(&frame->uc, &frame->puc) || - copy_siginfo_to_user(&frame->info, &ksig->info)) - return -EFAULT; - - /* create the ucontext. */ - if (__put_user(0, &frame->uc.uc_flags) || - __put_user(0, &frame->uc.uc_link) || - __save_altstack(&frame->uc.uc_stack, regs->sp) || - setup_sigcontext(&frame->uc.uc_mcontext, - &frame->fpuctx, regs, set->sig[0]) || - __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set))) - return -EFAULT; - - /* set up to return from userspace. If provided, use a stub already in - * userspace */ - if (ksig->ka.sa.sa_flags & SA_RESTORER) { - if (__put_user(ksig->ka.sa.sa_restorer, &frame->pretcode)) - return -EFAULT; - - } else { - if (__put_user((void(*)(void))frame->retcode, - &frame->pretcode) || - /* This is mov $,d0; syscall 0 */ - __put_user(0x2c, (char *)(frame->retcode + 0)) || - __put_user(__NR_rt_sigreturn, - (char *)(frame->retcode + 1)) || - __put_user(0x00, (char *)(frame->retcode + 2)) || - __put_user(0xf0, (char *)(frame->retcode + 3)) || - __put_user(0xe0, (char *)(frame->retcode + 4))) - return -EFAULT; - - flush_icache_range((u_long) frame->retcode, - (u_long) frame->retcode + 5); - } - - /* Set up registers for signal handler */ - regs->sp = (unsigned long) frame; - regs->pc = (unsigned long) ksig->ka.sa.sa_handler; - regs->d0 = sig; - regs->d1 = (long) &frame->info; - -#if DEBUG_SIG - printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n", - sig, current->comm, current->pid, frame, regs->pc, - frame->pretcode); -#endif - - return 0; -} - -static inline void stepback(struct pt_regs *regs) -{ - regs->pc -= 2; - regs->orig_d0 = -1; -} - -/* - * handle the actual delivery of a signal to userspace - */ -static int handle_signal(struct ksignal *ksig, struct pt_regs *regs) -{ - sigset_t *oldset = sigmask_to_save(); - int ret; - - /* Are we from a system call? */ - if (regs->orig_d0 >= 0) { - /* If so, check system call restarting.. */ - switch (regs->d0) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->d0 = -EINTR; - break; - - case -ERESTARTSYS: - if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { - regs->d0 = -EINTR; - break; - } - - /* fallthrough */ - case -ERESTARTNOINTR: - regs->d0 = regs->orig_d0; - stepback(regs); - } - } - - /* Set up the stack frame */ - if (ksig->ka.sa.sa_flags & SA_SIGINFO) - ret = setup_rt_frame(ksig, oldset, regs); - else - ret = setup_frame(ksig, oldset, regs); - - signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); - return 0; -} - -/* - * handle a potential signal - */ -static void do_signal(struct pt_regs *regs) -{ - struct ksignal ksig; - - if (get_signal(&ksig)) { - handle_signal(&ksig, regs); - return; - } - - /* did we come from a system call? */ - if (regs->orig_d0 >= 0) { - /* restart the system call - no handlers present */ - switch (regs->d0) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - regs->d0 = regs->orig_d0; - stepback(regs); - break; - - case -ERESTART_RESTARTBLOCK: - regs->d0 = __NR_restart_syscall; - stepback(regs); - break; - } - } - - /* if there's no signal to deliver, we just put the saved sigmask - * back */ - restore_saved_sigmask(); -} - -/* - * notification of userspace execution resumption - * - triggered by current->work.notify_resume - */ -asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags) -{ - /* Pending single-step? */ - if (thread_info_flags & _TIF_SINGLESTEP) { -#ifndef CONFIG_MN10300_USING_JTAG - regs->epsw |= EPSW_T; - clear_thread_flag(TIF_SINGLESTEP); -#else - BUG(); /* no h/w single-step if using JTAG unit */ -#endif - } - - /* deal with pending signal delivery */ - if (thread_info_flags & _TIF_SIGPENDING) - do_signal(regs); - - if (thread_info_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(current_frame()); - } -} diff --git a/arch/mn10300/kernel/smp-low.S b/arch/mn10300/kernel/smp-low.S deleted file mode 100644 index 71f1b2faaa0b..000000000000 --- a/arch/mn10300/kernel/smp-low.S +++ /dev/null @@ -1,97 +0,0 @@ -/* SMP IPI low-level handler - * - * Copyright (C) 2006-2007 Matsushita Electric Industrial Co., Ltd. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - - .am33_2 - -############################################################################### -# -# IPI interrupt handler -# -############################################################################### - .globl mn10300_low_ipi_handler -mn10300_low_ipi_handler: - add -4,sp - mov d0,(sp) - movhu (IAGR),d0 - and IAGR_GN,d0 - lsr 0x2,d0 -#ifdef CONFIG_MN10300_CACHE_ENABLED - cmp FLUSH_CACHE_IPI,d0 - beq mn10300_flush_cache_ipi -#endif - cmp SMP_BOOT_IRQ,d0 - beq mn10300_smp_boot_ipi - /* OTHERS */ - mov (sp),d0 - add 4,sp -#ifdef CONFIG_GDBSTUB - jmp gdbstub_io_rx_handler -#else - jmp end -#endif - -############################################################################### -# -# Cache flush IPI interrupt handler -# -############################################################################### -#ifdef CONFIG_MN10300_CACHE_ENABLED -mn10300_flush_cache_ipi: - mov (sp),d0 - add 4,sp - - /* FLUSH_CACHE_IPI */ - add -4,sp - SAVE_ALL - mov GxICR_DETECT,d2 - movbu d2,(GxICR(FLUSH_CACHE_IPI)) # ACK the interrupt - movhu (GxICR(FLUSH_CACHE_IPI)),d2 - call smp_cache_interrupt[],0 - RESTORE_ALL - jmp end -#endif - -############################################################################### -# -# SMP boot CPU IPI interrupt handler -# -############################################################################### -mn10300_smp_boot_ipi: - /* clear interrupt */ - movhu (GxICR(SMP_BOOT_IRQ)),d0 - and ~GxICR_REQUEST,d0 - movhu d0,(GxICR(SMP_BOOT_IRQ)) - mov (sp),d0 - add 4,sp - - # get stack - mov (CPUID),a0 - add -1,a0 - add a0,a0 - add a0,a0 - mov (start_stack,a0),a0 - mov a0,sp - jmp initialize_secondary - - -# Jump here after RTI to suppress the icache lookahead -end: diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c deleted file mode 100644 index 35d2c3fe6f76..000000000000 --- a/arch/mn10300/kernel/smp.c +++ /dev/null @@ -1,1186 +0,0 @@ -/* SMP support routines. - * - * Copyright (C) 2006-2008 Panasonic Corporation - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "internal.h" - -#ifdef CONFIG_HOTPLUG_CPU -#include - -static unsigned long sleep_mode[NR_CPUS]; - -static void run_sleep_cpu(unsigned int cpu); -static void run_wakeup_cpu(unsigned int cpu); -#endif /* CONFIG_HOTPLUG_CPU */ - -/* - * Debug Message function - */ - -#undef DEBUG_SMP -#ifdef DEBUG_SMP -#define Dprintk(fmt, ...) printk(KERN_DEBUG fmt, ##__VA_ARGS__) -#else -#define Dprintk(fmt, ...) no_printk(KERN_DEBUG fmt, ##__VA_ARGS__) -#endif - -/* timeout value in msec for smp_nmi_call_function. zero is no timeout. */ -#define CALL_FUNCTION_NMI_IPI_TIMEOUT 0 - -/* - * Structure and data for smp_nmi_call_function(). - */ -struct nmi_call_data_struct { - smp_call_func_t func; - void *info; - cpumask_t started; - cpumask_t finished; - int wait; - char size_alignment[0] - __attribute__ ((__aligned__(SMP_CACHE_BYTES))); -} __attribute__ ((__aligned__(SMP_CACHE_BYTES))); - -static DEFINE_SPINLOCK(smp_nmi_call_lock); -static struct nmi_call_data_struct *nmi_call_data; - -/* - * Data structures and variables - */ -static cpumask_t cpu_callin_map; /* Bitmask of callin CPUs */ -static cpumask_t cpu_callout_map; /* Bitmask of callout CPUs */ -cpumask_t cpu_boot_map; /* Bitmask of boot APs */ -unsigned long start_stack[NR_CPUS - 1]; - -/* - * Per CPU parameters - */ -struct mn10300_cpuinfo cpu_data[NR_CPUS] __cacheline_aligned; - -static int cpucount; /* The count of boot CPUs */ -static cpumask_t smp_commenced_mask; -cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; - -/* - * Function Prototypes - */ -static int do_boot_cpu(int); -static void smp_show_cpu_info(int cpu_id); -static void smp_callin(void); -static void smp_online(void); -static void smp_store_cpu_info(int); -static void smp_cpu_init(void); -static void smp_tune_scheduling(void); -static void send_IPI_mask(const cpumask_t *cpumask, int irq); -static void init_ipi(void); - -/* - * IPI Initialization interrupt definitions - */ -static void mn10300_ipi_disable(unsigned int irq); -static void mn10300_ipi_enable(unsigned int irq); -static void mn10300_ipi_chip_disable(struct irq_data *d); -static void mn10300_ipi_chip_enable(struct irq_data *d); -static void mn10300_ipi_ack(struct irq_data *d); -static void mn10300_ipi_nop(struct irq_data *d); - -static struct irq_chip mn10300_ipi_type = { - .name = "cpu_ipi", - .irq_disable = mn10300_ipi_chip_disable, - .irq_enable = mn10300_ipi_chip_enable, - .irq_ack = mn10300_ipi_ack, - .irq_eoi = mn10300_ipi_nop -}; - -static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id); -static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id); - -static struct irqaction reschedule_ipi = { - .handler = smp_reschedule_interrupt, - .flags = IRQF_NOBALANCING, - .name = "smp reschedule IPI" -}; -static struct irqaction call_function_ipi = { - .handler = smp_call_function_interrupt, - .flags = IRQF_NOBALANCING, - .name = "smp call function IPI" -}; - -#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) -static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id); -static struct irqaction local_timer_ipi = { - .handler = smp_ipi_timer_interrupt, - .flags = IRQF_NOBALANCING, - .name = "smp local timer IPI" -}; -#endif - -/** - * init_ipi - Initialise the IPI mechanism - */ -static void init_ipi(void) -{ - unsigned long flags; - u16 tmp16; - - /* set up the reschedule IPI */ - irq_set_chip_and_handler(RESCHEDULE_IPI, &mn10300_ipi_type, - handle_percpu_irq); - setup_irq(RESCHEDULE_IPI, &reschedule_ipi); - set_intr_level(RESCHEDULE_IPI, RESCHEDULE_GxICR_LV); - mn10300_ipi_enable(RESCHEDULE_IPI); - - /* set up the call function IPI */ - irq_set_chip_and_handler(CALL_FUNC_SINGLE_IPI, &mn10300_ipi_type, - handle_percpu_irq); - setup_irq(CALL_FUNC_SINGLE_IPI, &call_function_ipi); - set_intr_level(CALL_FUNC_SINGLE_IPI, CALL_FUNCTION_GxICR_LV); - mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); - - /* set up the local timer IPI */ -#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \ - defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) - irq_set_chip_and_handler(LOCAL_TIMER_IPI, &mn10300_ipi_type, - handle_percpu_irq); - setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi); - set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV); - mn10300_ipi_enable(LOCAL_TIMER_IPI); -#endif - -#ifdef CONFIG_MN10300_CACHE_ENABLED - /* set up the cache flush IPI */ - irq_set_chip(FLUSH_CACHE_IPI, &mn10300_ipi_type); - flags = arch_local_cli_save(); - __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(FLUSH_CACHE_GxICR_LV), - mn10300_low_ipi_handler); - GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; - mn10300_ipi_enable(FLUSH_CACHE_IPI); - arch_local_irq_restore(flags); -#endif - - /* set up the NMI call function IPI */ - irq_set_chip(CALL_FUNCTION_NMI_IPI, &mn10300_ipi_type); - flags = arch_local_cli_save(); - GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; - tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); - arch_local_irq_restore(flags); - - /* set up the SMP boot IPI */ - flags = arch_local_cli_save(); - __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(SMP_BOOT_GxICR_LV), - mn10300_low_ipi_handler); - arch_local_irq_restore(flags); - -#ifdef CONFIG_KERNEL_DEBUGGER - irq_set_chip(DEBUGGER_NMI_IPI, &mn10300_ipi_type); -#endif -} - -/** - * mn10300_ipi_shutdown - Shut down handling of an IPI - * @irq: The IPI to be shut down. - */ -static void mn10300_ipi_shutdown(unsigned int irq) -{ - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - - tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = GxICR(irq); - - arch_local_irq_restore(flags); -} - -/** - * mn10300_ipi_enable - Enable an IPI - * @irq: The IPI to be enabled. - */ -static void mn10300_ipi_enable(unsigned int irq) -{ - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - - tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; - tmp = GxICR(irq); - - arch_local_irq_restore(flags); -} - -static void mn10300_ipi_chip_enable(struct irq_data *d) -{ - mn10300_ipi_enable(d->irq); -} - -/** - * mn10300_ipi_disable - Disable an IPI - * @irq: The IPI to be disabled. - */ -static void mn10300_ipi_disable(unsigned int irq) -{ - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - - tmp = GxICR(irq); - GxICR(irq) = tmp & GxICR_LEVEL; - tmp = GxICR(irq); - - arch_local_irq_restore(flags); -} - -static void mn10300_ipi_chip_disable(struct irq_data *d) -{ - mn10300_ipi_disable(d->irq); -} - - -/** - * mn10300_ipi_ack - Acknowledge an IPI interrupt in the PIC - * @irq: The IPI to be acknowledged. - * - * Clear the interrupt detection flag for the IPI on the appropriate interrupt - * channel in the PIC. - */ -static void mn10300_ipi_ack(struct irq_data *d) -{ - unsigned int irq = d->irq; - unsigned long flags; - u16 tmp; - - flags = arch_local_cli_save(); - GxICR_u8(irq) = GxICR_DETECT; - tmp = GxICR(irq); - arch_local_irq_restore(flags); -} - -/** - * mn10300_ipi_nop - Dummy IPI action - * @irq: The IPI to be acted upon. - */ -static void mn10300_ipi_nop(struct irq_data *d) -{ -} - -/** - * send_IPI_mask - Send IPIs to all CPUs in list - * @cpumask: The list of CPUs to target. - * @irq: The IPI request to be sent. - * - * Send the specified IPI to all the CPUs in the list, not waiting for them to - * finish before returning. The caller is responsible for synchronisation if - * that is needed. - */ -static void send_IPI_mask(const cpumask_t *cpumask, int irq) -{ - int i; - u16 tmp; - - for (i = 0; i < NR_CPUS; i++) { - if (cpumask_test_cpu(i, cpumask)) { - /* send IPI */ - tmp = CROSS_GxICR(irq, i); - CROSS_GxICR(irq, i) = - tmp | GxICR_REQUEST | GxICR_DETECT; - tmp = CROSS_GxICR(irq, i); /* flush write buffer */ - } - } -} - -/** - * send_IPI_self - Send an IPI to this CPU. - * @irq: The IPI request to be sent. - * - * Send the specified IPI to the current CPU. - */ -void send_IPI_self(int irq) -{ - send_IPI_mask(cpumask_of(smp_processor_id()), irq); -} - -/** - * send_IPI_allbutself - Send IPIs to all the other CPUs. - * @irq: The IPI request to be sent. - * - * Send the specified IPI to all CPUs in the system barring the current one, - * not waiting for them to finish before returning. The caller is responsible - * for synchronisation if that is needed. - */ -void send_IPI_allbutself(int irq) -{ - cpumask_t cpumask; - - cpumask_copy(&cpumask, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &cpumask); - send_IPI_mask(&cpumask, irq); -} - -void arch_send_call_function_ipi_mask(const struct cpumask *mask) -{ - BUG(); - /*send_IPI_mask(mask, CALL_FUNCTION_IPI);*/ -} - -void arch_send_call_function_single_ipi(int cpu) -{ - send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI); -} - -/** - * smp_send_reschedule - Send reschedule IPI to a CPU - * @cpu: The CPU to target. - */ -void smp_send_reschedule(int cpu) -{ - send_IPI_mask(cpumask_of(cpu), RESCHEDULE_IPI); -} - -/** - * smp_nmi_call_function - Send a call function NMI IPI to all CPUs - * @func: The function to ask to be run. - * @info: The context data to pass to that function. - * @wait: If true, wait (atomically) until function is run on all CPUs. - * - * Send a non-maskable request to all CPUs in the system, requesting them to - * run the specified function with the given context data, and, potentially, to - * wait for completion of that function on all CPUs. - * - * Returns 0 if successful, -ETIMEDOUT if we were asked to wait, but hit the - * timeout. - */ -int smp_nmi_call_function(smp_call_func_t func, void *info, int wait) -{ - struct nmi_call_data_struct data; - unsigned long flags; - unsigned int cnt; - int cpus, ret = 0; - - cpus = num_online_cpus() - 1; - if (cpus < 1) - return 0; - - data.func = func; - data.info = info; - cpumask_copy(&data.started, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &data.started); - data.wait = wait; - if (wait) - data.finished = data.started; - - spin_lock_irqsave(&smp_nmi_call_lock, flags); - nmi_call_data = &data; - smp_mb(); - - /* Send a message to all other CPUs and wait for them to respond */ - send_IPI_allbutself(CALL_FUNCTION_NMI_IPI); - - /* Wait for response */ - if (CALL_FUNCTION_NMI_IPI_TIMEOUT > 0) { - for (cnt = 0; - cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && - !cpumask_empty(&data.started); - cnt++) - mdelay(1); - - if (wait && cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT) { - for (cnt = 0; - cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && - !cpumask_empty(&data.finished); - cnt++) - mdelay(1); - } - - if (cnt >= CALL_FUNCTION_NMI_IPI_TIMEOUT) - ret = -ETIMEDOUT; - - } else { - /* If timeout value is zero, wait until cpumask has been - * cleared */ - while (!cpumask_empty(&data.started)) - barrier(); - if (wait) - while (!cpumask_empty(&data.finished)) - barrier(); - } - - spin_unlock_irqrestore(&smp_nmi_call_lock, flags); - return ret; -} - -/** - * smp_jump_to_debugger - Make other CPUs enter the debugger by sending an IPI - * - * Send a non-maskable request to all other CPUs in the system, instructing - * them to jump into the debugger. The caller is responsible for checking that - * the other CPUs responded to the instruction. - * - * The caller should make sure that this CPU's debugger IPI is disabled. - */ -void smp_jump_to_debugger(void) -{ - if (num_online_cpus() > 1) - /* Send a message to all other CPUs */ - send_IPI_allbutself(DEBUGGER_NMI_IPI); -} - -/** - * stop_this_cpu - Callback to stop a CPU. - * @unused: Callback context (ignored). - */ -void stop_this_cpu(void *unused) -{ - static volatile int stopflag; - unsigned long flags; - -#ifdef CONFIG_GDBSTUB - /* In case of single stepping smp_send_stop by other CPU, - * clear procindebug to avoid deadlock. - */ - atomic_set(&procindebug[smp_processor_id()], 0); -#endif /* CONFIG_GDBSTUB */ - - flags = arch_local_cli_save(); - set_cpu_online(smp_processor_id(), false); - - while (!stopflag) - cpu_relax(); - - set_cpu_online(smp_processor_id(), true); - arch_local_irq_restore(flags); -} - -/** - * smp_send_stop - Send a stop request to all CPUs. - */ -void smp_send_stop(void) -{ - smp_nmi_call_function(stop_this_cpu, NULL, 0); -} - -/** - * smp_reschedule_interrupt - Reschedule IPI handler - * @irq: The interrupt number. - * @dev_id: The device ID. - * - * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. - */ -static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id) -{ - scheduler_ipi(); - return IRQ_HANDLED; -} - -/** - * smp_call_function_interrupt - Call function IPI handler - * @irq: The interrupt number. - * @dev_id: The device ID. - * - * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. - */ -static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id) -{ - /* generic_smp_call_function_interrupt(); */ - generic_smp_call_function_single_interrupt(); - return IRQ_HANDLED; -} - -/** - * smp_nmi_call_function_interrupt - Non-maskable call function IPI handler - */ -void smp_nmi_call_function_interrupt(void) -{ - smp_call_func_t func = nmi_call_data->func; - void *info = nmi_call_data->info; - int wait = nmi_call_data->wait; - - /* Notify the initiating CPU that I've grabbed the data and am about to - * execute the function - */ - smp_mb(); - cpumask_clear_cpu(smp_processor_id(), &nmi_call_data->started); - (*func)(info); - - if (wait) { - smp_mb(); - cpumask_clear_cpu(smp_processor_id(), - &nmi_call_data->finished); - } -} - -#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \ - defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) -/** - * smp_ipi_timer_interrupt - Local timer IPI handler - * @irq: The interrupt number. - * @dev_id: The device ID. - * - * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. - */ -static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id) -{ - return local_timer_interrupt(); -} -#endif - -void __init smp_init_cpus(void) -{ - int i; - for (i = 0; i < NR_CPUS; i++) { - set_cpu_possible(i, true); - set_cpu_present(i, true); - } -} - -/** - * smp_cpu_init - Initialise AP in start_secondary. - * - * For this Application Processor, set up init_mm, initialise FPU and set - * interrupt level 0-6 setting. - */ -static void __init smp_cpu_init(void) -{ - unsigned long flags; - int cpu_id = smp_processor_id(); - u16 tmp16; - - if (test_and_set_bit(cpu_id, &cpu_initialized)) { - printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id); - for (;;) - local_irq_enable(); - } - printk(KERN_INFO "Initializing CPU#%d\n", cpu_id); - - mmgrab(&init_mm); - current->active_mm = &init_mm; - BUG_ON(current->mm); - - enter_lazy_tlb(&init_mm, current); - - /* Force FPU initialization */ - clear_using_fpu(current); - - GxICR(CALL_FUNC_SINGLE_IPI) = CALL_FUNCTION_GxICR_LV | GxICR_DETECT; - mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); - - GxICR(LOCAL_TIMER_IPI) = LOCAL_TIMER_GxICR_LV | GxICR_DETECT; - mn10300_ipi_enable(LOCAL_TIMER_IPI); - - GxICR(RESCHEDULE_IPI) = RESCHEDULE_GxICR_LV | GxICR_DETECT; - mn10300_ipi_enable(RESCHEDULE_IPI); - -#ifdef CONFIG_MN10300_CACHE_ENABLED - GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; - mn10300_ipi_enable(FLUSH_CACHE_IPI); -#endif - - mn10300_ipi_shutdown(SMP_BOOT_IRQ); - - /* Set up the non-maskable call function IPI */ - flags = arch_local_cli_save(); - GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; - tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); - arch_local_irq_restore(flags); -} - -/** - * smp_prepare_cpu_init - Initialise CPU in startup_secondary - * - * Set interrupt level 0-6 setting and init ICR of the kernel debugger. - */ -void smp_prepare_cpu_init(void) -{ - int loop; - - /* Set the interrupt vector registers */ - IVAR0 = EXCEP_IRQ_LEVEL0; - IVAR1 = EXCEP_IRQ_LEVEL1; - IVAR2 = EXCEP_IRQ_LEVEL2; - IVAR3 = EXCEP_IRQ_LEVEL3; - IVAR4 = EXCEP_IRQ_LEVEL4; - IVAR5 = EXCEP_IRQ_LEVEL5; - IVAR6 = EXCEP_IRQ_LEVEL6; - - /* Disable all interrupts and set to priority 6 (lowest) */ - for (loop = 0; loop < GxICR_NUM_IRQS; loop++) - GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; - -#ifdef CONFIG_KERNEL_DEBUGGER - /* initialise the kernel debugger interrupt */ - do { - unsigned long flags; - u16 tmp16; - - flags = arch_local_cli_save(); - GxICR(DEBUGGER_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; - tmp16 = GxICR(DEBUGGER_NMI_IPI); - arch_local_irq_restore(flags); - } while (0); -#endif -} - -/** - * start_secondary - Activate a secondary CPU (AP) - * @unused: Thread parameter (ignored). - */ -int __init start_secondary(void *unused) -{ - smp_cpu_init(); - smp_callin(); - while (!cpumask_test_cpu(smp_processor_id(), &smp_commenced_mask)) - cpu_relax(); - - local_flush_tlb(); - preempt_disable(); - smp_online(); - -#ifdef CONFIG_GENERIC_CLOCKEVENTS - init_clockevents(); -#endif - cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); - return 0; -} - -/** - * smp_prepare_cpus - Boot up secondary CPUs (APs) - * @max_cpus: Maximum number of CPUs to boot. - * - * Call do_boot_cpu, and boot up APs. - */ -void __init smp_prepare_cpus(unsigned int max_cpus) -{ - int phy_id; - - /* Setup boot CPU information */ - smp_store_cpu_info(0); - smp_tune_scheduling(); - - init_ipi(); - - /* If SMP should be disabled, then finish */ - if (max_cpus == 0) { - printk(KERN_INFO "SMP mode deactivated.\n"); - goto smp_done; - } - - /* Boot secondary CPUs (for which phy_id > 0) */ - for (phy_id = 0; phy_id < NR_CPUS; phy_id++) { - /* Don't boot primary CPU */ - if (max_cpus <= cpucount + 1) - continue; - if (phy_id != 0) - do_boot_cpu(phy_id); - set_cpu_possible(phy_id, true); - smp_show_cpu_info(phy_id); - } - -smp_done: - Dprintk("Boot done.\n"); -} - -/** - * smp_store_cpu_info - Save a CPU's information - * @cpu: The CPU to save for. - * - * Save boot_cpu_data and jiffy for the specified CPU. - */ -static void __init smp_store_cpu_info(int cpu) -{ - struct mn10300_cpuinfo *ci = &cpu_data[cpu]; - - *ci = boot_cpu_data; - ci->loops_per_jiffy = loops_per_jiffy; - ci->type = CPUREV; -} - -/** - * smp_tune_scheduling - Set time slice value - * - * Nothing to do here. - */ -static void __init smp_tune_scheduling(void) -{ -} - -/** - * do_boot_cpu: Boot up one CPU - * @phy_id: Physical ID of CPU to boot. - * - * Send an IPI to a secondary CPU to boot it. Returns 0 on success, 1 - * otherwise. - */ -static int __init do_boot_cpu(int phy_id) -{ - struct task_struct *idle; - unsigned long send_status, callin_status; - int timeout, cpu_id; - - send_status = GxICR_REQUEST; - callin_status = 0; - timeout = 0; - cpu_id = phy_id; - - cpucount++; - - /* Create idle thread for this CPU */ - idle = fork_idle(cpu_id); - if (IS_ERR(idle)) - panic("Failed fork for CPU#%d.", cpu_id); - - idle->thread.pc = (unsigned long)start_secondary; - - printk(KERN_NOTICE "Booting CPU#%d\n", cpu_id); - start_stack[cpu_id - 1] = idle->thread.sp; - - task_thread_info(idle)->cpu = cpu_id; - - /* Send boot IPI to AP */ - send_IPI_mask(cpumask_of(phy_id), SMP_BOOT_IRQ); - - Dprintk("Waiting for send to finish...\n"); - - /* Wait for AP's IPI receive in 100[ms] */ - do { - udelay(1000); - send_status = - CROSS_GxICR(SMP_BOOT_IRQ, phy_id) & GxICR_REQUEST; - } while (send_status == GxICR_REQUEST && timeout++ < 100); - - Dprintk("Waiting for cpu_callin_map.\n"); - - if (send_status == 0) { - /* Allow AP to start initializing */ - cpumask_set_cpu(cpu_id, &cpu_callout_map); - - /* Wait for setting cpu_callin_map */ - timeout = 0; - do { - udelay(1000); - callin_status = cpumask_test_cpu(cpu_id, - &cpu_callin_map); - } while (callin_status == 0 && timeout++ < 5000); - - if (callin_status == 0) - Dprintk("Not responding.\n"); - } else { - printk(KERN_WARNING "IPI not delivered.\n"); - } - - if (send_status == GxICR_REQUEST || callin_status == 0) { - cpumask_clear_cpu(cpu_id, &cpu_callout_map); - cpumask_clear_cpu(cpu_id, &cpu_callin_map); - cpumask_clear_cpu(cpu_id, &cpu_initialized); - cpucount--; - return 1; - } - return 0; -} - -/** - * smp_show_cpu_info - Show SMP CPU information - * @cpu: The CPU of interest. - */ -static void __init smp_show_cpu_info(int cpu) -{ - struct mn10300_cpuinfo *ci = &cpu_data[cpu]; - - printk(KERN_INFO - "CPU#%d : ioclk speed: %lu.%02luMHz : bogomips : %lu.%02lu\n", - cpu, - MN10300_IOCLK / 1000000, - (MN10300_IOCLK / 10000) % 100, - ci->loops_per_jiffy / (500000 / HZ), - (ci->loops_per_jiffy / (5000 / HZ)) % 100); -} - -/** - * smp_callin - Set cpu_callin_map of the current CPU ID - */ -static void __init smp_callin(void) -{ - unsigned long timeout; - int cpu; - - cpu = smp_processor_id(); - timeout = jiffies + (2 * HZ); - - if (cpumask_test_cpu(cpu, &cpu_callin_map)) { - printk(KERN_ERR "CPU#%d already present.\n", cpu); - BUG(); - } - Dprintk("CPU#%d waiting for CALLOUT\n", cpu); - - /* Wait for AP startup 2s total */ - while (time_before(jiffies, timeout)) { - if (cpumask_test_cpu(cpu, &cpu_callout_map)) - break; - cpu_relax(); - } - - if (!time_before(jiffies, timeout)) { - printk(KERN_ERR - "BUG: CPU#%d started up but did not get a callout!\n", - cpu); - BUG(); - } - -#ifdef CONFIG_CALIBRATE_DELAY - calibrate_delay(); /* Get our bogomips */ -#endif - - /* Save our processor parameters */ - smp_store_cpu_info(cpu); - - /* Allow the boot processor to continue */ - cpumask_set_cpu(cpu, &cpu_callin_map); -} - -/** - * smp_online - Set cpu_online_mask - */ -static void __init smp_online(void) -{ - int cpu; - - cpu = smp_processor_id(); - - notify_cpu_starting(cpu); - - set_cpu_online(cpu, true); - - local_irq_enable(); -} - -/** - * smp_cpus_done - - * @max_cpus: Maximum CPU count. - * - * Do nothing. - */ -void __init smp_cpus_done(unsigned int max_cpus) -{ -} - -/* - * smp_prepare_boot_cpu - Set up stuff for the boot processor. - * - * Set up the cpu_online_mask, cpu_callout_map and cpu_callin_map of the boot - * processor (CPU 0). - */ -void smp_prepare_boot_cpu(void) -{ - cpumask_set_cpu(0, &cpu_callout_map); - cpumask_set_cpu(0, &cpu_callin_map); - current_thread_info()->cpu = 0; -} - -/* - * initialize_secondary - Initialise a secondary CPU (Application Processor). - * - * Set SP register and jump to thread's PC address. - */ -void initialize_secondary(void) -{ - asm volatile ( - "mov %0,sp \n" - "jmp (%1) \n" - : - : "a"(current->thread.sp), "a"(current->thread.pc)); -} - -/** - * __cpu_up - Set smp_commenced_mask for the nominated CPU - * @cpu: The target CPU. - */ -int __cpu_up(unsigned int cpu, struct task_struct *tidle) -{ - int timeout; - -#ifdef CONFIG_HOTPLUG_CPU - if (sleep_mode[cpu]) - run_wakeup_cpu(cpu); -#endif /* CONFIG_HOTPLUG_CPU */ - - cpumask_set_cpu(cpu, &smp_commenced_mask); - - /* Wait 5s total for a response */ - for (timeout = 0 ; timeout < 5000 ; timeout++) { - if (cpu_online(cpu)) - break; - udelay(1000); - } - - BUG_ON(!cpu_online(cpu)); - return 0; -} - -/** - * setup_profiling_timer - Set up the profiling timer - * @multiplier - The frequency multiplier to use - * - * The frequency of the profiling timer can be changed by writing a multiplier - * value into /proc/profile. - */ -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - -/* - * CPU hotplug routines - */ -#ifdef CONFIG_HOTPLUG_CPU - -static DEFINE_PER_CPU(struct cpu, cpu_devices); - -static int __init topology_init(void) -{ - int cpu, ret; - - for_each_cpu(cpu) { - ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL); - if (ret) - printk(KERN_WARNING - "topology_init: register_cpu %d failed (%d)\n", - cpu, ret); - } - return 0; -} - -subsys_initcall(topology_init); - -int __cpu_disable(void) -{ - int cpu = smp_processor_id(); - if (cpu == 0) - return -EBUSY; - - migrate_irqs(); - cpumask_clear_cpu(cpu, &mm_cpumask(current->active_mm)); - return 0; -} - -void __cpu_die(unsigned int cpu) -{ - run_sleep_cpu(cpu); -} - -#ifdef CONFIG_MN10300_CACHE_ENABLED -static inline void hotplug_cpu_disable_cache(void) -{ - int tmp; - asm volatile( - " movhu (%1),%0 \n" - " and %2,%0 \n" - " movhu %0,(%1) \n" - "1: movhu (%1),%0 \n" - " btst %3,%0 \n" - " bne 1b \n" - : "=&r"(tmp) - : "a"(&CHCTR), - "i"(~(CHCTR_ICEN | CHCTR_DCEN)), - "i"(CHCTR_ICBUSY | CHCTR_DCBUSY) - : "memory", "cc"); -} - -static inline void hotplug_cpu_enable_cache(void) -{ - int tmp; - asm volatile( - "movhu (%1),%0 \n" - "or %2,%0 \n" - "movhu %0,(%1) \n" - : "=&r"(tmp) - : "a"(&CHCTR), - "i"(CHCTR_ICEN | CHCTR_DCEN) - : "memory", "cc"); -} - -static inline void hotplug_cpu_invalidate_cache(void) -{ - int tmp; - asm volatile ( - "movhu (%1),%0 \n" - "or %2,%0 \n" - "movhu %0,(%1) \n" - : "=&r"(tmp) - : "a"(&CHCTR), - "i"(CHCTR_ICINV | CHCTR_DCINV) - : "cc"); -} - -#else /* CONFIG_MN10300_CACHE_ENABLED */ -#define hotplug_cpu_disable_cache() do {} while (0) -#define hotplug_cpu_enable_cache() do {} while (0) -#define hotplug_cpu_invalidate_cache() do {} while (0) -#endif /* CONFIG_MN10300_CACHE_ENABLED */ - -/** - * hotplug_cpu_nmi_call_function - Call a function on other CPUs for hotplug - * @cpumask: List of target CPUs. - * @func: The function to call on those CPUs. - * @info: The context data for the function to be called. - * @wait: Whether to wait for the calls to complete. - * - * Non-maskably call a function on another CPU for hotplug purposes. - * - * This function must be called with maskable interrupts disabled. - */ -static int hotplug_cpu_nmi_call_function(cpumask_t cpumask, - smp_call_func_t func, void *info, - int wait) -{ - /* - * The address and the size of nmi_call_func_mask_data - * need to be aligned on L1_CACHE_BYTES. - */ - static struct nmi_call_data_struct nmi_call_func_mask_data - __cacheline_aligned; - unsigned long start, end; - - start = (unsigned long)&nmi_call_func_mask_data; - end = start + sizeof(struct nmi_call_data_struct); - - nmi_call_func_mask_data.func = func; - nmi_call_func_mask_data.info = info; - nmi_call_func_mask_data.started = cpumask; - nmi_call_func_mask_data.wait = wait; - if (wait) - nmi_call_func_mask_data.finished = cpumask; - - spin_lock(&smp_nmi_call_lock); - nmi_call_data = &nmi_call_func_mask_data; - mn10300_local_dcache_flush_range(start, end); - smp_wmb(); - - send_IPI_mask(cpumask, CALL_FUNCTION_NMI_IPI); - - do { - mn10300_local_dcache_inv_range(start, end); - barrier(); - } while (!cpumask_empty(&nmi_call_func_mask_data.started)); - - if (wait) { - do { - mn10300_local_dcache_inv_range(start, end); - barrier(); - } while (!cpumask_empty(&nmi_call_func_mask_data.finished)); - } - - spin_unlock(&smp_nmi_call_lock); - return 0; -} - -static void restart_wakeup_cpu(void) -{ - unsigned int cpu = smp_processor_id(); - - cpumask_set_cpu(cpu, &cpu_callin_map); - local_flush_tlb(); - set_cpu_online(cpu, true); - smp_wmb(); -} - -static void prepare_sleep_cpu(void *unused) -{ - sleep_mode[smp_processor_id()] = 1; - smp_mb(); - mn10300_local_dcache_flush_inv(); - hotplug_cpu_disable_cache(); - hotplug_cpu_invalidate_cache(); -} - -/* when this function called, IE=0, NMID=0. */ -static void sleep_cpu(void *unused) -{ - unsigned int cpu_id = smp_processor_id(); - /* - * CALL_FUNCTION_NMI_IPI for wakeup_cpu() shall not be requested, - * before this cpu goes in SLEEP mode. - */ - do { - smp_mb(); - __sleep_cpu(); - } while (sleep_mode[cpu_id]); - restart_wakeup_cpu(); -} - -static void run_sleep_cpu(unsigned int cpu) -{ - unsigned long flags; - cpumask_t cpumask; - - cpumask_copy(&cpumask, &cpumask_of(cpu)); - flags = arch_local_cli_save(); - hotplug_cpu_nmi_call_function(cpumask, prepare_sleep_cpu, NULL, 1); - hotplug_cpu_nmi_call_function(cpumask, sleep_cpu, NULL, 0); - udelay(1); /* delay for the cpu to sleep. */ - arch_local_irq_restore(flags); -} - -static void wakeup_cpu(void) -{ - hotplug_cpu_invalidate_cache(); - hotplug_cpu_enable_cache(); - smp_mb(); - sleep_mode[smp_processor_id()] = 0; -} - -static void run_wakeup_cpu(unsigned int cpu) -{ - unsigned long flags; - - flags = arch_local_cli_save(); -#if NR_CPUS == 2 - mn10300_local_dcache_flush_inv(); -#else - /* - * Before waking up the cpu, - * all online cpus should stop and flush D-Cache for global data. - */ -#error not support NR_CPUS > 2, when CONFIG_HOTPLUG_CPU=y. -#endif - hotplug_cpu_nmi_call_function(cpumask_of(cpu), wakeup_cpu, NULL, 1); - arch_local_irq_restore(flags); -} - -#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S deleted file mode 100644 index de3e74fc9ea0..000000000000 --- a/arch/mn10300/kernel/switch_to.S +++ /dev/null @@ -1,179 +0,0 @@ -############################################################################### -# -# MN10300 Context switch operation -# -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#ifdef CONFIG_SMP -#include -#endif /* CONFIG_SMP */ - - .text - -############################################################################### -# -# struct task_struct *__switch_to(struct thread_struct *prev, -# struct thread_struct *next, -# struct task_struct *prev_task) -# -############################################################################### -ENTRY(__switch_to) - movm [d2,d3,a2,a3,exreg1],(sp) - or EPSW_NMID,epsw - - mov (44,sp),d2 - - mov d0,a0 - mov d1,a1 - - # save prev context - mov __switch_back,d0 - mov sp,a2 - mov a2,(THREAD_SP,a0) - mov a3,(THREAD_A3,a0) - -#ifdef CONFIG_KGDB - btst 0xff,(kgdb_single_step) - bne __switch_to__lift_sstep_bp -__switch_to__continue: -#endif - mov d0,(THREAD_PC,a0) - - mov (THREAD_A3,a1),a3 - mov (THREAD_SP,a1),a2 - - # switch - mov a2,sp - - # load next context - GET_THREAD_INFO a2 - mov a2,(__current_ti) - mov (TI_task,a2),a2 - mov a2,(__current) -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - mov a2,e2 -#endif - - mov (THREAD_PC,a1),a2 - mov d2,d0 # for ret_from_fork - mov d0,a0 # for __switch_to - - jmp (a2) - -__switch_back: - and ~EPSW_NMID,epsw - ret [d2,d3,a2,a3,exreg1],32 - -#ifdef CONFIG_KGDB -############################################################################### -# -# Lift the single-step breakpoints when the task being traced is switched out -# A0 = prev -# A1 = next -# -############################################################################### -__switch_to__lift_sstep_bp: - add -12,sp - mov a0,e4 - mov a1,e5 - - # Clear the single-step flag to prevent us coming this way until we get - # switched back in - bclr 0xff,(kgdb_single_step) - - # Remove first breakpoint - mov (kgdb_sstep_bp_addr),a2 - cmp 0,a2 - beq 1f - movbu (kgdb_sstep_bp),d0 - movbu d0,(a2) -#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE) - mov a2,d0 - mov a2,d1 - add 1,d1 - calls flush_icache_range -#endif -1: - - # Remove second breakpoint - mov (kgdb_sstep_bp_addr+4),a2 - cmp 0,a2 - beq 2f - movbu (kgdb_sstep_bp+1),d0 - movbu d0,(a2) -#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE) - mov a2,d0 - mov a2,d1 - add 1,d1 - calls flush_icache_range -#endif -2: - - # Change the resumption address and return - mov __switch_back__reinstall_sstep_bp,d0 - mov e4,a0 - mov e5,a1 - add 12,sp - bra __switch_to__continue - -############################################################################### -# -# Reinstall the single-step breakpoints when the task being traced is switched -# back in (A1 points to the new thread_struct). -# -############################################################################### -__switch_back__reinstall_sstep_bp: - add -12,sp - mov a0,e4 # save the return value - mov 0xff,d3 - - # Reinstall first breakpoint - mov (kgdb_sstep_bp_addr),a2 - cmp 0,a2 - beq 1f - movbu (a2),d0 - movbu d0,(kgdb_sstep_bp) - movbu d3,(a2) -#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE) - mov a2,d0 - mov a2,d1 - add 1,d1 - calls flush_icache_range -#endif -1: - - # Reinstall second breakpoint - mov (kgdb_sstep_bp_addr+4),a2 - cmp 0,a2 - beq 2f - movbu (a2),d0 - movbu d0,(kgdb_sstep_bp+1) - movbu d3,(a2) -#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE) - mov a2,d0 - mov a2,d1 - add 1,d1 - calls flush_icache_range -#endif -2: - - mov d3,(kgdb_single_step) - - # Restore the return value (the previous thread_struct pointer) - mov e4,a0 - mov a0,d0 - add 12,sp - bra __switch_back - -#endif /* CONFIG_KGDB */ diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c deleted file mode 100644 index f999981e55c0..000000000000 --- a/arch/mn10300/kernel/sys_mn10300.c +++ /dev/null @@ -1,33 +0,0 @@ -/* MN10300 Weird system calls - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -asmlinkage long old_mmap(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long offset) -{ - if (offset & ~PAGE_MASK) - return -EINVAL; - return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); -} diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c deleted file mode 100644 index 06b83b17c5f1..000000000000 --- a/arch/mn10300/kernel/time.c +++ /dev/null @@ -1,125 +0,0 @@ -/* MN10300 Low level time management - * - * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/i386/kernel/time.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "internal.h" - -static unsigned long mn10300_last_tsc; /* time-stamp counter at last time - * interrupt occurred */ - -static unsigned long sched_clock_multiplier; - -/* - * scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - union { - unsigned long long ll; - unsigned l[2]; - } tsc64, result; - unsigned long tmp; - unsigned product[3]; /* 96-bit intermediate value */ - - /* cnt32_to_63() is not safe with preemption */ - preempt_disable(); - - /* expand the tsc to 64-bits. - * - sched_clock() must be called once a minute or better or the - * following will go horribly wrong - see cnt32_to_63() - */ - tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL; - - preempt_enable(); - - /* scale the 64-bit TSC value to a nanosecond value via a 96-bit - * intermediate - */ - asm("mulu %2,%0,%3,%0 \n" /* LSW * mult -> 0:%3:%0 */ - "mulu %2,%1,%2,%1 \n" /* MSW * mult -> %2:%1:0 */ - "add %3,%1 \n" - "addc 0,%2 \n" /* result in %2:%1:%0 */ - : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp) - : "0"(tsc64.l[0]), "1"(tsc64.l[1]), "2"(sched_clock_multiplier) - : "cc"); - - result.l[0] = product[1] << 16 | product[0] >> 16; - result.l[1] = product[2] << 16 | product[1] >> 16; - - return result.ll; -} - -/* - * initialise the scheduler clock - */ -static void __init mn10300_sched_clock_init(void) -{ - sched_clock_multiplier = - __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK); -} - -/** - * local_timer_interrupt - Local timer interrupt handler - * - * Handle local timer interrupts for this CPU. They may have been propagated - * to this CPU from the CPU that actually gets them by way of an IPI. - */ -irqreturn_t local_timer_interrupt(void) -{ - profile_tick(CPU_PROFILING); - update_process_times(user_mode(get_irq_regs())); - return IRQ_HANDLED; -} - -/* - * initialise the various timers used by the main part of the kernel - */ -void __init time_init(void) -{ - /* we need the prescalar running to be able to use IOCLK/8 - * - IOCLK runs at 1/4 (ST5 open) or 1/8 (ST5 closed) internal CPU clock - * - IOCLK runs at Fosc rate (crystal speed) - */ - TMPSCNT |= TMPSCNT_ENABLE; - - init_clocksource(); - - printk(KERN_INFO - "timestamp counter I/O clock running at %lu.%02lu" - " (calibrated against RTC)\n", - MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100); - - mn10300_last_tsc = read_timestamp_counter(); - - init_clockevents(); - -#ifdef CONFIG_MN10300_WD_TIMER - /* start the watchdog timer */ - watchdog_go(); -#endif - - mn10300_sched_clock_init(); -} diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c deleted file mode 100644 index 72d1015b2ae7..000000000000 --- a/arch/mn10300/kernel/traps.c +++ /dev/null @@ -1,615 +0,0 @@ -/* MN10300 Exception handling - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "internal.h" - -#if (CONFIG_INTERRUPT_VECTOR_BASE & 0xffffff) -#error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!" -#endif - -int kstack_depth_to_print = 24; - -spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock); - -struct exception_to_signal_map { - u8 signo; - u32 si_code; -}; - -static const struct exception_to_signal_map exception_to_signal_map[256] = { - /* MMU exceptions */ - [EXCEP_ITLBMISS >> 3] = { 0, 0 }, - [EXCEP_DTLBMISS >> 3] = { 0, 0 }, - [EXCEP_IAERROR >> 3] = { 0, 0 }, - [EXCEP_DAERROR >> 3] = { 0, 0 }, - - /* system exceptions */ - [EXCEP_TRAP >> 3] = { SIGTRAP, TRAP_BRKPT }, - [EXCEP_ISTEP >> 3] = { SIGTRAP, TRAP_TRACE }, /* Monitor */ - [EXCEP_IBREAK >> 3] = { SIGTRAP, TRAP_HWBKPT }, /* Monitor */ - [EXCEP_OBREAK >> 3] = { SIGTRAP, TRAP_HWBKPT }, /* Monitor */ - [EXCEP_PRIVINS >> 3] = { SIGILL, ILL_PRVOPC }, - [EXCEP_UNIMPINS >> 3] = { SIGILL, ILL_ILLOPC }, - [EXCEP_UNIMPEXINS >> 3] = { SIGILL, ILL_ILLOPC }, - [EXCEP_MEMERR >> 3] = { SIGSEGV, SEGV_ACCERR }, - [EXCEP_MISALIGN >> 3] = { SIGBUS, BUS_ADRALN }, - [EXCEP_BUSERROR >> 3] = { SIGBUS, BUS_ADRERR }, - [EXCEP_ILLINSACC >> 3] = { SIGSEGV, SEGV_ACCERR }, - [EXCEP_ILLDATACC >> 3] = { SIGSEGV, SEGV_ACCERR }, - [EXCEP_IOINSACC >> 3] = { SIGSEGV, SEGV_ACCERR }, - [EXCEP_PRIVINSACC >> 3] = { SIGSEGV, SEGV_ACCERR }, /* userspace */ - [EXCEP_PRIVDATACC >> 3] = { SIGSEGV, SEGV_ACCERR }, /* userspace */ - [EXCEP_DATINSACC >> 3] = { SIGSEGV, SEGV_ACCERR }, - [EXCEP_DOUBLE_FAULT >> 3] = { SIGILL, ILL_BADSTK }, - - /* FPU exceptions */ - [EXCEP_FPU_DISABLED >> 3] = { SIGILL, ILL_COPROC }, - [EXCEP_FPU_UNIMPINS >> 3] = { SIGILL, ILL_COPROC }, - [EXCEP_FPU_OPERATION >> 3] = { SIGFPE, FPE_INTDIV }, - - /* interrupts */ - [EXCEP_WDT >> 3] = { SIGALRM, 0 }, - [EXCEP_NMI >> 3] = { SIGQUIT, 0 }, - [EXCEP_IRQ_LEVEL0 >> 3] = { SIGINT, 0 }, - [EXCEP_IRQ_LEVEL1 >> 3] = { 0, 0 }, - [EXCEP_IRQ_LEVEL2 >> 3] = { 0, 0 }, - [EXCEP_IRQ_LEVEL3 >> 3] = { 0, 0 }, - [EXCEP_IRQ_LEVEL4 >> 3] = { 0, 0 }, - [EXCEP_IRQ_LEVEL5 >> 3] = { 0, 0 }, - [EXCEP_IRQ_LEVEL6 >> 3] = { 0, 0 }, - - /* system calls */ - [EXCEP_SYSCALL0 >> 3] = { 0, 0 }, - [EXCEP_SYSCALL1 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL2 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL3 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL4 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL5 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL6 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL7 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL8 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL9 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL10 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL11 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL12 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL13 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL14 >> 3] = { SIGILL, ILL_ILLTRP }, - [EXCEP_SYSCALL15 >> 3] = { SIGABRT, 0 }, -}; - -/* - * Handle kernel exceptions. - * - * See if there's a fixup handler we can force a jump to when an exception - * happens due to something kernel code did - */ -int die_if_no_fixup(const char *str, struct pt_regs *regs, - enum exception_code code) -{ - u8 opcode; - int signo, si_code; - - if (user_mode(regs)) - return 0; - - peripheral_leds_display_exception(code); - - signo = exception_to_signal_map[code >> 3].signo; - si_code = exception_to_signal_map[code >> 3].si_code; - - switch (code) { - /* see if we can fixup the kernel accessing memory */ - case EXCEP_ITLBMISS: - case EXCEP_DTLBMISS: - case EXCEP_IAERROR: - case EXCEP_DAERROR: - case EXCEP_MEMERR: - case EXCEP_MISALIGN: - case EXCEP_BUSERROR: - case EXCEP_ILLDATACC: - case EXCEP_IOINSACC: - case EXCEP_PRIVINSACC: - case EXCEP_PRIVDATACC: - case EXCEP_DATINSACC: - if (fixup_exception(regs)) - return 1; - break; - - case EXCEP_TRAP: - case EXCEP_UNIMPINS: - if (probe_kernel_read(&opcode, (u8 *)regs->pc, 1) < 0) - break; - if (opcode == 0xff) { - if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0)) - return 1; - if (at_debugger_breakpoint(regs)) - regs->pc++; - signo = SIGTRAP; - si_code = TRAP_BRKPT; - } - break; - - case EXCEP_SYSCALL1 ... EXCEP_SYSCALL14: - /* syscall return addr is _after_ the instruction */ - regs->pc -= 2; - break; - - case EXCEP_SYSCALL15: - if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_WARN) - return 1; - - /* syscall return addr is _after_ the instruction */ - regs->pc -= 2; - break; - - default: - break; - } - - if (debugger_intercept(code, signo, si_code, regs) == 0) - return 1; - - if (notify_die(DIE_GPF, str, regs, code, 0, 0)) - return 1; - - /* make the process die as the last resort */ - die(str, regs, code); -} - -/* - * General exception handler - */ -asmlinkage void handle_exception(struct pt_regs *regs, u32 intcode) -{ - siginfo_t info; - - /* deal with kernel exceptions here */ - if (die_if_no_fixup(NULL, regs, intcode)) - return; - - /* otherwise it's a userspace exception */ - info.si_signo = exception_to_signal_map[intcode >> 3].signo; - info.si_code = exception_to_signal_map[intcode >> 3].si_code; - info.si_errno = 0; - info.si_addr = (void *) regs->pc; - force_sig_info(info.si_signo, &info, current); -} - -/* - * handle NMI - */ -asmlinkage void nmi(struct pt_regs *regs, enum exception_code code) -{ - /* see if gdbstub wants to deal with it */ - if (debugger_intercept(code, SIGQUIT, 0, regs)) - return; - - printk(KERN_WARNING "--- Register Dump ---\n"); - show_registers(regs); - printk(KERN_WARNING "---------------------\n"); -} - -/* - * show a stack trace from the specified stack pointer - */ -void show_trace(unsigned long *sp) -{ - unsigned long bottom, stack, addr, fp, raslot; - - printk(KERN_EMERG "\nCall Trace:\n"); - - //stack = (unsigned long)sp; - asm("mov sp,%0" : "=a"(stack)); - asm("mov a3,%0" : "=r"(fp)); - - raslot = ULONG_MAX; - bottom = (stack + THREAD_SIZE) & ~(THREAD_SIZE - 1); - for (; stack < bottom; stack += sizeof(addr)) { - addr = *(unsigned long *)stack; - if (stack == fp) { - if (addr > stack && addr < bottom) { - fp = addr; - raslot = stack + sizeof(addr); - continue; - } - fp = 0; - raslot = ULONG_MAX; - } - - if (__kernel_text_address(addr)) { - printk(" [<%08lx>]", addr); - if (stack >= raslot) - raslot = ULONG_MAX; - else - printk(" ?"); - printk(" %pS\n", (void *)addr); - } - } - - printk("\n"); -} - -/* - * show the raw stack from the specified stack pointer - */ -void show_stack(struct task_struct *task, unsigned long *sp) -{ - unsigned long *stack; - int i; - - if (!sp) - sp = (unsigned long *) &sp; - - stack = sp; - printk(KERN_EMERG "Stack:"); - for (i = 0; i < kstack_depth_to_print; i++) { - if (((long) stack & (THREAD_SIZE - 1)) == 0) - break; - if ((i % 8) == 0) - printk(KERN_EMERG " "); - printk("%08lx ", *stack++); - } - - show_trace(sp); -} - -/* - * dump the register file in the specified exception frame - */ -void show_registers_only(struct pt_regs *regs) -{ - unsigned long ssp; - - ssp = (unsigned long) regs + sizeof(*regs); - - printk(KERN_EMERG "PC: %08lx EPSW: %08lx SSP: %08lx mode: %s\n", - regs->pc, regs->epsw, ssp, user_mode(regs) ? "User" : "Super"); - printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", - regs->d0, regs->d1, regs->d2, regs->d3); - printk(KERN_EMERG "a0: %08lx a1: %08lx a2: %08lx a3: %08lx\n", - regs->a0, regs->a1, regs->a2, regs->a3); - printk(KERN_EMERG "e0: %08lx e1: %08lx e2: %08lx e3: %08lx\n", - regs->e0, regs->e1, regs->e2, regs->e3); - printk(KERN_EMERG "e4: %08lx e5: %08lx e6: %08lx e7: %08lx\n", - regs->e4, regs->e5, regs->e6, regs->e7); - printk(KERN_EMERG "lar: %08lx lir: %08lx mdr: %08lx usp: %08lx\n", - regs->lar, regs->lir, regs->mdr, regs->sp); - printk(KERN_EMERG "cvf: %08lx crl: %08lx crh: %08lx drq: %08lx\n", - regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq); - printk(KERN_EMERG "threadinfo=%p task=%p)\n", - current_thread_info(), current); - - if ((unsigned long) current >= PAGE_OFFSET && - (unsigned long) current < (unsigned long)high_memory) - printk(KERN_EMERG "Process %s (pid: %d)\n", - current->comm, current->pid); - -#ifdef CONFIG_SMP - printk(KERN_EMERG "CPUID: %08x\n", CPUID); -#endif - printk(KERN_EMERG "CPUP: %04hx\n", CPUP); - printk(KERN_EMERG "TBR: %08x\n", TBR); - printk(KERN_EMERG "DEAR: %08x\n", DEAR); - printk(KERN_EMERG "sISR: %08x\n", sISR); - printk(KERN_EMERG "NMICR: %04hx\n", NMICR); - printk(KERN_EMERG "BCBERR: %08x\n", BCBERR); - printk(KERN_EMERG "BCBEAR: %08x\n", BCBEAR); - printk(KERN_EMERG "MMUFCR: %08x\n", MMUFCR); - printk(KERN_EMERG "IPTEU : %08x IPTEL2: %08x\n", IPTEU, IPTEL2); - printk(KERN_EMERG "DPTEU: %08x DPTEL2: %08x\n", DPTEU, DPTEL2); -} - -/* - * dump the registers and the stack - */ -void show_registers(struct pt_regs *regs) -{ - unsigned long sp; - int i; - - show_registers_only(regs); - - if (!user_mode(regs)) - sp = (unsigned long) regs + sizeof(*regs); - else - sp = regs->sp; - - /* when in-kernel, we also print out the stack and code at the - * time of the fault.. - */ - if (!user_mode(regs)) { - printk(KERN_EMERG "\n"); - show_stack(current, (unsigned long *) sp); - -#if 0 - printk(KERN_EMERG "\nCode: "); - if (regs->pc < PAGE_OFFSET) - goto bad; - - for (i = 0; i < 20; i++) { - unsigned char c; - if (__get_user(c, &((unsigned char *) regs->pc)[i])) - goto bad; - printk("%02x ", c); - } -#else - i = 0; -#endif - } - - printk("\n"); - return; - -#if 0 -bad: - printk(KERN_EMERG " Bad PC value."); - break; -#endif -} - -/* - * - */ -void show_trace_task(struct task_struct *tsk) -{ - unsigned long sp = tsk->thread.sp; - - /* User space on another CPU? */ - if ((sp ^ (unsigned long) tsk) & (PAGE_MASK << 1)) - return; - - show_trace((unsigned long *) sp); -} - -/* - * note the untimely death of part of the kernel - */ -void die(const char *str, struct pt_regs *regs, enum exception_code code) -{ - console_verbose(); - spin_lock_irq(&die_lock); - printk(KERN_EMERG "\n%s: %04x\n", - str, code & 0xffff); - show_registers(regs); - - if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 && - (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) { - printk(KERN_EMERG "Exception in usermode interrupt handler\n"); - printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n"); - asm volatile ("0: bra 0b"); - } - - spin_unlock_irq(&die_lock); - do_exit(SIGSEGV); -} - -/* - * display the register file when the stack pointer gets clobbered - */ -asmlinkage void do_double_fault(struct pt_regs *regs) -{ - struct task_struct *tsk = current; - - strcpy(tsk->comm, "emergency tsk"); - tsk->pid = 0; - console_verbose(); - printk(KERN_EMERG "--- double fault ---\n"); - show_registers(regs); -} - -/* - * asynchronous bus error (external, usually I/O DMA) - */ -asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs) -{ - console_verbose(); - - printk(KERN_EMERG "Asynchronous I/O Bus Error\n"); - printk(KERN_EMERG "==========================\n"); - - if (bcberr & BCBERR_BEME) - printk(KERN_EMERG "- Multiple recorded errors\n"); - - printk(KERN_EMERG "- Faulting Buses:%s%s%s\n", - bcberr & BCBERR_BEMR_CI ? " CPU-Ins-Fetch" : "", - bcberr & BCBERR_BEMR_CD ? " CPU-Data" : "", - bcberr & BCBERR_BEMR_DMA ? " DMA" : ""); - - printk(KERN_EMERG "- %s %s access made to %s at address %08x\n", - bcberr & BCBERR_BEBST ? "Burst" : "Single", - bcberr & BCBERR_BERW ? "Read" : "Write", - bcberr & BCBERR_BESB_MON ? "Monitor Space" : - bcberr & BCBERR_BESB_IO ? "Internal CPU I/O Space" : - bcberr & BCBERR_BESB_EX ? "External I/O Bus" : - bcberr & BCBERR_BESB_OPEX ? "External Memory Bus" : - "On Chip Memory", - bcbear - ); - - printk(KERN_EMERG "- Detected by the %s\n", - bcberr&BCBERR_BESD ? "Bus Control Unit" : "Slave Bus"); - -#ifdef CONFIG_PCI -#define BRIDGEREGB(X) (*(volatile __u8 *)(0xBE040000 + (X))) -#define BRIDGEREGW(X) (*(volatile __u16 *)(0xBE040000 + (X))) -#define BRIDGEREGL(X) (*(volatile __u32 *)(0xBE040000 + (X))) - - printk(KERN_EMERG "- PCI Memory Paging Reg: %08x\n", - *(volatile __u32 *) (0xBFFFFFF4)); - printk(KERN_EMERG "- PCI Bridge Base Address 0: %08x\n", - BRIDGEREGL(PCI_BASE_ADDRESS_0)); - printk(KERN_EMERG "- PCI Bridge AMPCI Base Address: %08x\n", - BRIDGEREGL(0x48)); - printk(KERN_EMERG "- PCI Bridge Command: %04hx\n", - BRIDGEREGW(PCI_COMMAND)); - printk(KERN_EMERG "- PCI Bridge Status: %04hx\n", - BRIDGEREGW(PCI_STATUS)); - printk(KERN_EMERG "- PCI Bridge Int Status: %08hx\n", - BRIDGEREGL(0x4c)); -#endif - - printk(KERN_EMERG "\n"); - show_registers(regs); - - panic("Halted due to asynchronous I/O Bus Error\n"); -} - -/* - * handle an exception for which a handler has not yet been installed - */ -asmlinkage void uninitialised_exception(struct pt_regs *regs, - enum exception_code code) -{ - - /* see if gdbstub wants to deal with it */ - if (debugger_intercept(code, SIGSYS, 0, regs) == 0) - return; - - peripheral_leds_display_exception(code); - printk(KERN_EMERG "Uninitialised Exception 0x%04x\n", code & 0xFFFF); - show_registers(regs); - - for (;;) - continue; -} - -/* - * set an interrupt stub to jump to a handler - * ! NOTE: this does *not* flush the caches - */ -void __init __set_intr_stub(enum exception_code code, void *handler) -{ - unsigned long addr; - u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code); - - addr = (unsigned long) handler - (unsigned long) vector; - vector[0] = 0xdc; /* JMP handler */ - vector[1] = addr; - vector[2] = addr >> 8; - vector[3] = addr >> 16; - vector[4] = addr >> 24; - vector[5] = 0xcb; - vector[6] = 0xcb; - vector[7] = 0xcb; -} - -/* - * set an interrupt stub to jump to a handler - */ -void __init set_intr_stub(enum exception_code code, void *handler) -{ - unsigned long addr; - u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code); - unsigned long flags; - - addr = (unsigned long) handler - (unsigned long) vector; - - flags = arch_local_cli_save(); - - vector[0] = 0xdc; /* JMP handler */ - vector[1] = addr; - vector[2] = addr >> 8; - vector[3] = addr >> 16; - vector[4] = addr >> 24; - vector[5] = 0xcb; - vector[6] = 0xcb; - vector[7] = 0xcb; - - arch_local_irq_restore(flags); - -#ifndef CONFIG_MN10300_CACHE_SNOOP - mn10300_dcache_flush_inv(); - mn10300_icache_inv(); -#endif -} - -/* - * initialise the exception table - */ -void __init trap_init(void) -{ - set_excp_vector(EXCEP_TRAP, handle_exception); - set_excp_vector(EXCEP_ISTEP, handle_exception); - set_excp_vector(EXCEP_IBREAK, handle_exception); - set_excp_vector(EXCEP_OBREAK, handle_exception); - - set_excp_vector(EXCEP_PRIVINS, handle_exception); - set_excp_vector(EXCEP_UNIMPINS, handle_exception); - set_excp_vector(EXCEP_UNIMPEXINS, handle_exception); - set_excp_vector(EXCEP_MEMERR, handle_exception); - set_excp_vector(EXCEP_MISALIGN, misalignment); - set_excp_vector(EXCEP_BUSERROR, handle_exception); - set_excp_vector(EXCEP_ILLINSACC, handle_exception); - set_excp_vector(EXCEP_ILLDATACC, handle_exception); - set_excp_vector(EXCEP_IOINSACC, handle_exception); - set_excp_vector(EXCEP_PRIVINSACC, handle_exception); - set_excp_vector(EXCEP_PRIVDATACC, handle_exception); - set_excp_vector(EXCEP_DATINSACC, handle_exception); - set_excp_vector(EXCEP_FPU_UNIMPINS, handle_exception); - set_excp_vector(EXCEP_FPU_OPERATION, fpu_exception); - - set_excp_vector(EXCEP_NMI, nmi); - - set_excp_vector(EXCEP_SYSCALL1, handle_exception); - set_excp_vector(EXCEP_SYSCALL2, handle_exception); - set_excp_vector(EXCEP_SYSCALL3, handle_exception); - set_excp_vector(EXCEP_SYSCALL4, handle_exception); - set_excp_vector(EXCEP_SYSCALL5, handle_exception); - set_excp_vector(EXCEP_SYSCALL6, handle_exception); - set_excp_vector(EXCEP_SYSCALL7, handle_exception); - set_excp_vector(EXCEP_SYSCALL8, handle_exception); - set_excp_vector(EXCEP_SYSCALL9, handle_exception); - set_excp_vector(EXCEP_SYSCALL10, handle_exception); - set_excp_vector(EXCEP_SYSCALL11, handle_exception); - set_excp_vector(EXCEP_SYSCALL12, handle_exception); - set_excp_vector(EXCEP_SYSCALL13, handle_exception); - set_excp_vector(EXCEP_SYSCALL14, handle_exception); - set_excp_vector(EXCEP_SYSCALL15, handle_exception); -} - -/* - * determine if a program counter value is a valid bug address - */ -int is_valid_bugaddr(unsigned long pc) -{ - return pc >= PAGE_OFFSET; -} diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S deleted file mode 100644 index 2d5f1c3f1afb..000000000000 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ /dev/null @@ -1,94 +0,0 @@ -/* MN10300 Main kernel linker script - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#define __VMLINUX_LDS__ -#include -#include -#include - -OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin") -OUTPUT_ARCH(mn10300) -ENTRY(_start) -jiffies = jiffies_64; -#ifndef CONFIG_MN10300_CURRENT_IN_E2 -current = __current; -#endif -SECTIONS -{ - . = CONFIG_KERNEL_TEXT_ADDRESS; - /* read-only */ - _stext = .; - _text = .; /* Text and read-only data */ - .text : { - HEAD_TEXT - TEXT_TEXT - SCHED_TEXT - CPUIDLE_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.fixup) - *(.gnu.warning) - } = 0xcb - - _etext = .; /* End of text section */ - - EXCEPTION_TABLE(16) - BUG_TABLE - - RO_DATA(PAGE_SIZE) - - /* writeable */ - _sdata = .; /* Start of rw data section */ - RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) - _edata = .; - - /* might get freed after init */ - . = ALIGN(PAGE_SIZE); - .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { - __smp_locks = .; - *(.smp_locks) - __smp_locks_end = .; - } - - /* will be freed after init */ - . = ALIGN(PAGE_SIZE); /* Init code and data */ - __init_begin = .; - INIT_TEXT_SECTION(PAGE_SIZE) - INIT_DATA_SECTION(16) - . = ALIGN(4); - __alt_instructions = .; - .altinstructions : { *(.altinstructions) } - __alt_instructions_end = .; - .altinstr_replacement : { *(.altinstr_replacement) } - /* .exit.text is discard at runtime, not link time, to deal with references - from .altinstructions and .eh_frame */ - .exit.text : { EXIT_TEXT; } - .exit.data : { EXIT_DATA; } - - PERCPU_SECTION(32) - . = ALIGN(PAGE_SIZE); - __init_end = .; - /* freed after init ends here */ - - BSS_SECTION(0, PAGE_SIZE, 4) - - _end = . ; - - /* This is where the kernel creates the early boot page tables */ - . = ALIGN(PAGE_SIZE); - pg0 = .; - - STABS_DEBUG - - DWARF_DEBUG - - /* Sections to be discarded */ - DISCARDS -} diff --git a/arch/mn10300/lib/Makefile b/arch/mn10300/lib/Makefile deleted file mode 100644 index 0cd2346f4c13..000000000000 --- a/arch/mn10300/lib/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the MN10300-specific library files.. -# - -lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o -lib-y += do_csum.o -lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o __ucmpdi2.o diff --git a/arch/mn10300/lib/__ashldi3.S b/arch/mn10300/lib/__ashldi3.S deleted file mode 100644 index a51a9506f00c..000000000000 --- a/arch/mn10300/lib/__ashldi3.S +++ /dev/null @@ -1,51 +0,0 @@ -/* MN10300 64-bit arithmetic left shift - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include - - .text - .balign L1_CACHE_BYTES - -############################################################################### -# -# unsigned long long __ashldi3(unsigned long long value [D1:D0], -# unsigned by [(12,SP)]) -# -############################################################################### - .globl __ashldi3 - .type __ashldi3,@function -__ashldi3: - mov (12,sp),a0 - and +63,a0 - beq __ashldi3_zero - - cmp +31,a0 - bhi __ashldi3_32plus - - # the count is in the range 1-31 - asl a0,d1 - - mov +32,a1 - sub a0,a1,a1 # a1 = 32 - count - lsr a1,d0,a1 # get overflow from LSW -> MSW - - or_asl a1,d1,a0,d0 # insert overflow into MSW and - # shift the LSW - rets - - .balign L1_CACHE_BYTES - # the count is in the range 32-63 -__ashldi3_32plus: - asl a0,d0,d1 - clr d0 -__ashldi3_zero: - rets - - .size __ashldi3, .-__ashldi3 diff --git a/arch/mn10300/lib/__ashrdi3.S b/arch/mn10300/lib/__ashrdi3.S deleted file mode 100644 index 6f42382728cb..000000000000 --- a/arch/mn10300/lib/__ashrdi3.S +++ /dev/null @@ -1,52 +0,0 @@ -/* MN10300 64-bit arithmetic right shift - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include - - .text - .balign L1_CACHE_BYTES - -############################################################################### -# -# unsigned long long __ashrdi3(unsigned long long value [D1:D0], -# unsigned by [(12,SP)]) -# -############################################################################### - .globl __ashrdi3 - .type __ashrdi3,@function -__ashrdi3: - mov (12,sp),a0 - and +63,a0 - beq __ashrdi3_zero - - cmp +31,a0 - bhi __ashrdi3_32plus - - # the count is in the range 1-31 - lsr a0,d0 - - mov +32,a1 - sub a0,a1,a1 # a1 = 32 - count - asl a1,d1,a1 # get underflow from MSW -> LSW - - or_asr a1,d0,a0,d1 # insert underflow into LSW and - # shift the MSW - rets - - .balign L1_CACHE_BYTES - # the count is in the range 32-63 -__ashrdi3_32plus: - asr a0,d1,d0 - ext d0 # sign-extend result through MDR - mov mdr,d1 -__ashrdi3_zero: - rets - - .size __ashrdi3, .-__ashrdi3 diff --git a/arch/mn10300/lib/__lshrdi3.S b/arch/mn10300/lib/__lshrdi3.S deleted file mode 100644 index a686aef31e90..000000000000 --- a/arch/mn10300/lib/__lshrdi3.S +++ /dev/null @@ -1,52 +0,0 @@ -/* MN10300 64-bit logical right shift - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include - - .text - .balign L1_CACHE_BYTES - -############################################################################### -# -# unsigned long long __lshrdi3(unsigned long long value [D1:D0], -# unsigned by [(12,SP)]) -# -############################################################################### - .globl __lshrdi3 - .type __lshrdi3,@function -__lshrdi3: - mov (12,sp),a0 - and +63,a0 - beq __lshrdi3_zero - - cmp +31,a0 - bhi __lshrdi3_32plus - - # the count is in the range 1-31 - lsr a0,d0 - - mov +32,a1 - sub a0,a1,a1 # a1 = 32 - count - asl a1,d1,a1 # get underflow from MSW -> LSW - - or_lsr a1,d0,a0,d1 # insert underflow into LSW and - # shift the MSW - rets - - .balign L1_CACHE_BYTES - # the count is in the range 32-63 -__lshrdi3_32plus: - lsr a0,d1,d0 - clr d1 -__lshrdi3_zero: - rets - - .size __lshrdi3, .-__lshrdi3 diff --git a/arch/mn10300/lib/__ucmpdi2.S b/arch/mn10300/lib/__ucmpdi2.S deleted file mode 100644 index 60dcbdfe386c..000000000000 --- a/arch/mn10300/lib/__ucmpdi2.S +++ /dev/null @@ -1,43 +0,0 @@ -/* __ucmpdi2.S: 64-bit unsigned compare - * - * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# int __ucmpdi2(unsigned long long a [D0:D1], -# unsigned long long b [(SP,12),(SP,16)]) -# -# - returns 0, 1, or 2 as a <, =, > b respectively. -# -############################################################################### - .globl __ucmpdi2 - .type __ucmpdi2,@function -__ucmpdi2: - mov (12,sp),a0 # b.lsw - mov (16,sp),a1 # b.msw - - sub a0,d0 - subc a1,d1 # may clear Z, never sets it - bne __ucmpdi2_differ # a.msw != b.msw - mov +1,d0 - rets - -__ucmpdi2_differ: - # C flag is set if LE, clear if GE - subc d0,d0 # -1 if LE, 0 if GE - add +1,d0 # 0 if LE, 1 if GE - add d0,d0 # 0 if LE, 2 if GE - rets - - .size __ucmpdi2, .-__ucmpdi2 diff --git a/arch/mn10300/lib/ashrdi3.c b/arch/mn10300/lib/ashrdi3.c deleted file mode 100644 index c54f61ddf0b5..000000000000 --- a/arch/mn10300/lib/ashrdi3.c +++ /dev/null @@ -1,61 +0,0 @@ -/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */ -/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public Licence as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public Licence for more details. - -You should have received a copy of the GNU General Public Licence -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -#define BITS_PER_UNIT 8 - -typedef int SItype __attribute__((mode(SI))); -typedef unsigned int USItype __attribute__((mode(SI))); -typedef int DItype __attribute__((mode(DI))); -typedef int word_type __attribute__((mode(__word__))); - -struct DIstruct { - SItype low; - SItype high; -}; - -union DIunion { - struct DIstruct s; - DItype ll; -}; - -DItype __ashrdi3(DItype u, word_type b) -{ - union DIunion w; - union DIunion uu; - word_type bm; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof(SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) { - /* w.s.high = 1..1 or 0..0 */ - w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1); - w.s.low = uu.s.high >> -bm; - } else { - USItype carries = (USItype)uu.s.high << bm; - w.s.high = uu.s.high >> b; - w.s.low = ((USItype)uu.s.low >> b) | carries; - } - - return w.ll; -} diff --git a/arch/mn10300/lib/bitops.c b/arch/mn10300/lib/bitops.c deleted file mode 100644 index 37309cdb7584..000000000000 --- a/arch/mn10300/lib/bitops.c +++ /dev/null @@ -1,50 +0,0 @@ -/* MN10300 Non-trivial bit operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include - -/* - * try flipping a bit using BSET and BCLR - */ -void change_bit(unsigned long nr, volatile void *addr) -{ - if (test_bit(nr, addr)) - goto try_clear_bit; - -try_set_bit: - if (!test_and_set_bit(nr, addr)) - return; - -try_clear_bit: - if (test_and_clear_bit(nr, addr)) - return; - - goto try_set_bit; -} - -/* - * try flipping a bit using BSET and BCLR and returning the old value - */ -int test_and_change_bit(unsigned long nr, volatile void *addr) -{ - if (test_bit(nr, addr)) - goto try_clear_bit; - -try_set_bit: - if (!test_and_set_bit(nr, addr)) - return 0; - -try_clear_bit: - if (test_and_clear_bit(nr, addr)) - return 1; - - goto try_set_bit; -} diff --git a/arch/mn10300/lib/checksum.c b/arch/mn10300/lib/checksum.c deleted file mode 100644 index 0f569151ef11..000000000000 --- a/arch/mn10300/lib/checksum.c +++ /dev/null @@ -1,100 +0,0 @@ -/* MN10300 Optimised checksumming wrappers - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include "internal.h" - -static inline unsigned short from32to16(__wsum sum) -{ - asm(" add %1,%0 \n" - " addc 0xffff,%0 \n" - : "=r" (sum) - : "r" (sum << 16), "0" (sum & 0xffff0000) - : "cc" - ); - return sum >> 16; -} - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - return ~do_csum(iph, ihl * 4); -} -EXPORT_SYMBOL(ip_fast_csum); - -__wsum csum_partial(const void *buff, int len, __wsum sum) -{ - __wsum result; - - result = do_csum(buff, len); - result += sum; - if (sum > result) - result++; - return result; -} -EXPORT_SYMBOL(csum_partial); - -__sum16 ip_compute_csum(const void *buff, int len) -{ - return ~from32to16(do_csum(buff, len)); -} -EXPORT_SYMBOL(ip_compute_csum); - -__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum) -{ - copy_from_user(dst, src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy); - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum) -{ - sum = csum_partial(src, len, sum); - memcpy(dst, src, len); - return sum; -} -EXPORT_SYMBOL(csum_partial_copy_nocheck); - -__wsum csum_partial_copy_from_user(const void *src, void *dst, - int len, __wsum sum, - int *err_ptr) -{ - int missing; - - missing = copy_from_user(dst, src, len); - if (missing) { - memset(dst + len - missing, 0, missing); - *err_ptr = -EFAULT; - } - - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy_from_user); - -__wsum csum_and_copy_to_user(const void *src, void *dst, - int len, __wsum sum, - int *err_ptr) -{ - int missing; - - missing = copy_to_user(dst, src, len); - if (missing) { - memset(dst + len - missing, 0, missing); - *err_ptr = -EFAULT; - } - - return csum_partial(src, len, sum); -} -EXPORT_SYMBOL(csum_and_copy_to_user); diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c deleted file mode 100644 index 8e7ceb8ba33d..000000000000 --- a/arch/mn10300/lib/delay.c +++ /dev/null @@ -1,51 +0,0 @@ -/* MN10300 Short delay interpolation routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include - -/* - * basic delay loop - */ -void __delay(unsigned long loops) -{ - int d0; - - asm volatile( - " bra 1f \n" - " .align 4 \n" - "1: bra 2f \n" - " .align 4 \n" - "2: add -1,%0 \n" - " bne 2b \n" - : "=&d" (d0) - : "0" (loops) - : "cc"); -} -EXPORT_SYMBOL(__delay); - -/* - * handle a delay specified in terms of microseconds - */ -void __udelay(unsigned long usecs) -{ - unsigned long start, stop, cnt; - - /* usecs * CLK / 1E6 */ - stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000); - start = TMTSCBC; - - do { - cnt = start - TMTSCBC; - } while (cnt < stop); -} -EXPORT_SYMBOL(__udelay); diff --git a/arch/mn10300/lib/do_csum.S b/arch/mn10300/lib/do_csum.S deleted file mode 100644 index 1d27bba0cd8f..000000000000 --- a/arch/mn10300/lib/do_csum.S +++ /dev/null @@ -1,157 +0,0 @@ -/* Optimised simple memory checksum - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include - - .section .text - .balign L1_CACHE_BYTES - -############################################################################### -# -# unsigned int do_csum(const unsigned char *buff, int len) -# -############################################################################### - .globl do_csum - .type do_csum,@function -do_csum: - movm [d2,d3],(sp) - mov d1,d2 # count - mov d0,a0 # buff - mov a0,a1 - clr d1 # accumulator - - cmp +0,d2 - ble do_csum_done # check for zero length or negative - - # 4-byte align the buffer pointer - btst +3,a0 - beq do_csum_now_4b_aligned - - btst +1,a0 - beq do_csum_addr_not_odd - movbu (a0),d0 - inc a0 - asl +8,d0 - add d0,d1 - add -1,d2 - -do_csum_addr_not_odd: - cmp +2,d2 - bcs do_csum_fewer_than_4 - btst +2,a0 - beq do_csum_now_4b_aligned - movhu (a0+),d0 - add d0,d1 - add -2,d2 - cmp +4,d2 - bcs do_csum_fewer_than_4 - -do_csum_now_4b_aligned: - # we want to checksum as much as we can in chunks of 32 bytes - cmp +31,d2 - bls do_csum_remainder # 4-byte aligned remainder - - add -32,d2 - mov +32,d3 - -do_csum_loop: - mov (a0+),d0 - mov (a0+),e0 - mov (a0+),e1 - mov (a0+),e3 - add d0,d1 - addc e0,d1 - addc e1,d1 - addc e3,d1 - mov (a0+),d0 - mov (a0+),e0 - mov (a0+),e1 - mov (a0+),e3 - addc d0,d1 - addc e0,d1 - addc e1,d1 - addc e3,d1 - addc +0,d1 - - sub d3,d2 - bcc do_csum_loop - - add d3,d2 - beq do_csum_done - -do_csum_remainder: - # cut 16-31 bytes down to 0-15 - cmp +16,d2 - bcs do_csum_fewer_than_16 - mov (a0+),d0 - mov (a0+),e0 - mov (a0+),e1 - mov (a0+),e3 - add d0,d1 - addc e0,d1 - addc e1,d1 - addc e3,d1 - addc +0,d1 - add -16,d2 - beq do_csum_done - -do_csum_fewer_than_16: - # copy the remaining whole words - cmp +4,d2 - bcs do_csum_fewer_than_4 - cmp +8,d2 - bcs do_csum_one_word - cmp +12,d2 - bcs do_csum_two_words - mov (a0+),d0 - add d0,d1 - addc +0,d1 -do_csum_two_words: - mov (a0+),d0 - add d0,d1 - addc +0,d1 -do_csum_one_word: - mov (a0+),d0 - add d0,d1 - addc +0,d1 - -do_csum_fewer_than_4: - and +3,d2 - beq do_csum_done - xor_cmp d0,d0,+2,d2 - bcs do_csum_fewer_than_2 - movhu (a0+),d0 - and +1,d2 - beq do_csum_add_last_bit -do_csum_fewer_than_2: - movbu (a0),d3 - add d3,d0 -do_csum_add_last_bit: - add d0,d1 - addc +0,d1 - -do_csum_done: - # compress the checksum down to 16 bits - mov +0xffff0000,d0 - and d1,d0 - asl +16,d1 - add d1,d0 - addc +0xffff,d0 - lsr +16,d0 - - # flip the halves of the word result if the buffer was oddly aligned - and +1,a1 - beq do_csum_not_oddly_aligned - swaph d0,d0 # exchange bits 15:8 with 7:0 - -do_csum_not_oddly_aligned: - ret [d2,d3],8 - - .size do_csum, .-do_csum diff --git a/arch/mn10300/lib/internal.h b/arch/mn10300/lib/internal.h deleted file mode 100644 index 0014eee5f04f..000000000000 --- a/arch/mn10300/lib/internal.h +++ /dev/null @@ -1,15 +0,0 @@ -/* Internal definitions for the arch part of the kernel library - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -/* - * do_csum.S - */ -extern unsigned int do_csum(const unsigned char *, size_t); diff --git a/arch/mn10300/lib/lshrdi3.c b/arch/mn10300/lib/lshrdi3.c deleted file mode 100644 index e05e64e9ce96..000000000000 --- a/arch/mn10300/lib/lshrdi3.c +++ /dev/null @@ -1,60 +0,0 @@ -/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */ -/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public Licence as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public Licence for more details. - -You should have received a copy of the GNU General Public Licence -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -#define BITS_PER_UNIT 8 - -typedef int SItype __attribute__((mode(SI))); -typedef unsigned int USItype __attribute__((mode(SI))); -typedef int DItype __attribute__((mode(DI))); -typedef int word_type __attribute__((mode(__word__))); - -struct DIstruct { - SItype low; - SItype high; -}; - -union DIunion { - struct DIstruct s; - DItype ll; -}; - -DItype __lshrdi3(DItype u, word_type b) -{ - union DIunion w; - word_type bm; - union DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof(SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) { - w.s.high = 0; - w.s.low = (USItype) uu.s.high >> -bm; - } else { - USItype carries = (USItype) uu.s.high << bm; - w.s.high = (USItype) uu.s.high >> b; - w.s.low = ((USItype) uu.s.low >> b) | carries; - } - - return w.ll; -} diff --git a/arch/mn10300/lib/memcpy.S b/arch/mn10300/lib/memcpy.S deleted file mode 100644 index 25fb9bb2604f..000000000000 --- a/arch/mn10300/lib/memcpy.S +++ /dev/null @@ -1,135 +0,0 @@ -/* MN10300 Optimised simple memory to memory copy - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include - - .section .text - .balign L1_CACHE_BYTES - -############################################################################### -# -# void *memcpy(void *dst, const void *src, size_t n) -# -############################################################################### - .globl memcpy - .type memcpy,@function -memcpy: - movm [d2,d3],(sp) - mov d0,(12,sp) - mov d1,(16,sp) - mov (20,sp),d2 # count - mov d0,a0 # dst - mov d1,a1 # src - mov d0,e3 # the return value - - cmp +0,d2 - beq memcpy_done # return if zero-length copy - - # see if the three parameters are all four-byte aligned - or d0,d1,d3 - or d2,d3 - and +3,d3 - bne memcpy_1 # jump if not - - # we want to transfer as much as we can in chunks of 32 bytes - cmp +31,d2 - bls memcpy_4_remainder # 4-byte aligned remainder - - movm [exreg1],(sp) - add -32,d2 - mov +32,d3 - -memcpy_4_loop: - mov (a1+),d0 - mov (a1+),d1 - mov (a1+),e0 - mov (a1+),e1 - mov (a1+),e4 - mov (a1+),e5 - mov (a1+),e6 - mov (a1+),e7 - mov d0,(a0+) - mov d1,(a0+) - mov e0,(a0+) - mov e1,(a0+) - mov e4,(a0+) - mov e5,(a0+) - mov e6,(a0+) - mov e7,(a0+) - - sub d3,d2 - bcc memcpy_4_loop - - movm (sp),[exreg1] - add d3,d2 - beq memcpy_4_no_remainder - -memcpy_4_remainder: - # cut 4-7 words down to 0-3 - cmp +16,d2 - bcs memcpy_4_three_or_fewer_words - mov (a1+),d0 - mov (a1+),d1 - mov (a1+),e0 - mov (a1+),e1 - mov d0,(a0+) - mov d1,(a0+) - mov e0,(a0+) - mov e1,(a0+) - add -16,d2 - beq memcpy_4_no_remainder - - # copy the remaining 1, 2 or 3 words -memcpy_4_three_or_fewer_words: - cmp +8,d2 - bcs memcpy_4_one_word - beq memcpy_4_two_words - mov (a1+),d0 - mov d0,(a0+) -memcpy_4_two_words: - mov (a1+),d0 - mov d0,(a0+) -memcpy_4_one_word: - mov (a1+),d0 - mov d0,(a0+) - -memcpy_4_no_remainder: - # check we copied the correct amount - # TODO: REMOVE CHECK - sub e3,a0,d2 - mov (20,sp),d1 - cmp d2,d1 - beq memcpy_done - break - break - break - -memcpy_done: - mov e3,a0 - ret [d2,d3],8 - - # handle misaligned copying -memcpy_1: - add -1,d2 - mov +1,d3 - setlb # setlb requires the next insns - # to occupy exactly 4 bytes - - sub d3,d2 - movbu (a1),d0 - movbu d0,(a0) - add_add d3,a1,d3,a0 - lcc - - mov e3,a0 - ret [d2,d3],8 - -memcpy_end: - .size memcpy, memcpy_end-memcpy diff --git a/arch/mn10300/lib/memmove.S b/arch/mn10300/lib/memmove.S deleted file mode 100644 index 20b07b62b77c..000000000000 --- a/arch/mn10300/lib/memmove.S +++ /dev/null @@ -1,160 +0,0 @@ -/* MN10300 Optimised simple memory to memory copy, with support for overlapping - * regions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include - - .section .text - .balign L1_CACHE_BYTES - -############################################################################### -# -# void *memmove(void *dst, const void *src, size_t n) -# -############################################################################### - .globl memmove - .type memmove,@function -memmove: - # fall back to memcpy if dst < src to work bottom up - cmp d1,d0 - bcs memmove_memcpy - - # work top down - movm [d2,d3],(sp) - mov d0,(12,sp) - mov d1,(16,sp) - mov (20,sp),d2 # count - add d0,d2,a0 # dst end - add d1,d2,a1 # src end - mov d0,e3 # the return value - - cmp +0,d2 - beq memmove_done # return if zero-length copy - - # see if the three parameters are all four-byte aligned - or d0,d1,d3 - or d2,d3 - and +3,d3 - bne memmove_1 # jump if not - - # we want to transfer as much as we can in chunks of 32 bytes - add -4,a1 - cmp +31,d2 - bls memmove_4_remainder # 4-byte aligned remainder - - add -32,d2 - mov +32,d3 - -memmove_4_loop: - mov (a1),d0 - sub_sub +4,a1,+4,a0 - mov d0,(a0) - mov (a1),d1 - sub_sub +4,a1,+4,a0 - mov d1,(a0) - - mov (a1),d0 - sub_sub +4,a1,+4,a0 - mov d0,(a0) - mov (a1),d1 - sub_sub +4,a1,+4,a0 - mov d1,(a0) - - mov (a1),d0 - sub_sub +4,a1,+4,a0 - mov d0,(a0) - mov (a1),d1 - sub_sub +4,a1,+4,a0 - mov d1,(a0) - - mov (a1),d0 - sub_sub +4,a1,+4,a0 - mov d0,(a0) - mov (a1),d1 - sub_sub +4,a1,+4,a0 - mov d1,(a0) - - sub d3,d2 - bcc memmove_4_loop - - add d3,d2 - beq memmove_4_no_remainder - -memmove_4_remainder: - # cut 4-7 words down to 0-3 - cmp +16,d2 - bcs memmove_4_three_or_fewer_words - mov (a1),d0 - sub_sub +4,a1,+4,a0 - mov d0,(a0) - mov (a1),d1 - sub_sub +4,a1,+4,a0 - mov d1,(a0) - mov (a1),e0 - sub_sub +4,a1,+4,a0 - mov e0,(a0) - mov (a1),e1 - sub_sub +4,a1,+4,a0 - mov e1,(a0) - add -16,d2 - beq memmove_4_no_remainder - - # copy the remaining 1, 2 or 3 words -memmove_4_three_or_fewer_words: - cmp +8,d2 - bcs memmove_4_one_word - beq memmove_4_two_words - mov (a1),d0 - sub_sub +4,a1,+4,a0 - mov d0,(a0) -memmove_4_two_words: - mov (a1),d0 - sub_sub +4,a1,+4,a0 - mov d0,(a0) -memmove_4_one_word: - mov (a1),d0 - sub_sub +4,a1,+4,a0 - mov d0,(a0) - -memmove_4_no_remainder: - # check we copied the correct amount - # TODO: REMOVE CHECK - sub e3,a0,d2 - beq memmove_done - break - break - break - -memmove_done: - mov e3,a0 - ret [d2,d3],8 - - # handle misaligned copying -memmove_1: - add -1,a1 - add -1,d2 - mov +1,d3 - setlb # setlb requires the next insns - # to occupy exactly 4 bytes - - sub d3,d2 - movbu (a1),d0 - sub_sub d3,a1,d3,a0 - movbu d0,(a0) - lcc - - mov e3,a0 - ret [d2,d3],8 - -memmove_memcpy: - jmp memcpy - -memmove_end: - .size memmove, memmove_end-memmove diff --git a/arch/mn10300/lib/memset.S b/arch/mn10300/lib/memset.S deleted file mode 100644 index bc02e39629b7..000000000000 --- a/arch/mn10300/lib/memset.S +++ /dev/null @@ -1,121 +0,0 @@ -/* Optimised simple memory fill - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include - - .section .text - .balign L1_CACHE_BYTES - -############################################################################### -# -# void *memset(void *dst, int c, size_t n) -# -############################################################################### - .globl memset - .type memset,@function -memset: - movm [d2,d3],(sp) - mov d0,(12,sp) - mov d1,(16,sp) - mov (20,sp),d2 # count - mov d0,a0 # dst - mov d0,e3 # the return value - - cmp +0,d2 - beq memset_done # return if zero-length fill - - # see if the region parameters are four-byte aligned - or d0,d2,d3 - and +3,d3 - bne memset_1 # jump if not - - extbu d1 - mov_asl d1,d3,8,d1 - or_asl d1,d3,8,d1 - or_asl d1,d3,8,d1 - or d3,d1 - - # we want to transfer as much as we can in chunks of 32 bytes - cmp +31,d2 - bls memset_4_remainder # 4-byte aligned remainder - - add -32,d2 - mov +32,d3 - -memset_4_loop: - mov d1,(a0+) - mov d1,(a0+) - mov d1,(a0+) - mov d1,(a0+) - mov d1,(a0+) - mov d1,(a0+) - mov d1,(a0+) - mov d1,(a0+) - - sub d3,d2 - bcc memset_4_loop - - add d3,d2 - beq memset_4_no_remainder - -memset_4_remainder: - # cut 4-7 words down to 0-3 - cmp +16,d2 - bcs memset_4_three_or_fewer_words - mov d1,(a0+) - mov d1,(a0+) - mov d1,(a0+) - mov d1,(a0+) - add -16,d2 - beq memset_4_no_remainder - - # copy the remaining 1, 2 or 3 words -memset_4_three_or_fewer_words: - cmp +8,d2 - bcs memset_4_one_word - beq memset_4_two_words - mov d1,(a0+) -memset_4_two_words: - mov d1,(a0+) -memset_4_one_word: - mov d1,(a0+) - -memset_4_no_remainder: - # check we set the correct amount - # TODO: REMOVE CHECK - sub e3,a0,d2 - mov (20,sp),d1 - cmp d2,d1 - beq memset_done - break - break - break - -memset_done: - mov e3,a0 - ret [d2,d3],8 - - # handle misaligned copying -memset_1: - add -1,d2 - mov +1,d3 - setlb # setlb requires the next insns - # to occupy exactly 4 bytes - - sub d3,d2 - movbu d1,(a0) - inc a0 - lcc - - mov e3,a0 - ret [d2,d3],8 - -memset_end: - .size memset, memset_end-memset diff --git a/arch/mn10300/lib/negdi2.c b/arch/mn10300/lib/negdi2.c deleted file mode 100644 index eae4ecdd5f69..000000000000 --- a/arch/mn10300/lib/negdi2.c +++ /dev/null @@ -1,57 +0,0 @@ -/* More subroutines needed by GCC output code on some machines. */ -/* Compile this one with gcc. */ -/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, - 2000, 2001 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public Licence as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -In addition to the permissions in the GNU General Public Licence, the -Free Software Foundation gives you unlimited permission to link the -compiled version of this file into combinations with other programs, -and to distribute those combinations without any restriction coming -from the use of this file. (The General Public Licence restrictions -do apply in other respects; for example, they cover modification of -the file, and distribution when not linked into a combine -executable.) - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public Licence for more details. - -You should have received a copy of the GNU General Public Licence -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -/* It is incorrect to include config.h here, because this file is being - compiled for the target, and hence definitions concerning only the host - do not apply. */ - -#include - -union DWunion { - s64 ll; - struct { - s32 low; - s32 high; - } s; -}; - -s64 __negdi2(s64 u) -{ - union DWunion w; - union DWunion uu; - - uu.ll = u; - - w.s.low = -uu.s.low; - w.s.high = -uu.s.high - ((u32) w.s.low > 0); - - return w.ll; -} diff --git a/arch/mn10300/lib/usercopy.c b/arch/mn10300/lib/usercopy.c deleted file mode 100644 index 39626912de98..000000000000 --- a/arch/mn10300/lib/usercopy.c +++ /dev/null @@ -1,142 +0,0 @@ -/* MN10300 Userspace accessor functions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include - -/* - * Copy a null terminated string from userspace. - */ -#define __do_strncpy_from_user(dst, src, count, res) \ -do { \ - int w; \ - asm volatile( \ - " mov %1,%0\n" \ - " cmp 0,%1\n" \ - " beq 2f\n" \ - "0:\n" \ - " movbu (%5),%2\n" \ - "1:\n" \ - " movbu %2,(%6)\n" \ - " inc %5\n" \ - " inc %6\n" \ - " cmp 0,%2\n" \ - " beq 2f\n" \ - " add -1,%1\n" \ - " bne 0b\n" \ - "2:\n" \ - " sub %1,%0\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - "4:\n" \ - " mov %3,%0\n" \ - " jmp 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,4b\n" \ - " .long 1b,4b\n" \ - " .previous" \ - :"=&r"(res), "=r"(count), "=&r"(w) \ - :"i"(-EFAULT), "1"(count), "a"(src), "a"(dst) \ - : "memory", "cc"); \ -} while (0) - -long -strncpy_from_user(char *dst, const char *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - __do_strncpy_from_user(dst, src, count, res); - return res; -} - - -/* - * Clear a userspace memory - */ -#define __do_clear_user(addr, size) \ -do { \ - int w; \ - asm volatile( \ - " cmp 0,%0\n" \ - " beq 1f\n" \ - " clr %1\n" \ - "0: movbu %1,(%3,%2)\n" \ - " inc %3\n" \ - " cmp %0,%3\n" \ - " bne 0b\n" \ - "1:\n" \ - " sub %3,%0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - ".previous\n" \ - : "+r"(size), "=&r"(w) \ - : "a"(addr), "d"(0) \ - : "memory", "cc"); \ -} while (0) - -unsigned long -__clear_user(void *to, unsigned long n) -{ - __do_clear_user(to, n); - return n; -} - -unsigned long -clear_user(void *to, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - __do_clear_user(to, n); - return n; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 on exception, a value greater than N if too long - */ -long strnlen_user(const char *s, long n) -{ - unsigned long res, w; - - if (!__addr_ok(s)) - return 0; - - if (n < 0 || n + (u_long) s > current_thread_info()->addr_limit.seg) - n = current_thread_info()->addr_limit.seg - (u_long)s; - - asm volatile( - "0: cmp %4,%0\n" - " beq 2f\n" - "1: movbu (%0,%3),%1\n" - " inc %0\n" - " cmp 0,%1\n" - " beq 3f\n" - " bra 0b\n" - "2: clr %0\n" - "3:\n" - ".section .fixup,\"ax\"\n" - "4: jmp 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 1b,4b\n" - ".previous\n" - :"=d"(res), "=&r"(w) - :"0"(0), "a"(s), "r"(n) - : "memory", "cc"); - return res; -} diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache deleted file mode 100644 index 8cc5d9ec3b6c..000000000000 --- a/arch/mn10300/mm/Kconfig.cache +++ /dev/null @@ -1,148 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# MN10300 CPU cache options -# - -choice - prompt "CPU Caching mode" - default MN10300_CACHE_WBACK - help - This option determines the caching mode for the kernel. - - Write-Back caching mode involves the all reads and writes causing - the affected cacheline to be read into the cache first before being - operated upon. Memory is not then updated by a write until the cache - is filled and a cacheline needs to be displaced from the cache to - make room. Only at that point is it written back. - - Write-Through caching only fetches cachelines from memory on a - read. Writes always get written directly to memory. If the affected - cacheline is also in cache, it will be updated too. - - The final option is to turn of caching entirely. - -config MN10300_CACHE_WBACK - bool "Write-Back" - help - The dcache operates in delayed write-back mode. It must be manually - flushed if writes are made that subsequently need to be executed or - to be DMA'd by a device. - -config MN10300_CACHE_WTHRU - bool "Write-Through" - help - The dcache operates in immediate write-through mode. Writes are - committed to RAM immediately in addition to being stored in the - cache. This means that the written data is immediately available for - execution or DMA. - - This is not available for use with an SMP kernel if cache flushing - and invalidation by automatic purge register is not selected. - -config MN10300_CACHE_DISABLED - bool "Disabled" - help - The icache and dcache are disabled. - -endchoice - -config MN10300_CACHE_ENABLED - def_bool y if !MN10300_CACHE_DISABLED - - -choice - prompt "CPU cache flush/invalidate method" - default MN10300_CACHE_MANAGE_BY_TAG if !AM34_2 - default MN10300_CACHE_MANAGE_BY_REG if AM34_2 - depends on MN10300_CACHE_ENABLED - help - This determines the method by which CPU cache flushing and - invalidation is performed. - -config MN10300_CACHE_MANAGE_BY_TAG - bool "Use the cache tag registers directly" - depends on !(SMP && MN10300_CACHE_WTHRU) - -config MN10300_CACHE_MANAGE_BY_REG - bool "Flush areas by way of automatic purge registers (AM34 only)" - depends on AM34_2 - -endchoice - -config MN10300_CACHE_INV_BY_TAG - def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_ENABLED - -config MN10300_CACHE_INV_BY_REG - def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_ENABLED - -config MN10300_CACHE_FLUSH_BY_TAG - def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_WBACK - -config MN10300_CACHE_FLUSH_BY_REG - def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_WBACK - - -config MN10300_HAS_CACHE_SNOOP - def_bool n - -config MN10300_CACHE_SNOOP - bool "Use CPU Cache Snooping" - depends on MN10300_CACHE_ENABLED && MN10300_HAS_CACHE_SNOOP - default y - -config MN10300_CACHE_FLUSH_ICACHE - def_bool y if MN10300_CACHE_WBACK && !MN10300_CACHE_SNOOP - help - Set if we need the dcache flushing before the icache is invalidated. - -config MN10300_CACHE_INV_ICACHE - def_bool y if MN10300_CACHE_WTHRU && !MN10300_CACHE_SNOOP - help - Set if we need the icache to be invalidated, even if the dcache is in - write-through mode and doesn't need flushing. - -# -# The kernel debugger gets its own separate cache flushing functions -# -config MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG - def_bool y if KERNEL_DEBUGGER && \ - MN10300_CACHE_WBACK && \ - !MN10300_CACHE_SNOOP && \ - MN10300_CACHE_MANAGE_BY_TAG - help - Set if the debugger needs to flush the dcache and invalidate the - icache using the cache tag registers to make breakpoints work. - -config MN10300_DEBUGGER_CACHE_FLUSH_BY_REG - def_bool y if KERNEL_DEBUGGER && \ - MN10300_CACHE_WBACK && \ - !MN10300_CACHE_SNOOP && \ - MN10300_CACHE_MANAGE_BY_REG - help - Set if the debugger needs to flush the dcache and invalidate the - icache using automatic purge registers to make breakpoints work. - -config MN10300_DEBUGGER_CACHE_INV_BY_TAG - def_bool y if KERNEL_DEBUGGER && \ - MN10300_CACHE_WTHRU && \ - !MN10300_CACHE_SNOOP && \ - MN10300_CACHE_MANAGE_BY_TAG - help - Set if the debugger needs to invalidate the icache using the cache - tag registers to make breakpoints work. - -config MN10300_DEBUGGER_CACHE_INV_BY_REG - def_bool y if KERNEL_DEBUGGER && \ - MN10300_CACHE_WTHRU && \ - !MN10300_CACHE_SNOOP && \ - MN10300_CACHE_MANAGE_BY_REG - help - Set if the debugger needs to invalidate the icache using automatic - purge registers to make breakpoints work. - -config MN10300_DEBUGGER_CACHE_NO_FLUSH - def_bool y if KERNEL_DEBUGGER && \ - (MN10300_CACHE_DISABLED || MN10300_CACHE_SNOOP) - help - Set if the debugger does not need to flush the dcache and/or - invalidate the icache to make breakpoints work. diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile deleted file mode 100644 index 048ba6f67f9a..000000000000 --- a/arch/mn10300/mm/Makefile +++ /dev/null @@ -1,32 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the MN10300-specific memory management code -# - -cache-smp-wback-$(CONFIG_MN10300_CACHE_WBACK) := cache-smp-flush.o - -cacheflush-y := cache.o -cacheflush-$(CONFIG_SMP) += cache-smp.o cache-smp-inv.o $(cache-smp-wback-y) -cacheflush-$(CONFIG_MN10300_CACHE_INV_ICACHE) += cache-inv-icache.o -cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_ICACHE) += cache-flush-icache.o -cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o -cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o -cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o -cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_REG) += cache-flush-by-reg.o - -cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG) += \ - cache-dbg-flush-by-tag.o cache-dbg-inv-by-tag.o -cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_REG) += \ - cache-dbg-flush-by-reg.o -cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG) += \ - cache-dbg-inv-by-tag.o cache-dbg-inv.o -cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_REG) += \ - cache-dbg-inv-by-reg.o cache-dbg-inv.o - -cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o - -obj-y := \ - init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \ - misalignment.o dma-alloc.o $(cacheflush-y) - -obj-$(CONFIG_SMP) += tlb-smp.o diff --git a/arch/mn10300/mm/cache-dbg-flush-by-reg.S b/arch/mn10300/mm/cache-dbg-flush-by-reg.S deleted file mode 100644 index a775ea5d7cee..000000000000 --- a/arch/mn10300/mm/cache-dbg-flush-by-reg.S +++ /dev/null @@ -1,160 +0,0 @@ -/* MN10300 CPU cache invalidation routines, using automatic purge registers - * - * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include "cache.inc" - - .am33_2 - -############################################################################### -# -# void debugger_local_cache_flushinv(void) -# Flush the entire data cache back to RAM and invalidate the icache -# -############################################################################### - ALIGN - .globl debugger_local_cache_flushinv - .type debugger_local_cache_flushinv,@function -debugger_local_cache_flushinv: - # - # firstly flush the dcache - # - movhu (CHCTR),d0 - btst CHCTR_DCEN|CHCTR_ICEN,d0 - beq debugger_local_cache_flushinv_end - - mov DCPGCR,a0 - - mov epsw,d1 - and ~EPSW_IE,epsw - or EPSW_NMID,epsw - nop - - btst CHCTR_DCEN,d0 - beq debugger_local_cache_flushinv_no_dcache - - # wait for busy bit of area purge - setlb - mov (a0),d0 - btst DCPGCR_DCPGBSY,d0 - lne - - # set mask - clr d0 - mov d0,(DCPGMR) - - # area purge - # - # DCPGCR = DCPGCR_DCP - # - mov DCPGCR_DCP,d0 - mov d0,(a0) - - # wait for busy bit of area purge - setlb - mov (a0),d0 - btst DCPGCR_DCPGBSY,d0 - lne - -debugger_local_cache_flushinv_no_dcache: - # - # secondly, invalidate the icache if it is enabled - # - mov CHCTR,a0 - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq debugger_local_cache_flushinv_done - - invalidate_icache 0 - -debugger_local_cache_flushinv_done: - mov d1,epsw - -debugger_local_cache_flushinv_end: - ret [],0 - .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv - -############################################################################### -# -# void debugger_local_cache_flushinv_one(u8 *addr) -# -# Invalidate one particular cacheline if it's in the icache -# -############################################################################### - ALIGN - .globl debugger_local_cache_flushinv_one - .type debugger_local_cache_flushinv_one,@function -debugger_local_cache_flushinv_one: - movhu (CHCTR),d1 - btst CHCTR_DCEN|CHCTR_ICEN,d1 - beq debugger_local_cache_flushinv_one_end - btst CHCTR_DCEN,d1 - beq debugger_local_cache_flushinv_one_no_dcache - - # round cacheline addr down - and L1_CACHE_TAG_MASK,d0 - mov d0,a1 - mov d0,d1 - - # determine the dcache purge control reg address - mov DCACHE_PURGE(0,0),a0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 - - # retain valid entries in the cache - or L1_CACHE_TAG_VALID,d1 - - # conditionally purge this line in all ways - mov d1,(L1_CACHE_WAYDISP*0,a0) - -debugger_local_cache_flushinv_one_no_dcache: - # - # now try to flush the icache - # - mov CHCTR,a0 - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq debugger_local_cache_flushinv_one_end - - LOCAL_CLI_SAVE(d1) - - mov ICIVCR,a0 - - # wait for the invalidator to quiesce - setlb - mov (a0),d0 - btst ICIVCR_ICIVBSY,d0 - lne - - # set the mask - mov L1_CACHE_TAG_MASK,d0 - mov d0,(ICIVMR) - - # invalidate the cache line at the given address - or ICIVCR_ICI,a1 - mov a1,(a0) - - # wait for the invalidator to quiesce again - setlb - mov (a0),d0 - btst ICIVCR_ICIVBSY,d0 - lne - - LOCAL_IRQ_RESTORE(d1) - -debugger_local_cache_flushinv_one_end: - ret [],0 - .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one diff --git a/arch/mn10300/mm/cache-dbg-flush-by-tag.S b/arch/mn10300/mm/cache-dbg-flush-by-tag.S deleted file mode 100644 index bf56930e6e70..000000000000 --- a/arch/mn10300/mm/cache-dbg-flush-by-tag.S +++ /dev/null @@ -1,114 +0,0 @@ -/* MN10300 CPU cache invalidation routines, using direct tag flushing - * - * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include "cache.inc" - - .am33_2 - -############################################################################### -# -# void debugger_local_cache_flushinv(void) -# -# Flush the entire data cache back to RAM and invalidate the icache -# -############################################################################### - ALIGN - .globl debugger_local_cache_flushinv - .type debugger_local_cache_flushinv,@function -debugger_local_cache_flushinv: - # - # firstly flush the dcache - # - movhu (CHCTR),d0 - btst CHCTR_DCEN|CHCTR_ICEN,d0 - beq debugger_local_cache_flushinv_end - - btst CHCTR_DCEN,d0 - beq debugger_local_cache_flushinv_no_dcache - - # read the addresses tagged in the cache's tag RAM and attempt to flush - # those addresses specifically - # - we rely on the hardware to filter out invalid tag entry addresses - mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address - mov DCACHE_PURGE(0,0),a1 # dcache purge request address - mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,e0 # total number of entries - -mn10300_local_dcache_flush_loop: - mov (a0),d0 - and L1_CACHE_TAG_MASK,d0 - or L1_CACHE_TAG_VALID,d0 # retain valid entries in the - # cache - mov d0,(a1) # conditional purge - - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - add -1,e0 - bne mn10300_local_dcache_flush_loop - -debugger_local_cache_flushinv_no_dcache: - # - # secondly, invalidate the icache if it is enabled - # - mov CHCTR,a0 - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq debugger_local_cache_flushinv_end - - invalidate_icache 1 - -debugger_local_cache_flushinv_end: - ret [],0 - .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv - -############################################################################### -# -# void debugger_local_cache_flushinv_one(u8 *addr) -# -# Invalidate one particular cacheline if it's in the icache -# -############################################################################### - ALIGN - .globl debugger_local_cache_flushinv_one - .type debugger_local_cache_flushinv_one,@function -debugger_local_cache_flushinv_one: - movhu (CHCTR),d1 - btst CHCTR_DCEN|CHCTR_ICEN,d1 - beq debugger_local_cache_flushinv_one_end - btst CHCTR_DCEN,d1 - beq debugger_local_cache_flushinv_one_icache - - # round cacheline addr down - and L1_CACHE_TAG_MASK,d0 - mov d0,a1 - - # determine the dcache purge control reg address - mov DCACHE_PURGE(0,0),a0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 - - # retain valid entries in the cache - or L1_CACHE_TAG_VALID,a1 - - # conditionally purge this line in all ways - mov a1,(L1_CACHE_WAYDISP*0,a0) - - # now go and do the icache - bra debugger_local_cache_flushinv_one_icache - -debugger_local_cache_flushinv_one_end: - ret [],0 - .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one diff --git a/arch/mn10300/mm/cache-dbg-inv-by-reg.S b/arch/mn10300/mm/cache-dbg-inv-by-reg.S deleted file mode 100644 index c4e6252941b1..000000000000 --- a/arch/mn10300/mm/cache-dbg-inv-by-reg.S +++ /dev/null @@ -1,69 +0,0 @@ -/* MN10300 CPU cache invalidation routines, using automatic purge registers - * - * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include "cache.inc" - - .am33_2 - - .globl debugger_local_cache_flushinv_one - -############################################################################### -# -# void debugger_local_cache_flushinv_one(u8 *addr) -# -# Invalidate one particular cacheline if it's in the icache -# -############################################################################### - ALIGN - .globl debugger_local_cache_flushinv_one - .type debugger_local_cache_flushinv_one,@function -debugger_local_cache_flushinv_one: - mov d0,a1 - - mov CHCTR,a0 - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq mn10300_local_icache_inv_range_reg_end - - LOCAL_CLI_SAVE(d1) - - mov ICIVCR,a0 - - # wait for the invalidator to quiesce - setlb - mov (a0),d0 - btst ICIVCR_ICIVBSY,d0 - lne - - # set the mask - mov ~L1_CACHE_TAG_MASK,d0 - mov d0,(ICIVMR) - - # invalidate the cache line at the given address - and ~L1_CACHE_TAG_MASK,a1 - or ICIVCR_ICI,a1 - mov a1,(a0) - - # wait for the invalidator to quiesce again - setlb - mov (a0),d0 - btst ICIVCR_ICIVBSY,d0 - lne - - LOCAL_IRQ_RESTORE(d1) - -mn10300_local_icache_inv_range_reg_end: - ret [],0 - .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one diff --git a/arch/mn10300/mm/cache-dbg-inv-by-tag.S b/arch/mn10300/mm/cache-dbg-inv-by-tag.S deleted file mode 100644 index d8ec821e5f88..000000000000 --- a/arch/mn10300/mm/cache-dbg-inv-by-tag.S +++ /dev/null @@ -1,120 +0,0 @@ -/* MN10300 CPU cache invalidation routines, using direct tag flushing - * - * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include "cache.inc" - - .am33_2 - - .globl debugger_local_cache_flushinv_one_icache - -############################################################################### -# -# void debugger_local_cache_flushinv_one(u8 *addr) -# -# Invalidate one particular cacheline if it's in the icache -# -############################################################################### - ALIGN - .globl debugger_local_cache_flushinv_one_icache - .type debugger_local_cache_flushinv_one_icache,@function -debugger_local_cache_flushinv_one_icache: - movm [d3,a2],(sp) - - mov CHCTR,a2 - movhu (a2),d0 - btst CHCTR_ICEN,d0 - beq debugger_local_cache_flushinv_one_icache_end - - mov d0,a1 - and L1_CACHE_TAG_MASK,a1 - - # read the tags from the tag RAM, and if they indicate a matching valid - # cache line then we invalidate that line - mov ICACHE_TAG(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting icache tag RAM - # access address - - and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base - or L1_CACHE_TAG_VALID,a1 - mov L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_VALID,d1 - - LOCAL_CLI_SAVE(d3) - - # disable the icache - movhu (a2),d0 - and ~CHCTR_ICEN,d0 - movhu d0,(a2) - - # and wait for it to calm down - setlb - movhu (a2),d0 - btst CHCTR_ICBUSY,d0 - lne - - # check all the way tags for this cache entry - mov (a0),d0 # read the tag in the way 0 slot - xor a1,d0 - and d1,d0 - beq debugger_local_icache_kill # jump if matched - - add L1_CACHE_WAYDISP,a0 - mov (a0),d0 # read the tag in the way 1 slot - xor a1,d0 - and d1,d0 - beq debugger_local_icache_kill # jump if matched - - add L1_CACHE_WAYDISP,a0 - mov (a0),d0 # read the tag in the way 2 slot - xor a1,d0 - and d1,d0 - beq debugger_local_icache_kill # jump if matched - - add L1_CACHE_WAYDISP,a0 - mov (a0),d0 # read the tag in the way 3 slot - xor a1,d0 - and d1,d0 - bne debugger_local_icache_finish # jump if not matched - -debugger_local_icache_kill: - mov d0,(a0) # kill the tag (D0 is 0 at this point) - -debugger_local_icache_finish: - # wait for the cache to finish what it's doing - setlb - movhu (a2),d0 - btst CHCTR_ICBUSY,d0 - lne - - # and reenable it - or CHCTR_ICEN,d0 - movhu d0,(a2) - movhu (a2),d0 - - # re-enable interrupts - LOCAL_IRQ_RESTORE(d3) - -debugger_local_cache_flushinv_one_icache_end: - ret [d3,a2],8 - .size debugger_local_cache_flushinv_one_icache,.-debugger_local_cache_flushinv_one_icache - -#ifdef CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG - .globl debugger_local_cache_flushinv_one - .type debugger_local_cache_flushinv_one,@function -debugger_local_cache_flushinv_one = debugger_local_cache_flushinv_one_icache -#endif diff --git a/arch/mn10300/mm/cache-dbg-inv.S b/arch/mn10300/mm/cache-dbg-inv.S deleted file mode 100644 index eba2d6dca066..000000000000 --- a/arch/mn10300/mm/cache-dbg-inv.S +++ /dev/null @@ -1,47 +0,0 @@ -/* MN10300 CPU cache invalidation routines - * - * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include "cache.inc" - - .am33_2 - - .globl debugger_local_cache_flushinv - -############################################################################### -# -# void debugger_local_cache_flushinv(void) -# -# Invalidate the entire icache -# -############################################################################### - ALIGN - .globl debugger_local_cache_flushinv - .type debugger_local_cache_flushinv,@function -debugger_local_cache_flushinv: - # - # we only need to invalidate the icache in this cache mode - # - mov CHCTR,a0 - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq debugger_local_cache_flushinv_end - - invalidate_icache 1 - -debugger_local_cache_flushinv_end: - ret [],0 - .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv diff --git a/arch/mn10300/mm/cache-disabled.c b/arch/mn10300/mm/cache-disabled.c deleted file mode 100644 index f669ea42aba6..000000000000 --- a/arch/mn10300/mm/cache-disabled.c +++ /dev/null @@ -1,21 +0,0 @@ -/* Handle the cache being disabled - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include - -/* - * allow userspace to flush the instruction cache - */ -asmlinkage long sys_cacheflush(unsigned long start, unsigned long end) -{ - if (end < start) - return -EINVAL; - return 0; -} diff --git a/arch/mn10300/mm/cache-flush-by-reg.S b/arch/mn10300/mm/cache-flush-by-reg.S deleted file mode 100644 index 1dcae0211671..000000000000 --- a/arch/mn10300/mm/cache-flush-by-reg.S +++ /dev/null @@ -1,308 +0,0 @@ -/* MN10300 CPU core caching routines, using indirect regs on cache controller - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include - - .am33_2 - -#ifndef CONFIG_SMP - .globl mn10300_dcache_flush - .globl mn10300_dcache_flush_page - .globl mn10300_dcache_flush_range - .globl mn10300_dcache_flush_range2 - .globl mn10300_dcache_flush_inv - .globl mn10300_dcache_flush_inv_page - .globl mn10300_dcache_flush_inv_range - .globl mn10300_dcache_flush_inv_range2 - -mn10300_dcache_flush = mn10300_local_dcache_flush -mn10300_dcache_flush_page = mn10300_local_dcache_flush_page -mn10300_dcache_flush_range = mn10300_local_dcache_flush_range -mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2 -mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv -mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page -mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range -mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2 - -#endif /* !CONFIG_SMP */ - -############################################################################### -# -# void mn10300_local_dcache_flush(void) -# Flush the entire data cache back to RAM -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_flush - .type mn10300_local_dcache_flush,@function -mn10300_local_dcache_flush: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_local_dcache_flush_end - - mov DCPGCR,a0 - - LOCAL_CLI_SAVE(d1) - - # wait for busy bit of area purge - setlb - mov (a0),d0 - btst DCPGCR_DCPGBSY,d0 - lne - - # set mask - clr d0 - mov d0,(DCPGMR) - - # area purge - # - # DCPGCR = DCPGCR_DCP - # - mov DCPGCR_DCP,d0 - mov d0,(a0) - - # wait for busy bit of area purge - setlb - mov (a0),d0 - btst DCPGCR_DCPGBSY,d0 - lne - - LOCAL_IRQ_RESTORE(d1) - -mn10300_local_dcache_flush_end: - ret [],0 - .size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush - -############################################################################### -# -# void mn10300_local_dcache_flush_page(unsigned long start) -# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end) -# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size) -# Flush a range of addresses on a page in the dcache -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_flush_page - .globl mn10300_local_dcache_flush_range - .globl mn10300_local_dcache_flush_range2 - .type mn10300_local_dcache_flush_page,@function - .type mn10300_local_dcache_flush_range,@function - .type mn10300_local_dcache_flush_range2,@function -mn10300_local_dcache_flush_page: - and ~(PAGE_SIZE-1),d0 - mov PAGE_SIZE,d1 -mn10300_local_dcache_flush_range2: - add d0,d1 -mn10300_local_dcache_flush_range: - movm [d2,d3,a2],(sp) - - movhu (CHCTR),d2 - btst CHCTR_DCEN,d2 - beq mn10300_local_dcache_flush_range_end - - # calculate alignsize - # - # alignsize = L1_CACHE_BYTES; - # for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1) - # alignsize <<= 1; - # d2 = alignsize; - # - mov L1_CACHE_BYTES,d2 - sub d0,d1,d3 - add -1,d3 - lsr L1_CACHE_SHIFT,d3 - beq 2f -1: - add d2,d2 - lsr 1,d3 - bne 1b -2: - mov d1,a1 # a1 = end - - LOCAL_CLI_SAVE(d3) - mov DCPGCR,a0 - - # wait for busy bit of area purge - setlb - mov (a0),d1 - btst DCPGCR_DCPGBSY,d1 - lne - - # determine the mask - mov d2,d1 - add -1,d1 - not d1 # d1 = mask = ~(alignsize-1) - mov d1,(DCPGMR) - - and d1,d0,a2 # a2 = mask & start - -dcpgloop: - # area purge - mov a2,d0 - or DCPGCR_DCP,d0 - mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCP - - # wait for busy bit of area purge - setlb - mov (a0),d1 - btst DCPGCR_DCPGBSY,d1 - lne - - # check purge of end address - add d2,a2 # a2 += alignsize - cmp a1,a2 # if (a2 < end) goto dcpgloop - bns dcpgloop - - LOCAL_IRQ_RESTORE(d3) - -mn10300_local_dcache_flush_range_end: - ret [d2,d3,a2],12 - - .size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page - .size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range - .size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2 - -############################################################################### -# -# void mn10300_local_dcache_flush_inv(void) -# Flush the entire data cache and invalidate all entries -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_flush_inv - .type mn10300_local_dcache_flush_inv,@function -mn10300_local_dcache_flush_inv: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_local_dcache_flush_inv_end - - mov DCPGCR,a0 - - LOCAL_CLI_SAVE(d1) - - # wait for busy bit of area purge & invalidate - setlb - mov (a0),d0 - btst DCPGCR_DCPGBSY,d0 - lne - - # set the mask to cover everything - clr d0 - mov d0,(DCPGMR) - - # area purge & invalidate - mov DCPGCR_DCP|DCPGCR_DCI,d0 - mov d0,(a0) - - # wait for busy bit of area purge & invalidate - setlb - mov (a0),d0 - btst DCPGCR_DCPGBSY,d0 - lne - - LOCAL_IRQ_RESTORE(d1) - -mn10300_local_dcache_flush_inv_end: - ret [],0 - .size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv - -############################################################################### -# -# void mn10300_local_dcache_flush_inv_page(unsigned long start) -# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end) -# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size) -# Flush and invalidate a range of addresses on a page in the dcache -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_flush_inv_page - .globl mn10300_local_dcache_flush_inv_range - .globl mn10300_local_dcache_flush_inv_range2 - .type mn10300_local_dcache_flush_inv_page,@function - .type mn10300_local_dcache_flush_inv_range,@function - .type mn10300_local_dcache_flush_inv_range2,@function -mn10300_local_dcache_flush_inv_page: - and ~(PAGE_SIZE-1),d0 - mov PAGE_SIZE,d1 -mn10300_local_dcache_flush_inv_range2: - add d0,d1 -mn10300_local_dcache_flush_inv_range: - movm [d2,d3,a2],(sp) - - movhu (CHCTR),d2 - btst CHCTR_DCEN,d2 - beq mn10300_local_dcache_flush_inv_range_end - - # calculate alignsize - # - # alignsize = L1_CACHE_BYTES; - # for (i = (end - start - 1) / L1_CACHE_BYTES; i > 0; i >>= 1) - # alignsize <<= 1; - # d2 = alignsize - # - mov L1_CACHE_BYTES,d2 - sub d0,d1,d3 - add -1,d3 - lsr L1_CACHE_SHIFT,d3 - beq 2f -1: - add d2,d2 - lsr 1,d3 - bne 1b -2: - mov d1,a1 # a1 = end - - LOCAL_CLI_SAVE(d3) - mov DCPGCR,a0 - - # wait for busy bit of area purge & invalidate - setlb - mov (a0),d1 - btst DCPGCR_DCPGBSY,d1 - lne - - # set the mask - mov d2,d1 - add -1,d1 - not d1 # d1 = mask = ~(alignsize-1) - mov d1,(DCPGMR) - - and d1,d0,a2 # a2 = mask & start - -dcpgivloop: - # area purge & invalidate - mov a2,d0 - or DCPGCR_DCP|DCPGCR_DCI,d0 - mov d0,(a0) # DCPGCR = (mask & start)|DCPGCR_DCP|DCPGCR_DCI - - # wait for busy bit of area purge & invalidate - setlb - mov (a0),d1 - btst DCPGCR_DCPGBSY,d1 - lne - - # check purge & invalidate of end address - add d2,a2 # a2 += alignsize - cmp a1,a2 # if (a2 < end) goto dcpgivloop - bns dcpgivloop - - LOCAL_IRQ_RESTORE(d3) - -mn10300_local_dcache_flush_inv_range_end: - ret [d2,d3,a2],12 - .size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page - .size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range - .size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2 diff --git a/arch/mn10300/mm/cache-flush-by-tag.S b/arch/mn10300/mm/cache-flush-by-tag.S deleted file mode 100644 index 1ddc06849242..000000000000 --- a/arch/mn10300/mm/cache-flush-by-tag.S +++ /dev/null @@ -1,250 +0,0 @@ -/* MN10300 CPU core caching routines, using direct tag flushing - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include - - .am33_2 - -#ifndef CONFIG_SMP - .globl mn10300_dcache_flush - .globl mn10300_dcache_flush_page - .globl mn10300_dcache_flush_range - .globl mn10300_dcache_flush_range2 - .globl mn10300_dcache_flush_inv - .globl mn10300_dcache_flush_inv_page - .globl mn10300_dcache_flush_inv_range - .globl mn10300_dcache_flush_inv_range2 - -mn10300_dcache_flush = mn10300_local_dcache_flush -mn10300_dcache_flush_page = mn10300_local_dcache_flush_page -mn10300_dcache_flush_range = mn10300_local_dcache_flush_range -mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2 -mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv -mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page -mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range -mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2 - -#endif /* !CONFIG_SMP */ - -############################################################################### -# -# void mn10300_local_dcache_flush(void) -# Flush the entire data cache back to RAM -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_flush - .type mn10300_local_dcache_flush,@function -mn10300_local_dcache_flush: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_local_dcache_flush_end - - # read the addresses tagged in the cache's tag RAM and attempt to flush - # those addresses specifically - # - we rely on the hardware to filter out invalid tag entry addresses - mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address - mov DCACHE_PURGE(0,0),a1 # dcache purge request address - mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries - -mn10300_local_dcache_flush_loop: - mov (a0),d0 - and L1_CACHE_TAG_MASK,d0 - or L1_CACHE_TAG_VALID,d0 # retain valid entries in the - # cache - mov d0,(a1) # conditional purge - - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - add -1,d1 - bne mn10300_local_dcache_flush_loop - -mn10300_local_dcache_flush_end: - ret [],0 - .size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush - -############################################################################### -# -# void mn10300_local_dcache_flush_page(unsigned long start) -# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end) -# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size) -# Flush a range of addresses on a page in the dcache -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_flush_page - .globl mn10300_local_dcache_flush_range - .globl mn10300_local_dcache_flush_range2 - .type mn10300_local_dcache_flush_page,@function - .type mn10300_local_dcache_flush_range,@function - .type mn10300_local_dcache_flush_range2,@function -mn10300_local_dcache_flush_page: - and ~(PAGE_SIZE-1),d0 - mov PAGE_SIZE,d1 -mn10300_local_dcache_flush_range2: - add d0,d1 -mn10300_local_dcache_flush_range: - movm [d2],(sp) - - movhu (CHCTR),d2 - btst CHCTR_DCEN,d2 - beq mn10300_local_dcache_flush_range_end - - sub d0,d1,a0 - cmp MN10300_DCACHE_FLUSH_BORDER,a0 - ble 1f - - movm (sp),[d2] - bra mn10300_local_dcache_flush -1: - - # round start addr down - and L1_CACHE_TAG_MASK,d0 - mov d0,a1 - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_MASK,d1 - - # write a request to flush all instances of an address from the cache - mov DCACHE_PURGE(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache purge control - # reg address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - - or L1_CACHE_TAG_VALID,a1 # retain valid entries in the - # cache - -mn10300_local_dcache_flush_range_loop: - mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line - # all ways - - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 - add -1,d1 - bne mn10300_local_dcache_flush_range_loop - -mn10300_local_dcache_flush_range_end: - ret [d2],4 - - .size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page - .size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range - .size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2 - -############################################################################### -# -# void mn10300_local_dcache_flush_inv(void) -# Flush the entire data cache and invalidate all entries -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_flush_inv - .type mn10300_local_dcache_flush_inv,@function -mn10300_local_dcache_flush_inv: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_local_dcache_flush_inv_end - - mov L1_CACHE_NENTRIES,d1 - clr a1 - -mn10300_local_dcache_flush_inv_loop: - mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge - mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge - mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge - mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge - - add L1_CACHE_BYTES,a1 - add -1,d1 - bne mn10300_local_dcache_flush_inv_loop - -mn10300_local_dcache_flush_inv_end: - ret [],0 - .size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv - -############################################################################### -# -# void mn10300_local_dcache_flush_inv_page(unsigned long start) -# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end) -# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size) -# Flush and invalidate a range of addresses on a page in the dcache -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_flush_inv_page - .globl mn10300_local_dcache_flush_inv_range - .globl mn10300_local_dcache_flush_inv_range2 - .type mn10300_local_dcache_flush_inv_page,@function - .type mn10300_local_dcache_flush_inv_range,@function - .type mn10300_local_dcache_flush_inv_range2,@function -mn10300_local_dcache_flush_inv_page: - and ~(PAGE_SIZE-1),d0 - mov PAGE_SIZE,d1 -mn10300_local_dcache_flush_inv_range2: - add d0,d1 -mn10300_local_dcache_flush_inv_range: - movm [d2],(sp) - - movhu (CHCTR),d2 - btst CHCTR_DCEN,d2 - beq mn10300_local_dcache_flush_inv_range_end - - sub d0,d1,a0 - cmp MN10300_DCACHE_FLUSH_INV_BORDER,a0 - ble 1f - - movm (sp),[d2] - bra mn10300_local_dcache_flush_inv -1: - - and L1_CACHE_TAG_MASK,d0 # round start addr down - mov d0,a1 - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_MASK,d1 - - # write a request to flush and invalidate all instances of an address - # from the cache - mov DCACHE_PURGE(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache purge control - # reg address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - -mn10300_local_dcache_flush_inv_range_loop: - mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line - # in all ways - - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 - add -1,d1 - bne mn10300_local_dcache_flush_inv_range_loop - -mn10300_local_dcache_flush_inv_range_end: - ret [d2],4 - .size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page - .size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range - .size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2 diff --git a/arch/mn10300/mm/cache-flush-icache.c b/arch/mn10300/mm/cache-flush-icache.c deleted file mode 100644 index fdb1a9db20f0..000000000000 --- a/arch/mn10300/mm/cache-flush-icache.c +++ /dev/null @@ -1,155 +0,0 @@ -/* Flush dcache and invalidate icache when the dcache is in writeback mode - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include "cache-smp.h" - -/** - * flush_icache_page - Flush a page from the dcache and invalidate the icache - * @vma: The VMA the page is part of. - * @page: The page to be flushed. - * - * Write a page back from the dcache and invalidate the icache so that we can - * run code from it that we've just written into it - */ -void flush_icache_page(struct vm_area_struct *vma, struct page *page) -{ - unsigned long start = page_to_phys(page); - unsigned long flags; - - flags = smp_lock_cache(); - - mn10300_local_dcache_flush_page(start); - mn10300_local_icache_inv_page(start); - - smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start, start + PAGE_SIZE); - smp_unlock_cache(flags); -} -EXPORT_SYMBOL(flush_icache_page); - -/** - * flush_icache_page_range - Flush dcache and invalidate icache for part of a - * single page - * @start: The starting virtual address of the page part. - * @end: The ending virtual address of the page part. - * - * Flush the dcache and invalidate the icache for part of a single page, as - * determined by the virtual addresses given. The page must be in the paged - * area. - */ -static void flush_icache_page_range(unsigned long start, unsigned long end) -{ - unsigned long addr, size, off; - struct page *page; - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *ppte, pte; - - /* work out how much of the page to flush */ - off = start & ~PAGE_MASK; - size = end - start; - - /* get the physical address the page is mapped to from the page - * tables */ - pgd = pgd_offset(current->mm, start); - if (!pgd || !pgd_val(*pgd)) - return; - - pud = pud_offset(pgd, start); - if (!pud || !pud_val(*pud)) - return; - - pmd = pmd_offset(pud, start); - if (!pmd || !pmd_val(*pmd)) - return; - - ppte = pte_offset_map(pmd, start); - if (!ppte) - return; - pte = *ppte; - pte_unmap(ppte); - - if (pte_none(pte)) - return; - - page = pte_page(pte); - if (!page) - return; - - addr = page_to_phys(page); - - /* flush the dcache and invalidate the icache coverage on that - * region */ - mn10300_local_dcache_flush_range2(addr + off, size); - mn10300_local_icache_inv_range2(addr + off, size); - smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start, end); -} - -/** - * flush_icache_range - Globally flush dcache and invalidate icache for region - * @start: The starting virtual address of the region. - * @end: The ending virtual address of the region. - * - * This is used by the kernel to globally flush some code it has just written - * from the dcache back to RAM and then to globally invalidate the icache over - * that region so that that code can be run on all CPUs in the system. - */ -void flush_icache_range(unsigned long start, unsigned long end) -{ - unsigned long start_page, end_page; - unsigned long flags; - - flags = smp_lock_cache(); - - if (end > 0x80000000UL) { - /* addresses above 0xa0000000 do not go through the cache */ - if (end > 0xa0000000UL) { - end = 0xa0000000UL; - if (start >= end) - goto done; - } - - /* kernel addresses between 0x80000000 and 0x9fffffff do not - * require page tables, so we just map such addresses - * directly */ - start_page = (start >= 0x80000000UL) ? start : 0x80000000UL; - mn10300_local_dcache_flush_range(start_page, end); - mn10300_local_icache_inv_range(start_page, end); - smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start_page, end); - if (start_page == start) - goto done; - end = start_page; - } - - start_page = start & PAGE_MASK; - end_page = (end - 1) & PAGE_MASK; - - if (start_page == end_page) { - /* the first and last bytes are on the same page */ - flush_icache_page_range(start, end); - } else if (start_page + 1 == end_page) { - /* split over two virtually contiguous pages */ - flush_icache_page_range(start, end_page); - flush_icache_page_range(end_page, end); - } else { - /* more than 2 pages; just flush the entire cache */ - mn10300_dcache_flush(); - mn10300_icache_inv(); - smp_cache_call(SMP_IDCACHE_INV_FLUSH, 0, 0); - } - -done: - smp_unlock_cache(flags); -} -EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/mn10300/mm/cache-inv-by-reg.S b/arch/mn10300/mm/cache-inv-by-reg.S deleted file mode 100644 index a60825b91e77..000000000000 --- a/arch/mn10300/mm/cache-inv-by-reg.S +++ /dev/null @@ -1,350 +0,0 @@ -/* MN10300 CPU cache invalidation routines, using automatic purge registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include "cache.inc" - -#define mn10300_local_dcache_inv_range_intr_interval \ - +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) - -#if mn10300_local_dcache_inv_range_intr_interval > 0xff -#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less -#endif - - .am33_2 - -#ifndef CONFIG_SMP - .globl mn10300_icache_inv - .globl mn10300_icache_inv_page - .globl mn10300_icache_inv_range - .globl mn10300_icache_inv_range2 - .globl mn10300_dcache_inv - .globl mn10300_dcache_inv_page - .globl mn10300_dcache_inv_range - .globl mn10300_dcache_inv_range2 - -mn10300_icache_inv = mn10300_local_icache_inv -mn10300_icache_inv_page = mn10300_local_icache_inv_page -mn10300_icache_inv_range = mn10300_local_icache_inv_range -mn10300_icache_inv_range2 = mn10300_local_icache_inv_range2 -mn10300_dcache_inv = mn10300_local_dcache_inv -mn10300_dcache_inv_page = mn10300_local_dcache_inv_page -mn10300_dcache_inv_range = mn10300_local_dcache_inv_range -mn10300_dcache_inv_range2 = mn10300_local_dcache_inv_range2 - -#endif /* !CONFIG_SMP */ - -############################################################################### -# -# void mn10300_local_icache_inv(void) -# Invalidate the entire icache -# -############################################################################### - ALIGN - .globl mn10300_local_icache_inv - .type mn10300_local_icache_inv,@function -mn10300_local_icache_inv: - mov CHCTR,a0 - - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq mn10300_local_icache_inv_end - - invalidate_icache 1 - -mn10300_local_icache_inv_end: - ret [],0 - .size mn10300_local_icache_inv,.-mn10300_local_icache_inv - -############################################################################### -# -# void mn10300_local_dcache_inv(void) -# Invalidate the entire dcache -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_inv - .type mn10300_local_dcache_inv,@function -mn10300_local_dcache_inv: - mov CHCTR,a0 - - movhu (a0),d0 - btst CHCTR_DCEN,d0 - beq mn10300_local_dcache_inv_end - - invalidate_dcache 1 - -mn10300_local_dcache_inv_end: - ret [],0 - .size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv - -############################################################################### -# -# void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end) -# void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size) -# void mn10300_local_dcache_inv_page(unsigned long start) -# Invalidate a range of addresses on a page in the dcache -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_inv_page - .globl mn10300_local_dcache_inv_range - .globl mn10300_local_dcache_inv_range2 - .type mn10300_local_dcache_inv_page,@function - .type mn10300_local_dcache_inv_range,@function - .type mn10300_local_dcache_inv_range2,@function -mn10300_local_dcache_inv_page: - and ~(PAGE_SIZE-1),d0 - mov PAGE_SIZE,d1 -mn10300_local_dcache_inv_range2: - add d0,d1 -mn10300_local_dcache_inv_range: - # If we are in writeback mode we check the start and end alignments, - # and if they're not cacheline-aligned, we must flush any bits outside - # the range that share cachelines with stuff inside the range -#ifdef CONFIG_MN10300_CACHE_WBACK - btst ~L1_CACHE_TAG_MASK,d0 - bne 1f - btst ~L1_CACHE_TAG_MASK,d1 - beq 2f -1: - bra mn10300_local_dcache_flush_inv_range -2: -#endif /* CONFIG_MN10300_CACHE_WBACK */ - - movm [d2,d3,a2],(sp) - - mov CHCTR,a0 - movhu (a0),d2 - btst CHCTR_DCEN,d2 - beq mn10300_local_dcache_inv_range_end - - # round the addresses out to be full cachelines, unless we're in - # writeback mode, in which case we would be in flush and invalidate by - # now -#ifndef CONFIG_MN10300_CACHE_WBACK - and L1_CACHE_TAG_MASK,d0 # round start addr down - - mov L1_CACHE_BYTES-1,d2 - add d2,d1 - and L1_CACHE_TAG_MASK,d1 # round end addr up -#endif /* !CONFIG_MN10300_CACHE_WBACK */ - - sub d0,d1,d2 # calculate the total size - mov d0,a2 # A2 = start address - mov d1,a1 # A1 = end address - - LOCAL_CLI_SAVE(d3) - - mov DCPGCR,a0 # make sure the purger isn't busy - setlb - mov (a0),d0 - btst DCPGCR_DCPGBSY,d0 - lne - - # skip initial address alignment calculation if address is zero - mov d2,d1 - cmp 0,a2 - beq 1f - -dcivloop: - /* calculate alignsize - * - * alignsize = L1_CACHE_BYTES; - * while (! start & alignsize) { - * alignsize <<=1; - * } - * d1 = alignsize; - */ - mov L1_CACHE_BYTES,d1 - lsr 1,d1 - setlb - add d1,d1 - mov d1,d0 - and a2,d0 - leq - -1: - /* calculate invsize - * - * if (totalsize > alignsize) { - * invsize = alignsize; - * } else { - * invsize = totalsize; - * tmp = 0x80000000; - * while (! invsize & tmp) { - * tmp >>= 1; - * } - * invsize = tmp; - * } - * d1 = invsize - */ - cmp d2,d1 - bns 2f - mov d2,d1 - - mov 0x80000000,d0 # start from 31bit=1 - setlb - lsr 1,d0 - mov d0,e0 - and d1,e0 - leq - mov d0,d1 - -2: - /* set mask - * - * mask = ~(invsize-1); - * DCPGMR = mask; - */ - mov d1,d0 - add -1,d0 - not d0 - mov d0,(DCPGMR) - - # invalidate area - mov a2,d0 - or DCPGCR_DCI,d0 - mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCI - - setlb # wait for the purge to complete - mov (a0),d0 - btst DCPGCR_DCPGBSY,d0 - lne - - sub d1,d2 # decrease size remaining - add d1,a2 # increase next start address - - /* check invalidating of end address - * - * a2 = a2 + invsize - * if (a2 < end) { - * goto dcivloop; - * } */ - cmp a1,a2 - bns dcivloop - - LOCAL_IRQ_RESTORE(d3) - -mn10300_local_dcache_inv_range_end: - ret [d2,d3,a2],12 - .size mn10300_local_dcache_inv_page,.-mn10300_local_dcache_inv_page - .size mn10300_local_dcache_inv_range,.-mn10300_local_dcache_inv_range - .size mn10300_local_dcache_inv_range2,.-mn10300_local_dcache_inv_range2 - -############################################################################### -# -# void mn10300_local_icache_inv_page(unsigned long start) -# void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size) -# void mn10300_local_icache_inv_range(unsigned long start, unsigned long end) -# Invalidate a range of addresses on a page in the icache -# -############################################################################### - ALIGN - .globl mn10300_local_icache_inv_page - .globl mn10300_local_icache_inv_range - .globl mn10300_local_icache_inv_range2 - .type mn10300_local_icache_inv_page,@function - .type mn10300_local_icache_inv_range,@function - .type mn10300_local_icache_inv_range2,@function -mn10300_local_icache_inv_page: - and ~(PAGE_SIZE-1),d0 - mov PAGE_SIZE,d1 -mn10300_local_icache_inv_range2: - add d0,d1 -mn10300_local_icache_inv_range: - movm [d2,d3,a2],(sp) - - mov CHCTR,a0 - movhu (a0),d2 - btst CHCTR_ICEN,d2 - beq mn10300_local_icache_inv_range_reg_end - - /* calculate alignsize - * - * alignsize = L1_CACHE_BYTES; - * for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1) { - * alignsize <<= 1; - * } - * d2 = alignsize; - */ - mov L1_CACHE_BYTES,d2 - sub d0,d1,d3 - add -1,d3 - lsr L1_CACHE_SHIFT,d3 - beq 2f -1: - add d2,d2 - lsr 1,d3 - bne 1b -2: - - /* a1 = end */ - mov d1,a1 - - LOCAL_CLI_SAVE(d3) - - mov ICIVCR,a0 - /* wait for busy bit of area invalidation */ - setlb - mov (a0),d1 - btst ICIVCR_ICIVBSY,d1 - lne - - /* set mask - * - * mask = ~(alignsize-1); - * ICIVMR = mask; - */ - mov d2,d1 - add -1,d1 - not d1 - mov d1,(ICIVMR) - /* a2 = mask & start */ - and d1,d0,a2 - -icivloop: - /* area invalidate - * - * ICIVCR = (mask & start) | ICIVCR_ICI - */ - mov a2,d0 - or ICIVCR_ICI,d0 - mov d0,(a0) - - /* wait for busy bit of area invalidation */ - setlb - mov (a0),d1 - btst ICIVCR_ICIVBSY,d1 - lne - - /* check invalidating of end address - * - * a2 = a2 + alignsize - * if (a2 < end) { - * goto icivloop; - * } */ - add d2,a2 - cmp a1,a2 - bns icivloop - - LOCAL_IRQ_RESTORE(d3) - -mn10300_local_icache_inv_range_reg_end: - ret [d2,d3,a2],12 - .size mn10300_local_icache_inv_page,.-mn10300_local_icache_inv_page - .size mn10300_local_icache_inv_range,.-mn10300_local_icache_inv_range - .size mn10300_local_icache_inv_range2,.-mn10300_local_icache_inv_range2 diff --git a/arch/mn10300/mm/cache-inv-by-tag.S b/arch/mn10300/mm/cache-inv-by-tag.S deleted file mode 100644 index ccedce9c144d..000000000000 --- a/arch/mn10300/mm/cache-inv-by-tag.S +++ /dev/null @@ -1,276 +0,0 @@ -/* MN10300 CPU core caching routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include "cache.inc" - -#define mn10300_local_dcache_inv_range_intr_interval \ - +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) - -#if mn10300_local_dcache_inv_range_intr_interval > 0xff -#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less -#endif - - .am33_2 - - .globl mn10300_local_icache_inv_page - .globl mn10300_local_icache_inv_range - .globl mn10300_local_icache_inv_range2 - -mn10300_local_icache_inv_page = mn10300_local_icache_inv -mn10300_local_icache_inv_range = mn10300_local_icache_inv -mn10300_local_icache_inv_range2 = mn10300_local_icache_inv - -#ifndef CONFIG_SMP - .globl mn10300_icache_inv - .globl mn10300_icache_inv_page - .globl mn10300_icache_inv_range - .globl mn10300_icache_inv_range2 - .globl mn10300_dcache_inv - .globl mn10300_dcache_inv_page - .globl mn10300_dcache_inv_range - .globl mn10300_dcache_inv_range2 - -mn10300_icache_inv = mn10300_local_icache_inv -mn10300_icache_inv_page = mn10300_local_icache_inv_page -mn10300_icache_inv_range = mn10300_local_icache_inv_range -mn10300_icache_inv_range2 = mn10300_local_icache_inv_range2 -mn10300_dcache_inv = mn10300_local_dcache_inv -mn10300_dcache_inv_page = mn10300_local_dcache_inv_page -mn10300_dcache_inv_range = mn10300_local_dcache_inv_range -mn10300_dcache_inv_range2 = mn10300_local_dcache_inv_range2 - -#endif /* !CONFIG_SMP */ - -############################################################################### -# -# void mn10300_local_icache_inv(void) -# Invalidate the entire icache -# -############################################################################### - ALIGN - .globl mn10300_local_icache_inv - .type mn10300_local_icache_inv,@function -mn10300_local_icache_inv: - mov CHCTR,a0 - - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq mn10300_local_icache_inv_end - - invalidate_icache 1 - -mn10300_local_icache_inv_end: - ret [],0 - .size mn10300_local_icache_inv,.-mn10300_local_icache_inv - -############################################################################### -# -# void mn10300_local_dcache_inv(void) -# Invalidate the entire dcache -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_inv - .type mn10300_local_dcache_inv,@function -mn10300_local_dcache_inv: - mov CHCTR,a0 - - movhu (a0),d0 - btst CHCTR_DCEN,d0 - beq mn10300_local_dcache_inv_end - - invalidate_dcache 1 - -mn10300_local_dcache_inv_end: - ret [],0 - .size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv - -############################################################################### -# -# void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end) -# void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size) -# void mn10300_local_dcache_inv_page(unsigned long start) -# Invalidate a range of addresses on a page in the dcache -# -############################################################################### - ALIGN - .globl mn10300_local_dcache_inv_page - .globl mn10300_local_dcache_inv_range - .globl mn10300_local_dcache_inv_range2 - .type mn10300_local_dcache_inv_page,@function - .type mn10300_local_dcache_inv_range,@function - .type mn10300_local_dcache_inv_range2,@function -mn10300_local_dcache_inv_page: - and ~(PAGE_SIZE-1),d0 - mov PAGE_SIZE,d1 -mn10300_local_dcache_inv_range2: - add d0,d1 -mn10300_local_dcache_inv_range: - # If we are in writeback mode we check the start and end alignments, - # and if they're not cacheline-aligned, we must flush any bits outside - # the range that share cachelines with stuff inside the range -#ifdef CONFIG_MN10300_CACHE_WBACK - btst ~L1_CACHE_TAG_MASK,d0 - bne 1f - btst ~L1_CACHE_TAG_MASK,d1 - beq 2f -1: - bra mn10300_local_dcache_flush_inv_range -2: -#endif /* CONFIG_MN10300_CACHE_WBACK */ - - movm [d2,d3,a2],(sp) - - mov CHCTR,a2 - movhu (a2),d2 - btst CHCTR_DCEN,d2 - beq mn10300_local_dcache_inv_range_end - -#ifndef CONFIG_MN10300_CACHE_WBACK - and L1_CACHE_TAG_MASK,d0 # round start addr down - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_MASK,d1 -#endif /* !CONFIG_MN10300_CACHE_WBACK */ - mov d0,a1 - - clr d2 # we're going to clear tag RAM - # entries - - # read the tags from the tag RAM, and if they indicate a valid dirty - # cache line then invalidate that line - mov DCACHE_TAG(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache tag RAM - # access address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - - and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base - -mn10300_local_dcache_inv_range_outer_loop: - LOCAL_CLI_SAVE(d3) - - # disable the dcache - movhu (a2),d0 - and ~CHCTR_DCEN,d0 - movhu d0,(a2) - - # and wait for it to calm down - setlb - movhu (a2),d0 - btst CHCTR_DCBUSY,d0 - lne - -mn10300_local_dcache_inv_range_loop: - - # process the way 0 slot - mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_local_dcache_inv_range_skip_0 # jump if this cacheline - # is not valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_local_dcache_inv_range_skip_0 # jump if not this cacheline - - mov d2,(L1_CACHE_WAYDISP*0,a0) # kill the tag - -mn10300_local_dcache_inv_range_skip_0: - - # process the way 1 slot - mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_local_dcache_inv_range_skip_1 # jump if this cacheline - # is not valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_local_dcache_inv_range_skip_1 # jump if not this cacheline - - mov d2,(L1_CACHE_WAYDISP*1,a0) # kill the tag - -mn10300_local_dcache_inv_range_skip_1: - - # process the way 2 slot - mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_local_dcache_inv_range_skip_2 # jump if this cacheline - # is not valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_local_dcache_inv_range_skip_2 # jump if not this cacheline - - mov d2,(L1_CACHE_WAYDISP*2,a0) # kill the tag - -mn10300_local_dcache_inv_range_skip_2: - - # process the way 3 slot - mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_local_dcache_inv_range_skip_3 # jump if this cacheline - # is not valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_local_dcache_inv_range_skip_3 # jump if not this cacheline - - mov d2,(L1_CACHE_WAYDISP*3,a0) # kill the tag - -mn10300_local_dcache_inv_range_skip_3: - - # approx every N steps we re-enable the cache and see if there are any - # interrupts to be processed - # we also break out if we've reached the end of the loop - # (the bottom nibble of the count is zero in both cases) - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - and ~L1_CACHE_WAYDISP,a0 - add -1,d1 - btst mn10300_local_dcache_inv_range_intr_interval,d1 - bne mn10300_local_dcache_inv_range_loop - - # wait for the cache to finish what it's doing - setlb - movhu (a2),d0 - btst CHCTR_DCBUSY,d0 - lne - - # and reenable it - or CHCTR_DCEN,d0 - movhu d0,(a2) - movhu (a2),d0 - - # re-enable interrupts - # - we don't bother with delay NOPs as we'll have enough instructions - # before we disable interrupts again to give the interrupts a chance - # to happen - LOCAL_IRQ_RESTORE(d3) - - # go around again if the counter hasn't yet reached zero - add 0,d1 - bne mn10300_local_dcache_inv_range_outer_loop - -mn10300_local_dcache_inv_range_end: - ret [d2,d3,a2],12 - .size mn10300_local_dcache_inv_page,.-mn10300_local_dcache_inv_page - .size mn10300_local_dcache_inv_range,.-mn10300_local_dcache_inv_range - .size mn10300_local_dcache_inv_range2,.-mn10300_local_dcache_inv_range2 diff --git a/arch/mn10300/mm/cache-inv-icache.c b/arch/mn10300/mm/cache-inv-icache.c deleted file mode 100644 index a6b63dde603d..000000000000 --- a/arch/mn10300/mm/cache-inv-icache.c +++ /dev/null @@ -1,129 +0,0 @@ -/* Invalidate icache when dcache doesn't need invalidation as it's in - * write-through mode - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include "cache-smp.h" - -/** - * flush_icache_page_range - Flush dcache and invalidate icache for part of a - * single page - * @start: The starting virtual address of the page part. - * @end: The ending virtual address of the page part. - * - * Invalidate the icache for part of a single page, as determined by the - * virtual addresses given. The page must be in the paged area. The dcache is - * not flushed as the cache must be in write-through mode to get here. - */ -static void flush_icache_page_range(unsigned long start, unsigned long end) -{ - unsigned long addr, size, off; - struct page *page; - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *ppte, pte; - - /* work out how much of the page to flush */ - off = start & ~PAGE_MASK; - size = end - start; - - /* get the physical address the page is mapped to from the page - * tables */ - pgd = pgd_offset(current->mm, start); - if (!pgd || !pgd_val(*pgd)) - return; - - pud = pud_offset(pgd, start); - if (!pud || !pud_val(*pud)) - return; - - pmd = pmd_offset(pud, start); - if (!pmd || !pmd_val(*pmd)) - return; - - ppte = pte_offset_map(pmd, start); - if (!ppte) - return; - pte = *ppte; - pte_unmap(ppte); - - if (pte_none(pte)) - return; - - page = pte_page(pte); - if (!page) - return; - - addr = page_to_phys(page); - - /* invalidate the icache coverage on that region */ - mn10300_local_icache_inv_range2(addr + off, size); - smp_cache_call(SMP_ICACHE_INV_RANGE, start, end); -} - -/** - * flush_icache_range - Globally flush dcache and invalidate icache for region - * @start: The starting virtual address of the region. - * @end: The ending virtual address of the region. - * - * This is used by the kernel to globally flush some code it has just written - * from the dcache back to RAM and then to globally invalidate the icache over - * that region so that that code can be run on all CPUs in the system. - */ -void flush_icache_range(unsigned long start, unsigned long end) -{ - unsigned long start_page, end_page; - unsigned long flags; - - flags = smp_lock_cache(); - - if (end > 0x80000000UL) { - /* addresses above 0xa0000000 do not go through the cache */ - if (end > 0xa0000000UL) { - end = 0xa0000000UL; - if (start >= end) - goto done; - } - - /* kernel addresses between 0x80000000 and 0x9fffffff do not - * require page tables, so we just map such addresses - * directly */ - start_page = (start >= 0x80000000UL) ? start : 0x80000000UL; - mn10300_icache_inv_range(start_page, end); - smp_cache_call(SMP_ICACHE_INV_RANGE, start, end); - if (start_page == start) - goto done; - end = start_page; - } - - start_page = start & PAGE_MASK; - end_page = (end - 1) & PAGE_MASK; - - if (start_page == end_page) { - /* the first and last bytes are on the same page */ - flush_icache_page_range(start, end); - } else if (start_page + 1 == end_page) { - /* split over two virtually contiguous pages */ - flush_icache_page_range(start, end_page); - flush_icache_page_range(end_page, end); - } else { - /* more than 2 pages; just flush the entire cache */ - mn10300_local_icache_inv(); - smp_cache_call(SMP_ICACHE_INV, 0, 0); - } - -done: - smp_unlock_cache(flags); -} -EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/mn10300/mm/cache-smp-flush.c b/arch/mn10300/mm/cache-smp-flush.c deleted file mode 100644 index fd51af5eaf70..000000000000 --- a/arch/mn10300/mm/cache-smp-flush.c +++ /dev/null @@ -1,156 +0,0 @@ -/* Functions for global dcache flush when writeback caching in SMP - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include "cache-smp.h" - -/** - * mn10300_dcache_flush - Globally flush data cache - * - * Flush the data cache on all CPUs. - */ -void mn10300_dcache_flush(void) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_flush(); - smp_cache_call(SMP_DCACHE_FLUSH, 0, 0); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_flush_page - Globally flush a page of data cache - * @start: The address of the page of memory to be flushed. - * - * Flush a range of addresses in the data cache on all CPUs covering - * the page that includes the given address. - */ -void mn10300_dcache_flush_page(unsigned long start) -{ - unsigned long flags; - - start &= ~(PAGE_SIZE-1); - - flags = smp_lock_cache(); - mn10300_local_dcache_flush_page(start); - smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, start + PAGE_SIZE); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_flush_range - Globally flush range of data cache - * @start: The start address of the region to be flushed. - * @end: The end address of the region to be flushed. - * - * Flush a range of addresses in the data cache on all CPUs, between start and - * end-1 inclusive. - */ -void mn10300_dcache_flush_range(unsigned long start, unsigned long end) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_flush_range(start, end); - smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, end); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_flush_range2 - Globally flush range of data cache - * @start: The start address of the region to be flushed. - * @size: The size of the region to be flushed. - * - * Flush a range of addresses in the data cache on all CPUs, between start and - * start+size-1 inclusive. - */ -void mn10300_dcache_flush_range2(unsigned long start, unsigned long size) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_flush_range2(start, size); - smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, start + size); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_flush_inv - Globally flush and invalidate data cache - * - * Flush and invalidate the data cache on all CPUs. - */ -void mn10300_dcache_flush_inv(void) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_flush_inv(); - smp_cache_call(SMP_DCACHE_FLUSH_INV, 0, 0); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_flush_inv_page - Globally flush and invalidate a page of data - * cache - * @start: The address of the page of memory to be flushed and invalidated. - * - * Flush and invalidate a range of addresses in the data cache on all CPUs - * covering the page that includes the given address. - */ -void mn10300_dcache_flush_inv_page(unsigned long start) -{ - unsigned long flags; - - start &= ~(PAGE_SIZE-1); - - flags = smp_lock_cache(); - mn10300_local_dcache_flush_inv_page(start); - smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, start + PAGE_SIZE); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_flush_inv_range - Globally flush and invalidate range of data - * cache - * @start: The start address of the region to be flushed and invalidated. - * @end: The end address of the region to be flushed and invalidated. - * - * Flush and invalidate a range of addresses in the data cache on all CPUs, - * between start and end-1 inclusive. - */ -void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_flush_inv_range(start, end); - smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, end); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_flush_inv_range2 - Globally flush and invalidate range of data - * cache - * @start: The start address of the region to be flushed and invalidated. - * @size: The size of the region to be flushed and invalidated. - * - * Flush and invalidate a range of addresses in the data cache on all CPUs, - * between start and start+size-1 inclusive. - */ -void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_flush_inv_range2(start, size); - smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, start + size); - smp_unlock_cache(flags); -} diff --git a/arch/mn10300/mm/cache-smp-inv.c b/arch/mn10300/mm/cache-smp-inv.c deleted file mode 100644 index ff1787358c8e..000000000000 --- a/arch/mn10300/mm/cache-smp-inv.c +++ /dev/null @@ -1,153 +0,0 @@ -/* Functions for global i/dcache invalidation when caching in SMP - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include "cache-smp.h" - -/** - * mn10300_icache_inv - Globally invalidate instruction cache - * - * Invalidate the instruction cache on all CPUs. - */ -void mn10300_icache_inv(void) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_icache_inv(); - smp_cache_call(SMP_ICACHE_INV, 0, 0); - smp_unlock_cache(flags); -} - -/** - * mn10300_icache_inv_page - Globally invalidate a page of instruction cache - * @start: The address of the page of memory to be invalidated. - * - * Invalidate a range of addresses in the instruction cache on all CPUs - * covering the page that includes the given address. - */ -void mn10300_icache_inv_page(unsigned long start) -{ - unsigned long flags; - - start &= ~(PAGE_SIZE-1); - - flags = smp_lock_cache(); - mn10300_local_icache_inv_page(start); - smp_cache_call(SMP_ICACHE_INV_RANGE, start, start + PAGE_SIZE); - smp_unlock_cache(flags); -} - -/** - * mn10300_icache_inv_range - Globally invalidate range of instruction cache - * @start: The start address of the region to be invalidated. - * @end: The end address of the region to be invalidated. - * - * Invalidate a range of addresses in the instruction cache on all CPUs, - * between start and end-1 inclusive. - */ -void mn10300_icache_inv_range(unsigned long start, unsigned long end) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_icache_inv_range(start, end); - smp_cache_call(SMP_ICACHE_INV_RANGE, start, end); - smp_unlock_cache(flags); -} - -/** - * mn10300_icache_inv_range2 - Globally invalidate range of instruction cache - * @start: The start address of the region to be invalidated. - * @size: The size of the region to be invalidated. - * - * Invalidate a range of addresses in the instruction cache on all CPUs, - * between start and start+size-1 inclusive. - */ -void mn10300_icache_inv_range2(unsigned long start, unsigned long size) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_icache_inv_range2(start, size); - smp_cache_call(SMP_ICACHE_INV_RANGE, start, start + size); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_inv - Globally invalidate data cache - * - * Invalidate the data cache on all CPUs. - */ -void mn10300_dcache_inv(void) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_inv(); - smp_cache_call(SMP_DCACHE_INV, 0, 0); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_inv_page - Globally invalidate a page of data cache - * @start: The address of the page of memory to be invalidated. - * - * Invalidate a range of addresses in the data cache on all CPUs covering the - * page that includes the given address. - */ -void mn10300_dcache_inv_page(unsigned long start) -{ - unsigned long flags; - - start &= ~(PAGE_SIZE-1); - - flags = smp_lock_cache(); - mn10300_local_dcache_inv_page(start); - smp_cache_call(SMP_DCACHE_INV_RANGE, start, start + PAGE_SIZE); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_inv_range - Globally invalidate range of data cache - * @start: The start address of the region to be invalidated. - * @end: The end address of the region to be invalidated. - * - * Invalidate a range of addresses in the data cache on all CPUs, between start - * and end-1 inclusive. - */ -void mn10300_dcache_inv_range(unsigned long start, unsigned long end) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_inv_range(start, end); - smp_cache_call(SMP_DCACHE_INV_RANGE, start, end); - smp_unlock_cache(flags); -} - -/** - * mn10300_dcache_inv_range2 - Globally invalidate range of data cache - * @start: The start address of the region to be invalidated. - * @size: The size of the region to be invalidated. - * - * Invalidate a range of addresses in the data cache on all CPUs, between start - * and start+size-1 inclusive. - */ -void mn10300_dcache_inv_range2(unsigned long start, unsigned long size) -{ - unsigned long flags; - - flags = smp_lock_cache(); - mn10300_local_dcache_inv_range2(start, size); - smp_cache_call(SMP_DCACHE_INV_RANGE, start, start + size); - smp_unlock_cache(flags); -} diff --git a/arch/mn10300/mm/cache-smp.c b/arch/mn10300/mm/cache-smp.c deleted file mode 100644 index e80996064d3d..000000000000 --- a/arch/mn10300/mm/cache-smp.c +++ /dev/null @@ -1,105 +0,0 @@ -/* SMP global caching code - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "cache-smp.h" - -DEFINE_SPINLOCK(smp_cache_lock); -static unsigned long smp_cache_mask; -static unsigned long smp_cache_start; -static unsigned long smp_cache_end; -static cpumask_t smp_cache_ipi_map; /* Bitmask of cache IPI done CPUs */ - -/** - * smp_cache_interrupt - Handle IPI request to flush caches. - * - * Handle a request delivered by IPI to flush the current CPU's - * caches. The parameters are stored in smp_cache_*. - */ -void smp_cache_interrupt(void) -{ - unsigned long opr_mask = smp_cache_mask; - - switch ((enum smp_dcache_ops)(opr_mask & SMP_DCACHE_OP_MASK)) { - case SMP_DCACHE_NOP: - break; - case SMP_DCACHE_INV: - mn10300_local_dcache_inv(); - break; - case SMP_DCACHE_INV_RANGE: - mn10300_local_dcache_inv_range(smp_cache_start, smp_cache_end); - break; - case SMP_DCACHE_FLUSH: - mn10300_local_dcache_flush(); - break; - case SMP_DCACHE_FLUSH_RANGE: - mn10300_local_dcache_flush_range(smp_cache_start, - smp_cache_end); - break; - case SMP_DCACHE_FLUSH_INV: - mn10300_local_dcache_flush_inv(); - break; - case SMP_DCACHE_FLUSH_INV_RANGE: - mn10300_local_dcache_flush_inv_range(smp_cache_start, - smp_cache_end); - break; - } - - switch ((enum smp_icache_ops)(opr_mask & SMP_ICACHE_OP_MASK)) { - case SMP_ICACHE_NOP: - break; - case SMP_ICACHE_INV: - mn10300_local_icache_inv(); - break; - case SMP_ICACHE_INV_RANGE: - mn10300_local_icache_inv_range(smp_cache_start, smp_cache_end); - break; - } - - cpumask_clear_cpu(smp_processor_id(), &smp_cache_ipi_map); -} - -/** - * smp_cache_call - Issue an IPI to request the other CPUs flush caches - * @opr_mask: Cache operation flags - * @start: Start address of request - * @end: End address of request - * - * Send cache flush IPI to other CPUs. This invokes smp_cache_interrupt() - * above on those other CPUs and then waits for them to finish. - * - * The caller must hold smp_cache_lock. - */ -void smp_cache_call(unsigned long opr_mask, - unsigned long start, unsigned long end) -{ - smp_cache_mask = opr_mask; - smp_cache_start = start; - smp_cache_end = end; - cpumask_copy(&smp_cache_ipi_map, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &smp_cache_ipi_map); - - send_IPI_allbutself(FLUSH_CACHE_IPI); - - while (!cpumask_empty(&smp_cache_ipi_map)) - /* nothing. lockup detection does not belong here */ - mb(); -} diff --git a/arch/mn10300/mm/cache-smp.h b/arch/mn10300/mm/cache-smp.h deleted file mode 100644 index cb52892aa66a..000000000000 --- a/arch/mn10300/mm/cache-smp.h +++ /dev/null @@ -1,69 +0,0 @@ -/* SMP caching definitions - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - - -/* - * Operation requests for smp_cache_call(). - * - * One of smp_icache_ops and one of smp_dcache_ops can be OR'd together. - */ -enum smp_icache_ops { - SMP_ICACHE_NOP = 0x0000, - SMP_ICACHE_INV = 0x0001, - SMP_ICACHE_INV_RANGE = 0x0002, -}; -#define SMP_ICACHE_OP_MASK 0x0003 - -enum smp_dcache_ops { - SMP_DCACHE_NOP = 0x0000, - SMP_DCACHE_INV = 0x0004, - SMP_DCACHE_INV_RANGE = 0x0008, - SMP_DCACHE_FLUSH = 0x000c, - SMP_DCACHE_FLUSH_RANGE = 0x0010, - SMP_DCACHE_FLUSH_INV = 0x0014, - SMP_DCACHE_FLUSH_INV_RANGE = 0x0018, -}; -#define SMP_DCACHE_OP_MASK 0x001c - -#define SMP_IDCACHE_INV_FLUSH (SMP_ICACHE_INV | SMP_DCACHE_FLUSH) -#define SMP_IDCACHE_INV_FLUSH_RANGE (SMP_ICACHE_INV_RANGE | SMP_DCACHE_FLUSH_RANGE) - -/* - * cache-smp.c - */ -#ifdef CONFIG_SMP -extern spinlock_t smp_cache_lock; - -extern void smp_cache_call(unsigned long opr_mask, - unsigned long addr, unsigned long end); - -static inline unsigned long smp_lock_cache(void) - __acquires(&smp_cache_lock) -{ - unsigned long flags; - spin_lock_irqsave(&smp_cache_lock, flags); - return flags; -} - -static inline void smp_unlock_cache(unsigned long flags) - __releases(&smp_cache_lock) -{ - spin_unlock_irqrestore(&smp_cache_lock, flags); -} - -#else -static inline unsigned long smp_lock_cache(void) { return 0; } -static inline void smp_unlock_cache(unsigned long flags) {} -static inline void smp_cache_call(unsigned long opr_mask, - unsigned long addr, unsigned long end) -{ -} -#endif /* CONFIG_SMP */ diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c deleted file mode 100644 index 0b925cce2b83..000000000000 --- a/arch/mn10300/mm/cache.c +++ /dev/null @@ -1,54 +0,0 @@ -/* MN10300 Cache flushing routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "cache-smp.h" - -EXPORT_SYMBOL(mn10300_icache_inv); -EXPORT_SYMBOL(mn10300_icache_inv_range); -EXPORT_SYMBOL(mn10300_icache_inv_range2); -EXPORT_SYMBOL(mn10300_icache_inv_page); -EXPORT_SYMBOL(mn10300_dcache_inv); -EXPORT_SYMBOL(mn10300_dcache_inv_range); -EXPORT_SYMBOL(mn10300_dcache_inv_range2); -EXPORT_SYMBOL(mn10300_dcache_inv_page); - -#ifdef CONFIG_MN10300_CACHE_WBACK -EXPORT_SYMBOL(mn10300_dcache_flush); -EXPORT_SYMBOL(mn10300_dcache_flush_inv); -EXPORT_SYMBOL(mn10300_dcache_flush_inv_range); -EXPORT_SYMBOL(mn10300_dcache_flush_inv_range2); -EXPORT_SYMBOL(mn10300_dcache_flush_inv_page); -EXPORT_SYMBOL(mn10300_dcache_flush_range); -EXPORT_SYMBOL(mn10300_dcache_flush_range2); -EXPORT_SYMBOL(mn10300_dcache_flush_page); -#endif - -/* - * allow userspace to flush the instruction cache - */ -asmlinkage long sys_cacheflush(unsigned long start, unsigned long end) -{ - if (end < start) - return -EINVAL; - - flush_icache_range(start, end); - return 0; -} diff --git a/arch/mn10300/mm/cache.inc b/arch/mn10300/mm/cache.inc deleted file mode 100644 index 394a119b9c73..000000000000 --- a/arch/mn10300/mm/cache.inc +++ /dev/null @@ -1,133 +0,0 @@ -/* MN10300 CPU core caching macros -*- asm -*- - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - - -############################################################################### -# -# Invalidate the instruction cache. -# A0: Should hold CHCTR -# D0: Should have been read from CHCTR -# D1: Will be clobbered -# -# On some cores it is necessary to disable the icache whilst we do this. -# -############################################################################### - .macro invalidate_icache,disable_irq - -#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) - .if \disable_irq - # don't want an interrupt routine seeing a disabled cache - mov epsw,d1 - and ~EPSW_IE,epsw - or EPSW_NMID,epsw - nop - nop - .endif - - # disable the icache - and ~CHCTR_ICEN,d0 - movhu d0,(a0) - - # and wait for it to calm down - setlb - movhu (a0),d0 - btst CHCTR_ICBUSY,d0 - lne - - # invalidate - or CHCTR_ICINV,d0 - movhu d0,(a0) - - # wait for the cache to finish - setlb - movhu (a0),d0 - btst CHCTR_ICBUSY,d0 - lne - - # and reenable it - or CHCTR_ICEN,d0 - movhu d0,(a0) - movhu (a0),d0 - - .if \disable_irq - LOCAL_IRQ_RESTORE(d1) - .endif - -#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ - - # invalidate - or CHCTR_ICINV,d0 - movhu d0,(a0) - movhu (a0),d0 - -#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ - .endm - -############################################################################### -# -# Invalidate the data cache. -# A0: Should hold CHCTR -# D0: Should have been read from CHCTR -# D1: Will be clobbered -# -# On some cores it is necessary to disable the dcache whilst we do this. -# -############################################################################### - .macro invalidate_dcache,disable_irq - -#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) - .if \disable_irq - # don't want an interrupt routine seeing a disabled cache - mov epsw,d1 - and ~EPSW_IE,epsw - or EPSW_NMID,epsw - nop - nop - .endif - - # disable the dcache - and ~CHCTR_DCEN,d0 - movhu d0,(a0) - - # and wait for it to calm down - setlb - movhu (a0),d0 - btst CHCTR_DCBUSY,d0 - lne - - # invalidate - or CHCTR_DCINV,d0 - movhu d0,(a0) - - # wait for the cache to finish - setlb - movhu (a0),d0 - btst CHCTR_DCBUSY,d0 - lne - - # and reenable it - or CHCTR_DCEN,d0 - movhu d0,(a0) - movhu (a0),d0 - - .if \disable_irq - LOCAL_IRQ_RESTORE(d1) - .endif - -#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ - - # invalidate - or CHCTR_DCINV,d0 - movhu d0,(a0) - movhu (a0),d0 - -#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ - .endm diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c deleted file mode 100644 index e3910d4db102..000000000000 --- a/arch/mn10300/mm/dma-alloc.c +++ /dev/null @@ -1,128 +0,0 @@ -/* MN10300 Dynamic DMA mapping support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * Derived from: arch/i386/kernel/pci-dma.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include - -static unsigned long pci_sram_allocated = 0xbc000000; - -static void *mn10300_dma_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs) -{ - unsigned long addr; - void *ret; - - pr_debug("dma_alloc_coherent(%s,%zu,%x)\n", - dev ? dev_name(dev) : "?", size, gfp); - - if (0xbe000000 - pci_sram_allocated >= size) { - size = (size + 255) & ~255; - addr = pci_sram_allocated; - pci_sram_allocated += size; - ret = (void *) addr; - goto done; - } - - if (dev == NULL || dev->coherent_dma_mask < 0xffffffff) - gfp |= GFP_DMA; - - addr = __get_free_pages(gfp, get_order(size)); - if (!addr) - return NULL; - - /* map the coherent memory through the uncached memory window */ - ret = (void *) (addr | 0x20000000); - - /* fill the memory with obvious rubbish */ - memset((void *) addr, 0xfb, size); - - /* write back and evict all cache lines covering this region */ - mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE); - -done: - *dma_handle = virt_to_bus((void *) addr); - printk("dma_alloc_coherent() = %p [%x]\n", ret, *dma_handle); - return ret; -} - -static void mn10300_dma_free(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle, unsigned long attrs) -{ - unsigned long addr = (unsigned long) vaddr & ~0x20000000; - - if (addr >= 0x9c000000) - return; - - free_pages(addr, get_order(size)); -} - -static int mn10300_dma_map_sg(struct device *dev, struct scatterlist *sglist, - int nents, enum dma_data_direction direction, - unsigned long attrs) -{ - struct scatterlist *sg; - int i; - - for_each_sg(sglist, sg, nents, i) { - BUG_ON(!sg_page(sg)); - - sg->dma_address = sg_phys(sg); - } - - mn10300_dcache_flush_inv(); - return nents; -} - -static dma_addr_t mn10300_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, unsigned long attrs) -{ - return page_to_bus(page) + offset; -} - -static void mn10300_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - -static void mn10300_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - -static int mn10300_dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, so we can't - * guarantee allocations that must be within a tighter range than - * GFP_DMA - */ - if (mask < 0x00ffffff) - return 0; - return 1; -} - -const struct dma_map_ops mn10300_dma_ops = { - .alloc = mn10300_dma_alloc, - .free = mn10300_dma_free, - .map_page = mn10300_dma_map_page, - .map_sg = mn10300_dma_map_sg, - .sync_single_for_device = mn10300_dma_sync_single_for_device, - .sync_sg_for_device = mn10300_dma_sync_sg_for_device, -}; diff --git a/arch/mn10300/mm/extable.c b/arch/mn10300/mm/extable.c deleted file mode 100644 index 045a903ee6b9..000000000000 --- a/arch/mn10300/mm/extable.c +++ /dev/null @@ -1,26 +0,0 @@ -/* MN10300 In-kernel exception handling - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include - -int fixup_exception(struct pt_regs *regs) -{ - const struct exception_table_entry *fixup; - - fixup = search_exception_tables(regs->pc); - if (fixup) { - regs->pc = fixup->fixup; - return 1; - } - - return 0; -} diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c deleted file mode 100644 index f0bfa1448744..000000000000 --- a/arch/mn10300/mm/fault.c +++ /dev/null @@ -1,414 +0,0 @@ -/* MN10300 MMU Fault handler - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* For unblank_screen() */ -#include - -#include -#include -#include -#include -#include - -/* - * Unlock any spinlocks which will prevent us from getting the - * message out - */ -void bust_spinlocks(int yes) -{ - if (yes) { - oops_in_progress = 1; - } else { - int loglevel_save = console_loglevel; -#ifdef CONFIG_VT - unblank_screen(); -#endif - oops_in_progress = 0; - /* - * OK, the message is on the console. Now we call printk() - * without oops_in_progress set so that printk will give klogd - * a poke. Hold onto your hats... - */ - console_loglevel = 15; /* NMI oopser may have shut the console - * up */ - printk(" "); - console_loglevel = loglevel_save; - } -} - -void do_BUG(const char *file, int line) -{ - bust_spinlocks(1); - printk(KERN_EMERG CUT_HERE); - printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line); -} - -#if 0 -static void print_pagetable_entries(pgd_t *pgdir, unsigned long address) -{ - pgd_t *pgd; - pmd_t *pmd; - pte_t *pte; - - pgd = pgdir + __pgd_offset(address); - printk(KERN_DEBUG "pgd entry %p: %016Lx\n", - pgd, (long long) pgd_val(*pgd)); - - if (!pgd_present(*pgd)) { - printk(KERN_DEBUG "... pgd not present!\n"); - return; - } - pmd = pmd_offset(pgd, address); - printk(KERN_DEBUG "pmd entry %p: %016Lx\n", - pmd, (long long)pmd_val(*pmd)); - - if (!pmd_present(*pmd)) { - printk(KERN_DEBUG "... pmd not present!\n"); - return; - } - pte = pte_offset(pmd, address); - printk(KERN_DEBUG "pte entry %p: %016Lx\n", - pte, (long long) pte_val(*pte)); - - if (!pte_present(*pte)) - printk(KERN_DEBUG "... pte not present!\n"); -} -#endif - -/* - * This routine handles page faults. It determines the address, - * and the problem, and then passes it off to one of the appropriate - * routines. - * - * fault_code: - * - LSW: either MMUFCR_IFC or MMUFCR_DFC as appropriate - * - MSW: 0 if data access, 1 if instruction access - * - bit 0: TLB miss flag - * - bit 1: initial write - * - bit 2: page invalid - * - bit 3: protection violation - * - bit 4: accessor (0=user 1=kernel) - * - bit 5: 0=read 1=write - * - bit 6-8: page protection spec - * - bit 9: illegal address - * - bit 16: 0=data 1=ins - * - */ -asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code, - unsigned long address) -{ - struct vm_area_struct *vma; - struct task_struct *tsk; - struct mm_struct *mm; - unsigned long page; - siginfo_t info; - int fault; - unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; - -#ifdef CONFIG_GDBSTUB - /* handle GDB stub causing a fault */ - if (gdbstub_busy) { - gdbstub_exception(regs, TBR & TBR_INT_CODE); - return; - } -#endif - -#if 0 - printk(KERN_DEBUG "--- do_page_fault(%p,%s:%04lx,%08lx)\n", - regs, - fault_code & 0x10000 ? "ins" : "data", - fault_code & 0xffff, address); -#endif - - tsk = current; - - /* - * We fault-in kernel-space virtual memory on-demand. The - * 'reference' page table is init_mm.pgd. - * - * NOTE! We MUST NOT take any locks for this case. We may - * be in an interrupt or a critical region, and should - * only copy the information from the master page table, - * nothing more. - * - * This verifies that the fault happens in kernel space - * and that the fault was a page not present (invalid) error - */ - if (address >= VMALLOC_START && address < VMALLOC_END && - (fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR && - (fault_code & MMUFCR_xFC_PGINVAL) == MMUFCR_xFC_PGINVAL - ) - goto vmalloc_fault; - - mm = tsk->mm; - info.si_code = SEGV_MAPERR; - - /* - * If we're in an interrupt or have no user - * context, we must not take the fault.. - */ - if (faulthandler_disabled() || !mm) - goto no_context; - - if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) - flags |= FAULT_FLAG_USER; -retry: - down_read(&mm->mmap_sem); - - vma = find_vma(mm, address); - if (!vma) - goto bad_area; - if (vma->vm_start <= address) - goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto bad_area; - - if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) { - /* accessing the stack below the stack pointer is always a - * bug */ - if ((address & PAGE_MASK) + 2 * PAGE_SIZE < regs->sp) { -#if 0 - printk(KERN_WARNING - "[%d] ### Access below stack @%lx (sp=%lx)\n", - current->pid, address, regs->sp); - printk(KERN_WARNING - "vma [%08x - %08x]\n", - vma->vm_start, vma->vm_end); - show_registers(regs); - printk(KERN_WARNING - "[%d] ### Code: [%08lx]" - " %02x %02x %02x %02x %02x %02x %02x %02x\n", - current->pid, - regs->pc, - ((u8 *) regs->pc)[0], - ((u8 *) regs->pc)[1], - ((u8 *) regs->pc)[2], - ((u8 *) regs->pc)[3], - ((u8 *) regs->pc)[4], - ((u8 *) regs->pc)[5], - ((u8 *) regs->pc)[6], - ((u8 *) regs->pc)[7] - ); -#endif - goto bad_area; - } - } - - if (expand_stack(vma, address)) - goto bad_area; - -/* - * Ok, we have a good vm_area for this memory access, so - * we can handle it.. - */ -good_area: - info.si_code = SEGV_ACCERR; - switch (fault_code & (MMUFCR_xFC_PGINVAL|MMUFCR_xFC_TYPE)) { - default: /* 3: write, present */ - case MMUFCR_xFC_TYPE_WRITE: -#ifdef TEST_VERIFY_AREA - if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR) - printk(KERN_DEBUG "WP fault at %08lx\n", regs->pc); -#endif - /* write to absent page */ - case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_WRITE: - if (!(vma->vm_flags & VM_WRITE)) - goto bad_area; - flags |= FAULT_FLAG_WRITE; - break; - - /* read from protected page */ - case MMUFCR_xFC_TYPE_READ: - goto bad_area; - - /* read from absent page present */ - case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_READ: - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) - goto bad_area; - break; - } - - /* - * If for any reason at all we couldn't handle the fault, - * make sure we exit gracefully rather than endlessly redo - * the fault. - */ - fault = handle_mm_fault(vma, address, flags); - - if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) - return; - - if (unlikely(fault & VM_FAULT_ERROR)) { - if (fault & VM_FAULT_OOM) - goto out_of_memory; - else if (fault & VM_FAULT_SIGSEGV) - goto bad_area; - else if (fault & VM_FAULT_SIGBUS) - goto do_sigbus; - BUG(); - } - if (flags & FAULT_FLAG_ALLOW_RETRY) { - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; - if (fault & VM_FAULT_RETRY) { - flags &= ~FAULT_FLAG_ALLOW_RETRY; - - /* No need to up_read(&mm->mmap_sem) as we would - * have already released it in __lock_page_or_retry - * in mm/filemap.c. - */ - - goto retry; - } - } - - up_read(&mm->mmap_sem); - return; - -/* - * Something tried to access memory that isn't in our memory map.. - * Fix it, but check if it's kernel or user first.. - */ -bad_area: - up_read(&mm->mmap_sem); - - /* User mode accesses just cause a SIGSEGV */ - if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) { - info.si_signo = SIGSEGV; - info.si_errno = 0; - /* info.si_code has been set above */ - info.si_addr = (void *)address; - force_sig_info(SIGSEGV, &info, tsk); - return; - } - -no_context: - /* Are we prepared to handle this kernel fault? */ - if (fixup_exception(regs)) - return; - -/* - * Oops. The kernel tried to access some bad page. We'll have to - * terminate things with extreme prejudice. - */ - - bust_spinlocks(1); - - if (address < PAGE_SIZE) - printk(KERN_ALERT - "Unable to handle kernel NULL pointer dereference"); - else - printk(KERN_ALERT - "Unable to handle kernel paging request"); - printk(" at virtual address %08lx\n", address); - printk(" printing pc:\n"); - printk(KERN_ALERT "%08lx\n", regs->pc); - - debugger_intercept(fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR, - SIGSEGV, SEGV_ACCERR, regs); - - page = PTBR; - page = ((unsigned long *) __va(page))[address >> 22]; - printk(KERN_ALERT "*pde = %08lx\n", page); - if (page & 1) { - page &= PAGE_MASK; - address &= 0x003ff000; - page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT]; - printk(KERN_ALERT "*pte = %08lx\n", page); - } - - die("Oops", regs, fault_code); - do_exit(SIGKILL); - -/* - * We ran out of memory, or some other thing happened to us that made - * us unable to handle the page fault gracefully. - */ -out_of_memory: - up_read(&mm->mmap_sem); - if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) { - pagefault_out_of_memory(); - return; - } - goto no_context; - -do_sigbus: - up_read(&mm->mmap_sem); - - /* - * Send a sigbus, regardless of whether we were in kernel - * or user mode. - */ - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRERR; - info.si_addr = (void *)address; - force_sig_info(SIGBUS, &info, tsk); - - /* Kernel mode? Handle exceptions or die */ - if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR) - goto no_context; - return; - -vmalloc_fault: - { - /* - * Synchronize this task's top level page-table - * with the 'reference' page table. - * - * Do _not_ use "tsk" here. We might be inside - * an interrupt in the middle of a task switch.. - */ - int index = pgd_index(address); - pgd_t *pgd, *pgd_k; - pud_t *pud, *pud_k; - pmd_t *pmd, *pmd_k; - pte_t *pte_k; - - pgd_k = init_mm.pgd + index; - - if (!pgd_present(*pgd_k)) - goto no_context; - - pud_k = pud_offset(pgd_k, address); - if (!pud_present(*pud_k)) - goto no_context; - - pmd_k = pmd_offset(pud_k, address); - if (!pmd_present(*pmd_k)) - goto no_context; - - pgd = (pgd_t *) PTBR + index; - pud = pud_offset(pgd, address); - pmd = pmd_offset(pud, address); - set_pmd(pmd, *pmd_k); - - pte_k = pte_offset_kernel(pmd_k, address); - if (!pte_present(*pte_k)) - goto no_context; - return; - } -} diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c deleted file mode 100644 index 8ce677d5575e..000000000000 --- a/arch/mn10300/mm/init.c +++ /dev/null @@ -1,136 +0,0 @@ -/* MN10300 Memory management initialisation - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -unsigned long highstart_pfn, highend_pfn; - -#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT -static struct vm_struct user_iomap_vm; -#endif - -/* - * set up paging - */ -void __init paging_init(void) -{ - unsigned long zones_size[MAX_NR_ZONES] = {0,}; - pte_t *ppte; - int loop; - - /* main kernel space -> RAM mapping is handled as 1:1 transparent by - * the MMU */ - memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir)); - memset(kernel_vmalloc_ptes, 0, sizeof(kernel_vmalloc_ptes)); - - /* load the VMALLOC area PTE table addresses into the kernel PGD */ - ppte = kernel_vmalloc_ptes; - for (loop = VMALLOC_START / (PAGE_SIZE * PTRS_PER_PTE); - loop < VMALLOC_END / (PAGE_SIZE * PTRS_PER_PTE); - loop++ - ) { - set_pgd(swapper_pg_dir + loop, __pgd(__pa(ppte) | _PAGE_TABLE)); - ppte += PAGE_SIZE / sizeof(pte_t); - } - - /* declare the sizes of the RAM zones (only use the normal zone) */ - zones_size[ZONE_NORMAL] = - contig_page_data.bdata->node_low_pfn - - contig_page_data.bdata->node_min_pfn; - - /* pass the memory from the bootmem allocator to the main allocator */ - free_area_init(zones_size); - -#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT - /* The Atomic Operation Unit registers need to be mapped to userspace - * for all processes. The following uses vm_area_register_early() to - * reserve the first page of the vmalloc area and sets the pte for that - * page. - * - * glibc hardcodes this virtual mapping, so we're pretty much stuck with - * it from now on. - */ - user_iomap_vm.flags = VM_USERMAP; - user_iomap_vm.size = 1 << PAGE_SHIFT; - vm_area_register_early(&user_iomap_vm, PAGE_SIZE); - ppte = kernel_vmalloc_ptes; - set_pte(ppte, pfn_pte(USER_ATOMIC_OPS_PAGE_ADDR >> PAGE_SHIFT, - PAGE_USERIO)); -#endif - - local_flush_tlb_all(); -} - -/* - * transfer all the memory from the bootmem allocator to the runtime allocator - */ -void __init mem_init(void) -{ - BUG_ON(!mem_map); - -#define START_PFN (contig_page_data.bdata->node_min_pfn) -#define MAX_LOW_PFN (contig_page_data.bdata->node_low_pfn) - - max_mapnr = MAX_LOW_PFN - START_PFN; - high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE); - - /* clear the zero-page */ - memset(empty_zero_page, 0, PAGE_SIZE); - - /* this will put all low memory onto the freelists */ - free_all_bootmem(); - - mem_init_print_info(NULL); -} - -/* - * recycle memory containing stuff only required for initialisation - */ -void free_initmem(void) -{ - free_initmem_default(POISON_FREE_INITMEM); -} - -/* - * dispose of the memory on which the initial ramdisk resided - */ -#ifdef CONFIG_BLK_DEV_INITRD -void free_initrd_mem(unsigned long start, unsigned long end) -{ - free_reserved_area((void *)start, (void *)end, POISON_FREE_INITMEM, - "initrd"); -} -#endif diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c deleted file mode 100644 index 8ace89617c1c..000000000000 --- a/arch/mn10300/mm/misalignment.c +++ /dev/null @@ -1,966 +0,0 @@ -/* MN10300 Misalignment fixup handler - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if 0 -#define kdebug(FMT, ...) printk(KERN_DEBUG "MISALIGN: "FMT"\n", ##__VA_ARGS__) -#else -#define kdebug(FMT, ...) do {} while (0) -#endif - -static int misalignment_addr(unsigned long *registers, unsigned long sp, - unsigned params, unsigned opcode, - unsigned long disp, - void **_address, unsigned long **_postinc, - unsigned long *_inc); - -static int misalignment_reg(unsigned long *registers, unsigned params, - unsigned opcode, unsigned long disp, - unsigned long **_register); - -static void misalignment_MOV_Lcc(struct pt_regs *regs, uint32_t opcode); - -static const unsigned Dreg_index[] = { - REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2 -}; - -static const unsigned Areg_index[] = { - REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2 -}; - -static const unsigned Rreg_index[] = { - REG_E0 >> 2, REG_E1 >> 2, REG_E2 >> 2, REG_E3 >> 2, - REG_E4 >> 2, REG_E5 >> 2, REG_E6 >> 2, REG_E7 >> 2, - REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2, - REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2 -}; - -enum format_id { - FMT_S0, - FMT_S1, - FMT_S2, - FMT_S4, - FMT_D0, - FMT_D1, - FMT_D2, - FMT_D4, - FMT_D6, - FMT_D7, - FMT_D8, - FMT_D9, - FMT_D10, -}; - -static const struct { - u_int8_t opsz, dispsz; -} format_tbl[16] = { - [FMT_S0] = { 8, 0 }, - [FMT_S1] = { 8, 8 }, - [FMT_S2] = { 8, 16 }, - [FMT_S4] = { 8, 32 }, - [FMT_D0] = { 16, 0 }, - [FMT_D1] = { 16, 8 }, - [FMT_D2] = { 16, 16 }, - [FMT_D4] = { 16, 32 }, - [FMT_D6] = { 24, 0 }, - [FMT_D7] = { 24, 8 }, - [FMT_D8] = { 24, 24 }, - [FMT_D9] = { 24, 32 }, - [FMT_D10] = { 32, 0 }, -}; - -enum value_id { - DM0, /* data reg in opcode in bits 0-1 */ - DM1, /* data reg in opcode in bits 2-3 */ - DM2, /* data reg in opcode in bits 4-5 */ - AM0, /* addr reg in opcode in bits 0-1 */ - AM1, /* addr reg in opcode in bits 2-3 */ - AM2, /* addr reg in opcode in bits 4-5 */ - RM0, /* reg in opcode in bits 0-3 */ - RM1, /* reg in opcode in bits 2-5 */ - RM2, /* reg in opcode in bits 4-7 */ - RM4, /* reg in opcode in bits 8-11 */ - RM6, /* reg in opcode in bits 12-15 */ - - RD0, /* reg in displacement in bits 0-3 */ - RD2, /* reg in displacement in bits 4-7 */ - - SP, /* stack pointer */ - - SD8, /* 8-bit signed displacement */ - SD16, /* 16-bit signed displacement */ - SD24, /* 24-bit signed displacement */ - SIMM4_2, /* 4-bit signed displacement in opcode bits 4-7 */ - SIMM8, /* 8-bit signed immediate */ - IMM8, /* 8-bit unsigned immediate */ - IMM16, /* 16-bit unsigned immediate */ - IMM24, /* 24-bit unsigned immediate */ - IMM32, /* 32-bit unsigned immediate */ - IMM32_HIGH8, /* 32-bit unsigned immediate, LSB in opcode */ - - IMM32_MEM, /* 32-bit unsigned displacement */ - IMM32_HIGH8_MEM, /* 32-bit unsigned displacement, LSB in opcode */ - - DN0 = DM0, - DN1 = DM1, - DN2 = DM2, - AN0 = AM0, - AN1 = AM1, - AN2 = AM2, - RN0 = RM0, - RN1 = RM1, - RN2 = RM2, - RN4 = RM4, - RN6 = RM6, - DI = DM1, - RI = RM2, - -}; - -struct mn10300_opcode { - const char name[8]; - u_int32_t opcode; - u_int32_t opmask; - unsigned exclusion; - - enum format_id format; - - unsigned cpu_mask; -#define AM33 330 - - unsigned params[2]; -#define MEM(ADDR) (0x80000000 | (ADDR)) -#define MEM2(ADDR1, ADDR2) (0x80000000 | (ADDR1) << 8 | (ADDR2)) -#define MEMINC(ADDR) (0x81000000 | (ADDR)) -#define MEMINC2(ADDR, INC) (0x81000000 | (ADDR) << 8 | (INC)) -}; - -/* LIBOPCODES EXCERPT - Assemble Matsushita MN10300 instructions. - Copyright 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public Licence as published by - the Free Software Foundation; either version 2 of the Licence, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public Licence for more details. - - You should have received a copy of the GNU General Public Licence - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -*/ -static const struct mn10300_opcode mn10300_opcodes[] = { -{ "mov", 0x4200, 0xf300, 0, FMT_S1, 0, {DM1, MEM2(IMM8, SP)}}, -{ "mov", 0x4300, 0xf300, 0, FMT_S1, 0, {AM1, MEM2(IMM8, SP)}}, -{ "mov", 0x5800, 0xfc00, 0, FMT_S1, 0, {MEM2(IMM8, SP), DN0}}, -{ "mov", 0x5c00, 0xfc00, 0, FMT_S1, 0, {MEM2(IMM8, SP), AN0}}, -{ "mov", 0x60, 0xf0, 0, FMT_S0, 0, {DM1, MEM(AN0)}}, -{ "mov", 0x70, 0xf0, 0, FMT_S0, 0, {MEM(AM0), DN1}}, -{ "mov", 0xf000, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), AN1}}, -{ "mov", 0xf010, 0xfff0, 0, FMT_D0, 0, {AM1, MEM(AN0)}}, -{ "mov", 0xf300, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}}, -{ "mov", 0xf340, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}}, -{ "mov", 0xf380, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), AN2}}, -{ "mov", 0xf3c0, 0xffc0, 0, FMT_D0, 0, {AM2, MEM2(DI, AN0)}}, -{ "mov", 0xf80000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}}, -{ "mov", 0xf81000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}}, -{ "mov", 0xf82000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8,AM0), AN1}}, -{ "mov", 0xf83000, 0xfff000, 0, FMT_D1, 0, {AM1, MEM2(SD8, AN0)}}, -{ "mov", 0xf90a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}}, -{ "mov", 0xf91a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}}, -{ "mov", 0xf96a00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}}, -{ "mov", 0xf97a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}}, -{ "mov", 0xfa000000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}}, -{ "mov", 0xfa100000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}}, -{ "mov", 0xfa200000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), AN1}}, -{ "mov", 0xfa300000, 0xfff00000, 0, FMT_D2, 0, {AM1, MEM2(SD16, AN0)}}, -{ "mov", 0xfa900000, 0xfff30000, 0, FMT_D2, 0, {AM1, MEM2(IMM16, SP)}}, -{ "mov", 0xfa910000, 0xfff30000, 0, FMT_D2, 0, {DM1, MEM2(IMM16, SP)}}, -{ "mov", 0xfab00000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), AN0}}, -{ "mov", 0xfab40000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), DN0}}, -{ "mov", 0xfb0a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}}, -{ "mov", 0xfb1a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}}, -{ "mov", 0xfb6a0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}}, -{ "mov", 0xfb7a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}}, -{ "mov", 0xfb8a0000, 0xffff0f00, 0, FMT_D7, AM33, {MEM2(IMM8, SP), RN2}}, -{ "mov", 0xfb8e0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}}, -{ "mov", 0xfb9a0000, 0xffff0f00, 0, FMT_D7, AM33, {RM2, MEM2(IMM8, SP)}}, -{ "mov", 0xfb9e0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}}, -{ "mov", 0xfc000000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}}, -{ "mov", 0xfc100000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}}, -{ "mov", 0xfc200000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), AN1}}, -{ "mov", 0xfc300000, 0xfff00000, 0, FMT_D4, 0, {AM1, MEM2(IMM32,AN0)}}, -{ "mov", 0xfc800000, 0xfff30000, 0, FMT_D4, 0, {AM1, MEM(IMM32_MEM)}}, -{ "mov", 0xfc810000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM(IMM32_MEM)}}, -{ "mov", 0xfc900000, 0xfff30000, 0, FMT_D4, 0, {AM1, MEM2(IMM32, SP)}}, -{ "mov", 0xfc910000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM2(IMM32, SP)}}, -{ "mov", 0xfca00000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), AN0}}, -{ "mov", 0xfca40000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), DN0}}, -{ "mov", 0xfcb00000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), AN0}}, -{ "mov", 0xfcb40000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), DN0}}, -{ "mov", 0xfd0a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}}, -{ "mov", 0xfd1a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}}, -{ "mov", 0xfd6a0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}}, -{ "mov", 0xfd7a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}}, -{ "mov", 0xfd8a0000, 0xffff0f00, 0, FMT_D8, AM33, {MEM2(IMM24, SP), RN2}}, -{ "mov", 0xfd9a0000, 0xffff0f00, 0, FMT_D8, AM33, {RM2, MEM2(IMM24, SP)}}, -{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, -{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, -{ "mov", 0xfe0e0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM(IMM32_HIGH8_MEM), RN2}}, -{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, -{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, -{ "mov", 0xfe1e0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM(IMM32_HIGH8_MEM)}}, -{ "mov", 0xfe6a0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, -{ "mov", 0xfe7a0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, -{ "mov", 0xfe8a0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8, SP), RN2}}, -{ "mov", 0xfe9a0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, - -{ "movhu", 0xf060, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), DN1}}, -{ "movhu", 0xf070, 0xfff0, 0, FMT_D0, 0, {DM1, MEM(AN0)}}, -{ "movhu", 0xf480, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}}, -{ "movhu", 0xf4c0, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}}, -{ "movhu", 0xf86000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}}, -{ "movhu", 0xf87000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}}, -{ "movhu", 0xf89300, 0xfff300, 0, FMT_D1, 0, {DM1, MEM2(IMM8, SP)}}, -{ "movhu", 0xf8bc00, 0xfffc00, 0, FMT_D1, 0, {MEM2(IMM8, SP), DN0}}, -{ "movhu", 0xf94a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}}, -{ "movhu", 0xf95a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}}, -{ "movhu", 0xf9ea00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}}, -{ "movhu", 0xf9fa00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}}, -{ "movhu", 0xfa600000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}}, -{ "movhu", 0xfa700000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}}, -{ "movhu", 0xfa930000, 0xfff30000, 0, FMT_D2, 0, {DM1, MEM2(IMM16, SP)}}, -{ "movhu", 0xfabc0000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), DN0}}, -{ "movhu", 0xfb4a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}}, -{ "movhu", 0xfb5a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}}, -{ "movhu", 0xfbca0000, 0xffff0f00, 0, FMT_D7, AM33, {MEM2(IMM8, SP), RN2}}, -{ "movhu", 0xfbce0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}}, -{ "movhu", 0xfbda0000, 0xffff0f00, 0, FMT_D7, AM33, {RM2, MEM2(IMM8, SP)}}, -{ "movhu", 0xfbde0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}}, -{ "movhu", 0xfbea0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}}, -{ "movhu", 0xfbfa0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}}, -{ "movhu", 0xfc600000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}}, -{ "movhu", 0xfc700000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}}, -{ "movhu", 0xfc830000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM(IMM32_MEM)}}, -{ "movhu", 0xfc930000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM2(IMM32, SP)}}, -{ "movhu", 0xfcac0000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), DN0}}, -{ "movhu", 0xfcbc0000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), DN0}}, -{ "movhu", 0xfd4a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}}, -{ "movhu", 0xfd5a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}}, -{ "movhu", 0xfdca0000, 0xffff0f00, 0, FMT_D8, AM33, {MEM2(IMM24, SP), RN2}}, -{ "movhu", 0xfdda0000, 0xffff0f00, 0, FMT_D8, AM33, {RM2, MEM2(IMM24, SP)}}, -{ "movhu", 0xfdea0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}}, -{ "movhu", 0xfdfa0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}}, -{ "movhu", 0xfe4a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, -{ "movhu", 0xfe4e0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM(IMM32_HIGH8_MEM), RN2}}, -{ "movhu", 0xfe5a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, -{ "movhu", 0xfe5e0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM(IMM32_HIGH8_MEM)}}, -{ "movhu", 0xfeca0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8, SP), RN2}}, -{ "movhu", 0xfeda0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, -{ "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, -{ "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, - -{ "mov_llt", 0xf7e00000, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lgt", 0xf7e00001, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lge", 0xf7e00002, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lle", 0xf7e00003, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lcs", 0xf7e00004, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lhi", 0xf7e00005, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lcc", 0xf7e00006, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lls", 0xf7e00007, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_leq", 0xf7e00008, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lne", 0xf7e00009, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ "mov_lra", 0xf7e0000a, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, - -{ "", 0, 0, 0, 0, 0, {0}}, -}; - -/* - * fix up misalignment problems where possible - */ -asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) -{ - const struct exception_table_entry *fixup; - const struct mn10300_opcode *pop; - unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc, disp, inc, sp; - mm_segment_t seg; - siginfo_t info; - uint32_t opcode, noc, xo, xm; - uint8_t *pc, byte, datasz; - void *address; - unsigned tmp, npop, dispsz, loop; - - /* we don't fix up userspace misalignment faults */ - if (user_mode(regs)) - goto bus_error; - - sp = (unsigned long) regs + sizeof(*regs); - - kdebug("==>misalignment({pc=%lx,sp=%lx})", regs->pc, sp); - - if (regs->epsw & EPSW_IE) - asm volatile("or %0,epsw" : : "i"(EPSW_IE)); - - seg = get_fs(); - set_fs(KERNEL_DS); - - fixup = search_exception_tables(regs->pc); - - /* first thing to do is to match the opcode */ - pc = (u_int8_t *) regs->pc; - - if (__get_user(byte, pc) != 0) - goto fetch_error; - opcode = byte; - noc = 8; - - for (pop = mn10300_opcodes; pop->name[0]; pop++) { - npop = ilog2(pop->opcode | pop->opmask); - if (npop <= 0 || npop > 31) - continue; - npop = (npop + 8) & ~7; - - got_more_bits: - if (npop == noc) { - if ((opcode & pop->opmask) == pop->opcode) - goto found_opcode; - } else if (npop > noc) { - xo = pop->opcode >> (npop - noc); - xm = pop->opmask >> (npop - noc); - - if ((opcode & xm) != xo) - continue; - - /* we've got a partial match (an exact match on the - * first N bytes), so we need to get some more data */ - pc++; - if (__get_user(byte, pc) != 0) - goto fetch_error; - opcode = opcode << 8 | byte; - noc += 8; - goto got_more_bits; - } else { - /* there's already been a partial match as long as the - * complete match we're now considering, so this one - * should't match */ - continue; - } - } - - /* didn't manage to find a fixup */ - printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n", - regs->pc, opcode); - -failed: - set_fs(seg); - if (die_if_no_fixup("misalignment error", regs, code)) - return; - -bus_error: - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRALN; - info.si_addr = (void *) regs->pc; - force_sig_info(SIGBUS, &info, current); - return; - - /* error reading opcodes */ -fetch_error: - printk(KERN_CRIT - "MISALIGN: %p: fault whilst reading instruction data\n", - pc); - goto failed; - -bad_addr_mode: - printk(KERN_CRIT - "MISALIGN: %lx: unsupported addressing mode %x\n", - regs->pc, opcode); - goto failed; - -bad_reg_mode: - printk(KERN_CRIT - "MISALIGN: %lx: unsupported register mode %x\n", - regs->pc, opcode); - goto failed; - -unsupported_instruction: - printk(KERN_CRIT - "MISALIGN: %lx: unsupported instruction %x (%s)\n", - regs->pc, opcode, pop->name); - goto failed; - -transfer_failed: - set_fs(seg); - if (fixup) { - regs->pc = fixup->fixup; - return; - } - if (die_if_no_fixup("misalignment fixup", regs, code)) - return; - - info.si_signo = SIGSEGV; - info.si_errno = 0; - info.si_code = SEGV_MAPERR; - info.si_addr = (void *) regs->pc; - force_sig_info(SIGSEGV, &info, current); - return; - - /* we matched the opcode */ -found_opcode: - kdebug("%lx: %x==%x { %x, %x }", - regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]); - - tmp = format_tbl[pop->format].opsz; - BUG_ON(tmp > noc); /* match was less complete than it ought to have been */ - - if (tmp < noc) { - tmp = noc - tmp; - opcode >>= tmp; - pc -= tmp >> 3; - } - - /* grab the extra displacement (note it's LSB first) */ - disp = 0; - dispsz = format_tbl[pop->format].dispsz; - for (loop = 0; loop < dispsz; loop += 8) { - pc++; - if (__get_user(byte, pc) != 0) - goto fetch_error; - disp |= byte << loop; - kdebug("{%p} disp[%02x]=%02x", pc, loop, byte); - } - - kdebug("disp=%lx", disp); - - set_fs(KERNEL_XDS); - if (fixup) - set_fs(seg); - - tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000; - if (!tmp) { - printk(KERN_CRIT - "MISALIGN: %lx: insn not move to/from memory %x\n", - regs->pc, opcode); - goto failed; - } - - /* determine the data transfer size of the move */ - if (pop->name[3] == 0 || /* "mov" */ - pop->name[4] == 'l') /* mov_lcc */ - inc = datasz = 4; - else if (pop->name[3] == 'h') /* movhu */ - inc = datasz = 2; - else - goto unsupported_instruction; - - if (pop->params[0] & 0x80000000) { - /* move memory to register */ - if (!misalignment_addr(registers, sp, - pop->params[0], opcode, disp, - &address, &postinc, &inc)) - goto bad_addr_mode; - - if (!misalignment_reg(registers, pop->params[1], opcode, disp, - &store)) - goto bad_reg_mode; - - kdebug("mov%u (%p),DARn", datasz, address); - if (copy_from_user(&data, (void *) address, datasz) != 0) - goto transfer_failed; - if (pop->params[0] & 0x1000000) { - kdebug("inc=%lx", inc); - *postinc += inc; - } - - *store = data; - kdebug("loaded %lx", data); - } else { - /* move register to memory */ - if (!misalignment_reg(registers, pop->params[0], opcode, disp, - &store)) - goto bad_reg_mode; - - if (!misalignment_addr(registers, sp, - pop->params[1], opcode, disp, - &address, &postinc, &inc)) - goto bad_addr_mode; - - data = *store; - - kdebug("mov%u %lx,(%p)", datasz, data, address); - if (copy_to_user((void *) address, &data, datasz) != 0) - goto transfer_failed; - if (pop->params[1] & 0x1000000) - *postinc += inc; - } - - tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz; - regs->pc += tmp >> 3; - - /* handle MOV_Lcc, which are currently the only FMT_D10 insns that - * access memory */ - if (pop->format == FMT_D10) - misalignment_MOV_Lcc(regs, opcode); - - set_fs(seg); -} - -/* - * determine the address that was being accessed - */ -static int misalignment_addr(unsigned long *registers, unsigned long sp, - unsigned params, unsigned opcode, - unsigned long disp, - void **_address, unsigned long **_postinc, - unsigned long *_inc) -{ - unsigned long *postinc = NULL, address = 0, tmp; - - if (!(params & 0x1000000)) { - kdebug("noinc"); - *_inc = 0; - _inc = NULL; - } - - params &= 0x00ffffff; - - do { - switch (params & 0xff) { - case DM0: - postinc = ®isters[Dreg_index[opcode & 0x03]]; - address += *postinc; - break; - case DM1: - postinc = ®isters[Dreg_index[opcode >> 2 & 0x03]]; - address += *postinc; - break; - case DM2: - postinc = ®isters[Dreg_index[opcode >> 4 & 0x03]]; - address += *postinc; - break; - case AM0: - postinc = ®isters[Areg_index[opcode & 0x03]]; - address += *postinc; - break; - case AM1: - postinc = ®isters[Areg_index[opcode >> 2 & 0x03]]; - address += *postinc; - break; - case AM2: - postinc = ®isters[Areg_index[opcode >> 4 & 0x03]]; - address += *postinc; - break; - case RM0: - postinc = ®isters[Rreg_index[opcode & 0x0f]]; - address += *postinc; - break; - case RM1: - postinc = ®isters[Rreg_index[opcode >> 2 & 0x0f]]; - address += *postinc; - break; - case RM2: - postinc = ®isters[Rreg_index[opcode >> 4 & 0x0f]]; - address += *postinc; - break; - case RM4: - postinc = ®isters[Rreg_index[opcode >> 8 & 0x0f]]; - address += *postinc; - break; - case RM6: - postinc = ®isters[Rreg_index[opcode >> 12 & 0x0f]]; - address += *postinc; - break; - case RD0: - postinc = ®isters[Rreg_index[disp & 0x0f]]; - address += *postinc; - break; - case RD2: - postinc = ®isters[Rreg_index[disp >> 4 & 0x0f]]; - address += *postinc; - break; - case SP: - address += sp; - break; - - /* displacements are either to be added to the address - * before use, or, in the case of post-inc addressing, - * to be added into the base register after use */ - case SD8: - case SIMM8: - disp = (long) (int8_t) (disp & 0xff); - goto displace_or_inc; - case SD16: - disp = (long) (int16_t) (disp & 0xffff); - goto displace_or_inc; - case SD24: - tmp = disp << 8; - asm("asr 8,%0" : "=r"(tmp) : "0"(tmp) : "cc"); - disp = (long) tmp; - goto displace_or_inc; - case SIMM4_2: - tmp = opcode >> 4 & 0x0f; - tmp <<= 28; - asm("asr 28,%0" : "=r"(tmp) : "0"(tmp) : "cc"); - disp = (long) tmp; - goto displace_or_inc; - case IMM8: - disp &= 0x000000ff; - goto displace_or_inc; - case IMM16: - disp &= 0x0000ffff; - goto displace_or_inc; - case IMM24: - disp &= 0x00ffffff; - goto displace_or_inc; - case IMM32: - case IMM32_MEM: - case IMM32_HIGH8: - case IMM32_HIGH8_MEM: - displace_or_inc: - kdebug("%s %lx", _inc ? "incr" : "disp", disp); - if (!_inc) - address += disp; - else - *_inc = disp; - break; - default: - BUG(); - return 0; - } - } while ((params >>= 8)); - - *_address = (void *) address; - *_postinc = postinc; - return 1; -} - -/* - * determine the register that is acting as source/dest - */ -static int misalignment_reg(unsigned long *registers, unsigned params, - unsigned opcode, unsigned long disp, - unsigned long **_register) -{ - params &= 0x7fffffff; - - if (params & 0xffffff00) - return 0; - - switch (params & 0xff) { - case DM0: - *_register = ®isters[Dreg_index[opcode & 0x03]]; - break; - case DM1: - *_register = ®isters[Dreg_index[opcode >> 2 & 0x03]]; - break; - case DM2: - *_register = ®isters[Dreg_index[opcode >> 4 & 0x03]]; - break; - case AM0: - *_register = ®isters[Areg_index[opcode & 0x03]]; - break; - case AM1: - *_register = ®isters[Areg_index[opcode >> 2 & 0x03]]; - break; - case AM2: - *_register = ®isters[Areg_index[opcode >> 4 & 0x03]]; - break; - case RM0: - *_register = ®isters[Rreg_index[opcode & 0x0f]]; - break; - case RM1: - *_register = ®isters[Rreg_index[opcode >> 2 & 0x0f]]; - break; - case RM2: - *_register = ®isters[Rreg_index[opcode >> 4 & 0x0f]]; - break; - case RM4: - *_register = ®isters[Rreg_index[opcode >> 8 & 0x0f]]; - break; - case RM6: - *_register = ®isters[Rreg_index[opcode >> 12 & 0x0f]]; - break; - case RD0: - *_register = ®isters[Rreg_index[disp & 0x0f]]; - break; - case RD2: - *_register = ®isters[Rreg_index[disp >> 4 & 0x0f]]; - break; - case SP: - *_register = ®isters[REG_SP >> 2]; - break; - - default: - BUG(); - return 0; - } - - return 1; -} - -/* - * handle the conditional loop part of the move-and-loop instructions - */ -static void misalignment_MOV_Lcc(struct pt_regs *regs, uint32_t opcode) -{ - unsigned long epsw = regs->epsw; - unsigned long NxorV; - - kdebug("MOV_Lcc %x [flags=%lx]", opcode, epsw & 0xf); - - /* calculate N^V and shift onto the same bit position as Z */ - NxorV = ((epsw >> 3) ^ epsw >> 1) & 1; - - switch (opcode & 0xf) { - case 0x0: /* MOV_LLT: N^V */ - if (NxorV) - goto take_the_loop; - return; - case 0x1: /* MOV_LGT: ~(Z or (N^V))*/ - if (!((epsw & EPSW_FLAG_Z) | NxorV)) - goto take_the_loop; - return; - case 0x2: /* MOV_LGE: ~(N^V) */ - if (!NxorV) - goto take_the_loop; - return; - case 0x3: /* MOV_LLE: Z or (N^V) */ - if ((epsw & EPSW_FLAG_Z) | NxorV) - goto take_the_loop; - return; - - case 0x4: /* MOV_LCS: C */ - if (epsw & EPSW_FLAG_C) - goto take_the_loop; - return; - case 0x5: /* MOV_LHI: ~(C or Z) */ - if (!(epsw & (EPSW_FLAG_C | EPSW_FLAG_Z))) - goto take_the_loop; - return; - case 0x6: /* MOV_LCC: ~C */ - if (!(epsw & EPSW_FLAG_C)) - goto take_the_loop; - return; - case 0x7: /* MOV_LLS: C or Z */ - if (epsw & (EPSW_FLAG_C | EPSW_FLAG_Z)) - goto take_the_loop; - return; - - case 0x8: /* MOV_LEQ: Z */ - if (epsw & EPSW_FLAG_Z) - goto take_the_loop; - return; - case 0x9: /* MOV_LNE: ~Z */ - if (!(epsw & EPSW_FLAG_Z)) - goto take_the_loop; - return; - case 0xa: /* MOV_LRA: always */ - goto take_the_loop; - - default: - BUG(); - } - -take_the_loop: - /* wind the PC back to just after the SETLB insn */ - kdebug("loop LAR=%lx", regs->lar); - regs->pc = regs->lar - 4; -} - -/* - * misalignment handler tests - */ -#ifdef CONFIG_TEST_MISALIGNMENT_HANDLER -static u8 __initdata testbuf[512] __attribute__((aligned(16))) = { - [257] = 0x11, - [258] = 0x22, - [259] = 0x33, - [260] = 0x44, -}; - -#define ASSERTCMP(X, OP, Y) \ -do { \ - if (unlikely(!((X) OP (Y)))) { \ - printk(KERN_ERR "\n"); \ - printk(KERN_ERR "MISALIGN: Assertion failed at line %u\n", \ - __LINE__); \ - printk(KERN_ERR "0x%lx " #OP " 0x%lx is false\n", \ - (unsigned long)(X), (unsigned long)(Y)); \ - BUG(); \ - } \ -} while(0) - -static int __init test_misalignment(void) -{ - register void *r asm("e0"); - register u32 y asm("e1"); - void *p = testbuf, *q; - u32 tmp, tmp2, x; - - printk(KERN_NOTICE "==>test_misalignment() [testbuf=%p]\n", p); - p++; - - printk(KERN_NOTICE "___ MOV (Am),Dn ___\n"); - q = p + 256; - asm volatile("mov (%0),%1" : "+a"(q), "=d"(x)); - ASSERTCMP(q, ==, p + 256); - ASSERTCMP(x, ==, 0x44332211); - - printk(KERN_NOTICE "___ MOV (256,Am),Dn ___\n"); - q = p; - asm volatile("mov (256,%0),%1" : "+a"(q), "=d"(x)); - ASSERTCMP(q, ==, p); - ASSERTCMP(x, ==, 0x44332211); - - printk(KERN_NOTICE "___ MOV (Di,Am),Dn ___\n"); - tmp = 256; - q = p; - asm volatile("mov (%2,%0),%1" : "+a"(q), "=d"(x), "+d"(tmp)); - ASSERTCMP(q, ==, p); - ASSERTCMP(x, ==, 0x44332211); - ASSERTCMP(tmp, ==, 256); - - printk(KERN_NOTICE "___ MOV (256,Rm),Rn ___\n"); - r = p; - asm volatile("mov (256,%0),%1" : "+r"(r), "=r"(y)); - ASSERTCMP(r, ==, p); - ASSERTCMP(y, ==, 0x44332211); - - printk(KERN_NOTICE "___ MOV (Rm+),Rn ___\n"); - r = p + 256; - asm volatile("mov (%0+),%1" : "+r"(r), "=r"(y)); - ASSERTCMP(r, ==, p + 256 + 4); - ASSERTCMP(y, ==, 0x44332211); - - printk(KERN_NOTICE "___ MOV (Rm+,8),Rn ___\n"); - r = p + 256; - asm volatile("mov (%0+,8),%1" : "+r"(r), "=r"(y)); - ASSERTCMP(r, ==, p + 256 + 8); - ASSERTCMP(y, ==, 0x44332211); - - printk(KERN_NOTICE "___ MOV (7,SP),Rn ___\n"); - asm volatile( - "add -16,sp \n" - "mov +0x11,%0 \n" - "movbu %0,(7,sp) \n" - "mov +0x22,%0 \n" - "movbu %0,(8,sp) \n" - "mov +0x33,%0 \n" - "movbu %0,(9,sp) \n" - "mov +0x44,%0 \n" - "movbu %0,(10,sp) \n" - "mov (7,sp),%1 \n" - "add +16,sp \n" - : "+a"(q), "=d"(x)); - ASSERTCMP(x, ==, 0x44332211); - - printk(KERN_NOTICE "___ MOV (259,SP),Rn ___\n"); - asm volatile( - "add -264,sp \n" - "mov +0x11,%0 \n" - "movbu %0,(259,sp) \n" - "mov +0x22,%0 \n" - "movbu %0,(260,sp) \n" - "mov +0x33,%0 \n" - "movbu %0,(261,sp) \n" - "mov +0x55,%0 \n" - "movbu %0,(262,sp) \n" - "mov (259,sp),%1 \n" - "add +264,sp \n" - : "+d"(tmp), "=d"(x)); - ASSERTCMP(x, ==, 0x55332211); - - printk(KERN_NOTICE "___ MOV (260,SP),Rn ___\n"); - asm volatile( - "add -264,sp \n" - "mov +0x11,%0 \n" - "movbu %0,(260,sp) \n" - "mov +0x22,%0 \n" - "movbu %0,(261,sp) \n" - "mov +0x33,%0 \n" - "movbu %0,(262,sp) \n" - "mov +0x55,%0 \n" - "movbu %0,(263,sp) \n" - "mov (260,sp),%1 \n" - "add +264,sp \n" - : "+d"(tmp), "=d"(x)); - ASSERTCMP(x, ==, 0x55332211); - - - printk(KERN_NOTICE "___ MOV_LNE ___\n"); - tmp = 1; - tmp2 = 2; - q = p + 256; - asm volatile( - "setlb \n" - "mov %2,%3 \n" - "mov %1,%2 \n" - "cmp +0,%1 \n" - "mov_lne (%0+,4),%1" - : "+r"(q), "+d"(tmp), "+d"(tmp2), "=d"(x) - : - : "cc"); - ASSERTCMP(q, ==, p + 256 + 12); - ASSERTCMP(x, ==, 0x44332211); - - printk(KERN_NOTICE "___ MOV in SETLB ___\n"); - tmp = 1; - tmp2 = 2; - q = p + 256; - asm volatile( - "setlb \n" - "mov %1,%3 \n" - "mov (%0+),%1 \n" - "cmp +0,%1 \n" - "lne " - : "+a"(q), "+d"(tmp), "+d"(tmp2), "=d"(x) - : - : "cc"); - - ASSERTCMP(q, ==, p + 256 + 8); - ASSERTCMP(x, ==, 0x44332211); - - printk(KERN_NOTICE "<==test_misalignment()\n"); - return 0; -} - -arch_initcall(test_misalignment); - -#endif /* CONFIG_TEST_MISALIGNMENT_HANDLER */ diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c deleted file mode 100644 index a4f7d3dcc6e6..000000000000 --- a/arch/mn10300/mm/mmu-context.c +++ /dev/null @@ -1,62 +0,0 @@ -/* MN10300 MMU context allocation and management - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include - -#ifdef CONFIG_MN10300_TLB_USE_PIDR -/* - * list of the MMU contexts last allocated on each CPU - */ -unsigned long mmu_context_cache[NR_CPUS] = { - [0 ... NR_CPUS - 1] = - MMU_CONTEXT_FIRST_VERSION * 2 - (1 - MMU_CONTEXT_TLBPID_LOCK_NR), -}; -#endif /* CONFIG_MN10300_TLB_USE_PIDR */ - -/* - * preemptively set a TLB entry - */ -void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) -{ - unsigned long pteu, ptel, cnx, flags; - pte_t pte = *ptep; - - addr &= PAGE_MASK; - ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2); - - /* make sure the context doesn't migrate and defend against - * interference from vmalloc'd regions */ - local_irq_save(flags); - - cnx = ~MMU_NO_CONTEXT; -#ifdef CONFIG_MN10300_TLB_USE_PIDR - cnx = mm_context(vma->vm_mm); -#endif - - if (cnx != MMU_NO_CONTEXT) { - pteu = addr; -#ifdef CONFIG_MN10300_TLB_USE_PIDR - pteu |= cnx & MMU_CONTEXT_TLBPID_MASK; -#endif - if (!(pte_val(pte) & _PAGE_NX)) { - IPTEU = pteu; - if (IPTEL & xPTEL_V) - IPTEL = ptel; - } - DPTEU = pteu; - if (DPTEL & xPTEL_V) - DPTEL = ptel; - } - - local_irq_restore(flags); -} diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c deleted file mode 100644 index 9577cf768875..000000000000 --- a/arch/mn10300/mm/pgtable.c +++ /dev/null @@ -1,174 +0,0 @@ -/* MN10300 Page table management - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * Associate a large virtual page frame with a given physical page frame - * and protection flags for that frame. pfn is for the base of the page, - * vaddr is what the page gets mapped to - both must be properly aligned. - * The pmd must already be instantiated. Assumes PAE mode. - */ -void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - - if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */ - printk(KERN_ERR "set_pmd_pfn: vaddr misaligned\n"); - return; /* BUG(); */ - } - if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */ - printk(KERN_ERR "set_pmd_pfn: pfn misaligned\n"); - return; /* BUG(); */ - } - pgd = swapper_pg_dir + pgd_index(vaddr); - if (pgd_none(*pgd)) { - printk(KERN_ERR "set_pmd_pfn: pgd_none\n"); - return; /* BUG(); */ - } - pud = pud_offset(pgd, vaddr); - pmd = pmd_offset(pud, vaddr); - set_pmd(pmd, pfn_pmd(pfn, flags)); - /* - * It's enough to flush this one mapping. - * (PGE mappings get flushed as well) - */ - local_flush_tlb_one(vaddr); -} - -pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL); - if (pte) - clear_page(pte); - return pte; -} - -struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) -{ - struct page *pte; - -#ifdef CONFIG_HIGHPTE - pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM, 0); -#else - pte = alloc_pages(GFP_KERNEL, 0); -#endif - if (!pte) - return NULL; - clear_highpage(pte); - if (!pgtable_page_ctor(pte)) { - __free_page(pte); - return NULL; - } - return pte; -} - -/* - * List of all pgd's needed for non-PAE so it can invalidate entries - * in both cached and uncached pgd's; not needed for PAE since the - * kernel pmd is shared. If PAE were not to share the pmd a similar - * tactic would be needed. This is essentially codepath-based locking - * against pageattr.c; it is the unique case in which a valid change - * of kernel pagetables can't be lazily synchronized by vmalloc faults. - * vmalloc faults work because attached pagetables are never freed. - * If the locking proves to be non-performant, a ticketing scheme with - * checks at dup_mmap(), exec(), and other mmlist addition points - * could be used. The locking scheme was chosen on the basis of - * manfred's recommendations and having no core impact whatsoever. - * -- nyc - */ -DEFINE_SPINLOCK(pgd_lock); -struct page *pgd_list; - -static inline void pgd_list_add(pgd_t *pgd) -{ - struct page *page = virt_to_page(pgd); - page->index = (unsigned long) pgd_list; - if (pgd_list) - set_page_private(pgd_list, (unsigned long) &page->index); - pgd_list = page; - set_page_private(page, (unsigned long) &pgd_list); -} - -static inline void pgd_list_del(pgd_t *pgd) -{ - struct page *next, **pprev, *page = virt_to_page(pgd); - next = (struct page *) page->index; - pprev = (struct page **) page_private(page); - *pprev = next; - if (next) - set_page_private(next, (unsigned long) pprev); -} - -void pgd_ctor(void *pgd) -{ - unsigned long flags; - - if (PTRS_PER_PMD == 1) - spin_lock_irqsave(&pgd_lock, flags); - - memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD, - swapper_pg_dir + USER_PTRS_PER_PGD, - (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); - - if (PTRS_PER_PMD > 1) - return; - - pgd_list_add(pgd); - spin_unlock_irqrestore(&pgd_lock, flags); - memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t)); -} - -/* never called when PTRS_PER_PMD > 1 */ -void pgd_dtor(void *pgd) -{ - unsigned long flags; /* can be called from interrupt context */ - - spin_lock_irqsave(&pgd_lock, flags); - pgd_list_del(pgd); - spin_unlock_irqrestore(&pgd_lock, flags); -} - -pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return quicklist_alloc(0, GFP_KERNEL, pgd_ctor); -} - -void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - quicklist_free(0, pgd_dtor, pgd); -} - -void __init pgtable_cache_init(void) -{ -} - -void check_pgt_cache(void) -{ - quicklist_trim(0, pgd_dtor, 25, 16); -} diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S deleted file mode 100644 index b9940177d81b..000000000000 --- a/arch/mn10300/mm/tlb-mn10300.S +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################### -# -# TLB loading functions -# -# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. -# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. -# Modified by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public Licence -# as published by the Free Software Foundation; either version -# 2 of the Licence, or (at your option) any later version. -# -############################################################################### -#include -#include -#include -#include -#include -#include -#include - -############################################################################### -# -# Instruction TLB Miss handler entry point -# -############################################################################### - .type itlb_miss,@function -ENTRY(itlb_miss) -#ifdef CONFIG_GDBSTUB - movm [d2,d3,a2],(sp) -#else - or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate - # register bank - nop - nop - nop -#endif - -#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) - mov (MMUCTR),d2 - mov d2,(MMUCTR) -#endif - - and ~EPSW_NMID,epsw - mov (IPTEU),d3 - mov (PTBR),a2 - mov d3,d2 - and 0xffc00000,d2 - lsr 20,d2 - mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22] - btst _PAGE_VALID,a2 - beq itlb_miss_fault # jump if doesn't point anywhere - - and ~(PAGE_SIZE-1),a2 - mov d3,d2 - and 0x003ff000,d2 - lsr 10,d2 - add d2,a2 - mov (a2),d2 # get pte from PTD[addr 21..12] - btst _PAGE_VALID,d2 - beq itlb_miss_fault # jump if doesn't point to a page - # (might be a swap id) -#if ((_PAGE_ACCESSED & 0xffffff00) == 0) - bset _PAGE_ACCESSED,(0,a2) -#elif ((_PAGE_ACCESSED & 0xffff00ff) == 0) - bset +(_PAGE_ACCESSED >> 8),(1,a2) -#else -#error "_PAGE_ACCESSED value is out of range" -#endif - and ~xPTEL2_UNUSED1,d2 -itlb_miss_set: - mov d2,(IPTEL2) # change the TLB -#ifdef CONFIG_GDBSTUB - movm (sp),[d2,d3,a2] -#endif - rti - -itlb_miss_fault: - mov _PAGE_VALID,d2 # force address error handler to be - # invoked - bra itlb_miss_set - - .size itlb_miss, . - itlb_miss - -############################################################################### -# -# Data TLB Miss handler entry point -# -############################################################################### - .type dtlb_miss,@function -ENTRY(dtlb_miss) -#ifdef CONFIG_GDBSTUB - movm [d2,d3,a2],(sp) -#else - or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate - # register bank - nop - nop - nop -#endif - -#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) - mov (MMUCTR),d2 - mov d2,(MMUCTR) -#endif - - and ~EPSW_NMID,epsw - mov (DPTEU),d3 - mov (PTBR),a2 - mov d3,d2 - and 0xffc00000,d2 - lsr 20,d2 - mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22] - btst _PAGE_VALID,a2 - beq dtlb_miss_fault # jump if doesn't point anywhere - - and ~(PAGE_SIZE-1),a2 - mov d3,d2 - and 0x003ff000,d2 - lsr 10,d2 - add d2,a2 - mov (a2),d2 # get pte from PTD[addr 21..12] - btst _PAGE_VALID,d2 - beq dtlb_miss_fault # jump if doesn't point to a page - # (might be a swap id) -#if ((_PAGE_ACCESSED & 0xffffff00) == 0) - bset _PAGE_ACCESSED,(0,a2) -#elif ((_PAGE_ACCESSED & 0xffff00ff) == 0) - bset +(_PAGE_ACCESSED >> 8),(1,a2) -#else -#error "_PAGE_ACCESSED value is out of range" -#endif - and ~xPTEL2_UNUSED1,d2 -dtlb_miss_set: - mov d2,(DPTEL2) # change the TLB -#ifdef CONFIG_GDBSTUB - movm (sp),[d2,d3,a2] -#endif - rti - -dtlb_miss_fault: - mov _PAGE_VALID,d2 # force address error handler to be - # invoked - bra dtlb_miss_set - .size dtlb_miss, . - dtlb_miss - -############################################################################### -# -# Instruction TLB Address Error handler entry point -# -############################################################################### - .type itlb_aerror,@function -ENTRY(itlb_aerror) - add -4,sp - SAVE_ALL - -#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) - mov (MMUCTR),d1 - mov d1,(MMUCTR) -#endif - - and ~EPSW_NMID,epsw - add -4,sp # need to pass three params - - # calculate the fault code - movhu (MMUFCR_IFC),d1 - or 0x00010000,d1 # it's an instruction fetch - - # determine the page address - mov (IPTEU),d0 - and PAGE_MASK,d0 - mov d0,(12,sp) - - clr d0 - mov d0,(IPTEL2) - - or EPSW_IE,epsw - mov fp,d0 - call do_page_fault[],0 # do_page_fault(regs,code,addr - - jmp ret_from_exception - .size itlb_aerror, . - itlb_aerror - -############################################################################### -# -# Data TLB Address Error handler entry point -# -############################################################################### - .type dtlb_aerror,@function -ENTRY(dtlb_aerror) - add -4,sp - SAVE_ALL - -#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) - mov (MMUCTR),d1 - mov d1,(MMUCTR) -#endif - - add -4,sp # need to pass three params - and ~EPSW_NMID,epsw - - # calculate the fault code - movhu (MMUFCR_DFC),d1 - - # determine the page address - mov (DPTEU),a2 - mov a2,d0 - and PAGE_MASK,d0 - mov d0,(12,sp) - - clr d0 - mov d0,(DPTEL2) - - or EPSW_IE,epsw - mov fp,d0 - call do_page_fault[],0 # do_page_fault(regs,code,addr - - jmp ret_from_exception - .size dtlb_aerror, . - dtlb_aerror diff --git a/arch/mn10300/mm/tlb-smp.c b/arch/mn10300/mm/tlb-smp.c deleted file mode 100644 index 085f2bb691ac..000000000000 --- a/arch/mn10300/mm/tlb-smp.c +++ /dev/null @@ -1,213 +0,0 @@ -/* SMP TLB support routines. - * - * Copyright (C) 2006-2008 Panasonic Corporation - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * For flush TLB - */ -#define FLUSH_ALL 0xffffffff - -static cpumask_t flush_cpumask; -static struct mm_struct *flush_mm; -static unsigned long flush_va; -static DEFINE_SPINLOCK(tlbstate_lock); - -DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { - &init_mm, 0 -}; - -static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, - unsigned long va); -static void do_flush_tlb_all(void *info); - -/** - * smp_flush_tlb - Callback to invalidate the TLB. - * @unused: Callback context (ignored). - */ -void smp_flush_tlb(void *unused) -{ - unsigned long cpu_id; - - cpu_id = get_cpu(); - - if (!cpumask_test_cpu(cpu_id, &flush_cpumask)) - /* This was a BUG() but until someone can quote me the line - * from the intel manual that guarantees an IPI to multiple - * CPUs is retried _only_ on the erroring CPUs its staying as a - * return - * - * BUG(); - */ - goto out; - - if (flush_va == FLUSH_ALL) - local_flush_tlb(); - else - local_flush_tlb_page(flush_mm, flush_va); - - smp_mb__before_atomic(); - cpumask_clear_cpu(cpu_id, &flush_cpumask); - smp_mb__after_atomic(); -out: - put_cpu(); -} - -/** - * flush_tlb_others - Tell the specified CPUs to invalidate their TLBs - * @cpumask: The list of CPUs to target. - * @mm: The VM context to flush from (if va!=FLUSH_ALL). - * @va: Virtual address to flush or FLUSH_ALL to flush everything. - */ -static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, - unsigned long va) -{ - cpumask_t tmp; - - /* A couple of sanity checks (to be removed): - * - mask must not be empty - * - current CPU must not be in mask - * - we do not send IPIs to as-yet unbooted CPUs. - */ - BUG_ON(!mm); - BUG_ON(cpumask_empty(&cpumask)); - BUG_ON(cpumask_test_cpu(smp_processor_id(), &cpumask)); - - cpumask_and(&tmp, &cpumask, cpu_online_mask); - BUG_ON(!cpumask_equal(&cpumask, &tmp)); - - /* I'm not happy about this global shared spinlock in the MM hot path, - * but we'll see how contended it is. - * - * Temporarily this turns IRQs off, so that lockups are detected by the - * NMI watchdog. - */ - spin_lock(&tlbstate_lock); - - flush_mm = mm; - flush_va = va; -#if NR_CPUS <= BITS_PER_LONG - atomic_or(cpumask.bits[0], (atomic_t *)&flush_cpumask.bits[0]); -#else -#error Not supported. -#endif - - /* FIXME: if NR_CPUS>=3, change send_IPI_mask */ - smp_call_function(smp_flush_tlb, NULL, 1); - - while (!cpumask_empty(&flush_cpumask)) - /* Lockup detection does not belong here */ - smp_mb(); - - flush_mm = NULL; - flush_va = 0; - spin_unlock(&tlbstate_lock); -} - -/** - * flush_tlb_mm - Invalidate TLB of specified VM context - * @mm: The VM context to invalidate. - */ -void flush_tlb_mm(struct mm_struct *mm) -{ - cpumask_t cpu_mask; - - preempt_disable(); - cpumask_copy(&cpu_mask, mm_cpumask(mm)); - cpumask_clear_cpu(smp_processor_id(), &cpu_mask); - - local_flush_tlb(); - if (!cpumask_empty(&cpu_mask)) - flush_tlb_others(cpu_mask, mm, FLUSH_ALL); - - preempt_enable(); -} - -/** - * flush_tlb_current_task - Invalidate TLB of current task - */ -void flush_tlb_current_task(void) -{ - struct mm_struct *mm = current->mm; - cpumask_t cpu_mask; - - preempt_disable(); - cpumask_copy(&cpu_mask, mm_cpumask(mm)); - cpumask_clear_cpu(smp_processor_id(), &cpu_mask); - - local_flush_tlb(); - if (!cpumask_empty(&cpu_mask)) - flush_tlb_others(cpu_mask, mm, FLUSH_ALL); - - preempt_enable(); -} - -/** - * flush_tlb_page - Invalidate TLB of page - * @vma: The VM context to invalidate the page for. - * @va: The virtual address of the page to invalidate. - */ -void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) -{ - struct mm_struct *mm = vma->vm_mm; - cpumask_t cpu_mask; - - preempt_disable(); - cpumask_copy(&cpu_mask, mm_cpumask(mm)); - cpumask_clear_cpu(smp_processor_id(), &cpu_mask); - - local_flush_tlb_page(mm, va); - if (!cpumask_empty(&cpu_mask)) - flush_tlb_others(cpu_mask, mm, va); - - preempt_enable(); -} - -/** - * do_flush_tlb_all - Callback to completely invalidate a TLB - * @unused: Callback context (ignored). - */ -static void do_flush_tlb_all(void *unused) -{ - local_flush_tlb_all(); -} - -/** - * flush_tlb_all - Completely invalidate TLBs on all CPUs - */ -void flush_tlb_all(void) -{ - on_each_cpu(do_flush_tlb_all, 0, 1); -} diff --git a/arch/mn10300/oprofile/Makefile b/arch/mn10300/oprofile/Makefile deleted file mode 100644 index 9fa95aaf496b..000000000000 --- a/arch/mn10300/oprofile/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the MN10300-specific profiling code -# -obj-$(CONFIG_OPROFILE) += oprofile.o - -DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ - oprof.o cpu_buffer.o buffer_sync.o \ - event_buffer.o oprofile_files.o \ - oprofilefs.o oprofile_stats.o \ - timer_int.o ) - -oprofile-y := $(DRIVER_OBJS) op_model_null.o - diff --git a/arch/mn10300/oprofile/op_model_null.c b/arch/mn10300/oprofile/op_model_null.c deleted file mode 100644 index cd4ab374bc4f..000000000000 --- a/arch/mn10300/oprofile/op_model_null.c +++ /dev/null @@ -1,22 +0,0 @@ -/* Null profiling driver - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * Licence. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include - -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - return -ENODEV; -} - -void oprofile_arch_exit(void) -{ -} - diff --git a/arch/mn10300/proc-mn103e010/Makefile b/arch/mn10300/proc-mn103e010/Makefile deleted file mode 100644 index ac2c9784cd21..000000000000 --- a/arch/mn10300/proc-mn103e010/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the MN103E010 processor chip specific code -# -obj-y := proc-init.o - diff --git a/arch/mn10300/proc-mn103e010/include/proc/cache.h b/arch/mn10300/proc-mn103e010/include/proc/cache.h deleted file mode 100644 index 967d144f307e..000000000000 --- a/arch/mn10300/proc-mn103e010/include/proc/cache.h +++ /dev/null @@ -1,43 +0,0 @@ -/* MN103E010 Cache specification - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CACHE_H -#define _ASM_PROC_CACHE_H - -/* L1 cache */ - -#define L1_CACHE_NWAYS 4 /* number of ways in caches */ -#define L1_CACHE_NENTRIES 256 /* number of entries in each way */ -#define L1_CACHE_BYTES 16 /* bytes per entry */ -#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */ -#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */ - -#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ -#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ -#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */ -#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ -#define L1_CACHE_TAG_MASK +(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY) - -/* - * specification of the interval between interrupt checking intervals whilst - * managing the cache with the interrupts disabled - */ -#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 - -/* - * The size of range at which it becomes more economical to just flush the - * whole cache rather than trying to flush the specified range. - */ -#define MN10300_DCACHE_FLUSH_BORDER \ - +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) -#define MN10300_DCACHE_FLUSH_INV_BORDER \ - +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) - -#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/clock.h b/arch/mn10300/proc-mn103e010/include/proc/clock.h deleted file mode 100644 index 704a819f1f4b..000000000000 --- a/arch/mn10300/proc-mn103e010/include/proc/clock.h +++ /dev/null @@ -1,16 +0,0 @@ -/* MN103E010-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CLOCK_H -#define _ASM_PROC_CLOCK_H - -#include - -#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h deleted file mode 100644 index d72d328d1f9c..000000000000 --- a/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h +++ /dev/null @@ -1,102 +0,0 @@ -/* MN103E010 on-board DMA controller registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_DMACTL_REGS_H -#define _ASM_PROC_DMACTL_REGS_H - -#include - -#ifdef __KERNEL__ - -/* DMA registers */ -#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ -#define DMxCTR_BG 0x0000001f /* transfer request source */ -#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ -#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ -#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ -#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ -#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ -#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ -#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ -#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ -#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ -#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ -#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ -#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ -#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ -#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ -#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ -#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ -#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ -#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ -#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ -#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ -#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ -#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ -#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ -#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ -#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ -#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ -#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ -#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ -#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ -#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ -#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ -#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ -#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ -#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ -#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ -#define DMxCTR_RQM 0x00060000 /* external request input source mode */ -#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ -#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ -#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ -#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ -#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ -#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ - -#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ - -#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ - -#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ -#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ - -#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent - * size reg */ -#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ - -#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ -#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ -#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ -#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ - -#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ -#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ -#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ -#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ - -#ifndef __ASSEMBLY__ - -struct mn10300_dmactl_regs { - u32 ctr; - const void *src; - void *dst; - u32 siz; - u32 cyc; -} __attribute__((aligned(0x100))); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PROC_DMACTL_REGS_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h b/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h deleted file mode 100644 index 516afe824055..000000000000 --- a/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_PROC_INTCTL_REGS_H -#define _ASM_PROC_INTCTL_REGS_H - -#ifndef _ASM_INTCTL_REGS_H -# error "please don't include this file directly" -#endif - -/* intr acceptance group reg */ -#define IAGR __SYSREG(0xd4000100, u16) - -/* group number register */ -#define IAGR_GN 0x00fc - -#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3) - -#define __SET_XIRQ_TRIGGER(X, Y, Z) \ -({ \ - typeof(Z) x = (Z); \ - x &= ~(3 << ((X) * 2)); \ - x |= ((Y) & 3) << ((X) * 2); \ - (Z) = x; \ -}) - -/* external pin intr spec reg */ -#define EXTMD __SYSREG(0xd4000200, u16) -#define GET_XIRQ_TRIGGER(X) __GET_XIRQ_TRIGGER(X, EXTMD) -#define SET_XIRQ_TRIGGER(X, Y) __SET_XIRQ_TRIGGER(X, Y, EXTMD) - -#endif /* _ASM_PROC_INTCTL_REGS_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/irq.h b/arch/mn10300/proc-mn103e010/include/proc/irq.h deleted file mode 100644 index aa6ee8f98b1b..000000000000 --- a/arch/mn10300/proc-mn103e010/include/proc/irq.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN103E010 On-board interrupt controller numbers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_IRQ_H -#define _ASM_PROC_IRQ_H - -#ifdef __KERNEL__ - -#define GxICR_NUM_IRQS 42 - -#define GxICR_NUM_XIRQS 8 - -#define XIRQ0 34 -#define XIRQ1 35 -#define XIRQ2 36 -#define XIRQ3 37 -#define XIRQ4 38 -#define XIRQ5 39 -#define XIRQ6 40 -#define XIRQ7 41 - -#define XIRQ2IRQ(num) (XIRQ0 + num) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PROC_IRQ_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/proc.h b/arch/mn10300/proc-mn103e010/include/proc/proc.h deleted file mode 100644 index 39c4f8e7d2d3..000000000000 --- a/arch/mn10300/proc-mn103e010/include/proc/proc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN103E010 Processor description - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_PROC_H -#define _ASM_PROC_PROC_H - -#define PROCESSOR_VENDOR_NAME "Panasonic" -#define PROCESSOR_MODEL_NAME "mn103e010" - -#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c deleted file mode 100644 index 102d86a6ae56..000000000000 --- a/arch/mn10300/proc-mn103e010/proc-init.c +++ /dev/null @@ -1,115 +0,0 @@ -/* MN103E010 Processor initialisation - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include - -/* - * initialise the on-silicon processor peripherals - */ -asmlinkage void __init processor_init(void) -{ - int loop; - - /* set up the exception table first */ - for (loop = 0x000; loop < 0x400; loop += 8) - __set_intr_stub(loop, __common_exception); - - __set_intr_stub(EXCEP_ITLBMISS, itlb_miss); - __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss); - __set_intr_stub(EXCEP_IAERROR, itlb_aerror); - __set_intr_stub(EXCEP_DAERROR, dtlb_aerror); - __set_intr_stub(EXCEP_BUSERROR, raw_bus_error); - __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault); - __set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled); - __set_intr_stub(EXCEP_SYSCALL0, system_call); - - __set_intr_stub(EXCEP_NMI, nmi_handler); - __set_intr_stub(EXCEP_WDT, nmi_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler); - - IVAR0 = EXCEP_IRQ_LEVEL0; - IVAR1 = EXCEP_IRQ_LEVEL1; - IVAR2 = EXCEP_IRQ_LEVEL2; - IVAR3 = EXCEP_IRQ_LEVEL3; - IVAR4 = EXCEP_IRQ_LEVEL4; - IVAR5 = EXCEP_IRQ_LEVEL5; - IVAR6 = EXCEP_IRQ_LEVEL6; - - mn10300_dcache_flush_inv(); - mn10300_icache_inv(); - - /* disable all interrupts and set to priority 6 (lowest) */ - for (loop = 0; loop < NR_IRQS; loop++) - GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; - - /* clear the timers */ - TM0MD = 0; - TM1MD = 0; - TM2MD = 0; - TM3MD = 0; - TM4MD = 0; - TM5MD = 0; - TM6MD = 0; - TM6MDA = 0; - TM6MDB = 0; - TM7MD = 0; - TM8MD = 0; - TM9MD = 0; - TM10MD = 0; - TM11MD = 0; - - calibrate_clock(); -} - -/* - * determine the memory size and base from the memory controller regs - */ -void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) -{ - unsigned long base, size; - - *mem_base = 0; - *mem_size = 0; - - base = SDBASE(0); - if (base & SDBASE_CE) { - size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; - size = ~size + 1; - base &= SDBASE_CBA; - - printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base); - *mem_size += size; - *mem_base = base; - } - - base = SDBASE(1); - if (base & SDBASE_CE) { - size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; - size = ~size + 1; - base &= SDBASE_CBA; - - printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base); - *mem_size += size; - if (*mem_base == 0) - *mem_base = base; - } -} diff --git a/arch/mn10300/proc-mn2ws0050/Makefile b/arch/mn10300/proc-mn2ws0050/Makefile deleted file mode 100644 index d4ca13309a85..000000000000 --- a/arch/mn10300/proc-mn2ws0050/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := proc-init.o diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h deleted file mode 100644 index bcb5df2d892f..000000000000 --- a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h +++ /dev/null @@ -1,49 +0,0 @@ -/* Cache specification - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * Modified by Matsushita Electric Industrial Co., Ltd. - * Modifications: - * 13-Nov-2006 MEI Add L1_CACHE_SHIFT_MAX definition. - * 29-Jul-2008 MEI Add define for MN10300_HAS_AREAPURGE_REG. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CACHE_H -#define _ASM_PROC_CACHE_H - -/* - * L1 cache - */ -#define L1_CACHE_NWAYS 4 /* number of ways in caches */ -#define L1_CACHE_NENTRIES 128 /* number of entries in each way */ -#define L1_CACHE_BYTES 32 /* bytes per entry */ -#define L1_CACHE_SHIFT 5 /* shift for bytes per entry */ -#define L1_CACHE_WAYDISP 0x1000 /* distance from one way to the next */ - -#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ -#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ -#define L1_CACHE_TAG_ENTRY 0x00000fe0 /* cache tag entry address mask */ -#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ -#define L1_CACHE_TAG_MASK +(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY) - -/* - * specification of the interval between interrupt checking intervals whilst - * managing the cache with the interrupts disabled - */ -#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 - -/* - * The size of range at which it becomes more economical to just flush the - * whole cache rather than trying to flush the specified range. - */ -#define MN10300_DCACHE_FLUSH_BORDER \ - +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) -#define MN10300_DCACHE_FLUSH_INV_BORDER \ - +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) - -#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/clock.h b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h deleted file mode 100644 index fe4c0a4a53a2..000000000000 --- a/arch/mn10300/proc-mn2ws0050/include/proc/clock.h +++ /dev/null @@ -1,20 +0,0 @@ -/* clock.h: proc-specific clocks - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * Modified by Matsushita Electric Industrial Co., Ltd. - * Modifications: - * 23-Feb-2007 MEI Delete define for watchdog timer. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CLOCK_H -#define _ASM_PROC_CLOCK_H - -#include - -#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h deleted file mode 100644 index 4c4319e241d1..000000000000 --- a/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h +++ /dev/null @@ -1,103 +0,0 @@ -/* MN2WS0050 on-board DMA controller registers - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - */ - -#ifndef _ASM_PROC_DMACTL_REGS_H -#define _ASM_PROC_DMACTL_REGS_H - -#include - -#ifdef __KERNEL__ - -/* DMA registers */ -#define DMxCTR(N) __SYSREG(0xd4005000+(N*0x100), u32) /* control reg */ -#define DMxCTR_BG 0x0000001f /* transfer request source */ -#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ -#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ -#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ -#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ -#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ -#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ -#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ -#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ -#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ -#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ -#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ -#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ -#define DMxCTR_BG_RYBY 0x0000000d /* - NAND Flash RY/BY request source */ -#define DMxCTR_BG_RMC 0x0000000e /* - remote controller output */ -#define DMxCTR_BG_XIRQ12 0x00000011 /* - XIRQ12 pin interrupt source */ -#define DMxCTR_BG_XIRQ13 0x00000012 /* - XIRQ13 pin interrupt source */ -#define DMxCTR_BG_TCK 0x00000014 /* - tick timer underflow */ -#define DMxCTR_BG_SC4TX 0x00000019 /* - serial port4 transmission */ -#define DMxCTR_BG_SC4RX 0x0000001a /* - serial port4 reception */ -#define DMxCTR_BG_SC5TX 0x0000001b /* - serial port5 transmission */ -#define DMxCTR_BG_SC5RX 0x0000001c /* - serial port5 reception */ -#define DMxCTR_BG_SC6TX 0x0000001d /* - serial port6 transmission */ -#define DMxCTR_BG_SC6RX 0x0000001e /* - serial port6 reception */ -#define DMxCTR_BG_TMSUFLOW 0x0000001f /* - timestamp timer underflow */ -#define DMxCTR_SAM 0x00000060 /* DMA transfer src addr mode */ -#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ -#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ -#define DMxCTR_DAM 0x00000300 /* DMA transfer dest addr mode */ -#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ -#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ -#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ -#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ -#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ -#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ -#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ -#define DMxCTR_RRE 0x00008000 /* DMA round robin enable */ -#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ -#define DMxCTR_RQM 0x00060000 /* external request input source mode */ -#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ -#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ -#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ -#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ -#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ -#define DMxCTR_PERR 0x40000000 /* DMA transfer parameter error flag */ -#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ - -#define DMxSRC(N) __SYSREG(0xd4005004+(N*0x100), u32) /* control reg */ - -#define DMxDST(N) __SYSREG(0xd4005008+(N*0x100), u32) /* source addr reg */ - -#define DMxSIZ(N) __SYSREG(0xd400500c+(N*0x100), u32) /* dest addr reg */ -#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ - -#define DMxCYC(N) __SYSREG(0xd4005010+(N*0x100), u32) /* intermittent size reg */ -#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ - -#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ -#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ -#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ -#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ - -#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ -#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ -#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ -#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ - -#ifndef __ASSEMBLY__ - -struct mn10300_dmactl_regs { - u32 ctr; - const void *src; - void *dst; - u32 siz; - u32 cyc; -} __attribute__((aligned(0x100))); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PROC_DMACTL_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h deleted file mode 100644 index 4d4084ea6694..000000000000 --- a/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_PROC_INTCTL_REGS_H -#define _ASM_PROC_INTCTL_REGS_H - -#ifndef _ASM_INTCTL_REGS_H -# error "please don't include this file directly" -#endif - -/* intr acceptance group reg */ -#define IAGR __SYSREG(0xd4000100, u16) - -/* group number register */ -#define IAGR_GN 0x003fc - -#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3) - -#define __SET_XIRQ_TRIGGER(X, Y, Z) \ -({ \ - typeof(Z) x = (Z); \ - x &= ~(3 << ((X) * 2)); \ - x |= ((Y) & 3) << ((X) * 2); \ - (Z) = x; \ -}) - -/* external pin intr spec reg */ -#define EXTMD0 __SYSREG(0xd4000200, u32) -#define GET_XIRQ_TRIGGER(X) __GET_XIRQ_TRIGGER(X, EXTMD0) -#define SET_XIRQ_TRIGGER(X, Y) __SET_XIRQ_TRIGGER(X, Y, EXTMD0) - -#endif /* _ASM_PROC_INTCTL_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/irq.h b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h deleted file mode 100644 index 37777a85ab6f..000000000000 --- a/arch/mn10300/proc-mn2ws0050/include/proc/irq.h +++ /dev/null @@ -1,49 +0,0 @@ -/* MN2WS0050 on-board interrupt controller registers - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * Modified by Matsushita Electric Industrial Co., Ltd. - * Modifications: - * 13-Nov-2006 MEI Define extended IRQ number for SMP support. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PROC_IRQ_H -#define _PROC_IRQ_H - -#ifdef __KERNEL__ - -#define GxICR_NUM_IRQS 163 -#ifdef CONFIG_SMP -#define GxICR_NUM_EXT_IRQS 197 -#endif /* CONFIG_SMP */ - -#define GxICR_NUM_XIRQS 16 - -#define XIRQ0 34 -#define XIRQ1 35 -#define XIRQ2 36 -#define XIRQ3 37 -#define XIRQ4 38 -#define XIRQ5 39 -#define XIRQ6 40 -#define XIRQ7 41 -#define XIRQ8 42 -#define XIRQ9 43 -#define XIRQ10 44 -#define XIRQ11 45 -#define XIRQ12 46 -#define XIRQ13 47 -#define XIRQ14 48 -#define XIRQ15 49 - -#define XIRQ2IRQ(num) (XIRQ0 + num) - -#endif /* __KERNEL__ */ - -#endif /* _PROC_IRQ_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h deleted file mode 100644 index 84448f3828b3..000000000000 --- a/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h +++ /dev/null @@ -1,120 +0,0 @@ -/* NAND flash interface register definitions - * - * Copyright (C) 2008-2009 Panasonic Corporation - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _PROC_NAND_REGS_H_ -#define _PROC_NAND_REGS_H_ - -/* command register */ -#define FCOMMAND_0 __SYSREG(0xd8f00000, u8) /* fcommand[24:31] */ -#define FCOMMAND_1 __SYSREG(0xd8f00001, u8) /* fcommand[16:23] */ -#define FCOMMAND_2 __SYSREG(0xd8f00002, u8) /* fcommand[8:15] */ -#define FCOMMAND_3 __SYSREG(0xd8f00003, u8) /* fcommand[0:7] */ - -/* for dma 16 byte trans, use FCOMMAND2 register */ -#define FCOMMAND2_0 __SYSREG(0xd8f00110, u8) /* fcommand2[24:31] */ -#define FCOMMAND2_1 __SYSREG(0xd8f00111, u8) /* fcommand2[16:23] */ -#define FCOMMAND2_2 __SYSREG(0xd8f00112, u8) /* fcommand2[8:15] */ -#define FCOMMAND2_3 __SYSREG(0xd8f00113, u8) /* fcommand2[0:7] */ - -#define FCOMMAND_FIEN 0x80 /* nand flash I/F enable */ -#define FCOMMAND_BW_8BIT 0x00 /* 8bit bus width */ -#define FCOMMAND_BW_16BIT 0x40 /* 16bit bus width */ -#define FCOMMAND_BLOCKSZ_SMALL 0x00 /* small block */ -#define FCOMMAND_BLOCKSZ_LARGE 0x20 /* large block */ -#define FCOMMAND_DMASTART 0x10 /* dma start */ -#define FCOMMAND_RYBY 0x08 /* ready/busy flag */ -#define FCOMMAND_RYBYINTMSK 0x04 /* mask ready/busy interrupt */ -#define FCOMMAND_XFWP 0x02 /* write protect enable */ -#define FCOMMAND_XFCE 0x01 /* flash device disable */ -#define FCOMMAND_SEQKILL 0x10 /* stop seq-read */ -#define FCOMMAND_ANUM 0x07 /* address cycle */ -#define FCOMMAND_ANUM_NONE 0x00 /* address cycle none */ -#define FCOMMAND_ANUM_1CYC 0x01 /* address cycle 1cycle */ -#define FCOMMAND_ANUM_2CYC 0x02 /* address cycle 2cycle */ -#define FCOMMAND_ANUM_3CYC 0x03 /* address cycle 3cycle */ -#define FCOMMAND_ANUM_4CYC 0x04 /* address cycle 4cycle */ -#define FCOMMAND_ANUM_5CYC 0x05 /* address cycle 5cycle */ -#define FCOMMAND_FCMD_READ0 0x00 /* read1 command */ -#define FCOMMAND_FCMD_SEQIN 0x80 /* page program 1st command */ -#define FCOMMAND_FCMD_PAGEPROG 0x10 /* page program 2nd command */ -#define FCOMMAND_FCMD_RESET 0xff /* reset command */ -#define FCOMMAND_FCMD_ERASE1 0x60 /* erase 1st command */ -#define FCOMMAND_FCMD_ERASE2 0xd0 /* erase 2nd command */ -#define FCOMMAND_FCMD_STATUS 0x70 /* read status command */ -#define FCOMMAND_FCMD_READID 0x90 /* read id command */ -#define FCOMMAND_FCMD_READOOB 0x50 /* read3 command */ -/* address register */ -#define FADD __SYSREG(0xd8f00004, u32) -/* address register 2 */ -#define FADD2 __SYSREG(0xd8f00008, u32) -/* error judgement register */ -#define FJUDGE __SYSREG(0xd8f0000c, u32) -#define FJUDGE_NOERR 0x0 /* no error */ -#define FJUDGE_1BITERR 0x1 /* 1bit error in data area */ -#define FJUDGE_PARITYERR 0x2 /* parity error */ -#define FJUDGE_UNCORRECTABLE 0x3 /* uncorrectable error */ -#define FJUDGE_ERRJDG_MSK 0x3 /* mask of judgement result */ -/* 1st ECC store register */ -#define FECC11 __SYSREG(0xd8f00010, u32) -/* 2nd ECC store register */ -#define FECC12 __SYSREG(0xd8f00014, u32) -/* 3rd ECC store register */ -#define FECC21 __SYSREG(0xd8f00018, u32) -/* 4th ECC store register */ -#define FECC22 __SYSREG(0xd8f0001c, u32) -/* 5th ECC store register */ -#define FECC31 __SYSREG(0xd8f00020, u32) -/* 6th ECC store register */ -#define FECC32 __SYSREG(0xd8f00024, u32) -/* 7th ECC store register */ -#define FECC41 __SYSREG(0xd8f00028, u32) -/* 8th ECC store register */ -#define FECC42 __SYSREG(0xd8f0002c, u32) -/* data register */ -#define FDATA __SYSREG(0xd8f00030, u32) -/* access pulse register */ -#define FPWS __SYSREG(0xd8f00100, u32) -#define FPWS_PWS1W_2CLK 0x00000000 /* write pulse width 1clock */ -#define FPWS_PWS1W_3CLK 0x01000000 /* write pulse width 2clock */ -#define FPWS_PWS1W_4CLK 0x02000000 /* write pulse width 4clock */ -#define FPWS_PWS1W_5CLK 0x03000000 /* write pulse width 5clock */ -#define FPWS_PWS1W_6CLK 0x04000000 /* write pulse width 6clock */ -#define FPWS_PWS1W_7CLK 0x05000000 /* write pulse width 7clock */ -#define FPWS_PWS1W_8CLK 0x06000000 /* write pulse width 8clock */ -#define FPWS_PWS1R_3CLK 0x00010000 /* read pulse width 3clock */ -#define FPWS_PWS1R_4CLK 0x00020000 /* read pulse width 4clock */ -#define FPWS_PWS1R_5CLK 0x00030000 /* read pulse width 5clock */ -#define FPWS_PWS1R_6CLK 0x00040000 /* read pulse width 6clock */ -#define FPWS_PWS1R_7CLK 0x00050000 /* read pulse width 7clock */ -#define FPWS_PWS1R_8CLK 0x00060000 /* read pulse width 8clock */ -#define FPWS_PWS2W_2CLK 0x00000100 /* write pulse interval 2clock */ -#define FPWS_PWS2W_3CLK 0x00000200 /* write pulse interval 3clock */ -#define FPWS_PWS2W_4CLK 0x00000300 /* write pulse interval 4clock */ -#define FPWS_PWS2W_5CLK 0x00000400 /* write pulse interval 5clock */ -#define FPWS_PWS2W_6CLK 0x00000500 /* write pulse interval 6clock */ -#define FPWS_PWS2R_2CLK 0x00000001 /* read pulse interval 2clock */ -#define FPWS_PWS2R_3CLK 0x00000002 /* read pulse interval 3clock */ -#define FPWS_PWS2R_4CLK 0x00000003 /* read pulse interval 4clock */ -#define FPWS_PWS2R_5CLK 0x00000004 /* read pulse interval 5clock */ -#define FPWS_PWS2R_6CLK 0x00000005 /* read pulse interval 6clock */ -/* command register 2 */ -#define FCOMMAND2 __SYSREG(0xd8f00110, u32) -/* transfer frequency register */ -#define FNUM __SYSREG(0xd8f00114, u32) -#define FSDATA_ADDR 0xd8f00400 -/* active data register */ -#define FSDATA __SYSREG(FSDATA_ADDR, u32) - -#endif /* _PROC_NAND_REGS_H_ */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/proc.h b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h deleted file mode 100644 index 90d5cadd05bd..000000000000 --- a/arch/mn10300/proc-mn2ws0050/include/proc/proc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* proc.h: MN2WS0050 processor description - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_PROC_H -#define _ASM_PROC_PROC_H - -#define PROCESSOR_VENDOR_NAME "Panasonic" -#define PROCESSOR_MODEL_NAME "mn2ws0050" - -#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h deleted file mode 100644 index 22f277fbb4de..000000000000 --- a/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h +++ /dev/null @@ -1,51 +0,0 @@ -/* MN10300/AM33v2 Microcontroller SMP registers - * - * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. - * All Rights Reserved. - * Created: - * 13-Nov-2006 MEI Add extended cache and atomic operation register - * for SMP support. - * 23-Feb-2007 MEI Add define for gdbstub SMP. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_SMP_REGS_H -#define _ASM_PROC_SMP_REGS_H - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#include -#endif -#include - -/* - * Reference to the interrupt controllers of other CPUs - */ -#define CROSS_ICR_CPU_SHIFT 16 - -#define CROSS_GxICR(X, CPU) __SYSREG(0xc4000000 + (X) * 4 + \ - ((X) >= 64 && (X) < 192) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u16) -#define CROSS_GxICR_u8(X, CPU) __SYSREG(0xc4000000 + (X) * 4 + \ - (((X) >= 64) && ((X) < 192)) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u8) - -/* CPU ID register */ -#define CPUID __SYSREGC(0xc0000054, u32) -#define CPUID_MASK 0x00000007 /* CPU ID mask */ - -/* extended cache control register */ -#define ECHCTR __SYSREG(0xc0000c20, u32) -#define ECHCTR_IBCM 0x00000001 /* instruction cache broad cast mask */ -#define ECHCTR_DBCM 0x00000002 /* data cache broad cast mask */ -#define ECHCTR_ISPM 0x00000004 /* instruction cache snoop mask */ -#define ECHCTR_DSPM 0x00000008 /* data cache snoop mask */ - -#define NMIAGR __SYSREG(0xd400013c, u16) -#define NMIAGR_GN 0x03fc - -#endif /* __KERNEL__ */ -#endif /* _ASM_PROC_SMP_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c deleted file mode 100644 index 25b1b453c515..000000000000 --- a/arch/mn10300/proc-mn2ws0050/proc-init.c +++ /dev/null @@ -1,134 +0,0 @@ -/* MN2WS0050 processor initialisation - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MEMCONF __SYSREGC(0xdf800400, u32) - -/* - * initialise the on-silicon processor peripherals - */ -asmlinkage void __init processor_init(void) -{ - int loop; - - /* set up the exception table first */ - for (loop = 0x000; loop < 0x400; loop += 8) - __set_intr_stub(loop, __common_exception); - - __set_intr_stub(EXCEP_ITLBMISS, itlb_miss); - __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss); - __set_intr_stub(EXCEP_IAERROR, itlb_aerror); - __set_intr_stub(EXCEP_DAERROR, dtlb_aerror); - __set_intr_stub(EXCEP_BUSERROR, raw_bus_error); - __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault); - __set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled); - __set_intr_stub(EXCEP_SYSCALL0, system_call); - - __set_intr_stub(EXCEP_NMI, nmi_handler); - __set_intr_stub(EXCEP_WDT, nmi_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler); - __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler); - - IVAR0 = EXCEP_IRQ_LEVEL0; - IVAR1 = EXCEP_IRQ_LEVEL1; - IVAR2 = EXCEP_IRQ_LEVEL2; - IVAR3 = EXCEP_IRQ_LEVEL3; - IVAR4 = EXCEP_IRQ_LEVEL4; - IVAR5 = EXCEP_IRQ_LEVEL5; - IVAR6 = EXCEP_IRQ_LEVEL6; - -#ifndef CONFIG_MN10300_HAS_CACHE_SNOOP - mn10300_dcache_flush_inv(); - mn10300_icache_inv(); -#endif - - /* disable all interrupts and set to priority 6 (lowest) */ -#ifdef CONFIG_SMP - for (loop = 0; loop < GxICR_NUM_IRQS; loop++) - GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; -#else /* !CONFIG_SMP */ - for (loop = 0; loop < NR_IRQS; loop++) - GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; -#endif /* !CONFIG_SMP */ - - /* clear the timers */ - TM0MD = 0; - TM1MD = 0; - TM2MD = 0; - TM3MD = 0; - TM4MD = 0; - TM5MD = 0; - TM6MD = 0; - TM6MDA = 0; - TM6MDB = 0; - TM7MD = 0; - TM8MD = 0; - TM9MD = 0; - TM10MD = 0; - TM11MD = 0; - TM12MD = 0; - TM13MD = 0; - TM14MD = 0; - TM15MD = 0; - - calibrate_clock(); -} - -/* - * determine the memory size and base from the memory controller regs - */ -void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) -{ - unsigned long memconf = MEMCONF; - unsigned long size = 0; /* order: MByte */ - - *mem_base = 0x90000000; /* fixed address */ - - switch (memconf & 0x00000003) { - case 0x01: - size = 256 / 8; /* 256 Mbit per chip */ - break; - case 0x02: - size = 512 / 8; /* 512 Mbit per chip */ - break; - case 0x03: - size = 1024 / 8; /* 1 Gbit per chip */ - break; - default: - panic("Invalid SDRAM size"); - break; - } - - printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base); - - *mem_size = (size * 2) << 20; -} diff --git a/arch/mn10300/unit-asb2303/Makefile b/arch/mn10300/unit-asb2303/Makefile deleted file mode 100644 index 38a5bb43b0bb..000000000000 --- a/arch/mn10300/unit-asb2303/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -############################################################################### -# -# Makefile for the ASB2303 board -# -############################################################################### -obj-y := unit-init.o smc91111.o flash.o leds.o diff --git a/arch/mn10300/unit-asb2303/flash.c b/arch/mn10300/unit-asb2303/flash.c deleted file mode 100644 index b03d8738d67c..000000000000 --- a/arch/mn10300/unit-asb2303/flash.c +++ /dev/null @@ -1,99 +0,0 @@ -/* Handle mapping of the flash on the ASB2303 board - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include - -#define ASB2303_PROM_ADDR 0xA0000000 /* Boot PROM */ -#define ASB2303_PROM_SIZE (2 * 1024 * 1024) -#define ASB2303_FLASH_ADDR 0xA4000000 /* System Flash */ -#define ASB2303_FLASH_SIZE (32 * 1024 * 1024) -#define ASB2303_CONFIG_ADDR 0xA6000000 /* System Config EEPROM */ -#define ASB2303_CONFIG_SIZE (8 * 1024) - -/* - * default MTD partition table for both main flash devices, expected to be - * overridden by RedBoot - */ -static struct mtd_partition asb2303_partitions[] = { - { - .name = "Bootloader", - .size = 0x00040000, - .offset = 0, - .mask_flags = MTD_CAP_ROM /* force read-only */ - }, { - .name = "Kernel", - .size = 0x00400000, - .offset = 0x00040000, - }, { - .name = "Filesystem", - .size = MTDPART_SIZ_FULL, - .offset = 0x00440000 - } -}; - -/* - * the ASB2303 Boot PROM definition - */ -static struct physmap_flash_data asb2303_bootprom_data = { - .width = 2, - .nr_parts = 1, - .parts = asb2303_partitions, -}; - -static struct resource asb2303_bootprom_resource = { - .start = ASB2303_PROM_ADDR, - .end = ASB2303_PROM_ADDR + ASB2303_PROM_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device asb2303_bootprom = { - .name = "physmap-flash", - .id = 0, - .dev.platform_data = &asb2303_bootprom_data, - .num_resources = 1, - .resource = &asb2303_bootprom_resource, -}; - -/* - * the ASB2303 System Flash definition - */ -static struct physmap_flash_data asb2303_sysflash_data = { - .width = 4, - .nr_parts = 1, - .parts = asb2303_partitions, -}; - -static struct resource asb2303_sysflash_resource = { - .start = ASB2303_FLASH_ADDR, - .end = ASB2303_FLASH_ADDR + ASB2303_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device asb2303_sysflash = { - .name = "physmap-flash", - .id = 1, - .dev.platform_data = &asb2303_sysflash_data, - .num_resources = 1, - .resource = &asb2303_sysflash_resource, -}; - -/* - * register the ASB2303 flashes - */ -static int __init asb2303_mtd_init(void) -{ - platform_device_register(&asb2303_bootprom); - platform_device_register(&asb2303_sysflash); - return 0; -} -device_initcall(asb2303_mtd_init); diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h deleted file mode 100644 index 0316907a012e..000000000000 --- a/arch/mn10300/unit-asb2303/include/unit/clock.h +++ /dev/null @@ -1,24 +0,0 @@ -/* ASB2303-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#define MN10300_IOCLK 33333333UL -/* #define MN10300_IOBCLK 66666666UL */ - -#endif /* !__ASSEMBLY__ */ - -#define MN10300_WDCLK MN10300_IOCLK - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/leds.h b/arch/mn10300/unit-asb2303/include/unit/leds.h deleted file mode 100644 index 3a7543ea7b5c..000000000000 --- a/arch/mn10300/unit-asb2303/include/unit/leds.h +++ /dev/null @@ -1,43 +0,0 @@ -/* ASB2303-specific LEDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include -#include -#include - -#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32) -#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32) - -/* - * use the 7-segment LEDs to indicate states - */ - -/* flip the 7-segment LEDs between "G" and "-" */ -#define mn10300_set_gdbleds(ONOFF) \ -do { \ - ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \ -} while (0) - -/* indicate double-fault by displaying "d" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43,d0 ; \ - movbu d0,(ASB2303_7SEGLEDS) - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code code); -extern void peripheral_leds_led_chase(void); -extern void debug_to_serial(const char *p, int n); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/serial.h b/arch/mn10300/unit-asb2303/include/unit/serial.h deleted file mode 100644 index 991e356bac5f..000000000000 --- a/arch/mn10300/unit-asb2303/include/unit/serial.h +++ /dev/null @@ -1,141 +0,0 @@ -/* ASB2303-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include -#include -#include - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000 - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * The ASB2303 has an 18.432 MHz clock the UART - */ -#define BASE_BAUD (18432000 / 16) - -/* - * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ -#endif - -#ifndef __ASSEMBLY__ - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - GDBPORT_SERIAL_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - GDBPORT_SERIAL_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/smc91111.h b/arch/mn10300/unit-asb2303/include/unit/smc91111.h deleted file mode 100644 index dd4e2946438e..000000000000 --- a/arch/mn10300/unit-asb2303/include/unit/smc91111.h +++ /dev/null @@ -1,50 +0,0 @@ -/* Support for the SMC91C111 NIC on an ASB2303 - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SMC91111_H -#define _ASM_UNIT_SMC91111_H - -#include - -#define SMC91111_BASE 0xAA000300UL -#define SMC91111_BASE_END 0xAA000400UL -#define SMC91111_IRQ XIRQ3 - -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_NOWAIT 1 -#define SMC_IRQ_FLAGS (0) - -#if SMC_CAN_USE_8BIT -#define SMC_inb(a, r) inb((unsigned long) ((a) + (r))) -#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r))) -#endif - -#if SMC_CAN_USE_16BIT -#define SMC_inw(a, r) inw((unsigned long) ((a) + (r))) -#define SMC_outw(lp, v, a, r) outw(v, (unsigned long) ((a) + (r))) -#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l)) -#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l)) -#endif - -#if SMC_CAN_USE_32BIT -#define SMC_inl(a, r) inl((unsigned long) ((a) + (r))) -#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r))) -#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l)) -#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l)) -#endif - -#define RPC_LSA_DEFAULT RPC_LED_100_10 -#define RPC_LSB_DEFAULT RPC_LED_TX_RX - -#define set_irq_type(irq, type) - -#endif /* _ASM_UNIT_SMC91111_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h deleted file mode 100644 index c37f9832cf17..000000000000 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ /dev/null @@ -1,146 +0,0 @@ -/* ASB2303-specific timer specifications - * - * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#include -#include -#include - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffff -#define TMJCIRQ TM1IRQ -#define TMJCICR TM1ICR - -#ifndef __ASSEMBLY__ - -#define MN10300_SRC_IOCLK MN10300_IOCLK - -#ifndef HZ -# error HZ undeclared. -#endif /* !HZ */ -/* use as little prescaling as possible to avoid losing accuracy */ -#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX -# define IOCLK_PRESCALE 1 -# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK -# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK -#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX -# define IOCLK_PRESCALE 8 -# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 -# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 -#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX -# define IOCLK_PRESCALE 32 -# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 -# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 -#else -# error You lose. -#endif - -#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) -#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) - -#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) -#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) - -static inline void stop_jiffies_counter(void) -{ - u16 tmp; - TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8; - tmp = TM01MD; -} - -static inline void reload_jiffies_counter(u32 cnt) -{ - u32 tmp; - - TM01BR = cnt; - tmp = TM01BR; - - TM01MD = JC_TIMER_CLKSRC | \ - TM1MD_SRC_TM0CASCADE << 8 | \ - TM0MD_INIT_COUNTER | \ - TM1MD_INIT_COUNTER << 8; - - - TM01MD = JC_TIMER_CLKSRC | \ - TM1MD_SRC_TM0CASCADE << 8 | \ - TM0MD_COUNT_ENABLE | \ - TM1MD_COUNT_ENABLE << 8; - - tmp = TM01MD; -} - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ - -#define TMTSCBR_MAX 0xffffffff -#define TMTSCBC TM45BC - -#ifndef __ASSEMBLY__ - -static inline void startup_timestamp_counter(void) -{ - u32 t32; - - /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time - * - count down from 4Gig-1 to 0 and wrap at IOCLK rate - */ - TM45BR = TMTSCBR_MAX; - t32 = TM45BR; - - TM4MD = TSC_TIMER_CLKSRC; - TM4MD |= TM4MD_INIT_COUNTER; - TM4MD &= ~TM4MD_INIT_COUNTER; - TM4ICR = 0; - t32 = TM4ICR; - - TM5MD = TM5MD_SRC_TM4CASCADE; - TM5MD |= TM5MD_INIT_COUNTER; - TM5MD &= ~TM5MD_INIT_COUNTER; - TM5ICR = 0; - t32 = TM5ICR; - - TM5MD |= TM5MD_COUNT_ENABLE; - TM4MD |= TM4MD_COUNT_ENABLE; - t32 = TM5MD; - t32 = TM4MD; -} - -static inline void shutdown_timestamp_counter(void) -{ - u8 t8; - TM4MD = 0; - TM5MD = 0; - t8 = TM4MD; - t8 = TM5MD; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t)~TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2303/leds.c b/arch/mn10300/unit-asb2303/leds.c deleted file mode 100644 index c03839357a14..000000000000 --- a/arch/mn10300/unit-asb2303/leds.c +++ /dev/null @@ -1,52 +0,0 @@ -/* ASB2303 peripheral 7-segment LEDs x1 support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include - -#include -#include -#include -#include -#include - -#if 0 -static const u8 asb2303_led_hex_tbl[16] = { - 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, - 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c -}; -#endif - -static const u8 asb2303_led_chase_tbl[6] = { - ~0x02, /* top - segA */ - ~0x04, /* right top - segB */ - ~0x08, /* right bottom - segC */ - ~0x10, /* bottom - segD */ - ~0x20, /* left bottom - segE */ - ~0x40, /* left top - segF */ -}; - -static unsigned asb2303_led_chase; - -void peripheral_leds_display_exception(enum exception_code code) -{ - ASB2303_GPIO0DEF = 0x5555; /* configure as an output port */ - ASB2303_7SEGLEDS = 0x6d; /* triple horizontal bar */ -} - -void peripheral_leds_led_chase(void) -{ - ASB2303_GPIO0DEF = 0x5555; /* configure as an output port */ - ASB2303_7SEGLEDS = asb2303_led_chase_tbl[asb2303_led_chase]; - asb2303_led_chase++; - if (asb2303_led_chase >= 6) - asb2303_led_chase = 0; -} diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c deleted file mode 100644 index 53677694b165..000000000000 --- a/arch/mn10300/unit-asb2303/smc91111.c +++ /dev/null @@ -1,53 +0,0 @@ -/* ASB2303 initialisation - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -static struct resource smc91c111_resources[] = { - [0] = { - .start = SMC91111_BASE, - .end = SMC91111_BASE_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SMC91111_IRQ, - .end = SMC91111_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91c111_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91c111_resources), - .resource = smc91c111_resources, -}; - -/* - * add platform devices - */ -static int __init unit_device_init(void) -{ - platform_device_register(&smc91c111_device); - return 0; -} - -device_initcall(unit_device_init); diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c deleted file mode 100644 index 834a76aa551a..000000000000 --- a/arch/mn10300/unit-asb2303/unit-init.c +++ /dev/null @@ -1,68 +0,0 @@ -/* ASB2303 initialisation - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -/* - * initialise some of the unit hardware before gdbstub is set up - */ -asmlinkage void __init unit_init(void) -{ - /* set up the external interrupts */ - SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_HILEVEL); - SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL); - SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL); - SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL); - SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL); - -#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL - set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); -#endif - -#ifdef CONFIG_ETHERNET_IRQ_LEVEL - set_intr_level(XIRQ3, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); -#endif -} - -/* - * initialise the rest of the unit hardware after gdbstub is ready - */ -void __init unit_setup(void) -{ -} - -/* - * initialise the external interrupts used by a unit of this type - */ -void __init unit_init_IRQ(void) -{ - unsigned int extnum; - - for (extnum = 0; extnum < NR_XIRQS; extnum++) { - switch (GET_XIRQ_TRIGGER(extnum)) { - case XIRQ_TRIGGER_HILEVEL: - case XIRQ_TRIGGER_LOWLEVEL: - mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); - break; - default: - break; - } - } -} diff --git a/arch/mn10300/unit-asb2305/Makefile b/arch/mn10300/unit-asb2305/Makefile deleted file mode 100644 index cbc5abaa939a..000000000000 --- a/arch/mn10300/unit-asb2305/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -############################################################################### -# -# Makefile for the ASB2305 board -# -############################################################################### -obj-y := unit-init.o leds.o - -obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h deleted file mode 100644 index 29e3425431cf..000000000000 --- a/arch/mn10300/unit-asb2305/include/unit/clock.h +++ /dev/null @@ -1,24 +0,0 @@ -/* ASB2305-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#define MN10300_IOCLK 33333333UL -/* #define MN10300_IOBCLK 66666666UL */ - -#endif /* !__ASSEMBLY__ */ - -#define MN10300_WDCLK MN10300_IOCLK - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/leds.h b/arch/mn10300/unit-asb2305/include/unit/leds.h deleted file mode 100644 index bc471f617fd1..000000000000 --- a/arch/mn10300/unit-asb2305/include/unit/leds.h +++ /dev/null @@ -1,51 +0,0 @@ -/* ASB2305-specific LEDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include -#include -#include - -#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) - -/* perform a hard reset by driving PIO06 low */ -#define mn10300_unit_hard_reset() \ -do { \ - P0OUT &= 0xbf; \ - P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ -} while (0) - -/* - * use the 7-segment LEDs to indicate states - */ -/* indicate double-fault by displaying "db-f" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43077f1d,d0 ; \ - mov d0,(ASB2305_7SEGLEDS) - -/* flip the 7-segment LEDs between "Gdb-" and "----" */ -#define mn10300_set_gdbleds(ONOFF) \ -do { \ - ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ -} while (0) - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code); -extern void peripheral_leds_led_chase(void); -extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_rtc(void); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h deleted file mode 100644 index 88c08219315f..000000000000 --- a/arch/mn10300/unit-asb2305/include/unit/serial.h +++ /dev/null @@ -1,125 +0,0 @@ -/* ASB2305-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include -#include -#include - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * The ASB2305 has an 18.432 MHz clock the UART - */ -#define BASE_BAUD (18432000 / 16) - -/* - * dispose of the /dev/ttyS0 serial port - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#error The ASB2305 doesnt have a /dev/ttyS1 -#endif - -#ifndef __ASSEMBLY__ - -#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - TTYS0_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - TTYS0_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - TTYS0_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - TTYS0_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h deleted file mode 100644 index 4cefc224f448..000000000000 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ /dev/null @@ -1,146 +0,0 @@ -/* ASB2305-specific timer specifications - * - * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#include -#include -#include - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffff -#define TMJCIRQ TM1IRQ -#define TMJCICR TM1ICR - -#ifndef __ASSEMBLY__ - -#define MN10300_SRC_IOCLK MN10300_IOCLK - -#ifndef HZ -# error HZ undeclared. -#endif /* !HZ */ -/* use as little prescaling as possible to avoid losing accuracy */ -#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX -# define IOCLK_PRESCALE 1 -# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK -# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK -#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX -# define IOCLK_PRESCALE 8 -# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 -# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 -#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX -# define IOCLK_PRESCALE 32 -# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 -# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 -#else -# error You lose. -#endif - -#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) -#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) - -#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) -#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) - -static inline void stop_jiffies_counter(void) -{ - u16 tmp; - TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8; - tmp = TM01MD; -} - -static inline void reload_jiffies_counter(u32 cnt) -{ - u32 tmp; - - TM01BR = cnt; - tmp = TM01BR; - - TM01MD = JC_TIMER_CLKSRC | \ - TM1MD_SRC_TM0CASCADE << 8 | \ - TM0MD_INIT_COUNTER | \ - TM1MD_INIT_COUNTER << 8; - - - TM01MD = JC_TIMER_CLKSRC | \ - TM1MD_SRC_TM0CASCADE << 8 | \ - TM0MD_COUNT_ENABLE | \ - TM1MD_COUNT_ENABLE << 8; - - tmp = TM01MD; -} - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ - -#define TMTSCBR_MAX 0xffffffff -#define TMTSCBC TM45BC - -#ifndef __ASSEMBLY__ - -static inline void startup_timestamp_counter(void) -{ - u32 t32; - - /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time - * - count down from 4Gig-1 to 0 and wrap at IOCLK rate - */ - TM45BR = TMTSCBR_MAX; - t32 = TM45BR; - - TM4MD = TSC_TIMER_CLKSRC; - TM4MD |= TM4MD_INIT_COUNTER; - TM4MD &= ~TM4MD_INIT_COUNTER; - TM4ICR = 0; - t32 = TM4ICR; - - TM5MD = TM5MD_SRC_TM4CASCADE; - TM5MD |= TM5MD_INIT_COUNTER; - TM5MD &= ~TM5MD_INIT_COUNTER; - TM5ICR = 0; - t32 = TM5ICR; - - TM5MD |= TM5MD_COUNT_ENABLE; - TM4MD |= TM4MD_COUNT_ENABLE; - t32 = TM5MD; - t32 = TM4MD; -} - -static inline void shutdown_timestamp_counter(void) -{ - u8 t8; - TM4MD = 0; - TM5MD = 0; - t8 = TM4MD; - t8 = TM5MD; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t)~TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c deleted file mode 100644 index 6f8de9954026..000000000000 --- a/arch/mn10300/unit-asb2305/leds.c +++ /dev/null @@ -1,124 +0,0 @@ -/* ASB2305 Peripheral 7-segment LEDs x4 support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -static const u8 asb2305_led_hex_tbl[16] = { - 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, - 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c -}; - -static const u32 asb2305_led_chase_tbl[6] = { - ~0x02020202, /* top - segA */ - ~0x04040404, /* right top - segB */ - ~0x08080808, /* right bottom - segC */ - ~0x10101010, /* bottom - segD */ - ~0x20202020, /* left bottom - segE */ - ~0x40404040, /* left top - segF */ -}; - -static unsigned asb2305_led_chase; - -void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) -{ - u32 leds; - - leds = asb2305_led_hex_tbl[(val/1000) % 10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[(val/100) % 10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[(val/10) % 10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[val % 10]; - leds |= points^0x01010101; - - ASB2305_7SEGLEDS = leds; -} - -void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) -{ - u32 leds; - - leds = asb2305_led_hex_tbl[(val/1000) % 10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[(val/100) % 10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[(val/10) % 10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[val % 10]; - leds |= points^0x01010101; - - ASB2305_7SEGLEDS = leds; -} - -void peripheral_leds_display_exception(enum exception_code code) -{ - u32 leds; - - leds = asb2305_led_hex_tbl[(code/0x100) % 0x10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[(code/0x10) % 0x10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[code % 0x10]; - leds |= 0x6d010101; - - ASB2305_7SEGLEDS = leds; -} - -void peripheral_leds7x4_display_minssecs(unsigned int time, unsigned int points) -{ - u32 leds; - - leds = asb2305_led_hex_tbl[(time/600) % 6]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[(time/60) % 10]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[(time/10) % 6]; - leds <<= 8; - leds |= asb2305_led_hex_tbl[time % 10]; - leds |= points^0x01010101; - - ASB2305_7SEGLEDS = leds; -} - -void peripheral_leds7x4_display_rtc(void) -{ - unsigned int clock; - u8 mins, secs; - - mins = RTMCR; - secs = RTSCR; - - clock = ((mins & 0xf0) >> 4); - clock *= 10; - clock += (mins & 0x0f); - clock *= 6; - - clock += ((secs & 0xf0) >> 4); - clock *= 10; - clock += (secs & 0x0f); - - peripheral_leds7x4_display_minssecs(clock, 0); -} - -void peripheral_leds_led_chase(void) -{ - ASB2305_7SEGLEDS = asb2305_led_chase_tbl[asb2305_led_chase]; - asb2305_led_chase++; - if (asb2305_led_chase >= 6) - asb2305_led_chase = 0; -} diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c deleted file mode 100644 index e0f4617c0c7a..000000000000 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ /dev/null @@ -1,212 +0,0 @@ -/* ASB2305 PCI resource stuff - * - * Copyright (C) 2001 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/i386/pci-i386.c - * - Copyright 1997--2000 Martin Mares - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include "pci-asb2305.h" - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - * - * Why? Because some silly external IO cards only decode - * the low 10 bits of the IO address. The 0x00-0xff region - * is reserved for motherboard devices that decode all 16 - * bits, so it's ok to allocate at, say, 0x2800-0x28ff, - * but we want to try to avoid allocating at 0x2900-0x2bff - * which might have be mirrored at 0x0100-0x03ff.. - */ -resource_size_t pcibios_align_resource(void *data, const struct resource *res, - resource_size_t size, resource_size_t align) -{ - resource_size_t start = res->start; - -#if 0 - struct pci_dev *dev = data; - - printk(KERN_DEBUG - "### PCIBIOS_ALIGN_RESOURCE(%s,,{%08lx-%08lx,%08lx},%lx)\n", - pci_name(dev), - res->start, - res->end, - res->flags, - size - ); -#endif - - if ((res->flags & IORESOURCE_IO) && (start & 0x300)) - start = (start + 0x3ff) & ~0x3ff; - - return start; -} - - -/* - * Handle resources of PCI devices. If the world were perfect, we could - * just allocate all the resource regions and do nothing more. It isn't. - * On the other hand, we cannot just re-allocate all devices, as it would - * require us to know lots of host bridge internals. So we attempt to - * keep as much of the original configuration as possible, but tweak it - * when it's found to be wrong. - * - * Known BIOS problems we have to work around: - * - I/O or memory regions not configured - * - regions configured, but not enabled in the command register - * - bogus I/O addresses above 64K used - * - expansion ROMs left enabled (this may sound harmless, but given - * the fact the PCI specs explicitly allow address decoders to be - * shared between expansion ROMs and other resource regions, it's - * at least dangerous) - * - * Our solution: - * (1) Allocate resources for all buses behind PCI-to-PCI bridges. - * This gives us fixed barriers on where we can allocate. - * (2) Allocate resources for all enabled devices. If there is - * a collision, just mark the resource as unallocated. Also - * disable expansion ROMs during this step. - * (3) Try to allocate resources for disabled devices. If the - * resources were assigned correctly, everything goes well, - * if they weren't, they won't disturb allocation of other - * resources. - * (4) Assign new addresses to resources which were either - * not configured at all or misconfigured. If explicitly - * requested by the user, configure expansion ROM address - * as well. - */ -static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) -{ - struct pci_bus *bus; - struct pci_dev *dev; - int idx; - struct resource *r; - - /* Depth-First Search on bus tree */ - list_for_each_entry(bus, bus_list, node) { - dev = bus->self; - if (dev) { - for (idx = PCI_BRIDGE_RESOURCES; - idx < PCI_NUM_RESOURCES; - idx++) { - r = &dev->resource[idx]; - if (!r->flags) - continue; - if (!r->start || - pci_claim_bridge_resource(dev, idx) < 0) { - printk(KERN_ERR "PCI:" - " Cannot allocate resource" - " region %d of bridge %s\n", - idx, pci_name(dev)); - /* Something is wrong with the region. - * Invalidate the resource to prevent - * child resource allocations in this - * range. */ - r->start = r->end = 0; - r->flags = 0; - } - } - } - pcibios_allocate_bus_resources(&bus->children); - } -} - -static void __init pcibios_allocate_resources(int pass) -{ - struct pci_dev *dev = NULL; - int idx, disabled; - u16 command; - struct resource *r; - - for_each_pci_dev(dev) { - pci_read_config_word(dev, PCI_COMMAND, &command); - for (idx = 0; idx < 6; idx++) { - r = &dev->resource[idx]; - if (r->parent) /* Already allocated */ - continue; - if (!r->start) /* Address not assigned */ - continue; - if (r->flags & IORESOURCE_IO) - disabled = !(command & PCI_COMMAND_IO); - else - disabled = !(command & PCI_COMMAND_MEMORY); - if (pass == disabled) { - DBG("PCI[%s]: Resource %08lx-%08lx" - " (f=%lx, d=%d, p=%d)\n", - pci_name(dev), r->start, r->end, r->flags, - disabled, pass); - if (pci_claim_resource(dev, idx) < 0) { - printk(KERN_ERR "PCI:" - " Cannot allocate resource" - " region %d of device %s\n", - idx, pci_name(dev)); - /* We'll assign a new address later */ - r->end -= r->start; - r->start = 0; - } - } - } - if (!pass) { - r = &dev->resource[PCI_ROM_RESOURCE]; - if (r->flags & IORESOURCE_ROM_ENABLE) { - /* Turn the ROM off, leave the resource region, - * but keep it unregistered. */ - u32 reg; - DBG("PCI: Switching off ROM of %s\n", - pci_name(dev)); - r->flags &= ~IORESOURCE_ROM_ENABLE; - pci_read_config_dword( - dev, dev->rom_base_reg, ®); - pci_write_config_dword( - dev, dev->rom_base_reg, - reg & ~PCI_ROM_ADDRESS_ENABLE); - } - } - } -} - -static int __init pcibios_assign_resources(void) -{ - struct pci_dev *dev = NULL; - struct resource *r; - - /* Try to use BIOS settings for ROMs, otherwise let - pci_assign_unassigned_resources() allocate the new - addresses. */ - for_each_pci_dev(dev) { - r = &dev->resource[PCI_ROM_RESOURCE]; - if (!r->flags || !r->start) - continue; - if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) { - r->end -= r->start; - r->start = 0; - } - } - - pci_assign_unassigned_resources(); - - return 0; -} - -fs_initcall(pcibios_assign_resources); - -void __init pcibios_resource_survey(void) -{ - DBG("PCI: Allocating resources\n"); - pcibios_allocate_bus_resources(&pci_root_buses); - pcibios_allocate_resources(0); - pcibios_allocate_resources(1); -} diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h deleted file mode 100644 index 0667f613b023..000000000000 --- a/arch/mn10300/unit-asb2305/pci-asb2305.h +++ /dev/null @@ -1,65 +0,0 @@ -/* ASB2305 Arch-specific PCI declarations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * Derived from: arch/i386/kernel/pci-i386.h: (c) 1999 Martin Mares - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _PCI_ASB2305_H -#define _PCI_ASB2305_H - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -extern unsigned int pci_probe; - -/* pci-asb2305.c */ - -extern void pcibios_resource_survey(void); - -/* pci.c */ - -extern struct pci_ops *pci_root_ops; - -/* pci-irq.c */ - -struct irq_info { - u8 bus, devfn; /* Bus, device and function */ - struct { - u8 link; /* IRQ line ID, chipset dependent, - * 0=not routed */ - u16 bitmap; /* Available IRQs */ - } __attribute__((packed)) irq[4]; - u8 slot; /* Slot number, 0=onboard */ - u8 rfu; -} __attribute__((packed)); - -struct irq_routing_table { - u32 signature; /* PIRQ_SIGNATURE should be here */ - u16 version; /* PIRQ_VERSION */ - u16 size; /* Table size in bytes */ - u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ - u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ - u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */ - u32 miniport_data; /* Crap */ - u8 rfu[11]; - u8 checksum; /* Modulo 256 checksum must give zero */ - struct irq_info slots[0]; -} __attribute__((packed)); - -extern unsigned int pcibios_irq_mask; - -extern void pcibios_irq_init(void); -extern void pcibios_fixup_irqs(void); -extern void pcibios_enable_irq(struct pci_dev *dev); - -#endif /* PCI_ASB2305_H */ diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c deleted file mode 100644 index fcb28ceb824d..000000000000 --- a/arch/mn10300/unit-asb2305/pci-irq.c +++ /dev/null @@ -1,46 +0,0 @@ -/* PCI IRQ routing on the MN103E010 based ASB2305 - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * This is simple: All PCI interrupts route through the CPU's XIRQ1 pin [IRQ 35] - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include "pci-asb2305.h" - -void __init pcibios_irq_init(void) -{ -} - -void __init pcibios_fixup_irqs(void) -{ - struct pci_dev *dev = NULL; - u8 line, pin; - - for_each_pci_dev(dev) { - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin) { - dev->irq = XIRQ1; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, - dev->irq); - } - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line); - } -} - -void pcibios_enable_irq(struct pci_dev *dev) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -} diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c deleted file mode 100644 index 3dfe2d31c67b..000000000000 --- a/arch/mn10300/unit-asb2305/pci.c +++ /dev/null @@ -1,505 +0,0 @@ -/* ASB2305 PCI support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * Derived from arch/i386/kernel/pci-pc.c - * (c) 1999--2000 Martin Mares - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pci-asb2305.h" - -unsigned int pci_probe = 1; - -struct pci_ops *pci_root_ops; - -/* - * The accessible PCI window does not cover the entire CPU address space, but - * there are devices we want to access outside of that window, so we need to - * insert specific PCI bus resources instead of using the platform-level bus - * resources directly for the PCI root bus. - * - * These are configured and inserted by pcibios_init(). - */ -static struct resource pci_ioport_resource = { - .name = "PCI IO", - .start = 0xbe000000, - .end = 0xbe03ffff, - .flags = IORESOURCE_IO, -}; - -static struct resource pci_iomem_resource = { - .name = "PCI mem", - .start = 0xb8000000, - .end = 0xbbffffff, - .flags = IORESOURCE_MEM, -}; - -/* - * Functions for accessing PCI configuration space - */ - -#define CONFIG_CMD(bus, devfn, where) \ - (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -#define MEM_PAGING_REG (*(volatile __u32 *) 0xBFFFFFF4) -#define CONFIG_ADDRESS (*(volatile __u32 *) 0xBFFFFFF8) -#define CONFIG_DATAL(X) (*(volatile __u32 *) 0xBFFFFFFC) -#define CONFIG_DATAW(X) (*(volatile __u16 *) (0xBFFFFFFC + ((X) & 2))) -#define CONFIG_DATAB(X) (*(volatile __u8 *) (0xBFFFFFFC + ((X) & 3))) - -#define BRIDGEREGB(X) (*(volatile __u8 *) (0xBE040000 + (X))) -#define BRIDGEREGW(X) (*(volatile __u16 *) (0xBE040000 + (X))) -#define BRIDGEREGL(X) (*(volatile __u32 *) (0xBE040000 + (X))) - -static inline int __query(const struct pci_bus *bus, unsigned int devfn) -{ -#if 0 - return bus->number == 0 && (devfn == PCI_DEVFN(0, 0)); - return bus->number == 1; - return bus->number == 0 && - (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0)); -#endif - return 1; -} - -/* - * - */ -static int pci_ampci_read_config_byte(struct pci_bus *bus, unsigned int devfn, - int where, u32 *_value) -{ - u32 rawval, value; - - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - value = BRIDGEREGB(where); - __pcbdebug("=> %02hx", &BRIDGEREGL(where), value); - } else { - CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where); - rawval = CONFIG_ADDRESS; - value = CONFIG_DATAB(where); - if (__query(bus, devfn)) - __pcidebug("=> %02hx", bus, devfn, where, value); - } - - *_value = value; - return PCIBIOS_SUCCESSFUL; -} - -static int pci_ampci_read_config_word(struct pci_bus *bus, unsigned int devfn, - int where, u32 *_value) -{ - u32 rawval, value; - - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - value = BRIDGEREGW(where); - __pcbdebug("=> %04hx", &BRIDGEREGL(where), value); - } else { - CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where); - rawval = CONFIG_ADDRESS; - value = CONFIG_DATAW(where); - if (__query(bus, devfn)) - __pcidebug("=> %04hx", bus, devfn, where, value); - } - - *_value = value; - return PCIBIOS_SUCCESSFUL; -} - -static int pci_ampci_read_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, u32 *_value) -{ - u32 rawval, value; - - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - value = BRIDGEREGL(where); - __pcbdebug("=> %08x", &BRIDGEREGL(where), value); - } else { - CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where); - rawval = CONFIG_ADDRESS; - value = CONFIG_DATAL(where); - if (__query(bus, devfn)) - __pcidebug("=> %08x", bus, devfn, where, value); - } - - *_value = value; - return PCIBIOS_SUCCESSFUL; -} - -static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn, - int where, u8 value) -{ - u32 rawval; - - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - __pcbdebug("<= %02x", &BRIDGEREGB(where), value); - BRIDGEREGB(where) = value; - } else { - if (bus->number == 0 && - (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0)) - ) - __pcidebug("<= %02x", bus, devfn, where, value); - CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where); - rawval = CONFIG_ADDRESS; - CONFIG_DATAB(where) = value; - } - return PCIBIOS_SUCCESSFUL; -} - -static int pci_ampci_write_config_word(struct pci_bus *bus, unsigned int devfn, - int where, u16 value) -{ - u32 rawval; - - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - __pcbdebug("<= %04hx", &BRIDGEREGW(where), value); - BRIDGEREGW(where) = value; - } else { - if (__query(bus, devfn)) - __pcidebug("<= %04hx", bus, devfn, where, value); - CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where); - rawval = CONFIG_ADDRESS; - CONFIG_DATAW(where) = value; - } - return PCIBIOS_SUCCESSFUL; -} - -static int pci_ampci_write_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, u32 value) -{ - u32 rawval; - - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - __pcbdebug("<= %08x", &BRIDGEREGL(where), value); - BRIDGEREGL(where) = value; - } else { - if (__query(bus, devfn)) - __pcidebug("<= %08x", bus, devfn, where, value); - CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where); - rawval = CONFIG_ADDRESS; - CONFIG_DATAL(where) = value; - } - return PCIBIOS_SUCCESSFUL; -} - -static int pci_ampci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - switch (size) { - case 1: - return pci_ampci_read_config_byte(bus, devfn, where, val); - case 2: - return pci_ampci_read_config_word(bus, devfn, where, val); - case 4: - return pci_ampci_read_config_dword(bus, devfn, where, val); - default: - BUG(); - return -EOPNOTSUPP; - } -} - -static int pci_ampci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - switch (size) { - case 1: - return pci_ampci_write_config_byte(bus, devfn, where, val); - case 2: - return pci_ampci_write_config_word(bus, devfn, where, val); - case 4: - return pci_ampci_write_config_dword(bus, devfn, where, val); - default: - BUG(); - return -EOPNOTSUPP; - } -} - -static struct pci_ops pci_direct_ampci = { - .read = pci_ampci_read_config, - .write = pci_ampci_write_config, -}; - -/* - * Before we decide to use direct hardware access mechanisms, we try to do some - * trivial checks to ensure it at least _seems_ to be working -- we just test - * whether bus 00 contains a host bridge (this is similar to checking - * techniques used in XFree86, but ours should be more reliable since we - * attempt to make use of direct access hints provided by the PCI BIOS). - * - * This should be close to trivial, but it isn't, because there are buggy - * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID. - */ -static int __init pci_sanity_check(struct pci_ops *o) -{ - struct pci_bus bus; /* Fake bus and device */ - u32 x; - - bus.number = 0; - - if ((!o->read(&bus, 0, PCI_CLASS_DEVICE, 2, &x) && - (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) || - (!o->read(&bus, 0, PCI_VENDOR_ID, 2, &x) && - (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ))) - return 1; - - printk(KERN_ERR "PCI: Sanity check failed\n"); - return 0; -} - -static int __init pci_check_direct(void) -{ - unsigned long flags; - - local_irq_save(flags); - - /* - * Check if access works. - */ - if (pci_sanity_check(&pci_direct_ampci)) { - local_irq_restore(flags); - printk(KERN_INFO "PCI: Using configuration ampci\n"); - request_mem_region(0xBE040000, 256, "AMPCI bridge"); - request_mem_region(0xBFFFFFF4, 12, "PCI ampci"); - request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM"); - return 0; - } - - local_irq_restore(flags); - return -ENODEV; -} - -static void pcibios_fixup_device_resources(struct pci_dev *dev) -{ - int idx; - - if (!dev->bus) - return; - - for (idx = 0; idx < PCI_BRIDGE_RESOURCES; idx++) { - struct resource *r = &dev->resource[idx]; - - if (!r->flags || r->parent || !r->start) - continue; - - pci_claim_resource(dev, idx); - } -} - -static void pcibios_fixup_bridge_resources(struct pci_dev *dev) -{ - int idx; - - if (!dev->bus) - return; - - for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { - struct resource *r = &dev->resource[idx]; - - if (!r->flags || r->parent || !r->start) - continue; - - pci_claim_bridge_resource(dev, idx); - } -} - -/* - * Called after each bus is probed, but before its children - * are examined. - */ -void pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_dev *dev; - - if (bus->self) { - pci_read_bridge_bases(bus); - pcibios_fixup_bridge_resources(bus->self); - } - - list_for_each_entry(dev, &bus->devices, bus_list) - pcibios_fixup_device_resources(dev); -} - -/* - * Initialization. Try all known PCI access methods. Note that we support - * using both PCI BIOS and direct access: in such cases, we use I/O ports - * to access config space, but we still keep BIOS order of cards to be - * compatible with 2.0.X. This should go away some day. - */ -static int __init pcibios_init(void) -{ - resource_size_t io_offset, mem_offset; - LIST_HEAD(resources); - struct pci_bus *bus; - - ioport_resource.start = 0xA0000000; - ioport_resource.end = 0xDFFFFFFF; - iomem_resource.start = 0xA0000000; - iomem_resource.end = 0xDFFFFFFF; - - if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0) - panic("Unable to insert PCI IOMEM resource\n"); - if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0) - panic("Unable to insert PCI IOPORT resource\n"); - - if (!pci_probe) - return 0; - - if (pci_check_direct() < 0) { - printk(KERN_WARNING "PCI: No PCI bus detected\n"); - return 0; - } - - printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n", - MEM_PAGING_REG); - - io_offset = pci_ioport_resource.start - - (pci_ioport_resource.start & 0x00ffffff); - mem_offset = pci_iomem_resource.start - - ((pci_iomem_resource.start & 0x03ffffff) | MEM_PAGING_REG); - - pci_add_resource_offset(&resources, &pci_ioport_resource, io_offset); - pci_add_resource_offset(&resources, &pci_iomem_resource, mem_offset); - bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources); - if (!bus) - return 0; - - pcibios_irq_init(); - pcibios_fixup_irqs(); - pcibios_resource_survey(); - pci_bus_add_devices(bus); - return 0; -} - -arch_initcall(pcibios_init); - -char *__init pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - - return str; -} - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - int err; - - err = pci_enable_resources(dev, mask); - if (err == 0) - pcibios_enable_irq(dev); - return err; -} - -/* - * disable the ethernet chipset - */ -static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o) -{ - u32 x; - - bus->number = 0; - - o->read (bus, PCI_DEVFN(2, 0), PCI_VENDOR_ID, 4, &x); - o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x); - x |= PCI_COMMAND_MASTER | - PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_SERR | PCI_COMMAND_PARITY; - o->write(bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, x); - o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x); - o->write(bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0, 4, 0x00030001); - o->read (bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0, 4, &x); - -#define RDP (*(volatile u32 *) 0xBE030010) -#define RAP (*(volatile u32 *) 0xBE030014) -#define __set_RAP(X) do { RAP = (X); x = RAP; } while (0) -#define __set_RDP(X) do { RDP = (X); x = RDP; } while (0) -#define __get_RDP() ({ RDP & 0xffff; }) - - __set_RAP(0); - __set_RDP(0x0004); /* CSR0 = STOP */ - - __set_RAP(88); /* check CSR88 indicates an Am79C973 */ - BUG_ON(__get_RDP() != 0x5003); - - for (x = 0; x < 100; x++) - asm volatile("nop"); - - __set_RDP(0x0004); /* CSR0 = STOP */ -} - -/* - * initialise the unit hardware - */ -asmlinkage void __init unit_pci_init(void) -{ - struct pci_bus bus; /* Fake bus and device */ - struct pci_ops *o = &pci_direct_ampci; - u32 x; - - set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_PCI_IRQ_LEVEL)); - - memset(&bus, 0, sizeof(bus)); - - MEM_PAGING_REG = 0xE8000000; - - /* we need to set up the bridge _now_ or we won't be able to access the - * PCI config registers - */ - BRIDGEREGW(PCI_COMMAND) |= - PCI_COMMAND_SERR | PCI_COMMAND_PARITY | - PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_MASTER; - BRIDGEREGW(PCI_STATUS) = 0xF800; - BRIDGEREGB(PCI_LATENCY_TIMER) = 0x10; - BRIDGEREGL(PCI_BASE_ADDRESS_0) = 0x80000000; - BRIDGEREGB(PCI_INTERRUPT_LINE) = 1; - BRIDGEREGL(0x48) = 0x98000000; /* AMPCI base addr */ - BRIDGEREGB(0x41) = 0x00; /* secondary bus - * number */ - BRIDGEREGB(0x42) = 0x01; /* subordinate bus - * number */ - BRIDGEREGB(0x44) = 0x01; - BRIDGEREGL(0x50) = 0x00000001; - BRIDGEREGL(0x58) = 0x00001002; - BRIDGEREGL(0x5C) = 0x00000011; - - /* we also need to set up the PCI-PCI bridge */ - bus.number = 0; - - /* IO: 0x00000000-0x00020000 */ - o->read (&bus, PCI_DEVFN(3, 0), PCI_COMMAND, 2, &x); - x |= PCI_COMMAND_MASTER | - PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_SERR | PCI_COMMAND_PARITY; - o->write(&bus, PCI_DEVFN(3, 0), PCI_COMMAND, 2, x); - - o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, &x); - o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, &x); - o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, &x); - o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, &x); - - o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, 0x01); - o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, &x); - o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, 0x00020000); - o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, &x); - o->write(&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, 0xEBB0EA00); - o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, &x); - o->write(&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, 0xE9F0E800); - o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, &x); - - unit_disable_pcnet(&bus, o); -} diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c deleted file mode 100644 index bc4adfaf815c..000000000000 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ /dev/null @@ -1,63 +0,0 @@ -/* ASB2305 Initialisation - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * initialise some of the unit hardware before gdbstub is set up - */ -asmlinkage void __init unit_init(void) -{ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - /* set the 16550 interrupt line to level 3 if not being used for GDB */ -#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL - set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); -#endif -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ -} - -/* - * initialise the rest of the unit hardware after gdbstub is ready - */ -void __init unit_setup(void) -{ -#ifdef CONFIG_PCI - unit_pci_init(); -#endif -} - -/* - * initialise the external interrupts used by a unit of this type - */ -void __init unit_init_IRQ(void) -{ - unsigned int extnum; - - for (extnum = 0; extnum < NR_XIRQS; extnum++) { - switch (GET_XIRQ_TRIGGER(extnum)) { - case XIRQ_TRIGGER_HILEVEL: - case XIRQ_TRIGGER_LOWLEVEL: - mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); - break; - default: - break; - } - } -} diff --git a/arch/mn10300/unit-asb2364/Makefile b/arch/mn10300/unit-asb2364/Makefile deleted file mode 100644 index b3263ecfc4ff..000000000000 --- a/arch/mn10300/unit-asb2364/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux kernel. -# -# Note! Dependencies are done automagically by 'make dep', which also -# removes any old dependencies. DON'T put your own dependencies here -# unless it's something special (ie not a .c file). -# -# Note 2! The CFLAGS definitions are now in the main makefile... - -obj-y := unit-init.o leds.o irq-fpga.o - -obj-$(CONFIG_SMSC911X) += smsc911x.o diff --git a/arch/mn10300/unit-asb2364/include/unit/clock.h b/arch/mn10300/unit-asb2364/include/unit/clock.h deleted file mode 100644 index d34ac9a7508b..000000000000 --- a/arch/mn10300/unit-asb2364/include/unit/clock.h +++ /dev/null @@ -1,29 +0,0 @@ -/* clock.h: unit-specific clocks - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * Modified by Matsushita Electric Industrial Co., Ltd. - * Modifications: - * 23-Feb-2007 MEI Add define for watchdog timer. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#define MN10300_IOCLK 100000000UL /* for DDR800 */ -/*#define MN10300_IOCLK 83333333UL */ /* for DDR667 */ -#define MN10300_IOBCLK MN10300_IOCLK /* IOBCLK is equal to IOCLK */ - -#endif /* !__ASSEMBLY__ */ - -#define MN10300_WDCLK 27000000UL - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h deleted file mode 100644 index 2901ed344b3d..000000000000 --- a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h +++ /dev/null @@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* ASB2364 FPGA registers - */ - -#ifndef _ASM_UNIT_FPGA_REGS_H -#define _ASM_UNIT_FPGA_REGS_H - -#include - -#ifdef __KERNEL__ - -#define ASB2364_FPGA_REG_RESET_LAN __SYSREG(0xa9001300, u16) -#define ASB2364_FPGA_REG_RESET_UART __SYSREG(0xa9001304, u16) -#define ASB2364_FPGA_REG_RESET_I2C __SYSREG(0xa9001308, u16) -#define ASB2364_FPGA_REG_RESET_USB __SYSREG(0xa900130c, u16) -#define ASB2364_FPGA_REG_RESET_AV __SYSREG(0xa9001310, u16) - -#define ASB2364_FPGA_REG_IRQ(X) __SYSREG(0xa9001510+((X)*4), u16) -#define ASB2364_FPGA_REG_IRQ_LAN ASB2364_FPGA_REG_IRQ(0) -#define ASB2364_FPGA_REG_IRQ_UART ASB2364_FPGA_REG_IRQ(1) -#define ASB2364_FPGA_REG_IRQ_I2C ASB2364_FPGA_REG_IRQ(2) -#define ASB2364_FPGA_REG_IRQ_USB ASB2364_FPGA_REG_IRQ(3) -#define ASB2364_FPGA_REG_IRQ_FPGA ASB2364_FPGA_REG_IRQ(5) - -#define ASB2364_FPGA_REG_MASK(X) __SYSREG(0xa9001590+((X)*4), u16) -#define ASB2364_FPGA_REG_MASK_LAN ASB2364_FPGA_REG_MASK(0) -#define ASB2364_FPGA_REG_MASK_UART ASB2364_FPGA_REG_MASK(1) -#define ASB2364_FPGA_REG_MASK_I2C ASB2364_FPGA_REG_MASK(2) -#define ASB2364_FPGA_REG_MASK_USB ASB2364_FPGA_REG_MASK(3) -#define ASB2364_FPGA_REG_MASK_FPGA ASB2364_FPGA_REG_MASK(5) - -#define ASB2364_FPGA_REG_CPLD5_SET1 __SYSREG(0xa9002500, u16) -#define ASB2364_FPGA_REG_CPLD5_SET2 __SYSREG(0xa9002504, u16) -#define ASB2364_FPGA_REG_CPLD6_SET1 __SYSREG(0xa9002600, u16) -#define ASB2364_FPGA_REG_CPLD6_SET2 __SYSREG(0xa9002604, u16) -#define ASB2364_FPGA_REG_CPLD7_SET1 __SYSREG(0xa9002700, u16) -#define ASB2364_FPGA_REG_CPLD7_SET2 __SYSREG(0xa9002704, u16) -#define ASB2364_FPGA_REG_CPLD8_SET1 __SYSREG(0xa9002800, u16) -#define ASB2364_FPGA_REG_CPLD8_SET2 __SYSREG(0xa9002804, u16) -#define ASB2364_FPGA_REG_CPLD9_SET1 __SYSREG(0xa9002900, u16) -#define ASB2364_FPGA_REG_CPLD9_SET2 __SYSREG(0xa9002904, u16) -#define ASB2364_FPGA_REG_CPLD10_SET1 __SYSREG(0xa9002a00, u16) -#define ASB2364_FPGA_REG_CPLD10_SET2 __SYSREG(0xa9002a04, u16) - -#define SyncExBus() \ - do { \ - unsigned short w; \ - w = *(volatile short *)0xa9000000; \ - } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_UNIT_FPGA_REGS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/irq.h b/arch/mn10300/unit-asb2364/include/unit/irq.h deleted file mode 100644 index 786148e46565..000000000000 --- a/arch/mn10300/unit-asb2364/include/unit/irq.h +++ /dev/null @@ -1,35 +0,0 @@ -/* ASB2364 FPGA irq numbers - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _UNIT_IRQ_H -#define _UNIT_IRQ_H - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_SMP -#define NR_CPU_IRQS GxICR_NUM_EXT_IRQS -#else -#define NR_CPU_IRQS GxICR_NUM_IRQS -#endif - -enum { - FPGA_LAN_IRQ = NR_CPU_IRQS, - FPGA_UART_IRQ, - FPGA_I2C_IRQ, - FPGA_USB_IRQ, - FPGA_RESERVED_IRQ, - FPGA_FPGA_IRQ, - NR_IRQS -}; - -extern void __init irq_fpga_init(void); - -#endif /* !__ASSEMBLY__ */ -#endif /* _UNIT_IRQ_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/leds.h b/arch/mn10300/unit-asb2364/include/unit/leds.h deleted file mode 100644 index 03a3933ad323..000000000000 --- a/arch/mn10300/unit-asb2364/include/unit/leds.h +++ /dev/null @@ -1,54 +0,0 @@ -/* Unit-specific leds - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include -#include -#include - -#define MN10300_USE_7SEGLEDS 0 - -#define ASB2364_7SEGLEDS __SYSREG(0xA9001630, u32) - -/* - * use the 7-segment LEDs to indicate states - */ - -#if MN10300_USE_7SEGLEDS -/* flip the 7-segment LEDs between "Gdb-" and "----" */ -#define mn10300_set_gdbleds(ONOFF) \ - do { \ - ASB2364_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ - } while (0) -#else -#define mn10300_set_gdbleds(ONOFF) do {} while (0) -#endif - -#if MN10300_USE_7SEGLEDS -/* indicate double-fault by displaying "db-f" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43077f1d,d0 ; \ - mov d0,(ASB2364_7SEGLEDS) -#else -#define mn10300_set_dbfleds -#endif - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code); -extern void peripheral_leds_led_chase(void); -extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); -extern void debug_to_serial(const char *, int); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/serial.h b/arch/mn10300/unit-asb2364/include/unit/serial.h deleted file mode 100644 index 92f224a97efc..000000000000 --- a/arch/mn10300/unit-asb2364/include/unit/serial.h +++ /dev/null @@ -1,151 +0,0 @@ -/* Unit-specific 8250 serial ports - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include -#include -#include -#include - -#define SERIAL_PORT0_BASE_ADDRESS 0xA8200000 - -#define SERIAL_IRQ XIRQ1 /* single serial (TL16C550C) (Lo) */ - -/* - * The ASB2364 has an 12.288 MHz clock - * for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD (12288000 / 16) - -/* - * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 1, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 2, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 2, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 2, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 2, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 2, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 2, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 2, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 2, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 2, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 2, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 2, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#error The ASB2364 does not have a /dev/ttyS1 -#endif - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - -#define LSR_WAIT_FOR(STATE) \ - do {} while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) -#define FLOWCTL_QUERY(LINE) \ - ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) -#define FLOWCTL_WAIT_FOR(LINE) \ - do {} while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) -#define FLOWCTL_CLEAR(LINE) \ - do { GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; } while (0) -#define FLOWCTL_SET(LINE) \ - do { GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; } while (0) - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - GDBPORT_SERIAL_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - GDBPORT_SERIAL_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_INITIALIZE \ -do { \ - /* release reset */ \ - ASB2364_FPGA_REG_RESET_UART = 0x0001; \ - SyncExBus(); \ -} while (0) - -#define SERIAL_CHECK_INTERRUPT \ -do { \ - if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) == 0x0001) { \ - return IRQ_NONE; \ - } \ -} while (0) - -#define SERIAL_CLEAR_INTERRUPT \ -do { \ - ASB2364_FPGA_REG_IRQ_UART = 0x0001; \ - SyncExBus(); \ -} while (0) - -#define SERIAL_SET_INT_MASK \ -do { \ - ASB2364_FPGA_REG_MASK_UART = 0x0001; \ - SyncExBus(); \ -} while (0) - -#define SERIAL_CLEAR_INT_MASK \ -do { \ - ASB2364_FPGA_REG_MASK_UART = 0x0000; \ - SyncExBus(); \ -} while (0) - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/smsc911x.h b/arch/mn10300/unit-asb2364/include/unit/smsc911x.h deleted file mode 100644 index 4c1ede535fa9..000000000000 --- a/arch/mn10300/unit-asb2364/include/unit/smsc911x.h +++ /dev/null @@ -1,171 +0,0 @@ -/* Support for the SMSC911x NIC - * - * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SMSC911X_H -#define _ASM_UNIT_SMSC911X_H - -#include -#include -#include - -#define MN10300_USE_EXT_EEPROM - - -#define SMSC911X_BASE 0xA8000000UL -#define SMSC911X_BASE_END 0xA8000100UL -#define SMSC911X_IRQ FPGA_LAN_IRQ - -/* - * Allow the FPGA to be initialised by the SMSC911x driver - */ -#undef SMSC_INITIALIZE -#define SMSC_INITIALIZE() \ -do { \ - /* release reset */ \ - ASB2364_FPGA_REG_RESET_LAN = 0x0001; \ - SyncExBus(); \ -} while (0) - -#ifdef MN10300_USE_EXT_EEPROM -#include -#include - -#define EEPROM_ADDRESS 0xA0 -#define MAC_OFFSET 0x0008 -#define USE_IIC_CH 0 /* 0 or 1 */ -#define IIC_OFFSET (0x80000 * USE_IIC_CH) -#define IIC_DTRM __SYSREG(0xd8400000 + IIC_OFFSET, u32) -#define IIC_DREC __SYSREG(0xd8400004 + IIC_OFFSET, u32) -#define IIC_MYADD __SYSREG(0xd8400008 + IIC_OFFSET, u32) -#define IIC_CLK __SYSREG(0xd840000c + IIC_OFFSET, u32) -#define IIC_BRST __SYSREG(0xd8400010 + IIC_OFFSET, u32) -#define IIC_HOLD __SYSREG(0xd8400014 + IIC_OFFSET, u32) -#define IIC_BSTS __SYSREG(0xd8400018 + IIC_OFFSET, u32) -#define IIC_ICR __SYSREG(0xd4000080 + 4 * USE_IIC_CH, u16) - -#define IIC_CLK_PLS ((unsigned short)(MN10300_IOCLK / 100000 - 1)) -#define IIC_CLK_LOW ((unsigned short)(IIC_CLK_PLS / 2)) - -#define SYS_IIC_DTRM_Bit_STA ((unsigned short)0x0400) -#define SYS_IIC_DTRM_Bit_STO ((unsigned short)0x0200) -#define SYS_IIC_DTRM_Bit_ACK ((unsigned short)0x0100) -#define SYS_IIC_DTRM_Bit_DATA ((unsigned short)0x00FF) - -static inline void POLL_INT_REQ(volatile u16 *icr) -{ - unsigned long flags; - u16 tmp; - - while (!(*icr & GxICR_REQUEST)) - ; - flags = arch_local_cli_save(); - tmp = *icr; - *icr = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = *icr; - arch_local_irq_restore(flags); -} - -/* - * Implement the SMSC911x hook for MAC address retrieval - */ -#undef smsc_get_mac -static inline int smsc_get_mac(struct net_device *dev) -{ - unsigned char *mac_buf = dev->dev_addr; - int i; - unsigned short value; - unsigned int data; - int mac_length = 6; - int check; - u16 orig_gicr, tmp; - unsigned long flags; - - /* save original GnICR and clear GnICR.IE */ - flags = arch_local_cli_save(); - orig_gicr = IIC_ICR; - IIC_ICR = orig_gicr & GxICR_LEVEL; - tmp = IIC_ICR; - arch_local_irq_restore(flags); - - IIC_MYADD = 0x00000008; - IIC_CLK = (IIC_CLK_LOW << 16) + (IIC_CLK_PLS); - /* bus hung recovery */ - - while (1) { - check = 0; - for (i = 0; i < 3; i++) { - if ((IIC_BSTS & 0x00000003) == 0x00000003) - check++; - udelay(3); - } - - if (check == 3) { - IIC_BRST = 0x00000003; - break; - } else { - for (i = 0; i < 3; i++) { - IIC_BRST = 0x00000002; - udelay(8); - IIC_BRST = 0x00000003; - udelay(8); - } - } - } - - IIC_BRST = 0x00000002; - IIC_BRST = 0x00000003; - - value = SYS_IIC_DTRM_Bit_STA | SYS_IIC_DTRM_Bit_ACK; - value |= (((unsigned short)EEPROM_ADDRESS & SYS_IIC_DTRM_Bit_DATA) | - (unsigned short)0x0000); - IIC_DTRM = value; - POLL_INT_REQ(&IIC_ICR); - - /** send offset of MAC address in EEPROM **/ - IIC_DTRM = (unsigned char)((MAC_OFFSET & 0xFF00) >> 8); - POLL_INT_REQ(&IIC_ICR); - - IIC_DTRM = (unsigned char)(MAC_OFFSET & 0x00FF); - POLL_INT_REQ(&IIC_ICR); - - udelay(1000); - - value = SYS_IIC_DTRM_Bit_STA; - value |= (((unsigned short)EEPROM_ADDRESS & SYS_IIC_DTRM_Bit_DATA) | - (unsigned short)0x0001); - IIC_DTRM = value; - POLL_INT_REQ(&IIC_ICR); - - IIC_DTRM = 0x00000000; - while (mac_length > 0) { - POLL_INT_REQ(&IIC_ICR); - - data = IIC_DREC; - mac_length--; - if (mac_length == 0) - value = 0x00000300; /* stop IIC bus */ - else if (mac_length == 1) - value = 0x00000100; /* no ack */ - else - value = 0x00000000; /* ack */ - IIC_DTRM = value; - *mac_buf++ = (unsigned char)(data & 0xff); - } - - /* restore GnICR.LV and GnICR.IE */ - flags = arch_local_cli_save(); - IIC_ICR = (orig_gicr & (GxICR_LEVEL | GxICR_ENABLE)); - tmp = IIC_ICR; - arch_local_irq_restore(flags); - - return 0; -} -#endif /* MN10300_USE_EXT_EEPROM */ -#endif /* _ASM_UNIT_SMSC911X_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h deleted file mode 100644 index 42f32db75087..000000000000 --- a/arch/mn10300/unit-asb2364/include/unit/timex.h +++ /dev/null @@ -1,155 +0,0 @@ -/* timex.h: MN2WS0038 architecture timer specifications - * - * Copyright (C) 2002, 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#include -#include -#include - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffffff /* 24bit */ -#define TMJCIRQ TMTIRQ - -#ifndef __ASSEMBLY__ - -#define MN10300_SRC_IOBCLK MN10300_IOBCLK - -#ifndef HZ -# error HZ undeclared. -#endif /* !HZ */ - -#define MN10300_JCCLK (MN10300_SRC_IOBCLK) -#define MN10300_TSCCLK (MN10300_SRC_IOBCLK) - -#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) -#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) - -/* Check bit width of MTM interval value that sets base register */ -#if (MN10300_JC_PER_HZ - 1) > TMJCBR_MAX -# error MTM tick timer interval value is overflow. -#endif - -static inline void stop_jiffies_counter(void) -{ - u16 tmp; - TMTMD = 0; - tmp = TMTMD; -} - -static inline void reload_jiffies_counter(u32 cnt) -{ - u32 tmp; - - TMTBR = cnt; - tmp = TMTBR; - - TMTMD = TMTMD_TMTLDE; - TMTMD = TMTMD_TMTCNE; - tmp = TMTMD; -} - -#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS) && \ - !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) -/* - * If we aren't using broadcasting, each core needs its own event timer. - * Since CPU0 uses the tick timer which is 24-bits, we use timer 4 & 5 - * cascaded to 32-bits for CPU1 (but only really use 24-bits to match - * CPU0). - */ - -#define TMJC1IRQ TM5IRQ - -static inline void stop_jiffies_counter1(void) -{ - u8 tmp; - TM4MD = 0; - TM5MD = 0; - tmp = TM4MD; - tmp = TM5MD; -} - -static inline void reload_jiffies_counter1(u32 cnt) -{ - u32 tmp; - - TM45BR = cnt; - tmp = TM45BR; - - TM4MD = TM4MD_INIT_COUNTER; - tmp = TM4MD; - - TM5MD = TM5MD_SRC_TM4CASCADE | TM5MD_INIT_COUNTER; - TM5MD = TM5MD_SRC_TM4CASCADE | TM5MD_COUNT_ENABLE; - tmp = TM5MD; - - TM4MD = TM4MD_COUNT_ENABLE; - tmp = TM4MD; -} -#endif /* CONFIG_SMP&GENERIC_CLOCKEVENTS&!GENERIC_CLOCKEVENTS_BROADCAST */ - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ -#define TMTSCBR_MAX 0xffffffff - -#ifndef __ASSEMBLY__ - -/* Use 32-bit timestamp counter */ -#define TMTSCMD TMSMD -#define TMTSCBR TMSBR -#define TMTSCBC TMSBC -#define TMTSCICR TMSICR - -static inline void startup_timestamp_counter(void) -{ - u32 sync; - - /* set up TMS(Timestamp) 32bit timer register to count real time - * - count down from 4Gig-1 to 0 and wrap at IOBCLK rate - */ - - TMTSCBR = TMTSCBR_MAX; - sync = TMTSCBR; - - TMTSCICR = 0; - sync = TMTSCICR; - - TMTSCMD = TMTMD_TMTLDE; - TMTSCMD = TMTMD_TMTCNE; - sync = TMTSCMD; -} - -static inline void shutdown_timestamp_counter(void) -{ - TMTSCMD = 0; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t)~TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2364/irq-fpga.c b/arch/mn10300/unit-asb2364/irq-fpga.c deleted file mode 100644 index 073e2ccc4a44..000000000000 --- a/arch/mn10300/unit-asb2364/irq-fpga.c +++ /dev/null @@ -1,108 +0,0 @@ -/* ASB2364 FPGA interrupt multiplexing - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include - -/* - * FPGA PIC operations - */ -static void asb2364_fpga_mask(struct irq_data *d) -{ - ASB2364_FPGA_REG_MASK(d->irq - NR_CPU_IRQS) = 0x0001; - SyncExBus(); -} - -static void asb2364_fpga_ack(struct irq_data *d) -{ - ASB2364_FPGA_REG_IRQ(d->irq - NR_CPU_IRQS) = 0x0001; - SyncExBus(); -} - -static void asb2364_fpga_mask_ack(struct irq_data *d) -{ - ASB2364_FPGA_REG_MASK(d->irq - NR_CPU_IRQS) = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_IRQ(d->irq - NR_CPU_IRQS) = 0x0001; - SyncExBus(); -} - -static void asb2364_fpga_unmask(struct irq_data *d) -{ - ASB2364_FPGA_REG_MASK(d->irq - NR_CPU_IRQS) = 0x0000; - SyncExBus(); -} - -static struct irq_chip asb2364_fpga_pic = { - .name = "fpga", - .irq_ack = asb2364_fpga_ack, - .irq_mask = asb2364_fpga_mask, - .irq_mask_ack = asb2364_fpga_mask_ack, - .irq_unmask = asb2364_fpga_unmask, -}; - -/* - * FPGA PIC interrupt handler - */ -static irqreturn_t fpga_interrupt(int irq, void *_mask) -{ - if ((ASB2364_FPGA_REG_IRQ_LAN & 0x0001) != 0x0001) - generic_handle_irq(FPGA_LAN_IRQ); - if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) != 0x0001) - generic_handle_irq(FPGA_UART_IRQ); - if ((ASB2364_FPGA_REG_IRQ_I2C & 0x0001) != 0x0001) - generic_handle_irq(FPGA_I2C_IRQ); - if ((ASB2364_FPGA_REG_IRQ_USB & 0x0001) != 0x0001) - generic_handle_irq(FPGA_USB_IRQ); - if ((ASB2364_FPGA_REG_IRQ_FPGA & 0x0001) != 0x0001) - generic_handle_irq(FPGA_FPGA_IRQ); - - return IRQ_HANDLED; -} - -/* - * Define an interrupt action for each FPGA PIC output - */ -static struct irqaction fpga_irq[] = { - [0] = { - .handler = fpga_interrupt, - .flags = IRQF_SHARED, - .name = "fpga", - }, -}; - -/* - * Initialise the FPGA's PIC - */ -void __init irq_fpga_init(void) -{ - int irq; - - ASB2364_FPGA_REG_MASK_LAN = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_MASK_UART = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_MASK_I2C = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_MASK_USB = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_MASK_FPGA = 0x0001; - SyncExBus(); - - for (irq = NR_CPU_IRQS; irq < NR_IRQS; irq++) - irq_set_chip_and_handler(irq, &asb2364_fpga_pic, - handle_level_irq); - - /* the FPGA drives the XIRQ1 input on the CPU PIC */ - setup_irq(XIRQ1, &fpga_irq[0]); -} diff --git a/arch/mn10300/unit-asb2364/leds.c b/arch/mn10300/unit-asb2364/leds.c deleted file mode 100644 index 1ff830c372b3..000000000000 --- a/arch/mn10300/unit-asb2364/leds.c +++ /dev/null @@ -1,98 +0,0 @@ -/* leds.c: ASB2364 peripheral 7seg LEDs x4 support - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include - -#include -#include -#include -#include -#include - -#if MN10300_USE_7SEGLEDS -static const u8 asb2364_led_hex_tbl[16] = { - 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, - 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c -}; - -static const u32 asb2364_led_chase_tbl[6] = { - ~0x02020202, /* top - segA */ - ~0x04040404, /* right top - segB */ - ~0x08080808, /* right bottom - segC */ - ~0x10101010, /* bottom - segD */ - ~0x20202020, /* left bottom - segE */ - ~0x40404040, /* left top - segF */ -}; - -static unsigned asb2364_led_chase; - -void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) -{ - u32 leds; - - leds = asb2364_led_hex_tbl[(val/1000) % 10]; - leds <<= 8; - leds |= asb2364_led_hex_tbl[(val/100) % 10]; - leds <<= 8; - leds |= asb2364_led_hex_tbl[(val/10) % 10]; - leds <<= 8; - leds |= asb2364_led_hex_tbl[val % 10]; - leds |= points^0x01010101; - - ASB2364_7SEGLEDS = leds; -} - -void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) -{ - u32 leds; - - leds = asb2364_led_hex_tbl[(val/1000) % 10]; - leds <<= 8; - leds |= asb2364_led_hex_tbl[(val/100) % 10]; - leds <<= 8; - leds |= asb2364_led_hex_tbl[(val/10) % 10]; - leds <<= 8; - leds |= asb2364_led_hex_tbl[val % 10]; - leds |= points^0x01010101; - - ASB2364_7SEGLEDS = leds; -} - -/* display triple horizontal bar and exception code */ -void peripheral_leds_display_exception(enum exception_code code) -{ - u32 leds; - - leds = asb2364_led_hex_tbl[(code/0x100) % 0x10]; - leds <<= 8; - leds |= asb2364_led_hex_tbl[(code/0x10) % 0x10]; - leds <<= 8; - leds |= asb2364_led_hex_tbl[code % 0x10]; - leds |= 0x6d010101; - - ASB2364_7SEGLEDS = leds; -} - -void peripheral_leds_led_chase(void) -{ - ASB2364_7SEGLEDS = asb2364_led_chase_tbl[asb2364_led_chase]; - asb2364_led_chase++; - if (asb2364_led_chase >= 6) - asb2364_led_chase = 0; -} -#else /* MN10300_USE_7SEGLEDS */ -void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) { } -void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) { } -void peripheral_leds_display_exception(enum exception_code code) { } -void peripheral_leds_led_chase(void) { } -#endif /* MN10300_USE_7SEGLEDS */ diff --git a/arch/mn10300/unit-asb2364/smsc911x.c b/arch/mn10300/unit-asb2364/smsc911x.c deleted file mode 100644 index 544a73e94c81..000000000000 --- a/arch/mn10300/unit-asb2364/smsc911x.c +++ /dev/null @@ -1,58 +0,0 @@ -/* Specification for the SMSC911x NIC - * - * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include - -static struct smsc911x_platform_config smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT, -}; - -static struct resource smsc911x_resources[] = { - [0] = { - .start = SMSC911X_BASE, - .end = SMSC911X_BASE_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SMSC911X_IRQ, - .end = SMSC911X_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smsc911x_device = { - .name = "smsc911x", - .id = 0, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_config, - } -}; - -/* - * add platform devices - */ -static int __init unit_device_init(void) -{ - platform_device_register(&smsc911x_device); - return 0; -} - -device_initcall(unit_device_init); diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c deleted file mode 100644 index 6359b41ce7e9..000000000000 --- a/arch/mn10300/unit-asb2364/unit-init.c +++ /dev/null @@ -1,132 +0,0 @@ -/* ASB2364 initialisation - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define TTYS0_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8) -#define LAN_IRQ_CFG __SYSREG(SMSC911X_BASE + 0x54, u32) -#define LAN_INT_EN __SYSREG(SMSC911X_BASE + 0x5c, u32) - -/* - * initialise some of the unit hardware before gdbstub is set up - */ -asmlinkage void __init unit_init(void) -{ - /* Make sure we aren't going to get unexpected interrupts */ - TTYS0_SERIAL_IER = 0; - SC0RXICR = 0; - SC0TXICR = 0; - SC1RXICR = 0; - SC1TXICR = 0; - SC2RXICR = 0; - SC2TXICR = 0; - - /* Attempt to reset the FPGA attached peripherals */ - ASB2364_FPGA_REG_RESET_LAN = 0x0000; - SyncExBus(); - ASB2364_FPGA_REG_RESET_UART = 0x0000; - SyncExBus(); - ASB2364_FPGA_REG_RESET_I2C = 0x0000; - SyncExBus(); - ASB2364_FPGA_REG_RESET_USB = 0x0000; - SyncExBus(); - ASB2364_FPGA_REG_RESET_AV = 0x0000; - SyncExBus(); - - /* set up the external interrupts */ - - /* XIRQ[0]: NAND RXBY */ - /* SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_LOWLEVEL); */ - - /* XIRQ[1]: LAN, UART, I2C, USB, PCI, FPGA */ - SET_XIRQ_TRIGGER(1, XIRQ_TRIGGER_LOWLEVEL); - - /* XIRQ[2]: Extend Slot 1-9 */ - /* SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL); */ - -#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) && \ - defined(CONFIG_ETHERNET_IRQ_LEVEL) && \ - (CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL) -# error CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL -#endif - -#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) - set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); -#elif defined(CONFIG_ETHERNET_IRQ_LEVEL) - set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); -#endif -} - -/* - * initialise the rest of the unit hardware after gdbstub is ready - */ -asmlinkage void __init unit_setup(void) -{ - /* Release the reset on the SMSC911X so that it is ready by the time we - * need it */ - ASB2364_FPGA_REG_RESET_LAN = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_RESET_UART = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_RESET_I2C = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_RESET_USB = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_RESET_AV = 0x0001; - SyncExBus(); - - /* Make sure the ethernet chipset isn't going to give us an interrupt - * storm from stuff it was doing pre-reset */ - LAN_IRQ_CFG = 0; - LAN_INT_EN = 0; -} - -/* - * initialise the external interrupts used by a unit of this type - */ -void __init unit_init_IRQ(void) -{ - unsigned int extnum; - - for (extnum = 0 ; extnum < NR_XIRQS ; extnum++) { - switch (GET_XIRQ_TRIGGER(extnum)) { - /* LEVEL triggered interrupts should be made - * post-ACK'able as they hold their lines until - * serviced - */ - case XIRQ_TRIGGER_HILEVEL: - case XIRQ_TRIGGER_LOWLEVEL: - mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); - break; - default: - break; - } - } - -#define IRQCTL __SYSREG(0xd5000090, u32) - IRQCTL |= 0x02; - - irq_fpga_init(); -} diff --git a/crypto/sha3_generic.c b/crypto/sha3_generic.c index ded148783303..264ec12c0b9c 100644 --- a/crypto/sha3_generic.c +++ b/crypto/sha3_generic.c @@ -21,7 +21,7 @@ #include /* - * On some 32-bit architectures (mn10300 and h8300), GCC ends up using + * On some 32-bit architectures (h8300), GCC ends up using * over 1 KB of stack if we inline the round calculation into the loop * in keccakf(). On the other hand, on 64-bit architectures with plenty * of [64-bit wide] general purpose registers, not inlining it severely diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index c868a878c84f..be1b4921f22a 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -163,7 +163,7 @@ static unsigned int get_time_pit(void) #define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "TSC" -#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE) +#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE) #define GET_TIME(x) do { x = get_cycles(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "get_cycles" diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig index 4c2f612e4414..948603e9b905 100644 --- a/drivers/net/ethernet/smsc/Kconfig +++ b/drivers/net/ethernet/smsc/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_SMSC bool "SMC (SMSC)/Western Digital devices" default y depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ - ISA || M32R || MAC || MIPS || MN10300 || NIOS2 || PCI || \ + ISA || M32R || MAC || MIPS || NIOS2 || PCI || \ PCMCIA || SUPERH || XTENSA || H8300 ---help--- If you have a network (Ethernet) card belonging to this class, say Y. @@ -38,7 +38,7 @@ config SMC91X select MII depends on !OF || GPIOLIB depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ - M32R || MIPS || MN10300 || NIOS2 || SUPERH || XTENSA || H8300 + M32R || MIPS || NIOS2 || SUPERH || XTENSA || H8300 ---help--- This is a driver for SMC's 91x series of Ethernet chipsets, including the SMC91C94 and the SMC91C111. Say Y if you want it @@ -77,7 +77,7 @@ config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 select MII - depends on (ARM || SUPERH || MN10300) + depends on (ARM || SUPERH) ---help--- This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118. diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 08b17adf0a65..8445622dc4cf 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -162,14 +162,6 @@ static inline void _SMC_outw_align4(u16 val, void __iomem *ioaddr, int reg, #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 -#elif defined(CONFIG_MN10300) - -/* - * MN10300/AM33 configuration - */ - -#include - #elif defined(CONFIG_ATARI) #define SMC_CAN_USE_8BIT 1 diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8ab5f0a5d323..be5a3dc99c11 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -868,7 +868,7 @@ comment "Platform RTC drivers" config RTC_DRV_CMOS tristate "PC-style 'CMOS'" - depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 || MN10300 + depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 default y if X86 select RTC_MC146818_LIB help diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 9dca53df3584..f7c0f72abb56 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -711,7 +711,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) address_space = 64; #elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \ || defined(__sparc__) || defined(__mips__) \ - || defined(__powerpc__) || defined(CONFIG_MN10300) + || defined(__powerpc__) address_space = 128; #else #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. diff --git a/drivers/staging/speakup/Kconfig b/drivers/staging/speakup/Kconfig index 7e8037e230b8..efd6f4560d3e 100644 --- a/drivers/staging/speakup/Kconfig +++ b/drivers/staging/speakup/Kconfig @@ -1,7 +1,7 @@ menu "Speakup console speech" config SPEAKUP - depends on VT && !MN10300 + depends on VT tristate "Speakup core" ---help--- This is the Speakup screen reader. Think of it as a diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 7f1f1fbcef9e..005ed87c8216 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -7,7 +7,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EXPERT || !X86 depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \ - !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \ + !SUPERH && !BLACKFIN && !AVR32 && !CRIS && \ (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \ !ARM64 && !ARC && !MICROBLAZE && !OPENRISC default y diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h index 3f38eb03649c..abe6dd9ca2a8 100644 --- a/include/asm-generic/atomic.h +++ b/include/asm-generic/atomic.h @@ -2,8 +2,6 @@ * Generic C implementation of atomic counter operations. Usable on * UP systems only. Do not include in machine independent code. * - * Originally implemented for MN10300. - * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * diff --git a/include/asm-generic/barrier.h b/include/asm-generic/barrier.h index fe297b599b0a..29458bbb2fa0 100644 --- a/include/asm-generic/barrier.h +++ b/include/asm-generic/barrier.h @@ -1,5 +1,5 @@ /* - * Generic barrier definitions, originally based on MN10300 definitions. + * Generic barrier definitions. * * It should be possible to use these on really simple architectures, * but it serves more as a starting point for new ports. diff --git a/include/asm-generic/exec.h b/include/asm-generic/exec.h index 567766b0074a..32c0a216f576 100644 --- a/include/asm-generic/exec.h +++ b/include/asm-generic/exec.h @@ -1,4 +1,4 @@ -/* Generic process execution definitions, based on MN10300 definitions. +/* Generic process execution definitions. * * It should be possible to use these on really simple architectures, * but it serves more as a starting point for new ports. diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index b4531e3b2120..fe184b9bb6ea 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -1,4 +1,4 @@ -/* Generic I/O port emulation, based on MN10300 code +/* Generic I/O port emulation. * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/asm-generic/pci_iomap.h b/include/asm-generic/pci_iomap.h index 854f96ad5ccb..d4f16dcc2ed7 100644 --- a/include/asm-generic/pci_iomap.h +++ b/include/asm-generic/pci_iomap.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0+ */ -/* Generic I/O port emulation, based on MN10300 code +/* Generic I/O port emulation. * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/asm-generic/switch_to.h b/include/asm-generic/switch_to.h index 052c4ac04fd5..986acc9d34bb 100644 --- a/include/asm-generic/switch_to.h +++ b/include/asm-generic/switch_to.h @@ -1,4 +1,4 @@ -/* Generic task switch macro wrapper, based on MN10300 definitions. +/* Generic task switch macro wrapper. * * It should be possible to use these on really simple architectures, * but it serves more as a starting point for new ports. diff --git a/include/linux/ide.h b/include/linux/ide.h index 771989d25ef8..20d42c0d9fb6 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -25,7 +25,7 @@ #include #include -#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300) +#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) # define SUPPORT_VLB_SYNC 0 #else # define SUPPORT_VLB_SYNC 1 diff --git a/init/Kconfig b/init/Kconfig index e37f4b2a6445..a14bcc9724a2 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1108,7 +1108,7 @@ config MULTIUSER config SGETMASK_SYSCALL bool "sgetmask/ssetmask syscalls support" if EXPERT - def_bool PARISC || MN10300 || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH + def_bool PARISC || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH ---help--- sys_sgetmask and sys_ssetmask are obsolete system calls no longer supported in libc but still enabled by default in some diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index d5964b051017..41ac9d294245 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -356,7 +356,7 @@ config FRAME_POINTER bool "Compile the kernel with frame pointers" depends on DEBUG_KERNEL && \ (CRIS || M68K || FRV || UML || \ - SUPERH || BLACKFIN || MN10300) || \ + SUPERH || BLACKFIN) || \ ARCH_WANT_FRAME_POINTERS default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS help diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c index 4621db801b23..a6556f3364d1 100644 --- a/lib/test_user_copy.c +++ b/lib/test_user_copy.c @@ -35,7 +35,6 @@ !defined(CONFIG_M32R) && \ !defined(CONFIG_M68K) && \ !defined(CONFIG_MICROBLAZE) && \ - !defined(CONFIG_MN10300) && \ !defined(CONFIG_NIOS2) && \ !defined(CONFIG_PPC32) && \ !defined(CONFIG_SUPERH)) diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 9917f928d0fd..4ff08a0ef5d3 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -840,8 +840,7 @@ static const char *const section_white_list[] = ".debug*", ".cranges", /* sh64 */ ".zdebug*", /* Compressed debug sections. */ - ".GCC-command-line", /* mn10300 */ - ".GCC.command.line", /* record-gcc-switches, non mn10300 */ + ".GCC.command.line", /* record-gcc-switches */ ".mdebug*", /* alpha, score, mips etc. */ ".pdr", /* alpha, score, mips etc. */ ".stab*", @@ -1104,8 +1103,8 @@ static const struct sectioncheck *section_mismatch( /* * The target section could be the SHT_NUL section when we're * handling relocations to un-resolved symbols, trying to match it - * doesn't make much sense and causes build failures on parisc and - * mn10300 architectures. + * doesn't make much sense and causes build failures on parisc + * architectures. */ if (*tosec == '\0') return NULL; diff --git a/tools/arch/mn10300/include/uapi/asm/bitsperlong.h b/tools/arch/mn10300/include/uapi/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b2..000000000000 --- a/tools/arch/mn10300/include/uapi/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/tools/arch/mn10300/include/uapi/asm/mman.h b/tools/arch/mn10300/include/uapi/asm/mman.h deleted file mode 100644 index b9360639974f..000000000000 --- a/tools/arch/mn10300/include/uapi/asm/mman.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef TOOLS_ARCH_MN10300_UAPI_ASM_MMAN_FIX_H -#define TOOLS_ARCH_MN10300_UAPI_ASM_MMAN_FIX_H -#include -/* MAP_32BIT is undefined on mn10300, fix it for perf */ -#define MAP_32BIT 0 -#endif diff --git a/tools/include/asm-generic/barrier.h b/tools/include/asm-generic/barrier.h index 47b933903eaf..52278d880a61 100644 --- a/tools/include/asm-generic/barrier.h +++ b/tools/include/asm-generic/barrier.h @@ -1,7 +1,7 @@ /* * Copied from the kernel sources to tools/perf/: * - * Generic barrier definitions, originally based on MN10300 definitions. + * Generic barrier definitions. * * It should be possible to use these on really simple architectures, * but it serves more as a starting point for new ports. -- cgit v1.2.3-58-ga151 From 1c4bfce1c6045a7c5191949f6bd74662fb9bf02d Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 10 Mar 2018 10:16:41 -0800 Subject: Input: stmpe-keypad - remove VLA usage In preparation to enabling -Wvla, remove VLA and replace it with a fixed-length array instead. Fixed as part of the directive to remove all VLAs from the kernel: https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/stmpe-keypad.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c index 8c6c0b9109c7..d69e631cfa0a 100644 --- a/drivers/input/keyboard/stmpe-keypad.c +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -48,6 +48,14 @@ #define STMPE_KEYPAD_KEYMAP_MAX_SIZE \ (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS) + +#define STMPE1601_NUM_DATA 5 +#define STMPE2401_NUM_DATA 3 +#define STMPE2403_NUM_DATA 5 + +/* Make sure it covers all cases above */ +#define MAX_NUM_DATA 5 + /** * struct stmpe_keypad_variant - model-specific attributes * @auto_increment: whether the KPC_DATA_BYTE register address @@ -74,7 +82,7 @@ struct stmpe_keypad_variant { static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { [STMPE1601] = { .auto_increment = true, - .num_data = 5, + .num_data = STMPE1601_NUM_DATA, .num_normal_data = 3, .max_cols = 8, .max_rows = 8, @@ -84,7 +92,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { [STMPE2401] = { .auto_increment = false, .set_pullup = true, - .num_data = 3, + .num_data = STMPE2401_NUM_DATA, .num_normal_data = 2, .max_cols = 8, .max_rows = 12, @@ -94,7 +102,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { [STMPE2403] = { .auto_increment = true, .set_pullup = true, - .num_data = 5, + .num_data = STMPE2403_NUM_DATA, .num_normal_data = 3, .max_cols = 8, .max_rows = 12, @@ -156,7 +164,7 @@ static irqreturn_t stmpe_keypad_irq(int irq, void *dev) struct stmpe_keypad *keypad = dev; struct input_dev *input = keypad->input; const struct stmpe_keypad_variant *variant = keypad->variant; - u8 fifo[variant->num_data]; + u8 fifo[MAX_NUM_DATA]; int ret; int i; -- cgit v1.2.3-58-ga151 From f2d6fdbfd2389a38598d448cb8dc09d946c1b87e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 1 Mar 2018 17:33:34 +0100 Subject: Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior Now that the MONOTONIC and BOOTTIME clocks are indentical, remove all the special casing. The user space visible interfaces still support both clocks, but their behavior is identical. Signed-off-by: Thomas Gleixner Cc: Dmitry Torokhov Cc: John Stultz Cc: Jonathan Corbet Cc: Kevin Easton Cc: Linus Torvalds Cc: Mark Salyzyn Cc: Michael Kerrisk Cc: Peter Zijlstra Cc: Petr Mladek Cc: Prarit Bhargava Cc: Sergey Senozhatsky Cc: Steven Rostedt Cc: linux-input@vger.kernel.org Link: http://lkml.kernel.org/r/20180301165150.155899327@linutronix.de Signed-off-by: Ingo Molnar --- drivers/input/evdev.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index c81c79d01d93..46115a392098 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -31,7 +31,6 @@ enum evdev_clock_type { EV_CLK_REAL = 0, EV_CLK_MONO, - EV_CLK_BOOT, EV_CLK_MAX }; @@ -198,12 +197,10 @@ static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid) case CLOCK_REALTIME: clk_type = EV_CLK_REAL; break; + case CLOCK_BOOTTIME: case CLOCK_MONOTONIC: clk_type = EV_CLK_MONO; break; - case CLOCK_BOOTTIME: - clk_type = EV_CLK_BOOT; - break; default: return -EINVAL; } @@ -314,8 +311,6 @@ static void evdev_events(struct input_handle *handle, ev_time[EV_CLK_MONO] = ktime_get(); ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]); - ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO], - TK_OFFS_BOOT); rcu_read_lock(); -- cgit v1.2.3-58-ga151 From c9ab800167e1fc7b87a069b85b53a7eef414b4ae Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 14 Mar 2018 09:38:47 -0700 Subject: Input: analog - use get_cycles() on PPC The analog joystick driver spits a warning at us: drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer not defined for this architecture. PPC has get_cycles() so use that. Signed-off-by: Michael Ellerman Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/analog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index c868a878c84f..a942c4ccd2af 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -163,7 +163,7 @@ static unsigned int get_time_pit(void) #define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "TSC" -#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE) +#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_PPC) || defined(CONFIG_RISCV) || defined(CONFIG_TILE) #define GET_TIME(x) do { x = get_cycles(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "get_cycles" -- cgit v1.2.3-58-ga151 From 3993a16309c7efc93dee772a9279a34bc88cdcb5 Mon Sep 17 00:00:00 2001 From: Maruyama Shohei Date: Wed, 14 Mar 2018 09:55:24 -0700 Subject: Input: silead - add Chuwi Hi8 support This commit add ACPI support for Chuwi Hi8 tablet. On the ACPI table of the tablet, GSL1680 is registered as MSSL0001, so the driver does not recognize the device. This commit resolve it. Signed-off-by: Shohei Maruyama Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/silead.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 646b1e768e6b..ff7043f74a3d 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -602,6 +602,7 @@ static const struct acpi_device_id silead_ts_acpi_match[] = { { "GSL3675", 0 }, { "GSL3692", 0 }, { "MSSL1680", 0 }, + { "MSSL0001", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match); -- cgit v1.2.3-58-ga151 From a687a5337063af99ebd0eebaa6f4b4cf2e07c21b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 7 Mar 2018 23:30:54 +0100 Subject: treewide: simplify Kconfig dependencies for removed archs A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Acked-by: Kalle Valo Acked-by: Alexandre Belloni Signed-off-by: Arnd Bergmann --- block/bounce.c | 2 +- drivers/ide/Kconfig | 2 +- drivers/ide/ide-generic.c | 12 +----------- drivers/input/joystick/analog.c | 2 +- drivers/isdn/hisax/Kconfig | 10 +++++----- drivers/net/ethernet/davicom/Kconfig | 2 +- drivers/net/ethernet/smsc/Kconfig | 6 +++--- drivers/net/wireless/cisco/Kconfig | 2 +- drivers/pwm/Kconfig | 2 +- drivers/rtc/Kconfig | 2 +- drivers/spi/Kconfig | 4 ++-- drivers/usb/musb/Kconfig | 2 +- drivers/video/console/Kconfig | 3 +-- drivers/watchdog/Kconfig | 6 ------ drivers/watchdog/Makefile | 6 ------ fs/Kconfig.binfmt | 5 ++--- fs/minix/Kconfig | 2 +- include/linux/ide.h | 7 +------ init/Kconfig | 5 ++--- lib/Kconfig.debug | 13 +++++-------- lib/test_user_copy.c | 2 -- mm/Kconfig | 7 ------- mm/percpu.c | 4 ---- 23 files changed, 31 insertions(+), 77 deletions(-) (limited to 'drivers/input') diff --git a/block/bounce.c b/block/bounce.c index 6a3e68292273..dd0b93f2a871 100644 --- a/block/bounce.c +++ b/block/bounce.c @@ -31,7 +31,7 @@ static struct bio_set *bounce_bio_set, *bounce_bio_split; static mempool_t *page_pool, *isa_page_pool; -#if defined(CONFIG_HIGHMEM) || defined(CONFIG_NEED_BOUNCE_POOL) +#if defined(CONFIG_HIGHMEM) static __init int init_emergency_pool(void) { #if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cf1fb3fb5d26..901b8833847f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -200,7 +200,7 @@ comment "IDE chipset support/bugfixes" config IDE_GENERIC tristate "generic/default IDE chipset support" - depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC + depends on ALPHA || X86 || IA64 || MIPS || ARCH_RPC default ARM && ARCH_RPC help This is the generic IDE driver. This driver attaches to the diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 54d7c4685d23..80c0d69b83ac 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -13,13 +13,10 @@ #include #include -/* FIXME: convert arm and m32r to use ide_platform host driver */ +/* FIXME: convert arm to use ide_platform host driver */ #ifdef CONFIG_ARM #include #endif -#ifdef CONFIG_M32R -#include -#endif #define DRV_NAME "ide_generic" @@ -35,13 +32,6 @@ static const struct ide_port_info ide_generic_port_info = { #ifdef CONFIG_ARM static const u16 legacy_bases[] = { 0x1f0 }; static const int legacy_irqs[] = { IRQ_HARDDISK }; -#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \ - defined(CONFIG_PLAT_OPSPUT) -static const u16 legacy_bases[] = { 0x1f0 }; -static const int legacy_irqs[] = { PLD_IRQ_CFIREQ }; -#elif defined(CONFIG_PLAT_MAPPI3) -static const u16 legacy_bases[] = { 0x1f0, 0x170 }; -static const int legacy_irqs[] = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ }; #elif defined(CONFIG_ALPHA) static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 }; static const int legacy_irqs[] = { 14, 15, 11, 10 }; diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index be1b4921f22a..eefac7978f93 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -163,7 +163,7 @@ static unsigned int get_time_pit(void) #define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "TSC" -#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE) +#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) #define GET_TIME(x) do { x = get_cycles(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "get_cycles" diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index eb83d94ab4fe..38cfc8baae19 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -109,7 +109,7 @@ config HISAX_16_3 config HISAX_TELESPCI bool "Teles PCI" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the Teles PCI. See on how to configure it. @@ -237,7 +237,7 @@ config HISAX_MIC config HISAX_NETJET bool "NETjet card" - depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) + depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) depends on VIRT_TO_BUS help This enables HiSax support for the NetJet from Traverse @@ -249,7 +249,7 @@ config HISAX_NETJET config HISAX_NETJET_U bool "NETspider U card" - depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) + depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) depends on VIRT_TO_BUS help This enables HiSax support for the Netspider U interface ISDN card @@ -318,7 +318,7 @@ config HISAX_GAZEL config HISAX_HFC_PCI bool "HFC PCI-Bus cards" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the HFC-S PCI 2BDS0 based cards. @@ -343,7 +343,7 @@ config HISAX_HFC_SX config HISAX_ENTERNOW_PCI bool "Formula-n enter:now PCI card" - depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) + depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the Formula-n enter:now PCI ISDN card. diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig index 7ec2d74f94d3..680a6d983f37 100644 --- a/drivers/net/ethernet/davicom/Kconfig +++ b/drivers/net/ethernet/davicom/Kconfig @@ -4,7 +4,7 @@ config DM9000 tristate "DM9000 support" - depends on ARM || BLACKFIN || MIPS || COLDFIRE || NIOS2 + depends on ARM || MIPS || COLDFIRE || NIOS2 select CRC32 select MII ---help--- diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig index 948603e9b905..3da0c573d2ab 100644 --- a/drivers/net/ethernet/smsc/Kconfig +++ b/drivers/net/ethernet/smsc/Kconfig @@ -5,8 +5,8 @@ config NET_VENDOR_SMSC bool "SMC (SMSC)/Western Digital devices" default y - depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ - ISA || M32R || MAC || MIPS || NIOS2 || PCI || \ + depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \ + ISA || MAC || MIPS || NIOS2 || PCI || \ PCMCIA || SUPERH || XTENSA || H8300 ---help--- If you have a network (Ethernet) card belonging to this class, say Y. @@ -37,7 +37,7 @@ config SMC91X select CRC32 select MII depends on !OF || GPIOLIB - depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ + depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \ M32R || MIPS || NIOS2 || SUPERH || XTENSA || H8300 ---help--- This is a driver for SMC's 91x series of Ethernet chipsets, diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig index b22567dff893..8ed0b154bb33 100644 --- a/drivers/net/wireless/cisco/Kconfig +++ b/drivers/net/wireless/cisco/Kconfig @@ -33,7 +33,7 @@ config AIRO config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on CFG80211 && PCMCIA && (BROKEN || !M32R) + depends on CFG80211 && PCMCIA select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 763ee50ea57d..f16aad3bf5d6 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -43,7 +43,7 @@ config PWM_AB8500 config PWM_ATMEL tristate "Atmel PWM support" - depends on ARCH_AT91 || AVR32 + depends on ARCH_AT91 help Generic PWM framework driver for Atmel SoC. diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index be5a3dc99c11..46af10ac45fc 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -868,7 +868,7 @@ comment "Platform RTC drivers" config RTC_DRV_CMOS tristate "PC-style 'CMOS'" - depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 + depends on X86 || ARM || PPC || MIPS || SPARC64 default y if X86 select RTC_MC146818_LIB help diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 603783976b81..103c13fcefa0 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -72,10 +72,10 @@ config SPI_ARMADA_3700 config SPI_ATMEL tristate "Atmel SPI Controller" depends on HAS_DMA - depends on (ARCH_AT91 || AVR32 || COMPILE_TEST) + depends on ARCH_AT91 || COMPILE_TEST help This selects a driver for the Atmel SPI Controller, present on - many AT32 (AVR32) and AT91 (ARM) chips. + many AT91 ARM chips. config SPI_AU1550 tristate "Au1550/Au1200/Au1300 SPI Controller" diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 5506a9c03c1f..e757afc1cfd0 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -87,7 +87,7 @@ config USB_MUSB_DA8XX config USB_MUSB_TUSB6010 tristate "TUSB6010" depends on HAS_IOMEM - depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN + depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules config USB_MUSB_OMAP2PLUS diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 005ed87c8216..a9e398c144f8 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,8 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EXPERT || !X86 - depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \ - !SUPERH && !BLACKFIN && !AVR32 && !CRIS && \ + depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \ (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \ !ARM64 && !ARC && !MICROBLAZE && !OPENRISC default y diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 0e19679348d1..79020ce95de2 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -828,10 +828,6 @@ config BFIN_WDT To compile this driver as a module, choose M here: the module will be called bfin_wdt. -# CRIS Architecture - -# FRV Architecture - # X86 (i386 + ia64 + x86_64) Architecture config ACQUIRE_WDT @@ -1431,8 +1427,6 @@ config NIC7018_WDT To compile this driver as a module, choose M here: the module will be called nic7018_wdt. -# M32R Architecture - # M68K Architecture config M54xx_WATCHDOG diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 0474d38aa854..1f9a0235f22c 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -94,10 +94,6 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o # BLACKFIN Architecture obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o -# CRIS Architecture - -# FRV Architecture - # X86 (i386 + ia64 + x86_64) Architecture obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o @@ -146,8 +142,6 @@ obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o -# M32R Architecture - # M68K Architecture obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 58c2bbd385ad..57a27c42b5ac 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -1,6 +1,6 @@ config BINFMT_ELF bool "Kernel support for ELF binaries" - depends on MMU && (BROKEN || !FRV) + depends on MMU select ELFCORE default y ---help--- @@ -35,7 +35,7 @@ config ARCH_BINFMT_ELF_STATE config BINFMT_ELF_FDPIC bool "Kernel support for FDPIC ELF binaries" default y if !BINFMT_ELF - depends on (ARM || FRV || BLACKFIN || (SUPERH32 && !MMU) || C6X) + depends on (ARM || (SUPERH32 && !MMU) || C6X) select ELFCORE help ELF FDPIC binaries are based on ELF, but allow the individual load @@ -90,7 +90,6 @@ config BINFMT_SCRIPT config BINFMT_FLAT bool "Kernel support for flat binaries" depends on !MMU || ARM || M68K - depends on !FRV || BROKEN help Support uClinux FLAT format binaries. diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig index f2a0cfcef11d..bcd53a79156f 100644 --- a/fs/minix/Kconfig +++ b/fs/minix/Kconfig @@ -18,7 +18,7 @@ config MINIX_FS config MINIX_FS_NATIVE_ENDIAN def_bool MINIX_FS - depends on M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU) + depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU) config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED def_bool MINIX_FS diff --git a/include/linux/ide.h b/include/linux/ide.h index 20d42c0d9fb6..1d6f16110eae 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -25,15 +25,10 @@ #include #include -#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) -# define SUPPORT_VLB_SYNC 0 -#else -# define SUPPORT_VLB_SYNC 1 -#endif - /* * Probably not wise to fiddle with these */ +#define SUPPORT_VLB_SYNC 1 #define IDE_DEFAULT_MAX_FAILURES 1 #define ERROR_MAX 8 /* Max read/write errors per sector */ #define ERROR_RESET 3 /* Reset controller every 4th retry */ diff --git a/init/Kconfig b/init/Kconfig index a14bcc9724a2..2852692d7c9c 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -998,7 +998,6 @@ config RELAY config BLK_DEV_INITRD bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support" - depends on BROKEN || !FRV help The initial RAM filesystem is a ramfs which is loaded by the boot loader (loadlin or lilo) and that is mounted as root @@ -1108,7 +1107,7 @@ config MULTIUSER config SGETMASK_SYSCALL bool "sgetmask/ssetmask syscalls support" if EXPERT - def_bool PARISC || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH + def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH ---help--- sys_sgetmask and sys_ssetmask are obsolete system calls no longer supported in libc but still enabled by default in some @@ -1370,7 +1369,7 @@ config KALLSYMS_ABSOLUTE_PERCPU config KALLSYMS_BASE_RELATIVE bool depends on KALLSYMS - default !IA64 && !(TILE && 64BIT) + default !IA64 help Instead of emitting them as absolute values in the native word size, emit the symbol references in the kallsyms table as 32-bit entries, diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 41ac9d294245..6927c6d8d185 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -165,7 +165,7 @@ config DEBUG_INFO_REDUCED config DEBUG_INFO_SPLIT bool "Produce split debuginfo in .dwo files" - depends on DEBUG_INFO && !FRV + depends on DEBUG_INFO help Generate debug info into separate .dwo files. This significantly reduces the build directory size for builds with DEBUG_INFO, @@ -354,10 +354,7 @@ config ARCH_WANT_FRAME_POINTERS config FRAME_POINTER bool "Compile the kernel with frame pointers" - depends on DEBUG_KERNEL && \ - (CRIS || M68K || FRV || UML || \ - SUPERH || BLACKFIN) || \ - ARCH_WANT_FRAME_POINTERS + depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS help If you say Y here the resulting kernel image will be slightly @@ -1138,7 +1135,7 @@ config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !SCORE && !X86 + select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !X86 select KALLSYMS select KALLSYMS_ALL @@ -1571,7 +1568,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT depends on !X86_64 select STACKTRACE - select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !SCORE && !X86 + select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86 help Provide stacktrace filter for fault-injection capabilities @@ -1969,7 +1966,7 @@ config STRICT_DEVMEM bool "Filter access to /dev/mem" depends on MMU && DEVMEM depends on ARCH_HAS_DEVMEM_IS_ALLOWED - default y if TILE || PPC || X86 || ARM64 + default y if PPC || X86 || ARM64 ---help--- If this option is disabled, you allow userspace (root) access to all of memory, including kernel and userspace memory. Accidental diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c index a6556f3364d1..e161f0498f42 100644 --- a/lib/test_user_copy.c +++ b/lib/test_user_copy.c @@ -31,8 +31,6 @@ * their capability at compile-time, we just have to opt-out certain archs. */ #if BITS_PER_LONG == 64 || (!(defined(CONFIG_ARM) && !defined(MMU)) && \ - !defined(CONFIG_BLACKFIN) && \ - !defined(CONFIG_M32R) && \ !defined(CONFIG_M68K) && \ !defined(CONFIG_MICROBLAZE) && \ !defined(CONFIG_NIOS2) && \ diff --git a/mm/Kconfig b/mm/Kconfig index abefa573bcd8..d5004d82a1d6 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -278,13 +278,6 @@ config BOUNCE by default when ZONE_DMA or HIGHMEM is selected, but you may say n to override this. -# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often -# have more than 4GB of memory, but we don't currently use the IOTLB to present -# a 32-bit address to OHCI. So we need to use a bounce pool instead. -config NEED_BOUNCE_POOL - bool - default y if TILE && USB_OHCI_HCD - config NR_QUICK int depends on QUICKLIST diff --git a/mm/percpu.c b/mm/percpu.c index 50e7fdf84055..79e3549cab0f 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -2719,11 +2719,7 @@ void __init setup_per_cpu_areas(void) if (pcpu_setup_first_chunk(ai, fc) < 0) panic("Failed to initialize percpu areas."); -#ifdef CONFIG_CRIS -#warning "the CRIS architecture has physical and virtual addresses confused" -#else pcpu_free_alloc_info(ai); -#endif } #endif /* CONFIG_SMP */ -- cgit v1.2.3-58-ga151 From 01b7649598c6ad36d07b037ecf6548f6c7fdd083 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 9 Mar 2018 18:11:52 +0100 Subject: input: keyboard: remove bf54x driver The blackfin architecture is getting removed, so this driver is now obsolete. Acked-by: Dmitry Torokhov Signed-off-by: Arnd Bergmann --- drivers/input/keyboard/Kconfig | 9 - drivers/input/keyboard/Makefile | 1 - drivers/input/keyboard/bf54x-keys.c | 396 ------------------------------------ 3 files changed, 406 deletions(-) delete mode 100644 drivers/input/keyboard/bf54x-keys.c (limited to 'drivers/input') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 4c4ab1ced235..2b469cc47a78 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -157,15 +157,6 @@ config KEYBOARD_QT2160 This driver can also be built as a module. If so, the module will be called qt2160. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) - help - Say Y here if you want to use the BF54x keypad. - - To compile this driver as a module, choose M here: the - module will be called bf54x-keys. - config KEYBOARD_CLPS711X tristate "CLPS711X Keypad support" depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST) diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 526e68294e6e..8fab920afa58 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BCM) += bcm-keypad.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c deleted file mode 100644 index 8a07a426f88e..000000000000 --- a/drivers/input/keyboard/bf54x-keys.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * File: drivers/input/keyboard/bf54x-keys.c - * Based on: - * Author: Michael Hennerich - * - * Created: - * Description: keypad driver for Analog Devices Blackfin BF54x Processors - * - * - * Modified: - * Copyright 2007-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_NAME "bf54x-keys" -#define TIME_SCALE 100 /* 100 ns */ -#define MAX_MULT (0xFF * TIME_SCALE) -#define MAX_RC 8 /* Max Row/Col */ - -static const u16 per_rows[] = { - P_KEY_ROW7, - P_KEY_ROW6, - P_KEY_ROW5, - P_KEY_ROW4, - P_KEY_ROW3, - P_KEY_ROW2, - P_KEY_ROW1, - P_KEY_ROW0, - 0 -}; - -static const u16 per_cols[] = { - P_KEY_COL7, - P_KEY_COL6, - P_KEY_COL5, - P_KEY_COL4, - P_KEY_COL3, - P_KEY_COL2, - P_KEY_COL1, - P_KEY_COL0, - 0 -}; - -struct bf54x_kpad { - struct input_dev *input; - int irq; - unsigned short lastkey; - unsigned short *keycode; - struct timer_list timer; - unsigned int keyup_test_jiffies; - unsigned short kpad_msel; - unsigned short kpad_prescale; - unsigned short kpad_ctl; -}; - -static inline int bfin_kpad_find_key(struct bf54x_kpad *bf54x_kpad, - struct input_dev *input, u16 keyident) -{ - u16 i; - - for (i = 0; i < input->keycodemax; i++) - if (bf54x_kpad->keycode[i + input->keycodemax] == keyident) - return bf54x_kpad->keycode[i]; - return -1; -} - -static inline void bfin_keycodecpy(unsigned short *keycode, - const unsigned int *pdata_kc, - unsigned short keymapsize) -{ - unsigned int i; - - for (i = 0; i < keymapsize; i++) { - keycode[i] = pdata_kc[i] & 0xffff; - keycode[i + keymapsize] = pdata_kc[i] >> 16; - } -} - -static inline u16 bfin_kpad_get_prescale(u32 timescale) -{ - u32 sclk = get_sclk(); - - return ((((sclk / 1000) * timescale) / 1024) - 1); -} - -static inline u16 bfin_kpad_get_keypressed(struct bf54x_kpad *bf54x_kpad) -{ - return (bfin_read_KPAD_STAT() & KPAD_PRESSED); -} - -static inline void bfin_kpad_clear_irq(void) -{ - bfin_write_KPAD_STAT(0xFFFF); - bfin_write_KPAD_ROWCOL(0xFFFF); -} - -static void bfin_kpad_timer(struct timer_list *t) -{ - struct bf54x_kpad *bf54x_kpad = from_timer(bf54x_kpad, t, timer); - - if (bfin_kpad_get_keypressed(bf54x_kpad)) { - /* Try again later */ - mod_timer(&bf54x_kpad->timer, - jiffies + bf54x_kpad->keyup_test_jiffies); - return; - } - - input_report_key(bf54x_kpad->input, bf54x_kpad->lastkey, 0); - input_sync(bf54x_kpad->input); - - /* Clear IRQ Status */ - - bfin_kpad_clear_irq(); - enable_irq(bf54x_kpad->irq); -} - -static irqreturn_t bfin_kpad_isr(int irq, void *dev_id) -{ - struct platform_device *pdev = dev_id; - struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev); - struct input_dev *input = bf54x_kpad->input; - int key; - u16 rowcol = bfin_read_KPAD_ROWCOL(); - - key = bfin_kpad_find_key(bf54x_kpad, input, rowcol); - - input_report_key(input, key, 1); - input_sync(input); - - if (bfin_kpad_get_keypressed(bf54x_kpad)) { - disable_irq_nosync(bf54x_kpad->irq); - bf54x_kpad->lastkey = key; - mod_timer(&bf54x_kpad->timer, - jiffies + bf54x_kpad->keyup_test_jiffies); - } else { - input_report_key(input, key, 0); - input_sync(input); - - bfin_kpad_clear_irq(); - } - - return IRQ_HANDLED; -} - -static int bfin_kpad_probe(struct platform_device *pdev) -{ - struct bf54x_kpad *bf54x_kpad; - struct bfin_kpad_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct input_dev *input; - int i, error; - - if (!pdata->rows || !pdata->cols || !pdata->keymap) { - dev_err(&pdev->dev, "no rows, cols or keymap from pdata\n"); - return -EINVAL; - } - - if (!pdata->keymapsize || - pdata->keymapsize > (pdata->rows * pdata->cols)) { - dev_err(&pdev->dev, "invalid keymapsize\n"); - return -EINVAL; - } - - bf54x_kpad = kzalloc(sizeof(struct bf54x_kpad), GFP_KERNEL); - if (!bf54x_kpad) - return -ENOMEM; - - platform_set_drvdata(pdev, bf54x_kpad); - - /* Allocate memory for keymap followed by private LUT */ - bf54x_kpad->keycode = kmalloc(pdata->keymapsize * - sizeof(unsigned short) * 2, GFP_KERNEL); - if (!bf54x_kpad->keycode) { - error = -ENOMEM; - goto out; - } - - if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT || - !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) { - dev_warn(&pdev->dev, - "invalid platform debounce/columndrive time\n"); - bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */ - } else { - bfin_write_KPAD_MSEL( - ((pdata->debounce_time / TIME_SCALE) - & DBON_SCALE) | - (((pdata->coldrive_time / TIME_SCALE) << 8) - & COLDRV_SCALE)); - - } - - if (!pdata->keyup_test_interval) - bf54x_kpad->keyup_test_jiffies = msecs_to_jiffies(50); - else - bf54x_kpad->keyup_test_jiffies = - msecs_to_jiffies(pdata->keyup_test_interval); - - if (peripheral_request_list((u16 *)&per_rows[MAX_RC - pdata->rows], - DRV_NAME)) { - dev_err(&pdev->dev, "requesting peripherals failed\n"); - error = -EFAULT; - goto out0; - } - - if (peripheral_request_list((u16 *)&per_cols[MAX_RC - pdata->cols], - DRV_NAME)) { - dev_err(&pdev->dev, "requesting peripherals failed\n"); - error = -EFAULT; - goto out1; - } - - bf54x_kpad->irq = platform_get_irq(pdev, 0); - if (bf54x_kpad->irq < 0) { - error = -ENODEV; - goto out2; - } - - error = request_irq(bf54x_kpad->irq, bfin_kpad_isr, - 0, DRV_NAME, pdev); - if (error) { - dev_err(&pdev->dev, "unable to claim irq %d\n", - bf54x_kpad->irq); - goto out2; - } - - input = input_allocate_device(); - if (!input) { - error = -ENOMEM; - goto out3; - } - - bf54x_kpad->input = input; - - input->name = pdev->name; - input->phys = "bf54x-keys/input0"; - input->dev.parent = &pdev->dev; - - input->id.bustype = BUS_HOST; - input->id.vendor = 0x0001; - input->id.product = 0x0001; - input->id.version = 0x0100; - - input->keycodesize = sizeof(unsigned short); - input->keycodemax = pdata->keymapsize; - input->keycode = bf54x_kpad->keycode; - - bfin_keycodecpy(bf54x_kpad->keycode, pdata->keymap, pdata->keymapsize); - - /* setup input device */ - __set_bit(EV_KEY, input->evbit); - - if (pdata->repeat) - __set_bit(EV_REP, input->evbit); - - for (i = 0; i < input->keycodemax; i++) - if (bf54x_kpad->keycode[i] <= KEY_MAX) - __set_bit(bf54x_kpad->keycode[i], input->keybit); - __clear_bit(KEY_RESERVED, input->keybit); - - error = input_register_device(input); - if (error) { - dev_err(&pdev->dev, "unable to register input device\n"); - goto out4; - } - - /* Init Keypad Key Up/Release test timer */ - - timer_setup(&bf54x_kpad->timer, bfin_kpad_timer, 0); - - bfin_write_KPAD_PRESCALE(bfin_kpad_get_prescale(TIME_SCALE)); - - bfin_write_KPAD_CTL((((pdata->cols - 1) << 13) & KPAD_COLEN) | - (((pdata->rows - 1) << 10) & KPAD_ROWEN) | - (2 & KPAD_IRQMODE)); - - bfin_write_KPAD_CTL(bfin_read_KPAD_CTL() | KPAD_EN); - - device_init_wakeup(&pdev->dev, 1); - - return 0; - -out4: - input_free_device(input); -out3: - free_irq(bf54x_kpad->irq, pdev); -out2: - peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]); -out1: - peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]); -out0: - kfree(bf54x_kpad->keycode); -out: - kfree(bf54x_kpad); - - return error; -} - -static int bfin_kpad_remove(struct platform_device *pdev) -{ - struct bfin_kpad_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev); - - del_timer_sync(&bf54x_kpad->timer); - free_irq(bf54x_kpad->irq, pdev); - - input_unregister_device(bf54x_kpad->input); - - peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]); - peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]); - - kfree(bf54x_kpad->keycode); - kfree(bf54x_kpad); - - return 0; -} - -#ifdef CONFIG_PM -static int bfin_kpad_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev); - - bf54x_kpad->kpad_msel = bfin_read_KPAD_MSEL(); - bf54x_kpad->kpad_prescale = bfin_read_KPAD_PRESCALE(); - bf54x_kpad->kpad_ctl = bfin_read_KPAD_CTL(); - - if (device_may_wakeup(&pdev->dev)) - enable_irq_wake(bf54x_kpad->irq); - - return 0; -} - -static int bfin_kpad_resume(struct platform_device *pdev) -{ - struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev); - - bfin_write_KPAD_MSEL(bf54x_kpad->kpad_msel); - bfin_write_KPAD_PRESCALE(bf54x_kpad->kpad_prescale); - bfin_write_KPAD_CTL(bf54x_kpad->kpad_ctl); - - if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(bf54x_kpad->irq); - - return 0; -} -#else -# define bfin_kpad_suspend NULL -# define bfin_kpad_resume NULL -#endif - -static struct platform_driver bfin_kpad_device_driver = { - .driver = { - .name = DRV_NAME, - }, - .probe = bfin_kpad_probe, - .remove = bfin_kpad_remove, - .suspend = bfin_kpad_suspend, - .resume = bfin_kpad_resume, -}; -module_platform_driver(bfin_kpad_device_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("Keypad driver for BF54x Processors"); -MODULE_ALIAS("platform:bf54x-keys"); -- cgit v1.2.3-58-ga151 From c957ea5c797cfccffeee92e0af8e0e99212dd755 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 9 Mar 2018 17:24:55 +0100 Subject: input: misc: remove blackfin rotary driver The blackfin architecture is getting removed, so this one is obsolete as well. Acked-by: Dmitry Torokhov Acked-by: Aaron Wu Signed-off-by: Arnd Bergmann --- drivers/input/misc/Kconfig | 9 - drivers/input/misc/Makefile | 1 - drivers/input/misc/bfin_rotary.c | 294 ------------------------------ include/linux/platform_data/bfin_rotary.h | 117 ------------ 4 files changed, 421 deletions(-) delete mode 100644 drivers/input/misc/bfin_rotary.c delete mode 100644 include/linux/platform_data/bfin_rotary.h (limited to 'drivers/input') diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 62a1312a7387..e9770f5e3f77 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -655,15 +655,6 @@ config INPUT_DM355EVM To compile this driver as a module, choose M here: the module will be called dm355evm_keys. -config INPUT_BFIN_ROTARY - tristate "Blackfin Rotary support" - depends on BF54x || BF52x - help - Say Y here if you want to use the Blackfin Rotary. - - To compile this driver as a module, choose M here: the - module will be called bfin-rotary. - config INPUT_WM831X_ON tristate "WM831X ON pin" depends on MFD_WM831X diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index a8f61af865aa..eb9c6c3ec530 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o -obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o obj-$(CONFIG_INPUT_BMA150) += bma150.o obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c deleted file mode 100644 index 799ce3d2820e..000000000000 --- a/drivers/input/misc/bfin_rotary.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Rotary counter driver for Analog Devices Blackfin Processors - * - * Copyright 2008-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define CNT_CONFIG_OFF 0 /* CNT Config Offset */ -#define CNT_IMASK_OFF 4 /* CNT Interrupt Mask Offset */ -#define CNT_STATUS_OFF 8 /* CNT Status Offset */ -#define CNT_COMMAND_OFF 12 /* CNT Command Offset */ -#define CNT_DEBOUNCE_OFF 16 /* CNT Debounce Offset */ -#define CNT_COUNTER_OFF 20 /* CNT Counter Offset */ -#define CNT_MAX_OFF 24 /* CNT Maximum Count Offset */ -#define CNT_MIN_OFF 28 /* CNT Minimum Count Offset */ - -struct bfin_rot { - struct input_dev *input; - void __iomem *base; - int irq; - unsigned int up_key; - unsigned int down_key; - unsigned int button_key; - unsigned int rel_code; - - unsigned short mode; - unsigned short debounce; - - unsigned short cnt_config; - unsigned short cnt_imask; - unsigned short cnt_debounce; -}; - -static void report_key_event(struct input_dev *input, int keycode) -{ - /* simulate a press-n-release */ - input_report_key(input, keycode, 1); - input_sync(input); - input_report_key(input, keycode, 0); - input_sync(input); -} - -static void report_rotary_event(struct bfin_rot *rotary, int delta) -{ - struct input_dev *input = rotary->input; - - if (rotary->up_key) { - report_key_event(input, - delta > 0 ? rotary->up_key : rotary->down_key); - } else { - input_report_rel(input, rotary->rel_code, delta); - input_sync(input); - } -} - -static irqreturn_t bfin_rotary_isr(int irq, void *dev_id) -{ - struct bfin_rot *rotary = dev_id; - int delta; - - switch (readw(rotary->base + CNT_STATUS_OFF)) { - - case ICII: - break; - - case UCII: - case DCII: - delta = readl(rotary->base + CNT_COUNTER_OFF); - if (delta) - report_rotary_event(rotary, delta); - break; - - case CZMII: - report_key_event(rotary->input, rotary->button_key); - break; - - default: - break; - } - - writew(W1LCNT_ZERO, rotary->base + CNT_COMMAND_OFF); /* Clear COUNTER */ - writew(-1, rotary->base + CNT_STATUS_OFF); /* Clear STATUS */ - - return IRQ_HANDLED; -} - -static int bfin_rotary_open(struct input_dev *input) -{ - struct bfin_rot *rotary = input_get_drvdata(input); - unsigned short val; - - if (rotary->mode & ROT_DEBE) - writew(rotary->debounce & DPRESCALE, - rotary->base + CNT_DEBOUNCE_OFF); - - writew(rotary->mode & ~CNTE, rotary->base + CNT_CONFIG_OFF); - - val = UCIE | DCIE; - if (rotary->button_key) - val |= CZMIE; - writew(val, rotary->base + CNT_IMASK_OFF); - - writew(rotary->mode | CNTE, rotary->base + CNT_CONFIG_OFF); - - return 0; -} - -static void bfin_rotary_close(struct input_dev *input) -{ - struct bfin_rot *rotary = input_get_drvdata(input); - - writew(0, rotary->base + CNT_CONFIG_OFF); - writew(0, rotary->base + CNT_IMASK_OFF); -} - -static void bfin_rotary_free_action(void *data) -{ - peripheral_free_list(data); -} - -static int bfin_rotary_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - const struct bfin_rotary_platform_data *pdata = dev_get_platdata(dev); - struct bfin_rot *rotary; - struct resource *res; - struct input_dev *input; - int error; - - /* Basic validation */ - if ((pdata->rotary_up_key && !pdata->rotary_down_key) || - (!pdata->rotary_up_key && pdata->rotary_down_key)) { - return -EINVAL; - } - - if (pdata->pin_list) { - error = peripheral_request_list(pdata->pin_list, - dev_name(dev)); - if (error) { - dev_err(dev, "requesting peripherals failed: %d\n", - error); - return error; - } - - error = devm_add_action_or_reset(dev, bfin_rotary_free_action, - pdata->pin_list); - if (error) { - dev_err(dev, "setting cleanup action failed: %d\n", - error); - return error; - } - } - - rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL); - if (!rotary) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - rotary->base = devm_ioremap_resource(dev, res); - if (IS_ERR(rotary->base)) - return PTR_ERR(rotary->base); - - input = devm_input_allocate_device(dev); - if (!input) - return -ENOMEM; - - rotary->input = input; - - rotary->up_key = pdata->rotary_up_key; - rotary->down_key = pdata->rotary_down_key; - rotary->button_key = pdata->rotary_button_key; - rotary->rel_code = pdata->rotary_rel_code; - - rotary->mode = pdata->mode; - rotary->debounce = pdata->debounce; - - input->name = pdev->name; - input->phys = "bfin-rotary/input0"; - input->dev.parent = dev; - - input_set_drvdata(input, rotary); - - input->id.bustype = BUS_HOST; - input->id.vendor = 0x0001; - input->id.product = 0x0001; - input->id.version = 0x0100; - - input->open = bfin_rotary_open; - input->close = bfin_rotary_close; - - if (rotary->up_key) { - __set_bit(EV_KEY, input->evbit); - __set_bit(rotary->up_key, input->keybit); - __set_bit(rotary->down_key, input->keybit); - } else { - __set_bit(EV_REL, input->evbit); - __set_bit(rotary->rel_code, input->relbit); - } - - if (rotary->button_key) { - __set_bit(EV_KEY, input->evbit); - __set_bit(rotary->button_key, input->keybit); - } - - /* Quiesce the device before requesting irq */ - bfin_rotary_close(input); - - rotary->irq = platform_get_irq(pdev, 0); - if (rotary->irq < 0) { - dev_err(dev, "No rotary IRQ specified\n"); - return -ENOENT; - } - - error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr, - 0, dev_name(dev), rotary); - if (error) { - dev_err(dev, "unable to claim irq %d; error %d\n", - rotary->irq, error); - return error; - } - - error = input_register_device(input); - if (error) { - dev_err(dev, "unable to register input device (%d)\n", error); - return error; - } - - platform_set_drvdata(pdev, rotary); - device_init_wakeup(dev, 1); - - return 0; -} - -static int __maybe_unused bfin_rotary_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bfin_rot *rotary = platform_get_drvdata(pdev); - - rotary->cnt_config = readw(rotary->base + CNT_CONFIG_OFF); - rotary->cnt_imask = readw(rotary->base + CNT_IMASK_OFF); - rotary->cnt_debounce = readw(rotary->base + CNT_DEBOUNCE_OFF); - - if (device_may_wakeup(&pdev->dev)) - enable_irq_wake(rotary->irq); - - return 0; -} - -static int __maybe_unused bfin_rotary_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bfin_rot *rotary = platform_get_drvdata(pdev); - - writew(rotary->cnt_debounce, rotary->base + CNT_DEBOUNCE_OFF); - writew(rotary->cnt_imask, rotary->base + CNT_IMASK_OFF); - writew(rotary->cnt_config & ~CNTE, rotary->base + CNT_CONFIG_OFF); - - if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(rotary->irq); - - if (rotary->cnt_config & CNTE) - writew(rotary->cnt_config, rotary->base + CNT_CONFIG_OFF); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(bfin_rotary_pm_ops, - bfin_rotary_suspend, bfin_rotary_resume); - -static struct platform_driver bfin_rotary_device_driver = { - .probe = bfin_rotary_probe, - .driver = { - .name = "bfin-rotary", - .pm = &bfin_rotary_pm_ops, - }, -}; -module_platform_driver(bfin_rotary_device_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("Rotary Counter driver for Blackfin Processors"); -MODULE_ALIAS("platform:bfin-rotary"); diff --git a/include/linux/platform_data/bfin_rotary.h b/include/linux/platform_data/bfin_rotary.h deleted file mode 100644 index 98829370fee2..000000000000 --- a/include/linux/platform_data/bfin_rotary.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * board initialization should put one of these structures into platform_data - * and place the bfin-rotary onto platform_bus named "bfin-rotary". - * - * Copyright 2008-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _BFIN_ROTARY_H -#define _BFIN_ROTARY_H - -/* mode bitmasks */ -#define ROT_QUAD_ENC CNTMODE_QUADENC /* quadrature/grey code encoder mode */ -#define ROT_BIN_ENC CNTMODE_BINENC /* binary encoder mode */ -#define ROT_UD_CNT CNTMODE_UDCNT /* rotary counter mode */ -#define ROT_DIR_CNT CNTMODE_DIRCNT /* direction counter mode */ - -#define ROT_DEBE DEBE /* Debounce Enable */ - -#define ROT_CDGINV CDGINV /* CDG Pin Polarity Invert */ -#define ROT_CUDINV CUDINV /* CUD Pin Polarity Invert */ -#define ROT_CZMINV CZMINV /* CZM Pin Polarity Invert */ - -struct bfin_rotary_platform_data { - /* set rotary UP KEY_### or BTN_### in case you prefer - * bfin-rotary to send EV_KEY otherwise set 0 - */ - unsigned int rotary_up_key; - /* set rotary DOWN KEY_### or BTN_### in case you prefer - * bfin-rotary to send EV_KEY otherwise set 0 - */ - unsigned int rotary_down_key; - /* set rotary BUTTON KEY_### or BTN_### */ - unsigned int rotary_button_key; - /* set rotary Relative Axis REL_### in case you prefer - * bfin-rotary to send EV_REL otherwise set 0 - */ - unsigned int rotary_rel_code; - unsigned short debounce; /* 0..17 */ - unsigned short mode; - unsigned short pm_wakeup; - unsigned short *pin_list; -}; - -/* CNT_CONFIG bitmasks */ -#define CNTE (1 << 0) /* Counter Enable */ -#define DEBE (1 << 1) /* Debounce Enable */ -#define CDGINV (1 << 4) /* CDG Pin Polarity Invert */ -#define CUDINV (1 << 5) /* CUD Pin Polarity Invert */ -#define CZMINV (1 << 6) /* CZM Pin Polarity Invert */ -#define CNTMODE_SHIFT 8 -#define CNTMODE (0x7 << CNTMODE_SHIFT) /* Counter Operating Mode */ -#define ZMZC (1 << 1) /* CZM Zeroes Counter Enable */ -#define BNDMODE_SHIFT 12 -#define BNDMODE (0x3 << BNDMODE_SHIFT) /* Boundary register Mode */ -#define INPDIS (1 << 15) /* CUG and CDG Input Disable */ - -#define CNTMODE_QUADENC (0 << CNTMODE_SHIFT) /* quadrature encoder mode */ -#define CNTMODE_BINENC (1 << CNTMODE_SHIFT) /* binary encoder mode */ -#define CNTMODE_UDCNT (2 << CNTMODE_SHIFT) /* up/down counter mode */ -#define CNTMODE_DIRCNT (4 << CNTMODE_SHIFT) /* direction counter mode */ -#define CNTMODE_DIRTMR (5 << CNTMODE_SHIFT) /* direction timer mode */ - -#define BNDMODE_COMP (0 << BNDMODE_SHIFT) /* boundary compare mode */ -#define BNDMODE_ZERO (1 << BNDMODE_SHIFT) /* boundary compare and zero mode */ -#define BNDMODE_CAPT (2 << BNDMODE_SHIFT) /* boundary capture mode */ -#define BNDMODE_AEXT (3 << BNDMODE_SHIFT) /* boundary auto-extend mode */ - -/* CNT_IMASK bitmasks */ -#define ICIE (1 << 0) /* Illegal Gray/Binary Code Interrupt Enable */ -#define UCIE (1 << 1) /* Up count Interrupt Enable */ -#define DCIE (1 << 2) /* Down count Interrupt Enable */ -#define MINCIE (1 << 3) /* Min Count Interrupt Enable */ -#define MAXCIE (1 << 4) /* Max Count Interrupt Enable */ -#define COV31IE (1 << 5) /* Bit 31 Overflow Interrupt Enable */ -#define COV15IE (1 << 6) /* Bit 15 Overflow Interrupt Enable */ -#define CZEROIE (1 << 7) /* Count to Zero Interrupt Enable */ -#define CZMIE (1 << 8) /* CZM Pin Interrupt Enable */ -#define CZMEIE (1 << 9) /* CZM Error Interrupt Enable */ -#define CZMZIE (1 << 10) /* CZM Zeroes Counter Interrupt Enable */ - -/* CNT_STATUS bitmasks */ -#define ICII (1 << 0) /* Illegal Gray/Binary Code Interrupt Identifier */ -#define UCII (1 << 1) /* Up count Interrupt Identifier */ -#define DCII (1 << 2) /* Down count Interrupt Identifier */ -#define MINCII (1 << 3) /* Min Count Interrupt Identifier */ -#define MAXCII (1 << 4) /* Max Count Interrupt Identifier */ -#define COV31II (1 << 5) /* Bit 31 Overflow Interrupt Identifier */ -#define COV15II (1 << 6) /* Bit 15 Overflow Interrupt Identifier */ -#define CZEROII (1 << 7) /* Count to Zero Interrupt Identifier */ -#define CZMII (1 << 8) /* CZM Pin Interrupt Identifier */ -#define CZMEII (1 << 9) /* CZM Error Interrupt Identifier */ -#define CZMZII (1 << 10) /* CZM Zeroes Counter Interrupt Identifier */ - -/* CNT_COMMAND bitmasks */ -#define W1LCNT 0xf /* Load Counter Register */ -#define W1LMIN 0xf0 /* Load Min Register */ -#define W1LMAX 0xf00 /* Load Max Register */ -#define W1ZMONCE (1 << 12) /* Enable CZM Clear Counter Once */ - -#define W1LCNT_ZERO (1 << 0) /* write 1 to load CNT_COUNTER with zero */ -#define W1LCNT_MIN (1 << 2) /* write 1 to load CNT_COUNTER from CNT_MIN */ -#define W1LCNT_MAX (1 << 3) /* write 1 to load CNT_COUNTER from CNT_MAX */ - -#define W1LMIN_ZERO (1 << 4) /* write 1 to load CNT_MIN with zero */ -#define W1LMIN_CNT (1 << 5) /* write 1 to load CNT_MIN from CNT_COUNTER */ -#define W1LMIN_MAX (1 << 7) /* write 1 to load CNT_MIN from CNT_MAX */ - -#define W1LMAX_ZERO (1 << 8) /* write 1 to load CNT_MAX with zero */ -#define W1LMAX_CNT (1 << 9) /* write 1 to load CNT_MAX from CNT_COUNTER */ -#define W1LMAX_MIN (1 << 10) /* write 1 to load CNT_MAX from CNT_MIN */ - -/* CNT_DEBOUNCE bitmasks */ -#define DPRESCALE 0xf /* Load Counter Register */ - -#endif -- cgit v1.2.3-58-ga151 From c6c848572f4da0e34ffe0a35364b4db871e13e42 Mon Sep 17 00:00:00 2001 From: Francis Therien Date: Mon, 26 Mar 2018 15:59:00 -0700 Subject: Input: xpad - add PDP device id 0x02a4 Adds support for a PDP Xbox One controller with device ID (0x06ef:0x02a4). The Product string for this device is "PDP Wired Controller for Xbox One - Stealth Series | Phantom Black". Signed-off-by: Francis Therien Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 9d2688f3f961..06e9650b3b30 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -227,6 +227,7 @@ static const struct xpad_device { { 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 }, @@ -475,7 +476,8 @@ static const u8 xboxone_hori_init[] = { /* * This packet is required for some of the PDP pads to start - * sending input reports. One of those pads is (0x0e6f:0x02ab). + * sending input reports. These pads include: (0x0e6f:0x02ab), + * (0x0e6f:0x02a4). */ static const u8 xboxone_pdp_init1[] = { 0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14 @@ -483,7 +485,8 @@ static const u8 xboxone_pdp_init1[] = { /* * This packet is required for some of the PDP pads to start - * sending input reports. One of those pads is (0x0e6f:0x02ab). + * sending input reports. These pads include: (0x0e6f:0x02ab), + * (0x0e6f:0x02a4). */ static const u8 xboxone_pdp_init2[] = { 0x06, 0x20, 0x00, 0x02, 0x01, 0x00 @@ -521,6 +524,8 @@ static const struct xboxone_init_packet xboxone_init_packets[] = { XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init), XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1), XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2), + XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1), + XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2), XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init), -- cgit v1.2.3-58-ga151 From 3a67ca192c2b1c67b6bbe940f4746200eb427fae Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 4 Mar 2018 21:00:39 +0100 Subject: parisc/gscps2: Fix sparse warnings Signed-off-by: Helge Deller --- drivers/input/serio/gscps2.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index aa9f29b875de..49d8d53e50b7 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -91,7 +91,7 @@ struct gscps2port { struct parisc_device *padev; struct serio *port; spinlock_t lock; - char *addr; + char __iomem *addr; u8 act, append; /* position in buffer[] */ struct { u8 data; @@ -114,7 +114,7 @@ struct gscps2port { * wait_TBE() - wait for Transmit Buffer Empty */ -static int wait_TBE(char *addr) +static int wait_TBE(char __iomem *addr) { int timeout = 25000; /* device is expected to react within 250 msec */ while (gscps2_readb_status(addr) & GSC_STAT_TBNE) { @@ -146,14 +146,14 @@ static void gscps2_flush(struct gscps2port *ps2port) static inline int gscps2_writeb_output(struct gscps2port *ps2port, u8 data) { unsigned long flags; - char *addr = ps2port->addr; + char __iomem *addr = ps2port->addr; if (!wait_TBE(addr)) { printk(KERN_DEBUG PFX "timeout - could not write byte %#x\n", data); return 0; } - while (gscps2_readb_status(ps2port->addr) & GSC_STAT_RBNE) + while (gscps2_readb_status(addr) & GSC_STAT_RBNE) /* wait */; spin_lock_irqsave(&ps2port->lock, flags); @@ -200,13 +200,12 @@ static void gscps2_enable(struct gscps2port *ps2port, int enable) static void gscps2_reset(struct gscps2port *ps2port) { - char *addr = ps2port->addr; unsigned long flags; /* reset the interface */ spin_lock_irqsave(&ps2port->lock, flags); gscps2_flush(ps2port); - writeb(0xff, addr+GSC_RESET); + writeb(0xff, ps2port->addr + GSC_RESET); gscps2_flush(ps2port); spin_unlock_irqrestore(&ps2port->lock, flags); } -- cgit v1.2.3-58-ga151 From 567b9b549cfa1cbc202762ae97b5385c29ade1e3 Mon Sep 17 00:00:00 2001 From: Masaki Ota Date: Mon, 29 Jan 2018 14:36:54 -0800 Subject: Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370 The primary interface for the touchpad device in Thinkpad L570 is SMBus, so ALPS overlooked PS2 interface Firmware setting of TrackStick, and shipped with TrackStick otp bit is disabled. The address 0xD7 contains device number information, so we can identify the device by checking this value, but to access it we need to enable Command mode, and then re-enable the device. Devices shipped in Thinkpad L570 report either 0x0C or 0x1D as device numbers, if we see them we assume that the devices are DualPoints. The same issue exists on Dell Latitude 7370. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929 Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads") Signed-off-by: Masaki Ota Tested-by: Aaron Ma Tested-by: Jonathan Liu Tested-by: Jaak Ristioja Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index dbe57da8c1a1..4a3bc168a4a7 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -2544,13 +2544,31 @@ static int alps_update_btn_info_ss4_v2(unsigned char otp[][4], } static int alps_update_dual_info_ss4_v2(unsigned char otp[][4], - struct alps_data *priv) + struct alps_data *priv, + struct psmouse *psmouse) { bool is_dual = false; + int reg_val = 0; + struct ps2dev *ps2dev = &psmouse->ps2dev; - if (IS_SS4PLUS_DEV(priv->dev_id)) + if (IS_SS4PLUS_DEV(priv->dev_id)) { is_dual = (otp[0][0] >> 4) & 0x01; + if (!is_dual) { + /* For support TrackStick of Thinkpad L/E series */ + if (alps_exit_command_mode(psmouse) == 0 && + alps_enter_command_mode(psmouse) == 0) { + reg_val = alps_command_mode_read_reg(psmouse, + 0xD7); + } + alps_exit_command_mode(psmouse); + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + + if (reg_val == 0x0C || reg_val == 0x1D) + is_dual = true; + } + } + if (is_dual) priv->flags |= ALPS_DUALPOINT | ALPS_DUALPOINT_WITH_PRESSURE; @@ -2573,7 +2591,7 @@ static int alps_set_defaults_ss4_v2(struct psmouse *psmouse, alps_update_btn_info_ss4_v2(otp, priv); - alps_update_dual_info_ss4_v2(otp, priv); + alps_update_dual_info_ss4_v2(otp, priv, psmouse); return 0; } -- cgit v1.2.3-58-ga151 From 839c42273617787318da7baf6151d553108f5e17 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 6 Apr 2018 15:36:11 -0700 Subject: Input: synaptics-rmi4 - fix an unchecked out of memory error path When extending the rmi_spi buffers, we must check that no out of memory error occurs, otherwise we may access data above the currently allocated memory. Propagate the error code returned by 'rmi_spi_manage_pools()' instead. Signed-off-by: Christophe JAILLET Reviewed-by: Andrew Duggan Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_spi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c index 76edbf2c1bce..082defc329a8 100644 --- a/drivers/input/rmi4/rmi_spi.c +++ b/drivers/input/rmi4/rmi_spi.c @@ -147,8 +147,11 @@ static int rmi_spi_xfer(struct rmi_spi_xport *rmi_spi, if (len > RMI_SPI_XFER_SIZE_LIMIT) return -EINVAL; - if (rmi_spi->xfer_buf_size < len) - rmi_spi_manage_pools(rmi_spi, len); + if (rmi_spi->xfer_buf_size < len) { + ret = rmi_spi_manage_pools(rmi_spi, len); + if (ret < 0) + return ret; + } if (addr == 0) /* -- cgit v1.2.3-58-ga151 From 6bd6ae639683c0b41f46990d5c64ff9fbfa019dc Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 6 Apr 2018 10:23:05 -0700 Subject: Input: leds - fix out of bound access UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with led > LED_CHARGING: [ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds] [ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128 This happens because we were writing to the led structure before making sure that it exists. Reported-by: Tasos Sahanidis Tested-by: Tasos Sahanidis Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/input-leds.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/input-leds.c b/drivers/input/input-leds.c index 766bf2660116..5f04b2d94635 100644 --- a/drivers/input/input-leds.c +++ b/drivers/input/input-leds.c @@ -88,6 +88,7 @@ static int input_leds_connect(struct input_handler *handler, const struct input_device_id *id) { struct input_leds *leds; + struct input_led *led; unsigned int num_leds; unsigned int led_code; int led_no; @@ -119,14 +120,13 @@ static int input_leds_connect(struct input_handler *handler, led_no = 0; for_each_set_bit(led_code, dev->ledbit, LED_CNT) { - struct input_led *led = &leds->leds[led_no]; + if (!input_led_info[led_code].name) + continue; + led = &leds->leds[led_no]; led->handle = &leds->handle; led->code = led_code; - if (!input_led_info[led_code].name) - continue; - led->cdev.name = kasprintf(GFP_KERNEL, "%s::%s", dev_name(&dev->dev), input_led_info[led_code].name); -- cgit v1.2.3-58-ga151 From 9c71b2c53bf56efa2f8aeab4247a86c0178fdcd7 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Mon, 23 Apr 2018 16:25:58 -0700 Subject: Input: alps - fix reporting pressure of v3 trackstick MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to documentation, all 7 lower bits represents trackpoint pressure. Fixes: 4621c9660459 ("Input: alps - report pressure of v3 and v7 trackstick") Signed-off-by: Pali Rohár Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 0a67f235ba88..38f9501acdf0 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -583,7 +583,7 @@ static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f)); y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f)); - z = packet[4] & 0x7c; + z = packet[4] & 0x7f; /* * The x and y values tend to be quite large, and when used -- cgit v1.2.3-58-ga151 From 6f226cff7a1e80de2a67175d26156c6354734a73 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Mon, 23 Apr 2018 12:01:21 -0700 Subject: Input: hideep_ts - fix a typo in Kconfig This patch fixes a spelling error found in Kconfig. Signed-off-by: Masanari Iida Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 4f15496fec8b..3e613afa10b4 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -362,7 +362,7 @@ config TOUCHSCREEN_HIDEEP If unsure, say N. - To compile this driver as a moudle, choose M here : the + To compile this driver as a module, choose M here : the module will be called hideep_ts. config TOUCHSCREEN_ILI210X -- cgit v1.2.3-58-ga151 From a3ed0e4393d6885b4af7ce84b437dc696490a530 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 25 Apr 2018 15:33:38 +0200 Subject: Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME Revert commits 92af4dcb4e1c ("tracing: Unify the "boot" and "mono" tracing clocks") 127bfa5f4342 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior") 7250a4047aa6 ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior") d6c7270e913d ("timekeeping: Remove boot time specific code") f2d6fdbfd238 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior") d6ed449afdb3 ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock") 72199320d49d ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock") As stated in the pull request for the unification of CLOCK_MONOTONIC and CLOCK_BOOTTIME, it was clear that we might have to revert the change. As reported by several folks systemd and other applications rely on the documented behaviour of CLOCK_MONOTONIC on Linux and break with the above changes. After resume daemons time out and other timeout related issues are observed. Rafael compiled this list: * systemd kills daemons on resume, after >WatchdogSec seconds of suspending (Genki Sky). [Verified that that's because systemd uses CLOCK_MONOTONIC and expects it to not include the suspend time.] * systemd-journald misbehaves after resume: systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal corrupted or uncleanly shut down, renaming and replacing. (Mike Galbraith). * NetworkManager reports "networking disabled" and networking is broken after resume 50% of the time (Pavel). [May be because of systemd.] * MATE desktop dims the display and starts the screensaver right after system resume (Pavel). * Full system hang during resume (me). [May be due to systemd or NM or both.] That happens on debian and open suse systems. It's sad, that these problems were neither catched in -next nor by those folks who expressed interest in this change. Reported-by: Rafael J. Wysocki Reported-by: Genki Sky , Reported-by: Pavel Machek Signed-off-by: Thomas Gleixner Cc: Dmitry Torokhov Cc: John Stultz Cc: Jonathan Corbet Cc: Kevin Easton Cc: Linus Torvalds Cc: Mark Salyzyn Cc: Michael Kerrisk Cc: Peter Zijlstra Cc: Petr Mladek Cc: Prarit Bhargava Cc: Sergey Senozhatsky Cc: Steven Rostedt --- Documentation/trace/ftrace.rst | 14 +++++-- drivers/input/evdev.c | 7 +++- include/linux/hrtimer.h | 2 + include/linux/timekeeper_internal.h | 2 - include/linux/timekeeping.h | 37 ++++++++++++------ include/uapi/linux/time.h | 1 - kernel/time/hrtimer.c | 16 +++++++- kernel/time/posix-stubs.c | 2 - kernel/time/posix-timers.c | 26 ++++++++----- kernel/time/tick-common.c | 15 ------- kernel/time/tick-internal.h | 6 --- kernel/time/tick-sched.c | 9 ----- kernel/time/timekeeping.c | 78 ++++++++++++++++++------------------- kernel/time/timekeeping.h | 1 + kernel/trace/trace.c | 2 +- 15 files changed, 114 insertions(+), 104 deletions(-) (limited to 'drivers/input') diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index e45f0786f3f9..67d9c38e95eb 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -461,9 +461,17 @@ of ftrace. Here is a list of some of the key files: and ticks at the same rate as the hardware clocksource. boot: - Same as mono. Used to be a separate clock which accounted - for the time spent in suspend while CLOCK_MONOTONIC did - not. + This is the boot clock (CLOCK_BOOTTIME) and is based on the + fast monotonic clock, but also accounts for time spent in + suspend. Since the clock access is designed for use in + tracing in the suspend path, some side effects are possible + if clock is accessed after the suspend time is accounted before + the fast mono clock is updated. In this case, the clock update + appears to happen slightly sooner than it normally would have. + Also on 32-bit systems, it's possible that the 64-bit boot offset + sees a partial update. These effects are rare and post + processing should be able to handle them. See comments in the + ktime_get_boot_fast_ns() function for more information. To set a clock, simply echo the clock name into this file:: diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 46115a392098..c81c79d01d93 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -31,6 +31,7 @@ enum evdev_clock_type { EV_CLK_REAL = 0, EV_CLK_MONO, + EV_CLK_BOOT, EV_CLK_MAX }; @@ -197,10 +198,12 @@ static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid) case CLOCK_REALTIME: clk_type = EV_CLK_REAL; break; - case CLOCK_BOOTTIME: case CLOCK_MONOTONIC: clk_type = EV_CLK_MONO; break; + case CLOCK_BOOTTIME: + clk_type = EV_CLK_BOOT; + break; default: return -EINVAL; } @@ -311,6 +314,8 @@ static void evdev_events(struct input_handle *handle, ev_time[EV_CLK_MONO] = ktime_get(); ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]); + ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO], + TK_OFFS_BOOT); rcu_read_lock(); diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index a2656c3ebe81..3892e9c8b2de 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -161,9 +161,11 @@ struct hrtimer_clock_base { enum hrtimer_base_type { HRTIMER_BASE_MONOTONIC, HRTIMER_BASE_REALTIME, + HRTIMER_BASE_BOOTTIME, HRTIMER_BASE_TAI, HRTIMER_BASE_MONOTONIC_SOFT, HRTIMER_BASE_REALTIME_SOFT, + HRTIMER_BASE_BOOTTIME_SOFT, HRTIMER_BASE_TAI_SOFT, HRTIMER_MAX_CLOCK_BASES, }; diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h index 4b3dca173e89..7acb953298a7 100644 --- a/include/linux/timekeeper_internal.h +++ b/include/linux/timekeeper_internal.h @@ -52,7 +52,6 @@ struct tk_read_base { * @offs_real: Offset clock monotonic -> clock realtime * @offs_boot: Offset clock monotonic -> clock boottime * @offs_tai: Offset clock monotonic -> clock tai - * @time_suspended: Accumulated suspend time * @tai_offset: The current UTC to TAI offset in seconds * @clock_was_set_seq: The sequence number of clock was set events * @cs_was_changed_seq: The sequence number of clocksource change events @@ -95,7 +94,6 @@ struct timekeeper { ktime_t offs_real; ktime_t offs_boot; ktime_t offs_tai; - ktime_t time_suspended; s32 tai_offset; unsigned int clock_was_set_seq; u8 cs_was_changed_seq; diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h index 9737fbec7019..588a0e4b1ab9 100644 --- a/include/linux/timekeeping.h +++ b/include/linux/timekeeping.h @@ -33,25 +33,20 @@ extern void ktime_get_ts64(struct timespec64 *ts); extern time64_t ktime_get_seconds(void); extern time64_t __ktime_get_real_seconds(void); extern time64_t ktime_get_real_seconds(void); -extern void ktime_get_active_ts64(struct timespec64 *ts); extern int __getnstimeofday64(struct timespec64 *tv); extern void getnstimeofday64(struct timespec64 *tv); extern void getboottime64(struct timespec64 *ts); -#define ktime_get_real_ts64(ts) getnstimeofday64(ts) - -/* Clock BOOTTIME compatibility wrappers */ -static inline void get_monotonic_boottime64(struct timespec64 *ts) -{ - ktime_get_ts64(ts); -} +#define ktime_get_real_ts64(ts) getnstimeofday64(ts) /* * ktime_t based interfaces */ + enum tk_offsets { TK_OFFS_REAL, + TK_OFFS_BOOT, TK_OFFS_TAI, TK_OFFS_MAX, }; @@ -62,10 +57,6 @@ extern ktime_t ktime_mono_to_any(ktime_t tmono, enum tk_offsets offs); extern ktime_t ktime_get_raw(void); extern u32 ktime_get_resolution_ns(void); -/* Clock BOOTTIME compatibility wrappers */ -static inline ktime_t ktime_get_boottime(void) { return ktime_get(); } -static inline u64 ktime_get_boot_ns(void) { return ktime_get(); } - /** * ktime_get_real - get the real (wall-) time in ktime_t format */ @@ -74,6 +65,17 @@ static inline ktime_t ktime_get_real(void) return ktime_get_with_offset(TK_OFFS_REAL); } +/** + * ktime_get_boottime - Returns monotonic time since boot in ktime_t format + * + * This is similar to CLOCK_MONTONIC/ktime_get, but also includes the + * time spent in suspend. + */ +static inline ktime_t ktime_get_boottime(void) +{ + return ktime_get_with_offset(TK_OFFS_BOOT); +} + /** * ktime_get_clocktai - Returns the TAI time of day in ktime_t format */ @@ -100,6 +102,11 @@ static inline u64 ktime_get_real_ns(void) return ktime_to_ns(ktime_get_real()); } +static inline u64 ktime_get_boot_ns(void) +{ + return ktime_to_ns(ktime_get_boottime()); +} + static inline u64 ktime_get_tai_ns(void) { return ktime_to_ns(ktime_get_clocktai()); @@ -112,11 +119,17 @@ static inline u64 ktime_get_raw_ns(void) extern u64 ktime_get_mono_fast_ns(void); extern u64 ktime_get_raw_fast_ns(void); +extern u64 ktime_get_boot_fast_ns(void); extern u64 ktime_get_real_fast_ns(void); /* * timespec64 interfaces utilizing the ktime based ones */ +static inline void get_monotonic_boottime64(struct timespec64 *ts) +{ + *ts = ktime_to_timespec64(ktime_get_boottime()); +} + static inline void timekeeping_clocktai64(struct timespec64 *ts) { *ts = ktime_to_timespec64(ktime_get_clocktai()); diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h index 16a296612ba4..4c0338ea308a 100644 --- a/include/uapi/linux/time.h +++ b/include/uapi/linux/time.h @@ -73,7 +73,6 @@ struct __kernel_old_timeval { */ #define CLOCK_SGI_CYCLE 10 #define CLOCK_TAI 11 -#define CLOCK_MONOTONIC_ACTIVE 12 #define MAX_CLOCKS 16 #define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC) diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index eda1210ce50f..14e858753d76 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -90,6 +90,11 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = .clockid = CLOCK_REALTIME, .get_time = &ktime_get_real, }, + { + .index = HRTIMER_BASE_BOOTTIME, + .clockid = CLOCK_BOOTTIME, + .get_time = &ktime_get_boottime, + }, { .index = HRTIMER_BASE_TAI, .clockid = CLOCK_TAI, @@ -105,6 +110,11 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = .clockid = CLOCK_REALTIME, .get_time = &ktime_get_real, }, + { + .index = HRTIMER_BASE_BOOTTIME_SOFT, + .clockid = CLOCK_BOOTTIME, + .get_time = &ktime_get_boottime, + }, { .index = HRTIMER_BASE_TAI_SOFT, .clockid = CLOCK_TAI, @@ -119,7 +129,7 @@ static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = { [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME, [CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC, - [CLOCK_BOOTTIME] = HRTIMER_BASE_MONOTONIC, + [CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME, [CLOCK_TAI] = HRTIMER_BASE_TAI, }; @@ -571,12 +581,14 @@ __hrtimer_get_next_event(struct hrtimer_cpu_base *cpu_base, unsigned int active_ static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base) { ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset; + ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset; ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset; ktime_t now = ktime_get_update_offsets_now(&base->clock_was_set_seq, - offs_real, offs_tai); + offs_real, offs_boot, offs_tai); base->clock_base[HRTIMER_BASE_REALTIME_SOFT].offset = *offs_real; + base->clock_base[HRTIMER_BASE_BOOTTIME_SOFT].offset = *offs_boot; base->clock_base[HRTIMER_BASE_TAI_SOFT].offset = *offs_tai; return now; diff --git a/kernel/time/posix-stubs.c b/kernel/time/posix-stubs.c index e0dbae98db9d..69a937c3cd81 100644 --- a/kernel/time/posix-stubs.c +++ b/kernel/time/posix-stubs.c @@ -83,8 +83,6 @@ int do_clock_gettime(clockid_t which_clock, struct timespec64 *tp) case CLOCK_BOOTTIME: get_monotonic_boottime64(tp); break; - case CLOCK_MONOTONIC_ACTIVE: - ktime_get_active_ts64(tp); default: return -EINVAL; } diff --git a/kernel/time/posix-timers.c b/kernel/time/posix-timers.c index b6899b5060bd..10b7186d0638 100644 --- a/kernel/time/posix-timers.c +++ b/kernel/time/posix-timers.c @@ -252,16 +252,15 @@ static int posix_get_coarse_res(const clockid_t which_clock, struct timespec64 * return 0; } -static int posix_get_tai(clockid_t which_clock, struct timespec64 *tp) +static int posix_get_boottime(const clockid_t which_clock, struct timespec64 *tp) { - timekeeping_clocktai64(tp); + get_monotonic_boottime64(tp); return 0; } -static int posix_get_monotonic_active(clockid_t which_clock, - struct timespec64 *tp) +static int posix_get_tai(clockid_t which_clock, struct timespec64 *tp) { - ktime_get_active_ts64(tp); + timekeeping_clocktai64(tp); return 0; } @@ -1317,9 +1316,19 @@ static const struct k_clock clock_tai = { .timer_arm = common_hrtimer_arm, }; -static const struct k_clock clock_monotonic_active = { +static const struct k_clock clock_boottime = { .clock_getres = posix_get_hrtimer_res, - .clock_get = posix_get_monotonic_active, + .clock_get = posix_get_boottime, + .nsleep = common_nsleep, + .timer_create = common_timer_create, + .timer_set = common_timer_set, + .timer_get = common_timer_get, + .timer_del = common_timer_del, + .timer_rearm = common_hrtimer_rearm, + .timer_forward = common_hrtimer_forward, + .timer_remaining = common_hrtimer_remaining, + .timer_try_to_cancel = common_hrtimer_try_to_cancel, + .timer_arm = common_hrtimer_arm, }; static const struct k_clock * const posix_clocks[] = { @@ -1330,11 +1339,10 @@ static const struct k_clock * const posix_clocks[] = { [CLOCK_MONOTONIC_RAW] = &clock_monotonic_raw, [CLOCK_REALTIME_COARSE] = &clock_realtime_coarse, [CLOCK_MONOTONIC_COARSE] = &clock_monotonic_coarse, - [CLOCK_BOOTTIME] = &clock_monotonic, + [CLOCK_BOOTTIME] = &clock_boottime, [CLOCK_REALTIME_ALARM] = &alarm_clock, [CLOCK_BOOTTIME_ALARM] = &alarm_clock, [CLOCK_TAI] = &clock_tai, - [CLOCK_MONOTONIC_ACTIVE] = &clock_monotonic_active, }; static const struct k_clock *clockid_to_kclock(const clockid_t id) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 099572ca4a8f..49edc1c4f3e6 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -419,19 +419,6 @@ void tick_suspend_local(void) clockevents_shutdown(td->evtdev); } -static void tick_forward_next_period(void) -{ - ktime_t delta, now = ktime_get(); - u64 n; - - delta = ktime_sub(now, tick_next_period); - n = ktime_divns(delta, tick_period); - tick_next_period += n * tick_period; - if (tick_next_period < now) - tick_next_period += tick_period; - tick_sched_forward_next_period(); -} - /** * tick_resume_local - Resume the local tick device * @@ -444,8 +431,6 @@ void tick_resume_local(void) struct tick_device *td = this_cpu_ptr(&tick_cpu_device); bool broadcast = tick_resume_check_broadcast(); - tick_forward_next_period(); - clockevents_tick_resume(td->evtdev); if (!broadcast) { if (td->mode == TICKDEV_MODE_PERIODIC) diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index 21efab7485ca..e277284c2831 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -141,12 +141,6 @@ static inline void tick_check_oneshot_broadcast_this_cpu(void) { } static inline bool tick_broadcast_oneshot_available(void) { return tick_oneshot_possible(); } #endif /* !(BROADCAST && ONESHOT) */ -#if defined(CONFIG_NO_HZ_COMMON) || defined(CONFIG_HIGH_RES_TIMERS) -extern void tick_sched_forward_next_period(void); -#else -static inline void tick_sched_forward_next_period(void) { } -#endif - /* NO_HZ_FULL internal */ #ifdef CONFIG_NO_HZ_FULL extern void tick_nohz_init(void); diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index d31bec177fa5..da9455a6b42b 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -51,15 +51,6 @@ struct tick_sched *tick_get_tick_sched(int cpu) */ static ktime_t last_jiffies_update; -/* - * Called after resume. Make sure that jiffies are not fast forwarded due to - * clock monotonic being forwarded by the suspended time. - */ -void tick_sched_forward_next_period(void) -{ - last_jiffies_update = tick_next_period; -} - /* * Must be called with interrupts disabled ! */ diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index dcf7f20fcd12..49cbceef5deb 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -138,12 +138,7 @@ static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec64 wtm) static inline void tk_update_sleep_time(struct timekeeper *tk, ktime_t delta) { - /* Update both bases so mono and raw stay coupled. */ - tk->tkr_mono.base += delta; - tk->tkr_raw.base += delta; - - /* Accumulate time spent in suspend */ - tk->time_suspended += delta; + tk->offs_boot = ktime_add(tk->offs_boot, delta); } /* @@ -473,6 +468,36 @@ u64 ktime_get_raw_fast_ns(void) } EXPORT_SYMBOL_GPL(ktime_get_raw_fast_ns); +/** + * ktime_get_boot_fast_ns - NMI safe and fast access to boot clock. + * + * To keep it NMI safe since we're accessing from tracing, we're not using a + * separate timekeeper with updates to monotonic clock and boot offset + * protected with seqlocks. This has the following minor side effects: + * + * (1) Its possible that a timestamp be taken after the boot offset is updated + * but before the timekeeper is updated. If this happens, the new boot offset + * is added to the old timekeeping making the clock appear to update slightly + * earlier: + * CPU 0 CPU 1 + * timekeeping_inject_sleeptime64() + * __timekeeping_inject_sleeptime(tk, delta); + * timestamp(); + * timekeeping_update(tk, TK_CLEAR_NTP...); + * + * (2) On 32-bit systems, the 64-bit boot offset (tk->offs_boot) may be + * partially updated. Since the tk->offs_boot update is a rare event, this + * should be a rare occurrence which postprocessing should be able to handle. + */ +u64 notrace ktime_get_boot_fast_ns(void) +{ + struct timekeeper *tk = &tk_core.timekeeper; + + return (ktime_get_mono_fast_ns() + ktime_to_ns(tk->offs_boot)); +} +EXPORT_SYMBOL_GPL(ktime_get_boot_fast_ns); + + /* * See comment for __ktime_get_fast_ns() vs. timestamp ordering */ @@ -764,6 +789,7 @@ EXPORT_SYMBOL_GPL(ktime_get_resolution_ns); static ktime_t *offsets[TK_OFFS_MAX] = { [TK_OFFS_REAL] = &tk_core.timekeeper.offs_real, + [TK_OFFS_BOOT] = &tk_core.timekeeper.offs_boot, [TK_OFFS_TAI] = &tk_core.timekeeper.offs_tai, }; @@ -860,39 +886,6 @@ void ktime_get_ts64(struct timespec64 *ts) } EXPORT_SYMBOL_GPL(ktime_get_ts64); -/** - * ktime_get_active_ts64 - Get the active non-suspended monotonic clock - * @ts: pointer to timespec variable - * - * The function calculates the monotonic clock from the realtime clock and - * the wall_to_monotonic offset, subtracts the accumulated suspend time and - * stores the result in normalized timespec64 format in the variable - * pointed to by @ts. - */ -void ktime_get_active_ts64(struct timespec64 *ts) -{ - struct timekeeper *tk = &tk_core.timekeeper; - struct timespec64 tomono, tsusp; - u64 nsec, nssusp; - unsigned int seq; - - WARN_ON(timekeeping_suspended); - - do { - seq = read_seqcount_begin(&tk_core.seq); - ts->tv_sec = tk->xtime_sec; - nsec = timekeeping_get_ns(&tk->tkr_mono); - tomono = tk->wall_to_monotonic; - nssusp = tk->time_suspended; - } while (read_seqcount_retry(&tk_core.seq, seq)); - - ts->tv_sec += tomono.tv_sec; - ts->tv_nsec = 0; - timespec64_add_ns(ts, nsec + tomono.tv_nsec); - tsusp = ns_to_timespec64(nssusp); - *ts = timespec64_sub(*ts, tsusp); -} - /** * ktime_get_seconds - Get the seconds portion of CLOCK_MONOTONIC * @@ -1593,6 +1586,7 @@ static void __timekeeping_inject_sleeptime(struct timekeeper *tk, return; } tk_xtime_add(tk, delta); + tk_set_wall_to_mono(tk, timespec64_sub(tk->wall_to_monotonic, *delta)); tk_update_sleep_time(tk, timespec64_to_ktime(*delta)); tk_debug_account_sleep_time(delta); } @@ -2125,7 +2119,7 @@ out: void getboottime64(struct timespec64 *ts) { struct timekeeper *tk = &tk_core.timekeeper; - ktime_t t = ktime_sub(tk->offs_real, tk->time_suspended); + ktime_t t = ktime_sub(tk->offs_real, tk->offs_boot); *ts = ktime_to_timespec64(t); } @@ -2188,6 +2182,7 @@ void do_timer(unsigned long ticks) * ktime_get_update_offsets_now - hrtimer helper * @cwsseq: pointer to check and store the clock was set sequence number * @offs_real: pointer to storage for monotonic -> realtime offset + * @offs_boot: pointer to storage for monotonic -> boottime offset * @offs_tai: pointer to storage for monotonic -> clock tai offset * * Returns current monotonic time and updates the offsets if the @@ -2197,7 +2192,7 @@ void do_timer(unsigned long ticks) * Called from hrtimer_interrupt() or retrigger_next_event() */ ktime_t ktime_get_update_offsets_now(unsigned int *cwsseq, ktime_t *offs_real, - ktime_t *offs_tai) + ktime_t *offs_boot, ktime_t *offs_tai) { struct timekeeper *tk = &tk_core.timekeeper; unsigned int seq; @@ -2214,6 +2209,7 @@ ktime_t ktime_get_update_offsets_now(unsigned int *cwsseq, ktime_t *offs_real, if (*cwsseq != tk->clock_was_set_seq) { *cwsseq = tk->clock_was_set_seq; *offs_real = tk->offs_real; + *offs_boot = tk->offs_boot; *offs_tai = tk->offs_tai; } diff --git a/kernel/time/timekeeping.h b/kernel/time/timekeeping.h index 79b67f5e0343..7a9b4eb7a1d5 100644 --- a/kernel/time/timekeeping.h +++ b/kernel/time/timekeeping.h @@ -6,6 +6,7 @@ */ extern ktime_t ktime_get_update_offsets_now(unsigned int *cwsseq, ktime_t *offs_real, + ktime_t *offs_boot, ktime_t *offs_tai); extern int timekeeping_valid_for_hres(void); diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index dfbcf9ee1447..414d7210b2ec 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1165,7 +1165,7 @@ static struct { { trace_clock, "perf", 1 }, { ktime_get_mono_fast_ns, "mono", 1 }, { ktime_get_raw_fast_ns, "mono_raw", 1 }, - { ktime_get_mono_fast_ns, "boot", 1 }, + { ktime_get_boot_fast_ns, "boot", 1 }, ARCH_TRACE_CLOCKS }; -- cgit v1.2.3-58-ga151 From f372b81101e6895252298e563d634d5e44ae81e7 Mon Sep 17 00:00:00 2001 From: "Vittorio Gambaletta (VittGam)" Date: Wed, 25 Apr 2018 15:22:13 -0700 Subject: Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro This patch adds the correct platform data information for the Caroline Chromebook, so that the mouse button does not get stuck in pressed state after the first click. The Samus button keymap and platform data definition are the correct ones for Caroline, so they have been reused here. Signed-off-by: Vittorio Gambaletta Signed-off-by: Salvatore Bellizzi Tested-by: Guenter Roeck Cc: stable@vger.kernel.org [dtor: adjusted vendor spelling to match shipping firmware] Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/atmel_mxt_ts.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 7659bc48f1db..429b694405c7 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -3030,6 +3030,15 @@ static const struct dmi_system_id mxt_dmi_table[] = { }, .driver_data = samus_platform_data, }, + { + /* Samsung Chromebook Pro */ + .ident = "Samsung Chromebook Pro", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Google"), + DMI_MATCH(DMI_PRODUCT_NAME, "Caroline"), + }, + .driver_data = samus_platform_data, + }, { /* Other Google Chromebooks */ .ident = "Chromebook", -- cgit v1.2.3-58-ga151 From 068bdb67ef74df0ad1627b7247a163e3e252ac11 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Tue, 1 May 2018 11:40:18 -0700 Subject: Input: atmel_mxt_ts - fix the firmware update The automatic update mechanism will trigger an update if the info block CRCs are different between maxtouch configuration file (maxtouch.cfg) and chip. The driver compared the CRCs without retrieving the chip CRC, resulting always in a failure and firmware flashing action triggered. Fix this issue by retrieving the chip info block CRC before the check. Note that this solution has the benefit that by reading the information block and the object table into a contiguous region of memory, we can verify the checksum at probe time. This means we make sure that we are indeed talking to a chip that supports object protocol correctly. Using this patch on a kevin chromebook, the touchscreen and touchpad drivers are able to match the CRC: atmel_mxt_ts 3-004b: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40 atmel_mxt_ts 5-004a: Family: 164 Variant: 17 Firmware V2.0.AA Objects: 31 atmel_mxt_ts 3-004b: Resetting device atmel_mxt_ts 5-004a: Resetting device atmel_mxt_ts 3-004b: Config CRC 0x573E89: OK atmel_mxt_ts 3-004b: Touchscreen size X4095Y2729 input: Atmel maXTouch Touchscreen as /devices/platform/ff130000.i2c/i2c-3/3-004b/input/input5 atmel_mxt_ts 5-004a: Config CRC 0x0AF6BA: OK atmel_mxt_ts 5-004a: Touchscreen size X1920Y1080 input: Atmel maXTouch Touchpad as /devices/platform/ff140000.i2c/i2c-5/5-004a/input/input6 Signed-off-by: Nick Dyer Acked-by: Benson Leung [Ezequiel: minor patch massage] Signed-off-by: Ezequiel Garcia Tested-by: Sebastian Reichel Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/atmel_mxt_ts.c | 186 ++++++++++++++++++------------- 1 file changed, 110 insertions(+), 76 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 429b694405c7..fc149ea64be7 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -275,7 +275,8 @@ struct mxt_data { char phys[64]; /* device physical location */ const struct mxt_platform_data *pdata; struct mxt_object *object_table; - struct mxt_info info; + struct mxt_info *info; + void *raw_info_block; unsigned int irq; unsigned int max_x; unsigned int max_y; @@ -450,12 +451,13 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry) { u8 appmode = data->client->addr; u8 bootloader; + u8 family_id = data->info ? data->info->family_id : 0; switch (appmode) { case 0x4a: case 0x4b: /* Chips after 1664S use different scheme */ - if (retry || data->info.family_id >= 0xa2) { + if (retry || family_id >= 0xa2) { bootloader = appmode - 0x24; break; } @@ -682,7 +684,7 @@ mxt_get_object(struct mxt_data *data, u8 type) struct mxt_object *object; int i; - for (i = 0; i < data->info.object_num; i++) { + for (i = 0; i < data->info->object_num; i++) { object = data->object_table + i; if (object->type == type) return object; @@ -1453,12 +1455,12 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) data_pos += offset; } - if (cfg_info.family_id != data->info.family_id) { + if (cfg_info.family_id != data->info->family_id) { dev_err(dev, "Family ID mismatch!\n"); return -EINVAL; } - if (cfg_info.variant_id != data->info.variant_id) { + if (cfg_info.variant_id != data->info->variant_id) { dev_err(dev, "Variant ID mismatch!\n"); return -EINVAL; } @@ -1503,7 +1505,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) /* Malloc memory to store configuration */ cfg_start_ofs = MXT_OBJECT_START + - data->info.object_num * sizeof(struct mxt_object) + + data->info->object_num * sizeof(struct mxt_object) + MXT_INFO_CHECKSUM_SIZE; config_mem_size = data->mem_size - cfg_start_ofs; config_mem = kzalloc(config_mem_size, GFP_KERNEL); @@ -1554,20 +1556,6 @@ release_mem: return ret; } -static int mxt_get_info(struct mxt_data *data) -{ - struct i2c_client *client = data->client; - struct mxt_info *info = &data->info; - int error; - - /* Read 7-byte info block starting at address 0 */ - error = __mxt_read_reg(client, 0, sizeof(*info), info); - if (error) - return error; - - return 0; -} - static void mxt_free_input_device(struct mxt_data *data) { if (data->input_dev) { @@ -1582,9 +1570,10 @@ static void mxt_free_object_table(struct mxt_data *data) video_unregister_device(&data->dbg.vdev); v4l2_device_unregister(&data->dbg.v4l2); #endif - - kfree(data->object_table); data->object_table = NULL; + data->info = NULL; + kfree(data->raw_info_block); + data->raw_info_block = NULL; kfree(data->msg_buf); data->msg_buf = NULL; data->T5_address = 0; @@ -1600,34 +1589,18 @@ static void mxt_free_object_table(struct mxt_data *data) data->max_reportid = 0; } -static int mxt_get_object_table(struct mxt_data *data) +static int mxt_parse_object_table(struct mxt_data *data, + struct mxt_object *object_table) { struct i2c_client *client = data->client; - size_t table_size; - struct mxt_object *object_table; - int error; int i; u8 reportid; u16 end_address; - table_size = data->info.object_num * sizeof(struct mxt_object); - object_table = kzalloc(table_size, GFP_KERNEL); - if (!object_table) { - dev_err(&data->client->dev, "Failed to allocate memory\n"); - return -ENOMEM; - } - - error = __mxt_read_reg(client, MXT_OBJECT_START, table_size, - object_table); - if (error) { - kfree(object_table); - return error; - } - /* Valid Report IDs start counting from 1 */ reportid = 1; data->mem_size = 0; - for (i = 0; i < data->info.object_num; i++) { + for (i = 0; i < data->info->object_num; i++) { struct mxt_object *object = object_table + i; u8 min_id, max_id; @@ -1651,8 +1624,8 @@ static int mxt_get_object_table(struct mxt_data *data) switch (object->type) { case MXT_GEN_MESSAGE_T5: - if (data->info.family_id == 0x80 && - data->info.version < 0x20) { + if (data->info->family_id == 0x80 && + data->info->version < 0x20) { /* * On mXT224 firmware versions prior to V2.0 * read and discard unused CRC byte otherwise @@ -1707,24 +1680,102 @@ static int mxt_get_object_table(struct mxt_data *data) /* If T44 exists, T5 position has to be directly after */ if (data->T44_address && (data->T5_address != data->T44_address + 1)) { dev_err(&client->dev, "Invalid T44 position\n"); - error = -EINVAL; - goto free_object_table; + return -EINVAL; } data->msg_buf = kcalloc(data->max_reportid, data->T5_msg_size, GFP_KERNEL); - if (!data->msg_buf) { - dev_err(&client->dev, "Failed to allocate message buffer\n"); + if (!data->msg_buf) + return -ENOMEM; + + return 0; +} + +static int mxt_read_info_block(struct mxt_data *data) +{ + struct i2c_client *client = data->client; + int error; + size_t size; + void *id_buf, *buf; + uint8_t num_objects; + u32 calculated_crc; + u8 *crc_ptr; + + /* If info block already allocated, free it */ + if (data->raw_info_block) + mxt_free_object_table(data); + + /* Read 7-byte ID information block starting at address 0 */ + size = sizeof(struct mxt_info); + id_buf = kzalloc(size, GFP_KERNEL); + if (!id_buf) + return -ENOMEM; + + error = __mxt_read_reg(client, 0, size, id_buf); + if (error) + goto err_free_mem; + + /* Resize buffer to give space for rest of info block */ + num_objects = ((struct mxt_info *)id_buf)->object_num; + size += (num_objects * sizeof(struct mxt_object)) + + MXT_INFO_CHECKSUM_SIZE; + + buf = krealloc(id_buf, size, GFP_KERNEL); + if (!buf) { error = -ENOMEM; - goto free_object_table; + goto err_free_mem; + } + id_buf = buf; + + /* Read rest of info block */ + error = __mxt_read_reg(client, MXT_OBJECT_START, + size - MXT_OBJECT_START, + id_buf + MXT_OBJECT_START); + if (error) + goto err_free_mem; + + /* Extract & calculate checksum */ + crc_ptr = id_buf + size - MXT_INFO_CHECKSUM_SIZE; + data->info_crc = crc_ptr[0] | (crc_ptr[1] << 8) | (crc_ptr[2] << 16); + + calculated_crc = mxt_calculate_crc(id_buf, 0, + size - MXT_INFO_CHECKSUM_SIZE); + + /* + * CRC mismatch can be caused by data corruption due to I2C comms + * issue or else device is not using Object Based Protocol (eg i2c-hid) + */ + if ((data->info_crc == 0) || (data->info_crc != calculated_crc)) { + dev_err(&client->dev, + "Info Block CRC error calculated=0x%06X read=0x%06X\n", + calculated_crc, data->info_crc); + error = -EIO; + goto err_free_mem; + } + + data->raw_info_block = id_buf; + data->info = (struct mxt_info *)id_buf; + + dev_info(&client->dev, + "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n", + data->info->family_id, data->info->variant_id, + data->info->version >> 4, data->info->version & 0xf, + data->info->build, data->info->object_num); + + /* Parse object table information */ + error = mxt_parse_object_table(data, id_buf + MXT_OBJECT_START); + if (error) { + dev_err(&client->dev, "Error %d parsing object table\n", error); + mxt_free_object_table(data); + goto err_free_mem; } - data->object_table = object_table; + data->object_table = (struct mxt_object *)(id_buf + MXT_OBJECT_START); return 0; -free_object_table: - mxt_free_object_table(data); +err_free_mem: + kfree(id_buf); return error; } @@ -2039,7 +2090,7 @@ static int mxt_initialize(struct mxt_data *data) int error; while (1) { - error = mxt_get_info(data); + error = mxt_read_info_block(data); if (!error) break; @@ -2070,16 +2121,9 @@ static int mxt_initialize(struct mxt_data *data) msleep(MXT_FW_RESET_TIME); } - /* Get object table information */ - error = mxt_get_object_table(data); - if (error) { - dev_err(&client->dev, "Error %d reading object table\n", error); - return error; - } - error = mxt_acquire_irq(data); if (error) - goto err_free_object_table; + return error; error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME, &client->dev, GFP_KERNEL, data, @@ -2087,14 +2131,10 @@ static int mxt_initialize(struct mxt_data *data) if (error) { dev_err(&client->dev, "Failed to invoke firmware loader: %d\n", error); - goto err_free_object_table; + return error; } return 0; - -err_free_object_table: - mxt_free_object_table(data); - return error; } static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep) @@ -2155,7 +2195,7 @@ recheck: static u16 mxt_get_debug_value(struct mxt_data *data, unsigned int x, unsigned int y) { - struct mxt_info *info = &data->info; + struct mxt_info *info = data->info; struct mxt_dbg *dbg = &data->dbg; unsigned int ofs, page; unsigned int col = 0; @@ -2483,7 +2523,7 @@ static const struct video_device mxt_video_device = { static void mxt_debug_init(struct mxt_data *data) { - struct mxt_info *info = &data->info; + struct mxt_info *info = data->info; struct mxt_dbg *dbg = &data->dbg; struct mxt_object *object; int error; @@ -2569,7 +2609,6 @@ static int mxt_configure_objects(struct mxt_data *data, const struct firmware *cfg) { struct device *dev = &data->client->dev; - struct mxt_info *info = &data->info; int error; error = mxt_init_t7_power_cfg(data); @@ -2594,11 +2633,6 @@ static int mxt_configure_objects(struct mxt_data *data, mxt_debug_init(data); - dev_info(dev, - "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n", - info->family_id, info->variant_id, info->version >> 4, - info->version & 0xf, info->build, info->object_num); - return 0; } @@ -2607,7 +2641,7 @@ static ssize_t mxt_fw_version_show(struct device *dev, struct device_attribute *attr, char *buf) { struct mxt_data *data = dev_get_drvdata(dev); - struct mxt_info *info = &data->info; + struct mxt_info *info = data->info; return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n", info->version >> 4, info->version & 0xf, info->build); } @@ -2617,7 +2651,7 @@ static ssize_t mxt_hw_version_show(struct device *dev, struct device_attribute *attr, char *buf) { struct mxt_data *data = dev_get_drvdata(dev); - struct mxt_info *info = &data->info; + struct mxt_info *info = data->info; return scnprintf(buf, PAGE_SIZE, "%u.%u\n", info->family_id, info->variant_id); } @@ -2656,7 +2690,7 @@ static ssize_t mxt_object_show(struct device *dev, return -ENOMEM; error = 0; - for (i = 0; i < data->info.object_num; i++) { + for (i = 0; i < data->info->object_num; i++) { object = data->object_table + i; if (!mxt_object_readable(object->type)) -- cgit v1.2.3-58-ga151 From f6eeb9e548572c0e64632672dbd04363cbdd4eed Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 1 May 2018 11:44:53 -0700 Subject: Input: atmel_mxt_ts - add missing compatible strings to OF device table Commit af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF") fixed how the I2C core reports the module alias when devices are registered via OF. But the atmel_mxt_ts driver only has an "atmel,maxtouch" compatible in its OF device ID table, so if a Device Tree is using a different one, autoload won't be working for the module (the matching works because the I2C device ID table is used as a fallback). So add compatible strings for each of the entries in the I2C device table. Fixes: af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF") Reported-by: Enric Balletbo i Serra Signed-off-by: Javier Martinez Canillas Tested-by: Enric Balletbo i Serra Reviewed-by: Rob Herring [dtor: document which compatibles are deprecated and should not be used] Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/atmel,maxtouch.txt | 7 +++++++ drivers/input/touchscreen/atmel_mxt_ts.c | 5 +++++ 2 files changed, 12 insertions(+) (limited to 'drivers/input') diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt index 23e3abc3fdef..c88919480d37 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt @@ -4,6 +4,13 @@ Required properties: - compatible: atmel,maxtouch + The following compatibles have been used in various products but are + deprecated: + atmel,qt602240_ts + atmel,atmel_mxt_ts + atmel,atmel_mxt_tp + atmel,mXT224 + - reg: The I2C address of the device - interrupts: The sink for the touchpad's IRQ output diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index fc149ea64be7..f04e4fbf39c1 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -3282,6 +3282,11 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume); static const struct of_device_id mxt_of_match[] = { { .compatible = "atmel,maxtouch", }, + /* Compatibles listed below are deprecated */ + { .compatible = "atmel,qt602240_ts", }, + { .compatible = "atmel,atmel_mxt_ts", }, + { .compatible = "atmel,atmel_mxt_tp", }, + { .compatible = "atmel,mXT224", }, {}, }; MODULE_DEVICE_TABLE(of, mxt_of_match); -- cgit v1.2.3-58-ga151